/* SPU target-dependent code for GDB, the GNU debugger.
- Copyright (C) 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+ Copyright (C) 2006, 2007, 2008, 2009, 2010, 2011
+ Free Software Foundation, Inc.
Contributed by Ulrich Weigand <uweigand@de.ibm.com>.
Based on a port by Sid Manning <sid@us.ibm.com>.
return builtin_type (gdbarch)->builtin_uint32;
default:
- internal_error (__FILE__, __LINE__, "invalid regnum");
+ internal_error (__FILE__, __LINE__, _("invalid regnum"));
}
}
return id;
}
-static ULONGEST
-spu_lslr (int id)
-{
- gdb_byte buf[32];
- char annex[32];
-
- if (id == -1)
- return SPU_LS_SIZE - 1;
-
- xsnprintf (annex, sizeof annex, "%d/lslr", id);
- memset (buf, 0, sizeof buf);
- target_read (¤t_target, TARGET_OBJECT_SPU, annex,
- buf, 0, sizeof buf);
-
- return strtoulst (buf, NULL, 16);
-}
-
static int
spu_address_class_type_flags (int byte_size, int dwarf2_addr_class)
{
struct type *type, const gdb_byte *buf)
{
int id = spu_gdbarch_id (gdbarch);
- ULONGEST lslr = spu_lslr (id);
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
ULONGEST addr
= extract_unsigned_integer (buf, TYPE_LENGTH (type), byte_order);
if (TYPE_ADDRESS_CLASS_1 (type))
return addr;
- return addr? SPUADDR (id, addr & lslr) : 0;
+ return addr? SPUADDR (id, addr) : 0;
}
static CORE_ADDR
struct type *type, const gdb_byte *buf)
{
int id = spu_gdbarch_id (gdbarch);
- ULONGEST lslr = spu_lslr (id);
ULONGEST addr = unpack_long (type, buf);
- return SPUADDR (id, addr & lslr);
+ return SPUADDR (id, addr);
}
int found_sp = 0;
int found_fp = 0;
int found_lr = 0;
+ int found_bc = 0;
int reg_immed[SPU_NUM_GPRS];
gdb_byte buf[16];
CORE_ADDR prolog_pc = start_pc;
- The first instruction to set up the stack pointer.
- The first instruction to set up the frame pointer.
- The first instruction to save the link register.
+ - The first instruction to save the backchain.
- We return the instruction after the latest of these three,
+ We return the instruction after the latest of these four,
or the incoming PC if none is found. The first instruction
to set up the stack pointer also defines the frame size.
found_lr = 1;
prolog_pc = pc + 4;
}
+
+ if (ra == SPU_RAW_SP_REGNUM
+ && (found_sp? immed == 0 : rt == SPU_RAW_SP_REGNUM)
+ && !found_bc)
+ {
+ found_bc = 1;
+ prolog_pc = pc + 4;
+ }
}
/* _start uses SELB to set up the stack pointer. */
}
else
{
- /* ??? We don't really know ... */
+ /* ??? We don't really know ... */
*reg = SPU_SP_REGNUM;
*offset = 0;
}
{
CORE_ADDR reg;
LONGEST backchain;
+ ULONGEST lslr;
int status;
+ /* Get local store limit. */
+ lslr = get_frame_register_unsigned (this_frame, SPU_LSLR_REGNUM);
+ if (!lslr)
+ lslr = (ULONGEST) -1;
+
/* Get the backchain. */
reg = get_frame_register_unsigned (this_frame, SPU_SP_REGNUM);
status = safe_read_memory_integer (SPUADDR (id, reg), 4, byte_order,
/* A zero backchain terminates the frame chain. Also, sanity
check against the local store size limit. */
- if (status && backchain > 0 && backchain < SPU_LS_SIZE)
+ if (status && backchain > 0 && backchain <= lslr)
{
/* Assume the link register is saved into its slot. */
- if (backchain + 16 < SPU_LS_SIZE)
- info->saved_regs[SPU_LR_REGNUM].addr = SPUADDR (id, backchain + 16);
+ if (backchain + 16 <= lslr)
+ info->saved_regs[SPU_LR_REGNUM].addr = SPUADDR (id,
+ backchain + 16);
/* Frame bases. */
info->frame_base = SPUADDR (id, backchain);
break;
case RETURN_VALUE_STRUCT_CONVENTION:
- error ("Cannot set function return value.");
+ error (_("Cannot set function return value."));
break;
}
}
break;
case RETURN_VALUE_STRUCT_CONVENTION:
- error ("Function return value unknown.");
+ error (_("Function return value unknown."));
break;
}
}
/* Breakpoints. */
static const gdb_byte *
-spu_breakpoint_from_pc (struct gdbarch *gdbarch, CORE_ADDR * pcptr, int *lenptr)
+spu_breakpoint_from_pc (struct gdbarch *gdbarch,
+ CORE_ADDR * pcptr, int *lenptr)
{
static const gdb_byte breakpoint[] = { 0x00, 0x00, 0x3f, 0xff };
return breakpoint;
}
+static int
+spu_memory_remove_breakpoint (struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt)
+{
+ /* We work around a problem in combined Cell/B.E. debugging here. Consider
+ that in a combined application, we have some breakpoints inserted in SPU
+ code, and now the application forks (on the PPU side). GDB common code
+ will assume that the fork system call copied all breakpoints into the new
+ process' address space, and that all those copies now need to be removed
+ (see breakpoint.c:detach_breakpoints).
+
+ While this is certainly true for PPU side breakpoints, it is not true
+ for SPU side breakpoints. fork will clone the SPU context file
+ descriptors, so that all the existing SPU contexts are in accessible
+ in the new process. However, the contents of the SPU contexts themselves
+ are *not* cloned. Therefore the effect of detach_breakpoints is to
+ remove SPU breakpoints from the *original* SPU context's local store
+ -- this is not the correct behaviour.
+
+ The workaround is to check whether the PID we are asked to remove this
+ breakpoint from (i.e. ptid_get_pid (inferior_ptid)) is different from the
+ PID of the current inferior (i.e. current_inferior ()->pid). This is only
+ true in the context of detach_breakpoints. If so, we simply do nothing.
+ [ Note that for the fork child process, it does not matter if breakpoints
+ remain inserted, because those SPU contexts are not runnable anyway --
+ the Linux kernel allows only the original process to invoke spu_run. */
+
+ if (ptid_get_pid (inferior_ptid) != current_inferior ()->pid)
+ return 0;
+
+ return default_memory_remove_breakpoint (gdbarch, bp_tgt);
+}
+
/* Software single-stepping support. */
unsigned int insn;
int offset, reg;
gdb_byte buf[4];
+ ULONGEST lslr;
pc = get_frame_pc (frame);
return 1;
insn = extract_unsigned_integer (buf, 4, byte_order);
+ /* Get local store limit. */
+ lslr = get_frame_register_unsigned (frame, SPU_LSLR_REGNUM);
+ if (!lslr)
+ lslr = (ULONGEST) -1;
+
/* Next sequential instruction is at PC + 4, except if the current
instruction is a PPE-assisted call, in which case it is at PC + 8.
Wrap around LS limit to be on the safe side. */
if ((insn & 0xffffff00) == 0x00002100)
- next_pc = (SPUADDR_ADDR (pc) + 8) & (SPU_LS_SIZE - 1);
+ next_pc = (SPUADDR_ADDR (pc) + 8) & lslr;
else
- next_pc = (SPUADDR_ADDR (pc) + 4) & (SPU_LS_SIZE - 1);
+ next_pc = (SPUADDR_ADDR (pc) + 4) & lslr;
insert_single_step_breakpoint (gdbarch,
aspace, SPUADDR (SPUADDR_SPU (pc), next_pc));
target += extract_unsigned_integer (buf, 4, byte_order) & -4;
}
- target = target & (SPU_LS_SIZE - 1);
+ target = target & lslr;
if (target != next_pc)
insert_single_step_breakpoint (gdbarch, aspace,
SPUADDR (SPUADDR_SPU (pc), target));
static int
gdb_print_insn_spu (bfd_vma memaddr, struct disassemble_info *info)
{
- /* The opcodes disassembler does 18-bit address arithmetic. Make sure the
- SPU ID encoded in the high bits is added back when we call print_address. */
+ /* The opcodes disassembler does 18-bit address arithmetic. Make
+ sure the SPU ID encoded in the high bits is added back when we
+ call print_address. */
struct disassemble_info spu_info = *info;
struct spu_dis_asm_data data;
data.gdbarch = info->application_data;
_ovly_table should never change.
- Both tables are aligned to a 16-byte boundary, the symbols _ovly_table
- and _ovly_buf_table are of type STT_OBJECT and their size set to the size
- of the respective array. buf in _ovly_table is an index into _ovly_buf_table.
+ Both tables are aligned to a 16-byte boundary, the symbols
+ _ovly_table and _ovly_buf_table are of type STT_OBJECT and their
+ size set to the size of the respective array. buf in _ovly_table is
+ an index into _ovly_buf_table.
- mapped is an index into _ovly_table. Both the mapped and buf indices start
+ mapped is an index into _ovly_table. Both the mapped and buf indices start
from one to reference the first entry in their respective tables. */
/* Using the per-objfile private data mechanism, we store for each
if (!ovly_table_msym)
return NULL;
- ovly_buf_table_msym = lookup_minimal_symbol ("_ovly_buf_table", NULL, objfile);
+ ovly_buf_table_msym = lookup_minimal_symbol ("_ovly_buf_table",
+ NULL, objfile);
if (!ovly_buf_table_msym)
return NULL;
/* Whenever a new objfile is loaded, read the target's _ovly_table.
If there is one, go through all sections and make sure for non-
overlay sections LMA equals VMA, while for overlay sections LMA
- is larger than local store size. */
+ is larger than SPU_OVERLAY_LMA. */
static void
spu_overlay_new_objfile (struct objfile *objfile)
{
if (ovly_table[ndx].mapped_ptr == 0)
bfd_section_lma (obfd, bsect) = bfd_section_vma (obfd, bsect);
else
- bfd_section_lma (obfd, bsect) = bsect->filepos + SPU_LS_SIZE;
+ bfd_section_lma (obfd, bsect) = SPU_OVERLAY_LMA + bsect->filepos;
}
}
struct symbol *sym;
struct symtab_and_line sal;
- sym = lookup_block_symbol (block, "main", NULL, VAR_DOMAIN);
+ sym = lookup_block_symbol (block, "main", VAR_DOMAIN);
if (sym)
{
fixup_symbol_section (sym, objfile);
/* Use a numerical address for the set_breakpoint command to avoid having
the breakpoint re-set incorrectly. */
xsnprintf (buf, sizeof buf, "*%s", core_addr_to_string (pc));
- set_breakpoint (get_objfile_arch (objfile),
- buf, NULL /* condition */,
- 0 /* hardwareflag */, 1 /* tempflag */,
- -1 /* thread */, 0 /* ignore_count */,
- 0 /* pending */, 1 /* enabled */);
+ create_breakpoint (get_objfile_arch (objfile), buf /* arg */,
+ NULL /* cond_string */, -1 /* thread */,
+ 0 /* parse_condition_and_thread */, 1 /* tempflag */,
+ bp_breakpoint /* type_wanted */,
+ 0 /* ignore_count */,
+ AUTO_BOOLEAN_FALSE /* pending_break_support */,
+ NULL /* ops */, 0 /* from_tty */, 1 /* enabled */,
+ 0 /* internal */);
}
static void
info_spu_command (char *args, int from_tty)
{
- printf_unfiltered (_("\"info spu\" must be followed by the name of an SPU facility.\n"));
+ printf_unfiltered (_("\"info spu\" must be followed by "
+ "the name of an SPU facility.\n"));
help_list (infospucmdlist, "info spu ", -1, gdb_stdout);
}
/* Breakpoints. */
set_gdbarch_decr_pc_after_break (gdbarch, 4);
set_gdbarch_breakpoint_from_pc (gdbarch, spu_breakpoint_from_pc);
+ set_gdbarch_memory_remove_breakpoint (gdbarch, spu_memory_remove_breakpoint);
set_gdbarch_cannot_step_breakpoint (gdbarch, 1);
set_gdbarch_software_single_step (gdbarch, spu_software_single_step);
set_gdbarch_get_longjmp_target (gdbarch, spu_get_longjmp_target);