/* Generic symbol file reading for the GNU debugger, GDB.
- Copyright 1990, 1991, 1992 Free Software Foundation, Inc.
+ Copyright 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
Contributed by Cygnus Support, using pieces from other GDB modules.
This file is part of GDB.
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-#include <stdio.h>
#include "defs.h"
#include "symtab.h"
#include "gdbtypes.h"
#include "target.h"
#include "value.h"
#include "symfile.h"
+#include "objfiles.h"
#include "gdbcmd.h"
#include "breakpoint.h"
-#include "state.h"
+#include "language.h"
+#include "complaints.h"
+#include "demangle.h"
+#include "inferior.h" /* for write_pc */
#include <obstack.h>
#include <assert.h>
#include <fcntl.h>
#include <string.h>
#include <sys/stat.h>
+#include <ctype.h>
+
+#ifndef O_BINARY
+#define O_BINARY 0
+#endif
/* Global variables owned by this file */
-CORE_ADDR entry_point; /* Where execution starts in symfile */
-struct sym_fns *symtab_fns = NULL; /* List of all available sym_fns. */
+int readnow_symbol_files; /* Read full symbols immediately */
+
+struct complaint oldsyms_complaint = {
+ "Replacing old symbols for `%s'", 0, 0
+};
+
+struct complaint empty_symtab_complaint = {
+ "Empty symbol table found for `%s'", 0, 0
+};
/* External variables and functions referenced. */
extern int info_verbose;
-extern CORE_ADDR startup_file_start; /* From blockframe.c */
-extern CORE_ADDR startup_file_end; /* From blockframe.c */
-
/* Functions this file defines */
+static void
+set_initial_language PARAMS ((void));
+
static void
load_command PARAMS ((char *, int));
static void
add_symbol_file_command PARAMS ((char *, int));
-static struct objfile *
-symbol_file_add_digested PARAMS ((sfd *, int));
-
static void
cashier_psymtab PARAMS ((struct partial_symtab *));
static int
compare_symbols PARAMS ((const void *, const void *));
-static struct objfile *
-symfile_open PARAMS ((char *, int));
-
-static struct sym_fns *
-symfile_init PARAMS ((struct objfile *));
+static bfd *
+symfile_bfd_open PARAMS ((char *));
static void
-clear_symtab_users_once PARAMS ((void));
-
-/* Saves the sym_fns of the current symbol table, so we can call
- the right XXX_new_init function when we free it. FIXME. This
- should be extended to calling the new_init function for each
- existing symtab or psymtab, since the main symbol file and
- subsequent added symbol files can have different types. */
-
-static struct sym_fns *symfile_fns;
-
-/* When we need to allocate a new type, we need to know which type_obstack
- to allocate the type on, since there is one for each objfile. The places
- where types are allocated are deeply buried in function call hierarchies
- which know nothing about objfiles, so rather than trying to pass a
- particular objfile down to them, we just do an end run around them and
- set current_objfile to be whatever objfile we expect to be using at the
- time types are being allocated. For instance, when we start reading
- symbols for a particular objfile, we set current_objfile to point to that
- objfile, and when we are done, we set it back to NULL, to ensure that we
- never put a type someplace other than where we are expecting to put it.
- FIXME: Maybe we should review the entire type handling system and
- see if there is a better way to avoid this problem. */
-
-struct objfile *current_objfile = NULL;
+find_sym_fns PARAMS ((struct objfile *));
-/* The object file that the main symbol table was loaded from (e.g. the
- argument to the "symbol-file" or "file" command). */
+/* List of all available sym_fns. On gdb startup, each object file reader
+ calls add_symtab_fns() to register information on each format it is
+ prepared to read. */
-struct objfile *symfile_objfile = NULL;
+static struct sym_fns *symtab_fns = NULL;
/* Structures with which to manage partial symbol allocation. */
int symbol_reloading = 0;
#endif
-/* Structure to manage complaints about symbol file contents. */
-
-struct complaint complaint_root[1] = {
- {(char *) 0, 0, complaint_root},
-};
-
-/* Some actual complaints. */
-
-struct complaint oldsyms_complaint = {
- "Replacing old symbols for `%s'", 0, 0 };
-
-struct complaint empty_symtab_complaint = {
- "Empty symbol table found for `%s'", 0, 0 };
-
\f
-/* In the following sort, we always make sure that
- register debug symbol declarations always come before regular
- debug symbol declarations (as might happen when parameters are
- then put into registers by the compiler).
-
- Since this function is called from within qsort, in an ANSI environment
+/* Since this function is called from within qsort, in an ANSI environment
it must conform to the prototype for qsort, which specifies that the
comparison function takes two "void *" pointers. */
const PTR s2p;
{
register struct symbol **s1, **s2;
- register int namediff;
s1 = (struct symbol **) s1p;
s2 = (struct symbol **) s2p;
- /* Compare the initial characters. */
- namediff = SYMBOL_NAME (*s1)[0] - SYMBOL_NAME (*s2)[0];
- if (namediff != 0) return namediff;
-
- /* If they match, compare the rest of the names. */
- namediff = strcmp (SYMBOL_NAME (*s1), SYMBOL_NAME (*s2));
- if (namediff != 0) return namediff;
-
- /* For symbols of the same name, registers should come first. */
- return ((SYMBOL_CLASS (*s2) == LOC_REGISTER)
- - (SYMBOL_CLASS (*s1) == LOC_REGISTER));
+ return (STRCMP (SYMBOL_NAME (*s1), SYMBOL_NAME (*s2)));
}
/*
}
else
{
- return (strcmp (st1 + 2, st2 + 2));
+ return (STRCMP (st1 + 2, st2 + 2));
}
}
}
}
-void
-sort_all_symtab_syms ()
-{
- register struct symtab *s;
- register struct objfile *objfile;
-
- for (objfile = object_files; objfile != NULL; objfile = objfile -> next)
- {
- for (s = objfile -> symtabs; s != NULL; s = s -> next)
- {
- sort_symtab_syms (s);
- }
- }
-}
-
/* Make a copy of the string at PTR with SIZE characters in the symbol obstack
(and add a null character at the end in the copy).
Returns the address of the copy. */
struct obstack *obstackp;
{
register char *p = (char *) obstack_alloc (obstackp, size + 1);
- /* Open-coded bcopy--saves function call time.
+ /* Open-coded memcpy--saves function call time.
These strings are usually short. */
{
register char *p1 = ptr;
return pst->symtab;
}
+/* Initialize entry point information for this objfile. */
+
+void
+init_entry_point_info (objfile)
+ struct objfile *objfile;
+{
+ /* Save startup file's range of PC addresses to help blockframe.c
+ decide where the bottom of the stack is. */
+
+ if (bfd_get_file_flags (objfile -> obfd) & EXEC_P)
+ {
+ /* Executable file -- record its entry point so we'll recognize
+ the startup file because it contains the entry point. */
+ objfile -> ei.entry_point = bfd_get_start_address (objfile -> obfd);
+ }
+ else
+ {
+ /* Examination of non-executable.o files. Short-circuit this stuff. */
+ /* ~0 will not be in any file, we hope. */
+ objfile -> ei.entry_point = ~0;
+ /* set the startup file to be an empty range. */
+ objfile -> ei.entry_file_lowpc = 0;
+ objfile -> ei.entry_file_highpc = 0;
+ }
+}
+
+/* Get current entry point address. */
+
+CORE_ADDR
+entry_point_address()
+{
+ return symfile_objfile ? symfile_objfile->ei.entry_point : 0;
+}
+
+/* Remember the lowest-addressed loadable section we've seen.
+ This function is called via bfd_map_over_sections. */
+
+#if 0 /* Not used yet */
+static void
+find_lowest_section (abfd, sect, obj)
+ bfd *abfd;
+ asection *sect;
+ PTR obj;
+{
+ asection **lowest = (asection **)obj;
+
+ if (0 == (bfd_get_section_flags (abfd, sect) & SEC_LOAD))
+ return;
+ if (!*lowest)
+ *lowest = sect; /* First loadable section */
+ else if (bfd_section_vma (abfd, *lowest) >= bfd_section_vma (abfd, sect))
+ *lowest = sect; /* A lower loadable section */
+}
+#endif
+
/* Process a symbol file, as either the main file or as a dynamically
loaded file.
int mainline;
int verbo;
{
- asection *text_sect;
- struct sym_fns *sf;
- bfd *sym_bfd = objfile->obfd;
+ struct section_offsets *section_offsets;
+ asection *lowest_sect;
+ struct cleanup *old_chain;
- /* There is a distinction between having no symbol table
- (we refuse to read the file, leaving the old set of symbols around)
- and having no debugging symbols in your symbol table (we read
- the file and end up with a mostly empty symbol table). */
+ init_entry_point_info (objfile);
+ find_sym_fns (objfile);
- if (!(bfd_get_file_flags (sym_bfd) & HAS_SYMS))
- return;
+ /* Make sure that partially constructed symbol tables will be cleaned up
+ if an error occurs during symbol reading. */
+ old_chain = make_cleanup (free_objfile, objfile);
- /* Save startup file's range of PC addresses to help blockframe.c
- decide where the bottom of the stack is. */
- if (bfd_get_file_flags (sym_bfd) & EXEC_P)
+ if (mainline)
{
- /* Executable file -- record its entry point so we'll recognize
- the startup file because it contains the entry point. */
- entry_point = bfd_get_start_address (sym_bfd);
+ /* We will modify the main symbol table, make sure that all its users
+ will be cleaned up if an error occurs during symbol reading. */
+ make_cleanup (clear_symtab_users, 0);
+
+ /* Since no error yet, throw away the old symbol table. */
+
+ if (symfile_objfile != NULL)
+ {
+ free_objfile (symfile_objfile);
+ symfile_objfile = NULL;
+ }
+
+ /* Currently we keep symbols from the add-symbol-file command.
+ If the user wants to get rid of them, they should do "symbol-file"
+ without arguments first. Not sure this is the best behavior
+ (PR 2207). */
+
+ (*objfile -> sf -> sym_new_init) (objfile);
+ }
+
+ /* Convert addr into an offset rather than an absolute address.
+ We find the lowest address of a loaded segment in the objfile,
+ and assume that <addr> is where that got loaded. Due to historical
+ precedent, we warn if that doesn't happen to be the ".text"
+ segment. */
+
+ if (mainline)
+ {
+ addr = 0; /* No offset from objfile addresses. */
}
else
{
- /* Examination of non-executable.o files. Short-circuit this stuff. */
- /* ~0 will not be in any file, we hope. */
- entry_point = ~0;
- /* set the startup file to be an empty range. */
- startup_file_start = 0;
- startup_file_end = 0;
+ lowest_sect = bfd_get_section_by_name (objfile->obfd, ".text");
+#if 0
+ lowest_sect = 0;
+ bfd_map_over_sections (objfile->obfd, find_lowest_section,
+ (PTR) &lowest_sect);
+#endif
+
+ if (lowest_sect == 0)
+ warning ("no loadable sections found in added symbol-file %s",
+ objfile->name);
+ else if (0 == bfd_get_section_name (objfile->obfd, lowest_sect)
+ || !STREQ (".text",
+ bfd_get_section_name (objfile->obfd, lowest_sect)))
+ warning ("Lowest section in %s is %s at 0x%lx",
+ objfile->name,
+ bfd_section_name (objfile->obfd, lowest_sect),
+ (unsigned long) bfd_section_vma (objfile->obfd, lowest_sect));
+
+ if (lowest_sect)
+ addr -= bfd_section_vma (objfile->obfd, lowest_sect);
}
- sf = symfile_init (objfile);
+ /* Initialize symbol reading routines for this objfile, allow complaints to
+ appear for this new file, and record how verbose to be, then do the
+ initial symbol reading for this file. */
- if (mainline)
- {
- /* Since no error yet, throw away the old symbol table. */
+ (*objfile -> sf -> sym_init) (objfile);
+ clear_complaints (1, verbo);
- if (symfile_objfile)
- free_objfile (symfile_objfile);
- symfile_objfile = NULL;
+ section_offsets = (*objfile -> sf -> sym_offsets) (objfile, addr);
+ objfile->section_offsets = section_offsets;
- (*sf->sym_new_init) ();
+#ifndef IBM6000_TARGET
+ /* This is a SVR4/SunOS specific hack, I think. In any event, it
+ screws RS/6000. sym_offsets should be doing this sort of thing,
+ because it knows the mapping between bfd sections and
+ section_offsets. */
+ /* This is a hack. As far as I can tell, section offsets are not
+ target dependent. They are all set to addr with a couple of
+ exceptions. The exceptions are sysvr4 shared libraries, whose
+ offsets are kept in solib structures anyway and rs6000 xcoff
+ which handles shared libraries in a completely unique way.
- /* For mainline, caller didn't know the specified address of the
- text section. We fix that here. */
- text_sect = bfd_get_section_by_name (sym_bfd, ".text");
- addr = bfd_section_vma (sym_bfd, text_sect);
- }
+ Section offsets are built similarly, except that they are built
+ by adding addr in all cases because there is no clear mapping
+ from section_offsets into actual sections. Note that solib.c
+ has a different algorythm for finding section offsets.
- /* Allow complaints to appear for this new file, and record how
- verbose to be. */
+ These should probably all be collapsed into some target
+ independent form of shared library support. FIXME. */
- clear_complaints(1, verbo);
+ if (addr)
+ {
+ struct obj_section *s;
- (*sf->sym_read) (sf, addr, mainline);
+ for (s = objfile->sections; s < objfile->sections_end; ++s)
+ {
+ s->addr -= s->offset;
+ s->addr += addr;
+ s->endaddr -= s->offset;
+ s->endaddr += addr;
+ s->offset += addr;
+ }
+ }
+#endif /* not IBM6000_TARGET */
+
+ (*objfile -> sf -> sym_read) (objfile, section_offsets, mainline);
- /* Don't allow char * to have a typename (else would get caddr_t.) */
- /* Ditto void *. FIXME should do this for all the builtin types. */
+ /* Don't allow char * to have a typename (else would get caddr_t).
+ Ditto void *. FIXME: Check whether this is now done by all the
+ symbol readers themselves (many of them now do), and if so remove
+ it from here. */
TYPE_NAME (lookup_pointer_type (builtin_type_char)) = 0;
TYPE_NAME (lookup_pointer_type (builtin_type_void)) = 0;
- if (mainline)
- {
- /* OK, make it the "real" symbol file. */
- symfile_objfile = objfile;
- symfile_fns = sf;
- }
+ /* Mark the objfile has having had initial symbol read attempted. Note
+ that this does not mean we found any symbols... */
- /* If we have wiped out any old symbol tables, clean up. */
- clear_symtab_users_once ();
+ objfile -> flags |= OBJF_SYMS;
- /* We're done reading the symbol file; finish off complaints. */
- clear_complaints(0, verbo);
+ /* Discard cleanups as symbol reading was successful. */
- /* Setup the breakpoint(s) for trapping longjmp(), as it may have been
- defined by this new file. */
- create_longjmp_breakpoint();
+ discard_cleanups (old_chain);
}
-/* Reload a predigested symbol file from a dumped state file.
-
- FIXME: For now, we load only the first dumped objfile that we
- find, for two reasons. (1) Our custom malloc and mmap'd sbrk
- implementation only supports one mmap'd objfile at a time, so we
- can only create state files with one dumped objfile in them and
- would have no way to deal with multiple dumped objfiles when reading
- the state file back in even if we could create them. (2) We currently
- have no way to select a specific objfile to load from a state file
- containing a dump of more than one objfile, so we just select the
- first one we encounter. */
-
-static struct objfile *
-symbol_file_add_digested (asfd, from_tty)
- sfd *asfd;
- int from_tty;
+/* Perform required actions after either reading in the initial
+ symbols for a new objfile, or mapping in the symbols from a reusable
+ objfile. */
+
+void
+new_symfile_objfile (objfile, mainline, verbo)
+ struct objfile *objfile;
+ int mainline;
+ int verbo;
{
- struct objfile *objfile;
- bfd *sym_bfd;
-
- /* First locate and map in the dumped symbol information */
- objfile = objfile_from_statefile (asfd);
-
- /* Push this file onto the head of the linked list of other such files. */
-
- objfile -> next = object_files;
- object_files = objfile;
+ /* If this is the main symbol file we have to clean up all users of the
+ old main symbol file. Otherwise it is sufficient to fixup all the
+ breakpoints that may have been redefined by this symbol file. */
+ if (mainline)
+ {
+ /* OK, make it the "real" symbol file. */
+ symfile_objfile = objfile;
-#if 0 /* FIXME: Things to deal with... */
- objfile -> obfd = abfd;
- objfile -> mtime = bfd_get_mtime (abfd);
- obstack_full_begin (&objfile -> psymbol_obstack, 0, 0, xmalloc, free);
- obstack_full_begin (&objfile -> symbol_obstack, 0, 0, xmalloc, free);
- obstack_full_begin (&objfile -> type_obstack, 0, 0, xmalloc, free);
-#endif
+ clear_symtab_users ();
+ }
+ else
+ {
+ breakpoint_re_set ();
+ }
+ /* We're done reading the symbol file; finish off complaints. */
+ clear_complaints (0, verbo);
}
/* Process a symbol file, as either the main file or as a dynamically
Upon failure, jumps back to command level (never returns). */
struct objfile *
-symbol_file_add (name, from_tty, addr, mainline, dumpable)
+symbol_file_add (name, from_tty, addr, mainline, mapped, readnow)
char *name;
int from_tty;
CORE_ADDR addr;
int mainline;
- int dumpable;
+ int mapped;
+ int readnow;
{
struct objfile *objfile;
- bfd *sym_bfd;
-
- objfile = symfile_open (name, dumpable);
- sym_bfd = objfile->obfd;
+ struct partial_symtab *psymtab;
+ bfd *abfd;
- /* There is a distinction between having no symbol table
- (we refuse to read the file, leaving the old set of symbols around)
- and having no debugging symbols in your symbol table (we read
- the file and end up with a mostly empty symbol table, but with lots
- of stuff in the minimal symbol table). */
+ /* Open a bfd for the file, and give user a chance to burp if we'd be
+ interactively wiping out any existing symbols. */
- if (!(bfd_get_file_flags (sym_bfd) & HAS_SYMS))
- {
- error ("%s has no symbol-table", name);
- }
+ abfd = symfile_bfd_open (name);
if ((have_full_symbols () || have_partial_symbols ())
&& mainline
&& from_tty
&& !query ("Load new symbol table from \"%s\"? ", name))
- error ("Not confirmed.");
+ error ("Not confirmed.");
- if (from_tty || info_verbose)
+ objfile = allocate_objfile (abfd, mapped);
+
+ /* If the objfile uses a mapped symbol file, and we have a psymtab for
+ it, then skip reading any symbols at this time. */
+
+ if ((objfile -> flags & OBJF_MAPPED) && (objfile -> flags & OBJF_SYMS))
{
- printf_filtered ("Reading symbols from %s...", name);
- wrap_here ("");
- fflush (stdout);
+ /* We mapped in an existing symbol table file that already has had
+ initial symbol reading performed, so we can skip that part. Notify
+ the user that instead of reading the symbols, they have been mapped.
+ */
+ if (from_tty || info_verbose)
+ {
+ printf_filtered ("Mapped symbols for %s...", name);
+ wrap_here ("");
+ gdb_flush (gdb_stdout);
+ }
+ init_entry_point_info (objfile);
+ find_sym_fns (objfile);
}
+ else
+ {
+ /* We either created a new mapped symbol table, mapped an existing
+ symbol table file which has not had initial symbol reading
+ performed, or need to read an unmapped symbol table. */
+ if (from_tty || info_verbose)
+ {
+ printf_filtered ("Reading symbols from %s...", name);
+ wrap_here ("");
+ gdb_flush (gdb_stdout);
+ }
+ syms_from_objfile (objfile, addr, mainline, from_tty);
+ }
- syms_from_objfile (objfile, addr, mainline, from_tty);
+ /* We now have at least a partial symbol table. Check to see if the
+ user requested that all symbols be read on initial access via either
+ the gdb startup command line or on a per symbol file basis. Expand
+ all partial symbol tables for this objfile if so. */
+
+ if (readnow || readnow_symbol_files)
+ {
+ if (from_tty || info_verbose)
+ {
+ printf_filtered ("expanding to full symbols...");
+ wrap_here ("");
+ gdb_flush (gdb_stdout);
+ }
+
+ for (psymtab = objfile -> psymtabs;
+ psymtab != NULL;
+ psymtab = psymtab -> next)
+ {
+ psymtab_to_symtab (psymtab);
+ }
+ }
if (from_tty || info_verbose)
{
printf_filtered ("done.\n");
- fflush (stdout);
+ gdb_flush (gdb_stdout);
}
+
+ new_symfile_objfile (objfile, mainline, from_tty);
+
+ /* Getting new symbols may change our opinion about what is
+ frameless. */
+
+ reinit_frame_cache ();
+
return (objfile);
}
int from_tty;
{
char **argv;
- char *name;
+ char *name = NULL;
struct cleanup *cleanups;
- struct objfile *objfile;
- struct partial_symtab *psymtab;
- sfd *sym_sfd;
- int dumpable = 0;
+ int mapped = 0;
int readnow = 0;
dont_repeat ();
if (args == NULL)
{
- if (symfile_objfile)
- {
- if ((have_full_symbols () || have_partial_symbols ())
- && from_tty
- && !query ("Discard symbol table from `%s'? ",
- symfile_objfile -> name))
- error ("Not confirmed.");
- free_objfile (symfile_objfile);
- }
+ if ((have_full_symbols () || have_partial_symbols ())
+ && from_tty
+ && !query ("Discard symbol table from `%s'? ",
+ symfile_objfile -> name))
+ error ("Not confirmed.");
+ free_all_objfiles ();
symfile_objfile = NULL;
- /* FIXME, this does not account for the main file and subsequent
- files (shared libs, dynloads, etc) having different formats.
- It only calls the cleanup routine for the main file's format. */
- if (symfile_fns)
+ if (from_tty)
{
- (*symfile_fns -> sym_new_init) ();
- free (symfile_fns);
- symfile_fns = 0;
+ printf_unfiltered ("No symbol file now.\n");
}
}
else
{
if ((argv = buildargv (args)) == NULL)
{
- fatal ("virtual memory exhausted.", 0);
+ nomem (0);
}
cleanups = make_cleanup (freeargv, (char *) argv);
-
- name = *argv;
- while (*++argv != NULL)
+ while (*argv != NULL)
{
- if (strcmp (*argv, "dumpable"))
+ if (STREQ (*argv, "-mapped"))
{
- dumpable = 1;
+ mapped = 1;
}
- else if (strcmp (*argv, "readnow"))
+ else if (STREQ (*argv, "-readnow"))
{
readnow = 1;
}
- }
-
- if (name != NULL)
- {
- if ((sym_sfd = sfd_fopen (name, "r")) != NULL)
+ else if (**argv == '-')
{
- (void) symbol_file_add_digested (sym_sfd, from_tty);
+ error ("unknown option `%s'", *argv);
}
else
{
- /* Getting new symbols may change our opinion about what is
- frameless. */
- reinit_frame_cache ();
- objfile = symbol_file_add (name, from_tty, (CORE_ADDR)0, 1,
- dumpable);
- if (readnow)
- {
- for (psymtab = objfile -> psymtabs;
- psymtab != NULL;
- psymtab = psymtab -> next)
- {
- (void) psymtab_to_symtab (psymtab);
- }
- }
+ name = *argv;
}
+ argv++;
+ }
+
+ if (name == NULL)
+ {
+ error ("no symbol file name was specified");
+ }
+ else
+ {
+ symbol_file_add (name, from_tty, (CORE_ADDR)0, 1, mapped, readnow);
+ set_initial_language ();
}
do_cleanups (cleanups);
}
}
-/* Open NAME and hand it off to BFD for preliminary analysis. Result
- is newly malloc'd struct objfile *, which includes a newly malloc'd`
- copy of NAME (tilde-expanded and made absolute).
+/* Set the initial language.
+
+ A better solution would be to record the language in the psymtab when reading
+ partial symbols, and then use it (if known) to set the language. This would
+ be a win for formats that encode the language in an easily discoverable place,
+ such as DWARF. For stabs, we can jump through hoops looking for specially
+ named symbols or try to intuit the language from the specific type of stabs
+ we find, but we can't do that until later when we read in full symbols.
+ FIXME. */
+
+static void
+set_initial_language ()
+{
+ struct partial_symtab *pst;
+ enum language lang = language_unknown;
+
+ pst = find_main_psymtab ();
+ if (pst != NULL)
+ {
+ if (pst -> filename != NULL)
+ {
+ lang = deduce_language_from_filename (pst -> filename);
+ }
+ if (lang == language_unknown)
+ {
+ /* Make C the default language */
+ lang = language_c;
+ }
+ set_language (lang);
+ expected_language = current_language; /* Don't warn the user */
+ }
+}
+
+/* Open file specified by NAME and hand it off to BFD for preliminary
+ analysis. Result is a newly initialized bfd *, which includes a newly
+ malloc'd` copy of NAME (tilde-expanded and made absolute).
In case of trouble, error() is called. */
-static struct objfile *
-symfile_open (name, dumpable)
+static bfd *
+symfile_bfd_open (name)
char *name;
- int dumpable;
{
bfd *sym_bfd;
int desc;
char *absolute_name;
- struct objfile *objfile;
name = tilde_expand (name); /* Returns 1st new malloc'd copy */
/* Look down path for it, allocate 2nd new malloc'd copy. */
- desc = openp (getenv ("PATH"), 1, name, O_RDONLY, 0, &absolute_name);
- if (desc < 0) {
- make_cleanup (free, name);
- perror_with_name (name);
- }
+ desc = openp (getenv ("PATH"), 1, name, O_RDONLY | O_BINARY, 0, &absolute_name);
+ if (desc < 0)
+ {
+ make_cleanup (free, name);
+ perror_with_name (name);
+ }
free (name); /* Free 1st new malloc'd copy */
name = absolute_name; /* Keep 2nd malloc'd copy in bfd */
+ /* It'll be freed in free_objfile(). */
- sym_bfd = bfd_fdopenr (name, NULL, desc);
+ sym_bfd = bfd_fdopenr (name, gnutarget, desc);
if (!sym_bfd)
{
close (desc);
make_cleanup (free, name);
- error ("Could not open `%s' to read symbols: %s",
- name, bfd_errmsg (bfd_error));
+ error ("\"%s\": can't open to read symbols: %s.", name,
+ bfd_errmsg (bfd_error));
}
+ sym_bfd->cacheable = true;
- if (!bfd_check_format (sym_bfd, bfd_object)) {
- bfd_close (sym_bfd); /* This also closes desc */
- make_cleanup (free, name);
- error ("\"%s\": can't read symbols: %s.",
- name, bfd_errmsg (bfd_error));
- }
+ if (!bfd_check_format (sym_bfd, bfd_object))
+ {
+ bfd_close (sym_bfd); /* This also closes desc */
+ make_cleanup (free, name);
+ error ("\"%s\": can't read symbols: %s.", name,
+ bfd_errmsg (bfd_error));
+ }
- objfile = allocate_objfile (sym_bfd, name, dumpable);
- return objfile;
+ return (sym_bfd);
}
-/* Link a new symtab_fns into the global symtab_fns list.
- Called by various _initialize routines. */
+/* Link a new symtab_fns into the global symtab_fns list. Called on gdb
+ startup by the _initialize routine in each object file format reader,
+ to register information about each format the the reader is prepared
+ to handle. */
void
add_symtab_fns (sf)
/* Initialize to read symbols from the symbol file sym_bfd. It either
- returns or calls error(). The result is a malloc'd struct sym_fns
- that contains cached information about the symbol file. */
+ returns or calls error(). The result is an initialized struct sym_fns
+ in the objfile structure, that contains cached information about the
+ symbol file. */
-static struct sym_fns *
-symfile_init (objfile)
+static void
+find_sym_fns (objfile)
struct objfile *objfile;
{
- struct sym_fns *sf, *sf2;
- bfd *sym_bfd = objfile->obfd;
+ struct sym_fns *sf;
+ enum bfd_flavour our_flavour = bfd_get_flavour (objfile -> obfd);
- for (sf = symtab_fns; sf != NULL; sf = sf->next)
+ /* Special kludge for RS/6000. See xcoffread.c. */
+ if (STREQ (bfd_get_target (objfile -> obfd), "aixcoff-rs6000"))
+ our_flavour = (enum bfd_flavour)-1;
+
+ for (sf = symtab_fns; sf != NULL; sf = sf -> next)
{
- if (!strncmp (bfd_get_target (sym_bfd), sf->sym_name, sf->sym_namelen))
+ if (our_flavour == sf -> sym_flavour)
{
- sf2 = (struct sym_fns *)xmalloc (sizeof (*sf2));
- /* FIXME, who frees this? */
- *sf2 = *sf;
- sf2->objfile = objfile;
- sf2->sym_bfd = sym_bfd;
- sf2->sym_private = 0; /* Not alloc'd yet */
- (*sf2->sym_init) (sf2);
- return sf2;
+ objfile -> sf = sf;
+ return;
}
}
error ("I'm sorry, Dave, I can't do that. Symbol format `%s' unknown.",
- bfd_get_target (sym_bfd));
- return 0; /* Appease lint. */
+ bfd_get_target (objfile -> obfd));
}
\f
/* This function runs the load command of our current target. */
target_load (arg, from_tty);
}
+/* This version of "load" should be usable for any target. Currently
+ it is just used for remote targets, not inftarg.c or core files,
+ on the theory that only in that case is it useful.
+
+ Avoiding xmodem and the like seems like a win (a) because we don't have
+ to worry about finding it, and (b) On VMS, fork() is very slow and so
+ we don't want to run a subprocess. On the other hand, I'm not sure how
+ performance compares. */
+void
+generic_load (filename, from_tty)
+ char *filename;
+ int from_tty;
+{
+ struct cleanup *old_cleanups;
+ asection *s;
+ bfd *loadfile_bfd = bfd_openr (filename, gnutarget);
+ if (loadfile_bfd == NULL)
+ {
+ perror_with_name (filename);
+ return;
+ }
+ old_cleanups = make_cleanup (bfd_close, loadfile_bfd);
+
+ if (!bfd_check_format (loadfile_bfd, bfd_object))
+ {
+ error ("\"%s\" is not an object file: %s", filename,
+ bfd_errmsg (bfd_error));
+ }
+
+ for (s = loadfile_bfd->sections; s; s = s->next)
+ {
+ if (s->flags & SEC_LOAD)
+ {
+ bfd_size_type size;
+
+ size = bfd_get_section_size_before_reloc (s);
+ if (size > 0)
+ {
+ char *buffer;
+ struct cleanup *old_chain;
+ bfd_vma vma;
+
+ buffer = xmalloc (size);
+ old_chain = make_cleanup (free, buffer);
+
+ vma = bfd_get_section_vma (loadfile_bfd, s);
+
+ /* Is this really necessary? I guess it gives the user something
+ to look at during a long download. */
+ printf_filtered ("Loading section %s, size 0x%lx vma 0x%lx\n",
+ bfd_get_section_name (loadfile_bfd, s),
+ (unsigned long) size, (unsigned long) vma);
+
+ bfd_get_section_contents (loadfile_bfd, s, buffer, 0, size);
+
+ target_write_memory (vma, buffer, size);
+
+ do_cleanups (old_chain);
+ }
+ }
+ }
+
+ /* We were doing this in remote-mips.c, I suspect it is right
+ for other targets too. */
+ write_pc (loadfile_bfd->start_address);
+
+ /* FIXME: are we supposed to call symbol_file_add or not? According to
+ a comment from remote-mips.c (where a call to symbol_file_add was
+ commented out), making the call confuses GDB if more than one file is
+ loaded in. remote-nindy.c had no call to symbol_file_add, but remote-vx.c
+ does. */
+
+ do_cleanups (old_cleanups);
+}
+
/* This function allows the addition of incrementally linked object files.
It does not modify any state in the target, only in the debugger. */
/* ARGSUSED */
static void
-add_symbol_file_command (arg_string, from_tty)
- char *arg_string;
+add_symbol_file_command (args, from_tty)
+ char *args;
int from_tty;
{
- char *name;
+ char *name = NULL;
CORE_ADDR text_addr;
+ char *arg;
+ int readnow = 0;
+ int mapped = 0;
- /* Getting new symbols may change our opinion about what is
- frameless. */
- reinit_frame_cache ();
+ dont_repeat ();
- if (arg_string == 0)
- error ("add-symbol-file takes a file name and an address");
+ if (args == NULL)
+ {
+ error ("add-symbol-file takes a file name and an address");
+ }
- arg_string = tilde_expand (arg_string);
- make_cleanup (free, arg_string);
+ /* Make a copy of the string that we can safely write into. */
- for( ; *arg_string == ' '; arg_string++ );
- name = arg_string;
- for( ; *arg_string && *arg_string != ' ' ; arg_string++ );
- *arg_string++ = (char) 0;
+ args = strdup (args);
+ make_cleanup (free, args);
- if (name[0] == 0)
- error ("add-symbol-file takes a file name and an address");
+ /* Pick off any -option args and the file name. */
- text_addr = parse_and_eval_address (arg_string);
+ while ((*args != '\000') && (name == NULL))
+ {
+ while (isspace (*args)) {args++;}
+ arg = args;
+ while ((*args != '\000') && !isspace (*args)) {args++;}
+ if (*args != '\000')
+ {
+ *args++ = '\000';
+ }
+ if (*arg != '-')
+ {
+ name = arg;
+ }
+ else if (STREQ (arg, "-mapped"))
+ {
+ mapped = 1;
+ }
+ else if (STREQ (arg, "-readnow"))
+ {
+ readnow = 1;
+ }
+ else
+ {
+ error ("unknown option `%s'", arg);
+ }
+ }
- dont_repeat ();
+ /* After picking off any options and the file name, args should be
+ left pointing at the remainder of the command line, which should
+ be the address expression to evaluate. */
+
+ if ((name == NULL) || (*args == '\000') )
+ {
+ error ("add-symbol-file takes a file name and an address");
+ }
+ name = tilde_expand (name);
+ make_cleanup (free, name);
+
+ text_addr = parse_and_eval_address (args);
if (!query ("add symbol table from file \"%s\" at text_addr = %s?\n",
- name, local_hex_string (text_addr)))
+ name, local_hex_string ((unsigned long)text_addr)))
error ("Not confirmed.");
- (void) symbol_file_add (name, 0, text_addr, 0, 0);
+ symbol_file_add (name, 0, text_addr, 0, mapped, readnow);
}
\f
/* Re-read symbols if a symbol-file has changed. */
struct objfile *objfile;
long new_modtime;
int reread_one = 0;
+ struct stat new_statbuf;
+ int res;
/* With the addition of shared libraries, this should be modified,
the load time should be saved in the partial symbol tables, since
This routine should then walk down each partial symbol table
and see if the symbol table that it originates from has been changed */
-the_big_top:
for (objfile = object_files; objfile; objfile = objfile->next) {
if (objfile->obfd) {
- new_modtime = bfd_get_mtime (objfile->obfd);
- if (new_modtime != objfile->mtime) {
- printf_filtered ("`%s' has changed; re-reading symbols.\n",
+#ifdef IBM6000_TARGET
+ /* If this object is from a shared library, then you should
+ stat on the library name, not member name. */
+
+ if (objfile->obfd->my_archive)
+ res = stat (objfile->obfd->my_archive->filename, &new_statbuf);
+ else
+#endif
+ res = stat (objfile->name, &new_statbuf);
+ if (res != 0) {
+ /* FIXME, should use print_sys_errmsg but it's not filtered. */
+ printf_filtered ("`%s' has disappeared; keeping its symbols.\n",
objfile->name);
- /* FIXME, this should use a different command...that would only
- affect this objfile's symbols, and would reset objfile->mtime.
- (objfile->mtime = new_modtime;)
- HOWEVER, that command isn't written yet -- so call symbol_file_
- command, and restart the scan from the top, because it munges
- the object_files list. */
- symbol_file_command (objfile->name, 0);
- reread_one = 1;
- goto the_big_top; /* Start over. */
+ continue;
}
+ new_modtime = new_statbuf.st_mtime;
+ if (new_modtime != objfile->mtime)
+ {
+ struct cleanup *old_cleanups;
+ struct section_offsets *offsets;
+ int num_offsets;
+ int section_offsets_size;
+
+ printf_filtered ("`%s' has changed; re-reading symbols.\n",
+ objfile->name);
+
+ /* There are various functions like symbol_file_add,
+ symfile_bfd_open, syms_from_objfile, etc., which might
+ appear to do what we want. But they have various other
+ effects which we *don't* want. So we just do stuff
+ ourselves. We don't worry about mapped files (for one thing,
+ any mapped file will be out of date). */
+
+ /* If we get an error, blow away this objfile (not sure if
+ that is the correct response for things like shared
+ libraries). */
+ old_cleanups = make_cleanup (free_objfile, objfile);
+ /* We need to do this whenever any symbols go away. */
+ make_cleanup (clear_symtab_users, 0);
+
+ /* Clean up any state BFD has sitting around. We don't need
+ to close the descriptor but BFD lacks a way of closing the
+ BFD without closing the descriptor. */
+ if (!bfd_close (objfile->obfd))
+ error ("Can't close BFD for %s.", objfile->name);
+ objfile->obfd = bfd_openr (objfile->name, gnutarget);
+ if (objfile->obfd == NULL)
+ error ("Can't open %s to read symbols.", objfile->name);
+ /* bfd_openr sets cacheable to true, which is what we want. */
+ if (!bfd_check_format (objfile->obfd, bfd_object))
+ error ("Can't read symbols from %s: %s.", objfile->name,
+ bfd_errmsg (bfd_error));
+
+ /* Save the offsets, we will nuke them with the rest of the
+ psymbol_obstack. */
+ num_offsets = objfile->num_sections;
+ section_offsets_size =
+ sizeof (struct section_offsets)
+ + sizeof (objfile->section_offsets->offsets) * num_offsets;
+ offsets = (struct section_offsets *) alloca (section_offsets_size);
+ memcpy (offsets, objfile->section_offsets, section_offsets_size);
+
+ /* Nuke all the state that we will re-read. Much of the following
+ code which sets things to NULL really is necessary to tell
+ other parts of GDB that there is nothing currently there. */
+
+ /* FIXME: Do we have to free a whole linked list, or is this
+ enough? */
+ if (objfile->global_psymbols.list)
+ mfree (objfile->md, objfile->global_psymbols.list);
+ objfile->global_psymbols.list = NULL;
+ objfile->global_psymbols.size = 0;
+ if (objfile->static_psymbols.list)
+ mfree (objfile->md, objfile->static_psymbols.list);
+ objfile->static_psymbols.list = NULL;
+ objfile->static_psymbols.size = 0;
+
+ /* Free the obstacks for non-reusable objfiles */
+ obstack_free (&objfile -> psymbol_obstack, 0);
+ obstack_free (&objfile -> symbol_obstack, 0);
+ obstack_free (&objfile -> type_obstack, 0);
+ objfile->sections = NULL;
+ objfile->symtabs = NULL;
+ objfile->psymtabs = NULL;
+ objfile->free_psymtabs = NULL;
+ objfile->msymbols = NULL;
+ objfile->minimal_symbol_count= 0;
+ objfile->fundamental_types = NULL;
+ if (objfile -> sf != NULL)
+ {
+ (*objfile -> sf -> sym_finish) (objfile);
+ }
+
+ /* We never make this a mapped file. */
+ objfile -> md = NULL;
+ /* obstack_specify_allocation also initializes the obstack so
+ it is empty. */
+ obstack_specify_allocation (&objfile -> psymbol_obstack, 0, 0,
+ xmalloc, free);
+ obstack_specify_allocation (&objfile -> symbol_obstack, 0, 0,
+ xmalloc, free);
+ obstack_specify_allocation (&objfile -> type_obstack, 0, 0,
+ xmalloc, free);
+ if (build_objfile_section_table (objfile))
+ {
+ error ("Can't find the file sections in `%s': %s",
+ objfile -> name, bfd_errmsg (bfd_error));
+ }
+
+ /* We use the same section offsets as from last time. I'm not
+ sure whether that is always correct for shared libraries. */
+ objfile->section_offsets = (struct section_offsets *)
+ obstack_alloc (&objfile -> psymbol_obstack, section_offsets_size);
+ memcpy (objfile->section_offsets, offsets, section_offsets_size);
+ objfile->num_sections = num_offsets;
+
+ /* What the hell is sym_new_init for, anyway? The concept of
+ distinguishing between the main file and additional files
+ in this way seems rather dubious. */
+ if (objfile == symfile_objfile)
+ (*objfile->sf->sym_new_init) (objfile);
+
+ (*objfile->sf->sym_init) (objfile);
+ clear_complaints (1, 1);
+ /* The "mainline" parameter is a hideous hack; I think leaving it
+ zero is OK since dbxread.c also does what it needs to do if
+ objfile->global_psymbols.size is 0. */
+ (*objfile->sf->sym_read) (objfile, objfile->section_offsets, 0);
+ objfile -> flags |= OBJF_SYMS;
+
+ /* We're done reading the symbol file; finish off complaints. */
+ clear_complaints (0, 1);
+
+ /* Getting new symbols may change our opinion about what is
+ frameless. */
+
+ reinit_frame_cache ();
+
+ /* Discard cleanups as symbol reading was successful. */
+ discard_cleanups (old_cleanups);
+
+ /* If the mtime has changed between the time we set new_modtime
+ and now, we *want* this to be out of date, so don't call stat
+ again now. */
+ objfile->mtime = new_modtime;
+ reread_one = 1;
+ }
}
}
if (reread_one)
- breakpoint_re_set ();
-}
-
-\f
-/* Functions to handle complaints during symbol reading. */
-
-/* How many complaints about a particular thing should be printed before
- we stop whining about it? Default is no whining at all, since so many
- systems have ill-constructed symbol files. */
-
-static unsigned stop_whining = 0;
-
-/* Should each complaint be self explanatory, or should we assume that
- a series of complaints is being produced?
- case 0: self explanatory message.
- case 1: First message of a series that must start off with explanation.
- case 2: Subsequent message, when user already knows we are reading
- symbols and we can just state our piece. */
-
-static int complaint_series = 0;
-
-/* Print a complaint about the input symbols, and link the complaint block
- into a chain for later handling. */
-
-void
-complain (complaint, val)
- struct complaint *complaint;
- char *val;
-{
- complaint->counter++;
- if (complaint->next == 0) {
- complaint->next = complaint_root->next;
- complaint_root->next = complaint;
- }
- if (complaint->counter > stop_whining)
- return;
- wrap_here ("");
-
- switch (complaint_series + (info_verbose << 1)) {
-
- /* Isolated messages, must be self-explanatory. */
- case 0:
- puts_filtered ("During symbol reading, ");
- wrap_here("");
- printf_filtered (complaint->message, val);
- puts_filtered (".\n");
- break;
-
- /* First of a series, without `set verbose'. */
- case 1:
- puts_filtered ("During symbol reading...");
- printf_filtered (complaint->message, val);
- puts_filtered ("...");
- wrap_here("");
- complaint_series++;
- break;
-
- /* Subsequent messages of a series, or messages under `set verbose'.
- (We'll already have produced a "Reading in symbols for XXX..." message
- and will clean up at the end with a newline.) */
- default:
- printf_filtered (complaint->message, val);
- puts_filtered ("...");
- wrap_here("");
- }
+ clear_symtab_users ();
}
-/* Clear out all complaint counters that have ever been incremented.
- If sym_reading is 1, be less verbose about successive complaints,
- since the messages are appearing all together during a command that
- reads symbols (rather than scattered around as psymtabs get fleshed
- out into symtabs at random times). If noisy is 1, we are in a
- noisy symbol reading command, and our caller will print enough
- context for the user to figure it out. */
-
-void
-clear_complaints (sym_reading, noisy)
- int sym_reading;
- int noisy;
-{
- struct complaint *p;
-
- for (p = complaint_root->next; p != complaint_root; p = p->next)
- p->counter = 0;
-
- if (!sym_reading && !noisy && complaint_series > 1) {
- /* Terminate previous series, since caller won't. */
- puts_filtered ("\n");
- }
-
- complaint_series = sym_reading? 1 + noisy: 0;
-}
\f
enum language
deduce_language_from_filename (filename)
char *filename;
{
- char *c = strrchr (filename, '.');
+ char *c;
- if (!c) ; /* Get default. */
- else if(!strcmp(c,".mod"))
- return language_m2;
- else if(!strcmp(c,".c"))
- return language_c;
- else if(!strcmp(c,".cc") || !strcmp(c,".C"))
- return language_cplus;
+ if (0 == filename)
+ ; /* Get default */
+ else if (0 == (c = strrchr (filename, '.')))
+ ; /* Get default. */
+ else if (STREQ(c,".mod"))
+ return language_m2;
+ else if (STREQ(c,".c"))
+ return language_c;
+ else if (STREQ (c,".cc") || STREQ (c,".C") || STREQ (c, ".cxx"))
+ return language_cplus;
+ else if (STREQ (c,".ch") || STREQ (c,".c186") || STREQ (c,".c286"))
+ return language_chill;
return language_unknown; /* default */
}
symtab = (struct symtab *)
obstack_alloc (&objfile -> symbol_obstack, sizeof (struct symtab));
- (void) memset (symtab, 0, sizeof (*symtab));
+ memset (symtab, 0, sizeof (*symtab));
symtab -> filename = obsavestring (filename, strlen (filename),
&objfile -> symbol_obstack);
symtab -> fullname = NULL;
{
struct partial_symtab *psymtab;
- psymtab = (struct partial_symtab *)
- obstack_alloc (&objfile -> psymbol_obstack,
- sizeof (struct partial_symtab));
- (void) memset (psymtab, 0, sizeof (struct partial_symtab));
+ if (objfile -> free_psymtabs)
+ {
+ psymtab = objfile -> free_psymtabs;
+ objfile -> free_psymtabs = psymtab -> next;
+ }
+ else
+ psymtab = (struct partial_symtab *)
+ obstack_alloc (&objfile -> psymbol_obstack,
+ sizeof (struct partial_symtab));
+
+ memset (psymtab, 0, sizeof (struct partial_symtab));
psymtab -> filename = obsavestring (filename, strlen (filename),
&objfile -> psymbol_obstack);
psymtab -> symtab = NULL;
}
\f
+/* Reset all data structures in gdb which may contain references to symbol
+ table date. */
+
+void
+clear_symtab_users ()
+{
+ /* Someday, we should do better than this, by only blowing away
+ the things that really need to be blown. */
+ clear_value_history ();
+ clear_displays ();
+ clear_internalvars ();
+ breakpoint_re_set ();
+ set_default_breakpoint (0, 0, 0, 0);
+ current_source_symtab = 0;
+ current_source_line = 0;
+ clear_pc_function_cache ();
+}
+
/* clear_symtab_users_once:
This function is run after symbol reading, or from a cleanup.
reading, is because the cleanup protects us in case of errors, but is
discarded if symbol reading is successful. */
+#if 0
+/* FIXME: As free_named_symtabs is currently a big noop this function
+ is no longer needed. */
+static void
+clear_symtab_users_once PARAMS ((void));
+
static int clear_symtab_users_queued;
static int clear_symtab_users_done;
return;
clear_symtab_users_done = clear_symtab_users_queued;
- printf ("Resetting debugger state after updating old symbol tables\n");
-
- /* Someday, we should do better than this, by only blowing away
- the things that really need to be blown. */
- clear_value_history ();
- clear_displays ();
- clear_internalvars ();
- breakpoint_re_set ();
- set_default_breakpoint (0, 0, 0, 0);
- current_source_symtab = 0;
+ clear_symtab_users ();
}
+#endif
/* Delete the specified psymtab, and any others that reference it. */
cashier_psymtab (pst)
struct partial_symtab *pst;
{
- struct partial_symtab *ps, *pprev;
+ struct partial_symtab *ps, *pprev = NULL;
int i;
/* Find its previous psymtab in the chain */
free_named_symtabs (name)
char *name;
{
- register struct symtab *s;
- register struct symtab *prev;
- register struct partial_symtab *ps;
- struct blockvector *bv;
- int blewit = 0;
-
#if 0
/* FIXME: With the new method of each objfile having it's own
psymtab list, this function needs serious rethinking. In particular,
why was it ever necessary to toss psymtabs with specific compilation
unit filenames, as opposed to all psymtabs from a particular symbol
- file. */
+ file? -- fnf
+ Well, the answer is that some systems permit reloading of particular
+ compilation units. We want to blow away any old info about these
+ compilation units, regardless of which objfiles they arrived in. --gnu. */
+
+ register struct symtab *s;
+ register struct symtab *prev;
+ register struct partial_symtab *ps;
+ struct blockvector *bv;
+ int blewit = 0;
/* We only wack things if the symbol-reload switch is set. */
if (!symbol_reloading)
again2:
for (ps = partial_symtab_list; ps; ps = ps->next) {
- if (!strcmp (name, ps->filename)) {
+ if (STREQ (name, ps->filename)) {
cashier_psymtab (ps); /* Blow it away...and its little dog, too. */
goto again2; /* Must restart, chain has been munged */
}
for (s = symtab_list; s; s = s->next)
{
- if (!strcmp (name, s->filename))
+ if (STREQ (name, s->filename))
break;
prev = s;
}
struct partial_symtab *
-start_psymtab_common (objfile, addr,
+start_psymtab_common (objfile, section_offsets,
filename, textlow, global_syms, static_syms)
struct objfile *objfile;
- CORE_ADDR addr;
+ struct section_offsets *section_offsets;
char *filename;
CORE_ADDR textlow;
struct partial_symbol *global_syms;
struct partial_symtab *psymtab;
psymtab = allocate_psymtab (filename, objfile);
- psymtab -> addr = addr;
+ psymtab -> section_offsets = section_offsets;
psymtab -> textlow = textlow;
psymtab -> texthigh = psymtab -> textlow; /* default */
psymtab -> globals_offset = global_syms - objfile -> global_psymbols.list;
psymtab -> statics_offset = static_syms - objfile -> static_psymbols.list;
return (psymtab);
}
+\f
+/* Debugging versions of functions that are usually inline macros
+ (see symfile.h). */
+
+#if !INLINE_ADD_PSYMBOL
+
+/* Add a symbol with a long value to a psymtab.
+ Since one arg is a struct, we pass in a ptr and deref it (sigh). */
+
+void
+add_psymbol_to_list (name, namelength, namespace, class, list, val, language,
+ objfile)
+ char *name;
+ int namelength;
+ enum namespace namespace;
+ enum address_class class;
+ struct psymbol_allocation_list *list;
+ long val;
+ enum language language;
+ struct objfile *objfile;
+{
+ register struct partial_symbol *psym;
+ register char *demangled_name;
+
+ if (list->next >= list->list + list->size)
+ {
+ extend_psymbol_list (list,objfile);
+ }
+ psym = list->next++;
+
+ SYMBOL_NAME (psym) =
+ (char *) obstack_alloc (&objfile->psymbol_obstack, namelength + 1);
+ memcpy (SYMBOL_NAME (psym), name, namelength);
+ SYMBOL_NAME (psym)[namelength] = '\0';
+ SYMBOL_VALUE (psym) = val;
+ SYMBOL_LANGUAGE (psym) = language;
+ PSYMBOL_NAMESPACE (psym) = namespace;
+ PSYMBOL_CLASS (psym) = class;
+ SYMBOL_INIT_DEMANGLED_NAME (psym, &objfile->psymbol_obstack);
+}
+
+/* Add a symbol with a CORE_ADDR value to a psymtab. */
+
+void
+add_psymbol_addr_to_list (name, namelength, namespace, class, list, val,
+ language, objfile)
+ char *name;
+ int namelength;
+ enum namespace namespace;
+ enum address_class class;
+ struct psymbol_allocation_list *list;
+ CORE_ADDR val;
+ enum language language;
+ struct objfile *objfile;
+{
+ register struct partial_symbol *psym;
+ register char *demangled_name;
+
+ if (list->next >= list->list + list->size)
+ {
+ extend_psymbol_list (list,objfile);
+ }
+ psym = list->next++;
+
+ SYMBOL_NAME (psym) =
+ (char *) obstack_alloc (&objfile->psymbol_obstack, namelength + 1);
+ memcpy (SYMBOL_NAME (psym), name, namelength);
+ SYMBOL_NAME (psym)[namelength] = '\0';
+ SYMBOL_VALUE_ADDRESS (psym) = val;
+ SYMBOL_LANGUAGE (psym) = language;
+ PSYMBOL_NAMESPACE (psym) = namespace;
+ PSYMBOL_CLASS (psym) = class;
+ SYMBOL_INIT_DEMANGLED_NAME (psym, &objfile->psymbol_obstack);
+}
+
+#endif /* !INLINE_ADD_PSYMBOL */
\f
void
_initialize_symfile ()
{
-
- add_com ("symbol-file", class_files, symbol_file_command,
+ struct cmd_list_element *c;
+
+ c = add_cmd ("symbol-file", class_files, symbol_file_command,
"Load symbol table from executable file FILE.\n\
The `file' command can also load symbol tables, as well as setting the file\n\
-to execute.");
+to execute.", &cmdlist);
+ c->completer = filename_completer;
- add_com ("add-symbol-file", class_files, add_symbol_file_command,
+ c = add_cmd ("add-symbol-file", class_files, add_symbol_file_command,
"Load the symbols from FILE, assuming FILE has been dynamically loaded.\n\
-The second argument provides the starting address of the file's text.");
+The second argument provides the starting address of the file's text.",
+ &cmdlist);
+ c->completer = filename_completer;
- add_com ("load", class_files, load_command,
+ c = add_cmd ("load", class_files, load_command,
"Dynamically load FILE into the running program, and record its symbols\n\
-for access from GDB.");
-
- add_show_from_set
- (add_set_cmd ("complaints", class_support, var_zinteger,
- (char *)&stop_whining,
- "Set max number of complaints about incorrect symbols.",
- &setlist),
- &showlist);
+for access from GDB.", &cmdlist);
+ c->completer = filename_completer;
add_show_from_set
(add_set_cmd ("symbol-reloading", class_support, var_boolean,