/* Generic symbol file reading for the GNU debugger, GDB.
- Copyright 1990, 1991 Free Software Foundation, Inc.
+ Copyright 1990-1996, 1998, 2000 Free Software Foundation, Inc.
Contributed by Cygnus Support, using pieces from other GDB modules.
-This file is part of GDB.
+ This file is part of GDB.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
-#include <stdio.h>
#include "defs.h"
#include "symtab.h"
-#include "param.h"
+#include "gdbtypes.h"
#include "gdbcore.h"
#include "frame.h"
#include "target.h"
#include "value.h"
#include "symfile.h"
+#include "objfiles.h"
#include "gdbcmd.h"
#include "breakpoint.h"
+#include "language.h"
+#include "complaints.h"
+#include "demangle.h"
+#include "inferior.h" /* for write_pc */
+#include "gdb-stabs.h"
+#include "obstack.h"
-#include <obstack.h>
#include <assert.h>
-
#include <sys/types.h>
#include <fcntl.h>
-#include <string.h>
-#include <sys/stat.h>
+#include "gdb_string.h"
+#include "gdb_stat.h"
+#include <ctype.h>
+#include <time.h>
+
+#ifndef O_BINARY
+#define O_BINARY 0
+#endif
+
+#ifdef HPUXHPPA
+
+/* Some HP-UX related globals to clear when a new "main"
+ symbol file is loaded. HP-specific. */
+
+extern int hp_som_som_object_present;
+extern int hp_cxx_exception_support_initialized;
+#define RESET_HP_UX_GLOBALS() do {\
+ hp_som_som_object_present = 0; /* indicates HP-compiled code */ \
+ hp_cxx_exception_support_initialized = 0; /* must reinitialize exception stuff */ \
+ } while (0)
+#endif
+
+int (*ui_load_progress_hook) (const char *section, unsigned long num);
+void (*show_load_progress) (const char *section,
+ unsigned long section_sent,
+ unsigned long section_size,
+ unsigned long total_sent,
+ unsigned long total_size);
+void (*pre_add_symbol_hook) PARAMS ((char *));
+void (*post_add_symbol_hook) PARAMS ((void));
+void (*target_new_objfile_hook) PARAMS ((struct objfile *));
+
+/* Global variables owned by this file */
+int readnow_symbol_files; /* Read full symbols immediately */
+
+struct complaint oldsyms_complaint =
+{
+ "Replacing old symbols for `%s'", 0, 0
+};
+
+struct complaint empty_symtab_complaint =
+{
+ "Empty symbol table found for `%s'", 0, 0
+};
+
+struct complaint unknown_option_complaint =
+{
+ "Unknown option `%s' ignored", 0, 0
+};
+
+/* External variables and functions referenced. */
extern int info_verbose;
-extern void qsort ();
-extern char *getenv ();
+extern void report_transfer_performance PARAMS ((unsigned long,
+ time_t, time_t));
/* Functions this file defines */
-static bfd *symfile_open();
-static struct sym_fns *symfile_init();
-static void clear_symtab_users_once();
-/* List of all available sym_fns. */
+#if 0
+static int simple_read_overlay_region_table PARAMS ((void));
+static void simple_free_overlay_region_table PARAMS ((void));
+#endif
+
+static void set_initial_language PARAMS ((void));
+
+static void load_command PARAMS ((char *, int));
+
+static void add_symbol_file_command PARAMS ((char *, int));
+
+static void add_shared_symbol_files_command PARAMS ((char *, int));
+
+static void cashier_psymtab PARAMS ((struct partial_symtab *));
+
+static int compare_psymbols PARAMS ((const void *, const void *));
+
+static int compare_symbols PARAMS ((const void *, const void *));
+
+bfd *symfile_bfd_open PARAMS ((char *));
+
+static void find_sym_fns PARAMS ((struct objfile *));
+
+static void decrement_reading_symtab PARAMS ((void *));
+
+static void overlay_invalidate_all PARAMS ((void));
+
+static int overlay_is_mapped PARAMS ((struct obj_section *));
-struct sym_fns *symtab_fns = NULL;
+void list_overlays_command PARAMS ((char *, int));
-/* Saves the sym_fns of the current symbol table, so we can call
- the right XXX_new_init function when we free it. FIXME. This
- should be extended to calling the new_init function for each
- existing symtab or psymtab, since the main symbol file and
- subsequent added symbol files can have different types. */
+void map_overlay_command PARAMS ((char *, int));
-static struct sym_fns *symfile_fns;
+void unmap_overlay_command PARAMS ((char *, int));
-/* Allocate an obstack to hold objects that should be freed
- when we load a new symbol table.
- This includes the symbols made by dbxread
- and the types that are not permanent. */
+static void overlay_auto_command PARAMS ((char *, int));
-struct obstack obstack1;
+static void overlay_manual_command PARAMS ((char *, int));
-struct obstack *symbol_obstack = &obstack1;
+static void overlay_off_command PARAMS ((char *, int));
-/* This obstack will be used for partial_symbol objects. It can
- probably actually be the same as the symbol_obstack above, but I'd
- like to keep them seperate for now. If I want to later, I'll
- replace one with the other. */
+static void overlay_load_command PARAMS ((char *, int));
-struct obstack obstack2;
+static void overlay_command PARAMS ((char *, int));
-struct obstack *psymbol_obstack = &obstack2;
+static void simple_free_overlay_table PARAMS ((void));
-/* File name symbols were loaded from. */
+static void read_target_long_array PARAMS ((CORE_ADDR, unsigned int *, int));
-char *symfile = 0;
+static int simple_read_overlay_table PARAMS ((void));
-/* The modification date of the file when they were loaded. */
+static int simple_overlay_update_1 PARAMS ((struct obj_section *));
-long /* really time_t */ symfile_mtime = 0;
+static void add_filename_language PARAMS ((char *ext, enum language lang));
-/* Structures with which to manage partial symbol allocation. */
+static void set_ext_lang_command PARAMS ((char *args, int from_tty));
-struct psymbol_allocation_list global_psymbols = {0}, static_psymbols = {0};
+static void info_ext_lang_command PARAMS ((char *args, int from_tty));
+
+static void init_filename_language_table PARAMS ((void));
+
+void _initialize_symfile PARAMS ((void));
+
+/* List of all available sym_fns. On gdb startup, each object file reader
+ calls add_symtab_fns() to register information on each format it is
+ prepared to read. */
+
+static struct sym_fns *symtab_fns = NULL;
/* Flag for whether user will be reloading symbols multiple times.
Defaults to ON for VxWorks, otherwise OFF. */
int symbol_reloading = 0;
#endif
-/* Structure to manage complaints about symbol file contents. */
+/* If non-zero, then on HP-UX (i.e., platforms that use somsolib.c),
+ this variable is interpreted as a threshhold. If adding a new
+ library's symbol table to those already known to the debugger would
+ exceed this threshhold, then the shlib's symbols are not added.
+
+ If non-zero on other platforms, shared library symbols will be added
+ automatically when the inferior is created, new libraries are loaded,
+ or when attaching to the inferior. This is almost always what users
+ will want to have happen; but for very large programs, the startup
+ time will be excessive, and so if this is a problem, the user can
+ clear this flag and then add the shared library symbols as needed.
+ Note that there is a potential for confusion, since if the shared
+ library symbols are not loaded, commands like "info fun" will *not*
+ report all the functions that are actually present.
+
+ Note that HP-UX interprets this variable to mean, "threshhold size
+ in megabytes, where zero means never add". Other platforms interpret
+ this variable to mean, "always add if non-zero, never add if zero."
+ */
+
+int auto_solib_add = 1;
+\f
-struct complaint complaint_root[1] = {
- {(char *)0, 0, complaint_root},
-};
+/* Since this function is called from within qsort, in an ANSI environment
+ it must conform to the prototype for qsort, which specifies that the
+ comparison function takes two "void *" pointers. */
+
+static int
+compare_symbols (s1p, s2p)
+ const PTR s1p;
+ const PTR s2p;
+{
+ register struct symbol **s1, **s2;
+
+ s1 = (struct symbol **) s1p;
+ s2 = (struct symbol **) s2p;
-/* Some actual complaints. */
+ return (STRCMP (SYMBOL_NAME (*s1), SYMBOL_NAME (*s2)));
+}
-struct complaint oldsyms_complaint = {
- "Replacing old symbols for `%s'", 0, 0 };
+/*
-struct complaint empty_symtab_complaint = {
- "Empty symbol table found for `%s'", 0, 0 };
+ LOCAL FUNCTION
-\f
-/* In the following sort, we always make sure that
- register debug symbol declarations always come before regular
- debug symbol declarations (as might happen when parameters are
- then put into registers by the compiler). */
+ compare_psymbols -- compare two partial symbols by name
+
+ DESCRIPTION
+
+ Given pointers to pointers to two partial symbol table entries,
+ compare them by name and return -N, 0, or +N (ala strcmp).
+ Typically used by sorting routines like qsort().
+
+ NOTES
+
+ Does direct compare of first two characters before punting
+ and passing to strcmp for longer compares. Note that the
+ original version had a bug whereby two null strings or two
+ identically named one character strings would return the
+ comparison of memory following the null byte.
+
+ */
static int
-compare_symbols (s1, s2)
- struct symbol **s1, **s2;
+compare_psymbols (s1p, s2p)
+ const PTR s1p;
+ const PTR s2p;
{
- register int namediff;
+ register char *st1 = SYMBOL_NAME (*(struct partial_symbol **) s1p);
+ register char *st2 = SYMBOL_NAME (*(struct partial_symbol **) s2p);
- /* Compare the initial characters. */
- namediff = SYMBOL_NAME (*s1)[0] - SYMBOL_NAME (*s2)[0];
- if (namediff != 0) return namediff;
+ if ((st1[0] - st2[0]) || !st1[0])
+ {
+ return (st1[0] - st2[0]);
+ }
+ else if ((st1[1] - st2[1]) || !st1[1])
+ {
+ return (st1[1] - st2[1]);
+ }
+ else
+ {
+ /* Note: I replaced the STRCMP line (commented out below)
+ * with a simpler "strcmp()" which compares the 2 strings
+ * from the beginning. (STRCMP is a macro which first compares
+ * the initial characters, then falls back on strcmp).
+ * The reason is that the STRCMP line was tickling a C compiler
+ * bug on HP-UX 10.30, which is avoided with the simpler
+ * code. The performance gain from the more complicated code
+ * is negligible, given that we have already checked the
+ * initial 2 characters above. I reported the compiler bug,
+ * and once it is fixed the original line can be put back. RT
+ */
+ /* return ( STRCMP (st1 + 2, st2 + 2)); */
+ return (strcmp (st1, st2));
+ }
+}
- /* If they match, compare the rest of the names. */
- namediff = strcmp (SYMBOL_NAME (*s1), SYMBOL_NAME (*s2));
- if (namediff != 0) return namediff;
+void
+sort_pst_symbols (pst)
+ struct partial_symtab *pst;
+{
+ /* Sort the global list; don't sort the static list */
- /* For symbols of the same name, registers should come first. */
- return ((SYMBOL_CLASS (*s2) == LOC_REGISTER)
- - (SYMBOL_CLASS (*s1) == LOC_REGISTER));
+ qsort (pst->objfile->global_psymbols.list + pst->globals_offset,
+ pst->n_global_syms, sizeof (struct partial_symbol *),
+ compare_psymbols);
}
/* Call sort_block_syms to sort alphabetically the symbols of one block. */
sort_symtab_syms (s)
register struct symtab *s;
{
- register struct blockvector *bv = BLOCKVECTOR (s);
- int nbl = BLOCKVECTOR_NBLOCKS (bv);
+ register struct blockvector *bv;
+ int nbl;
int i;
register struct block *b;
+ if (s == 0)
+ return;
+ bv = BLOCKVECTOR (s);
+ nbl = BLOCKVECTOR_NBLOCKS (bv);
for (i = 0; i < nbl; i++)
{
b = BLOCKVECTOR_BLOCK (bv, i);
}
}
-void
-sort_all_symtab_syms ()
-{
- register struct symtab *s;
-
- for (s = symtab_list; s; s = s->next)
- {
- sort_symtab_syms (s);
- }
-}
-
-/* Make a copy of the string at PTR with SIZE characters in the symbol obstack
- (and add a null character at the end in the copy).
- Returns the address of the copy. */
+/* Make a null terminated copy of the string at PTR with SIZE characters in
+ the obstack pointed to by OBSTACKP . Returns the address of the copy.
+ Note that the string at PTR does not have to be null terminated, I.E. it
+ may be part of a larger string and we are only saving a substring. */
char *
-obsavestring (ptr, size)
+obsavestring (ptr, size, obstackp)
char *ptr;
int size;
+ struct obstack *obstackp;
{
- register char *p = (char *) obstack_alloc (symbol_obstack, size + 1);
- /* Open-coded bcopy--saves function call time.
- These strings are usually short. */
+ register char *p = (char *) obstack_alloc (obstackp, size + 1);
+ /* Open-coded memcpy--saves function call time. These strings are usually
+ short. FIXME: Is this really still true with a compiler that can
+ inline memcpy? */
{
register char *p1 = ptr;
register char *p2 = p;
return p;
}
-/* Concatenate strings S1, S2 and S3; return the new string.
- Space is found in the symbol_obstack. */
+/* Concatenate strings S1, S2 and S3; return the new string. Space is found
+ in the obstack pointed to by OBSTACKP. */
char *
-obconcat (s1, s2, s3)
- char *s1, *s2, *s3;
+obconcat (obstackp, s1, s2, s3)
+ struct obstack *obstackp;
+ const char *s1, *s2, *s3;
{
register int len = strlen (s1) + strlen (s2) + strlen (s3) + 1;
- register char *val = (char *) obstack_alloc (symbol_obstack, len);
+ register char *val = (char *) obstack_alloc (obstackp, len);
strcpy (val, s1);
strcat (val, s2);
strcat (val, s3);
return val;
}
-\f
-/* Accumulate the misc functions in bunches of 127.
- At the end, copy them all into one newly allocated structure. */
-#define MISC_BUNCH_SIZE 127
+/* True if we are nested inside psymtab_to_symtab. */
-struct misc_bunch
-{
- struct misc_bunch *next;
- struct misc_function contents[MISC_BUNCH_SIZE];
-};
+int currently_reading_symtab = 0;
-/* Bunch currently being filled up.
- The next field points to chain of filled bunches. */
+static void
+decrement_reading_symtab (dummy)
+ void *dummy;
+{
+ currently_reading_symtab--;
+}
-static struct misc_bunch *misc_bunch;
+/* Get the symbol table that corresponds to a partial_symtab.
+ This is fast after the first time you do it. In fact, there
+ is an even faster macro PSYMTAB_TO_SYMTAB that does the fast
+ case inline. */
-/* Number of slots filled in current bunch. */
+struct symtab *
+psymtab_to_symtab (pst)
+ register struct partial_symtab *pst;
+{
+ /* If it's been looked up before, return it. */
+ if (pst->symtab)
+ return pst->symtab;
-static int misc_bunch_index;
+ /* If it has not yet been read in, read it. */
+ if (!pst->readin)
+ {
+ struct cleanup *back_to = make_cleanup (decrement_reading_symtab, NULL);
+ currently_reading_symtab++;
+ (*pst->read_symtab) (pst);
+ do_cleanups (back_to);
+ }
-/* Total number of misc functions recorded so far. */
+ return pst->symtab;
+}
-static int misc_count;
+/* Initialize entry point information for this objfile. */
void
-init_misc_bunches ()
+init_entry_point_info (objfile)
+ struct objfile *objfile;
+{
+ /* Save startup file's range of PC addresses to help blockframe.c
+ decide where the bottom of the stack is. */
+
+ if (bfd_get_file_flags (objfile->obfd) & EXEC_P)
+ {
+ /* Executable file -- record its entry point so we'll recognize
+ the startup file because it contains the entry point. */
+ objfile->ei.entry_point = bfd_get_start_address (objfile->obfd);
+ }
+ else
+ {
+ /* Examination of non-executable.o files. Short-circuit this stuff. */
+ objfile->ei.entry_point = INVALID_ENTRY_POINT;
+ }
+ objfile->ei.entry_file_lowpc = INVALID_ENTRY_LOWPC;
+ objfile->ei.entry_file_highpc = INVALID_ENTRY_HIGHPC;
+ objfile->ei.entry_func_lowpc = INVALID_ENTRY_LOWPC;
+ objfile->ei.entry_func_highpc = INVALID_ENTRY_HIGHPC;
+ objfile->ei.main_func_lowpc = INVALID_ENTRY_LOWPC;
+ objfile->ei.main_func_highpc = INVALID_ENTRY_HIGHPC;
+}
+
+/* Get current entry point address. */
+
+CORE_ADDR
+entry_point_address ()
{
- misc_count = 0;
- misc_bunch = 0;
- misc_bunch_index = MISC_BUNCH_SIZE;
+ return symfile_objfile ? symfile_objfile->ei.entry_point : 0;
}
+/* Remember the lowest-addressed loadable section we've seen.
+ This function is called via bfd_map_over_sections.
+
+ In case of equal vmas, the section with the largest size becomes the
+ lowest-addressed loadable section.
+
+ If the vmas and sizes are equal, the last section is considered the
+ lowest-addressed loadable section. */
+
void
-prim_record_misc_function (name, address, misc_type)
- char *name;
- CORE_ADDR address;
- enum misc_function_type misc_type;
+find_lowest_section (abfd, sect, obj)
+ bfd *abfd;
+ asection *sect;
+ PTR obj;
{
- register struct misc_bunch *new;
+ asection **lowest = (asection **) obj;
- if (misc_bunch_index == MISC_BUNCH_SIZE)
- {
- new = (struct misc_bunch *) xmalloc (sizeof (struct misc_bunch));
- misc_bunch_index = 0;
- new->next = misc_bunch;
- misc_bunch = new;
- }
- misc_bunch->contents[misc_bunch_index].name = name;
- misc_bunch->contents[misc_bunch_index].address = address;
- misc_bunch->contents[misc_bunch_index].type = misc_type;
- misc_bunch->contents[misc_bunch_index].misc_info = 0;
- misc_bunch_index++;
- misc_count++;
+ if (0 == (bfd_get_section_flags (abfd, sect) & SEC_LOAD))
+ return;
+ if (!*lowest)
+ *lowest = sect; /* First loadable section */
+ else if (bfd_section_vma (abfd, *lowest) > bfd_section_vma (abfd, sect))
+ *lowest = sect; /* A lower loadable section */
+ else if (bfd_section_vma (abfd, *lowest) == bfd_section_vma (abfd, sect)
+ && (bfd_section_size (abfd, (*lowest))
+ <= bfd_section_size (abfd, sect)))
+ *lowest = sect;
}
-static int
-compare_misc_functions (fn1, fn2)
- struct misc_function *fn1, *fn2;
-{
- /* Return a signed result based on unsigned comparisons
- so that we sort into unsigned numeric order. */
- if (fn1->address < fn2->address)
- return -1;
- if (fn1->address > fn2->address)
- return 1;
- return 0;
-}
+/* Parse the user's idea of an offset for dynamic linking, into our idea
+ of how to represent it for fast symbol reading. This is the default
+ version of the sym_fns.sym_offsets function for symbol readers that
+ don't need to do anything special. It allocates a section_offsets table
+ for the objectfile OBJFILE and stuffs ADDR into all of the offsets. */
-/* ARGSUSED */
void
-discard_misc_bunches (foo)
- int foo;
+default_symfile_offsets (objfile, addrs)
+ struct objfile *objfile;
+ struct section_addr_info *addrs;
{
- register struct misc_bunch *next;
+ int i;
+
+ objfile->num_sections = SECT_OFF_MAX;
+ objfile->section_offsets = (struct section_offsets *)
+ obstack_alloc (&objfile->psymbol_obstack, SIZEOF_SECTION_OFFSETS);
+ memset (objfile->section_offsets, 0, SIZEOF_SECTION_OFFSETS);
- while (misc_bunch)
+ /* If user explicitly specified values for data and bss, set them here. */
+
+ if (addrs->text_addr)
+ ANOFFSET (objfile->section_offsets, SECT_OFF_TEXT) = addrs->text_addr;
+ if (addrs->data_addr)
+ ANOFFSET (objfile->section_offsets, SECT_OFF_DATA) = addrs->data_addr;
+ if (addrs->bss_addr)
+ ANOFFSET (objfile->section_offsets, SECT_OFF_BSS) = addrs->bss_addr;
+
+ /* Now calculate offsets for other sections. */
+ for (i = 0; i < MAX_SECTIONS && addrs->other[i].name; i++)
{
- next = misc_bunch->next;
- free (misc_bunch);
- misc_bunch = next;
+ struct other_sections *osp ;
+
+ osp = &addrs->other[i] ;
+ if (addrs->other[i].addr == 0)
+ continue;
+#if 0
+ if (strcmp (".text", osp->name) == 0)
+ SECT_OFF_TEXT = osp->sectindex ;
+ else if (strcmp (".data", osp->name) == 0)
+ SECT_OFF_DATA = osp->sectindex ;
+ else if (strcmp (".bss", osp->name) == 0)
+ SECT_OFF_BSS = osp->sectindex ;
+#endif
+ /* Record all sections in offsets */
+ ANOFFSET (objfile->section_offsets, osp->sectindex) = osp->addr;
}
}
-/* INCLINK nonzero means bunches are from an incrementally-linked file.
- Add them to the existing bunches.
- Otherwise INCLINK is zero, and we start from scratch. */
+
+/* Process a symbol file, as either the main file or as a dynamically
+ loaded file.
+
+ OBJFILE is where the symbols are to be read from.
+
+ ADDR is the address where the text segment was loaded, unless the
+ objfile is the main symbol file, in which case it is zero.
+
+ MAINLINE is nonzero if this is the main symbol file, or zero if
+ it's an extra symbol file such as dynamically loaded code.
+
+ VERBO is nonzero if the caller has printed a verbose message about
+ the symbol reading (and complaints can be more terse about it). */
+
void
-condense_misc_bunches (inclink)
- int inclink;
+syms_from_objfile (objfile, addrs, mainline, verbo)
+ struct objfile *objfile;
+ struct section_addr_info *addrs;
+ int mainline;
+ int verbo;
{
- register int i, j;
- register struct misc_bunch *bunch;
+ struct section_offsets *section_offsets;
+ asection *lower_sect;
+ asection *sect;
+ CORE_ADDR lower_offset;
+ struct section_addr_info local_addr;
+ struct cleanup *old_chain;
+ int i;
+
+ /* If ADDRS is NULL, initialize the local section_addr_info struct and
+ point ADDRS to it. We now establish the convention that an addr of
+ zero means no load address was specified. */
+
+ if (addrs == NULL)
+ {
+ memset (&local_addr, 0, sizeof (local_addr));
+ addrs = &local_addr;
+ }
+
+ init_entry_point_info (objfile);
+ find_sym_fns (objfile);
+
+ /* Make sure that partially constructed symbol tables will be cleaned up
+ if an error occurs during symbol reading. */
+ old_chain = make_cleanup ((make_cleanup_func) free_objfile, objfile);
+
+ if (mainline)
+ {
+ /* We will modify the main symbol table, make sure that all its users
+ will be cleaned up if an error occurs during symbol reading. */
+ make_cleanup ((make_cleanup_func) clear_symtab_users, 0);
+
+ /* Since no error yet, throw away the old symbol table. */
+
+ if (symfile_objfile != NULL)
+ {
+ free_objfile (symfile_objfile);
+ symfile_objfile = NULL;
+ }
- if (inclink)
+ /* Currently we keep symbols from the add-symbol-file command.
+ If the user wants to get rid of them, they should do "symbol-file"
+ without arguments first. Not sure this is the best behavior
+ (PR 2207). */
+
+ (*objfile->sf->sym_new_init) (objfile);
+ }
+
+ /* Convert addr into an offset rather than an absolute address.
+ We find the lowest address of a loaded segment in the objfile,
+ and assume that <addr> is where that got loaded.
+
+ We no longer warn if the lowest section is not a text segment (as
+ happens for the PA64 port. */
+ if (mainline)
{
- misc_function_vector
- = (struct misc_function *)
- xrealloc (misc_function_vector, (misc_count + misc_function_count)
- * sizeof (struct misc_function));
- j = misc_function_count;
+ /* No offset from objfile addresses. */
+ addrs -> text_addr = 0;
+ addrs -> data_addr = 0;
+ addrs -> bss_addr = 0;
}
else
{
- misc_function_vector
- = (struct misc_function *)
- xmalloc (misc_count * sizeof (struct misc_function));
- j = 0;
+ /* Find lowest loadable section to be used as starting point for
+ continguous sections. FIXME!! won't work without call to find
+ .text first, but this assumes text is lowest section. */
+ lower_sect = bfd_get_section_by_name (objfile->obfd, ".text");
+ if (lower_sect == NULL)
+ bfd_map_over_sections (objfile->obfd, find_lowest_section,
+ (PTR) &lower_sect);
+ if (lower_sect == NULL)
+ warning ("no loadable sections found in added symbol-file %s",
+ objfile->name);
+ else if ((bfd_get_section_flags (objfile->obfd, lower_sect) & SEC_CODE)
+ == 0)
+ warning ("Lowest section in %s is %s at %s",
+ objfile->name,
+ bfd_section_name (objfile->obfd, lower_sect),
+ paddr (bfd_section_vma (objfile->obfd, lower_sect)));
+ if (lower_sect != NULL)
+ lower_offset = bfd_section_vma (objfile->obfd, lower_sect);
+ else
+ lower_offset = 0;
+
+ /* Calculate offsets for the loadable sections.
+ FIXME! Sections must be in order of increasing loadable section
+ so that contiguous sections can use the lower-offset!!!
+
+ Adjust offsets if the segments are not contiguous.
+ If the section is contiguous, its offset should be set to
+ the offset of the highest loadable section lower than it
+ (the loadable section directly below it in memory).
+ this_offset = lower_offset = lower_addr - lower_orig_addr */
+
+ /* FIXME: These sections will not need special treatment because ALL
+ sections are in the other sections table */
+
+ if (addrs->text_addr != 0)
+ {
+ sect = bfd_get_section_by_name (objfile->obfd, ".text");
+ if (sect)
+ {
+ addrs->text_addr -= bfd_section_vma (objfile->obfd, sect);
+ lower_offset = addrs->text_addr;
+ }
+ }
+ else
+ /* ??? who's below me? */
+ addrs->text_addr = lower_offset;
+
+ if (addrs->data_addr != 0)
+ {
+ sect = bfd_get_section_by_name (objfile->obfd, ".data");
+ if (sect)
+ {
+ addrs->data_addr -= bfd_section_vma (objfile->obfd, sect);
+ lower_offset = addrs->data_addr;
+ }
+ }
+ else
+ addrs->data_addr = lower_offset;
+
+ if (addrs->bss_addr != 0)
+ {
+ sect = bfd_get_section_by_name (objfile->obfd, ".bss");
+ if (sect)
+ {
+ addrs->bss_addr -= bfd_section_vma (objfile->obfd, sect);
+ lower_offset = addrs->bss_addr;
+ }
+ }
+ else
+ addrs->bss_addr = lower_offset;
+
+ /* Now calculate offsets for other sections. */
+ for (i=0 ; i < MAX_SECTIONS && addrs->other[i].name; i++)
+ {
+
+ if (addrs->other[i].addr != 0)
+ {
+ sect=bfd_get_section_by_name(objfile->obfd, addrs->other[i].name);
+ if (sect)
+ {
+ addrs->other[i].addr -= bfd_section_vma (objfile->obfd, sect);
+ lower_offset = addrs->other[i].addr;
+ addrs->other[i].sectindex = sect->index ;
+ }
+ else
+ {
+ warning ("section %s not found in %s", addrs->other[i].name,
+ objfile->name);
+ addrs->other[i].addr = 0;
+ }
+ }
+ else
+ addrs->other[i].addr = lower_offset;
+ }
}
- bunch = misc_bunch;
- while (bunch)
+ /* Initialize symbol reading routines for this objfile, allow complaints to
+ appear for this new file, and record how verbose to be, then do the
+ initial symbol reading for this file. */
+
+ (*objfile->sf->sym_init) (objfile);
+ clear_complaints (1, verbo);
+
+ (*objfile->sf->sym_offsets) (objfile, addrs);
+
+#ifndef IBM6000_TARGET
+ /* This is a SVR4/SunOS specific hack, I think. In any event, it
+ screws RS/6000. sym_offsets should be doing this sort of thing,
+ because it knows the mapping between bfd sections and
+ section_offsets. */
+ /* This is a hack. As far as I can tell, section offsets are not
+ target dependent. They are all set to addr with a couple of
+ exceptions. The exceptions are sysvr4 shared libraries, whose
+ offsets are kept in solib structures anyway and rs6000 xcoff
+ which handles shared libraries in a completely unique way.
+
+ Section offsets are built similarly, except that they are built
+ by adding addr in all cases because there is no clear mapping
+ from section_offsets into actual sections. Note that solib.c
+ has a different algorithm for finding section offsets.
+
+ These should probably all be collapsed into some target
+ independent form of shared library support. FIXME. */
+
+ if (addrs)
{
- for (i = 0; i < misc_bunch_index; i++, j++)
- {
- misc_function_vector[j] = bunch->contents[i];
-#ifdef NAMES_HAVE_UNDERSCORE
- if (misc_function_vector[j].name[0] == '_')
- misc_function_vector[j].name++;
-#endif
+ struct obj_section *s;
+
+ /* Map section offsets in "addr" back to the object's
+ sections by comparing the section names with bfd's
+ section names. Then adjust the section address by
+ the offset. */ /* for gdb/13815 */
+
+ ALL_OBJFILE_OSECTIONS (objfile, s)
+ {
+ CORE_ADDR s_addr = 0;
+ int i;
+
+ if (strcmp (s->the_bfd_section->name, ".text") == 0)
+ s_addr = addrs->text_addr;
+ else if (strcmp (s->the_bfd_section->name, ".data") == 0)
+ s_addr = addrs->data_addr;
+ else if (strcmp (s->the_bfd_section->name, ".bss") == 0)
+ s_addr = addrs->bss_addr;
+ else
+ for (i = 0; !s_addr && addrs->other[i].name; i++)
+ if (strcmp (s->the_bfd_section->name, addrs->other[i].name) == 0)
+ s_addr = addrs->other[i].addr; /* end added for gdb/13815 */
+
+ s->addr -= s->offset;
+ s->addr += s_addr;
+ s->endaddr -= s->offset;
+ s->endaddr += s_addr;
+ s->offset += s_addr;
}
- bunch = bunch->next;
- misc_bunch_index = MISC_BUNCH_SIZE;
}
+#endif /* not IBM6000_TARGET */
- if (misc_function_count + misc_count != j) /* DEBUG */
- printf_filtered ("Function counts are off! %d + %d != %d\n",
- misc_function_count, misc_count, j);
+ (*objfile->sf->sym_read) (objfile, mainline);
- misc_function_count = j;
+ if (!have_partial_symbols () && !have_full_symbols ())
+ {
+ wrap_here ("");
+ printf_filtered ("(no debugging symbols found)...");
+ wrap_here ("");
+ }
- /* Sort the misc functions by address. */
+ /* Don't allow char * to have a typename (else would get caddr_t).
+ Ditto void *. FIXME: Check whether this is now done by all the
+ symbol readers themselves (many of them now do), and if so remove
+ it from here. */
- qsort (misc_function_vector, misc_function_count,
- sizeof (struct misc_function),
- compare_misc_functions);
-}
+ TYPE_NAME (lookup_pointer_type (builtin_type_char)) = 0;
+ TYPE_NAME (lookup_pointer_type (builtin_type_void)) = 0;
+ /* Mark the objfile has having had initial symbol read attempted. Note
+ that this does not mean we found any symbols... */
-/* Get the symbol table that corresponds to a partial_symtab.
- This is fast after the first time you do it. In fact, there
- is an even faster macro PSYMTAB_TO_SYMTAB that does the fast
- case inline. */
+ objfile->flags |= OBJF_SYMS;
-struct symtab *
-psymtab_to_symtab (pst)
- register struct partial_symtab *pst;
+ /* Discard cleanups as symbol reading was successful. */
+
+ discard_cleanups (old_chain);
+
+ /* Call this after reading in a new symbol table to give target
+ dependant code a crack at the new symbols. For instance, this
+ could be used to update the values of target-specific symbols GDB
+ needs to keep track of (such as _sigtramp, or whatever). */
+
+ TARGET_SYMFILE_POSTREAD (objfile);
+}
+
+/* Perform required actions after either reading in the initial
+ symbols for a new objfile, or mapping in the symbols from a reusable
+ objfile. */
+
+void
+new_symfile_objfile (objfile, mainline, verbo)
+ struct objfile *objfile;
+ int mainline;
+ int verbo;
{
- register struct symtab *result;
- /* If it's been looked up before, return it. */
- if (pst->symtab)
- return pst->symtab;
+ /* If this is the main symbol file we have to clean up all users of the
+ old main symbol file. Otherwise it is sufficient to fixup all the
+ breakpoints that may have been redefined by this symbol file. */
+ if (mainline)
+ {
+ /* OK, make it the "real" symbol file. */
+ symfile_objfile = objfile;
- /* If it has not yet been read in, read it. */
- if (!pst->readin)
- {
- (*pst->read_symtab) (pst);
+ clear_symtab_users ();
+ }
+ else
+ {
+ breakpoint_re_set ();
}
- return pst->symtab;
+ /* We're done reading the symbol file; finish off complaints. */
+ clear_complaints (0, verbo);
}
/* Process a symbol file, as either the main file or as a dynamically
FROM_TTY says how verbose to be. MAINLINE specifies whether this
is the main symbol file, or whether it's an extra symbol file such
as dynamically loaded code. If !mainline, ADDR is the address
- where the text segment was loaded. */
+ where the text segment was loaded.
-void
-symbol_file_add (name, from_tty, addr, mainline)
+ Upon success, returns a pointer to the objfile that was added.
+ Upon failure, jumps back to command level (never returns). */
+
+struct objfile *
+symbol_file_add (name, from_tty, addrs, mainline, flags)
char *name;
int from_tty;
- CORE_ADDR addr;
+ struct section_addr_info *addrs;
int mainline;
+ int flags;
{
- bfd *sym_bfd;
- asection *text_sect;
- struct sym_fns *sf;
- char *realname;
+ struct objfile *objfile;
+ struct partial_symtab *psymtab;
+ bfd *abfd;
- sym_bfd = symfile_open (name);
+ /* Open a bfd for the file, and give user a chance to burp if we'd be
+ interactively wiping out any existing symbols. */
- entry_point = bfd_get_start_address (sym_bfd);
+ abfd = symfile_bfd_open (name);
- if (mainline)
- symfile_mtime = bfd_get_mtime (sym_bfd);
-
- /* There is a distinction between having no symbol table
- (we refuse to read the file, leaving the old set of symbols around)
- and having no debugging symbols in your symbol table (we read
- the file and end up with a mostly empty symbol table). */
-
- if (!(bfd_get_file_flags (sym_bfd) & HAS_SYMS))
- {
- error ("%s has no symbol-table", name);
- }
-
- if ((symtab_list || partial_symtab_list)
+ if ((have_full_symbols () || have_partial_symbols ())
&& mainline
&& from_tty
&& !query ("Load new symbol table from \"%s\"? ", name))
error ("Not confirmed.");
- if (from_tty)
- {
- printf_filtered ("Reading symbols from %s...", name);
- wrap_here ("");
- fflush (stdout);
- }
+ objfile = allocate_objfile (abfd, flags);
- sf = symfile_init (sym_bfd);
- realname = bfd_get_filename (sym_bfd);
- realname = savestring (realname, strlen (realname));
- /* FIXME, this probably creates a storage leak... */
+ /* If the objfile uses a mapped symbol file, and we have a psymtab for
+ it, then skip reading any symbols at this time. */
- if (mainline)
+ if ((objfile->flags & OBJF_MAPPED) && (objfile->flags & OBJF_SYMS))
{
- /* Since no error yet, throw away the old symbol table. */
-
- if (symfile)
- free (symfile);
- symfile = 0;
- free_all_symtabs ();
- free_all_psymtabs ();
-
- (*sf->sym_new_init) ();
-
- /* For mainline, caller didn't know the specified address of the
- text section. We fix that here. */
- text_sect = bfd_get_section_by_name (sym_bfd, ".text");
- addr = bfd_section_vma (sym_bfd, text_sect);
+ /* We mapped in an existing symbol table file that already has had
+ initial symbol reading performed, so we can skip that part. Notify
+ the user that instead of reading the symbols, they have been mapped.
+ */
+ if (from_tty || info_verbose)
+ {
+ printf_filtered ("Mapped symbols for %s...", name);
+ wrap_here ("");
+ gdb_flush (gdb_stdout);
+ }
+ init_entry_point_info (objfile);
+ find_sym_fns (objfile);
+ }
+ else
+ {
+ /* We either created a new mapped symbol table, mapped an existing
+ symbol table file which has not had initial symbol reading
+ performed, or need to read an unmapped symbol table. */
+ if (from_tty || info_verbose)
+ {
+ if (pre_add_symbol_hook)
+ pre_add_symbol_hook (name);
+ else
+ {
+ printf_filtered ("Reading symbols from %s...", name);
+ wrap_here ("");
+ gdb_flush (gdb_stdout);
+ }
+ }
+ syms_from_objfile (objfile, addrs, mainline, from_tty);
}
- clear_complaints(); /* Allow complaints to appear for this new file. */
-
- (*sf->sym_read) (sf, addr, mainline);
+ /* We now have at least a partial symbol table. Check to see if the
+ user requested that all symbols be read on initial access via either
+ the gdb startup command line or on a per symbol file basis. Expand
+ all partial symbol tables for this objfile if so. */
- /* Don't allow char * to have a typename (else would get caddr_t.) */
- /* Ditto void *. FIXME should do this for all the builtin types. */
+ if ((flags & OBJF_READNOW) || readnow_symbol_files)
+ {
+ if (from_tty || info_verbose)
+ {
+ printf_filtered ("expanding to full symbols...");
+ wrap_here ("");
+ gdb_flush (gdb_stdout);
+ }
- TYPE_NAME (lookup_pointer_type (builtin_type_char)) = 0;
- TYPE_NAME (lookup_pointer_type (builtin_type_void)) = 0;
+ for (psymtab = objfile->psymtabs;
+ psymtab != NULL;
+ psymtab = psymtab->next)
+ {
+ psymtab_to_symtab (psymtab);
+ }
+ }
- if (mainline)
+ if (from_tty || info_verbose)
{
- /* OK, make it the "real" symbol file. */
- symfile = realname;
- symfile_fns = sf;
+ if (post_add_symbol_hook)
+ post_add_symbol_hook ();
+ else
+ {
+ printf_filtered ("done.\n");
+ gdb_flush (gdb_stdout);
+ }
}
- /* If we have wiped out any old symbol tables, clean up. */
- clear_symtab_users_once ();
+ new_symfile_objfile (objfile, mainline, from_tty);
- if (from_tty)
- {
- printf_filtered ("done.\n");
- fflush (stdout);
- }
+ if (target_new_objfile_hook)
+ target_new_objfile_hook (objfile);
+
+ return (objfile);
}
-/* This is the symbol-file command. Read the file, analyze its symbols,
- and add a struct symtab to symtab_list. */
+/* This is the symbol-file command. Read the file, analyze its
+ symbols, and add a struct symtab to a symtab list. The syntax of
+ the command is rather bizarre--(1) buildargv implements various
+ quoting conventions which are undocumented and have little or
+ nothing in common with the way things are quoted (or not quoted)
+ elsewhere in GDB, (2) options are used, which are not generally
+ used in GDB (perhaps "set mapped on", "set readnow on" would be
+ better), (3) the order of options matters, which is contrary to GNU
+ conventions (because it is confusing and inconvenient). */
void
-symbol_file_command (name, from_tty)
- char *name;
+symbol_file_command (args, from_tty)
+ char *args;
int from_tty;
{
+ char **argv;
+ char *name = NULL;
+ CORE_ADDR text_relocation = 0; /* text_relocation */
+ struct cleanup *cleanups;
+ int flags = OBJF_USERLOADED;
dont_repeat ();
- if (name == 0)
+ if (args == NULL)
{
- if ((symtab_list || partial_symtab_list)
+ if ((have_full_symbols () || have_partial_symbols ())
&& from_tty
- && !query ("Discard symbol table from `%s'? ", symfile))
+ && !query ("Discard symbol table from `%s'? ",
+ symfile_objfile->name))
error ("Not confirmed.");
- if (symfile)
- free (symfile);
- symfile = 0;
- free_all_symtabs ();
- free_all_psymtabs ();
- /* FIXME, this does not account for the main file and subsequent
- files (shared libs, dynloads, etc) having different formats.
- It only calls the cleanup routine for the main file's format. */
- if (symfile_fns) {
- (*symfile_fns->sym_new_init) ();
- free (symfile_fns);
- symfile_fns = 0;
- }
- return;
- }
-
- /* Getting new symbols may change our opinion about what is
- frameless. */
- reinit_frame_cache ();
+ free_all_objfiles ();
+
+ /* solib descriptors may have handles to objfiles. Since their
+ storage has just been released, we'd better wipe the solib
+ descriptors as well.
+ */
+#if defined(SOLIB_RESTART)
+ SOLIB_RESTART ();
+#endif
- symbol_file_add (name, from_tty, (CORE_ADDR)0, 1);
+ symfile_objfile = NULL;
+ if (from_tty)
+ {
+ printf_unfiltered ("No symbol file now.\n");
+ }
+#ifdef HPUXHPPA
+ RESET_HP_UX_GLOBALS ();
+#endif
+ }
+ else
+ {
+ if ((argv = buildargv (args)) == NULL)
+ {
+ nomem (0);
+ }
+ cleanups = make_cleanup_freeargv (argv);
+ while (*argv != NULL)
+ {
+ if (STREQ (*argv, "-mapped"))
+ {
+ flags |= OBJF_MAPPED;
+ }
+ else if (STREQ (*argv, "-readnow"))
+ {
+ flags |= OBJF_READNOW;
+ }
+ else if (**argv == '-')
+ {
+ error ("unknown option `%s'", *argv);
+ }
+ else
+ {
+ char *p;
+
+ name = *argv;
+
+ /* this is for rombug remote only, to get the text relocation by
+ using link command */
+ p = strrchr (name, '/');
+ if (p != NULL)
+ p++;
+ else
+ p = name;
+
+ target_link (p, &text_relocation);
+
+ if (text_relocation == (CORE_ADDR) 0)
+ return;
+ else if (text_relocation == (CORE_ADDR) -1)
+ {
+ symbol_file_add (name, from_tty, NULL, 1, flags);
+#ifdef HPUXHPPA
+ RESET_HP_UX_GLOBALS ();
+#endif
+ }
+ else
+ {
+ struct section_addr_info section_addrs;
+ memset (§ion_addrs, 0, sizeof (section_addrs));
+ section_addrs.text_addr = (CORE_ADDR) text_relocation;
+ symbol_file_add (name, from_tty, §ion_addrs, 0, flags);
+ }
+
+ /* Getting new symbols may change our opinion about what is
+ frameless. */
+ reinit_frame_cache ();
+
+ set_initial_language ();
+ }
+ argv++;
+ }
+
+ if (name == NULL)
+ {
+ error ("no symbol file name was specified");
+ }
+ TUIDO (((TuiOpaqueFuncPtr) tuiDisplayMainFunction));
+ do_cleanups (cleanups);
+ }
+}
+
+/* Set the initial language.
+
+ A better solution would be to record the language in the psymtab when reading
+ partial symbols, and then use it (if known) to set the language. This would
+ be a win for formats that encode the language in an easily discoverable place,
+ such as DWARF. For stabs, we can jump through hoops looking for specially
+ named symbols or try to intuit the language from the specific type of stabs
+ we find, but we can't do that until later when we read in full symbols.
+ FIXME. */
+
+static void
+set_initial_language ()
+{
+ struct partial_symtab *pst;
+ enum language lang = language_unknown;
+
+ pst = find_main_psymtab ();
+ if (pst != NULL)
+ {
+ if (pst->filename != NULL)
+ {
+ lang = deduce_language_from_filename (pst->filename);
+ }
+ if (lang == language_unknown)
+ {
+ /* Make C the default language */
+ lang = language_c;
+ }
+ set_language (lang);
+ expected_language = current_language; /* Don't warn the user */
+ }
}
-/* Open NAME and hand it off to BFD for preliminary analysis. Result
- is a BFD *, which includes a new copy of NAME dynamically allocated
- (which will be freed by the cleanup chain). In case of trouble,
- error() is called. */
+/* Open file specified by NAME and hand it off to BFD for preliminary
+ analysis. Result is a newly initialized bfd *, which includes a newly
+ malloc'd` copy of NAME (tilde-expanded and made absolute).
+ In case of trouble, error() is called. */
-static bfd *
-symfile_open (name)
+bfd *
+symfile_bfd_open (name)
char *name;
{
bfd *sym_bfd;
int desc;
char *absolute_name;
- name = tilde_expand (name);
- make_cleanup (free, name);
- desc = openp (getenv ("PATH"), 1, name, O_RDONLY, 0, &absolute_name);
+
+ name = tilde_expand (name); /* Returns 1st new malloc'd copy */
+
+ /* Look down path for it, allocate 2nd new malloc'd copy. */
+ desc = openp (getenv ("PATH"), 1, name, O_RDONLY | O_BINARY, 0, &absolute_name);
+#if defined(__GO32__) || defined(_WIN32)
+ if (desc < 0)
+ {
+ char *exename = alloca (strlen (name) + 5);
+ strcat (strcpy (exename, name), ".exe");
+ desc = openp (getenv ("PATH"), 1, exename, O_RDONLY | O_BINARY,
+ 0, &absolute_name);
+ }
+#endif
if (desc < 0)
- perror_with_name (name);
- else
{
- make_cleanup (free, absolute_name);
- name = absolute_name;
+ make_cleanup (free, name);
+ perror_with_name (name);
}
+ free (name); /* Free 1st new malloc'd copy */
+ name = absolute_name; /* Keep 2nd malloc'd copy in bfd */
+ /* It'll be freed in free_objfile(). */
- sym_bfd = bfd_fdopenr (name, NULL, desc);
+ sym_bfd = bfd_fdopenr (name, gnutarget, desc);
if (!sym_bfd)
{
close (desc);
- error ("Could not open `%s' to read symbols: %s",
- name, bfd_errmsg (bfd_error));
+ make_cleanup (free, name);
+ error ("\"%s\": can't open to read symbols: %s.", name,
+ bfd_errmsg (bfd_get_error ()));
}
- make_cleanup (bfd_close, sym_bfd);
+ sym_bfd->cacheable = true;
if (!bfd_check_format (sym_bfd, bfd_object))
- error ("\"%s\": can't read symbols: %s.",
- name, bfd_errmsg (bfd_error));
-
- return sym_bfd;
+ {
+ /* FIXME: should be checking for errors from bfd_close (for one thing,
+ on error it does not free all the storage associated with the
+ bfd). */
+ bfd_close (sym_bfd); /* This also closes desc */
+ make_cleanup (free, name);
+ error ("\"%s\": can't read symbols: %s.", name,
+ bfd_errmsg (bfd_get_error ()));
+ }
+ return (sym_bfd);
}
-/* Link a new symtab_fns into the global symtab_fns list.
- Called by various _initialize routines. */
+/* Link a new symtab_fns into the global symtab_fns list. Called on gdb
+ startup by the _initialize routine in each object file format reader,
+ to register information about each format the the reader is prepared
+ to handle. */
void
add_symtab_fns (sf)
/* Initialize to read symbols from the symbol file sym_bfd. It either
- returns or calls error(). The result is a malloc'd struct sym_fns
- that contains cached information about the symbol file. */
+ returns or calls error(). The result is an initialized struct sym_fns
+ in the objfile structure, that contains cached information about the
+ symbol file. */
-static struct sym_fns *
-symfile_init (sym_bfd)
- bfd *sym_bfd;
+static void
+find_sym_fns (objfile)
+ struct objfile *objfile;
{
- struct sym_fns *sf, *sf2;
+ struct sym_fns *sf;
+ enum bfd_flavour our_flavour = bfd_get_flavour (objfile->obfd);
+ char *our_target = bfd_get_target (objfile->obfd);
+
+ /* Special kludge for RS/6000 and PowerMac. See xcoffread.c. */
+ if (STREQ (our_target, "aixcoff-rs6000") ||
+ STREQ (our_target, "xcoff-powermac"))
+ our_flavour = (enum bfd_flavour) -1;
+
+ /* Special kludge for apollo. See dstread.c. */
+ if (STREQN (our_target, "apollo", 6))
+ our_flavour = (enum bfd_flavour) -2;
for (sf = symtab_fns; sf != NULL; sf = sf->next)
{
- if (!strncmp (bfd_get_target (sym_bfd), sf->sym_name, sf->sym_namelen))
+ if (our_flavour == sf->sym_flavour)
{
- sf2 = (struct sym_fns *)xmalloc (sizeof (*sf2));
- /* FIXME, who frees this? */
- *sf2 = *sf;
- sf2->sym_bfd = sym_bfd;
- sf2->sym_private = 0; /* Not alloc'd yet */
- (*sf2->sym_init) (sf2);
- return sf2;
+ objfile->sf = sf;
+ return;
}
}
- error ("I'm sorry, Dave, I can't do that. Symbol format unknown.");
- return 0; /* Appease lint. */
+ error ("I'm sorry, Dave, I can't do that. Symbol format `%s' unknown.",
+ bfd_get_target (objfile->obfd));
}
\f
/* This function runs the load command of our current target. */
-void
+static void
load_command (arg, from_tty)
char *arg;
int from_tty;
{
+ if (arg == NULL)
+ arg = get_exec_file (1);
target_load (arg, from_tty);
}
+/* This version of "load" should be usable for any target. Currently
+ it is just used for remote targets, not inftarg.c or core files,
+ on the theory that only in that case is it useful.
+
+ Avoiding xmodem and the like seems like a win (a) because we don't have
+ to worry about finding it, and (b) On VMS, fork() is very slow and so
+ we don't want to run a subprocess. On the other hand, I'm not sure how
+ performance compares. */
+
+static int download_write_size = 512;
+static int validate_download = 0;
+
+void
+generic_load (char *args, int from_tty)
+{
+ asection *s;
+ bfd *loadfile_bfd;
+ time_t start_time, end_time; /* Start and end times of download */
+ unsigned long data_count = 0; /* Number of bytes transferred to memory */
+ unsigned long write_count = 0; /* Number of writes needed. */
+ unsigned long load_offset; /* offset to add to vma for each section */
+ char *filename;
+ struct cleanup *old_cleanups;
+ char *offptr;
+ CORE_ADDR total_size = 0;
+ CORE_ADDR total_sent = 0;
+
+ /* Parse the input argument - the user can specify a load offset as
+ a second argument. */
+ filename = xmalloc (strlen (args) + 1);
+ old_cleanups = make_cleanup (free, filename);
+ strcpy (filename, args);
+ offptr = strchr (filename, ' ');
+ if (offptr != NULL)
+ {
+ char *endptr;
+ load_offset = strtoul (offptr, &endptr, 0);
+ if (offptr == endptr)
+ error ("Invalid download offset:%s\n", offptr);
+ *offptr = '\0';
+ }
+ else
+ load_offset = 0;
+
+ /* Open the file for loading. */
+ loadfile_bfd = bfd_openr (filename, gnutarget);
+ if (loadfile_bfd == NULL)
+ {
+ perror_with_name (filename);
+ return;
+ }
+
+ /* FIXME: should be checking for errors from bfd_close (for one thing,
+ on error it does not free all the storage associated with the
+ bfd). */
+ make_cleanup ((make_cleanup_func) bfd_close, loadfile_bfd);
+
+ if (!bfd_check_format (loadfile_bfd, bfd_object))
+ {
+ error ("\"%s\" is not an object file: %s", filename,
+ bfd_errmsg (bfd_get_error ()));
+ }
+
+ for (s = loadfile_bfd->sections; s; s = s->next)
+ if (s->flags & SEC_LOAD)
+ total_size += bfd_get_section_size_before_reloc (s);
+
+ start_time = time (NULL);
+
+ for (s = loadfile_bfd->sections; s; s = s->next)
+ {
+ if (s->flags & SEC_LOAD)
+ {
+ CORE_ADDR size = bfd_get_section_size_before_reloc (s);
+ if (size > 0)
+ {
+ char *buffer;
+ struct cleanup *old_chain;
+ CORE_ADDR lma = s->lma + load_offset;
+ CORE_ADDR block_size;
+ int err;
+ const char *sect_name = bfd_get_section_name (loadfile_bfd, s);
+ CORE_ADDR sent;
+
+ if (download_write_size > 0 && size > download_write_size)
+ block_size = download_write_size;
+ else
+ block_size = size;
+
+ buffer = xmalloc (size);
+ old_chain = make_cleanup (free, buffer);
+
+ /* Is this really necessary? I guess it gives the user something
+ to look at during a long download. */
+#ifdef UI_OUT
+ ui_out_message (uiout, 0, "Loading section %s, size 0x%s lma 0x%s\n",
+ sect_name, paddr_nz (size), paddr_nz (lma));
+#else
+ fprintf_unfiltered (gdb_stdout,
+ "Loading section %s, size 0x%s lma 0x%s\n",
+ sect_name, paddr_nz (size), paddr_nz (lma));
+#endif
+
+ bfd_get_section_contents (loadfile_bfd, s, buffer, 0, size);
+
+ sent = 0;
+ do
+ {
+ CORE_ADDR len;
+ CORE_ADDR this_transfer = size - sent;
+ if (this_transfer >= block_size)
+ this_transfer = block_size;
+ len = target_write_memory_partial (lma, buffer,
+ this_transfer, &err);
+ if (err)
+ break;
+ if (validate_download)
+ {
+ /* Broken memories and broken monitors manifest
+ themselves here when bring new computers to
+ life. This doubles already slow downloads. */
+ /* NOTE: cagney/1999-10-18: A more efficient
+ implementation might add a verify_memory()
+ method to the target vector and then use
+ that. remote.c could implement that method
+ using the ``qCRC'' packet. */
+ char *check = xmalloc (len);
+ struct cleanup *verify_cleanups = make_cleanup (free, check);
+ if (target_read_memory (lma, check, len) != 0)
+ error ("Download verify read failed at 0x%s",
+ paddr (lma));
+ if (memcmp (buffer, check, len) != 0)
+ error ("Download verify compare failed at 0x%s",
+ paddr (lma));
+ do_cleanups (verify_cleanups);
+ }
+ data_count += len;
+ lma += len;
+ buffer += len;
+ write_count += 1;
+ sent += len;
+ total_sent += len;
+ if (quit_flag
+ || (ui_load_progress_hook != NULL
+ && ui_load_progress_hook (sect_name, sent)))
+ error ("Canceled the download");
+
+ if (show_load_progress != NULL)
+ show_load_progress (sect_name, sent, size, total_sent, total_size);
+ }
+ while (sent < size);
+
+ if (err != 0)
+ error ("Memory access error while loading section %s.", sect_name);
+
+ do_cleanups (old_chain);
+ }
+ }
+ }
+
+ end_time = time (NULL);
+ {
+ CORE_ADDR entry;
+ entry = bfd_get_start_address (loadfile_bfd);
+#ifdef UI_OUT
+ ui_out_text (uiout, "Start address ");
+ ui_out_field_fmt (uiout, "address", "0x%s" , paddr_nz (entry));
+ ui_out_text (uiout, ", load size ");
+ ui_out_field_fmt (uiout, "load-size", "%ld" , data_count);
+ ui_out_text (uiout, "\n");
+
+#else
+ fprintf_unfiltered (gdb_stdout,
+ "Start address 0x%s , load size %ld\n",
+ paddr_nz (entry), data_count);
+#endif
+ /* We were doing this in remote-mips.c, I suspect it is right
+ for other targets too. */
+ write_pc (entry);
+ }
+
+ /* FIXME: are we supposed to call symbol_file_add or not? According to
+ a comment from remote-mips.c (where a call to symbol_file_add was
+ commented out), making the call confuses GDB if more than one file is
+ loaded in. remote-nindy.c had no call to symbol_file_add, but remote-vx.c
+ does. */
+
+ print_transfer_performance (gdb_stdout, data_count, write_count,
+ end_time - start_time);
+
+ do_cleanups (old_cleanups);
+}
+
+/* Report how fast the transfer went. */
+
+/* DEPRECATED: cagney/1999-10-18: report_transfer_performance is being
+ replaced by print_transfer_performance (with a very different
+ function signature). */
+
+void
+report_transfer_performance (data_count, start_time, end_time)
+ unsigned long data_count;
+ time_t start_time, end_time;
+{
+ print_transfer_performance (gdb_stdout, data_count, end_time - start_time, 0);
+}
+
+void
+print_transfer_performance (struct ui_file *stream,
+ unsigned long data_count,
+ unsigned long write_count,
+ unsigned long time_count)
+{
+#ifdef UI_OUT
+ ui_out_text (uiout, "Transfer rate: ");
+ if (time_count > 0)
+ {
+ ui_out_field_fmt (uiout, "transfer-rate", "%ld",
+ (data_count * 8) / time_count);
+ ui_out_text (uiout, " bits/sec");
+ }
+ else
+ {
+ ui_out_field_fmt (uiout, "transferred-bits", "%ld", (data_count * 8));
+ ui_out_text (uiout, " bits in <1 sec");
+ }
+ if (write_count > 0)
+ {
+ ui_out_text (uiout, ", ");
+ ui_out_field_fmt (uiout, "write-rate", "%ld", data_count / write_count);
+ ui_out_text (uiout, " bytes/write");
+ }
+ ui_out_text (uiout, ".\n");
+#else
+ fprintf_unfiltered (stream, "Transfer rate: ");
+ if (time_count > 0)
+ fprintf_unfiltered (stream, "%ld bits/sec", (data_count * 8) / time_count);
+ else
+ fprintf_unfiltered (stream, "%ld bits in <1 sec", (data_count * 8));
+ if (write_count > 0)
+ fprintf_unfiltered (stream, ", %ld bytes/write", data_count / write_count);
+ fprintf_unfiltered (stream, ".\n");
+#endif
+}
+
/* This function allows the addition of incrementally linked object files.
It does not modify any state in the target, only in the debugger. */
/* ARGSUSED */
-void
-add_symbol_file_command (arg_string, from_tty)
- char *arg_string;
+static void
+add_symbol_file_command (args, from_tty)
+ char *args;
int from_tty;
{
- char *name;
+ char *name = NULL;
CORE_ADDR text_addr;
-
- /* Getting new symbols may change our opinion about what is
- frameless. */
- reinit_frame_cache ();
+ int flags = OBJF_USERLOADED;
+ char *arg;
+ int expecting_option = 0;
+ int option_index = 0;
+ int argcnt = 0;
+ int sec_num = 0;
+ int i;
+ struct
+ {
+ enum { OPT_SECTION } type;
+ char *name;
+ char *value;
+ } opt[SECT_OFF_MAX];
+ struct section_addr_info section_addrs;
+
+ dont_repeat ();
- if (arg_string == 0)
- error ("add-symbol-file takes a file name and an address");
+ if (args == NULL)
+ {
+ error ("add-symbol-file takes a file name and an address");
+ }
- arg_string = tilde_expand (arg_string);
- make_cleanup (free, arg_string);
+ /* Make a copy of the string that we can safely write into. */
- for( ; *arg_string == ' '; arg_string++ );
- name = arg_string;
- for( ; *arg_string && *arg_string != ' ' ; arg_string++ );
- *arg_string++ = (char) 0;
+ args = xstrdup (args);
+ make_cleanup (free, args);
- if (name[0] == 0)
- error ("add-symbol-file takes a file name and an address");
+ /* Ensure section_addrs is initialized */
+ memset (§ion_addrs, 0, sizeof (section_addrs));
- text_addr = parse_and_eval_address (arg_string);
+ /* Pick off any -option args and the file name. */
- dont_repeat ();
+ while (*args != '\000')
+ {
+ while (isspace (*args))
+ {
+ args++;
+ }
+ arg = args;
+ while ((*args != '\000') && !isspace (*args))
+ {
+ args++;
+ }
+ if (*args != '\000')
+ {
+ *args++ = '\000';
+ }
+ if (*arg != '-')
+ {
+ if (expecting_option)
+ {
+ opt[option_index++].value = arg;
+ expecting_option = 0;
+ }
+ else
+ {
+ switch (argcnt)
+ {
+ case 0:
+ name = arg;
+ break;
+ case 1:
+ opt[option_index].type = OPT_SECTION;
+ opt[option_index].name = ".text";
+ opt[option_index++].value = arg;
+ break;
+ case 2:
+ opt[option_index].type = OPT_SECTION;
+ opt[option_index].name = ".data";
+ opt[option_index++].value = arg;
+ break;
+ case 3:
+ opt[option_index].type = OPT_SECTION;
+ opt[option_index].name = ".bss";
+ opt[option_index++].value = arg;
+ break;
+ default:
+ warning ("Too many arguments entered; see \"help add-symbol-file\" for command syntax.");
+ }
+ argcnt++;
+ }
+ }
+ else if (STREQ (arg, "-mapped"))
+ {
+ flags |= OBJF_MAPPED;
+ }
+ else if (STREQ (arg, "-readnow"))
+ {
+ flags |= OBJF_READNOW;
+ }
+ else if (STREQN (arg, "-T", 2))
+ {
+ if (option_index >= SECT_OFF_MAX)
+ {
+ warning ("Number of options exceeds maximum allowed.");
+ }
+ else
+ {
+ expecting_option = 1;
+ opt[option_index].type = OPT_SECTION;
+ opt[option_index].name = arg + 2;
+ }
+ }
+ else
+ {
+ error ("Unknown option `%s'", arg);
+ }
+ }
- if (!query ("add symbol table from file \"%s\" at text_addr = 0x%x\n",
- name, text_addr))
+ if (name == NULL)
+ {
+ error ("add-symbol-file takes a file name");
+ }
+ name = tilde_expand (name);
+ make_cleanup (free, name);
+
+ if (option_index > 0)
+ {
+ /* Print the prompt for the query below.
+ We have to split this up into 3 print statements because
+ local_hex_string returns a local static string. */
+
+ printf_filtered ("add symbol table from file \"%s\" at\n", name);
+ for (i = 0; i < option_index; i++)
+ {
+ switch (opt[i].type)
+ {
+ case OPT_SECTION:
+ {
+ CORE_ADDR addr;
+ char *val = opt[i].value;
+ char *sec = opt[i].name;
+
+ val = opt[i].value;
+ if (val[0] == '0' && val[1] == 'x')
+ addr = strtoul (val+2, NULL, 16);
+ else
+ addr = strtoul (val, NULL, 10);
+
+ if (strcmp (sec, ".text") == 0)
+ section_addrs.text_addr = addr;
+ else if (strcmp (sec, ".data") == 0)
+ section_addrs.data_addr = addr;
+ else if (strcmp (sec, ".bss") == 0)
+ section_addrs.bss_addr = addr;
+ /* Add the section to the others even if it is a
+ text data or bss section. This is redundent but
+ eventually, none will be given special treatment */
+ {
+ section_addrs.other[sec_num].name = xstrdup (sec);
+ make_cleanup (free, section_addrs.other[sec_num].name);
+ section_addrs.other[sec_num++].addr = addr;
+ printf_filtered ("\t%s_addr = %s\n",
+ sec,
+ local_hex_string ((unsigned long)addr));
+ }
+
+ /* The object's sections are initialized when a
+ call is made to build_objfile_section_table (objfile).
+ This happens in reread_symbols.
+ At this point, we don't know what file type this is,
+ so we can't determine what section names are valid. */
+ }
+ break;
+ default:
+ complain (&unknown_option_complaint, opt[i].name);
+ }
+ }
+ /* Eventually, these hard coded names will be obsolete */
+ /* All the addresses will be on the others section */
+ }
+ else
+ {
+ CORE_ADDR text_addr;
+ target_link (name, &text_addr);
+ if (text_addr == (CORE_ADDR) -1)
+ error("Don't know how to get text start location for this file");
+ section_addrs.text_addr = text_addr;
+ section_addrs.data_addr = 0;
+ section_addrs.bss_addr = 0;
+ printf_filtered("add symbol table from file \"%s\" at text_addr = %s?\n",
+ name, local_hex_string ((unsigned long)text_addr));
+ }
+ if (from_tty && (!query ("%s", "")))
error ("Not confirmed.");
- symbol_file_add (name, 0, text_addr, 0);
+ symbol_file_add (name, from_tty, §ion_addrs, 0, flags);
+
+ /* Getting new symbols may change our opinion about what is
+ frameless. */
+ reinit_frame_cache ();
+}
+\f
+static void
+add_shared_symbol_files_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+#ifdef ADD_SHARED_SYMBOL_FILES
+ ADD_SHARED_SYMBOL_FILES (args, from_tty);
+#else
+ error ("This command is not available in this configuration of GDB.");
+#endif
}
\f
-/* Re-read symbols if the symbol-file has changed. */
+/* Re-read symbols if a symbol-file has changed. */
void
reread_symbols ()
{
- struct stat symstat;
+ struct objfile *objfile;
+ long new_modtime;
+ int reread_one = 0;
+ struct stat new_statbuf;
+ int res;
/* With the addition of shared libraries, this should be modified,
the load time should be saved in the partial symbol tables, since
different tables may come from different source files. FIXME.
This routine should then walk down each partial symbol table
- and see if the symbol table that it originates from has been changed
- */
-
- if (stat (symfile, &symstat) < 0)
- /* Can't read symbol-file. Assume it is up to date. */
- return;
-
- if (symstat.st_mtime > symfile_mtime)
- {
- printf_filtered ("Symbol file has changed; re-reading symbols.\n");
- symbol_file_command (symfile, 0);
- breakpoint_re_set ();
- }
-}
+ and see if the symbol table that it originates from has been changed */
-/* This function is really horrible, but to avoid it, there would need
- to be more filling in of forward references. */
-void
-fill_in_vptr_fieldno (type)
- struct type *type;
-{
- if (TYPE_VPTR_FIELDNO (type) < 0)
+ for (objfile = object_files; objfile; objfile = objfile->next)
{
- int i;
- for (i = 1; i < TYPE_N_BASECLASSES (type); i++)
+ if (objfile->obfd)
{
- fill_in_vptr_fieldno (TYPE_BASECLASS (type, i));
- if (TYPE_VPTR_FIELDNO (TYPE_BASECLASS (type, i)) >= 0)
+#ifdef IBM6000_TARGET
+ /* If this object is from a shared library, then you should
+ stat on the library name, not member name. */
+
+ if (objfile->obfd->my_archive)
+ res = stat (objfile->obfd->my_archive->filename, &new_statbuf);
+ else
+#endif
+ res = stat (objfile->name, &new_statbuf);
+ if (res != 0)
{
- TYPE_VPTR_FIELDNO (type)
- = TYPE_VPTR_FIELDNO (TYPE_BASECLASS (type, i));
- TYPE_VPTR_BASETYPE (type)
- = TYPE_VPTR_BASETYPE (TYPE_BASECLASS (type, i));
- break;
+ /* FIXME, should use print_sys_errmsg but it's not filtered. */
+ printf_filtered ("`%s' has disappeared; keeping its symbols.\n",
+ objfile->name);
+ continue;
+ }
+ new_modtime = new_statbuf.st_mtime;
+ if (new_modtime != objfile->mtime)
+ {
+ struct cleanup *old_cleanups;
+ struct section_offsets *offsets;
+ int num_offsets;
+ char *obfd_filename;
+
+ printf_filtered ("`%s' has changed; re-reading symbols.\n",
+ objfile->name);
+
+ /* There are various functions like symbol_file_add,
+ symfile_bfd_open, syms_from_objfile, etc., which might
+ appear to do what we want. But they have various other
+ effects which we *don't* want. So we just do stuff
+ ourselves. We don't worry about mapped files (for one thing,
+ any mapped file will be out of date). */
+
+ /* If we get an error, blow away this objfile (not sure if
+ that is the correct response for things like shared
+ libraries). */
+ old_cleanups = make_cleanup ((make_cleanup_func) free_objfile,
+ objfile);
+ /* We need to do this whenever any symbols go away. */
+ make_cleanup ((make_cleanup_func) clear_symtab_users, 0);
+
+ /* Clean up any state BFD has sitting around. We don't need
+ to close the descriptor but BFD lacks a way of closing the
+ BFD without closing the descriptor. */
+ obfd_filename = bfd_get_filename (objfile->obfd);
+ if (!bfd_close (objfile->obfd))
+ error ("Can't close BFD for %s: %s", objfile->name,
+ bfd_errmsg (bfd_get_error ()));
+ objfile->obfd = bfd_openr (obfd_filename, gnutarget);
+ if (objfile->obfd == NULL)
+ error ("Can't open %s to read symbols.", objfile->name);
+ /* bfd_openr sets cacheable to true, which is what we want. */
+ if (!bfd_check_format (objfile->obfd, bfd_object))
+ error ("Can't read symbols from %s: %s.", objfile->name,
+ bfd_errmsg (bfd_get_error ()));
+
+ /* Save the offsets, we will nuke them with the rest of the
+ psymbol_obstack. */
+ num_offsets = objfile->num_sections;
+ offsets = (struct section_offsets *) alloca (SIZEOF_SECTION_OFFSETS);
+ memcpy (offsets, objfile->section_offsets, SIZEOF_SECTION_OFFSETS);
+
+ /* Nuke all the state that we will re-read. Much of the following
+ code which sets things to NULL really is necessary to tell
+ other parts of GDB that there is nothing currently there. */
+
+ /* FIXME: Do we have to free a whole linked list, or is this
+ enough? */
+ if (objfile->global_psymbols.list)
+ mfree (objfile->md, objfile->global_psymbols.list);
+ memset (&objfile->global_psymbols, 0,
+ sizeof (objfile->global_psymbols));
+ if (objfile->static_psymbols.list)
+ mfree (objfile->md, objfile->static_psymbols.list);
+ memset (&objfile->static_psymbols, 0,
+ sizeof (objfile->static_psymbols));
+
+ /* Free the obstacks for non-reusable objfiles */
+ free_bcache (&objfile->psymbol_cache);
+ obstack_free (&objfile->psymbol_obstack, 0);
+ obstack_free (&objfile->symbol_obstack, 0);
+ obstack_free (&objfile->type_obstack, 0);
+ objfile->sections = NULL;
+ objfile->symtabs = NULL;
+ objfile->psymtabs = NULL;
+ objfile->free_psymtabs = NULL;
+ objfile->msymbols = NULL;
+ objfile->minimal_symbol_count = 0;
+ objfile->fundamental_types = NULL;
+ if (objfile->sf != NULL)
+ {
+ (*objfile->sf->sym_finish) (objfile);
+ }
+
+ /* We never make this a mapped file. */
+ objfile->md = NULL;
+ /* obstack_specify_allocation also initializes the obstack so
+ it is empty. */
+ obstack_specify_allocation (&objfile->psymbol_cache.cache, 0, 0,
+ xmalloc, free);
+ obstack_specify_allocation (&objfile->psymbol_obstack, 0, 0,
+ xmalloc, free);
+ obstack_specify_allocation (&objfile->symbol_obstack, 0, 0,
+ xmalloc, free);
+ obstack_specify_allocation (&objfile->type_obstack, 0, 0,
+ xmalloc, free);
+ if (build_objfile_section_table (objfile))
+ {
+ error ("Can't find the file sections in `%s': %s",
+ objfile->name, bfd_errmsg (bfd_get_error ()));
+ }
+
+ /* We use the same section offsets as from last time. I'm not
+ sure whether that is always correct for shared libraries. */
+ objfile->section_offsets = (struct section_offsets *)
+ obstack_alloc (&objfile->psymbol_obstack, SIZEOF_SECTION_OFFSETS);
+ memcpy (objfile->section_offsets, offsets, SIZEOF_SECTION_OFFSETS);
+ objfile->num_sections = num_offsets;
+
+ /* What the hell is sym_new_init for, anyway? The concept of
+ distinguishing between the main file and additional files
+ in this way seems rather dubious. */
+ if (objfile == symfile_objfile)
+ {
+ (*objfile->sf->sym_new_init) (objfile);
+#ifdef HPUXHPPA
+ RESET_HP_UX_GLOBALS ();
+#endif
+ }
+
+ (*objfile->sf->sym_init) (objfile);
+ clear_complaints (1, 1);
+ /* The "mainline" parameter is a hideous hack; I think leaving it
+ zero is OK since dbxread.c also does what it needs to do if
+ objfile->global_psymbols.size is 0. */
+ (*objfile->sf->sym_read) (objfile, 0);
+ if (!have_partial_symbols () && !have_full_symbols ())
+ {
+ wrap_here ("");
+ printf_filtered ("(no debugging symbols found)\n");
+ wrap_here ("");
+ }
+ objfile->flags |= OBJF_SYMS;
+
+ /* We're done reading the symbol file; finish off complaints. */
+ clear_complaints (0, 1);
+
+ /* Getting new symbols may change our opinion about what is
+ frameless. */
+
+ reinit_frame_cache ();
+
+ /* Discard cleanups as symbol reading was successful. */
+ discard_cleanups (old_cleanups);
+
+ /* If the mtime has changed between the time we set new_modtime
+ and now, we *want* this to be out of date, so don't call stat
+ again now. */
+ objfile->mtime = new_modtime;
+ reread_one = 1;
+
+ /* Call this after reading in a new symbol table to give target
+ dependant code a crack at the new symbols. For instance, this
+ could be used to update the values of target-specific symbols GDB
+ needs to keep track of (such as _sigtramp, or whatever). */
+
+ TARGET_SYMFILE_POSTREAD (objfile);
}
}
}
+
+ if (reread_one)
+ clear_symtab_users ();
}
\f
-/* Functions to handle complaints during symbol reading. */
-/* How many complaints about a particular thing should be printed before
- we stop whining about it? Default is no whining at all, since so many
- systems have ill-constructed symbol files. */
-static unsigned stop_whining = 0;
-
-/* Print a complaint about the input symbols, and link the complaint block
- into a chain for later handling. Result is 1 if the complaint was
- printed, 0 if it was suppressed. */
-
-int
-complain (complaint, val)
- struct complaint *complaint;
- char *val;
-{
- complaint->counter++;
- if (complaint->next == 0) {
- complaint->next = complaint_root->next;
- complaint_root->next = complaint;
- }
- if (complaint->counter > stop_whining)
- return 0;
- wrap_here ("");
- if (!info_verbose) {
- puts_filtered ("During symbol reading...");
- }
- printf_filtered (complaint->message, val);
- puts_filtered ("...");
- wrap_here("");
- if (!info_verbose)
- puts_filtered ("\n");
- return 1;
+typedef struct
+{
+ char *ext;
+ enum language lang;
}
+filename_language;
-/* Clear out all complaint counters that have ever been incremented. */
+static filename_language *filename_language_table;
+static int fl_table_size, fl_table_next;
-void
-clear_complaints ()
+static void
+add_filename_language (ext, lang)
+ char *ext;
+ enum language lang;
{
- struct complaint *p;
+ if (fl_table_next >= fl_table_size)
+ {
+ fl_table_size += 10;
+ filename_language_table = realloc (filename_language_table,
+ fl_table_size);
+ }
- for (p = complaint_root->next; p != complaint_root; p = p->next)
- p->counter = 0;
+ filename_language_table[fl_table_next].ext = strsave (ext);
+ filename_language_table[fl_table_next].lang = lang;
+ fl_table_next++;
}
-\f
-/* clear_symtab_users_once:
- This function is run after symbol reading, or from a cleanup.
- If an old symbol table was obsoleted, the old symbol table
- has been blown away, but the other GDB data structures that may
- reference it have not yet been cleared or re-directed. (The old
- symtab was zapped, and the cleanup queued, in free_named_symtab()
- below.)
+static char *ext_args;
- This function can be queued N times as a cleanup, or called
- directly; it will do all the work the first time, and then will be a
- no-op until the next time it is queued. This works by bumping a
- counter at queueing time. Much later when the cleanup is run, or at
- the end of symbol processing (in case the cleanup is discarded), if
- the queued count is greater than the "done-count", we do the work
- and set the done-count to the queued count. If the queued count is
- less than or equal to the done-count, we just ignore the call. This
- is needed because reading a single .o file will often replace many
- symtabs (one per .h file, for example), and we don't want to reset
- the breakpoints N times in the user's face.
+static void
+set_ext_lang_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ int i;
+ char *cp = ext_args;
+ enum language lang;
- The reason we both queue a cleanup, and call it directly after symbol
- reading, is because the cleanup protects us in case of errors, but is
- discarded if symbol reading is successful. */
+ /* First arg is filename extension, starting with '.' */
+ if (*cp != '.')
+ error ("'%s': Filename extension must begin with '.'", ext_args);
-static int clear_symtab_users_queued;
-static int clear_symtab_users_done;
+ /* Find end of first arg. */
+ while (*cp && !isspace (*cp))
+ cp++;
-static void
-clear_symtab_users_once ()
-{
- /* Enforce once-per-`do_cleanups'-semantics */
- if (clear_symtab_users_queued <= clear_symtab_users_done)
- return;
- clear_symtab_users_done = clear_symtab_users_queued;
+ if (*cp == '\0')
+ error ("'%s': two arguments required -- filename extension and language",
+ ext_args);
- printf ("Resetting debugger state after updating old symbol tables\n");
+ /* Null-terminate first arg */
+ *cp++ = '\0';
- /* Someday, we should do better than this, by only blowing away
- the things that really need to be blown. */
- clear_value_history ();
- clear_displays ();
- clear_internalvars ();
- breakpoint_re_set ();
- set_default_breakpoint (0, 0, 0, 0);
- current_source_symtab = 0;
-}
+ /* Find beginning of second arg, which should be a source language. */
+ while (*cp && isspace (*cp))
+ cp++;
-/* Delete the specified psymtab, and any others that reference it. */
+ if (*cp == '\0')
+ error ("'%s': two arguments required -- filename extension and language",
+ ext_args);
-static void
-cashier_psymtab (pst)
- struct partial_symtab *pst;
-{
- struct partial_symtab *ps, *pprev;
- int i;
+ /* Lookup the language from among those we know. */
+ lang = language_enum (cp);
- /* Find its previous psymtab in the chain */
- for (ps = partial_symtab_list; ps; ps = ps->next) {
- if (ps == pst)
+ /* Now lookup the filename extension: do we already know it? */
+ for (i = 0; i < fl_table_next; i++)
+ if (0 == strcmp (ext_args, filename_language_table[i].ext))
break;
- pprev = ps;
- }
- if (ps) {
- /* Unhook it from the chain. */
- if (ps == partial_symtab_list)
- partial_symtab_list = ps->next;
- else
- pprev->next = ps->next;
-
- /* FIXME, we can't conveniently deallocate the entries in the
- partial_symbol lists (global_psymbols/static_psymbols) that
- this psymtab points to. These just take up space until all
- the psymtabs are reclaimed. Ditto the dependencies list and
- filename, which are all in the psymbol_obstack. */
-
- /* We need to cashier any psymtab that has this one as a dependency... */
-again:
- for (ps = partial_symtab_list; ps; ps = ps->next) {
- for (i = 0; i < ps->number_of_dependencies; i++) {
- if (ps->dependencies[i] == pst) {
- cashier_psymtab (ps);
- goto again; /* Must restart, chain has been munged. */
- }
- }
+ if (i >= fl_table_next)
+ {
+ /* new file extension */
+ add_filename_language (ext_args, lang);
+ }
+ else
+ {
+ /* redefining a previously known filename extension */
+
+ /* if (from_tty) */
+ /* query ("Really make files of type %s '%s'?", */
+ /* ext_args, language_str (lang)); */
+
+ free (filename_language_table[i].ext);
+ filename_language_table[i].ext = strsave (ext_args);
+ filename_language_table[i].lang = lang;
+ }
+}
+
+static void
+info_ext_lang_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ int i;
+
+ printf_filtered ("Filename extensions and the languages they represent:");
+ printf_filtered ("\n\n");
+ for (i = 0; i < fl_table_next; i++)
+ printf_filtered ("\t%s\t- %s\n",
+ filename_language_table[i].ext,
+ language_str (filename_language_table[i].lang));
+}
+
+static void
+init_filename_language_table ()
+{
+ if (fl_table_size == 0) /* protect against repetition */
+ {
+ fl_table_size = 20;
+ fl_table_next = 0;
+ filename_language_table =
+ xmalloc (fl_table_size * sizeof (*filename_language_table));
+ add_filename_language (".c", language_c);
+ add_filename_language (".C", language_cplus);
+ add_filename_language (".cc", language_cplus);
+ add_filename_language (".cp", language_cplus);
+ add_filename_language (".cpp", language_cplus);
+ add_filename_language (".cxx", language_cplus);
+ add_filename_language (".c++", language_cplus);
+ add_filename_language (".java", language_java);
+ add_filename_language (".class", language_java);
+ add_filename_language (".ch", language_chill);
+ add_filename_language (".c186", language_chill);
+ add_filename_language (".c286", language_chill);
+ add_filename_language (".f", language_fortran);
+ add_filename_language (".F", language_fortran);
+ add_filename_language (".s", language_asm);
+ add_filename_language (".S", language_asm);
+ }
+}
+
+enum language
+deduce_language_from_filename (filename)
+ char *filename;
+{
+ int i;
+ char *cp;
+
+ if (filename != NULL)
+ if ((cp = strrchr (filename, '.')) != NULL)
+ for (i = 0; i < fl_table_next; i++)
+ if (strcmp (cp, filename_language_table[i].ext) == 0)
+ return filename_language_table[i].lang;
+
+ return language_unknown;
+}
+\f
+/* allocate_symtab:
+
+ Allocate and partly initialize a new symbol table. Return a pointer
+ to it. error() if no space.
+
+ Caller must set these fields:
+ LINETABLE(symtab)
+ symtab->blockvector
+ symtab->dirname
+ symtab->free_code
+ symtab->free_ptr
+ possibly free_named_symtabs (symtab->filename);
+ */
+
+struct symtab *
+allocate_symtab (filename, objfile)
+ char *filename;
+ struct objfile *objfile;
+{
+ register struct symtab *symtab;
+
+ symtab = (struct symtab *)
+ obstack_alloc (&objfile->symbol_obstack, sizeof (struct symtab));
+ memset (symtab, 0, sizeof (*symtab));
+ symtab->filename = obsavestring (filename, strlen (filename),
+ &objfile->symbol_obstack);
+ symtab->fullname = NULL;
+ symtab->language = deduce_language_from_filename (filename);
+ symtab->debugformat = obsavestring ("unknown", 7,
+ &objfile->symbol_obstack);
+
+ /* Hook it to the objfile it comes from */
+
+ symtab->objfile = objfile;
+ symtab->next = objfile->symtabs;
+ objfile->symtabs = symtab;
+
+ /* FIXME: This should go away. It is only defined for the Z8000,
+ and the Z8000 definition of this macro doesn't have anything to
+ do with the now-nonexistent EXTRA_SYMTAB_INFO macro, it's just
+ here for convenience. */
+#ifdef INIT_EXTRA_SYMTAB_INFO
+ INIT_EXTRA_SYMTAB_INFO (symtab);
+#endif
+
+ return (symtab);
+}
+
+struct partial_symtab *
+allocate_psymtab (filename, objfile)
+ char *filename;
+ struct objfile *objfile;
+{
+ struct partial_symtab *psymtab;
+
+ if (objfile->free_psymtabs)
+ {
+ psymtab = objfile->free_psymtabs;
+ objfile->free_psymtabs = psymtab->next;
+ }
+ else
+ psymtab = (struct partial_symtab *)
+ obstack_alloc (&objfile->psymbol_obstack,
+ sizeof (struct partial_symtab));
+
+ memset (psymtab, 0, sizeof (struct partial_symtab));
+ psymtab->filename = obsavestring (filename, strlen (filename),
+ &objfile->psymbol_obstack);
+ psymtab->symtab = NULL;
+
+ /* Prepend it to the psymtab list for the objfile it belongs to.
+ Psymtabs are searched in most recent inserted -> least recent
+ inserted order. */
+
+ psymtab->objfile = objfile;
+ psymtab->next = objfile->psymtabs;
+ objfile->psymtabs = psymtab;
+#if 0
+ {
+ struct partial_symtab **prev_pst;
+ psymtab->objfile = objfile;
+ psymtab->next = NULL;
+ prev_pst = &(objfile->psymtabs);
+ while ((*prev_pst) != NULL)
+ prev_pst = &((*prev_pst)->next);
+ (*prev_pst) = psymtab;
+ }
+#endif
+
+ return (psymtab);
+}
+
+void
+discard_psymtab (pst)
+ struct partial_symtab *pst;
+{
+ struct partial_symtab **prev_pst;
+
+ /* From dbxread.c:
+ Empty psymtabs happen as a result of header files which don't
+ have any symbols in them. There can be a lot of them. But this
+ check is wrong, in that a psymtab with N_SLINE entries but
+ nothing else is not empty, but we don't realize that. Fixing
+ that without slowing things down might be tricky. */
+
+ /* First, snip it out of the psymtab chain */
+
+ prev_pst = &(pst->objfile->psymtabs);
+ while ((*prev_pst) != pst)
+ prev_pst = &((*prev_pst)->next);
+ (*prev_pst) = pst->next;
+
+ /* Next, put it on a free list for recycling */
+
+ pst->next = pst->objfile->free_psymtabs;
+ pst->objfile->free_psymtabs = pst;
+}
+\f
+
+/* Reset all data structures in gdb which may contain references to symbol
+ table data. */
+
+void
+clear_symtab_users ()
+{
+ /* Someday, we should do better than this, by only blowing away
+ the things that really need to be blown. */
+ clear_value_history ();
+ clear_displays ();
+ clear_internalvars ();
+ breakpoint_re_set ();
+ set_default_breakpoint (0, 0, 0, 0);
+ current_source_symtab = 0;
+ current_source_line = 0;
+ clear_pc_function_cache ();
+ if (target_new_objfile_hook)
+ target_new_objfile_hook (NULL);
+}
+
+/* clear_symtab_users_once:
+
+ This function is run after symbol reading, or from a cleanup.
+ If an old symbol table was obsoleted, the old symbol table
+ has been blown away, but the other GDB data structures that may
+ reference it have not yet been cleared or re-directed. (The old
+ symtab was zapped, and the cleanup queued, in free_named_symtab()
+ below.)
+
+ This function can be queued N times as a cleanup, or called
+ directly; it will do all the work the first time, and then will be a
+ no-op until the next time it is queued. This works by bumping a
+ counter at queueing time. Much later when the cleanup is run, or at
+ the end of symbol processing (in case the cleanup is discarded), if
+ the queued count is greater than the "done-count", we do the work
+ and set the done-count to the queued count. If the queued count is
+ less than or equal to the done-count, we just ignore the call. This
+ is needed because reading a single .o file will often replace many
+ symtabs (one per .h file, for example), and we don't want to reset
+ the breakpoints N times in the user's face.
+
+ The reason we both queue a cleanup, and call it directly after symbol
+ reading, is because the cleanup protects us in case of errors, but is
+ discarded if symbol reading is successful. */
+
+#if 0
+/* FIXME: As free_named_symtabs is currently a big noop this function
+ is no longer needed. */
+static void
+clear_symtab_users_once PARAMS ((void));
+
+static int clear_symtab_users_queued;
+static int clear_symtab_users_done;
+
+static void
+clear_symtab_users_once ()
+{
+ /* Enforce once-per-`do_cleanups'-semantics */
+ if (clear_symtab_users_queued <= clear_symtab_users_done)
+ return;
+ clear_symtab_users_done = clear_symtab_users_queued;
+
+ clear_symtab_users ();
+}
+#endif
+
+/* Delete the specified psymtab, and any others that reference it. */
+
+static void
+cashier_psymtab (pst)
+ struct partial_symtab *pst;
+{
+ struct partial_symtab *ps, *pprev = NULL;
+ int i;
+
+ /* Find its previous psymtab in the chain */
+ for (ps = pst->objfile->psymtabs; ps; ps = ps->next)
+ {
+ if (ps == pst)
+ break;
+ pprev = ps;
+ }
+
+ if (ps)
+ {
+ /* Unhook it from the chain. */
+ if (ps == pst->objfile->psymtabs)
+ pst->objfile->psymtabs = ps->next;
+ else
+ pprev->next = ps->next;
+
+ /* FIXME, we can't conveniently deallocate the entries in the
+ partial_symbol lists (global_psymbols/static_psymbols) that
+ this psymtab points to. These just take up space until all
+ the psymtabs are reclaimed. Ditto the dependencies list and
+ filename, which are all in the psymbol_obstack. */
+
+ /* We need to cashier any psymtab that has this one as a dependency... */
+ again:
+ for (ps = pst->objfile->psymtabs; ps; ps = ps->next)
+ {
+ for (i = 0; i < ps->number_of_dependencies; i++)
+ {
+ if (ps->dependencies[i] == pst)
+ {
+ cashier_psymtab (ps);
+ goto again; /* Must restart, chain has been munged. */
+ }
+ }
+ }
}
- }
}
/* If a symtab or psymtab for filename NAME is found, free it along
it is not called for subsidiary files such as .h files.
Return value is 1 if we blew away the environment, 0 if not.
+ FIXME. The return valu appears to never be used.
FIXME. I think this is not the best way to do this. We should
work on being gentler to the environment while still cleaning up
free_named_symtabs (name)
char *name;
{
+#if 0
+ /* FIXME: With the new method of each objfile having it's own
+ psymtab list, this function needs serious rethinking. In particular,
+ why was it ever necessary to toss psymtabs with specific compilation
+ unit filenames, as opposed to all psymtabs from a particular symbol
+ file? -- fnf
+ Well, the answer is that some systems permit reloading of particular
+ compilation units. We want to blow away any old info about these
+ compilation units, regardless of which objfiles they arrived in. --gnu. */
+
register struct symtab *s;
register struct symtab *prev;
register struct partial_symtab *ps;
/* Look for a psymtab with the specified name. */
again2:
- for (ps = partial_symtab_list; ps; ps = ps->next) {
- if (!strcmp (name, ps->filename)) {
- cashier_psymtab (ps); /* Blow it away...and its little dog, too. */
- goto again2; /* Must restart, chain has been munged */
+ for (ps = partial_symtab_list; ps; ps = ps->next)
+ {
+ if (STREQ (name, ps->filename))
+ {
+ cashier_psymtab (ps); /* Blow it away...and its little dog, too. */
+ goto again2; /* Must restart, chain has been munged */
+ }
}
- }
/* Look for a symtab with the specified name. */
for (s = symtab_list; s; s = s->next)
{
- if (!strcmp (name, s->filename))
+ if (STREQ (name, s->filename))
break;
prev = s;
}
prev->next = s->next;
/* For now, queue a delete for all breakpoints, displays, etc., whether
- or not they depend on the symtab being freed. This should be
- changed so that only those data structures affected are deleted. */
+ or not they depend on the symtab being freed. This should be
+ changed so that only those data structures affected are deleted. */
/* But don't delete anything if the symtab is empty.
- This test is necessary due to a bug in "dbxread.c" that
- causes empty symtabs to be created for N_SO symbols that
- contain the pathname of the object file. (This problem
- has been fixed in GDB 3.9x). */
+ This test is necessary due to a bug in "dbxread.c" that
+ causes empty symtabs to be created for N_SO symbols that
+ contain the pathname of the object file. (This problem
+ has been fixed in GDB 3.9x). */
- bv = BLOCKLIST (s);
- if (BLOCKLIST_NBLOCKS (bv) > 2
+ bv = BLOCKVECTOR (s);
+ if (BLOCKVECTOR_NBLOCKS (bv) > 2
|| BLOCK_NSYMS (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK))
|| BLOCK_NSYMS (BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK)))
{
clear_symtab_users_queued++;
make_cleanup (clear_symtab_users_once, 0);
blewit = 1;
- } else {
+ }
+ else
+ {
complain (&empty_symtab_complaint, name);
}
free_symtab (s);
}
else
- /* It is still possible that some breakpoints will be affected
- even though no symtab was found, since the file might have
- been compiled without debugging, and hence not be associated
- with a symtab. In order to handle this correctly, we would need
- to keep a list of text address ranges for undebuggable files.
- For now, we do nothing, since this is a fairly obscure case. */
- ;
-
- /* FIXME, what about the misc function vector? */
+ {
+ /* It is still possible that some breakpoints will be affected
+ even though no symtab was found, since the file might have
+ been compiled without debugging, and hence not be associated
+ with a symtab. In order to handle this correctly, we would need
+ to keep a list of text address ranges for undebuggable files.
+ For now, we do nothing, since this is a fairly obscure case. */
+ ;
+ }
+
+ /* FIXME, what about the minimal symbol table? */
return blewit;
+#else
+ return (0);
+#endif
+}
+\f
+/* Allocate and partially fill a partial symtab. It will be
+ completely filled at the end of the symbol list.
+
+ FILENAME is the name of the symbol-file we are reading from. */
+
+struct partial_symtab *
+start_psymtab_common (objfile, section_offsets,
+ filename, textlow, global_syms, static_syms)
+ struct objfile *objfile;
+ struct section_offsets *section_offsets;
+ char *filename;
+ CORE_ADDR textlow;
+ struct partial_symbol **global_syms;
+ struct partial_symbol **static_syms;
+{
+ struct partial_symtab *psymtab;
+
+ psymtab = allocate_psymtab (filename, objfile);
+ psymtab->section_offsets = section_offsets;
+ psymtab->textlow = textlow;
+ psymtab->texthigh = psymtab->textlow; /* default */
+ psymtab->globals_offset = global_syms - objfile->global_psymbols.list;
+ psymtab->statics_offset = static_syms - objfile->static_psymbols.list;
+ return (psymtab);
}
\f
+/* Add a symbol with a long value to a psymtab.
+ Since one arg is a struct, we pass in a ptr and deref it (sigh). */
+
void
-_initialize_symfile ()
+add_psymbol_to_list (name, namelength, namespace, class, list, val, coreaddr,
+ language, objfile)
+ char *name;
+ int namelength;
+ namespace_enum namespace;
+ enum address_class class;
+ struct psymbol_allocation_list *list;
+ long val; /* Value as a long */
+ CORE_ADDR coreaddr; /* Value as a CORE_ADDR */
+ enum language language;
+ struct objfile *objfile;
{
+ register struct partial_symbol *psym;
+ char *buf = alloca (namelength + 1);
+ /* psymbol is static so that there will be no uninitialized gaps in the
+ structure which might contain random data, causing cache misses in
+ bcache. */
+ static struct partial_symbol psymbol;
+
+ /* Create local copy of the partial symbol */
+ memcpy (buf, name, namelength);
+ buf[namelength] = '\0';
+ SYMBOL_NAME (&psymbol) = bcache (buf, namelength + 1, &objfile->psymbol_cache);
+ /* val and coreaddr are mutually exclusive, one of them *will* be zero */
+ if (val != 0)
+ {
+ SYMBOL_VALUE (&psymbol) = val;
+ }
+ else
+ {
+ SYMBOL_VALUE_ADDRESS (&psymbol) = coreaddr;
+ }
+ SYMBOL_SECTION (&psymbol) = 0;
+ SYMBOL_LANGUAGE (&psymbol) = language;
+ PSYMBOL_NAMESPACE (&psymbol) = namespace;
+ PSYMBOL_CLASS (&psymbol) = class;
+ SYMBOL_INIT_LANGUAGE_SPECIFIC (&psymbol, language);
- add_com ("symbol-file", class_files, symbol_file_command,
- "Load symbol table from executable file FILE.\n\
-The `file' command can also load symbol tables, as well as setting the file\n\
-to execute.");
+ /* Stash the partial symbol away in the cache */
+ psym = bcache (&psymbol, sizeof (struct partial_symbol), &objfile->psymbol_cache);
+
+ /* Save pointer to partial symbol in psymtab, growing symtab if needed. */
+ if (list->next >= list->list + list->size)
+ {
+ extend_psymbol_list (list, objfile);
+ }
+ *list->next++ = psym;
+ OBJSTAT (objfile, n_psyms++);
+}
- add_com ("add-symbol-file", class_files, add_symbol_file_command,
- "Load the symbols from FILE, assuming FILE has been dynamically loaded.\n\
-The second argument provides the starting address of the file's text.");
+/* Add a symbol with a long value to a psymtab. This differs from
+ * add_psymbol_to_list above in taking both a mangled and a demangled
+ * name. */
- add_com ("load", class_files, load_command,
- "Dynamically load FILE into the running program, and record its symbols\n\
-for access from GDB.");
+void
+add_psymbol_with_dem_name_to_list (name, namelength, dem_name, dem_namelength,
+ namespace, class, list, val, coreaddr, language, objfile)
+ char *name;
+ int namelength;
+ char *dem_name;
+ int dem_namelength;
+ namespace_enum namespace;
+ enum address_class class;
+ struct psymbol_allocation_list *list;
+ long val; /* Value as a long */
+ CORE_ADDR coreaddr; /* Value as a CORE_ADDR */
+ enum language language;
+ struct objfile *objfile;
+{
+ register struct partial_symbol *psym;
+ char *buf = alloca (namelength + 1);
+ /* psymbol is static so that there will be no uninitialized gaps in the
+ structure which might contain random data, causing cache misses in
+ bcache. */
+ static struct partial_symbol psymbol;
+
+ /* Create local copy of the partial symbol */
+
+ memcpy (buf, name, namelength);
+ buf[namelength] = '\0';
+ SYMBOL_NAME (&psymbol) = bcache (buf, namelength + 1, &objfile->psymbol_cache);
+
+ buf = alloca (dem_namelength + 1);
+ memcpy (buf, dem_name, dem_namelength);
+ buf[dem_namelength] = '\0';
+
+ switch (language)
+ {
+ case language_c:
+ case language_cplus:
+ SYMBOL_CPLUS_DEMANGLED_NAME (&psymbol) =
+ bcache (buf, dem_namelength + 1, &objfile->psymbol_cache);
+ break;
+ case language_chill:
+ SYMBOL_CHILL_DEMANGLED_NAME (&psymbol) =
+ bcache (buf, dem_namelength + 1, &objfile->psymbol_cache);
+
+ /* FIXME What should be done for the default case? Ignoring for now. */
+ }
+
+ /* val and coreaddr are mutually exclusive, one of them *will* be zero */
+ if (val != 0)
+ {
+ SYMBOL_VALUE (&psymbol) = val;
+ }
+ else
+ {
+ SYMBOL_VALUE_ADDRESS (&psymbol) = coreaddr;
+ }
+ SYMBOL_SECTION (&psymbol) = 0;
+ SYMBOL_LANGUAGE (&psymbol) = language;
+ PSYMBOL_NAMESPACE (&psymbol) = namespace;
+ PSYMBOL_CLASS (&psymbol) = class;
+ SYMBOL_INIT_LANGUAGE_SPECIFIC (&psymbol, language);
+
+ /* Stash the partial symbol away in the cache */
+ psym = bcache (&psymbol, sizeof (struct partial_symbol), &objfile->psymbol_cache);
+
+ /* Save pointer to partial symbol in psymtab, growing symtab if needed. */
+ if (list->next >= list->list + list->size)
+ {
+ extend_psymbol_list (list, objfile);
+ }
+ *list->next++ = psym;
+ OBJSTAT (objfile, n_psyms++);
+}
+
+/* Initialize storage for partial symbols. */
+
+void
+init_psymbol_list (objfile, total_symbols)
+ struct objfile *objfile;
+ int total_symbols;
+{
+ /* Free any previously allocated psymbol lists. */
+
+ if (objfile->global_psymbols.list)
+ {
+ mfree (objfile->md, (PTR) objfile->global_psymbols.list);
+ }
+ if (objfile->static_psymbols.list)
+ {
+ mfree (objfile->md, (PTR) objfile->static_psymbols.list);
+ }
+
+ /* Current best guess is that approximately a twentieth
+ of the total symbols (in a debugging file) are global or static
+ oriented symbols */
+
+ objfile->global_psymbols.size = total_symbols / 10;
+ objfile->static_psymbols.size = total_symbols / 10;
+
+ if (objfile->global_psymbols.size > 0)
+ {
+ objfile->global_psymbols.next =
+ objfile->global_psymbols.list = (struct partial_symbol **)
+ xmmalloc (objfile->md, (objfile->global_psymbols.size
+ * sizeof (struct partial_symbol *)));
+ }
+ if (objfile->static_psymbols.size > 0)
+ {
+ objfile->static_psymbols.next =
+ objfile->static_psymbols.list = (struct partial_symbol **)
+ xmmalloc (objfile->md, (objfile->static_psymbols.size
+ * sizeof (struct partial_symbol *)));
+ }
+}
+
+/* OVERLAYS:
+ The following code implements an abstraction for debugging overlay sections.
+
+ The target model is as follows:
+ 1) The gnu linker will permit multiple sections to be mapped into the
+ same VMA, each with its own unique LMA (or load address).
+ 2) It is assumed that some runtime mechanism exists for mapping the
+ sections, one by one, from the load address into the VMA address.
+ 3) This code provides a mechanism for gdb to keep track of which
+ sections should be considered to be mapped from the VMA to the LMA.
+ This information is used for symbol lookup, and memory read/write.
+ For instance, if a section has been mapped then its contents
+ should be read from the VMA, otherwise from the LMA.
+
+ Two levels of debugger support for overlays are available. One is
+ "manual", in which the debugger relies on the user to tell it which
+ overlays are currently mapped. This level of support is
+ implemented entirely in the core debugger, and the information about
+ whether a section is mapped is kept in the objfile->obj_section table.
+
+ The second level of support is "automatic", and is only available if
+ the target-specific code provides functionality to read the target's
+ overlay mapping table, and translate its contents for the debugger
+ (by updating the mapped state information in the obj_section tables).
+
+ The interface is as follows:
+ User commands:
+ overlay map <name> -- tell gdb to consider this section mapped
+ overlay unmap <name> -- tell gdb to consider this section unmapped
+ overlay list -- list the sections that GDB thinks are mapped
+ overlay read-target -- get the target's state of what's mapped
+ overlay off/manual/auto -- set overlay debugging state
+ Functional interface:
+ find_pc_mapped_section(pc): if the pc is in the range of a mapped
+ section, return that section.
+ find_pc_overlay(pc): find any overlay section that contains
+ the pc, either in its VMA or its LMA
+ overlay_is_mapped(sect): true if overlay is marked as mapped
+ section_is_overlay(sect): true if section's VMA != LMA
+ pc_in_mapped_range(pc,sec): true if pc belongs to section's VMA
+ pc_in_unmapped_range(...): true if pc belongs to section's LMA
+ overlay_mapped_address(...): map an address from section's LMA to VMA
+ overlay_unmapped_address(...): map an address from section's VMA to LMA
+ symbol_overlayed_address(...): Return a "current" address for symbol:
+ either in VMA or LMA depending on whether
+ the symbol's section is currently mapped
+ */
+
+/* Overlay debugging state: */
+
+int overlay_debugging = 0; /* 0 == off, 1 == manual, -1 == auto */
+int overlay_cache_invalid = 0; /* True if need to refresh mapped state */
+
+/* Target vector for refreshing overlay mapped state */
+static void simple_overlay_update PARAMS ((struct obj_section *));
+void (*target_overlay_update) PARAMS ((struct obj_section *))
+= simple_overlay_update;
+
+/* Function: section_is_overlay (SECTION)
+ Returns true if SECTION has VMA not equal to LMA, ie.
+ SECTION is loaded at an address different from where it will "run". */
+
+int
+section_is_overlay (section)
+ asection *section;
+{
+ if (overlay_debugging)
+ if (section && section->lma != 0 &&
+ section->vma != section->lma)
+ return 1;
+
+ return 0;
+}
+
+/* Function: overlay_invalidate_all (void)
+ Invalidate the mapped state of all overlay sections (mark it as stale). */
+
+static void
+overlay_invalidate_all ()
+{
+ struct objfile *objfile;
+ struct obj_section *sect;
+
+ ALL_OBJSECTIONS (objfile, sect)
+ if (section_is_overlay (sect->the_bfd_section))
+ sect->ovly_mapped = -1;
+}
+
+/* Function: overlay_is_mapped (SECTION)
+ Returns true if section is an overlay, and is currently mapped.
+ Private: public access is thru function section_is_mapped.
+
+ Access to the ovly_mapped flag is restricted to this function, so
+ that we can do automatic update. If the global flag
+ OVERLAY_CACHE_INVALID is set (by wait_for_inferior), then call
+ overlay_invalidate_all. If the mapped state of the particular
+ section is stale, then call TARGET_OVERLAY_UPDATE to refresh it. */
+
+static int
+overlay_is_mapped (osect)
+ struct obj_section *osect;
+{
+ if (osect == 0 || !section_is_overlay (osect->the_bfd_section))
+ return 0;
+
+ switch (overlay_debugging)
+ {
+ default:
+ case 0:
+ return 0; /* overlay debugging off */
+ case -1: /* overlay debugging automatic */
+ /* Unles there is a target_overlay_update function,
+ there's really nothing useful to do here (can't really go auto) */
+ if (target_overlay_update)
+ {
+ if (overlay_cache_invalid)
+ {
+ overlay_invalidate_all ();
+ overlay_cache_invalid = 0;
+ }
+ if (osect->ovly_mapped == -1)
+ (*target_overlay_update) (osect);
+ }
+ /* fall thru to manual case */
+ case 1: /* overlay debugging manual */
+ return osect->ovly_mapped == 1;
+ }
+}
+
+/* Function: section_is_mapped
+ Returns true if section is an overlay, and is currently mapped. */
+
+int
+section_is_mapped (section)
+ asection *section;
+{
+ struct objfile *objfile;
+ struct obj_section *osect;
+
+ if (overlay_debugging)
+ if (section && section_is_overlay (section))
+ ALL_OBJSECTIONS (objfile, osect)
+ if (osect->the_bfd_section == section)
+ return overlay_is_mapped (osect);
+
+ return 0;
+}
+
+/* Function: pc_in_unmapped_range
+ If PC falls into the lma range of SECTION, return true, else false. */
+
+CORE_ADDR
+pc_in_unmapped_range (pc, section)
+ CORE_ADDR pc;
+ asection *section;
+{
+ int size;
+
+ if (overlay_debugging)
+ if (section && section_is_overlay (section))
+ {
+ size = bfd_get_section_size_before_reloc (section);
+ if (section->lma <= pc && pc < section->lma + size)
+ return 1;
+ }
+ return 0;
+}
+
+/* Function: pc_in_mapped_range
+ If PC falls into the vma range of SECTION, return true, else false. */
+
+CORE_ADDR
+pc_in_mapped_range (pc, section)
+ CORE_ADDR pc;
+ asection *section;
+{
+ int size;
+
+ if (overlay_debugging)
+ if (section && section_is_overlay (section))
+ {
+ size = bfd_get_section_size_before_reloc (section);
+ if (section->vma <= pc && pc < section->vma + size)
+ return 1;
+ }
+ return 0;
+}
+
+/* Function: overlay_unmapped_address (PC, SECTION)
+ Returns the address corresponding to PC in the unmapped (load) range.
+ May be the same as PC. */
+
+CORE_ADDR
+overlay_unmapped_address (pc, section)
+ CORE_ADDR pc;
+ asection *section;
+{
+ if (overlay_debugging)
+ if (section && section_is_overlay (section) &&
+ pc_in_mapped_range (pc, section))
+ return pc + section->lma - section->vma;
+
+ return pc;
+}
+
+/* Function: overlay_mapped_address (PC, SECTION)
+ Returns the address corresponding to PC in the mapped (runtime) range.
+ May be the same as PC. */
+
+CORE_ADDR
+overlay_mapped_address (pc, section)
+ CORE_ADDR pc;
+ asection *section;
+{
+ if (overlay_debugging)
+ if (section && section_is_overlay (section) &&
+ pc_in_unmapped_range (pc, section))
+ return pc + section->vma - section->lma;
+
+ return pc;
+}
+
+
+/* Function: symbol_overlayed_address
+ Return one of two addresses (relative to the VMA or to the LMA),
+ depending on whether the section is mapped or not. */
+
+CORE_ADDR
+symbol_overlayed_address (address, section)
+ CORE_ADDR address;
+ asection *section;
+{
+ if (overlay_debugging)
+ {
+ /* If the symbol has no section, just return its regular address. */
+ if (section == 0)
+ return address;
+ /* If the symbol's section is not an overlay, just return its address */
+ if (!section_is_overlay (section))
+ return address;
+ /* If the symbol's section is mapped, just return its address */
+ if (section_is_mapped (section))
+ return address;
+ /*
+ * HOWEVER: if the symbol is in an overlay section which is NOT mapped,
+ * then return its LOADED address rather than its vma address!!
+ */
+ return overlay_unmapped_address (address, section);
+ }
+ return address;
+}
+
+/* Function: find_pc_overlay (PC)
+ Return the best-match overlay section for PC:
+ If PC matches a mapped overlay section's VMA, return that section.
+ Else if PC matches an unmapped section's VMA, return that section.
+ Else if PC matches an unmapped section's LMA, return that section. */
+
+asection *
+find_pc_overlay (pc)
+ CORE_ADDR pc;
+{
+ struct objfile *objfile;
+ struct obj_section *osect, *best_match = NULL;
+
+ if (overlay_debugging)
+ ALL_OBJSECTIONS (objfile, osect)
+ if (section_is_overlay (osect->the_bfd_section))
+ {
+ if (pc_in_mapped_range (pc, osect->the_bfd_section))
+ {
+ if (overlay_is_mapped (osect))
+ return osect->the_bfd_section;
+ else
+ best_match = osect;
+ }
+ else if (pc_in_unmapped_range (pc, osect->the_bfd_section))
+ best_match = osect;
+ }
+ return best_match ? best_match->the_bfd_section : NULL;
+}
+
+/* Function: find_pc_mapped_section (PC)
+ If PC falls into the VMA address range of an overlay section that is
+ currently marked as MAPPED, return that section. Else return NULL. */
+
+asection *
+find_pc_mapped_section (pc)
+ CORE_ADDR pc;
+{
+ struct objfile *objfile;
+ struct obj_section *osect;
+
+ if (overlay_debugging)
+ ALL_OBJSECTIONS (objfile, osect)
+ if (pc_in_mapped_range (pc, osect->the_bfd_section) &&
+ overlay_is_mapped (osect))
+ return osect->the_bfd_section;
+
+ return NULL;
+}
+
+/* Function: list_overlays_command
+ Print a list of mapped sections and their PC ranges */
+
+void
+list_overlays_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ int nmapped = 0;
+ struct objfile *objfile;
+ struct obj_section *osect;
+
+ if (overlay_debugging)
+ ALL_OBJSECTIONS (objfile, osect)
+ if (overlay_is_mapped (osect))
+ {
+ const char *name;
+ bfd_vma lma, vma;
+ int size;
+
+ vma = bfd_section_vma (objfile->obfd, osect->the_bfd_section);
+ lma = bfd_section_lma (objfile->obfd, osect->the_bfd_section);
+ size = bfd_get_section_size_before_reloc (osect->the_bfd_section);
+ name = bfd_section_name (objfile->obfd, osect->the_bfd_section);
+
+ printf_filtered ("Section %s, loaded at ", name);
+ print_address_numeric (lma, 1, gdb_stdout);
+ puts_filtered (" - ");
+ print_address_numeric (lma + size, 1, gdb_stdout);
+ printf_filtered (", mapped at ");
+ print_address_numeric (vma, 1, gdb_stdout);
+ puts_filtered (" - ");
+ print_address_numeric (vma + size, 1, gdb_stdout);
+ puts_filtered ("\n");
+
+ nmapped++;
+ }
+ if (nmapped == 0)
+ printf_filtered ("No sections are mapped.\n");
+}
+
+/* Function: map_overlay_command
+ Mark the named section as mapped (ie. residing at its VMA address). */
+
+void
+map_overlay_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ struct objfile *objfile, *objfile2;
+ struct obj_section *sec, *sec2;
+ asection *bfdsec;
+
+ if (!overlay_debugging)
+ error ("Overlay debugging not enabled. Use the 'OVERLAY ON' command.");
+
+ if (args == 0 || *args == 0)
+ error ("Argument required: name of an overlay section");
+
+ /* First, find a section matching the user supplied argument */
+ ALL_OBJSECTIONS (objfile, sec)
+ if (!strcmp (bfd_section_name (objfile->obfd, sec->the_bfd_section), args))
+ {
+ /* Now, check to see if the section is an overlay. */
+ bfdsec = sec->the_bfd_section;
+ if (!section_is_overlay (bfdsec))
+ continue; /* not an overlay section */
+
+ /* Mark the overlay as "mapped" */
+ sec->ovly_mapped = 1;
+
+ /* Next, make a pass and unmap any sections that are
+ overlapped by this new section: */
+ ALL_OBJSECTIONS (objfile2, sec2)
+ if (sec2->ovly_mapped &&
+ sec != sec2 &&
+ sec->the_bfd_section != sec2->the_bfd_section &&
+ (pc_in_mapped_range (sec2->addr, sec->the_bfd_section) ||
+ pc_in_mapped_range (sec2->endaddr, sec->the_bfd_section)))
+ {
+ if (info_verbose)
+ printf_filtered ("Note: section %s unmapped by overlap\n",
+ bfd_section_name (objfile->obfd,
+ sec2->the_bfd_section));
+ sec2->ovly_mapped = 0; /* sec2 overlaps sec: unmap sec2 */
+ }
+ return;
+ }
+ error ("No overlay section called %s", args);
+}
+
+/* Function: unmap_overlay_command
+ Mark the overlay section as unmapped
+ (ie. resident in its LMA address range, rather than the VMA range). */
+
+void
+unmap_overlay_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ struct objfile *objfile;
+ struct obj_section *sec;
+
+ if (!overlay_debugging)
+ error ("Overlay debugging not enabled. Use the 'OVERLAY ON' command.");
+
+ if (args == 0 || *args == 0)
+ error ("Argument required: name of an overlay section");
+
+ /* First, find a section matching the user supplied argument */
+ ALL_OBJSECTIONS (objfile, sec)
+ if (!strcmp (bfd_section_name (objfile->obfd, sec->the_bfd_section), args))
+ {
+ if (!sec->ovly_mapped)
+ error ("Section %s is not mapped", args);
+ sec->ovly_mapped = 0;
+ return;
+ }
+ error ("No overlay section called %s", args);
+}
+
+/* Function: overlay_auto_command
+ A utility command to turn on overlay debugging.
+ Possibly this should be done via a set/show command. */
+
+static void
+overlay_auto_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ overlay_debugging = -1;
+ if (info_verbose)
+ printf_filtered ("Automatic overlay debugging enabled.");
+}
+
+/* Function: overlay_manual_command
+ A utility command to turn on overlay debugging.
+ Possibly this should be done via a set/show command. */
+
+static void
+overlay_manual_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ overlay_debugging = 1;
+ if (info_verbose)
+ printf_filtered ("Overlay debugging enabled.");
+}
+
+/* Function: overlay_off_command
+ A utility command to turn on overlay debugging.
+ Possibly this should be done via a set/show command. */
+
+static void
+overlay_off_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ overlay_debugging = 0;
+ if (info_verbose)
+ printf_filtered ("Overlay debugging disabled.");
+}
+
+static void
+overlay_load_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ if (target_overlay_update)
+ (*target_overlay_update) (NULL);
+ else
+ error ("This target does not know how to read its overlay state.");
+}
+
+/* Function: overlay_command
+ A place-holder for a mis-typed command */
+
+/* Command list chain containing all defined "overlay" subcommands. */
+struct cmd_list_element *overlaylist;
+
+static void
+overlay_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ printf_unfiltered
+ ("\"overlay\" must be followed by the name of an overlay command.\n");
+ help_list (overlaylist, "overlay ", -1, gdb_stdout);
+}
+
+
+/* Target Overlays for the "Simplest" overlay manager:
+
+ This is GDB's default target overlay layer. It works with the
+ minimal overlay manager supplied as an example by Cygnus. The
+ entry point is via a function pointer "target_overlay_update",
+ so targets that use a different runtime overlay manager can
+ substitute their own overlay_update function and take over the
+ function pointer.
+
+ The overlay_update function pokes around in the target's data structures
+ to see what overlays are mapped, and updates GDB's overlay mapping with
+ this information.
+
+ In this simple implementation, the target data structures are as follows:
+ unsigned _novlys; /# number of overlay sections #/
+ unsigned _ovly_table[_novlys][4] = {
+ {VMA, SIZE, LMA, MAPPED}, /# one entry per overlay section #/
+ {..., ..., ..., ...},
+ }
+ unsigned _novly_regions; /# number of overlay regions #/
+ unsigned _ovly_region_table[_novly_regions][3] = {
+ {VMA, SIZE, MAPPED_TO_LMA}, /# one entry per overlay region #/
+ {..., ..., ...},
+ }
+ These functions will attempt to update GDB's mappedness state in the
+ symbol section table, based on the target's mappedness state.
+
+ To do this, we keep a cached copy of the target's _ovly_table, and
+ attempt to detect when the cached copy is invalidated. The main
+ entry point is "simple_overlay_update(SECT), which looks up SECT in
+ the cached table and re-reads only the entry for that section from
+ the target (whenever possible).
+ */
+
+/* Cached, dynamically allocated copies of the target data structures: */
+static unsigned (*cache_ovly_table)[4] = 0;
+#if 0
+static unsigned (*cache_ovly_region_table)[3] = 0;
+#endif
+static unsigned cache_novlys = 0;
+#if 0
+static unsigned cache_novly_regions = 0;
+#endif
+static CORE_ADDR cache_ovly_table_base = 0;
+#if 0
+static CORE_ADDR cache_ovly_region_table_base = 0;
+#endif
+enum ovly_index
+ {
+ VMA, SIZE, LMA, MAPPED
+ };
+#define TARGET_LONG_BYTES (TARGET_LONG_BIT / TARGET_CHAR_BIT)
+
+/* Throw away the cached copy of _ovly_table */
+static void
+simple_free_overlay_table ()
+{
+ if (cache_ovly_table)
+ free (cache_ovly_table);
+ cache_novlys = 0;
+ cache_ovly_table = NULL;
+ cache_ovly_table_base = 0;
+}
+
+#if 0
+/* Throw away the cached copy of _ovly_region_table */
+static void
+simple_free_overlay_region_table ()
+{
+ if (cache_ovly_region_table)
+ free (cache_ovly_region_table);
+ cache_novly_regions = 0;
+ cache_ovly_region_table = NULL;
+ cache_ovly_region_table_base = 0;
+}
+#endif
+
+/* Read an array of ints from the target into a local buffer.
+ Convert to host order. int LEN is number of ints */
+static void
+read_target_long_array (memaddr, myaddr, len)
+ CORE_ADDR memaddr;
+ unsigned int *myaddr;
+ int len;
+{
+ char *buf = alloca (len * TARGET_LONG_BYTES);
+ int i;
+
+ read_memory (memaddr, buf, len * TARGET_LONG_BYTES);
+ for (i = 0; i < len; i++)
+ myaddr[i] = extract_unsigned_integer (TARGET_LONG_BYTES * i + buf,
+ TARGET_LONG_BYTES);
+}
+
+/* Find and grab a copy of the target _ovly_table
+ (and _novlys, which is needed for the table's size) */
+static int
+simple_read_overlay_table ()
+{
+ struct minimal_symbol *msym;
+
+ simple_free_overlay_table ();
+ msym = lookup_minimal_symbol ("_novlys", 0, 0);
+ if (msym != NULL)
+ cache_novlys = read_memory_integer (SYMBOL_VALUE_ADDRESS (msym), 4);
+ else
+ return 0; /* failure */
+ cache_ovly_table = (void *) xmalloc (cache_novlys * sizeof (*cache_ovly_table));
+ if (cache_ovly_table != NULL)
+ {
+ msym = lookup_minimal_symbol ("_ovly_table", 0, 0);
+ if (msym != NULL)
+ {
+ cache_ovly_table_base = SYMBOL_VALUE_ADDRESS (msym);
+ read_target_long_array (cache_ovly_table_base,
+ (int *) cache_ovly_table,
+ cache_novlys * 4);
+ }
+ else
+ return 0; /* failure */
+ }
+ else
+ return 0; /* failure */
+ return 1; /* SUCCESS */
+}
+
+#if 0
+/* Find and grab a copy of the target _ovly_region_table
+ (and _novly_regions, which is needed for the table's size) */
+static int
+simple_read_overlay_region_table ()
+{
+ struct minimal_symbol *msym;
+
+ simple_free_overlay_region_table ();
+ msym = lookup_minimal_symbol ("_novly_regions", 0, 0);
+ if (msym != NULL)
+ cache_novly_regions = read_memory_integer (SYMBOL_VALUE_ADDRESS (msym), 4);
+ else
+ return 0; /* failure */
+ cache_ovly_region_table = (void *) xmalloc (cache_novly_regions * 12);
+ if (cache_ovly_region_table != NULL)
+ {
+ msym = lookup_minimal_symbol ("_ovly_region_table", 0, 0);
+ if (msym != NULL)
+ {
+ cache_ovly_region_table_base = SYMBOL_VALUE_ADDRESS (msym);
+ read_target_long_array (cache_ovly_region_table_base,
+ (int *) cache_ovly_region_table,
+ cache_novly_regions * 3);
+ }
+ else
+ return 0; /* failure */
+ }
+ else
+ return 0; /* failure */
+ return 1; /* SUCCESS */
+}
+#endif
+
+/* Function: simple_overlay_update_1
+ A helper function for simple_overlay_update. Assuming a cached copy
+ of _ovly_table exists, look through it to find an entry whose vma,
+ lma and size match those of OSECT. Re-read the entry and make sure
+ it still matches OSECT (else the table may no longer be valid).
+ Set OSECT's mapped state to match the entry. Return: 1 for
+ success, 0 for failure. */
+
+static int
+simple_overlay_update_1 (osect)
+ struct obj_section *osect;
+{
+ int i, size;
+
+ size = bfd_get_section_size_before_reloc (osect->the_bfd_section);
+ for (i = 0; i < cache_novlys; i++)
+ if (cache_ovly_table[i][VMA] == osect->the_bfd_section->vma &&
+ cache_ovly_table[i][LMA] == osect->the_bfd_section->lma /* &&
+ cache_ovly_table[i][SIZE] == size */ )
+ {
+ read_target_long_array (cache_ovly_table_base + i * TARGET_LONG_BYTES,
+ (int *) cache_ovly_table[i], 4);
+ if (cache_ovly_table[i][VMA] == osect->the_bfd_section->vma &&
+ cache_ovly_table[i][LMA] == osect->the_bfd_section->lma /* &&
+ cache_ovly_table[i][SIZE] == size */ )
+ {
+ osect->ovly_mapped = cache_ovly_table[i][MAPPED];
+ return 1;
+ }
+ else /* Warning! Warning! Target's ovly table has changed! */
+ return 0;
+ }
+ return 0;
+}
+
+/* Function: simple_overlay_update
+ If OSECT is NULL, then update all sections' mapped state
+ (after re-reading the entire target _ovly_table).
+ If OSECT is non-NULL, then try to find a matching entry in the
+ cached ovly_table and update only OSECT's mapped state.
+ If a cached entry can't be found or the cache isn't valid, then
+ re-read the entire cache, and go ahead and update all sections. */
+
+static void
+simple_overlay_update (osect)
+ struct obj_section *osect;
+{
+ struct objfile *objfile;
+
+ /* Were we given an osect to look up? NULL means do all of them. */
+ if (osect)
+ /* Have we got a cached copy of the target's overlay table? */
+ if (cache_ovly_table != NULL)
+ /* Does its cached location match what's currently in the symtab? */
+ if (cache_ovly_table_base ==
+ SYMBOL_VALUE_ADDRESS (lookup_minimal_symbol ("_ovly_table", 0, 0)))
+ /* Then go ahead and try to look up this single section in the cache */
+ if (simple_overlay_update_1 (osect))
+ /* Found it! We're done. */
+ return;
+
+ /* Cached table no good: need to read the entire table anew.
+ Or else we want all the sections, in which case it's actually
+ more efficient to read the whole table in one block anyway. */
+
+ if (simple_read_overlay_table () == 0) /* read failed? No table? */
+ {
+ warning ("Failed to read the target overlay mapping table.");
+ return;
+ }
+ /* Now may as well update all sections, even if only one was requested. */
+ ALL_OBJSECTIONS (objfile, osect)
+ if (section_is_overlay (osect->the_bfd_section))
+ {
+ int i, size;
+
+ size = bfd_get_section_size_before_reloc (osect->the_bfd_section);
+ for (i = 0; i < cache_novlys; i++)
+ if (cache_ovly_table[i][VMA] == osect->the_bfd_section->vma &&
+ cache_ovly_table[i][LMA] == osect->the_bfd_section->lma /* &&
+ cache_ovly_table[i][SIZE] == size */ )
+ { /* obj_section matches i'th entry in ovly_table */
+ osect->ovly_mapped = cache_ovly_table[i][MAPPED];
+ break; /* finished with inner for loop: break out */
+ }
+ }
+}
+
+
+void
+_initialize_symfile ()
+{
+ struct cmd_list_element *c;
+
+ c = add_cmd ("symbol-file", class_files, symbol_file_command,
+ "Load symbol table from executable file FILE.\n\
+The `file' command can also load symbol tables, as well as setting the file\n\
+to execute.", &cmdlist);
+ c->completer = filename_completer;
+
+ c = add_cmd ("add-symbol-file", class_files, add_symbol_file_command,
+ "Usage: add-symbol-file FILE ADDR [DATA_ADDR [BSS_ADDR]]\n\
+or: add-symbol-file FILE -T<SECT> <SECT_ADDR> -T<SECT> <SECT_ADDR> ...\n\
+Load the symbols from FILE, assuming FILE has been dynamically loaded.\n\
+ADDR is the starting address of the file's text.\n\
+The optional arguments, DATA_ADDR and BSS_ADDR, should be specified\n\
+if the data and bss segments are not contiguous with the text.\n\
+For complicated cases, SECT is a section name to be loaded at SECT_ADDR.",
+ &cmdlist);
+ c->completer = filename_completer;
+
+ c = add_cmd ("add-shared-symbol-files", class_files,
+ add_shared_symbol_files_command,
+ "Load the symbols from shared objects in the dynamic linker's link map.",
+ &cmdlist);
+ c = add_alias_cmd ("assf", "add-shared-symbol-files", class_files, 1,
+ &cmdlist);
+
+ c = add_cmd ("load", class_files, load_command,
+ "Dynamically load FILE into the running program, and record its symbols\n\
+for access from GDB.", &cmdlist);
+ c->completer = filename_completer;
add_show_from_set
- (add_set_cmd ("complaints", class_support, var_uinteger,
- (char *)&stop_whining,
- "Set max number of complaints about incorrect symbols.",
+ (add_set_cmd ("symbol-reloading", class_support, var_boolean,
+ (char *) &symbol_reloading,
+ "Set dynamic symbol table reloading multiple times in one run.",
&setlist),
&showlist);
+ add_prefix_cmd ("overlay", class_support, overlay_command,
+ "Commands for debugging overlays.", &overlaylist,
+ "overlay ", 0, &cmdlist);
+
+ add_com_alias ("ovly", "overlay", class_alias, 1);
+ add_com_alias ("ov", "overlay", class_alias, 1);
+
+ add_cmd ("map-overlay", class_support, map_overlay_command,
+ "Assert that an overlay section is mapped.", &overlaylist);
+
+ add_cmd ("unmap-overlay", class_support, unmap_overlay_command,
+ "Assert that an overlay section is unmapped.", &overlaylist);
+
+ add_cmd ("list-overlays", class_support, list_overlays_command,
+ "List mappings of overlay sections.", &overlaylist);
+
+ add_cmd ("manual", class_support, overlay_manual_command,
+ "Enable overlay debugging.", &overlaylist);
+ add_cmd ("off", class_support, overlay_off_command,
+ "Disable overlay debugging.", &overlaylist);
+ add_cmd ("auto", class_support, overlay_auto_command,
+ "Enable automatic overlay debugging.", &overlaylist);
+ add_cmd ("load-target", class_support, overlay_load_command,
+ "Read the overlay mapping state from the target.", &overlaylist);
+
+ /* Filename extension to source language lookup table: */
+ init_filename_language_table ();
+ c = add_set_cmd ("extension-language", class_files, var_string_noescape,
+ (char *) &ext_args,
+ "Set mapping between filename extension and source language.\n\
+Usage: set extension-language .foo bar",
+ &setlist);
+ c->function.cfunc = set_ext_lang_command;
+
+ add_info ("extensions", info_ext_lang_command,
+ "All filename extensions associated with a source language.");
+
add_show_from_set
- (add_set_cmd ("symbol-reloading", class_support, var_boolean,
- (char *)&symbol_reloading,
- "Set dynamic symbol table reloading multiple times in one run.",
+ (add_set_cmd ("download-write-size", class_obscure,
+ var_integer, (char *) &download_write_size,
+ "Set the write size used when downloading a program.\n"
+ "Only used when downloading a program onto a remote\n"
+ "target. Specify zero, or a negative value, to disable\n"
+ "blocked writes. The actual size of each transfer is also\n"
+ "limited by the size of the target packet and the memory\n"
+ "cache.\n",
&setlist),
&showlist);
-
- obstack_init (symbol_obstack);
- obstack_init (psymbol_obstack);
}