#include "completer.h"
#include "bcache.h"
#include "hashtab.h"
-#include <readline/readline.h>
+#include "readline/readline.h"
#include "gdb_assert.h"
#include "block.h"
+#include "observer.h"
#include <sys/types.h>
#include <fcntl.h>
#define O_BINARY 0
#endif
-#ifdef HPUXHPPA
-
-/* Some HP-UX related globals to clear when a new "main"
- symbol file is loaded. HP-specific. */
-
-extern int hp_som_som_object_present;
-extern int hp_cxx_exception_support_initialized;
-#define RESET_HP_UX_GLOBALS() do {\
- hp_som_som_object_present = 0; /* indicates HP-compiled code */ \
- hp_cxx_exception_support_initialized = 0; /* must reinitialize exception stuff */ \
- } while (0)
-#endif
-
-int (*ui_load_progress_hook) (const char *section, unsigned long num);
-void (*show_load_progress) (const char *section,
- unsigned long section_sent,
- unsigned long section_size,
- unsigned long total_sent,
+int (*deprecated_ui_load_progress_hook) (const char *section, unsigned long num);
+void (*deprecated_show_load_progress) (const char *section,
+ unsigned long section_sent,
+ unsigned long section_size,
+ unsigned long total_sent,
unsigned long total_size);
-void (*pre_add_symbol_hook) (char *);
-void (*post_add_symbol_hook) (void);
-void (*target_new_objfile_hook) (struct objfile *);
+void (*deprecated_pre_add_symbol_hook) (const char *);
+void (*deprecated_post_add_symbol_hook) (void);
+void (*deprecated_target_new_objfile_hook) (struct objfile *);
static void clear_symtab_users_cleanup (void *ignore);
static void add_filename_language (char *ext, enum language lang);
-static void set_ext_lang_command (char *args, int from_tty);
-
static void info_ext_lang_command (char *args, int from_tty);
static char *find_separate_debug_file (struct objfile *objfile);
#else
int symbol_reloading = 0;
#endif
+static void
+show_symbol_reloading (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Dynamic symbol table reloading multiple times in one run is %s.\n"),
+ value);
+}
+
/* If non-zero, shared library symbols will be added automatically
when the inferior is created, new libraries are loaded, or when
struct partial_symbol *const *s1 = s1p;
struct partial_symbol *const *s2 = s2p;
- return strcmp_iw_ordered (SYMBOL_NATURAL_NAME (*s1),
- SYMBOL_NATURAL_NAME (*s2));
+ return strcmp_iw_ordered (SYMBOL_SEARCH_NAME (*s1),
+ SYMBOL_SEARCH_NAME (*s2));
}
void
return pst->symtab;
}
-/* Remember the lowest-addressed loadable section we've seen.
- This function is called via bfd_map_over_sections.
+/* Remember the lowest-addressed loadable section we've seen.
+ This function is called via bfd_map_over_sections.
In case of equal vmas, the section with the largest size becomes the
lowest-addressed loadable section.
return sap;
}
+
+/* Return a freshly allocated copy of ADDRS. The section names, if
+ any, are also freshly allocated copies of those in ADDRS. */
+struct section_addr_info *
+copy_section_addr_info (struct section_addr_info *addrs)
+{
+ struct section_addr_info *copy
+ = alloc_section_addr_info (addrs->num_sections);
+ int i;
+
+ copy->num_sections = addrs->num_sections;
+ for (i = 0; i < addrs->num_sections; i++)
+ {
+ copy->other[i].addr = addrs->other[i].addr;
+ if (addrs->other[i].name)
+ copy->other[i].name = xstrdup (addrs->other[i].name);
+ else
+ copy->other[i].name = NULL;
+ copy->other[i].sectindex = addrs->other[i].sectindex;
+ }
+
+ return copy;
+}
+
+
+
/* Build (allocate and populate) a section_addr_info struct from
an existing section table. */
for (stp = start, oidx = 0; stp != end; stp++)
{
- if (bfd_get_section_flags (stp->bfd,
+ if (bfd_get_section_flags (stp->bfd,
stp->the_bfd_section) & (SEC_ALLOC | SEC_LOAD)
&& oidx < end - start)
{
sap->other[oidx].addr = stp->addr;
- sap->other[oidx].name
+ sap->other[oidx].name
= xstrdup (bfd_section_name (stp->bfd, stp->the_bfd_section));
sap->other[oidx].sectindex = stp->the_bfd_section->index;
oidx++;
{
asection *sect;
int i;
-
+
sect = bfd_get_section_by_name (objfile->obfd, ".text");
- if (sect)
+ if (sect)
objfile->sect_index_text = sect->index;
sect = bfd_get_section_by_name (objfile->obfd, ".data");
- if (sect)
+ if (sect)
objfile->sect_index_data = sect->index;
sect = bfd_get_section_by_name (objfile->obfd, ".bss");
- if (sect)
+ if (sect)
objfile->sect_index_bss = sect->index;
sect = bfd_get_section_by_name (objfile->obfd, ".rodata");
- if (sect)
+ if (sect)
objfile->sect_index_rodata = sect->index;
/* This is where things get really weird... We MUST have valid
/* Parse the user's idea of an offset for dynamic linking, into our idea
- of how to represent it for fast symbol reading. This is the default
+ of how to represent it for fast symbol reading. This is the default
version of the sym_fns.sym_offsets function for symbol readers that
don't need to do anything special. It allocates a section_offsets table
for the objectfile OBJFILE and stuffs ADDR into all of the offsets. */
objfile->num_sections = bfd_count_sections (objfile->obfd);
objfile->section_offsets = (struct section_offsets *)
- obstack_alloc (&objfile->objfile_obstack,
+ obstack_alloc (&objfile->objfile_obstack,
SIZEOF_N_SECTION_OFFSETS (objfile->num_sections));
- memset (objfile->section_offsets, 0,
+ memset (objfile->section_offsets, 0,
SIZEOF_N_SECTION_OFFSETS (objfile->num_sections));
/* Now calculate offsets for section that were specified by the
no load address was specified. */
if (! addrs && ! offsets)
{
- local_addr
+ local_addr
= alloc_section_addr_info (bfd_count_sections (objfile->obfd));
make_cleanup (xfree, local_addr);
addrs = local_addr;
CORE_ADDR lower_offset;
int i;
- /* Find lowest loadable section to be used as starting point for
+ /* Find lowest loadable section to be used as starting point for
continguous sections. FIXME!! won't work without call to find
.text first, but this assumes text is lowest section. */
lower_sect = bfd_get_section_by_name (objfile->obfd, ".text");
bfd_map_over_sections (objfile->obfd, find_lowest_section,
&lower_sect);
if (lower_sect == NULL)
- warning ("no loadable sections found in added symbol-file %s",
+ warning (_("no loadable sections found in added symbol-file %s"),
objfile->name);
- else
+ else
if ((bfd_get_section_flags (objfile->obfd, lower_sect) & SEC_CODE) == 0)
- warning ("Lowest section in %s is %s at %s",
+ warning (_("Lowest section in %s is %s at %s"),
objfile->name,
bfd_section_name (objfile->obfd, lower_sect),
paddr (bfd_section_vma (objfile->obfd, lower_sect)));
lower_offset = bfd_section_vma (objfile->obfd, lower_sect);
else
lower_offset = 0;
-
+
/* Calculate offsets for the loadable sections.
FIXME! Sections must be in order of increasing loadable section
so that contiguous sections can use the lower-offset!!!
-
+
Adjust offsets if the segments are not contiguous.
If the section is contiguous, its offset should be set to
the offset of the highest loadable section lower than it
}
else
{
- warning ("section %s not found in %s",
- addrs->other[i].name,
+ warning (_("section %s not found in %s"),
+ addrs->other[i].name,
objfile->name);
addrs->other[i].addr = 0;
}
{
struct obj_section *s;
- /* Map section offsets in "addr" back to the object's
- sections by comparing the section names with bfd's
+ /* Map section offsets in "addr" back to the object's
+ sections by comparing the section names with bfd's
section names. Then adjust the section address by
the offset. */ /* for gdb/13815 */
-
+
ALL_OBJFILE_OSECTIONS (objfile, s)
{
CORE_ADDR s_addr = 0;
int i;
- for (i = 0;
+ for (i = 0;
!s_addr && i < addrs->num_sections && addrs->other[i].name;
i++)
- if (strcmp (bfd_section_name (s->objfile->obfd,
- s->the_bfd_section),
+ if (strcmp (bfd_section_name (s->objfile->obfd,
+ s->the_bfd_section),
addrs->other[i].name) == 0)
s_addr = addrs->other[i].addr; /* end added for gdb/13815 */
-
+
s->addr -= s->offset;
s->addr += s_addr;
s->endaddr -= s->offset;
/* Process a symbol file, as either the main file or as a dynamically
loaded file.
- NAME is the file name (which will be tilde-expanded and made
- absolute herein) (but we don't free or modify NAME itself).
+ ABFD is a BFD already open on the file, as from symfile_bfd_open.
+ This BFD will be closed on error, and is always consumed by this function.
FROM_TTY says how verbose to be.
Upon success, returns a pointer to the objfile that was added.
Upon failure, jumps back to command level (never returns). */
static struct objfile *
-symbol_file_add_with_addrs_or_offsets (char *name, int from_tty,
+symbol_file_add_with_addrs_or_offsets (bfd *abfd, int from_tty,
struct section_addr_info *addrs,
struct section_offsets *offsets,
int num_offsets,
struct objfile *objfile;
struct partial_symtab *psymtab;
char *debugfile;
- bfd *abfd;
- struct section_addr_info *orig_addrs;
+ struct section_addr_info *orig_addrs = NULL;
struct cleanup *my_cleanups;
+ const char *name = bfd_get_filename (abfd);
- /* Open a bfd for the file, and give user a chance to burp if we'd be
- interactively wiping out any existing symbols. */
+ my_cleanups = make_cleanup_bfd_close (abfd);
- abfd = symfile_bfd_open (name);
+ /* Give user a chance to burp if we'd be
+ interactively wiping out any existing symbols. */
if ((have_full_symbols () || have_partial_symbols ())
&& mainline
&& from_tty
&& !query ("Load new symbol table from \"%s\"? ", name))
- error ("Not confirmed.");
+ error (_("Not confirmed."));
objfile = allocate_objfile (abfd, flags);
+ discard_cleanups (my_cleanups);
- orig_addrs = alloc_section_addr_info (bfd_count_sections (abfd));
- my_cleanups = make_cleanup (xfree, orig_addrs);
if (addrs)
{
- int i;
- orig_addrs->num_sections = addrs->num_sections;
- for (i = 0; i < addrs->num_sections; i++)
- orig_addrs->other[i] = addrs->other[i];
+ orig_addrs = copy_section_addr_info (addrs);
+ make_cleanup_free_section_addr_info (orig_addrs);
}
/* We either created a new mapped symbol table, mapped an existing
performed, or need to read an unmapped symbol table. */
if (from_tty || info_verbose)
{
- if (pre_add_symbol_hook)
- pre_add_symbol_hook (name);
+ if (deprecated_pre_add_symbol_hook)
+ deprecated_pre_add_symbol_hook (name);
else
{
- printf_unfiltered ("Reading symbols from %s...", name);
+ printf_unfiltered (_("Reading symbols from %s..."), name);
wrap_here ("");
gdb_flush (gdb_stdout);
}
{
if (from_tty || info_verbose)
{
- printf_unfiltered ("expanding to full symbols...");
+ printf_unfiltered (_("expanding to full symbols..."));
wrap_here ("");
gdb_flush (gdb_stdout);
}
}
objfile->separate_debug_objfile->separate_debug_objfile_backlink
= objfile;
-
+
/* Put the separate debug object before the normal one, this is so that
usage of the ALL_OBJFILES_SAFE macro will stay safe. */
put_objfile_before (objfile->separate_debug_objfile, objfile);
-
+
xfree (debugfile);
}
-
+
if (!have_partial_symbols () && !have_full_symbols ())
{
wrap_here ("");
- printf_unfiltered ("(no debugging symbols found)...");
+ printf_filtered (_("(no debugging symbols found)"));
+ if (from_tty || info_verbose)
+ printf_filtered ("...");
+ else
+ printf_filtered ("\n");
wrap_here ("");
}
if (from_tty || info_verbose)
{
- if (post_add_symbol_hook)
- post_add_symbol_hook ();
+ if (deprecated_post_add_symbol_hook)
+ deprecated_post_add_symbol_hook ();
else
{
- printf_unfiltered ("done.\n");
+ printf_unfiltered (_("done.\n"));
}
}
new_symfile_objfile (objfile, mainline, from_tty);
- if (target_new_objfile_hook)
- target_new_objfile_hook (objfile);
+ if (deprecated_target_new_objfile_hook)
+ deprecated_target_new_objfile_hook (objfile);
+ bfd_cache_close_all ();
return (objfile);
}
+/* Process the symbol file ABFD, as either the main file or as a
+ dynamically loaded file.
+
+ See symbol_file_add_with_addrs_or_offsets's comments for
+ details. */
+struct objfile *
+symbol_file_add_from_bfd (bfd *abfd, int from_tty,
+ struct section_addr_info *addrs,
+ int mainline, int flags)
+{
+ return symbol_file_add_with_addrs_or_offsets (abfd,
+ from_tty, addrs, 0, 0,
+ mainline, flags);
+}
+
+
/* Process a symbol file, as either the main file or as a dynamically
loaded file. See symbol_file_add_with_addrs_or_offsets's comments
for details. */
symbol_file_add (char *name, int from_tty, struct section_addr_info *addrs,
int mainline, int flags)
{
- return symbol_file_add_with_addrs_or_offsets (name, from_tty, addrs, 0, 0,
- mainline, flags);
+ return symbol_file_add_from_bfd (symfile_bfd_open (name), from_tty,
+ addrs, mainline, flags);
}
The auxiliary function, symbol_file_add_main_1(), has the flags
argument for the switches that can only be specified in the symbol_file
command itself. */
-
+
void
symbol_file_add_main (char *args, int from_tty)
{
{
symbol_file_add (args, from_tty, NULL, 1, flags);
-#ifdef HPUXHPPA
- RESET_HP_UX_GLOBALS ();
-#endif
-
/* Getting new symbols may change our opinion about
what is frameless. */
reinit_frame_cache ();
&& from_tty
&& !query ("Discard symbol table from `%s'? ",
symfile_objfile->name))
- error ("Not confirmed.");
+ error (_("Not confirmed."));
free_all_objfiles ();
/* solib descriptors may have handles to objfiles. Since their
symfile_objfile = NULL;
if (from_tty)
- printf_unfiltered ("No symbol file now.\n");
-#ifdef HPUXHPPA
- RESET_HP_UX_GLOBALS ();
-#endif
+ printf_unfiltered (_("No symbol file now.\n"));
}
static char *
char *contents;
int crc_offset;
unsigned char *p;
-
+
sect = bfd_get_section_by_name (objfile->obfd, ".gnu_debuglink");
if (sect == NULL)
return NULL;
debuglink_size = bfd_section_size (objfile->obfd, sect);
-
+
contents = xmalloc (debuglink_size);
bfd_get_section_contents (objfile->obfd, sect, contents,
(file_ptr)0, (bfd_size_type)debuglink_size);
crc_offset = (crc_offset + 3) & ~3;
crc32 = bfd_get_32 (objfile->obfd, (bfd_byte *) (contents + crc_offset));
-
+
*crc32_out = crc32;
return contents;
}
}
static char *debug_file_directory = NULL;
+static void
+show_debug_file_directory (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+The directory where separate debug symbols are searched for is \"%s\".\n"),
+ value);
+}
#if ! defined (DEBUG_SUBDIRECTORY)
#define DEBUG_SUBDIRECTORY ".debug"
if (basename == NULL)
return NULL;
-
+
dir = xstrdup (objfile->name);
/* Strip off the final filename part, leaving the directory name,
}
gdb_assert (i >= 0 && IS_DIR_SEPARATOR (dir[i]));
dir[i+1] = '\0';
-
+
debugfile = alloca (strlen (debug_file_directory) + 1
+ strlen (dir)
+ strlen (DEBUG_SUBDIRECTORY)
+ strlen ("/")
- + strlen (basename)
+ + strlen (basename)
+ 1);
/* First try in the same directory as the original file. */
xfree (dir);
return xstrdup (debugfile);
}
-
+
/* Then try in the subdirectory named DEBUG_SUBDIRECTORY. */
strcpy (debugfile, dir);
strcat (debugfile, DEBUG_SUBDIRECTORY);
xfree (dir);
return xstrdup (debugfile);
}
-
+
/* Then try in the global debugfile directory. */
strcpy (debugfile, debug_file_directory);
strcat (debugfile, "/");
xfree (dir);
return xstrdup (debugfile);
}
-
+
xfree (basename);
xfree (dir);
return NULL;
if (strcmp (*argv, "-readnow") == 0)
flags |= OBJF_READNOW;
else if (**argv == '-')
- error ("unknown option `%s'", *argv);
+ error (_("unknown option `%s'"), *argv);
else
{
name = *argv;
-
+
symbol_file_add_main_1 (name, from_tty, flags);
}
argv++;
if (name == NULL)
{
- error ("no symbol file name was specified");
+ error (_("no symbol file name was specified"));
}
do_cleanups (cleanups);
}
name = tilde_expand (name); /* Returns 1st new malloc'd copy */
/* Look down path for it, allocate 2nd new malloc'd copy. */
- desc = openp (getenv ("PATH"), 1, name, O_RDONLY | O_BINARY, 0, &absolute_name);
+ desc = openp (getenv ("PATH"), OPF_TRY_CWD_FIRST, name, O_RDONLY | O_BINARY,
+ 0, &absolute_name);
#if defined(__GO32__) || defined(_WIN32) || defined (__CYGWIN__)
if (desc < 0)
{
char *exename = alloca (strlen (name) + 5);
strcat (strcpy (exename, name), ".exe");
- desc = openp (getenv ("PATH"), 1, exename, O_RDONLY | O_BINARY,
- 0, &absolute_name);
+ desc = openp (getenv ("PATH"), OPF_TRY_CWD_FIRST, exename,
+ O_RDONLY | O_BINARY, 0, &absolute_name);
}
#endif
if (desc < 0)
{
close (desc);
make_cleanup (xfree, name);
- error ("\"%s\": can't open to read symbols: %s.", name,
+ error (_("\"%s\": can't open to read symbols: %s."), name,
bfd_errmsg (bfd_get_error ()));
}
bfd_set_cacheable (sym_bfd, 1);
bfd). */
bfd_close (sym_bfd); /* This also closes desc */
make_cleanup (xfree, name);
- error ("\"%s\": can't read symbols: %s.", name,
+ error (_("\"%s\": can't read symbols: %s."), name,
bfd_errmsg (bfd_get_error ()));
}
return (sym_bfd);
return;
}
}
- error ("I'm sorry, Dave, I can't do that. Symbol format `%s' unknown.",
+ error (_("I'm sorry, Dave, I can't do that. Symbol format `%s' unknown."),
bfd_get_target (objfile->obfd));
}
\f
performance compares. */
static int download_write_size = 512;
+static void
+show_download_write_size (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+The write size used when downloading a program is %s.\n"),
+ value);
+}
static int validate_download = 0;
/* Callback service function for generic_load (bfd_map_over_sections). */
{
bfd_size_type *sum = data;
- *sum += bfd_get_section_size_before_reloc (asec);
+ *sum += bfd_get_section_size (asec);
}
/* Opaque data for load_section_callback. */
if (bfd_get_section_flags (abfd, asec) & SEC_LOAD)
{
- bfd_size_type size = bfd_get_section_size_before_reloc (asec);
+ bfd_size_type size = bfd_get_section_size (asec);
if (size > 0)
{
char *buffer;
that. remote.c could implement that method
using the ``qCRC'' packet. */
char *check = xmalloc (len);
- struct cleanup *verify_cleanups =
+ struct cleanup *verify_cleanups =
make_cleanup (xfree, check);
if (target_read_memory (lma, check, len) != 0)
- error ("Download verify read failed at 0x%s",
+ error (_("Download verify read failed at 0x%s"),
paddr (lma));
if (memcmp (buffer, check, len) != 0)
- error ("Download verify compare failed at 0x%s",
+ error (_("Download verify compare failed at 0x%s"),
paddr (lma));
do_cleanups (verify_cleanups);
}
args->write_count += 1;
sent += len;
if (quit_flag
- || (ui_load_progress_hook != NULL
- && ui_load_progress_hook (sect_name, sent)))
- error ("Canceled the download");
-
- if (show_load_progress != NULL)
- show_load_progress (sect_name, sent, size,
- args->data_count, args->total_size);
+ || (deprecated_ui_load_progress_hook != NULL
+ && deprecated_ui_load_progress_hook (sect_name, sent)))
+ error (_("Canceled the download"));
+
+ if (deprecated_show_load_progress != NULL)
+ deprecated_show_load_progress (sect_name, sent, size,
+ args->data_count,
+ args->total_size);
}
while (sent < size);
if (err != 0)
- error ("Memory access error while loading section %s.", sect_name);
+ error (_("Memory access error while loading section %s."), sect_name);
do_cleanups (old_chain);
}
cbdata.load_offset = strtoul (offptr, &endptr, 0);
if (offptr == endptr)
- error ("Invalid download offset:%s\n", offptr);
+ error (_("Invalid download offset:%s."), offptr);
*offptr = '\0';
}
else
if (!bfd_check_format (loadfile_bfd, bfd_object))
{
- error ("\"%s\" is not an object file: %s", filename,
+ error (_("\"%s\" is not an object file: %s"), filename,
bfd_errmsg (bfd_get_error ()));
}
- bfd_map_over_sections (loadfile_bfd, add_section_size_callback,
+ bfd_map_over_sections (loadfile_bfd, add_section_size_callback,
(void *) &cbdata.total_size);
start_time = time (NULL);
to a comment from remote-mips.c (where a call to symbol_file_add
was commented out), making the call confuses GDB if more than one
file is loaded in. Some targets do (e.g., remote-vx.c) but
- others don't (or didn't - perhaphs they have all been deleted). */
+ others don't (or didn't - perhaps they have all been deleted). */
- print_transfer_performance (gdb_stdout, cbdata.data_count,
+ print_transfer_performance (gdb_stdout, cbdata.data_count,
cbdata.write_count, end_time - start_time);
do_cleanups (old_cleanups);
report_transfer_performance (unsigned long data_count, time_t start_time,
time_t end_time)
{
- print_transfer_performance (gdb_stdout, data_count,
+ print_transfer_performance (gdb_stdout, data_count,
end_time - start_time, 0);
}
ui_out_text (uiout, "Transfer rate: ");
if (time_count > 0)
{
- ui_out_field_fmt (uiout, "transfer-rate", "%lu",
+ ui_out_field_fmt (uiout, "transfer-rate", "%lu",
(data_count * 8) / time_count);
ui_out_text (uiout, " bits/sec");
}
else
{
ui_out_field_fmt (uiout, "transferred-bits", "%lu", (data_count * 8));
- ui_out_text (uiout, " bits in <1 sec");
+ ui_out_text (uiout, " bits in <1 sec");
}
if (write_count > 0)
{
struct cleanup *my_cleanups = make_cleanup (null_cleanup, NULL);
num_sect_opts = 16;
- sect_opts = (struct sect_opt *) xmalloc (num_sect_opts
+ sect_opts = (struct sect_opt *) xmalloc (num_sect_opts
* sizeof (struct sect_opt));
dont_repeat ();
if (args == NULL)
- error ("add-symbol-file takes a file name and an address");
+ error (_("add-symbol-file takes a file name and an address"));
/* Make a copy of the string that we can safely write into. */
args = xstrdup (args);
to load the program. */
sect_opts[section_index].name = ".text";
sect_opts[section_index].value = arg;
- if (++section_index > num_sect_opts)
+ if (++section_index > num_sect_opts)
{
num_sect_opts *= 2;
- sect_opts = ((struct sect_opt *)
+ sect_opts = ((struct sect_opt *)
xrealloc (sect_opts,
- num_sect_opts
+ num_sect_opts
* sizeof (struct sect_opt)));
}
}
{
sect_opts[section_index].value = arg;
expecting_sec_addr = 0;
- if (++section_index > num_sect_opts)
+ if (++section_index > num_sect_opts)
{
num_sect_opts *= 2;
- sect_opts = ((struct sect_opt *)
+ sect_opts = ((struct sect_opt *)
xrealloc (sect_opts,
- num_sect_opts
+ num_sect_opts
* sizeof (struct sect_opt)));
}
}
else
- error ("USAGE: add-symbol-file <filename> <textaddress> [-mapped] [-readnow] [-s <secname> <addr>]*");
+ error (_("USAGE: add-symbol-file <filename> <textaddress> [-mapped] [-readnow] [-s <secname> <addr>]*"));
}
}
argcnt++;
/* Print the prompt for the query below. And save the arguments into
a sect_addr_info structure to be passed around to other
functions. We have to split this up into separate print
- statements because local_hex_string returns a local static
+ statements because hex_string returns a local static
string. */
-
- printf_unfiltered ("add symbol table from file \"%s\" at\n", filename);
+
+ printf_unfiltered (_("add symbol table from file \"%s\" at\n"), filename);
section_addrs = alloc_section_addr_info (section_index);
make_cleanup (xfree, section_addrs);
for (i = 0; i < section_index; i++)
CORE_ADDR addr;
char *val = sect_opts[i].value;
char *sec = sect_opts[i].name;
-
+
addr = parse_and_eval_address (val);
/* Here we store the section offsets in the order they were
section_addrs->other[sec_num].name = sec;
section_addrs->other[sec_num].addr = addr;
printf_unfiltered ("\t%s_addr = %s\n",
- sec,
- local_hex_string ((unsigned long)addr));
+ sec, hex_string ((unsigned long)addr));
sec_num++;
- /* The object's sections are initialized when a
+ /* The object's sections are initialized when a
call is made to build_objfile_section_table (objfile).
- This happens in reread_symbols.
+ This happens in reread_symbols.
At this point, we don't know what file type this is,
so we can't determine what section names are valid. */
}
if (from_tty && (!query ("%s", "")))
- error ("Not confirmed.");
+ error (_("Not confirmed."));
symbol_file_add (filename, from_tty, section_addrs, 0, flags);
#ifdef ADD_SHARED_SYMBOL_FILES
ADD_SHARED_SYMBOL_FILES (args, from_tty);
#else
- error ("This command is not available in this configuration of GDB.");
+ error (_("This command is not available in this configuration of GDB."));
#endif
}
\f
if (res != 0)
{
/* FIXME, should use print_sys_errmsg but it's not filtered. */
- printf_unfiltered ("`%s' has disappeared; keeping its symbols.\n",
+ printf_unfiltered (_("`%s' has disappeared; keeping its symbols.\n"),
objfile->name);
continue;
}
int num_offsets;
char *obfd_filename;
- printf_unfiltered ("`%s' has changed; re-reading symbols.\n",
+ printf_unfiltered (_("`%s' has changed; re-reading symbols.\n"),
objfile->name);
/* There are various functions like symbol_file_add,
BFD without closing the descriptor. */
obfd_filename = bfd_get_filename (objfile->obfd);
if (!bfd_close (objfile->obfd))
- error ("Can't close BFD for %s: %s", objfile->name,
+ error (_("Can't close BFD for %s: %s"), objfile->name,
bfd_errmsg (bfd_get_error ()));
objfile->obfd = bfd_openr (obfd_filename, gnutarget);
if (objfile->obfd == NULL)
- error ("Can't open %s to read symbols.", objfile->name);
+ error (_("Can't open %s to read symbols."), objfile->name);
/* bfd_openr sets cacheable to true, which is what we want. */
if (!bfd_check_format (objfile->obfd, bfd_object))
- error ("Can't read symbols from %s: %s.", objfile->name,
+ error (_("Can't read symbols from %s: %s."), objfile->name,
bfd_errmsg (bfd_get_error ()));
/* Save the offsets, we will nuke them with the rest of the
objfile_obstack. */
num_offsets = objfile->num_sections;
- offsets = ((struct section_offsets *)
+ offsets = ((struct section_offsets *)
alloca (SIZEOF_N_SECTION_OFFSETS (num_offsets)));
- memcpy (offsets, objfile->section_offsets,
+ memcpy (offsets, objfile->section_offsets,
SIZEOF_N_SECTION_OFFSETS (num_offsets));
/* Nuke all the state that we will re-read. Much of the following
/* FIXME: Do we have to free a whole linked list, or is this
enough? */
if (objfile->global_psymbols.list)
- xmfree (objfile->md, objfile->global_psymbols.list);
+ xfree (objfile->global_psymbols.list);
memset (&objfile->global_psymbols, 0,
sizeof (objfile->global_psymbols));
if (objfile->static_psymbols.list)
- xmfree (objfile->md, objfile->static_psymbols.list);
+ xfree (objfile->static_psymbols.list);
memset (&objfile->static_psymbols, 0,
sizeof (objfile->static_psymbols));
objfile->free_psymtabs = NULL;
objfile->cp_namespace_symtab = NULL;
objfile->msymbols = NULL;
- objfile->sym_private = NULL;
+ objfile->deprecated_sym_private = NULL;
objfile->minimal_symbol_count = 0;
memset (&objfile->msymbol_hash, 0,
sizeof (objfile->msymbol_hash));
obstack_init (&objfile->objfile_obstack);
if (build_objfile_section_table (objfile))
{
- error ("Can't find the file sections in `%s': %s",
+ error (_("Can't find the file sections in `%s': %s"),
objfile->name, bfd_errmsg (bfd_get_error ()));
}
terminate_minimal_symbol_table (objfile);
/* We use the same section offsets as from last time. I'm not
sure whether that is always correct for shared libraries. */
objfile->section_offsets = (struct section_offsets *)
- obstack_alloc (&objfile->objfile_obstack,
+ obstack_alloc (&objfile->objfile_obstack,
SIZEOF_N_SECTION_OFFSETS (num_offsets));
- memcpy (objfile->section_offsets, offsets,
+ memcpy (objfile->section_offsets, offsets,
SIZEOF_N_SECTION_OFFSETS (num_offsets));
objfile->num_sections = num_offsets;
if (objfile == symfile_objfile)
{
(*objfile->sf->sym_new_init) (objfile);
-#ifdef HPUXHPPA
- RESET_HP_UX_GLOBALS ();
-#endif
}
(*objfile->sf->sym_init) (objfile);
if (!have_partial_symbols () && !have_full_symbols ())
{
wrap_here ("");
- printf_unfiltered ("(no debugging symbols found)\n");
+ printf_unfiltered (_("(no debugging symbols found)\n"));
wrap_here ("");
}
objfile->flags |= OBJF_SYMS;
}
if (reread_one)
- clear_symtab_users ();
+ {
+ clear_symtab_users ();
+ /* At least one objfile has changed, so we can consider that
+ the executable we're debugging has changed too. */
+ observer_notify_executable_changed (NULL);
+ }
+
}
separated debug info, or
- if the new primary objfile has separate debug
info, but it's under a different filename.
-
+
If the old and new objfiles both have separate
debug info, under the same filename, then we're
okay --- if the separated file's contents have
Preserve the flags from objfile that make sense. */
objfile->separate_debug_objfile
= (symbol_file_add_with_addrs_or_offsets
- (debug_file,
+ (symfile_bfd_open (debug_file),
info_verbose, /* from_tty: Don't override the default. */
0, /* No addr table. */
objfile->section_offsets, objfile->num_sections,
if (fl_table_next >= fl_table_size)
{
fl_table_size += 10;
- filename_language_table =
+ filename_language_table =
xrealloc (filename_language_table,
fl_table_size * sizeof (*filename_language_table));
}
}
static char *ext_args;
+static void
+show_ext_args (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Mapping between filename extension and source language is \"%s\".\n"),
+ value);
+}
static void
-set_ext_lang_command (char *args, int from_tty)
+set_ext_lang_command (char *args, int from_tty, struct cmd_list_element *e)
{
int i;
char *cp = ext_args;
/* First arg is filename extension, starting with '.' */
if (*cp != '.')
- error ("'%s': Filename extension must begin with '.'", ext_args);
+ error (_("'%s': Filename extension must begin with '.'"), ext_args);
/* Find end of first arg. */
while (*cp && !isspace (*cp))
cp++;
if (*cp == '\0')
- error ("'%s': two arguments required -- filename extension and language",
+ error (_("'%s': two arguments required -- filename extension and language"),
ext_args);
/* Null-terminate first arg */
cp++;
if (*cp == '\0')
- error ("'%s': two arguments required -- filename extension and language",
+ error (_("'%s': two arguments required -- filename extension and language"),
ext_args);
/* Lookup the language from among those we know. */
{
int i;
- printf_filtered ("Filename extensions and the languages they represent:");
+ printf_filtered (_("Filename extensions and the languages they represent:"));
printf_filtered ("\n\n");
for (i = 0; i < fl_table_next; i++)
printf_filtered ("\t%s\t- %s\n",
add_filename_language (".pas", language_pascal);
add_filename_language (".p", language_pascal);
add_filename_language (".pp", language_pascal);
+ add_filename_language (".adb", language_ada);
+ add_filename_language (".ads", language_ada);
+ add_filename_language (".a", language_ada);
+ add_filename_language (".ada", language_ada);
}
}
{
/* Someday, we should do better than this, by only blowing away
the things that really need to be blown. */
+
+ /* Clear the "current" symtab first, because it is no longer valid.
+ breakpoint_re_set may try to access the current symtab. */
+ clear_current_source_symtab_and_line ();
+
clear_value_history ();
clear_displays ();
clear_internalvars ();
breakpoint_re_set ();
set_default_breakpoint (0, 0, 0, 0);
- clear_current_source_symtab_and_line ();
clear_pc_function_cache ();
- if (target_new_objfile_hook)
- target_new_objfile_hook (NULL);
+ if (deprecated_target_new_objfile_hook)
+ deprecated_target_new_objfile_hook (NULL);
}
static void
This function is run after symbol reading, or from a cleanup.
If an old symbol table was obsoleted, the old symbol table
- has been blown away, but the other GDB data structures that may
+ has been blown away, but the other GDB data structures that may
reference it have not yet been cleared or re-directed. (The old
symtab was zapped, and the cleanup queued, in free_named_symtab()
below.)
|| BLOCK_NSYMS (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK))
|| BLOCK_NSYMS (BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK)))
{
- complaint (&symfile_complaints, "Replacing old symbols for `%s'",
+ complaint (&symfile_complaints, _("Replacing old symbols for `%s'"),
name);
clear_symtab_users_queued++;
make_cleanup (clear_symtab_users_once, 0);
blewit = 1;
}
else
- {
- complaint (&symfile_complaints, "Empty symbol table found for `%s'",
- name);
- }
+ complaint (&symfile_complaints, _("Empty symbol table found for `%s'"),
+ name);
free_symtab (s);
}
}
\f
/* Add a symbol with a long value to a psymtab.
- Since one arg is a struct, we pass in a ptr and deref it (sigh).
+ Since one arg is a struct, we pass in a ptr and deref it (sigh).
Return the partial symbol that has been added. */
/* NOTE: carlton/2003-09-11: The reason why we return the partial
if (objfile->global_psymbols.list)
{
- xmfree (objfile->md, objfile->global_psymbols.list);
+ xfree (objfile->global_psymbols.list);
}
if (objfile->static_psymbols.list)
{
- xmfree (objfile->md, objfile->static_psymbols.list);
+ xfree (objfile->static_psymbols.list);
}
/* Current best guess is that approximately a twentieth
{
objfile->global_psymbols.next =
objfile->global_psymbols.list = (struct partial_symbol **)
- xmmalloc (objfile->md, (objfile->global_psymbols.size
- * sizeof (struct partial_symbol *)));
+ xmalloc ((objfile->global_psymbols.size
+ * sizeof (struct partial_symbol *)));
}
if (objfile->static_psymbols.size > 0)
{
objfile->static_psymbols.next =
objfile->static_psymbols.list = (struct partial_symbol **)
- xmmalloc (objfile->md, (objfile->static_psymbols.size
- * sizeof (struct partial_symbol *)));
+ xmalloc ((objfile->static_psymbols.size
+ * sizeof (struct partial_symbol *)));
}
}
same VMA, each with its own unique LMA (or load address).
2) It is assumed that some runtime mechanism exists for mapping the
sections, one by one, from the load address into the VMA address.
- 3) This code provides a mechanism for gdb to keep track of which
+ 3) This code provides a mechanism for gdb to keep track of which
sections should be considered to be mapped from the VMA to the LMA.
This information is used for symbol lookup, and memory read/write.
- For instance, if a section has been mapped then its contents
+ For instance, if a section has been mapped then its contents
should be read from the VMA, otherwise from the LMA.
Two levels of debugger support for overlays are available. One is
Functional interface:
find_pc_mapped_section(pc): if the pc is in the range of a mapped
section, return that section.
- find_pc_overlay(pc): find any overlay section that contains
+ find_pc_overlay(pc): find any overlay section that contains
the pc, either in its VMA or its LMA
overlay_is_mapped(sect): true if overlay is marked as mapped
section_is_overlay(sect): true if section's VMA != LMA
void (*target_overlay_update) (struct obj_section *) = simple_overlay_update;
/* Function: section_is_overlay (SECTION)
- Returns true if SECTION has VMA not equal to LMA, ie.
+ Returns true if SECTION has VMA not equal to LMA, ie.
SECTION is loaded at an address different from where it will "run". */
int
}
/* Function: overlay_is_mapped (SECTION)
- Returns true if section is an overlay, and is currently mapped.
+ Returns true if section is an overlay, and is currently mapped.
Private: public access is thru function section_is_mapped.
Access to the ovly_mapped flag is restricted to this function, so
case ovly_off:
return 0; /* overlay debugging off */
case ovly_auto: /* overlay debugging automatic */
- /* Unles there is a target_overlay_update function,
+ /* Unles there is a target_overlay_update function,
there's really nothing useful to do here (can't really go auto) */
if (target_overlay_update)
{
if (overlay_debugging)
if (section && section_is_overlay (section))
{
- size = bfd_get_section_size_before_reloc (section);
+ size = bfd_get_section_size (section);
if (section->lma <= pc && pc < section->lma + size)
return 1;
}
if (overlay_debugging)
if (section && section_is_overlay (section))
{
- size = bfd_get_section_size_before_reloc (section);
+ size = bfd_get_section_size (section);
if (section->vma <= pc && pc < section->vma + size)
return 1;
}
/* FIXME: need bfd *, so we can use bfd_section_vma methods. */
CORE_ADDR a_start = a->vma;
- CORE_ADDR a_end = a->vma + bfd_get_section_size_before_reloc (a);
+ CORE_ADDR a_end = a->vma + bfd_get_section_size (a);
CORE_ADDR b_start = b->vma;
- CORE_ADDR b_end = b->vma + bfd_get_section_size_before_reloc (b);
+ CORE_ADDR b_end = b->vma + bfd_get_section_size (b);
return (a_start < b_end && b_start < a_end);
}
}
-/* Function: symbol_overlayed_address
+/* Function: symbol_overlayed_address
Return one of two addresses (relative to the VMA or to the LMA),
depending on whether the section is mapped or not. */
return address;
}
-/* Function: find_pc_overlay (PC)
+/* Function: find_pc_overlay (PC)
Return the best-match overlay section for PC:
If PC matches a mapped overlay section's VMA, return that section.
Else if PC matches an unmapped section's VMA, return that section.
}
/* Function: find_pc_mapped_section (PC)
- If PC falls into the VMA address range of an overlay section that is
+ If PC falls into the VMA address range of an overlay section that is
currently marked as MAPPED, return that section. Else return NULL. */
asection *
vma = bfd_section_vma (objfile->obfd, osect->the_bfd_section);
lma = bfd_section_lma (objfile->obfd, osect->the_bfd_section);
- size = bfd_get_section_size_before_reloc (osect->the_bfd_section);
+ size = bfd_get_section_size (osect->the_bfd_section);
name = bfd_section_name (objfile->obfd, osect->the_bfd_section);
printf_filtered ("Section %s, loaded at ", name);
- print_address_numeric (lma, 1, gdb_stdout);
+ deprecated_print_address_numeric (lma, 1, gdb_stdout);
puts_filtered (" - ");
- print_address_numeric (lma + size, 1, gdb_stdout);
+ deprecated_print_address_numeric (lma + size, 1, gdb_stdout);
printf_filtered (", mapped at ");
- print_address_numeric (vma, 1, gdb_stdout);
+ deprecated_print_address_numeric (vma, 1, gdb_stdout);
puts_filtered (" - ");
- print_address_numeric (vma + size, 1, gdb_stdout);
+ deprecated_print_address_numeric (vma + size, 1, gdb_stdout);
puts_filtered ("\n");
nmapped++;
}
if (nmapped == 0)
- printf_filtered ("No sections are mapped.\n");
+ printf_filtered (_("No sections are mapped.\n"));
}
/* Function: map_overlay_command
asection *bfdsec;
if (!overlay_debugging)
- error ("\
+ error (_("\
Overlay debugging not enabled. Use either the 'overlay auto' or\n\
-the 'overlay manual' command.");
+the 'overlay manual' command."));
if (args == 0 || *args == 0)
- error ("Argument required: name of an overlay section");
+ error (_("Argument required: name of an overlay section"));
/* First, find a section matching the user supplied argument */
ALL_OBJSECTIONS (objfile, sec)
sec2->the_bfd_section))
{
if (info_verbose)
- printf_unfiltered ("Note: section %s unmapped by overlap\n",
+ printf_unfiltered (_("Note: section %s unmapped by overlap\n"),
bfd_section_name (objfile->obfd,
sec2->the_bfd_section));
sec2->ovly_mapped = 0; /* sec2 overlaps sec: unmap sec2 */
}
return;
}
- error ("No overlay section called %s", args);
+ error (_("No overlay section called %s"), args);
}
/* Function: unmap_overlay_command
- Mark the overlay section as unmapped
+ Mark the overlay section as unmapped
(ie. resident in its LMA address range, rather than the VMA range). */
void
struct obj_section *sec;
if (!overlay_debugging)
- error ("\
+ error (_("\
Overlay debugging not enabled. Use either the 'overlay auto' or\n\
-the 'overlay manual' command.");
+the 'overlay manual' command."));
if (args == 0 || *args == 0)
- error ("Argument required: name of an overlay section");
+ error (_("Argument required: name of an overlay section"));
/* First, find a section matching the user supplied argument */
ALL_OBJSECTIONS (objfile, sec)
if (!strcmp (bfd_section_name (objfile->obfd, sec->the_bfd_section), args))
{
if (!sec->ovly_mapped)
- error ("Section %s is not mapped", args);
+ error (_("Section %s is not mapped"), args);
sec->ovly_mapped = 0;
return;
}
- error ("No overlay section called %s", args);
+ error (_("No overlay section called %s"), args);
}
/* Function: overlay_auto_command
overlay_debugging = ovly_auto;
enable_overlay_breakpoints ();
if (info_verbose)
- printf_unfiltered ("Automatic overlay debugging enabled.");
+ printf_unfiltered (_("Automatic overlay debugging enabled."));
}
/* Function: overlay_manual_command
overlay_debugging = ovly_on;
disable_overlay_breakpoints ();
if (info_verbose)
- printf_unfiltered ("Overlay debugging enabled.");
+ printf_unfiltered (_("Overlay debugging enabled."));
}
/* Function: overlay_off_command
overlay_debugging = ovly_off;
disable_overlay_breakpoints ();
if (info_verbose)
- printf_unfiltered ("Overlay debugging disabled.");
+ printf_unfiltered (_("Overlay debugging disabled."));
}
static void
if (target_overlay_update)
(*target_overlay_update) (NULL);
else
- error ("This target does not know how to read its overlay state.");
+ error (_("This target does not know how to read its overlay state."));
}
/* Function: overlay_command
/* Target Overlays for the "Simplest" overlay manager:
- This is GDB's default target overlay layer. It works with the
- minimal overlay manager supplied as an example by Cygnus. The
- entry point is via a function pointer "target_overlay_update",
- so targets that use a different runtime overlay manager can
+ This is GDB's default target overlay layer. It works with the
+ minimal overlay manager supplied as an example by Cygnus. The
+ entry point is via a function pointer "target_overlay_update",
+ so targets that use a different runtime overlay manager can
substitute their own overlay_update function and take over the
function pointer.
novlys_msym = lookup_minimal_symbol ("_novlys", NULL, NULL);
if (! novlys_msym)
{
- error ("Error reading inferior's overlay table: "
+ error (_("Error reading inferior's overlay table: "
"couldn't find `_novlys' variable\n"
- "in inferior. Use `overlay manual' mode.");
+ "in inferior. Use `overlay manual' mode."));
return 0;
}
ovly_table_msym = lookup_minimal_symbol ("_ovly_table", NULL, NULL);
if (! ovly_table_msym)
{
- error ("Error reading inferior's overlay table: couldn't find "
+ error (_("Error reading inferior's overlay table: couldn't find "
"`_ovly_table' array\n"
- "in inferior. Use `overlay manual' mode.");
+ "in inferior. Use `overlay manual' mode."));
return 0;
}
}
#endif
-/* Function: simple_overlay_update_1
+/* Function: simple_overlay_update_1
A helper function for simple_overlay_update. Assuming a cached copy
of _ovly_table exists, look through it to find an entry whose vma,
lma and size match those of OSECT. Re-read the entry and make sure
bfd *obfd = osect->objfile->obfd;
asection *bsect = osect->the_bfd_section;
- size = bfd_get_section_size_before_reloc (osect->the_bfd_section);
+ size = bfd_get_section_size (osect->the_bfd_section);
for (i = 0; i < cache_novlys; i++)
if (cache_ovly_table[i][VMA] == bfd_section_vma (obfd, bsect)
&& cache_ovly_table[i][LMA] == bfd_section_lma (obfd, bsect)
}
/* Function: simple_overlay_update
- If OSECT is NULL, then update all sections' mapped state
- (after re-reading the entire target _ovly_table).
- If OSECT is non-NULL, then try to find a matching entry in the
+ If OSECT is NULL, then update all sections' mapped state
+ (after re-reading the entire target _ovly_table).
+ If OSECT is non-NULL, then try to find a matching entry in the
cached ovly_table and update only OSECT's mapped state.
- If a cached entry can't be found or the cache isn't valid, then
+ If a cached entry can't be found or the cache isn't valid, then
re-read the entire cache, and go ahead and update all sections. */
static void
bfd *obfd = osect->objfile->obfd;
asection *bsect = osect->the_bfd_section;
- size = bfd_get_section_size_before_reloc (osect->the_bfd_section);
+ size = bfd_get_section_size (bsect);
for (i = 0; i < cache_novlys; i++)
if (cache_ovly_table[i][VMA] == bfd_section_vma (obfd, bsect)
&& cache_ovly_table[i][LMA] == bfd_section_lma (obfd, bsect)
{
struct cmd_list_element *c;
- c = add_cmd ("symbol-file", class_files, symbol_file_command,
- "Load symbol table from executable file FILE.\n\
+ c = add_cmd ("symbol-file", class_files, symbol_file_command, _("\
+Load symbol table from executable file FILE.\n\
The `file' command can also load symbol tables, as well as setting the file\n\
-to execute.", &cmdlist);
+to execute."), &cmdlist);
set_cmd_completer (c, filename_completer);
- c = add_cmd ("add-symbol-file", class_files, add_symbol_file_command,
- "Usage: add-symbol-file FILE ADDR [-s <SECT> <SECT_ADDR> -s <SECT> <SECT_ADDR> ...]\n\
+ c = add_cmd ("add-symbol-file", class_files, add_symbol_file_command, _("\
+Usage: add-symbol-file FILE ADDR [-s <SECT> <SECT_ADDR> -s <SECT> <SECT_ADDR> ...]\n\
Load the symbols from FILE, assuming FILE has been dynamically loaded.\n\
ADDR is the starting address of the file's text.\n\
The optional arguments are section-name section-address pairs and\n\
should be specified if the data and bss segments are not contiguous\n\
-with the text. SECT is a section name to be loaded at SECT_ADDR.",
+with the text. SECT is a section name to be loaded at SECT_ADDR."),
&cmdlist);
set_cmd_completer (c, filename_completer);
c = add_cmd ("add-shared-symbol-files", class_files,
- add_shared_symbol_files_command,
- "Load the symbols from shared objects in the dynamic linker's link map.",
+ add_shared_symbol_files_command, _("\
+Load the symbols from shared objects in the dynamic linker's link map."),
&cmdlist);
c = add_alias_cmd ("assf", "add-shared-symbol-files", class_files, 1,
&cmdlist);
- c = add_cmd ("load", class_files, load_command,
- "Dynamically load FILE into the running program, and record its symbols\n\
-for access from GDB.", &cmdlist);
+ c = add_cmd ("load", class_files, load_command, _("\
+Dynamically load FILE into the running program, and record its symbols\n\
+for access from GDB."), &cmdlist);
set_cmd_completer (c, filename_completer);
- add_show_from_set
- (add_set_cmd ("symbol-reloading", class_support, var_boolean,
- (char *) &symbol_reloading,
- "Set dynamic symbol table reloading multiple times in one run.",
- &setlist),
- &showlist);
+ add_setshow_boolean_cmd ("symbol-reloading", class_support,
+ &symbol_reloading, _("\
+Set dynamic symbol table reloading multiple times in one run."), _("\
+Show dynamic symbol table reloading multiple times in one run."), NULL,
+ NULL,
+ show_symbol_reloading,
+ &setlist, &showlist);
add_prefix_cmd ("overlay", class_support, overlay_command,
- "Commands for debugging overlays.", &overlaylist,
+ _("Commands for debugging overlays."), &overlaylist,
"overlay ", 0, &cmdlist);
add_com_alias ("ovly", "overlay", class_alias, 1);
add_com_alias ("ov", "overlay", class_alias, 1);
add_cmd ("map-overlay", class_support, map_overlay_command,
- "Assert that an overlay section is mapped.", &overlaylist);
+ _("Assert that an overlay section is mapped."), &overlaylist);
add_cmd ("unmap-overlay", class_support, unmap_overlay_command,
- "Assert that an overlay section is unmapped.", &overlaylist);
+ _("Assert that an overlay section is unmapped."), &overlaylist);
add_cmd ("list-overlays", class_support, list_overlays_command,
- "List mappings of overlay sections.", &overlaylist);
+ _("List mappings of overlay sections."), &overlaylist);
add_cmd ("manual", class_support, overlay_manual_command,
- "Enable overlay debugging.", &overlaylist);
+ _("Enable overlay debugging."), &overlaylist);
add_cmd ("off", class_support, overlay_off_command,
- "Disable overlay debugging.", &overlaylist);
+ _("Disable overlay debugging."), &overlaylist);
add_cmd ("auto", class_support, overlay_auto_command,
- "Enable automatic overlay debugging.", &overlaylist);
+ _("Enable automatic overlay debugging."), &overlaylist);
add_cmd ("load-target", class_support, overlay_load_command,
- "Read the overlay mapping state from the target.", &overlaylist);
+ _("Read the overlay mapping state from the target."), &overlaylist);
/* Filename extension to source language lookup table: */
init_filename_language_table ();
- c = add_set_cmd ("extension-language", class_files, var_string_noescape,
- (char *) &ext_args,
- "Set mapping between filename extension and source language.\n\
-Usage: set extension-language .foo bar",
- &setlist);
- set_cmd_cfunc (c, set_ext_lang_command);
+ add_setshow_string_noescape_cmd ("extension-language", class_files,
+ &ext_args, _("\
+Set mapping between filename extension and source language."), _("\
+Show mapping between filename extension and source language."), _("\
+Usage: set extension-language .foo bar"),
+ set_ext_lang_command,
+ show_ext_args,
+ &setlist, &showlist);
add_info ("extensions", info_ext_lang_command,
- "All filename extensions associated with a source language.");
-
- add_show_from_set
- (add_set_cmd ("download-write-size", class_obscure,
- var_integer, (char *) &download_write_size,
- "Set the write size used when downloading a program.\n"
- "Only used when downloading a program onto a remote\n"
- "target. Specify zero, or a negative value, to disable\n"
- "blocked writes. The actual size of each transfer is also\n"
- "limited by the size of the target packet and the memory\n"
- "cache.\n",
- &setlist),
- &showlist);
+ _("All filename extensions associated with a source language."));
+
+ add_setshow_integer_cmd ("download-write-size", class_obscure,
+ &download_write_size, _("\
+Set the write size used when downloading a program."), _("\
+Show the write size used when downloading a program."), _("\
+Only used when downloading a program onto a remote\n\
+target. Specify zero, or a negative value, to disable\n\
+blocked writes. The actual size of each transfer is also\n\
+limited by the size of the target packet and the memory\n\
+cache."),
+ NULL,
+ show_download_write_size,
+ &setlist, &showlist);
debug_file_directory = xstrdup (DEBUGDIR);
- c = (add_set_cmd
- ("debug-file-directory", class_support, var_string,
- (char *) &debug_file_directory,
- "Set the directory where separate debug symbols are searched for.\n"
- "Separate debug symbols are first searched for in the same\n"
- "directory as the binary, then in the `" DEBUG_SUBDIRECTORY
- "' subdirectory,\n"
- "and lastly at the path of the directory of the binary with\n"
- "the global debug-file directory prepended\n",
- &setlist));
- add_show_from_set (c, &showlist);
- set_cmd_completer (c, filename_completer);
+ add_setshow_optional_filename_cmd ("debug-file-directory", class_support,
+ &debug_file_directory, _("\
+Set the directory where separate debug symbols are searched for."), _("\
+Show the directory where separate debug symbols are searched for."), _("\
+Separate debug symbols are first searched for in the same\n\
+directory as the binary, then in the `" DEBUG_SUBDIRECTORY "' subdirectory,\n\
+and lastly at the path of the directory of the binary with\n\
+the global debug-file directory prepended."),
+ NULL,
+ show_debug_file_directory,
+ &setlist, &showlist);
}