along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
+#include "arch-utils.h"
#include "bfdlink.h"
#include "symtab.h"
#include "gdbtypes.h"
static void add_symbol_file_command (char *, int);
-static void reread_separate_symbols (struct objfile *objfile);
-
static void cashier_psymtab (struct partial_symtab *);
bfd *symfile_bfd_open (char *);
static void simple_free_overlay_table (void);
-static void read_target_long_array (CORE_ADDR, unsigned int *, int, int);
+static void read_target_long_array (CORE_ADDR, unsigned int *, int, int,
+ enum bfd_endian);
static int simple_read_overlay_table (void);
static void info_ext_lang_command (char *args, int from_tty);
-static char *find_separate_debug_file (struct objfile *objfile);
-
static void init_filename_language_table (void);
static void symfile_find_segment_sections (struct objfile *objfile);
value);
}
-/* If non-zero, gdb will notify the user when it is loading symbols
- from a file. This is almost always what users will want to have happen;
- but for programs with lots of dynamically linked libraries, the output
- can be more noise than signal. */
-
-int print_symbol_loading = 1;
-
/* If non-zero, shared library symbols will be added automatically
when the inferior is created, new libraries are loaded, or when
attaching to the inferior. This is almost always what users will
if (symfile_objfile != NULL)
{
free_objfile (symfile_objfile);
- symfile_objfile = NULL;
+ gdb_assert (symfile_objfile == NULL);
}
/* Currently we keep symbols from the add-symbol-file command.
init_objfile_sect_indices (objfile);
}
- (*objfile->sf->sym_read) (objfile, mainline);
+ (*objfile->sf->sym_read) (objfile, add_flags);
/* Discard cleanups as symbol reading was successful. */
}
else if ((add_flags & SYMFILE_DEFER_BP_RESET) == 0)
{
- breakpoint_re_set_objfile (objfile);
+ breakpoint_re_set ();
}
/* We're done reading the symbol file; finish off complaints. */
{
struct objfile *objfile;
struct partial_symtab *psymtab;
- char *debugfile = NULL;
- struct section_addr_info *orig_addrs = NULL;
struct cleanup *my_cleanups;
const char *name = bfd_get_filename (abfd);
const int from_tty = add_flags & SYMFILE_VERBOSE;
objfile = allocate_objfile (abfd, flags);
discard_cleanups (my_cleanups);
- if (addrs)
- {
- orig_addrs = copy_section_addr_info (addrs);
- make_cleanup_free_section_addr_info (orig_addrs);
- }
-
/* We either created a new mapped symbol table, mapped an existing
symbol table file which has not had initial symbol reading
performed, or need to read an unmapped symbol table. */
deprecated_pre_add_symbol_hook (name);
else
{
- if (print_symbol_loading)
- {
- printf_unfiltered (_("Reading symbols from %s..."), name);
- wrap_here ("");
- gdb_flush (gdb_stdout);
- }
+ printf_unfiltered (_("Reading symbols from %s..."), name);
+ wrap_here ("");
+ gdb_flush (gdb_stdout);
}
}
syms_from_objfile (objfile, addrs, offsets, num_offsets,
if ((flags & OBJF_READNOW) || readnow_symbol_files)
{
- if ((from_tty || info_verbose) && print_symbol_loading)
+ if (from_tty || info_verbose)
{
printf_unfiltered (_("expanding to full symbols..."));
wrap_here ("");
}
}
- /* If the file has its own symbol tables it has no separate debug info.
- `.dynsym'/`.symtab' go to MSYMBOLS, `.debug_info' goes to SYMTABS/PSYMTABS.
- `.gnu_debuglink' may no longer be present with `.note.gnu.build-id'. */
- if (objfile->psymtabs == NULL)
- debugfile = find_separate_debug_file (objfile);
- if (debugfile)
- {
- if (addrs != NULL)
- {
- objfile->separate_debug_objfile
- = symbol_file_add (debugfile, add_flags, orig_addrs, flags);
- }
- else
- {
- objfile->separate_debug_objfile
- = symbol_file_add (debugfile, add_flags, NULL, flags);
- }
- objfile->separate_debug_objfile->separate_debug_objfile_backlink
- = objfile;
-
- /* Put the separate debug object before the normal one, this is so that
- usage of the ALL_OBJFILES_SAFE macro will stay safe. */
- put_objfile_before (objfile->separate_debug_objfile, objfile);
-
- xfree (debugfile);
- }
-
- if (!have_partial_symbols () && !have_full_symbols ()
- && print_symbol_loading)
+ if ((from_tty || info_verbose)
+ && !objfile_has_symbols (objfile))
{
wrap_here ("");
- printf_unfiltered (_("(no debugging symbols found)"));
- if (from_tty || info_verbose)
- printf_unfiltered ("...");
- else
- printf_unfiltered ("\n");
+ printf_unfiltered (_("(no debugging symbols found)..."));
wrap_here ("");
}
if (deprecated_post_add_symbol_hook)
deprecated_post_add_symbol_hook ();
else
- {
- if (print_symbol_loading)
- printf_unfiltered (_("done.\n"));
- }
+ printf_unfiltered (_("done.\n"));
}
/* We print some messages regardless of whether 'from_tty ||
do_cleanups (my_cleanups);
if (objfile->sf == NULL)
- return objfile; /* No symbols. */
+ {
+ observer_notify_new_objfile (objfile);
+ return objfile; /* No symbols. */
+ }
new_symfile_objfile (objfile, add_flags);
return (objfile);
}
+/* Add BFD as a separate debug file for OBJFILE. */
+
+void
+symbol_file_add_separate (bfd *bfd, int symfile_flags, struct objfile *objfile)
+{
+ /* Currently only one separate debug objfile is supported. */
+ gdb_assert (objfile && objfile->separate_debug_objfile == NULL);
+
+ objfile->separate_debug_objfile =
+ symbol_file_add_with_addrs_or_offsets
+ (bfd, symfile_flags,
+ 0, /* No addr table. */
+ objfile->section_offsets, objfile->num_sections,
+ objfile->flags & (OBJF_REORDERED | OBJF_SHARED | OBJF_READNOW
+ | OBJF_USERLOADED));
+ objfile->separate_debug_objfile->separate_debug_objfile_backlink
+ = objfile;
+
+ /* Put the separate debug object before the normal one, this is so that
+ usage of the ALL_OBJFILES_SAFE macro will stay safe. */
+ put_objfile_before (objfile->separate_debug_objfile, objfile);
+}
/* Process the symbol file ABFD, as either the main file or as a
dynamically loaded file.
descriptors as well. */
no_shared_libraries (NULL, from_tty);
- symfile_objfile = NULL;
+ gdb_assert (symfile_objfile == NULL);
if (from_tty)
printf_unfiltered (_("No symbol file now.\n"));
}
-struct build_id
- {
- size_t size;
- gdb_byte data[1];
- };
-
-/* Locate NT_GNU_BUILD_ID from ABFD and return its content. */
-
-static struct build_id *
-build_id_bfd_get (bfd *abfd)
-{
- struct build_id *retval;
-
- if (!bfd_check_format (abfd, bfd_object)
- || bfd_get_flavour (abfd) != bfd_target_elf_flavour
- || elf_tdata (abfd)->build_id == NULL)
- return NULL;
-
- retval = xmalloc (sizeof *retval - 1 + elf_tdata (abfd)->build_id_size);
- retval->size = elf_tdata (abfd)->build_id_size;
- memcpy (retval->data, elf_tdata (abfd)->build_id, retval->size);
-
- return retval;
-}
-
-/* Return if FILENAME has NT_GNU_BUILD_ID matching the CHECK value. */
-
-static int
-build_id_verify (const char *filename, struct build_id *check)
-{
- bfd *abfd;
- struct build_id *found = NULL;
- int retval = 0;
-
- /* We expect to be silent on the non-existing files. */
- if (remote_filename_p (filename))
- abfd = remote_bfd_open (filename, gnutarget);
- else
- abfd = bfd_openr (filename, gnutarget);
- if (abfd == NULL)
- return 0;
-
- found = build_id_bfd_get (abfd);
-
- if (found == NULL)
- warning (_("File \"%s\" has no build-id, file skipped"), filename);
- else if (found->size != check->size
- || memcmp (found->data, check->data, found->size) != 0)
- warning (_("File \"%s\" has a different build-id, file skipped"), filename);
- else
- retval = 1;
-
- if (!bfd_close (abfd))
- warning (_("cannot close \"%s\": %s"), filename,
- bfd_errmsg (bfd_get_error ()));
-
- xfree (found);
-
- return retval;
-}
-
-static char *
-build_id_to_debug_filename (struct build_id *build_id)
-{
- char *link, *s, *retval = NULL;
- gdb_byte *data = build_id->data;
- size_t size = build_id->size;
-
- /* DEBUG_FILE_DIRECTORY/.build-id/ab/cdef */
- link = xmalloc (strlen (debug_file_directory) + (sizeof "/.build-id/" - 1) + 1
- + 2 * size + (sizeof ".debug" - 1) + 1);
- s = link + sprintf (link, "%s/.build-id/", debug_file_directory);
- if (size > 0)
- {
- size--;
- s += sprintf (s, "%02x", (unsigned) *data++);
- }
- if (size > 0)
- *s++ = '/';
- while (size-- > 0)
- s += sprintf (s, "%02x", (unsigned) *data++);
- strcpy (s, ".debug");
-
- /* lrealpath() is expensive even for the usually non-existent files. */
- if (access (link, F_OK) == 0)
- retval = lrealpath (link);
- xfree (link);
-
- if (retval != NULL && !build_id_verify (retval, build_id))
- {
- xfree (retval);
- retval = NULL;
- }
-
- return retval;
-}
-
static char *
get_debug_link_info (struct objfile *objfile, unsigned long *crc32_out)
{
}
static int
-separate_debug_file_exists (const char *name, unsigned long crc)
+separate_debug_file_exists (const char *name, unsigned long crc,
+ struct objfile *parent_objfile)
{
unsigned long file_crc = 0;
bfd *abfd;
gdb_byte buffer[8*1024];
int count;
+ struct stat parent_stat, abfd_stat;
- if (remote_filename_p (name))
- abfd = remote_bfd_open (name, gnutarget);
- else
- abfd = bfd_openr (name, gnutarget);
+ /* Find a separate debug info file as if symbols would be present in
+ PARENT_OBJFILE itself this function would not be called. .gnu_debuglink
+ section can contain just the basename of PARENT_OBJFILE without any
+ ".debug" suffix as "/usr/lib/debug/path/to/file" is a separate tree where
+ the separate debug infos with the same basename can exist. */
+
+ if (strcmp (name, parent_objfile->name) == 0)
+ return 0;
+
+ abfd = bfd_open_maybe_remote (name);
if (!abfd)
return 0;
+ /* Verify symlinks were not the cause of strcmp name difference above.
+
+ Some operating systems, e.g. Windows, do not provide a meaningful
+ st_ino; they always set it to zero. (Windows does provide a
+ meaningful st_dev.) Do not indicate a duplicate library in that
+ case. While there is no guarantee that a system that provides
+ meaningful inode numbers will never set st_ino to zero, this is
+ merely an optimization, so we do not need to worry about false
+ negatives. */
+
+ if (bfd_stat (abfd, &abfd_stat) == 0
+ && bfd_stat (parent_objfile->obfd, &parent_stat) == 0
+ && abfd_stat.st_dev == parent_stat.st_dev
+ && abfd_stat.st_ino == parent_stat.st_ino
+ && abfd_stat.st_ino != 0)
+ {
+ bfd_close (abfd);
+ return 0;
+ }
+
while ((count = bfd_bread (buffer, sizeof (buffer), abfd)) > 0)
file_crc = gnu_debuglink_crc32 (file_crc, buffer, count);
bfd_close (abfd);
- return crc == file_crc;
+ if (crc != file_crc)
+ {
+ warning (_("the debug information found in \"%s\""
+ " does not match \"%s\" (CRC mismatch).\n"),
+ name, parent_objfile->name);
+ return 0;
+ }
+
+ return 1;
}
char *debug_file_directory = NULL;
#define DEBUG_SUBDIRECTORY ".debug"
#endif
-static char *
-find_separate_debug_file (struct objfile *objfile)
+char *
+find_separate_debug_file_by_debuglink (struct objfile *objfile)
{
asection *sect;
- char *basename;
- char *dir;
- char *debugfile;
- char *name_copy;
- char *canon_name;
+ char *basename, *name_copy, *debugdir;
+ char *dir = NULL;
+ char *debugfile = NULL;
+ char *canon_name = NULL;
bfd_size_type debuglink_size;
unsigned long crc32;
int i;
- struct build_id *build_id;
-
- build_id = build_id_bfd_get (objfile->obfd);
- if (build_id != NULL)
- {
- char *build_id_name;
-
- build_id_name = build_id_to_debug_filename (build_id);
- xfree (build_id);
- /* Prevent looping on a stripped .debug file. */
- if (build_id_name != NULL && strcmp (build_id_name, objfile->name) == 0)
- {
- warning (_("\"%s\": separate debug info file has no debug info"),
- build_id_name);
- xfree (build_id_name);
- }
- else if (build_id_name != NULL)
- return build_id_name;
- }
basename = get_debug_link_info (objfile, &crc32);
if (basename == NULL)
- return NULL;
+ /* There's no separate debug info, hence there's no way we could
+ load it => no warning. */
+ goto cleanup_return_debugfile;
dir = xstrdup (objfile->name);
gdb_assert (i >= 0 && IS_DIR_SEPARATOR (dir[i]));
dir[i+1] = '\0';
- debugfile = alloca (strlen (debug_file_directory) + 1
- + strlen (dir)
- + strlen (DEBUG_SUBDIRECTORY)
- + strlen ("/")
- + strlen (basename)
- + 1);
+ /* Set I to max (strlen (canon_name), strlen (dir)). */
+ canon_name = lrealpath (dir);
+ i = strlen (dir);
+ if (canon_name && strlen (canon_name) > i)
+ i = strlen (canon_name);
+
+ debugfile = xmalloc (strlen (debug_file_directory) + 1
+ + i
+ + strlen (DEBUG_SUBDIRECTORY)
+ + strlen ("/")
+ + strlen (basename)
+ + 1);
/* First try in the same directory as the original file. */
strcpy (debugfile, dir);
strcat (debugfile, basename);
- if (separate_debug_file_exists (debugfile, crc32))
- {
- xfree (basename);
- xfree (dir);
- return xstrdup (debugfile);
- }
+ if (separate_debug_file_exists (debugfile, crc32, objfile))
+ goto cleanup_return_debugfile;
/* Then try in the subdirectory named DEBUG_SUBDIRECTORY. */
strcpy (debugfile, dir);
strcat (debugfile, "/");
strcat (debugfile, basename);
- if (separate_debug_file_exists (debugfile, crc32))
- {
- xfree (basename);
- xfree (dir);
- return xstrdup (debugfile);
- }
+ if (separate_debug_file_exists (debugfile, crc32, objfile))
+ goto cleanup_return_debugfile;
- /* Then try in the global debugfile directory. */
- strcpy (debugfile, debug_file_directory);
- strcat (debugfile, "/");
- strcat (debugfile, dir);
- strcat (debugfile, basename);
+ /* Then try in the global debugfile directories.
+
+ Keep backward compatibility so that DEBUG_FILE_DIRECTORY being "" will
+ cause "/..." lookups. */
- if (separate_debug_file_exists (debugfile, crc32))
+ debugdir = debug_file_directory;
+ do
{
- xfree (basename);
- xfree (dir);
- return xstrdup (debugfile);
- }
+ char *debugdir_end;
- /* If the file is in the sysroot, try using its base path in the
- global debugfile directory. */
- canon_name = lrealpath (dir);
- if (canon_name
- && strncmp (canon_name, gdb_sysroot, strlen (gdb_sysroot)) == 0
- && IS_DIR_SEPARATOR (canon_name[strlen (gdb_sysroot)]))
- {
- strcpy (debugfile, debug_file_directory);
- strcat (debugfile, canon_name + strlen (gdb_sysroot));
+ while (*debugdir == DIRNAME_SEPARATOR)
+ debugdir++;
+
+ debugdir_end = strchr (debugdir, DIRNAME_SEPARATOR);
+ if (debugdir_end == NULL)
+ debugdir_end = &debugdir[strlen (debugdir)];
+
+ memcpy (debugfile, debugdir, debugdir_end - debugdir);
+ debugfile[debugdir_end - debugdir] = 0;
strcat (debugfile, "/");
+ strcat (debugfile, dir);
strcat (debugfile, basename);
- if (separate_debug_file_exists (debugfile, crc32))
+ if (separate_debug_file_exists (debugfile, crc32, objfile))
+ goto cleanup_return_debugfile;
+
+ /* If the file is in the sysroot, try using its base path in the
+ global debugfile directory. */
+ if (canon_name
+ && strncmp (canon_name, gdb_sysroot, strlen (gdb_sysroot)) == 0
+ && IS_DIR_SEPARATOR (canon_name[strlen (gdb_sysroot)]))
{
- xfree (canon_name);
- xfree (basename);
- xfree (dir);
- return xstrdup (debugfile);
+ memcpy (debugfile, debugdir, debugdir_end - debugdir);
+ debugfile[debugdir_end - debugdir] = 0;
+ strcat (debugfile, canon_name + strlen (gdb_sysroot));
+ strcat (debugfile, "/");
+ strcat (debugfile, basename);
+
+ if (separate_debug_file_exists (debugfile, crc32, objfile))
+ goto cleanup_return_debugfile;
}
+
+ debugdir = debugdir_end;
}
+ while (*debugdir != 0);
- if (canon_name)
- xfree (canon_name);
+ xfree (debugfile);
+ debugfile = NULL;
+cleanup_return_debugfile:
+ xfree (canon_name);
xfree (basename);
xfree (dir);
- return NULL;
+ return debugfile;
}
}
}
+/* If NAME is a remote name open the file using remote protocol, otherwise
+ open it normally. */
+
+bfd *
+bfd_open_maybe_remote (const char *name)
+{
+ if (remote_filename_p (name))
+ return remote_bfd_open (name, gnutarget);
+ else
+ return bfd_openr (name, gnutarget);
+}
+
+
/* Open the file specified by NAME and hand it off to BFD for
preliminary analysis. Return a newly initialized bfd *, which
includes a newly malloc'd` copy of NAME (tilde-expanded and made
bfd_errmsg (bfd_get_error ()));
}
+ /* bfd_usrdata exists for applications and libbfd must not touch it. */
+ gdb_assert (bfd_usrdata (sym_bfd) == NULL);
+
return sym_bfd;
}
{
/* The write is just starting. Let the user know we've started
this section. */
- ui_out_message (uiout, 0, "Loading section %s, size 0x%s lma 0x%s\n",
- args->section_name, paddr_nz (args->section_size),
- paddr_nz (args->lma));
+ ui_out_message (uiout, 0, "Loading section %s, size %s lma %s\n",
+ args->section_name, hex_string (args->section_size),
+ paddress (target_gdbarch, args->lma));
return;
}
struct cleanup *verify_cleanups = make_cleanup (xfree, check);
if (target_read_memory (args->lma, check, bytes) != 0)
- error (_("Download verify read failed at 0x%s"),
- paddr (args->lma));
+ error (_("Download verify read failed at %s"),
+ paddress (target_gdbarch, args->lma));
if (memcmp (args->buffer, check, bytes) != 0)
- error (_("Download verify compare failed at 0x%s"),
- paddr (args->lma));
+ error (_("Download verify compare failed at %s"),
+ paddress (target_gdbarch, args->lma));
do_cleanups (verify_cleanups);
}
totals->data_count += bytes;
entry = bfd_get_start_address (loadfile_bfd);
ui_out_text (uiout, "Start address ");
- ui_out_field_fmt (uiout, "address", "0x%s", paddr_nz (entry));
+ ui_out_field_fmt (uiout, "address", "%s", paddress (target_gdbarch, entry));
ui_out_text (uiout, ", load size ");
ui_out_field_fmt (uiout, "load-size", "%lu", total_progress.data_count);
ui_out_text (uiout, "\n");
static void
add_symbol_file_command (char *args, int from_tty)
{
+ struct gdbarch *gdbarch = get_current_arch ();
char *filename = NULL;
int flags = OBJF_USERLOADED;
char *arg;
entered on the command line. */
section_addrs->other[sec_num].name = sec;
section_addrs->other[sec_num].addr = addr;
- printf_unfiltered ("\t%s_addr = %s\n", sec, paddress (addr));
+ printf_unfiltered ("\t%s_addr = %s\n", sec,
+ paddress (gdbarch, addr));
sec_num++;
/* The object's sections are initialized when a
for (objfile = object_files; objfile; objfile = objfile->next)
{
- if (objfile->obfd)
- {
+ /* solib-sunos.c creates one objfile with obfd. */
+ if (objfile->obfd == NULL)
+ continue;
+
+ /* Separate debug objfiles are handled in the main objfile. */
+ if (objfile->separate_debug_objfile_backlink)
+ continue;
+
#ifdef DEPRECATED_IBM6000_TARGET
- /* If this object is from a shared library, then you should
- stat on the library name, not member name. */
+ /* If this object is from a shared library, then you should
+ stat on the library name, not member name. */
- if (objfile->obfd->my_archive)
- res = stat (objfile->obfd->my_archive->filename, &new_statbuf);
- else
+ if (objfile->obfd->my_archive)
+ res = stat (objfile->obfd->my_archive->filename, &new_statbuf);
+ else
#endif
- res = stat (objfile->name, &new_statbuf);
- if (res != 0)
+ res = stat (objfile->name, &new_statbuf);
+ if (res != 0)
+ {
+ /* FIXME, should use print_sys_errmsg but it's not filtered. */
+ printf_unfiltered (_("`%s' has disappeared; keeping its symbols.\n"),
+ objfile->name);
+ continue;
+ }
+ new_modtime = new_statbuf.st_mtime;
+ if (new_modtime != objfile->mtime)
+ {
+ struct cleanup *old_cleanups;
+ struct section_offsets *offsets;
+ int num_offsets;
+ char *obfd_filename;
+
+ printf_unfiltered (_("`%s' has changed; re-reading symbols.\n"),
+ objfile->name);
+
+ /* There are various functions like symbol_file_add,
+ symfile_bfd_open, syms_from_objfile, etc., which might
+ appear to do what we want. But they have various other
+ effects which we *don't* want. So we just do stuff
+ ourselves. We don't worry about mapped files (for one thing,
+ any mapped file will be out of date). */
+
+ /* If we get an error, blow away this objfile (not sure if
+ that is the correct response for things like shared
+ libraries). */
+ old_cleanups = make_cleanup_free_objfile (objfile);
+ /* We need to do this whenever any symbols go away. */
+ make_cleanup (clear_symtab_users_cleanup, 0 /*ignore*/);
+
+ if (exec_bfd != NULL && strcmp (bfd_get_filename (objfile->obfd),
+ bfd_get_filename (exec_bfd)) == 0)
{
- /* FIXME, should use print_sys_errmsg but it's not filtered. */
- printf_unfiltered (_("`%s' has disappeared; keeping its symbols.\n"),
- objfile->name);
- continue;
+ /* Reload EXEC_BFD without asking anything. */
+
+ exec_file_attach (bfd_get_filename (objfile->obfd), 0);
}
- new_modtime = new_statbuf.st_mtime;
- if (new_modtime != objfile->mtime)
+
+ /* Clean up any state BFD has sitting around. We don't need
+ to close the descriptor but BFD lacks a way of closing the
+ BFD without closing the descriptor. */
+ obfd_filename = bfd_get_filename (objfile->obfd);
+ if (!bfd_close (objfile->obfd))
+ error (_("Can't close BFD for %s: %s"), objfile->name,
+ bfd_errmsg (bfd_get_error ()));
+ objfile->obfd = bfd_open_maybe_remote (obfd_filename);
+ if (objfile->obfd == NULL)
+ error (_("Can't open %s to read symbols."), objfile->name);
+ else
+ objfile->obfd = gdb_bfd_ref (objfile->obfd);
+ /* bfd_openr sets cacheable to true, which is what we want. */
+ if (!bfd_check_format (objfile->obfd, bfd_object))
+ error (_("Can't read symbols from %s: %s."), objfile->name,
+ bfd_errmsg (bfd_get_error ()));
+
+ /* Save the offsets, we will nuke them with the rest of the
+ objfile_obstack. */
+ num_offsets = objfile->num_sections;
+ offsets = ((struct section_offsets *)
+ alloca (SIZEOF_N_SECTION_OFFSETS (num_offsets)));
+ memcpy (offsets, objfile->section_offsets,
+ SIZEOF_N_SECTION_OFFSETS (num_offsets));
+
+ /* Remove any references to this objfile in the global
+ value lists. */
+ preserve_values (objfile);
+
+ /* Nuke all the state that we will re-read. Much of the following
+ code which sets things to NULL really is necessary to tell
+ other parts of GDB that there is nothing currently there.
+
+ Try to keep the freeing order compatible with free_objfile. */
+
+ if (objfile->sf != NULL)
{
- struct cleanup *old_cleanups;
- struct section_offsets *offsets;
- int num_offsets;
- char *obfd_filename;
-
- printf_unfiltered (_("`%s' has changed; re-reading symbols.\n"),
- objfile->name);
-
- /* There are various functions like symbol_file_add,
- symfile_bfd_open, syms_from_objfile, etc., which might
- appear to do what we want. But they have various other
- effects which we *don't* want. So we just do stuff
- ourselves. We don't worry about mapped files (for one thing,
- any mapped file will be out of date). */
-
- /* If we get an error, blow away this objfile (not sure if
- that is the correct response for things like shared
- libraries). */
- old_cleanups = make_cleanup_free_objfile (objfile);
- /* We need to do this whenever any symbols go away. */
- make_cleanup (clear_symtab_users_cleanup, 0 /*ignore*/);
-
- if (exec_bfd != NULL && strcmp (bfd_get_filename (objfile->obfd),
- bfd_get_filename (exec_bfd)) == 0)
- {
- /* Reload EXEC_BFD without asking anything. */
+ (*objfile->sf->sym_finish) (objfile);
+ }
- exec_file_attach (bfd_get_filename (objfile->obfd), 0);
- }
+ clear_objfile_data (objfile);
- /* Clean up any state BFD has sitting around. We don't need
- to close the descriptor but BFD lacks a way of closing the
- BFD without closing the descriptor. */
- obfd_filename = bfd_get_filename (objfile->obfd);
- if (!bfd_close (objfile->obfd))
- error (_("Can't close BFD for %s: %s"), objfile->name,
- bfd_errmsg (bfd_get_error ()));
- if (remote_filename_p (obfd_filename))
- objfile->obfd = remote_bfd_open (obfd_filename, gnutarget);
- else
- objfile->obfd = bfd_openr (obfd_filename, gnutarget);
- if (objfile->obfd == NULL)
- error (_("Can't open %s to read symbols."), objfile->name);
- /* bfd_openr sets cacheable to true, which is what we want. */
- if (!bfd_check_format (objfile->obfd, bfd_object))
- error (_("Can't read symbols from %s: %s."), objfile->name,
- bfd_errmsg (bfd_get_error ()));
-
- /* Save the offsets, we will nuke them with the rest of the
- objfile_obstack. */
- num_offsets = objfile->num_sections;
- offsets = ((struct section_offsets *)
- alloca (SIZEOF_N_SECTION_OFFSETS (num_offsets)));
- memcpy (offsets, objfile->section_offsets,
- SIZEOF_N_SECTION_OFFSETS (num_offsets));
-
- /* Remove any references to this objfile in the global
- value lists. */
- preserve_values (objfile);
-
- /* Nuke all the state that we will re-read. Much of the following
- code which sets things to NULL really is necessary to tell
- other parts of GDB that there is nothing currently there. */
-
- /* FIXME: Do we have to free a whole linked list, or is this
- enough? */
- if (objfile->global_psymbols.list)
- xfree (objfile->global_psymbols.list);
- memset (&objfile->global_psymbols, 0,
- sizeof (objfile->global_psymbols));
- if (objfile->static_psymbols.list)
- xfree (objfile->static_psymbols.list);
- memset (&objfile->static_psymbols, 0,
- sizeof (objfile->static_psymbols));
-
- /* Free the obstacks for non-reusable objfiles */
- bcache_xfree (objfile->psymbol_cache);
- objfile->psymbol_cache = bcache_xmalloc ();
- bcache_xfree (objfile->macro_cache);
- objfile->macro_cache = bcache_xmalloc ();
- if (objfile->demangled_names_hash != NULL)
- {
- htab_delete (objfile->demangled_names_hash);
- objfile->demangled_names_hash = NULL;
- }
- obstack_free (&objfile->objfile_obstack, 0);
- objfile->sections = NULL;
- objfile->symtabs = NULL;
- objfile->psymtabs = NULL;
- objfile->psymtabs_addrmap = NULL;
- objfile->free_psymtabs = NULL;
- objfile->cp_namespace_symtab = NULL;
- objfile->msymbols = NULL;
- objfile->deprecated_sym_private = NULL;
- objfile->minimal_symbol_count = 0;
- memset (&objfile->msymbol_hash, 0,
- sizeof (objfile->msymbol_hash));
- memset (&objfile->msymbol_demangled_hash, 0,
- sizeof (objfile->msymbol_demangled_hash));
- clear_objfile_data (objfile);
- if (objfile->sf != NULL)
- {
- (*objfile->sf->sym_finish) (objfile);
- }
+ /* Free the separate debug objfile if there is one. It will be
+ automatically recreated by sym_read. */
+ if (objfile->separate_debug_objfile)
+ {
+ /* Note: no need to clear separate_debug_objfile field as it is
+ done by free_objfile. */
+ free_objfile (objfile->separate_debug_objfile);
+ }
- objfile->psymbol_cache = bcache_xmalloc ();
- objfile->macro_cache = bcache_xmalloc ();
- /* obstack_init also initializes the obstack so it is
- empty. We could use obstack_specify_allocation but
- gdb_obstack.h specifies the alloc/dealloc
- functions. */
- obstack_init (&objfile->objfile_obstack);
- if (build_objfile_section_table (objfile))
- {
- error (_("Can't find the file sections in `%s': %s"),
- objfile->name, bfd_errmsg (bfd_get_error ()));
- }
- terminate_minimal_symbol_table (objfile);
-
- /* We use the same section offsets as from last time. I'm not
- sure whether that is always correct for shared libraries. */
- objfile->section_offsets = (struct section_offsets *)
- obstack_alloc (&objfile->objfile_obstack,
- SIZEOF_N_SECTION_OFFSETS (num_offsets));
- memcpy (objfile->section_offsets, offsets,
- SIZEOF_N_SECTION_OFFSETS (num_offsets));
- objfile->num_sections = num_offsets;
-
- /* What the hell is sym_new_init for, anyway? The concept of
- distinguishing between the main file and additional files
- in this way seems rather dubious. */
- if (objfile == symfile_objfile)
- {
- (*objfile->sf->sym_new_init) (objfile);
- }
+ /* FIXME: Do we have to free a whole linked list, or is this
+ enough? */
+ if (objfile->global_psymbols.list)
+ xfree (objfile->global_psymbols.list);
+ memset (&objfile->global_psymbols, 0,
+ sizeof (objfile->global_psymbols));
+ if (objfile->static_psymbols.list)
+ xfree (objfile->static_psymbols.list);
+ memset (&objfile->static_psymbols, 0,
+ sizeof (objfile->static_psymbols));
+
+ /* Free the obstacks for non-reusable objfiles */
+ bcache_xfree (objfile->psymbol_cache);
+ objfile->psymbol_cache = bcache_xmalloc ();
+ bcache_xfree (objfile->macro_cache);
+ objfile->macro_cache = bcache_xmalloc ();
+ bcache_xfree (objfile->filename_cache);
+ objfile->filename_cache = bcache_xmalloc ();
+ if (objfile->demangled_names_hash != NULL)
+ {
+ htab_delete (objfile->demangled_names_hash);
+ objfile->demangled_names_hash = NULL;
+ }
+ obstack_free (&objfile->objfile_obstack, 0);
+ objfile->sections = NULL;
+ objfile->symtabs = NULL;
+ objfile->psymtabs = NULL;
+ objfile->psymtabs_addrmap = NULL;
+ objfile->free_psymtabs = NULL;
+ objfile->cp_namespace_symtab = NULL;
+ objfile->msymbols = NULL;
+ objfile->deprecated_sym_private = NULL;
+ objfile->minimal_symbol_count = 0;
+ memset (&objfile->msymbol_hash, 0,
+ sizeof (objfile->msymbol_hash));
+ memset (&objfile->msymbol_demangled_hash, 0,
+ sizeof (objfile->msymbol_demangled_hash));
+
+ objfile->psymbol_cache = bcache_xmalloc ();
+ objfile->macro_cache = bcache_xmalloc ();
+ objfile->filename_cache = bcache_xmalloc ();
+ /* obstack_init also initializes the obstack so it is
+ empty. We could use obstack_specify_allocation but
+ gdb_obstack.h specifies the alloc/dealloc
+ functions. */
+ obstack_init (&objfile->objfile_obstack);
+ if (build_objfile_section_table (objfile))
+ {
+ error (_("Can't find the file sections in `%s': %s"),
+ objfile->name, bfd_errmsg (bfd_get_error ()));
+ }
+ terminate_minimal_symbol_table (objfile);
+
+ /* We use the same section offsets as from last time. I'm not
+ sure whether that is always correct for shared libraries. */
+ objfile->section_offsets = (struct section_offsets *)
+ obstack_alloc (&objfile->objfile_obstack,
+ SIZEOF_N_SECTION_OFFSETS (num_offsets));
+ memcpy (objfile->section_offsets, offsets,
+ SIZEOF_N_SECTION_OFFSETS (num_offsets));
+ objfile->num_sections = num_offsets;
+
+ /* What the hell is sym_new_init for, anyway? The concept of
+ distinguishing between the main file and additional files
+ in this way seems rather dubious. */
+ if (objfile == symfile_objfile)
+ {
+ (*objfile->sf->sym_new_init) (objfile);
+ }
- (*objfile->sf->sym_init) (objfile);
- clear_complaints (&symfile_complaints, 1, 1);
- /* The "mainline" parameter is a hideous hack; I think leaving it
- zero is OK since dbxread.c also does what it needs to do if
- objfile->global_psymbols.size is 0. */
- (*objfile->sf->sym_read) (objfile, 0);
- if (!have_partial_symbols () && !have_full_symbols ())
- {
- wrap_here ("");
- printf_unfiltered (_("(no debugging symbols found)\n"));
- wrap_here ("");
- }
+ (*objfile->sf->sym_init) (objfile);
+ clear_complaints (&symfile_complaints, 1, 1);
+ /* Do not set flags as this is safe and we don't want to be
+ verbose. */
+ (*objfile->sf->sym_read) (objfile, 0);
+ if (!objfile_has_symbols (objfile))
+ {
+ wrap_here ("");
+ printf_unfiltered (_("(no debugging symbols found)\n"));
+ wrap_here ("");
+ }
- /* We're done reading the symbol file; finish off complaints. */
- clear_complaints (&symfile_complaints, 0, 1);
+ /* We're done reading the symbol file; finish off complaints. */
+ clear_complaints (&symfile_complaints, 0, 1);
- /* Getting new symbols may change our opinion about what is
- frameless. */
+ /* Getting new symbols may change our opinion about what is
+ frameless. */
- reinit_frame_cache ();
+ reinit_frame_cache ();
- /* Discard cleanups as symbol reading was successful. */
- discard_cleanups (old_cleanups);
+ /* Discard cleanups as symbol reading was successful. */
+ discard_cleanups (old_cleanups);
- /* If the mtime has changed between the time we set new_modtime
- and now, we *want* this to be out of date, so don't call stat
- again now. */
- objfile->mtime = new_modtime;
- reread_one = 1;
- reread_separate_symbols (objfile);
- init_entry_point_info (objfile);
- }
+ /* If the mtime has changed between the time we set new_modtime
+ and now, we *want* this to be out of date, so don't call stat
+ again now. */
+ objfile->mtime = new_modtime;
+ reread_one = 1;
+ init_entry_point_info (objfile);
}
}
if (reread_one)
{
+ /* Notify objfiles that we've modified objfile sections. */
+ objfiles_changed ();
+
clear_symtab_users ();
/* At least one objfile has changed, so we can consider that
the executable we're debugging has changed too. */
observer_notify_executable_changed ();
}
-
}
-
-
-/* Handle separate debug info for OBJFILE, which has just been
- re-read:
- - If we had separate debug info before, but now we don't, get rid
- of the separated objfile.
- - If we didn't have separated debug info before, but now we do,
- read in the new separated debug info file.
- - If the debug link points to a different file, toss the old one
- and read the new one.
- This function does *not* handle the case where objfile is still
- using the same separate debug info file, but that file's timestamp
- has changed. That case should be handled by the loop in
- reread_symbols already. */
-static void
-reread_separate_symbols (struct objfile *objfile)
-{
- char *debug_file;
- unsigned long crc32;
-
- /* Does the updated objfile's debug info live in a
- separate file? */
- debug_file = find_separate_debug_file (objfile);
-
- if (objfile->separate_debug_objfile)
- {
- /* There are two cases where we need to get rid of
- the old separated debug info objfile:
- - if the new primary objfile doesn't have
- separated debug info, or
- - if the new primary objfile has separate debug
- info, but it's under a different filename.
-
- If the old and new objfiles both have separate
- debug info, under the same filename, then we're
- okay --- if the separated file's contents have
- changed, we will have caught that when we
- visited it in this function's outermost
- loop. */
- if (! debug_file
- || strcmp (debug_file, objfile->separate_debug_objfile->name) != 0)
- free_objfile (objfile->separate_debug_objfile);
- }
-
- /* If the new objfile has separate debug info, and we
- haven't loaded it already, do so now. */
- if (debug_file
- && ! objfile->separate_debug_objfile)
- {
- /* Use the same section offset table as objfile itself.
- Preserve the flags from objfile that make sense. */
- objfile->separate_debug_objfile
- = (symbol_file_add_with_addrs_or_offsets
- (symfile_bfd_open (debug_file),
- info_verbose ? SYMFILE_VERBOSE : 0,
- 0, /* No addr table. */
- objfile->section_offsets, objfile->num_sections,
- objfile->flags & (OBJF_REORDERED | OBJF_SHARED | OBJF_READNOW
- | OBJF_USERLOADED)));
- objfile->separate_debug_objfile->separate_debug_objfile_backlink
- = objfile;
- }
- if (debug_file)
- xfree (debug_file);
-}
-
-
\f
symtab = (struct symtab *)
obstack_alloc (&objfile->objfile_obstack, sizeof (struct symtab));
memset (symtab, 0, sizeof (*symtab));
- symtab->filename = obsavestring (filename, strlen (filename),
- &objfile->objfile_obstack);
+ symtab->filename = (char *) bcache (filename, strlen (filename) + 1,
+ objfile->filename_cache);
symtab->fullname = NULL;
symtab->language = deduce_language_from_filename (filename);
- symtab->debugformat = obsavestring ("unknown", 7,
- &objfile->objfile_obstack);
+ symtab->debugformat = "unknown";
/* Hook it to the objfile it comes from */
}
struct partial_symtab *
-allocate_psymtab (char *filename, struct objfile *objfile)
+allocate_psymtab (const char *filename, struct objfile *objfile)
{
struct partial_symtab *psymtab;
sizeof (struct partial_symtab));
memset (psymtab, 0, sizeof (struct partial_symtab));
- psymtab->filename = obsavestring (filename, strlen (filename),
- &objfile->objfile_obstack);
+ psymtab->filename = (char *) bcache (filename, strlen (filename) + 1,
+ objfile->filename_cache);
psymtab->symtab = NULL;
/* Prepend it to the psymtab list for the objfile it belongs to.
clear_displays ();
breakpoint_re_set ();
- set_default_breakpoint (0, 0, 0, 0);
+ set_default_breakpoint (0, NULL, 0, 0, 0);
clear_pc_function_cache ();
observer_notify_new_objfile (NULL);
struct partial_symtab *
start_psymtab_common (struct objfile *objfile,
- struct section_offsets *section_offsets, char *filename,
+ struct section_offsets *section_offsets,
+ const char *filename,
CORE_ADDR textlow, struct partial_symbol **global_syms,
struct partial_symbol **static_syms)
{
different domain (or address) is possible and correct. */
static const struct partial_symbol *
-add_psymbol_to_bcache (char *name, int namelength, domain_enum domain,
+add_psymbol_to_bcache (char *name, int namelength, int copy_name,
+ domain_enum domain,
enum address_class class,
long val, /* Value as a long */
CORE_ADDR coreaddr, /* Value as a CORE_ADDR */
enum language language, struct objfile *objfile,
int *added)
{
- char *buf = name;
/* psymbol is static so that there will be no uninitialized gaps in the
structure which might contain random data, causing cache misses in
bcache. */
static struct partial_symbol psymbol;
-
- if (name[namelength] != '\0')
- {
- buf = alloca (namelength + 1);
- /* Create local copy of the partial symbol */
- memcpy (buf, name, namelength);
- buf[namelength] = '\0';
- }
+
+ /* However, we must ensure that the entire 'value' field has been
+ zeroed before assigning to it, because an assignment may not
+ write the entire field. */
+ memset (&psymbol.ginfo.value, 0, sizeof (psymbol.ginfo.value));
/* val and coreaddr are mutually exclusive, one of them *will* be zero */
if (val != 0)
{
PSYMBOL_DOMAIN (&psymbol) = domain;
PSYMBOL_CLASS (&psymbol) = class;
- SYMBOL_SET_NAMES (&psymbol, buf, namelength, objfile);
+ SYMBOL_SET_NAMES (&psymbol, name, namelength, copy_name, objfile);
/* Stash the partial symbol away in the cache */
return bcache_full (&psymbol, sizeof (struct partial_symbol),
cache. */
const struct partial_symbol *
-add_psymbol_to_list (char *name, int namelength, domain_enum domain,
+add_psymbol_to_list (char *name, int namelength, int copy_name,
+ domain_enum domain,
enum address_class class,
struct psymbol_allocation_list *list,
long val, /* Value as a long */
int added;
/* Stash the partial symbol away in the cache */
- psym = add_psymbol_to_bcache (name, namelength, domain, class,
+ psym = add_psymbol_to_bcache (name, namelength, copy_name, domain, class,
val, coreaddr, language, objfile, &added);
/* Do not duplicate global partial symbols. */
ALL_OBJSECTIONS (objfile, osect)
if (section_is_mapped (osect))
{
+ struct gdbarch *gdbarch = get_objfile_arch (objfile);
const char *name;
bfd_vma lma, vma;
int size;
name = bfd_section_name (objfile->obfd, osect->the_bfd_section);
printf_filtered ("Section %s, loaded at ", name);
- fputs_filtered (paddress (lma), gdb_stdout);
+ fputs_filtered (paddress (gdbarch, lma), gdb_stdout);
puts_filtered (" - ");
- fputs_filtered (paddress (lma + size), gdb_stdout);
+ fputs_filtered (paddress (gdbarch, lma + size), gdb_stdout);
printf_filtered (", mapped at ");
- fputs_filtered (paddress (vma), gdb_stdout);
+ fputs_filtered (paddress (gdbarch, vma), gdb_stdout);
puts_filtered (" - ");
- fputs_filtered (paddress (vma + size), gdb_stdout);
+ fputs_filtered (paddress (gdbarch, vma + size), gdb_stdout);
puts_filtered ("\n");
nmapped++;
static void
overlay_load_command (char *args, int from_tty)
{
- if (gdbarch_overlay_update_p (current_gdbarch))
- gdbarch_overlay_update (current_gdbarch, NULL);
+ struct gdbarch *gdbarch = get_current_arch ();
+
+ if (gdbarch_overlay_update_p (gdbarch))
+ gdbarch_overlay_update (gdbarch, NULL);
else
error (_("This target does not know how to read its overlay state."));
}
Convert to host order. int LEN is number of ints */
static void
read_target_long_array (CORE_ADDR memaddr, unsigned int *myaddr,
- int len, int size)
+ int len, int size, enum bfd_endian byte_order)
{
/* FIXME (alloca): Not safe if array is very large. */
gdb_byte *buf = alloca (len * size);
read_memory (memaddr, buf, len * size);
for (i = 0; i < len; i++)
- myaddr[i] = extract_unsigned_integer (size * i + buf, size);
+ myaddr[i] = extract_unsigned_integer (size * i + buf, size, byte_order);
}
/* Find and grab a copy of the target _ovly_table
struct minimal_symbol *novlys_msym, *ovly_table_msym;
struct gdbarch *gdbarch;
int word_size;
+ enum bfd_endian byte_order;
simple_free_overlay_table ();
novlys_msym = lookup_minimal_symbol ("_novlys", NULL, NULL);
gdbarch = get_objfile_arch (msymbol_objfile (ovly_table_msym));
word_size = gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT;
+ byte_order = gdbarch_byte_order (gdbarch);
- cache_novlys = read_memory_integer (SYMBOL_VALUE_ADDRESS (novlys_msym), 4);
+ cache_novlys = read_memory_integer (SYMBOL_VALUE_ADDRESS (novlys_msym),
+ 4, byte_order);
cache_ovly_table
= (void *) xmalloc (cache_novlys * sizeof (*cache_ovly_table));
cache_ovly_table_base = SYMBOL_VALUE_ADDRESS (ovly_table_msym);
read_target_long_array (cache_ovly_table_base,
(unsigned int *) cache_ovly_table,
- cache_novlys * 4, word_size);
+ cache_novlys * 4, word_size, byte_order);
return 1; /* SUCCESS */
}
simple_read_overlay_region_table (void)
{
struct minimal_symbol *msym;
+ struct gdbarch *gdbarch;
+ int word_size;
+ enum bfd_endian byte_order;
simple_free_overlay_region_table ();
msym = lookup_minimal_symbol ("_novly_regions", NULL, NULL);
- if (msym != NULL)
- cache_novly_regions = read_memory_integer (SYMBOL_VALUE_ADDRESS (msym), 4);
- else
+ if (msym == NULL)
return 0; /* failure */
+
+ gdbarch = get_objfile_arch (msymbol_objfile (msym));
+ word_size = gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT;
+ byte_order = gdbarch_byte_order (gdbarch);
+
+ cache_novly_regions = read_memory_integer (SYMBOL_VALUE_ADDRESS (msym),
+ 4, byte_order);
+
cache_ovly_region_table = (void *) xmalloc (cache_novly_regions * 12);
if (cache_ovly_region_table != NULL)
{
msym = lookup_minimal_symbol ("_ovly_region_table", NULL, NULL);
if (msym != NULL)
{
- struct gdbarch *gdbarch = get_objfile_arch (msymbol_objfile (msym));
- int word_size = gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT;
cache_ovly_region_table_base = SYMBOL_VALUE_ADDRESS (msym);
read_target_long_array (cache_ovly_region_table_base,
(unsigned int *) cache_ovly_region_table,
- cache_novly_regions * 3, word_size);
+ cache_novly_regions * 3,
+ word_size, byte_order);
}
else
return 0; /* failure */
asection *bsect = osect->the_bfd_section;
struct gdbarch *gdbarch = get_objfile_arch (osect->objfile);
int word_size = gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT;
+ enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
size = bfd_get_section_size (osect->the_bfd_section);
for (i = 0; i < cache_novlys; i++)
{
read_target_long_array (cache_ovly_table_base + i * word_size,
(unsigned int *) cache_ovly_table[i],
- 4, word_size);
+ 4, word_size, byte_order);
if (cache_ovly_table[i][VMA] == bfd_section_vma (obfd, bsect)
&& cache_ovly_table[i][LMA] == bfd_section_lma (obfd, bsect)
/* && cache_ovly_table[i][SIZE] == size */ )
add_setshow_optional_filename_cmd ("debug-file-directory", class_support,
&debug_file_directory, _("\
-Set the directory where separate debug symbols are searched for."), _("\
-Show the directory where separate debug symbols are searched for."), _("\
+Set the directories where separate debug symbols are searched for."), _("\
+Show the directories where separate debug symbols are searched for."), _("\
Separate debug symbols are first searched for in the same\n\
directory as the binary, then in the `" DEBUG_SUBDIRECTORY "' subdirectory,\n\
and lastly at the path of the directory of the binary with\n\
-the global debug-file directory prepended."),
+each global debug-file-directory component prepended."),
NULL,
show_debug_file_directory,
&setlist, &showlist);
-
- add_setshow_boolean_cmd ("symbol-loading", no_class,
- &print_symbol_loading, _("\
-Set printing of symbol loading messages."), _("\
-Show printing of symbol loading messages."), NULL,
- NULL,
- NULL,
- &setprintlist, &showprintlist);
}
projects / deliverable / binutils-gdb.git / blobdiff