/* Generic symbol file reading for the GNU debugger, GDB.
- Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001 Free Software Foundation, Inc.
+
+ Copyright 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
+ 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+
Contributed by Cygnus Support, using pieces from other GDB modules.
This file is part of GDB.
Boston, MA 02111-1307, USA. */
#include "defs.h"
+#include "bfdlink.h"
#include "symtab.h"
#include "gdbtypes.h"
#include "gdbcore.h"
#include "value.h"
#include "symfile.h"
#include "objfiles.h"
+#include "source.h"
#include "gdbcmd.h"
#include "breakpoint.h"
#include "language.h"
#include "complaints.h"
#include "demangle.h"
#include "inferior.h" /* for write_pc */
+#include "filenames.h" /* for DOSish file names */
#include "gdb-stabs.h"
-#include "obstack.h"
+#include "gdb_obstack.h"
#include "completer.h"
+#include "bcache.h"
+#include "hashtab.h"
+#include "readline/readline.h"
+#include "gdb_assert.h"
+#include "block.h"
#include <sys/types.h>
#include <fcntl.h>
#define O_BINARY 0
#endif
-#ifdef HPUXHPPA
-
-/* Some HP-UX related globals to clear when a new "main"
- symbol file is loaded. HP-specific. */
-
-extern int hp_som_som_object_present;
-extern int hp_cxx_exception_support_initialized;
-#define RESET_HP_UX_GLOBALS() do {\
- hp_som_som_object_present = 0; /* indicates HP-compiled code */ \
- hp_cxx_exception_support_initialized = 0; /* must reinitialize exception stuff */ \
- } while (0)
-#endif
-
-int (*ui_load_progress_hook) (const char *section, unsigned long num);
-void (*show_load_progress) (const char *section,
- unsigned long section_sent,
- unsigned long section_size,
- unsigned long total_sent,
+int (*deprecated_ui_load_progress_hook) (const char *section, unsigned long num);
+void (*deprecated_show_load_progress) (const char *section,
+ unsigned long section_sent,
+ unsigned long section_size,
+ unsigned long total_sent,
unsigned long total_size);
-void (*pre_add_symbol_hook) (char *);
-void (*post_add_symbol_hook) (void);
-void (*target_new_objfile_hook) (struct objfile *);
+void (*deprecated_pre_add_symbol_hook) (const char *);
+void (*deprecated_post_add_symbol_hook) (void);
+void (*deprecated_target_new_objfile_hook) (struct objfile *);
static void clear_symtab_users_cleanup (void *ignore);
/* Global variables owned by this file */
int readnow_symbol_files; /* Read full symbols immediately */
-struct complaint oldsyms_complaint =
-{
- "Replacing old symbols for `%s'", 0, 0
-};
-
-struct complaint empty_symtab_complaint =
-{
- "Empty symbol table found for `%s'", 0, 0
-};
-
-struct complaint unknown_option_complaint =
-{
- "Unknown option `%s' ignored", 0, 0
-};
-
/* External variables and functions referenced. */
extern void report_transfer_performance (unsigned long, time_t, time_t);
static void add_shared_symbol_files_command (char *, int);
+static void reread_separate_symbols (struct objfile *objfile);
+
static void cashier_psymtab (struct partial_symtab *);
bfd *symfile_bfd_open (char *);
+int get_section_index (struct objfile *, char *);
+
static void find_sym_fns (struct objfile *);
static void decrement_reading_symtab (void *);
static void info_ext_lang_command (char *args, int from_tty);
+static char *find_separate_debug_file (struct objfile *objfile);
+
static void init_filename_language_table (void);
void _initialize_symfile (void);
int auto_solib_limit;
\f
-/* Since this function is called from within qsort, in an ANSI environment
- it must conform to the prototype for qsort, which specifies that the
- comparison function takes two "void *" pointers. */
-
-static int
-compare_symbols (const void *s1p, const void *s2p)
-{
- register struct symbol **s1, **s2;
-
- s1 = (struct symbol **) s1p;
- s2 = (struct symbol **) s2p;
- return (strcmp (SYMBOL_SOURCE_NAME (*s1), SYMBOL_SOURCE_NAME (*s2)));
-}
-
-/*
-
- LOCAL FUNCTION
-
- compare_psymbols -- compare two partial symbols by name
-
- DESCRIPTION
-
- Given pointers to pointers to two partial symbol table entries,
- compare them by name and return -N, 0, or +N (ala strcmp).
- Typically used by sorting routines like qsort().
-
- NOTES
-
- Does direct compare of first two characters before punting
- and passing to strcmp for longer compares. Note that the
- original version had a bug whereby two null strings or two
- identically named one character strings would return the
- comparison of memory following the null byte.
-
- */
+/* This compares two partial symbols by names, using strcmp_iw_ordered
+ for the comparison. */
static int
compare_psymbols (const void *s1p, const void *s2p)
{
- register struct partial_symbol **s1, **s2;
- register char *st1, *st2;
-
- s1 = (struct partial_symbol **) s1p;
- s2 = (struct partial_symbol **) s2p;
- st1 = SYMBOL_SOURCE_NAME (*s1);
- st2 = SYMBOL_SOURCE_NAME (*s2);
+ struct partial_symbol *const *s1 = s1p;
+ struct partial_symbol *const *s2 = s2p;
-
- if ((st1[0] - st2[0]) || !st1[0])
- {
- return (st1[0] - st2[0]);
- }
- else if ((st1[1] - st2[1]) || !st1[1])
- {
- return (st1[1] - st2[1]);
- }
- else
- {
- return (strcmp (st1, st2));
- }
+ return strcmp_iw_ordered (SYMBOL_SEARCH_NAME (*s1),
+ SYMBOL_SEARCH_NAME (*s2));
}
void
compare_psymbols);
}
-/* Call sort_block_syms to sort alphabetically the symbols of one block. */
-
-void
-sort_block_syms (register struct block *b)
-{
- qsort (&BLOCK_SYM (b, 0), BLOCK_NSYMS (b),
- sizeof (struct symbol *), compare_symbols);
-}
-
-/* Call sort_symtab_syms to sort alphabetically
- the symbols of each block of one symtab. */
-
-void
-sort_symtab_syms (register struct symtab *s)
-{
- register struct blockvector *bv;
- int nbl;
- int i;
- register struct block *b;
-
- if (s == 0)
- return;
- bv = BLOCKVECTOR (s);
- nbl = BLOCKVECTOR_NBLOCKS (bv);
- for (i = 0; i < nbl; i++)
- {
- b = BLOCKVECTOR_BLOCK (bv, i);
- if (BLOCK_SHOULD_SORT (b))
- sort_block_syms (b);
- }
-}
-
/* Make a null terminated copy of the string at PTR with SIZE characters in
the obstack pointed to by OBSTACKP . Returns the address of the copy.
Note that the string at PTR does not have to be null terminated, I.E. it
may be part of a larger string and we are only saving a substring. */
char *
-obsavestring (char *ptr, int size, struct obstack *obstackp)
+obsavestring (const char *ptr, int size, struct obstack *obstackp)
{
- register char *p = (char *) obstack_alloc (obstackp, size + 1);
+ char *p = (char *) obstack_alloc (obstackp, size + 1);
/* Open-coded memcpy--saves function call time. These strings are usually
short. FIXME: Is this really still true with a compiler that can
inline memcpy? */
{
- register char *p1 = ptr;
- register char *p2 = p;
- char *end = ptr + size;
+ const char *p1 = ptr;
+ char *p2 = p;
+ const char *end = ptr + size;
while (p1 != end)
*p2++ = *p1++;
}
obconcat (struct obstack *obstackp, const char *s1, const char *s2,
const char *s3)
{
- register int len = strlen (s1) + strlen (s2) + strlen (s3) + 1;
- register char *val = (char *) obstack_alloc (obstackp, len);
+ int len = strlen (s1) + strlen (s2) + strlen (s3) + 1;
+ char *val = (char *) obstack_alloc (obstackp, len);
strcpy (val, s1);
strcat (val, s2);
strcat (val, s3);
case inline. */
struct symtab *
-psymtab_to_symtab (register struct partial_symtab *pst)
+psymtab_to_symtab (struct partial_symtab *pst)
{
/* If it's been looked up before, return it. */
if (pst->symtab)
return pst->symtab;
}
-/* Initialize entry point information for this objfile. */
-
-void
-init_entry_point_info (struct objfile *objfile)
-{
- /* Save startup file's range of PC addresses to help blockframe.c
- decide where the bottom of the stack is. */
-
- if (bfd_get_file_flags (objfile->obfd) & EXEC_P)
- {
- /* Executable file -- record its entry point so we'll recognize
- the startup file because it contains the entry point. */
- objfile->ei.entry_point = bfd_get_start_address (objfile->obfd);
- }
- else
- {
- /* Examination of non-executable.o files. Short-circuit this stuff. */
- objfile->ei.entry_point = INVALID_ENTRY_POINT;
- }
- objfile->ei.entry_file_lowpc = INVALID_ENTRY_LOWPC;
- objfile->ei.entry_file_highpc = INVALID_ENTRY_HIGHPC;
- objfile->ei.entry_func_lowpc = INVALID_ENTRY_LOWPC;
- objfile->ei.entry_func_highpc = INVALID_ENTRY_HIGHPC;
- objfile->ei.main_func_lowpc = INVALID_ENTRY_LOWPC;
- objfile->ei.main_func_highpc = INVALID_ENTRY_HIGHPC;
-}
-
-/* Get current entry point address. */
-
-CORE_ADDR
-entry_point_address (void)
-{
- return symfile_objfile ? symfile_objfile->ei.entry_point : 0;
-}
-
-/* Remember the lowest-addressed loadable section we've seen.
- This function is called via bfd_map_over_sections.
+/* Remember the lowest-addressed loadable section we've seen.
+ This function is called via bfd_map_over_sections.
In case of equal vmas, the section with the largest size becomes the
lowest-addressed loadable section.
lowest-addressed loadable section. */
void
-find_lowest_section (bfd *abfd, asection *sect, PTR obj)
+find_lowest_section (bfd *abfd, asection *sect, void *obj)
{
asection **lowest = (asection **) obj;
*lowest = sect;
}
+/* Create a new section_addr_info, with room for NUM_SECTIONS. */
+
+struct section_addr_info *
+alloc_section_addr_info (size_t num_sections)
+{
+ struct section_addr_info *sap;
+ size_t size;
+
+ size = (sizeof (struct section_addr_info)
+ + sizeof (struct other_sections) * (num_sections - 1));
+ sap = (struct section_addr_info *) xmalloc (size);
+ memset (sap, 0, size);
+ sap->num_sections = num_sections;
+
+ return sap;
+}
+
+
+/* Return a freshly allocated copy of ADDRS. The section names, if
+ any, are also freshly allocated copies of those in ADDRS. */
+struct section_addr_info *
+copy_section_addr_info (struct section_addr_info *addrs)
+{
+ struct section_addr_info *copy
+ = alloc_section_addr_info (addrs->num_sections);
+ int i;
+
+ copy->num_sections = addrs->num_sections;
+ for (i = 0; i < addrs->num_sections; i++)
+ {
+ copy->other[i].addr = addrs->other[i].addr;
+ if (addrs->other[i].name)
+ copy->other[i].name = xstrdup (addrs->other[i].name);
+ else
+ copy->other[i].name = NULL;
+ copy->other[i].sectindex = addrs->other[i].sectindex;
+ }
+
+ return copy;
+}
+
+
/* Build (allocate and populate) a section_addr_info struct from
an existing section table. */
const struct section_table *stp;
int oidx;
- sap = xmalloc (sizeof (struct section_addr_info));
- memset (sap, 0, sizeof (struct section_addr_info));
+ sap = alloc_section_addr_info (end - start);
for (stp = start, oidx = 0; stp != end; stp++)
{
- if (stp->the_bfd_section->flags & (SEC_ALLOC | SEC_LOAD)
- && oidx < MAX_SECTIONS)
+ if (bfd_get_section_flags (stp->bfd,
+ stp->the_bfd_section) & (SEC_ALLOC | SEC_LOAD)
+ && oidx < end - start)
{
sap->other[oidx].addr = stp->addr;
- sap->other[oidx].name = xstrdup (stp->the_bfd_section->name);
+ sap->other[oidx].name
+ = xstrdup (bfd_section_name (stp->bfd, stp->the_bfd_section));
sap->other[oidx].sectindex = stp->the_bfd_section->index;
oidx++;
}
{
int idx;
- for (idx = 0; idx < MAX_SECTIONS; idx++)
+ for (idx = 0; idx < sap->num_sections; idx++)
if (sap->other[idx].name)
xfree (sap->other[idx].name);
xfree (sap);
}
+/* Initialize OBJFILE's sect_index_* members. */
+static void
+init_objfile_sect_indices (struct objfile *objfile)
+{
+ asection *sect;
+ int i;
+
+ sect = bfd_get_section_by_name (objfile->obfd, ".text");
+ if (sect)
+ objfile->sect_index_text = sect->index;
+
+ sect = bfd_get_section_by_name (objfile->obfd, ".data");
+ if (sect)
+ objfile->sect_index_data = sect->index;
+
+ sect = bfd_get_section_by_name (objfile->obfd, ".bss");
+ if (sect)
+ objfile->sect_index_bss = sect->index;
+
+ sect = bfd_get_section_by_name (objfile->obfd, ".rodata");
+ if (sect)
+ objfile->sect_index_rodata = sect->index;
+
+ /* This is where things get really weird... We MUST have valid
+ indices for the various sect_index_* members or gdb will abort.
+ So if for example, there is no ".text" section, we have to
+ accomodate that. Except when explicitly adding symbol files at
+ some address, section_offsets contains nothing but zeros, so it
+ doesn't matter which slot in section_offsets the individual
+ sect_index_* members index into. So if they are all zero, it is
+ safe to just point all the currently uninitialized indices to the
+ first slot. */
+
+ for (i = 0; i < objfile->num_sections; i++)
+ {
+ if (ANOFFSET (objfile->section_offsets, i) != 0)
+ {
+ break;
+ }
+ }
+ if (i == objfile->num_sections)
+ {
+ if (objfile->sect_index_text == -1)
+ objfile->sect_index_text = 0;
+ if (objfile->sect_index_data == -1)
+ objfile->sect_index_data = 0;
+ if (objfile->sect_index_bss == -1)
+ objfile->sect_index_bss = 0;
+ if (objfile->sect_index_rodata == -1)
+ objfile->sect_index_rodata = 0;
+ }
+}
+
+
/* Parse the user's idea of an offset for dynamic linking, into our idea
- of how to represent it for fast symbol reading. This is the default
+ of how to represent it for fast symbol reading. This is the default
version of the sym_fns.sym_offsets function for symbol readers that
don't need to do anything special. It allocates a section_offsets table
for the objectfile OBJFILE and stuffs ADDR into all of the offsets. */
struct section_addr_info *addrs)
{
int i;
- asection *sect = NULL;
- objfile->num_sections = SECT_OFF_MAX;
+ objfile->num_sections = bfd_count_sections (objfile->obfd);
objfile->section_offsets = (struct section_offsets *)
- obstack_alloc (&objfile->psymbol_obstack, SIZEOF_SECTION_OFFSETS);
- memset (objfile->section_offsets, 0, SIZEOF_SECTION_OFFSETS);
+ obstack_alloc (&objfile->objfile_obstack,
+ SIZEOF_N_SECTION_OFFSETS (objfile->num_sections));
+ memset (objfile->section_offsets, 0,
+ SIZEOF_N_SECTION_OFFSETS (objfile->num_sections));
/* Now calculate offsets for section that were specified by the
caller. */
- for (i = 0; i < MAX_SECTIONS && addrs->other[i].name; i++)
+ for (i = 0; i < addrs->num_sections && addrs->other[i].name; i++)
{
struct other_sections *osp ;
/* Remember the bfd indexes for the .text, .data, .bss and
.rodata sections. */
-
- sect = bfd_get_section_by_name (objfile->obfd, ".text");
- if (sect)
- objfile->sect_index_text = sect->index;
-
- sect = bfd_get_section_by_name (objfile->obfd, ".data");
- if (sect)
- objfile->sect_index_data = sect->index;
-
- sect = bfd_get_section_by_name (objfile->obfd, ".bss");
- if (sect)
- objfile->sect_index_bss = sect->index;
-
- sect = bfd_get_section_by_name (objfile->obfd, ".rodata");
- if (sect)
- objfile->sect_index_rodata = sect->index;
-
+ init_objfile_sect_indices (objfile);
}
+
/* Process a symbol file, as either the main file or as a dynamically
loaded file.
OBJFILE is where the symbols are to be read from.
- ADDR is the address where the text segment was loaded, unless the
- objfile is the main symbol file, in which case it is zero.
+ ADDRS is the list of section load addresses. If the user has given
+ an 'add-symbol-file' command, then this is the list of offsets and
+ addresses he or she provided as arguments to the command; or, if
+ we're handling a shared library, these are the actual addresses the
+ sections are loaded at, according to the inferior's dynamic linker
+ (as gleaned by GDB's shared library code). We convert each address
+ into an offset from the section VMA's as it appears in the object
+ file, and then call the file's sym_offsets function to convert this
+ into a format-specific offset table --- a `struct section_offsets'.
+ If ADDRS is non-zero, OFFSETS must be zero.
+
+ OFFSETS is a table of section offsets already in the right
+ format-specific representation. NUM_OFFSETS is the number of
+ elements present in OFFSETS->offsets. If OFFSETS is non-zero, we
+ assume this is the proper table the call to sym_offsets described
+ above would produce. Instead of calling sym_offsets, we just dump
+ it right into objfile->section_offsets. (When we're re-reading
+ symbols from an objfile, we don't have the original load address
+ list any more; all we have is the section offset table.) If
+ OFFSETS is non-zero, ADDRS must be zero.
MAINLINE is nonzero if this is the main symbol file, or zero if
it's an extra symbol file such as dynamically loaded code.
the symbol reading (and complaints can be more terse about it). */
void
-syms_from_objfile (struct objfile *objfile, struct section_addr_info *addrs,
- int mainline, int verbo)
-{
- asection *lower_sect;
- asection *sect;
- CORE_ADDR lower_offset;
- struct section_addr_info local_addr;
+syms_from_objfile (struct objfile *objfile,
+ struct section_addr_info *addrs,
+ struct section_offsets *offsets,
+ int num_offsets,
+ int mainline,
+ int verbo)
+{
+ struct section_addr_info *local_addr = NULL;
struct cleanup *old_chain;
- int i;
- /* If ADDRS is NULL, initialize the local section_addr_info struct and
- point ADDRS to it. We now establish the convention that an addr of
- zero means no load address was specified. */
-
- if (addrs == NULL)
- {
- memset (&local_addr, 0, sizeof (local_addr));
- addrs = &local_addr;
- }
+ gdb_assert (! (addrs && offsets));
init_entry_point_info (objfile);
find_sym_fns (objfile);
+ if (objfile->sf == NULL)
+ return; /* No symbols. */
+
/* Make sure that partially constructed symbol tables will be cleaned up
if an error occurs during symbol reading. */
old_chain = make_cleanup_free_objfile (objfile);
+ /* If ADDRS and OFFSETS are both NULL, put together a dummy address
+ list. We now establish the convention that an addr of zero means
+ no load address was specified. */
+ if (! addrs && ! offsets)
+ {
+ local_addr
+ = alloc_section_addr_info (bfd_count_sections (objfile->obfd));
+ make_cleanup (xfree, local_addr);
+ addrs = local_addr;
+ }
+
+ /* Now either addrs or offsets is non-zero. */
+
if (mainline)
{
/* We will modify the main symbol table, make sure that all its users
We no longer warn if the lowest section is not a text segment (as
happens for the PA64 port. */
- if (!mainline)
+ if (!mainline && addrs && addrs->other[0].name)
{
- /* Find lowest loadable section to be used as starting point for
+ asection *lower_sect;
+ asection *sect;
+ CORE_ADDR lower_offset;
+ int i;
+
+ /* Find lowest loadable section to be used as starting point for
continguous sections. FIXME!! won't work without call to find
.text first, but this assumes text is lowest section. */
lower_sect = bfd_get_section_by_name (objfile->obfd, ".text");
if (lower_sect == NULL)
bfd_map_over_sections (objfile->obfd, find_lowest_section,
- (PTR) &lower_sect);
+ &lower_sect);
if (lower_sect == NULL)
warning ("no loadable sections found in added symbol-file %s",
objfile->name);
- else
+ else
if ((bfd_get_section_flags (objfile->obfd, lower_sect) & SEC_CODE) == 0)
warning ("Lowest section in %s is %s at %s",
objfile->name,
lower_offset = bfd_section_vma (objfile->obfd, lower_sect);
else
lower_offset = 0;
-
- /* Calculate offsets for the loadable sections.
+
+ /* Calculate offsets for the loadable sections.
FIXME! Sections must be in order of increasing loadable section
so that contiguous sections can use the lower-offset!!!
-
- Adjust offsets if the segments are not contiguous.
- If the section is contiguous, its offset should be set to
+
+ Adjust offsets if the segments are not contiguous.
+ If the section is contiguous, its offset should be set to
the offset of the highest loadable section lower than it
(the loadable section directly below it in memory).
this_offset = lower_offset = lower_addr - lower_orig_addr */
- /* Calculate offsets for sections. */
- for (i=0 ; i < MAX_SECTIONS && addrs->other[i].name; i++)
- {
- if (addrs->other[i].addr != 0)
- {
- sect = bfd_get_section_by_name (objfile->obfd, addrs->other[i].name);
- if (sect)
- {
- addrs->other[i].addr -= bfd_section_vma (objfile->obfd, sect);
- lower_offset = addrs->other[i].addr;
- /* This is the index used by BFD. */
- addrs->other[i].sectindex = sect->index ;
- }
- else
- {
- warning ("section %s not found in %s", addrs->other[i].name,
- objfile->name);
- addrs->other[i].addr = 0;
- }
- }
- else
- addrs->other[i].addr = lower_offset;
- }
+ for (i = 0; i < addrs->num_sections && addrs->other[i].name; i++)
+ {
+ if (addrs->other[i].addr != 0)
+ {
+ sect = bfd_get_section_by_name (objfile->obfd,
+ addrs->other[i].name);
+ if (sect)
+ {
+ addrs->other[i].addr
+ -= bfd_section_vma (objfile->obfd, sect);
+ lower_offset = addrs->other[i].addr;
+ /* This is the index used by BFD. */
+ addrs->other[i].sectindex = sect->index ;
+ }
+ else
+ {
+ warning ("section %s not found in %s",
+ addrs->other[i].name,
+ objfile->name);
+ addrs->other[i].addr = 0;
+ }
+ }
+ else
+ addrs->other[i].addr = lower_offset;
+ }
}
/* Initialize symbol reading routines for this objfile, allow complaints to
initial symbol reading for this file. */
(*objfile->sf->sym_init) (objfile);
- clear_complaints (1, verbo);
+ clear_complaints (&symfile_complaints, 1, verbo);
+
+ if (addrs)
+ (*objfile->sf->sym_offsets) (objfile, addrs);
+ else
+ {
+ size_t size = SIZEOF_N_SECTION_OFFSETS (num_offsets);
+
+ /* Just copy in the offset table directly as given to us. */
+ objfile->num_sections = num_offsets;
+ objfile->section_offsets
+ = ((struct section_offsets *)
+ obstack_alloc (&objfile->objfile_obstack, size));
+ memcpy (objfile->section_offsets, offsets, size);
- (*objfile->sf->sym_offsets) (objfile, addrs);
+ init_objfile_sect_indices (objfile);
+ }
-#ifndef IBM6000_TARGET
+#ifndef DEPRECATED_IBM6000_TARGET
/* This is a SVR4/SunOS specific hack, I think. In any event, it
screws RS/6000. sym_offsets should be doing this sort of thing,
because it knows the mapping between bfd sections and
{
struct obj_section *s;
- /* Map section offsets in "addr" back to the object's
- sections by comparing the section names with bfd's
+ /* Map section offsets in "addr" back to the object's
+ sections by comparing the section names with bfd's
section names. Then adjust the section address by
the offset. */ /* for gdb/13815 */
-
+
ALL_OBJFILE_OSECTIONS (objfile, s)
{
CORE_ADDR s_addr = 0;
int i;
- for (i = 0;
- !s_addr && i < MAX_SECTIONS && addrs->other[i].name;
+ for (i = 0;
+ !s_addr && i < addrs->num_sections && addrs->other[i].name;
i++)
- if (strcmp (s->the_bfd_section->name, addrs->other[i].name) == 0)
+ if (strcmp (bfd_section_name (s->objfile->obfd,
+ s->the_bfd_section),
+ addrs->other[i].name) == 0)
s_addr = addrs->other[i].addr; /* end added for gdb/13815 */
-
+
s->addr -= s->offset;
s->addr += s_addr;
s->endaddr -= s->offset;
s->offset += s_addr;
}
}
-#endif /* not IBM6000_TARGET */
+#endif /* not DEPRECATED_IBM6000_TARGET */
(*objfile->sf->sym_read) (objfile, mainline);
- if (!have_partial_symbols () && !have_full_symbols ())
- {
- wrap_here ("");
- printf_filtered ("(no debugging symbols found)...");
- wrap_here ("");
- }
-
/* Don't allow char * to have a typename (else would get caddr_t).
Ditto void *. FIXME: Check whether this is now done by all the
symbol readers themselves (many of them now do), and if so remove
/* Discard cleanups as symbol reading was successful. */
discard_cleanups (old_chain);
-
- /* Call this after reading in a new symbol table to give target
- dependent code a crack at the new symbols. For instance, this
- could be used to update the values of target-specific symbols GDB
- needs to keep track of (such as _sigtramp, or whatever). */
-
- TARGET_SYMFILE_POSTREAD (objfile);
}
/* Perform required actions after either reading in the initial
}
/* We're done reading the symbol file; finish off complaints. */
- clear_complaints (0, verbo);
+ clear_complaints (&symfile_complaints, 0, verbo);
}
/* Process a symbol file, as either the main file or as a dynamically
loaded file.
- NAME is the file name (which will be tilde-expanded and made
- absolute herein) (but we don't free or modify NAME itself).
- FROM_TTY says how verbose to be. MAINLINE specifies whether this
- is the main symbol file, or whether it's an extra symbol file such
- as dynamically loaded code. If !mainline, ADDR is the address
- where the text segment was loaded.
+ ABFD is a BFD already open on the file, as from symfile_bfd_open.
+ This BFD will be closed on error, and is always consumed by this function.
+
+ FROM_TTY says how verbose to be.
+
+ MAINLINE specifies whether this is the main symbol file, or whether
+ it's an extra symbol file such as dynamically loaded code.
+
+ ADDRS, OFFSETS, and NUM_OFFSETS are as described for
+ syms_from_objfile, above. ADDRS is ignored when MAINLINE is
+ non-zero.
Upon success, returns a pointer to the objfile that was added.
Upon failure, jumps back to command level (never returns). */
-
-struct objfile *
-symbol_file_add (char *name, int from_tty, struct section_addr_info *addrs,
- int mainline, int flags)
+static struct objfile *
+symbol_file_add_with_addrs_or_offsets (bfd *abfd, int from_tty,
+ struct section_addr_info *addrs,
+ struct section_offsets *offsets,
+ int num_offsets,
+ int mainline, int flags)
{
struct objfile *objfile;
struct partial_symtab *psymtab;
- bfd *abfd;
+ char *debugfile;
+ struct section_addr_info *orig_addrs = NULL;
+ struct cleanup *my_cleanups;
+ const char *name = bfd_get_filename (abfd);
- /* Open a bfd for the file, and give user a chance to burp if we'd be
- interactively wiping out any existing symbols. */
+ my_cleanups = make_cleanup_bfd_close (abfd);
- abfd = symfile_bfd_open (name);
+ /* Give user a chance to burp if we'd be
+ interactively wiping out any existing symbols. */
if ((have_full_symbols () || have_partial_symbols ())
&& mainline
error ("Not confirmed.");
objfile = allocate_objfile (abfd, flags);
+ discard_cleanups (my_cleanups);
- /* If the objfile uses a mapped symbol file, and we have a psymtab for
- it, then skip reading any symbols at this time. */
+ if (addrs)
+ {
+ orig_addrs = copy_section_addr_info (addrs);
+ make_cleanup_free_section_addr_info (orig_addrs);
+ }
- if ((objfile->flags & OBJF_MAPPED) && (objfile->flags & OBJF_SYMS))
+ /* We either created a new mapped symbol table, mapped an existing
+ symbol table file which has not had initial symbol reading
+ performed, or need to read an unmapped symbol table. */
+ if (from_tty || info_verbose)
{
- /* We mapped in an existing symbol table file that already has had
- initial symbol reading performed, so we can skip that part. Notify
- the user that instead of reading the symbols, they have been mapped.
- */
- if (from_tty || info_verbose)
+ if (deprecated_pre_add_symbol_hook)
+ deprecated_pre_add_symbol_hook (name);
+ else
{
- printf_filtered ("Mapped symbols for %s...", name);
+ printf_unfiltered ("Reading symbols from %s...", name);
wrap_here ("");
gdb_flush (gdb_stdout);
}
- init_entry_point_info (objfile);
- find_sym_fns (objfile);
- }
- else
- {
- /* We either created a new mapped symbol table, mapped an existing
- symbol table file which has not had initial symbol reading
- performed, or need to read an unmapped symbol table. */
- if (from_tty || info_verbose)
- {
- if (pre_add_symbol_hook)
- pre_add_symbol_hook (name);
- else
- {
- printf_filtered ("Reading symbols from %s...", name);
- wrap_here ("");
- gdb_flush (gdb_stdout);
- }
- }
- syms_from_objfile (objfile, addrs, mainline, from_tty);
}
+ syms_from_objfile (objfile, addrs, offsets, num_offsets,
+ mainline, from_tty);
/* We now have at least a partial symbol table. Check to see if the
user requested that all symbols be read on initial access via either
{
if (from_tty || info_verbose)
{
- printf_filtered ("expanding to full symbols...");
+ printf_unfiltered ("expanding to full symbols...");
wrap_here ("");
gdb_flush (gdb_stdout);
}
}
}
+ debugfile = find_separate_debug_file (objfile);
+ if (debugfile)
+ {
+ if (addrs != NULL)
+ {
+ objfile->separate_debug_objfile
+ = symbol_file_add (debugfile, from_tty, orig_addrs, 0, flags);
+ }
+ else
+ {
+ objfile->separate_debug_objfile
+ = symbol_file_add (debugfile, from_tty, NULL, 0, flags);
+ }
+ objfile->separate_debug_objfile->separate_debug_objfile_backlink
+ = objfile;
+
+ /* Put the separate debug object before the normal one, this is so that
+ usage of the ALL_OBJFILES_SAFE macro will stay safe. */
+ put_objfile_before (objfile->separate_debug_objfile, objfile);
+
+ xfree (debugfile);
+ }
+
+ if (!have_partial_symbols () && !have_full_symbols ())
+ {
+ wrap_here ("");
+ printf_filtered ("(no debugging symbols found)");
+ if (from_tty || info_verbose)
+ printf_filtered ("...");
+ else
+ printf_filtered ("\n");
+ wrap_here ("");
+ }
+
if (from_tty || info_verbose)
{
- if (post_add_symbol_hook)
- post_add_symbol_hook ();
+ if (deprecated_post_add_symbol_hook)
+ deprecated_post_add_symbol_hook ();
else
{
- printf_filtered ("done.\n");
- gdb_flush (gdb_stdout);
+ printf_unfiltered ("done.\n");
}
}
+ /* We print some messages regardless of whether 'from_tty ||
+ info_verbose' is true, so make sure they go out at the right
+ time. */
+ gdb_flush (gdb_stdout);
+
+ do_cleanups (my_cleanups);
+
+ if (objfile->sf == NULL)
+ return objfile; /* No symbols. */
+
new_symfile_objfile (objfile, mainline, from_tty);
- if (target_new_objfile_hook)
- target_new_objfile_hook (objfile);
+ if (deprecated_target_new_objfile_hook)
+ deprecated_target_new_objfile_hook (objfile);
+ bfd_cache_close_all ();
return (objfile);
}
+
+/* Process the symbol file ABFD, as either the main file or as a
+ dynamically loaded file.
+
+ See symbol_file_add_with_addrs_or_offsets's comments for
+ details. */
+struct objfile *
+symbol_file_add_from_bfd (bfd *abfd, int from_tty,
+ struct section_addr_info *addrs,
+ int mainline, int flags)
+{
+ return symbol_file_add_with_addrs_or_offsets (abfd,
+ from_tty, addrs, 0, 0,
+ mainline, flags);
+}
+
+
+/* Process a symbol file, as either the main file or as a dynamically
+ loaded file. See symbol_file_add_with_addrs_or_offsets's comments
+ for details. */
+struct objfile *
+symbol_file_add (char *name, int from_tty, struct section_addr_info *addrs,
+ int mainline, int flags)
+{
+ return symbol_file_add_from_bfd (symfile_bfd_open (name), from_tty,
+ addrs, mainline, flags);
+}
+
+
/* Call symbol_file_add() with default values and update whatever is
affected by the loading of a new main().
Used when the file is supplied in the gdb command line
The auxiliary function, symbol_file_add_main_1(), has the flags
argument for the switches that can only be specified in the symbol_file
command itself. */
-
+
void
symbol_file_add_main (char *args, int from_tty)
{
{
symbol_file_add (args, from_tty, NULL, 1, flags);
-#ifdef HPUXHPPA
- RESET_HP_UX_GLOBALS ();
-#endif
-
/* Getting new symbols may change our opinion about
what is frameless. */
reinit_frame_cache ();
symfile_objfile = NULL;
if (from_tty)
printf_unfiltered ("No symbol file now.\n");
-#ifdef HPUXHPPA
- RESET_HP_UX_GLOBALS ();
+}
+
+static char *
+get_debug_link_info (struct objfile *objfile, unsigned long *crc32_out)
+{
+ asection *sect;
+ bfd_size_type debuglink_size;
+ unsigned long crc32;
+ char *contents;
+ int crc_offset;
+ unsigned char *p;
+
+ sect = bfd_get_section_by_name (objfile->obfd, ".gnu_debuglink");
+
+ if (sect == NULL)
+ return NULL;
+
+ debuglink_size = bfd_section_size (objfile->obfd, sect);
+
+ contents = xmalloc (debuglink_size);
+ bfd_get_section_contents (objfile->obfd, sect, contents,
+ (file_ptr)0, (bfd_size_type)debuglink_size);
+
+ /* Crc value is stored after the filename, aligned up to 4 bytes. */
+ crc_offset = strlen (contents) + 1;
+ crc_offset = (crc_offset + 3) & ~3;
+
+ crc32 = bfd_get_32 (objfile->obfd, (bfd_byte *) (contents + crc_offset));
+
+ *crc32_out = crc32;
+ return contents;
+}
+
+static int
+separate_debug_file_exists (const char *name, unsigned long crc)
+{
+ unsigned long file_crc = 0;
+ int fd;
+ char buffer[8*1024];
+ int count;
+
+ fd = open (name, O_RDONLY | O_BINARY);
+ if (fd < 0)
+ return 0;
+
+ while ((count = read (fd, buffer, sizeof (buffer))) > 0)
+ file_crc = gnu_debuglink_crc32 (file_crc, buffer, count);
+
+ close (fd);
+
+ return crc == file_crc;
+}
+
+static char *debug_file_directory = NULL;
+
+#if ! defined (DEBUG_SUBDIRECTORY)
+#define DEBUG_SUBDIRECTORY ".debug"
#endif
+
+static char *
+find_separate_debug_file (struct objfile *objfile)
+{
+ asection *sect;
+ char *basename;
+ char *dir;
+ char *debugfile;
+ char *name_copy;
+ bfd_size_type debuglink_size;
+ unsigned long crc32;
+ int i;
+
+ basename = get_debug_link_info (objfile, &crc32);
+
+ if (basename == NULL)
+ return NULL;
+
+ dir = xstrdup (objfile->name);
+
+ /* Strip off the final filename part, leaving the directory name,
+ followed by a slash. Objfile names should always be absolute and
+ tilde-expanded, so there should always be a slash in there
+ somewhere. */
+ for (i = strlen(dir) - 1; i >= 0; i--)
+ {
+ if (IS_DIR_SEPARATOR (dir[i]))
+ break;
+ }
+ gdb_assert (i >= 0 && IS_DIR_SEPARATOR (dir[i]));
+ dir[i+1] = '\0';
+
+ debugfile = alloca (strlen (debug_file_directory) + 1
+ + strlen (dir)
+ + strlen (DEBUG_SUBDIRECTORY)
+ + strlen ("/")
+ + strlen (basename)
+ + 1);
+
+ /* First try in the same directory as the original file. */
+ strcpy (debugfile, dir);
+ strcat (debugfile, basename);
+
+ if (separate_debug_file_exists (debugfile, crc32))
+ {
+ xfree (basename);
+ xfree (dir);
+ return xstrdup (debugfile);
+ }
+
+ /* Then try in the subdirectory named DEBUG_SUBDIRECTORY. */
+ strcpy (debugfile, dir);
+ strcat (debugfile, DEBUG_SUBDIRECTORY);
+ strcat (debugfile, "/");
+ strcat (debugfile, basename);
+
+ if (separate_debug_file_exists (debugfile, crc32))
+ {
+ xfree (basename);
+ xfree (dir);
+ return xstrdup (debugfile);
+ }
+
+ /* Then try in the global debugfile directory. */
+ strcpy (debugfile, debug_file_directory);
+ strcat (debugfile, "/");
+ strcat (debugfile, dir);
+ strcat (debugfile, basename);
+
+ if (separate_debug_file_exists (debugfile, crc32))
+ {
+ xfree (basename);
+ xfree (dir);
+ return xstrdup (debugfile);
+ }
+
+ xfree (basename);
+ xfree (dir);
+ return NULL;
}
+
/* This is the symbol-file command. Read the file, analyze its
symbols, and add a struct symtab to a symtab list. The syntax of
the command is rather bizarre--(1) buildargv implements various
cleanups = make_cleanup_freeargv (argv);
while (*argv != NULL)
{
- if (STREQ (*argv, "-mapped"))
- flags |= OBJF_MAPPED;
- else
- if (STREQ (*argv, "-readnow"))
- flags |= OBJF_READNOW;
- else
- if (**argv == '-')
- error ("unknown option `%s'", *argv);
- else
- {
- name = *argv;
+ if (strcmp (*argv, "-readnow") == 0)
+ flags |= OBJF_READNOW;
+ else if (**argv == '-')
+ error ("unknown option `%s'", *argv);
+ else
+ {
+ name = *argv;
- symbol_file_add_main_1 (name, from_tty, flags);
- }
+ symbol_file_add_main_1 (name, from_tty, flags);
+ }
argv++;
}
name = tilde_expand (name); /* Returns 1st new malloc'd copy */
/* Look down path for it, allocate 2nd new malloc'd copy. */
- desc = openp (getenv ("PATH"), 1, name, O_RDONLY | O_BINARY, 0, &absolute_name);
+ desc = openp (getenv ("PATH"), OPF_TRY_CWD_FIRST, name, O_RDONLY | O_BINARY,
+ 0, &absolute_name);
#if defined(__GO32__) || defined(_WIN32) || defined (__CYGWIN__)
if (desc < 0)
{
char *exename = alloca (strlen (name) + 5);
strcat (strcpy (exename, name), ".exe");
- desc = openp (getenv ("PATH"), 1, exename, O_RDONLY | O_BINARY,
- 0, &absolute_name);
+ desc = openp (getenv ("PATH"), OPF_TRY_CWD_FIRST, exename,
+ O_RDONLY | O_BINARY, 0, &absolute_name);
}
#endif
if (desc < 0)
error ("\"%s\": can't open to read symbols: %s.", name,
bfd_errmsg (bfd_get_error ()));
}
- sym_bfd->cacheable = true;
+ bfd_set_cacheable (sym_bfd, 1);
if (!bfd_check_format (sym_bfd, bfd_object))
{
return (sym_bfd);
}
+/* Return the section index for the given section name. Return -1 if
+ the section was not found. */
+int
+get_section_index (struct objfile *objfile, char *section_name)
+{
+ asection *sect = bfd_get_section_by_name (objfile->obfd, section_name);
+ if (sect)
+ return sect->index;
+ else
+ return -1;
+}
+
/* Link a new symtab_fns into the global symtab_fns list. Called on gdb
startup by the _initialize routine in each object file format reader,
to register information about each format the the reader is prepared
enum bfd_flavour our_flavour = bfd_get_flavour (objfile->obfd);
char *our_target = bfd_get_target (objfile->obfd);
- /* Special kludge for apollo. See dstread.c. */
- if (STREQN (our_target, "apollo", 6))
- our_flavour = (enum bfd_flavour) -2;
+ if (our_flavour == bfd_target_srec_flavour
+ || our_flavour == bfd_target_ihex_flavour
+ || our_flavour == bfd_target_tekhex_flavour)
+ return; /* No symbols. */
for (sf = symtab_fns; sf != NULL; sf = sf->next)
{
static int download_write_size = 512;
static int validate_download = 0;
+/* Callback service function for generic_load (bfd_map_over_sections). */
+
+static void
+add_section_size_callback (bfd *abfd, asection *asec, void *data)
+{
+ bfd_size_type *sum = data;
+
+ *sum += bfd_get_section_size (asec);
+}
+
+/* Opaque data for load_section_callback. */
+struct load_section_data {
+ unsigned long load_offset;
+ unsigned long write_count;
+ unsigned long data_count;
+ bfd_size_type total_size;
+};
+
+/* Callback service function for generic_load (bfd_map_over_sections). */
+
+static void
+load_section_callback (bfd *abfd, asection *asec, void *data)
+{
+ struct load_section_data *args = data;
+
+ if (bfd_get_section_flags (abfd, asec) & SEC_LOAD)
+ {
+ bfd_size_type size = bfd_get_section_size (asec);
+ if (size > 0)
+ {
+ char *buffer;
+ struct cleanup *old_chain;
+ CORE_ADDR lma = bfd_section_lma (abfd, asec) + args->load_offset;
+ bfd_size_type block_size;
+ int err;
+ const char *sect_name = bfd_get_section_name (abfd, asec);
+ bfd_size_type sent;
+
+ if (download_write_size > 0 && size > download_write_size)
+ block_size = download_write_size;
+ else
+ block_size = size;
+
+ buffer = xmalloc (size);
+ old_chain = make_cleanup (xfree, buffer);
+
+ /* Is this really necessary? I guess it gives the user something
+ to look at during a long download. */
+ ui_out_message (uiout, 0, "Loading section %s, size 0x%s lma 0x%s\n",
+ sect_name, paddr_nz (size), paddr_nz (lma));
+
+ bfd_get_section_contents (abfd, asec, buffer, 0, size);
+
+ sent = 0;
+ do
+ {
+ int len;
+ bfd_size_type this_transfer = size - sent;
+
+ if (this_transfer >= block_size)
+ this_transfer = block_size;
+ len = target_write_memory_partial (lma, buffer,
+ this_transfer, &err);
+ if (err)
+ break;
+ if (validate_download)
+ {
+ /* Broken memories and broken monitors manifest
+ themselves here when bring new computers to
+ life. This doubles already slow downloads. */
+ /* NOTE: cagney/1999-10-18: A more efficient
+ implementation might add a verify_memory()
+ method to the target vector and then use
+ that. remote.c could implement that method
+ using the ``qCRC'' packet. */
+ char *check = xmalloc (len);
+ struct cleanup *verify_cleanups =
+ make_cleanup (xfree, check);
+
+ if (target_read_memory (lma, check, len) != 0)
+ error ("Download verify read failed at 0x%s",
+ paddr (lma));
+ if (memcmp (buffer, check, len) != 0)
+ error ("Download verify compare failed at 0x%s",
+ paddr (lma));
+ do_cleanups (verify_cleanups);
+ }
+ args->data_count += len;
+ lma += len;
+ buffer += len;
+ args->write_count += 1;
+ sent += len;
+ if (quit_flag
+ || (deprecated_ui_load_progress_hook != NULL
+ && deprecated_ui_load_progress_hook (sect_name, sent)))
+ error ("Canceled the download");
+
+ if (deprecated_show_load_progress != NULL)
+ deprecated_show_load_progress (sect_name, sent, size,
+ args->data_count,
+ args->total_size);
+ }
+ while (sent < size);
+
+ if (err != 0)
+ error ("Memory access error while loading section %s.", sect_name);
+
+ do_cleanups (old_chain);
+ }
+ }
+}
+
void
generic_load (char *args, int from_tty)
{
asection *s;
bfd *loadfile_bfd;
time_t start_time, end_time; /* Start and end times of download */
- unsigned long data_count = 0; /* Number of bytes transferred to memory */
- unsigned long write_count = 0; /* Number of writes needed. */
- unsigned long load_offset; /* offset to add to vma for each section */
char *filename;
struct cleanup *old_cleanups;
char *offptr;
- CORE_ADDR total_size = 0;
- CORE_ADDR total_sent = 0;
+ struct load_section_data cbdata;
+ CORE_ADDR entry;
+
+ cbdata.load_offset = 0; /* Offset to add to vma for each section. */
+ cbdata.write_count = 0; /* Number of writes needed. */
+ cbdata.data_count = 0; /* Number of bytes written to target memory. */
+ cbdata.total_size = 0; /* Total size of all bfd sectors. */
/* Parse the input argument - the user can specify a load offset as
a second argument. */
if (offptr != NULL)
{
char *endptr;
- load_offset = strtoul (offptr, &endptr, 0);
+
+ cbdata.load_offset = strtoul (offptr, &endptr, 0);
if (offptr == endptr)
error ("Invalid download offset:%s\n", offptr);
*offptr = '\0';
}
else
- load_offset = 0;
+ cbdata.load_offset = 0;
/* Open the file for loading. */
loadfile_bfd = bfd_openr (filename, gnutarget);
bfd_errmsg (bfd_get_error ()));
}
- for (s = loadfile_bfd->sections; s; s = s->next)
- if (s->flags & SEC_LOAD)
- total_size += bfd_get_section_size_before_reloc (s);
+ bfd_map_over_sections (loadfile_bfd, add_section_size_callback,
+ (void *) &cbdata.total_size);
start_time = time (NULL);
- for (s = loadfile_bfd->sections; s; s = s->next)
- {
- if (s->flags & SEC_LOAD)
- {
- CORE_ADDR size = bfd_get_section_size_before_reloc (s);
- if (size > 0)
- {
- char *buffer;
- struct cleanup *old_chain;
- CORE_ADDR lma = s->lma + load_offset;
- CORE_ADDR block_size;
- int err;
- const char *sect_name = bfd_get_section_name (loadfile_bfd, s);
- CORE_ADDR sent;
-
- if (download_write_size > 0 && size > download_write_size)
- block_size = download_write_size;
- else
- block_size = size;
-
- buffer = xmalloc (size);
- old_chain = make_cleanup (xfree, buffer);
-
- /* Is this really necessary? I guess it gives the user something
- to look at during a long download. */
-#ifdef UI_OUT
- ui_out_message (uiout, 0, "Loading section %s, size 0x%s lma 0x%s\n",
- sect_name, paddr_nz (size), paddr_nz (lma));
-#else
- fprintf_unfiltered (gdb_stdout,
- "Loading section %s, size 0x%s lma 0x%s\n",
- sect_name, paddr_nz (size), paddr_nz (lma));
-#endif
-
- bfd_get_section_contents (loadfile_bfd, s, buffer, 0, size);
-
- sent = 0;
- do
- {
- CORE_ADDR len;
- CORE_ADDR this_transfer = size - sent;
- if (this_transfer >= block_size)
- this_transfer = block_size;
- len = target_write_memory_partial (lma, buffer,
- this_transfer, &err);
- if (err)
- break;
- if (validate_download)
- {
- /* Broken memories and broken monitors manifest
- themselves here when bring new computers to
- life. This doubles already slow downloads. */
- /* NOTE: cagney/1999-10-18: A more efficient
- implementation might add a verify_memory()
- method to the target vector and then use
- that. remote.c could implement that method
- using the ``qCRC'' packet. */
- char *check = xmalloc (len);
- struct cleanup *verify_cleanups = make_cleanup (xfree, check);
- if (target_read_memory (lma, check, len) != 0)
- error ("Download verify read failed at 0x%s",
- paddr (lma));
- if (memcmp (buffer, check, len) != 0)
- error ("Download verify compare failed at 0x%s",
- paddr (lma));
- do_cleanups (verify_cleanups);
- }
- data_count += len;
- lma += len;
- buffer += len;
- write_count += 1;
- sent += len;
- total_sent += len;
- if (quit_flag
- || (ui_load_progress_hook != NULL
- && ui_load_progress_hook (sect_name, sent)))
- error ("Canceled the download");
-
- if (show_load_progress != NULL)
- show_load_progress (sect_name, sent, size, total_sent, total_size);
- }
- while (sent < size);
-
- if (err != 0)
- error ("Memory access error while loading section %s.", sect_name);
-
- do_cleanups (old_chain);
- }
- }
- }
+ bfd_map_over_sections (loadfile_bfd, load_section_callback, &cbdata);
end_time = time (NULL);
- {
- CORE_ADDR entry;
- entry = bfd_get_start_address (loadfile_bfd);
-#ifdef UI_OUT
- ui_out_text (uiout, "Start address ");
- ui_out_field_fmt (uiout, "address", "0x%s" , paddr_nz (entry));
- ui_out_text (uiout, ", load size ");
- ui_out_field_fmt (uiout, "load-size", "%ld" , data_count);
- ui_out_text (uiout, "\n");
-
-#else
- fprintf_unfiltered (gdb_stdout,
- "Start address 0x%s , load size %ld\n",
- paddr_nz (entry), data_count);
-#endif
- /* We were doing this in remote-mips.c, I suspect it is right
- for other targets too. */
- write_pc (entry);
- }
-
- /* FIXME: are we supposed to call symbol_file_add or not? According to
- a comment from remote-mips.c (where a call to symbol_file_add was
- commented out), making the call confuses GDB if more than one file is
- loaded in. remote-nindy.c had no call to symbol_file_add, but remote-vx.c
- does. */
- print_transfer_performance (gdb_stdout, data_count, write_count,
- end_time - start_time);
+ entry = bfd_get_start_address (loadfile_bfd);
+ ui_out_text (uiout, "Start address ");
+ ui_out_field_fmt (uiout, "address", "0x%s", paddr_nz (entry));
+ ui_out_text (uiout, ", load size ");
+ ui_out_field_fmt (uiout, "load-size", "%lu", cbdata.data_count);
+ ui_out_text (uiout, "\n");
+ /* We were doing this in remote-mips.c, I suspect it is right
+ for other targets too. */
+ write_pc (entry);
+
+ /* FIXME: are we supposed to call symbol_file_add or not? According
+ to a comment from remote-mips.c (where a call to symbol_file_add
+ was commented out), making the call confuses GDB if more than one
+ file is loaded in. Some targets do (e.g., remote-vx.c) but
+ others don't (or didn't - perhaps they have all been deleted). */
+
+ print_transfer_performance (gdb_stdout, cbdata.data_count,
+ cbdata.write_count, end_time - start_time);
do_cleanups (old_cleanups);
}
report_transfer_performance (unsigned long data_count, time_t start_time,
time_t end_time)
{
- print_transfer_performance (gdb_stdout, data_count, end_time - start_time, 0);
+ print_transfer_performance (gdb_stdout, data_count,
+ end_time - start_time, 0);
}
void
unsigned long write_count,
unsigned long time_count)
{
-#ifdef UI_OUT
ui_out_text (uiout, "Transfer rate: ");
if (time_count > 0)
{
- ui_out_field_fmt (uiout, "transfer-rate", "%ld",
+ ui_out_field_fmt (uiout, "transfer-rate", "%lu",
(data_count * 8) / time_count);
ui_out_text (uiout, " bits/sec");
}
else
{
- ui_out_field_fmt (uiout, "transferred-bits", "%ld", (data_count * 8));
- ui_out_text (uiout, " bits in <1 sec");
+ ui_out_field_fmt (uiout, "transferred-bits", "%lu", (data_count * 8));
+ ui_out_text (uiout, " bits in <1 sec");
}
if (write_count > 0)
{
ui_out_text (uiout, ", ");
- ui_out_field_fmt (uiout, "write-rate", "%ld", data_count / write_count);
+ ui_out_field_fmt (uiout, "write-rate", "%lu", data_count / write_count);
ui_out_text (uiout, " bytes/write");
}
ui_out_text (uiout, ".\n");
-#else
- fprintf_unfiltered (stream, "Transfer rate: ");
- if (time_count > 0)
- fprintf_unfiltered (stream, "%ld bits/sec", (data_count * 8) / time_count);
- else
- fprintf_unfiltered (stream, "%ld bits in <1 sec", (data_count * 8));
- if (write_count > 0)
- fprintf_unfiltered (stream, ", %ld bytes/write", data_count / write_count);
- fprintf_unfiltered (stream, ".\n");
-#endif
}
/* This function allows the addition of incrementally linked object files.
instead a call to target_link() (in target.c) would supply the
value to use. We are now discontinuing this type of ad hoc syntax. */
-/* ARGSUSED */
static void
add_symbol_file_command (char *args, int from_tty)
{
int expecting_sec_name = 0;
int expecting_sec_addr = 0;
- struct
+ struct sect_opt
{
char *name;
char *value;
- } sect_opts[SECT_OFF_MAX];
+ };
- struct section_addr_info section_addrs;
+ struct section_addr_info *section_addrs;
+ struct sect_opt *sect_opts = NULL;
+ size_t num_sect_opts = 0;
struct cleanup *my_cleanups = make_cleanup (null_cleanup, NULL);
+ num_sect_opts = 16;
+ sect_opts = (struct sect_opt *) xmalloc (num_sect_opts
+ * sizeof (struct sect_opt));
+
dont_repeat ();
if (args == NULL)
/* Make a copy of the string that we can safely write into. */
args = xstrdup (args);
- /* Ensure section_addrs is initialized */
- memset (§ion_addrs, 0, sizeof (section_addrs));
-
while (*args != '\000')
{
/* Any leading spaces? */
to load the program. */
sect_opts[section_index].name = ".text";
sect_opts[section_index].value = arg;
- section_index++;
+ if (++section_index > num_sect_opts)
+ {
+ num_sect_opts *= 2;
+ sect_opts = ((struct sect_opt *)
+ xrealloc (sect_opts,
+ num_sect_opts
+ * sizeof (struct sect_opt)));
+ }
}
else
{
if (*arg == '-')
{
- if (strcmp (arg, "-mapped") == 0)
- flags |= OBJF_MAPPED;
- else
- if (strcmp (arg, "-readnow") == 0)
- flags |= OBJF_READNOW;
- else
- if (strcmp (arg, "-s") == 0)
- {
- if (section_index >= SECT_OFF_MAX)
- error ("Too many sections specified.");
- expecting_sec_name = 1;
- expecting_sec_addr = 1;
- }
+ if (strcmp (arg, "-readnow") == 0)
+ flags |= OBJF_READNOW;
+ else if (strcmp (arg, "-s") == 0)
+ {
+ expecting_sec_name = 1;
+ expecting_sec_addr = 1;
+ }
}
else
{
{
sect_opts[section_index].value = arg;
expecting_sec_addr = 0;
- section_index++;
+ if (++section_index > num_sect_opts)
+ {
+ num_sect_opts *= 2;
+ sect_opts = ((struct sect_opt *)
+ xrealloc (sect_opts,
+ num_sect_opts
+ * sizeof (struct sect_opt)));
+ }
}
else
error ("USAGE: add-symbol-file <filename> <textaddress> [-mapped] [-readnow] [-s <secname> <addr>]*");
/* Print the prompt for the query below. And save the arguments into
a sect_addr_info structure to be passed around to other
functions. We have to split this up into separate print
- statements because local_hex_string returns a local static
+ statements because hex_string returns a local static
string. */
-
- printf_filtered ("add symbol table from file \"%s\" at\n", filename);
+
+ printf_unfiltered ("add symbol table from file \"%s\" at\n", filename);
+ section_addrs = alloc_section_addr_info (section_index);
+ make_cleanup (xfree, section_addrs);
for (i = 0; i < section_index; i++)
{
CORE_ADDR addr;
char *val = sect_opts[i].value;
char *sec = sect_opts[i].name;
-
- val = sect_opts[i].value;
- if (val[0] == '0' && val[1] == 'x')
- addr = strtoul (val+2, NULL, 16);
- else
- addr = strtoul (val, NULL, 10);
+
+ addr = parse_and_eval_address (val);
/* Here we store the section offsets in the order they were
entered on the command line. */
- section_addrs.other[sec_num].name = sec;
- section_addrs.other[sec_num].addr = addr;
- printf_filtered ("\t%s_addr = %s\n",
- sec,
- local_hex_string ((unsigned long)addr));
+ section_addrs->other[sec_num].name = sec;
+ section_addrs->other[sec_num].addr = addr;
+ printf_unfiltered ("\t%s_addr = %s\n",
+ sec, hex_string ((unsigned long)addr));
sec_num++;
- /* The object's sections are initialized when a
+ /* The object's sections are initialized when a
call is made to build_objfile_section_table (objfile).
- This happens in reread_symbols.
+ This happens in reread_symbols.
At this point, we don't know what file type this is,
so we can't determine what section names are valid. */
}
if (from_tty && (!query ("%s", "")))
error ("Not confirmed.");
- symbol_file_add (filename, from_tty, §ion_addrs, 0, flags);
+ symbol_file_add (filename, from_tty, section_addrs, 0, flags);
/* Getting new symbols may change our opinion about what is
frameless. */
{
if (objfile->obfd)
{
-#ifdef IBM6000_TARGET
+#ifdef DEPRECATED_IBM6000_TARGET
/* If this object is from a shared library, then you should
stat on the library name, not member name. */
if (res != 0)
{
/* FIXME, should use print_sys_errmsg but it's not filtered. */
- printf_filtered ("`%s' has disappeared; keeping its symbols.\n",
+ printf_unfiltered ("`%s' has disappeared; keeping its symbols.\n",
objfile->name);
continue;
}
int num_offsets;
char *obfd_filename;
- printf_filtered ("`%s' has changed; re-reading symbols.\n",
+ printf_unfiltered ("`%s' has changed; re-reading symbols.\n",
objfile->name);
/* There are various functions like symbol_file_add,
bfd_errmsg (bfd_get_error ()));
/* Save the offsets, we will nuke them with the rest of the
- psymbol_obstack. */
+ objfile_obstack. */
num_offsets = objfile->num_sections;
- offsets = (struct section_offsets *) alloca (SIZEOF_SECTION_OFFSETS);
- memcpy (offsets, objfile->section_offsets, SIZEOF_SECTION_OFFSETS);
+ offsets = ((struct section_offsets *)
+ alloca (SIZEOF_N_SECTION_OFFSETS (num_offsets)));
+ memcpy (offsets, objfile->section_offsets,
+ SIZEOF_N_SECTION_OFFSETS (num_offsets));
/* Nuke all the state that we will re-read. Much of the following
code which sets things to NULL really is necessary to tell
/* FIXME: Do we have to free a whole linked list, or is this
enough? */
if (objfile->global_psymbols.list)
- xmfree (objfile->md, objfile->global_psymbols.list);
+ xfree (objfile->global_psymbols.list);
memset (&objfile->global_psymbols, 0,
sizeof (objfile->global_psymbols));
if (objfile->static_psymbols.list)
- xmfree (objfile->md, objfile->static_psymbols.list);
+ xfree (objfile->static_psymbols.list);
memset (&objfile->static_psymbols, 0,
sizeof (objfile->static_psymbols));
/* Free the obstacks for non-reusable objfiles */
- free_bcache (&objfile->psymbol_cache);
- obstack_free (&objfile->psymbol_obstack, 0);
- obstack_free (&objfile->symbol_obstack, 0);
- obstack_free (&objfile->type_obstack, 0);
+ bcache_xfree (objfile->psymbol_cache);
+ objfile->psymbol_cache = bcache_xmalloc ();
+ bcache_xfree (objfile->macro_cache);
+ objfile->macro_cache = bcache_xmalloc ();
+ if (objfile->demangled_names_hash != NULL)
+ {
+ htab_delete (objfile->demangled_names_hash);
+ objfile->demangled_names_hash = NULL;
+ }
+ obstack_free (&objfile->objfile_obstack, 0);
objfile->sections = NULL;
objfile->symtabs = NULL;
objfile->psymtabs = NULL;
objfile->free_psymtabs = NULL;
+ objfile->cp_namespace_symtab = NULL;
objfile->msymbols = NULL;
+ objfile->deprecated_sym_private = NULL;
objfile->minimal_symbol_count = 0;
memset (&objfile->msymbol_hash, 0,
sizeof (objfile->msymbol_hash));
memset (&objfile->msymbol_demangled_hash, 0,
sizeof (objfile->msymbol_demangled_hash));
objfile->fundamental_types = NULL;
+ clear_objfile_data (objfile);
if (objfile->sf != NULL)
{
(*objfile->sf->sym_finish) (objfile);
/* We never make this a mapped file. */
objfile->md = NULL;
- /* obstack_specify_allocation also initializes the obstack so
- it is empty. */
- obstack_specify_allocation (&objfile->psymbol_cache.cache, 0, 0,
- xmalloc, xfree);
- obstack_specify_allocation (&objfile->psymbol_obstack, 0, 0,
- xmalloc, xfree);
- obstack_specify_allocation (&objfile->symbol_obstack, 0, 0,
- xmalloc, xfree);
- obstack_specify_allocation (&objfile->type_obstack, 0, 0,
- xmalloc, xfree);
+ objfile->psymbol_cache = bcache_xmalloc ();
+ objfile->macro_cache = bcache_xmalloc ();
+ /* obstack_init also initializes the obstack so it is
+ empty. We could use obstack_specify_allocation but
+ gdb_obstack.h specifies the alloc/dealloc
+ functions. */
+ obstack_init (&objfile->objfile_obstack);
if (build_objfile_section_table (objfile))
{
error ("Can't find the file sections in `%s': %s",
objfile->name, bfd_errmsg (bfd_get_error ()));
}
+ terminate_minimal_symbol_table (objfile);
/* We use the same section offsets as from last time. I'm not
sure whether that is always correct for shared libraries. */
objfile->section_offsets = (struct section_offsets *)
- obstack_alloc (&objfile->psymbol_obstack, SIZEOF_SECTION_OFFSETS);
- memcpy (objfile->section_offsets, offsets, SIZEOF_SECTION_OFFSETS);
+ obstack_alloc (&objfile->objfile_obstack,
+ SIZEOF_N_SECTION_OFFSETS (num_offsets));
+ memcpy (objfile->section_offsets, offsets,
+ SIZEOF_N_SECTION_OFFSETS (num_offsets));
objfile->num_sections = num_offsets;
/* What the hell is sym_new_init for, anyway? The concept of
if (objfile == symfile_objfile)
{
(*objfile->sf->sym_new_init) (objfile);
-#ifdef HPUXHPPA
- RESET_HP_UX_GLOBALS ();
-#endif
}
(*objfile->sf->sym_init) (objfile);
- clear_complaints (1, 1);
+ clear_complaints (&symfile_complaints, 1, 1);
/* The "mainline" parameter is a hideous hack; I think leaving it
zero is OK since dbxread.c also does what it needs to do if
objfile->global_psymbols.size is 0. */
if (!have_partial_symbols () && !have_full_symbols ())
{
wrap_here ("");
- printf_filtered ("(no debugging symbols found)\n");
+ printf_unfiltered ("(no debugging symbols found)\n");
wrap_here ("");
}
objfile->flags |= OBJF_SYMS;
/* We're done reading the symbol file; finish off complaints. */
- clear_complaints (0, 1);
+ clear_complaints (&symfile_complaints, 0, 1);
/* Getting new symbols may change our opinion about what is
frameless. */
again now. */
objfile->mtime = new_modtime;
reread_one = 1;
-
- /* Call this after reading in a new symbol table to give target
- dependent code a crack at the new symbols. For instance, this
- could be used to update the values of target-specific symbols GDB
- needs to keep track of (such as _sigtramp, or whatever). */
-
- TARGET_SYMFILE_POSTREAD (objfile);
+ reread_separate_symbols (objfile);
}
}
}
if (reread_one)
clear_symtab_users ();
}
+
+
+/* Handle separate debug info for OBJFILE, which has just been
+ re-read:
+ - If we had separate debug info before, but now we don't, get rid
+ of the separated objfile.
+ - If we didn't have separated debug info before, but now we do,
+ read in the new separated debug info file.
+ - If the debug link points to a different file, toss the old one
+ and read the new one.
+ This function does *not* handle the case where objfile is still
+ using the same separate debug info file, but that file's timestamp
+ has changed. That case should be handled by the loop in
+ reread_symbols already. */
+static void
+reread_separate_symbols (struct objfile *objfile)
+{
+ char *debug_file;
+ unsigned long crc32;
+
+ /* Does the updated objfile's debug info live in a
+ separate file? */
+ debug_file = find_separate_debug_file (objfile);
+
+ if (objfile->separate_debug_objfile)
+ {
+ /* There are two cases where we need to get rid of
+ the old separated debug info objfile:
+ - if the new primary objfile doesn't have
+ separated debug info, or
+ - if the new primary objfile has separate debug
+ info, but it's under a different filename.
+
+ If the old and new objfiles both have separate
+ debug info, under the same filename, then we're
+ okay --- if the separated file's contents have
+ changed, we will have caught that when we
+ visited it in this function's outermost
+ loop. */
+ if (! debug_file
+ || strcmp (debug_file, objfile->separate_debug_objfile->name) != 0)
+ free_objfile (objfile->separate_debug_objfile);
+ }
+
+ /* If the new objfile has separate debug info, and we
+ haven't loaded it already, do so now. */
+ if (debug_file
+ && ! objfile->separate_debug_objfile)
+ {
+ /* Use the same section offset table as objfile itself.
+ Preserve the flags from objfile that make sense. */
+ objfile->separate_debug_objfile
+ = (symbol_file_add_with_addrs_or_offsets
+ (symfile_bfd_open (debug_file),
+ info_verbose, /* from_tty: Don't override the default. */
+ 0, /* No addr table. */
+ objfile->section_offsets, objfile->num_sections,
+ 0, /* Not mainline. See comments about this above. */
+ objfile->flags & (OBJF_REORDERED | OBJF_SHARED | OBJF_READNOW
+ | OBJF_USERLOADED)));
+ objfile->separate_debug_objfile->separate_debug_objfile_backlink
+ = objfile;
+ }
+}
+
+
\f
if (fl_table_next >= fl_table_size)
{
fl_table_size += 10;
- filename_language_table = xrealloc (filename_language_table,
- fl_table_size);
+ filename_language_table =
+ xrealloc (filename_language_table,
+ fl_table_size * sizeof (*filename_language_table));
}
filename_language_table[fl_table_next].ext = xstrdup (ext);
add_filename_language (".c++", language_cplus);
add_filename_language (".java", language_java);
add_filename_language (".class", language_java);
- add_filename_language (".ch", language_chill);
- add_filename_language (".c186", language_chill);
- add_filename_language (".c286", language_chill);
+ add_filename_language (".m", language_objc);
add_filename_language (".f", language_fortran);
add_filename_language (".F", language_fortran);
add_filename_language (".s", language_asm);
add_filename_language (".pas", language_pascal);
add_filename_language (".p", language_pascal);
add_filename_language (".pp", language_pascal);
+ add_filename_language (".adb", language_ada);
+ add_filename_language (".ads", language_ada);
+ add_filename_language (".a", language_ada);
+ add_filename_language (".ada", language_ada);
}
}
struct symtab *
allocate_symtab (char *filename, struct objfile *objfile)
{
- register struct symtab *symtab;
+ struct symtab *symtab;
symtab = (struct symtab *)
- obstack_alloc (&objfile->symbol_obstack, sizeof (struct symtab));
+ obstack_alloc (&objfile->objfile_obstack, sizeof (struct symtab));
memset (symtab, 0, sizeof (*symtab));
symtab->filename = obsavestring (filename, strlen (filename),
- &objfile->symbol_obstack);
+ &objfile->objfile_obstack);
symtab->fullname = NULL;
symtab->language = deduce_language_from_filename (filename);
symtab->debugformat = obsavestring ("unknown", 7,
- &objfile->symbol_obstack);
+ &objfile->objfile_obstack);
/* Hook it to the objfile it comes from */
}
else
psymtab = (struct partial_symtab *)
- obstack_alloc (&objfile->psymbol_obstack,
+ obstack_alloc (&objfile->objfile_obstack,
sizeof (struct partial_symtab));
memset (psymtab, 0, sizeof (struct partial_symtab));
psymtab->filename = obsavestring (filename, strlen (filename),
- &objfile->psymbol_obstack);
+ &objfile->objfile_obstack);
psymtab->symtab = NULL;
/* Prepend it to the psymtab list for the objfile it belongs to.
clear_internalvars ();
breakpoint_re_set ();
set_default_breakpoint (0, 0, 0, 0);
- current_source_symtab = 0;
- current_source_line = 0;
+ clear_current_source_symtab_and_line ();
clear_pc_function_cache ();
- if (target_new_objfile_hook)
- target_new_objfile_hook (NULL);
+ if (deprecated_target_new_objfile_hook)
+ deprecated_target_new_objfile_hook (NULL);
}
static void
This function is run after symbol reading, or from a cleanup.
If an old symbol table was obsoleted, the old symbol table
- has been blown away, but the other GDB data structures that may
+ has been blown away, but the other GDB data structures that may
reference it have not yet been cleared or re-directed. (The old
symtab was zapped, and the cleanup queued, in free_named_symtab()
below.)
partial_symbol lists (global_psymbols/static_psymbols) that
this psymtab points to. These just take up space until all
the psymtabs are reclaimed. Ditto the dependencies list and
- filename, which are all in the psymbol_obstack. */
+ filename, which are all in the objfile_obstack. */
/* We need to cashier any psymtab that has this one as a dependency... */
again:
compilation units. We want to blow away any old info about these
compilation units, regardless of which objfiles they arrived in. --gnu. */
- register struct symtab *s;
- register struct symtab *prev;
- register struct partial_symtab *ps;
+ struct symtab *s;
+ struct symtab *prev;
+ struct partial_symtab *ps;
struct blockvector *bv;
int blewit = 0;
again2:
for (ps = partial_symtab_list; ps; ps = ps->next)
{
- if (STREQ (name, ps->filename))
+ if (strcmp (name, ps->filename) == 0)
{
cashier_psymtab (ps); /* Blow it away...and its little dog, too. */
goto again2; /* Must restart, chain has been munged */
for (s = symtab_list; s; s = s->next)
{
- if (STREQ (name, s->filename))
+ if (strcmp (name, s->filename) == 0)
break;
prev = s;
}
|| BLOCK_NSYMS (BLOCKVECTOR_BLOCK (bv, GLOBAL_BLOCK))
|| BLOCK_NSYMS (BLOCKVECTOR_BLOCK (bv, STATIC_BLOCK)))
{
- complain (&oldsyms_complaint, name);
-
+ complaint (&symfile_complaints, "Replacing old symbols for `%s'",
+ name);
clear_symtab_users_queued++;
make_cleanup (clear_symtab_users_once, 0);
blewit = 1;
}
else
{
- complain (&empty_symtab_complaint, name);
+ complaint (&symfile_complaints, "Empty symbol table found for `%s'",
+ name);
}
free_symtab (s);
}
\f
/* Add a symbol with a long value to a psymtab.
- Since one arg is a struct, we pass in a ptr and deref it (sigh). */
-
-void
-add_psymbol_to_list (char *name, int namelength, namespace_enum namespace,
+ Since one arg is a struct, we pass in a ptr and deref it (sigh).
+ Return the partial symbol that has been added. */
+
+/* NOTE: carlton/2003-09-11: The reason why we return the partial
+ symbol is so that callers can get access to the symbol's demangled
+ name, which they don't have any cheap way to determine otherwise.
+ (Currenly, dwarf2read.c is the only file who uses that information,
+ though it's possible that other readers might in the future.)
+ Elena wasn't thrilled about that, and I don't blame her, but we
+ couldn't come up with a better way to get that information. If
+ it's needed in other situations, we could consider breaking up
+ SYMBOL_SET_NAMES to provide access to the demangled name lookup
+ cache. */
+
+const struct partial_symbol *
+add_psymbol_to_list (char *name, int namelength, domain_enum domain,
enum address_class class,
struct psymbol_allocation_list *list, long val, /* Value as a long */
CORE_ADDR coreaddr, /* Value as a CORE_ADDR */
enum language language, struct objfile *objfile)
{
- register struct partial_symbol *psym;
+ struct partial_symbol *psym;
char *buf = alloca (namelength + 1);
/* psymbol is static so that there will be no uninitialized gaps in the
structure which might contain random data, causing cache misses in
/* Create local copy of the partial symbol */
memcpy (buf, name, namelength);
buf[namelength] = '\0';
- SYMBOL_NAME (&psymbol) = bcache (buf, namelength + 1, &objfile->psymbol_cache);
/* val and coreaddr are mutually exclusive, one of them *will* be zero */
if (val != 0)
{
}
SYMBOL_SECTION (&psymbol) = 0;
SYMBOL_LANGUAGE (&psymbol) = language;
- PSYMBOL_NAMESPACE (&psymbol) = namespace;
+ PSYMBOL_DOMAIN (&psymbol) = domain;
PSYMBOL_CLASS (&psymbol) = class;
- SYMBOL_INIT_LANGUAGE_SPECIFIC (&psymbol, language);
+
+ SYMBOL_SET_NAMES (&psymbol, buf, namelength, objfile);
/* Stash the partial symbol away in the cache */
- psym = bcache (&psymbol, sizeof (struct partial_symbol), &objfile->psymbol_cache);
+ psym = deprecated_bcache (&psymbol, sizeof (struct partial_symbol),
+ objfile->psymbol_cache);
/* Save pointer to partial symbol in psymtab, growing symtab if needed. */
if (list->next >= list->list + list->size)
}
*list->next++ = psym;
OBJSTAT (objfile, n_psyms++);
+
+ return psym;
}
/* Add a symbol with a long value to a psymtab. This differs from
void
add_psymbol_with_dem_name_to_list (char *name, int namelength, char *dem_name,
- int dem_namelength, namespace_enum namespace,
+ int dem_namelength, domain_enum domain,
enum address_class class,
struct psymbol_allocation_list *list, long val, /* Value as a long */
CORE_ADDR coreaddr, /* Value as a CORE_ADDR */
enum language language,
struct objfile *objfile)
{
- register struct partial_symbol *psym;
+ struct partial_symbol *psym;
char *buf = alloca (namelength + 1);
/* psymbol is static so that there will be no uninitialized gaps in the
structure which might contain random data, causing cache misses in
memcpy (buf, name, namelength);
buf[namelength] = '\0';
- SYMBOL_NAME (&psymbol) = bcache (buf, namelength + 1, &objfile->psymbol_cache);
+ DEPRECATED_SYMBOL_NAME (&psymbol) = deprecated_bcache (buf, namelength + 1,
+ objfile->psymbol_cache);
buf = alloca (dem_namelength + 1);
memcpy (buf, dem_name, dem_namelength);
case language_c:
case language_cplus:
SYMBOL_CPLUS_DEMANGLED_NAME (&psymbol) =
- bcache (buf, dem_namelength + 1, &objfile->psymbol_cache);
+ deprecated_bcache (buf, dem_namelength + 1, objfile->psymbol_cache);
break;
- case language_chill:
- SYMBOL_CHILL_DEMANGLED_NAME (&psymbol) =
- bcache (buf, dem_namelength + 1, &objfile->psymbol_cache);
-
/* FIXME What should be done for the default case? Ignoring for now. */
}
}
SYMBOL_SECTION (&psymbol) = 0;
SYMBOL_LANGUAGE (&psymbol) = language;
- PSYMBOL_NAMESPACE (&psymbol) = namespace;
+ PSYMBOL_DOMAIN (&psymbol) = domain;
PSYMBOL_CLASS (&psymbol) = class;
SYMBOL_INIT_LANGUAGE_SPECIFIC (&psymbol, language);
/* Stash the partial symbol away in the cache */
- psym = bcache (&psymbol, sizeof (struct partial_symbol), &objfile->psymbol_cache);
+ psym = deprecated_bcache (&psymbol, sizeof (struct partial_symbol),
+ objfile->psymbol_cache);
/* Save pointer to partial symbol in psymtab, growing symtab if needed. */
if (list->next >= list->list + list->size)
if (objfile->global_psymbols.list)
{
- xmfree (objfile->md, (PTR) objfile->global_psymbols.list);
+ xfree (objfile->global_psymbols.list);
}
if (objfile->static_psymbols.list)
{
- xmfree (objfile->md, (PTR) objfile->static_psymbols.list);
+ xfree (objfile->static_psymbols.list);
}
/* Current best guess is that approximately a twentieth
{
objfile->global_psymbols.next =
objfile->global_psymbols.list = (struct partial_symbol **)
- xmmalloc (objfile->md, (objfile->global_psymbols.size
- * sizeof (struct partial_symbol *)));
+ xmalloc ((objfile->global_psymbols.size
+ * sizeof (struct partial_symbol *)));
}
if (objfile->static_psymbols.size > 0)
{
objfile->static_psymbols.next =
objfile->static_psymbols.list = (struct partial_symbol **)
- xmmalloc (objfile->md, (objfile->static_psymbols.size
- * sizeof (struct partial_symbol *)));
+ xmalloc ((objfile->static_psymbols.size
+ * sizeof (struct partial_symbol *)));
}
}
same VMA, each with its own unique LMA (or load address).
2) It is assumed that some runtime mechanism exists for mapping the
sections, one by one, from the load address into the VMA address.
- 3) This code provides a mechanism for gdb to keep track of which
+ 3) This code provides a mechanism for gdb to keep track of which
sections should be considered to be mapped from the VMA to the LMA.
This information is used for symbol lookup, and memory read/write.
- For instance, if a section has been mapped then its contents
+ For instance, if a section has been mapped then its contents
should be read from the VMA, otherwise from the LMA.
Two levels of debugger support for overlays are available. One is
Functional interface:
find_pc_mapped_section(pc): if the pc is in the range of a mapped
section, return that section.
- find_pc_overlay(pc): find any overlay section that contains
+ find_pc_overlay(pc): find any overlay section that contains
the pc, either in its VMA or its LMA
overlay_is_mapped(sect): true if overlay is marked as mapped
section_is_overlay(sect): true if section's VMA != LMA
/* Overlay debugging state: */
-int overlay_debugging = 0; /* 0 == off, 1 == manual, -1 == auto */
+enum overlay_debugging_state overlay_debugging = ovly_off;
int overlay_cache_invalid = 0; /* True if need to refresh mapped state */
/* Target vector for refreshing overlay mapped state */
void (*target_overlay_update) (struct obj_section *) = simple_overlay_update;
/* Function: section_is_overlay (SECTION)
- Returns true if SECTION has VMA not equal to LMA, ie.
+ Returns true if SECTION has VMA not equal to LMA, ie.
SECTION is loaded at an address different from where it will "run". */
int
section_is_overlay (asection *section)
{
+ /* FIXME: need bfd *, so we can use bfd_section_lma methods. */
+
if (overlay_debugging)
if (section && section->lma != 0 &&
section->vma != section->lma)
}
/* Function: overlay_is_mapped (SECTION)
- Returns true if section is an overlay, and is currently mapped.
+ Returns true if section is an overlay, and is currently mapped.
Private: public access is thru function section_is_mapped.
Access to the ovly_mapped flag is restricted to this function, so
switch (overlay_debugging)
{
default:
- case 0:
+ case ovly_off:
return 0; /* overlay debugging off */
- case -1: /* overlay debugging automatic */
- /* Unles there is a target_overlay_update function,
+ case ovly_auto: /* overlay debugging automatic */
+ /* Unles there is a target_overlay_update function,
there's really nothing useful to do here (can't really go auto) */
if (target_overlay_update)
{
(*target_overlay_update) (osect);
}
/* fall thru to manual case */
- case 1: /* overlay debugging manual */
+ case ovly_on: /* overlay debugging manual */
return osect->ovly_mapped == 1;
}
}
CORE_ADDR
pc_in_unmapped_range (CORE_ADDR pc, asection *section)
{
+ /* FIXME: need bfd *, so we can use bfd_section_lma methods. */
+
int size;
if (overlay_debugging)
if (section && section_is_overlay (section))
{
- size = bfd_get_section_size_before_reloc (section);
+ size = bfd_get_section_size (section);
if (section->lma <= pc && pc < section->lma + size)
return 1;
}
CORE_ADDR
pc_in_mapped_range (CORE_ADDR pc, asection *section)
{
+ /* FIXME: need bfd *, so we can use bfd_section_vma methods. */
+
int size;
if (overlay_debugging)
if (section && section_is_overlay (section))
{
- size = bfd_get_section_size_before_reloc (section);
+ size = bfd_get_section_size (section);
if (section->vma <= pc && pc < section->vma + size)
return 1;
}
/* Return true if the mapped ranges of sections A and B overlap, false
otherwise. */
-int
+static int
sections_overlap (asection *a, asection *b)
{
+ /* FIXME: need bfd *, so we can use bfd_section_vma methods. */
+
CORE_ADDR a_start = a->vma;
- CORE_ADDR a_end = a->vma + bfd_get_section_size_before_reloc (a);
+ CORE_ADDR a_end = a->vma + bfd_get_section_size (a);
CORE_ADDR b_start = b->vma;
- CORE_ADDR b_end = b->vma + bfd_get_section_size_before_reloc (b);
+ CORE_ADDR b_end = b->vma + bfd_get_section_size (b);
return (a_start < b_end && b_start < a_end);
}
CORE_ADDR
overlay_unmapped_address (CORE_ADDR pc, asection *section)
{
+ /* FIXME: need bfd *, so we can use bfd_section_lma methods. */
+
if (overlay_debugging)
if (section && section_is_overlay (section) &&
pc_in_mapped_range (pc, section))
CORE_ADDR
overlay_mapped_address (CORE_ADDR pc, asection *section)
{
+ /* FIXME: need bfd *, so we can use bfd_section_vma methods. */
+
if (overlay_debugging)
if (section && section_is_overlay (section) &&
pc_in_unmapped_range (pc, section))
}
-/* Function: symbol_overlayed_address
+/* Function: symbol_overlayed_address
Return one of two addresses (relative to the VMA or to the LMA),
depending on whether the section is mapped or not. */
return address;
}
-/* Function: find_pc_overlay (PC)
+/* Function: find_pc_overlay (PC)
Return the best-match overlay section for PC:
If PC matches a mapped overlay section's VMA, return that section.
Else if PC matches an unmapped section's VMA, return that section.
}
/* Function: find_pc_mapped_section (PC)
- If PC falls into the VMA address range of an overlay section that is
+ If PC falls into the VMA address range of an overlay section that is
currently marked as MAPPED, return that section. Else return NULL. */
asection *
vma = bfd_section_vma (objfile->obfd, osect->the_bfd_section);
lma = bfd_section_lma (objfile->obfd, osect->the_bfd_section);
- size = bfd_get_section_size_before_reloc (osect->the_bfd_section);
+ size = bfd_get_section_size (osect->the_bfd_section);
name = bfd_section_name (objfile->obfd, osect->the_bfd_section);
printf_filtered ("Section %s, loaded at ", name);
sec2->the_bfd_section))
{
if (info_verbose)
- printf_filtered ("Note: section %s unmapped by overlap\n",
+ printf_unfiltered ("Note: section %s unmapped by overlap\n",
bfd_section_name (objfile->obfd,
sec2->the_bfd_section));
sec2->ovly_mapped = 0; /* sec2 overlaps sec: unmap sec2 */
}
/* Function: unmap_overlay_command
- Mark the overlay section as unmapped
+ Mark the overlay section as unmapped
(ie. resident in its LMA address range, rather than the VMA range). */
void
static void
overlay_auto_command (char *args, int from_tty)
{
- overlay_debugging = -1;
+ overlay_debugging = ovly_auto;
+ enable_overlay_breakpoints ();
if (info_verbose)
- printf_filtered ("Automatic overlay debugging enabled.");
+ printf_unfiltered ("Automatic overlay debugging enabled.");
}
/* Function: overlay_manual_command
static void
overlay_manual_command (char *args, int from_tty)
{
- overlay_debugging = 1;
+ overlay_debugging = ovly_on;
+ disable_overlay_breakpoints ();
if (info_verbose)
- printf_filtered ("Overlay debugging enabled.");
+ printf_unfiltered ("Overlay debugging enabled.");
}
/* Function: overlay_off_command
static void
overlay_off_command (char *args, int from_tty)
{
- overlay_debugging = 0;
+ overlay_debugging = ovly_off;
+ disable_overlay_breakpoints ();
if (info_verbose)
- printf_filtered ("Overlay debugging disabled.");
+ printf_unfiltered ("Overlay debugging disabled.");
}
static void
/* Target Overlays for the "Simplest" overlay manager:
- This is GDB's default target overlay layer. It works with the
- minimal overlay manager supplied as an example by Cygnus. The
- entry point is via a function pointer "target_overlay_update",
- so targets that use a different runtime overlay manager can
+ This is GDB's default target overlay layer. It works with the
+ minimal overlay manager supplied as an example by Cygnus. The
+ entry point is via a function pointer "target_overlay_update",
+ so targets that use a different runtime overlay manager can
substitute their own overlay_update function and take over the
function pointer.
}
#endif
-/* Function: simple_overlay_update_1
+/* Function: simple_overlay_update_1
A helper function for simple_overlay_update. Assuming a cached copy
of _ovly_table exists, look through it to find an entry whose vma,
lma and size match those of OSECT. Re-read the entry and make sure
simple_overlay_update_1 (struct obj_section *osect)
{
int i, size;
+ bfd *obfd = osect->objfile->obfd;
+ asection *bsect = osect->the_bfd_section;
- size = bfd_get_section_size_before_reloc (osect->the_bfd_section);
+ size = bfd_get_section_size (osect->the_bfd_section);
for (i = 0; i < cache_novlys; i++)
- if (cache_ovly_table[i][VMA] == osect->the_bfd_section->vma &&
- cache_ovly_table[i][LMA] == osect->the_bfd_section->lma /* &&
- cache_ovly_table[i][SIZE] == size */ )
+ if (cache_ovly_table[i][VMA] == bfd_section_vma (obfd, bsect)
+ && cache_ovly_table[i][LMA] == bfd_section_lma (obfd, bsect)
+ /* && cache_ovly_table[i][SIZE] == size */ )
{
read_target_long_array (cache_ovly_table_base + i * TARGET_LONG_BYTES,
(int *) cache_ovly_table[i], 4);
- if (cache_ovly_table[i][VMA] == osect->the_bfd_section->vma &&
- cache_ovly_table[i][LMA] == osect->the_bfd_section->lma /* &&
- cache_ovly_table[i][SIZE] == size */ )
+ if (cache_ovly_table[i][VMA] == bfd_section_vma (obfd, bsect)
+ && cache_ovly_table[i][LMA] == bfd_section_lma (obfd, bsect)
+ /* && cache_ovly_table[i][SIZE] == size */ )
{
osect->ovly_mapped = cache_ovly_table[i][MAPPED];
return 1;
}
- else /* Warning! Warning! Target's ovly table has changed! */
+ else /* Warning! Warning! Target's ovly table has changed! */
return 0;
}
return 0;
}
/* Function: simple_overlay_update
- If OSECT is NULL, then update all sections' mapped state
- (after re-reading the entire target _ovly_table).
- If OSECT is non-NULL, then try to find a matching entry in the
+ If OSECT is NULL, then update all sections' mapped state
+ (after re-reading the entire target _ovly_table).
+ If OSECT is non-NULL, then try to find a matching entry in the
cached ovly_table and update only OSECT's mapped state.
- If a cached entry can't be found or the cache isn't valid, then
+ If a cached entry can't be found or the cache isn't valid, then
re-read the entire cache, and go ahead and update all sections. */
static void
if (section_is_overlay (osect->the_bfd_section))
{
int i, size;
+ bfd *obfd = osect->objfile->obfd;
+ asection *bsect = osect->the_bfd_section;
- size = bfd_get_section_size_before_reloc (osect->the_bfd_section);
+ size = bfd_get_section_size (bsect);
for (i = 0; i < cache_novlys; i++)
- if (cache_ovly_table[i][VMA] == osect->the_bfd_section->vma &&
- cache_ovly_table[i][LMA] == osect->the_bfd_section->lma /* &&
- cache_ovly_table[i][SIZE] == size */ )
- { /* obj_section matches i'th entry in ovly_table */
+ if (cache_ovly_table[i][VMA] == bfd_section_vma (obfd, bsect)
+ && cache_ovly_table[i][LMA] == bfd_section_lma (obfd, bsect)
+ /* && cache_ovly_table[i][SIZE] == size */ )
+ { /* obj_section matches i'th entry in ovly_table */
osect->ovly_mapped = cache_ovly_table[i][MAPPED];
break; /* finished with inner for loop: break out */
}
}
}
+/* Set the output sections and output offsets for section SECTP in
+ ABFD. The relocation code in BFD will read these offsets, so we
+ need to be sure they're initialized. We map each section to itself,
+ with no offset; this means that SECTP->vma will be honored. */
+
+static void
+symfile_dummy_outputs (bfd *abfd, asection *sectp, void *dummy)
+{
+ sectp->output_section = sectp;
+ sectp->output_offset = 0;
+}
+
+/* Relocate the contents of a debug section SECTP in ABFD. The
+ contents are stored in BUF if it is non-NULL, or returned in a
+ malloc'd buffer otherwise.
+
+ For some platforms and debug info formats, shared libraries contain
+ relocations against the debug sections (particularly for DWARF-2;
+ one affected platform is PowerPC GNU/Linux, although it depends on
+ the version of the linker in use). Also, ELF object files naturally
+ have unresolved relocations for their debug sections. We need to apply
+ the relocations in order to get the locations of symbols correct. */
+
+bfd_byte *
+symfile_relocate_debug_section (bfd *abfd, asection *sectp, bfd_byte *buf)
+{
+ /* We're only interested in debugging sections with relocation
+ information. */
+ if ((sectp->flags & SEC_RELOC) == 0)
+ return NULL;
+ if ((sectp->flags & SEC_DEBUGGING) == 0)
+ return NULL;
+
+ /* We will handle section offsets properly elsewhere, so relocate as if
+ all sections begin at 0. */
+ bfd_map_over_sections (abfd, symfile_dummy_outputs, NULL);
+
+ return bfd_simple_get_relocated_section_contents (abfd, sectp, buf, NULL);
+}
void
_initialize_symfile (void)
"Load symbol table from executable file FILE.\n\
The `file' command can also load symbol tables, as well as setting the file\n\
to execute.", &cmdlist);
- c->completer = filename_completer;
+ set_cmd_completer (c, filename_completer);
c = add_cmd ("add-symbol-file", class_files, add_symbol_file_command,
"Usage: add-symbol-file FILE ADDR [-s <SECT> <SECT_ADDR> -s <SECT> <SECT_ADDR> ...]\n\
ADDR is the starting address of the file's text.\n\
The optional arguments are section-name section-address pairs and\n\
should be specified if the data and bss segments are not contiguous\n\
-with the text. SECT is a section name to be loaded at SECT_ADDR.",
+with the text. SECT is a section name to be loaded at SECT_ADDR.",
&cmdlist);
- c->completer = filename_completer;
+ set_cmd_completer (c, filename_completer);
c = add_cmd ("add-shared-symbol-files", class_files,
add_shared_symbol_files_command,
c = add_cmd ("load", class_files, load_command,
"Dynamically load FILE into the running program, and record its symbols\n\
for access from GDB.", &cmdlist);
- c->completer = filename_completer;
+ set_cmd_completer (c, filename_completer);
- add_show_from_set
+ deprecated_add_show_from_set
(add_set_cmd ("symbol-reloading", class_support, var_boolean,
(char *) &symbol_reloading,
"Set dynamic symbol table reloading multiple times in one run.",
"Set mapping between filename extension and source language.\n\
Usage: set extension-language .foo bar",
&setlist);
- c->function.cfunc = set_ext_lang_command;
+ set_cmd_cfunc (c, set_ext_lang_command);
add_info ("extensions", info_ext_lang_command,
"All filename extensions associated with a source language.");
- add_show_from_set
+ deprecated_add_show_from_set
(add_set_cmd ("download-write-size", class_obscure,
var_integer, (char *) &download_write_size,
"Set the write size used when downloading a program.\n"
"cache.\n",
&setlist),
&showlist);
+
+ debug_file_directory = xstrdup (DEBUGDIR);
+ c = (add_set_cmd
+ ("debug-file-directory", class_support, var_string,
+ (char *) &debug_file_directory,
+ "Set the directory where separate debug symbols are searched for.\n"
+ "Separate debug symbols are first searched for in the same\n"
+ "directory as the binary, then in the `" DEBUG_SUBDIRECTORY
+ "' subdirectory,\n"
+ "and lastly at the path of the directory of the binary with\n"
+ "the global debug-file directory prepended\n",
+ &setlist));
+ deprecated_add_show_from_set (c, &showlist);
+ set_cmd_completer (c, filename_completer);
}