/* Generic symbol file reading for the GNU debugger, GDB.
- Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
- Free Software Foundation, Inc.
+ Copyright (C) 1990-2013 Free Software Foundation, Inc.
Contributed by Cygnus Support, using pieces from other GDB modules.
#include "elf-bfd.h"
#include "solib.h"
#include "remote.h"
+#include "stack.h"
+#include "gdb_bfd.h"
+#include "cli/cli-utils.h"
#include <sys/types.h>
#include <fcntl.h>
#include "psymtab.h"
-int (*deprecated_ui_load_progress_hook) (const char *section, unsigned long num);
+int (*deprecated_ui_load_progress_hook) (const char *section,
+ unsigned long num);
void (*deprecated_show_load_progress) (const char *section,
unsigned long section_sent,
unsigned long section_size,
static void clear_symtab_users_cleanup (void *ignore);
-/* Global variables owned by this file */
-int readnow_symbol_files; /* Read full symbols immediately */
+/* Global variables owned by this file. */
+int readnow_symbol_files; /* Read full symbols immediately. */
-/* External variables and functions referenced. */
-
-extern void report_transfer_performance (unsigned long, time_t, time_t);
-
-/* Functions this file defines */
-
-#if 0
-static int simple_read_overlay_region_table (void);
-static void simple_free_overlay_region_table (void);
-#endif
+/* Functions this file defines. */
static void load_command (char *, int);
static void add_symbol_file_command (char *, int);
-bfd *symfile_bfd_open (char *);
-
-int get_section_index (struct objfile *, char *);
-
-static struct sym_fns *find_sym_fns (bfd *);
+static const struct sym_fns *find_sym_fns (bfd *);
static void decrement_reading_symtab (void *);
static void overlay_invalidate_all (void);
-void list_overlays_command (char *, int);
-
-void map_overlay_command (char *, int);
-
-void unmap_overlay_command (char *, int);
-
static void overlay_auto_command (char *, int);
static void overlay_manual_command (char *, int);
/* List of all available sym_fns. On gdb startup, each object file reader
calls add_symtab_fns() to register information on each format it is
- prepared to read. */
+ prepared to read. */
-static struct sym_fns *symtab_fns = NULL;
+typedef const struct sym_fns *sym_fns_ptr;
+DEF_VEC_P (sym_fns_ptr);
-/* Flag for whether user will be reloading symbols multiple times.
- Defaults to ON for VxWorks, otherwise OFF. */
-
-#ifdef SYMBOL_RELOADING_DEFAULT
-int symbol_reloading = SYMBOL_RELOADING_DEFAULT;
-#else
-int symbol_reloading = 0;
-#endif
-static void
-show_symbol_reloading (struct ui_file *file, int from_tty,
- struct cmd_list_element *c, const char *value)
-{
- fprintf_filtered (file, _("\
-Dynamic symbol table reloading multiple times in one run is %s.\n"),
- value);
-}
+static VEC (sym_fns_ptr) *symtab_fns = NULL;
/* If non-zero, shared library symbols will be added automatically
when the inferior is created, new libraries are loaded, or when
this flag and then add the shared library symbols as needed. Note
that there is a potential for confusion, since if the shared
library symbols are not loaded, commands like "info fun" will *not*
- report all the functions that are actually present. */
+ report all the functions that are actually present. */
int auto_solib_add = 1;
-
-/* For systems that support it, a threshold size in megabytes. If
- automatically adding a new library's symbol table to those already
- known to the debugger would cause the total shared library symbol
- size to exceed this threshhold, then the shlib's symbols are not
- added. The threshold is ignored if the user explicitly asks for a
- shlib to be added, such as when using the "sharedlibrary"
- command. */
-
-int auto_solib_limit;
\f
-/* Make a null terminated copy of the string at PTR with SIZE characters in
- the obstack pointed to by OBSTACKP . Returns the address of the copy.
- Note that the string at PTR does not have to be null terminated, I.E. it
- may be part of a larger string and we are only saving a substring. */
-
-char *
-obsavestring (const char *ptr, int size, struct obstack *obstackp)
-{
- char *p = (char *) obstack_alloc (obstackp, size + 1);
- /* Open-coded memcpy--saves function call time. These strings are usually
- short. FIXME: Is this really still true with a compiler that can
- inline memcpy? */
- {
- const char *p1 = ptr;
- char *p2 = p;
- const char *end = ptr + size;
-
- while (p1 != end)
- *p2++ = *p1++;
- }
- p[size] = 0;
- return p;
-}
-
-/* Concatenate NULL terminated variable argument list of `const char *' strings;
- return the new string. Space is found in the OBSTACKP. Argument list must
- be terminated by a sentinel expression `(char *) NULL'. */
-
-char *
-obconcat (struct obstack *obstackp, ...)
-{
- va_list ap;
-
- va_start (ap, obstackp);
- for (;;)
- {
- const char *s = va_arg (ap, const char *);
-
- if (s == NULL)
- break;
-
- obstack_grow_str (obstackp, s);
- }
- va_end (ap);
- obstack_1grow (obstackp, 0);
-
- return obstack_finish (obstackp);
-}
-
-/* True if we are reading a symbol table. */
+/* True if we are reading a symbol table. */
int currently_reading_symtab = 0;
decrement_reading_symtab (void *dummy)
{
currently_reading_symtab--;
+ gdb_assert (currently_reading_symtab >= 0);
}
/* Increment currently_reading_symtab and return a cleanup that can be
used to decrement it. */
+
struct cleanup *
increment_reading_symtab (void)
{
++currently_reading_symtab;
+ gdb_assert (currently_reading_symtab > 0);
return make_cleanup (decrement_reading_symtab, NULL);
}
*lowest = sect;
}
-/* Create a new section_addr_info, with room for NUM_SECTIONS. */
+/* Create a new section_addr_info, with room for NUM_SECTIONS. The
+ new object's 'num_sections' field is set to 0; it must be updated
+ by the caller. */
struct section_addr_info *
alloc_section_addr_info (size_t num_sections)
+ sizeof (struct other_sections) * (num_sections - 1));
sap = (struct section_addr_info *) xmalloc (size);
memset (sap, 0, size);
- sap->num_sections = num_sections;
return sap;
}
/* Build (allocate and populate) a section_addr_info struct from
- an existing section table. */
+ an existing section table. */
extern struct section_addr_info *
build_section_addr_info_from_section_table (const struct target_section *start,
sap->other[oidx].addr = stp->addr;
sap->other[oidx].name
= xstrdup (bfd_section_name (stp->bfd, stp->the_bfd_section));
- sap->other[oidx].sectindex = stp->the_bfd_section->index;
+ sap->other[oidx].sectindex
+ = gdb_bfd_section_index (stp->bfd, stp->the_bfd_section);
oidx++;
}
}
+ sap->num_sections = oidx;
+
return sap;
}
{
sap->other[i].addr = bfd_get_section_vma (abfd, sec);
sap->other[i].name = xstrdup (bfd_get_section_name (abfd, sec));
- sap->other[i].sectindex = sec->index;
+ sap->other[i].sectindex = gdb_bfd_section_index (abfd, sec);
i++;
}
+
+ sap->num_sections = i;
+
return sap;
}
gdb_assert (objfile->num_sections == bfd_count_sections (objfile->obfd));
*/
sap = build_section_addr_info_from_bfd (objfile->obfd);
- for (i = 0; i < sap->num_sections && sap->other[i].name; i++)
+ for (i = 0; i < sap->num_sections; i++)
{
int sectindex = sap->other[i].sectindex;
return sap;
}
-/* Free all memory allocated by build_section_addr_info_from_section_table. */
+/* Free all memory allocated by build_section_addr_info_from_section_table. */
extern void
free_section_addr_info (struct section_addr_info *sap)
int idx;
for (idx = 0; idx < sap->num_sections; idx++)
- if (sap->other[idx].name)
- xfree (sap->other[idx].name);
+ xfree (sap->other[idx].name);
xfree (sap);
}
-
/* Initialize OBJFILE's sect_index_* members. */
+
static void
init_objfile_sect_indices (struct objfile *objfile)
{
return;
/* If the user specified an offset, honor it. */
- if (offsets[sect->index] != 0)
+ if (offsets[gdb_bfd_section_index (abfd, sect)] != 0)
return;
/* Otherwise, let's try to find a place for the section. */
}
while (!done);
- offsets[sect->index] = start_addr;
+ offsets[gdb_bfd_section_index (abfd, sect)] = start_addr;
arg->lowest = start_addr + bfd_get_section_size (sect);
}
void
relative_addr_info_to_section_offsets (struct section_offsets *section_offsets,
int num_sections,
- struct section_addr_info *addrs)
+ const struct section_addr_info *addrs)
{
int i;
memset (section_offsets, 0, SIZEOF_N_SECTION_OFFSETS (num_sections));
- /* Now calculate offsets for section that were specified by the caller. */
- for (i = 0; i < addrs->num_sections && addrs->other[i].name; i++)
+ /* Now calculate offsets for section that were specified by the caller. */
+ for (i = 0; i < addrs->num_sections; i++)
{
- struct other_sections *osp;
+ const struct other_sections *osp;
osp = &addrs->other[i];
- if (osp->addr == 0)
+ if (osp->sectindex == -1)
continue;
- /* Record all sections in offsets */
+ /* Record all sections in offsets. */
/* The section_offsets in the objfile are here filled in using
- the BFD index. */
+ the BFD index. */
section_offsets->offsets[osp->sectindex] = osp->addr;
}
}
+/* Transform section name S for a name comparison. prelink can split section
+ `.bss' into two sections `.dynbss' and `.bss' (in this order). Similarly
+ prelink can split `.sbss' into `.sdynbss' and `.sbss'. Use virtual address
+ of the new `.dynbss' (`.sdynbss') section as the adjacent new `.bss'
+ (`.sbss') section has invalid (increased) virtual address. */
+
+static const char *
+addr_section_name (const char *s)
+{
+ if (strcmp (s, ".dynbss") == 0)
+ return ".bss";
+ if (strcmp (s, ".sdynbss") == 0)
+ return ".sbss";
+
+ return s;
+}
+
/* qsort comparator for addrs_section_sort. Sort entries in ascending order by
their (name, sectindex) pair. sectindex makes the sort by name stable. */
{
const struct other_sections *a = *((struct other_sections **) ap);
const struct other_sections *b = *((struct other_sections **) bp);
- int retval, a_idx, b_idx;
+ int retval;
- retval = strcmp (a->name, b->name);
+ retval = strcmp (addr_section_name (a->name), addr_section_name (b->name));
if (retval)
return retval;
- /* SECTINDEX is undefined iff ADDR is zero. */
- a_idx = a->addr == 0 ? 0 : a->sectindex;
- b_idx = b->addr == 0 ? 0 : b->sectindex;
- return a_idx - b_idx;
+ return a->sectindex - b->sectindex;
}
/* Provide sorted array of pointers to sections of ADDRS. The array is
/* `+ 1' for the NULL terminator. */
array = xmalloc (sizeof (*array) * (addrs->num_sections + 1));
- for (i = 0; i < addrs->num_sections && addrs->other[i].name; i++)
+ for (i = 0; i < addrs->num_sections; i++)
array[i] = &addrs->other[i];
array[i] = NULL;
abfd_addrs_sorted = addrs_section_sort (abfd_addrs);
make_cleanup (xfree, abfd_addrs_sorted);
- /* Now create ADDRS_TO_ABFD_ADDRS from ADDRS_SORTED and ABFD_ADDRS_SORTED. */
+ /* Now create ADDRS_TO_ABFD_ADDRS from ADDRS_SORTED and
+ ABFD_ADDRS_SORTED. */
addrs_to_abfd_addrs = xzalloc (sizeof (*addrs_to_abfd_addrs)
* addrs->num_sections);
while (*addrs_sorted)
{
- const char *sect_name = (*addrs_sorted)->name;
+ const char *sect_name = addr_section_name ((*addrs_sorted)->name);
while (*abfd_addrs_sorted
- && strcmp ((*abfd_addrs_sorted)->name, sect_name) < 0)
+ && strcmp (addr_section_name ((*abfd_addrs_sorted)->name),
+ sect_name) < 0)
abfd_addrs_sorted++;
if (*abfd_addrs_sorted
- && strcmp ((*abfd_addrs_sorted)->name, sect_name) == 0)
+ && strcmp (addr_section_name ((*abfd_addrs_sorted)->name),
+ sect_name) == 0)
{
int index_in_addrs;
(the loadable section directly below it in memory).
this_offset = lower_offset = lower_addr - lower_orig_addr */
- for (i = 0; i < addrs->num_sections && addrs->other[i].name; i++)
+ for (i = 0; i < addrs->num_sections; i++)
{
- const char *sect_name = addrs->other[i].name;
struct other_sections *sect = addrs_to_abfd_addrs[i];
if (sect)
{
- /* This is the index used by BFD. */
+ /* This is the index used by BFD. */
addrs->other[i].sectindex = sect->sectindex;
if (addrs->other[i].addr != 0)
}
else
{
+ /* addr_section_name transformation is not used for SECT_NAME. */
+ const char *sect_name = addrs->other[i].name;
+
/* This section does not exist in ABFD, which is normally
unexpected and we want to issue a warning.
a warning. Shared libraries contain just the section
".gnu.liblist" but it is not marked as loadable there. There is
no other way to identify them than by their name as the sections
- created by prelink have no special flags. */
+ created by prelink have no special flags.
+
+ For the sections `.bss' and `.sbss' see addr_section_name. */
if (!(strcmp (sect_name, ".gnu.liblist") == 0
|| strcmp (sect_name, ".gnu.conflict") == 0
- || strcmp (sect_name, ".dynbss") == 0
- || strcmp (sect_name, ".sdynbss") == 0))
+ || (strcmp (sect_name, ".bss") == 0
+ && i > 0
+ && strcmp (addrs->other[i - 1].name, ".dynbss") == 0
+ && addrs_to_abfd_addrs[i - 1] != NULL)
+ || (strcmp (sect_name, ".sbss") == 0
+ && i > 0
+ && strcmp (addrs->other[i - 1].name, ".sdynbss") == 0
+ && addrs_to_abfd_addrs[i - 1] != NULL)))
warning (_("section %s not found in %s"), sect_name,
bfd_get_filename (abfd));
addrs->other[i].addr = 0;
-
- /* SECTINDEX is invalid if ADDR is zero. */
+ addrs->other[i].sectindex = -1;
}
}
void
default_symfile_offsets (struct objfile *objfile,
- struct section_addr_info *addrs)
+ const struct section_addr_info *addrs)
{
- objfile->num_sections = bfd_count_sections (objfile->obfd);
+ objfile->num_sections = gdb_bfd_count_sections (objfile->obfd);
objfile->section_offsets = (struct section_offsets *)
obstack_alloc (&objfile->objfile_obstack,
SIZEOF_N_SECTION_OFFSETS (objfile->num_sections));
continue;
bfd_set_section_vma (abfd, cur_sec, offsets[cur_sec->index]);
- exec_set_section_address (bfd_get_filename (abfd), cur_sec->index,
+ exec_set_section_address (bfd_get_filename (abfd),
+ cur_sec->index,
offsets[cur_sec->index]);
offsets[cur_sec->index] = 0;
}
}
/* Remember the bfd indexes for the .text, .data, .bss and
- .rodata sections. */
+ .rodata sections. */
init_objfile_sect_indices (objfile);
}
-
/* Divide the file into segments, which are individual relocatable units.
This is the default version of the sym_fns.sym_segments function for
symbol readers that do not have an explicit representation of segments.
return data;
}
+/* This is a convenience function to call sym_read for OBJFILE and
+ possibly force the partial symbols to be read. */
+
+static void
+read_symbols (struct objfile *objfile, int add_flags)
+{
+ (*objfile->sf->sym_read) (objfile, add_flags);
+
+ /* find_separate_debug_file_in_section should be called only if there is
+ single binary with no existing separate debug info file. */
+ if (!objfile_has_partial_symbols (objfile)
+ && objfile->separate_debug_objfile == NULL
+ && objfile->separate_debug_objfile_backlink == NULL)
+ {
+ bfd *abfd = find_separate_debug_file_in_section (objfile);
+ struct cleanup *cleanup = make_cleanup_bfd_unref (abfd);
+
+ if (abfd != NULL)
+ symbol_file_add_separate (abfd, add_flags, objfile);
+
+ do_cleanups (cleanup);
+ }
+ if ((add_flags & SYMFILE_NO_READ) == 0)
+ require_partial_symbols (objfile, 0);
+}
+
+/* Initialize entry point information for this objfile. */
+
+static void
+init_entry_point_info (struct objfile *objfile)
+{
+ /* Save startup file's range of PC addresses to help blockframe.c
+ decide where the bottom of the stack is. */
+
+ if (bfd_get_file_flags (objfile->obfd) & EXEC_P)
+ {
+ /* Executable file -- record its entry point so we'll recognize
+ the startup file because it contains the entry point. */
+ objfile->ei.entry_point = bfd_get_start_address (objfile->obfd);
+ objfile->ei.entry_point_p = 1;
+ }
+ else if (bfd_get_file_flags (objfile->obfd) & DYNAMIC
+ && bfd_get_start_address (objfile->obfd) != 0)
+ {
+ /* Some shared libraries may have entry points set and be
+ runnable. There's no clear way to indicate this, so just check
+ for values other than zero. */
+ objfile->ei.entry_point = bfd_get_start_address (objfile->obfd);
+ objfile->ei.entry_point_p = 1;
+ }
+ else
+ {
+ /* Examination of non-executable.o files. Short-circuit this stuff. */
+ objfile->ei.entry_point_p = 0;
+ }
+
+ if (objfile->ei.entry_point_p)
+ {
+ CORE_ADDR entry_point = objfile->ei.entry_point;
+
+ /* Make certain that the address points at real code, and not a
+ function descriptor. */
+ entry_point
+ = gdbarch_convert_from_func_ptr_addr (objfile->gdbarch,
+ entry_point,
+ ¤t_target);
+
+ /* Remove any ISA markers, so that this matches entries in the
+ symbol table. */
+ objfile->ei.entry_point
+ = gdbarch_addr_bits_remove (objfile->gdbarch, entry_point);
+ }
+}
+
/* Process a symbol file, as either the main file or as a dynamically
loaded file.
+ This function does not set the OBJFILE's entry-point info.
+
OBJFILE is where the symbols are to be read from.
ADDRS is the list of section load addresses. If the user has given
into an offset from the section VMA's as it appears in the object
file, and then call the file's sym_offsets function to convert this
into a format-specific offset table --- a `struct section_offsets'.
- If ADDRS is non-zero, OFFSETS must be zero.
-
- OFFSETS is a table of section offsets already in the right
- format-specific representation. NUM_OFFSETS is the number of
- elements present in OFFSETS->offsets. If OFFSETS is non-zero, we
- assume this is the proper table the call to sym_offsets described
- above would produce. Instead of calling sym_offsets, we just dump
- it right into objfile->section_offsets. (When we're re-reading
- symbols from an objfile, we don't have the original load address
- list any more; all we have is the section offset table.) If
- OFFSETS is non-zero, ADDRS must be zero.
ADD_FLAGS encodes verbosity level, whether this is main symbol or
an extra symbol file such as dynamically loaded code, and wether
breakpoint reset should be deferred. */
-void
-syms_from_objfile (struct objfile *objfile,
- struct section_addr_info *addrs,
- struct section_offsets *offsets,
- int num_offsets,
- int add_flags)
+static void
+syms_from_objfile_1 (struct objfile *objfile,
+ struct section_addr_info *addrs,
+ int add_flags)
{
struct section_addr_info *local_addr = NULL;
struct cleanup *old_chain;
const int mainline = add_flags & SYMFILE_MAINLINE;
- gdb_assert (! (addrs && offsets));
-
- init_entry_point_info (objfile);
objfile->sf = find_sym_fns (objfile->obfd);
if (objfile->sf == NULL)
- return; /* No symbols. */
+ {
+ /* No symbols to load, but we still need to make sure
+ that the section_offsets table is allocated. */
+ int num_sections = gdb_bfd_count_sections (objfile->obfd);
+ size_t size = SIZEOF_N_SECTION_OFFSETS (num_sections);
+
+ objfile->num_sections = num_sections;
+ objfile->section_offsets
+ = obstack_alloc (&objfile->objfile_obstack, size);
+ memset (objfile->section_offsets, 0, size);
+ return;
+ }
/* Make sure that partially constructed symbol tables will be cleaned up
if an error occurs during symbol reading. */
old_chain = make_cleanup_free_objfile (objfile);
- /* If ADDRS and OFFSETS are both NULL, put together a dummy address
- list. We now establish the convention that an addr of zero means
- no load address was specified. */
- if (! addrs && ! offsets)
+ /* If ADDRS is NULL, put together a dummy address list.
+ We now establish the convention that an addr of zero means
+ no load address was specified. */
+ if (! addrs)
{
- local_addr
- = alloc_section_addr_info (bfd_count_sections (objfile->obfd));
+ local_addr = alloc_section_addr_info (1);
make_cleanup (xfree, local_addr);
addrs = local_addr;
}
- /* Now either addrs or offsets is non-zero. */
-
if (mainline)
{
/* We will modify the main symbol table, make sure that all its users
We no longer warn if the lowest section is not a text segment (as
happens for the PA64 port. */
- if (addrs && addrs->other[0].name)
+ if (addrs->num_sections > 0)
addr_info_make_relative (addrs, objfile->obfd);
/* Initialize symbol reading routines for this objfile, allow complaints to
appear for this new file, and record how verbose to be, then do the
- initial symbol reading for this file. */
+ initial symbol reading for this file. */
(*objfile->sf->sym_init) (objfile);
clear_complaints (&symfile_complaints, 1, add_flags & SYMFILE_VERBOSE);
- if (addrs)
- (*objfile->sf->sym_offsets) (objfile, addrs);
- else
- {
- size_t size = SIZEOF_N_SECTION_OFFSETS (num_offsets);
-
- /* Just copy in the offset table directly as given to us. */
- objfile->num_sections = num_offsets;
- objfile->section_offsets
- = ((struct section_offsets *)
- obstack_alloc (&objfile->objfile_obstack, size));
- memcpy (objfile->section_offsets, offsets, size);
-
- init_objfile_sect_indices (objfile);
- }
+ (*objfile->sf->sym_offsets) (objfile, addrs);
- (*objfile->sf->sym_read) (objfile, add_flags);
+ read_symbols (objfile, add_flags);
/* Discard cleanups as symbol reading was successful. */
xfree (local_addr);
}
+/* Same as syms_from_objfile_1, but also initializes the objfile
+ entry-point info. */
+
+static void
+syms_from_objfile (struct objfile *objfile,
+ struct section_addr_info *addrs,
+ int add_flags)
+{
+ syms_from_objfile_1 (objfile, addrs, add_flags);
+ init_entry_point_info (objfile);
+}
+
/* Perform required actions after either reading in the initial
symbols for a new objfile, or mapping in the symbols from a reusable
- objfile. */
+ objfile. ADD_FLAGS is a bitmask of enum symfile_add_flags. */
void
new_symfile_objfile (struct objfile *objfile, int add_flags)
{
/* If this is the main symbol file we have to clean up all users of the
- old main symbol file. Otherwise it is sufficient to fixup all the
+ old main symbol file. Otherwise it is sufficient to fixup all the
breakpoints that may have been redefined by this symbol file. */
if (add_flags & SYMFILE_MAINLINE)
{
/* OK, make it the "real" symbol file. */
symfile_objfile = objfile;
- clear_symtab_users ();
+ clear_symtab_users (add_flags);
}
else if ((add_flags & SYMFILE_DEFER_BP_RESET) == 0)
{
loaded file.
ABFD is a BFD already open on the file, as from symfile_bfd_open.
- This BFD will be closed on error, and is always consumed by this function.
+ A new reference is acquired by this function.
ADD_FLAGS encodes verbosity, whether this is main symbol file or
extra, such as dynamically loaded code, and what to do with breakpoins.
- ADDRS, OFFSETS, and NUM_OFFSETS are as described for
- syms_from_objfile, above.
+ ADDRS is as described for syms_from_objfile_1, above.
ADDRS is ignored when SYMFILE_MAINLINE bit is set in ADD_FLAGS.
+ PARENT is the original objfile if ABFD is a separate debug info file.
+ Otherwise PARENT is NULL.
+
Upon success, returns a pointer to the objfile that was added.
- Upon failure, jumps back to command level (never returns). */
+ Upon failure, jumps back to command level (never returns). */
static struct objfile *
-symbol_file_add_with_addrs_or_offsets (bfd *abfd,
- int add_flags,
- struct section_addr_info *addrs,
- struct section_offsets *offsets,
- int num_offsets,
- int flags)
+symbol_file_add_with_addrs (bfd *abfd, int add_flags,
+ struct section_addr_info *addrs,
+ int flags, struct objfile *parent)
{
struct objfile *objfile;
- struct cleanup *my_cleanups;
const char *name = bfd_get_filename (abfd);
const int from_tty = add_flags & SYMFILE_VERBOSE;
+ const int mainline = add_flags & SYMFILE_MAINLINE;
+ const int should_print = ((from_tty || info_verbose)
+ && (readnow_symbol_files
+ || (add_flags & SYMFILE_NO_READ) == 0));
if (readnow_symbol_files)
- flags |= OBJF_READNOW;
-
- my_cleanups = make_cleanup_bfd_close (abfd);
+ {
+ flags |= OBJF_READNOW;
+ add_flags &= ~SYMFILE_NO_READ;
+ }
/* Give user a chance to burp if we'd be
interactively wiping out any existing symbols. */
if ((have_full_symbols () || have_partial_symbols ())
- && (add_flags & SYMFILE_MAINLINE)
+ && mainline
&& from_tty
&& !query (_("Load new symbol table from \"%s\"? "), name))
error (_("Not confirmed."));
- objfile = allocate_objfile (abfd, flags);
- discard_cleanups (my_cleanups);
+ objfile = allocate_objfile (abfd, flags | (mainline ? OBJF_MAINLINE : 0));
+
+ if (parent)
+ add_separate_debug_objfile (objfile, parent);
/* We either created a new mapped symbol table, mapped an existing
symbol table file which has not had initial symbol reading
- performed, or need to read an unmapped symbol table. */
- if (from_tty || info_verbose)
+ performed, or need to read an unmapped symbol table. */
+ if (should_print)
{
if (deprecated_pre_add_symbol_hook)
deprecated_pre_add_symbol_hook (name);
gdb_flush (gdb_stdout);
}
}
- syms_from_objfile (objfile, addrs, offsets, num_offsets,
- add_flags);
+ syms_from_objfile (objfile, addrs, add_flags);
/* We now have at least a partial symbol table. Check to see if the
user requested that all symbols be read on initial access via either
the gdb startup command line or on a per symbol file basis. Expand
- all partial symbol tables for this objfile if so. */
+ all partial symbol tables for this objfile if so. */
if ((flags & OBJF_READNOW))
{
- if (from_tty || info_verbose)
+ if (should_print)
{
printf_unfiltered (_("expanding to full symbols..."));
wrap_here ("");
objfile->sf->qf->expand_all_symtabs (objfile);
}
- if ((from_tty || info_verbose)
- && !objfile_has_symbols (objfile))
+ if (should_print && !objfile_has_symbols (objfile))
{
wrap_here ("");
printf_unfiltered (_("(no debugging symbols found)..."));
wrap_here ("");
}
- if (from_tty || info_verbose)
+ if (should_print)
{
if (deprecated_post_add_symbol_hook)
deprecated_post_add_symbol_hook ();
time. */
gdb_flush (gdb_stdout);
- do_cleanups (my_cleanups);
-
if (objfile->sf == NULL)
{
observer_notify_new_objfile (objfile);
- return objfile; /* No symbols. */
+ return objfile; /* No symbols. */
}
new_symfile_objfile (objfile, add_flags);
sap = build_section_addr_info_from_objfile (objfile);
my_cleanup = make_cleanup_free_section_addr_info (sap);
- new_objfile = symbol_file_add_with_addrs_or_offsets
- (bfd, symfile_flags,
- sap, NULL, 0,
+ new_objfile = symbol_file_add_with_addrs
+ (bfd, symfile_flags, sap,
objfile->flags & (OBJF_REORDERED | OBJF_SHARED | OBJF_READNOW
- | OBJF_USERLOADED));
+ | OBJF_USERLOADED),
+ objfile);
do_cleanups (my_cleanup);
-
- add_separate_debug_objfile (new_objfile, objfile);
}
/* Process the symbol file ABFD, as either the main file or as a
dynamically loaded file.
+ See symbol_file_add_with_addrs's comments for details. */
- See symbol_file_add_with_addrs_or_offsets's comments for
- details. */
struct objfile *
symbol_file_add_from_bfd (bfd *abfd, int add_flags,
struct section_addr_info *addrs,
- int flags)
+ int flags, struct objfile *parent)
{
- return symbol_file_add_with_addrs_or_offsets (abfd, add_flags, addrs, 0, 0,
- flags);
+ return symbol_file_add_with_addrs (abfd, add_flags, addrs, flags, parent);
}
-
/* Process a symbol file, as either the main file or as a dynamically
- loaded file. See symbol_file_add_with_addrs_or_offsets's comments
- for details. */
+ loaded file. See symbol_file_add_with_addrs's comments for details. */
+
struct objfile *
symbol_file_add (char *name, int add_flags, struct section_addr_info *addrs,
int flags)
{
- return symbol_file_add_from_bfd (symfile_bfd_open (name), add_flags, addrs,
- flags);
-}
+ bfd *bfd = symfile_bfd_open (name);
+ struct cleanup *cleanup = make_cleanup_bfd_unref (bfd);
+ struct objfile *objf;
+ objf = symbol_file_add_from_bfd (bfd, add_flags, addrs, flags, NULL);
+ do_cleanups (cleanup);
+ return objf;
+}
/* Call symbol_file_add() with default values and update whatever is
affected by the loading of a new main().
static void
symbol_file_add_main_1 (char *args, int from_tty, int flags)
{
- const int add_flags = SYMFILE_MAINLINE | (from_tty ? SYMFILE_VERBOSE : 0);
+ const int add_flags = (current_inferior ()->symfile_flags
+ | SYMFILE_MAINLINE | (from_tty ? SYMFILE_VERBOSE : 0));
+
symbol_file_add (args, add_flags, NULL, flags);
/* Getting new symbols may change our opinion about
what is frameless. */
reinit_frame_cache ();
- set_initial_language ();
+ if ((flags & SYMFILE_NO_READ) == 0)
+ set_initial_language ();
}
void
printf_unfiltered (_("No symbol file now.\n"));
}
-static char *
-get_debug_link_info (struct objfile *objfile, unsigned long *crc32_out)
-{
- asection *sect;
- bfd_size_type debuglink_size;
- unsigned long crc32;
- char *contents;
- int crc_offset;
-
- sect = bfd_get_section_by_name (objfile->obfd, ".gnu_debuglink");
-
- if (sect == NULL)
- return NULL;
-
- debuglink_size = bfd_section_size (objfile->obfd, sect);
-
- contents = xmalloc (debuglink_size);
- bfd_get_section_contents (objfile->obfd, sect, contents,
- (file_ptr)0, (bfd_size_type)debuglink_size);
-
- /* Crc value is stored after the filename, aligned up to 4 bytes. */
- crc_offset = strlen (contents) + 1;
- crc_offset = (crc_offset + 3) & ~3;
-
- crc32 = bfd_get_32 (objfile->obfd, (bfd_byte *) (contents + crc_offset));
-
- *crc32_out = crc32;
- return contents;
-}
-
static int
separate_debug_file_exists (const char *name, unsigned long crc,
struct objfile *parent_objfile)
{
- unsigned long file_crc = 0;
+ unsigned long file_crc;
+ int file_crc_p;
bfd *abfd;
- gdb_byte buffer[8*1024];
- int count;
struct stat parent_stat, abfd_stat;
+ int verified_as_different;
/* Find a separate debug info file as if symbols would be present in
PARENT_OBJFILE itself this function would not be called. .gnu_debuglink
section can contain just the basename of PARENT_OBJFILE without any
".debug" suffix as "/usr/lib/debug/path/to/file" is a separate tree where
- the separate debug infos with the same basename can exist. */
+ the separate debug infos with the same basename can exist. */
- if (strcmp (name, parent_objfile->name) == 0)
+ if (filename_cmp (name, parent_objfile->name) == 0)
return 0;
- abfd = bfd_open_maybe_remote (name);
+ abfd = gdb_bfd_open_maybe_remote (name);
if (!abfd)
return 0;
- /* Verify symlinks were not the cause of strcmp name difference above.
+ /* Verify symlinks were not the cause of filename_cmp name difference above.
Some operating systems, e.g. Windows, do not provide a meaningful
st_ino; they always set it to zero. (Windows does provide a
negatives. */
if (bfd_stat (abfd, &abfd_stat) == 0
- && bfd_stat (parent_objfile->obfd, &parent_stat) == 0
- && abfd_stat.st_dev == parent_stat.st_dev
- && abfd_stat.st_ino == parent_stat.st_ino
- && abfd_stat.st_ino != 0)
+ && abfd_stat.st_ino != 0
+ && bfd_stat (parent_objfile->obfd, &parent_stat) == 0)
{
- bfd_close (abfd);
- return 0;
+ if (abfd_stat.st_dev == parent_stat.st_dev
+ && abfd_stat.st_ino == parent_stat.st_ino)
+ {
+ gdb_bfd_unref (abfd);
+ return 0;
+ }
+ verified_as_different = 1;
}
+ else
+ verified_as_different = 0;
+
+ file_crc_p = gdb_bfd_crc (abfd, &file_crc);
- while ((count = bfd_bread (buffer, sizeof (buffer), abfd)) > 0)
- file_crc = gnu_debuglink_crc32 (file_crc, buffer, count);
+ gdb_bfd_unref (abfd);
- bfd_close (abfd);
+ if (!file_crc_p)
+ return 0;
if (crc != file_crc)
{
- warning (_("the debug information found in \"%s\""
- " does not match \"%s\" (CRC mismatch).\n"),
- name, parent_objfile->name);
+ unsigned long parent_crc;
+
+ /* If one (or both) the files are accessed for example the via "remote:"
+ gdbserver way it does not support the bfd_stat operation. Verify
+ whether those two files are not the same manually. */
+
+ if (!verified_as_different)
+ {
+ if (!gdb_bfd_crc (parent_objfile->obfd, &parent_crc))
+ return 0;
+ }
+
+ if (verified_as_different || parent_crc != file_crc)
+ warning (_("the debug information found in \"%s\""
+ " does not match \"%s\" (CRC mismatch).\n"),
+ name, parent_objfile->name);
+
return 0;
}
show_debug_file_directory (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-The directory where separate debug symbols are searched for is \"%s\".\n"),
+ fprintf_filtered (file,
+ _("The directory where separate debug "
+ "symbols are searched for is \"%s\".\n"),
value);
}
#define DEBUG_SUBDIRECTORY ".debug"
#endif
-char *
-find_separate_debug_file_by_debuglink (struct objfile *objfile)
+/* Find a separate debuginfo file for OBJFILE, using DIR as the directory
+ where the original file resides (may not be the same as
+ dirname(objfile->name) due to symlinks), and DEBUGLINK as the file we are
+ looking for. CANON_DIR is the "realpath" form of DIR.
+ DIR must contain a trailing '/'.
+ Returns the path of the file with separate debug info, of NULL. */
+
+static char *
+find_separate_debug_file (const char *dir,
+ const char *canon_dir,
+ const char *debuglink,
+ unsigned long crc32, struct objfile *objfile)
{
- char *basename, *debugdir;
- char *dir = NULL;
- char *debugfile = NULL;
- char *canon_name = NULL;
- unsigned long crc32;
+ char *debugdir;
+ char *debugfile;
int i;
+ VEC (char_ptr) *debugdir_vec;
+ struct cleanup *back_to;
+ int ix;
- basename = get_debug_link_info (objfile, &crc32);
-
- if (basename == NULL)
- /* There's no separate debug info, hence there's no way we could
- load it => no warning. */
- goto cleanup_return_debugfile;
-
- dir = xstrdup (objfile->name);
-
- /* Strip off the final filename part, leaving the directory name,
- followed by a slash. Objfile names should always be absolute and
- tilde-expanded, so there should always be a slash in there
- somewhere. */
- for (i = strlen(dir) - 1; i >= 0; i--)
- {
- if (IS_DIR_SEPARATOR (dir[i]))
- break;
- }
- gdb_assert (i >= 0 && IS_DIR_SEPARATOR (dir[i]));
- dir[i+1] = '\0';
-
- /* Set I to max (strlen (canon_name), strlen (dir)). */
- canon_name = lrealpath (dir);
+ /* Set I to max (strlen (canon_dir), strlen (dir)). */
i = strlen (dir);
- if (canon_name && strlen (canon_name) > i)
- i = strlen (canon_name);
+ if (canon_dir != NULL && strlen (canon_dir) > i)
+ i = strlen (canon_dir);
debugfile = xmalloc (strlen (debug_file_directory) + 1
+ i
+ strlen (DEBUG_SUBDIRECTORY)
+ strlen ("/")
- + strlen (basename)
+ + strlen (debuglink)
+ 1);
/* First try in the same directory as the original file. */
strcpy (debugfile, dir);
- strcat (debugfile, basename);
+ strcat (debugfile, debuglink);
if (separate_debug_file_exists (debugfile, crc32, objfile))
- goto cleanup_return_debugfile;
+ return debugfile;
/* Then try in the subdirectory named DEBUG_SUBDIRECTORY. */
strcpy (debugfile, dir);
strcat (debugfile, DEBUG_SUBDIRECTORY);
strcat (debugfile, "/");
- strcat (debugfile, basename);
+ strcat (debugfile, debuglink);
if (separate_debug_file_exists (debugfile, crc32, objfile))
- goto cleanup_return_debugfile;
+ return debugfile;
/* Then try in the global debugfile directories.
-
+
Keep backward compatibility so that DEBUG_FILE_DIRECTORY being "" will
cause "/..." lookups. */
- debugdir = debug_file_directory;
- do
- {
- char *debugdir_end;
+ debugdir_vec = dirnames_to_char_ptr_vec (debug_file_directory);
+ back_to = make_cleanup_free_char_ptr_vec (debugdir_vec);
- while (*debugdir == DIRNAME_SEPARATOR)
- debugdir++;
-
- debugdir_end = strchr (debugdir, DIRNAME_SEPARATOR);
- if (debugdir_end == NULL)
- debugdir_end = &debugdir[strlen (debugdir)];
-
- memcpy (debugfile, debugdir, debugdir_end - debugdir);
- debugfile[debugdir_end - debugdir] = 0;
+ for (ix = 0; VEC_iterate (char_ptr, debugdir_vec, ix, debugdir); ++ix)
+ {
+ strcpy (debugfile, debugdir);
strcat (debugfile, "/");
strcat (debugfile, dir);
- strcat (debugfile, basename);
+ strcat (debugfile, debuglink);
if (separate_debug_file_exists (debugfile, crc32, objfile))
- goto cleanup_return_debugfile;
+ {
+ do_cleanups (back_to);
+ return debugfile;
+ }
/* If the file is in the sysroot, try using its base path in the
global debugfile directory. */
- if (canon_name
- && strncmp (canon_name, gdb_sysroot, strlen (gdb_sysroot)) == 0
- && IS_DIR_SEPARATOR (canon_name[strlen (gdb_sysroot)]))
+ if (canon_dir != NULL
+ && filename_ncmp (canon_dir, gdb_sysroot,
+ strlen (gdb_sysroot)) == 0
+ && IS_DIR_SEPARATOR (canon_dir[strlen (gdb_sysroot)]))
{
- memcpy (debugfile, debugdir, debugdir_end - debugdir);
- debugfile[debugdir_end - debugdir] = 0;
- strcat (debugfile, canon_name + strlen (gdb_sysroot));
+ strcpy (debugfile, debugdir);
+ strcat (debugfile, canon_dir + strlen (gdb_sysroot));
strcat (debugfile, "/");
- strcat (debugfile, basename);
+ strcat (debugfile, debuglink);
if (separate_debug_file_exists (debugfile, crc32, objfile))
- goto cleanup_return_debugfile;
+ {
+ do_cleanups (back_to);
+ return debugfile;
+ }
}
-
- debugdir = debugdir_end;
}
- while (*debugdir != 0);
-
+
+ do_cleanups (back_to);
xfree (debugfile);
- debugfile = NULL;
+ return NULL;
+}
-cleanup_return_debugfile:
- xfree (canon_name);
- xfree (basename);
- xfree (dir);
- return debugfile;
+/* Modify PATH to contain only "[/]directory/" part of PATH.
+ If there were no directory separators in PATH, PATH will be empty
+ string on return. */
+
+static void
+terminate_after_last_dir_separator (char *path)
+{
+ int i;
+
+ /* Strip off the final filename part, leaving the directory name,
+ followed by a slash. The directory can be relative or absolute. */
+ for (i = strlen(path) - 1; i >= 0; i--)
+ if (IS_DIR_SEPARATOR (path[i]))
+ break;
+
+ /* If I is -1 then no directory is present there and DIR will be "". */
+ path[i + 1] = '\0';
}
+/* Find separate debuginfo for OBJFILE (using .gnu_debuglink section).
+ Returns pathname, or NULL. */
+
+char *
+find_separate_debug_file_by_debuglink (struct objfile *objfile)
+{
+ char *debuglink;
+ char *dir, *canon_dir;
+ char *debugfile;
+ unsigned long crc32;
+ struct cleanup *cleanups;
+
+ debuglink = bfd_get_debug_link_info (objfile->obfd, &crc32);
+
+ if (debuglink == NULL)
+ {
+ /* There's no separate debug info, hence there's no way we could
+ load it => no warning. */
+ return NULL;
+ }
+
+ cleanups = make_cleanup (xfree, debuglink);
+ dir = xstrdup (objfile->name);
+ make_cleanup (xfree, dir);
+ terminate_after_last_dir_separator (dir);
+ canon_dir = lrealpath (dir);
+
+ debugfile = find_separate_debug_file (dir, canon_dir, debuglink,
+ crc32, objfile);
+ xfree (canon_dir);
+
+ if (debugfile == NULL)
+ {
+#ifdef HAVE_LSTAT
+ /* For PR gdb/9538, try again with realpath (if different from the
+ original). */
+
+ struct stat st_buf;
+
+ if (lstat (objfile->name, &st_buf) == 0 && S_ISLNK(st_buf.st_mode))
+ {
+ char *symlink_dir;
+
+ symlink_dir = lrealpath (objfile->name);
+ if (symlink_dir != NULL)
+ {
+ make_cleanup (xfree, symlink_dir);
+ terminate_after_last_dir_separator (symlink_dir);
+ if (strcmp (dir, symlink_dir) != 0)
+ {
+ /* Different directory, so try using it. */
+ debugfile = find_separate_debug_file (symlink_dir,
+ symlink_dir,
+ debuglink,
+ crc32,
+ objfile);
+ }
+ }
+ }
+#endif /* HAVE_LSTAT */
+ }
+
+ do_cleanups (cleanups);
+ return debugfile;
+}
/* This is the symbol-file command. Read the file, analyze its
symbols, and add a struct symtab to a symtab list. The syntax of
void
set_initial_language (void)
{
- char *filename;
enum language lang = language_unknown;
- filename = find_main_filename ();
- if (filename != NULL)
- lang = deduce_language_from_filename (filename);
+ if (language_of_main != language_unknown)
+ lang = language_of_main;
+ else
+ {
+ const char *filename;
+
+ filename = find_main_filename ();
+ if (filename != NULL)
+ lang = deduce_language_from_filename (filename);
+ }
if (lang == language_unknown)
{
}
/* If NAME is a remote name open the file using remote protocol, otherwise
- open it normally. */
+ open it normally. Returns a new reference to the BFD. On error,
+ returns NULL with the BFD error set. */
bfd *
-bfd_open_maybe_remote (const char *name)
+gdb_bfd_open_maybe_remote (const char *name)
{
+ bfd *result;
+
if (remote_filename_p (name))
- return remote_bfd_open (name, gnutarget);
+ result = remote_bfd_open (name, gnutarget);
else
- return bfd_openr (name, gnutarget);
-}
+ result = gdb_bfd_open (name, gnutarget, -1);
+ return result;
+}
/* Open the file specified by NAME and hand it off to BFD for
preliminary analysis. Return a newly initialized bfd *, which
bfd *sym_bfd;
int desc;
char *absolute_name;
+ struct cleanup *back_to;
if (remote_filename_p (name))
{
- name = xstrdup (name);
sym_bfd = remote_bfd_open (name, gnutarget);
if (!sym_bfd)
- {
- make_cleanup (xfree, name);
- error (_("`%s': can't open to read symbols: %s."), name,
- bfd_errmsg (bfd_get_error ()));
- }
+ error (_("`%s': can't open to read symbols: %s."), name,
+ bfd_errmsg (bfd_get_error ()));
if (!bfd_check_format (sym_bfd, bfd_object))
{
- bfd_close (sym_bfd);
- make_cleanup (xfree, name);
+ make_cleanup_bfd_unref (sym_bfd);
error (_("`%s': can't read symbols: %s."), name,
bfd_errmsg (bfd_get_error ()));
}
perror_with_name (name);
}
- /* Free 1st new malloc'd copy, but keep the 2nd malloc'd copy in
- bfd. It'll be freed in free_objfile(). */
xfree (name);
name = absolute_name;
+ back_to = make_cleanup (xfree, name);
- sym_bfd = bfd_fopen (name, gnutarget, FOPEN_RB, desc);
+ sym_bfd = gdb_bfd_open (name, gnutarget, desc);
if (!sym_bfd)
- {
- close (desc);
- make_cleanup (xfree, name);
- error (_("`%s': can't open to read symbols: %s."), name,
- bfd_errmsg (bfd_get_error ()));
- }
+ error (_("`%s': can't open to read symbols: %s."), name,
+ bfd_errmsg (bfd_get_error ()));
bfd_set_cacheable (sym_bfd, 1);
if (!bfd_check_format (sym_bfd, bfd_object))
{
- /* FIXME: should be checking for errors from bfd_close (for one
- thing, on error it does not free all the storage associated
- with the bfd). */
- bfd_close (sym_bfd); /* This also closes desc. */
- make_cleanup (xfree, name);
+ make_cleanup_bfd_unref (sym_bfd);
error (_("`%s': can't read symbols: %s."), name,
bfd_errmsg (bfd_get_error ()));
}
- /* bfd_usrdata exists for applications and libbfd must not touch it. */
- gdb_assert (bfd_usrdata (sym_bfd) == NULL);
+ do_cleanups (back_to);
return sym_bfd;
}
/* Link SF into the global symtab_fns list. Called on startup by the
_initialize routine in each object file format reader, to register
- information about each format the the reader is prepared to
- handle. */
+ information about each format the reader is prepared to handle. */
void
-add_symtab_fns (struct sym_fns *sf)
+add_symtab_fns (const struct sym_fns *sf)
{
- sf->next = symtab_fns;
- symtab_fns = sf;
+ VEC_safe_push (sym_fns_ptr, symtab_fns, sf);
}
/* Initialize OBJFILE to read symbols from its associated BFD. It
struct sym_fns in the objfile structure, that contains cached
information about the symbol file. */
-static struct sym_fns *
+static const struct sym_fns *
find_sym_fns (bfd *abfd)
{
- struct sym_fns *sf;
+ const struct sym_fns *sf;
enum bfd_flavour our_flavour = bfd_get_flavour (abfd);
+ int i;
if (our_flavour == bfd_target_srec_flavour
|| our_flavour == bfd_target_ihex_flavour
|| our_flavour == bfd_target_tekhex_flavour)
return NULL; /* No symbols. */
- for (sf = symtab_fns; sf != NULL; sf = sf->next)
+ for (i = 0; VEC_iterate (sym_fns_ptr, symtab_fns, i, sf); ++i)
if (our_flavour == sf->sym_flavour)
return sf;
static void
load_command (char *arg, int from_tty)
{
+ struct cleanup *cleanup = make_cleanup (null_cleanup, NULL);
+
+ dont_repeat ();
+
/* The user might be reloading because the binary has changed. Take
this opportunity to check. */
reopen_exec_file ();
/* After re-loading the executable, we don't really know which
overlays are mapped any more. */
overlay_cache_invalid = 1;
+
+ do_cleanups (cleanup);
}
/* This version of "load" should be usable for any target. Currently
/* Opaque data for load_section_callback. */
struct load_section_data {
- unsigned long load_offset;
+ CORE_ADDR load_offset;
struct load_progress_data *progress_data;
VEC(memory_write_request_s) *requests;
};
{
/* The write is just starting. Let the user know we've started
this section. */
- ui_out_message (uiout, 0, "Loading section %s, size %s lma %s\n",
+ ui_out_message (current_uiout, 0, "Loading section %s, size %s lma %s\n",
args->section_name, hex_string (args->section_size),
- paddress (target_gdbarch, args->lma));
+ paddress (target_gdbarch (), args->lma));
return;
}
if (target_read_memory (args->lma, check, bytes) != 0)
error (_("Download verify read failed at %s"),
- paddress (target_gdbarch, args->lma));
+ paddress (target_gdbarch (), args->lma));
if (memcmp (args->buffer, check, bytes) != 0)
error (_("Download verify compare failed at %s"),
- paddress (target_gdbarch, args->lma));
+ paddress (target_gdbarch (), args->lma));
do_cleanups (verify_cleanups);
}
totals->data_count += bytes;
args->buffer += bytes;
totals->write_count += 1;
args->section_sent += bytes;
- if (quit_flag
+ if (check_quit_flag ()
|| (deprecated_ui_load_progress_hook != NULL
&& deprecated_ui_load_progress_hook (args->section_name,
args->section_sent)))
memset (new_request, 0, sizeof (struct memory_write_request));
section_data = xcalloc (1, sizeof (struct load_progress_section_data));
new_request->begin = bfd_section_lma (abfd, asec) + args->load_offset;
- new_request->end = new_request->begin + size; /* FIXME Should size be in instead? */
+ new_request->end = new_request->begin + size; /* FIXME Should size
+ be in instead? */
new_request->data = xmalloc (size);
new_request->baton = section_data;
struct cleanup *old_cleanups = make_cleanup (null_cleanup, 0);
struct load_section_data cbdata;
struct load_progress_data total_progress;
+ struct ui_out *uiout = current_uiout;
CORE_ADDR entry;
char **argv;
if (argv[1] != NULL)
{
- char *endptr;
+ const char *endptr;
- cbdata.load_offset = strtoul (argv[1], &endptr, 0);
+ cbdata.load_offset = strtoulst (argv[1], &endptr, 0);
/* If the last word was not a valid number then
treat it as a file name with spaces in. */
error (_("Too many parameters."));
}
- /* Open the file for loading. */
- loadfile_bfd = bfd_openr (filename, gnutarget);
+ /* Open the file for loading. */
+ loadfile_bfd = gdb_bfd_open (filename, gnutarget, -1);
if (loadfile_bfd == NULL)
{
perror_with_name (filename);
return;
}
- /* FIXME: should be checking for errors from bfd_close (for one thing,
- on error it does not free all the storage associated with the
- bfd). */
- make_cleanup_bfd_close (loadfile_bfd);
+ make_cleanup_bfd_unref (loadfile_bfd);
if (!bfd_check_format (loadfile_bfd, bfd_object))
{
gettimeofday (&end_time, NULL);
entry = bfd_get_start_address (loadfile_bfd);
+ entry = gdbarch_addr_bits_remove (target_gdbarch (), entry);
ui_out_text (uiout, "Start address ");
- ui_out_field_fmt (uiout, "address", "%s", paddress (target_gdbarch, entry));
+ ui_out_field_fmt (uiout, "address", "%s", paddress (target_gdbarch (), entry));
ui_out_text (uiout, ", load size ");
ui_out_field_fmt (uiout, "load-size", "%lu", total_progress.data_count);
ui_out_text (uiout, "\n");
do_cleanups (old_cleanups);
}
-/* Report how fast the transfer went. */
-
-/* DEPRECATED: cagney/1999-10-18: report_transfer_performance is being
- replaced by print_transfer_performance (with a very different
- function signature). */
-
-void
-report_transfer_performance (unsigned long data_count, time_t start_time,
- time_t end_time)
-{
- struct timeval start, end;
-
- start.tv_sec = start_time;
- start.tv_usec = 0;
- end.tv_sec = end_time;
- end.tv_usec = 0;
-
- print_transfer_performance (gdb_stdout, data_count, 0, &start, &end);
-}
+/* Report how fast the transfer went. */
void
print_transfer_performance (struct ui_file *stream,
const struct timeval *end_time)
{
ULONGEST time_count;
+ struct ui_out *uiout = current_uiout;
/* Compute the elapsed time in milliseconds, as a tradeoff between
accuracy and overflow. */
monitor for Microware's OS-9 / OS-9000, see remote-os9k.c). In the
rombug case, the user doesn't need to supply a text address,
instead a call to target_link() (in target.c) would supply the
- value to use. We are now discontinuing this type of ad hoc syntax. */
+ value to use. We are now discontinuing this type of ad hoc syntax. */
static void
add_symbol_file_command (char *args, int from_tty)
for (arg = argv[0], argcnt = 0; arg != NULL; arg = argv[++argcnt])
{
- /* Process the argument. */
+ /* Process the argument. */
if (argcnt == 0)
{
- /* The first argument is the file name. */
+ /* The first argument is the file name. */
filename = tilde_expand (arg);
make_cleanup (xfree, filename);
}
if (argcnt == 1)
{
/* The second argument is always the text address at which
- to load the program. */
+ to load the program. */
sect_opts[section_index].name = ".text";
sect_opts[section_index].value = arg;
if (++section_index >= num_sect_opts)
else
{
/* It's an option (starting with '-') or it's an argument
- to an option */
+ to an option. */
if (*arg == '-')
{
}
}
else
- error (_("USAGE: add-symbol-file <filename> <textaddress> [-mapped] [-readnow] [-s <secname> <addr>]*"));
+ error (_("USAGE: add-symbol-file <filename> <textaddress>"
+ " [-readnow] [-s <secname> <addr>]*"));
}
}
}
if (section_index < 1)
error (_("The address where %s has been loaded is missing"), filename);
- /* Print the prompt for the query below. And save the arguments into
+ /* Print the prompt for the query below. And save the arguments into
a sect_addr_info structure to be passed around to other
functions. We have to split this up into separate print
statements because hex_string returns a local static
- string. */
+ string. */
printf_unfiltered (_("add symbol table from file \"%s\" at\n"), filename);
section_addrs = alloc_section_addr_info (section_index);
addr = parse_and_eval_address (val);
/* Here we store the section offsets in the order they were
- entered on the command line. */
+ entered on the command line. */
section_addrs->other[sec_num].name = sec;
section_addrs->other[sec_num].addr = addr;
printf_unfiltered ("\t%s_addr = %s\n", sec,
At this point, we don't know what file type this is,
so we can't determine what section names are valid. */
}
+ section_addrs->num_sections = sec_num;
if (from_tty && (!query ("%s", "")))
error (_("Not confirmed."));
}
\f
+typedef struct objfile *objfilep;
+
+DEF_VEC_P (objfilep);
+
/* Re-read symbols if a symbol-file has changed. */
+
void
reread_symbols (void)
{
struct objfile *objfile;
long new_modtime;
- int reread_one = 0;
struct stat new_statbuf;
int res;
+ VEC (objfilep) *new_objfiles = NULL;
+ struct cleanup *all_cleanups;
+
+ all_cleanups = make_cleanup (VEC_cleanup (objfilep), &new_objfiles);
/* With the addition of shared libraries, this should be modified,
the load time should be saved in the partial symbol tables, since
different tables may come from different source files. FIXME.
This routine should then walk down each partial symbol table
- and see if the symbol table that it originates from has been changed */
+ and see if the symbol table that it originates from has been changed. */
for (objfile = object_files; objfile; objfile = objfile->next)
{
res = stat (objfile->name, &new_statbuf);
if (res != 0)
{
- /* FIXME, should use print_sys_errmsg but it's not filtered. */
+ /* FIXME, should use print_sys_errmsg but it's not filtered. */
printf_unfiltered (_("`%s' has disappeared; keeping its symbols.\n"),
objfile->name);
continue;
/* We need to do this whenever any symbols go away. */
make_cleanup (clear_symtab_users_cleanup, 0 /*ignore*/);
- if (exec_bfd != NULL && strcmp (bfd_get_filename (objfile->obfd),
- bfd_get_filename (exec_bfd)) == 0)
+ if (exec_bfd != NULL
+ && filename_cmp (bfd_get_filename (objfile->obfd),
+ bfd_get_filename (exec_bfd)) == 0)
{
/* Reload EXEC_BFD without asking anything. */
exec_file_attach (bfd_get_filename (objfile->obfd), 0);
}
- /* Clean up any state BFD has sitting around. We don't need
- to close the descriptor but BFD lacks a way of closing the
- BFD without closing the descriptor. */
- obfd_filename = bfd_get_filename (objfile->obfd);
- if (!bfd_close (objfile->obfd))
- error (_("Can't close BFD for %s: %s"), objfile->name,
- bfd_errmsg (bfd_get_error ()));
- objfile->obfd = bfd_open_maybe_remote (obfd_filename);
- if (objfile->obfd == NULL)
- error (_("Can't open %s to read symbols."), objfile->name);
- else
- objfile->obfd = gdb_bfd_ref (objfile->obfd);
- /* bfd_openr sets cacheable to true, which is what we want. */
- if (!bfd_check_format (objfile->obfd, bfd_object))
- error (_("Can't read symbols from %s: %s."), objfile->name,
- bfd_errmsg (bfd_get_error ()));
+ /* Keep the calls order approx. the same as in free_objfile. */
- /* Save the offsets, we will nuke them with the rest of the
- objfile_obstack. */
- num_offsets = objfile->num_sections;
- offsets = ((struct section_offsets *)
- alloca (SIZEOF_N_SECTION_OFFSETS (num_offsets)));
- memcpy (offsets, objfile->section_offsets,
- SIZEOF_N_SECTION_OFFSETS (num_offsets));
+ /* Free the separate debug objfiles. It will be
+ automatically recreated by sym_read. */
+ free_objfile_separate_debug (objfile);
/* Remove any references to this objfile in the global
value lists. */
clear_objfile_data (objfile);
- /* Free the separate debug objfiles. It will be
- automatically recreated by sym_read. */
- free_objfile_separate_debug (objfile);
+ /* Clean up any state BFD has sitting around. */
+ {
+ struct bfd *obfd = objfile->obfd;
+
+ obfd_filename = bfd_get_filename (objfile->obfd);
+ /* Open the new BFD before freeing the old one, so that
+ the filename remains live. */
+ objfile->obfd = gdb_bfd_open_maybe_remote (obfd_filename);
+ if (objfile->obfd == NULL)
+ {
+ /* We have to make a cleanup and error here, rather
+ than erroring later, because once we unref OBFD,
+ OBFD_FILENAME will be freed. */
+ make_cleanup_bfd_unref (obfd);
+ error (_("Can't open %s to read symbols."), obfd_filename);
+ }
+ gdb_bfd_unref (obfd);
+ }
+
+ objfile->name = bfd_get_filename (objfile->obfd);
+ /* bfd_openr sets cacheable to true, which is what we want. */
+ if (!bfd_check_format (objfile->obfd, bfd_object))
+ error (_("Can't read symbols from %s: %s."), objfile->name,
+ bfd_errmsg (bfd_get_error ()));
+
+ /* Save the offsets, we will nuke them with the rest of the
+ objfile_obstack. */
+ num_offsets = objfile->num_sections;
+ offsets = ((struct section_offsets *)
+ alloca (SIZEOF_N_SECTION_OFFSETS (num_offsets)));
+ memcpy (offsets, objfile->section_offsets,
+ SIZEOF_N_SECTION_OFFSETS (num_offsets));
/* FIXME: Do we have to free a whole linked list, or is this
enough? */
memset (&objfile->static_psymbols, 0,
sizeof (objfile->static_psymbols));
- /* Free the obstacks for non-reusable objfiles */
- bcache_xfree (objfile->psymbol_cache);
- objfile->psymbol_cache = bcache_xmalloc ();
- bcache_xfree (objfile->macro_cache);
- objfile->macro_cache = bcache_xmalloc ();
- bcache_xfree (objfile->filename_cache);
- objfile->filename_cache = bcache_xmalloc ();
+ /* Free the obstacks for non-reusable objfiles. */
+ psymbol_bcache_free (objfile->psymbol_cache);
+ objfile->psymbol_cache = psymbol_bcache_init ();
if (objfile->demangled_names_hash != NULL)
{
htab_delete (objfile->demangled_names_hash);
objfile->psymtabs = NULL;
objfile->psymtabs_addrmap = NULL;
objfile->free_psymtabs = NULL;
- objfile->cp_namespace_symtab = NULL;
+ objfile->template_symbols = NULL;
objfile->msymbols = NULL;
- objfile->deprecated_sym_private = NULL;
objfile->minimal_symbol_count = 0;
memset (&objfile->msymbol_hash, 0,
sizeof (objfile->msymbol_hash));
memset (&objfile->msymbol_demangled_hash, 0,
sizeof (objfile->msymbol_demangled_hash));
- objfile->psymbol_cache = bcache_xmalloc ();
- objfile->macro_cache = bcache_xmalloc ();
- objfile->filename_cache = bcache_xmalloc ();
+ set_objfile_per_bfd (objfile);
+
/* obstack_init also initializes the obstack so it is
empty. We could use obstack_specify_allocation but
- gdb_obstack.h specifies the alloc/dealloc
- functions. */
+ gdb_obstack.h specifies the alloc/dealloc functions. */
obstack_init (&objfile->objfile_obstack);
- if (build_objfile_section_table (objfile))
- {
- error (_("Can't find the file sections in `%s': %s"),
- objfile->name, bfd_errmsg (bfd_get_error ()));
- }
+ build_objfile_section_table (objfile);
terminate_minimal_symbol_table (objfile);
/* We use the same section offsets as from last time. I'm not
(*objfile->sf->sym_init) (objfile);
clear_complaints (&symfile_complaints, 1, 1);
- /* Do not set flags as this is safe and we don't want to be
- verbose. */
- (*objfile->sf->sym_read) (objfile, 0);
+
+ objfile->flags &= ~OBJF_PSYMTABS_READ;
+ read_symbols (objfile, 0);
+
if (!objfile_has_symbols (objfile))
{
wrap_here ("");
and now, we *want* this to be out of date, so don't call stat
again now. */
objfile->mtime = new_modtime;
- reread_one = 1;
init_entry_point_info (objfile);
+
+ VEC_safe_push (objfilep, new_objfiles, objfile);
}
}
- if (reread_one)
+ if (new_objfiles)
{
+ int ix;
+
/* Notify objfiles that we've modified objfile sections. */
objfiles_changed ();
- clear_symtab_users ();
+ clear_symtab_users (0);
+
+ /* clear_objfile_data for each objfile was called before freeing it and
+ observer_notify_new_objfile (NULL) has been called by
+ clear_symtab_users above. Notify the new files now. */
+ for (ix = 0; VEC_iterate (objfilep, new_objfiles, ix, objfile); ix++)
+ observer_notify_new_objfile (objfile);
+
/* At least one objfile has changed, so we can consider that
the executable we're debugging has changed too. */
observer_notify_executable_changed ();
}
+
+ do_cleanups (all_cleanups);
}
\f
-
typedef struct
{
char *ext;
show_ext_args (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-Mapping between filename extension and source language is \"%s\".\n"),
+ fprintf_filtered (file,
+ _("Mapping between filename extension "
+ "and source language is \"%s\".\n"),
value);
}
char *cp = ext_args;
enum language lang;
- /* First arg is filename extension, starting with '.' */
+ /* First arg is filename extension, starting with '.' */
if (*cp != '.')
error (_("'%s': Filename extension must begin with '.'"), ext_args);
cp++;
if (*cp == '\0')
- error (_("'%s': two arguments required -- filename extension and language"),
+ error (_("'%s': two arguments required -- "
+ "filename extension and language"),
ext_args);
- /* Null-terminate first arg */
+ /* Null-terminate first arg. */
*cp++ = '\0';
/* Find beginning of second arg, which should be a source language. */
- while (*cp && isspace (*cp))
- cp++;
+ cp = skip_spaces (cp);
if (*cp == '\0')
- error (_("'%s': two arguments required -- filename extension and language"),
+ error (_("'%s': two arguments required -- "
+ "filename extension and language"),
ext_args);
/* Lookup the language from among those we know. */
if (i >= fl_table_next)
{
- /* new file extension */
+ /* New file extension. */
add_filename_language (ext_args, lang);
}
else
{
- /* redefining a previously known filename extension */
+ /* Redefining a previously known filename extension. */
/* if (from_tty) */
/* query ("Really make files of type %s '%s'?", */
static void
init_filename_language_table (void)
{
- if (fl_table_size == 0) /* protect against repetition */
+ if (fl_table_size == 0) /* Protect against repetition. */
{
fl_table_size = 20;
fl_table_next = 0;
}
enum language
-deduce_language_from_filename (char *filename)
+deduce_language_from_filename (const char *filename)
{
int i;
char *cp;
*/
struct symtab *
-allocate_symtab (char *filename, struct objfile *objfile)
+allocate_symtab (const char *filename, struct objfile *objfile)
{
struct symtab *symtab;
obstack_alloc (&objfile->objfile_obstack, sizeof (struct symtab));
memset (symtab, 0, sizeof (*symtab));
symtab->filename = (char *) bcache (filename, strlen (filename) + 1,
- objfile->filename_cache);
+ objfile->per_bfd->filename_cache);
symtab->fullname = NULL;
symtab->language = deduce_language_from_filename (filename);
symtab->debugformat = "unknown";
- /* Hook it to the objfile it comes from */
+ /* Hook it to the objfile it comes from. */
symtab->objfile = objfile;
symtab->next = objfile->symtabs;
objfile->symtabs = symtab;
+ if (symtab_create_debug)
+ {
+ /* Be a bit clever with debugging messages, and don't print objfile
+ every time, only when it changes. */
+ static char *last_objfile_name = NULL;
+
+ if (last_objfile_name == NULL
+ || strcmp (last_objfile_name, objfile->name) != 0)
+ {
+ xfree (last_objfile_name);
+ last_objfile_name = xstrdup (objfile->name);
+ fprintf_unfiltered (gdb_stdlog,
+ "Creating one or more symtabs for objfile %s ...\n",
+ last_objfile_name);
+ }
+ fprintf_unfiltered (gdb_stdlog,
+ "Created symtab %s for module %s.\n",
+ host_address_to_string (symtab), filename);
+ }
+
return (symtab);
}
\f
/* Reset all data structures in gdb which may contain references to symbol
- table data. */
+ table data. ADD_FLAGS is a bitmask of enum symfile_add_flags. */
void
-clear_symtab_users (void)
+clear_symtab_users (int add_flags)
{
/* Someday, we should do better than this, by only blowing away
the things that really need to be blown. */
clear_current_source_symtab_and_line ();
clear_displays ();
- breakpoint_re_set ();
- set_default_breakpoint (0, NULL, 0, 0, 0);
+ if ((add_flags & SYMFILE_DEFER_BP_RESET) == 0)
+ breakpoint_re_set ();
+ clear_last_displayed_sal ();
clear_pc_function_cache ();
observer_notify_new_objfile (NULL);
static void
clear_symtab_users_cleanup (void *ignore)
{
- clear_symtab_users ();
+ clear_symtab_users (0);
}
\f
/* OVERLAYS:
overlay_unmapped_address(...): map an address from section's VMA to LMA
symbol_overlayed_address(...): Return a "current" address for symbol:
either in VMA or LMA depending on whether
- the symbol's section is currently mapped
- */
+ the symbol's section is currently mapped. */
/* Overlay debugging state: */
enum overlay_debugging_state overlay_debugging = ovly_off;
-int overlay_cache_invalid = 0; /* True if need to refresh mapped state */
+int overlay_cache_invalid = 0; /* True if need to refresh mapped state. */
/* Function: section_is_overlay (SECTION)
Returns true if SECTION has VMA not equal to LMA, ie.
{
bfd *abfd = section->objfile->obfd;
asection *bfd_section = section->the_bfd_section;
-
+
if (bfd_section_lma (abfd, bfd_section) != 0
&& bfd_section_lma (abfd, bfd_section)
!= bfd_section_vma (abfd, bfd_section))
return 0; /* overlay debugging off */
case ovly_auto: /* overlay debugging automatic */
/* Unles there is a gdbarch_overlay_update function,
- there's really nothing useful to do here (can't really go auto) */
+ there's really nothing useful to do here (can't really go auto). */
gdbarch = get_objfile_arch (osect->objfile);
if (gdbarch_overlay_update_p (gdbarch))
{
return 0;
}
-
/* Return true if the mapped ranges of sections A and B overlap, false
otherwise. */
+
static int
sections_overlap (struct obj_section *a, struct obj_section *b)
{
return pc;
}
-
/* Function: symbol_overlayed_address
Return one of two addresses (relative to the VMA or to the LMA),
depending on whether the section is mapped or not. */
{
if (overlay_debugging)
{
- /* If the symbol has no section, just return its regular address. */
+ /* If the symbol has no section, just return its regular address. */
if (section == 0)
return address;
- /* If the symbol's section is not an overlay, just return its address */
+ /* If the symbol's section is not an overlay, just return its
+ address. */
if (!section_is_overlay (section))
return address;
- /* If the symbol's section is mapped, just return its address */
+ /* If the symbol's section is mapped, just return its address. */
if (section_is_mapped (section))
return address;
/*
}
/* Function: list_overlays_command
- Print a list of mapped sections and their PC ranges */
+ Print a list of mapped sections and their PC ranges. */
-void
+static void
list_overlays_command (char *args, int from_tty)
{
int nmapped = 0;
/* Function: map_overlay_command
Mark the named section as mapped (ie. residing at its VMA address). */
-void
+static void
map_overlay_command (char *args, int from_tty)
{
struct objfile *objfile, *objfile2;
struct obj_section *sec, *sec2;
if (!overlay_debugging)
- error (_("\
-Overlay debugging not enabled. Use either the 'overlay auto' or\n\
-the 'overlay manual' command."));
+ error (_("Overlay debugging not enabled. Use "
+ "either the 'overlay auto' or\n"
+ "the 'overlay manual' command."));
if (args == 0 || *args == 0)
error (_("Argument required: name of an overlay section"));
- /* First, find a section matching the user supplied argument */
+ /* First, find a section matching the user supplied argument. */
ALL_OBJSECTIONS (objfile, sec)
if (!strcmp (bfd_section_name (objfile->obfd, sec->the_bfd_section), args))
{
- /* Now, check to see if the section is an overlay. */
+ /* Now, check to see if the section is an overlay. */
if (!section_is_overlay (sec))
continue; /* not an overlay section */
- /* Mark the overlay as "mapped" */
+ /* Mark the overlay as "mapped". */
sec->ovly_mapped = 1;
/* Next, make a pass and unmap any sections that are
printf_unfiltered (_("Note: section %s unmapped by overlap\n"),
bfd_section_name (objfile->obfd,
sec2->the_bfd_section));
- sec2->ovly_mapped = 0; /* sec2 overlaps sec: unmap sec2 */
+ sec2->ovly_mapped = 0; /* sec2 overlaps sec: unmap sec2. */
}
return;
}
Mark the overlay section as unmapped
(ie. resident in its LMA address range, rather than the VMA range). */
-void
+static void
unmap_overlay_command (char *args, int from_tty)
{
struct objfile *objfile;
struct obj_section *sec;
if (!overlay_debugging)
- error (_("\
-Overlay debugging not enabled. Use either the 'overlay auto' or\n\
-the 'overlay manual' command."));
+ error (_("Overlay debugging not enabled. "
+ "Use either the 'overlay auto' or\n"
+ "the 'overlay manual' command."));
if (args == 0 || *args == 0)
error (_("Argument required: name of an overlay section"));
- /* First, find a section matching the user supplied argument */
+ /* First, find a section matching the user supplied argument. */
ALL_OBJSECTIONS (objfile, sec)
if (!strcmp (bfd_section_name (objfile->obfd, sec->the_bfd_section), args))
{
/* Function: overlay_auto_command
A utility command to turn on overlay debugging.
- Possibly this should be done via a set/show command. */
+ Possibly this should be done via a set/show command. */
static void
overlay_auto_command (char *args, int from_tty)
/* Function: overlay_manual_command
A utility command to turn on overlay debugging.
- Possibly this should be done via a set/show command. */
+ Possibly this should be done via a set/show command. */
static void
overlay_manual_command (char *args, int from_tty)
/* Function: overlay_off_command
A utility command to turn on overlay debugging.
- Possibly this should be done via a set/show command. */
+ Possibly this should be done via a set/show command. */
static void
overlay_off_command (char *args, int from_tty)
}
/* Function: overlay_command
- A place-holder for a mis-typed command */
+ A place-holder for a mis-typed command. */
-/* Command list chain containing all defined "overlay" subcommands. */
-struct cmd_list_element *overlaylist;
+/* Command list chain containing all defined "overlay" subcommands. */
+static struct cmd_list_element *overlaylist;
static void
overlay_command (char *args, int from_tty)
help_list (overlaylist, "overlay ", -1, gdb_stdout);
}
-
/* Target Overlays for the "Simplest" overlay manager:
This is GDB's default target overlay layer. It works with the
attempt to detect when the cached copy is invalidated. The main
entry point is "simple_overlay_update(SECT), which looks up SECT in
the cached table and re-reads only the entry for that section from
- the target (whenever possible).
- */
+ the target (whenever possible). */
/* Cached, dynamically allocated copies of the target data structures: */
static unsigned (*cache_ovly_table)[4] = 0;
-#if 0
-static unsigned (*cache_ovly_region_table)[3] = 0;
-#endif
static unsigned cache_novlys = 0;
-#if 0
-static unsigned cache_novly_regions = 0;
-#endif
static CORE_ADDR cache_ovly_table_base = 0;
-#if 0
-static CORE_ADDR cache_ovly_region_table_base = 0;
-#endif
enum ovly_index
{
VMA, SIZE, LMA, MAPPED
};
-/* Throw away the cached copy of _ovly_table */
+/* Throw away the cached copy of _ovly_table. */
+
static void
simple_free_overlay_table (void)
{
cache_ovly_table_base = 0;
}
-#if 0
-/* Throw away the cached copy of _ovly_region_table */
-static void
-simple_free_overlay_region_table (void)
-{
- if (cache_ovly_region_table)
- xfree (cache_ovly_region_table);
- cache_novly_regions = 0;
- cache_ovly_region_table = NULL;
- cache_ovly_region_table_base = 0;
-}
-#endif
-
/* Read an array of ints of size SIZE from the target into a local buffer.
- Convert to host order. int LEN is number of ints */
+ Convert to host order. int LEN is number of ints. */
+
static void
read_target_long_array (CORE_ADDR memaddr, unsigned int *myaddr,
int len, int size, enum bfd_endian byte_order)
{
- /* FIXME (alloca): Not safe if array is very large. */
+ /* FIXME (alloca): Not safe if array is very large. */
gdb_byte *buf = alloca (len * size);
int i;
}
/* Find and grab a copy of the target _ovly_table
- (and _novlys, which is needed for the table's size) */
+ (and _novlys, which is needed for the table's size). */
+
static int
simple_read_overlay_table (void)
{
return 1; /* SUCCESS */
}
-#if 0
-/* Find and grab a copy of the target _ovly_region_table
- (and _novly_regions, which is needed for the table's size) */
-static int
-simple_read_overlay_region_table (void)
-{
- struct minimal_symbol *msym;
- struct gdbarch *gdbarch;
- int word_size;
- enum bfd_endian byte_order;
-
- simple_free_overlay_region_table ();
- msym = lookup_minimal_symbol ("_novly_regions", NULL, NULL);
- if (msym == NULL)
- return 0; /* failure */
-
- gdbarch = get_objfile_arch (msymbol_objfile (msym));
- word_size = gdbarch_long_bit (gdbarch) / TARGET_CHAR_BIT;
- byte_order = gdbarch_byte_order (gdbarch);
-
- cache_novly_regions = read_memory_integer (SYMBOL_VALUE_ADDRESS (msym),
- 4, byte_order);
-
- cache_ovly_region_table = (void *) xmalloc (cache_novly_regions * 12);
- if (cache_ovly_region_table != NULL)
- {
- msym = lookup_minimal_symbol ("_ovly_region_table", NULL, NULL);
- if (msym != NULL)
- {
- cache_ovly_region_table_base = SYMBOL_VALUE_ADDRESS (msym);
- read_target_long_array (cache_ovly_region_table_base,
- (unsigned int *) cache_ovly_region_table,
- cache_novly_regions * 3,
- word_size, byte_order);
- }
- else
- return 0; /* failure */
- }
- else
- return 0; /* failure */
- return 1; /* SUCCESS */
-}
-#endif
-
/* Function: simple_overlay_update_1
A helper function for simple_overlay_update. Assuming a cached copy
of _ovly_table exists, look through it to find an entry whose vma,
osect->ovly_mapped = cache_ovly_table[i][MAPPED];
return 1;
}
- else /* Warning! Warning! Target's ovly table has changed! */
+ else /* Warning! Warning! Target's ovly table has changed! */
return 0;
}
return 0;
{
struct objfile *objfile;
- /* Were we given an osect to look up? NULL means do all of them. */
+ /* Were we given an osect to look up? NULL means do all of them. */
if (osect)
- /* Have we got a cached copy of the target's overlay table? */
+ /* Have we got a cached copy of the target's overlay table? */
if (cache_ovly_table != NULL)
- /* Does its cached location match what's currently in the symtab? */
- if (cache_ovly_table_base ==
- SYMBOL_VALUE_ADDRESS (lookup_minimal_symbol ("_ovly_table", NULL, NULL)))
- /* Then go ahead and try to look up this single section in the cache */
- if (simple_overlay_update_1 (osect))
- /* Found it! We're done. */
- return;
+ {
+ /* Does its cached location match what's currently in the
+ symtab? */
+ struct minimal_symbol *minsym
+ = lookup_minimal_symbol ("_ovly_table", NULL, NULL);
+
+ if (minsym == NULL)
+ error (_("Error reading inferior's overlay table: couldn't "
+ "find `_ovly_table' array\n"
+ "in inferior. Use `overlay manual' mode."));
+
+ if (cache_ovly_table_base == SYMBOL_VALUE_ADDRESS (minsym))
+ /* Then go ahead and try to look up this single section in
+ the cache. */
+ if (simple_overlay_update_1 (osect))
+ /* Found it! We're done. */
+ return;
+ }
/* Cached table no good: need to read the entire table anew.
Or else we want all the sections, in which case it's actually
if (! simple_read_overlay_table ())
return;
- /* Now may as well update all sections, even if only one was requested. */
+ /* Now may as well update all sections, even if only one was requested. */
ALL_OBJSECTIONS (objfile, osect)
if (section_is_overlay (osect))
{
if (cache_ovly_table[i][VMA] == bfd_section_vma (obfd, bsect)
&& cache_ovly_table[i][LMA] == bfd_section_lma (obfd, bsect)
/* && cache_ovly_table[i][SIZE] == size */ )
- { /* obj_section matches i'th entry in ovly_table */
+ { /* obj_section matches i'th entry in ovly_table. */
osect->ovly_mapped = cache_ovly_table[i][MAPPED];
- break; /* finished with inner for loop: break out */
+ break; /* finished with inner for loop: break out. */
}
}
}
/* Default implementation for sym_relocate. */
-
bfd_byte *
default_symfile_relocate (struct objfile *objfile, asection *sectp,
bfd_byte *buf)
{
- bfd *abfd = objfile->obfd;
+ /* Use sectp->owner instead of objfile->obfd. sectp may point to a
+ DWO file. */
+ bfd *abfd = sectp->owner;
/* We're only interested in sections with relocation
information. */
struct symfile_segment_data *
get_symfile_segment_data (bfd *abfd)
{
- struct sym_fns *sf = find_sym_fns (abfd);
+ const struct sym_fns *sf = find_sym_fns (abfd);
if (sf == NULL)
return NULL;
xfree (data);
}
-
/* Given:
- DATA, containing segment addresses from the object file ABFD, and
the mapping from ABFD's sections onto the segments that own them,
If there are more entries, then ignore the extra. The target may
not be able to distinguish between an empty data segment and a
missing data segment; a missing text segment is less plausible. */
+
int
-symfile_map_offsets_to_segments (bfd *abfd, struct symfile_segment_data *data,
+symfile_map_offsets_to_segments (bfd *abfd,
+ const struct symfile_segment_data *data,
struct section_offsets *offsets,
int num_segment_bases,
const CORE_ADDR *segment_bases)
c = add_cmd ("add-symbol-file", class_files, add_symbol_file_command, _("\
Load symbols from FILE, assuming FILE has been dynamically loaded.\n\
-Usage: add-symbol-file FILE ADDR [-s <SECT> <SECT_ADDR> -s <SECT> <SECT_ADDR> ...]\n\
-ADDR is the starting address of the file's text.\n\
+Usage: add-symbol-file FILE ADDR [-s <SECT> <SECT_ADDR> -s <SECT> <SECT_ADDR>\
+ ...]\nADDR is the starting address of the file's text.\n\
The optional arguments are section-name section-address pairs and\n\
should be specified if the data and bss segments are not contiguous\n\
with the text. SECT is a section name to be loaded at SECT_ADDR."),
A load OFFSET may also be given."), &cmdlist);
set_cmd_completer (c, filename_completer);
- add_setshow_boolean_cmd ("symbol-reloading", class_support,
- &symbol_reloading, _("\
-Set dynamic symbol table reloading multiple times in one run."), _("\
-Show dynamic symbol table reloading multiple times in one run."), NULL,
- NULL,
- show_symbol_reloading,
- &setlist, &showlist);
-
add_prefix_cmd ("overlay", class_support, overlay_command,
_("Commands for debugging overlays."), &overlaylist,
"overlay ", 0, &cmdlist);