Boston, MA 02111-1307, USA. */
#include "defs.h"
+#include "bfdlink.h"
#include "symtab.h"
#include "gdbtypes.h"
#include "gdbcore.h"
#include "gdb_obstack.h"
#include "completer.h"
#include "bcache.h"
+#include "hashtab.h"
#include <readline/readline.h>
#include "gdb_assert.h"
+#include "block.h"
#include <sys/types.h>
#include <fcntl.h>
s1 = (struct symbol **) s1p;
s2 = (struct symbol **) s2p;
- return (strcmp (SYMBOL_SOURCE_NAME (*s1), SYMBOL_SOURCE_NAME (*s2)));
+ return (strcmp (SYMBOL_NATURAL_NAME (*s1), SYMBOL_NATURAL_NAME (*s2)));
}
-/*
-
- LOCAL FUNCTION
-
- compare_psymbols -- compare two partial symbols by name
-
- DESCRIPTION
-
- Given pointers to pointers to two partial symbol table entries,
- compare them by name and return -N, 0, or +N (ala strcmp).
- Typically used by sorting routines like qsort().
-
- NOTES
-
- Does direct compare of first two characters before punting
- and passing to strcmp for longer compares. Note that the
- original version had a bug whereby two null strings or two
- identically named one character strings would return the
- comparison of memory following the null byte.
-
- */
+/* This compares two partial symbols by names, using strcmp_iw_ordered
+ for the comparison. */
static int
compare_psymbols (const void *s1p, const void *s2p)
{
- register struct partial_symbol **s1, **s2;
- register char *st1, *st2;
+ struct partial_symbol *const *s1 = s1p;
+ struct partial_symbol *const *s2 = s2p;
- s1 = (struct partial_symbol **) s1p;
- s2 = (struct partial_symbol **) s2p;
- st1 = SYMBOL_SOURCE_NAME (*s1);
- st2 = SYMBOL_SOURCE_NAME (*s2);
-
-
- if ((st1[0] - st2[0]) || !st1[0])
- {
- return (st1[0] - st2[0]);
- }
- else if ((st1[1] - st2[1]) || !st1[1])
- {
- return (st1[1] - st2[1]);
- }
- else
- {
- return (strcmp (st1, st2));
- }
+ return strcmp_iw_ordered (SYMBOL_NATURAL_NAME (*s1),
+ SYMBOL_NATURAL_NAME (*s2));
}
void
compare_psymbols);
}
-/* Call sort_block_syms to sort alphabetically the symbols of one block. */
-
-void
-sort_block_syms (register struct block *b)
-{
- qsort (&BLOCK_SYM (b, 0), BLOCK_NSYMS (b),
- sizeof (struct symbol *), compare_symbols);
-}
-
-/* Call sort_symtab_syms to sort alphabetically
- the symbols of each block of one symtab. */
-
-void
-sort_symtab_syms (register struct symtab *s)
-{
- register struct blockvector *bv;
- int nbl;
- int i;
- register struct block *b;
-
- if (s == 0)
- return;
- bv = BLOCKVECTOR (s);
- nbl = BLOCKVECTOR_NBLOCKS (bv);
- for (i = 0; i < nbl; i++)
- {
- b = BLOCKVECTOR_BLOCK (bv, i);
- if (BLOCK_SHOULD_SORT (b))
- sort_block_syms (b);
- }
-}
-
/* Make a null terminated copy of the string at PTR with SIZE characters in
the obstack pointed to by OBSTACKP . Returns the address of the copy.
Note that the string at PTR does not have to be null terminated, I.E. it
/* Examination of non-executable.o files. Short-circuit this stuff. */
objfile->ei.entry_point = INVALID_ENTRY_POINT;
}
- objfile->ei.entry_file_lowpc = INVALID_ENTRY_LOWPC;
- objfile->ei.entry_file_highpc = INVALID_ENTRY_HIGHPC;
+ objfile->ei.deprecated_entry_file_lowpc = INVALID_ENTRY_LOWPC;
+ objfile->ei.deprecated_entry_file_highpc = INVALID_ENTRY_HIGHPC;
objfile->ei.entry_func_lowpc = INVALID_ENTRY_LOWPC;
objfile->ei.entry_func_highpc = INVALID_ENTRY_HIGHPC;
objfile->ei.main_func_lowpc = INVALID_ENTRY_LOWPC;
*lowest = sect;
}
+/* Create a new section_addr_info, with room for NUM_SECTIONS. */
+
+struct section_addr_info *
+alloc_section_addr_info (size_t num_sections)
+{
+ struct section_addr_info *sap;
+ size_t size;
+
+ size = (sizeof (struct section_addr_info)
+ + sizeof (struct other_sections) * (num_sections - 1));
+ sap = (struct section_addr_info *) xmalloc (size);
+ memset (sap, 0, size);
+ sap->num_sections = num_sections;
+
+ return sap;
+}
/* Build (allocate and populate) a section_addr_info struct from
an existing section table. */
const struct section_table *stp;
int oidx;
- sap = xmalloc (sizeof (struct section_addr_info));
- memset (sap, 0, sizeof (struct section_addr_info));
+ sap = alloc_section_addr_info (end - start);
for (stp = start, oidx = 0; stp != end; stp++)
{
if (bfd_get_section_flags (stp->bfd,
stp->the_bfd_section) & (SEC_ALLOC | SEC_LOAD)
- && oidx < MAX_SECTIONS)
+ && oidx < end - start)
{
sap->other[oidx].addr = stp->addr;
sap->other[oidx].name
{
int idx;
- for (idx = 0; idx < MAX_SECTIONS; idx++)
+ for (idx = 0; idx < sap->num_sections; idx++)
if (sap->other[idx].name)
xfree (sap->other[idx].name);
xfree (sap);
{
int i;
- objfile->num_sections = SECT_OFF_MAX;
+ objfile->num_sections = bfd_count_sections (objfile->obfd);
objfile->section_offsets = (struct section_offsets *)
- obstack_alloc (&objfile->psymbol_obstack, SIZEOF_SECTION_OFFSETS);
- memset (objfile->section_offsets, 0, SIZEOF_SECTION_OFFSETS);
+ obstack_alloc (&objfile->psymbol_obstack,
+ SIZEOF_N_SECTION_OFFSETS (objfile->num_sections));
+ memset (objfile->section_offsets, 0,
+ SIZEOF_N_SECTION_OFFSETS (objfile->num_sections));
/* Now calculate offsets for section that were specified by the
caller. */
- for (i = 0; i < MAX_SECTIONS && addrs->other[i].name; i++)
+ for (i = 0; i < addrs->num_sections && addrs->other[i].name; i++)
{
struct other_sections *osp ;
int mainline,
int verbo)
{
- asection *lower_sect;
- asection *sect;
- CORE_ADDR lower_offset;
- struct section_addr_info local_addr;
+ struct section_addr_info *local_addr = NULL;
struct cleanup *old_chain;
- int i;
gdb_assert (! (addrs && offsets));
- /* If ADDRS and OFFSETS are both NULL, put together a dummy address
- list. We now establish the convention that an addr of zero means
- no load address was specified. */
- if (! addrs && ! offsets)
- {
- memset (&local_addr, 0, sizeof (local_addr));
- addrs = &local_addr;
- }
-
- /* Now either addrs or offsets is non-zero. */
-
init_entry_point_info (objfile);
find_sym_fns (objfile);
if an error occurs during symbol reading. */
old_chain = make_cleanup_free_objfile (objfile);
+ /* If ADDRS and OFFSETS are both NULL, put together a dummy address
+ list. We now establish the convention that an addr of zero means
+ no load address was specified. */
+ if (! addrs && ! offsets)
+ {
+ local_addr
+ = alloc_section_addr_info (bfd_count_sections (objfile->obfd));
+ make_cleanup (xfree, local_addr);
+ addrs = local_addr;
+ }
+
+ /* Now either addrs or offsets is non-zero. */
+
if (mainline)
{
/* We will modify the main symbol table, make sure that all its users
We no longer warn if the lowest section is not a text segment (as
happens for the PA64 port. */
- if (!mainline)
+ if (!mainline && addrs && addrs->other[0].name)
{
+ asection *lower_sect;
+ asection *sect;
+ CORE_ADDR lower_offset;
+ int i;
+
/* Find lowest loadable section to be used as starting point for
continguous sections. FIXME!! won't work without call to find
.text first, but this assumes text is lowest section. */
(the loadable section directly below it in memory).
this_offset = lower_offset = lower_addr - lower_orig_addr */
- /* Calculate offsets for sections. */
- if (addrs)
- for (i=0 ; i < MAX_SECTIONS && addrs->other[i].name; i++)
+ for (i = 0; i < addrs->num_sections && addrs->other[i].name; i++)
{
if (addrs->other[i].addr != 0)
{
init_objfile_sect_indices (objfile);
}
-#ifndef IBM6000_TARGET
+#ifndef DEPRECATED_IBM6000_TARGET
/* This is a SVR4/SunOS specific hack, I think. In any event, it
screws RS/6000. sym_offsets should be doing this sort of thing,
because it knows the mapping between bfd sections and
int i;
for (i = 0;
- !s_addr && i < MAX_SECTIONS && addrs->other[i].name;
+ !s_addr && i < addrs->num_sections && addrs->other[i].name;
i++)
if (strcmp (bfd_section_name (s->objfile->obfd,
s->the_bfd_section),
s->offset += s_addr;
}
}
-#endif /* not IBM6000_TARGET */
+#endif /* not DEPRECATED_IBM6000_TARGET */
(*objfile->sf->sym_read) (objfile, mainline);
- if (!have_partial_symbols () && !have_full_symbols ())
- {
- wrap_here ("");
- printf_filtered ("(no debugging symbols found)...");
- wrap_here ("");
- }
-
/* Don't allow char * to have a typename (else would get caddr_t).
Ditto void *. FIXME: Check whether this is now done by all the
symbol readers themselves (many of them now do), and if so remove
/* Discard cleanups as symbol reading was successful. */
discard_cleanups (old_chain);
-
- /* Call this after reading in a new symbol table to give target
- dependent code a crack at the new symbols. For instance, this
- could be used to update the values of target-specific symbols GDB
- needs to keep track of (such as _sigtramp, or whatever). */
-
- TARGET_SYMFILE_POSTREAD (objfile);
}
/* Perform required actions after either reading in the initial
struct partial_symtab *psymtab;
char *debugfile;
bfd *abfd;
- struct section_addr_info orig_addrs;
-
- if (addrs)
- orig_addrs = *addrs;
+ struct section_addr_info *orig_addrs;
+ struct cleanup *my_cleanups;
/* Open a bfd for the file, and give user a chance to burp if we'd be
interactively wiping out any existing symbols. */
objfile = allocate_objfile (abfd, flags);
+ orig_addrs = alloc_section_addr_info (bfd_count_sections (abfd));
+ my_cleanups = make_cleanup (xfree, orig_addrs);
+ if (addrs)
+ {
+ int i;
+ orig_addrs->num_sections = addrs->num_sections;
+ for (i = 0; i < addrs->num_sections; i++)
+ orig_addrs->other[i] = addrs->other[i];
+ }
+
/* If the objfile uses a mapped symbol file, and we have a psymtab for
it, then skip reading any symbols at this time. */
debugfile = find_separate_debug_file (objfile);
if (debugfile)
{
- if (from_tty || info_verbose)
- {
- printf_filtered ("loading separate debug info from '%s'",
- debugfile);
- wrap_here ("");
- gdb_flush (gdb_stdout);
- }
-
if (addrs != NULL)
{
objfile->separate_debug_objfile
- = symbol_file_add (debugfile, from_tty, &orig_addrs, 0, flags);
+ = symbol_file_add (debugfile, from_tty, orig_addrs, 0, flags);
}
else
{
xfree (debugfile);
}
+ if (!have_partial_symbols () && !have_full_symbols ())
+ {
+ wrap_here ("");
+ printf_filtered ("(no debugging symbols found)...");
+ wrap_here ("");
+ }
+
if (from_tty || info_verbose)
{
if (post_add_symbol_hook)
time. */
gdb_flush (gdb_stdout);
+ do_cleanups (my_cleanups);
+
if (objfile->sf == NULL)
return objfile; /* No symbols. */
dir = xstrdup (objfile->name);
- /* Strip off filename part */
+ /* Strip off the final filename part, leaving the directory name,
+ followed by a slash. Objfile names should always be absolute and
+ tilde-expanded, so there should always be a slash in there
+ somewhere. */
for (i = strlen(dir) - 1; i >= 0; i--)
{
if (IS_DIR_SEPARATOR (dir[i]))
break;
}
+ gdb_assert (i >= 0 && IS_DIR_SEPARATOR (dir[i]));
dir[i+1] = '\0';
debugfile = alloca (strlen (debug_file_directory) + 1
strcpy (debugfile, debug_file_directory);
strcat (debugfile, "/");
strcat (debugfile, dir);
- strcat (debugfile, "/");
strcat (debugfile, basename);
if (separate_debug_file_exists (debugfile, crc32))
|| our_flavour == bfd_target_tekhex_flavour)
return; /* No symbols. */
- /* Special kludge for apollo. See dstread.c. */
- if (STREQN (our_target, "apollo", 6))
- our_flavour = (enum bfd_flavour) -2;
-
for (sf = symtab_fns; sf != NULL; sf = sf->next)
{
if (our_flavour == sf->sym_flavour)
for other targets too. */
write_pc (entry);
- /* FIXME: are we supposed to call symbol_file_add or not? According to
- a comment from remote-mips.c (where a call to symbol_file_add was
- commented out), making the call confuses GDB if more than one file is
- loaded in. remote-nindy.c had no call to symbol_file_add, but remote-vx.c
- does. */
+ /* FIXME: are we supposed to call symbol_file_add or not? According
+ to a comment from remote-mips.c (where a call to symbol_file_add
+ was commented out), making the call confuses GDB if more than one
+ file is loaded in. Some targets do (e.g., remote-vx.c) but
+ others don't (or didn't - perhaphs they have all been deleted). */
print_transfer_performance (gdb_stdout, cbdata.data_count,
cbdata.write_count, end_time - start_time);
int expecting_sec_name = 0;
int expecting_sec_addr = 0;
- struct
+ struct sect_opt
{
char *name;
char *value;
- } sect_opts[SECT_OFF_MAX];
+ };
- struct section_addr_info section_addrs;
+ struct section_addr_info *section_addrs;
+ struct sect_opt *sect_opts = NULL;
+ size_t num_sect_opts = 0;
struct cleanup *my_cleanups = make_cleanup (null_cleanup, NULL);
+ num_sect_opts = 16;
+ sect_opts = (struct sect_opt *) xmalloc (num_sect_opts
+ * sizeof (struct sect_opt));
+
dont_repeat ();
if (args == NULL)
/* Make a copy of the string that we can safely write into. */
args = xstrdup (args);
- /* Ensure section_addrs is initialized */
- memset (§ion_addrs, 0, sizeof (section_addrs));
-
while (*args != '\000')
{
/* Any leading spaces? */
to load the program. */
sect_opts[section_index].name = ".text";
sect_opts[section_index].value = arg;
- section_index++;
+ if (++section_index > num_sect_opts)
+ {
+ num_sect_opts *= 2;
+ sect_opts = ((struct sect_opt *)
+ xrealloc (sect_opts,
+ num_sect_opts
+ * sizeof (struct sect_opt)));
+ }
}
else
{
else
if (strcmp (arg, "-s") == 0)
{
- if (section_index >= SECT_OFF_MAX)
- error ("Too many sections specified.");
expecting_sec_name = 1;
expecting_sec_addr = 1;
}
{
sect_opts[section_index].value = arg;
expecting_sec_addr = 0;
- section_index++;
+ if (++section_index > num_sect_opts)
+ {
+ num_sect_opts *= 2;
+ sect_opts = ((struct sect_opt *)
+ xrealloc (sect_opts,
+ num_sect_opts
+ * sizeof (struct sect_opt)));
+ }
}
else
error ("USAGE: add-symbol-file <filename> <textaddress> [-mapped] [-readnow] [-s <secname> <addr>]*");
string. */
printf_filtered ("add symbol table from file \"%s\" at\n", filename);
+ section_addrs = alloc_section_addr_info (section_index);
+ make_cleanup (xfree, section_addrs);
for (i = 0; i < section_index; i++)
{
CORE_ADDR addr;
char *val = sect_opts[i].value;
char *sec = sect_opts[i].name;
- val = sect_opts[i].value;
- if (val[0] == '0' && val[1] == 'x')
- addr = strtoul (val+2, NULL, 16);
- else
- addr = strtoul (val, NULL, 10);
+ addr = parse_and_eval_address (val);
/* Here we store the section offsets in the order they were
entered on the command line. */
- section_addrs.other[sec_num].name = sec;
- section_addrs.other[sec_num].addr = addr;
+ section_addrs->other[sec_num].name = sec;
+ section_addrs->other[sec_num].addr = addr;
printf_filtered ("\t%s_addr = %s\n",
sec,
local_hex_string ((unsigned long)addr));
if (from_tty && (!query ("%s", "")))
error ("Not confirmed.");
- symbol_file_add (filename, from_tty, §ion_addrs, 0, flags);
+ symbol_file_add (filename, from_tty, section_addrs, 0, flags);
/* Getting new symbols may change our opinion about what is
frameless. */
{
if (objfile->obfd)
{
-#ifdef IBM6000_TARGET
+#ifdef DEPRECATED_IBM6000_TARGET
/* If this object is from a shared library, then you should
stat on the library name, not member name. */
/* Save the offsets, we will nuke them with the rest of the
psymbol_obstack. */
num_offsets = objfile->num_sections;
- offsets = (struct section_offsets *) alloca (SIZEOF_SECTION_OFFSETS);
- memcpy (offsets, objfile->section_offsets, SIZEOF_SECTION_OFFSETS);
+ offsets = ((struct section_offsets *)
+ alloca (SIZEOF_N_SECTION_OFFSETS (num_offsets)));
+ memcpy (offsets, objfile->section_offsets,
+ SIZEOF_N_SECTION_OFFSETS (num_offsets));
/* Nuke all the state that we will re-read. Much of the following
code which sets things to NULL really is necessary to tell
objfile->psymbol_cache = bcache_xmalloc ();
bcache_xfree (objfile->macro_cache);
objfile->macro_cache = bcache_xmalloc ();
+ if (objfile->demangled_names_hash != NULL)
+ {
+ htab_delete (objfile->demangled_names_hash);
+ objfile->demangled_names_hash = NULL;
+ }
obstack_free (&objfile->psymbol_obstack, 0);
obstack_free (&objfile->symbol_obstack, 0);
obstack_free (&objfile->type_obstack, 0);
objfile->psymtabs = NULL;
objfile->free_psymtabs = NULL;
objfile->msymbols = NULL;
+ objfile->sym_private = NULL;
objfile->minimal_symbol_count = 0;
memset (&objfile->msymbol_hash, 0,
sizeof (objfile->msymbol_hash));
error ("Can't find the file sections in `%s': %s",
objfile->name, bfd_errmsg (bfd_get_error ()));
}
+ terminate_minimal_symbol_table (objfile);
/* We use the same section offsets as from last time. I'm not
sure whether that is always correct for shared libraries. */
objfile->section_offsets = (struct section_offsets *)
- obstack_alloc (&objfile->psymbol_obstack, SIZEOF_SECTION_OFFSETS);
- memcpy (objfile->section_offsets, offsets, SIZEOF_SECTION_OFFSETS);
+ obstack_alloc (&objfile->psymbol_obstack,
+ SIZEOF_N_SECTION_OFFSETS (num_offsets));
+ memcpy (objfile->section_offsets, offsets,
+ SIZEOF_N_SECTION_OFFSETS (num_offsets));
objfile->num_sections = num_offsets;
/* What the hell is sym_new_init for, anyway? The concept of
again now. */
objfile->mtime = new_modtime;
reread_one = 1;
-
- /* Call this after reading in a new symbol table to give target
- dependent code a crack at the new symbols. For instance, this
- could be used to update the values of target-specific symbols GDB
- needs to keep track of (such as _sigtramp, or whatever). */
-
- TARGET_SYMFILE_POSTREAD (objfile);
-
reread_separate_symbols (objfile);
}
}
}
\f
/* Add a symbol with a long value to a psymtab.
- Since one arg is a struct, we pass in a ptr and deref it (sigh). */
-
-void
-add_psymbol_to_list (char *name, int namelength, namespace_enum namespace,
+ Since one arg is a struct, we pass in a ptr and deref it (sigh).
+ Return the partial symbol that has been added. */
+
+/* NOTE: carlton/2003-09-11: The reason why we return the partial
+ symbol is so that callers can get access to the symbol's demangled
+ name, which they don't have any cheap way to determine otherwise.
+ (Currenly, dwarf2read.c is the only file who uses that information,
+ though it's possible that other readers might in the future.)
+ Elena wasn't thrilled about that, and I don't blame her, but we
+ couldn't come up with a better way to get that information. If
+ it's needed in other situations, we could consider breaking up
+ SYMBOL_SET_NAMES to provide access to the demangled name lookup
+ cache. */
+
+const struct partial_symbol *
+add_psymbol_to_list (char *name, int namelength, domain_enum domain,
enum address_class class,
struct psymbol_allocation_list *list, long val, /* Value as a long */
CORE_ADDR coreaddr, /* Value as a CORE_ADDR */
/* Create local copy of the partial symbol */
memcpy (buf, name, namelength);
buf[namelength] = '\0';
- SYMBOL_NAME (&psymbol) = bcache (buf, namelength + 1, objfile->psymbol_cache);
/* val and coreaddr are mutually exclusive, one of them *will* be zero */
if (val != 0)
{
}
SYMBOL_SECTION (&psymbol) = 0;
SYMBOL_LANGUAGE (&psymbol) = language;
- PSYMBOL_NAMESPACE (&psymbol) = namespace;
+ PSYMBOL_DOMAIN (&psymbol) = domain;
PSYMBOL_CLASS (&psymbol) = class;
- SYMBOL_INIT_LANGUAGE_SPECIFIC (&psymbol, language);
+
+ SYMBOL_SET_NAMES (&psymbol, buf, namelength, objfile);
/* Stash the partial symbol away in the cache */
psym = bcache (&psymbol, sizeof (struct partial_symbol), objfile->psymbol_cache);
}
*list->next++ = psym;
OBJSTAT (objfile, n_psyms++);
+
+ return psym;
}
/* Add a symbol with a long value to a psymtab. This differs from
void
add_psymbol_with_dem_name_to_list (char *name, int namelength, char *dem_name,
- int dem_namelength, namespace_enum namespace,
+ int dem_namelength, domain_enum domain,
enum address_class class,
struct psymbol_allocation_list *list, long val, /* Value as a long */
CORE_ADDR coreaddr, /* Value as a CORE_ADDR */
memcpy (buf, name, namelength);
buf[namelength] = '\0';
- SYMBOL_NAME (&psymbol) = bcache (buf, namelength + 1, objfile->psymbol_cache);
+ DEPRECATED_SYMBOL_NAME (&psymbol) = bcache (buf, namelength + 1, objfile->psymbol_cache);
buf = alloca (dem_namelength + 1);
memcpy (buf, dem_name, dem_namelength);
}
SYMBOL_SECTION (&psymbol) = 0;
SYMBOL_LANGUAGE (&psymbol) = language;
- PSYMBOL_NAMESPACE (&psymbol) = namespace;
+ PSYMBOL_DOMAIN (&psymbol) = domain;
PSYMBOL_CLASS (&psymbol) = class;
SYMBOL_INIT_LANGUAGE_SPECIFIC (&psymbol, language);
/* Return true if the mapped ranges of sections A and B overlap, false
otherwise. */
-int
+static int
sections_overlap (asection *a, asection *b)
{
/* FIXME: need bfd *, so we can use bfd_section_vma methods. */
}
}
+/* Set the output sections and output offsets for section SECTP in
+ ABFD. The relocation code in BFD will read these offsets, so we
+ need to be sure they're initialized. We map each section to itself,
+ with no offset; this means that SECTP->vma will be honored. */
+
+static void
+symfile_dummy_outputs (bfd *abfd, asection *sectp, void *dummy)
+{
+ sectp->output_section = sectp;
+ sectp->output_offset = 0;
+}
+
+/* Relocate the contents of a debug section SECTP in ABFD. The
+ contents are stored in BUF if it is non-NULL, or returned in a
+ malloc'd buffer otherwise.
+
+ For some platforms and debug info formats, shared libraries contain
+ relocations against the debug sections (particularly for DWARF-2;
+ one affected platform is PowerPC GNU/Linux, although it depends on
+ the version of the linker in use). Also, ELF object files naturally
+ have unresolved relocations for their debug sections. We need to apply
+ the relocations in order to get the locations of symbols correct. */
+
+bfd_byte *
+symfile_relocate_debug_section (bfd *abfd, asection *sectp, bfd_byte *buf)
+{
+ /* We're only interested in debugging sections with relocation
+ information. */
+ if ((sectp->flags & SEC_RELOC) == 0)
+ return NULL;
+ if ((sectp->flags & SEC_DEBUGGING) == 0)
+ return NULL;
+
+ /* We will handle section offsets properly elsewhere, so relocate as if
+ all sections begin at 0. */
+ bfd_map_over_sections (abfd, symfile_dummy_outputs, NULL);
+
+ return bfd_simple_get_relocated_section_contents (abfd, sectp, buf, NULL);
+}
void
_initialize_symfile (void)
&setlist));
add_show_from_set (c, &showlist);
set_cmd_completer (c, filename_completer);
-
}