terminal_is_ours = 2
};
-static enum terminal_state terminal_state;
+static enum terminal_state terminal_state = terminal_is_ours;
/* See target.h. */
instance, could have some of memory but delegate other bits to
the target below it. So, we must manually try all targets. */
-static enum target_xfer_status
+enum target_xfer_status
raw_memory_xfer_partial (struct target_ops *ops, gdb_byte *readbuf,
const gdb_byte *writebuf, ULONGEST memaddr, LONGEST len,
ULONGEST *xfered_len)
ULONGEST offset, LONGEST len)
{
LONGEST xfered_total = 0;
+ int unit_size = 1;
+
+ /* If we are reading from a memory object, find the length of an addressable
+ unit for that architecture. */
+ if (object == TARGET_OBJECT_MEMORY
+ || object == TARGET_OBJECT_STACK_MEMORY
+ || object == TARGET_OBJECT_CODE_MEMORY
+ || object == TARGET_OBJECT_RAW_MEMORY)
+ unit_size = gdbarch_addressable_memory_unit_size (target_gdbarch ());
while (xfered_total < len)
{
enum target_xfer_status status;
status = target_read_partial (ops, object, annex,
- buf + xfered_total,
+ buf + xfered_total * unit_size,
offset + xfered_total, len - xfered_total,
&xfered_partial);
static void
read_whatever_is_readable (struct target_ops *ops,
const ULONGEST begin, const ULONGEST end,
+ int unit_size,
VEC(memory_read_result_s) **result)
{
gdb_byte *buf = xmalloc (end - begin);
}
xfer = target_read (ops, TARGET_OBJECT_MEMORY, NULL,
- buf + (first_half_begin - begin),
+ buf + (first_half_begin - begin) * unit_size,
first_half_begin,
first_half_end - first_half_begin);
/* The [current_end, end) range has been read. */
LONGEST region_len = end - current_end;
- r.data = xmalloc (region_len);
- memcpy (r.data, buf + current_end - begin, region_len);
+ r.data = xmalloc (region_len * unit_size);
+ memcpy (r.data, buf + (current_end - begin) * unit_size,
+ region_len * unit_size);
r.begin = current_end;
r.end = end;
xfree (buf);
const ULONGEST offset, const LONGEST len)
{
VEC(memory_read_result_s) *result = 0;
+ int unit_size = gdbarch_addressable_memory_unit_size (target_gdbarch ());
LONGEST xfered_total = 0;
while (xfered_total < len)
else
{
LONGEST to_read = min (len - xfered_total, region_len);
- gdb_byte *buffer = (gdb_byte *)xmalloc (to_read);
+ gdb_byte *buffer = (gdb_byte *) xmalloc (to_read * unit_size);
LONGEST xfered_partial =
target_read (ops, TARGET_OBJECT_MEMORY, NULL,
/* Got an error reading full chunk. See if maybe we can read
some subrange. */
xfree (buffer);
- read_whatever_is_readable (ops, offset + xfered_total,
+ read_whatever_is_readable (ops, offset + xfered_total, unit_size,
offset + xfered_total + to_read, &result);
xfered_total += to_read;
}
void (*progress) (ULONGEST, void *), void *baton)
{
LONGEST xfered_total = 0;
+ int unit_size = 1;
+
+ /* If we are writing to a memory object, find the length of an addressable
+ unit for that architecture. */
+ if (object == TARGET_OBJECT_MEMORY
+ || object == TARGET_OBJECT_STACK_MEMORY
+ || object == TARGET_OBJECT_CODE_MEMORY
+ || object == TARGET_OBJECT_RAW_MEMORY)
+ unit_size = gdbarch_addressable_memory_unit_size (target_gdbarch ());
/* Give the progress callback a chance to set up. */
if (progress)
enum target_xfer_status status;
status = target_write_partial (ops, object, annex,
- (gdb_byte *) buf + xfered_total,
+ buf + xfered_total * unit_size,
offset + xfered_total, len - xfered_total,
&xfered_partial);
}
}
+/* See target.h. */
+
+void
+target_async (int enable)
+{
+ infrun_async (enable);
+ current_target.to_async (¤t_target, enable);
+}
+
/* Controls if targets can report that they can/are async. This is
just for maintainers to use when debugging gdb. */
int target_async_permitted = 1;
"asynchronous mode is %s.\n"), value);
}
+/* Return true if the target operates in non-stop mode even with "set
+ non-stop off". */
+
+static int
+target_always_non_stop_p (void)
+{
+ return current_target.to_always_non_stop_p (¤t_target);
+}
+
+/* See target.h. */
+
+int
+target_is_non_stop_p (void)
+{
+ return (non_stop
+ || target_non_stop_enabled == AUTO_BOOLEAN_TRUE
+ || (target_non_stop_enabled == AUTO_BOOLEAN_AUTO
+ && target_always_non_stop_p ()));
+}
+
+/* Controls if targets can report that they always run in non-stop
+ mode. This is just for maintainers to use when debugging gdb. */
+enum auto_boolean target_non_stop_enabled = AUTO_BOOLEAN_AUTO;
+
+/* The set command writes to this variable. If the inferior is
+ executing, target_non_stop_enabled is *not* updated. */
+static enum auto_boolean target_non_stop_enabled_1 = AUTO_BOOLEAN_AUTO;
+
+/* Implementation of "maint set target-non-stop". */
+
+static void
+maint_set_target_non_stop_command (char *args, int from_tty,
+ struct cmd_list_element *c)
+{
+ if (have_live_inferiors ())
+ {
+ target_non_stop_enabled_1 = target_non_stop_enabled;
+ error (_("Cannot change this setting while the inferior is running."));
+ }
+
+ target_non_stop_enabled = target_non_stop_enabled_1;
+}
+
+/* Implementation of "maint show target-non-stop". */
+
+static void
+maint_show_target_non_stop_command (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c,
+ const char *value)
+{
+ if (target_non_stop_enabled == AUTO_BOOLEAN_AUTO)
+ fprintf_filtered (file,
+ _("Whether the target is always in non-stop mode "
+ "is %s (currently %s).\n"), value,
+ target_always_non_stop_p () ? "on" : "off");
+ else
+ fprintf_filtered (file,
+ _("Whether the target is always in non-stop mode "
+ "is %s.\n"), value);
+}
+
/* Temporary copies of permission settings. */
static int may_write_registers_1 = 1;
&maintenance_set_cmdlist,
&maintenance_show_cmdlist);
+ add_setshow_auto_boolean_cmd ("target-non-stop", no_class,
+ &target_non_stop_enabled_1, _("\
+Set whether gdb always controls the inferior in non-stop mode."), _("\
+Show whether gdb always controls the inferior in non-stop mode."), _("\
+Tells gdb whether to control the inferior in non-stop mode."),
+ maint_set_target_non_stop_command,
+ maint_show_target_non_stop_command,
+ &maintenance_set_cmdlist,
+ &maintenance_show_cmdlist);
+
add_setshow_boolean_cmd ("may-write-registers", class_support,
&may_write_registers_1, _("\
Set permission to write into registers."), _("\
projects / deliverable / binutils-gdb.git / blobdiff