/* Interface between GDB and target environments, including files and processes
- Copyright (C) 1990-2014 Free Software Foundation, Inc.
+ Copyright (C) 1990-2016 Free Software Foundation, Inc.
Contributed by Cygnus Support. Written by John Gilmore.
struct traceframe_info;
struct expression;
struct dcache_struct;
+struct inferior;
+
+#include "infrun.h" /* For enum exec_direction_kind. */
+#include "breakpoint.h" /* For enum bptype. */
/* This include file defines the interface between the main part
of the debugger, and the part which is target-specific, or
it goes into the file stratum, which is always below the process
stratum. */
+#include "target/target.h"
#include "target/resume.h"
#include "target/wait.h"
#include "target/waitstatus.h"
#include "btrace.h"
#include "command.h"
+#include "break-common.h" /* For enum target_hw_bp_type. */
+
enum strata
{
dummy_stratum, /* The lowest of the low */
/* Process a normal inferior event which will result in target_wait
being called. */
INF_REG_EVENT,
- /* We are called because a timer went off. */
- INF_TIMER,
/* We are called to do stuff after the inferior stops. */
INF_EXEC_COMPLETE,
- /* We are called to do some stuff after the inferior stops, but we
- are expected to reenter the proceed() and
- handle_inferior_event() functions. This is used only in case of
- 'step n' like commands. */
- INF_EXEC_CONTINUE
};
\f
/* Target objects which can be transfered using target_read,
/* OpenVMS Unwind Information Block. */
TARGET_OBJECT_OPENVMS_UIB,
/* Branch trace data, in XML format. */
- TARGET_OBJECT_BTRACE
+ TARGET_OBJECT_BTRACE,
+ /* Branch trace configuration, in XML format. */
+ TARGET_OBJECT_BTRACE_CONF,
+ /* The pathname of the executable file that was run to create
+ a specified process. ANNEX should be a string representation
+ of the process ID of the process in question, in hexadecimal
+ format. */
+ TARGET_OBJECT_EXEC_FILE,
/* Possible future objects: TARGET_OBJECT_FILE, ... */
};
/* No further transfer is possible. */
TARGET_XFER_EOF = 0,
+ /* The piece of the object requested is unavailable. */
+ TARGET_XFER_UNAVAILABLE = 2,
+
/* Generic I/O error. Note that it's important that this is '-1',
as we still have target_xfer-related code returning hardcoded
'-1' on error. */
TARGET_XFER_E_IO = -1,
- /* Transfer failed because the piece of the object requested is
- unavailable. */
- TARGET_XFER_E_UNAVAILABLE = -2,
-
- /* Keep list in sync with target_xfer_error_to_string. */
+ /* Keep list in sync with target_xfer_status_to_string. */
};
-#define TARGET_XFER_STATUS_ERROR_P(STATUS) ((STATUS) < TARGET_XFER_EOF)
+/* Return the string form of STATUS. */
-/* Return the string form of ERR. */
-
-extern const char *target_xfer_status_to_string (enum target_xfer_status err);
+extern const char *
+ target_xfer_status_to_string (enum target_xfer_status status);
/* Enumeration of the kinds of traceframe searches that a target may
be able to perform. */
ULONGEST len,
ULONGEST *xfered_len);
-/* Request that OPS transfer up to LEN 8-bit bytes of the target's
- OBJECT. The OFFSET, for a seekable object, specifies the
- starting point. The ANNEX can be used to provide additional
- data-specific information to the target.
-
- Return the number of bytes actually transfered, or a negative error
- code (an 'enum target_xfer_error' value) if the transfer is not
+enum target_xfer_status
+ raw_memory_xfer_partial (struct target_ops *ops, gdb_byte *readbuf,
+ const gdb_byte *writebuf, ULONGEST memaddr,
+ LONGEST len, ULONGEST *xfered_len);
+
+/* Request that OPS transfer up to LEN addressable units of the target's
+ OBJECT. When reading from a memory object, the size of an addressable unit
+ is architecture dependent and can be found using
+ gdbarch_addressable_memory_unit_size. Otherwise, an addressable unit is 1
+ byte long. BUF should point to a buffer large enough to hold the read data,
+ taking into account the addressable unit size. The OFFSET, for a seekable
+ object, specifies the starting point. The ANNEX can be used to provide
+ additional data-specific information to the target.
+
+ Return the number of addressable units actually transferred, or a negative
+ error code (an 'enum target_xfer_error' value) if the transfer is not
supported or otherwise fails. Return of a positive value less than
LEN indicates that no further transfer is possible. Unlike the raw
to_xfer_partial interface, callers of these functions do not need
extern void free_memory_read_result_vector (void *);
extern VEC(memory_read_result_s)* read_memory_robust (struct target_ops *ops,
- ULONGEST offset,
- LONGEST len);
-
+ const ULONGEST offset,
+ const LONGEST len);
+
+/* Request that OPS transfer up to LEN addressable units from BUF to the
+ target's OBJECT. When writing to a memory object, the addressable unit
+ size is architecture dependent and can be found using
+ gdbarch_addressable_memory_unit_size. Otherwise, an addressable unit is 1
+ byte long. The OFFSET, for a seekable object, specifies the starting point.
+ The ANNEX can be used to provide additional data-specific information to
+ the target.
+
+ Return the number of addressable units actually transferred, or a negative
+ error code (an 'enum target_xfer_status' value) if the transfer is not
+ supported or otherwise fails. Return of a positive value less than
+ LEN indicates that no further transfer is possible. Unlike the raw
+ to_xfer_partial interface, callers of these functions do not need to
+ retry partial transfers. */
+
extern LONGEST target_write (struct target_ops *ops,
enum target_object object,
const char *annex, const gdb_byte *buf,
typedef void async_callback_ftype (enum inferior_event_type event_type,
void *context);
+/* Normally target debug printing is purely type-based. However,
+ sometimes it is necessary to override the debug printing on a
+ per-argument basis. This macro can be used, attribute-style, to
+ name the target debug printing function for a particular method
+ argument. FUNC is the name of the function. The macro's
+ definition is empty because it is only used by the
+ make-target-delegates script. */
+
+#define TARGET_DEBUG_PRINTER(FUNC)
+
/* These defines are used to mark target_ops methods. The script
make-target-delegates scans these and auto-generates the base
method implementations. There are four macros that can be used:
struct target_ops
{
struct target_ops *beneath; /* To the target under this one. */
- char *to_shortname; /* Name this target type */
- char *to_longname; /* Name for printing */
- char *to_doc; /* Documentation. Does not include trailing
+ const char *to_shortname; /* Name this target type */
+ const char *to_longname; /* Name for printing */
+ const char *to_doc; /* Documentation. Does not include trailing
newline, and starts with a one-line descrip-
tion (probably similar to to_longname). */
/* Per-target scratch pad. */
command, and (if successful) pushes a new target onto the
stack. Targets should supply this routine, if only to provide
an error message. */
- void (*to_open) (char *, int);
+ void (*to_open) (const char *, int);
/* Old targets with a static target vector provide "to_close".
New re-entrant targets provide "to_xclose" and that is expected
to xfree everything (including the "struct target_ops"). */
void (*to_xclose) (struct target_ops *targ);
void (*to_close) (struct target_ops *);
- void (*to_attach) (struct target_ops *ops, char *, int)
- TARGET_DEFAULT_FUNC (find_default_attach);
+ /* Attaches to a process on the target side. Arguments are as
+ passed to the `attach' command by the user. This routine can
+ be called when the target is not on the target-stack, if the
+ target_can_run routine returns 1; in that case, it must push
+ itself onto the stack. Upon exit, the target should be ready
+ for normal operations, and should be ready to deliver the
+ status of the process immediately (without waiting) to an
+ upcoming target_wait call. */
+ void (*to_attach) (struct target_ops *ops, const char *, int);
void (*to_post_attach) (struct target_ops *, int)
TARGET_DEFAULT_IGNORE ();
void (*to_detach) (struct target_ops *ops, const char *, int)
TARGET_DEFAULT_IGNORE ();
- void (*to_disconnect) (struct target_ops *, char *, int)
+ void (*to_disconnect) (struct target_ops *, const char *, int)
TARGET_DEFAULT_NORETURN (tcomplain ());
- void (*to_resume) (struct target_ops *, ptid_t, int, enum gdb_signal)
+ void (*to_resume) (struct target_ops *, ptid_t,
+ int TARGET_DEBUG_PRINTER (target_debug_print_step),
+ enum gdb_signal)
TARGET_DEFAULT_NORETURN (noprocess ());
ptid_t (*to_wait) (struct target_ops *,
- ptid_t, struct target_waitstatus *, int)
- TARGET_DEFAULT_NORETURN (noprocess ());
+ ptid_t, struct target_waitstatus *,
+ int TARGET_DEBUG_PRINTER (target_debug_print_options))
+ TARGET_DEFAULT_FUNC (default_target_wait);
void (*to_fetch_registers) (struct target_ops *, struct regcache *, int)
TARGET_DEFAULT_IGNORE ();
void (*to_store_registers) (struct target_ops *, struct regcache *, int)
void (*to_prepare_to_store) (struct target_ops *, struct regcache *)
TARGET_DEFAULT_NORETURN (noprocess ());
- /* Transfer LEN bytes of memory between GDB address MYADDR and
- target address MEMADDR. If WRITE, transfer them to the target, else
- transfer them from the target. TARGET is the target from which we
- get this function.
-
- Return value, N, is one of the following:
-
- 0 means that we can't handle this. If errno has been set, it is the
- error which prevented us from doing it (FIXME: What about bfd_error?).
-
- positive (call it N) means that we have transferred N bytes
- starting at MEMADDR. We might be able to handle more bytes
- beyond this length, but no promises.
-
- negative (call its absolute value N) means that we cannot
- transfer right at MEMADDR, but we could transfer at least
- something at MEMADDR + N.
-
- NOTE: cagney/2004-10-01: This has been entirely superseeded by
- to_xfer_partial and inferior inheritance. */
-
- int (*deprecated_xfer_memory) (CORE_ADDR memaddr, gdb_byte *myaddr,
- int len, int write,
- struct mem_attrib *attrib,
- struct target_ops *target);
-
void (*to_files_info) (struct target_ops *)
TARGET_DEFAULT_IGNORE ();
int (*to_insert_breakpoint) (struct target_ops *, struct gdbarch *,
struct bp_target_info *)
TARGET_DEFAULT_FUNC (memory_insert_breakpoint);
int (*to_remove_breakpoint) (struct target_ops *, struct gdbarch *,
- struct bp_target_info *)
+ struct bp_target_info *,
+ enum remove_bp_reason)
TARGET_DEFAULT_FUNC (memory_remove_breakpoint);
- int (*to_can_use_hw_breakpoint) (struct target_ops *, int, int, int)
+
+ /* Returns true if the target stopped because it executed a
+ software breakpoint. This is necessary for correct background
+ execution / non-stop mode operation, and for correct PC
+ adjustment on targets where the PC needs to be adjusted when a
+ software breakpoint triggers. In these modes, by the time GDB
+ processes a breakpoint event, the breakpoint may already be
+ done from the target, so GDB needs to be able to tell whether
+ it should ignore the event and whether it should adjust the PC.
+ See adjust_pc_after_break. */
+ int (*to_stopped_by_sw_breakpoint) (struct target_ops *)
+ TARGET_DEFAULT_RETURN (0);
+ /* Returns true if the above method is supported. */
+ int (*to_supports_stopped_by_sw_breakpoint) (struct target_ops *)
+ TARGET_DEFAULT_RETURN (0);
+
+ /* Returns true if the target stopped for a hardware breakpoint.
+ Likewise, if the target supports hardware breakpoints, this
+ method is necessary for correct background execution / non-stop
+ mode operation. Even though hardware breakpoints do not
+ require PC adjustment, GDB needs to be able to tell whether the
+ hardware breakpoint event is a delayed event for a breakpoint
+ that is already gone and should thus be ignored. */
+ int (*to_stopped_by_hw_breakpoint) (struct target_ops *)
+ TARGET_DEFAULT_RETURN (0);
+ /* Returns true if the above method is supported. */
+ int (*to_supports_stopped_by_hw_breakpoint) (struct target_ops *)
+ TARGET_DEFAULT_RETURN (0);
+
+ int (*to_can_use_hw_breakpoint) (struct target_ops *,
+ enum bptype, int, int)
TARGET_DEFAULT_RETURN (0);
int (*to_ranged_break_num_registers) (struct target_ops *)
TARGET_DEFAULT_RETURN (-1);
/* Documentation of what the two routines below are expected to do is
provided with the corresponding target_* macros. */
- int (*to_remove_watchpoint) (struct target_ops *,
- CORE_ADDR, int, int, struct expression *)
+ int (*to_remove_watchpoint) (struct target_ops *, CORE_ADDR, int,
+ enum target_hw_bp_type, struct expression *)
TARGET_DEFAULT_RETURN (-1);
- int (*to_insert_watchpoint) (struct target_ops *,
- CORE_ADDR, int, int, struct expression *)
+ int (*to_insert_watchpoint) (struct target_ops *, CORE_ADDR, int,
+ enum target_hw_bp_type, struct expression *)
TARGET_DEFAULT_RETURN (-1);
int (*to_insert_mask_watchpoint) (struct target_ops *,
- CORE_ADDR, CORE_ADDR, int)
+ CORE_ADDR, CORE_ADDR,
+ enum target_hw_bp_type)
TARGET_DEFAULT_RETURN (1);
int (*to_remove_mask_watchpoint) (struct target_ops *,
- CORE_ADDR, CORE_ADDR, int)
+ CORE_ADDR, CORE_ADDR,
+ enum target_hw_bp_type)
TARGET_DEFAULT_RETURN (1);
int (*to_stopped_by_watchpoint) (struct target_ops *)
TARGET_DEFAULT_RETURN (0);
int (*to_masked_watch_num_registers) (struct target_ops *,
CORE_ADDR, CORE_ADDR)
TARGET_DEFAULT_RETURN (-1);
+
+ /* Return 1 for sure target can do single step. Return -1 for
+ unknown. Return 0 for target can't do. */
+ int (*to_can_do_single_step) (struct target_ops *)
+ TARGET_DEFAULT_RETURN (-1);
+
void (*to_terminal_init) (struct target_ops *)
TARGET_DEFAULT_IGNORE ();
void (*to_terminal_inferior) (struct target_ops *)
TARGET_DEFAULT_IGNORE ();
void (*to_terminal_ours) (struct target_ops *)
TARGET_DEFAULT_IGNORE ();
- void (*to_terminal_save_ours) (struct target_ops *)
- TARGET_DEFAULT_IGNORE ();
void (*to_terminal_info) (struct target_ops *, const char *, int)
TARGET_DEFAULT_FUNC (default_terminal_info);
void (*to_kill) (struct target_ops *)
TARGET_DEFAULT_NORETURN (noprocess ());
- void (*to_load) (struct target_ops *, char *, int)
+ void (*to_load) (struct target_ops *, const char *, int)
TARGET_DEFAULT_NORETURN (tcomplain ());
+ /* Start an inferior process and set inferior_ptid to its pid.
+ EXEC_FILE is the file to run.
+ ALLARGS is a string containing the arguments to the program.
+ ENV is the environment vector to pass. Errors reported with error().
+ On VxWorks and various standalone systems, we ignore exec_file. */
void (*to_create_inferior) (struct target_ops *,
char *, char *, char **, int);
void (*to_post_startup_inferior) (struct target_ops *, ptid_t)
TARGET_DEFAULT_RETURN (1);
int (*to_remove_exec_catchpoint) (struct target_ops *, int)
TARGET_DEFAULT_RETURN (1);
+ void (*to_follow_exec) (struct target_ops *, struct inferior *, char *)
+ TARGET_DEFAULT_IGNORE ();
int (*to_set_syscall_catchpoint) (struct target_ops *,
int, int, int, int, int *)
TARGET_DEFAULT_RETURN (1);
TARGET_DEFAULT_RETURN (0);
void (*to_mourn_inferior) (struct target_ops *)
TARGET_DEFAULT_FUNC (default_mourn_inferior);
+ /* Note that to_can_run is special and can be invoked on an
+ unpushed target. Targets defining this method must also define
+ to_can_async_p and to_supports_non_stop. */
int (*to_can_run) (struct target_ops *)
TARGET_DEFAULT_RETURN (0);
/* Documentation of this routine is provided with the corresponding
target_* macro. */
- void (*to_pass_signals) (struct target_ops *, int, unsigned char *)
+ void (*to_pass_signals) (struct target_ops *, int,
+ unsigned char * TARGET_DEBUG_PRINTER (target_debug_print_signals))
TARGET_DEFAULT_IGNORE ();
/* Documentation of this routine is provided with the
corresponding target_* function. */
- void (*to_program_signals) (struct target_ops *, int, unsigned char *)
+ void (*to_program_signals) (struct target_ops *, int,
+ unsigned char * TARGET_DEBUG_PRINTER (target_debug_print_signals))
TARGET_DEFAULT_IGNORE ();
int (*to_thread_alive) (struct target_ops *, ptid_t ptid)
TARGET_DEFAULT_RETURN (0);
- void (*to_find_new_threads) (struct target_ops *)
+ void (*to_update_thread_list) (struct target_ops *)
TARGET_DEFAULT_IGNORE ();
char *(*to_pid_to_str) (struct target_ops *, ptid_t)
TARGET_DEFAULT_FUNC (default_pid_to_str);
char *(*to_extra_thread_info) (struct target_ops *, struct thread_info *)
TARGET_DEFAULT_RETURN (NULL);
- char *(*to_thread_name) (struct target_ops *, struct thread_info *)
+ const char *(*to_thread_name) (struct target_ops *, struct thread_info *)
TARGET_DEFAULT_RETURN (NULL);
void (*to_stop) (struct target_ops *, ptid_t)
TARGET_DEFAULT_IGNORE ();
+ void (*to_interrupt) (struct target_ops *, ptid_t)
+ TARGET_DEFAULT_IGNORE ();
+ void (*to_pass_ctrlc) (struct target_ops *)
+ TARGET_DEFAULT_FUNC (default_target_pass_ctrlc);
void (*to_rcmd) (struct target_ops *,
- char *command, struct ui_file *output)
+ const char *command, struct ui_file *output)
TARGET_DEFAULT_FUNC (default_rcmd);
char *(*to_pid_to_exec_file) (struct target_ops *, int pid)
TARGET_DEFAULT_RETURN (NULL);
int (*to_has_execution) (struct target_ops *, ptid_t);
int to_has_thread_control; /* control thread execution */
int to_attach_no_wait;
- /* ASYNC target controls */
+ /* This method must be implemented in some situations. See the
+ comment on 'to_can_run'. */
int (*to_can_async_p) (struct target_ops *)
- TARGET_DEFAULT_FUNC (find_default_can_async_p);
+ TARGET_DEFAULT_RETURN (0);
int (*to_is_async_p) (struct target_ops *)
- TARGET_DEFAULT_FUNC (find_default_is_async_p);
- void (*to_async) (struct target_ops *, async_callback_ftype *, void *)
+ TARGET_DEFAULT_RETURN (0);
+ void (*to_async) (struct target_ops *, int)
TARGET_DEFAULT_NORETURN (tcomplain ());
- int (*to_supports_non_stop) (struct target_ops *);
+ void (*to_thread_events) (struct target_ops *, int)
+ TARGET_DEFAULT_IGNORE ();
+ /* This method must be implemented in some situations. See the
+ comment on 'to_can_run'. */
+ int (*to_supports_non_stop) (struct target_ops *)
+ TARGET_DEFAULT_RETURN (0);
+ /* Return true if the target operates in non-stop mode even with
+ "set non-stop off". */
+ int (*to_always_non_stop_p) (struct target_ops *)
+ TARGET_DEFAULT_RETURN (0);
/* find_memory_regions support method for gcore */
int (*to_find_memory_regions) (struct target_ops *,
find_memory_region_ftype func, void *data)
char * (*to_make_corefile_notes) (struct target_ops *, bfd *, int *)
TARGET_DEFAULT_FUNC (dummy_make_corefile_notes);
/* get_bookmark support method for bookmarks */
- gdb_byte * (*to_get_bookmark) (struct target_ops *, char *, int)
+ gdb_byte * (*to_get_bookmark) (struct target_ops *, const char *, int)
TARGET_DEFAULT_NORETURN (tcomplain ());
/* goto_bookmark support method for bookmarks */
- void (*to_goto_bookmark) (struct target_ops *, gdb_byte *, int)
+ void (*to_goto_bookmark) (struct target_ops *, const gdb_byte *, int)
TARGET_DEFAULT_NORETURN (tcomplain ());
/* Return the thread-local address at OFFSET in the
thread-local storage for the thread PTID and the shared library
or executable file given by OBJFILE. If that block of
thread-local storage hasn't been allocated yet, this function
- may return an error. */
+ may return an error. LOAD_MODULE_ADDR may be zero for statically
+ linked multithreaded inferiors. */
CORE_ADDR (*to_get_thread_local_address) (struct target_ops *ops,
ptid_t ptid,
CORE_ADDR load_module_addr,
- CORE_ADDR offset);
+ CORE_ADDR offset)
+ TARGET_DEFAULT_NORETURN (generic_tls_error ());
/* Request that OPS transfer up to LEN 8-bit bytes of the target's
OBJECT. The OFFSET, for a seekable object, specifies the
'enum target_xfer_status' value). Save the number of bytes
actually transferred in *XFERED_LEN if transfer is successful
(TARGET_XFER_OK) or the number unavailable bytes if the requested
- data is unavailable (TARGET_XFER_E_UNAVAILABLE). *XFERED_LEN
+ data is unavailable (TARGET_XFER_UNAVAILABLE). *XFERED_LEN
smaller than LEN does not indicate the end of the object, only
the end of the transfer; higher level code should continue
transferring if desired. This is handled in target.c.
ULONGEST *xfered_len)
TARGET_DEFAULT_RETURN (TARGET_XFER_E_IO);
+ /* Return the limit on the size of any single memory transfer
+ for the target. */
+
+ ULONGEST (*to_get_memory_xfer_limit) (struct target_ops *)
+ TARGET_DEFAULT_RETURN (ULONGEST_MAX);
+
/* Returns the memory map for the target. A return value of NULL
means that no memory map is available. If a memory address
does not fall within any returned regions, it's assumed to be
The default implementation always returns the inferior's
address space. */
struct address_space *(*to_thread_address_space) (struct target_ops *,
- ptid_t);
+ ptid_t)
+ TARGET_DEFAULT_FUNC (default_thread_address_space);
/* Target file operations. */
- /* Open FILENAME on the target, using FLAGS and MODE. Return a
+ /* Return nonzero if the filesystem seen by the current inferior
+ is the local filesystem, zero otherwise. */
+ int (*to_filesystem_is_local) (struct target_ops *)
+ TARGET_DEFAULT_RETURN (1);
+
+ /* Open FILENAME on the target, in the filesystem as seen by INF,
+ using FLAGS and MODE. If INF is NULL, use the filesystem seen
+ by the debugger (GDB or, for remote targets, the remote stub).
+ If WARN_IF_SLOW is nonzero, print a warning message if the file
+ is being accessed over a link that may be slow. Return a
target file descriptor, or -1 if an error occurs (and set
*TARGET_ERRNO). */
int (*to_fileio_open) (struct target_ops *,
- const char *filename, int flags, int mode,
+ struct inferior *inf, const char *filename,
+ int flags, int mode, int warn_if_slow,
int *target_errno);
/* Write up to LEN bytes from WRITE_BUF to FD on the target.
int fd, gdb_byte *read_buf, int len,
ULONGEST offset, int *target_errno);
+ /* Get information about the file opened as FD and put it in
+ SB. Return 0 on success, or -1 if an error occurs (and set
+ *TARGET_ERRNO). */
+ int (*to_fileio_fstat) (struct target_ops *,
+ int fd, struct stat *sb, int *target_errno);
+
/* Close FD on the target. Return 0, or -1 if an error occurs
(and set *TARGET_ERRNO). */
int (*to_fileio_close) (struct target_ops *, int fd, int *target_errno);
- /* Unlink FILENAME on the target. Return 0, or -1 if an error
- occurs (and set *TARGET_ERRNO). */
+ /* Unlink FILENAME on the target, in the filesystem as seen by
+ INF. If INF is NULL, use the filesystem seen by the debugger
+ (GDB or, for remote targets, the remote stub). Return 0, or
+ -1 if an error occurs (and set *TARGET_ERRNO). */
int (*to_fileio_unlink) (struct target_ops *,
- const char *filename, int *target_errno);
-
- /* Read value of symbolic link FILENAME on the target. Return a
- null-terminated string allocated via xmalloc, or NULL if an error
- occurs (and set *TARGET_ERRNO). */
+ struct inferior *inf,
+ const char *filename,
+ int *target_errno);
+
+ /* Read value of symbolic link FILENAME on the target, in the
+ filesystem as seen by INF. If INF is NULL, use the filesystem
+ seen by the debugger (GDB or, for remote targets, the remote
+ stub). Return a null-terminated string allocated via xmalloc,
+ or NULL if an error occurs (and set *TARGET_ERRNO). */
char *(*to_fileio_readlink) (struct target_ops *,
- const char *filename, int *target_errno);
+ struct inferior *inf,
+ const char *filename,
+ int *target_errno);
/* Implement the "info proc" command. */
- void (*to_info_proc) (struct target_ops *, char *, enum info_proc_what);
+ void (*to_info_proc) (struct target_ops *, const char *,
+ enum info_proc_what);
/* Tracepoint-related operations. */
encountered while reading memory. */
int (*to_verify_memory) (struct target_ops *, const gdb_byte *data,
CORE_ADDR memaddr, ULONGEST size)
- TARGET_DEFAULT_NORETURN (tcomplain ());
+ TARGET_DEFAULT_FUNC (default_verify_memory);
/* Return the address of the start of the Thread Information Block
a Windows OS specific feature. */
TARGET_DEFAULT_NORETURN (tcomplain ());
/* Return a traceframe info object describing the current
- traceframe's contents. If the target doesn't support
- traceframe info, return NULL. If the current traceframe is not
- selected (the current traceframe number is -1), the target can
- choose to return either NULL or an empty traceframe info. If
- NULL is returned, for example in remote target, GDB will read
- from the live inferior. If an empty traceframe info is
- returned, for example in tfile target, which means the
- traceframe info is available, but the requested memory is not
- available in it. GDB will try to see if the requested memory
- is available in the read-only sections. This method should not
- cache data; higher layers take care of caching, invalidating,
- and re-fetching when necessary. */
+ traceframe's contents. This method should not cache data;
+ higher layers take care of caching, invalidating, and
+ re-fetching when necessary. */
struct traceframe_info *(*to_traceframe_info) (struct target_ops *)
- TARGET_DEFAULT_RETURN (NULL);
+ TARGET_DEFAULT_NORETURN (tcomplain ());
/* Ask the target to use or not to use agent according to USE. Return 1
successful, 0 otherwise. */
TARGET_DEFAULT_RETURN (0);
/* Check whether the target supports branch tracing. */
- int (*to_supports_btrace) (struct target_ops *)
+ int (*to_supports_btrace) (struct target_ops *, enum btrace_format)
TARGET_DEFAULT_RETURN (0);
- /* Enable branch tracing for PTID and allocate a branch trace target
- information struct for reading and for disabling branch trace. */
+ /* Enable branch tracing for PTID using CONF configuration.
+ Return a branch trace target information struct for reading and for
+ disabling branch trace. */
struct btrace_target_info *(*to_enable_btrace) (struct target_ops *,
- ptid_t ptid)
+ ptid_t ptid,
+ const struct btrace_config *conf)
TARGET_DEFAULT_NORETURN (tcomplain ());
/* Disable branch tracing and deallocate TINFO. */
TARGET_DEFAULT_NORETURN (tcomplain ());
/* Read branch trace data for the thread indicated by BTINFO into DATA.
- DATA is cleared before new trace is added.
- The branch trace will start with the most recent block and continue
- towards older blocks. */
+ DATA is cleared before new trace is added. */
enum btrace_error (*to_read_btrace) (struct target_ops *self,
- VEC (btrace_block_s) **data,
+ struct btrace_data *data,
struct btrace_target_info *btinfo,
enum btrace_read_type type)
TARGET_DEFAULT_NORETURN (tcomplain ());
+ /* Get the branch trace configuration. */
+ const struct btrace_config *(*to_btrace_conf) (struct target_ops *self,
+ const struct btrace_target_info *)
+ TARGET_DEFAULT_RETURN (NULL);
+
/* Stop trace recording. */
void (*to_stop_recording) (struct target_ops *)
TARGET_DEFAULT_IGNORE ();
/* Print information about the recording. */
- void (*to_info_record) (struct target_ops *);
+ void (*to_info_record) (struct target_ops *)
+ TARGET_DEFAULT_IGNORE ();
/* Save the recorded execution trace into a file. */
void (*to_save_record) (struct target_ops *, const char *filename)
TARGET_DEFAULT_NORETURN (tcomplain ());
- /* Delete the recorded execution trace from the current position onwards. */
+ /* Delete the recorded execution trace from the current position
+ onwards. */
void (*to_delete_record) (struct target_ops *)
TARGET_DEFAULT_NORETURN (tcomplain ());
- /* Query if the record target is currently replaying. */
- int (*to_record_is_replaying) (struct target_ops *)
+ /* Query if the record target is currently replaying PTID. */
+ int (*to_record_is_replaying) (struct target_ops *, ptid_t ptid)
TARGET_DEFAULT_RETURN (0);
+ /* Query if the record target will replay PTID if it were resumed in
+ execution direction DIR. */
+ int (*to_record_will_replay) (struct target_ops *, ptid_t ptid, int dir)
+ TARGET_DEFAULT_RETURN (0);
+
+ /* Stop replaying. */
+ void (*to_record_stop_replaying) (struct target_ops *)
+ TARGET_DEFAULT_IGNORE ();
+
/* Go to the begin of the execution trace. */
void (*to_goto_record_begin) (struct target_ops *)
TARGET_DEFAULT_NORETURN (tcomplain ());
int (*to_augmented_libraries_svr4_read) (struct target_ops *)
TARGET_DEFAULT_RETURN (0);
- /* Those unwinders are tried before any other arch unwinders. Use NULL if
- it is not used. */
- const struct frame_unwind *to_get_unwinder;
- const struct frame_unwind *to_get_tailcall_unwinder;
+ /* Those unwinders are tried before any other arch unwinders. If
+ SELF doesn't have unwinders, it should delegate to the
+ "beneath" target. */
+ const struct frame_unwind *(*to_get_unwinder) (struct target_ops *self)
+ TARGET_DEFAULT_RETURN (NULL);
+
+ const struct frame_unwind *(*to_get_tailcall_unwinder) (struct target_ops *self)
+ TARGET_DEFAULT_RETURN (NULL);
+
+ /* Prepare to generate a core file. */
+ void (*to_prepare_to_generate_core) (struct target_ops *)
+ TARGET_DEFAULT_IGNORE ();
- /* Return the number of bytes by which the PC needs to be decremented
- after executing a breakpoint instruction.
- Defaults to gdbarch_decr_pc_after_break (GDBARCH). */
- CORE_ADDR (*to_decr_pc_after_break) (struct target_ops *ops,
- struct gdbarch *gdbarch)
- TARGET_DEFAULT_FUNC (default_target_decr_pc_after_break);
+ /* Cleanup after generating a core file. */
+ void (*to_done_generating_core) (struct target_ops *)
+ TARGET_DEFAULT_IGNORE ();
int to_magic;
/* Need sub-structure for target machine related rather than comm related?
void target_close (struct target_ops *targ);
-/* Attaches to a process on the target side. Arguments are as passed
- to the `attach' command by the user. This routine can be called
- when the target is not on the target-stack, if the target_can_run
- routine returns 1; in that case, it must push itself onto the stack.
- Upon exit, the target should be ready for normal operations, and
- should be ready to deliver the status of the process immediately
- (without waiting) to an upcoming target_wait call. */
+/* Find the correct target to use for "attach". If a target on the
+ current stack supports attaching, then it is returned. Otherwise,
+ the default run target is returned. */
+
+extern struct target_ops *find_attach_target (void);
-void target_attach (char *, int);
+/* Find the correct target to use for "run". If a target on the
+ current stack supports creating a new inferior, then it is
+ returned. Otherwise, the default run target is returned. */
+
+extern struct target_ops *find_run_target (void);
/* Some targets don't generate traps when attaching to the inferior,
or their target_attach implementation takes care of the waiting.
#define target_post_attach(pid) \
(*current_target.to_post_attach) (¤t_target, pid)
+/* Display a message indicating we're about to detach from the current
+ inferior process. */
+
+extern void target_announce_detach (int from_tty);
+
/* Takes a program previously attached to and detaches it.
The program may resume execution (some targets do, some don't) and will
no longer stop on signals, etc. We better not have left any breakpoints
/* Disconnect from the current target without resuming it (leaving it
waiting for a debugger). */
-extern void target_disconnect (char *, int);
+extern void target_disconnect (const char *, int);
/* Resume execution of the target process PTID (or a group of
- threads). STEP says whether to single-step or to run free; SIGGNAL
- is the signal to be given to the target, or GDB_SIGNAL_0 for no
+ threads). STEP says whether to hardware single-step or to run free;
+ SIGGNAL is the signal to be given to the target, or GDB_SIGNAL_0 for no
signal. The caller may not pass GDB_SIGNAL_DEFAULT. A specific
PTID means `step/resume only this process id'. A wildcard PTID
(all threads, or all threads of process) means `step/resume
extern void target_resume (ptid_t ptid, int step, enum gdb_signal signal);
-/* Wait for process pid to do something. PTID = -1 to wait for any
- pid to do something. Return pid of child, or -1 in case of error;
- store status through argument pointer STATUS. Note that it is
- _NOT_ OK to throw_exception() out of target_wait() without popping
- the debugging target from the stack; GDB isn't prepared to get back
- to the prompt with a debugging target but without the frame cache,
- stop_pc, etc., set up. OPTIONS is a bitwise OR of TARGET_W*
- options. */
+/* For target_read_memory see target/target.h. */
+
+/* The default target_ops::to_wait implementation. */
-extern ptid_t target_wait (ptid_t ptid, struct target_waitstatus *status,
- int options);
+extern ptid_t default_target_wait (struct target_ops *ops,
+ ptid_t ptid,
+ struct target_waitstatus *status,
+ int options);
/* Fetch at least register REGNO, or all regs if regno == -1. No result. */
an error was encountered while attempting to handle the
request. */
-int target_info_proc (char *, enum info_proc_what);
-
-/* Returns true if this target can debug multiple processes
- simultaneously. */
-
-#define target_supports_multi_process() \
- (*current_target.to_supports_multi_process) (¤t_target)
+int target_info_proc (const char *, enum info_proc_what);
/* Returns true if this target can disable address space randomization. */
extern int target_read_string (CORE_ADDR, char **, int, int *);
-extern int target_read_memory (CORE_ADDR memaddr, gdb_byte *myaddr,
- ssize_t len);
+/* For target_read_memory see target/target.h. */
extern int target_read_raw_memory (CORE_ADDR memaddr, gdb_byte *myaddr,
ssize_t len);
extern int target_read_code (CORE_ADDR memaddr, gdb_byte *myaddr, ssize_t len);
-extern int target_write_memory (CORE_ADDR memaddr, const gdb_byte *myaddr,
- ssize_t len);
+/* For target_write_memory see target/target.h. */
extern int target_write_raw_memory (CORE_ADDR memaddr, const gdb_byte *myaddr,
ssize_t len);
#define target_files_info() \
(*current_target.to_files_info) (¤t_target)
-/* Insert a hardware breakpoint at address BP_TGT->placed_address in
+/* Insert a breakpoint at address BP_TGT->placed_address in
the target machine. Returns 0 for success, and returns non-zero or
throws an error (with a detailed failure reason error code and
message) otherwise. */
machine. Result is 0 for success, non-zero for error. */
extern int target_remove_breakpoint (struct gdbarch *gdbarch,
- struct bp_target_info *bp_tgt);
+ struct bp_target_info *bp_tgt,
+ enum remove_bp_reason reason);
+
+/* Returns true if the terminal settings of the inferior are in
+ effect. */
+
+extern int target_terminal_is_inferior (void);
+
+/* Returns true if our terminal settings are in effect. */
+
+extern int target_terminal_is_ours (void);
/* Initialize the terminal settings we record for the inferior,
before we actually run the inferior. */
-#define target_terminal_init() \
- (*current_target.to_terminal_init) (¤t_target)
+extern void target_terminal_init (void);
-/* Put the inferior's terminal settings into effect.
- This is preparation for starting or resuming the inferior. */
+/* Put the inferior's terminal settings into effect. This is
+ preparation for starting or resuming the inferior. This is a no-op
+ unless called with the main UI as current UI. */
extern void target_terminal_inferior (void);
-/* Put some of our terminal settings into effect,
- enough to get proper results from our output,
- but do not change into or out of RAW mode
- so that no input is discarded.
+/* Put some of our terminal settings into effect, enough to get proper
+ results from our output, but do not change into or out of RAW mode
+ so that no input is discarded. This is a no-op if terminal_ours
+ was most recently called. This is a no-op unless called with the main
+ UI as current UI. */
- After doing this, either terminal_ours or terminal_inferior
- should be called to get back to a normal state of affairs. */
+extern void target_terminal_ours_for_output (void);
-#define target_terminal_ours_for_output() \
- (*current_target.to_terminal_ours_for_output) (¤t_target)
+/* Put our terminal settings into effect. First record the inferior's
+ terminal settings so they can be restored properly later. This is
+ a no-op unless called with the main UI as current UI. */
-/* Put our terminal settings into effect.
- First record the inferior's terminal settings
- so they can be restored properly later. */
+extern void target_terminal_ours (void);
-#define target_terminal_ours() \
- (*current_target.to_terminal_ours) (¤t_target)
+/* Return true if the target stack has a non-default
+ "to_terminal_ours" method. */
-/* Save our terminal settings.
- This is called from TUI after entering or leaving the curses
- mode. Since curses modifies our terminal this call is here
- to take this change into account. */
+extern int target_supports_terminal_ours (void);
-#define target_terminal_save_ours() \
- (*current_target.to_terminal_save_ours) (¤t_target)
+/* Make a cleanup that restores the state of the terminal to the current
+ state. */
+extern struct cleanup *make_cleanup_restore_target_terminal (void);
/* Print useful information about our terminal status, if such a thing
exists. */
sections. The target may define switches, or other non-switch
arguments, as it pleases. */
-extern void target_load (char *arg, int from_tty);
-
-/* Start an inferior process and set inferior_ptid to its pid.
- EXEC_FILE is the file to run.
- ALLARGS is a string containing the arguments to the program.
- ENV is the environment vector to pass. Errors reported with error().
- On VxWorks and various standalone systems, we ignore exec_file. */
-
-void target_create_inferior (char *exec_file, char *args,
- char **env, int from_tty);
+extern void target_load (const char *arg, int from_tty);
/* Some targets (such as ttrace-based HPUX) don't allow us to request
notification of inferior events such as fork and vork immediately
int target_follow_fork (int follow_child, int detach_fork);
+/* Handle the target-specific bookkeeping required when the inferior
+ makes an exec call. INF is the exec'd inferior. */
+
+void target_follow_exec (struct inferior *inf, char *execd_pathname);
+
/* On some targets, we can catch an inferior exec event when it
occurs. These functions insert/remove an already-created
catchpoint for such events. They return 0 for success, 1 if the
be defined by those targets that require the debugger to perform
cleanup or internal state changes in response to the process event. */
-/* The inferior process has died. Do what is right. */
-
-void target_mourn_inferior (void);
+/* For target_mourn_inferior see target/target.h. */
/* Does target have enough data to do a run or attach command? */
extern int target_thread_alive (ptid_t ptid);
-/* Query for new threads and add them to the thread list. */
+/* Sync the target's threads with GDB's thread list. */
-extern void target_find_new_threads (void);
+extern void target_update_thread_list (void);
/* Make target stop in a continuable fashion. (For instance, under
- Unix, this should act like SIGSTOP). This function is normally
- used by GUIs to implement a stop button. */
+ Unix, this should act like SIGSTOP). Note that this function is
+ asynchronous: it does not wait for the target to become stopped
+ before returning. If this is the behavior you want please use
+ target_stop_and_wait. */
extern void target_stop (ptid_t ptid);
+/* Interrupt the target just like the user typed a ^C on the
+ inferior's controlling terminal. (For instance, under Unix, this
+ should act like SIGINT). This function is asynchronous. */
+
+extern void target_interrupt (ptid_t ptid);
+
+/* Pass a ^C, as determined to have been pressed by checking the quit
+ flag, to the target. Normally calls target_interrupt, but remote
+ targets may take the opportunity to detect the remote side is not
+ responding and offer to disconnect. */
+
+extern void target_pass_ctrlc (void);
+
+/* The default target_ops::to_pass_ctrlc implementation. Simply calls
+ target_interrupt. */
+extern void default_target_pass_ctrlc (struct target_ops *ops);
+
/* Send the specified COMMAND to the target's monitor
(shell,interpreter) for execution. The result of the query is
placed in OUTBUF. */
target is currently executing; for some targets, that's the same as
whether or not the target is capable of execution, but there are
also targets which can be current while not executing. In that
- case this will become true after target_create_inferior or
- target_attach. */
+ case this will become true after to_create_inferior or
+ to_attach. */
extern int target_has_execution_1 (ptid_t);
#define target_can_lock_scheduler \
(current_target.to_has_thread_control & tc_schedlock)
-/* Should the target enable async mode if it is supported? Temporary
- cludge until async mode is a strict superset of sync mode. */
+/* Controls whether async mode is permitted. */
extern int target_async_permitted;
/* Can the target support asynchronous execution? */
/* Is the target in asynchronous execution mode? */
#define target_is_async_p() (current_target.to_is_async_p (¤t_target))
-int target_supports_non_stop (void);
+/* Enables/disabled async target events. */
+extern void target_async (int enable);
-/* Put the target in async mode with the specified callback function. */
-#define target_async(CALLBACK,CONTEXT) \
- (current_target.to_async (¤t_target, (CALLBACK), (CONTEXT)))
+/* Enables/disables thread create and exit events. */
+extern void target_thread_events (int enable);
+
+/* Whether support for controlling the target backends always in
+ non-stop mode is enabled. */
+extern enum auto_boolean target_non_stop_enabled;
+
+/* Is the target in non-stop mode? Some targets control the inferior
+ in non-stop mode even with "set non-stop off". Always true if "set
+ non-stop" is on. */
+extern int target_is_non_stop_p (void);
#define target_execution_direction() \
(current_target.to_execution_direction (¤t_target))
#define target_extra_thread_info(TP) \
(current_target.to_extra_thread_info (¤t_target, TP))
-/* Return the thread's name. A NULL result means that the target
- could not determine this thread's name. */
+/* Return the thread's name, or NULL if the target is unable to determine it.
+ The returned value must not be freed by the caller. */
-extern char *target_thread_name (struct thread_info *);
+extern const char *target_thread_name (struct thread_info *);
/* Attempts to find the pathname of the executable file
that was run to create a specified process.
#define target_stopped_by_watchpoint() \
((*current_target.to_stopped_by_watchpoint) (¤t_target))
+/* Returns non-zero if the target stopped because it executed a
+ software breakpoint instruction. */
+
+#define target_stopped_by_sw_breakpoint() \
+ ((*current_target.to_stopped_by_sw_breakpoint) (¤t_target))
+
+#define target_supports_stopped_by_sw_breakpoint() \
+ ((*current_target.to_supports_stopped_by_sw_breakpoint) (¤t_target))
+
+#define target_stopped_by_hw_breakpoint() \
+ ((*current_target.to_stopped_by_hw_breakpoint) (¤t_target))
+
+#define target_supports_stopped_by_hw_breakpoint() \
+ ((*current_target.to_supports_stopped_by_hw_breakpoint) (¤t_target))
+
/* Non-zero if we have steppable watchpoints */
#define target_have_steppable_watchpoint \
/* If the *_hw_beakpoint functions have not been defined
elsewhere use the definitions in the target vector. */
-/* Returns non-zero if we can set a hardware watchpoint of type TYPE. TYPE is
- one of bp_hardware_watchpoint, bp_read_watchpoint, bp_write_watchpoint, or
- bp_hardware_breakpoint. CNT is the number of such watchpoints used so far
- (including this one?). OTHERTYPE is who knows what... */
+/* Returns positive if we can set a hardware watchpoint of type TYPE.
+ Returns negative if the target doesn't have enough hardware debug
+ registers available. Return zero if hardware watchpoint of type
+ TYPE isn't supported. TYPE is one of bp_hardware_watchpoint,
+ bp_read_watchpoint, bp_write_watchpoint, or bp_hardware_breakpoint.
+ CNT is the number of such watchpoints used so far, including this
+ one. OTHERTYPE is the number of watchpoints of other types than
+ this one used so far. */
#define target_can_use_hardware_watchpoint(TYPE,CNT,OTHERTYPE) \
(*current_target.to_can_use_hw_breakpoint) (¤t_target, \
- TYPE, CNT, OTHERTYPE);
+ TYPE, CNT, OTHERTYPE)
/* Returns the number of debug registers needed to watch the given
memory region, or zero if not supported. */
addr, len)
+#define target_can_do_single_step() \
+ (*current_target.to_can_do_single_step) (¤t_target)
+
/* Set/clear a hardware watchpoint starting at ADDR, for LEN bytes.
TYPE is 0 for write, 1 for read, and 2 for read/write accesses.
COND is the expression for its condition, or NULL if there's none.
or hw_access for an access watchpoint. Returns 0 for success, 1 if
masked watchpoints are not supported, -1 for failure. */
-extern int target_insert_mask_watchpoint (CORE_ADDR, CORE_ADDR, int);
+extern int target_insert_mask_watchpoint (CORE_ADDR, CORE_ADDR,
+ enum target_hw_bp_type);
/* Remove a masked watchpoint at ADDR with the mask MASK.
RW may be hw_read for a read watchpoint, hw_write for a write watchpoint
or hw_access for an access watchpoint. Returns 0 for success, non-zero
for failure. */
-extern int target_remove_mask_watchpoint (CORE_ADDR, CORE_ADDR, int);
+extern int target_remove_mask_watchpoint (CORE_ADDR, CORE_ADDR,
+ enum target_hw_bp_type);
/* Insert a hardware breakpoint at address BP_TGT->placed_address in
the target machine. Returns 0 for success, and returns non-zero or
target_stopped_by_watchpoint, in such case place it to *ADDR_P. Only the
INFERIOR_PTID task is being queried. */
#define target_stopped_data_address(target, addr_p) \
- (*target.to_stopped_data_address) (target, addr_p)
+ (*(target)->to_stopped_data_address) (target, addr_p)
/* Return non-zero if ADDR is within the range of a watchpoint spanning
LENGTH bytes beginning at START. */
#define target_watchpoint_addr_within_range(target, addr, start, length) \
- (*target.to_watchpoint_addr_within_range) (target, addr, start, length)
+ (*(target)->to_watchpoint_addr_within_range) (target, addr, start, length)
/* Return non-zero if the target is capable of using hardware to evaluate
the condition expression. In this case, if the condition is false when
/* Target file operations. */
-/* Open FILENAME on the target, using FLAGS and MODE. Return a
- target file descriptor, or -1 if an error occurs (and set
- *TARGET_ERRNO). */
-extern int target_fileio_open (const char *filename, int flags, int mode,
- int *target_errno);
+/* Return nonzero if the filesystem seen by the current inferior
+ is the local filesystem, zero otherwise. */
+#define target_filesystem_is_local() \
+ current_target.to_filesystem_is_local (¤t_target)
+
+/* Open FILENAME on the target, in the filesystem as seen by INF,
+ using FLAGS and MODE. If INF is NULL, use the filesystem seen
+ by the debugger (GDB or, for remote targets, the remote stub).
+ Return a target file descriptor, or -1 if an error occurs (and
+ set *TARGET_ERRNO). */
+extern int target_fileio_open (struct inferior *inf,
+ const char *filename, int flags,
+ int mode, int *target_errno);
+
+/* Like target_fileio_open, but print a warning message if the
+ file is being accessed over a link that may be slow. */
+extern int target_fileio_open_warn_if_slow (struct inferior *inf,
+ const char *filename,
+ int flags,
+ int mode,
+ int *target_errno);
/* Write up to LEN bytes from WRITE_BUF to FD on the target.
Return the number of bytes written, or -1 if an error occurs
extern int target_fileio_pread (int fd, gdb_byte *read_buf, int len,
ULONGEST offset, int *target_errno);
+/* Get information about the file opened as FD on the target
+ and put it in SB. Return 0 on success, or -1 if an error
+ occurs (and set *TARGET_ERRNO). */
+extern int target_fileio_fstat (int fd, struct stat *sb,
+ int *target_errno);
+
/* Close FD on the target. Return 0, or -1 if an error occurs
(and set *TARGET_ERRNO). */
extern int target_fileio_close (int fd, int *target_errno);
-/* Unlink FILENAME on the target. Return 0, or -1 if an error
+/* Unlink FILENAME on the target, in the filesystem as seen by INF.
+ If INF is NULL, use the filesystem seen by the debugger (GDB or,
+ for remote targets, the remote stub). Return 0, or -1 if an error
occurs (and set *TARGET_ERRNO). */
-extern int target_fileio_unlink (const char *filename, int *target_errno);
-
-/* Read value of symbolic link FILENAME on the target. Return a
- null-terminated string allocated via xmalloc, or NULL if an error
- occurs (and set *TARGET_ERRNO). */
-extern char *target_fileio_readlink (const char *filename, int *target_errno);
-
-/* Read target file FILENAME. The return value will be -1 if the transfer
- fails or is not supported; 0 if the object is empty; or the length
- of the object otherwise. If a positive value is returned, a
- sufficiently large buffer will be allocated using xmalloc and
- returned in *BUF_P containing the contents of the object.
+extern int target_fileio_unlink (struct inferior *inf,
+ const char *filename,
+ int *target_errno);
+
+/* Read value of symbolic link FILENAME on the target, in the
+ filesystem as seen by INF. If INF is NULL, use the filesystem seen
+ by the debugger (GDB or, for remote targets, the remote stub).
+ Return a null-terminated string allocated via xmalloc, or NULL if
+ an error occurs (and set *TARGET_ERRNO). */
+extern char *target_fileio_readlink (struct inferior *inf,
+ const char *filename,
+ int *target_errno);
+
+/* Read target file FILENAME, in the filesystem as seen by INF. If
+ INF is NULL, use the filesystem seen by the debugger (GDB or, for
+ remote targets, the remote stub). The return value will be -1 if
+ the transfer fails or is not supported; 0 if the object is empty;
+ or the length of the object otherwise. If a positive value is
+ returned, a sufficiently large buffer will be allocated using
+ xmalloc and returned in *BUF_P containing the contents of the
+ object.
This method should be used for objects sufficiently small to store
in a single xmalloc'd buffer, when no fixed bound on the object's
size is known in advance. */
-extern LONGEST target_fileio_read_alloc (const char *filename,
+extern LONGEST target_fileio_read_alloc (struct inferior *inf,
+ const char *filename,
gdb_byte **buf_p);
-/* Read target file FILENAME. The result is NUL-terminated and
+/* Read target file FILENAME, in the filesystem as seen by INF. If
+ INF is NULL, use the filesystem seen by the debugger (GDB or, for
+ remote targets, the remote stub). The result is NUL-terminated and
returned as a string, allocated using xmalloc. If an error occurs
or the transfer is unsupported, NULL is returned. Empty objects
are returned as allocated but empty strings. A warning is issued
if the result contains any embedded NUL bytes. */
-extern char *target_fileio_read_stralloc (const char *filename);
+extern char *target_fileio_read_stralloc (struct inferior *inf,
+ const char *filename);
/* Tracepoint-related operations. */
/* See to_get_tailcall_unwinder in struct target_ops. */
extern const struct frame_unwind *target_get_tailcall_unwinder (void);
+/* This implements basic memory verification, reading target memory
+ and performing the comparison here (as opposed to accelerated
+ verification making use of the qCRC packet, for example). */
+
+extern int simple_verify_memory (struct target_ops* ops,
+ const gdb_byte *data,
+ CORE_ADDR memaddr, ULONGEST size);
+
/* Verify that the memory in the [MEMADDR, MEMADDR+SIZE) range matches
the contents of [DATA,DATA+SIZE). Returns 1 if there's a match, 0
if there's a mismatch, and -1 if an error is encountered while
/* Routines for maintenance of the target structures...
complete_target_initialization: Finalize a target_ops by filling in
- any fields needed by the target implementation.
+ any fields needed by the target implementation. Unnecessary for
+ targets which are registered via add_target, as this part gets
+ taken care of then.
add_target: Add a target to the list of all possible targets.
+ This only makes sense for targets that should be activated using
+ the "target TARGET_NAME ..." command.
push_target: Make this target the top of the stack of currently used
targets, within its particular stratum of the stack. Result
/* Does whatever cleanup is required to get rid of all pushed targets. */
extern void pop_all_targets (void);
+/* Like pop_all_targets, but pops only targets whose stratum is at or
+ above STRATUM. */
+extern void pop_all_targets_at_and_above (enum strata stratum);
+
/* Like pop_all_targets, but pops only targets whose stratum is
strictly above ABOVE_STRATUM. */
extern void pop_all_targets_above (enum strata above_stratum);
/* From mem-break.c */
extern int memory_remove_breakpoint (struct target_ops *, struct gdbarch *,
- struct bp_target_info *);
+ struct bp_target_info *,
+ enum remove_bp_reason);
extern int memory_insert_breakpoint (struct target_ops *, struct gdbarch *,
struct bp_target_info *);
+/* Check whether the memory at the breakpoint's placed address still
+ contains the expected breakpoint instruction. */
+
+extern int memory_validate_breakpoint (struct gdbarch *gdbarch,
+ struct bp_target_info *bp_tgt);
+
extern int default_memory_remove_breakpoint (struct gdbarch *,
struct bp_target_info *);
extern void target_require_runnable (void);
-extern void find_default_attach (struct target_ops *, char *, int);
-
-extern void find_default_create_inferior (struct target_ops *,
- char *, char *, char **, int);
-
extern struct target_ops *find_target_beneath (struct target_ops *);
/* Find the target at STRATUM. If no target is at that stratum,
/* Speed in bits per second, or -1 which means don't mess with the speed. */
extern int baud_rate;
+
+/* Parity for serial port */
+extern int serial_parity;
+
/* Timeout limit for response from target. */
extern int remote_timeout;
\f
/* Imported from machine dependent code. */
-/* Blank target vector entries are initialized to target_ignore. */
-void target_ignore (void);
-
/* See to_supports_btrace in struct target_ops. */
-#define target_supports_btrace() \
- (current_target.to_supports_btrace (¤t_target))
+extern int target_supports_btrace (enum btrace_format);
/* See to_enable_btrace in struct target_ops. */
-extern struct btrace_target_info *target_enable_btrace (ptid_t ptid);
+extern struct btrace_target_info *
+ target_enable_btrace (ptid_t ptid, const struct btrace_config *);
/* See to_disable_btrace in struct target_ops. */
extern void target_disable_btrace (struct btrace_target_info *btinfo);
extern void target_teardown_btrace (struct btrace_target_info *btinfo);
/* See to_read_btrace in struct target_ops. */
-extern enum btrace_error target_read_btrace (VEC (btrace_block_s) **,
+extern enum btrace_error target_read_btrace (struct btrace_data *,
struct btrace_target_info *,
enum btrace_read_type);
+/* See to_btrace_conf in struct target_ops. */
+extern const struct btrace_config *
+ target_btrace_conf (const struct btrace_target_info *);
+
/* See to_stop_recording in struct target_ops. */
extern void target_stop_recording (void);
-/* See to_info_record in struct target_ops. */
-extern void target_info_record (void);
-
/* See to_save_record in struct target_ops. */
extern void target_save_record (const char *filename);
extern void target_delete_record (void);
/* See to_record_is_replaying in struct target_ops. */
-extern int target_record_is_replaying (void);
+extern int target_record_is_replaying (ptid_t ptid);
+
+/* See to_record_will_replay in struct target_ops. */
+extern int target_record_will_replay (ptid_t ptid, int dir);
+
+/* See to_record_stop_replaying in struct target_ops. */
+extern void target_record_stop_replaying (void);
/* See to_goto_record_begin in struct target_ops. */
extern void target_goto_record_begin (void);
/* See to_call_history_range. */
extern void target_call_history_range (ULONGEST begin, ULONGEST end, int flags);
-/* See to_decr_pc_after_break. Start searching for the target at OPS. */
-extern CORE_ADDR forward_target_decr_pc_after_break (struct target_ops *ops,
- struct gdbarch *gdbarch);
+/* See to_prepare_to_generate_core. */
+extern void target_prepare_to_generate_core (void);
-/* See to_decr_pc_after_break. */
-extern CORE_ADDR target_decr_pc_after_break (struct gdbarch *gdbarch);
+/* See to_done_generating_core. */
+extern void target_done_generating_core (void);
#endif /* !defined (TARGET_H) */