/* Interface between GDB and target environments, including files and processes
- Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
- 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+ Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+ 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Free Software Foundation, Inc.
Contributed by Cygnus Support. Written by John Gilmore.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor,
- Boston, MA 02110-1301, USA. */
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
#if !defined (TARGET_H)
#define TARGET_H
struct mem_attrib;
struct target_ops;
struct bp_target_info;
+struct regcache;
/* This include file defines the interface between the main part
of the debugger, and the part which is target-specific, or
#include "symtab.h"
#include "dcache.h"
#include "memattr.h"
+#include "vec.h"
enum strata
{
{
/* AVR target specific transfer. See "avr-tdep.c" and "remote.c". */
TARGET_OBJECT_AVR,
+ /* SPU target specific transfer. See "spu-tdep.c". */
+ TARGET_OBJECT_SPU,
/* Transfer up-to LEN bytes of memory starting at OFFSET. */
TARGET_OBJECT_MEMORY,
+ /* Memory, avoiding GDB's data cache and trusting the executable.
+ Target implementations of to_xfer_partial never need to handle
+ this object, and most callers should not use it. */
+ TARGET_OBJECT_RAW_MEMORY,
/* Kernel Unwind Table. See "ia64-tdep.c". */
TARGET_OBJECT_UNWIND_TABLE,
/* Transfer auxilliary vector. */
TARGET_OBJECT_AUXV,
/* StackGhost cookie. See "sparc-tdep.c". */
- TARGET_OBJECT_WCOOKIE
-
+ TARGET_OBJECT_WCOOKIE,
+ /* Target memory map in XML format. */
+ TARGET_OBJECT_MEMORY_MAP,
+ /* Flash memory. This object can be used to write contents to
+ a previously erased flash memory. Using it without erasing
+ flash can have unexpected results. Addresses are physical
+ address on target, and not relative to flash start. */
+ TARGET_OBJECT_FLASH,
+ /* Available target-specific features, e.g. registers and coprocessors.
+ See "target-descriptions.c". ANNEX should never be empty. */
+ TARGET_OBJECT_AVAILABLE_FEATURES,
+ /* Currently loaded libraries, in XML format. */
+ TARGET_OBJECT_LIBRARIES
/* Possible future objects: TARGET_OBJECT_FILE, TARGET_OBJECT_PROC, ... */
};
const char *annex, const gdb_byte *buf,
ULONGEST offset, LONGEST len);
+/* Similar to target_write, except that it also calls PROGRESS with
+ the number of bytes written and the opaque BATON after every
+ successful partial write (and before the first write). This is
+ useful for progress reporting and user interaction while writing
+ data. To abort the transfer, the progress callback can throw an
+ exception. */
+
+LONGEST target_write_with_progress (struct target_ops *ops,
+ enum target_object object,
+ const char *annex, const gdb_byte *buf,
+ ULONGEST offset, LONGEST len,
+ void (*progress) (ULONGEST, void *),
+ void *baton);
+
/* Wrapper to perform a full read of unknown size. OBJECT/ANNEX will
be read using OPS. The return value will be -1 if the transfer
fails or is not supported; 0 if the object is empty; or the length
enum target_object object,
const char *annex, gdb_byte **buf_p);
+/* Read OBJECT/ANNEX using OPS. The result is NUL-terminated and
+ returned as a string, allocated using xmalloc. If an error occurs
+ or the transfer is unsupported, NULL is returned. Empty objects
+ are returned as allocated but empty strings. A warning is issued
+ if the result contains any embedded NUL bytes. */
+
+extern char *target_read_stralloc (struct target_ops *ops,
+ enum target_object object,
+ const char *annex);
+
/* Wrappers to target read/write that perform memory transfers. They
throw an error if the memory transfer fails.
void (*to_disconnect) (struct target_ops *, char *, int);
void (*to_resume) (ptid_t, int, enum target_signal);
ptid_t (*to_wait) (ptid_t, struct target_waitstatus *);
- void (*to_fetch_registers) (int);
- void (*to_store_registers) (int);
- void (*to_prepare_to_store) (void);
+ void (*to_fetch_registers) (struct regcache *, int);
+ void (*to_store_registers) (struct regcache *, int);
+ void (*to_prepare_to_store) (struct regcache *);
/* Transfer LEN bytes of memory between GDB address MYADDR and
target address MEMADDR. If WRITE, transfer them to the target, else
int (*to_remove_watchpoint) (CORE_ADDR, int, int);
int (*to_insert_watchpoint) (CORE_ADDR, int, int);
int (*to_stopped_by_watchpoint) (void);
+ int to_have_steppable_watchpoint;
int to_have_continuable_watchpoint;
int (*to_stopped_data_address) (struct target_ops *, CORE_ADDR *);
int (*to_region_ok_for_hw_watchpoint) (CORE_ADDR, int);
char *(*to_extra_thread_info) (struct thread_info *);
void (*to_stop) (void);
void (*to_rcmd) (char *command, struct ui_file *output);
- struct symtab_and_line *(*to_enable_exception_callback) (enum
- exception_event_kind,
- int);
- struct exception_event_record *(*to_get_current_exception_event) (void);
char *(*to_pid_to_exec_file) (int pid);
+ void (*to_log_command) (const char *);
enum strata to_stratum;
int to_has_all_memory;
int to_has_memory;
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, LONGEST len);
+ /* Returns the memory map for the target. A return value of NULL
+ means that no memory map is available. If a memory address
+ does not fall within any returned regions, it's assumed to be
+ RAM. The returned memory regions should not overlap.
+
+ The order of regions does not matter; target_memory_map will
+ sort regions by starting address. For that reason, this
+ function should not be called directly except via
+ target_memory_map.
+
+ This method should not cache data; if the memory map could
+ change unexpectedly, it should be invalidated, and higher
+ layers will re-fetch it. */
+ VEC(mem_region_s) *(*to_memory_map) (struct target_ops *);
+
+ /* Erases the region of flash memory starting at ADDRESS, of
+ length LENGTH.
+
+ Precondition: both ADDRESS and ADDRESS+LENGTH should be aligned
+ on flash block boundaries, as reported by 'to_memory_map'. */
+ void (*to_flash_erase) (struct target_ops *,
+ ULONGEST address, LONGEST length);
+
+ /* Finishes a flash memory write sequence. After this operation
+ all flash memory should be available for writing and the result
+ of reading from areas written by 'to_flash_write' should be
+ equal to what was written. */
+ void (*to_flash_done) (struct target_ops *);
+
+ /* Describe the architecture-specific features of this target.
+ Returns the description found, or NULL if no description
+ was available. */
+ const struct target_desc *(*to_read_description) (struct target_ops *ops);
+
int to_magic;
/* Need sub-structure for target machine related rather than comm related?
*/
/* Fetch at least register REGNO, or all regs if regno == -1. No result. */
-#define target_fetch_registers(regno) \
- (*current_target.to_fetch_registers) (regno)
+#define target_fetch_registers(regcache, regno) \
+ (*current_target.to_fetch_registers) (regcache, regno)
/* Store at least register REGNO, or all regs if REGNO == -1.
It can store as many registers as it wants to, so target_prepare_to_store
must have been previously called. Calls error() if there are problems. */
-#define target_store_registers(regs) \
- (*current_target.to_store_registers) (regs)
+#define target_store_registers(regcache, regs) \
+ (*current_target.to_store_registers) (regcache, regs)
/* Get ready to modify the registers array. On machines which store
individual registers, this doesn't need to do anything. On machines
that REGISTERS contains all the registers from the program being
debugged. */
-#define target_prepare_to_store() \
- (*current_target.to_prepare_to_store) ()
+#define target_prepare_to_store(regcache) \
+ (*current_target.to_prepare_to_store) (regcache)
extern DCACHE *target_dcache;
-extern int do_xfer_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len,
- int write, struct mem_attrib *attrib);
-
extern int target_read_string (CORE_ADDR, char **, int, int *);
extern int target_read_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len);
extern int xfer_memory (CORE_ADDR, gdb_byte *, int, int,
struct mem_attrib *, struct target_ops *);
-extern int child_xfer_memory (CORE_ADDR, gdb_byte *, int, int,
- struct mem_attrib *, struct target_ops *);
-
-/* Make a single attempt at transfering LEN bytes. On a successful
- transfer, the number of bytes actually transfered is returned and
- ERR is set to 0. When a transfer fails, -1 is returned (the number
- of bytes actually transfered is not defined) and ERR is set to a
- non-zero error indication. */
-
-extern int target_read_memory_partial (CORE_ADDR addr, gdb_byte *buf,
- int len, int *err);
-
-extern int target_write_memory_partial (CORE_ADDR addr, gdb_byte *buf,
- int len, int *err);
-
-extern char *child_pid_to_exec_file (int);
-
-extern char *child_core_file_to_sym_file (char *);
-
-#if defined(CHILD_POST_ATTACH)
-extern void child_post_attach (int);
-#endif
-
-extern void child_post_startup_inferior (ptid_t);
-
-extern void child_acknowledge_created_inferior (int);
-
-extern void child_insert_fork_catchpoint (int);
-
-extern int child_remove_fork_catchpoint (int);
-
-extern void child_insert_vfork_catchpoint (int);
+/* Fetches the target's memory map. If one is found it is sorted
+ and returned, after some consistency checking. Otherwise, NULL
+ is returned. */
+VEC(mem_region_s) *target_memory_map (void);
-extern int child_remove_vfork_catchpoint (int);
+/* Erase the specified flash region. */
+void target_flash_erase (ULONGEST address, LONGEST length);
-extern void child_acknowledge_created_inferior (int);
+/* Finish a sequence of flash operations. */
+void target_flash_done (void);
-extern int child_follow_fork (struct target_ops *, int);
+/* Describes a request for a memory write operation. */
+struct memory_write_request
+ {
+ /* Begining address that must be written. */
+ ULONGEST begin;
+ /* Past-the-end address. */
+ ULONGEST end;
+ /* The data to write. */
+ gdb_byte *data;
+ /* A callback baton for progress reporting for this request. */
+ void *baton;
+ };
+typedef struct memory_write_request memory_write_request_s;
+DEF_VEC_O(memory_write_request_s);
-extern void child_insert_exec_catchpoint (int);
+/* Enumeration specifying different flash preservation behaviour. */
+enum flash_preserve_mode
+ {
+ flash_preserve,
+ flash_discard
+ };
-extern int child_remove_exec_catchpoint (int);
+/* Write several memory blocks at once. This version can be more
+ efficient than making several calls to target_write_memory, in
+ particular because it can optimize accesses to flash memory.
-extern int child_reported_exec_events_per_exec_call (void);
+ Moreover, this is currently the only memory access function in gdb
+ that supports writing to flash memory, and it should be used for
+ all cases where access to flash memory is desirable.
-extern int child_has_exited (int, int, int *);
+ REQUESTS is the vector (see vec.h) of memory_write_request.
+ PRESERVE_FLASH_P indicates what to do with blocks which must be
+ erased, but not completely rewritten.
+ PROGRESS_CB is a function that will be periodically called to provide
+ feedback to user. It will be called with the baton corresponding
+ to the request currently being written. It may also be called
+ with a NULL baton, when preserved flash sectors are being rewritten.
-extern int child_thread_alive (ptid_t);
+ The function returns 0 on success, and error otherwise. */
+int target_write_memory_blocks (VEC(memory_write_request_s) *requests,
+ enum flash_preserve_mode preserve_flash_p,
+ void (*progress_cb) (ULONGEST, void *));
/* From infrun.c. */
/* Query for new threads and add them to the thread list. */
#define target_find_new_threads() \
- (*current_target.to_find_new_threads) (); \
+ (*current_target.to_find_new_threads) ()
/* Make target stop in a continuable fashion. (For instance, under
Unix, this should act like SIGSTOP). This function is normally
(*current_target.to_rcmd) (command, outbuf)
-/* Get the symbol information for a breakpointable routine called when
- an exception event occurs.
- Intended mainly for C++, and for those
- platforms/implementations where such a callback mechanism is available,
- e.g. HP-UX with ANSI C++ (aCC). Some compilers (e.g. g++) support
- different mechanisms for debugging exceptions. */
-
-#define target_enable_exception_callback(kind, enable) \
- (*current_target.to_enable_exception_callback) (kind, enable)
-
-/* Get the current exception event kind -- throw or catch, etc. */
-
-#define target_get_current_exception_event() \
- (*current_target.to_get_current_exception_event) ()
-
/* Does the target include all of memory, or only part of it? This
determines whether we look up the target chain for other parts of
memory if this target can't satisfy a request. */
(current_target.to_has_registers)
/* Does the target have execution? Can we make it jump (through
- hoops), or pop its stack a few times? FIXME: If this is to work that
- way, it needs to check whether an inferior actually exists.
- remote-udi.c and probably other targets can be the current target
- when the inferior doesn't actually exist at the moment. Right now
- this just tells us whether this target is *capable* of execution. */
+ hoops), or pop its stack a few times? This means that the current
+ target is currently executing; for some targets, that's the same as
+ whether or not the target is capable of execution, but there are
+ also targets which can be current while not executing. In that
+ case this will become true after target_create_inferior or
+ target_attach. */
#define target_has_execution \
(current_target.to_has_execution)
#define target_extra_thread_info(TP) \
(current_target.to_extra_thread_info (TP))
-/*
- * New Objfile Event Hook:
- *
- * Sometimes a GDB component wants to get notified whenever a new
- * objfile is loaded. Mainly this is used by thread-debugging
- * implementations that need to know when symbols for the target
- * thread implemenation are available.
- *
- * The old way of doing this is to define a macro 'target_new_objfile'
- * that points to the function that you want to be called on every
- * objfile/shlib load.
-
- The new way is to grab the function pointer,
- 'deprecated_target_new_objfile_hook', and point it to the function
- that you want to be called on every objfile/shlib load.
-
- If multiple clients are willing to be cooperative, they can each
- save a pointer to the previous value of
- deprecated_target_new_objfile_hook before modifying it, and arrange
- for their function to call the previous function in the chain. In
- that way, multiple clients can receive this notification (something
- like with signal handlers). */
-
-extern void (*deprecated_target_new_objfile_hook) (struct objfile *);
-
-#ifndef target_pid_or_tid_to_str
-#define target_pid_or_tid_to_str(ID) \
- target_pid_to_str (ID)
-#endif
-
/* Attempts to find the pathname of the executable file
that was run to create a specified process.
#define target_get_thread_local_address_p() \
(target_get_thread_local_address != NULL)
-/* Hook to call target dependent code just after inferior target process has
- started. */
-
-#ifndef TARGET_CREATE_INFERIOR_HOOK
-#define TARGET_CREATE_INFERIOR_HOOK(PID)
-#endif
/* Hardware watchpoint interfaces. */
(*current_target.to_stopped_by_watchpoint) ()
#endif
+/* Non-zero if we have steppable watchpoints */
+
+#ifndef HAVE_STEPPABLE_WATCHPOINT
+#define HAVE_STEPPABLE_WATCHPOINT \
+ (current_target.to_have_steppable_watchpoint)
+#endif
+
/* Non-zero if we have continuable watchpoints */
#ifndef HAVE_CONTINUABLE_WATCHPOINT
#define target_stopped_data_address_p(CURRENT_TARGET) (1)
#endif
-/* This will only be defined by a target that supports catching vfork events,
- such as HP-UX.
-
- On some targets (such as HP-UX 10.20 and earlier), resuming a newly vforked
- child process after it has exec'd, causes the parent process to resume as
- well. To prevent the parent from running spontaneously, such targets should
- define this to a function that prevents that from happening. */
-#if !defined(ENSURE_VFORKING_PARENT_REMAINS_STOPPED)
-#define ENSURE_VFORKING_PARENT_REMAINS_STOPPED(PID) (0)
-#endif
-
-/* This will only be defined by a target that supports catching vfork events,
- such as HP-UX.
+extern const struct target_desc *target_read_description (struct target_ops *);
- On some targets (such as HP-UX 10.20 and earlier), a newly vforked child
- process must be resumed when it delivers its exec event, before the parent
- vfork event will be delivered to us. */
+/* Command logging facility. */
-#if !defined(RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK)
-#define RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK() (0)
-#endif
+#define target_log_command(p) \
+ do \
+ if (current_target.to_log_command) \
+ (*current_target.to_log_command) (p); \
+ while (0)
/* Routines for maintenance of the target structures...
extern int unpush_target (struct target_ops *);
+extern void target_pre_inferior (int);
+
extern void target_preopen (int);
extern void pop_target (void);
+extern CORE_ADDR target_translate_tls_address (struct objfile *objfile,
+ CORE_ADDR offset);
+
+/* Mark a pushed target as running or exited, for targets which do not
+ automatically pop when not active. */
+
+void target_mark_running (struct target_ops *);
+
+void target_mark_exited (struct target_ops *);
+
/* Struct section_table maps address ranges to file sections. It is
mostly used with BFD files, but can be used without (e.g. for handling
raw disks, or files not in formats handled by BFD). */