/* Interface between GDB and target environments, including files and processes
- Copyright 1990, 1991, 1992 Free Software Foundation, Inc.
+ Copyright 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
Contributed by Cygnus Support. Written by John Gilmore.
This file is part of GDB.
process_stratum /* Executing processes */
};
+/* Stuff for target_wait. */
+
+/* Generally, what has the program done? */
+enum target_waitkind {
+ /* The program has exited. The exit status is in value.integer. */
+ TARGET_WAITKIND_EXITED,
+
+ /* The program has stopped with a signal. Which signal is in value.sig. */
+ TARGET_WAITKIND_STOPPED,
+
+ /* The program has terminated with a signal. Which signal is in
+ value.sig. */
+ TARGET_WAITKIND_SIGNALLED,
+
+ /* The program is letting us know that it dynamically loaded something
+ (e.g. it called load(2) on AIX). */
+ TARGET_WAITKIND_LOADED,
+
+ /* Nothing happened, but we stopped anyway. This perhaps should be handled
+ within target_wait, but I'm not sure target_wait should be resuming the
+ inferior. */
+ TARGET_WAITKIND_SPURIOUS
+ };
+
+/* The numbering of these signals is chosen to match traditional unix
+ signals (insofar as various unices use the same numbers, anyway).
+ It is also the numbering of the GDB remote protocol. Other remote
+ protocols, if they use a different numbering, should make sure to
+ translate appropriately. */
+
+/* This is based strongly on Unix/POSIX signals for several reasons:
+ (1) This set of signals represents a widely-accepted attempt to
+ represent events of this sort in a portable fashion, (2) we want a
+ signal to make it from wait to child_wait to the user intact, (3) many
+ remote protocols use a similar encoding. However, it is
+ recognized that this set of signals has limitations (such as not
+ distinguishing between various kinds of SIGSEGV, or not
+ distinguishing hitting a breakpoint from finishing a single step).
+ So in the future we may get around this either by adding additional
+ signals for breakpoint, single-step, etc., or by adding signal
+ codes; the latter seems more in the spirit of what BSD, System V,
+ etc. are doing to address these issues. */
+
+/* For an explanation of what each signal means, see
+ target_signal_to_string. */
+
+enum target_signal {
+ /* Used some places (e.g. stop_signal) to record the concept that
+ there is no signal. */
+ TARGET_SIGNAL_0 = 0,
+ TARGET_SIGNAL_FIRST = 0,
+ TARGET_SIGNAL_HUP = 1,
+ TARGET_SIGNAL_INT = 2,
+ TARGET_SIGNAL_QUIT = 3,
+ TARGET_SIGNAL_ILL = 4,
+ TARGET_SIGNAL_TRAP = 5,
+ TARGET_SIGNAL_ABRT = 6,
+ TARGET_SIGNAL_EMT = 7,
+ TARGET_SIGNAL_FPE = 8,
+ TARGET_SIGNAL_KILL = 9,
+ TARGET_SIGNAL_BUS = 10,
+ TARGET_SIGNAL_SEGV = 11,
+ TARGET_SIGNAL_SYS = 12,
+ TARGET_SIGNAL_PIPE = 13,
+ TARGET_SIGNAL_ALRM = 14,
+ TARGET_SIGNAL_TERM = 15,
+ TARGET_SIGNAL_URG = 16,
+ TARGET_SIGNAL_STOP = 17,
+ TARGET_SIGNAL_TSTP = 18,
+ TARGET_SIGNAL_CONT = 19,
+ TARGET_SIGNAL_CHLD = 20,
+ TARGET_SIGNAL_TTIN = 21,
+ TARGET_SIGNAL_TTOU = 22,
+ TARGET_SIGNAL_IO = 23,
+ TARGET_SIGNAL_XCPU = 24,
+ TARGET_SIGNAL_XFSZ = 25,
+ TARGET_SIGNAL_VTALRM = 26,
+ TARGET_SIGNAL_PROF = 27,
+ TARGET_SIGNAL_WINCH = 28,
+ TARGET_SIGNAL_LOST = 29,
+ TARGET_SIGNAL_USR1 = 30,
+ TARGET_SIGNAL_USR2 = 31,
+ TARGET_SIGNAL_PWR = 32,
+ /* Similar to SIGIO. Perhaps they should have the same number. */
+ TARGET_SIGNAL_POLL = 33,
+ TARGET_SIGNAL_WIND = 34,
+ TARGET_SIGNAL_PHONE = 35,
+ TARGET_SIGNAL_WAITING = 36,
+ TARGET_SIGNAL_LWP = 37,
+ TARGET_SIGNAL_DANGER = 38,
+ TARGET_SIGNAL_GRANT = 39,
+ TARGET_SIGNAL_RETRACT = 40,
+ TARGET_SIGNAL_MSG = 41,
+ TARGET_SIGNAL_SOUND = 42,
+ TARGET_SIGNAL_SAK = 43,
+
+ /* Some signal we don't know about. */
+ TARGET_SIGNAL_UNKNOWN,
+
+ /* Use whatever signal we use when one is not specifically specified
+ (for passing to proceed and so on). */
+ TARGET_SIGNAL_DEFAULT,
+
+ /* Last and unused enum value, for sizing arrays, etc. */
+ TARGET_SIGNAL_LAST
+};
+
+struct target_waitstatus {
+ enum target_waitkind kind;
+
+ /* Exit status or signal number. */
+ union {
+ int integer;
+ enum target_signal sig;
+ } value;
+};
+
+/* Return the string for a signal. */
+extern char *target_signal_to_string PARAMS ((enum target_signal));
+
+/* Return the name (SIGHUP, etc.) for a signal. */
+extern char *target_signal_to_name PARAMS ((enum target_signal));
+
+/* Given a name (SIGHUP, etc.), return its signal. */
+enum target_signal target_signal_from_name PARAMS ((char *));
+\f
struct target_ops
{
char *to_shortname; /* Name this target type */
void (*to_close) PARAMS ((int));
void (*to_attach) PARAMS ((char *, int));
void (*to_detach) PARAMS ((char *, int));
- void (*to_resume) PARAMS ((int, int));
- int (*to_wait) PARAMS ((int *));
+ void (*to_resume) PARAMS ((int, int, enum target_signal));
+ int (*to_wait) PARAMS ((int, struct target_waitstatus *));
void (*to_fetch_registers) PARAMS ((int));
void (*to_store_registers) PARAMS ((int));
void (*to_prepare_to_store) PARAMS ((void));
- int (*to_xfer_memory) PARAMS ((CORE_ADDR, char *, int, int,
- struct target_ops *));
+
+ /* Transfer LEN bytes of memory between GDB address MYADDR and
+ target address MEMADDR. If WRITE, transfer them to the target, else
+ transfer them from the target. TARGET is the target from which we
+ get this function.
+
+ Return value, N, is one of the following:
+
+ 0 means that we can't handle this. If errno has been set, it is the
+ error which prevented us from doing it (FIXME: What about bfd_error?).
+
+ positive (call it N) means that we have transferred N bytes
+ starting at MEMADDR. We might be able to handle more bytes
+ beyond this length, but no promises.
+
+ negative (call its absolute value N) means that we cannot
+ transfer right at MEMADDR, but we could transfer at least
+ something at MEMADDR + N. */
+
+ int (*to_xfer_memory) PARAMS ((CORE_ADDR memaddr, char *myaddr,
+ int len, int write,
+ struct target_ops * target));
+
+#if 0
+ /* Enable this after 4.12. */
+
+ /* Search target memory. Start at STARTADDR and take LEN bytes of
+ target memory, and them with MASK, and compare to DATA. If they
+ match, set *ADDR_FOUND to the address we found it at, store the data
+ we found at LEN bytes starting at DATA_FOUND, and return. If
+ not, add INCREMENT to the search address and keep trying until
+ the search address is outside of the range [LORANGE,HIRANGE).
+
+ If we don't find anything, set *ADDR_FOUND to (CORE_ADDR)0 and return. */
+ void (*to_search) PARAMS ((int len, char *data, char *mask,
+ CORE_ADDR startaddr, int increment,
+ CORE_ADDR lorange, CORE_ADDR hirange,
+ CORE_ADDR *addr_found, char *data_found));
+
+#define target_search(len, data, mask, startaddr, increment, lorange, hirange, addr_found, data_found) \
+ (*current_target->to_search) (len, data, mask, startaddr, increment, \
+ lorange, hirange, addr_found, data_found)
+#endif /* 0 */
+
void (*to_files_info) PARAMS ((struct target_ops *));
int (*to_insert_breakpoint) PARAMS ((CORE_ADDR, char *));
int (*to_remove_breakpoint) PARAMS ((CORE_ADDR, char *));
int (*to_lookup_symbol) PARAMS ((char *, CORE_ADDR *));
void (*to_create_inferior) PARAMS ((char *, char *, char **));
void (*to_mourn_inferior) PARAMS ((void));
+ int (*to_can_run) PARAMS ((void));
+ void (*to_notice_signals) PARAMS ((int pid));
enum strata to_stratum;
struct target_ops
*to_next;
#define OPS_MAGIC 3840
-/* The ops structure for our "current" target process. */
+/* The ops structure for our "current" target process. This should
+ never be NULL. If there is no target, it points to the dummy_target. */
extern struct target_ops *current_target;
#define target_close(quitting) \
(*current_target->to_close) (quitting)
-/* Attaches to a process on the target side. */
+/* Attaches to a process on the target side. Arguments are as passed
+ to the `attach' command by the user. This routine can be called
+ when the target is not on the target-stack, if the target_can_run
+ routine returns 1; in that case, it must push itself onto the stack.
+ Upon exit, the target should be ready for normal operations, and
+ should be ready to deliver the status of the process immediately
+ (without waiting) to an upcoming target_wait call. */
#define target_attach(args, from_tty) \
(*current_target->to_attach) (args, from_tty)
typed by the user (e.g. a signal to send the process). FROM_TTY
says whether to be verbose or not. */
-#define target_detach(args, from_tty) \
- (*current_target->to_detach) (args, from_tty)
+extern void
+target_detach PARAMS ((char *, int));
-/* Resume execution of the target process. STEP says whether to single-step
- or to run free; SIGGNAL is the signal value (e.g. SIGINT) to be given
- to the target, or zero for no signal. */
+/* Resume execution of the target process PID. STEP says whether to
+ single-step or to run free; SIGGNAL is the signal to be given to
+ the target, or TARGET_SIGNAL_0 for no signal. The caller may not
+ pass TARGET_SIGNAL_DEFAULT. */
-#define target_resume(step, siggnal) \
- (*current_target->to_resume) (step, siggnal)
+#define target_resume(pid, step, siggnal) \
+ (*current_target->to_resume) (pid, step, siggnal)
-/* Wait for inferior process to do something. Return pid of child,
- or -1 in case of error; store status through argument pointer STATUS. */
+/* Wait for process pid to do something. Pid = -1 to wait for any pid
+ to do something. Return pid of child, or -1 in case of error;
+ store status through argument pointer STATUS. Note that it is
+ *not* OK to return_to_top_level out of target_wait without popping
+ the debugging target from the stack; GDB isn't prepared to get back
+ to the prompt with a debugging target but without the frame cache,
+ stop_pc, etc., set up. */
-#define target_wait(status) \
- (*current_target->to_wait) (status)
+#define target_wait(pid, status) \
+ (*current_target->to_wait) (pid, status)
/* Fetch register REGNO, or all regs if regno == -1. No result. */
(*current_target->to_fetch_registers) (regno)
/* Store at least register REGNO, or all regs if REGNO == -1.
- It can store as many registers as it wants to, so the entire registers
- array must be valid. Result is 0 for success, -1 for problems. */
+ It can store as many registers as it wants to, so target_prepare_to_store
+ must have been previously called. Calls error() if there are problems. */
#define target_store_registers(regs) \
(*current_target->to_store_registers) (regs)
#define target_prepare_to_store() \
(*current_target->to_prepare_to_store) ()
-/* Reading and writing memory actually happens through a glue
- function which iterates across the various targets. Result is
- 0 for success, or an errno value. */
+extern int target_read_string PARAMS ((CORE_ADDR, char **, int, int *));
extern int
-target_read_string PARAMS ((CORE_ADDR, char *, int));
+target_read_memory PARAMS ((CORE_ADDR, char *, int));
extern int
-target_read_memory PARAMS ((CORE_ADDR, char *, int));
+target_read_memory_partial PARAMS ((CORE_ADDR, char *, int, int *));
extern int
target_write_memory PARAMS ((CORE_ADDR, char *, int));
extern int
child_xfer_memory PARAMS ((CORE_ADDR, char *, int, int, struct target_ops *));
-extern int
-target_xfer_memory PARAMS ((CORE_ADDR, char *, int, int));
+/* Transfer LEN bytes between target address MEMADDR and GDB address MYADDR.
+ Returns 0 for success, errno code for failure (which includes partial
+ transfers--if you want a more useful response to partial transfers, try
+ target_read_memory_partial). */
+
+extern int target_xfer_memory PARAMS ((CORE_ADDR memaddr, char *myaddr,
+ int len, int write));
/* From exec.c */
#define target_terminal_init() \
(*current_target->to_terminal_init) ()
-
+
/* Put the inferior's terminal settings into effect.
This is preparation for starting or resuming the inferior. */
#define target_mourn_inferior() \
(*current_target->to_mourn_inferior) ()
+/* Does target have enough data to do a run or attach command? */
+
+#define target_can_run(t) \
+ ((t)->to_can_run) ()
+
+/* post process changes to signal handling in the inferior. */
+
+#define target_notice_signals(pid) \
+ (*current_target->to_notice_signals) (pid)
+
/* Pointer to next target in the chain, e.g. a core file and an exec file. */
#define target_next \
#define target_has_registers \
(current_target->to_has_registers)
-/* Does the target have execution? Can we make it jump (through hoops),
- or pop its stack a few times? */
+/* Does the target have execution? Can we make it jump (through
+ hoops), or pop its stack a few times? FIXME: If this is to work that
+ way, it needs to check whether an inferior actually exists.
+ remote-udi.c and probably other targets can be the current target
+ when the inferior doesn't actually exist at the moment. Right now
+ this just tells us whether this target is *capable* of execution. */
#define target_has_execution \
(current_target->to_has_execution)
+extern void target_link PARAMS ((char *, CORE_ADDR *));
+
+/* Converts a process id to a string. Usually, the string just contains
+ `process xyz', but on some systems it may contain
+ `process xyz thread abc'. */
+
+#ifndef target_pid_to_str
+#define target_pid_to_str(PID) \
+ normal_pid_to_str (PID)
+extern char *normal_pid_to_str PARAMS ((int pid));
+#endif
+
/* Routines for maintenance of the target structures...
add_target: Add a target to the list of all possible targets.
struct section_table {
CORE_ADDR addr; /* Lowest address in section */
CORE_ADDR endaddr; /* 1+highest address in section */
- sec_ptr sec_ptr; /* BFD section pointer */
+
+ sec_ptr the_bfd_section;
+
bfd *bfd; /* BFD file pointer */
};
void
noprocess PARAMS ((void));
+void
+find_default_attach PARAMS ((char *, int));
+
+void
+find_default_create_inferior PARAMS ((char *, char *, char **));
+
+struct target_ops *
+find_core_target PARAMS ((void));
+\f
+/* Stuff that should be shared among the various remote targets. */
+
+/* Debugging level. 0 is off, and non-zero values mean to print some debug
+ information (higher values, more information). */
+extern int remote_debug;
+
+/* Speed in bits per second, or -1 which means don't mess with the speed. */
+extern int baud_rate;
+\f
+/* Functions for helping to write a native target. */
+
+/* This is for native targets which use a unix/POSIX-style waitstatus. */
+extern void store_waitstatus PARAMS ((struct target_waitstatus *, int));
+
+/* Convert between host signal numbers and enum target_signal's. */
+extern enum target_signal target_signal_from_host PARAMS ((int));
+extern int target_signal_to_host PARAMS ((enum target_signal));
+
#endif /* !defined (TARGET_H) */