#if !defined (TARGET_H)
#define TARGET_H
+struct objfile;
+struct ui_file;
+struct mem_attrib;
+
/* This include file defines the interface between the main part
of the debugger, and the part which is target-specific, or
specific to the communications interface between us and the
inferior. */
TARGET_WAITKIND_SPURIOUS,
- /* This is used for target async and extended-async
- only. Remote_async_wait() returns this when there is an event
+ /* An event has occured, but we should wait again.
+ Remote_async_wait() returns this when there is an event
on the inferior, but the rest of the world is not interested in
it. The inferior has not stopped, but has just sent some output
to the console, for instance. In this case, we want to go back
void (*to_close) (int);
void (*to_attach) (char *, int);
void (*to_post_attach) (int);
- void (*to_require_attach) (char *, int);
void (*to_detach) (char *, int);
- void (*to_require_detach) (int, char *, int);
+ void (*to_disconnect) (char *, int);
void (*to_resume) (ptid_t, int, enum target_signal);
ptid_t (*to_wait) (ptid_t, struct target_waitstatus *);
void (*to_post_wait) (ptid_t, int);
int (*to_remove_watchpoint) (CORE_ADDR, int, int);
int (*to_insert_watchpoint) (CORE_ADDR, int, int);
int (*to_stopped_by_watchpoint) (void);
+ int to_have_continuable_watchpoint;
CORE_ADDR (*to_stopped_data_address) (void);
int (*to_region_size_ok_for_hw_watchpoint) (int);
void (*to_terminal_init) (void);
void (*to_create_inferior) (char *, char *, char **);
void (*to_post_startup_inferior) (ptid_t);
void (*to_acknowledge_created_inferior) (int);
- void (*to_clone_and_follow_inferior) (int, int *);
- void (*to_post_follow_inferior_by_clone) (void);
int (*to_insert_fork_catchpoint) (int);
int (*to_remove_fork_catchpoint) (int);
int (*to_insert_vfork_catchpoint) (int);
int (*to_remove_vfork_catchpoint) (int);
- void (*to_post_follow_vfork) (int, int, int, int);
+ int (*to_follow_fork) (int);
int (*to_insert_exec_catchpoint) (int);
int (*to_remove_exec_catchpoint) (int);
int (*to_reported_exec_events_per_exec_call) (void);
struct exception_event_record *(*to_get_current_exception_event) (void);
char *(*to_pid_to_exec_file) (int pid);
enum strata to_stratum;
- struct target_ops
- *DONT_USE; /* formerly to_next */
int to_has_all_memory;
int to_has_memory;
int to_has_stack;
#define target_post_attach(pid) \
(*current_target.to_post_attach) (pid)
-/* Attaches to a process on the target side, if not already attached.
- (If already attached, takes no action.)
-
- This operation can be used to follow the child process of a fork.
- On some targets, such child processes of an original inferior process
- are automatically under debugger control, and thus do not require an
- actual attach operation. */
-
-#define target_require_attach(args, from_tty) \
- (*current_target.to_require_attach) (args, from_tty)
-
/* Takes a program previously attached to and detaches it.
The program may resume execution (some targets do, some don't) and will
no longer stop on signals, etc. We better not have left any breakpoints
extern void target_detach (char *, int);
-/* Detaches from a process on the target side, if not already dettached.
- (If already detached, takes no action.)
+/* Disconnect from the current target without resuming it (leaving it
+ waiting for a debugger). */
- This operation can be used to follow the parent process of a fork.
- On some targets, such child processes of an original inferior process
- are automatically under debugger control, and thus do require an actual
- detach operation.
-
- PID is the process id of the child to detach from.
- ARGS is arguments typed by the user (e.g. a signal to send the process).
- FROM_TTY says whether to be verbose or not. */
-
-#define target_require_detach(pid, args, from_tty) \
- (*current_target.to_require_detach) (pid, args, from_tty)
+extern void target_disconnect (char *, int);
/* Resume execution of the target process PTID. STEP says whether to
single-step or to run free; SIGGNAL is the signal to be given to
of bytes actually transfered is not defined) and ERR is set to a
non-zero error indication. */
-extern int
-target_read_memory_partial (CORE_ADDR addr, char *buf, int len, int *err);
+extern int target_read_memory_partial (CORE_ADDR addr, char *buf, int len,
+ int *err);
-extern int
-target_write_memory_partial (CORE_ADDR addr, char *buf, int len, int *err);
+extern int target_write_memory_partial (CORE_ADDR addr, char *buf, int len,
+ int *err);
extern char *child_pid_to_exec_file (int);
extern void child_acknowledge_created_inferior (int);
-extern void child_clone_and_follow_inferior (int, int *);
-
-extern void child_post_follow_inferior_by_clone (void);
-
extern int child_insert_fork_catchpoint (int);
extern int child_remove_fork_catchpoint (int);
extern void child_acknowledge_created_inferior (int);
-extern void child_post_follow_vfork (int, int, int, int);
+extern int child_follow_fork (int);
extern int child_insert_exec_catchpoint (int);
#define target_files_info() \
(*current_target.to_files_info) (¤t_target)
-/* Insert a breakpoint at address ADDR in the target machine.
- SAVE is a pointer to memory allocated for saving the
- target contents. It is guaranteed by the caller to be long enough
- to save "sizeof BREAKPOINT" bytes. Result is 0 for success, or
- an errno value. */
+/* Insert a breakpoint at address ADDR in the target machine. SAVE is
+ a pointer to memory allocated for saving the target contents. It
+ is guaranteed by the caller to be long enough to save the number of
+ breakpoint bytes indicated by BREAKPOINT_FROM_PC. Result is 0 for
+ success, or an errno value. */
#define target_insert_breakpoint(addr, save) \
(*current_target.to_insert_breakpoint) (addr, save)
#define target_acknowledge_created_inferior(pid) \
(*current_target.to_acknowledge_created_inferior) (pid)
-/* An inferior process has been created via a fork() or similar
- system call. This function will clone the debugger, then ensure
- that CHILD_PID is attached to by that debugger.
-
- FOLLOWED_CHILD is set TRUE on return *for the clone debugger only*,
- and FALSE otherwise. (The original and clone debuggers can use this
- to determine which they are, if need be.)
-
- (This is not a terribly useful feature without a GUI to prevent
- the two debuggers from competing for shell input.) */
-
-#define target_clone_and_follow_inferior(child_pid,followed_child) \
- (*current_target.to_clone_and_follow_inferior) (child_pid, followed_child)
-
-/* This operation is intended to be used as the last in a sequence of
- steps taken when following both parent and child of a fork. This
- is used by a clone of the debugger, which will follow the child.
-
- The original debugger has detached from this process, and the
- clone has attached to it.
-
- On some targets, this requires a bit of cleanup to make it work
- correctly. */
-
-#define target_post_follow_inferior_by_clone() \
- (*current_target.to_post_follow_inferior_by_clone) ()
-
/* On some targets, we can catch an inferior fork or vfork event when
it occurs. These functions insert/remove an already-created
catchpoint for such events. */
#define target_remove_vfork_catchpoint(pid) \
(*current_target.to_remove_vfork_catchpoint) (pid)
-/* An inferior process has been created via a vfork() system call.
- The debugger has followed the parent, the child, or both. The
- process of setting up for that follow may have required some
- target-specific trickery to track the sequence of reported events.
- If so, this function should be defined by those targets that
- require the debugger to perform cleanup or initialization after
- the vfork follow. */
+/* If the inferior forks or vforks, this function will be called at
+ the next resume in order to perform any bookkeeping and fiddling
+ necessary to continue debugging either the parent or child, as
+ requested, and releasing the other. Information about the fork
+ or vfork event is available via get_last_target_status ().
+ This function returns 1 if the inferior should not be resumed
+ (i.e. there is another event pending). */
-#define target_post_follow_vfork(parent_pid,followed_parent,child_pid,followed_child) \
- (*current_target.to_post_follow_vfork) (parent_pid,followed_parent,child_pid,followed_child)
+#define target_follow_fork(follow_child) \
+ (*current_target.to_follow_fork) (follow_child)
/* On some targets, we can catch an inferior exec event when it
occurs. These functions insert/remove an already-created
#define target_get_current_exception_event() \
(*current_target.to_get_current_exception_event) ()
-/* Pointer to next target in the chain, e.g. a core file and an exec file. */
-
-#define target_next \
- (current_target.to_next)
-
/* Does the target include all of memory, or only part of it? This
determines whether we look up the target chain for other parts of
memory if this target can't satisfy a request. */
#define target_async(CALLBACK,CONTEXT) \
(current_target.to_async((CALLBACK), (CONTEXT)))
-/* This is to be used ONLY within run_stack_dummy(). It
- provides a workaround, to have inferior function calls done in
- sychronous mode, even though the target is asynchronous. After
+/* This is to be used ONLY within call_function_by_hand(). It provides
+ a workaround, to have inferior function calls done in sychronous
+ mode, even though the target is asynchronous. After
target_async_mask(0) is called, calls to target_can_async_p() will
return FALSE , so that target_resume() will not try to start the
target asynchronously. After the inferior stops, we IMMEDIATELY
restore the previous nature of the target, by calling
target_async_mask(1). After that, target_can_async_p() will return
- TRUE. ANY OTHER USE OF THIS FEATURE IS DEPRECATED.
+ TRUE. ANY OTHER USE OF THIS FEATURE IS DEPRECATED.
FIXME ezannoni 1999-12-13: we won't need this once we move
the turning async on and off to the single execution commands,
#define target_get_thread_local_address_p() \
(target_get_thread_local_address != NULL)
-/* Hook to call target-dependent code after reading in a new symbol table. */
-
-#ifndef TARGET_SYMFILE_POSTREAD
-#define TARGET_SYMFILE_POSTREAD(OBJFILE)
-#endif
-
/* Hook to call target dependent code just after inferior target process has
started. */
(*current_target.to_stopped_by_watchpoint) ()
#endif
+/* Non-zero if we have continuable watchpoints */
+
+#ifndef HAVE_CONTINUABLE_WATCHPOINT
+#define HAVE_CONTINUABLE_WATCHPOINT \
+ (current_target.to_have_continuable_watchpoint)
+#endif
+
/* HP-UX supplies these operations, which respectively disable and enable
the memory page-protections that are used to implement hardware watchpoints
on that platform. See wait_for_inferior's use of these. */
/* Builds a section table, given args BFD, SECTABLE_PTR, SECEND_PTR.
Returns 0 if OK, 1 on error. */
-extern int
-build_section_table (bfd *, struct section_table **, struct section_table **);
+extern int build_section_table (bfd *, struct section_table **,
+ struct section_table **);
/* From mem-break.c */
extern int default_memory_insert_breakpoint (CORE_ADDR, char *);
-extern const unsigned char *memory_breakpoint_from_pc (CORE_ADDR *pcptr,
- int *lenptr);
-
/* From target.c */
extern void find_default_attach (char *, int);
-extern void find_default_require_attach (char *, int);
-
-extern void find_default_require_detach (int, char *, int);
-
extern void find_default_create_inferior (char *, char *, char **);
-extern void find_default_clone_and_follow_inferior (int, int *);
-
extern struct target_ops *find_run_target (void);
extern struct target_ops *find_core_target (void);
extern struct target_ops *find_target_beneath (struct target_ops *);
-extern int
-target_resize_to_sections (struct target_ops *target, int num_added);
+extern int target_resize_to_sections (struct target_ops *target,
+ int num_added);
extern void remove_target_sections (bfd *abfd);