/* Interface between GDB and target environments, including files and processes
- Copyright 1990, 1991 Free Software Foundation, Inc.
+ Copyright 1990, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
Contributed by Cygnus Support. Written by John Gilmore.
This file is part of GDB.
-GDB is free software; you can redistribute it and/or modify
+This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 1, or (at your option)
-any later version.
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
-GDB is distributed in the hope that it will be useful,
+This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
-along with GDB; see the file COPYING. If not, write to
-the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+
+#if !defined (TARGET_H)
+#define TARGET_H
/* This include file defines the interface between the main part
of the debugger, and the part which is target-specific, or
it goes into the file stratum, which is always below the process
stratum. */
+#include "bfd.h"
+
enum strata {
dummy_stratum, /* The lowest of the low */
file_stratum, /* Executable files, etc */
core_stratum, /* Core dump files */
- process_stratum, /* Executing processes */
+ download_stratum, /* Downloading of remote targets */
+ process_stratum /* Executing processes */
};
-struct target_ops {
- char *to_shortname; /* Name this target type */
- char *to_longname; /* Name for printing */
- /* Documentation. Does not include trailing newline, and
- starts with a one-line description (probably similar to
- to_longname). */
- char *to_doc;
-#ifdef __STDC__
- void (*to_open) (char *name, int from_tty);
- void (*to_close) (int quitting);
- void (*to_attach) (char *name, int from_tty);
- void (*to_detach) (char *args, int from_tty);
- void (*to_resume) (int step, int siggnal);
- int (*to_wait) (int *status);
- int (*to_fetch_registers) (int regno);
- int (*to_store_registers) (int regno);
- void (*to_prepare_to_store) ();
- void (*to_convert_to_virtual) (int regnum, char *from, char *to);
- void (*to_convert_from_virtual) (int regnum, char *from, char *to);
- int (*to_xfer_memory) (CORE_ADDR memaddr, char *myaddr, int len, int w);
- void (*to_files_info) ();
- int (*to_insert_breakpoint) (CORE_ADDR addr, char *save);
- int (*to_remove_breakpoint) (CORE_ADDR addr, char *save);
- void (*to_terminal_init) ();
- void (*to_terminal_inferior) ();
- void (*to_terminal_ours_for_output) ();
- void (*to_terminal_ours) ();
- void (*to_terminal_info) (char *arg, int from_tty);
- void (*to_kill) (char *arg, int from_tty);
- void (*to_load) (char *arg, int from_tty);
- void (*to_add_syms) (char *arg, int from_tty);
-struct value *(*to_call_function) (struct value *function,
- int nargs, struct value **args);
- int (*to_lookup_symbol) (char *name, CORE_ADDR *addrp);
- void (*to_create_inferior) (char *exec, char *args, char **env);
- void (*to_mourn_inferior) ();
- enum strata to_stratum;
-struct target_ops *to_next;
- int to_has_all_memory;
- int to_has_memory;
- int to_has_stack;
- int to_has_registers;
- int to_has_execution;
- int to_magic;
-/* Need sub-structure for target machine related rather than comm related? */
-#else /* STDC */
- void (*to_open) ();
- void (*to_close) ();
- void (*to_attach) ();
- void (*to_detach) ();
- void (*to_resume) ();
- int (*to_wait) ();
- int (*to_fetch_registers) ();
- int (*to_store_registers) ();
- void (*to_prepare_to_store) ();
- void (*to_convert_to_virtual) ();
- void (*to_convert_from_virtual) ();
- int (*to_xfer_memory) ();
- void (*to_files_info) ();
- int (*to_insert_breakpoint) ();
- int (*to_remove_breakpoint) ();
- void (*to_terminal_init) ();
- void (*to_terminal_inferior) ();
- void (*to_terminal_ours_for_output) ();
- void (*to_terminal_ours) ();
- void (*to_terminal_info) ();
- void (*to_kill) ();
- void (*to_load) ();
- void (*to_add_syms) ();
-struct value *(*to_call_function) ();
- int (*to_lookup_symbol) ();
- void (*to_create_inferior) ();
- void (*to_mourn_inferior) ();
- enum strata to_stratum;
-struct target_ops *to_next;
- int to_has_all_memory;
- int to_has_memory;
- int to_has_stack;
- int to_has_registers;
- int to_has_execution;
- int to_magic;
-/* Need sub-structure for target machine related rather than comm related? */
-#endif
+/* Stuff for target_wait. */
+
+/* Generally, what has the program done? */
+enum target_waitkind {
+ /* The program has exited. The exit status is in value.integer. */
+ TARGET_WAITKIND_EXITED,
+
+ /* The program has stopped with a signal. Which signal is in value.sig. */
+ TARGET_WAITKIND_STOPPED,
+
+ /* The program has terminated with a signal. Which signal is in
+ value.sig. */
+ TARGET_WAITKIND_SIGNALLED,
+
+ /* The program is letting us know that it dynamically loaded something
+ (e.g. it called load(2) on AIX). */
+ TARGET_WAITKIND_LOADED,
+
+ /* Nothing happened, but we stopped anyway. This perhaps should be handled
+ within target_wait, but I'm not sure target_wait should be resuming the
+ inferior. */
+ TARGET_WAITKIND_SPURIOUS
+ };
+
+/* The numbering of these signals is chosen to match traditional unix
+ signals (insofar as various unices use the same numbers, anyway).
+ It is also the numbering of the GDB remote protocol. Other remote
+ protocols, if they use a different numbering, should make sure to
+ translate appropriately. */
+
+/* This is based strongly on Unix/POSIX signals for several reasons:
+ (1) This set of signals represents a widely-accepted attempt to
+ represent events of this sort in a portable fashion, (2) we want a
+ signal to make it from wait to child_wait to the user intact, (3) many
+ remote protocols use a similar encoding. However, it is
+ recognized that this set of signals has limitations (such as not
+ distinguishing between various kinds of SIGSEGV, or not
+ distinguishing hitting a breakpoint from finishing a single step).
+ So in the future we may get around this either by adding additional
+ signals for breakpoint, single-step, etc., or by adding signal
+ codes; the latter seems more in the spirit of what BSD, System V,
+ etc. are doing to address these issues. */
+
+/* For an explanation of what each signal means, see
+ target_signal_to_string. */
+
+enum target_signal {
+ /* Used some places (e.g. stop_signal) to record the concept that
+ there is no signal. */
+ TARGET_SIGNAL_0 = 0,
+ TARGET_SIGNAL_FIRST = 0,
+ TARGET_SIGNAL_HUP = 1,
+ TARGET_SIGNAL_INT = 2,
+ TARGET_SIGNAL_QUIT = 3,
+ TARGET_SIGNAL_ILL = 4,
+ TARGET_SIGNAL_TRAP = 5,
+ TARGET_SIGNAL_ABRT = 6,
+ TARGET_SIGNAL_EMT = 7,
+ TARGET_SIGNAL_FPE = 8,
+ TARGET_SIGNAL_KILL = 9,
+ TARGET_SIGNAL_BUS = 10,
+ TARGET_SIGNAL_SEGV = 11,
+ TARGET_SIGNAL_SYS = 12,
+ TARGET_SIGNAL_PIPE = 13,
+ TARGET_SIGNAL_ALRM = 14,
+ TARGET_SIGNAL_TERM = 15,
+ TARGET_SIGNAL_URG = 16,
+ TARGET_SIGNAL_STOP = 17,
+ TARGET_SIGNAL_TSTP = 18,
+ TARGET_SIGNAL_CONT = 19,
+ TARGET_SIGNAL_CHLD = 20,
+ TARGET_SIGNAL_TTIN = 21,
+ TARGET_SIGNAL_TTOU = 22,
+ TARGET_SIGNAL_IO = 23,
+ TARGET_SIGNAL_XCPU = 24,
+ TARGET_SIGNAL_XFSZ = 25,
+ TARGET_SIGNAL_VTALRM = 26,
+ TARGET_SIGNAL_PROF = 27,
+ TARGET_SIGNAL_WINCH = 28,
+ TARGET_SIGNAL_LOST = 29,
+ TARGET_SIGNAL_USR1 = 30,
+ TARGET_SIGNAL_USR2 = 31,
+ TARGET_SIGNAL_PWR = 32,
+ /* Similar to SIGIO. Perhaps they should have the same number. */
+ TARGET_SIGNAL_POLL = 33,
+ TARGET_SIGNAL_WIND = 34,
+ TARGET_SIGNAL_PHONE = 35,
+ TARGET_SIGNAL_WAITING = 36,
+ TARGET_SIGNAL_LWP = 37,
+ TARGET_SIGNAL_DANGER = 38,
+ TARGET_SIGNAL_GRANT = 39,
+ TARGET_SIGNAL_RETRACT = 40,
+ TARGET_SIGNAL_MSG = 41,
+ TARGET_SIGNAL_SOUND = 42,
+ TARGET_SIGNAL_SAK = 43,
+ TARGET_SIGNAL_PRIO = 44,
+ TARGET_SIGNAL_REALTIME_33 = 45,
+ TARGET_SIGNAL_REALTIME_34 = 46,
+ TARGET_SIGNAL_REALTIME_35 = 47,
+ TARGET_SIGNAL_REALTIME_36 = 48,
+ TARGET_SIGNAL_REALTIME_37 = 49,
+ TARGET_SIGNAL_REALTIME_38 = 50,
+ TARGET_SIGNAL_REALTIME_39 = 51,
+ TARGET_SIGNAL_REALTIME_40 = 52,
+ TARGET_SIGNAL_REALTIME_41 = 53,
+ TARGET_SIGNAL_REALTIME_42 = 54,
+ TARGET_SIGNAL_REALTIME_43 = 55,
+ TARGET_SIGNAL_REALTIME_44 = 56,
+ TARGET_SIGNAL_REALTIME_45 = 57,
+ TARGET_SIGNAL_REALTIME_46 = 58,
+ TARGET_SIGNAL_REALTIME_47 = 59,
+ TARGET_SIGNAL_REALTIME_48 = 60,
+ TARGET_SIGNAL_REALTIME_49 = 61,
+ TARGET_SIGNAL_REALTIME_50 = 62,
+ TARGET_SIGNAL_REALTIME_51 = 63,
+ TARGET_SIGNAL_REALTIME_52 = 64,
+ TARGET_SIGNAL_REALTIME_53 = 65,
+ TARGET_SIGNAL_REALTIME_54 = 66,
+ TARGET_SIGNAL_REALTIME_55 = 67,
+ TARGET_SIGNAL_REALTIME_56 = 68,
+ TARGET_SIGNAL_REALTIME_57 = 69,
+ TARGET_SIGNAL_REALTIME_58 = 70,
+ TARGET_SIGNAL_REALTIME_59 = 71,
+ TARGET_SIGNAL_REALTIME_60 = 72,
+ TARGET_SIGNAL_REALTIME_61 = 73,
+ TARGET_SIGNAL_REALTIME_62 = 74,
+ TARGET_SIGNAL_REALTIME_63 = 75,
+
+ /* Mach exceptions */
+ TARGET_EXC_BAD_ACCESS = 76,
+ TARGET_EXC_BAD_INSTRUCTION = 77,
+ TARGET_EXC_ARITHMETIC = 78,
+ TARGET_EXC_EMULATION = 79,
+ TARGET_EXC_SOFTWARE = 80,
+ TARGET_EXC_BREAKPOINT = 81,
+
+ /* Some signal we don't know about. */
+ TARGET_SIGNAL_UNKNOWN,
+
+ /* Use whatever signal we use when one is not specifically specified
+ (for passing to proceed and so on). */
+ TARGET_SIGNAL_DEFAULT,
+
+ /* Last and unused enum value, for sizing arrays, etc. */
+ TARGET_SIGNAL_LAST
+};
+
+struct target_waitstatus {
+ enum target_waitkind kind;
+
+ /* Exit status or signal number. */
+ union {
+ int integer;
+ enum target_signal sig;
+ } value;
+};
+
+/* Return the string for a signal. */
+extern char *target_signal_to_string PARAMS ((enum target_signal));
+
+/* Return the name (SIGHUP, etc.) for a signal. */
+extern char *target_signal_to_name PARAMS ((enum target_signal));
+
+/* Given a name (SIGHUP, etc.), return its signal. */
+enum target_signal target_signal_from_name PARAMS ((char *));
+\f
+/* If certain kinds of activity happen, target_wait should perform
+ callbacks. */
+/* Right now we just call (*TARGET_ACTIVITY_FUNCTION) if I/O is possible
+ on TARGET_ACTIVITY_FD. */
+extern int target_activity_fd;
+/* Returns zero to leave the inferior alone, one to interrupt it. */
+extern int (*target_activity_function) PARAMS ((void));
+\f
+struct target_ops
+{
+ char *to_shortname; /* Name this target type */
+ char *to_longname; /* Name for printing */
+ char *to_doc; /* Documentation. Does not include trailing
+ newline, and starts with a one-line descrip-
+ tion (probably similar to to_longname). */
+ void (*to_open) PARAMS ((char *, int));
+ void (*to_close) PARAMS ((int));
+ void (*to_attach) PARAMS ((char *, int));
+ void (*to_detach) PARAMS ((char *, int));
+ void (*to_resume) PARAMS ((int, int, enum target_signal));
+ int (*to_wait) PARAMS ((int, struct target_waitstatus *));
+ void (*to_fetch_registers) PARAMS ((int));
+ void (*to_store_registers) PARAMS ((int));
+ void (*to_prepare_to_store) PARAMS ((void));
+
+ /* Transfer LEN bytes of memory between GDB address MYADDR and
+ target address MEMADDR. If WRITE, transfer them to the target, else
+ transfer them from the target. TARGET is the target from which we
+ get this function.
+
+ Return value, N, is one of the following:
+
+ 0 means that we can't handle this. If errno has been set, it is the
+ error which prevented us from doing it (FIXME: What about bfd_error?).
+
+ positive (call it N) means that we have transferred N bytes
+ starting at MEMADDR. We might be able to handle more bytes
+ beyond this length, but no promises.
+
+ negative (call its absolute value N) means that we cannot
+ transfer right at MEMADDR, but we could transfer at least
+ something at MEMADDR + N. */
+
+ int (*to_xfer_memory) PARAMS ((CORE_ADDR memaddr, char *myaddr,
+ int len, int write,
+ struct target_ops * target));
+
+#if 0
+ /* Enable this after 4.12. */
+
+ /* Search target memory. Start at STARTADDR and take LEN bytes of
+ target memory, and them with MASK, and compare to DATA. If they
+ match, set *ADDR_FOUND to the address we found it at, store the data
+ we found at LEN bytes starting at DATA_FOUND, and return. If
+ not, add INCREMENT to the search address and keep trying until
+ the search address is outside of the range [LORANGE,HIRANGE).
+
+ If we don't find anything, set *ADDR_FOUND to (CORE_ADDR)0 and return. */
+ void (*to_search) PARAMS ((int len, char *data, char *mask,
+ CORE_ADDR startaddr, int increment,
+ CORE_ADDR lorange, CORE_ADDR hirange,
+ CORE_ADDR *addr_found, char *data_found));
+
+#define target_search(len, data, mask, startaddr, increment, lorange, hirange, addr_found, data_found) \
+ (*current_target.to_search) (len, data, mask, startaddr, increment, \
+ lorange, hirange, addr_found, data_found)
+#endif /* 0 */
+
+ void (*to_files_info) PARAMS ((struct target_ops *));
+ int (*to_insert_breakpoint) PARAMS ((CORE_ADDR, char *));
+ int (*to_remove_breakpoint) PARAMS ((CORE_ADDR, char *));
+ void (*to_terminal_init) PARAMS ((void));
+ void (*to_terminal_inferior) PARAMS ((void));
+ void (*to_terminal_ours_for_output) PARAMS ((void));
+ void (*to_terminal_ours) PARAMS ((void));
+ void (*to_terminal_info) PARAMS ((char *, int));
+ void (*to_kill) PARAMS ((void));
+ void (*to_load) PARAMS ((char *, int));
+ int (*to_lookup_symbol) PARAMS ((char *, CORE_ADDR *));
+ void (*to_create_inferior) PARAMS ((char *, char *, char **));
+ void (*to_mourn_inferior) PARAMS ((void));
+ int (*to_can_run) PARAMS ((void));
+ void (*to_notice_signals) PARAMS ((int pid));
+ int (*to_thread_alive) PARAMS ((int pid));
+ void (*to_stop) PARAMS ((void));
+ enum strata to_stratum;
+ struct target_ops
+ *DONT_USE; /* formerly to_next */
+ int to_has_all_memory;
+ int to_has_memory;
+ int to_has_stack;
+ int to_has_registers;
+ int to_has_execution;
+ struct section_table
+ *to_sections;
+ struct section_table
+ *to_sections_end;
+ int to_magic;
+ /* Need sub-structure for target machine related rather than comm related? */
};
/* Magic number for checking ops size. If a struct doesn't end with this
#define OPS_MAGIC 3840
-/* The ops structure for our "current" target process. */
+/* The ops structure for our "current" target process. This should
+ never be NULL. If there is no target, it points to the dummy_target. */
+
+extern struct target_ops current_target;
+
+/* An item on the target stack. */
+
+struct target_stack_item
+{
+ struct target_stack_item *next;
+ struct target_ops *target_ops;
+};
+
+/* The target stack. */
-extern struct target_ops *current_target;
+extern struct target_stack_item *target_stack;
/* Define easy words for doing these operations on our current target. */
-#define target_shortname (current_target->to_shortname)
-#define target_longname (current_target->to_longname)
+#define target_shortname (current_target.to_shortname)
+#define target_longname (current_target.to_longname)
/* The open routine takes the rest of the parameters from the command,
and (if successful) pushes a new target onto the stack.
Targets should supply this routine, if only to provide an error message. */
#define target_open(name, from_tty) \
- (*current_target->to_open) (name, from_tty)
+ (*current_target.to_open) (name, from_tty)
/* Does whatever cleanup is required for a target that we are no longer
going to be calling. Argument says whether we are quitting gdb and
do. */
#define target_close(quitting) \
- (*current_target->to_close) (quitting)
+ (*current_target.to_close) (quitting)
-/* Attaches to a process on the target side. */
+/* Attaches to a process on the target side. Arguments are as passed
+ to the `attach' command by the user. This routine can be called
+ when the target is not on the target-stack, if the target_can_run
+ routine returns 1; in that case, it must push itself onto the stack.
+ Upon exit, the target should be ready for normal operations, and
+ should be ready to deliver the status of the process immediately
+ (without waiting) to an upcoming target_wait call. */
#define target_attach(args, from_tty) \
- (*current_target->to_attach) (args, from_tty)
+ (*current_target.to_attach) (args, from_tty)
/* Takes a program previously attached to and detaches it.
The program may resume execution (some targets do, some don't) and will
typed by the user (e.g. a signal to send the process). FROM_TTY
says whether to be verbose or not. */
-#define target_detach(args, from_tty) \
- (*current_target->to_detach) (args, from_tty)
+extern void
+target_detach PARAMS ((char *, int));
-/* Resume execution of the target process. STEP says whether to single-step
- or to run free; SIGGNAL is the signal value (e.g. SIGINT) to be given
- to the target, or zero for no signal. */
+/* Resume execution of the target process PID. STEP says whether to
+ single-step or to run free; SIGGNAL is the signal to be given to
+ the target, or TARGET_SIGNAL_0 for no signal. The caller may not
+ pass TARGET_SIGNAL_DEFAULT. */
-#define target_resume(step, siggnal) \
- (*current_target->to_resume) (step, siggnal)
+#define target_resume(pid, step, siggnal) \
+ (*current_target.to_resume) (pid, step, siggnal)
-/* Wait for inferior process to do something. Return pid of child,
- or -1 in case of error; store status through argument pointer STATUS. */
+/* Wait for process pid to do something. Pid = -1 to wait for any pid
+ to do something. Return pid of child, or -1 in case of error;
+ store status through argument pointer STATUS. Note that it is
+ *not* OK to return_to_top_level out of target_wait without popping
+ the debugging target from the stack; GDB isn't prepared to get back
+ to the prompt with a debugging target but without the frame cache,
+ stop_pc, etc., set up. */
-#define target_wait(status) \
- (*current_target->to_wait) (status)
+#define target_wait(pid, status) \
+ (*current_target.to_wait) (pid, status)
-/* Fetch register REGNO, or all regs if regno == -1. Result is 0
- for success, -1 for problems. */
+/* Fetch register REGNO, or all regs if regno == -1. No result. */
#define target_fetch_registers(regno) \
- (*current_target->to_fetch_registers) (regno)
+ (*current_target.to_fetch_registers) (regno)
/* Store at least register REGNO, or all regs if REGNO == -1.
- It can store as many registers as it wants to, so the entire registers
- array must be valid. Result is 0 for success, -1 for problems. */
+ It can store as many registers as it wants to, so target_prepare_to_store
+ must have been previously called. Calls error() if there are problems. */
#define target_store_registers(regs) \
- (*current_target->to_store_registers) (regs)
+ (*current_target.to_store_registers) (regs)
/* Get ready to modify the registers array. On machines which store
individual registers, this doesn't need to do anything. On machines
debugged. */
#define target_prepare_to_store() \
- (*current_target->to_prepare_to_store) ()
-
-/* Convert data from raw format for register REGNUM
- to virtual format for register REGNUM. */
-
-#define target_convert_to_virtual(regnum, from, to) \
- (*current_target->to_convert_to_virtual) (regnum, from, to)
-
-/* Convert data from virtual format for register REGNUM
- to raw format for register REGNUM. */
-
-#define target_convert_from_virtual(regnum, from, to) \
- (*current_target->to_convert_from_virtual) (regnum, from, to)
-
-/* Reading and writing memory actually happens through a glue
- function which iterates across the various targets. Result is
- 0 for success, or an errno value. */
-
-#ifdef __STDC__
-/* Needs defs.h for CORE_ADDR */
-extern int target_read_memory(CORE_ADDR memaddr, char *myaddr, int len);
-extern int target_write_memory(CORE_ADDR memaddr, char *myaddr, int len);
-extern int target_xfer_memory(CORE_ADDR memaddr, char *myaddr, int len,
- int write);
-#else
-extern int target_read_memory();
-extern int target_write_memory();
-extern int target_xfer_memory();
-#endif
+ (*current_target.to_prepare_to_store) ()
+
+extern int target_read_string PARAMS ((CORE_ADDR, char **, int, int *));
+
+extern int
+target_read_memory PARAMS ((CORE_ADDR memaddr, char *myaddr, int len));
+
+extern int
+target_read_memory_section PARAMS ((CORE_ADDR memaddr, char *myaddr, int len,
+ asection *bfd_section));
+
+extern int
+target_read_memory_partial PARAMS ((CORE_ADDR, char *, int, int *));
+
+extern int
+target_write_memory PARAMS ((CORE_ADDR, char *, int));
+
+extern int
+xfer_memory PARAMS ((CORE_ADDR, char *, int, int, struct target_ops *));
+
+extern int
+child_xfer_memory PARAMS ((CORE_ADDR, char *, int, int, struct target_ops *));
+
+/* From exec.c */
+
+extern void
+print_section_info PARAMS ((struct target_ops *, bfd *));
/* Print a line about the current target. */
#define target_files_info() \
- (*current_target->to_files_info) ()
+ (*current_target.to_files_info) (¤t_target)
/* Insert a breakpoint at address ADDR in the target machine.
SAVE is a pointer to memory allocated for saving the
an errno value. */
#define target_insert_breakpoint(addr, save) \
- (*current_target->to_insert_breakpoint) (addr, save)
+ (*current_target.to_insert_breakpoint) (addr, save)
/* Remove a breakpoint at address ADDR in the target machine.
SAVE is a pointer to the same save area
Result is 0 for success, or an errno value. */
#define target_remove_breakpoint(addr, save) \
- (*current_target->to_remove_breakpoint) (addr, save)
+ (*current_target.to_remove_breakpoint) (addr, save)
/* Initialize the terminal settings we record for the inferior,
before we actually run the inferior. */
#define target_terminal_init() \
- (*current_target->to_terminal_init) ()
-
+ (*current_target.to_terminal_init) ()
+
/* Put the inferior's terminal settings into effect.
This is preparation for starting or resuming the inferior. */
#define target_terminal_inferior() \
- (*current_target->to_terminal_inferior) ()
+ (*current_target.to_terminal_inferior) ()
/* Put some of our terminal settings into effect,
enough to get proper results from our output,
should be called to get back to a normal state of affairs. */
#define target_terminal_ours_for_output() \
- (*current_target->to_terminal_ours_for_output) ()
+ (*current_target.to_terminal_ours_for_output) ()
/* Put our terminal settings into effect.
First record the inferior's terminal settings
so they can be restored properly later. */
#define target_terminal_ours() \
- (*current_target->to_terminal_ours) ()
+ (*current_target.to_terminal_ours) ()
/* Print useful information about our terminal status, if such a thing
exists. */
#define target_terminal_info(arg, from_tty) \
- (*current_target->to_terminal_info) (arg, from_tty)
+ (*current_target.to_terminal_info) (arg, from_tty)
/* Kill the inferior process. Make it go away. */
-#define target_kill(arg, from_tty) \
- (*current_target->to_kill) (arg, from_tty)
+#define target_kill() \
+ (*current_target.to_kill) ()
/* Load an executable file into the target process. This is expected to
not only bring new code into the target process, but also to update
GDB's symbol tables to match. */
#define target_load(arg, from_tty) \
- (*current_target->to_load) (arg, from_tty)
-
-/* Add the symbols from an executable file into GDB's symbol table, as if
- the file had been loaded at a particular address (or set of addresses).
- This does not change any state in the target system, only in GDB. */
-
-#define target_add_syms(arg, from_tty) \
- (*current_target->to_add_syms) (arg, from_tty)
-
-/* Perform a function call in the inferior.
- ARGS is a vector of values of arguments (NARGS of them).
- FUNCTION is a value, the function to be called.
- Returns a value representing what the function returned.
- May fail to return, if a breakpoint or signal is hit
- during the execution of the function. */
-
-#define target_call_function(function, nargs, args) \
- (*current_target->to_call_function) (function, nargs, args)
+ (*current_target.to_load) (arg, from_tty)
/* Look up a symbol in the target's symbol table. NAME is the symbol
name. ADDRP is a CORE_ADDR * pointing to where the value of the symbol
doing a complain(). */
#define target_lookup_symbol(name, addrp) \
- (*current_target->to_lookup_symbol) (name, addrp)
+ (*current_target.to_lookup_symbol) (name, addrp)
/* Start an inferior process and set inferior_pid to its pid.
EXEC_FILE is the file to run.
On VxWorks and various standalone systems, we ignore exec_file. */
#define target_create_inferior(exec_file, args, env) \
- (*current_target->to_create_inferior) (exec_file, args, env)
+ (*current_target.to_create_inferior) (exec_file, args, env)
/* The inferior process has died. Do what is right. */
#define target_mourn_inferior() \
- (*current_target->to_mourn_inferior) ()
+ (*current_target.to_mourn_inferior) ()
+
+/* Does target have enough data to do a run or attach command? */
+
+#define target_can_run(t) \
+ ((t)->to_can_run) ()
+
+/* post process changes to signal handling in the inferior. */
+
+#define target_notice_signals(pid) \
+ (*current_target.to_notice_signals) (pid)
+
+/* Check to see if a thread is still alive. */
+
+#define target_thread_alive(pid) \
+ (*current_target.to_thread_alive) (pid)
+
+/* Make target stop in a continuable fashion. (For instance, under Unix, this
+ should act like SIGSTOP). This function is normally used by GUIs to
+ implement a stop button. */
+
+#define target_stop() current_target.to_stop ()
/* Pointer to next target in the chain, e.g. a core file and an exec file. */
#define target_next \
- (current_target->to_next)
+ (current_target.to_next)
/* Does the target include all of memory, or only part of it? This
determines whether we look up the target chain for other parts of
memory if this target can't satisfy a request. */
#define target_has_all_memory \
- (current_target->to_has_all_memory)
+ (current_target.to_has_all_memory)
/* Does the target include memory? (Dummy targets don't.) */
#define target_has_memory \
- (current_target->to_has_memory)
+ (current_target.to_has_memory)
/* Does the target have a stack? (Exec files don't, VxWorks doesn't, until
we start a process.) */
#define target_has_stack \
- (current_target->to_has_stack)
+ (current_target.to_has_stack)
/* Does the target have registers? (Exec files don't.) */
#define target_has_registers \
- (current_target->to_has_registers)
+ (current_target.to_has_registers)
-/* Does the target have execution? Can we make it jump (through hoops),
- or pop its stack a few times, or set breakpoints? */
+/* Does the target have execution? Can we make it jump (through
+ hoops), or pop its stack a few times? FIXME: If this is to work that
+ way, it needs to check whether an inferior actually exists.
+ remote-udi.c and probably other targets can be the current target
+ when the inferior doesn't actually exist at the moment. Right now
+ this just tells us whether this target is *capable* of execution. */
#define target_has_execution \
- (current_target->to_has_execution)
+ (current_target.to_has_execution)
+
+extern void target_link PARAMS ((char *, CORE_ADDR *));
+
+/* Converts a process id to a string. Usually, the string just contains
+ `process xyz', but on some systems it may contain
+ `process xyz thread abc'. */
+
+#ifndef target_pid_to_str
+#define target_pid_to_str(PID) \
+ normal_pid_to_str (PID)
+extern char *normal_pid_to_str PARAMS ((int pid));
+#endif
+
+#ifndef target_new_objfile
+#define target_new_objfile(OBJFILE)
+#endif
+
+/* Hook to call target-dependant code after reading in a new symbol table. */
+
+#ifndef TARGET_SYMFILE_POSTREAD
+#define TARGET_SYMFILE_POSTREAD(OBJFILE)
+#endif
+
+/* Hook to call target dependant code just after inferior target process has
+ started. */
+
+#ifndef TARGET_CREATE_INFERIOR_HOOK
+#define TARGET_CREATE_INFERIOR_HOOK(PID)
+#endif
+
+/* Hardware watchpoint interfaces. */
+
+/* Returns non-zero if we were stopped by a hardware watchpoint (memory read or
+ write). */
+
+#ifndef STOPPED_BY_WATCHPOINT
+#define STOPPED_BY_WATCHPOINT(w) 0
+#endif
+
+/* Provide defaults for systems that don't support hardware watchpoints. */
+
+#ifndef TARGET_HAS_HARDWARE_WATCHPOINTS
+
+/* Returns non-zero if we can set a hardware watchpoint of type TYPE. TYPE is
+ one of bp_hardware_watchpoint, bp_read_watchpoint, bp_write_watchpoint, or
+ bp_hardware_breakpoint. CNT is the number of such watchpoints used so far
+ (including this one?). OTHERTYPE is who knows what... */
+
+#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(TYPE,CNT,OTHERTYPE) 0
+
+/* Set/clear a hardware watchpoint starting at ADDR, for LEN bytes. TYPE is 0
+ for write, 1 for read, and 2 for read/write accesses. Returns 0 for
+ success, non-zero for failure. */
+
+#define target_remove_watchpoint(ADDR,LEN,TYPE) -1
+#define target_insert_watchpoint(ADDR,LEN,TYPE) -1
+
+#endif /* TARGET_HAS_HARDWARE_WATCHPOINTS */
+
+#ifndef target_insert_hw_breakpoint
+#define target_remove_hw_breakpoint(ADDR,SHADOW) -1
+#define target_insert_hw_breakpoint(ADDR,SHADOW) -1
+#endif
+
+#ifndef target_stopped_data_address
+#define target_stopped_data_address() 0
+#endif
+
+/* If defined, then we need to decr pc by this much after a hardware break-
+ point. Presumably this overrides DECR_PC_AFTER_BREAK... */
+
+#ifndef DECR_PC_AFTER_HW_BREAK
+#define DECR_PC_AFTER_HW_BREAK 0
+#endif
/* Routines for maintenance of the target structures...
pop_target: Remove the top thing on the stack of current targets. */
-#ifdef __STDC__
-void add_target (struct target_ops *);
-int push_target (struct target_ops *);
-int unpush_target (struct target_ops *);
-void target_preopen (int);
-void pop_target (void);
-#else
-void add_target ();
-int push_target ();
-int unpush_target ();
-void target_preopen ();
-void pop_target ();
-#endif
+extern void
+add_target PARAMS ((struct target_ops *));
+
+extern int
+push_target PARAMS ((struct target_ops *));
+
+extern int
+unpush_target PARAMS ((struct target_ops *));
+
+extern void
+target_preopen PARAMS ((int));
+
+extern void
+pop_target PARAMS ((void));
+
+/* Struct section_table maps address ranges to file sections. It is
+ mostly used with BFD files, but can be used without (e.g. for handling
+ raw disks, or files not in formats handled by BFD). */
+
+struct section_table {
+ CORE_ADDR addr; /* Lowest address in section */
+ CORE_ADDR endaddr; /* 1+highest address in section */
+
+ sec_ptr the_bfd_section;
+
+ bfd *bfd; /* BFD file pointer */
+};
+
+/* Builds a section table, given args BFD, SECTABLE_PTR, SECEND_PTR.
+ Returns 0 if OK, 1 on error. */
+
+extern int
+build_section_table PARAMS ((bfd *, struct section_table **,
+ struct section_table **));
+
+/* From mem-break.c */
+
+extern int
+memory_remove_breakpoint PARAMS ((CORE_ADDR, char *));
+
+extern int
+memory_insert_breakpoint PARAMS ((CORE_ADDR, char *));
+
+unsigned char *
+memory_breakpoint_from_pc PARAMS ((CORE_ADDR *pcptr, int *lenptr));
+
+/* From target.c */
+
+extern void
+initialize_targets PARAMS ((void));
+
+extern void
+noprocess PARAMS ((void));
+
+extern void
+find_default_attach PARAMS ((char *, int));
+
+extern void
+find_default_create_inferior PARAMS ((char *, char *, char **));
+
+extern struct target_ops *
+find_core_target PARAMS ((void));
+\f
+/* Stuff that should be shared among the various remote targets. */
+
+/* Debugging level. 0 is off, and non-zero values mean to print some debug
+ information (higher values, more information). */
+extern int remote_debug;
+
+/* Speed in bits per second, or -1 which means don't mess with the speed. */
+extern int baud_rate;
+/* Timeout limit for response from target. */
+extern int remote_timeout;
+
+extern asection *target_memory_bfd_section;
+\f
+/* Functions for helping to write a native target. */
+
+/* This is for native targets which use a unix/POSIX-style waitstatus. */
+extern void store_waitstatus PARAMS ((struct target_waitstatus *, int));
+
+/* Convert between host signal numbers and enum target_signal's. */
+extern enum target_signal target_signal_from_host PARAMS ((int));
+extern int target_signal_to_host PARAMS ((enum target_signal));
+
+/* Convert from a number used in a GDB command to an enum target_signal. */
+extern enum target_signal target_signal_from_command PARAMS ((int));
+
+/* Any target can call this to switch to remote protocol (in remote.c). */
+extern void push_remote_target PARAMS ((char *name, int from_tty));
+\f
+/* Imported from machine dependent code */
+
+#ifdef NO_SINGLE_STEP
+extern int one_stepped;
+extern void single_step PARAMS ((enum target_signal));
+#endif /* NO_SINGLE_STEP */
+
+#endif /* !defined (TARGET_H) */