-2000-02-16 Jim Blandy <jimb@redhat.com>
+2000-06-18 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
- * gdb.base/break.exp ("breakpoint line number"): Make sure the
- default source file is set properly before running this test.
+ * gdb.base/maint.exp: Add 'maint print architecture' item to output
+ of 'help maint print' command.
+
+Fri Jun 16 18:22:05 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * gdb.base/call-ar-st.exp: Rewrite all multi-line patterns so that
+ they use gdb_expect_list.
+
+Wed Jun 7 13:02:40 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * gdb.base/commands.exp: Use ``set remote
+ memory-read-packet-size'' instead of ``set endian big'' to test
+ long commands.
+
+2000-06-03 Daniel Berlin <dan@cgsoftware.com>
+
+ * gdb.c++/templates.exp (do_tests): Make all of these work under
+ g++, and stop skipping them.
+
+ * gdb.c++/namespace.exp: Move from gdb.hp/gdb.aCC to here, make it
+ work under g++.
+
+ * gdb.c++/misc.cc: Fix ambiguous initialization with correct
+ initialization.
+
+2000-06-02 Michael Snyder <msnyder@seadog.cygnus.com>
+
+ * gdb.base/annota1.exp (run until main breakpoint): Loosen up
+ the regular expression: accept an (almost) arbitrary sequence of
+ "frames-invalid" and "breakpoints-invalid" messages both before
+ and after the "starting" message.
+
+2000-06-02 Michael Snyder <msnyder@seadog.cygnus.com>
+
+ * gdb.c++/local.exp: This test has never been known to work with g++.
+
+2000-05-18 Michael Snyder <msnyder@seadog.cygnus.com>
+
+ * gdb.base/annota1.exp (annotate-signal-handler-caller):
+ Relax the regular expression a little, make it pass on Solaris 8.
+
+2000-05-12 Kevin Buettner <kevinb@redhat.com>
+
+ * gdb.base/step-test.exp: On IA-64 targets, when stepping out of
+ a call, do not require that gdb stop on the line after the call.
+ Instead, it is permissible for gdb to stop on the line of the
+ call itself.
+
+2000-05-12 Michael Snyder <msnyder@.cygnus.com>
+
+ * gdb.base/break.exp (bp on small function, optimized file):
+ Add a second pass pattern. The behavior differs here between stabs
+ and dwarf for one-line functions. Stabs preserves two line symbols
+ (one before the prologue and one after) with the same line number,
+ but dwarf regards these as duplicates and discards one of them.
+ Therefore the address after the prologue (where the breakpoint is)
+ has no exactly matching line symbol, and GDB reports the breakpoint
+ as if it were in the middle of a line rather than at the beginning.
+
+2000-05-08 Michael Snyder <msnyder@seadog.cygnus.com>
+
+ * gdb.base/interrupt.exp: Make "pass" message say "send"
+ rather than "send_gdb" (for consistancy).
+
+Mon May 1 15:37:58 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ From 2000-04-28 Andreas Jaeger <aj@suse.de>:
+ * gdb.c++/templates.cc: Properly check for GCC version number.
+ * lib/compiler.cc: Likewise
+
+2000-04-28 Michael Snyder <msnyder@seadog.cygnus.com>
+
+ * gdb.base/break.exp: When compiled with -O2 optimization,
+ gdb may not stop at the first line of main, due to code motion.
+
+2000-04-26 Michael Snyder <msnyder@seadog.cygnus.com>
+
+ * gdb.base/call-ar-st.exp: Bail out if target is sparclet.
+ This test depends on parsing the printf output from the target.
+ Since the sparclet stub doesn't do stdio, this will never work.
+ * gdb.base/call-rt-st.exp: ditto.
+ * gdb.base/call-strs: ditto.
+
+2000-04-24 Michael Snyder <msnyder@seadog.cygnus.com>
+
+ * gdb.base/miscexprs.exp: make sizeof long array test portable.
+
+ * gdb.base/ending-run.exp: After connecting to a remote target,
+ but before running, the target will appear to be in a random
+ location. Specify both a file and a line for breakpoints.
+ Also, the function that calls main may be called 'init'
+ rather than 'start'.
+
+2000-04-17 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
-2000-02-15 Jim Blandy <jimb@redhat.com>
+ * gdb.base/help.exp: Update output for add-symbol-file command.
+
+2000-04-10 Fernando Nasser <fnasser@cygnus.com>
+
+ From Franz Sirl <Franz.Sirl-kernel@lauterbach.com>
+ * gdb.base/structs2.c: Support platforms defaulting to a unsigned char.
+
+2000-04-07 J.T. Conklin <jtc@redback.com>
+
+ * gdb.base/call-ar-st.exp: Relax patterns matching tab characters.
+
+ * gdb.base/funcargs.exp: Relax patterns matching pointers to char.
+
+Thu Mar 30 13:26:19 2000 Philippe De Muyter <phdm@macqel.be>
+
+ * gdb.base/call-ar-st.c (init_small_structs, main): Use floating-point
+ values that can be represented exactly.
+ * gdb.base/call-ar-st.exp (print print_small_structs): Fixed to match
+ above change, and to not check against the directory part of the source
+ file name.
+ (step into print_long_arg_list): Likewise.
+ (print print_small_structs from print_long_arg_list): Likewise.
+ (print print_long_arg_list): Likewise.
+
+2000-03-27 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
+
+ * gdb.base/printcmds.c: Terminate char array ctable2 with 0.
+
+Mon Mar 27 14:46:37 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * ChangeLog, gdb.base/commands.exp: Revert whitespace changes.
+
+2000-03-25 Daniel Berlin <dan@cgsoftware.com>
+
+ * gdb.base/commands.exp (deprecated_command_test): Add test for
+ deprecate with no arguments.
+
+2000-03-24 Jonathan Larmour <jlarmour@redhat.co.uk>
+
+ * gdb.base/break.exp: Add new test for setting breakpoints on
+ optimized code so we can test breakpoints work even when function
+ prologues may be optimized away
+
+2000-03-23 Fernando Nasser <fnasser@totem.to.cygnus.com>
+
+ From David Whedon <dwhedon@gordian.com>
+ * gdb.base/commands.exp : Added command deprecator tests.
+
+2000-03-22 Daniel Berlin <dan@cgsoftware.com>
+
+ * gdb.base/help.exp: Added test for new apropos command.
+
+2000-03-21 Kevin Buettner <kevinb@redhat.com>
+
+ * gdb.base/pointers.c (usevar): New function.
+ (main): Make sure that global variables v_int_pointer2, rptr,
+ and y are all referenced someplace in the program by calling
+ usevar() on them. [Some linkers delete symbols which are
+ never referenced. The space remains, but there's no way to
+ get a (symbolic) handle on the variable from the debugger.]
+
+2000-03-14 Elena Zannoni <ezannoni@kwikemart.cygnus.com>
+
+ * gdb.base/printcmds.c: Add typedeffed arrays.
+
+ * gdb.base/printcmds.exp (test_print_typedef_arrays): New
+ procedure to test arrays that are typedef'd.
+
+2000-03-13 James Ingham <jingham@leda.cygnus.com>
+
+ * lib/gdb.exp: Fix the gdbtk_start routine to correctly find all
+ the library directories.
+
+Mon Feb 21 13:05:36 2000 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure.in (configdirs): Add sub directory gdb.mi.
+ * configure: Re-generate.
+
+ * gdb.mi: New directory.
+
+2000-02-25 Scott Bambrough <scottb@netwinder.org>
+
+ * gdb.base/long_long.exp: Correct test suite failure when printing
+ a long long value as a double on ARM platforms.
+
+2000-02-16 Jim Blandy <jimb@redhat.com>
* gdb.base/break.exp ("breakpoint line number"): Make sure the
default source file is set properly before running this test.