set testfile "break"
set srcfile ${testfile}.c
+set srcfile1 ${testfile}1.c
set binfile ${objdir}/${subdir}/${testfile}
-if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
- gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}0.o" object {debug nowarnings}] != "" } {
+ untested break.exp
+ return -1
+}
+
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile1}" "${binfile}1.o" object {debug nowarnings}] != "" } {
+ untested break.exp
+ return -1
+}
+
+if { [gdb_compile "${binfile}0.o ${binfile}1.o" "${binfile}" executable {debug nowarnings}] != "" } {
+ untested break.exp
+ return -1
}
if [get_compiler_info ${binfile}] {
# Test deleting all breakpoints when there are none installed,
# GDB should not prompt for confirmation.
-# Note that gdb-init.exp provides a "delete_breakpoints" proc
+# Note that lib/gdb.exp provides a "delete_breakpoints" proc
# for general use elsewhere.
send_gdb "delete breakpoints\n"
# test break at quoted function
#
gdb_test "break \"marker2\"" \
- "Breakpoint.*at.* file .*$srcfile, line.*" \
+ "Breakpoint.*at.* file .*$srcfile1, line.*" \
"breakpoint quoted function"
#
"Breakpoint.*at.* file .*$srcfile, line.*" \
"breakpoint function in file"
+set bp_location1 [gdb_get_line_number "set breakpoint 1 here"]
+
#
# test break at line number
#
gdb_test "list main" \
".*main \\(argc, argv, envp\\).*" \
"use `list' to establish default source file"
-gdb_test "break 79" \
- "Breakpoint.*at.* file .*$srcfile, line 79\\." \
+gdb_test "break $bp_location1" \
+ "Breakpoint.*at.* file .*$srcfile, line $bp_location1\\." \
"breakpoint line number"
#
# test duplicate breakpoint
#
-gdb_test "break 79" \
- "Note: breakpoint \[0-9\]+ also set at pc.*Breakpoint \[0-9\]+ at.* file .*$srcfile, line 79\\." \
+gdb_test "break $bp_location1" \
+ "Note: breakpoint \[0-9\]+ also set at pc.*Breakpoint \[0-9\]+ at.* file .*$srcfile, line $bp_location1\\." \
"breakpoint duplicate"
+set bp_location2 [gdb_get_line_number "set breakpoint 2 here"]
+
#
# test break at line number in file
#
-gdb_test "break $srcfile:85" \
- "Breakpoint.*at.* file .*$srcfile, line 85\\." \
+gdb_test "break $srcfile:$bp_location2" \
+ "Breakpoint.*at.* file .*$srcfile, line $bp_location2\\." \
"breakpoint line number in file"
+set bp_location3 [gdb_get_line_number "set breakpoint 3 here"]
+set bp_location4 [gdb_get_line_number "set breakpoint 4 here"]
#
# Test putting a break at the start of a multi-line if conditional.
# Verify the breakpoint was put at the start of the conditional.
#
gdb_test "break multi_line_if_conditional" \
- "Breakpoint.*at.* file .*$srcfile, line 109\\." \
+ "Breakpoint.*at.* file .*$srcfile, line $bp_location3\\." \
"breakpoint at start of multi line if conditional"
gdb_test "break multi_line_while_conditional" \
- "Breakpoint.*at.* file .*$srcfile, line 124\\." \
+ "Breakpoint.*at.* file .*$srcfile, line $bp_location4\\." \
"breakpoint at start of multi line while conditional"
+set bp_location5 [gdb_get_line_number "set breakpoint 5 here"]
+set bp_location6 [gdb_get_line_number "set breakpoint 6 here"]
+
#
# check to see what breakpoints are set
#
if [target_info exists gdb_stub] {
- set main_line 72
+ set main_line $bp_location5
} else {
- set main_line 75
+ set main_line $bp_location6
}
if {$hp_aCC_compiler} {
set proto ""
}
+set bp_location7 [gdb_get_line_number "set breakpoint 7 here"]
+set bp_location8 [gdb_get_line_number "set breakpoint 8 here" $srcfile1]
+set bp_location9 [gdb_get_line_number "set breakpoint 9 here" $srcfile1]
+
+verbose -log "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$main_line.*
+\[0-9\]+\[\t \]+breakpoint keep y.* in marker2 at .*$srcfile1:($bp_location8|$bp_location9).*
+\[0-9\]+\[\t \]+breakpoint keep y.* in factorial$proto at .*$srcfile:$bp_location7.*
+\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location1.*
+\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location1.*
+\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location2.*
+\[0-9\]+\[\t \]+breakpoint keep y.* in multi_line_if_conditional at .*$srcfile:$bp_location3.*
+\[0-9\]+\[\t \]+breakpoint keep y.* in multi_line_while_conditional at .*$srcfile:$bp_location4" \
+2
+
gdb_test "info break" \
"Num Type\[ \]+Disp Enb Address\[ \]+What.*
\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$main_line.*
-\[0-9\]+\[\t \]+breakpoint keep y.* in marker2 at .*$srcfile:4\[49\].*
-\[0-9\]+\[\t \]+breakpoint keep y.* in factorial$proto at .*$srcfile:96.*
-\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:79.*
-\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:79.*
-\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:85.*
-\[0-9\]+\[\t \]+breakpoint keep y.* in multi_line_if_conditional at .*$srcfile:109.*
-\[0-9\]+\[\t \]+breakpoint keep y.* in multi_line_while_conditional at .*$srcfile:124" \
+\[0-9\]+\[\t \]+breakpoint keep y.* in marker2 at .*$srcfile1:($bp_location8|$bp_location9).*
+\[0-9\]+\[\t \]+breakpoint keep y.* in factorial$proto at .*$srcfile:$bp_location7.*
+\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location1.*
+\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location1.*
+\[0-9\]+\[\t \]+breakpoint keep y.* in main at .*$srcfile:$bp_location2.*
+\[0-9\]+\[\t \]+breakpoint keep y.* in multi_line_if_conditional at .*$srcfile:$bp_location3.*
+\[0-9\]+\[\t \]+breakpoint keep y.* in multi_line_while_conditional at .*$srcfile:$bp_location4" \
"breakpoint info"
# FIXME: The rest of this test doesn't work with anything that can't
send_gdb "y\n"
exp_continue
}
- -re "Starting program.*Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:75.*75\[\t \]+if .argc.* \{.*$gdb_prompt $"\
+ -re "Starting program.*Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.* \{.*$gdb_prompt $"\
{ pass "run until function breakpoint" }
-re ".*$gdb_prompt $" { fail "run until function breakpoint" }
timeout { fail "run until function breakpoint (timeout)" }
}
} else {
if ![target_info exists gdb_stub] {
- gdb_test continue ".*Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:75.*75\[\t \]+if .argc.*\{.*" "stub continue"
+ gdb_test continue ".*Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.*\{.*" "stub continue"
}
}
#
# run until the breakpoint at a line number
#
-gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:79.*79\[\t \]+printf.*factorial.*" \
+gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location1.*$bp_location1\[\t \]+printf.*factorial.*" \
"run until breakpoint set at a line number"
#
# Run until the breakpoint set in a function in a file
#
for {set i 6} {$i >= 1} {incr i -1} {
- gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, factorial \\(value=$i\\) at .*$srcfile:96.*96\[\t \]+.*if .value > 1. \{.*" \
+ gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, factorial \\(value=$i\\) at .*$srcfile:$bp_location7.*$bp_location7\[\t \]+.*if .value > 1. \{.*" \
"run until file:function($i) breakpoint"
}
#
# Run until the breakpoint set at a quoted function
#
-gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, (0x\[0-9a-f\]+ in )?marker2 \\(a=43\\) at .*$srcfile:4\[49\].*" \
+gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, (0x\[0-9a-f\]+ in )?marker2 \\(a=43\\) at .*$srcfile1:($bp_location8|$bp_location9).*" \
"run until quoted breakpoint"
#
# run until the file:function breakpoint at a line number in a file
#
-gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:85.*85\[\t \]+argc = \\(argc == 12345\\);.*" \
+gdb_test continue "Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location2.*$bp_location2\[\t \]+argc = \\(argc == 12345\\);.*" \
"run until file:linenum breakpoint"
# Test break at offset +1
+set bp_location10 [gdb_get_line_number "set breakpoint 10 here"]
gdb_test "break +1" \
- "Breakpoint.*at.* file .*$srcfile, line 86\\." \
+ "Breakpoint.*at.* file .*$srcfile, line $bp_location10\\." \
"breakpoint offset +1"
# Check to see if breakpoint is hit when stepped onto
gdb_test "step" \
- ".*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:86.*86\[\t \]+return argc;" \
+ ".*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location10.*$bp_location10\[\t \]+return argc;.*breakpoint 10 here.*" \
"step onto breakpoint"
+# Check to see if breakpoint can be set on ending brace of function
+set bp_location10a [gdb_get_line_number "set breakpoint 10a here"]
+
+gdb_test "break $bp_location10a" \
+ "Breakpoint.*at.* file .*$srcfile, line $bp_location10a\\." \
+ "setting breakpoint at }"
+
+gdb_test "continue" \
+ ".*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location10a.*$bp_location10a\[\t \]+}.*breakpoint 10a here.*" \
+ "continue to breakpoint at }"
+
#
# delete all breakpoints so we can start over, course this can be a test too
#
#
# test break at line number
#
-send_gdb "tbreak 79\n"
+send_gdb "tbreak $bp_location1\n"
gdb_expect {
- -re "Breakpoint.*at.* file .*$srcfile, line 79.*$gdb_prompt $" { pass "Temporary breakpoint line number #1" }
+ -re "Breakpoint.*at.* file .*$srcfile, line $bp_location1.*$gdb_prompt $" { pass "Temporary breakpoint line number #1" }
-re ".*$gdb_prompt $" { pass "Temporary breakpoint line number #1" }
timeout { fail "breakpoint line number #1 (timeout)" }
}
-gdb_test "tbreak 75" "Breakpoint.*at.* file .*$srcfile, line 75.*" "Temporary breakpoint line number #2"
+gdb_test "tbreak $bp_location6" "Breakpoint.*at.* file .*$srcfile, line $bp_location6.*" "Temporary breakpoint line number #2"
#
# test break at line number in file
#
-send_gdb "tbreak $srcfile:85\n"
+send_gdb "tbreak $srcfile:$bp_location2\n"
gdb_expect {
- -re "Breakpoint.*at.* file .*$srcfile, line 85.*$gdb_prompt $" { pass "Temporary breakpoint line number in file #1" }
+ -re "Breakpoint.*at.* file .*$srcfile, line $bp_location2.*$gdb_prompt $" { pass "Temporary breakpoint line number in file #1" }
-re ".*$gdb_prompt $" { pass "Temporary breakpoint line number in file #1" }
timeout { fail "Temporary breakpoint line number in file #1 (timeout)" }
}
-gdb_test "tbreak $srcfile:81" "Breakpoint.*at.* file .*$srcfile, line 81.*" "Temporary breakpoint line number in file #2"
+set bp_location11 [gdb_get_line_number "set breakpoint 11 here"]
+gdb_test "tbreak $srcfile:$bp_location11" "Breakpoint.*at.* file .*$srcfile, line $bp_location11.*" "Temporary breakpoint line number in file #2"
#
# check to see what breakpoints are set (temporary this time)
#
gdb_test "info break" "Num Type.*Disp Enb Address.*What.*\[\r\n\]
\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$main_line.*\[\r\n\]
-\[0-9\]+\[\t \]+breakpoint del.*y.*in factorial$proto at .*$srcfile:96.*\[\r\n\]
-\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:79.*\[\r\n\]
-\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:75.*\[\r\n\]
-\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:85.*\[\r\n\]
-\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:81.*" \
+\[0-9\]+\[\t \]+breakpoint del.*y.*in factorial$proto at .*$srcfile:$bp_location7.*\[\r\n\]
+\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location1.*\[\r\n\]
+\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location6.*\[\r\n\]
+\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location2.*\[\r\n\]
+\[0-9\]+\[\t \]+breakpoint del.*y.*in main at .*$srcfile:$bp_location11.*" \
"Temporary breakpoint info"
# Run to the desired default location. If not positioned here, the
# tests below don't work.
#
-gdb_test "until 79" "main .* at .*:79.*" "until 79"
+gdb_test "until $bp_location1" "main .* at .*:$bp_location1.*" "until bp_location1"
# Verify that GDB allows one to just say "break", which is treated
#
if ![runto_main] then { fail "break tests suppressed" }
-send_gdb "break 79\n"
+send_gdb "break $bp_location1\n"
gdb_expect {
- -re "Breakpoint (\[0-9\]*) at .*, line 79.*$gdb_prompt $"\
- {pass "set to-be-silent break 79"}
+ -re "Breakpoint (\[0-9\]*) at .*, line $bp_location1.*$gdb_prompt $"\
+ {pass "set to-be-silent break bp_location1"}
-re "$gdb_prompt $"\
- {fail "set to-be-silent break 79"}
- timeout {fail "(timeout) set to-be-silent break 79"}
+ {fail "set to-be-silent break bp_location1"}
+ timeout {fail "(timeout) set to-be-silent break bp_location1"}
}
send_gdb "commands $expect_out(1,string)\n"
send_gdb "end\n"
gdb_expect {
-re ".*$gdb_prompt $"\
- {pass "set silent break 79"}
- timeout {fail "(timeout) set silent break 79"}
+ {pass "set silent break bp_location1"}
+ timeout {fail "(timeout) set silent break bp_location1"}
}
send_gdb "info break $expect_out(1,string)\n"
gdb_expect {
- -re "\[0-9\]*\[ \t\]*breakpoint.*:79\r\n\[ \t\]*silent.*$gdb_prompt $"\
- {pass "info silent break 79"}
+ -re "\[0-9\]*\[ \t\]*breakpoint.*:$bp_location1\r\n\[ \t\]*silent.*$gdb_prompt $"\
+ {pass "info silent break bp_location1"}
-re "$gdb_prompt $"\
- {fail "info silent break 79"}
- timeout {fail "(timeout) info silent break 79"}
+ {fail "info silent break bp_location1"}
+ timeout {fail "(timeout) info silent break bp_location1"}
}
send_gdb "continue\n"
gdb_expect {
-re "Continuing.\r\n$gdb_prompt $"\
- {pass "hit silent break 79"}
+ {pass "hit silent break bp_location1"}
-re "$gdb_prompt $"\
- {fail "hit silent break 79"}
- timeout {fail "(timeout) hit silent break 79"}
+ {fail "hit silent break bp_location1"}
+ timeout {fail "(timeout) hit silent break bp_location1"}
}
send_gdb "bt\n"
gdb_expect {
- -re "#0 main .* at .*:79.*$gdb_prompt $"\
- {pass "stopped for silent break 79"}
+ -re "#0 main .* at .*:$bp_location1.*$gdb_prompt $"\
+ {pass "stopped for silent break bp_location1"}
-re "$gdb_prompt $"\
- {fail "stopped for silent break 79"}
- timeout {fail "(timeout) stopped for silent break 79"}
+ {fail "stopped for silent break bp_location1"}
+ timeout {fail "(timeout) stopped for silent break bp_location1"}
}
# Verify that GDB can at least parse a breakpoint with the
# thread-specific breakpoint really triggers appropriately.
# The gdb.threads subdirectory contains tests for that.)
#
-send_gdb "break 80 thread 999\n"
+set bp_location12 [gdb_get_line_number "set breakpoint 12 here"]
+send_gdb "break $bp_location12 thread 999\n"
gdb_expect {
-re "Unknown thread 999.*$gdb_prompt $"\
{pass "thread-specific breakpoint on non-existent thread disallowed"}
{fail "thread-specific breakpoint on non-existent thread disallowed"}
timeout {fail "(timeout) thread-specific breakpoint on non-existent thread disallowed"}
}
-send_gdb "break 80 thread foo\n"
+send_gdb "break $bp_location12 thread foo\n"
gdb_expect {
-re "Junk after thread keyword..*$gdb_prompt $"\
{pass "thread-specific breakpoint on bogus thread ID disallowed"}
# Verify that GDB responds gracefully to a breakpoint command with
# trailing garbage.
#
-send_gdb "break 80 foo\n"
+send_gdb "break $bp_location12 foo\n"
gdb_expect {
-re "Junk at end of arguments..*$gdb_prompt $"\
{pass "breakpoint with trailing garbage disallowed"}
# Verify that a breakpoint can be set via a convenience variable.
#
-send_gdb "set \$foo=81\n"
+send_gdb "set \$foo=$bp_location11\n"
gdb_expect {
-re "$gdb_prompt $"\
- {pass "set convenience variable \$foo to 81"}
- timeout {fail "(timeout) set convenience variable \$foo to 81"}
+ {pass "set convenience variable \$foo to bp_location11"}
+ timeout {fail "(timeout) set convenience variable \$foo to bp_location11"}
}
send_gdb "break \$foo\n"
gdb_expect {
- -re "Breakpoint (\[0-9\]*) at .*, line 81.*$gdb_prompt $"\
+ -re "Breakpoint (\[0-9\]*) at .*, line $bp_location11.*$gdb_prompt $"\
{pass "set breakpoint via convenience variable"}
-re "$gdb_prompt $"\
{fail "set breakpoint via convenience variable"}
#
send_gdb "break marker2\n"
gdb_expect {
- -re "Breakpoint (\[0-9\]*) at .*, line 4\[49\].*$gdb_prompt $"\
+ -re "Breakpoint (\[0-9\]*) at .*, line ($bp_location8|$bp_location9).*$gdb_prompt $"\
{pass "set breakpoint on to-be-called function"}
-re "$gdb_prompt $"\
{fail "set breakpoint on to-be-called function"}
#
send_gdb "bt\n"
gdb_expect {
- -re "#0\[ \t\]*($hex in )?marker2.*:4\[49\]\r\n#1.*_sr4export.*$gdb_prompt $"\
+ -re "#0\[ \t\]*($hex in )?marker2.*:($bp_location8|$bp_location9)\r\n#1.*_sr4export.*$gdb_prompt $"\
{pass "backtrace while in called function"}
- -re "#0\[ \t\]*($hex in )?marker2.*:4\[49\]\r\n#1.*function called from gdb.*$gdb_prompt $"\
+ -re "#0\[ \t\]*($hex in )?marker2.*:($bp_location8|$bp_location9)\r\n#1.*function called from gdb.*$gdb_prompt $"\
{pass "backtrace while in called function"}
-re "$gdb_prompt $"\
{fail "backtrace while in called function"}
#
send_gdb "finish\n"
gdb_expect {
- -re "Run till exit from .*marker2.* at .*4\[49\]\r\n.* in _sr4export.*$gdb_prompt $"\
+ -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.* in _sr4export.*$gdb_prompt $"\
{pass "finish from called function"}
- -re "Run till exit from .*marker2.* at .*4\[49\]\r\n.*function called from gdb.*$gdb_prompt $"\
+ -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.*function called from gdb.*$gdb_prompt $"\
{pass "finish from called function"}
- -re "Run till exit from .*marker2.* at .*4\[49\]\r\n.*Value returned.*$gdb_prompt $"\
+ -re "Run till exit from .*marker2.* at .*($bp_location8|$bp_location9)\r\n.*Value returned.*$gdb_prompt $"\
{pass "finish from called function"}
-re "$gdb_prompt $"\
{fail "finish from called function"}
set binfileo2 ${objdir}/${subdir}/${testfile}o2
-if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfileo2}" executable {debug additional_flags="-O2" }] != "" } {
- gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}O0.o" object {debug nowarnings optimize=-O2}] != "" } {
+ untested break.exp
+ return -1
+}
+
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile1}" "${binfile}O1.o" object {debug nowarnings optimize=-O2}] != "" } {
+ untested break.exp
+ return -1
+}
+
+if { [gdb_compile "${binfile}O0.o ${binfile}O1.o" "${binfileo2}" executable {debug nowarnings}] != "" } {
+ untested break.exp
+ return -1
}
if [get_compiler_info ${binfileo2}] {
# test break at function
#
gdb_test "break main" \
- "Breakpoint.*at.* file .*$srcfile, line.*" \
+ "Breakpoint.*at.* file .*, line.*" \
"breakpoint function, optimized file"
#
# test break at function
#
gdb_test "break marker4" \
- "Breakpoint.*at.* file .*$srcfile, line.*" \
+ "Breakpoint.*at.* file .*$srcfile1, line.*" \
"breakpoint small function, optimized file"
#
send_gdb "y\n"
exp_continue
}
- -re "Starting program.*Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:75.*75\[\t \]+if .argc.* \{.*$gdb_prompt $"\
+ -re "Starting program.*Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.* \{.*$gdb_prompt $"\
{ pass "run until function breakpoint, optimized file" }
-re "Starting program.*Breakpoint \[0-9\]+,.*main .*argc.*argv.* at .*$gdb_prompt $"\
{ pass "run until function breakpoint, optimized file (code motion)" }
}
} else {
if ![target_info exists gdb_stub] {
- gdb_test continue ".*Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:75.*75\[\t \]+if .argc.*\{.*" "stub continue, optimized file"
+ gdb_test continue ".*Continuing\\..*Breakpoint \[0-9\]+, main \\(argc=.*, argv=.*, envp=.*\\) at .*$srcfile:$bp_location6.*$bp_location6\[\t \]+if .argc.*\{.*" "stub continue, optimized file"
}
}
# has no exactly matching line symbol, and GDB reports the breakpoint
# as if it were in the middle of a line rather than at the beginning.
+set bp_location13 [gdb_get_line_number "set breakpoint 13 here" $srcfile1]
+set bp_location14 [gdb_get_line_number "set breakpoint 14 here" $srcfile1]
send_gdb "continue\n"
gdb_expect {
- -re "Breakpoint $decimal, marker4 \\(d=177601976\\) at .*$srcfile:51\[\r\n\]+51\[\t \]+void marker4.*" {
+ -re "Breakpoint $decimal, marker4 \\(d=177601976\\) at .*$srcfile1:$bp_location13\[\r\n\]+$bp_location13\[\t \]+void marker4.*" {
pass "run until breakpoint set at small function, optimized file"
}
- -re "Breakpoint $decimal, $hex in marker4 \\(d=177601976\\) at .*$srcfile:51\[\r\n\]+51\[\t \]+void marker4.*" {
+ -re "Breakpoint $decimal, $hex in marker4 \\(d=177601976\\) at .*$srcfile1:$bp_location13\[\r\n\]+$bp_location13\[\t \]+void marker4.*" {
pass "run until breakpoint set at small function, optimized file"
}
- -re "Breakpoint $decimal, marker4 \\(d=177601976\\) at .*$srcfile:46\[\r\n\]+46\[\t \]+void marker4.*" {
+ -re "Breakpoint $decimal, marker4 \\(d=177601976\\) at .*$srcfile1:$bp_location14\[\r\n\]+$bp_location14\[\t \]+void marker4.*" {
# marker4() is defined at line 46 when compiled with -DPROTOTYPES
- pass "run until breakpoint set at small function, optimized file (line 46)"
+ pass "run until breakpoint set at small function, optimized file (line bp_location14)"
}
-re ".*$gdb_prompt " {
fail "run until breakpoint set at small function, optimized file"
projects / deliverable / binutils-gdb.git / blobdiff