-# Copyright (C) 1998
+# Copyright 1998, 1999, 2000, 2001, 2004, 2007, 2008, 2009, 2010
# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
-#
+#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-#
+#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-gdb@prep.ai.mit.edu
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# This file was written by Elena Zannoni (ezannoni@cygnus.com)
strace $tracelevel
}
-set prms_id 0
-set bug_id 0
set testfile "call-ar-st"
set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}
+# Test depends on printf, which the sparclet stub doesn't support.
+if { [istarget "sparclet-*-*"] } {
+ return 0;
+}
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
- gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+ untested "couldn't compile ${srcdir}/${subdir}/${srcfile}"
+ return -1
}
return -1;
}
-# The a29k can't call functions, so don't even bother with this test.
+# Some targets can't call functions, so don't even bother with this
+# test.
if [target_info exists gdb,cannot_call_functions] {
setup_xfail "*-*-*" 2416
fail "This target can not call functions"
continue
}
-# Set the current language to C. This counts as a test. If it
-# fails, then we skip the other tests.
-
-proc set_lang_c {} {
- global gdb_prompt
-
- send_gdb "set language c\n"
- gdb_expect {
- -re ".*$gdb_prompt $" {}
- timeout { fail "set language c (timeout)" ; return 0; }
- }
-
- send_gdb "show language\n"
- gdb_expect {
- -re ".* source language is \"c\".*$gdb_prompt $" {
- pass "set language to \"c\""
- return 1
- }
- -re ".*$gdb_prompt $" {
- fail "setting language to \"c\""
- return 0
- }
- timeout {
- fail "can't show language (timeout)"
- return 0
- }
- }
-}
-
-
-source ${binfile}.ci
-
+set oldtimeout $timeout
+set timeout [expr "$timeout + 60"]
# Start with a fresh gdb.
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
-send_gdb "set print sevenbit-strings\n" ; gdb_expect -re "$gdb_prompt $"
-send_gdb "set print address off\n" ; gdb_expect -re "$gdb_prompt $"
-send_gdb "set width 0\n" ; gdb_expect -re "$gdb_prompt $"
+gdb_test_no_output "set print sevenbit-strings"
+gdb_test_no_output "set print address off"
+gdb_test_no_output "set width 0"
if ![runto_main] then {
continue
}
-#go -until 1007
-gdb_test "tbreak 1007" \
- "Breakpoint \[0-9\]+.*file.*$srcfile, line 1007.*" \
- "tbreakpoint line 1007"
+get_debug_format
+
+#go -until 1209
+gdb_test "tbreak 1209" \
+ "Temporary breakpoint \[0-9\]+.*file.*$srcfile, line 1209.*" \
+ "tbreakpoint line 1209"
gdb_test continue \
-"Continuing\\..*main \\(\\) at.*$srcfile:1007.*" \
+"Continuing\\..*main \\(\\) at.*$srcfile:1209.*" \
"run until breakpoint set at a line"
#call print_double_array(double_array)
-send_gdb "print print_double_array(double_array)\n"
-gdb_expect {
- -re "array_d :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+23.456700 46.913400 70.370100 93.826800 117.283500 140.740200 164.196900 187.653600\[ \t\r\n\]+211.110300 234.567000 258.023700 281.480400 304.937100 328.393800 351.850500 375.307200\[ \t\r\n\]+398.763900 422.220600 445.677300 469.134000 492.590700 516.047400 539.504100 562.960800\[ \t\r\n\]+586.417500 609.874200 633.330900 656.787600 680.244300 703.701000 727.157700 750.614400\[ \t\r\n\]+774.071100 797.527800 820.984500 844.441200 867.897900 891.354600 914.811300 938.268000\[ \t\r\n\]+961.724700 985.181400 1008.638100 1032.094800 1055.551500 1079.008200 1102.464900 1125.921600\[ \t\r\n\]+1149.378300 1172.835000 1196.291700 1219.748400 1243.205100 1266.661800 1290.118500 1313.575200\[ \t\r\n\]+1337.031900 1360.488600 1383.945300 1407.402000 1430.858700 1454.315400 1477.772100 1501.228800\[ \t\r\n\]+1524.685500 1548.142200 1571.598900 1595.055600 1618.512300 1641.969000 1665.425700 1688.882400\[ \t\r\n\]+1712.339100 1735.795800 1759.252500 1782.709200 1806.165900 1829.622600 1853.079300 1876.536000\[ \t\r\n\]+1899.992700 1923.449400 1946.906100 1970.362800 1993.819500 2017.276200 2040.732900 2064.189600\[ \t\r\n\]+2087.646300 2111.103000 2134.559700 2158.016400 2181.473100 2204.929800 2228.386500 2251.843200\[ \t\r\n\]+2275.299900 2298.756600 2322.213300\[ \t\r\n\]+\[ \t\r\n\]+.*$gdb_prompt $" {
- pass "print print_double_array(double_array)"
- }
- -re ".*$gdb_prompt $" { fail "print print_double_array(double_array)" }
- timeout { fail "(timeout) print print_double_array(double_array)" }
- }
-
+if {![gdb_skip_float_test "print print_double_array(double_array)"] && \
+ ![gdb_skip_stdio_test "print print_double_array(double_array)"] } {
+ gdb_test_sequence "print print_double_array(double_array)" "" {
+ "\[ \t\r\n\]+array_d :"
+ "\[ \t\r\n\]+========="
+ "\[ \t\r\n\]+0.000000"
+ "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]"
+ "\[ \t\r\n\]+"
+ }
+}
#call print_char_array(char_array)
-send_gdb "print print_char_array(char_array)\n"
-gdb_expect {
- -re "array_c :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+Z\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+.*\[ \t\r\n\]+.*$gdb_prompt $" {
- pass "print print_char_array(char_array)"
- }
- -re ".*$gdb_prompt $" { fail "print print_char_array(char_array)" }
- timeout { fail "(timeout) print print_char_array(char_array)" }
- }
-
-
-
-#go -until 1014
-gdb_test "tbreak 1014" \
-"Breakpoint.*file.*$srcfile, line 1014.*" \
-"tbreakpoint line 1014"
-
-send_gdb "continue\n"
-gdb_expect {
- -re "array_c :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+Z\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+\[ \t\r\n\]+main.*at.*$srcfile:1014\[ \t\r\n\]+.*print_double_array\\(double_array\\).*$gdb_prompt $" {
- pass "continue to 1014"
- }
- -re ".*$gdb_prompt $" { fail "continue to 1014" }
- timeout { fail "(timeout) continue to 1014" }
+if ![gdb_skip_stdio_test "print_char_array(char_array)"] {
+ gdb_test_sequence "print print_char_array(char_array)" "" {
+ "\[ \t\r\n\]+array_c :"
+ "\[ \t\r\n\]+========="
+ "\[ \t\r\n\]+\[ \t\r\n\]+Z"
+ "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
+ "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
+ "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+"
+ }
+}
+
+#go -until 1216
+gdb_test "tbreak 1216" \
+"Temporary breakpoint.*file.*$srcfile, line 1216.*" \
+"tbreakpoint line 1216"
+
+if ![gdb_skip_stdio_test "continue to 1216"] {
+ gdb_test_sequence "continue" "continue to 1216" {
+ "\[ \t\r\n\]+array_c :"
+ "\[ \t\r\n\]+========="
+ "\[ \t\r\n\]+\[ \t\r\n\]+Z"
+ "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
+ "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ"
+ "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa"
+ "\[ \t\r\n\]+main.*at.*:1216"
+ "\[ \t\r\n\]+1216.*print_double_array\\(double_array\\)"
+ }
+} else {
+ gdb_test "continue" ".*" ""
}
# I am disabling this test, because it takes too long. I verified by
# }
#set timeout $oldtimeout
-#go -until 1018
-gdb_test "tbreak 1018" \
- "Breakpoint.* file .*$srcfile, line 1018.*" \
- "tbreakpoint line 1018"
-
-gdb_test continue \
-"Continuing\\..*array_d :.*array_f :.*student id :\[\t \]+.*YELLOW.*array_i :.*main \\(\\) at .*call-ar-st.c:1018\[ \t\r\n\]+.*print_all_arrays\\(integer_array, char_array, float_array, double_array\\)." \
-"continuing to breakpoint 1018"
-
-#step
- send_gdb "step\n"
- gdb_expect {
- -re "print_all_arrays \\(array_i=, array_c=.ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa., array_f=, array_d=\\) at .*call-ar-st.c:287\[ \t\r\n\]+287.*print_int_array\\(array_i\\);.*$gdb_prompt $" {pass "step inside print_all_arrays"}
- -re ".*$gdb_prompt $" { fail "step inside print_all_arrays" }
- timeout { fail "step inside print_all_arrays (timeout)" }
+#go -until 1220
+gdb_test "tbreak 1220" \
+ "Temporary breakpoint.* file .*$srcfile, line 1220.*" \
+ "tbreakpoint line 1220"
+
+if {![gdb_skip_float_test "continuing to breakpoint 1220"] && \
+ ![gdb_skip_stdio_test "continuing to breakpoint 1220"] } {
+ gdb_test_sequence "continue" "continuing to breakpoint 1220" {
+ "Continuing\\."
+ "\[ \t\r\n\]+array_d :"
+ "\[ \t\r\n\]+========="
+ "\[ \t\r\n\]+0.000000"
+ "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*"
+ "\[ \t\r\n\]+"
+ "array_f :"
+ "student id :\[\t \]+.*YELLOW"
+ "array_i :"
+ "main \\(\\) at .*call-ar-st.c:1220\[ \t\r\n\]+.*print_all_arrays\\(integer_array, char_array, float_array, double_array\\)."
}
+} else {
+ gdb_test "continue" ".*" ""
+}
+#step
+gdb_test "step" \
+ "print_all_arrays \\(array_i=, array_c=.ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa., array_f=, array_d=\\) at .*call-ar-st.c:306\[ \t\r\n\]+306.*print_int_array\\(array_i\\);.*" \
+ "step inside print_all_arrays"
#step -over
- send_gdb "next\n"
- gdb_expect {
- -re "array_i :.*288.*print_char_array\\(array_c\\);.*$gdb_prompt $" {pass "next over print_int_array in print-all_arrays"}
- -re ".*$gdb_prompt $" { fail "next over print_int_array in print-all_arrays" }
- timeout { fail "next over print_int_array in print-all_arrays (timeout)" }
- }
-
-
+if ![gdb_skip_stdio_test "next over print_int_array in print_all_arrays"] {
+ gdb_test "next" \
+ "array_i :.*307.*print_char_array.*" \
+ "next over print_int_array in print-all_arrays"
+} else {
+ gdb_test "next" ".*" ""
+}
#call print_double_array(array_d)
-send_gdb "print print_double_array(array_d)\n"
-gdb_expect {
- -re "array_d :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+23.456700 46.913400 70.370100 93.826800 117.283500 140.740200 164.196900 187.653600\[ \t\r\n\]+211.110300 234.567000 258.023700 281.480400 304.937100 328.393800 351.850500 375.307200\[ \t\r\n\]+398.763900 422.220600 445.677300 469.134000 492.590700 516.047400 539.504100 562.960800\[ \t\r\n\]+586.417500 609.874200 633.330900 656.787600 680.244300 703.701000 727.157700 750.614400\[ \t\r\n\]+774.071100 797.527800 820.984500 844.441200 867.897900 891.354600 914.811300 938.268000\[ \t\r\n\]+961.724700 985.181400 1008.638100 1032.094800 1055.551500 1079.008200 1102.464900 1125.921600\[ \t\r\n\]+1149.378300 1172.835000 1196.291700 1219.748400 1243.205100 1266.661800 1290.118500 1313.575200\[ \t\r\n\]+1337.031900 1360.488600 1383.945300 1407.402000 1430.858700 1454.315400 1477.772100 1501.228800\[ \t\r\n\]+1524.685500 1548.142200 1571.598900 1595.055600 1618.512300 1641.969000 1665.425700 1688.882400\[ \t\r\n\]+1712.339100 1735.795800 1759.252500 1782.709200 1806.165900 1829.622600 1853.079300 1876.536000\[ \t\r\n\]+1899.992700 1923.449400 1946.906100 1970.362800 1993.819500 2017.276200 2040.732900 2064.189600\[ \t\r\n\]+2087.646300 2111.103000 2134.559700 2158.016400 2181.473100 2204.929800 2228.386500 2251.843200\[ \t\r\n\]+2275.299900 2298.756600 2322.213300\[ \t\r\n\]+\[ \t\r\n\]+.*$gdb_prompt $" {
- pass "print print_double_array(array_d)"
- }
- -re ".*$gdb_prompt $" { fail "print print_double_array(array_d)" }
- timeout { fail "(timeout) print print_double_array(array_d)" }
- }
-
-
-#go -until 1034
-gdb_test "tbreak 1034" \
-"Breakpoint.* file .*$srcfile, line 1034.*" \
-"tbreakpoint line 1034"
+if {![gdb_skip_float_test "print print_double_array(array_d)"] && \
+ ![gdb_skip_stdio_test "print print_double_array(array_d)"] } {
+ gdb_test_sequence "print print_double_array(array_d)" "" {
+ "array_d :"
+ "\[ \t\r\n\]+========="
+ "\[ \t\r\n\]+\[ \t\r\n\]+0.000000"
+ "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*"
+ "\[ \t\r\n\]+"
+ }
+}
-gdb_test continue "Continuing\\..*array_c.*array_f.*array_d.*HELLO WORLD.*main \\(\\) at .*call-ar-st.c:1034.*printf\\(.BYE BYE FOR NOW.n.\\)." "continuing to 1034"
+#go -until 1236
+gdb_test "tbreak 1236" \
+"Temporary breakpoint.* file .*$srcfile, line 1236.*" \
+"tbreakpoint line 1236"
+
+if {![gdb_skip_float_test "continuing to 1236"] && \
+ ![gdb_skip_stdio_test "continuing to 1236"] } {
+ gdb_test_sequence "continue" "continuing to 1236" {
+ "Continuing\\..*array_c"
+ "array_f"
+ "\[ \t\r\n\]+array_d :"
+ "\[ \t\r\n\]+========="
+ "\[ \t\r\n\]+0.000000"
+ "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*"
+ "\[ \t\r\n\]+.*HELLO WORLD.*main \\(\\) at .*call-ar-st.c:1236.*printf\\(.BYE BYE FOR NOW.n.\\)."
+ }
+} else {
+ gdb_test "continue" ".*" ""
+}
#call sum_array_print(10, *list1, *list2, *list3, *list4)
-send_gdb "print sum_array_print(10, *list1, *list2, *list3, *list4)\n"
-gdb_expect {
- -re ".*Sum of 4 arrays, by element \\(add in seed as well\\):\[ \t\r\n\]+Seed: 10\[ \t\r\n\]+Element Index . Sum\[ \t\r\n\]+-------------------------\[ \t\r\n\]+.*\[ \t\]+0\[ \t\]+52\[ \t\r\n\]+1\[ \t\]+60\[ \t\r\n\]+2\[ \t\]+68\[ \t\r\n\]+3\[ \t\]+76\[ \t\r\n\]+4\[ \t\]+84\[ \t\r\n\]+5\[ \t\]+92\[ \t\r\n\]+6\[ \t\]+100\[ \t\r\n\]+7\[ \t\]+108\[ \t\r\n\]+8\[ \t\]+116\[ \t\r\n\]+9\[ \t\]+124\[ \t\r\n\]+.*$gdb_prompt $" {
- pass "print sum_array_print(10, *list1, *list2, *list3, *list4)"
- }
- -re ".*$gdb_prompt $" { fail "print sum_array_print(10, *list1, *list2, *list3, *list4)" }
- timeout { fail "(timeout) print sum_array_print(10, *list1, *list2, *list3, *list4)" }
- }
+if ![gdb_skip_stdio_test "print sum_array_print(...)"] {
+ gdb_test "print sum_array_print(10, *list1, *list2, *list3, *list4)" \
+ ".*Sum of 4 arrays, by element \\(add in seed as well\\):\[ \t\r\n\]+Seed: 10\[ \t\r\n\]+Element Index . Sum\[ \t\r\n\]+-------------------------\[ \t\r\n\]+.*\[ \t\]+0\[ \t\]+52\[ \t\r\n\]+1\[ \t\]+60\[ \t\r\n\]+2\[ \t\]+68\[ \t\r\n\]+3\[ \t\]+76\[ \t\r\n\]+4\[ \t\]+84\[ \t\r\n\]+5\[ \t\]+92\[ \t\r\n\]+6\[ \t\]+100\[ \t\r\n\]+7\[ \t\]+108\[ \t\r\n\]+8\[ \t\]+116\[ \t\r\n\]+9\[ \t\]+124\[ \t\r\n\]+.*" \
+ "print sum_array_print(10, *list1, *list2, *list3, *list4)"
+}
#step over
-send_gdb "n\n"
-gdb_expect {
- -re ".*BYE BYE FOR NOW.*1035.*printf\\(.VERY GREEN GRASS.n.\\);.*$gdb_prompt $" { pass "next to 1035"}
- -re ".*$gdb_prompt $" { fail "next to 1035" }
- timeout { fail "next to 1035(timeout)" }
+if ![gdb_skip_stdio_test "next to 1237"] {
+ gdb_test "next" \
+ "BYE BYE FOR NOW.*1237.*printf\\(.VERY GREEN GRASS.n.\\);.*" \
+ "next to 1237"
+} else {
+ gdb_test "next" ".*" ""
}
#call print_array_rep(\*list1, \*list2, \*list3)
-send_gdb "print print_array_rep(\*list1, \*list2, \*list3)\n"
-gdb_expect {
- -re ".*$gdb_prompt $" {
- pass "print print_array_rep(*list1, *list2, *list3)"
- }
- -re ".*$gdb_prompt $" { fail "print print_array_rep(*list1, *list2, *list3)" }
- timeout { fail "(timeout) print print_array_rep(*list1, *list2, *list3)" }
- }
-
-#go -until 1039
-gdb_test "tbreak 1039" \
- "Breakpoint..* file .*$srcfile, line 1039.*" \
- "tbreakpoint line 1039"
-
-send_gdb "continue\n"
-gdb_expect {
- -re ".*main \\(\\) at .*call-ar-st.c:1039\r\n1039\t\[ \]+sum_array_print\\(10, \\*list1, \\*list2, \\*list3, \\*list4\\);.*$gdb_prompt $" {
- pass "continue to 1039"}
- -re ".*$gdb_prompt $" { fail "continue to 1039"}
- timeout { fail "(timeout) continue to 1039"}
+if ![gdb_skip_stdio_test "print print_array_rep(...)"] {
+ gdb_test "print print_array_rep(\*list1, \*list2, \*list3)" \
+ "Contents of linked list3:.*" \
+ "print print_array_rep(*list1, *list2, *list3)"
}
+#go -until 1241
+gdb_test "tbreak 1241" \
+ "Temporary breakpoint..* file .*$srcfile, line 1241.*" \
+ "tbreakpoint line 1241"
+
+gdb_test "continue" \
+ "main \\(\\) at .*call-ar-st.c:1241\r\n1241\[\t \]+sum_array_print\\(10, \\*list1, \\*list2, \\*list3, \\*list4\\);.*" \
+ "continue to 1241"
# Run into sum_array_print, and verify that the arguments were passed
gdb_test "break sum_array_print" \
".*Breakpoint ${decimal}: file .*call-ar-st.c, line.*" \
"set breakpoint in sum_array_print"
+gdb_test_no_output "set print frame-arguments all"
gdb_test "continue" \
- ".*Breakpoint ${decimal}, sum_array_print \\(seed=10, linked_list1=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .4, 6, 8, 10, 12, 14, 16, 18, 20, 22., head = 0., linked_list2=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .8, 10, 12, 14, 16, 18, 20, 22, 24, 26., head = 0., linked_list3=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .10, 12, 14, 16, 18, 20, 22, 24, 26, 28., head = 0., linked_list4=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .20, 22, 24, 26, 28, 30, 32, 34, 36, 38., head = 0.\\) at .*call-ar-st.c:909\[ \t\n\r\]+909.*printf\\(.Sum of 4 arrays, by element \\(add in seed as well\\).*\\);.*" \
+ ".*Breakpoint ${decimal}, sum_array_print \\(seed=10, linked_list1=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .4, 6, 8, 10, 12, 14, 16, 18, 20, 22., head = 0., linked_list2=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .8, 10, 12, 14, 16, 18, 20, 22, 24, 26., head = 0., linked_list3=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .10, 12, 14, 16, 18, 20, 22, 24, 26, 28., head = 0., linked_list4=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .20, 22, 24, 26, 28, 30, 32, 34, 36, 38., head = 0.\\) at .*call-ar-st.c:1105\[ \t\n\r\]+1105.*printf\\(.Sum of 4 arrays, by element \\(add in seed as well\\).*\\);.*" \
"check args of sum_array_print"
#call print_array_rep(linked_list1, linked_list2, linked_list3)
#}
-#go -until 1079
-gdb_test "tbreak 1079" \
- "Breakpoint.* file .*call-ar-st.c, line 1079.*" \
- "tbreakpoint line 1079"
+#go -until 1281
+gdb_test "tbreak 1281" \
+ "Temporary breakpoint.* file .*call-ar-st.c, line 1281.*" \
+ "tbreakpoint line 1281"
-send_gdb "continue\n"
-gdb_expect {
- -re "Continuing\\..*Sum of 4 arrays.*Contents of linked list1.*Contents of two_floats_t.*main \\(\\) at .*call-ar-st.c:1079.*c = 0.*$gdb_prompt $" {
- pass "continue to 1079"}
- -re ".*$gdb_prompt $" { fail "continue to 1079"}
- timeout { fail "(timeout) continue to 1079"}
+if ![gdb_skip_stdio_test "continuing to 1281"] {
+ gdb_test "continue" \
+ "Continuing\\..*Sum of 4 arrays.*Contents of linked list1.*Contents of two_floats_t.*main \\(\\) at .*call-ar-st.c:1281.*c = 0.*" \
+ "continue to 1281"
+} else {
+ gdb_test "continue" ".*" ""
}
-#call print_small_structs(*struct1, *struct2, *struct3, *struct4,*flags, *flags_combo,
-#*three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)
-send_gdb "print print_small_structs(*struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)\n"
-gdb_expect {
- -re ".*alpha\[\t\r\n \]+gamma\[\t\r\n \]+epsilon\[\t\r\n \]+alpha\[\t\r\n \]+gamma\[\t\r\n \]+epsilon\[\t\r\n \]+ch1: y\tch2: n\[\t\r\n \]+Contents of three_char_t:\[\t\r\n \]+a\tb\tc\[\t\r\n \]+Contents of five_char_t:\[\t\r\n \]+l\tm\tn\to\tp\[\t\r\n \]+Contents of int_char_combo_t:\[\t\r\n \]+123.*z\[\t\r\n \]+Sum of the 4 struct values and seed :\[\t\r\n \]+52\[\t\r\n \]+Contents of struct1:\[\t\r\n \]+6.*0\[\t\r\n \]+Contents of struct2:\[\t\r\n \]+10.*0\[\t\r\n \]+Contents of struct3:\[\t\r\n \]+12.*0\[\t\r\n \]+Contents of one_double_t:\[\t\r\n \]+10.500000\[\t\r\n \]+Contents of one_double_t:.*-3.340000\[\t\r\n \]+Contents of one_double_t:.*675.091230\[\t\r\n \]+Contents of two_floats_t:.*45.234001.*43.599998\[\t\r\n \]+Contents of two_floats_t:.*78.010002.*122.099998\[\t\r\n \]+Contents of two_floats_t:.*-1232.344971.*-199.210007\[\t\r\n \]+.*$gdb_prompt $" {
- pass "print print_small_structs"
- }
- -re ".*$gdb_prompt $" { fail "print print_small_structs" }
- timeout { fail "(timeout) print_small_structs" }
- }
-
+#call print_small_structs(*struct1, *struct2, *struct3, *struct4,
+# *flags, *flags_combo, *three_char, *five_char,
+# *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)
+
+if {![gdb_skip_float_test "print print_small_structs(...)"] && \
+ ![gdb_skip_stdio_test "print print_small_structs(...)"] } {
+ gdb_test_sequence "print print_small_structs(*struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)" "print print_small_structs" {
+ "\[\t\r\n \]+alpha"
+ "\[\t\r\n \]+gamma"
+ "\[\t\r\n \]+epsilon"
+ "\[\t\r\n \]+alpha"
+ "\[\t\r\n \]+gamma"
+ "\[\t\r\n \]+epsilon"
+ "\[\t\r\n \]+ch1: y[ \t]*ch2: n"
+ "\[\t\r\n \]+Contents of three_char_t:"
+ "\[\t\r\n \]+a[ \t]*b[ \t]*c"
+ "\[\t\r\n \]+Contents of five_char_t:"
+ "\[\t\r\n \]+l[ \t]*m[ \t]*n[ \t]*o[ \t]*p"
+ "\[\t\r\n \]+Contents of int_char_combo_t:"
+ "\[\t\r\n \]+123[ \t]*z"
+ "\[\t\r\n \]+Sum of the 4 struct values and seed :"
+ "\[\t\r\n \]+52"
+ "\[\t\r\n \]+Contents of struct1:"
+ "\[\t\r\n \]+6[ \t]*0"
+ "\[\t\r\n \]+Contents of struct2:"
+ "\[\t\r\n \]+10[ \t]*0"
+ "\[\t\r\n \]+Contents of struct3:"
+ "\[\t\r\n \]+12[ \t]*0"
+ "\[\t\r\n \]+Contents of one_double_t:"
+ "\[\t\r\n \]+10.500000"
+ "\[\t\r\n \]+Contents of one_double_t:"
+ "\[\t\r\n \]+-3.375000"
+ "\[\t\r\n \]+Contents of one_double_t:"
+ "\[\t\r\n \]+675.093750"
+ "\[\t\r\n \]+Contents of two_floats_t:"
+ "\[\t\r\n \]+45.234001[ \t]*43.599998"
+ "\[\t\r\n \]+Contents of two_floats_t:"
+ "\[\t\r\n \]+78.010002[ \t]*122.099998"
+ "\[\t\r\n \]+Contents of two_floats_t:"
+ "\[\t\r\n \]+-1232.344971[ \t]*-199.210007"
+ }
+}
#call compute_with_small_structs(20)
-send_gdb "print compute_with_small_structs(20)\n"
-gdb_expect {
- -re ".*\[0-9\]+ =.*$gdb_prompt $" {
- pass "print compute_with_small_structs(20)"
- }
- -re ".*$gdb_prompt $" { fail "print compute_with_small_structs(20)" }
- timeout { fail "(timeout) compute_with_small_structs(20)" }
- }
-
-
-#call print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 3.14, -5678.12345, -0.11111111, 216.97065)
-send_gdb "print print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 3.14, -5678.12345, -0.11111111, 216.97065)\n"
-gdb_expect {
- -re ".*Two Doubles : 123.456000.*123.456000\[\t\r\n \]+Two Doubles : -0.120000.*-1.230000\[\t\r\n \]+Two Doubles : 343434.800000.*89.098000\[\t\r\n \]+Two Doubles : 3.140000.*-5678.123450\[\t\r\n \]+Two Doubles : -0.111111.*216.970650\[\t\r\n \]+.*$gdb_prompt $" {
- pass "print print_ten_doubles"
- }
- -re ".*$gdb_prompt $" { fail "print print_ten_doubles" }
- timeout { fail "(timeout) print_ten_doubles" }
- }
-
-#go -until 1084
-gdb_test "tbreak 1084" \
- "Breakpoint .* file .*call-ar-st.c, line 1084.*" \
- "tbreakpoint line 1084"
-
-gdb_test continue "Continuing\\..*main \\(.*\\) at.*call-ar-st.c:1084\[\t\r\n \]+1084.*print_long_arg_list \\( a, b, c, d, e, f, .struct1, .struct2, .struct3, .struct4,.*" "continue to 1084"
-
-
- send_gdb "step\n"
- gdb_expect {
- -re ".*print_long_arg_list \\(a=22.219999999999999, b=33.332999999999998, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.3399999999999999\}, d3=\{double1 = 675.09123\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at ${srcdir}/${subdir}/${srcfile}:813\[\r\n\]+813\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {pass "step into print_long_arg_list"}
- -re ".*$gdb_prompt $" { fail "step into print_long_arg_list" }
- timeout { fail "step into print_long_arg_list (timeout)" }
+gdb_test "print compute_with_small_structs(20)" \
+ "\[0-9\]+ = void" \
+ "print compute_with_small_structs(20)"
+
+
+#call print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098,
+# 3.14, -5678.12345, -0.11111111, 216.97065)
+
+if {![gdb_skip_float_test "print print_ten_doubles(...)"] && \
+ ![gdb_skip_stdio_test "print print_ten_doubles(...)"]} {
+ gdb_test_sequence "print print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 3.14, -5678.12345, -0.11111111, 216.97065)" "print print_ten_doubles" {
+ "\[\t\r\n \]+Two Doubles : 123.45\[0-9\]*.*123.45\[0-9\]*"
+ "\[\t\r\n \]+Two Doubles : -0.1200\[0-9\]*.*-1.2300\[0-9\]*"
+ "\[\t\r\n \]+Two Doubles : 343434.\[0-9\]*.*89.09\[0-9\]*"
+ "\[\t\r\n \]+Two Doubles : 3.1400\[0-9\]*.*-5678.123\[0-9\]*"
+ "\[\t\r\n \]+Two Doubles : -0.1111\[0-9\]*.*216.97\[0-9\]*"
}
+}
+#go -until 1286
+gdb_test "tbreak 1286" \
+ "Temporary breakpoint .* file .*call-ar-st.c, line 1286.*" \
+ "tbreakpoint line 1286"
+
+gdb_test continue "Continuing\\..*main \\(.*\\) at.*call-ar-st.c:1286\[\t\r\n \]+1286.*print_long_arg_list \\( a, b, c, d, e, f, .struct1, .struct2, .struct3, .struct4,.*" "continue to 1286"
+
+if { [istarget "hppa*-*-hpux*"] } {
+ #
+ # NOTE:(FIXME)
+ # the aCC demangler cannot demangle the name of a function with >10 args.
+ # so I added a .* after the name of the function, to match the
+ # incredibly long mangled name
+ # (getting aCC's libdemangle.a bundled w/ the system?)
+ # DTS CLLbs16994 coulter 990114
+ #
+ # FIXME: use step for hppa* testing for now
+ # guo 990621
+ #
+ gdb_test "step" \
+ "print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);" \
+ "step into print_long_arg_list"
+} else {
+
+ # We can't just assume that a "step" will get us into
+ # print_long_arg_list here,either.
+ gdb_test "tbreak print_long_arg_list" \
+ "Temporary breakpoint .* file .*call-ar-st.c, line .*" \
+ "tbreak in print_long_arg_list after stepping into memcpy"
+ # The short match case below handles cases where a buffer
+ # overflows or something, and expect can't deal with the full
+ # line. Perhaps a more elegant solution exists... -sts 1999-08-17
+ if {![gdb_skip_float_test "step into print_long_arg_list"]} {
+ gdb_test_multiple "continue" "step into print_long_arg_list" {
+ -re ".*print_long_arg_list \\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {
+ pass "step into print_long_arg_list"
+ }
+ -re ".*print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}.*\\) at .*${srcfile}:992\[\r\n\]+992\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" {
+ pass "step into print_long_arg_list (short match)"
+ }
+ }
+ } else {
+ # If skipping float tests, don't expect anything in arg list.
+ gdb_test "continue" \
+ "print_long_arg_list \\(.*\\).*" \
+ "step into print_long_arg_list"
+ }
+}
-#call print_small_structs(struct1, struct2, struct3, struct4, flags, flags_combo, three_char, five_char, int_char_combo, d1, d2, d3, f1, f2, f3)
-send_gdb "print print_small_structs(struct1, struct2, struct3, struct4, flags, flags_combo, three_char, five_char, int_char_combo, d1, d2, d3, f1, f2, f3)\n"
-gdb_expect {
- -re ".*alpha\[\t\r\n \]+gamma\[\t\r\n \]+epsilon\[\t\r\n \]+alpha\[\t\r\n \]+gamma\[\t\r\n \]+epsilon\[\t\r\n \]+ch1: y\tch2: n\[\t\r\n \]+Contents of three_char_t:\[\t\r\n \]+a\tb\tc\[\t\r\n \]+Contents of five_char_t:\[\t\r\n \]+l\tm\tn\to\tp\[\t\r\n \]+Contents of int_char_combo_t:\[\t\r\n \]+123.*z\[\t\r\n \]+Sum of the 4 struct values and seed :\[\t\r\n \]+52\[\t\r\n \]+Contents of struct1:\[\t\r\n \]+6.*0\[\t\r\n \]+Contents of struct2:\[\t\r\n \]+10.*0\[\t\r\n \]+Contents of struct3:\[\t\r\n \]+12.*0\[\t\r\n \]+Contents of one_double_t:\[\t\r\n \]+10.500000\[\t\r\n \]+Contents of one_double_t:\[\t\r\n \]+-3.340000\[\t\r\n \]+Contents of one_double_t:\[\t\r\n \]+675.091230\[\t\r\n \]+Contents of two_floats_t:\[\t\r\n \]+45.234001.*43.599998\[\t\r\n \]+Contents of two_floats_t:\[\t\r\n \]+78.010002.*122.099998\[\t\r\n \]+Contents of two_floats_t:\[\t\r\n \]+-1232.344971.*-199.210007\[\t\r\n \]+.*$gdb_prompt $" {
- pass "print print_small_structs from print_long_arg_list "
- }
- -re ".*$gdb_prompt $" { fail "print print_small_structs from print_long_arg_list" }
- timeout { fail "(timeout) print_small_structs from print_long_arg_list" }
- }
+set ws "\[\n\r\t \]+"
+#call print_small_structs(struct1, struct2, struct3, struct4, flags,
+# flags_combo, three_char, five_char, int_char_combo,
+# d1, d2, d3, f1, f2, f3)
+if {![gdb_skip_float_test "print_small_structs from print_long_arg_list"] && \
+ ![gdb_skip_stdio_test "print_small_structs from print_long_arg_list"] } {
-#go -until 1098
-gdb_test "tbreak 1098" \
- "Breakpoint.* file .*call-ar-st.c, line 1098.*" \
- "tbreakpoint line 1098"
+ # On 32-bit SPARC, some of the args are passed by ref, others by
+ # value, and GDB gets confused and says "Invalid cast" because it
+ # thinks it has to cast the structure into a pointer to structure.
+ if { [test_debug_format "stabs"] } then {
+ setup_kfail "gdb/1539" "sparc-*-*"
+ }
+
+ gdb_test_sequence "print print_small_structs(struct1, struct2, struct3, struct4, flags, flags_combo, three_char, five_char, int_char_combo, d1, d2, d3, f1, f2, f3)" "print print_small_structs from print_long_arg_list" {
+ "\[\t\r\n \]+alpha"
+ "\[\t\r\n \]+gamma"
+ "\[\t\r\n \]+epsilon"
+ "\[\t\r\n \]+alpha"
+ "\[\t\r\n \]+gamma"
+ "\[\t\r\n \]+epsilon"
+ "\[\t\r\n \]+ch1: y[ \t]*ch2: n"
+ "\[\t\r\n \]+Contents of three_char_t:"
+ "\[\t\r\n \]+a\[ \t\]*b\[ \t\]*c"
+ "\[\t\r\n \]+Contents of five_char_t:"
+ "\[\t\r\n \]+l\[ \t\]*m\[ \t\]*n\[ \t\]*o\[ \t\]*p"
+ "\[\t\r\n \]+Contents of int_char_combo_t:"
+ "\[\t\r\n \]+123\[ \t\]*z"
+ "\[\t\r\n \]+Sum of the 4 struct values and seed :"
+ "\[\t\r\n \]+52"
+ "\[\t\r\n \]+Contents of struct1:"
+ "\[\t\r\n \]+6\[ \t\]*0"
+ "\[\t\r\n \]+Contents of struct2:"
+ "\[\t\r\n \]+10\[ \t\]*0"
+ "\[\t\r\n \]+Contents of struct3:"
+ "\[\t\r\n \]+12\[ \t\]*0"
+ "\[\t\r\n \]+Contents of one_double_t:"
+ "\[\t\r\n \]+10.500000"
+ "\[\t\r\n \]+Contents of one_double_t:"
+ "\[\t\r\n \]+-3.375000"
+ "\[\t\r\n \]+Contents of one_double_t:"
+ "\[\t\r\n \]+675.093750"
+ "\[\t\r\n \]+Contents of two_floats_t:"
+ "\[\t\r\n \]+45.234001\[ \t\]*43.599998"
+ "\[\t\r\n \]+Contents of two_floats_t:"
+ "\[\t\r\n \]+78.010002\[ \t\]*122.099998"
+ "\[\t\r\n \]+Contents of two_floats_t:"
+ "\[\t\r\n \]+-1232.344971\[ \t\]*-199.210007"
+ }
+}
-gdb_test continue "Continuing\\..*Contents of two_floats_t:.*-1232.344971.*-199.210007.*main \\(\\) at.*call-ar-st.c:1098.*1098.*init_bit_flags_combo\\(flags_combo, \\(unsigned\\)1, \\(unsigned\\)0, .y.,.*" \
-"continue to 1098"
+#go -until 1300
+gdb_test "tbreak 1300" \
+ "Temporary breakpoint.* file .*call-ar-st.c, line 1300.*" \
+ "tbreakpoint line 1300"
+
+if ![gdb_skip_stdio_test "continuing to 1300"] {
+ gdb_test "continue" "Continuing\\..*Contents of two_floats_t:.*main \\(\\) at.*call-ar-st.c:1300.*1300.*init_bit_flags_combo\\(flags_combo, \\(unsigned\\)1, \\(unsigned\\)0, .y.,.*" \
+ "continue to 1300"
+} else {
+ gdb_test "continue" ".*" ""
+}
#step
- send_gdb "step\n"
- gdb_expect {
- -re "
-init_bit_flags_combo \\(bit_flags_combo=, a=1, b=0, ch1=121 .y., g=1, d=0, ch2=110 .n., e=1, o=0\\) at .*call-ar-st.c:385\[ \t\n\r\]+385.*bit_flags_combo->alpha = a;.*$gdb_prompt $" {
- pass "step into init_bit_flags_combo"}
- -re ".*$gdb_prompt $" { fail "step into init_bit_flags_combo" }
- timeout { fail "step into init_bit_flags_combo (timeout)" }
- }
+gdb_test "step" \
+ "init_bit_flags_combo \\(bit_flags_combo=, a=1, b=0, ch1=121 .y., g=1, d=0, ch2=110 .n., e=1, o=0\\) at .*call-ar-st.c:416\[ \t\n\r\]+416.*bit_flags_combo->alpha = a;" \
+ "step into init_bit_flags_combo"
#call print_bit_flags_combo(*bit_flags_combo)
-send_gdb "print print_bit_flags_combo(*bit_flags_combo)\n"
-gdb_expect {
- -re ".*alpha.*gamma.*epsilon.*ch1: y\tch2: n.*$gdb_prompt $" {
- pass "print print_bit_flags_combo from init_bit_flags_combo"
- }
- -re ".*$gdb_prompt $" { fail "print print_bit_flags_combo from init_bit_flags_combo" }
- timeout { fail "(timeout) print_bit_flags_combo from init_bit_flags_combo" }
- }
+if ![gdb_skip_stdio_test "continuing to 1300"] {
+ gdb_test "print print_bit_flags_combo(*bit_flags_combo)" \
+ "alpha.*gamma.*epsilon.*ch1: y.*ch2: n.*" \
+ "print print_bit_flags_combo from init_bit_flags_combo"
+}
-#go -until 1103
-gdb_test "tbreak 1103" \
- "Breakpoint.* file .*call-ar-st.c, line 1103.*" \
- "tbreakpoint line 1103"
+#go -until 1305
+gdb_test "tbreak 1305" \
+ "Temporary breakpoint.* file .*call-ar-st.c, line 1305.*" \
+ "tbreakpoint line 1305"
-gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1103\[\r\n\t \]+1103.*init_int_char_combo\\(int_char_combo, 13, .!.\\);" \
-"continue to 1103"
+gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1305\[\r\n\t \]+1305.*init_int_char_combo\\(int_char_combo, 13, .!.\\);" \
+"continue to 1305"
#call print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)
-send_gdb "print print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)\n"
-gdb_expect {
- -re ".*double : 22.220000.*double : 33.333000.*int : 0.*int : -25.*int : 100.*int : 2345.*alpha.*gamma.*epsilon.*ch1: y\tch2: n.*Contents of three_char_t:.*x\ty\tz.*Contents of five_char_t:.*h\te\tl\tl\to.*Contents of int_char_combo_t:.*123\tz.*Sum of the 4 struct values and seed :.*52.*Contents of struct1:.*6\[ \]+0.*Contents of struct2:.*10\[ \]+0.*Contents of struct3:.*12.*0.*Contents of one_double_t:\[ \n\r\t\]+1.111110\[ \n\r\t\]+Contents of one_double_t:\[ \n\r\t\]+-345.340000\[ \n\r\t\]+Contents of one_double_t:\[ \n\r\t\]+546464.200000\[ \n\r\t\]+Contents of two_floats_t:\[ \n\r\t\]+0.234000\t453.100006\[ \n\r\t\]+Contents of two_floats_t:\[ \n\r\t\]+78.345001\t23.090000\[ \n\r\t\]+Contents of two_floats_t:\[ \n\r\t\]+-2.345000\t1.000000.*$gdb_prompt $" {
- pass "print print_long_arg_list"
- }
- -re ".*$gdb_prompt $" { fail "print print_long_arg_list" }
- timeout { fail "(timeout) print_long_arg_list" }
- }
+# FIXME:
+# HP aCC demangler currently does not handle hp aCC functions with >10 args
+# DTS CLLbs16994 coulter 990114
+
+if {$hp_aCC_compiler} {setup_xfail "hppa*-*-*" CLLbs16994}
+
+if {![gdb_skip_float_test "print print_long_arg_list"] && \
+ ![gdb_skip_stdio_test "print print_long_arg_list"] } {
+ gdb_test_sequence "print print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)" "print print_long_arg_list" {
+ "\[ \n\r\t\]+double : 22.250000"
+ "\[ \n\r\t\]+double : 33.375000"
+ "\[ \n\r\t\]+int : 0"
+ "\[ \n\r\t\]+int : -25"
+ "\[ \n\r\t\]+int : 100"
+ "\[ \n\r\t\]+int : 2345"
+ "\[ \n\r\t\]+alpha"
+ "\[ \n\r\t\]+gamma"
+ "\[ \n\r\t\]+epsilon"
+ "\[ \n\r\t\]+ch1: y\[ \t\]+ch2: n"
+ "\[ \n\r\t\]+Contents of three_char_t:"
+ "\[ \n\r\t\]+x\[ \t\]+y\[ \t\]+z"
+ "\[ \n\r\t\]+Contents of five_char_t:"
+ "\[ \n\r\t\]+h\[ \t\]+e\[ \t\]+l\[ \t\]+l\[ \t\]+o"
+ "\[ \n\r\t\]+Contents of int_char_combo_t:"
+ "\[ \n\r\t\]+123\[ \t\]+z"
+ "\[ \n\r\t\]+Sum of the 4 struct values and seed :"
+ "\[ \n\r\t\]+52"
+ "\[ \n\r\t\]+Contents of struct1:"
+ "\[ \n\r\t\]+6\[ \t\]+0"
+ "\[ \n\r\t\]+Contents of struct2:"
+ "\[ \n\r\t\]+10\[ \t\]+0"
+ "\[ \n\r\t\]+Contents of struct3:"
+ "\[ \n\r\t\]+12\[ \t\]+0"
+ "\[ \n\r\t\]+Contents of one_double_t:"
+ "\[ \n\r\t\]+1.111110"
+ "\[ \n\r\t\]+Contents of one_double_t:"
+ "\[ \n\r\t\]+-345.340000"
+ "\[ \n\r\t\]+Contents of one_double_t:"
+ "\[ \n\r\t\]+546464.200000"
+ "\[ \n\r\t\]+Contents of two_floats_t:"
+ "\[ \n\r\t\]+0.234000\[ \t\]+453.100006"
+ "\[ \n\r\t\]+Contents of two_floats_t:"
+ "\[ \n\r\t\]+78.345001\[ \t\]+23.090000"
+ "\[ \n\r\t\]+Contents of two_floats_t:"
+ "\[ \n\r\t\]+-2.345000\[ \t\]+1.000000"
+ }
+}
-#go -until 1109
-gdb_test "tbreak 1109" \
- "Breakpoint.* file .*call-ar-st.c, line 1109.*" \
- "tbreakpoint line 1109"
-gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1109\[ \t\n\r\]+1109.*compute_with_small_structs\\(35\\);" \
-"continue to 1109"
+#go -until 1311
+gdb_test "tbreak 1311" \
+ "Temporary breakpoint.* file .*call-ar-st.c, line 1311.*" \
+ "tbreakpoint line 1311"
+
+gdb_test continue "Continuing\\..*main \\(\\) at .*call-ar-st.c:1311\[ \t\n\r\]+1311.*compute_with_small_structs\\(35\\);" \
+"continue to 1311"
#call sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)
-send_gdb "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)\n"
-gdb_expect {
- -re ".*Sum of the 4 struct values and seed :\[ \t\n\r\]+218.*$gdb_prompt $" {
- pass "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)"
- }
- -re ".*$gdb_prompt $" { fail "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)" }
- timeout { fail "(timeout) sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)" }
- }
+if ![gdb_skip_stdio_test "print sum_struct_print(...)"] {
+ gdb_test "print sum_struct_print(10,*struct1,*struct2,*struct3,*struct4)" \
+ "Sum of the 4 struct values and seed :\[ \t\n\r\]+218.*" \
+ "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)"
+}
#call print_struct_rep(*struct1, *struct2, *struct3)
-send_gdb "print print_struct_rep(*struct1, *struct2, *struct3)\n"
-gdb_expect {
- -re ".*Contents of struct1:\[ \t\n\r\]+ 22 0\[ \t\n\r\]+Contents of struct2:\[ \t\n\r\]+ 42 0\[ \t\n\r\]+Contents of struct3:\[ \t\n\r\]+ 62 0\[ \t\n\r\]+.*$gdb_prompt $" {
- pass "print print_struct_rep(*struct1, *struct2, *struct3)"
- }
- -re ".*$gdb_prompt $" { fail "print print_struct_rep(*struct1, *struct2, *struct3)" }
- timeout { fail "(timeout) print_struct_rep(*struct1, *struct2, *struct3)" }
- }
-
-send_gdb "print print_one_large_struct(*list1)\n"
-gdb_expect {
- -re ".* 4 1.*$gdb_prompt $" {
- pass "print print_one_large_struct(*list1)"
- }
- -re ".*$gdb_prompt $" { fail "print print_one_large_struct(*list1)" }
- timeout { fail "(timeout) print_one_large_struct(*list1)" }
- }
+if ![gdb_skip_stdio_test "print print_struct_rep(...)"] {
+ gdb_test_sequence "print print_struct_rep(*struct1, *struct2, *struct3)" \
+ "print print_struct_rep(*struct1, *struct2, *struct3)" {
+ "\[ \t\n\r\]+Contents of struct1:"
+ "\[ \t\n\r\]+ 22 0"
+ "\[ \t\n\r\]+Contents of struct2:"
+ "\[ \t\n\r\]+ 42 0"
+ "\[ \t\n\r\]+Contents of struct3:"
+ "\[ \t\n\r\]+ 62 0"
+ }
+}
+
+if ![gdb_skip_stdio_test "print print_one_large_struct(...)"] {
+ gdb_test "print print_one_large_struct(*list1)" \
+ " 4 1.*" \
+ "print print_one_large_struct(*list1)"
+}
+set timeout $oldtimeout
return
-~