-# Copyright (C) 1998 Free Software Foundation, Inc.
+# Copyright 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2007, 2008, 2009
+# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
-#
+#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-#
+#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-gdb@prep.ai.mit.edu
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# This file was written by Elena Zannoni (ezannoni@cygnus.com)
set binfile ${objdir}/${subdir}/${testfile}
-if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
- gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
- }
+# Test depends on printf, which the sparclet stub doesn't support.
+if { [istarget "sparclet-*-*"] } {
+ return 0;
+}
+
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug nowarnings}] != "" } {
+ untested "couldn't compile ${srcdir}/${subdir}/${srcfile}"
+ return -1
+}
return -1;
}
-# The a29k can't call functions, so don't even bother with this test.
+# Some targets can't do function calls, so don't even bother with this
+# test.
if [target_info exists gdb,cannot_call_functions] {
setup_xfail "*-*-*" 2416
fail "This target can not call functions"
}
}
-
-
-source ${binfile}.ci
-
-
# Start with a fresh gdb.
gdb_exit
gdb_test "break loop_count" \
- "Breakpoint.* file .*call-rt-st.c, line 106\\." \
+ "Breakpoint.* file .*call-rt-st.c, line 128\\." \
"breakpoint loop_count"
send_gdb "continue\n"
gdb_expect {
- -re "Continuing\\..*Breakpoint.*loop_count \\(\\) at.*call-rt-st.c:106\[ \t\r\n\]+106\[\t \]+for \\(index=0; index.4; index..\\);\[\r\n \]+$gdb_prompt $" {
+ -re "Continuing\\..*Breakpoint.*loop_count \\(\\) at.*call-rt-st.c:128\[ \t\r\n\]+128\[\t \]+for \\(index=0; index.4; index..\\);\[\r\n \]+$gdb_prompt $" {
pass "continue to loop_count"}
-re ".*$gdb_prompt $" { fail "continue to loop_count"}
timeout { fail "(timeout) continue to loop_count"}
send_gdb "finish\n"
gdb_expect {
- -re "Run till exit from .0 loop_count \\(\\) at.*call-rt-st.c:106\[ \t\r\n\]+main \\(\\) at.*call-rt-st.c:617\[ \t\r\n\]+617\[\t \]+return 0;.*$gdb_prompt $" {
- pass "finish out from loop_count (line 617)"}
- -re "Run till exit from .0 loop_count \\(\\) at.*call-rt-st.c:106\[ \t\r\n\]+main \\(\\) at.*call-rt-st.c:615\[ \t\r\n\]+615\[\t \]+loop_count.*$gdb_prompt $" {
- pass "finish out from loop_count (line 615)"}
- -re ".*$gdb_prompt $" { fail "finish out from loop_count"}
- timeout { fail "(timeout)finish out from loop_count"}
-}
-
-
-send_gdb "print print_struct_rep(*struct1)\n"
-gdb_expect {
- -re ".*Contents of struct1:\[ \t\n\r\]+22\[ \t\]+0\[ \t\n\r\]+.\[0-9\]+ = \{value = 5, head = 0\}.*$gdb_prompt $" {
- pass "print print_struct_rep(*struct1, *struct2, *struct3)"
- }
- -re ".*$gdb_prompt $" { fail "print print_struct_rep(*struct1, *struct2, *struct3)" }
- timeout { fail "(timeout) print_struct_rep(*struct1, *struct2, *struct3)" }
- }
-
-send_gdb "print print_one_large_struct(*list1)\n"
-gdb_expect {
- -re ".*\[ \t\]+4\[ \t\]+1\[ \r\n\]+.\[0-9\]+ = \{next_index = \{1, 2, 3, 4, 5, 6, 7, 8, 9, 10\}, values = \{4, 6, 8, 10, 12, 14, 16, 18, 20, 22\}, head = 0\}.*$gdb_prompt $" {
- pass "print print_one_large_struct(*list1)"
- }
- -re ".*$gdb_prompt $" { fail "print print_one_large_struct(*list1)" }
- timeout { fail "(timeout) print_one_large_struct(*list1)" }
- }
-
-if {![target_info exists gdb,skip_float_tests]} {
- send_gdb "print print_one_double(*d1)\n"
- gdb_expect {
- -re ".*Contents of one_double_t:\[ \r\n\]+1\\.111110\[ \r\n\]+.\[0-9\]+ = \{double1 = 1\\.11111\}.*$gdb_prompt $" {
- pass "print print_one_double(*d1)"
+ -re "Run till exit from .0 loop_count \\(\\) at.*call-rt-st.c:128\[ \t\r\n\]+main \\(\\) at.*call-rt-st.c:777\[ \t\r\n\]+777\[\t \]+return 0;.*$gdb_prompt $" {
+ pass "finish out from loop_count (line 777)"
+ }
+ -re "Run till exit from .0 loop_count \\(\\) at.*call-rt-st.c:128\[ \t\r\n\]+main \\(\\) at.*call-rt-st.c:775\[ \t\r\n\]+775\[\t \]+loop_count.*$gdb_prompt $" {
+ pass "finish out from loop_count (line 775)"
}
- -re ".*$gdb_prompt $" { fail "print print_one_double(*d1)" }
- timeout { fail "(timeout) print_one_double(*d1)" }
- }
-
- send_gdb "print print_two_floats(*f3)\n"
- gdb_expect {
- -re ".*Contents of two_floats_t:\[ \r\n\]+-2\\.345000\[ \t]+1\\.000000\[ \r\n\]+.\[0-9\]+ = \{float1 = -2\\.34500003, float2 = 1\}.*$gdb_prompt $" {
- pass "print print_two_floats(*f3)"
+ -re ".*$gdb_prompt $" {
+ fail "finish out from loop_count"
+ }
+ timeout {
+ fail "finish out from loop_count (timeout)"
}
- -re ".*$gdb_prompt $" { fail "print print_two_floats(*f3)" }
- timeout { fail "(timeout) print_two_floats(*f3)" }
- }
}
-send_gdb "print print_bit_flags(*flags)\n"
-gdb_expect {
- -re ".*alpha\[ \r\n\]+gamma\[ \r\n\]+epsilon\[ \r\n\]+.\[0-9\]+ = \{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}\[ \r\n\]+$gdb_prompt $" {
- pass "print print_bit_flags(*flags)"
- }
- -re ".*$gdb_prompt $" { fail "print print_bit_flags(*flags)" }
- timeout { fail "(timeout) print_bit_flags(*flags)" }
- }
-
-send_gdb "print print_bit_flags_combo(*flags_combo)\n"
-gdb_expect {
- -re ".*alpha\[ \r\n\]+gamma\[ \r\n\]+epsilon\[ \r\n\]+ch1: y\[ \t\]+ch2: n\[ \r\n\]+.\[0-9\]+ = \{alpha = 1, beta = 0, ch1 = 121 'y', gamma = 1, delta = 0, ch2 = 110 'n', epsilon = 1, omega = 0\}\[ \r\n\]+$gdb_prompt $" {
- pass "print print_bit_flags_combo(*flags_combo)"
- }
- -re ".*$gdb_prompt $" { fail "print print_bit_flags_combo(*flags_combo)" }
- timeout { fail "(timeout) print_bit_flags_combo(*flags_combo)" }
- }
-
-send_gdb "print print_three_chars(*three_char)\n"
-gdb_expect {
- -re ".*Contents of three_char_t:\[ \r\n\]+x\[ \t\]+y\[ \t\]+z\[ \r\n\]+.\[0-9\]+ = \{ch1 = 120 'x', ch2 = 121 'y', ch3 = 122 'z'\}\[ \r\n\]+$gdb_prompt $" {
- pass "print print_three_chars(*three_char)"
- }
- -re ".*$gdb_prompt $" { fail "print print_three_chars(*three_char)" }
- timeout { fail "(timeout) print_three_chars(*three_char)" }
- }
-
-send_gdb "print print_five_chars(*five_char)\n"
-gdb_expect {
- -re ".*Contents of five_char_t:\[ \r\n\]+h\[ \t\]+e\[ \t\]+l\[ \t\]+l\[ \t\]+o\[ \r\n\]+.\[0-9\]+ = \{ch1 = 104 'h', ch2 = 101 'e', ch3 = 108 'l', ch4 = 108 'l', ch5 = 111 'o'\}\[ \r\n\]+$gdb_prompt $" {
- pass "print print_five_chars(*five_char)"
- }
- -re ".*$gdb_prompt $" { fail "print print_five_chars(*five_char)" }
- timeout { fail "(timeout) print_five_chars(*five_char)" }
- }
-
-send_gdb "print print_int_char_combo(*int_char_combo)\n"
-gdb_expect {
- -re ".*Contents of int_char_combo_t:\[ \r\n\]+13\[ \t\]+!\[ \r\n\]+.\[0-9\]+ = \{int1 = 13, ch1 = 33 '!'\}\[ \r\n\]+$gdb_prompt $" {
- pass "print print_int_char_combo(*int_char_combo)"
- }
- -re ".*$gdb_prompt $" { fail "print print_int_char_combo(*int_char_combo)" }
- timeout { fail "(timeout) print_int_char_combo(*int_char_combo)" }
- }
-
-return
-
+# Ask GDB to print the value of EXPR, and expect to see the regexp
+# RESULT in the output. If we get back the error message "Function
+# return value unknown", call that an `unsupported' test; on some
+# architectures, it's impossible to find structs returned by value
+# reliably.
+proc print_struct_call { expr result } {
+ global gdb_prompt
+ set command "print $expr"
+ send_gdb "${command}\n"
+ gdb_expect {
+ -re "$result\[\r\n\]+$gdb_prompt $" {
+ pass "$command"
+ }
+ -re "Function return value unknown.\[\r\n\]+$gdb_prompt $" {
+ unsupported "$command"
+ }
+ -re "$gdb_prompt $" {
+ fail "$command"
+ }
+ timeout {
+ fail "$command (timeout)"
+ }
+ }
+}
+if ![gdb_skip_stdio_test "print print_struct_rep(*struct1)"] {
+ print_struct_call "print_struct_rep(*struct1)" \
+ ".*Contents of struct1:\[ \t\n\r\]+22\[ \t\]+0\[ \t\n\r\]+.\[0-9\]+ = \\{value = 5, head = 0\\}"
+}
+if ![gdb_skip_stdio_test "print print_one_large_struct(...)"] {
+ print_struct_call "print_one_large_struct(*list1)" \
+ ".*\[ \t\]+4\[ \t\]+1\[ \r\n\]+.\[0-9\]+ = \\{next_index = \\{1, 2, 3, 4, 5, 6, 7, 8, 9, 10\\}, values = \\{4, 6, 8, 10, 12, 14, 16, 18, 20, 22\\}, head = 0\\}"
+}
+if {![gdb_skip_float_test "print print_one_double(*d1)"] && \
+ ![gdb_skip_stdio_test "print print_one_double(*d1)"] } {
+ print_struct_call "print_one_double(*d1)" \
+ ".*Contents of one_double_t:\[ \r\n\]+1\\.111110\[ \r\n\]+.\[0-9\]+ = \\{double1 = 1\\.111\[0-9\]*\\}"
+}
+if {![gdb_skip_float_test "print print_two_floats(*f3)"] && \
+ ![gdb_skip_stdio_test "print print_two_floats(*f3)"] } {
+ print_struct_call "print_two_floats(*f3)" \
+ ".*Contents of two_floats_t:\[ \r\n\]+-2\\.345000\[ \t]+1\\.000000\[ \r\n\]+.\[0-9\]+ = \\{float1 = -2\\.34500003, float2 = 1\\}"
+}
+if ![gdb_skip_stdio_test "print print_bit_flags_char(*cflags)"] {
+ print_struct_call "print_bit_flags_char(*cflags)" \
+ ".*alpha\[ \r\n\]+gamma\[ \r\n\]+epsilon\[ \r\n\]+.\[0-9\]+ = \\{alpha = 1 '\\\\1', beta = 0 '\\\\0', gamma = 1 '\\\\1', delta = 0 '\\\\0', epsilon = 1 '\\\\1', omega = 0 '\\\\0'\\}"
+}
+if ![gdb_skip_stdio_test "print print_bit_flags_short(*sflags)"] {
+ print_struct_call "print_bit_flags_short(*sflags)" \
+ ".*alpha\[ \r\n\]+gamma\[ \r\n\]+epsilon\[ \r\n\]+.\[0-9\]+ = \\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\\}"
+}
+if ![gdb_skip_stdio_test "print print_bit_flags(*flags)"] {
+ print_struct_call "print_bit_flags(*flags)" \
+ ".*alpha\[ \r\n\]+gamma\[ \r\n\]+epsilon\[ \r\n\]+.\[0-9\]+ = \\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\\}"
+}
+if ![gdb_skip_stdio_test "print print_bit_flags_combo(*flags_combo)"] {
+ print_struct_call "print_bit_flags_combo(*flags_combo)" \
+ ".*alpha\[ \r\n\]+gamma\[ \r\n\]+epsilon\[ \r\n\]+ch1: y\[ \t\]+ch2: n\[ \r\n\]+.\[0-9\]+ = \\{alpha = 1, beta = 0, ch1 = 121 'y', gamma = 1, delta = 0, ch2 = 110 'n', epsilon = 1, omega = 0\\}"
+}
+if ![gdb_skip_stdio_test "print print_three_chars(*three_chars)"] {
+ print_struct_call "print_three_chars(*three_char)" \
+ ".*Contents of three_char_t:\[ \r\n\]+x\[ \t\]+y\[ \t\]+z\[ \r\n\]+.\[0-9\]+ = \\{ch1 = 120 'x', ch2 = 121 'y', ch3 = 122 'z'\\}"
+}
+if ![gdb_skip_stdio_test "print print_five_chars(*five_chars)"] {
+ print_struct_call "print_five_chars(*five_char)" \
+ ".*Contents of five_char_t:\[ \r\n\]+h\[ \t\]+e\[ \t\]+l\[ \t\]+l\[ \t\]+o\[ \r\n\]+.\[0-9\]+ = \\{ch1 = 104 'h', ch2 = 101 'e', ch3 = 108 'l', ch4 = 108 'l', ch5 = 111 'o'\\}"
+}
+if ![gdb_skip_stdio_test "print print_int_char_combo(*int_char_combo)"] {
+ print_struct_call "print_int_char_combo(*int_char_combo)" \
+ ".*Contents of int_char_combo_t:\[ \r\n\]+13\[ \t\]+!\[ \r\n\]+.\[0-9\]+ = \\{int1 = 13, ch1 = 33 '!'\\}"
+}
+return