-# Copyright 1997, 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+# This testcase is part of GDB, the GNU debugger.
+
+# Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2007, 2008, 2009,
+# 2010 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
-#
+#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-#
+#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-gdb@prep.ai.mit.edu
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# use this to debug:
#
# ending-run.exp -- Expect script to test ending a test run in gdb
-if $tracelevel then {
- strace $tracelevel
+if { [prepare_for_testing ending-run.exp ending-run] } {
+ return -1
}
-
-set testfile ending-run
-set srcfile ${testfile}.c
-set binfile ${objdir}/${subdir}/${testfile}
-
-remote_exec build "rm -f ${binfile}"
remote_exec build "rm -f core"
-
-if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
- gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
-}
-
-
-
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
-
# CHFts23469: Test that you can "clear" a bp set at
# a line _before_ the routine (which will default to the
# first line in the routine, which turns out to correspond
gdb_test "b ending-run.c:1" ".*Breakpoint.*ending-run.c, line 1.*" \
"bpt at line before routine"
-gdb_test "b ending-run.c:13" \
- ".*Note.*also.*Breakpoint 2.*ending-run.c, line 13.*" \
- "b ending-run.c:13, one"
+gdb_test "b ending-run.c:14" \
+ ".*Note.*also.*Breakpoint 2.*ending-run.c, line 14.*" \
+ "b ending-run.c:14, one"
# Set up to go to the next-to-last line of the program
#
# Expect to hit the bp at line "1", but symbolize this
# as line "13". Then try to clear it--this should work.
#
-if [target_info exists use_gdb_stub] {
- gdb_test "continue" ".*Breakpoint.*1.*callee.*13.*"
-} else {
- gdb_test "r" ".*Breakpoint.*1.*callee.*13.*"
-}
-gdb_test "cle" ".*Deleted breakpoints 2 1.*" "clear worked"
+gdb_run_cmd
+gdb_test "" ".*Breakpoint.*1.*callee.*14.*" "run"
+
+gdb_test "cle" ".*Deleted breakpoints 1 2.*" "clear worked"
send_gdb "i b\n"
gdb_expect {
- -re ".*breakpoint.*breakpoint.*$gdb_prompt $" { fail "clear bp" }
- -re ".*3.*main.*31.*$gdb_prompt $" { pass "cleared bp at line before routine" }
- -re ".*$gdb_prompt $" { fail "info b" }
+ -re ".* breakpoint .* breakpoint .*$gdb_prompt $" {
+ fail "cleared bp at line before routine"
+ }
+ -re ".*3.*main.*31.*$gdb_prompt $" {
+ pass "cleared bp at line before routine"
+ }
+ -re ".*$gdb_prompt $" {
+ fail "cleared bp at line before routine (info b)"
+ }
}
# Test some other "clear" combinations
#
gdb_test "b ending-run.c:1" ".*Breakpoint.*4.*"
-gdb_test "b ending-run.c:13" ".*Note.*also.*Breakpoint.*5.*" "b ending-run.c:13, two"
-gdb_test "cle ending-run.c:13" \
- ".*Deleted breakpoint 5.*" "Only cleared 1 by line"
-
-send_gdb "inf line ending-run.c:13\n"
-gdb_expect {
- -re ".*address (0x\[0-9a-fA-F]*).*$gdb_prompt $" {
- set line_eight $expect_out(1,string)
- gdb_test "b 13" ".*Breakpoint.*6.*"
- gdb_test "cle *$line_eight" ".*Deleted breakpoints 6 4.*" "Clear 2 by address"
- }
- -re ".*$gdb_prompt $" {
- fail "need to fix test for new compile outcome"
- }
-}
+gdb_test "b ending-run.c:14" ".*Note.*also.*Breakpoint.*5.*" "b ending-run.c:14, two"
+gdb_test "cle ending-run.c:14" \
+ ".*Deleted breakpoint 5.*" "Cleared 2 by line"
-send_gdb "inf line ending-run.c:14\n"
+send_gdb "info line ending-run.c:14\n"
gdb_expect {
-re ".*address (0x\[0-9a-fA-F]*).*$gdb_prompt $" {
set line_nine $expect_out(1,string)
- gdb_test "b ending-run.c:14" ".*Breakpoint 7.*ending-run.c, line 14.*"
- gdb_test "b *$line_nine" ".*Note.*also.*Breakpoint 8.*"
- gdb_test "c" ".*Breakpoint.*7.*callee.*14.*"
- gdb_test "cle" ".*Deleted breakpoints 8 7.*" "Clear 2 by default"
+ gdb_test "b ending-run.c:14" ".*Breakpoint 6.*ending-run.c, line 14.*"
+ gdb_test "b *$line_nine" ".*Note.*also.*Breakpoint 7.*" "Breakpoint 7 at *ending-run.c:14"
+ gdb_test "cle" ".*Deleted breakpoints 4 6 7.*" "Clear 2 by default"
}
-re ".*$gdb_prompt $" {
fail "need to fix test for new compile outcome"
send_gdb "i b\n"
gdb_expect {
- -re ".*breakpoint.*breakpoint.*$gdb_prompt $" {
- fail "didn't clear bps"
+ -re ".* breakpoint .* breakpoint .*$gdb_prompt $" {
+ fail "all set to continue (didn't clear bps)"
}
-re ".*3.*main.*31.*$gdb_prompt $" {
pass "all set to continue"
}
-re ".*$gdb_prompt $" {
- fail "missing bp at end"
+ fail "all set to continue (missing bp at end)"
}
}
set timeout 50
set program_exited 0
send_gdb "next\n"
+set nexted 0
gdb_expect {
- -re "33.*$gdb_prompt $" {
+ -re "33\[ \t\]+\}.*$gdb_prompt $" {
# sometimes we stop at the closing brace, if so, do another next
- send_gdb "next\n"
- gdb_expect {
- -re ".*Unable to find return pc for this frame.*$gdb_prompt $" {
- fail "Old bug came back!"
- gdb_test "n" ".*" ""
- }
- -re ".*in.*start.*$gdb_prompt $" {
- pass "step out of main"
- }
- -re ".*in.*bsp_trap.*$gdb_prompt $" {
- pass "step out of main"
- }
- -re ".*in.*init.*$gdb_prompt $" {
- # This is what happens on sparc64-elf ultra.
- pass "step out of main"
- }
- -re ".*Program exited normally.*$gdb_prompt $" {
- # This is what happens on Linux i86 (and I would expect others)
- set program_exited 1
- pass "step out of main"
- }
- -re ".*in .nope ().*$gdb_prompt $" {
- # This is what happens on Solaris currently -sts 1999-08-25
- pass "step out of main on Solaris"
- }
- -re ".*in _int_reset ().*$gdb_prompt $" {
- # This is what happens on Sanyo XStormy16
- pass "step out of main"
- }
- -re ".*in ..change.mode ().*$gdb_prompt $" {
- # This is what happens on ARM in thumb mode -fn 2000-02-01
- pass "step out of main on ARM thumb"
- }
- -re ".*in.*\\\$START\\\$.*from.*dld.sl.*$gdb_prompt $" {
- pass "step out of main"
- }
- -re ".*$gdb_prompt $" { fail "step at end 2" }
- timeout { fail "hang or timeout on step at end 2" }
+ if { $nexted } {
+ fail "step out of main"
+ } else {
+ set nexted 1
+ send_gdb "next\n"
+ exp_continue
}
}
-re ".*Unable to find return pc for this frame.*$gdb_prompt $" {
- fail "Old bug came back!"
- gdb_test "n" ".*" ""
+ fail "step out of main"
+ gdb_test "n" ".*" ""
}
-re ".*in.*start.*$gdb_prompt $" {
- pass "step out of main"
+ pass "step out of main"
+ }
+ -re ".*in.*bsp_trap.*$gdb_prompt $" {
+ pass "step out of main"
+ }
+ -re ".*in.*init.*$gdb_prompt $" {
+ # This is what happens on sparc64-elf ultra.
+ pass "step out of main"
}
- -re ".*in.*\\\$START\\\$.*from.*dld.sl.*$gdb_prompt $" {
- pass "step out of main 2"
+ -re ".*in.*dll_crt0_1.*$gdb_prompt $" {
+ # This is what happens on Cygwin.
+ pass "step out of main"
+ }
+ -re ".*WinMain.*$gdb_prompt $" {
+ # This is what happens on mingw32ce.
+ pass "step out of main"
}
-re ".*Program exited normally.*$gdb_prompt $" {
# This is what happens on Linux i86 (and I would expect others)
set program_exited 1
pass "step out of main"
}
+ -re ".*in .nope ().*$gdb_prompt $" {
+ # This is what happens on Solaris currently -sts 1999-08-25
+ pass "step out of main"
+ }
+ -re ".*in _int_reset ().*$gdb_prompt $" {
+ # This is what happens on Sanyo XStormy16
+ pass "step out of main"
+ }
+ -re ".*init ().*$gdb_prompt $" {
+ # This is what happens on many Mips targets
+ pass "step out of main"
+ }
+ -re ".*in ..change.mode ().*$gdb_prompt $" {
+ # This is what happens on ARM in thumb mode -fn 2000-02-01
+ pass "step out of main"
+ }
+ -re ".*__rt_entry ().*$gdb_prompt $" {
+ # This is what happens on the ARM RVDS runtime
+ pass "step out of main"
+ }
+ -re ".*in.*\\\$START\\\$.*from.*dld.sl.*$gdb_prompt $" {
+ pass "step out of main"
+ }
+ -re ".*in __wrap__?main ().*$gdb_prompt $" {
+ pass "step out of main"
+ }
+ -re "__setup_argv_for_main (.*).*$gdb_prompt $" {
+ # On sh, another wrapper function (start_l) exists, so
+ # another `next' is necessary.
+ gdb_test "next" ".*in start_l ().*" "step out of main"
+ }
+ -re "E32Main (.*).*$gdb_prompt $" {
+ # On SymbianOS there's a different function which calls main.
+ pass "step out of main"
+ }
-re ".*in.*currently asm.*$gdb_prompt $" {
- pass "step out of main into assembler"
+ pass "step out of main"
+ }
+ -re "_*start\[0-9\]* \\(\[^)\]*\\).*$gdb_prompt $" {
+ pass "step out of main"
}
-re ".*Program received signal SIGTRAP.*$gdb_prompt $" {
- pass "Cygmon stopped in ending trap."
+ pass "step out of main"
}
- -re ".*$gdb_prompt $" { fail "step at end 1" }
- timeout { fail "hang or timeout on step at end 1" }
+ -re ".*$gdb_prompt $" { fail "step out of main" }
+ timeout { fail "step out of main" }
}
-if {![target_info exists use_cygmon] || ![target_info use_cygmon]} {
+# When we're talking to a program running on a real stand-alone board,
+# every BSP's exit function behaves differently, so there's no single
+# way to tell whether we've exited gracefully or not. So don't run
+# these tests when use_gdb_stub is set, or when we're running under Cygmon.
+set program_exited_normally 0
+set program_not_exited 0
+set program_in_exit 0
+if {! [target_info exists use_gdb_stub]
+ && (! [target_info exists use_cygmon] || ! [target_info use_cygmon])} {
global program_exited;
if {[eval expr $program_exited == 0]} {
send_gdb "n\n"
# then we won't get the "Single-stepping until function
# exit" message.
pass "step to end of run"
+ set program_exited_normally 1
+ }
+ -re "Single.*EXIT code 0\r\n.*Program exited normally.*$gdb_prompt $" {
+ pass "step to end of run (status wrapper)"
+ set program_exited_normally 1
+ }
+ -re "Single.*EXIT code 0\r\n.*$gdb_prompt $" {
+ pass "step to end of run (status wrapper)"
}
-re ".*Single.*Program exited.*$gdb_prompt $" {
pass "step to end of run"
+ set program_exited_normally 1
}
-re ".*Single.*in exit.*from.*dld.sl.*$gdb_prompt $" {
pass "step to end of run"
- gdb_test "c" ".*" "continue after exit"
+ set program_in_exit 1
}
-re ".*Single.*_int_reset.*$gdb_prompt $" {
pass "step to end of run"
- setup_xfail "xstormy16-*-*"
+ if {![istarget "xstormy16-*-*"]} {
+ set program_exited_normally 1
+ }
}
-re ".*$gdb_prompt $" {
fail "step to end of run"
+ set program_not_exited 1
}
timeout {
fail "(timeout) step to end of run"
+ set program_not_exited 1
}
}
}
- set timeout $old_timeout
+ if {$program_in_exit} {
+ if {[gdb_test "c" ".*" "continue after exit"] == 0} {
+ set program_exited_normally 1
+ }
+ } else {
+ unsupported "continue after exit"
+ }
- gdb_test "n" ".*The program is not being run.*" "don't step after run"
+ if {$program_exited_normally} {
+ gdb_test "n" ".*The program is not being run.*" "don't step after run"
+ } elseif {$program_not_exited} {
+ unresolved "don't step after run"
+ } else {
+ unsupported "don't step after run"
+ }
set exec_output [remote_exec host "ls core"]
pass "No core dumped on quit"
} else {
if [ regexp "No such file or directory" $exec_output] {
- pass "ls: core: No core dumped on quit"
+ pass "ls: core (No core dumped on quit)"
} else {
remote_exec build "rm -f core"
- fail "Core dumped on quit"
+ fail "ls: core (Core dumped on quit)"
}
}
}
+set timeout $old_timeout
+
#remote_exec build "rm -f ${binfile}"
return 0