-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2007, 2008, 2009, 2010,
-# 2011 Free Software Foundation, Inc.
+# Copyright 1994-2015 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
return
}
-if $tracelevel then {
- strace $tracelevel
-}
-
-
-set testfile interrupt
-set srcfile ${testfile}.c
-set binfile ${objdir}/${subdir}/${testfile}
+standard_testfile
set options { debug }
if { ! [target_info exists gdb,nosignals] } {
lappend options "additional_flags=-DSIGNALS"
}
-if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable $options] != "" } {
- untested interrupt.exp
- return -1
+if {[build_executable $testfile.exp $testfile $srcfile $options] == -1} {
+ untested $testfile.exp
+ return -1
}
gdb_start
gdb_test "shell stty intr '^C'" ".*" \
"set interrupt character in interrupt.exp"
if [runto_main] then {
- send_gdb "continue\n"
- gdb_expect {
- -re "\r\ntalk to me baby\r\n$" {
- pass "child process is alive"
+ global inferior_spawn_id gdb_spawn_id
+
+ set msg "process is alive"
+ gdb_test_multiple "continue" $msg {
+ -i "$inferior_spawn_id" -re "talk to me baby\r\n" {
+ pass $msg
}
- timeout { fail "run (timeout)" }
- eof { fail "run (eof)" }
}
+
# This should appear twice, once for the echo and once for the
- # program's output. Under dejagnu (but not interactively) for
- # SunOS4, it only appears once. Don't worry about it, I imagine
- # dejagnu has just done something to the tty modes.
- send_gdb "a\n"
- gdb_expect {
- -re "^a\r\n(|a\r\n)$" {
- pass "child process ate our char"
- }
- timeout { fail "echo a (timeout)" }
- eof { fail "echo a (eof)" }
+ # program's output.
+
+ set msg "child process ate our char"
+ send_inferior "a\n"
+ gdb_test_multiple "" $msg {
+ -i "$inferior_spawn_id" -re "^a\r\na\r\n$" {
+ pass $msg
+ }
}
+
# Wait until the program is in the read system call again.
sleep 2
# the read and delivering the cntrl-c.
send_gdb "\003"
- gdb_expect {
+ set msg "send_gdb control C"
+ gdb_test_multiple "" $msg {
-re "Program received signal SIGINT.*$gdb_prompt $" {
- pass "send_gdb control C"
+ pass $msg
}
- -re ".*$gdb_prompt $" { fail "send_gdb control C" }
- timeout { fail "send_gdb control C (timeout)" }
- eof { fail "send_gdb control C (eof)" }
}
+ set msg "call function when asleep"
send_gdb "p func1 ()\n"
- gdb_expect {
- -re " = 4.*$gdb_prompt $" { pass "call function when asleep" }
+ gdb_test_multiple "" $msg {
+ -re " = 4.*$gdb_prompt $" {
+ pass $msg
+ }
-re ".*Program received signal SIG(SEGV|ILL).*$gdb_prompt $" {
setup_xfail "i*86-pc-linux*-gnu*"
fail "child died when we called func1, skipped rest of tests"
# other machines as well.
setup_xfail "sparc*-*-solaris2*"
- setup_xfail "mips-*-ultrix*"
setup_xfail "i*86-*-solaris2*"
setup_xfail "*-*-sysv4*"
setup_xfail "vax-*-*"
setup_xfail "alpha-*-*"
setup_xfail "*-*-*bsd*"
- setup_xfail "*-*-irix*"
setup_xfail "*-*-hpux*"
setup_xfail "*-*-*lynx*"
- fail "call function when asleep (stays asleep)"
- # Send_Gdb a newline to wake it up
- send_gdb "\n"
+ fail "$msg (stays asleep)"
+ # Send the inferior a newline to wake it up.
+ send_inferior "\n"
gdb_test "" " = 4" "call function after waking it"
}
-# eof { fail "call function when asleep (eof)" }
}
# Now try calling the function again.
send_gdb "continue\n"
# For some reason, i386-*-sysv4 gdb fails to issue the Continuing
# message, but otherwise appears normal (FIXME).
- gdb_expect {
- -re "^continue\r\nContinuing.\r\n(\r\n|)$" { pass "continue" }
- -re "^continue\r\n\r\n" { fail "continue (missing Continuing.)" }
- -re "$gdb_prompt $" { fail "continue" }
- timeout { fail "continue (timeout)" }
- eof { fail "continue (eof)" }
+
+ set msg "continue"
+ gdb_test_multiple "" "$msg" {
+ -re "^continue\r\nContinuing.\r\n(\r\n|)$" {
+ pass $msg
+ }
+ -re "^continue\r\n\r\n" {
+ fail "$msg (missing Continuing.)"
+ }
}
- send_gdb "data\n"
+ send_inferior "data\n"
# The optional leading \r\n is in case we sent a newline above
# to wake the program, in which case the program now sends it
# back.
# FIXME: The pattern below leads to an expected success on HPUX-11.0
# but the success is spurious. Need to provide the right reg.expr.
# here.
- gdb_expect {
- -re "^(\r\n|)data\r\n(|data\r\n)$" { pass "echo data" }
- -re "Undefined command.*$gdb_prompt " { fail "echo data" }
- timeout { fail "echo data (timeout)" }
- eof { fail "echo data (eof)" }
+
+ set msg "echo data"
+ gdb_test_multiple "" $msg {
+ -i "$inferior_spawn_id" -re "^(\r\n|)data\r\ndata\r\n$" {
+ pass $msg
+ }
+ -i "$gdb_spawn_id" -re "Undefined command.*$gdb_prompt " {
+ fail $msg
+ }
}
if { ! [target_info exists gdb,nosignals] } {
# return to the loop.
set msg "signal SIGINT"
gdb_test_multiple "signal SIGINT" "$msg" {
- -re "^signal SIGINT\r\nContinuing with signal SIGINT.\r\n(\r\n|)$" { pass "$msg" }
+ -re "^signal SIGINT\r\nContinuing with signal SIGINT.\r\n(\r\n|)$" {
+ pass "$msg"
+ }
}
# We should be back in the loop.
- send_gdb "more data\n"
- gdb_expect {
- -re "^(\r\n|)more data\r\n(|more data\r\n)$" { pass "echo more data" }
- timeout { fail "echo more data (timeout)" }
- eof { fail "echo more data (eof)" }
+ send_inferior "more data\n"
+
+ set msg "echo more data"
+ gdb_test_multiple "" $msg {
+ -i "$inferior_spawn_id" -re "^(\r\n|)more data\r\nmore data\r\n$" {
+ pass $msg
+ }
}
}
- send_gdb "\004"
- gdb_expect {
- -re "end of file.*Program exited normally.*$gdb_prompt $" {
- pass "send end of file"
+ set saw_end_of_file 0
+ set saw_inferior_exit 0
+
+ set msg "send end of file"
+ send_inferior "\004"
+
+ set spawn_list "$inferior_spawn_id"
+
+ gdb_test_multiple "" $msg {
+ -i spawn_list -re "end of file" {
+ set saw_end_of_file 1
+ verbose -log "saw \"end of file\""
+ if {!$saw_inferior_exit} {
+ # When $inferior_spawn_id != $gdb_spawn_id, such
+ # as when testing with gdbserver, we may see the
+ # eof (the process exit, not the string just
+ # matched) for $inferior_spawn_id before the
+ # expected gdb output. Clear this so we no longer
+ # expect anything out of $inferior_spawn_id.
+ set spawn_list ""
+ exp_continue
+ }
+ }
+ -i "$gdb_spawn_id" -re "$inferior_exited_re normally.*$gdb_prompt " {
+ set saw_inferior_exit 1
+ verbose -log "saw inferior exit"
+ if {!$saw_end_of_file} {
+ exp_continue
+ }
}
- -re "$gdb_prompt $" { fail "send end of file" }
- timeout { fail "send end of file (timeout)" }
- eof { fail "send end of file (eof)" }
}
+
+ gdb_assert { $saw_end_of_file && $saw_inferior_exit } $msg
}
}
return 0