-# Copyright (C) 1998 Free Software Foundation, Inc.
+# Copyright 1998-2017 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
-#
+#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-#
+#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-gdb@prep.ai.mit.edu
-
-if $tracelevel then {
- strace $tracelevel
- }
-
-set prms_id 0
-set bug_id 0
+# along with this program. If not, see <http://www.gnu.org/licenses/>. */
-# are we on a target board
-if ![isnative] then {
- return 0
-}
clear_xfail "*-*-*"
-set testfile "jump"
-set srcfile ${testfile}.c
-set binfile ${objdir}/${subdir}/${testfile}
+standard_testfile .c
# Build the test case
-if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-w}] != "" } {
- gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug nowarnings}] != "" } {
+ untested "failed to compile"
+ return -1
}
# Start with a fresh gdb
-gdb_exit
-gdb_start
-gdb_reinitialize_dir $srcdir/$subdir
-gdb_load ${binfile}
+clean_restart ${binfile}
if ![runto_main] then {
perror "Couldn't run to main"
# Set a breakpoint on the statement that we're about to jump to.
# The statement doesn't contain a function call.
#
-send_gdb "break 22\n"
set bp_on_non_call 0
-gdb_expect {
- -re "\[Bb\]reakpoint (\[0-9\]*) at 0x\[0-9a-fA-F\]*: file .*${srcfile}, line 22.*$gdb_prompt $"\
- {set bp_on_non_call $expect_out(1,string)
- pass "break before jump to non-call"}
- -re "$gdb_prompt $"\
- {fail "break before jump to non-call"}
- timeout {fail "(timeout) break before jump to non-call"}
+set non_call_line [gdb_get_line_number "bp-on-non-call"]
+gdb_test_multiple "break $non_call_line" "break before jump to non-call" {
+ -re "\[Bb\]reakpoint (${decimal}) at ${hex}: file .*${srcfile}, line $non_call_line.*$gdb_prompt $" {
+ set bp_on_non_call $expect_out(1,string)
+ pass "break before jump to non-call"
+ }
}
# Can we jump to the statement? Do we stop there?
#
-send_gdb "jump 22\n"
-gdb_expect {
- -re "Breakpoint \[0-9\]*, .*${srcfile}:22.*$gdb_prompt $"\
- {pass "jump to non-call"}
- -re "$gdb_prompt $"\
- {fail "jump to non-call"}
- timeout {fail "(timeout) jump to non-call"}
-}
+gdb_test "jump $non_call_line" "Breakpoint ${decimal}, .*${srcfile}:$non_call_line.*" \
+ "jump to non-call"
# Set a breakpoint on the statement that we're about to jump to.
# The statement does contain a function call.
#
-send_gdb "break 21\n"
set bp_on_call 0
-gdb_expect {
- -re "\[Bb\]reakpoint (\[0-9\]*) at 0x\[0-9a-fA-F\]*: file .*${srcfile}, line 21.*$gdb_prompt $"\
- {set bp_on_call $expect_out(1,string)
- pass "break before jump to call"}
- -re "$gdb_prompt $"\
- {fail "break before jump to call"}
- timeout {fail "(timeout) break before jump to call"}
+set call_line [gdb_get_line_number "bp-on-call"]
+gdb_test_multiple "break $call_line" "break before jump to call" {
+ -re "\[Bb\]reakpoint (${decimal}) at ${hex}: file .*${srcfile}, line $call_line.*$gdb_prompt $" {
+ set bp_on_call $expect_out(1,string)
+ pass "break before jump to call"
+ }
}
# Can we jump to the statement? Do we stop there?
#
-send_gdb "jump 21\n"
-gdb_expect {
- -re "Breakpoint \[0-9\]*, .*${srcfile}:21.*$gdb_prompt $"\
- {pass "jump to call"}
- -re "$gdb_prompt $"\
- {fail "jump to call"}
- timeout {fail "(timeout) jump to call"}
-}
+gdb_test "jump $call_line" \
+ "Breakpoint ${decimal}, .*${srcfile}:$call_line.*" \
+ "jump to call"
# If we disable the breakpoint at the function call, and then
# if we jump to that statement, do we not stop there, but at
# the following breakpoint?
#
-send_gdb "disable $bp_on_call\n"
-gdb_expect {
- -re "$gdb_prompt $"\
- {pass "disable breakpoint on call"}
- timeout {fail "(timeout) disable breakpoint on call"}
-}
+gdb_test_no_output "disable $bp_on_call" "disable breakpoint on call"
-send_gdb "jump 21\n"
-gdb_expect {
- -re "Breakpoint \[0-9\]*, .*${srcfile}:22.*$gdb_prompt $"\
- {pass "jump to call with disabled breakpoint"}
- -re "$gdb_prompt $"\
- {fail "jump to call with disabled breakpoint"}
- timeout {fail "(timeout) jump to call with disabled breakpoint"}
-}
+gdb_test "jump $call_line" "Breakpoint ${decimal}, .*${srcfile}:$non_call_line.*" \
+ "jump to call with disabled breakpoint"
# Verify that GDB responds gracefully to the "jump" command without
# an argument.
#
-send_gdb "jump\n"
-gdb_expect {
- -re "Argument required .starting address..*$gdb_prompt $"\
- {pass "jump without argument disallowed"}
- -re "$gdb_prompt $"\
- {fail "jump without argument disallowed"}
- timeout {fail "(timeout) jump without argument disallowed"}
-}
+gdb_test "jump" "Argument required .starting address.*" \
+ "jump without argument disallowed"
+
# Verify that GDB responds gracefully to the "jump" command with
# trailing junk.
#
-send_gdb "jump 21 100\n"
-gdb_expect {
- -re "Junk at end of line specification: 100.*$gdb_prompt $"\
- {pass "jump with trailing argument junk"}
- -re "$gdb_prompt $"\
- {fail "jump with trailing argument junk"}
- timeout {fail "(timeout) jump with trailing argument junk"}
-}
+gdb_test "jump $call_line 100" \
+ "malformed linespec error: unexpected number, \"100\"" \
+ "jump with trailing argument junk"
+
# Verify that GDB responds gracefully to a request to jump out of
# the current function. (Note that this will very likely cause the
#
# Try it both ways: confirming and not confirming the jump.
#
-send_gdb "jump 12\n"
-gdb_expect {
- -re "Line 12 is not in `main'. Jump anyway.*y or n. $"\
- {send_gdb "n\n"
- gdb_expect {
- -re "Not confirmed.*$gdb_prompt $"\
- {pass "aborted jump out of current function"}
- -re "$gdb_prompt $"\
- {fail "aborted jump out of current function"}
- timeout {fail "(timeout) aborted jump out of current function"}
- }
- }
- -re "$gdb_prompt $"\
- {fail "aborted jump out of current function"}
- timeout {fail "(timeout) aborted jump out of current function"}
-}
-send_gdb "jump 12\n"
-gdb_expect {
- -re "Line 12 is not in `main'. Jump anyway.*y or n. $"\
- {send_gdb "y\n"
- gdb_expect {
- -re "Continuing at.*$gdb_prompt $"\
- {pass "jump out of current function"}
- -re "$gdb_prompt $"\
- {fail "jump out of current function"}
- timeout {fail "(timeout) jump out of current function"}
- }
- }
- -re "$gdb_prompt $"\
- {fail "jump out of current function"}
- timeout {fail "(timeout) jump out of current function"}
-}
+set out_line [gdb_get_line_number "out-of-func"]
+gdb_test "jump $out_line" \
+ "Not confirmed.*" \
+ "aborted jump out of current function" \
+ "Line $out_line is not in `main'. Jump anyway.*y or n. $" \
+ "n"
+
+gdb_test "jump $out_line" \
+ "Continuing at.*" \
+ "jump out of current function" \
+ "Line $out_line is not in `main'. Jump anyway.*y or n. $" \
+ "y"
gdb_exit
return 0