-# Copyright (C) 1997, 1998, 1999 Free Software Foundation, Inc.
+# Copyright 1997, 1998, 1999, 2003, 2004, 2007 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
-#
+#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-#
+#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-gdb@prep.ai.mit.edu
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
if [target_info exists gdb,nosignals] {
verbose "Skipping signals.exp because of nosignals."
set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}
if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
- gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
+ untested signals.exp
+ return -1
}
# Create and source the file that provides information about the compiler
set void void
}
-proc signal_tests_1 {} {
- global gdb_prompt
- if [runto_main] then {
- gdb_test "next" "signal \\(SIGUSR1.*" \
- "next over signal (SIGALRM, handler)"
- gdb_test "next" "alarm \\(.*" \
- "next over signal (SIGUSR1, handler)"
- gdb_test "next" "\\+\\+count; /\\* first \\*/" \
- "next over alarm (1)"
- # An alarm has been signaled, give the signal time to get delivered.
- sleep 2
-
- # i386 BSD currently fails the next test with a SIGTRAP.
- setup_xfail "i*86-*-bsd*"
- # But Dynix has a DECR_PC_AFTER_BREAK of zero, so the failure
- # is shadowed by hitting the through_sigtramp_breakpoint.
- clear_xfail "i*86-sequent-bsd*"
- # Univel SVR4 i386 continues instead of stepping.
- setup_xfail "i*86-univel-sysv4*"
- # lynx fails with "next" acting like "continue"
- setup_xfail "*-*-*lynx*"
- # linux (aout versions) also fails with "next" acting like "continue"
- # this is probably more dependant on the kernel version than on the
- # object file format or utils. (sigh)
- setup_xfail "i*86-pc-linuxaout-gnu" "i*86-pc-linuxoldld-gnu"
- send_gdb "next\n"
- gdb_expect {
- -re "alarm .*$gdb_prompt $" { pass "next to 2nd alarm (1)" }
- -re "Program received signal SIGTRAP.*first.*$gdb_prompt $" {
-
- # This can happen on machines that have a trace flag
- # in their PS register.
- # The trace flag in the PS register will be set due to
- # the `next' command.
- # Before calling the signal handler, the PS register
- # is pushed along with the context on the user stack.
- # When the signal handler has finished, it reenters the
- # the kernel via a sigreturn syscall, which restores the
- # PS register along with the context.
- # If the kernel erroneously does not clear the trace flag
- # in the pushed context, gdb will receive a SIGTRAP from
- # the set trace flag in the restored context after the
- # signal handler has finished.
-
- # I do not yet understand why the SIGTRAP does not occur
- # after stepping the instruction at the restored PC on
- # i386 BSDI 1.0 systems.
-
- # Note that the vax under Ultrix also exhibits
- # this behaviour (it is uncovered by the `continue from
- # a break in a signal handler' test below).
- # With this test the failure is shadowed by hitting the
- # through_sigtramp_breakpoint upon return from the signal
- # handler.
-
- # SVR4 and Linux based i*86 systems exhibit this behaviour
- # as well (it is uncovered by the `continue from a break
- # in a signal handler' test below).
- # As these systems use procfs, where we tell the kernel not
- # to tell gdb about `pass' signals, and the trace flag is
- # cleared by the kernel before entering the sigtramp
- # routine, GDB will not notice the execution of the signal
- # handler.
- # Upon return from the signal handler, GDB will receive
- # a SIGTRAP from the set trace flag in the restored context.
- # The SIGTRAP marks the end of a (albeit long winded)
- # single step for GDB, causing this test to pass.
-
- fail "next to 2nd alarm (1) (probably kernel bug)"
- gdb_test "next" "alarm.*" "next to 2nd alarm (1)"
- }
- -re "Program exited with code.*$gdb_prompt $" {
-
- # This is apparently a bug in the UnixWare kernel (but
- # has not been investigated beyond the
- # resume/target_wait level, and has not been reported
- # to Univel). If it steps when a signal is pending,
- # it does a continue instead. I don't know whether
- # there is a workaround.
-
- # Perhaps this problem exists on other SVR4 systems;
- # but (a) we have no reason to think so, and (b) if we
- # put a wrong xfail here, we never get an XPASS to let
- # us know that it was incorrect (and then if such a
- # configuration regresses we have no way of knowing).
- # Solaris is not a relevant data point either way
- # because it lacks single stepping.
-
- # fnf: I don't agree with the above philosophy. We
- # can never be sure that any particular XFAIL is
- # specified 100% correctly in that no systems with
- # the bug are missed and all systems without the bug
- # are excluded. If we include an XFAIL that isn't
- # appropriate for a particular system, then when that
- # system gets tested it will XPASS, and someone should
- # investigate and fix the setup_xfail as appropriate,
- # or more preferably, the actual bug. Each such case
- # adds more data to narrowing down the scope of the
- # problem and ultimately fixing it.
-
- setup_xfail "i*86-*-sysv4*"
- fail "'next' behaved as 'continue (known SVR4 bug)'"
- return 0
- }
- -re ".*$gdb_prompt $" { fail "next to 2nd alarm (1)" }
- timeout { fail "next to 2nd alarm (1); (timeout)" }
- eof { fail "next to 2nd alarm (1); (eof)" }
- }
-
- gdb_test "break handler" "Breakpoint \[0-9\]+ .*"
- gdb_test "next" "\\+\\+count; /\\* second \\*/" \
- "next to 2nd ++count in signals_tests_1"
- # An alarm has been signaled, give the signal time to get delivered.
- sleep 2
-
- set bash_bug 0
- send_gdb "next\n"
- gdb_expect {
- -re "Breakpoint.*handler.*$gdb_prompt $" {
- pass "next to handler in signals_tests_1"
- }
- -re "Program received signal SIGEMT.*$gdb_prompt $" {
- # Bash versions before 1.13.5 cause this behaviour
- # by blocking SIGTRAP.
- fail "next to handler in signals_tests_1 (known problem with bash versions before 1.13.5)"
- set bash_bug 1
- gdb_test "signal 0" "Breakpoint.*handler.*"
- }
- -re ".*$gdb_prompt $" { fail "next to handler in signals_tests_1" }
- timeout { fail "next to handler in signals_tests_1 (timeout)" }
- eof { fail "next to handler in signals_tests_1 (eof)" }
- }
-
- # This doesn't test that main is frame #2, just that main is frame
- # #2, #3, or higher. At some point this should be fixed (but
- # it quite possibly would introduce new FAILs on some systems).
- setup_xfail "i*86-*-bsdi2.0"
- gdb_test "backtrace 10" "#0.*handler.*#1.*#2.*main.*" \
- "backtrace in signals_tests_1"
-
- gdb_test "break func1" "Breakpoint \[0-9\]+ .*"
- gdb_test "break func2" "Breakpoint \[0-9\]+ .*"
-
- # Vax Ultrix and i386 BSD currently fail the next test with
- # a SIGTRAP, but with different symptoms.
- setup_xfail "vax-*-ultrix*"
- setup_xfail "i*86-*-bsd*"
- setup_xfail "i*86-pc-linux-gnu*"
- setup_xfail "i*86-*-solaris2*"
- send_gdb "continue\n"
- gdb_expect {
- -re "Breakpoint.*func1.*$gdb_prompt $" { pass "continue to func1" }
- -re "Program received signal SIGTRAP.*second.*$gdb_prompt $" {
-
- # See explanation for `next to 2nd alarm (1)' fail above.
- # We did step into the signal handler, hit a breakpoint
- # in the handler and continued from the breakpoint.
- # The set trace flag in the restored context is causing
- # the SIGTRAP, without stepping an instruction.
-
- fail "continue to func1 (probably kernel bug)"
- gdb_test "continue" "Breakpoint.*func1.*" \
- "extra continue to func1"
- }
- -re "Program received signal SIGTRAP.*func1 ..;.*$gdb_prompt $" {
-
- # On the vax under Ultrix the set trace flag in the restored
- # context is causing the SIGTRAP, but after stepping one
- # instruction, as expected.
-
- fail "continue to func1 (probably kernel bug)"
- gdb_test "continue" "Breakpoint.*func1.*" \
- "extra continue to func1"
- }
- -re ".*$gdb_prompt $" { fail "continue to func1" }
- default { fail "continue to func1" }
- }
-
- setup_xfail "*-*-irix*"
- send_gdb "signal SIGUSR1\n"
- gdb_expect {
- -re "Breakpoint.*handler.*$gdb_prompt $" { pass "signal SIGUSR1" }
- -re "Program received signal SIGUSR1.*$gdb_prompt $" {
- # This is what irix4 and irix5 do.
- # It would appear to be a kernel bug.
- fail "signal SIGUSR1"
- gdb_test "continue" "Breakpoint.*handler.*" "pass it SIGUSR1"
- }
- -re ".*$gdb_prompt $" { fail "signal SIGUSR1" }
- default { fail "signal SIGUSR1" }
- }
-
- # Will tend to wrongly require an extra continue.
-
- # The problem here is that the breakpoint at func1 will be
- # inserted, and when the system finishes with the signal
- # handler it will try to execute there. For GDB to try to
- # remember that it was going to step over a breakpoint when a
- # signal happened, distinguish this case from the case where
- # func1 is called from the signal handler, etc., seems
- # exceedingly difficult. So don't expect this to get fixed
- # anytime soon.
-
- setup_xfail "*-*-*"
- send_gdb "continue\n"
- gdb_expect {
- -re "Breakpoint.*func2.*$gdb_prompt $" { pass "continue to func2" }
- -re "Breakpoint.*func1.*$gdb_prompt $" {
- fail "continue to func2"
- gdb_test "continue" "Breakpoint.*func2.*" \
- "extra continue to func2"
- }
- -re ".*$gdb_prompt $" { fail "continue to func2" }
- default { fail "continue to func2" }
- }
-
- sleep 2
-
- # GDB yanks out the breakpoints to step over the breakpoint it
- # stopped at, which means the breakpoint at handler is yanked.
- # But if SOFTWARE_SINGLE_STEP_P, we won't get another chance to
- # reinsert them (at least not with procfs, where we tell the kernel
- # not to tell gdb about `pass' signals). So the fix would appear to
- # be to just yank that one breakpoint when we step over it.
-
- setup_xfail "sparc*-*-*"
- setup_xfail "rs6000-*-*"
- setup_xfail "powerpc-*-*"
-
- # A faulty bash will not step the inferior into sigtramp on sun3.
- if {$bash_bug} then {
- setup_xfail "m68*-*-sunos4*"
- }
-
- setup_xfail "i*86-pc-linux-gnu*"
- setup_xfail "i*86-*-solaris2*"
- gdb_test "continue" "Breakpoint.*handler.*" "continue to handler"
-
- # If the SOFTWARE_SINGLE_STEP_P failure happened, we have already
- # exited.
- # If we succeeded a continue will return from the handler to func2.
- # GDB now has `forgotten' that it intended to step over the
- # breakpoint at func2 and will stop at func2.
- setup_xfail "*-*-*"
- # The sun3 with a faulty bash will also be `forgetful' but it
- # already got the spurious stop at func2 and this continue will work.
- if {$bash_bug} then {
- clear_xfail "m68*-*-sunos4*"
- }
- gdb_test "continue" "Program exited with code 010\\." \
- "continue to exit in signals_tests_1 "
- }
-}
-
-# On a few losing systems, ptrace (PT_CONTINUE) or ptrace (PT_STEP)
-# causes pending signals to be cleared, which causes these tests to
-# get nowhere fast. This is totally losing behavior (perhaps there
-# are cases in which is it useful but the user needs more control,
-# which they mostly have in GDB), but some people apparently think it
-# is a feature. It is documented in the ptrace manpage on Motorola
-# Delta Series sysV68 R3V7.1 and on HPUX 9.0. Even the non-HPUX PA
-# OSes (BSD and OSF/1) seem to have figured they had to copy this
-# braindamage.
-
-if {[ istarget "m68*-motorola-*" ] || [ istarget "hppa*-*-bsd*" ] ||
- [ istarget "hppa*-*-osf*" ]} then {
- setup_xfail "*-*-*"
- fail "ptrace loses on signals on this target"
- return 0
-}
-
-# lynx2.2.2 doesn't lose signals, instead it screws up the stack pointer
-# in some of these tests leading to massive problems. I've
-# reported this to lynx, hopefully it'll be fixed in lynx2.3.
-# Severe braindamage.
-if [ istarget "*-*-*lynx*" ] then {
- setup_xfail "*-*-*"
- fail "kernel scroggs stack pointer in signal tests on this target"
- return 0
-}
-
gdb_exit
gdb_start
# This will need to be updated as the exact list of signals changes,
# but I want to test that TARGET_SIGNAL_0, TARGET_SIGNAL_DEFAULT, and
# TARGET_SIGNAL_UNKNOWN are skipped.
+
proc test_handle_all_print {} {
global timeout
# Increase timeout and expect input buffer for large output from gdb.
|| [istarget "*-*-mach*"] ) } {
gdb_test "handle all print" "Signal\[ \]+Stop\[ \]+Print\[ \]+Pass to program\[ \]+Description\r\nSIGHUP\[ \]+Yes\[ \]+Yes\[ \]+Yes\[ \]+Hangup.*SIG63\[ \]+Yes\[ \]+Yes\[ \]+Yes\[ \]+Real-time event 63.*EXC_BREAKPOINT\[ \]+Yes\[ \]+Yes\[ \]+Yes\[ \]+Breakpoint"
} else {
- gdb_test "handle all print" "Signal\[ \]+Stop\[ \]+Print\[ \]+Pass to program\[ \]+Description\r\nSIGHUP\[ \]+Yes\[ \]+Yes\[ \]+Yes\[ \]+Hangup.*SIG63\[ \]+Yes\[ \]+Yes\[ \]+Yes\[ \]+Real-time event 63"
+ gdb_test "handle all print" "Signal\[ \]+Stop\[ \]+Print\[ \]+Pass to program\[ \]+Description\r\nSIGHUP\[ \]+Yes\[ \]+Yes\[ \]+Yes\[ \]+Hangup.*SIG63\[ \]+Yes\[ \]+Yes\[ \]+Yes\[ \]+Real-time event 63.*"
}
set timeout $oldtimeout
verbose "Timeout restored to $timeout seconds" 2
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load $binfile
-signal_tests_1
-
-# Force a resync, so we're looking at the right prompt. On SCO we
-# were getting out of sync (I don't understand why).
-send_gdb "p 1+1\n"
-gdb_expect {
- -re "= 2.*$gdb_prompt $" {}
- -re ".*$gdb_prompt $" { perror "sync trouble in signals.exp" }
- default { perror "sync trouble in signals.exp" }
-}
if [runto_main] then {
+
+ # Since count is a static variable outside main, runto_main is no
+ # guarantee that count will be 0 at this point.
+
+ gdb_test "set variable count = 0" ""
+
+ # Test an inferior function call that takes a signal that hits a
+ # breakpoint (with a false condition). When GDB tries to run the
+ # stack dummy, it will hit the breakpoint at handler. Provided it
+ # doesn't lose its cool, this is not a problem, it just has to
+ # note that the breakpoint condition is false and keep going.
+
+ # ...setup an always false conditional breakpoint
+
gdb_test "break handler if 0" "Breakpoint \[0-9\]+ .*"
gdb_test "set \$handler_breakpoint_number = \$bpnum" ""
- # Get to the point where a signal is waiting to be delivered
- gdb_test "next" "signal \\(SIGUSR1.*" "next to signal in signals.exp"
- gdb_test "next" "alarm \\(.*" "next to alarm #1 in signals.exp"
+ # ...setup the signal
+
+ gdb_test "next" "signal \\(SIGUSR1.*" "next to signal"
+ gdb_test "next" "alarm \\(.*" "next to alarm #1"
gdb_test "next" "\\+\\+count; /\\* first \\*/" \
- "next to ++count #1 in signals.exp"
- # Give the signal time to get delivered
+ "next to ++count #1"
sleep 2
- # Now call a function. When GDB tries to run the stack dummy,
- # it will hit the breakpoint at handler. Provided it doesn't
- # lose its cool, this is not a problem, it just has to note
- # that the breakpoint condition is false and keep going.
+ # ...call the function
gdb_test "p func1 ()" "^p func1 \\(\\)\r\n.\[0-9\]* = $void" \
- "p func1 () #1 in signals.exp"
+ "p func1 () #1"
+
+ # ...veryfiy that the cout was updated
+
+ gdb_test "p count" "= 2" "p count #1"
- # Make sure the count got incremented.
+ # Now run the same test but with a breakpoint that does stop.
- # Haven't investigated this xfail
- setup_xfail "rs6000-*-*"
- setup_xfail "powerpc-*-*"
- gdb_test "p count" "= 2" "p count #1 in signals.exp"
- if { [istarget "rs6000-*-*"] || [istarget "powerpc-*-*"] } { return 0 }
+ # ...set up the breakpoint and signal
gdb_test "condition \$handler_breakpoint_number" "now unconditional\\."
- gdb_test "next" "alarm \\(.*" "next to alarm #2 in signals.exp"
+ gdb_test "next" "alarm \\(.*" "next to alarm #2"
gdb_test "next" "\\+\\+count; /\\* second \\*/" \
- "next to ++count #2 in signals.exp"
+ "next to ++count #2"
sleep 2
- # This time we stop when GDB tries to run the stack dummy.
- # So it is OK that we do not print the return value from the function.
+ # ...call the function, which is immediatly interrupted
+
gdb_test "p func1 ()" \
"Breakpoint \[0-9\]*, handler.*
The program being debugged stopped while in a function called from GDB.*" \
- "p func1 () #2 in signals.exp"
- # But we should be able to backtrace...
- # On alpha-*-osf2.0 this test works when run manually but sometime fails when
- # run under dejagnu, making it very hard to debug the problem. Weird...
- gdb_test "bt 10" "#0.*handler.*#1.*#2.*main.*" "bt in signals.exp"
- # ...and continue...
- gdb_test "continue" "Continuing\\." "continue in signals.exp"
+ "p func1 () #2"
+
+ # ...verify the backtrace
+
+ gdb_test "backtrace" \
+ "#0 handler.*#1 .signal handler called.*#2 func1.*#3 .function called from gdb.*#4.*main.*" \
+ "backtrace from handler when calling func1"
+
+ # ...and continue (silently returning)
+
+ gdb_test "continue" "Continuing\\."
+
# ...and then count should have been incremented
- gdb_test "p count" "= 5" "p count #2 in signals.exp"
+ gdb_test "p count" "= 5" "p count #2"
-# Verify that "info signals" produces reasonable output.
-#
- send_gdb "info signals\n"
- gdb_expect {
- -re "SIGHUP.*SIGINT.*SIGQUIT.*SIGILL.*SIGTRAP.*SIGABRT.*SIGEMT.*SIGFPE.*SIGKILL.*SIGBUS.*SIGSEGV.*SIGSYS.*SIGPIPE.*SIGALRM.*SIGTERM.*SIGURG.*SIGSTOP.*SIGTSTP.*SIGCONT.*SIGCHLD.*SIGTTIN.*SIGTTOU.*SIGIO.*SIGXCPU.*SIGXFSZ.*SIGVTALRM.*SIGPROF.*SIGWINCH.*SIGLOST.*SIGUSR1.*SIGUSR2.*SIGPWR.*SIGPOLL.*SIGWIND.*SIGPHONE.*SIGWAITING.*SIGLWP.*SIGDANGER.*SIGGRANT.*SIGRETRACT.*SIGMSG.*SIGSOUND.*SIGSAK.*SIGPRIO.*SIG33.*SIG34.*SIG35.*SIG36.*SIG37.*SIG38.*SIG39.*SIG40.*SIG41.*SIG42.*SIG43.*SIG44.*SIG45.*SIG46.*SIG47.*SIG48.*SIG49.*SIG50.*SIG51.*SIG52.*SIG53.*SIG54.*SIG55.*SIG56.*SIG57.*SIG58.*SIG59.*SIG60.*SIG61.*SIG62.*SIG63.*Use the \"handle\" command to change these tables.*$gdb_prompt $"\
- {pass "info signals"}
- -re "$gdb_prompt $"\
- {fail "info signals"}
- timeout {fail "(timeout) info signals"}
- }
-# Verify that "info signal" correctly handles an argument, be it a
-# symbolic signal name, or an integer ID.
-#
- send_gdb "info signal SIGTRAP\n"
- gdb_expect {
- -re ".*SIGTRAP\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*No\[ \t\]*Trace/breakpoint trap.*$gdb_prompt $"\
- {pass "info signal SIGTRAP"}
- -re "$gdb_prompt $"\
- {fail "info signal SIGTRAP"}
- timeout {fail "(timeout) info signal SIGTRAP"}
- }
+ # Verify that "info signals" produces reasonable output.
- send_gdb "info signal 5\n"
- gdb_expect {
- -re ".*SIGTRAP\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*No\[ \t\]*Trace/breakpoint trap.*$gdb_prompt $"\
- {pass "info signal 5"}
- -re "$gdb_prompt $"\
- {fail "info signal 5"}
- timeout {fail "(timeout) info signal 5"}
- }
+ gdb_test "info signals" "SIGHUP.*SIGINT.*SIGQUIT.*SIGILL.*SIGTRAP.*SIGABRT.*SIGEMT.*SIGFPE.*SIGKILL.*SIGBUS.*SIGSEGV.*SIGSYS.*SIGPIPE.*SIGALRM.*SIGTERM.*SIGURG.*SIGSTOP.*SIGTSTP.*SIGCONT.*SIGCHLD.*SIGTTIN.*SIGTTOU.*SIGIO.*SIGXCPU.*SIGXFSZ.*SIGVTALRM.*SIGPROF.*SIGWINCH.*SIGLOST.*SIGUSR1.*SIGUSR2.*SIGPWR.*SIGPOLL.*SIGWIND.*SIGPHONE.*SIGWAITING.*SIGLWP.*SIGDANGER.*SIGGRANT.*SIGRETRACT.*SIGMSG.*SIGSOUND.*SIGSAK.*SIGPRIO.*SIG33.*SIG34.*SIG35.*SIG36.*SIG37.*SIG38.*SIG39.*SIG40.*SIG41.*SIG42.*SIG43.*SIG44.*SIG45.*SIG46.*SIG47.*SIG48.*SIG49.*SIG50.*SIG51.*SIG52.*SIG53.*SIG54.*SIG55.*SIG56.*SIG57.*SIG58.*SIG59.*SIG60.*SIG61.*SIG62.*SIG63.*Use the \"handle\" command to change these tables.*" \
+ "info signals"
-# Verify that "handle" with illegal arguments is gracefully, um, handled.
-#
- send_gdb "handle\n"
- gdb_expect {
- -re "Argument required .signal to handle.*$gdb_prompt $"\
- {pass "handle without arguments"}
- -re "$gdb_prompt $"\
- {fail "handle without arguments"}
- timeout {fail "(timeout) handle without arguments"}
- }
+ # Verify that "info signal" correctly handles an argument, be it a
+ # symbolic signal name, or an integer ID.
- send_gdb "handle SIGFOO\n"
- gdb_expect {
- -re "Unrecognized or ambiguous flag word: \"SIGFOO\".*$gdb_prompt $"\
- {pass "handle with bogus SIG"}
- -re "$gdb_prompt $"\
- {fail "handle with bogus SIG"}
- timeout {fail "(timeout) handle with bogus SIG"}
- }
+ gdb_test "info signal SIGTRAP" \
+ "SIGTRAP\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*No\[ \t\]*Trace/breakpoint trap.*" \
+ "info signal SIGTRAP"
- send_gdb "handle SIGHUP frump\n"
- gdb_expect {
- -re "Unrecognized or ambiguous flag word: \"frump\".*$gdb_prompt $"\
- {pass "handle SIG with bogus action"}
- -re "$gdb_prompt $"\
- {fail "handle SIG with bogus action"}
- timeout {fail "(timeout) handle SIG with bogus action"}
- }
+ gdb_test "info signal 5" \
+ "SIGTRAP\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*No\[ \t\]*Trace/breakpoint trap.*" \
+ "info signal 5"
-# Verify that "handle" can take multiple actions per SIG, and that in
-# the case of conflicting actions, that the rightmost action "wins".
-#
- send_gdb "handle SIGHUP print noprint\n"
- gdb_expect {
- -re ".*SIGHUP\[ \t\]*No\[ \t\]*No\[ \t\]*Yes\[ \t\]*Hangup.*$gdb_prompt $"\
- {pass "handle SIG with multiple conflicting actions"}
- -re "$gdb_prompt $"\
- {fail "handle SIG with multiple conflicting actions"}
- timeout {fail "(timeout) handle SIG with multiple conflicting actions"}
- }
+ # Verify that "handle" with illegal arguments is gracefully, um,
+ # handled.
-# Exercise all the various actions. (We don't care what the outcome
-# is, this is just to ensure that they all can be parsed.)
-#
- send_gdb "handle SIGHUP print noprint stop nostop ignore noignore pass nopass\n"
- gdb_expect {
- -re ".*Signal.*$gdb_prompt $"\
- {pass "handle SIG parses all legal actions"}
- -re "$gdb_prompt $"\
- {fail "handle SIG parses all legal actions"}
- timeout {fail "(timeout) handle SIG parses all legal actions"}
- }
+ gdb_test "handle" \
+ "Argument required .signal to handle.*" \
+ "handle without arguments"
-# Verify that we can "handle" multiple signals at once, interspersed
-# with actions.
-#
- send_gdb "handle SIG63 print SIGILL\n"
- gdb_expect {
- -re ".*SIGILL\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*Illegal instruction.*SIG63\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*Real-time event 63.*$gdb_prompt $"\
- {pass "handle multiple SIGs"}
- -re "$gdb_prompt $"\
- {fail "handle multiple SIGs"}
- timeout {fail "(timeout) handle multiple SIGs"}
- }
+ gdb_test "handle SIGFOO" \
+ "Unrecognized or ambiguous flag word: \"SIGFOO\".*" \
+ "handle with bogus SIG"
-# Verify that "handle" can take a numeric argument for the signal ID,
-# rather than a symbolic name. (This may not be portable; works for
-# HP-UX.)
-#
-# Also note that this testpoint overrides SIGTRAP, which on HP-UX at
-# least, is used to implement single-steps and breakpoints. Don't
-# expect to run the inferior after this!
-#
- send_gdb "handle 5 nopass\n"
- gdb_expect {
- -re ".*SIGTRAP is used by the debugger.*Are you sure you want to change it.*y or n.*"\
- {send_gdb "y\n"
- gdb_expect {
- -re ".*SIGTRAP\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*No\[ \t\]*Trace/breakpoint trap.*$gdb_prompt $"\
- {pass "override SIGTRAP (#5)"}
- -re "$gdb_prompt $"\
- {fail "override SIGTRAP (#5)"}
- timeout {fail "(timeout) override SIGTRAP (#5)"}
- }
- }
- -re "$gdb_prompt $"\
- {fail "override SIGTRAP (#5)"}
- timeout {fail "(timeout) override SIGTRAP (#5)"}
- }
+ gdb_test "handle SIGHUP frump" \
+ "Unrecognized or ambiguous flag word: \"frump\".*" \
+ "handle SIG with bogus action"
-# GDB doesn't seem to allow numeric signal IDs larger than 15. Verify
-# that restriction. ??rehrauer: Not sure if this is a feature or a
-# bug, actually. Why is the range 1-15?
-#
- send_gdb "handle 58\n"
- gdb_expect {
- -re "Only signals 1-15 are valid as numeric signals.*Use \"info signals\" for a list of symbolic signals.*$gdb_prompt $"\
- {pass "invalid signal number rejected"}
- -re "$gdb_prompt $"\
- {fail "invalid signal number rejected"}
- timeout {fail "(timeout) invalid signal number rejected"}
- }
+ # Verify that "handle" can take multiple actions per SIG, and that
+ # in the case of conflicting actions, that the rightmost action
+ # "wins".
-# Verify that we can accept a signal ID range (number-number).
-# ??rehrauer: This feature isn't documented on the quick-reference
-# card.
-#
- send_gdb "handle 13-15\n"
- gdb_expect {
- -re ".*SIGPIPE.*SIGALRM.*SIGTERM.*$gdb_prompt $"\
- {pass "handle multiple SIGs via integer range"}
- -re "$gdb_prompt $"\
- {fail "handle multiple SIGs via integer range"}
- timeout {fail "(timeout) handle multiple SIGs via integer range"}
+ gdb_test "handle SIGHUP print noprint" \
+ "SIGHUP\[ \t\]*No\[ \t\]*No\[ \t\]*Yes\[ \t\]*Hangup.*" \
+ "handle SIG with multiple conflicting actions"
- }
+ # Exercise all the various actions. (We don't care what the
+ # outcome is, this is just to ensure that they all can be parsed.)
-# Bizarrely enough, GDB also allows you to reverse the range
-# stat, stop IDs. E.g., "3-1" and "1-3" mean the same thing.
-# Probably this isn't documented, but the code anticipates it,
-# so we'd best test it...
-#
- send_gdb "handle 15-13\n"
- gdb_expect {
- -re ".*SIGPIPE.*SIGALRM.*SIGTERM.*$gdb_prompt $"\
- {pass "handle multiple SIGs via integer range"}
- -re "$gdb_prompt $"\
- {fail "handle multiple SIGs via integer range"}
- timeout {fail "(timeout) handle multiple SIGs via integer range"}
+ gdb_test "handle SIGHUP print noprint stop nostop ignore noignore pass nopass" \
+ "Signal.*" \
+ "handle SIG parses all legal actions"
- }
+ # Verify that we can "handle" multiple signals at once,
+ # interspersed with actions.
-# SIGINT is used by the debugger as well. Verify that we can change
-# our minds about changing it.
-#
- send_gdb "handle SIGINT nopass\n"
- gdb_expect {
- -re ".*SIGINT is used by the debugger.*Are you sure you want to change it.*y or n.*"\
- {send_gdb "n\n"
-# ??rehrauer: When you answer "n", the header for the signal info is
-# printed, but not the actual handler settings. Probably a bug.
-#
- gdb_expect {
- -re "Not confirmed, unchanged.*Signal.*$gdb_prompt $"\
- {pass "override SIGINT"}
- -re "$gdb_prompt $"\
- {fail "override SIGINT"}
- timeout {fail "(timeout) override SIGINT"}
- }
- }
- -re "$gdb_prompt $"\
- {fail "override SIGINT"}
- timeout {fail "(timeout) override SIGINT"}
- }
+ gdb_test "handle SIG63 print SIGILL" \
+ "SIGILL\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*Illegal instruction.*SIG63\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*Real-time event 63.*" \
+ "handle multiple SIGs"
-# Verify that GDB responds gracefully to the "signal" command with
-# a missing argument.
-#
- send_gdb "signal\n"
- gdb_expect {
- -re "Argument required .signal number..*$gdb_prompt $"\
- {pass "signal without arguments disallowed"}
- -re "$gdb_prompt $"\
- {fail "signal without arguments disallowed"}
- timeout {fail "(timeout) signal without arguments disallowed"}
+ # Verify that "handle" can take a numeric argument for the signal
+ # ID, rather than a symbolic name. (This may not be portable;
+ # works for HP-UX.)
+
+ # Also note that this testpoint overrides SIGTRAP, which on HP-UX
+ # at least, is used to implement single-steps and breakpoints.
+ # Don't expect to run the inferior after this!
+
+ set test "override SIGTRAP"
+ gdb_test_multiple "handle 5 nopass" "$test" {
+ -re "SIGTRAP is used by the debugger.*Are you sure you want to change it.*y or n.*" {
+ gdb_test "y" \
+ "SIGTRAP\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*No\[ \t\]*Trace/breakpoint trap.*" \
+ "$test"
+ }
}
-# Verify that we can successfully send a signal other than 0 to
-# the inferior. (This probably causes the inferior to run away.
-# Be prepared to rerun to main for further testing.)
-#
- send_gdb "signal 5\n"
- gdb_expect {
- -re "Continuing with signal SIGTRAP.*$gdb_prompt $"\
- {pass "sent signal 5"}
- -re "$gdb_prompt $"\
- {fail "sent signal 5"}
- timeout {fail "(timeout) sent signal 5"}
+ # GDB doesn't seem to allow numeric signal IDs larger than 15. Verify
+ # that restriction. ??rehrauer: Not sure if this is a feature or a
+ # bug, actually. Why is the range 1-15?
+
+ gdb_test "handle 58" \
+ "Only signals 1-15 are valid as numeric signals.*Use \"info signals\" for a list of symbolic signals.*" \
+ "invalid signal number rejected"
+
+ # Verify that we can accept a signal ID range (number-number).
+ # ??rehrauer: This feature isn't documented on the quick-reference
+ # card.
+
+ gdb_test "handle 13-15" \
+ "SIGPIPE.*SIGALRM.*SIGTERM.*" \
+ "handle multiple SIGs via integer range"
+
+ # Bizarrely enough, GDB also allows you to reverse the range stat,
+ # stop IDs. E.g., "3-1" and "1-3" mean the same thing. Probably
+ # this isn't documented, but the code anticipates it, so we'd best
+ # test it...
+
+ gdb_test "handle 15-13" \
+ "SIGPIPE.*SIGALRM.*SIGTERM.*" \
+ "handle multiple SIGs via reverse integer range"
+
+ # SIGINT is used by the debugger as well. Verify that we can
+ # change our minds about changing it.
+
+ set test "override SIGINT"
+ gdb_test_multiple "handle SIGINT nopass" "$test" {
+ -re "SIGINT is used by the debugger.*Are you sure you want to change it.*y or n.*" {
+ gdb_test_multiple "n" "$test" {
+ -re "Not confirmed, unchanged.*Signal.*$gdb_prompt $" {
+ # "Signal ..." should not be in the output.
+ kfail gdb/1707 "$test"
+ }
+ -re "Not confirmed, unchanged.*$gdb_prompt $" {
+ pass "$test"
+ }
+ }
+ }
}
+ # Verify that GDB responds gracefully to the "signal" command with
+ # a missing argument.
+
+ gdb_test "signal" \
+ "Argument required .signal number..*" \
+ "signal without arguments disallowed"
+
+ # Verify that we can successfully send a signal other than 0 to
+ # the inferior. (This probably causes the inferior to run away.
+ # Be prepared to rerun to main for further testing.)
+
+ gdb_test "signal SIGUSR1" "Breakpoint.*handler.*"
+ gdb_test "bt" \
+ "#0 handler .*#1 .signal handler called.*\#2 .*main.*" \
+ "backtrace for SIGUSR1"
}
return 0