gdb_test "info threads $tid_list" \
$exp_error
- gdb_test "thread apply $tid_list p 1234" \
+ gdb_test "thread apply $tid_list" \
$exp_error \
"thread apply $tid_list"
}
# Issue both "info threads TID_LIST" and "thread apply TID_LIST" and
# expect the command to error out with "Invalid thread ID: $EXPECTED".
-# EXPECTED is a literal string, not a regexp.
-proc thr_apply_info_thr_invalid {tid_list expected} {
+# EXPECTED is a literal string, not a regexp. If EXPECTED is omitted,
+# TID_LIST is expected instead.
+proc thr_apply_info_thr_invalid {tid_list {expected ""}} {
+ if {$expected == ""} {
+ set expected $tid_list
+ }
set expected [string_to_regexp $expected]
gdb_test "info threads $tid_list" \
"Invalid thread ID: $expected"
gdb_continue_to_breakpoint "twice"
}
+ thr_apply_info_thr "1" \
+ "1.1"
+
+ thr_apply_info_thr "1.1" \
+ "1.1"
+
thr_apply_info_thr "1 2 3" \
"1.1 1.2 1.3"
thr_apply_info_thr "1.1-2 2.2-3" \
"1.1 1.2 2.2 2.3"
+ # Now test using GDB convenience variables.
+
+ gdb_test "p \$inf = 1" " = 1"
+ gdb_test "p \$thr_start = 2" " = 2"
+ gdb_test "p \$thr_end = 3" " = 3"
+
+ # Convenience variable for the inferior number, only.
+ thr_apply_info_thr "\$inf.2" \
+ "1.2"
+ thr_apply_info_thr "\$inf.2-3" \
+ "1.2 1.3"
+
+ # Convenience variables for thread numbers as well.
+ foreach prefix {"" "1." "\$inf."} {
+ thr_apply_info_thr "${prefix}\$thr_start" \
+ "1.2"
+ thr_apply_info_thr "${prefix}\$thr_start-\$thr_end" \
+ "1.2 1.3"
+ thr_apply_info_thr "${prefix}2-\$thr_end" \
+ "1.2 1.3"
+ thr_apply_info_thr "${prefix}\$thr_start-3" \
+ "1.2 1.3"
+
+ # Undefined convenience variable.
+ set prefix_re [string_to_regexp $prefix]
+ thr_apply_info_thr_error "${prefix}\$conv123" \
+ [multi_line \
+ "Convenience variable must have integer value\." \
+ "Invalid thread ID: ${prefix_re}\\\$conv123"]
+ }
+
+ # Convenience variables pointing at an inexisting thread and/or
+ # inferior.
+ gdb_test "p \$inf = 30" " = 30"
+ gdb_test "p \$thr = 20" " = 20"
+ # Try both the convenience variable and the literal number.
+ foreach thr {"\$thr" "20" "1.20" "\$inf.1" "30.1" } {
+ set expected [string_to_regexp $thr]
+ gdb_test "info threads $thr" "No threads match '${expected}'."
+ # "info threads" works like a filter. If there's any other
+ # valid thread in the list, there's no error.
+ info_threads "$thr 1.1" "1.1"
+ info_threads "1.1 $thr" "1.1"
+ }
+
+ gdb_test "thread apply \$thr p 1234" \
+ "warning: Unknown thread 1.20" \
+ "thread apply \$thr"
+
+ gdb_test "thread apply \$inf.1 p 1234" \
+ "warning: Unknown thread 30.1" \
+ "thread apply \$inf.1"
+
+ # Star ranges.
+
+ thr_apply_info_thr "1.*" \
+ "1.1 1.2 1.3"
+
+ thr_apply_info_thr "*" \
+ "1.1 1.2 1.3"
+
+ thr_apply_info_thr "1.* 2.1" \
+ "1.1 1.2 1.3 2.1"
+
+ thr_apply_info_thr "2.1 1.*" \
+ "1.1 1.2 1.3 2.1" \
+ "2.1 1.1 1.2 1.3"
+
+ thr_apply_info_thr "1.* 2.*" \
+ "1.1 1.2 1.3 2.1 2.2 2.3"
+
+ thr_apply_info_thr "2.* 1.*" \
+ "1.1 1.2 1.3 2.1 2.2 2.3" \
+ "2.1 2.2 2.3 1.1 1.2 1.3"
+
+ # There's no inferior 3, but "info threads" treats the thread list
+ # as a filter, so it's OK. "thread apply" complains about the
+ # unknown inferior through.
+ info_threads "1.1 3.*" \
+ "1.1"
+ gdb_test "thread apply 1.1 3.* p 1" \
+ "Thread 1.1.*warning: Unknown inferior 3"
+
# Now test a set of invalid thread IDs/ranges.
thr_apply_info_thr_invalid "1." \
thr_apply_info_thr_invalid "1-2.1" \
"1-2.1"
- thr_apply_info_thr_error "1-0" "inverted range"
- thr_apply_info_thr_error "1.1-0" "inverted range"
-
- thr_apply_info_thr_error "1-" "inverted range"
- thr_apply_info_thr_error "1.1-" "inverted range"
-
- thr_apply_info_thr_error "2-1" "inverted range"
- thr_apply_info_thr_error "1.2-1" "inverted range"
+ gdb_test "p \$zero = 0" " = 0"
+ gdb_test "p \$one = 1" " = 1"
+ gdb_test "p \$minus_one = -11" " = -11"
+ foreach prefix {"" "1." "$one."} {
+ set prefix_re [string_to_regexp $prefix]
+
+ thr_apply_info_thr_invalid "${prefix}foo"
+ thr_apply_info_thr_invalid "${prefix}1foo"
+ thr_apply_info_thr_invalid "${prefix}foo1"
+
+ thr_apply_info_thr_error "${prefix}1-0" "inverted range"
+ thr_apply_info_thr_error "${prefix}1-\$zero" "inverted range"
+ thr_apply_info_thr_error "${prefix}\$one-0" "inverted range"
+ thr_apply_info_thr_error "${prefix}\$one-\$zero" "inverted range"
+ thr_apply_info_thr_error "${prefix}1-" "inverted range"
+ thr_apply_info_thr_error "${prefix}2-1" "inverted range"
+ thr_apply_info_thr_error "${prefix}2-\$one" "inverted range"
+ thr_apply_info_thr_error "${prefix}-1" "negative value"
+ thr_apply_info_thr_error "${prefix}-\$one" "negative value"
+ thr_apply_info_thr_error "${prefix}\$minus_one" \
+ "negative value: ${prefix_re}\\\$minus_one"
+
+ thr_apply_info_thr_error "${prefix}1-*" "inverted range"
+ thr_apply_info_thr_invalid "${prefix}*1"
+ thr_apply_info_thr_invalid "${prefix}*foo"
+ thr_apply_info_thr_invalid "${prefix}foo*"
+ }
- thr_apply_info_thr_error "-1" "negative value"
- thr_apply_info_thr_error "1.-1" "negative value"
+ # Check that a valid thread ID list with a missing command errors
+ # out.
+ with_test_prefix "missing command" {
+ set output "Please specify a command following the thread ID list"
+ gdb_test "thread apply 1" $output
+ gdb_test "thread apply 1.1" $output
+ gdb_test "thread apply 1.1 1.2" $output
+ gdb_test "thread apply 1-2" $output
+ gdb_test "thread apply 1.1-2" $output
+ gdb_test "thread apply $thr" $output
+ gdb_test "thread apply 1.*" $output
+ }
# Check that we do parse the inferior number and don't confuse it.
gdb_test "info threads 3.1" \