-# Copyright (C) 2010 Free Software Foundation, Inc.
+# Copyright (C) 2010-2013 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# This file is part of the GDB testsuite. It tests the mechanism
-# exposing values to Python.
-
-if $tracelevel then {
- strace $tracelevel
-}
+# exposing breakpoints to Python.
load_lib gdb-python.exp
-set testfile "py-breakpoint"
-set srcfile ${testfile}.c
+standard_testfile
+
if { [prepare_for_testing ${testfile}.exp ${testfile} ${srcfile}] } {
return -1
}
-# Start with a fresh gdb.
-clean_restart ${testfile}
-
# Skip all tests if Python scripting is not enabled.
if { [skip_python_tests] } { continue }
-if ![runto_main] then {
- fail "Cannot run to main."
- return 0
+proc test_bkpt_basic { } {
+ global srcfile testfile hex decimal
+
+ with_test_prefix "test_bkpt_basic" {
+ # Start with a fresh gdb.
+ clean_restart ${testfile}
+
+ if ![runto_main] then {
+ fail "Cannot run to main."
+ return 0
+ }
+
+ # Initially there should be one breakpoint: main.
+ gdb_py_test_silent_cmd "python blist = gdb.breakpoints()" "Get Breakpoint List" 0
+ gdb_test "python print (blist\[0\])" "<gdb.Breakpoint object at $hex>" "Check obj exists"
+ gdb_test "python print (blist\[0\].location)" "main." "Check breakpoint location"
+
+ set mult_line [gdb_get_line_number "Break at multiply."]
+ gdb_breakpoint ${mult_line}
+ gdb_continue_to_breakpoint "Break at multiply."
+
+ # Check that the Python breakpoint code noted the addition of a
+ # breakpoint "behind the scenes".
+ gdb_py_test_silent_cmd "python blist = gdb.breakpoints()" "Get Breakpoint List" 0
+ gdb_test "python print (len(blist))" "2" "Check for two breakpoints"
+ gdb_test "python print (blist\[0\])" "<gdb.Breakpoint object at $hex>" "Check obj exists"
+ gdb_test "python print (blist\[0\].location)" "main." "Check breakpoint location"
+ gdb_test "python print (blist\[1\])" "<gdb.Breakpoint object at $hex>" "Check obj exists"
+
+ gdb_test "python print (blist\[1\].location)" "py-breakpoint\.c:${mult_line}*" \
+ "Check breakpoint location"
+
+ # Check hit and ignore counts.
+ gdb_test "python print (blist\[1\].hit_count)" "1" "Check breakpoint hit count"
+ gdb_py_test_silent_cmd "python blist\[1\].ignore_count = 4" "Set breakpoint hit count" 0
+ gdb_continue_to_breakpoint "Break at multiply."
+ gdb_test "python print (blist\[1\].hit_count)" "6" "Check breakpoint hit count"
+ gdb_test "print result" " = 545" "Check expected variable result after 6 iterations"
+
+ # Test breakpoint is enabled and disabled correctly..
+ gdb_breakpoint [gdb_get_line_number "Break at add."]
+ gdb_continue_to_breakpoint "Break at add."
+ gdb_test "python print (blist\[1\].enabled)" "True" "Check breakpoint enabled."
+ gdb_py_test_silent_cmd "python blist\[1\].enabled = False" "Set breakpoint disabled." 0
+ gdb_continue_to_breakpoint "Break at add."
+ gdb_py_test_silent_cmd "python blist\[1\].enabled = True" "Set breakpoint enabled." 0
+ gdb_continue_to_breakpoint "Break at multiply."
+
+ # Test other getters and setters.
+ gdb_py_test_silent_cmd "python blist = gdb.breakpoints()" "Get Breakpoint List" 0
+ gdb_test "python print (blist\[1\].thread)" "None" "Check breakpoint thread"
+ gdb_test "python print (blist\[1\].type == gdb.BP_BREAKPOINT)" "True" "Check breakpoint type"
+ gdb_test "python print (blist\[0\].number)" "1" "Check breakpoint number"
+ gdb_test "python print (blist\[1\].number)" "2" "Check breakpoint number"
+ gdb_test "python print (blist\[2\].number)" "3" "Check breakpoint number"
+ }
+}
+
+proc test_bkpt_deletion { } {
+ global srcfile testfile hex decimal
+
+ with_test_prefix test_bkpt_deletion {
+ # Start with a fresh gdb.
+ clean_restart ${testfile}
+
+ if ![runto_main] then {
+ fail "Cannot run to main."
+ return 0
+ }
+
+ # Test breakpoints are deleted correctly.
+ set deltst_location [gdb_get_line_number "Break at multiply."]
+ set end_location [gdb_get_line_number "Break at end."]
+ gdb_py_test_silent_cmd "python dp1 = gdb.Breakpoint (\"$deltst_location\")" "Set breakpoint" 0
+ gdb_breakpoint [gdb_get_line_number "Break at end."]
+ gdb_py_test_silent_cmd "python del_list = gdb.breakpoints()" "Get Breakpoint List" 0
+ gdb_test "python print (len(del_list))" "3" "Number of breakpoints before delete"
+ gdb_continue_to_breakpoint "Break at multiply." ".*/$srcfile:$deltst_location.*"
+ gdb_py_test_silent_cmd "python dp1.delete()" "Delete Breakpoint" 0
+ gdb_test "python print (dp1.number)" "RuntimeError: Breakpoint 2 is invalid.*" "Check breakpoint invalidated"
+ gdb_py_test_silent_cmd "python del_list = gdb.breakpoints()" "Get Breakpoint List" 0
+ gdb_test "python print (len(del_list))" "2" "Number of breakpoints after delete"
+ gdb_continue_to_breakpoint "Break at end." ".*/$srcfile:$end_location.*"
+ }
+}
+
+proc test_bkpt_cond_and_cmds { } {
+ global srcfile testfile hex decimal
+
+ with_test_prefix test_bkpt_cond_and_cmds {
+ # Start with a fresh gdb.
+ clean_restart ${testfile}
+
+ if ![runto_main] then {
+ fail "Cannot run to main."
+ return 0
+ }
+
+ # Test conditional setting.
+ set bp_location1 [gdb_get_line_number "Break at multiply."]
+ gdb_py_test_silent_cmd "python bp1 = gdb.Breakpoint (\"$bp_location1\")" "Set breakpoint" 0
+ gdb_continue_to_breakpoint "Break at multiply."
+ gdb_py_test_silent_cmd "python bp1.condition = \"i == 5\"" "Set breakpoint" 0
+ gdb_test "python print (bp1.condition)" "i == 5" "Test conditional has been set"
+ gdb_continue_to_breakpoint "Break at multiply."
+ gdb_test "print i" "5" "Test conditional breakpoint stopped after five iterations"
+ gdb_py_test_silent_cmd "python bp1.condition = None" "Clear condition" 0
+ gdb_test "python print (bp1.condition)" "None" "Test conditional read"
+ gdb_continue_to_breakpoint "Break at multiply."
+ gdb_test "print i" "6" "Test breakpoint stopped after six iterations"
+
+ # Test commands.
+ gdb_breakpoint [gdb_get_line_number "Break at add."]
+ set test {commands $bpnum}
+ gdb_test_multiple $test $test { -re "\r\n>$" { pass $test } }
+ set test {print "Command for breakpoint has been executed."}
+ gdb_test_multiple $test $test { -re "\r\n>$" { pass $test } }
+ set test {print result}
+ gdb_test_multiple $test $test { -re "\r\n>$" { pass $test } }
+ gdb_test "end"
+
+ gdb_py_test_silent_cmd "python blist = gdb.breakpoints()" "Get Breakpoint List" 0
+ gdb_test "python print (blist\[len(blist)-1\].commands)" "print \"Command for breakpoint has been executed.\".*print result"
+ }
}
-global hex decimal
-
-# Initially there should be one breakpoint: main.
-
-gdb_py_test_silent_cmd "python blist = gdb.breakpoints()" "Get Breakpoint List" 0
-gdb_test "python print blist\[0\]" "<gdb.Breakpoint object at $hex>" "Check obj exists"
-gdb_test "python print blist\[0\].location" "main." "Check breakpoint location"
-
-gdb_breakpoint [gdb_get_line_number "Break at multiply."]
-gdb_continue_to_breakpoint "Break at multiply."
-
-# Check that the Python breakpoint code noted the addition of a
-# breakpoint "behind the scenes".
-gdb_py_test_silent_cmd "python blist = gdb.breakpoints()" "Get Breakpoint List" 0
-gdb_test "python print len(blist)" "2" "Check for two breakpoints"
-gdb_test "python print blist\[0\]" "<gdb.Breakpoint object at $hex>" "Check obj exists"
-gdb_test "python print blist\[0\].location" "main." "Check breakpoint location"
-gdb_test "python print blist\[1\]" "<gdb.Breakpoint object at $hex>" "Check obj exists"
-gdb_test "python print blist\[1\].location" "py-breakpoint\.c:41*" "Check breakpoint location"
-
-# Check hit and ignore counts.
-gdb_test "python print blist\[1\].hit_count" "1" "Check breakpoint hit count"
-gdb_py_test_silent_cmd "python blist\[1\].ignore_count = 4" "Set breakpoint hit count" 0
-gdb_continue_to_breakpoint "Break at multiply."
-gdb_test "python print blist\[1\].hit_count" "6" "Check breakpoint hit count"
-gdb_test "print result" "545" "Check expected variable result after 6 iterations"
-
-# Test breakpoint is enabled and disabled correctly..
-gdb_breakpoint [gdb_get_line_number "Break at add."]
-gdb_continue_to_breakpoint "Break at add."
-gdb_test "python print blist\[1\].enabled" "True" "Check breakpoint enabled."
-gdb_py_test_silent_cmd "python blist\[1\].enabled = False" "Set breakpoint disabled." 0
-gdb_continue_to_breakpoint "Break at add."
-gdb_py_test_silent_cmd "python blist\[1\].enabled = True" "Set breakpoint enabled." 0
-gdb_continue_to_breakpoint "Break at multiply."
-
-# Test other getters and setters.
-gdb_py_test_silent_cmd "python blist = gdb.breakpoints()" "Get Breakpoint List" 0
-gdb_test "python print blist\[1\].thread" "None" "Check breakpoint thread"
-gdb_test "python print blist\[1\].type == gdb.BP_BREAKPOINT" "True" "Check breakpoint type"
-gdb_test "python print blist\[0\].number" "1" "Check breakpoint number"
-gdb_test "python print blist\[1\].number" "2" "Check breakpoint number"
-gdb_test "python print blist\[2\].number" "3" "Check breakpoint number"
-
-# Start with a fresh gdb.
-clean_restart ${testfile}
-
-if ![runto_main] then {
- fail "Cannot run to main."
- return 0
+proc test_bkpt_invisible { } {
+ global srcfile testfile hex decimal
+
+ with_test_prefix test_bkpt_invisible {
+ # Start with a fresh gdb.
+ clean_restart ${testfile}
+
+ if ![runto_main] then {
+ fail "Cannot run to main."
+ return 0
+ }
+
+ delete_breakpoints
+ set ibp_location [gdb_get_line_number "Break at multiply."]
+ gdb_py_test_silent_cmd "python ibp = gdb.Breakpoint(\"$ibp_location\", internal=False)" "Set invisible breakpoint" 0
+ gdb_py_test_silent_cmd "python ilist = gdb.breakpoints()" "Get Breakpoint List" 0
+ gdb_test "python print (ilist\[0\])" "<gdb.Breakpoint object at $hex>" "Check invisible bp obj exists"
+ gdb_test "python print (ilist\[0\].location)" "py-breakpoint\.c:$ibp_location*" "Check breakpoint location"
+ gdb_test "python print (ilist\[0\].visible)" "True" "Check breakpoint visibility"
+ gdb_test "info breakpoints" "py-breakpoint\.c:$ibp_location.*" "Check info breakpoints shows visible breakpoints"
+ delete_breakpoints
+ gdb_py_test_silent_cmd "python ibp = gdb.Breakpoint(\"$ibp_location\", internal=True)" "Set invisible breakpoint" 0
+ gdb_py_test_silent_cmd "python ilist = gdb.breakpoints()" "Get Breakpoint List" 0
+ gdb_test "python print (ilist\[0\])" "<gdb.Breakpoint object at $hex>" "Check invisible bp obj exists"
+ gdb_test "python print (ilist\[0\].location)" "py-breakpoint\.c:$ibp_location*" "Check breakpoint location"
+ gdb_test "python print (ilist\[0\].visible)" "False" "Check breakpoint visibility"
+ gdb_test "info breakpoints" "No breakpoints or watchpoints.*" "Check info breakpoints does not show invisible breakpoints"
+ gdb_test "maint info breakpoints" "py-breakpoint\.c:$ibp_location.*" "Check maint info breakpoints shows invisible breakpoints"
+ }
}
-# Test conditional setting.
-set bp_location1 [gdb_get_line_number "Break at multiply."]
-gdb_py_test_silent_cmd "python bp1 = gdb.Breakpoint (\"$bp_location1\")" "Set breakpoint" 0
-gdb_continue_to_breakpoint "Break at multiply."
-gdb_py_test_silent_cmd "python bp1.condition = \"i == 5\"" "Set breakpoint" 0
-gdb_test "python print bp1.condition" "i == 5" "Test conditional has been set"
-gdb_continue_to_breakpoint "Break at multiply."
-gdb_test "print i" "5" "Test conditional breakpoint stopped after five iterations"
-gdb_py_test_silent_cmd "python bp1.condition = None" "Clear condition" 0
-gdb_test "python print bp1.condition" "None" "Test conditional read"
-gdb_continue_to_breakpoint "Break at multiply."
-gdb_test "print i" "6" "Test breakpoint stopped after six iterations"
-
-# Test commands.
-gdb_breakpoint [gdb_get_line_number "Break at add."]
-set test {commands $bpnum}
-gdb_test_multiple $test $test { -re "\r\n>$" { pass $test } }
-set test {print "Command for breakpoint has been executed."}
-gdb_test_multiple $test $test { -re "\r\n>$" { pass $test } }
-set test {print result}
-gdb_test_multiple $test $test { -re "\r\n>$" { pass $test } }
-gdb_test "end"
-
-gdb_py_test_silent_cmd "python blist = gdb.breakpoints()" "Get Breakpoint List" 0
-gdb_test "python print blist\[len(blist)-1\].commands" "print \"Command for breakpoint has been executed.\".*print result"
-
-# Start with a fresh gdb.
-clean_restart ${testfile}
-
-if ![runto_main] then {
- fail "Cannot run to main."
- return 0
+proc test_watchpoints { } {
+ global srcfile testfile hex decimal
+
+ with_test_prefix test_watchpoints {
+ # Start with a fresh gdb.
+ clean_restart ${testfile}
+
+ # Disable hardware watchpoints if necessary.
+ if [target_info exists gdb,no_hardware_watchpoints] {
+ gdb_test_no_output "set can-use-hw-watchpoints 0" ""
+ }
+
+ if ![runto_main] then {
+ fail "Cannot run to main."
+ return 0
+ }
+
+ gdb_py_test_silent_cmd "python wp1 = gdb.Breakpoint (\"result\", type=gdb.BP_WATCHPOINT, wp_class=gdb.WP_WRITE )" "Set watchpoint" 0
+ gdb_test "continue" ".*\[Ww\]atchpoint.*result.*Old value = 0.*New value = 25.*main.*" "Test watchpoint write"
+ }
}
-# Test invisible breakpooints.
-delete_breakpoints
-set ibp_location [gdb_get_line_number "Break at multiply."]
-gdb_py_test_silent_cmd "python ibp = gdb.Breakpoint(\"$ibp_location\", internal=False)" "Set invisible breakpoint" 0
-gdb_py_test_silent_cmd "python ilist = gdb.breakpoints()" "Get Breakpoint List" 0
-gdb_test "python print ilist\[0\]" "<gdb.Breakpoint object at $hex>" "Check invisible bp obj exists"
-gdb_test "python print ilist\[0\].location" "py-breakpoint\.c:$ibp_location*" "Check breakpoint location"
-gdb_test "python print ilist\[0\].visible" "True" "Check breakpoint visibility"
-gdb_test "info breakpoints" "py-breakpoint\.c:$ibp_location.*" "Check info breakpoints shows visible breakpoints"
-delete_breakpoints
-gdb_py_test_silent_cmd "python ibp = gdb.Breakpoint(\"$ibp_location\", internal=True)" "Set invisible breakpoint" 0
-gdb_py_test_silent_cmd "python ilist = gdb.breakpoints()" "Get Breakpoint List" 0
-gdb_test "python print ilist\[0\]" "<gdb.Breakpoint object at $hex>" "Check invisible bp obj exists"
-gdb_test "python print ilist\[0\].location" "py-breakpoint\.c:$ibp_location*" "Check breakpoint location"
-gdb_test "python print ilist\[0\].visible" "False" "Check breakpoint visibility"
-gdb_test "info breakpoints" "No breakpoints or watchpoints.*" "Check info breakpoints does not show invisible breakpoints"
-gdb_test "maint info breakpoints" "py-breakpoint\.c:$ibp_location.*" "Check maint info breakpoints shows invisible breakpoints"
-
-
-# Watchpoints
-# Start with a fresh gdb.
-clean_restart ${testfile}
-
-# Disable hardware watchpoints if necessary.
-if [target_info exists gdb,no_hardware_watchpoints] {
- gdb_test_no_output "set can-use-hw-watchpoints 0" ""
+proc test_bkpt_internal { } {
+ global srcfile testfile hex decimal
+
+ with_test_prefix test_bkpt_internal {
+ # Start with a fresh gdb.
+ clean_restart ${testfile}
+
+ # Disable hardware watchpoints if necessary.
+ if [target_info exists gdb,no_hardware_watchpoints] {
+ gdb_test_no_output "set can-use-hw-watchpoints 0" ""
+ }
+ if ![runto_main] then {
+ fail "Cannot run to main."
+ return 0
+ }
+ delete_breakpoints
+ gdb_py_test_silent_cmd "python wp1 = gdb.Breakpoint (\"result\", type=gdb.BP_WATCHPOINT, wp_class=gdb.WP_WRITE, internal=True )" "Set watchpoint" 0
+ gdb_test "info breakpoints" "No breakpoints or watchpoints.*" "Check info breakpoints does not show invisible breakpoints"
+ gdb_test "maint info breakpoints" ".*watchpoint.*result.*" "Check maint info breakpoints shows invisible breakpoints"
+ gdb_test "continue" ".*\[Ww\]atchpoint.*result.*Old value = 0.*New value = 25.*" "Test watchpoint write"
+ }
}
-if ![runto_main] then {
- fail "Cannot run to main."
- return 0
+proc test_bkpt_eval_funcs { } {
+ global srcfile testfile hex decimal
+
+ with_test_prefix test_bkpt_eval_funcs {
+ # Start with a fresh gdb.
+ clean_restart ${testfile}
+
+ # Disable hardware watchpoints if necessary.
+ if [target_info exists gdb,no_hardware_watchpoints] {
+ gdb_test_no_output "set can-use-hw-watchpoints 0" ""
+ }
+ if ![runto_main] then {
+ fail "Cannot run to main."
+ return 0
+ }
+ delete_breakpoints
+
+ gdb_py_test_multiple "Sub-class a breakpoint" \
+ "python" "" \
+ "class bp_eval (gdb.Breakpoint):" "" \
+ " inf_i = 0" "" \
+ " count = 0" "" \
+ " def stop (self):" "" \
+ " self.count = self.count + 1" "" \
+ " self.inf_i = gdb.parse_and_eval(\"i\")" "" \
+ " if self.inf_i == 3:" "" \
+ " return True" "" \
+ " return False" "" \
+ "end" ""
+
+ gdb_py_test_multiple "Sub-class a second breakpoint" \
+ "python" "" \
+ "class bp_also_eval (gdb.Breakpoint):" "" \
+ " count = 0" "" \
+ " def stop (self):" "" \
+ " self.count = self.count + 1" "" \
+ " if self.count == 9:" "" \
+ " return True" "" \
+ " return False" "" \
+ "end" ""
+
+ gdb_py_test_multiple "Sub-class a third breakpoint" \
+ "python" "" \
+ "class basic (gdb.Breakpoint):" "" \
+ " count = 0" "" \
+ "end" ""
+
+ set bp_location2 [gdb_get_line_number "Break at multiply."]
+ set end_location [gdb_get_line_number "Break at end."]
+ gdb_py_test_silent_cmd "python eval_bp1 = bp_eval(\"$bp_location2\")" "Set breakpoint" 0
+ gdb_py_test_silent_cmd "python also_eval_bp1 = bp_also_eval(\"$bp_location2\")" "Set breakpoint" 0
+ gdb_py_test_silent_cmd "python never_eval_bp1 = bp_also_eval(\"$end_location\")" "Set breakpoint" 0
+ gdb_continue_to_breakpoint "Break at multiply." ".*/$srcfile:$bp_location2.*"
+ gdb_test "print i" "3" "Check inferior value matches python accounting"
+ gdb_test "python print (eval_bp1.inf_i)" "3" "Check python accounting matches inferior"
+ gdb_test "python print (also_eval_bp1.count)" "4" \
+ "Check non firing same-location breakpoint eval function was also called at each stop."
+ gdb_test "python print (eval_bp1.count)" "4" \
+ "Check non firing same-location breakpoint eval function was also called at each stop."
+
+ delete_breakpoints
+ set cond_bp [gdb_get_line_number "Break at multiply."]
+ gdb_py_test_silent_cmd "python eval_bp1 = bp_eval(\"$cond_bp\")" "Set breakpoint" 0
+ set test_cond {cond $bpnum}
+ gdb_test "$test_cond \"foo==3\"" "Cannot set a condition where a Python.*" \
+ "Check you cannot add a CLI condition to a Python breakpoint that" \
+ "has defined stop"
+ gdb_py_test_silent_cmd "python eval_bp2 = basic(\"$cond_bp\")" "Set breakpoint" 0
+ gdb_py_test_silent_cmd "python eval_bp2.condition = \"1==1\"" "Set a condition" 0
+ gdb_py_test_multiple "Construct an eval function" \
+ "python" "" \
+ "def stop_func ():" "" \
+ " return True" "" \
+ "end" ""
+
+ gdb_test "python eval_bp2.stop = stop_func" \
+ "RuntimeError: Cannot set 'stop' method.*" \
+ "Assign stop function to a breakpoint that has a condition"
+
+ delete_breakpoints
+ gdb_breakpoint [gdb_get_line_number "Break at multiply."]
+ gdb_py_test_silent_cmd "python check_eval = bp_eval(\"$bp_location2\")" "Set breakpoint" 0
+ gdb_test "python print (check_eval.count)" "0" \
+ "Test that evaluate function has not been yet executed (ie count = 0)"
+ gdb_continue_to_breakpoint "Break at multiply." ".*/$srcfile:$bp_location2.*"
+ gdb_test "python print (check_eval.count)" "1" \
+ "Test that evaluate function is run when location also has normal bp"
+
+ gdb_py_test_multiple "Sub-class a watchpoint" \
+ "python" "" \
+ "class wp_eval (gdb.Breakpoint):" "" \
+ " def stop (self):" "" \
+ " self.result = gdb.parse_and_eval(\"result\")" "" \
+ " if self.result == 788:" "" \
+ " return True" "" \
+ " return False" "" \
+ "end" ""
+
+ delete_breakpoints
+ gdb_py_test_silent_cmd "python wp1 = wp_eval (\"result\", type=gdb.BP_WATCHPOINT, wp_class=gdb.WP_WRITE)" "Set watchpoint" 0
+ gdb_test "continue" ".*\[Ww\]atchpoint.*result.*Old value =.*New value = 788.*" "Test watchpoint write"
+ gdb_test "python print (never_eval_bp1.count)" "0" \
+ "Check that this unrelated breakpoints eval function was never called."
+ }
}
-gdb_py_test_silent_cmd "python wp1 = gdb.Breakpoint (\"result\", type=gdb.BP_WATCHPOINT, wp_class=gdb.WP_WRITE )" "Set watchpoint" 0
-gdb_test "continue" ".*\[Ww\]atchpoint.*result.*Old value = 0.*New value = 25.*main.*" "Test watchpoint write"
+proc test_bkpt_temporary { } {
+ global srcfile testfile hex decimal
-# Internal breakpoints.
+ with_test_prefix test_bkpt_temporary {
+ # Start with a fresh gdb.
+ clean_restart ${testfile}
-# Start with a fresh gdb.
-clean_restart ${testfile}
+ if ![runto_main] then {
+ fail "Cannot run to main."
+ return 0
+ }
+ delete_breakpoints
-if ![runto_main] then {
- fail "Cannot run to main."
- return 0
+ gdb_py_test_multiple "Sub-class and check temporary breakpoint" \
+ "python" "" \
+ "class temp_bp (gdb.Breakpoint):" "" \
+ " count = 0" "" \
+ " def stop (self):" "" \
+ " self.count = self.count + 1" "" \
+ " return True" "" \
+ "end" ""
+ set ibp_location [gdb_get_line_number "Break at multiply."]
+ gdb_py_test_silent_cmd "python ibp = temp_bp(\"$ibp_location\", temporary=True)" \
+ "Set temporary breakpoint" 0
+ gdb_test "info breakpoints" "2.*breakpoint.*del.*py-breakpoint\.c:$ibp_location.*" \
+ "Check info breakpoints shows breakpoint with temporary status"
+ gdb_test "python print (ibp.location)" "py-breakpoint\.c:$ibp_location*" \
+ "Check temporary breakpoint location"
+ gdb_test "python print (ibp.temporary)" "True" \
+ "Check breakpoint temporary status"
+ gdb_continue_to_breakpoint "Break at multiply." ".*/$srcfile:$ibp_location.*"
+ gdb_test "python print (ibp.count)" "1" \
+ "Check temporary stop callback executed before deletion."
+ gdb_test "python print (ibp.temporary)" "RuntimeError: Breakpoint 2 is invalid.*" \
+ "Check temporary breakpoint is deleted after being hit"
+ gdb_test "info breakpoints" "No breakpoints or watchpoints.*" \
+ "Check info breakpoints shows temporary breakpoint is deleted"
+ }
}
-delete_breakpoints
-gdb_py_test_silent_cmd "python wp1 = gdb.Breakpoint (\"result\", type=gdb.BP_WATCHPOINT, wp_class=gdb.WP_WRITE, internal=True )" "Set watchpoint" 0
-gdb_test "info breakpoints" "No breakpoints or watchpoints.*" "Check info breakpoints does not show invisible breakpoints"
-gdb_test "maint info breakpoints" ".*hw watchpoint.*result.*" "Check maint info breakpoints shows invisible breakpoints"
-gdb_test "continue" ".*\[Ww\]atchpoint.*result.*Old value = 0.*New value = 25.*" "Test watchpoint write"
+
+test_bkpt_basic
+test_bkpt_deletion
+test_bkpt_cond_and_cmds
+test_bkpt_invisible
+test_watchpoints
+test_bkpt_internal
+test_bkpt_eval_funcs
+test_bkpt_temporary
projects / deliverable / binutils-gdb.git / blobdiff