return
}
-proc test {type symbol} { with_test_prefix "$type" {
- global testfile subdir srcdir gdb_prompt
-
- set srcfile_type ${srcdir}/${subdir}/${testfile}-${type}.c
-
- # no threads
-
- with_test_prefix "singlethreaded" {
- set executable ${testfile}-${type}-st
- set srcfile_main ${testfile}-st.c
- if {[build_executable $testfile.exp $executable \
- [list $srcfile_main ${testfile}-${type}.c] \
- [list debug additional_flags=-D$symbol]] == -1} {
- return -1
+proc test {type symbol} {
+ with_test_prefix "$type" {
+ global testfile subdir srcdir gdb_prompt
+
+ set srcfile_type ${srcdir}/${subdir}/${testfile}-${type}.c
+
+ # no threads
+
+ with_test_prefix "singlethreaded" {
+ set executable ${testfile}-${type}-st
+ set srcfile_main ${testfile}-st.c
+ if {[build_executable $testfile.exp $executable \
+ [list $srcfile_main ${testfile}-${type}.c] \
+ [list debug additional_flags=-D$symbol]] == -1} {
+ return -1
+ }
+
+ clean_restart $executable
+
+ if [target_info exists gdb,no_hardware_watchpoints] {
+ # The software watchpoint functionality is in GDB an unrelated test.
+ gdb_test_no_output "set can-use-hw-watchpoints 0"
+ }
+
+ gdb_test "show detach-on-fork" "Whether gdb will detach the child of a fork is on\\."
+ gdb_test_no_output "set follow-fork-mode $type"
+ gdb_test "show follow-fork-mode" "Debugger response to a program call of fork or vfork is \"$type\"\\."
+ # Testcase uses it for the `follow-fork-mode child' type.
+ gdb_test "handle SIGUSR1 nostop noprint pass" "No\[ \t\]+No\[ \t\]+Yes.*"
+
+ if ![runto_main] {
+ return
+ }
+
+ gdb_test "watch var" "atchpoint \[0-9\]+: var" "Set the watchpoint"
+
+ # It is never hit but it should not be left over in the fork()ed-off child.
+ if [skip_hw_breakpoint_tests] {
+ set hbreak "break"
+ } else {
+ set hbreak "hbreak"
+ }
+ gdb_test "$hbreak marker"
+
+ gdb_breakpoint "mark_exit"
+
+ gdb_test "continue" \
+ "reakpoint \[0-9\]+, marker.*" "hardware breakpoints work"
+ gdb_test "continue" \
+ "atchpoint \[0-9\]+: var.*Old value = 0.*New value = 1.*forkoff *\\(1\\).*" "watchpoints work"
+ gdb_test "continue" \
+ "reakpoint \[0-9\]+, marker.*" "breakpoint after the first fork"
+ gdb_test "continue" \
+ "atchpoint \[0-9\]+: var.*Old value = 1.*New value = 2.*forkoff *\\(2\\).*" "watchpoint after the first fork"
+ gdb_test "continue" \
+ "reakpoint \[0-9\]+, marker.*" "breakpoint after the second fork"
+ gdb_test "continue" \
+ "atchpoint \[0-9\]+: var.*Old value = 2.*New value = 3.*mark_exit \\(\\);" "watchpoint after the second fork"
+ gdb_test "continue" "Continuing\\..*\r\nBreakpoint \[0-9\]+, mark_exit .*" "finish"
}
- clean_restart $executable
+ # threads
if [target_info exists gdb,no_hardware_watchpoints] {
- # The software watchpoint functionality is in GDB an unrelated test.
- gdb_test_no_output "set can-use-hw-watchpoints 0"
- }
-
- gdb_test "show detach-on-fork" "Whether gdb will detach the child of a fork is on\\."
- gdb_test_no_output "set follow-fork-mode $type"
- gdb_test "show follow-fork-mode" "Debugger response to a program call of fork or vfork is \"$type\"\\."
- # Testcase uses it for the `follow-fork-mode child' type.
- gdb_test "handle SIGUSR1 nostop noprint pass" "No\[ \t\]+No\[ \t\]+Yes.*"
-
- if ![runto_main] {
- return
- }
-
- gdb_test "watch var" "atchpoint \[0-9\]+: var" "Set the watchpoint"
-
- # It is never hit but it should not be left over in the fork()ed-off child.
- if [skip_hw_breakpoint_tests] {
- set hbreak "break"
- } else {
- set hbreak "hbreak"
- }
- gdb_test "$hbreak marker"
-
- gdb_breakpoint "mark_exit"
-
- gdb_test "continue" \
- "reakpoint \[0-9\]+, marker.*" "hardware breakpoints work"
- gdb_test "continue" \
- "atchpoint \[0-9\]+: var.*Old value = 0.*New value = 1.*forkoff *\\(1\\).*" "watchpoints work"
- gdb_test "continue" \
- "reakpoint \[0-9\]+, marker.*" "breakpoint after the first fork"
- gdb_test "continue" \
- "atchpoint \[0-9\]+: var.*Old value = 1.*New value = 2.*forkoff *\\(2\\).*" "watchpoint after the first fork"
- gdb_test "continue" \
- "reakpoint \[0-9\]+, marker.*" "breakpoint after the second fork"
- gdb_test "continue" \
- "atchpoint \[0-9\]+: var.*Old value = 2.*New value = 3.*mark_exit \\(\\);" "watchpoint after the second fork"
- gdb_test "continue" "Continuing\\..*\r\nBreakpoint \[0-9\]+, mark_exit .*" "finish"
- }
-
- # threads
-
- if [target_info exists gdb,no_hardware_watchpoints] {
- # Watchpoint hits would get detected in unexpected threads.
- return
- }
-
- with_test_prefix "multithreaded" {
- set executable ${testfile}-${type}-mt
- set srcfile_main ${srcdir}/${subdir}/${testfile}-mt.c
- if { [gdb_compile_pthreads "${srcfile_main} ${srcfile_type}" [standard_output_file ${executable}] executable [list debug "additional_flags=-D$symbol -DTHREAD"]] != "" } {
- untested ${testfile}.exp
+ # Watchpoint hits would get detected in unexpected threads.
return
}
- clean_restart $executable
-
- gdb_test_no_output "set follow-fork-mode $type"
- # Testcase uses it for the `follow-fork-mode child' type.
- gdb_test "handle SIGUSR1 nostop noprint pass" "No\[ \t\]+No\[ \t\]+Yes.*"
- if ![runto_main] {
- return
+ with_test_prefix "multithreaded" {
+ set executable ${testfile}-${type}-mt
+ set srcfile_main ${srcdir}/${subdir}/${testfile}-mt.c
+ if { [gdb_compile_pthreads "${srcfile_main} ${srcfile_type}" [standard_output_file ${executable}] executable [list debug "additional_flags=-D$symbol -DTHREAD"]] != "" } {
+ untested ${testfile}.exp
+ return
+ }
+ clean_restart $executable
+
+ gdb_test_no_output "set follow-fork-mode $type"
+ # Testcase uses it for the `follow-fork-mode child' type.
+ gdb_test "handle SIGUSR1 nostop noprint pass" "No\[ \t\]+No\[ \t\]+Yes.*"
+
+ if ![runto_main] {
+ return
+ }
+
+ gdb_test "watch var" "atchpoint \[0-9\]+: var" "Set the watchpoint"
+
+ # It should not be left over in the fork()ed-off child.
+ gdb_test "$hbreak marker" {reakpoint [0-9]+.*}
+
+ gdb_breakpoint "mark_exit"
+
+ gdb_test "continue" \
+ "reakpoint \[0-9\]+, marker.*" "hardware breakpoints work"
+ gdb_test "continue" \
+ "atchpoint \[0-9\]+: var.*Old value = 0.*New value = 1.*validity-first.*" "singlethread watchpoints work"
+ gdb_test "continue" \
+ "atchpoint \[0-9\]+: var.*Old value = 1.*New value = 2.*validity-thread-A.*" "multithreaded watchpoints work at A"
+ gdb_test "continue" \
+ "atchpoint \[0-9\]+: var.*Old value = 2.*New value = 3.*validity-thread-B.*" "multithreaded watchpoints work at B"
+ gdb_test "continue" \
+ "reakpoint \[0-9\]+, marker.*" "breakpoint (A) after the first fork"
+ gdb_test "continue" \
+ "atchpoint \[0-9\]+: var.*Old value = 3.*New value = 4.*after-fork1-A.*" "watchpoint A after the first fork"
+ gdb_test "continue" \
+ "atchpoint \[0-9\]+: var.*Old value = 4.*New value = 5.*after-fork1-B.*" "watchpoint B after the first fork"
+ gdb_test "continue" \
+ "reakpoint \[0-9\]+, marker.*" "breakpoint (A) after the second fork"
+ gdb_test "continue" \
+ "atchpoint \[0-9\]+: var.*Old value = 5.*New value = 6.*after-fork2-A.*" "watchpoint A after the second fork"
+ gdb_test "continue" \
+ "atchpoint \[0-9\]+: var.*Old value = 6.*New value = 7.*after-fork2-B.*" "watchpoint B after the second fork"
+ gdb_test "continue" "Continuing\\..*\r\nBreakpoint \[0-9\]+, mark_exit .*" "finish"
}
-
- gdb_test "watch var" "atchpoint \[0-9\]+: var" "Set the watchpoint"
-
- # It should not be left over in the fork()ed-off child.
- gdb_test "$hbreak marker" {reakpoint [0-9]+.*}
-
- gdb_breakpoint "mark_exit"
-
- gdb_test "continue" \
- "reakpoint \[0-9\]+, marker.*" "hardware breakpoints work"
- gdb_test "continue" \
- "atchpoint \[0-9\]+: var.*Old value = 0.*New value = 1.*validity-first.*" "singlethread watchpoints work"
- gdb_test "continue" \
- "atchpoint \[0-9\]+: var.*Old value = 1.*New value = 2.*validity-thread-A.*" "multithreaded watchpoints work at A"
- gdb_test "continue" \
- "atchpoint \[0-9\]+: var.*Old value = 2.*New value = 3.*validity-thread-B.*" "multithreaded watchpoints work at B"
- gdb_test "continue" \
- "reakpoint \[0-9\]+, marker.*" "breakpoint (A) after the first fork"
- gdb_test "continue" \
- "atchpoint \[0-9\]+: var.*Old value = 3.*New value = 4.*after-fork1-A.*" "watchpoint A after the first fork"
- gdb_test "continue" \
- "atchpoint \[0-9\]+: var.*Old value = 4.*New value = 5.*after-fork1-B.*" "watchpoint B after the first fork"
- gdb_test "continue" \
- "reakpoint \[0-9\]+, marker.*" "breakpoint (A) after the second fork"
- gdb_test "continue" \
- "atchpoint \[0-9\]+: var.*Old value = 5.*New value = 6.*after-fork2-A.*" "watchpoint A after the second fork"
- gdb_test "continue" \
- "atchpoint \[0-9\]+: var.*Old value = 6.*New value = 7.*after-fork2-B.*" "watchpoint B after the second fork"
- gdb_test "continue" "Continuing\\..*\r\nBreakpoint \[0-9\]+, mark_exit .*" "finish"
}
-}}
+}
test parent FOLLOW_PARENT
projects / deliverable / binutils-gdb.git / blobdiff