-# Copyright 2011-2012 Free Software Foundation, Inc.
+# Copyright 2011-2015 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
-load_lib "trace-support.exp";
+load_lib "trace-support.exp"
if {[skip_shlib_tests]} {
return 0
}
-set testfile "change-loc"
+standard_testfile
set libfile1 "change-loc-1"
set libfile2 "change-loc-2"
-set srcfile $testfile.c
set executable $testfile
set libsrc1 $srcdir/$subdir/$libfile1.c
set libsrc2 $srcdir/$subdir/$libfile2.c
-set binfile $objdir/$subdir/$testfile
-set lib_sl1 $objdir/$subdir/$libfile1.sl
-set lib_sl2 $objdir/$subdir/$libfile2.sl
+set lib_sl1 [standard_output_file $libfile1.sl]
+set lib_sl2 [standard_output_file $libfile2.sl]
set lib_opts debug
-if [get_compiler_info ${binfile}] {
+if [get_compiler_info] {
return -1
}
if { ![gdb_target_supports_trace] } then {
unsupported "Current target does not support trace"
- return -1;
+ return -1
}
if [is_amd64_regs_target] {
# Set tracepoint during tracing experiment.
-proc tracepoint_change_loc_1 { trace_type } { with_test_prefix "1 $trace_type" {
- global testfile
- global srcfile
- global pcreg
- global gdb_prompt
-
- clean_restart ${testfile}
- if ![runto_main] {
- fail "Can't run to main"
- return -1
- }
- gdb_test_no_output "delete break 1"
-
- # Set a tracepoint we'll never meet. Just to avoid the complain after
- # type `tstart' later.
- gdb_test "next" ".*"
- gdb_test "trace main" "Tracepoint \[0-9\] at.* file .*$srcfile, line.*" \
- "set tracepoint on main"
-
- gdb_test "break marker" "Breakpoint.*at.* file .*$srcfile, line.*" \
- "breakpoint on marker"
-
- gdb_test_no_output "tstart"
-
- gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \
- "continue to marker 1"
- # Set a tracepoint during tracing.
- set test "set tracepoint on set_tracepoint"
- gdb_test_multiple "${trace_type} set_tracepoint" $test {
- -re "Target returns error code .* too far .*$gdb_prompt $" {
- if [string equal $trace_type "ftrace"] {
- # The target was unable to install the fast tracepoint
- # (e.g., jump pad too far from tracepoint).
- pass "$test (too far)"
- } else {
- fail $test
- }
+proc tracepoint_change_loc_1 { trace_type } {
+ with_test_prefix "1 $trace_type" {
+ global testfile
+ global srcfile
+ global pcreg
+ global gdb_prompt
+
+ clean_restart ${testfile}
+ if ![runto_main] {
+ fail "Can't run to main"
+ return -1
}
- -re "\r\n$gdb_prompt $" {
- pass $test
+ gdb_test_no_output "delete break 1"
+
+ # Set a tracepoint we'll never meet. Just to avoid the
+ # complain after type `tstart' later.
+ gdb_test "next" ".*"
+ gdb_test "trace main" \
+ "Tracepoint \[0-9\] at.* file .*$srcfile, line.*" \
+ "set tracepoint on main"
+
+ gdb_test "break marker" \
+ "Breakpoint.*at.* file .*$srcfile, line.*" \
+ "breakpoint on marker"
+
+ gdb_test_no_output "tstart"
+
+ gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \
+ "continue to marker 1"
+ # Set a tracepoint during tracing.
+ set test "set tracepoint on set_tracepoint"
+ gdb_test_multiple "${trace_type} set_tracepoint" $test {
+ -re "Target returns error code .* too far .*$gdb_prompt $" {
+ if [string equal $trace_type "ftrace"] {
+ # The target was unable to install the fast tracepoint
+ # (e.g., jump pad too far from tracepoint).
+ pass "$test (too far)"
+ } else {
+ fail $test
+ }
+ }
+ -re "\r\n$gdb_prompt $" {
+ pass $test
+ }
}
- }
- gdb_trace_setactions "set action for tracepoint" "" \
- "collect \$$pcreg" "^$"
+ gdb_trace_setactions "set action for tracepoint" "" \
+ "collect \$$pcreg" "^$"
- # tracepoint has two locations after shlib change-loc-1 is loaded.
- gdb_test "info trace" \
- "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+ # tracepoint has two locations after shlib change-loc-1 is loaded.
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
\[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\<MULTIPLE\>.*4\.1.* in func4.*4\.2.* in func4.*" \
- "tracepoint with two locations"
-
- set test "continue to marker 2"
- gdb_test_multiple "continue" $test {
- -re "Target returns error code .* too far .*$gdb_prompt $" {
- if [string equal $trace_type "ftrace"] {
- # Expected if the target was unable to install the
- # fast tracepoint (e.g., jump pad too far from
- # tracepoint).
- pass "$test (too far)"
- # Skip the rest of the tests.
- return
- } else {
- fail "continue to marker 2"
- fail $test
- }
-
- }
- -re ".*Breakpoint.*marker.*at.*$srcfile.*$gdb_prompt $" {
- pass "continue to marker 2"
- }
- }
+ "tracepoint with two locations"
+
+ set test "continue to marker 2"
+ gdb_test_multiple "continue" $test {
+ -re "Target returns error code .* too far .*$gdb_prompt $" {
+ if [string equal $trace_type "ftrace"] {
+ # Expected if the target was unable to install the
+ # fast tracepoint (e.g., jump pad too far from
+ # tracepoint).
+ pass "$test (too far)"
+ # Skip the rest of the tests.
+ return
+ } else {
+ fail "continue to marker 2"
+ fail $test
+ }
+
+ }
+ -re ".*Breakpoint.*marker.*at.*$srcfile.*$gdb_prompt $" {
+ pass "continue to marker 2"
+ }
+ }
- # tracepoint has three locations after shlib change-loc-2 is loaded.
- gdb_test "info trace" \
- "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+ # tracepoint has three locations after shlib change-loc-2 is
+ # loaded.
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
\[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\<MULTIPLE\>.*4\.1.* in func4.*4\.2.* in func4.*4\.3.* in func4 .*" \
- "tracepoint with three locations"
+ "tracepoint with three locations"
- gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \
- "continue to marker 3"
+ gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \
+ "continue to marker 3"
- # shlib is unloaded, there are still three locations, but one is pending.
- gdb_test "info trace" \
- "Num Type\[ \]+Disp Enb Address\[ \]+What.*
-\[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\<MULTIPLE\>.*4\.1.* in func4.*4\.2.* in func4.*4\.3.* \<PENDING\>\[\t \]+set_tracepoint.*" \
- "tracepoint with two locations (unload)"
+ # shlib is unloaded, there are still three locations, but one
+ # is pending.
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\<MULTIPLE\>.*
+4\.1.* in func4.*\tinstalled on target\r\n(4\.2.* in func4.*\tinstalled on target\r\n4\.3.* \<PENDING\>\[\t \]+set_tracepoint|4\.2.* \<PENDING\>\[\t \]+set_tracepoint.*4\.3.* in func4.*\tinstalled on target).*" \
+ "tracepoint with two locations (unload)"
- gdb_test_no_output "tstop"
+ gdb_test_no_output "tstop"
- gdb_test "tfind" "Found trace frame 0, tracepoint 4.*" "tfind frame 0"
- gdb_test "tfind" "Target failed to find requested trace frame\\..*"
-}}
+ gdb_test "tfind" "Found trace frame 0, tracepoint 4.*" \
+ "tfind frame 0"
+ gdb_test "tfind" \
+ "Target failed to find requested trace frame\\..*"
+ }
+}
# Set pending tracepoint.
-proc tracepoint_change_loc_2 { trace_type } { with_test_prefix "2 $trace_type" {
- global srcdir
- global srcfile
- global subdir
- global pcreg
- global binfile
- global gdb_prompt
-
- gdb_exit
- gdb_start
- gdb_reinitialize_dir $srcdir/$subdir
-
- gdb_test_multiple "${trace_type} set_tracepoint" "set pending tracepoint" {
- -re ".*Make \(|fast \)tracepoint pending.*y or \\\[n\\\]. $" {
- gdb_test "y" "\(Fast t|T\)racepoint.*set_tracepoint.*pending." "set pending tracepoint"
+proc tracepoint_change_loc_2 { trace_type } {
+ with_test_prefix "2 $trace_type" {
+ global srcdir
+ global srcfile
+ global subdir
+ global pcreg
+ global binfile
+ global gdb_prompt
+
+ gdb_exit
+ gdb_start
+ gdb_reinitialize_dir $srcdir/$subdir
+
+ gdb_test_multiple "${trace_type} set_tracepoint" "set pending tracepoint" {
+ -re ".*Make \(|fast \)tracepoint pending.*y or \\\[n\\\]. $" {
+ gdb_test "y" "\(Fast t|T\)racepoint.*set_tracepoint.*pending." "set pending tracepoint"
+ }
}
- }
- gdb_trace_setactions "set action for tracepoint" "" \
- "collect \$$pcreg" "^$"
+ gdb_trace_setactions "set action for tracepoint" "" \
+ "collect \$$pcreg" "^$"
- # tracepoint has no location information now.
- gdb_test "info trace" \
- "Num Type\[ \]+Disp Enb Address\[ \]+What.*
-\[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*PENDING.*set_tracepoint.*" \
- "single pending tracepoint info (without symbols)"
+ # tracepoint has no location information now. Make sure nothing
+ # else is displayed.
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*PENDING.*set_tracepoint\r\n\[\t \]+collect \\$$pcreg\r" \
+ "single pending tracepoint info (without symbols)"
- gdb_load ${binfile}
- # tracepoint has one location after executable is loaded.
- gdb_test "info trace" \
- "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+ gdb_load ${binfile}
+ # tracepoint has one location after executable is loaded.
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
\[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*func4.*" \
- "tracepoint with one location"
+ "tracepoint with one location"
- set main_bp 0
- gdb_test_multiple "break main" "set breakpoint on main" {
- -re "Breakpoint (\[0-9\]*) at .*, line.*$gdb_prompt $" {
- set main_bp $expect_out(1,string)
+ set main_bp 0
+ gdb_test_multiple "break main" "set breakpoint on main" {
+ -re "Breakpoint (\[0-9\]*) at .*, line.*$gdb_prompt $" {
+ set main_bp $expect_out(1,string)
+ }
}
- }
- gdb_run_cmd
+ gdb_run_cmd
- gdb_test "" \
- ".*Breakpoint.*main.*at.*$srcfile.*" \
- "run to main"
- gdb_test_no_output "delete break $main_bp"
+ gdb_test "" \
+ ".*Breakpoint.*main.*at.*$srcfile.*" \
+ "run to main"
+ gdb_test_no_output "delete break $main_bp"
- # tracepoint has two locations after shlib change-loc-1 is loaded.
- gdb_test "info trace" \
- "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+ # tracepoint has two locations after shlib change-loc-1 is loaded.
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
\[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\<MULTIPLE\>.*1\.1.* in func4.*1\.2.* in func4.*" \
- "tracepoint with two locations"
-
- gdb_test "break marker" "Breakpoint.*at.* file .*$srcfile, line.*" \
- "breakpoint on marker"
-
- # tracepoint with two locations will be downloaded and installed.
- set test "tstart"
- gdb_test_multiple "tstart" $test {
- -re "^tstart\r\n$gdb_prompt $" {
- pass "tstart"
- }
- -re "Target returns error code .* too far .*$gdb_prompt $" {
- if [string equal $trace_type "ftrace"] {
- # The target was unable to install the fast tracepoint
- # (e.g., jump pad too far from tracepoint).
- pass "$test (too far)"
- # Skip the rest of the tests.
- return
- } else {
- fail $test
- }
+ "tracepoint with two locations"
+
+ gdb_test "break marker" "Breakpoint.*at.* file .*$srcfile, line.*" \
+ "breakpoint on marker"
+
+ # tracepoint with two locations will be downloaded and installed.
+ set test "tstart"
+ gdb_test_multiple "tstart" $test {
+ -re "^tstart\r\n$gdb_prompt $" {
+ pass "tstart"
+ }
+ -re "Target returns error code .* too far .*$gdb_prompt $" {
+ if [string equal $trace_type "ftrace"] {
+ # The target was unable to install the fast tracepoint
+ # (e.g., jump pad too far from tracepoint).
+ pass "$test (too far)"
+ # Skip the rest of the tests.
+ return
+ } else {
+ fail $test
+ }
+ }
}
- }
- gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \
- "continue to marker 1"
+ gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \
+ "continue to marker 1"
- gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \
- "continue to marker 2"
+ gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \
+ "continue to marker 2"
- # tracepoint has three locations after shlib change-loc-2 is loaded.
- gdb_test "info trace" \
- "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+ # tracepoint has three locations after shlib change-loc-2 is loaded.
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
\[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\<MULTIPLE\>.*1\.1.* in func4.*1\.2.* in func4.*1\.3.* in func4 .*" \
- "tracepoint with three locations"
+ "tracepoint with three locations"
+
+ gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \
+ "continue to marker 3"
+
+ # shlib is unloaded, there are still three locations, but one is pending.
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\<MULTIPLE\>.*
+1\.1.* in func4.*\tinstalled on target\r\n(1\.2.* in func4.*\tinstalled on target\r\n1\.3.* \<PENDING\>\[\t \]+set_tracepoint|1\.2.* \<PENDING\>\[\t \]+set_tracepoint\r\n1\.3.* in func4.*\tinstalled on target).*" \
+ "tracepoint with two locations (unload)"
+
+ gdb_test_no_output "tstop"
+
+ gdb_test "tfind" "Found trace frame 0, tracepoint 1.*" "tfind frame 0"
+ gdb_test "tfind" "Found trace frame 1, tracepoint 1.*" "tfind frame 1"
+ gdb_test "tfind" "Found trace frame 2, tracepoint 1.*" "tfind frame 2"
+ gdb_test "tfind" "Target failed to find requested trace frame\\..*"
+ }
+}
+
+# Test that setting a tracepoint while the trace experiment is ongoing
+# doesn't work when we force-disable the InstallInTrace RSP feature.
+
+proc tracepoint_install_in_trace_disabled { trace_type } {
+ with_test_prefix "InstallInTrace disabled: $trace_type" {
+ global testfile
+ global srcfile
+ global pcreg
+ global gdb_prompt
+
+ clean_restart ${testfile}
+ if ![runto_main] {
+ fail "Can't run to main"
+ return -1
+ }
- gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \
- "continue to marker 3"
+ # This test only makes sense with the remote target.
+ if ![gdb_is_target_remote] {
+ return
+ }
+
+ gdb_test_no_output "delete break 1"
+
+ # Set a tracepoint we'll never meet. Just to avoid the
+ # complain after `tstart' later.
+ gdb_test "next" ".*"
+ gdb_test "trace main" \
+ "Tracepoint \[0-9\] at.* file .*$srcfile, line.*" \
+ "set tracepoint on main"
+
+ gdb_test "break marker" "Breakpoint.*at.* file .*$srcfile, line.*" \
+ "breakpoint on marker"
+
+ gdb_test_no_output "tstart"
+
+ # Force-disable the InstallInTrace RSP feature.
+ gdb_test_no_output "set remote install-in-trace-packet off"
- # shlib is unloaded, there are still three locations, but one is pending.
- gdb_test "info trace" \
- "Num Type\[ \]+Disp Enb Address\[ \]+What.*
-\[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\<MULTIPLE\>.*1\.1.* in func4.*1\.2.* in func4.*1\.3.* \<PENDING\>\[\t \]+set_tracepoint.*" \
- "tracepoint with two locations (unload)"
+ # Set a tracepoint while a trace experiment is ongoing.
+ gdb_test "${trace_type} set_tracepoint" \
+ "racepoint .* at .* set_tracepoint.*" \
+ "set tracepoint on set_tracepoint"
- gdb_test_no_output "tstop"
+ gdb_trace_setactions "set action for tracepoint" "" \
+ "collect \$$pcreg" "^$"
- gdb_test "tfind" "Found trace frame 0, tracepoint 1.*" "tfind frame 0"
- gdb_test "tfind" "Found trace frame 1, tracepoint 1.*" "tfind frame 1"
- gdb_test "tfind" "Found trace frame 2, tracepoint 1.*" "tfind frame 2"
- gdb_test "tfind" "Target failed to find requested trace frame\\..*"
-}}
+ # Make sure the tracepoint is _not_ installed on the target.
+ gdb_test "info trace" \
+ "Num Type\[ \]+Disp Enb Address\[ \]+What.*
+\[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*installed on target.*\<MULTIPLE\>.*4\.1.* in func4.*not installed on target.*4\.2.* in func4.*not installed on target.*" \
+ "tracepoint is not installed"
+
+ gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \
+ "continue to marker"
+
+ gdb_test_no_output "tstop"
+
+ # Nothing should have been collected.
+ gdb_test "tfind" "Target failed to find requested trace frame\\..*"
+ }
+}
tracepoint_change_loc_1 "trace"
tracepoint_change_loc_2 "trace"
+tracepoint_install_in_trace_disabled "trace"
# Re-compile test case with IPA.
-set libipa $objdir/../gdbserver/libinproctrace.so
+set libipa [get_in_proc_agent]
gdb_load_shlibs $libipa
if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile executable \
tracepoint_change_loc_1 "ftrace"
tracepoint_change_loc_2 "ftrace"
+tracepoint_install_in_trace_disabled "ftrace"