-# Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2007, 2008, 2009 Free Software Foundation, Inc.
+# Copyright 1992-2005, 2007-2012 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
}
verbose "using GDBFLAGS = $GDBFLAGS" 2
+# Make the build data directory available to tests.
+set BUILD_DATA_DIRECTORY "[pwd]/../data-directory"
+
# INTERNAL_GDBFLAGS contains flags that the testsuite requires.
-set INTERNAL_GDBFLAGS "-nw -nx"
+global INTERNAL_GDBFLAGS
+if ![info exists INTERNAL_GDBFLAGS] {
+ set INTERNAL_GDBFLAGS "-nw -nx -data-directory $BUILD_DATA_DIRECTORY"
+}
# The variable gdb_prompt is a regexp which matches the gdb prompt.
# Set it if it is not already set.
set octal "\[0-7\]+"
+set inferior_exited_re "(\\\[Inferior \[0-9\]+ \\(.*\\) exited)"
+
### Only procedures should come after this point.
#
global GDB
global INTERNAL_GDBFLAGS GDBFLAGS
global gdb_prompt
- set fileid [open "gdb_cmd" w];
- puts $fileid "q";
- close $fileid;
- set cmdfile [remote_download host "gdb_cmd"];
- set output [remote_exec host "$GDB $INTERNAL_GDBFLAGS --command $cmdfile"]
- remote_file build delete "gdb_cmd";
- remote_file host delete "$cmdfile";
+ set output [remote_exec host "$GDB $INTERNAL_GDBFLAGS --version"]
set tmp [lindex $output 1];
set version ""
regexp " \[0-9\]\[^ \t\n\r\]+" "$tmp" version
gdb_expect 60 {
-re "No executable file now\[^\r\n\]*\[\r\n\]" { exp_continue }
-re "No symbol file now\[^\r\n\]*\[\r\n\]" { exp_continue }
- -re "A program is being debugged already..*Kill it.*y or n. $"\
- { send_gdb "y\n"
- verbose "\t\tKilling previous program being debugged"
+ -re "A program is being debugged already.*Are you sure you want to change the file.*y or n. $" {
+ send_gdb "y\n"
exp_continue
}
-re "Discard symbol table from .*y or n.*$" {
}
}
-
-#
# Generic run command.
#
# The second pattern below matches up to the first newline *only*.
# Using ``.*$'' could swallow up output that we attempt to match
# elsewhere.
#
+# N.B. This function does not wait for gdb to return to the prompt,
+# that is the caller's responsibility.
+
proc gdb_run_cmd {args} {
- global gdb_prompt
+ global gdb_prompt use_gdb_stub
if [target_info exists gdb_init_command] {
send_gdb "[target_info gdb_init_command]\n";
}
}
- if [target_info exists use_gdb_stub] {
+ if $use_gdb_stub {
if [target_info exists gdb,do_reload_on_run] {
if { [gdb_reload] != 0 } {
return;
}
}
}
- if [target_info exists gdb_stub] {
- gdb_expect 60 {
- -re "$gdb_prompt $" {
- send_gdb "continue\n"
- }
- }
- }
return
}
exp_continue
}
-notransfer -re "Starting program: \[^\r\n\]*" {}
+ -notransfer -re "$gdb_prompt $" {
+ # There is no more input expected.
+ }
}
}
# Generic start command. Return 0 if we could start the program, -1
# if we could not.
+#
+# N.B. This function does not wait for gdb to return to the prompt,
+# that is the caller's responsibility.
proc gdb_start_cmd {args} {
- global gdb_prompt
+ global gdb_prompt use_gdb_stub
if [target_info exists gdb_init_command] {
send_gdb "[target_info gdb_init_command]\n";
-re "$gdb_prompt $" { }
default {
perror "gdb_init_command for target failed";
- return;
+ return -1;
}
}
}
- if [target_info exists use_gdb_stub] {
+ if $use_gdb_stub {
return -1
}
send_gdb "start $args\n"
+ # Use -notransfer here so that test cases (like chng-sym.exp)
+ # may test for additional start-up messages.
gdb_expect 60 {
-re "The program .* has been started already.*y or n. $" {
send_gdb "y\n"
exp_continue
}
- # Use -notransfer here so that test cases (like chng-sym.exp)
- # may test for additional start-up messages.
-notransfer -re "Starting program: \[^\r\n\]*" {
return 0
}
send_gdb "$pending_response\n"
exp_continue
}
+ -re "A problem internal to GDB has been detected" {
+ fail "setting breakpoint at $function in runto (GDB internal error)"
+ gdb_internal_error_resync
+ return 0
+ }
-re "$gdb_prompt $" {
if { $no_message == 0 } {
fail "setting breakpoint at $function"
-re "Breakpoint \[0-9\]*, \[0-9xa-f\]* in .*$gdb_prompt $" {
return 1
}
+ -re "The target does not support running in non-stop mode.\r\n$gdb_prompt $" {
+ unsupported "Non-stop mode not supported"
+ return 0
+ }
+ -re ".*A problem internal to GDB has been detected" {
+ fail "running to $function in runto (GDB internal error)"
+ gdb_internal_error_resync
+ return 0
+ }
-re "$gdb_prompt $" {
fail "running to $function in runto"
return 0
return 1
}
+# Ask gdb to run until we hit a breakpoint at main.
#
-# runto_main -- ask gdb to run until we hit a breakpoint at main.
-# The case where the target uses stubs has to be handled
-# specially--if it uses stubs, assuming we hit
-# breakpoint() and just step out of the function.
-#
-proc runto_main { } {
- global gdb_prompt
- global decimal
-
- if ![target_info exists gdb_stub] {
- return [runto main]
- }
-
- delete_breakpoints
+# N.B. This function deletes all existing breakpoints.
+# If you don't want that, use gdb_start_cmd.
- gdb_step_for_stub;
-
- return 1
+proc runto_main { } {
+ return [runto main]
}
-
### Continue, and expect to hit a breakpoint.
### Report a pass or fail, depending on whether it seems to have
### worked. Use NAME as part of the test name; each call to
send_gdb "continue\n"
gdb_expect {
- -re "Breakpoint .* (at|in) $location_pattern\r\n$gdb_prompt $" {
+ -re "(?:Breakpoint|Temporary breakpoint) .* (at|in) $location_pattern\r\n$gdb_prompt $" {
pass $full_name
}
-re ".*$gdb_prompt $" {
# }
# }
#
-# The standard patterns, such as "Program exited..." and "A problem
+# The standard patterns, such as "Inferior exited..." and "A problem
# ...", all being implicitly appended to that list.
#
proc gdb_test_multiple { command message user_code } {
- global verbose
+ global verbose use_gdb_stub
global gdb_prompt
global GDB
+ global inferior_exited_re
upvar timeout timeout
upvar expect_out expect_out
set message $command
}
+ if [string match "*\[\r\n\]" $command] {
+ error "Invalid trailing newline in \"$message\" test"
+ }
+
+ if [string match "*\[\r\n\]*" $message] {
+ error "Invalid newline in \"$message\" test"
+ }
+
+ if {$use_gdb_stub
+ && [regexp -nocase {^\s*(r|run|star|start|at|att|atta|attac|attach)\M} \
+ $command]} {
+ error "gdbserver does not support $command without extended-remote"
+ }
+
# TCL/EXPECT WART ALERT
# Expect does something very strange when it receives a single braced
# argument. It splits it along word separators and performs substitutions.
set processed_code ""
set patterns ""
set expecting_action 0
+ set expecting_arg 0
foreach item $user_code subst_item $subst_code {
if { $item == "-n" || $item == "-notransfer" || $item == "-nocase" } {
lappend processed_code $item
continue
}
- if {$item == "-indices" || $item == "-re" || $item == "-ex"} {
+ if { $item == "-indices" || $item == "-re" || $item == "-ex" } {
+ lappend processed_code $item
+ continue
+ }
+ if { $item == "-timeout" } {
+ set expecting_arg 1
+ lappend processed_code $item
+ continue
+ }
+ if { $expecting_arg } {
+ set expecting_arg 0
lappend processed_code $item
continue
}
set result -1
set string "${command}\n";
if { $command != "" } {
+ set multi_line_re "\[\r\n\] *>"
while { "$string" != "" } {
set foo [string first "\n" "$string"];
set len [string length "$string"];
# command output is not lost for pattern matching
# - guo
gdb_expect 2 {
- -notransfer -re "\[\r\n\]" { verbose "partial: match" 3 }
+ -notransfer -re "$multi_line_re$" { verbose "partial: match" 3 }
timeout { verbose "partial: timeout" 3 }
}
set string [string range "$string" [expr $foo + 1] end];
+ set multi_line_re "$multi_line_re.*\[\r\n\] *>"
} else {
break;
}
}
set code {
- -re ".*A problem internal to GDB has been detected" {
- fail "$message (GDB internal error)"
- gdb_internal_error_resync
- }
- -re "\\*\\*\\* DOSEXIT code.*" {
- if { $message != "" } {
- fail "$message";
- }
- gdb_suppress_entire_file "GDB died";
- set result -1;
- }
+ -re ".*A problem internal to GDB has been detected" {
+ fail "$message (GDB internal error)"
+ gdb_internal_error_resync
+ }
+ -re "\\*\\*\\* DOSEXIT code.*" {
+ if { $message != "" } {
+ fail "$message";
+ }
+ gdb_suppress_entire_file "GDB died";
+ set result -1;
+ }
}
append code $processed_code
append code {
- -re "Ending remote debugging.*$gdb_prompt $" {
+ -re "Ending remote debugging.*$gdb_prompt $" {
if ![isnative] then {
warning "Can`t communicate to remote target."
}
gdb_start
set result -1
}
- -re "Undefined\[a-z\]* command:.*$gdb_prompt $" {
+ -re "Undefined\[a-z\]* command:.*$gdb_prompt $" {
perror "Undefined command \"$command\"."
- fail "$message"
+ fail "$message"
set result 1
}
- -re "Ambiguous command.*$gdb_prompt $" {
+ -re "Ambiguous command.*$gdb_prompt $" {
perror "\"$command\" is not a unique command name."
- fail "$message"
+ fail "$message"
set result 1
}
- -re "Program exited with code \[0-9\]+.*$gdb_prompt $" {
+ -re "$inferior_exited_re with code \[0-9\]+.*$gdb_prompt $" {
if ![string match "" $message] then {
set errmsg "$message (the program exited)"
} else {
fail "$errmsg"
set result -1
}
- -re "EXIT code \[0-9\r\n\]+Program exited normally.*$gdb_prompt $" {
+ -re "$inferior_exited_re normally.*$gdb_prompt $" {
if ![string match "" $message] then {
set errmsg "$message (the program exited)"
} else {
fail "$errmsg"
set result -1
}
- -re "The program is not being run.*$gdb_prompt $" {
+ -re "The program is not being run.*$gdb_prompt $" {
if ![string match "" $message] then {
set errmsg "$message (the program is no longer running)"
} else {
fail "$errmsg"
set result -1
}
- -re "\r\n$gdb_prompt $" {
+ -re "\r\n$gdb_prompt $" {
if ![string match "" $message] then {
fail "$message"
}
set result 1
}
- "<return>" {
+ "<return>" {
send_gdb "\n"
perror "Window too small."
- fail "$message"
+ fail "$message"
set result -1
}
- -re "\\(y or n\\) " {
+ -re "\\((y or n|y or \\\[n\\\]|\\\[y\\\] or n)\\) " {
send_gdb "n\n"
- perror "Got interactive prompt."
- fail "$message"
+ gdb_expect -re "$gdb_prompt $"
+ fail "$message (got interactive prompt)"
set result -1
}
- eof {
- perror "Process no longer exists"
- if { $message != "" } {
- fail "$message"
- }
- return -1
+ -re "\\\[0\\\] cancel\r\n\\\[1\\\] all.*\r\n> $" {
+ send_gdb "0\n"
+ gdb_expect -re "$gdb_prompt $"
+ fail "$message (got breakpoint menu)"
+ set result -1
+ }
+ eof {
+ perror "Process no longer exists"
+ if { $message != "" } {
+ fail "$message"
+ }
+ return -1
}
- full_buffer {
+ full_buffer {
perror "internal buffer is full."
- fail "$message"
+ fail "$message"
set result -1
}
timeout {
if {$code == 1} {
global errorInfo errorCode;
return -code error -errorinfo $errorInfo -errorcode $errorCode $string
- } elseif {$code == 2} {
- return -code return $string
- } elseif {$code == 3} {
- return
- } elseif {$code > 4} {
+ } elseif {$code > 1} {
return -code $code $string
}
return $result
}
}]
}
+
+# gdb_test_no_output COMMAND MESSAGE
+# Send a command to GDB and verify that this command generated no output.
+#
+# See gdb_test_multiple for a description of the COMMAND and MESSAGE
+# parameters. If MESSAGE is ommitted, then COMMAND will be used as
+# the message. (If MESSAGE is the empty string, then sometimes we do not
+# call pass or fail at all; I don't understand this at all.)
+
+proc gdb_test_no_output { args } {
+ global gdb_prompt
+ set command [lindex $args 0]
+ if [llength $args]>1 then {
+ set message [lindex $args 1]
+ } else {
+ set message $command
+ }
+
+ set command_regex [string_to_regexp $command]
+ gdb_test_multiple $command $message {
+ -re "^$command_regex\r\n$gdb_prompt $" {
+ if ![string match "" $message] then {
+ pass "$message"
+ }
+ }
+ }
+}
+
+# Send a command and then wait for a sequence of outputs.
+# This is useful when the sequence is long and contains ".*", a single
+# regexp to match the entire output can get a timeout much easier.
+#
+# COMMAND is the command to send.
+# TEST_NAME is passed to pass/fail. COMMAND is used if TEST_NAME is "".
+# EXPECTED_OUTPUT_LIST is a list of regexps of expected output, which are
+# processed in order, and all must be present in the output.
+#
+# It is unnecessary to specify ".*" at the beginning or end of any regexp,
+# there is an implicit ".*" between each element of EXPECTED_OUTPUT_LIST.
+# There is also an implicit ".*" between the last regexp and the gdb prompt.
+#
+# Like gdb_test and gdb_test_multiple, the output is expected to end with the
+# gdb prompt, which must not be specified in EXPECTED_OUTPUT_LIST.
+#
+# Returns:
+# 1 if the test failed,
+# 0 if the test passes,
+# -1 if there was an internal error.
+
+proc gdb_test_sequence { command test_name expected_output_list } {
+ global gdb_prompt
+ if { $test_name == "" } {
+ set test_name $command
+ }
+ lappend expected_output_list ""; # implicit ".*" before gdb prompt
+ send_gdb "$command\n"
+ return [gdb_expect_list $test_name "$gdb_prompt $" $expected_output_list]
+}
+
\f
# Test that a command gives an error. For pass or fail, return
# a 1 to indicate that more tests can proceed. However a timeout
return [gdb_test $command $pattern $message]
}
+
+# Wrapper around gdb_test_multiple that looks for a list of expected
+# output elements, but which can appear in any order.
+# CMD is the gdb command.
+# NAME is the name of the test.
+# ELM_FIND_REGEXP specifies how to partition the output into elements to
+# compare.
+# ELM_EXTRACT_REGEXP specifies the part of ELM_FIND_REGEXP to compare.
+# RESULT_MATCH_LIST is a list of exact matches for each expected element.
+# All elements of RESULT_MATCH_LIST must appear for the test to pass.
+#
+# A typical use of ELM_FIND_REGEXP/ELM_EXTRACT_REGEXP is to extract one line
+# of text per element and then strip trailing \r\n's.
+# Example:
+# gdb_test_list_exact "foo" "bar" \
+# "\[^\r\n\]+\[\r\n\]+" \
+# "\[^\r\n\]+" \
+# { \
+# {expected result 1} \
+# {expected result 2} \
+# }
+
+proc gdb_test_list_exact { cmd name elm_find_regexp elm_extract_regexp result_match_list } {
+ global gdb_prompt
+
+ set matches [lsort $result_match_list]
+ set seen {}
+ gdb_test_multiple $cmd $name {
+ "$cmd\[\r\n\]" { exp_continue }
+ -re $elm_find_regexp {
+ set str $expect_out(0,string)
+ verbose -log "seen: $str" 3
+ regexp -- $elm_extract_regexp $str elm_seen
+ verbose -log "extracted: $elm_seen" 3
+ lappend seen $elm_seen
+ exp_continue
+ }
+ -re "$gdb_prompt $" {
+ set failed ""
+ foreach got [lsort $seen] have $matches {
+ if {![string equal $got $have]} {
+ set failed $have
+ break
+ }
+ }
+ if {[string length $failed] != 0} {
+ fail "$name ($failed not found)"
+ } else {
+ pass $name
+ }
+ }
+ }
+}
\f
proc gdb_reinitialize_dir { subdir } {
global gdb_prompt
# get really slow. Give gdb at least 3 minutes to start up.
#
proc default_gdb_start { } {
- global verbose
+ global verbose use_gdb_stub
global GDB
global INTERNAL_GDBFLAGS GDBFLAGS
global gdb_prompt
global timeout
global gdb_spawn_id;
- global env
gdb_stop_suppressing_tests;
- set env(LC_CTYPE) C
+ # Set the default value, it may be overriden later by specific testfile.
+ #
+ # Use `set_board_info use_gdb_stub' for the board file to flag the inferior
+ # is already started after connecting and run/attach are not supported.
+ # This is used for the "remote" protocol. After GDB starts you should
+ # check global $use_gdb_stub instead of the board as the testfile may force
+ # a specific different target protocol itself.
+ set use_gdb_stub [target_info exists use_gdb_stub]
verbose "Spawning $GDB $INTERNAL_GDBFLAGS $GDBFLAGS"
return 0;
}
+# Examine the output of compilation to determine whether compilation
+# failed or not. If it failed determine whether it is due to missing
+# compiler or due to compiler error. Report pass, fail or unsupported
+# as appropriate
+
+proc gdb_compile_test {src output} {
+ if { $output == "" } {
+ pass "compilation [file tail $src]"
+ } elseif { [regexp {^[a-zA-Z_0-9]+: Can't find [^ ]+\.$} $output] } {
+ unsupported "compilation [file tail $src]"
+ } elseif { [regexp {.*: command not found[\r|\n]*$} $output] } {
+ unsupported "compilation [file tail $src]"
+ } elseif { [regexp {.*: [^\r\n]*compiler not installed[^\r\n]*[\r|\n]*$} $output] } {
+ unsupported "compilation [file tail $src]"
+ } else {
+ verbose -log "compilation failed: $output" 2
+ fail "compilation [file tail $src]"
+ }
+}
+
# Return a 1 for configurations for which we don't even want to try to
# test C++.
return 0
}
+# Return a 1 for configurations for which don't have both C++ and the STL.
+
+proc skip_stl_tests {} {
+ # Symbian supports the C++ language, but the STL is missing
+ # (both headers and libraries).
+ if { [istarget "arm*-*-symbianelf*"] } {
+ return 1
+ }
+
+ return [skip_cplus_tests]
+}
+
# Return a 1 if I don't even want to try to test FORTRAN.
proc skip_fortran_tests {} {
return 0
}
+# Return a 1 if I don't even want to try to test ada.
+
+proc skip_ada_tests {} {
+ return 0
+}
+
+# Return a 1 if I don't even want to try to test GO.
+
+proc skip_go_tests {} {
+ return 0
+}
+
+# Return a 1 if I don't even want to try to test java.
+
+proc skip_java_tests {} {
+ return 0
+}
+
+# Return a 1 for configurations that do not support Python scripting.
+
+proc skip_python_tests {} {
+ global gdb_prompt
+ gdb_test_multiple "python print 'test'" "verify python support" {
+ -re "not supported.*$gdb_prompt $" {
+ unsupported "Python support is disabled."
+ return 1
+ }
+ -re "$gdb_prompt $" {}
+ }
+
+ return 0
+}
+
# Return a 1 if we should skip shared library tests.
proc skip_shlib_tests {} {
return 1
}
+# Test files shall make sure all the test result lines in gdb.sum are
+# unique in a test run, so that comparing the gdb.sum files of two
+# test runs gives correct results. Test files that exercise
+# variations of the same tests more than once, shall prefix the
+# different test invocations with different identifying strings in
+# order to make them unique.
+#
+# About test prefixes:
+#
+# $pf_prefix is the string that dejagnu prints after the result (FAIL,
+# PASS, etc.), and before the test message/name in gdb.sum. E.g., the
+# underlined substring in
+#
+# PASS: gdb.base/mytest.exp: some test
+# ^^^^^^^^^^^^^^^^^^^^
+#
+# is $pf_prefix.
+#
+# The easiest way to adjust the test prefix is to append a test
+# variation prefix to the $pf_prefix, using the with_test_prefix
+# procedure. E.g.,
+#
+# proc do_tests {} {
+# gdb_test ... ... "test foo"
+# gdb_test ... ... "test bar"
+#
+# with_test_prefix "subvariation a" {
+# gdb_test ... ... "test x"
+# }
+#
+# with_test_prefix "subvariation b" {
+# gdb_test ... ... "test x"
+# }
+# }
+#
+# with_test_prefix "variation1" {
+# ...do setup for variation 1...
+# do_tests
+# }
+#
+# with_test_prefix "variation2" {
+# ...do setup for variation 2...
+# do_tests
+# }
+#
+# Results in:
+#
+# PASS: gdb.base/mytest.exp: variation1: test foo
+# PASS: gdb.base/mytest.exp: variation1: test bar
+# PASS: gdb.base/mytest.exp: variation1: subvariation a: test x
+# PASS: gdb.base/mytest.exp: variation1: subvariation b: test x
+# PASS: gdb.base/mytest.exp: variation2: test foo
+# PASS: gdb.base/mytest.exp: variation2: test bar
+# PASS: gdb.base/mytest.exp: variation2: subvariation a: test x
+# PASS: gdb.base/mytest.exp: variation2: subvariation b: test x
+#
+# If for some reason more flexibility is necessary, one can also
+# manipulate the pf_prefix global directly, treating it as a string.
+# E.g.,
+#
+# global pf_prefix
+# set saved_pf_prefix
+# append pf_prefix "${foo}: bar"
+# ... actual tests ...
+# set pf_prefix $saved_pf_prefix
+#
+
+# Run BODY in the context of the caller, with the current test prefix
+# (pf_prefix) appended with one space, then PREFIX, and then a colon.
+# Returns the result of BODY.
+#
+proc with_test_prefix { prefix body } {
+ global pf_prefix
+
+ set saved $pf_prefix
+ append pf_prefix " " $prefix ":"
+ set code [catch {uplevel 1 $body} result]
+ set pf_prefix $saved
+
+ if {$code == 1} {
+ global errorInfo errorCode
+ return -code $code -errorinfo $errorInfo -errorcode $errorCode $result
+ } else {
+ return -code $code $result
+ }
+}
+
+# Return 1 if _Complex types are supported, otherwise, return 0.
+
+proc support_complex_tests {} {
+ global support_complex_tests_saved
+
+ # Use the cached value, if it exists.
+ if [info exists support_complex_tests_saved] {
+ verbose "returning saved $support_complex_tests_saved" 2
+ return $support_complex_tests_saved
+ }
+
+ # Set up, compile, and execute a test program containing _Complex types.
+ # Include the current process ID in the file names to prevent conflicts
+ # with invocations for multiple testsuites.
+ set src complex[pid].c
+ set exe complex[pid].x
+
+ set f [open $src "w"]
+ puts $f "int main() {"
+ puts $f "_Complex float cf;"
+ puts $f "_Complex double cd;"
+ puts $f "_Complex long double cld;"
+ puts $f " return 0; }"
+ close $f
+
+ verbose "compiling testfile $src" 2
+ set compile_flags {debug nowarnings quiet}
+ set lines [gdb_compile $src $exe executable $compile_flags]
+ file delete $src
+ file delete $exe
+
+ if ![string match "" $lines] then {
+ verbose "testfile compilation failed, returning 0" 2
+ set support_complex_tests_saved 0
+ } else {
+ set support_complex_tests_saved 1
+ }
+
+ return $support_complex_tests_saved
+}
+
+# Return 1 if target hardware or OS supports single stepping to signal
+# handler, otherwise, return 0.
+
+proc can_single_step_to_signal_handler {} {
+
+ # Targets don't have hardware single step. On these targets, when
+ # a signal is delivered during software single step, gdb is unable
+ # to determine the next instruction addresses, because start of signal
+ # handler is one of them.
+ if { [istarget "arm*-*-*"] || [istarget "mips*-*-*"]
+ || [istarget "tic6x-*-*"] || [istarget "sparc*-*-linux*"] } {
+ return 0
+ }
+
+ return 1
+}
+
+# Return 1 if target supports process record, otherwise return 0.
+
+proc supports_process_record {} {
+
+ if [target_info exists gdb,use_precord] {
+ return [target_info gdb,use_precord]
+ }
+
+ if { [istarget "x86_64-*-linux*"] || [istarget "i\[34567\]86-*-linux*"] } {
+ return 1
+ }
+
+ return 0
+}
+
+# Return 1 if target supports reverse debugging, otherwise return 0.
+
+proc supports_reverse {} {
+
+ if [target_info exists gdb,can_reverse] {
+ return [target_info gdb,can_reverse]
+ }
+
+ if { [istarget "x86_64-*-linux*"] || [istarget "i\[34567\]86-*-linux*"] } {
+ return 1
+ }
+
+ return 0
+}
+
+# Return 1 if target is ILP32.
+# This cannot be decided simply from looking at the target string,
+# as it might depend on externally passed compiler options like -m64.
+proc is_ilp32_target {} {
+ global is_ilp32_target_saved
+
+ # Use the cached value, if it exists. Cache value per "board" to handle
+ # runs with multiple options (e.g. unix/{-m32,-64}) correctly.
+ set me "is_ilp32_target"
+ set board [target_info name]
+ if [info exists is_ilp32_target_saved($board)] {
+ verbose "$me: returning saved $is_ilp32_target_saved($board)" 2
+ return $is_ilp32_target_saved($board)
+ }
+
+
+ set src ilp32[pid].c
+ set obj ilp32[pid].o
+
+ set f [open $src "w"]
+ puts $f "int dummy\[sizeof (int) == 4"
+ puts $f " && sizeof (void *) == 4"
+ puts $f " && sizeof (long) == 4 ? 1 : -1\];"
+ close $f
+
+ verbose "$me: compiling testfile $src" 2
+ set lines [gdb_compile $src $obj object {quiet}]
+ file delete $src
+ file delete $obj
+
+ if ![string match "" $lines] then {
+ verbose "$me: testfile compilation failed, returning 0" 2
+ return [set is_ilp32_target_saved($board) 0]
+ }
+
+ verbose "$me: returning 1" 2
+ return [set is_ilp32_target_saved($board) 1]
+}
+
+# Return 1 if target is LP64.
+# This cannot be decided simply from looking at the target string,
+# as it might depend on externally passed compiler options like -m64.
+proc is_lp64_target {} {
+ global is_lp64_target_saved
+
+ # Use the cached value, if it exists. Cache value per "board" to handle
+ # runs with multiple options (e.g. unix/{-m32,-64}) correctly.
+ set me "is_lp64_target"
+ set board [target_info name]
+ if [info exists is_lp64_target_saved($board)] {
+ verbose "$me: returning saved $is_lp64_target_saved($board)" 2
+ return $is_lp64_target_saved($board)
+ }
+
+ set src lp64[pid].c
+ set obj lp64[pid].o
+
+ set f [open $src "w"]
+ puts $f "int dummy\[sizeof (int) == 4"
+ puts $f " && sizeof (void *) == 8"
+ puts $f " && sizeof (long) == 8 ? 1 : -1\];"
+ close $f
+
+ verbose "$me: compiling testfile $src" 2
+ set lines [gdb_compile $src $obj object {quiet}]
+ file delete $src
+ file delete $obj
+
+ if ![string match "" $lines] then {
+ verbose "$me: testfile compilation failed, returning 0" 2
+ return [set is_lp64_target_saved($board) 0]
+ }
+
+ verbose "$me: returning 1" 2
+ return [set is_lp64_target_saved($board) 1]
+}
+
+# Return 1 if target has x86_64 registers - either amd64 or x32.
+# x32 target identifies as x86_64-*-linux*, therefore it cannot be determined
+# just from the target string.
+proc is_amd64_regs_target {} {
+ global is_amd64_regs_target_saved
+
+ if {![istarget "x86_64-*-*"] && ![istarget "i?86-*"]} {
+ return 0
+ }
+
+ # Use the cached value, if it exists. Cache value per "board" to handle
+ # runs with multiple options (e.g. unix/{-m32,-64}) correctly.
+ set me "is_amd64_regs_target"
+ set board [target_info name]
+ if [info exists is_amd64_regs_target_saved($board)] {
+ verbose "$me: returning saved $is_amd64_regs_target_saved($board)" 2
+ return $is_amd64_regs_target_saved($board)
+ }
+
+ set src reg64[pid].s
+ set obj reg64[pid].o
+
+ set f [open $src "w"]
+ foreach reg \
+ {rax rbx rcx rdx rsi rdi rbp rsp r8 r9 r10 r11 r12 r13 r14 r15} {
+ puts $f "\tincq %$reg"
+ }
+ close $f
+
+ verbose "$me: compiling testfile $src" 2
+ set lines [gdb_compile $src $obj object {quiet}]
+ file delete $src
+ file delete $obj
+
+ if ![string match "" $lines] then {
+ verbose "$me: testfile compilation failed, returning 0" 2
+ return [set is_amd64_regs_target_saved($board) 0]
+ }
+
+ verbose "$me: returning 1" 2
+ return [set is_amd64_regs_target_saved($board) 1]
+}
+
+# Return 1 if this target is an x86 or x86-64 with -m32.
+proc is_x86_like_target {} {
+ if {![istarget "x86_64-*-*"] && ![istarget i?86-*]} {
+ return 0
+ }
+ return [expr [is_ilp32_target] && ![is_amd64_regs_target]]
+}
+
+# Return 1 if displaced stepping is supported on target, otherwise, return 0.
+proc support_displaced_stepping {} {
+
+ if { [istarget "x86_64-*-linux*"] || [istarget "i\[34567\]86-*-linux*"]
+ || [istarget "arm*-*-linux*"] || [istarget "powerpc-*-linux*"]
+ || [istarget "powerpc64-*-linux*"] || [istarget "s390*-*-*"] } {
+ return 1
+ }
+
+ return 0
+}
+
# Run a test on the target to see if it supports vmx hardware. Return 0 if so,
# 1 if it does not. Based on 'check_vmx_hw_available' from the GCC testsuite.
proc skip_altivec_tests {} {
global skip_vmx_tests_saved
- global srcdir subdir gdb_prompt
+ global srcdir subdir gdb_prompt inferior_exited_re
# Use the cached value, if it exists.
set me "skip_altivec_tests"
# Make sure we have a compiler that understands altivec.
set compile_flags {debug nowarnings}
- if [get_compiler_info not-used] {
+ if [get_compiler_info] {
warning "Could not get compiler info"
return 1
}
verbose -log "\n$me altivec hardware not detected"
set skip_vmx_tests_saved 1
}
- -re ".*Program exited normally.*${gdb_prompt} $" {
+ -re ".*$inferior_exited_re normally.*${gdb_prompt} $" {
verbose -log "\n$me: altivec hardware detected"
set skip_vmx_tests_saved 0
}
proc skip_vsx_tests {} {
global skip_vsx_tests_saved
- global srcdir subdir gdb_prompt
+ global srcdir subdir gdb_prompt inferior_exited_re
# Use the cached value, if it exists.
set me "skip_vsx_tests"
# Make sure we have a compiler that understands altivec.
set compile_flags {debug nowarnings quiet}
- if [get_compiler_info not-used] {
+ if [get_compiler_info] {
warning "Could not get compiler info"
return 1
}
if [test_compiler_info gcc*] {
set compile_flags "$compile_flags additional_flags=-mvsx"
} elseif [test_compiler_info xlc*] {
- set compile_flags "$compile_flags additional_flags=-qvsx"
+ set compile_flags "$compile_flags additional_flags=-qasm=gcc"
} else {
verbose "Could not compile with vsx support, returning 1" 2
return 1
set f [open $src "w"]
puts $f "int main() {"
+ puts $f " double a\[2\] = { 1.0, 2.0 };"
puts $f "#ifdef __MACH__"
- puts $f " asm volatile (\"lxvd2x v0,v0,v0\");"
+ puts $f " asm volatile (\"lxvd2x v0,v0,%\[addr\]\" : : \[addr\] \"r\" (a));"
puts $f "#else"
- puts $f " asm volatile (\"lxvd2x 0,0,0\");"
+ puts $f " asm volatile (\"lxvd2x 0,0,%\[addr\]\" : : \[addr\] \"r\" (a));"
puts $f "#endif"
puts $f " return 0; }"
close $f
verbose -log "\n$me VSX hardware not detected"
set skip_vsx_tests_saved 1
}
- -re ".*Program exited normally.*${gdb_prompt} $" {
+ -re ".*$inferior_exited_re normally.*${gdb_prompt} $" {
verbose -log "\n$me: VSX hardware detected"
set skip_vsx_tests_saved 0
}
return 1
}
- # GCC before 4.1 does not emit DW_AT_call_file / DW_AT_call_line.
- if { ([test_compiler_info "gcc-2-*"]
- || [test_compiler_info "gcc-3-*"]
- || [test_compiler_info "gcc-4-0-*"]) } {
+ # GCC before 4.1 does not emit DW_AT_call_file / DW_AT_call_line.
+ if { ([test_compiler_info "gcc-2-*"]
+ || [test_compiler_info "gcc-3-*"]
+ || [test_compiler_info "gcc-4-0-*"]) } {
+ return 1
+ }
+
+ return 0
+}
+
+# Return whether we should skip tests for showing variables from
+# inlined functions. Requires get_compiler_info and get_debug_format.
+
+proc skip_inline_var_tests {} {
+ # GDB only recognizes inlining information in DWARF 2 (DWARF 3).
+ if { ! [test_debug_format "DWARF 2"] } {
+ return 1
+ }
+
+ return 0
+}
+
+# Return a 1 if we should skip tests that require hardware breakpoints
+
+proc skip_hw_breakpoint_tests {} {
+ # Skip tests if requested by the board (note that no_hardware_watchpoints
+ # disables both watchpoints and breakpoints)
+ if { [target_info exists gdb,no_hardware_watchpoints]} {
+ return 1
+ }
+
+ # These targets support hardware breakpoints natively
+ if { [istarget "i?86-*-*"]
+ || [istarget "x86_64-*-*"]
+ || [istarget "ia64-*-*"]
+ || [istarget "arm*-*-*"]} {
+ return 0
+ }
+
+ return 1
+}
+
+# Return a 1 if we should skip tests that require hardware watchpoints
+
+proc skip_hw_watchpoint_tests {} {
+ # Skip tests if requested by the board
+ if { [target_info exists gdb,no_hardware_watchpoints]} {
+ return 1
+ }
+
+ # These targets support hardware watchpoints natively
+ if { [istarget "i?86-*-*"]
+ || [istarget "x86_64-*-*"]
+ || [istarget "ia64-*-*"]
+ || [istarget "arm*-*-*"]
+ || [istarget "powerpc*-*-linux*"]
+ || [istarget "s390*-*-*"] } {
+ return 0
+ }
+
+ return 1
+}
+
+# Return a 1 if we should skip tests that require *multiple* hardware
+# watchpoints to be active at the same time
+
+proc skip_hw_watchpoint_multi_tests {} {
+ if { [skip_hw_watchpoint_tests] } {
+ return 1
+ }
+
+ # These targets support just a single hardware watchpoint
+ if { [istarget "arm*-*-*"]
+ || [istarget "powerpc*-*-linux*"] } {
return 1
}
return 0
}
-# Return whether we should skip tests for showing variables from
-# inlined functions. Requires get_compiler_info and get_debug_format.
+# Return a 1 if we should skip tests that require read/access watchpoints
-proc skip_inline_var_tests {} {
- # GDB only recognizes inlining information in DWARF 2 (DWARF 3).
- if { ! [test_debug_format "DWARF 2"] } {
+proc skip_hw_watchpoint_access_tests {} {
+ if { [skip_hw_watchpoint_tests] } {
+ return 1
+ }
+
+ # These targets support just write watchpoints
+ if { [istarget "s390*-*-*"] } {
return 1
}
return 0
}
+# Return 1 if we should skip tests that require the runtime unwinder
+# hook. This must be invoked while gdb is running, after shared
+# libraries have been loaded. This is needed because otherwise a
+# shared libgcc won't be visible.
+
+proc skip_unwinder_tests {} {
+ global gdb_prompt
+
+ set ok 0
+ gdb_test_multiple "print _Unwind_DebugHook" "check for unwinder hook" {
+ -re "= .*no debug info.*_Unwind_DebugHook.*\r\n$gdb_prompt $" {
+ }
+ -re "= .*_Unwind_DebugHook.*\r\n$gdb_prompt $" {
+ set ok 1
+ }
+ -re "No symbol .* in current context.\r\n$gdb_prompt $" {
+ }
+ }
+ if {!$ok} {
+ gdb_test_multiple "info probe" "check for stap probe in unwinder" {
+ -re ".*libgcc.*unwind.*\r\n$gdb_prompt $" {
+ set ok 1
+ }
+ -re "\r\n$gdb_prompt $" {
+ }
+ }
+ }
+ return $ok
+}
+
set compiler_info "unknown"
set gcc_compiled 0
set hp_cc_compiler 0
# Figure out what compiler I am using.
#
-# BINFILE is a "compiler information" output file. This implementation
-# does not use BINFILE.
-#
-# ARGS can be empty or "C++". If empty, "C" is assumed.
+# ARG can be empty or "C++". If empty, "C" is assumed.
#
# There are several ways to do this, with various problems.
#
#
# -- chastain 2004-01-06
-proc get_compiler_info {binfile args} {
+proc get_compiler_info {{arg ""}} {
# For compiler.c and compiler.cc
global srcdir
# Choose which file to preprocess.
set ifile "${srcdir}/lib/compiler.c"
- if { [llength $args] > 0 && [lindex $args 0] == "c++" } {
+ if { $arg == "c++" } {
set ifile "${srcdir}/lib/compiler.cc"
}
# We have to use -E and -o together, despite the comments
# above, because of how DejaGnu handles remote host testing.
set ppout "$outdir/compiler.i"
- gdb_compile "${ifile}" "$ppout" preprocess [list "$args" quiet]
+ gdb_compile "${ifile}" "$ppout" preprocess [list "$arg" quiet]
set file [open $ppout r]
set cppout [read $file]
close $file
} else {
- set cppout [ gdb_compile "${ifile}" "" preprocess [list "$args" quiet] ]
+ set cppout [ gdb_compile "${ifile}" "" preprocess [list "$arg" quiet] ]
}
log_file -a "$outdir/$tool.log"
return [string match $compiler $compiler_info]
}
+proc current_target_name { } {
+ global target_info
+ if [info exists target_info(target,name)] {
+ set answer $target_info(target,name)
+ } else {
+ set answer ""
+ }
+ return $answer
+}
+
set gdb_wrapper_initialized 0
+set gdb_wrapper_target ""
proc gdb_wrapper_init { args } {
global gdb_wrapper_initialized;
global gdb_wrapper_file;
global gdb_wrapper_flags;
+ global gdb_wrapper_target
if { $gdb_wrapper_initialized == 1 } { return; }
}
}
set gdb_wrapper_initialized 1
+ set gdb_wrapper_target [current_target_name]
}
# Some targets need to always link a special object in. Save its path here.
# "shlib=librarypath" in OPTIONS.
set new_options ""
set shlib_found 0
+ set shlib_load 0
foreach opt $options {
if [regexp {^shlib=(.*)} $opt dummy_var shlib_name] {
if [test_compiler_info "xlc-*"] {
} else {
lappend source $shlib_name
}
- if {$shlib_found == 0} {
+ if { $shlib_found == 0 } {
set shlib_found 1
- if { ([test_compiler_info "gcc-*"]
- && ([istarget "powerpc*-*-aix*"]
- || [istarget "rs6000*-*-aix*"] )) } {
- lappend options "additional_flags=-L${outdir}"
- } elseif { [istarget "mips-sgi-irix*"] } {
- lappend options "additional_flags=-rpath ${outdir}"
- }
+ if { ([istarget "*-*-mingw*"]
+ || [istarget *-*-cygwin*]) } {
+ lappend new_options "additional_flags=-Wl,--enable-auto-import"
+ }
}
} elseif { $opt == "shlib_load" } {
- if { ([istarget "*-*-mingw*"]
- || [istarget *-*-cygwin*]
- || [istarget *-*-pe*]
- || [istarget arm*-*-symbianelf*]
- || [istarget hppa*-*-hpux*])} {
- # Do not need anything.
- } elseif { [istarget *-*-openbsd*] } {
- lappend new_options "additional_flags=-Wl,-rpath,${outdir}"
- } else {
- lappend new_options "libs=-ldl"
- lappend new_options "additional_flags=-Wl,-rpath,\\\$ORIGIN"
- }
+ set shlib_load 1
} else {
lappend new_options $opt
}
}
- set options $new_options
- if [target_info exists gdb_stub] {
- set options2 { "additional_flags=-Dusestubs" }
- lappend options "libs=[target_info gdb_stub]";
- set options [concat $options2 $options]
+ # We typically link to shared libraries using an absolute path, and
+ # that's how they are found at runtime. If we are going to
+ # dynamically load one by basename, we must specify rpath. If we
+ # are using a remote host, DejaGNU will link to the shared library
+ # using a relative path, so again we must specify an rpath.
+ if { $shlib_load || ($shlib_found && [is_remote target]) } {
+ if { ([istarget "*-*-mingw*"]
+ || [istarget *-*-cygwin*]
+ || [istarget *-*-pe*]
+ || [istarget hppa*-*-hpux*])} {
+ # Do not need anything.
+ } elseif { [istarget *-*-freebsd*] || [istarget *-*-openbsd*] } {
+ lappend new_options "ldflags=-Wl,-rpath,${outdir}"
+ } elseif { [istarget arm*-*-symbianelf*] } {
+ if { $shlib_load } {
+ lappend new_options "libs=-ldl"
+ }
+ } else {
+ if { $shlib_load } {
+ lappend new_options "libs=-ldl"
+ }
+ lappend new_options "ldflags=-Wl,-rpath,\\\$ORIGIN"
+ }
}
+ set options $new_options
+
if [target_info exists is_vxworks] {
set options2 { "additional_flags=-Dvxworks" }
- lappend options "libs=[target_info gdb_stub]";
set options [concat $options2 $options]
}
if [info exists GDB_TESTCASE_OPTIONS] {
# reverse link order. In that case, we can use ldflags to
# avoid copying the object file to the host multiple
# times.
- lappend options "ldflags=$gdb_saved_set_unbuffered_mode_obj"
+ # This object can only be added if standard libraries are
+ # used. Thus, we need to disable it if -nostdlib option is used
+ if {[lsearch -regexp $options "-nostdlib"] < 0 } {
+ lappend options "ldflags=$gdb_saved_set_unbuffered_mode_obj"
+ }
}
}
regsub "\[\r\n\]*$" "$result" "" result;
regsub "^\[\r\n\]*" "$result" "" result;
-
- if { $result != "" && [lsearch $options quiet] == -1} {
- clone_output "gdb compile failed, $result"
+
+ if {[lsearch $options quiet] < 0} {
+ # We shall update this on a per language basis, to avoid
+ # changing the entire testsuite in one go.
+ if {[lsearch $options f77] >= 0} {
+ gdb_compile_test $source $result
+ } elseif { $result != "" } {
+ clone_output "gdb compile failed, $result"
+ }
}
return $result;
}
proc gdb_compile_pthreads {source dest type options} {
set built_binfile 0
set why_msg "unrecognized error"
- foreach lib {-lpthreads -lpthread -lthread} {
+ foreach lib {-lpthreads -lpthread -lthread ""} {
# This kind of wipes out whatever libs the caller may have
# set. Or maybe theirs will override ours. How infelicitous.
set options_with_lib [concat $options [list libs=$lib quiet]]
|| [istarget *-*-cygwin*]
|| [istarget *-*-pe*])} {
lappend link_options "additional_flags=-Wl,--out-implib,${dest}.a"
- }
+ } elseif [is_remote target] {
+ # By default, we do not set the soname. This causes the linker
+ # on ELF systems to create a DT_NEEDED entry in the executable
+ # refering to the full path name of the library. This is a
+ # problem in remote testing if the library is in a different
+ # directory there. To fix this, we set a soname of just the
+ # base filename for the library, and add an appropriate -rpath
+ # to the main executable (in gdb_compile).
+ set destbase [file tail $dest]
+ lappend link_options "additional_flags=-Wl,-soname,$destbase"
+ }
}
if {[gdb_compile "${objects}" "${dest}" executable $link_options] != ""} {
return -1
}
}
+# This is just like gdb_compile_shlib, above, except that it tries compiling
+# against several different thread libraries, to see which one this
+# system has.
+proc gdb_compile_shlib_pthreads {sources dest options} {
+ set built_binfile 0
+ set why_msg "unrecognized error"
+ foreach lib {-lpthreads -lpthread -lthread ""} {
+ # This kind of wipes out whatever libs the caller may have
+ # set. Or maybe theirs will override ours. How infelicitous.
+ set options_with_lib [concat $options [list libs=$lib quiet]]
+ set ccout [gdb_compile_shlib $sources $dest $options_with_lib]
+ switch -regexp -- $ccout {
+ ".*no posix threads support.*" {
+ set why_msg "missing threads include file"
+ break
+ }
+ ".*cannot open -lpthread.*" {
+ set why_msg "missing runtime threads library"
+ }
+ ".*Can't find library for -lpthread.*" {
+ set why_msg "missing runtime threads library"
+ }
+ {^$} {
+ pass "successfully compiled posix threads test case"
+ set built_binfile 1
+ break
+ }
+ }
+ }
+ if {!$built_binfile} {
+ unsupported "Couldn't compile $sources: ${why_msg}"
+ return -1
+ }
+}
+
# This is just like gdb_compile_pthreads, above, except that we always add the
# objc library for compiling Objective-C programs
proc gdb_compile_objc {source dest type options} {
if [info exists atimeout] {
if { ![info exists gtimeout] || $gtimeout < $atimeout } {
- set $gtimeout $atimeout;
+ set gtimeout $atimeout;
}
} else {
if ![info exists gtimeout] {
global errorInfo errorCode;
return -code error -errorinfo $errorInfo -errorcode $errorCode $string
- } elseif {$code == 2} {
- return -code return $string
- } elseif {$code == 3} {
- return
- } elseif {$code > 4} {
+ } else {
return -code $code $string
}
}
-# gdb_expect_list MESSAGE SENTINEL LIST -- expect a sequence of outputs
+# gdb_expect_list TEST SENTINEL LIST -- expect a sequence of outputs
#
# Check for long sequence of output by parts.
-# MESSAGE: is the test message to be printed with the test success/fail.
+# TEST: is the test message to be printed with the test success/fail.
# SENTINEL: Is the terminal pattern indicating that output has finished.
# LIST: is the sequence of outputs to match.
# If the sentinel is recognized early, it is considered an error.
# 1 if the test failed,
# 0 if the test passes,
# -1 if there was an internal error.
-#
+
proc gdb_expect_list {test sentinel list} {
global gdb_prompt
global suppress_flag
while { ${index} < [llength ${list}] } {
set pattern [lindex ${list} ${index}]
set index [expr ${index} + 1]
+ verbose -log "gdb_expect_list pattern: /$pattern/" 2
if { ${index} == [llength ${list}] } {
if { ${ok} } {
gdb_expect {
return -1
}
+# Return the filename to download to the target and load on the target
+# for this shared library. Normally just LIBNAME, unless shared libraries
+# for this target have separate link and load images.
+
+proc shlib_target_file { libname } {
+ return $libname
+}
+
+# Return the filename GDB will load symbols from when debugging this
+# shared library. Normally just LIBNAME, unless shared libraries for
+# this target have separate link and load images.
+
+proc shlib_symbol_file { libname } {
+ return $libname
+}
+
+# Return the filename to download to the target and load for this
+# executable. Normally just BINFILE unless it is renamed to something
+# else for this target.
+
+proc exec_target_file { binfile } {
+ return $binfile
+}
+
+# Return the filename GDB will load symbols from when debugging this
+# executable. Normally just BINFILE unless executables for this target
+# have separate files for symbols.
+
+proc exec_symbol_file { binfile } {
+ return $binfile
+}
+
+# Rename the executable file. Normally this is just BINFILE1 being renamed
+# to BINFILE2, but some targets require multiple binary files.
+proc gdb_rename_execfile { binfile1 binfile2 } {
+ file rename -force [exec_target_file ${binfile1}] \
+ [exec_target_file ${binfile2}]
+ if { [exec_target_file ${binfile1}] != [exec_symbol_file ${binfile1}] } {
+ file rename -force [exec_symbol_file ${binfile1}] \
+ [exec_symbol_file ${binfile2}]
+ }
+}
+
+# "Touch" the executable file to update the date. Normally this is just
+# BINFILE, but some targets require multiple files.
+proc gdb_touch_execfile { binfile } {
+ set time [clock seconds]
+ file mtime [exec_target_file ${binfile}] $time
+ if { [exec_target_file ${binfile}] != [exec_symbol_file ${binfile}] } {
+ file mtime [exec_symbol_file ${binfile}] $time
+ }
+}
+
# gdb_download
#
# Copy a file to the remote target and return its target filename.
}
foreach file $args {
- gdb_download $file
+ gdb_download [shlib_target_file $file]
}
# Even if the target supplies full paths for shared libraries,
proc default_gdb_init { args } {
global gdb_wrapper_initialized
+ global gdb_wrapper_target
+ global gdb_test_file_name
global cleanfiles
set cleanfiles {}
gdb_clear_suppressed;
+ set gdb_test_file_name [file rootname [file tail [lindex $args 0]]]
+
# Make sure that the wrapper is rebuilt
# with the appropriate multilib option.
- set gdb_wrapper_initialized 0
+ if { $gdb_wrapper_target != [current_target_name] } {
+ set gdb_wrapper_initialized 0
+ }
# Unlike most tests, we have a small number of tests that generate
# a very large amount of output. We therefore increase the expect
# buffer size to be able to contain the entire test output.
match_max -d 30000
+ # Also set this value for the currently running GDB.
+ match_max [match_max -d]
# We want to add the name of the TCL testcase to the PASS/FAIL messages.
if { [llength $args] > 0 } {
} else {
set gdb_prompt "\\(gdb\\)"
}
+ global use_gdb_stub
+ if [info exists use_gdb_stub] {
+ unset use_gdb_stub
+ }
+}
+
+# Turn BASENAME into a full file name in the standard output
+# directory. It is ok if BASENAME is the empty string; in this case
+# the directory is returned.
+
+proc standard_output_file {basename} {
+ global objdir subdir
+
+ return [file join $objdir $subdir $basename]
+}
+
+# Set 'testfile', 'srcfile', and 'binfile'.
+#
+# ARGS is a list of source file specifications.
+# Without any arguments, the .exp file's base name is used to
+# compute the source file name. The ".c" extension is added in this case.
+# If ARGS is not empty, each entry is a source file specification.
+# If the specification starts with a ".", it is treated as a suffix
+# to append to the .exp file's base name.
+# If the specification is the empty string, it is treated as if it
+# were ".c".
+# Otherwise it is a file name.
+# The first file in the list is used to set the 'srcfile' global.
+# Each subsequent name is used to set 'srcfile2', 'srcfile3', etc.
+#
+# Most tests should call this without arguments.
+#
+# If a completely different binary file name is needed, then it
+# should be handled in the .exp file with a suitable comment.
+
+proc standard_testfile {args} {
+ global gdb_test_file_name
+ global subdir
+ global gdb_test_file_last_vars
+
+ # Outputs.
+ global testfile binfile
+
+ set testfile $gdb_test_file_name
+ set binfile [standard_output_file ${testfile}]
+
+ if {[llength $args] == 0} {
+ set args .c
+ }
+
+ # Unset our previous output variables.
+ # This can help catch hidden bugs.
+ if {[info exists gdb_test_file_last_vars]} {
+ foreach varname $gdb_test_file_last_vars {
+ global $varname
+ catch {unset $varname}
+ }
+ }
+ # 'executable' is often set by tests.
+ set gdb_test_file_last_vars {executable}
+
+ set suffix ""
+ foreach arg $args {
+ set varname srcfile$suffix
+ global $varname
+
+ # Handle an extension.
+ if {$arg == ""} {
+ set arg $testfile.c
+ } elseif {[string range $arg 0 0] == "."} {
+ set arg $testfile$arg
+ }
+
+ set $varname $arg
+ lappend gdb_test_file_last_vars $varname
+
+ if {$suffix == ""} {
+ set suffix 2
+ } else {
+ incr suffix
+ }
+ }
+}
+
+# The default timeout used when testing GDB commands. We want to use
+# the same timeout as the default dejagnu timeout, unless the user has
+# already provided a specific value (probably through a site.exp file).
+global gdb_test_timeout
+if ![info exists gdb_test_timeout] {
+ set gdb_test_timeout $timeout
}
+# A list of global variables that GDB testcases should not use.
+# We try to prevent their use by monitoring write accesses and raising
+# an error when that happens.
+set banned_variables { bug_id prms_id }
+
+# A list of procedures that GDB testcases should not use.
+# We try to prevent their use by monitoring invocations and raising
+# an error when that happens.
+set banned_procedures { strace }
+
+# gdb_init is called by runtest at start, but also by several
+# tests directly; gdb_finish is only called from within runtest after
+# each test source execution.
+# Placing several traces by repetitive calls to gdb_init leads
+# to problems, as only one trace is removed in gdb_finish.
+# To overcome this possible problem, we add a variable that records
+# if the banned variables and procedures are already traced.
+set banned_traced 0
+
proc gdb_init { args } {
+ # Reset the timeout value to the default. This way, any testcase
+ # that changes the timeout value without resetting it cannot affect
+ # the timeout used in subsequent testcases.
+ global gdb_test_timeout
+ global timeout
+ set timeout $gdb_test_timeout
+
+ # Block writes to all banned variables, and invocation of all
+ # banned procedures...
+ global banned_variables
+ global banned_procedures
+ global banned_traced
+ if (!$banned_traced) {
+ foreach banned_var $banned_variables {
+ global "$banned_var"
+ trace add variable "$banned_var" write error
+ }
+ foreach banned_proc $banned_procedures {
+ global "$banned_proc"
+ trace add execution "$banned_proc" enter error
+ }
+ set banned_traced 1
+ }
+
+ # We set LC_ALL, LC_CTYPE, and LANG to C so that we get the same
+ # messages as expected.
+ setenv LC_ALL C
+ setenv LC_CTYPE C
+ setenv LANG C
+
+ # Don't let a .inputrc file or an existing setting of INPUTRC mess up
+ # the test results. Even if /dev/null doesn't exist on the particular
+ # platform, the readline library will use the default setting just by
+ # failing to open the file. OTOH, opening /dev/null successfully will
+ # also result in the default settings being used since nothing will be
+ # read from this file.
+ setenv INPUTRC "/dev/null"
+
+ # The gdb.base/readline.exp arrow key test relies on the standard VT100
+ # bindings, so make sure that an appropriate terminal is selected.
+ # The same bug doesn't show up if we use ^P / ^N instead.
+ setenv TERM "vt100"
+
+ # Some tests (for example gdb.base/maint.exp) shell out from gdb to use
+ # grep. Clear GREP_OPTIONS to make the behavoiur predictable,
+ # especially having color output turned on can cause tests to fail.
+ setenv GREP_OPTIONS ""
+
+ # Clear $gdbserver_reconnect_p.
+ global gdbserver_reconnect_p
+ set gdbserver_reconnect_p 1
+ unset gdbserver_reconnect_p
+
return [eval default_gdb_init $args];
}
eval remote_file target delete $cleanfiles
set cleanfiles {}
}
+
+ # Unblock write access to the banned variables. Dejagnu typically
+ # resets some of them between testcases.
+ global banned_variables
+ global banned_procedures
+ global banned_traced
+ if ($banned_traced) {
+ foreach banned_var $banned_variables {
+ global "$banned_var"
+ trace remove variable "$banned_var" write error
+ }
+ foreach banned_proc $banned_procedures {
+ global "$banned_proc"
+ trace remove execution "$banned_proc" enter error
+ }
+ set banned_traced 0
+ }
}
global debug_format
return $ret;
}
-proc gdb_step_for_stub { } {
- global gdb_prompt;
-
- if ![target_info exists gdb,use_breakpoint_for_stub] {
- if [target_info exists gdb_stub_step_command] {
- set command [target_info gdb_stub_step_command];
- } else {
- set command "step";
- }
- send_gdb "${command}\n";
- set tries 0;
- gdb_expect 60 {
- -re "(main.* at |.*in .*start).*$gdb_prompt" {
- return;
- }
- -re ".*$gdb_prompt" {
- incr tries;
- if { $tries == 5 } {
- fail "stepping out of breakpoint function";
- return;
- }
- send_gdb "${command}\n";
- exp_continue;
- }
- default {
- fail "stepping out of breakpoint function";
- return;
- }
- }
- }
- send_gdb "where\n";
- gdb_expect {
- -re "main\[^\r\n\]*at \(\[^:]+\):\(\[0-9\]+\)" {
- set file $expect_out(1,string);
- set linenum [expr $expect_out(2,string) + 1];
- set breakplace "${file}:${linenum}";
- }
- default {}
- }
- send_gdb "break ${breakplace}\n";
- gdb_expect 60 {
- -re "Breakpoint (\[0-9\]+) at.*$gdb_prompt" {
- set breakpoint $expect_out(1,string);
- }
- -re "Breakpoint (\[0-9\]+): file.*$gdb_prompt" {
- set breakpoint $expect_out(1,string);
- }
- default {}
- }
- send_gdb "continue\n";
- gdb_expect 60 {
- -re "Breakpoint ${breakpoint},.*$gdb_prompt" {
- gdb_test "delete $breakpoint" ".*" "";
- return;
- }
- default {}
+# Like setup_kfail, but only call setup_kfail conditionally if
+# istarget[TARGET] returns true.
+proc setup_kfail_for_target { PR target } {
+ if { [istarget $target] } {
+ setup_kfail $PR $target
}
}
# gdb_get_line_number TEXT [FILE]
#
# Search the source file FILE, and return the line number of the
-# first line containing TEXT. If no match is found, return -1.
+# first line containing TEXT. If no match is found, an error is thrown.
#
# TEXT is a string literal, not a regular expression.
#
}
if { [ catch { set fd [open "$file"] } message ] } then {
- perror "$message"
- return -1
+ error "$message"
}
set found -1
for { set line 1 } { 1 } { incr line } {
if { [ catch { set nchar [gets "$fd" body] } message ] } then {
- perror "$message"
- return -1
+ error "$message"
}
if { $nchar < 0 } then {
break
}
if { [ catch { close "$fd" } message ] } then {
- perror "$message"
- return -1
+ error "$message"
+ }
+
+ if {$found == -1} {
+ error "undefined tag \"$text\""
}
return $found
# stub is used, we set a breakpoint at exit because we cannot rely on
# exit() behavior of a remote target.
#
-# mssg is the error message that gets printed.
-
-proc gdb_continue_to_end {mssg} {
- if [target_info exists use_gdb_stub] {
+# MSSG is the error message that gets printed. If not given, a
+# default is used.
+# COMMAND is the command to invoke. If not given, "continue" is
+# used.
+# ALLOW_EXTRA is a flag indicating whether the test should expect
+# extra output between the "Continuing." line and the program
+# exiting. By default it is zero; if nonzero, any extra output
+# is accepted.
+
+proc gdb_continue_to_end {{mssg ""} {command continue} {allow_extra 0}} {
+ global inferior_exited_re use_gdb_stub
+
+ if {$mssg == ""} {
+ set text "continue until exit"
+ } else {
+ set text "continue until exit at $mssg"
+ }
+ if {$allow_extra} {
+ set extra ".*"
+ } else {
+ set extra ""
+ }
+ if $use_gdb_stub {
if {![gdb_breakpoint "exit"]} {
return 0
}
- gdb_test "continue" "Continuing..*Breakpoint .*exit.*" \
- "continue until exit at $mssg"
+ gdb_test $command "Continuing..*Breakpoint .*exit.*" \
+ $text
} else {
# Continue until we exit. Should not stop again.
# Don't bother to check the output of the program, that may be
# extremely tough for some remote systems.
- gdb_test "continue"\
- "Continuing.\[\r\n0-9\]+(... EXIT code 0\[\r\n\]+|Program exited normally\\.).*"\
- "continue until exit at $mssg"
+ gdb_test $command \
+ "Continuing.\[\r\n0-9\]+${extra}(... EXIT code 0\[\r\n\]+|$inferior_exited_re normally).*"\
+ $text
}
}
proc rerun_to_main {} {
- global gdb_prompt
+ global gdb_prompt use_gdb_stub
- if [target_info exists use_gdb_stub] {
+ if $use_gdb_stub {
gdb_run_cmd
gdb_expect {
-re ".*Breakpoint .*main .*$gdb_prompt $"\
# Return true if a test should be skipped due to lack of XML support
# in the host GDB.
+# NOTE: This must be called while gdb is *not* running.
proc gdb_skip_xml_test { } {
global gdb_prompt
# Note: the procedure gdb_gnu_strip_debug will produce an executable called
# ${binfile}.dbglnk, which is just like the executable ($binfile) but without
# the debuginfo. Instead $binfile has a .gnu_debuglink section which contains
-# the name of a debuginfo only file. This file will be stored in the
-# gdb.base/.debug subdirectory.
+# the name of a debuginfo only file. This file will be stored in the same
+# subdirectory.
# Functions for separate debug info testing
# at the end of the process we have:
# foo.stripped --> foo w/o debug info
-# .debug/foo.debug --> foo's debug info
+# foo.debug --> foo's debug info
# foo --> like foo, but with a new .gnu_debuglink section pointing to foo.debug.
-# Return the name of the file in which we should stor EXEC's separated
-# debug info. EXEC contains the full path.
-proc separate_debug_filename { exec } {
-
- # In a .debug subdirectory off the same directory where the testcase
- # executable is going to be. Something like:
- # <your-path>/gdb/testsuite/gdb.base/.debug/blah.debug.
- # This is the default location where gdb expects to findi
- # the debug info file.
-
- set exec_dir [file dirname $exec]
- set exec_file [file tail $exec]
- set debug_dir [file join $exec_dir ".debug"]
- set debug_file [file join $debug_dir "${exec_file}.debug"]
-
- return $debug_file
-}
-
# Return the build-id hex string (usually 160 bits as 40 hex characters)
# converted to the form: .build-id/ab/cdef1234...89.debug
# Return "" if no build-id found.
}
# Convert it to hex.
binary scan $data H* data
- set data [regsub {^..} $data {\0/}]
+ regsub {^..} $data {\0/} data
return ".build-id/${data}.debug";
}
# Create stripped files for DEST, replacing it. If ARGS is passed, it is a
# list of optional flags. The only currently supported flag is no-main,
# which removes the symbol entry for main from the separate debug file.
+#
+# Function returns zero on success. Function will return non-zero failure code
+# on some targets not supporting separate debug info (such as i386-msdos).
proc gdb_gnu_strip_debug { dest args } {
- set debug_file [separate_debug_filename $dest]
+ # Use the first separate debug info file location searched by GDB so the
+ # run cannot be broken by some stale file searched with higher precedence.
+ set debug_file "${dest}.debug"
+
set strip_to_file_program [transform strip]
set objcopy_program [transform objcopy]
- # Make sure the directory that will hold the separated debug
- # info actually exists.
- set debug_dir [file dirname $debug_file]
- if {! [file isdirectory $debug_dir]} {
- file mkdir $debug_dir
- }
-
set debug_link [file tail $debug_file]
set stripped_file "${dest}.stripped"
return 1
}
+ # Workaround PR binutils/10802:
+ # Preserve the 'x' bit also for PIEs (Position Independent Executables).
+ set perm [file attributes ${dest} -permissions]
+ file attributes ${stripped_file} -permissions $perm
+
# Get rid of everything but the debug info, and store result in debug_file
# This will be in the .debug subdirectory, see above.
set result [catch "exec $strip_to_file_program --only-keep-debug ${dest} -o ${debug_file}" output]
return 1
}
- return 0
+ # Workaround PR binutils/10802:
+ # Preserve the 'x' bit also for PIEs (Position Independent Executables).
+ set perm [file attributes ${stripped_file} -permissions]
+ file attributes ${dest} -permissions $perm
+
+ return 0
}
# Test the output of GDB_COMMAND matches the pattern obtained
gdb_test "${gdb_command}" "${expected_output}" $message
}
-# Test the output of "help COMMNAD_CLASS". EXPECTED_INITIAL_LINES
+# Test the output of "help COMMAND_CLASS". EXPECTED_INITIAL_LINES
# are regular expressions that should match the beginning of output,
# before the list of commands in that class. The presence of
# command list and standard epilogue will be tested automatically.
}
}
-# Build executable named EXECUTABLE, from SOURCES. If SOURCES are not
-# provided, uses $EXECUTABLE.c. The TESTNAME paramer is the name of test
-# to pass to untested, if something is wrong. OPTIONS are passed
-# to gdb_compile directly.
-proc build_executable { testname executable {sources ""} {options {debug}} } {
-
- global objdir
+# Build executable named EXECUTABLE from specifications that allow
+# different options to be passed to different sub-compilations.
+# TESTNAME is the name of the test; this is passed to 'untested' if
+# something fails.
+# OPTIONS is passed to the final link, using gdb_compile.
+# ARGS is a flat list of source specifications, of the form:
+# { SOURCE1 OPTIONS1 [ SOURCE2 OPTIONS2 ]... }
+# Each SOURCE is compiled to an object file using its OPTIONS,
+# using gdb_compile.
+# Returns 0 on success, -1 on failure.
+proc build_executable_from_specs {testname executable options args} {
global subdir
global srcdir
- if {[llength $sources]==0} {
- set sources ${executable}.c
- }
- set binfile ${objdir}/${subdir}/${executable}
+ set binfile [standard_output_file $executable]
set objects {}
- for {set i 0} "\$i<[llength $sources]" {incr i} {
- set s [lindex $sources $i]
- if { [gdb_compile "${srcdir}/${subdir}/${s}" "${binfile}${i}.o" object $options] != "" } {
+ set i 0
+ foreach {s local_options} $args {
+ if { [gdb_compile "${srcdir}/${subdir}/${s}" "${binfile}${i}.o" object $local_options] != "" } {
untested $testname
return -1
}
lappend objects "${binfile}${i}.o"
+ incr i
}
if { [gdb_compile $objects "${binfile}" executable $options] != "" } {
return -1
}
- if [get_compiler_info ${binfile}] {
+ set info_options ""
+ if { [lsearch -exact $options "c++"] >= 0 } {
+ set info_options "c++"
+ }
+ if [get_compiler_info ${info_options}] {
return -1
}
return 0
}
+# Build executable named EXECUTABLE, from SOURCES. If SOURCES are not
+# provided, uses $EXECUTABLE.c. The TESTNAME paramer is the name of test
+# to pass to untested, if something is wrong. OPTIONS are passed
+# to gdb_compile directly.
+proc build_executable { testname executable {sources ""} {options {debug}} } {
+ if {[llength $sources]==0} {
+ set sources ${executable}.c
+ }
+
+ set arglist [list $testname $executable $options]
+ foreach source $sources {
+ lappend arglist $source $options
+ }
+
+ return [eval build_executable_from_specs $arglist]
+}
+
# Starts fresh GDB binary and loads EXECUTABLE into GDB. EXECUTABLE is
-# the name of binary in ${objdir}/${subdir}.
+# the basename of the binary.
proc clean_restart { executable } {
global srcdir
- global objdir
global subdir
- set binfile ${objdir}/${subdir}/${executable}
+ set binfile [standard_output_file ${executable}]
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
+}
- if [target_info exists gdb_stub] {
- gdb_step_for_stub;
- }
+# Prepares for testing by calling build_executable_full, then
+# clean_restart.
+# TESTNAME is the name of the test.
+# Each element in ARGS is a list of the form
+# { EXECUTABLE OPTIONS SOURCE_SPEC... }
+# These are passed to build_executable_from_specs, which see.
+# The last EXECUTABLE is passed to clean_restart.
+# Returns 0 on success, non-zero on failure.
+proc prepare_for_testing_full {testname args} {
+ foreach spec $args {
+ if {[eval build_executable_from_specs [list $testname] $spec] == -1} {
+ return -1
+ }
+ set executable [lindex $spec 0]
+ }
+ clean_restart $executable
+ return 0
}
# Prepares for testing, by calling build_executable, and then clean_restart.
return [get_integer_valueof "sizeof (${type})" $default]
}
+# Get the current value for remotetimeout and return it.
+proc get_remotetimeout { } {
+ global gdb_prompt
+ global decimal
+
+ gdb_test_multiple "show remotetimeout" "" {
+ -re "Timeout limit to wait for target to respond is ($decimal).*$gdb_prompt $" {
+ return $expect_out(1,string);
+ }
+ }
+
+ # Pick the default that gdb uses
+ warning "Unable to read remotetimeout"
+ return 300
+}
+
+# Set the remotetimeout to the specified timeout. Nothing is returned.
+proc set_remotetimeout { timeout } {
+ global gdb_prompt
+
+ gdb_test_multiple "set remotetimeout $timeout" "" {
+ -re "$gdb_prompt $" {
+ verbose "Set remotetimeout to $timeout\n"
+ }
+ }
+}
+
# Log gdb command line and script if requested.
if {[info exists TRANSCRIPT]} {
rename send_gdb real_send_gdb
return [uplevel real_send_gdb $args]
}
}
+
+proc core_find {binfile {deletefiles {}} {arg ""}} {
+ global objdir subdir
+
+ set destcore "$binfile.core"
+ file delete $destcore
+
+ # Create a core file named "$destcore" rather than just "core", to
+ # avoid problems with sys admin types that like to regularly prune all
+ # files named "core" from the system.
+ #
+ # Arbitrarily try setting the core size limit to "unlimited" since
+ # this does not hurt on systems where the command does not work and
+ # allows us to generate a core on systems where it does.
+ #
+ # Some systems append "core" to the name of the program; others append
+ # the name of the program to "core"; still others (like Linux, as of
+ # May 2003) create cores named "core.PID". In the latter case, we
+ # could have many core files lying around, and it may be difficult to
+ # tell which one is ours, so let's run the program in a subdirectory.
+ set found 0
+ set coredir [standard_output_file coredir.[getpid]]
+ file mkdir $coredir
+ catch "system \"(cd ${coredir}; ulimit -c unlimited; ${binfile} ${arg}; true) >/dev/null 2>&1\""
+ # remote_exec host "${binfile}"
+ foreach i "${coredir}/core ${coredir}/core.coremaker.c ${binfile}.core" {
+ if [remote_file build exists $i] {
+ remote_exec build "mv $i $destcore"
+ set found 1
+ }
+ }
+ # Check for "core.PID".
+ if { $found == 0 } {
+ set names [glob -nocomplain -directory $coredir core.*]
+ if {[llength $names] == 1} {
+ set corefile [file join $coredir [lindex $names 0]]
+ remote_exec build "mv $corefile $destcore"
+ set found 1
+ }
+ }
+ if { $found == 0 } {
+ # The braindamaged HPUX shell quits after the ulimit -c above
+ # without executing ${binfile}. So we try again without the
+ # ulimit here if we didn't find a core file above.
+ # Oh, I should mention that any "braindamaged" non-Unix system has
+ # the same problem. I like the cd bit too, it's really neat'n stuff.
+ catch "system \"(cd ${objdir}/${subdir}; ${binfile}; true) >/dev/null 2>&1\""
+ foreach i "${objdir}/${subdir}/core ${objdir}/${subdir}/core.coremaker.c ${binfile}.core" {
+ if [remote_file build exists $i] {
+ remote_exec build "mv $i $destcore"
+ set found 1
+ }
+ }
+ }
+
+ # Try to clean up after ourselves.
+ foreach deletefile $deletefiles {
+ remote_file build delete [file join $coredir $deletefile]
+ }
+ remote_exec build "rmdir $coredir"
+
+ if { $found == 0 } {
+ warning "can't generate a core file - core tests suppressed - check ulimit -c"
+ return ""
+ }
+ return $destcore
+}
+
+# gdb_target_symbol_prefix_flags returns a string that can be added
+# to gdb_compile options to define SYMBOL_PREFIX macro value
+# symbol_prefix_flags returns a string that can be added
+# for targets that use underscore as symbol prefix.
+# TODO: find out automatically if the target needs this.
+
+proc gdb_target_symbol_prefix_flags {} {
+ if { [istarget "*-*-cygwin*"] || [istarget "i?86-*-mingw*"]
+ || [istarget "*-*-msdosdjgpp*"] || [istarget "*-*-go32*"] } {
+ return "additional_flags=-DSYMBOL_PREFIX=\"_\""
+ } else {
+ return ""
+ }
+}
+
+# Always load compatibility stuff.
+load_lib future.exp