}
-re "$gdb_prompt $" {}
timeout {
- perror "couldn't unload file in $GDB (timed out)."
+ perror "couldn't unload file in $GDB (timeout)."
return -1
}
}
# Set a breakpoint at FUNCTION. If there is an additional argument it is
# a list of options; the supported options are allow-pending, temporary,
-# and no-message.
+# message, no-message, and passfail.
+# The result is 1 for success, 0 for failure.
+#
+# Note: The handling of message vs no-message is messed up, but it's based
+# on historical usage. By default this function does not print passes,
+# only fails.
+# no-message: turns off printing of fails (and passes, but they're already off)
+# message: turns on printing of passes (and fails, but they're already on)
proc gdb_breakpoint { function args } {
global gdb_prompt
global decimal
set pending_response n
- if {[lsearch -exact [lindex $args 0] allow-pending] != -1} {
+ if {[lsearch -exact $args allow-pending] != -1} {
set pending_response y
}
set break_command "break"
set break_message "Breakpoint"
- if {[lsearch -exact [lindex $args 0] temporary] != -1} {
+ if {[lsearch -exact $args temporary] != -1} {
set break_command "tbreak"
set break_message "Temporary breakpoint"
}
- set no_message 0
- if {[lsearch -exact [lindex $args 0] no-message] != -1} {
- set no_message 1
+ set print_pass 0
+ set print_fail 1
+ set no_message_loc [lsearch -exact $args no-message]
+ set message_loc [lsearch -exact $args message]
+ # The last one to appear in args wins.
+ if { $no_message_loc > $message_loc } {
+ set print_fail 0
+ } elseif { $message_loc > $no_message_loc } {
+ set print_pass 1
}
+ set test_name "setting breakpoint at $function"
+
send_gdb "$break_command $function\n"
# The first two regexps are what we get with -g, the third is without -g.
gdb_expect 30 {
-re "$break_message \[0-9\]* at .*$gdb_prompt $" {}
-re "$break_message \[0-9\]* \\(.*\\) pending.*$gdb_prompt $" {
if {$pending_response == "n"} {
- if { $no_message == 0 } {
- fail "setting breakpoint at $function"
+ if { $print_fail } {
+ fail $test_name
}
return 0
}
exp_continue
}
-re "A problem internal to GDB has been detected" {
- fail "setting breakpoint at $function in runto (GDB internal error)"
+ if { $print_fail } {
+ fail "$test_name (GDB internal error)"
+ }
gdb_internal_error_resync
return 0
}
-re "$gdb_prompt $" {
- if { $no_message == 0 } {
- fail "setting breakpoint at $function"
+ if { $print_fail } {
+ fail $test_name
+ }
+ return 0
+ }
+ eof {
+ if { $print_fail } {
+ fail "$test_name (eof)"
}
return 0
}
timeout {
- if { $no_message == 0 } {
- fail "setting breakpoint at $function (timeout)"
+ if { $print_fail } {
+ fail "$test_name (timeout)"
}
return 0
}
}
+ if { $print_pass } {
+ pass $test_name
+ }
return 1;
}
# Since this is the only breakpoint that will be set, if it stops
# at a breakpoint, we will assume it is the one we want. We can't
# just compare to "function" because it might be a fully qualified,
-# single quoted C++ function specifier. If there's an additional argument,
-# pass it to gdb_breakpoint.
+# single quoted C++ function specifier.
+#
+# If there are additional arguments, pass them to gdb_breakpoint.
+# We recognize no-message/message ourselves.
+# The default is no-message.
+# no-message is messed up here, like gdb_breakpoint: to preserve
+# historical usage fails are always printed by default.
+# no-message: turns off printing of fails (and passes, but they're already off)
+# message: turns on printing of passes (and fails, but they're already on)
proc runto { function args } {
global gdb_prompt
delete_breakpoints
- if ![gdb_breakpoint $function [lindex $args 0]] {
+ # Default to "no-message".
+ set args "no-message $args"
+
+ set print_pass 0
+ set print_fail 1
+ set no_message_loc [lsearch -exact $args no-message]
+ set message_loc [lsearch -exact $args message]
+ # The last one to appear in args wins.
+ if { $no_message_loc > $message_loc } {
+ set print_fail 0
+ } elseif { $message_loc > $no_message_loc } {
+ set print_pass 1
+ }
+
+ set test_name "running to $function in runto"
+
+ # We need to use eval here to pass our varargs args to gdb_breakpoint
+ # which is also a varargs function.
+ # But we also have to be careful because $function may have multiple
+ # elements, and we don't want Tcl to move the remaining elements after
+ # the first to $args. That is why $function is wrapped in {}.
+ if ![eval gdb_breakpoint {$function} $args] {
return 0;
}
# the "in func" output we get without -g.
gdb_expect 30 {
-re "Break.* at .*:$decimal.*$gdb_prompt $" {
+ if { $print_pass } {
+ pass $test_name
+ }
return 1
}
-re "Breakpoint \[0-9\]*, \[0-9xa-f\]* in .*$gdb_prompt $" {
+ if { $print_pass } {
+ pass $test_name
+ }
return 1
}
-re "The target does not support running in non-stop mode.\r\n$gdb_prompt $" {
- unsupported "Non-stop mode not supported"
+ if { $print_fail } {
+ unsupported "Non-stop mode not supported"
+ }
return 0
}
-re ".*A problem internal to GDB has been detected" {
- fail "running to $function in runto (GDB internal error)"
+ if { $print_fail } {
+ fail "$test_name (GDB internal error)"
+ }
gdb_internal_error_resync
return 0
}
-re "$gdb_prompt $" {
- fail "running to $function in runto"
+ if { $print_fail } {
+ fail $test_name
+ }
return 0
}
eof {
- fail "running to $function in runto (end of file)"
+ if { $print_fail } {
+ fail "$test_name (eof)"
+ }
return 0
}
timeout {
- fail "running to $function in runto (timeout)"
+ if { $print_fail } {
+ fail "$test_name (timeout)"
+ }
return 0
}
}
+ if { $print_pass } {
+ pass $test_name
+ }
return 1
}
# If you don't want that, use gdb_start_cmd.
proc runto_main { } {
- return [runto main]
+ return [runto main no-message]
}
### Continue, and expect to hit a breakpoint.
send_gdb "continue\n"
gdb_expect {
- -re "Breakpoint .* (at|in) $location_pattern\r\n$gdb_prompt $" {
+ -re "(?:Breakpoint|Temporary breakpoint) .* (at|in) $location_pattern\r\n$gdb_prompt $" {
pass $full_name
}
-re ".*$gdb_prompt $" {
proc gdb_internal_error_resync {} {
global gdb_prompt
+ verbose -log "Resyncing due to internal error."
+
set count 0
while {$count < 10} {
gdb_expect {
global GDB
global last_loaded_file
+ # Save this for the benefit of gdbserver-support.exp.
set last_loaded_file $arg
# Set whether debug info was found.
send_gdb "file $arg\n"
gdb_expect 120 {
-re "Reading symbols from.*no debugging symbols found.*done.*$gdb_prompt $" {
- verbose "\t\tLoaded $arg into the $GDB with no debugging symbols"
+ verbose "\t\tLoaded $arg into $GDB with no debugging symbols"
set gdb_file_cmd_debug_info "nodebug"
return 0
}
-re "Reading symbols from.*done.*$gdb_prompt $" {
- verbose "\t\tLoaded $arg into the $GDB"
+ verbose "\t\tLoaded $arg into $GDB"
set gdb_file_cmd_debug_info "debug"
return 0
}
return 0
}
timeout {
- perror "(timeout) Couldn't load $arg, other program already loaded."
+ perror "Couldn't load $arg, other program already loaded (timeout)."
return -1
}
+ eof {
+ perror "Couldn't load $arg, other program already loaded (eof)."
+ return -1
+ }
}
}
-re "No such file or directory.*$gdb_prompt $" {
perror "($arg) No such file or directory"
return -1
}
+ -re "A problem internal to GDB has been detected" {
+ fail "($arg) (GDB internal error)"
+ gdb_internal_error_resync
+ return -1
+ }
-re "$gdb_prompt $" {
- perror "couldn't load $arg into $GDB."
+ perror "Couldn't load $arg into $GDB."
return -1
}
timeout {
- perror "couldn't load $arg into $GDB (timed out)."
+ perror "Couldn't load $arg into $GDB (timeout)."
return -1
}
eof {
# This is an attempt to detect a core dump, but seems not to
# work. Perhaps we need to match .* followed by eof, in which
# gdb_expect does not seem to have a way to do that.
- perror "couldn't load $arg into $GDB (end of file)."
+ perror "Couldn't load $arg into $GDB (eof)."
return -1
}
}
# Make sure we have a compiler that understands altivec.
set compile_flags {debug nowarnings}
- if [get_compiler_info not-used] {
+ if [get_compiler_info] {
warning "Could not get compiler info"
return 1
}
# Make sure we have a compiler that understands altivec.
set compile_flags {debug nowarnings quiet}
- if [get_compiler_info not-used] {
+ if [get_compiler_info] {
warning "Could not get compiler info"
return 1
}
return 0
}
+# Return 1 if we should skip tests that require the runtime unwinder
+# hook. This must be invoked while gdb is running, after shared
+# libraries have been loaded. This is needed because otherwise a
+# shared libgcc won't be visible.
+
+proc skip_unwinder_tests {} {
+ global gdb_prompt
+
+ set ok 0
+ gdb_test_multiple "print _Unwind_DebugHook" "check for unwinder hook" {
+ -re "= .*no debug info.*_Unwind_DebugHook.*\r\n$gdb_prompt $" {
+ }
+ -re "= .*_Unwind_DebugHook.*\r\n$gdb_prompt $" {
+ set ok 1
+ }
+ -re "No symbol .* in current context.\r\n$gdb_prompt $" {
+ }
+ }
+ if {!$ok} {
+ gdb_test_multiple "info probe" "check for stap probe in unwinder" {
+ -re ".*libgcc.*unwind.*\r\n$gdb_prompt $" {
+ set ok 1
+ }
+ -re "\r\n$gdb_prompt $" {
+ }
+ }
+ }
+ return $ok
+}
+
set compiler_info "unknown"
set gcc_compiled 0
set hp_cc_compiler 0
# Figure out what compiler I am using.
#
-# BINFILE is a "compiler information" output file. This implementation
-# does not use BINFILE.
-#
-# ARGS can be empty or "C++". If empty, "C" is assumed.
+# ARG can be empty or "C++". If empty, "C" is assumed.
#
# There are several ways to do this, with various problems.
#
#
# -- chastain 2004-01-06
-proc get_compiler_info {binfile args} {
+proc get_compiler_info {{arg ""}} {
# For compiler.c and compiler.cc
global srcdir
# Choose which file to preprocess.
set ifile "${srcdir}/lib/compiler.c"
- if { [llength $args] > 0 && [lindex $args 0] == "c++" } {
+ if { $arg == "c++" } {
set ifile "${srcdir}/lib/compiler.cc"
}
# We have to use -E and -o together, despite the comments
# above, because of how DejaGnu handles remote host testing.
set ppout "$outdir/compiler.i"
- gdb_compile "${ifile}" "$ppout" preprocess [list "$args" quiet]
+ gdb_compile "${ifile}" "$ppout" preprocess [list "$arg" quiet]
set file [open $ppout r]
set cppout [read $file]
close $file
} else {
- set cppout [ gdb_compile "${ifile}" "" preprocess [list "$args" quiet] ]
+ set cppout [ gdb_compile "${ifile}" "" preprocess [list "$arg" quiet] ]
}
log_file -a "$outdir/$tool.log"
return -1
}
+# Invoke "gcore". CORE is the name of the core file to write. TEST
+# is the name of the test case. This will return 1 if the core file
+# was created, 0 otherwise. If this fails to make a core file because
+# this configuration of gdb does not support making core files, it
+# will call "unsupported", not "fail". However, if this fails to make
+# a core file for some other reason, then it will call "fail".
+
+proc gdb_gcore_cmd {core test} {
+ global gdb_prompt
+
+ set result 0
+ gdb_test_multiple "gcore $core" $test {
+ -re "Saved corefile .*\[\r\n\]+$gdb_prompt $" {
+ pass $test
+ set result 1
+ }
+
+ -re "Undefined command.*$gdb_prompt $" {
+ unsupported $test
+ verbose -log "'gcore' command undefined in gdb_gcore_cmd"
+ }
+
+ -re "Can't create a corefile\[\r\n\]+$gdb_prompt $" {
+ unsupported $test
+ }
+ }
+
+ return $result
+}
+
# Return the filename to download to the target and load on the target
# for this shared library. Normally just LIBNAME, unless shared libraries
# for this target have separate link and load images.
proc default_gdb_init { args } {
global gdb_wrapper_initialized
global gdb_wrapper_target
+ global gdb_test_file_name
global cleanfiles
set cleanfiles {}
gdb_clear_suppressed;
+ set gdb_test_file_name [file rootname [file tail [lindex $args 0]]]
+
# Make sure that the wrapper is rebuilt
# with the appropriate multilib option.
if { $gdb_wrapper_target != [current_target_name] } {
}
}
+# Turn BASENAME into a full file name in the standard output
+# directory. It is ok if BASENAME is the empty string; in this case
+# the directory is returned.
+
+proc standard_output_file {basename} {
+ global objdir subdir
+
+ return [file join $objdir $subdir $basename]
+}
+
+# Set 'testfile', 'srcfile', and 'binfile'.
+#
+# ARGS is a list of source file specifications.
+# Without any arguments, the .exp file's base name is used to
+# compute the source file name. The ".c" extension is added in this case.
+# If ARGS is not empty, each entry is a source file specification.
+# If the specification starts with a ".", it is treated as a suffix
+# to append to the .exp file's base name.
+# If the specification is the empty string, it is treated as if it
+# were ".c".
+# Otherwise it is a file name.
+# The first file in the list is used to set the 'srcfile' global.
+# Each subsequent name is used to set 'srcfile2', 'srcfile3', etc.
+#
+# Most tests should call this without arguments.
+#
+# If a completely different binary file name is needed, then it
+# should be handled in the .exp file with a suitable comment.
+
+proc standard_testfile {args} {
+ global gdb_test_file_name
+ global subdir
+ global gdb_test_file_last_vars
+
+ # Outputs.
+ global testfile binfile
+
+ set testfile $gdb_test_file_name
+ set binfile [standard_output_file ${testfile}]
+
+ if {[llength $args] == 0} {
+ set args .c
+ }
+
+ # Unset our previous output variables.
+ # This can help catch hidden bugs.
+ if {[info exists gdb_test_file_last_vars]} {
+ foreach varname $gdb_test_file_last_vars {
+ global $varname
+ catch {unset $varname}
+ }
+ }
+ # 'executable' is often set by tests.
+ set gdb_test_file_last_vars {executable}
+
+ set suffix ""
+ foreach arg $args {
+ set varname srcfile$suffix
+ global $varname
+
+ # Handle an extension.
+ if {$arg == ""} {
+ set arg $testfile.c
+ } elseif {[string range $arg 0 0] == "."} {
+ set arg $testfile$arg
+ }
+
+ set $varname $arg
+ lappend gdb_test_file_last_vars $varname
+
+ if {$suffix == ""} {
+ set suffix 2
+ } else {
+ incr suffix
+ }
+ }
+}
+
# The default timeout used when testing GDB commands. We want to use
# the same timeout as the default dejagnu timeout, unless the user has
# already provided a specific value (probably through a site.exp file).
return 1;
}
timeout {
- warning "couldn't check debug format (timed out)."
+ warning "couldn't check debug format (timeout)."
return 1;
}
}
return $ret;
}
-# Like setup_kfail, but only call setup_kfail conditionally if
-# istarget[TARGET] returns true.
-proc setup_kfail_for_target { PR target } {
- if { [istarget $target] } {
- setup_kfail $PR $target
- }
-}
-
# gdb_get_line_number TEXT [FILE]
#
# Search the source file FILE, and return the line number of the
}
}
-# Build executable named EXECUTABLE, from SOURCES. If SOURCES are not
-# provided, uses $EXECUTABLE.c. The TESTNAME paramer is the name of test
-# to pass to untested, if something is wrong. OPTIONS are passed
-# to gdb_compile directly.
-proc build_executable { testname executable {sources ""} {options {debug}} } {
-
- global objdir
+# Build executable named EXECUTABLE from specifications that allow
+# different options to be passed to different sub-compilations.
+# TESTNAME is the name of the test; this is passed to 'untested' if
+# something fails.
+# OPTIONS is passed to the final link, using gdb_compile.
+# ARGS is a flat list of source specifications, of the form:
+# { SOURCE1 OPTIONS1 [ SOURCE2 OPTIONS2 ]... }
+# Each SOURCE is compiled to an object file using its OPTIONS,
+# using gdb_compile.
+# Returns 0 on success, -1 on failure.
+proc build_executable_from_specs {testname executable options args} {
global subdir
global srcdir
- if {[llength $sources]==0} {
- set sources ${executable}.c
- }
- set binfile ${objdir}/${subdir}/${executable}
+ set binfile [standard_output_file $executable]
set objects {}
- for {set i 0} "\$i<[llength $sources]" {incr i} {
- set s [lindex $sources $i]
- if { [gdb_compile "${srcdir}/${subdir}/${s}" "${binfile}${i}.o" object $options] != "" } {
+ set i 0
+ foreach {s local_options} $args {
+ if { [gdb_compile "${srcdir}/${subdir}/${s}" "${binfile}${i}.o" object $local_options] != "" } {
untested $testname
return -1
}
lappend objects "${binfile}${i}.o"
+ incr i
}
if { [gdb_compile $objects "${binfile}" executable $options] != "" } {
if { [lsearch -exact $options "c++"] >= 0 } {
set info_options "c++"
}
- if [get_compiler_info ${binfile} ${info_options}] {
+ if [get_compiler_info ${info_options}] {
return -1
}
return 0
}
+# Build executable named EXECUTABLE, from SOURCES. If SOURCES are not
+# provided, uses $EXECUTABLE.c. The TESTNAME paramer is the name of test
+# to pass to untested, if something is wrong. OPTIONS are passed
+# to gdb_compile directly.
+proc build_executable { testname executable {sources ""} {options {debug}} } {
+ if {[llength $sources]==0} {
+ set sources ${executable}.c
+ }
+
+ set arglist [list $testname $executable $options]
+ foreach source $sources {
+ lappend arglist $source $options
+ }
+
+ return [eval build_executable_from_specs $arglist]
+}
+
# Starts fresh GDB binary and loads EXECUTABLE into GDB. EXECUTABLE is
-# the name of binary in ${objdir}/${subdir}.
+# the basename of the binary.
proc clean_restart { executable } {
global srcdir
- global objdir
global subdir
- set binfile ${objdir}/${subdir}/${executable}
+ set binfile [standard_output_file ${executable}]
gdb_exit
gdb_start
gdb_load ${binfile}
}
+# Prepares for testing by calling build_executable_full, then
+# clean_restart.
+# TESTNAME is the name of the test.
+# Each element in ARGS is a list of the form
+# { EXECUTABLE OPTIONS SOURCE_SPEC... }
+# These are passed to build_executable_from_specs, which see.
+# The last EXECUTABLE is passed to clean_restart.
+# Returns 0 on success, non-zero on failure.
+proc prepare_for_testing_full {testname args} {
+ foreach spec $args {
+ if {[eval build_executable_from_specs [list $testname] $spec] == -1} {
+ return -1
+ }
+ set executable [lindex $spec 0]
+ }
+ clean_restart $executable
+ return 0
+}
+
# Prepares for testing, by calling build_executable, and then clean_restart.
# Please refer to build_executable for parameter description.
proc prepare_for_testing { testname executable {sources ""} {options {debug}}} {
# could have many core files lying around, and it may be difficult to
# tell which one is ours, so let's run the program in a subdirectory.
set found 0
- set coredir "${objdir}/${subdir}/coredir.[getpid]"
+ set coredir [standard_output_file coredir.[getpid]]
file mkdir $coredir
catch "system \"(cd ${coredir}; ulimit -c unlimited; ${binfile} ${arg}; true) >/dev/null 2>&1\""
# remote_exec host "${binfile}"
projects / deliverable / binutils-gdb.git / blobdiff