-# Copyright (C) 1992, 1994, 1995, 1997 Free Software Foundation, Inc.
+# Copyright (C) 1992, 1994, 1995, 1997, 1999 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
}
verbose "using CHILL_RT0 = $CHILL_RT0" 2
+if [info exists TOOL_EXECUTABLE] {
+ set GDB $TOOL_EXECUTABLE;
+}
if ![info exists GDB] {
if ![is_remote host] {
set GDB [findfile $base_dir/../../gdb/gdb "$base_dir/../../gdb/gdb" [transform gdb]]
}
verbose "using GDBFLAGS = $GDBFLAGS" 2
-# The variable prompt is a regexp which matches the gdb prompt. Set it if it
-# is not already set.
+# The variable gdb_prompt is a regexp which matches the gdb prompt.
+# Set it if it is not already set.
global gdb_prompt
-if ![info exists prompt] then {
+if ![info exists gdb_prompt] then {
set gdb_prompt "\[(\]gdb\[)\]"
}
+# Needed for some tests under Cygwin.
+global EXEEXT
+global env
+
+if ![info exists env(EXEEXT)] {
+ set EXEEXT ""
+} else {
+ set EXEEXT $env(EXEEXT)
+}
+
+### Only procedures should come after this point.
+
#
# gdb_version -- extract and print the version number of GDB
#
global gdb_prompt
send_gdb "file\n"
gdb_expect 60 {
- -re "No exec file now\[^\r\n\]*\[\r\n\]" { exp_continue }
+ -re "No executable file now\[^\r\n\]*\[\r\n\]" { exp_continue }
-re "No symbol file now\[^\r\n\]*\[\r\n\]" { exp_continue }
-re "A program is being debugged already..*Kill it.*y or n. $"\
{ send_gdb "y\n"
proc delete_breakpoints {} {
global gdb_prompt
+ # we need a larger timeout value here or this thing just confuses
+ # itself. May need a better implementation if possible. - guo
+ #
send_gdb "delete breakpoints\n"
- gdb_expect 30 {
+ gdb_expect 100 {
-re "Delete all breakpoints.*y or n.*$" {
send_gdb "y\n";
exp_continue
timeout { perror "Delete all breakpoints in delete_breakpoints (timeout)" ; return }
}
send_gdb "info breakpoints\n"
- gdb_expect 30 {
+ gdb_expect 100 {
-re "No breakpoints or watchpoints..*$gdb_prompt $" {}
-re "$gdb_prompt $" { perror "breakpoints not deleted" ; return }
-re "Delete all breakpoints.*or n.*$" {
}
if [target_info exists use_gdb_stub] {
+ if [target_info exists gdb,do_reload_on_run] {
+ # Specifying no file, defaults to the executable
+ # currently being debugged.
+ if { [gdb_load ""] < 0 } {
+ return;
+ }
+ send_gdb "continue\n";
+ gdb_expect 60 {
+ -re "Continu\[^\r\n\]*\[\r\n\]" {}
+ default {}
+ }
+ return;
+ }
+
if [target_info exists gdb,start_symbol] {
set start [target_info gdb,start_symbol];
} else {
set start "start";
}
send_gdb "jump *$start\n"
- gdb_expect 30 {
- -re "Continuing at \[^\r\n\]*\[\r\n\]" {
- if ![target_info exists gdb_stub] {
- return;
- }
- }
- -re "No symbol \"start\" in current.*$gdb_prompt $" {
- send_gdb "jump *_start\n";
- exp_continue;
- }
- -re "No symbol \"_start\" in current.*$gdb_prompt $" {
- perror "Can't find start symbol to run in gdb_run";
+ set start_attempt 1;
+ while { $start_attempt } {
+ # Cap (re)start attempts at three to ensure that this loop
+ # always eventually fails. Don't worry about trying to be
+ # clever and not send a command when it has failed.
+ if [expr $start_attempt > 3] {
+ perror "Jump to start() failed (retry count exceeded)";
return;
}
- -re "Line.* Jump anyway.*y or n. $" {
- send_gdb "y\n"
- exp_continue;
- }
- -re "No symbol.*context.*$gdb_prompt $" {}
- -re "The program is not being run.*$gdb_prompt $" {
- gdb_load "";
- send_gdb "jump *$start\n";
- exp_continue;
+ set start_attempt [expr $start_attempt + 1];
+ gdb_expect 30 {
+ -re "Continuing at \[^\r\n\]*\[\r\n\]" {
+ set start_attempt 0;
+ }
+ -re "No symbol \"_start\" in current.*$gdb_prompt $" {
+ perror "Can't find start symbol to run in gdb_run";
+ return;
+ }
+ -re "No symbol \"start\" in current.*$gdb_prompt $" {
+ send_gdb "jump *_start\n";
+ }
+ -re "No symbol.*context.*$gdb_prompt $" {
+ set start_attempt 0;
+ }
+ -re "Line.* Jump anyway.*y or n. $" {
+ send_gdb "y\n"
+ }
+ -re "The program is not being run.*$gdb_prompt $" {
+ if { [gdb_load ""] < 0 } {
+ return;
+ }
+ send_gdb "jump *$start\n";
+ }
+ timeout {
+ perror "Jump to start() failed (timeout)";
+ return
+ }
}
- timeout { perror "Jump to start() failed (timeout)"; return }
}
if [target_info exists gdb_stub] {
gdb_expect 60 {
# specially--if it uses stubs, assuming we hit
# breakpoint() and just step out of the function.
#
-proc runto_main {} {
+proc runto_main { } {
global gdb_prompt
global decimal
delete_breakpoints
- send_gdb "step\n"
- # if use stubs step out of the breakpoint() function.
- gdb_expect 120 {
- -re "main.* at .*$gdb_prompt $" {}
- -re "_start.*$gdb_prompt $" {}
- timeout { fail "single step at breakpoint() (timeout)" ; return 0 }
- }
+ gdb_step_for_stub;
+
return 1
}
+
+### Continue, and expect to hit a breakpoint.
+### Report a pass or fail, depending on whether it seems to have
+### worked. Use NAME as part of the test name; each call to
+### continue_to_breakpoint should use a NAME which is unique within
+### that test file.
+proc gdb_continue_to_breakpoint {name} {
+ global gdb_prompt
+ set full_name "continue to breakpoint: $name"
+
+ send_gdb "continue\n"
+ gdb_expect {
+ -re "Breakpoint .* at .*\r\n$gdb_prompt $" {
+ pass $full_name
+ }
+ -re ".*$gdb_prompt $" {
+ fail $full_name
+ }
+ timeout {
+ fail "$full_name (timeout)"
+ }
+ }
+}
+
+
+
+# gdb_test COMMAND PATTERN MESSAGE -- send a command to gdb; test the result.
#
-# gdb_test -- send_gdb a command to gdb and test the result.
-# Takes three parameters.
-# Parameters:
-# First one is the command to execute. If this is the null string
-# then no command is sent.
-# Second one is the pattern to match for a PASS, and must NOT include
-# the \r\n sequence immediately before the gdb prompt.
-# Third one is an optional message to be printed. If this
-# a null string "", then the pass/fail messages use the command
-# string as the message.
-# Returns:
-# 1 if the test failed,
-# 0 if the test passes,
-# -1 if there was an internal error.
+# COMMAND is the command to execute, send to GDB with send_gdb. If
+# this is the null string no command is sent.
+# PATTERN is the pattern to match for a PASS, and must NOT include
+# the \r\n sequence immediately before the gdb prompt.
+# MESSAGE is an optional message to be printed. If this is
+# omitted, then the pass/fail messages use the command string as the
+# message. (If this is the empty string, then sometimes we don't
+# call pass or fail at all; I don't understand this at all.)
#
+# Returns:
+# 1 if the test failed,
+# 0 if the test passes,
+# -1 if there was an internal error.
+#
proc gdb_test { args } {
global verbose
global gdb_prompt
}
set result -1
- if ![string match $command ""] {
- if { [send_gdb "$command\n"] != "" } {
- global suppress_flag;
+ set string "${command}\n";
+ if { $command != "" } {
+ while { "$string" != "" } {
+ set foo [string first "\n" "$string"];
+ set len [string length "$string"];
+ if { $foo < [expr $len - 1] } {
+ set str [string range "$string" 0 $foo];
+ if { [send_gdb "$str"] != "" } {
+ global suppress_flag;
+
+ if { ! $suppress_flag } {
+ perror "Couldn't send $command to GDB.";
+ }
+ fail "$message";
+ return $result;
+ }
+ # since we're checking if each line of the multi-line
+ # command are 'accepted' by GDB here,
+ # we need to set -notransfer expect option so that
+ # command output is not lost for pattern matching
+ # - guo
+ gdb_expect -notransfer 2 {
+ -re "\[\r\n\]" { }
+ timeout { }
+ }
+ set string [string range "$string" [expr $foo + 1] end];
+ } else {
+ break;
+ }
+ }
+ if { "$string" != "" } {
+ if { [send_gdb "$string"] != "" } {
+ global suppress_flag;
- if { ! $suppress_flag } {
- perror "Couldn't send $command to GDB.";
+ if { ! $suppress_flag } {
+ perror "Couldn't send $command to GDB.";
+ }
+ fail "$message";
+ return $result;
}
- fail "$message";
- return $result;
}
}
- gdb_expect 600 {
- -re "Ending remote debugging.*$gdb_prompt$" {
+ if [info exists timeout] {
+ set tmt $timeout;
+ } else {
+ global timeout;
+ if [info exists timeout] {
+ set tmt $timeout;
+ } else {
+ set tmt 60;
+ }
+ }
+ gdb_expect $tmt {
+ -re "\\*\\*\\* DOSEXIT code.*" {
+ if { $message != "" } {
+ fail "$message";
+ }
+ gdb_suppress_entire_file "GDB died";
+ return -1;
+ }
+ -re "Ending remote debugging.*$gdb_prompt $" {
if ![isnative] then {
warning "Can`t communicate to remote target."
}
send_gdb "$response_string\n";
exp_continue;
}
- -re "Undefined command:.*$gdb_prompt" {
+ -re "Undefined\[a-z\]* command:.*$gdb_prompt $" {
perror "Undefined command \"$command\"."
+ fail "$message"
set result 1
}
-re "Ambiguous command.*$gdb_prompt $" {
perror "\"$command\" is not a unique command name."
+ fail "$message"
set result 1
}
-re "Program exited with code \[0-9\]+.*$gdb_prompt $" {
"<return>" {
send_gdb "\n"
perror "Window too small."
+ fail "$message"
}
-re "\\(y or n\\) " {
send_gdb "n\n"
perror "Got interactive prompt."
+ fail "$message"
}
eof {
perror "Process no longer exists"
}
full_buffer {
perror "internal buffer is full."
+ fail "$message"
}
timeout {
if ![string match "" $message] then {
verbose "Quitting $GDB $GDBFLAGS"
- if [is_remote host] {
+ if { [is_remote host] && [board_info host exists fileid] } {
send_gdb "quit\n";
gdb_expect 10 {
- -re "and kill it.*y or n. " {
+ -re "y or n" {
send_gdb "y\n";
exp_continue;
}
- timeout { }
+ -re "DOSEXIT code" { }
+ default { }
}
}
- remote_close host;
+ if ![is_remote host] {
+ remote_close host;
+ }
unset gdb_spawn_id
}
return 0;
}
- if [is_remote host] {
- set res [remote_spawn host "$GDB -nw $GDBFLAGS --command gdbinit"];
- } else {
+ if ![is_remote host] {
if { [which $GDB] == 0 } then {
perror "$GDB does not exist."
exit 1
}
-
- set res [remote_spawn host "$GDB -nw $GDBFLAGS"];
}
+ set res [remote_spawn host "$GDB -nw $GDBFLAGS [host_info gdb_opts]"];
if { $res < 0 || $res == "" } {
perror "Spawning $GDB failed."
return 1;
return 0;
}
+# Return a 1 for configurations for which we don't even want to try to
+# test C++.
+
+proc skip_cplus_tests {} {
+ if { [istarget "d10v-*-*"] } {
+ return 1
+ }
+ if { [istarget "h8300-*-*"] } {
+ return 1
+ }
+ return 0
+}
+
# * For crosses, the CHILL runtime doesn't build because it can't find
# setjmp.h, stdio.h, etc.
# * For AIX (as of 16 Mar 95), (a) there is no language code for
return $skip_chill
}
-proc get_compiler_info {binfile} {
+# Skip all the tests in the file if you are not on an hppa running
+# hpux target.
+
+proc skip_hp_tests {} {
+ eval set skip_hp [ expr ![isnative] || ![istarget "hppa*-*-hpux*"] ]
+ verbose "Skip hp tests is $skip_hp"
+ return $skip_hp
+}
+
+proc get_compiler_info {binfile args} {
# Create and source the file that provides information about the compiler
# used to compile the test case.
+ # Compiler_type can be null or c++. If null we assume c.
global srcdir
global subdir
# These two come from compiler.c.
global signed_keyword_not_used
global gcc_compiled
- if { [gdb_compile "${srcdir}/${subdir}/compiler.c" "${binfile}.ci" preprocess {}] != "" } {
- perror "Couldn't make ${binfile}.ci file"
- return 1;
+ if {![istarget "hppa*-*-hpux*"]} {
+ if { [llength $args] > 0 } {
+ if {$args == "c++"} {
+ if { [gdb_compile "${srcdir}/lib/compiler.cc" "${binfile}.ci" preprocess {}] != "" } {
+ perror "Couldn't make ${binfile}.ci file"
+ return 1;
+ }
+ }
+ } else {
+ if { [gdb_compile "${srcdir}/lib/compiler.c" "${binfile}.ci" preprocess {}] != "" } {
+ perror "Couldn't make ${binfile}.ci file"
+ return 1;
+ }
+ }
+ } else {
+ if { [llength $args] > 0 } {
+ if {$args == "c++"} {
+ if { [eval gdb_preprocess \
+ [list "${srcdir}/lib/compiler.cc" "${binfile}.ci"] \
+ $args] != "" } {
+ perror "Couldn't make ${binfile}.ci file"
+ return 1;
+ }
+ }
+ } elseif { $args != "f77" } {
+ if { [eval gdb_preprocess \
+ [list "${srcdir}/lib/compiler.c" "${binfile}.ci"] \
+ $args] != "" } {
+ perror "Couldn't make ${binfile}.ci file"
+ return 1;
+ }
+ }
}
- source ${binfile}.ci
+
+ uplevel \#0 { set gcc_compiled 0 }
+
+ if { [llength $args] == 0 || $args != "f77" } {
+ source ${binfile}.ci
+ }
+
+ # Most compilers will evaluate comparisons and other boolean
+ # operations to 0 or 1.
+ uplevel \#0 { set true 1 }
+ uplevel \#0 { set false 0 }
+
+ uplevel \#0 { set hp_cc_compiler 0 }
+ uplevel \#0 { set hp_aCC_compiler 0 }
+ uplevel \#0 { set hp_f77_compiler 0 }
+ uplevel \#0 { set hp_f90_compiler 0 }
+ if { !$gcc_compiled && [istarget "hppa*-*-hpux*"] } {
+ # Check for the HP compilers
+ set compiler [lindex [split [get_compiler $args] " "] 0]
+ catch "exec what $compiler" output
+ if [regexp ".*HP aC\\+\\+.*" $output] {
+ uplevel \#0 { set hp_aCC_compiler 1 }
+ # Use of aCC results in boolean results being displayed as
+ # "true" or "false"
+ uplevel \#0 { set true true }
+ uplevel \#0 { set false false }
+ } elseif [regexp ".*HP C Compiler.*" $output] {
+ uplevel \#0 { set hp_cc_compiler 1 }
+ } elseif [regexp ".*HP-UX f77.*" $output] {
+ uplevel \#0 { set hp_f77_compiler 1 }
+ } elseif [regexp ".*HP-UX f90.*" $output] {
+ uplevel \#0 { set hp_f90_compiler 1 }
+ }
+ }
+
return 0;
}
+proc get_compiler {args} {
+ global CC CC_FOR_TARGET CXX CXX_FOR_TARGET F77_FOR_TARGET
+
+ if { [llength $args] == 0
+ || ([llength $args] == 1 && [lindex $args 0] == "") } {
+ set which_compiler "c"
+ } else {
+ if { $args =="c++" } {
+ set which_compiler "c++"
+ } elseif { $args =="f77" } {
+ set which_compiler "f77"
+ } else {
+ perror "Unknown compiler type supplied to gdb_preprocess"
+ return ""
+ }
+ }
+
+ if [info exists CC_FOR_TARGET] {
+ if {$which_compiler == "c"} {
+ set compiler $CC_FOR_TARGET
+ }
+ }
+
+ if [info exists CXX_FOR_TARGET] {
+ if {$which_compiler == "c++"} {
+ set compiler $CXX_FOR_TARGET
+ }
+ }
+
+ if [info exists F77_FOR_TARGET] {
+ if {$which_compiler == "f77"} {
+ set compiler $F77_FOR_TARGET
+ }
+ }
+
+ if { ![info exists compiler] } {
+ if { $which_compiler == "c" } {
+ if {[info exists CC]} {
+ set compiler $CC
+ }
+ }
+ if { $which_compiler == "c++" } {
+ if {[info exists CXX]} {
+ set compiler $CXX
+ }
+ }
+ if {![info exists compiler]} {
+ set compiler [board_info [target_info name] compiler];
+ if { $compiler == "" } {
+ perror "get_compiler: No compiler found"
+ return ""
+ }
+ }
+ }
+
+ return $compiler
+}
+
+proc gdb_preprocess {source dest args} {
+ set compiler [get_compiler "$args"]
+ if { $compiler == "" } {
+ return 1
+ }
+
+ set cmdline "$compiler -E $source > $dest"
+
+ verbose "Invoking $compiler -E $source > $dest"
+ verbose -log "Executing on local host: $cmdline" 2
+ set status [catch "exec ${cmdline}" exec_output]
+
+ set result [prune_warnings $exec_output]
+ regsub "\[\r\n\]*$" "$result" "" result;
+ regsub "^\[\r\n\]*" "$result" "" result;
+ if { $result != "" } {
+ clone_output "gdb compile failed, $result"
+ }
+ return $result;
+}
+
proc gdb_compile {source dest type options} {
global GDB_TESTCASE_OPTIONS;
lappend options "libs=[target_info gdb_stub]";
set options [concat $options2 $options]
}
+ if [target_info exists is_vxworks] {
+ set options2 { "additional_flags=-Dvxworks" }
+ lappend options "libs=[target_info gdb_stub]";
+ set options [concat $options2 $options]
+ }
if [info exists GDB_TESTCASE_OPTIONS] {
lappend options "additional_flags=$GDB_TESTCASE_OPTIONS";
}
verbose "options are $options"
verbose "source is $source $dest $type $options"
+
set result [target_compile $source $dest $type $options];
regsub "\[\r\n\]*$" "$result" "" result;
regsub "^\[\r\n\]*" "$result" "" result;
#
proc gdb_expect { args } {
+ # allow -notransfer expect flag specification,
+ # used by gdb_test routine for multi-line commands.
+ # packed with gtimeout when fed to remote_expect routine,
+ # which is a hack but due to what looks like a res and orig
+ # parsing problem in remote_expect routine (dejagnu/lib/remote.exp):
+ # what's fed into res is not removed from orig.
+ # - guo
+ if { [lindex $args 0] == "-notransfer" } {
+ set notransfer -notransfer;
+ set args [lrange $args 1 end];
+ } else {
+ set notransfer "";
+ }
+
if { [llength $args] == 2 && [lindex $args 0] != "-re" } {
set gtimeout [lindex $args 0];
set expcode [list [lindex $args 1]];
}
}
}
- set code [catch {uplevel remote_expect host $gtimeout $expcode} string];
+ global suppress_flag;
+ global remote_suppress_flag;
+ if [info exists remote_suppress_flag] {
+ set old_val $remote_suppress_flag;
+ }
+ if [info exists suppress_flag] {
+ if { $suppress_flag } {
+ set remote_suppress_flag 1;
+ }
+ }
+ set code [catch \
+ {uplevel remote_expect host "$gtimeout $notransfer" $expcode} string];
+ if [info exists old_val] {
+ set remote_suppress_flag $old_val;
+ } else {
+ if [info exists remote_suppress_flag] {
+ unset remote_suppress_flag;
+ }
+ }
if {$code == 1} {
global errorInfo errorCode;
}
}
+# gdb_expect_list MESSAGE SENTINEL LIST -- expect a sequence of outputs
+#
+# Check for long sequence of output by parts.
+# MESSAGE: is the test message to be printed with the test success/fail.
+# SENTINEL: Is the terminal pattern indicating that output has finished.
+# LIST: is the sequence of outputs to match.
+# If the sentinel is recognized early, it is considered an error.
+#
+# Returns:
+# 1 if the test failed,
+# 0 if the test passes,
+# -1 if there was an internal error.
+#
+proc gdb_expect_list {test sentinel list} {
+ global gdb_prompt
+ global suppress_flag
+ set index 0
+ set ok 1
+ if { $suppress_flag } {
+ set ok 0
+ }
+ while { ${index} < [llength ${list}] } {
+ set pattern [lindex ${list} ${index}]
+ set index [expr ${index} + 1]
+ if { ${index} == [llength ${list}] } {
+ if { ${ok} } {
+ gdb_expect {
+ -re "${pattern}${sentinel}" {
+ pass "${test}, pattern ${index} + sentinel"
+ }
+ -re "${sentinel}" {
+ fail "${test}, pattern ${index} + sentinel"
+ set ok 0
+ }
+ timeout {
+ fail "${test}, pattern ${index} + sentinel (timeout)"
+ set ok 0
+ }
+ }
+ } else {
+ unresolved "${test}, pattern ${index} + sentinel"
+ }
+ } else {
+ if { ${ok} } {
+ gdb_expect {
+ -re "${pattern}" {
+ pass "${test}, pattern ${index}"
+ }
+ -re "${sentinel}" {
+ fail "${test}, pattern ${index}"
+ set ok 0
+ }
+ timeout {
+ fail "${test}, pattern ${index} (timeout)"
+ set ok 0
+ }
+ }
+ } else {
+ unresolved "${test}, pattern ${index}"
+ }
+ }
+ }
+ if { ${ok} } {
+ return 0
+ } else {
+ return 1
+ }
+}
+
+#
+#
+proc gdb_suppress_entire_file { reason } {
+ global suppress_flag;
+
+ warning "$reason\n";
+ set suppress_flag -1;
+}
+
#
# Set suppress_flag, which will cause all subsequent calls to send_gdb and
# gdb_expect to fail immediately (until the next call to
proc gdb_suppress_tests { args } {
global suppress_flag;
+ return; # fnf - disable pending review of results where
+ # testsuite ran better without this
incr suppress_flag;
if { $suppress_flag == 1 } {
global suppress_flag;
if [info exists suppress_flag] {
- if { $suppress_flag != 0 } {
+ if { $suppress_flag > 0 } {
set suppress_flag 0;
clone_output "Tests restarted.\n";
}
}
}
+proc gdb_clear_suppressed { } {
+ global suppress_flag;
+
+ set suppress_flag 0;
+}
+
proc gdb_start { } {
default_gdb_start
}
}
proc default_gdb_init { args } {
- gdb_stop_suppressing_tests;
+ gdb_clear_suppressed;
# Uh, this is lame. Really, really, really lame. But there's this *one*
# testcase that will fail in random places if we don't increase this.
set pf_prefix "[file tail [file dirname $file]]/[file tail $file]:";
}
+ global gdb_prompt;
+ if [target_info exists gdb_prompt] {
+ set gdb_prompt [target_info gdb_prompt];
+ } else {
+ set gdb_prompt "\\(gdb\\)"
+ }
}
proc gdb_init { args } {
proc gdb_finish { } {
gdb_exit;
}
+
+global debug_format
+set debug_format "unknown"
+
+# Run the gdb command "info source" and extract the debugging format
+# information from the output and save it in debug_format.
+
+proc get_debug_format { } {
+ global gdb_prompt
+ global verbose
+ global expect_out
+ global debug_format
+
+ set debug_format "unknown"
+ send_gdb "info source\n"
+ gdb_expect 10 {
+ -re "Compiled with (.*) debugging format.\r\n$gdb_prompt $" {
+ set debug_format $expect_out(1,string)
+ verbose "debug format is $debug_format"
+ return 1;
+ }
+ -re "No current source file.\r\n$gdb_prompt $" {
+ perror "get_debug_format used when no current source file"
+ return 0;
+ }
+ -re "$gdb_prompt $" {
+ warning "couldn't check debug format (no valid response)."
+ return 1;
+ }
+ timeout {
+ warning "couldn't check debug format (timed out)."
+ return 1;
+ }
+ }
+}
+
+# Like setup_xfail, but takes the name of a debug format (DWARF 1,
+# COFF, stabs, etc). If that format matches the format that the
+# current test was compiled with, then the next test is expected to
+# fail for any target. Returns 1 if the next test or set of tests is
+# expected to fail, 0 otherwise (or if it is unknown). Must have
+# previously called get_debug_format.
+
+proc setup_xfail_format { format } {
+ global debug_format
+
+ if [string match $debug_format $format] then {
+ setup_xfail "*-*-*"
+ return 1;
+ }
+ return 0
+}
+
+proc gdb_step_for_stub { } {
+ global gdb_prompt;
+
+ if ![target_info exists gdb,use_breakpoint_for_stub] {
+ if [target_info exists gdb_stub_step_command] {
+ set command [target_info gdb_stub_step_command];
+ } else {
+ set command "step";
+ }
+ send_gdb "${command}\n";
+ set tries 0;
+ gdb_expect 60 {
+ -re "(main.* at |.*in .*start).*$gdb_prompt" {
+ return;
+ }
+ -re ".*$gdb_prompt" {
+ incr tries;
+ if { $tries == 5 } {
+ fail "stepping out of breakpoint function";
+ return;
+ }
+ send_gdb "${command}\n";
+ exp_continue;
+ }
+ default {
+ fail "stepping out of breakpoint function";
+ return;
+ }
+ }
+ }
+ send_gdb "where\n";
+ gdb_expect {
+ -re "main\[^\r\n\]*at \(\[^:]+\):\(\[0-9\]+\)" {
+ set file $expect_out(1,string);
+ set linenum [expr $expect_out(2,string) + 1];
+ set breakplace "${file}:${linenum}";
+ }
+ default {}
+ }
+ send_gdb "break ${breakplace}\n";
+ gdb_expect 60 {
+ -re "Breakpoint (\[0-9\]+) at.*$gdb_prompt" {
+ set breakpoint $expect_out(1,string);
+ }
+ -re "Breakpoint (\[0-9\]+): file.*$gdb_prompt" {
+ set breakpoint $expect_out(1,string);
+ }
+ default {}
+ }
+ send_gdb "continue\n";
+ gdb_expect 60 {
+ -re "Breakpoint ${breakpoint},.*$gdb_prompt" {
+ gdb_test "delete $breakpoint" ".*" "";
+ return;
+ }
+ default {}
+ }
+}
+
+### gdb_get_line_number TEXT [FILE]
+###
+### Search the source file FILE, and return the line number of a line
+### containing TEXT. Use this function instead of hard-coding line
+### numbers into your test script.
+###
+### Specifically, this function uses GDB's "search" command to search
+### FILE for the first line containing TEXT, and returns its line
+### number. Thus, FILE must be a source file, compiled into the
+### executable you are running. If omitted, FILE defaults to the
+### value of the global variable `srcfile'; most test scripts set
+### `srcfile' appropriately at the top anyway.
+###
+### Use this function to keep your test scripts independent of the
+### exact line numbering of the source file. Don't write:
+###
+### send_gdb "break 20"
+###
+### This means that if anyone ever edits your test's source file,
+### your test could break. Instead, put a comment like this on the
+### source file line you want to break at:
+###
+### /* breakpoint spot: frotz.exp: test name */
+###
+### and then write, in your test script (which we assume is named
+### frotz.exp):
+###
+### send_gdb "break [gdb_get_line_number "frotz.exp: test name"]\n"
+###
+### (Yes, Tcl knows how to handle the nested quotes and brackets.
+### Try this:
+### $ tclsh
+### % puts "foo [lindex "bar baz" 1]"
+### foo baz
+### %
+### Tcl is quite clever, for a little stringy language.)
+
+proc gdb_get_line_number {text {file /omitted/}} {
+ global gdb_prompt;
+ global srcfile;
+
+ if {! [string compare $file /omitted/]} {
+ set file $srcfile
+ }
+
+ set result -1;
+ gdb_test "list ${file}:1,1" ".*" ""
+ send_gdb "search ${text}\n"
+ gdb_expect {
+ -re "\[\r\n\]+(\[0-9\]+)\[ \t\].*${text}.*$gdb_prompt $" {
+ set result $expect_out(1,string)
+ }
+ -re ".*$gdb_prompt $" {
+ fail "find line number containing \"${text}\""
+ }
+ timeout {
+ fail "find line number containing \"${text}\" (timeout)"
+ }
+ }
+ return $result;
+}
+
+# gdb_continue_to_end:
+# The case where the target uses stubs has to be handled specially. If a
+# stub is used, we set a breakpoint at exit because we cannot rely on
+# exit() behavior of a remote target.
+#
+# mssg is the error message that gets printed.
+
+proc gdb_continue_to_end {mssg} {
+ if [target_info exists use_gdb_stub] {
+ if {![gdb_breakpoint "exit"]} {
+ return 0
+ }
+ gdb_test "continue" "Continuing..*Breakpoint .*exit.*" \
+ "continue until exit at $mssg"
+ } else {
+ # Continue until we exit. Should not stop again.
+ # Don't bother to check the output of the program, that may be
+ # extremely tough for some remote systems.
+ gdb_test "continue"\
+ "Continuing.\[\r\n0-9\]+Program exited normally\\..*"\
+ "continue until exit at $mssg"
+ }
+}
+
+proc rerun_to_main {} {
+ global gdb_prompt
+
+ if [target_info exists use_gdb_stub] {
+ gdb_run_cmd
+ gdb_expect {
+ -re ".*Breakpoint .*main .*$gdb_prompt $"\
+ {pass "rerun to main" ; return 0}
+ -re "$gdb_prompt $"\
+ {fail "rerun to main" ; return 0}
+ timeout {fail "(timeout) rerun to main" ; return 0}
+ }
+ } else {
+ send_gdb "run\n"
+ gdb_expect {
+ -re "Starting program.*$gdb_prompt $"\
+ {pass "rerun to main" ; return 0}
+ -re "$gdb_prompt $"\
+ {fail "rerun to main" ; return 0}
+ timeout {fail "(timeout) rerun to main" ; return 0}
+ }
+ }
+}
+
+# From dejagnu:
+# srcdir = testsuite src dir (e.g., devo/gdb/testsuite)
+# objdir = testsuite obj dir (e.g., gdb/testsuite)
+# subdir = subdir of testsuite (e.g., gdb.gdbtk)
+#
+# To gdbtk:
+# env(DEFS)=the "defs" files (e.g., devo/gdb/testsuite/gdb.gdbtk/defs)
+# env(SRCDIR)=directory containing the test code (e.g., *.test)
+# env(OBJDIR)=directory which contains any executables
+# (e.g., gdb/testsuite/gdb.gdbtk)
+proc gdbtk_start {test} {
+ global verbose
+ global GDB
+ global GDBFLAGS
+ global env srcdir subdir objdir
+
+ gdb_stop_suppressing_tests;
+
+ verbose "Starting $GDB -nx -q --tclcommand=$test"
+
+ set real_test [which $test]
+ if {$real_test == 0} {
+ perror "$test is not found"
+ exit 1
+ }
+
+ if {![is_remote host]} {
+ if { [which $GDB] == 0 } {
+ perror "$GDB does not exist."
+ exit 1
+ }
+ }
+
+
+ set wd [pwd]
+ cd $srcdir
+ set abs_srcdir [pwd]
+ cd [file join $abs_srcdir .. gdbtk library]
+ set env(GDBTK_LIBRARY) [pwd]
+ cd [file join $abs_srcdir .. .. tcl library]
+ set env(TCL_LIBRARY) [pwd]
+ cd [file join $abs_srcdir .. .. tk library]
+ set env(TK_LIBRARY) [pwd]
+ cd [file join $abs_srcdir .. .. tix library]
+ set env(TIX_LIBRARY) [pwd]
+ cd [file join $abs_srcdir .. .. itcl itcl library]
+ set env(ITCL_LIBRARY) [pwd]
+ cd [file join .. $abs_srcdir .. .. libgui library]
+ set env(CYGNUS_GUI_LIBRARY) [pwd]
+ cd $wd
+ cd [file join $abs_srcdir $subdir]
+ set env(DEFS) [file join [pwd] defs]
+ cd $wd
+ cd [file join $objdir $subdir]
+ set env(OBJDIR) [pwd]
+ cd $wd
+
+ set env(SRCDIR) $abs_srcdir
+ set env(GDBTK_VERBOSE) 1
+ set env(GDBTK_LOGFILE) [file join $objdir gdb.log]
+ set env(GDBTK_TEST_RUNNING) 1
+ set err [catch {exec $GDB -nx -q --tclcommand=$test} res]
+ if { $err } {
+ perror "Execing $GDB failed: $res"
+ exit 1;
+ }
+ return $res
+}
+
+# gdbtk tests call this function to print out the results of the
+# tests. The argument is a proper list of lists of the form:
+# {status name description msg}. All of these things typically
+# come from the testsuite harness.
+proc gdbtk_analyze_results {results} {
+ foreach test $results {
+ set status [lindex $test 0]
+ set name [lindex $test 1]
+ set description [lindex $test 2]
+ set msg [lindex $test 3]
+
+ switch $status {
+ PASS {
+ pass "$description ($name)"
+ }
+
+ FAIL {
+ fail "$description ($name)"
+ }
+
+ ERROR {
+ perror "$name"
+ }
+
+ XFAIL {
+ xfail "$description ($name)"
+ }
+
+ XPASS {
+ xpass "$description ($name)"
+ }
+ }
+ }
+}
+
+# Print a message and return true if a test should be skipped
+# due to lack of floating point suport.
+
+proc gdb_skip_float_test { msg } {
+ if [target_info exists gdb,skip_float_tests] {
+ verbose "Skipping test '$msg': no float tests.";
+ return 1;
+ }
+ return 0;
+}
+
+# Print a message and return true if a test should be skipped
+# due to lack of stdio support.
+
+proc gdb_skip_stdio_test { msg } {
+ if [target_info exists gdb,noinferiorio] {
+ verbose "Skipping test '$msg': no inferior i/o.";
+ return 1;
+ }
+ return 0;
+}
+
+proc gdb_skip_bogus_test { msg } {
+ return 0;
+}
+
projects / deliverable / binutils-gdb.git / blobdiff