-# Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2007, 2008, 2009, 2010, 2011
-# Free Software Foundation, Inc.
+# Copyright 1992-2013 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
}
verbose "using GDBFLAGS = $GDBFLAGS" 2
+# Make the build data directory available to tests.
+set BUILD_DATA_DIRECTORY "[pwd]/../data-directory"
+
# INTERNAL_GDBFLAGS contains flags that the testsuite requires.
global INTERNAL_GDBFLAGS
if ![info exists INTERNAL_GDBFLAGS] {
- set INTERNAL_GDBFLAGS "-nw -nx -data-directory [pwd]/../data-directory"
+ set INTERNAL_GDBFLAGS "-nw -nx -data-directory $BUILD_DATA_DIRECTORY"
}
# The variable gdb_prompt is a regexp which matches the gdb prompt.
}
proc gdb_version { } {
- return [default_gdb_version];
+ return [default_gdb_version]
}
#
# gdb_unload -- unload a file if one is loaded
+# Return 0 on success, -1 on error.
#
proc gdb_unload {} {
}
-re "$gdb_prompt $" {}
timeout {
- perror "couldn't unload file in $GDB (timed out)."
+ perror "couldn't unload file in $GDB (timeout)."
return -1
}
}
+ return 0
}
# Many of the tests depend on setting breakpoints at various places and
}
}
-
-#
# Generic run command.
#
# The second pattern below matches up to the first newline *only*.
# Using ``.*$'' could swallow up output that we attempt to match
# elsewhere.
#
+# N.B. This function does not wait for gdb to return to the prompt,
+# that is the caller's responsibility.
+
proc gdb_run_cmd {args} {
- global gdb_prompt
+ global gdb_prompt use_gdb_stub
if [target_info exists gdb_init_command] {
send_gdb "[target_info gdb_init_command]\n";
}
}
- if [target_info exists use_gdb_stub] {
+ if $use_gdb_stub {
if [target_info exists gdb,do_reload_on_run] {
if { [gdb_reload] != 0 } {
return;
}
}
}
- if [target_info exists gdb_stub] {
- gdb_expect 60 {
- -re "$gdb_prompt $" {
- send_gdb "continue\n"
- }
- }
- }
return
}
# Generic start command. Return 0 if we could start the program, -1
# if we could not.
+#
+# N.B. This function does not wait for gdb to return to the prompt,
+# that is the caller's responsibility.
proc gdb_start_cmd {args} {
- global gdb_prompt
+ global gdb_prompt use_gdb_stub
if [target_info exists gdb_init_command] {
send_gdb "[target_info gdb_init_command]\n";
-re "$gdb_prompt $" { }
default {
perror "gdb_init_command for target failed";
- return;
+ return -1
}
}
}
- if [target_info exists use_gdb_stub] {
+ if $use_gdb_stub {
return -1
}
# Set a breakpoint at FUNCTION. If there is an additional argument it is
# a list of options; the supported options are allow-pending, temporary,
-# and no-message.
+# message, no-message, and passfail.
+# The result is 1 for success, 0 for failure.
+#
+# Note: The handling of message vs no-message is messed up, but it's based
+# on historical usage. By default this function does not print passes,
+# only fails.
+# no-message: turns off printing of fails (and passes, but they're already off)
+# message: turns on printing of passes (and fails, but they're already on)
proc gdb_breakpoint { function args } {
global gdb_prompt
global decimal
set pending_response n
- if {[lsearch -exact [lindex $args 0] allow-pending] != -1} {
+ if {[lsearch -exact $args allow-pending] != -1} {
set pending_response y
}
set break_command "break"
set break_message "Breakpoint"
- if {[lsearch -exact [lindex $args 0] temporary] != -1} {
+ if {[lsearch -exact $args temporary] != -1} {
set break_command "tbreak"
set break_message "Temporary breakpoint"
}
- set no_message 0
- if {[lsearch -exact [lindex $args 0] no-message] != -1} {
- set no_message 1
+ set print_pass 0
+ set print_fail 1
+ set no_message_loc [lsearch -exact $args no-message]
+ set message_loc [lsearch -exact $args message]
+ # The last one to appear in args wins.
+ if { $no_message_loc > $message_loc } {
+ set print_fail 0
+ } elseif { $message_loc > $no_message_loc } {
+ set print_pass 1
}
+ set test_name "setting breakpoint at $function"
+
send_gdb "$break_command $function\n"
# The first two regexps are what we get with -g, the third is without -g.
gdb_expect 30 {
-re "$break_message \[0-9\]* at .*$gdb_prompt $" {}
-re "$break_message \[0-9\]* \\(.*\\) pending.*$gdb_prompt $" {
if {$pending_response == "n"} {
- if { $no_message == 0 } {
- fail "setting breakpoint at $function"
+ if { $print_fail } {
+ fail $test_name
}
return 0
}
exp_continue
}
-re "A problem internal to GDB has been detected" {
- fail "setting breakpoint at $function in runto (GDB internal error)"
+ if { $print_fail } {
+ fail "$test_name (GDB internal error)"
+ }
gdb_internal_error_resync
return 0
}
-re "$gdb_prompt $" {
- if { $no_message == 0 } {
- fail "setting breakpoint at $function"
+ if { $print_fail } {
+ fail $test_name
+ }
+ return 0
+ }
+ eof {
+ if { $print_fail } {
+ fail "$test_name (eof)"
}
return 0
}
timeout {
- if { $no_message == 0 } {
- fail "setting breakpoint at $function (timeout)"
+ if { $print_fail } {
+ fail "$test_name (timeout)"
}
return 0
}
}
- return 1;
+ if { $print_pass } {
+ pass $test_name
+ }
+ return 1
}
# Set breakpoint at function and run gdb until it breaks there.
# Since this is the only breakpoint that will be set, if it stops
# at a breakpoint, we will assume it is the one we want. We can't
# just compare to "function" because it might be a fully qualified,
-# single quoted C++ function specifier. If there's an additional argument,
-# pass it to gdb_breakpoint.
+# single quoted C++ function specifier.
+#
+# If there are additional arguments, pass them to gdb_breakpoint.
+# We recognize no-message/message ourselves.
+# The default is no-message.
+# no-message is messed up here, like gdb_breakpoint: to preserve
+# historical usage fails are always printed by default.
+# no-message: turns off printing of fails (and passes, but they're already off)
+# message: turns on printing of passes (and fails, but they're already on)
proc runto { function args } {
global gdb_prompt
delete_breakpoints
- if ![gdb_breakpoint $function [lindex $args 0]] {
- return 0;
+ # Default to "no-message".
+ set args "no-message $args"
+
+ set print_pass 0
+ set print_fail 1
+ set no_message_loc [lsearch -exact $args no-message]
+ set message_loc [lsearch -exact $args message]
+ # The last one to appear in args wins.
+ if { $no_message_loc > $message_loc } {
+ set print_fail 0
+ } elseif { $message_loc > $no_message_loc } {
+ set print_pass 1
+ }
+
+ set test_name "running to $function in runto"
+
+ # We need to use eval here to pass our varargs args to gdb_breakpoint
+ # which is also a varargs function.
+ # But we also have to be careful because $function may have multiple
+ # elements, and we don't want Tcl to move the remaining elements after
+ # the first to $args. That is why $function is wrapped in {}.
+ if ![eval gdb_breakpoint {$function} $args] {
+ return 0
}
gdb_run_cmd
# the "in func" output we get without -g.
gdb_expect 30 {
-re "Break.* at .*:$decimal.*$gdb_prompt $" {
+ if { $print_pass } {
+ pass $test_name
+ }
return 1
}
-re "Breakpoint \[0-9\]*, \[0-9xa-f\]* in .*$gdb_prompt $" {
+ if { $print_pass } {
+ pass $test_name
+ }
return 1
}
-re "The target does not support running in non-stop mode.\r\n$gdb_prompt $" {
- unsupported "Non-stop mode not supported"
+ if { $print_fail } {
+ unsupported "Non-stop mode not supported"
+ }
return 0
}
-re ".*A problem internal to GDB has been detected" {
- fail "running to $function in runto (GDB internal error)"
+ if { $print_fail } {
+ fail "$test_name (GDB internal error)"
+ }
gdb_internal_error_resync
return 0
}
-re "$gdb_prompt $" {
- fail "running to $function in runto"
+ if { $print_fail } {
+ fail $test_name
+ }
return 0
}
eof {
- fail "running to $function in runto (end of file)"
+ if { $print_fail } {
+ fail "$test_name (eof)"
+ }
return 0
}
timeout {
- fail "running to $function in runto (timeout)"
+ if { $print_fail } {
+ fail "$test_name (timeout)"
+ }
return 0
}
}
+ if { $print_pass } {
+ pass $test_name
+ }
return 1
}
+# Ask gdb to run until we hit a breakpoint at main.
#
-# runto_main -- ask gdb to run until we hit a breakpoint at main.
-# The case where the target uses stubs has to be handled
-# specially--if it uses stubs, assuming we hit
-# breakpoint() and just step out of the function.
-#
-proc runto_main { } {
- global gdb_prompt
- global decimal
-
- if ![target_info exists gdb_stub] {
- return [runto main]
- }
-
- delete_breakpoints
+# N.B. This function deletes all existing breakpoints.
+# If you don't want that, use gdb_start_cmd.
- gdb_step_for_stub;
-
- return 1
+proc runto_main { } {
+ return [runto main no-message]
}
-
### Continue, and expect to hit a breakpoint.
### Report a pass or fail, depending on whether it seems to have
### worked. Use NAME as part of the test name; each call to
send_gdb "continue\n"
gdb_expect {
- -re "Breakpoint .* (at|in) $location_pattern\r\n$gdb_prompt $" {
+ -re "(?:Breakpoint|Temporary breakpoint) .* (at|in) $location_pattern\r\n$gdb_prompt $" {
pass $full_name
}
-re ".*$gdb_prompt $" {
proc gdb_internal_error_resync {} {
global gdb_prompt
+ verbose -log "Resyncing due to internal error."
+
set count 0
while {$count < 10} {
gdb_expect {
# ...", all being implicitly appended to that list.
#
proc gdb_test_multiple { command message user_code } {
- global verbose
+ global verbose use_gdb_stub
global gdb_prompt
global GDB
global inferior_exited_re
error "Invalid newline in \"$message\" test"
}
+ if {$use_gdb_stub
+ && [regexp -nocase {^\s*(r|run|star|start|at|att|atta|attac|attach)\M} \
+ $command]} {
+ error "gdbserver does not support $command without extended-remote"
+ }
+
# TCL/EXPECT WART ALERT
# Expect does something very strange when it receives a single braced
# argument. It splits it along word separators and performs substitutions.
set result -1
set string "${command}\n";
if { $command != "" } {
+ set multi_line_re "\[\r\n\] *>"
while { "$string" != "" } {
set foo [string first "\n" "$string"];
set len [string length "$string"];
perror "Couldn't send $command to GDB.";
}
fail "$message";
- return $result;
+ return $result
}
# since we're checking if each line of the multi-line
# command are 'accepted' by GDB here,
# command output is not lost for pattern matching
# - guo
gdb_expect 2 {
- -notransfer -re "\[\r\n\]" { verbose "partial: match" 3 }
+ -notransfer -re "$multi_line_re$" { verbose "partial: match" 3 }
timeout { verbose "partial: timeout" 3 }
}
set string [string range "$string" [expr $foo + 1] end];
+ set multi_line_re "$multi_line_re.*\[\r\n\] *>"
} else {
break;
}
perror "Couldn't send $command to GDB.";
}
fail "$message";
- return $result;
+ return $result
}
}
}
}
set code {
- -re ".*A problem internal to GDB has been detected" {
- fail "$message (GDB internal error)"
- gdb_internal_error_resync
- }
- -re "\\*\\*\\* DOSEXIT code.*" {
- if { $message != "" } {
- fail "$message";
- }
- gdb_suppress_entire_file "GDB died";
- set result -1;
- }
+ -re ".*A problem internal to GDB has been detected" {
+ fail "$message (GDB internal error)"
+ gdb_internal_error_resync
+ }
+ -re "\\*\\*\\* DOSEXIT code.*" {
+ if { $message != "" } {
+ fail "$message";
+ }
+ gdb_suppress_entire_file "GDB died";
+ set result -1;
+ }
}
append code $processed_code
append code {
- -re "Ending remote debugging.*$gdb_prompt $" {
+ -re "Ending remote debugging.*$gdb_prompt $" {
if ![isnative] then {
warning "Can`t communicate to remote target."
}
gdb_start
set result -1
}
- -re "Undefined\[a-z\]* command:.*$gdb_prompt $" {
+ -re "Undefined\[a-z\]* command:.*$gdb_prompt $" {
perror "Undefined command \"$command\"."
- fail "$message"
+ fail "$message"
set result 1
}
- -re "Ambiguous command.*$gdb_prompt $" {
+ -re "Ambiguous command.*$gdb_prompt $" {
perror "\"$command\" is not a unique command name."
- fail "$message"
+ fail "$message"
set result 1
}
- -re "$inferior_exited_re with code \[0-9\]+.*$gdb_prompt $" {
+ -re "$inferior_exited_re with code \[0-9\]+.*$gdb_prompt $" {
if ![string match "" $message] then {
set errmsg "$message (the program exited)"
} else {
fail "$errmsg"
set result -1
}
- -re "$inferior_exited_re normally.*$gdb_prompt $" {
+ -re "$inferior_exited_re normally.*$gdb_prompt $" {
if ![string match "" $message] then {
set errmsg "$message (the program exited)"
} else {
fail "$errmsg"
set result -1
}
- -re "The program is not being run.*$gdb_prompt $" {
+ -re "The program is not being run.*$gdb_prompt $" {
if ![string match "" $message] then {
set errmsg "$message (the program is no longer running)"
} else {
fail "$errmsg"
set result -1
}
- -re "\r\n$gdb_prompt $" {
+ -re "\r\n$gdb_prompt $" {
if ![string match "" $message] then {
fail "$message"
}
set result 1
}
- "<return>" {
+ "<return>" {
send_gdb "\n"
perror "Window too small."
- fail "$message"
+ fail "$message"
set result -1
}
-re "\\((y or n|y or \\\[n\\\]|\\\[y\\\] or n)\\) " {
fail "$message (got breakpoint menu)"
set result -1
}
- eof {
- perror "Process no longer exists"
- if { $message != "" } {
- fail "$message"
- }
- return -1
+ eof {
+ perror "Process no longer exists"
+ if { $message != "" } {
+ fail "$message"
+ }
+ return -1
}
- full_buffer {
+ full_buffer {
perror "internal buffer is full."
- fail "$message"
+ fail "$message"
set result -1
}
timeout {
if {$code == 1} {
global errorInfo errorCode;
return -code error -errorinfo $errorInfo -errorcode $errorCode $string
- } elseif {$code == 2} {
- return -code return $string
- } elseif {$code == 3} {
- return
- } elseif {$code > 4} {
+ } elseif {$code > 1} {
return -code $code $string
}
return $result
global gdb_prompt
if [is_remote host] {
- return "";
+ return ""
}
send_gdb "dir\n"
gdb_expect 60 {
#
# debug file was loaded successfully and has debug information
# nodebug file was loaded successfully and has no debug information
+# lzma file was loaded, .gnu_debugdata found, but no LZMA support
+# compiled in
# fail file was not loaded
#
# I tried returning this information as part of the return value,
global GDB
global last_loaded_file
+ # Save this for the benefit of gdbserver-support.exp.
set last_loaded_file $arg
# Set whether debug info was found.
send_gdb "file $arg\n"
gdb_expect 120 {
+ -re "Reading symbols from.*LZMA support was disabled.*done.*$gdb_prompt $" {
+ verbose "\t\tLoaded $arg into $GDB; .gnu_debugdata found but no LZMA available"
+ set gdb_file_cmd_debug_info "lzma"
+ return 0
+ }
-re "Reading symbols from.*no debugging symbols found.*done.*$gdb_prompt $" {
- verbose "\t\tLoaded $arg into the $GDB with no debugging symbols"
+ verbose "\t\tLoaded $arg into $GDB with no debugging symbols"
set gdb_file_cmd_debug_info "nodebug"
return 0
}
-re "Reading symbols from.*done.*$gdb_prompt $" {
- verbose "\t\tLoaded $arg into the $GDB"
+ verbose "\t\tLoaded $arg into $GDB"
set gdb_file_cmd_debug_info "debug"
return 0
}
return 0
}
timeout {
- perror "(timeout) Couldn't load $arg, other program already loaded."
+ perror "Couldn't load $arg, other program already loaded (timeout)."
return -1
}
+ eof {
+ perror "Couldn't load $arg, other program already loaded (eof)."
+ return -1
+ }
}
}
-re "No such file or directory.*$gdb_prompt $" {
perror "($arg) No such file or directory"
return -1
}
+ -re "A problem internal to GDB has been detected" {
+ fail "($arg) (GDB internal error)"
+ gdb_internal_error_resync
+ return -1
+ }
-re "$gdb_prompt $" {
- perror "couldn't load $arg into $GDB."
+ perror "Couldn't load $arg into $GDB."
return -1
}
timeout {
- perror "couldn't load $arg into $GDB (timed out)."
+ perror "Couldn't load $arg into $GDB (timeout)."
return -1
}
eof {
# This is an attempt to detect a core dump, but seems not to
# work. Perhaps we need to match .* followed by eof, in which
# gdb_expect does not seem to have a way to do that.
- perror "couldn't load $arg into $GDB (end of file)."
+ perror "Couldn't load $arg into $GDB (eof)."
return -1
}
}
# get really slow. Give gdb at least 3 minutes to start up.
#
proc default_gdb_start { } {
- global verbose
+ global verbose use_gdb_stub
global GDB
global INTERNAL_GDBFLAGS GDBFLAGS
global gdb_prompt
gdb_stop_suppressing_tests;
+ # Set the default value, it may be overriden later by specific testfile.
+ #
+ # Use `set_board_info use_gdb_stub' for the board file to flag the inferior
+ # is already started after connecting and run/attach are not supported.
+ # This is used for the "remote" protocol. After GDB starts you should
+ # check global $use_gdb_stub instead of the board as the testfile may force
+ # a specific different target protocol itself.
+ set use_gdb_stub [target_info exists use_gdb_stub]
+
verbose "Spawning $GDB $INTERNAL_GDBFLAGS $GDBFLAGS"
if [info exists gdb_spawn_id] {
- return 0;
+ return 0
}
if ![is_remote host] {
set res [remote_spawn host "$GDB $INTERNAL_GDBFLAGS $GDBFLAGS [host_info gdb_opts]"];
if { $res < 0 || $res == "" } {
perror "Spawning $GDB failed."
- return 1;
+ return 1
}
gdb_expect 360 {
-re "\[\r\n\]$gdb_prompt $" {
warning "Couldn't set the width to 0."
}
}
- return 0;
+ return 0
}
# Examine the output of compilation to determine whether compilation
return 0
}
+# Return a 1 if I don't even want to try to test GO.
+
+proc skip_go_tests {} {
+ return 0
+}
+
# Return a 1 if I don't even want to try to test java.
proc skip_java_tests {} {
proc skip_python_tests {} {
global gdb_prompt
- gdb_test_multiple "python print 'test'" "verify python support" {
+ global gdb_py_is_py3k
+ global gdb_py_is_py24
+
+ gdb_test_multiple "python print ('test')" "verify python support" {
-re "not supported.*$gdb_prompt $" {
unsupported "Python support is disabled."
return 1
-re "$gdb_prompt $" {}
}
+ set gdb_py_is_py24 0
+ gdb_test_multiple "python print (sys.version_info\[0\])" "check if python 3" {
+ -re "3.*$gdb_prompt $" {
+ set gdb_py_is_py3k 1
+ }
+ -re ".*$gdb_prompt $" {
+ set gdb_py_is_py3k 0
+ }
+ }
+ if { $gdb_py_is_py3k == 0 } {
+ gdb_test_multiple "python print (sys.version_info\[1\])" "check if python 2.4" {
+ -re "\[45\].*$gdb_prompt $" {
+ set gdb_py_is_py24 1
+ }
+ -re ".*$gdb_prompt $" {
+ set gdb_py_is_py24 0
+ }
+ }
+ }
+
return 0
}
return 1
}
+# Test files shall make sure all the test result lines in gdb.sum are
+# unique in a test run, so that comparing the gdb.sum files of two
+# test runs gives correct results. Test files that exercise
+# variations of the same tests more than once, shall prefix the
+# different test invocations with different identifying strings in
+# order to make them unique.
+#
+# About test prefixes:
+#
+# $pf_prefix is the string that dejagnu prints after the result (FAIL,
+# PASS, etc.), and before the test message/name in gdb.sum. E.g., the
+# underlined substring in
+#
+# PASS: gdb.base/mytest.exp: some test
+# ^^^^^^^^^^^^^^^^^^^^
+#
+# is $pf_prefix.
+#
+# The easiest way to adjust the test prefix is to append a test
+# variation prefix to the $pf_prefix, using the with_test_prefix
+# procedure. E.g.,
+#
+# proc do_tests {} {
+# gdb_test ... ... "test foo"
+# gdb_test ... ... "test bar"
+#
+# with_test_prefix "subvariation a" {
+# gdb_test ... ... "test x"
+# }
+#
+# with_test_prefix "subvariation b" {
+# gdb_test ... ... "test x"
+# }
+# }
+#
+# with_test_prefix "variation1" {
+# ...do setup for variation 1...
+# do_tests
+# }
+#
+# with_test_prefix "variation2" {
+# ...do setup for variation 2...
+# do_tests
+# }
+#
+# Results in:
+#
+# PASS: gdb.base/mytest.exp: variation1: test foo
+# PASS: gdb.base/mytest.exp: variation1: test bar
+# PASS: gdb.base/mytest.exp: variation1: subvariation a: test x
+# PASS: gdb.base/mytest.exp: variation1: subvariation b: test x
+# PASS: gdb.base/mytest.exp: variation2: test foo
+# PASS: gdb.base/mytest.exp: variation2: test bar
+# PASS: gdb.base/mytest.exp: variation2: subvariation a: test x
+# PASS: gdb.base/mytest.exp: variation2: subvariation b: test x
+#
+# If for some reason more flexibility is necessary, one can also
+# manipulate the pf_prefix global directly, treating it as a string.
+# E.g.,
+#
+# global pf_prefix
+# set saved_pf_prefix
+# append pf_prefix "${foo}: bar"
+# ... actual tests ...
+# set pf_prefix $saved_pf_prefix
+#
+
+# Run BODY in the context of the caller, with the current test prefix
+# (pf_prefix) appended with one space, then PREFIX, and then a colon.
+# Returns the result of BODY.
+#
+proc with_test_prefix { prefix body } {
+ global pf_prefix
+
+ set saved $pf_prefix
+ append pf_prefix " " $prefix ":"
+ set code [catch {uplevel 1 $body} result]
+ set pf_prefix $saved
+
+ if {$code == 1} {
+ global errorInfo errorCode
+ return -code $code -errorinfo $errorInfo -errorcode $errorCode $result
+ } else {
+ return -code $code $result
+ }
+}
+
# Return 1 if _Complex types are supported, otherwise, return 0.
proc support_complex_tests {} {
return $support_complex_tests_saved
}
+# Return 1 if target hardware or OS supports single stepping to signal
+# handler, otherwise, return 0.
+
+proc can_single_step_to_signal_handler {} {
+
+ # Targets don't have hardware single step. On these targets, when
+ # a signal is delivered during software single step, gdb is unable
+ # to determine the next instruction addresses, because start of signal
+ # handler is one of them.
+ if { [istarget "arm*-*-*"] || [istarget "mips*-*-*"]
+ || [istarget "tic6x-*-*"] || [istarget "sparc*-*-linux*"] } {
+ return 0
+ }
+
+ return 1
+}
+
+# Return 1 if target supports process record, otherwise return 0.
+
+proc supports_process_record {} {
+
+ if [target_info exists gdb,use_precord] {
+ return [target_info gdb,use_precord]
+ }
+
+ if { [istarget "x86_64-*-linux*"] || [istarget "i\[34567\]86-*-linux*"] } {
+ return 1
+ }
+
+ return 0
+}
+
+# Return 1 if target supports reverse debugging, otherwise return 0.
+
+proc supports_reverse {} {
+
+ if [target_info exists gdb,can_reverse] {
+ return [target_info gdb,can_reverse]
+ }
+
+ if { [istarget "x86_64-*-linux*"] || [istarget "i\[34567\]86-*-linux*"] } {
+ return 1
+ }
+
+ return 0
+}
+
# Return 1 if target is ILP32.
# This cannot be decided simply from looking at the target string,
# as it might depend on externally passed compiler options like -m64.
return [set is_lp64_target_saved($board) 1]
}
+# Return 1 if target has x86_64 registers - either amd64 or x32.
+# x32 target identifies as x86_64-*-linux*, therefore it cannot be determined
+# just from the target string.
+proc is_amd64_regs_target {} {
+ global is_amd64_regs_target_saved
+
+ if {![istarget "x86_64-*-*"] && ![istarget "i?86-*"]} {
+ return 0
+ }
+
+ # Use the cached value, if it exists. Cache value per "board" to handle
+ # runs with multiple options (e.g. unix/{-m32,-64}) correctly.
+ set me "is_amd64_regs_target"
+ set board [target_info name]
+ if [info exists is_amd64_regs_target_saved($board)] {
+ verbose "$me: returning saved $is_amd64_regs_target_saved($board)" 2
+ return $is_amd64_regs_target_saved($board)
+ }
+
+ set src reg64[pid].s
+ set obj reg64[pid].o
+
+ set f [open $src "w"]
+ foreach reg \
+ {rax rbx rcx rdx rsi rdi rbp rsp r8 r9 r10 r11 r12 r13 r14 r15} {
+ puts $f "\tincq %$reg"
+ }
+ close $f
+
+ verbose "$me: compiling testfile $src" 2
+ set lines [gdb_compile $src $obj object {quiet}]
+ file delete $src
+ file delete $obj
+
+ if ![string match "" $lines] then {
+ verbose "$me: testfile compilation failed, returning 0" 2
+ return [set is_amd64_regs_target_saved($board) 0]
+ }
+
+ verbose "$me: returning 1" 2
+ return [set is_amd64_regs_target_saved($board) 1]
+}
+
# Return 1 if this target is an x86 or x86-64 with -m32.
proc is_x86_like_target {} {
- if {[istarget i?86-*]} {
- return 1
- }
- if {![istarget "x86_64-*-*"]} {
+ if {![istarget "x86_64-*-*"] && ![istarget i?86-*]} {
return 0
}
- return [is_ilp32_target]
+ return [expr [is_ilp32_target] && ![is_amd64_regs_target]]
}
# Return 1 if displaced stepping is supported on target, otherwise, return 0.
# Make sure we have a compiler that understands altivec.
set compile_flags {debug nowarnings}
- if [get_compiler_info not-used] {
+ if [get_compiler_info] {
warning "Could not get compiler info"
return 1
}
# Make sure we have a compiler that understands altivec.
set compile_flags {debug nowarnings quiet}
- if [get_compiler_info not-used] {
+ if [get_compiler_info] {
warning "Could not get compiler info"
return 1
}
return $skip_vsx_tests_saved
}
+# Run a test on the target to see if it supports btrace hardware. Return 0 if so,
+# 1 if it does not. Based on 'check_vmx_hw_available' from the GCC testsuite.
+
+proc skip_btrace_tests {} {
+ global skip_btrace_tests_saved
+ global srcdir subdir gdb_prompt inferior_exited_re
+
+ # Use the cached value, if it exists.
+ set me "skip_btrace_tests"
+ if [info exists skip_btrace_tests_saved] {
+ verbose "$me: returning saved $skip_btrace_tests_saved" 2
+ return $skip_btrace_tests_saved
+ }
+
+ if { ![istarget "i?86-*-*"] && ![istarget "x86_64-*-*"] } {
+ verbose "$me: target does not support btrace, returning 1" 2
+ return [set skip_btrace_tests_saved 1]
+ }
+
+ # Set up, compile, and execute a test program.
+ # Include the current process ID in the file names to prevent conflicts
+ # with invocations for multiple testsuites.
+ set src [standard_output_file btrace[pid].c]
+ set exe [standard_output_file btrace[pid].x]
+
+ set f [open $src "w"]
+ puts $f "int main(void) { return 0; }"
+ close $f
+
+ verbose "$me: compiling testfile $src" 2
+ set compile_flags {debug nowarnings quiet}
+ set lines [gdb_compile $src $exe executable $compile_flags]
+
+ if ![string match "" $lines] then {
+ verbose "$me: testfile compilation failed, returning 1" 2
+ file delete $src
+ return [set skip_btrace_tests_saved 1]
+ }
+
+ # No error message, compilation succeeded so now run it via gdb.
+
+ clean_restart btrace[pid].x
+ if ![runto_main] {
+ file delete $src
+ return [set skip_btrace_tests_saved 1]
+ }
+ file delete $src
+ # In case of an unexpected output, we return 2 as a fail value.
+ set skip_btrace_tests_saved 2
+ gdb_test_multiple "record btrace" "check btrace support" {
+ -re "You can't do that when your target is.*\r\n$gdb_prompt $" {
+ set skip_btrace_tests_saved 1
+ }
+ -re "Target does not support branch tracing.*\r\n$gdb_prompt $" {
+ set skip_btrace_tests_saved 1
+ }
+ -re "Could not enable branch tracing.*\r\n$gdb_prompt $" {
+ set skip_btrace_tests_saved 1
+ }
+ -re "^record btrace\r\n$gdb_prompt $" {
+ set skip_btrace_tests_saved 0
+ }
+ }
+ gdb_exit
+ remote_file build delete $exe
+
+ verbose "$me: returning $skip_btrace_tests_saved" 2
+ return $skip_btrace_tests_saved
+}
+
# Skip all the tests in the file if you are not on an hppa running
# hpux target.
return 0
}
+# Return 1 if we should skip tests that require the runtime unwinder
+# hook. This must be invoked while gdb is running, after shared
+# libraries have been loaded. This is needed because otherwise a
+# shared libgcc won't be visible.
+
+proc skip_unwinder_tests {} {
+ global gdb_prompt
+
+ set ok 0
+ gdb_test_multiple "print _Unwind_DebugHook" "check for unwinder hook" {
+ -re "= .*no debug info.*_Unwind_DebugHook.*\r\n$gdb_prompt $" {
+ }
+ -re "= .*_Unwind_DebugHook.*\r\n$gdb_prompt $" {
+ set ok 1
+ }
+ -re "No symbol .* in current context.\r\n$gdb_prompt $" {
+ }
+ }
+ if {!$ok} {
+ gdb_test_multiple "info probe" "check for stap probe in unwinder" {
+ -re ".*libgcc.*unwind.*\r\n$gdb_prompt $" {
+ set ok 1
+ }
+ -re "\r\n$gdb_prompt $" {
+ }
+ }
+ }
+ return $ok
+}
+
set compiler_info "unknown"
set gcc_compiled 0
set hp_cc_compiler 0
# Figure out what compiler I am using.
#
-# BINFILE is a "compiler information" output file. This implementation
-# does not use BINFILE.
-#
-# ARGS can be empty or "C++". If empty, "C" is assumed.
+# ARG can be empty or "C++". If empty, "C" is assumed.
#
# There are several ways to do this, with various problems.
#
#
# -- chastain 2004-01-06
-proc get_compiler_info {binfile args} {
+proc get_compiler_info {{arg ""}} {
# For compiler.c and compiler.cc
global srcdir
# Choose which file to preprocess.
set ifile "${srcdir}/lib/compiler.c"
- if { [llength $args] > 0 && [lindex $args 0] == "c++" } {
+ if { $arg == "c++" } {
set ifile "${srcdir}/lib/compiler.cc"
}
# We have to use -E and -o together, despite the comments
# above, because of how DejaGnu handles remote host testing.
set ppout "$outdir/compiler.i"
- gdb_compile "${ifile}" "$ppout" preprocess [list "$args" quiet]
+ gdb_compile "${ifile}" "$ppout" preprocess [list "$arg" quiet]
set file [open $ppout r]
set cppout [read $file]
close $file
} else {
- set cppout [ gdb_compile "${ifile}" "" preprocess [list "$args" quiet] ]
+ set cppout [ gdb_compile "${ifile}" "" preprocess [list "$arg" quiet] ]
}
log_file -a "$outdir/$tool.log"
uplevel \#0 { set false false }
}
- return 0;
+ return 0
}
proc test_compiler_info { {compiler ""} } {
# dynamically load one by basename, we must specify rpath. If we
# are using a remote host, DejaGNU will link to the shared library
# using a relative path, so again we must specify an rpath.
- if { $shlib_load || ($shlib_found && [is_remote host]) } {
+ if { $shlib_load || ($shlib_found && [is_remote target]) } {
if { ([istarget "*-*-mingw*"]
|| [istarget *-*-cygwin*]
|| [istarget *-*-pe*]
|| [istarget hppa*-*-hpux*])} {
# Do not need anything.
- } elseif { [istarget *-*-openbsd*] } {
+ } elseif { [istarget *-*-freebsd*] || [istarget *-*-openbsd*] } {
lappend new_options "ldflags=-Wl,-rpath,${outdir}"
} elseif { [istarget arm*-*-symbianelf*] } {
if { $shlib_load } {
}
set options $new_options
- if [target_info exists gdb_stub] {
- set options2 { "additional_flags=-Dusestubs" }
- lappend options "libs=[target_info gdb_stub]";
- set options [concat $options2 $options]
- }
if [target_info exists is_vxworks] {
set options2 { "additional_flags=-Dvxworks" }
- lappend options "libs=[target_info gdb_stub]";
set options [concat $options2 $options]
}
if [info exists GDB_TESTCASE_OPTIONS] {
clone_output "gdb compile failed, $result"
}
}
- return $result;
+ return $result
}
|| [istarget *-*-cygwin*]
|| [istarget *-*-pe*])} {
lappend link_options "additional_flags=-Wl,--out-implib,${dest}.a"
- }
+ } elseif [is_remote target] {
+ # By default, we do not set the soname. This causes the linker
+ # on ELF systems to create a DT_NEEDED entry in the executable
+ # refering to the full path name of the library. This is a
+ # problem in remote testing if the library is in a different
+ # directory there. To fix this, we set a soname of just the
+ # base filename for the library, and add an appropriate -rpath
+ # to the main executable (in gdb_compile).
+ set destbase [file tail $dest]
+ lappend link_options "additional_flags=-Wl,-soname,$destbase"
+ }
}
if {[gdb_compile "${objects}" "${dest}" executable $link_options] != ""} {
return -1
}
}
+# This is just like gdb_compile_shlib, above, except that it tries compiling
+# against several different thread libraries, to see which one this
+# system has.
+proc gdb_compile_shlib_pthreads {sources dest options} {
+ set built_binfile 0
+ set why_msg "unrecognized error"
+ foreach lib {-lpthreads -lpthread -lthread ""} {
+ # This kind of wipes out whatever libs the caller may have
+ # set. Or maybe theirs will override ours. How infelicitous.
+ set options_with_lib [concat $options [list libs=$lib quiet]]
+ set ccout [gdb_compile_shlib $sources $dest $options_with_lib]
+ switch -regexp -- $ccout {
+ ".*no posix threads support.*" {
+ set why_msg "missing threads include file"
+ break
+ }
+ ".*cannot open -lpthread.*" {
+ set why_msg "missing runtime threads library"
+ }
+ ".*Can't find library for -lpthread.*" {
+ set why_msg "missing runtime threads library"
+ }
+ {^$} {
+ pass "successfully compiled posix threads test case"
+ set built_binfile 1
+ break
+ }
+ }
+ }
+ if {!$built_binfile} {
+ unsupported "Couldn't compile $sources: ${why_msg}"
+ return -1
+ }
+}
+
# This is just like gdb_compile_pthreads, above, except that we always add the
# objc library for compiling Objective-C programs
proc gdb_compile_objc {source dest type options} {
proc send_gdb { string } {
global suppress_flag;
if { $suppress_flag } {
- return "suppressed";
+ return "suppressed"
}
- return [remote_send host "$string"];
+ return [remote_send host "$string"]
}
#
global errorInfo errorCode;
return -code error -errorinfo $errorInfo -errorcode $errorCode $string
- } elseif {$code == 2} {
- return -code return $string
- } elseif {$code == 3} {
- return
- } elseif {$code > 4} {
+ } else {
return -code $code $string
}
}
return -1
}
+# Invoke "gcore". CORE is the name of the core file to write. TEST
+# is the name of the test case. This will return 1 if the core file
+# was created, 0 otherwise. If this fails to make a core file because
+# this configuration of gdb does not support making core files, it
+# will call "unsupported", not "fail". However, if this fails to make
+# a core file for some other reason, then it will call "fail".
+
+proc gdb_gcore_cmd {core test} {
+ global gdb_prompt
+
+ set result 0
+ gdb_test_multiple "gcore $core" $test {
+ -re "Saved corefile .*\[\r\n\]+$gdb_prompt $" {
+ pass $test
+ set result 1
+ }
+
+ -re "Undefined command.*$gdb_prompt $" {
+ unsupported $test
+ verbose -log "'gcore' command undefined in gdb_gcore_cmd"
+ }
+
+ -re "Can't create a corefile\[\r\n\]+$gdb_prompt $" {
+ unsupported $test
+ }
+ }
+
+ return $result
+}
+
# Return the filename to download to the target and load on the target
# for this shared library. Normally just LIBNAME, unless shared libraries
# for this target have separate link and load images.
proc gdb_continue { function } {
global decimal
- return [gdb_test "continue" ".*Breakpoint $decimal, $function .*" "continue to $function"];
+ return [gdb_test "continue" ".*Breakpoint $decimal, $function .*" "continue to $function"]
}
proc default_gdb_init { args } {
global gdb_wrapper_initialized
global gdb_wrapper_target
+ global gdb_test_file_name
global cleanfiles
set cleanfiles {}
gdb_clear_suppressed;
+ set gdb_test_file_name [file rootname [file tail [lindex $args 0]]]
+
# Make sure that the wrapper is rebuilt
# with the appropriate multilib option.
if { $gdb_wrapper_target != [current_target_name] } {
} else {
set gdb_prompt "\\(gdb\\)"
}
+ global use_gdb_stub
+ if [info exists use_gdb_stub] {
+ unset use_gdb_stub
+ }
+}
+
+# Turn BASENAME into a full file name in the standard output
+# directory. It is ok if BASENAME is the empty string; in this case
+# the directory is returned.
+
+proc standard_output_file {basename} {
+ global objdir subdir
+
+ return [file join $objdir $subdir $basename]
+}
+
+# Set 'testfile', 'srcfile', and 'binfile'.
+#
+# ARGS is a list of source file specifications.
+# Without any arguments, the .exp file's base name is used to
+# compute the source file name. The ".c" extension is added in this case.
+# If ARGS is not empty, each entry is a source file specification.
+# If the specification starts with a ".", it is treated as a suffix
+# to append to the .exp file's base name.
+# If the specification is the empty string, it is treated as if it
+# were ".c".
+# Otherwise it is a file name.
+# The first file in the list is used to set the 'srcfile' global.
+# Each subsequent name is used to set 'srcfile2', 'srcfile3', etc.
+#
+# Most tests should call this without arguments.
+#
+# If a completely different binary file name is needed, then it
+# should be handled in the .exp file with a suitable comment.
+
+proc standard_testfile {args} {
+ global gdb_test_file_name
+ global subdir
+ global gdb_test_file_last_vars
+
+ # Outputs.
+ global testfile binfile
+
+ set testfile $gdb_test_file_name
+ set binfile [standard_output_file ${testfile}]
+
+ if {[llength $args] == 0} {
+ set args .c
+ }
+
+ # Unset our previous output variables.
+ # This can help catch hidden bugs.
+ if {[info exists gdb_test_file_last_vars]} {
+ foreach varname $gdb_test_file_last_vars {
+ global $varname
+ catch {unset $varname}
+ }
+ }
+ # 'executable' is often set by tests.
+ set gdb_test_file_last_vars {executable}
+
+ set suffix ""
+ foreach arg $args {
+ set varname srcfile$suffix
+ global $varname
+
+ # Handle an extension.
+ if {$arg == ""} {
+ set arg $testfile.c
+ } elseif {[string range $arg 0 0] == "."} {
+ set arg $testfile$arg
+ }
+
+ set $varname $arg
+ lappend gdb_test_file_last_vars $varname
+
+ if {$suffix == ""} {
+ set suffix 2
+ } else {
+ incr suffix
+ }
+ }
}
# The default timeout used when testing GDB commands. We want to use
# an error when that happens.
set banned_variables { bug_id prms_id }
+# A list of procedures that GDB testcases should not use.
+# We try to prevent their use by monitoring invocations and raising
+# an error when that happens.
+set banned_procedures { strace }
+
# gdb_init is called by runtest at start, but also by several
# tests directly; gdb_finish is only called from within runtest after
# each test source execution.
# Placing several traces by repetitive calls to gdb_init leads
# to problems, as only one trace is removed in gdb_finish.
# To overcome this possible problem, we add a variable that records
-# if the banned variables are traced.
-set banned_variables_traced 0
+# if the banned variables and procedures are already traced.
+set banned_traced 0
proc gdb_init { args } {
# Reset the timeout value to the default. This way, any testcase
global timeout
set timeout $gdb_test_timeout
- # Block writes to all banned variables...
+ # Block writes to all banned variables, and invocation of all
+ # banned procedures...
global banned_variables
- global banned_variables_traced
- if (!$banned_variables_traced) {
+ global banned_procedures
+ global banned_traced
+ if (!$banned_traced) {
foreach banned_var $banned_variables {
global "$banned_var"
trace add variable "$banned_var" write error
}
- set banned_variables_traced 1
+ foreach banned_proc $banned_procedures {
+ global "$banned_proc"
+ trace add execution "$banned_proc" enter error
+ }
+ set banned_traced 1
}
# We set LC_ALL, LC_CTYPE, and LANG to C so that we get the same
set gdbserver_reconnect_p 1
unset gdbserver_reconnect_p
- return [eval default_gdb_init $args];
+ return [eval default_gdb_init $args]
}
proc gdb_finish { } {
# Unblock write access to the banned variables. Dejagnu typically
# resets some of them between testcases.
global banned_variables
- global banned_variables_traced
- if ($banned_variables_traced) {
+ global banned_procedures
+ global banned_traced
+ if ($banned_traced) {
foreach banned_var $banned_variables {
global "$banned_var"
trace remove variable "$banned_var" write error
}
- set banned_variables_traced 0
+ foreach banned_proc $banned_procedures {
+ global "$banned_proc"
+ trace remove execution "$banned_proc" enter error
+ }
+ set banned_traced 0
}
}
-re "Compiled with (.*) debugging format.\r\n.*$gdb_prompt $" {
set debug_format $expect_out(1,string)
verbose "debug format is $debug_format"
- return 1;
+ return 1
}
-re "No current source file.\r\n$gdb_prompt $" {
perror "get_debug_format used when no current source file"
- return 0;
+ return 0
}
-re "$gdb_prompt $" {
warning "couldn't check debug format (no valid response)."
- return 1;
+ return 1
}
timeout {
- warning "couldn't check debug format (timed out)."
- return 1;
+ warning "couldn't check debug format (timeout)."
+ return 1
}
}
}
if {$ret} then {
setup_xfail "*-*-*"
}
- return $ret;
-}
-
-# Like setup_kfail, but only call setup_kfail conditionally if
-# istarget[TARGET] returns true.
-proc setup_kfail_for_target { PR target } {
- if { [istarget $target] } {
- setup_kfail $PR $target
- }
-}
-
-proc gdb_step_for_stub { } {
- global gdb_prompt;
-
- if ![target_info exists gdb,use_breakpoint_for_stub] {
- if [target_info exists gdb_stub_step_command] {
- set command [target_info gdb_stub_step_command];
- } else {
- set command "step";
- }
- send_gdb "${command}\n";
- set tries 0;
- gdb_expect 60 {
- -re "(main.* at |.*in .*start).*$gdb_prompt" {
- return;
- }
- -re ".*$gdb_prompt" {
- incr tries;
- if { $tries == 5 } {
- fail "stepping out of breakpoint function";
- return;
- }
- send_gdb "${command}\n";
- exp_continue;
- }
- default {
- fail "stepping out of breakpoint function";
- return;
- }
- }
- }
- send_gdb "where\n";
- gdb_expect {
- -re "main\[^\r\n\]*at \(\[^:]+\):\(\[0-9\]+\)" {
- set file $expect_out(1,string);
- set linenum [expr $expect_out(2,string) + 1];
- set breakplace "${file}:${linenum}";
- }
- default {}
- }
- send_gdb "break ${breakplace}\n";
- gdb_expect 60 {
- -re "Breakpoint (\[0-9\]+) at.*$gdb_prompt" {
- set breakpoint $expect_out(1,string);
- }
- -re "Breakpoint (\[0-9\]+): file.*$gdb_prompt" {
- set breakpoint $expect_out(1,string);
- }
- default {}
- }
- send_gdb "continue\n";
- gdb_expect 60 {
- -re "Breakpoint ${breakpoint},.*$gdb_prompt" {
- gdb_test "delete $breakpoint" ".*" "";
- return;
- }
- default {}
- }
+ return $ret
}
# gdb_get_line_number TEXT [FILE]
#
# Search the source file FILE, and return the line number of the
-# first line containing TEXT. If no match is found, return -1.
+# first line containing TEXT. If no match is found, an error is thrown.
#
# TEXT is a string literal, not a regular expression.
#
}
if { [ catch { set fd [open "$file"] } message ] } then {
- perror "$message"
- return -1
+ error "$message"
}
set found -1
for { set line 1 } { 1 } { incr line } {
if { [ catch { set nchar [gets "$fd" body] } message ] } then {
- perror "$message"
- return -1
+ error "$message"
}
if { $nchar < 0 } then {
break
}
if { [ catch { close "$fd" } message ] } then {
- perror "$message"
- return -1
+ error "$message"
+ }
+
+ if {$found == -1} {
+ error "undefined tag \"$text\""
}
return $found
# is accepted.
proc gdb_continue_to_end {{mssg ""} {command continue} {allow_extra 0}} {
- global inferior_exited_re
+ global inferior_exited_re use_gdb_stub
if {$mssg == ""} {
set text "continue until exit"
} else {
set extra ""
}
- if [target_info exists use_gdb_stub] {
+ if $use_gdb_stub {
if {![gdb_breakpoint "exit"]} {
return 0
}
}
proc rerun_to_main {} {
- global gdb_prompt
+ global gdb_prompt use_gdb_stub
- if [target_info exists use_gdb_stub] {
+ if $use_gdb_stub {
gdb_run_cmd
gdb_expect {
-re ".*Breakpoint .*main .*$gdb_prompt $"\
proc gdb_skip_float_test { msg } {
if [target_info exists gdb,skip_float_tests] {
verbose "Skipping test '$msg': no float tests.";
- return 1;
+ return 1
}
- return 0;
+ return 0
}
# Print a message and return true if a test should be skipped
proc gdb_skip_stdio_test { msg } {
if [target_info exists gdb,noinferiorio] {
verbose "Skipping test '$msg': no inferior i/o.";
- return 1;
+ return 1
}
- return 0;
+ return 0
}
proc gdb_skip_bogus_test { msg } {
- return 0;
+ return 0
}
# Return true if a test should be skipped due to lack of XML support
# Convert it to hex.
binary scan $data H* data
regsub {^..} $data {\0/} data
- return ".build-id/${data}.debug";
+ return ".build-id/${data}.debug"
}
# Create stripped files for DEST, replacing it. If ARGS is passed, it is a
gdb_test "${gdb_command}" "${expected_output}" $message
}
-# Test the output of "help COMMNAD_CLASS". EXPECTED_INITIAL_LINES
+# Test the output of "help COMMAND_CLASS". EXPECTED_INITIAL_LINES
# are regular expressions that should match the beginning of output,
# before the list of commands in that class. The presence of
# command list and standard epilogue will be tested automatically.
}
}
-# Build executable named EXECUTABLE, from SOURCES. If SOURCES are not
-# provided, uses $EXECUTABLE.c. The TESTNAME paramer is the name of test
-# to pass to untested, if something is wrong. OPTIONS are passed
-# to gdb_compile directly.
-proc build_executable { testname executable {sources ""} {options {debug}} } {
-
- global objdir
+# Build executable named EXECUTABLE from specifications that allow
+# different options to be passed to different sub-compilations.
+# TESTNAME is the name of the test; this is passed to 'untested' if
+# something fails.
+# OPTIONS is passed to the final link, using gdb_compile.
+# ARGS is a flat list of source specifications, of the form:
+# { SOURCE1 OPTIONS1 [ SOURCE2 OPTIONS2 ]... }
+# Each SOURCE is compiled to an object file using its OPTIONS,
+# using gdb_compile.
+# Returns 0 on success, -1 on failure.
+proc build_executable_from_specs {testname executable options args} {
global subdir
global srcdir
- if {[llength $sources]==0} {
- set sources ${executable}.c
- }
- set binfile ${objdir}/${subdir}/${executable}
+ set binfile [standard_output_file $executable]
set objects {}
- for {set i 0} "\$i<[llength $sources]" {incr i} {
- set s [lindex $sources $i]
- if { [gdb_compile "${srcdir}/${subdir}/${s}" "${binfile}${i}.o" object $options] != "" } {
+ set i 0
+ foreach {s local_options} $args {
+ if { [gdb_compile "${srcdir}/${subdir}/${s}" "${binfile}${i}.o" object $local_options] != "" } {
untested $testname
return -1
}
lappend objects "${binfile}${i}.o"
+ incr i
}
if { [gdb_compile $objects "${binfile}" executable $options] != "" } {
if { [lsearch -exact $options "c++"] >= 0 } {
set info_options "c++"
}
- if [get_compiler_info ${binfile} ${info_options}] {
+ if [get_compiler_info ${info_options}] {
return -1
}
return 0
}
+# Build executable named EXECUTABLE, from SOURCES. If SOURCES are not
+# provided, uses $EXECUTABLE.c. The TESTNAME paramer is the name of test
+# to pass to untested, if something is wrong. OPTIONS are passed
+# to gdb_compile directly.
+proc build_executable { testname executable {sources ""} {options {debug}} } {
+ if {[llength $sources]==0} {
+ set sources ${executable}.c
+ }
+
+ set arglist [list $testname $executable $options]
+ foreach source $sources {
+ lappend arglist $source $options
+ }
+
+ return [eval build_executable_from_specs $arglist]
+}
+
# Starts fresh GDB binary and loads EXECUTABLE into GDB. EXECUTABLE is
-# the name of binary in ${objdir}/${subdir}.
+# the basename of the binary.
proc clean_restart { executable } {
global srcdir
- global objdir
global subdir
- set binfile ${objdir}/${subdir}/${executable}
+ set binfile [standard_output_file ${executable}]
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
+}
- if [target_info exists gdb_stub] {
- gdb_step_for_stub;
- }
+# Prepares for testing by calling build_executable_full, then
+# clean_restart.
+# TESTNAME is the name of the test.
+# Each element in ARGS is a list of the form
+# { EXECUTABLE OPTIONS SOURCE_SPEC... }
+# These are passed to build_executable_from_specs, which see.
+# The last EXECUTABLE is passed to clean_restart.
+# Returns 0 on success, non-zero on failure.
+proc prepare_for_testing_full {testname args} {
+ foreach spec $args {
+ if {[eval build_executable_from_specs [list $testname] $spec] == -1} {
+ return -1
+ }
+ set executable [lindex $spec 0]
+ }
+ clean_restart $executable
+ return 0
}
# Prepares for testing, by calling build_executable, and then clean_restart.
gdb_test_multiple "show remotetimeout" "" {
-re "Timeout limit to wait for target to respond is ($decimal).*$gdb_prompt $" {
- return $expect_out(1,string);
+ return $expect_out(1,string)
}
}
# could have many core files lying around, and it may be difficult to
# tell which one is ours, so let's run the program in a subdirectory.
set found 0
- set coredir "${objdir}/${subdir}/coredir.[getpid]"
+ set coredir [standard_output_file coredir.[getpid]]
file mkdir $coredir
catch "system \"(cd ${coredir}; ulimit -c unlimited; ${binfile} ${arg}; true) >/dev/null 2>&1\""
# remote_exec host "${binfile}"