-# Copyright 1999, 2000, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+# Copyright 1999, 2000, 2002, 2003, 2004, 2005, 2007, 2008
+# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
-#
+#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-#
+#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu
proc mi_gdb_target_cmd { targetname serialport } {
global mi_gdb_prompt
+ set serialport_re [string_to_regexp $serialport]
for {set i 1} {$i <= 3} {incr i} {
send_gdb "47-target-select $targetname $serialport\n"
gdb_expect 60 {
verbose "Set target to $targetname";
return 0;
}
- -re "Remote debugging using .*$serialport.*$mi_gdb_prompt$" {
+ -re "Remote debugging using .*$serialport_re.*$mi_gdb_prompt$" {
verbose "Set target to $targetname";
return 0;
}
global loadfile
global GDB
global mi_gdb_prompt
- global last_mi_gdb_file
- global last_mi_remote_file
+ global last_loaded_file
upvar timeout timeout
- if { $arg == "" } {
- set arg $last_mi_gdb_file;
- } else {
- set last_mi_gdb_file $arg
- if { [ info exists last_mi_remote_file ] } {
- unset last_mi_remote_file
- }
- }
+ set last_loaded_file $arg
if [is_remote host] {
set arg [remote_download host $arg];
}
#
-# load a file into the debugger.
+# connect to the target and download a file, if necessary.
# return a -1 if anything goes wrong.
#
-proc mi_gdb_load { arg } {
+proc mi_gdb_target_load { } {
global verbose
global loadpath
global loadfile
global mi_gdb_prompt
upvar timeout timeout
- # ``gdb_unload''
- if { $arg != "" } {
- mi_gdb_file_cmd $arg
- }
-
- # ``load''
if { [info procs gdbserver_gdb_load] != "" } {
- global last_mi_gdb_file
- global last_mi_remote_file
-
- if { ! [info exists last_mi_remote_file] } {
- if [is_remote target] {
- set last_mi_remote_file [remote_download target $arg /tmp/[file tail $arg].[pid]]
- } else {
- set last_mi_remote_file $last_mi_gdb_file
- }
- }
-
- set res [gdbserver_gdb_load $last_mi_remote_file]
+ mi_gdb_test "kill" ".*" ""
+ set res [gdbserver_gdb_load]
set protocol [lindex $res 0]
set gdbport [lindex $res 1]
}
} elseif { [info procs send_target_sid] != "" } {
# For SID, things get complex
+ send_gdb "kill\n"
+ gdb_expect 10 {
+ -re ".*$mi_gdb_prompt$"
+ }
send_target_sid
gdb_expect 60 {
-re "\\^done.*$mi_gdb_prompt$" {
return 0
}
+#
+# load a file into the debugger.
+# return a -1 if anything goes wrong.
+#
+proc mi_gdb_load { arg } {
+ if { $arg != "" } {
+ return [mi_gdb_file_cmd $arg]
+ }
+ return 0
+}
+
# mi_gdb_test COMMAND PATTERN MESSAGE [IPATTERN] -- send a command to gdb;
# test the result.
#
# If the GDB output matched, compare the inferior output.
if { $result == 0 } {
if [ info exists ipattern ] {
- global mi_inferior_spawn_id
- expect {
- -i $mi_inferior_spawn_id -re "$ipattern" {
- pass "inferior_output:$message"
- }
- timeout {
- fail "inferior output timeout"
- set result 1
+ if { ![target_info exists gdb,noinferiorio] } {
+ global mi_inferior_spawn_id
+ expect {
+ -i $mi_inferior_spawn_id -re "$ipattern" {
+ pass "$message inferior output"
+ }
+ timeout {
+ fail "$message inferior output (timeout)"
+ set result 1
+ }
}
+ } else {
+ unsupported "$message inferior output"
}
}
}
}
}
+ if { [mi_gdb_target_load] < 0 } {
+ return
+ }
+
if [target_info exists use_gdb_stub] {
if [target_info exists gdb,do_reload_on_run] {
- # Specifying no file, defaults to the executable
- # currently being debugged.
- if { [mi_gdb_load ""] < 0 } {
- return;
- }
send_gdb "000-exec-continue\n";
gdb_expect 60 {
-re "000\\^running\[\r\n\]+$mi_gdb_prompt$" {}
return
}
}
- # NOTE: Shortly after this there will be a ``000*stopping,...(gdb)''
+ # NOTE: Shortly after this there will be a ``000*stopped,...(gdb)''
}
#
# -1 if test suppressed, failed, timedout
# 0 if test passed
-proc mi_runto {func} {
+proc mi_runto_helper {func run_or_continue} {
global suppress_flag
if { $suppress_flag } {
return -1
set bkptno {[0-9]+}
}
- mi_run_cmd
+ if {$run_or_continue == "run"} {
+ mi_run_cmd
+ } else {
+ send_gdb "000-exec-continue\n"
+ gdb_expect {
+ -re "000\\^running\r\n${mi_gdb_prompt}" {
+ }
+ timeout {
+ fail "$test"
+ return -1
+ }
+ }
+ }
+
gdb_expect {
-re ".*000\\*stopped,thread-id=\"$decimal\",frame=\{addr=\"$hex\",func=\"$func\",args=\(\\\[.*\\\]\|\{.*\}\),file=\".*\",fullname=\"${fullname_syntax}.*\",line=\"\[0-9\]*\"\}\r\n$mi_gdb_prompt$" {
pass "$test"
}
}
+proc mi_runto {func} {
+ mi_runto_helper $func "run"
+}
# Next to the next statement
# For return values, see mi_execute_to_helper
"$test"
}
-proc mi_continue_to { bkptno func args file line test } {
- mi_execute_to "exec-continue" "breakpoint-hit\",bkptno=\"$bkptno" \
- "$func" "$args" "$file" "$line" "" "$test"
+proc mi_continue_to {func} {
+ mi_runto_helper $func "continue"
}
proc mi0_execute_to { cmd reason func args file line extra test } {
# Name cannot be "-".
proc mi_create_varobj { name expression testname } {
mi_gdb_test "-var-create $name * $expression" \
- "\\^done,name=\"$name\",numchild=\"\[0-9\]+\",type=.*" \
+ "\\^done,name=\"$name\",numchild=\"\[0-9\]+\",value=\".*\",type=.*" \
+ $testname
+}
+
+# Deletes the specified NAME.
+proc mi_delete_varobj { name testname } {
+ mi_gdb_test "-var-delete $name" \
+ "\\^done,ndeleted=.*" \
$testname
}
set first 1
foreach item $expected {
set v "{name=\"$item\",in_scope=\"true\",type_changed=\"false\"}"
- if {$first} {
+ if {$first == 1} {
set er "$er$v"
+ set first 0
} else {
set er "$er,$v"
}
mi_gdb_test "-var-list-children $varname" $expected $testname
}
+
+# A list of two-element lists. First element of each list is
+# a Tcl statement, and the second element is the line
+# number of source C file where the statement originates.
+set mi_autotest_data ""
+# The name of the source file for autotesting.
+set mi_autotest_source ""
+
+proc count_newlines { string } {
+ return [regexp -all "\n" $string]
+}
+
+# Prepares for running inline tests in FILENAME.
+# See comments for mi_run_inline_test for detailed
+# explanation of the idea and syntax.
+proc mi_prepare_inline_tests { filename } {
+
+ global srcdir
+ global subdir
+ global mi_autotest_source
+ global mi_autotest_data
+
+ set mi_autotest_data {}
+
+ set mi_autotest_source $filename
+
+ if { ! [regexp "^/" "$filename"] } then {
+ set filename "$srcdir/$subdir/$filename"
+ }
+
+ set chan [open $filename]
+ set content [read $chan]
+ set line_number 1
+ while {1} {
+ set start [string first "/*:" $content]
+ if {$start != -1} {
+ set end [string first ":*/" $content]
+ if {$end == -1} {
+ error "Unterminated special comment in $filename"
+ }
+
+ set prefix [string range $content 0 $start]
+ set prefix_newlines [count_newlines $prefix]
+
+ set line_number [expr $line_number+$prefix_newlines]
+ set comment_line $line_number
+
+ set comment [string range $content [expr $start+3] [expr $end-1]]
+
+ set comment_newlines [count_newlines $comment]
+ set line_number [expr $line_number+$comment_newlines]
+
+ set comment [string trim $comment]
+ set content [string range $content [expr $end+3] \
+ [string length $content]]
+ lappend mi_autotest_data [list $comment $comment_line]
+ } else {
+ break
+ }
+ }
+ close $chan
+}
+
+# Helper to mi_run_inline_test below.
+# Return the list of all (statement,line_number) lists
+# that comprise TESTCASE. The begin and end markers
+# are not included.
+proc mi_get_inline_test {testcase} {
+
+ global mi_gdb_prompt
+ global mi_autotest_data
+ global mi_autotest_source
+
+ set result {}
+
+ set seen_begin 0
+ set seen_end 0
+ foreach l $mi_autotest_data {
+
+ set comment [lindex $l 0]
+
+ if {$comment == "BEGIN: $testcase"} {
+ set seen_begin 1
+ } elseif {$comment == "END: $testcase"} {
+ set seen_end 1
+ break
+ } elseif {$seen_begin==1} {
+ lappend result $l
+ }
+ }
+
+ if {$seen_begin == 0} {
+ error "Autotest $testcase not found"
+ }
+
+ if {$seen_begin == 1 && $seen_end == 0} {
+ error "Missing end marker for test $testcase"
+ }
+
+ return $result
+}
+
+# Sets temporary breakpoint at LOCATION.
+proc mi_tbreak {location} {
+
+ global mi_gdb_prompt
+
+ mi_gdb_test "-break-insert -t $location" \
+ {\^done,bkpt=.*} \
+ "run to $location (set breakpoint)"
+}
+
+# Send COMMAND that must be a command that resumes
+# the inferiour (run/continue/next/etc) and consumes
+# the "^running" output from it.
+proc mi_send_resuming_command {command test} {
+
+ global mi_gdb_prompt
+
+ send_gdb "220-$command\n"
+ gdb_expect {
+ -re "220\\^running\r\n${mi_gdb_prompt}" {
+ }
+ timeout {
+ fail $test
+ }
+ }
+}
+
+# Helper to mi_run_inline_test below.
+# Sets a temporary breakpoint at LOCATION and runs
+# the program using COMMAND. When the program is stopped
+# returns the line at which it. Returns -1 if line cannot
+# be determined.
+# Does not check that the line is the same as requested.
+# The caller can check itself if required.
+proc mi_continue_to_line {location test} {
+
+ mi_tbreak $location
+ mi_send_resuming_command "exec-continue" "run to $location (exec-continue)"
+ return [mi_wait_for_stop $test]
+}
+
+# Wait until gdb prints the current line.
+proc mi_wait_for_stop {test} {
+
+ global mi_gdb_prompt
+
+ gdb_expect {
+ -re ".*line=\"(.*)\".*\r\n$mi_gdb_prompt$" {
+ return $expect_out(1,string)
+ }
+ -re ".*$mi_gdb_prompt$" {
+ fail "wait for stop ($test)"
+ }
+ timeout {
+ fail "wait for stop ($test)"
+ }
+ }
+}
+
+# Run a MI test embedded in comments in a C file.
+# The C file should contain special comments in the following
+# three forms:
+#
+# /*: BEGIN: testname :*/
+# /*: <Tcl statements> :*/
+# /*: END: testname :*/
+#
+# This procedure find the begin and end marker for the requested
+# test. Then, a temporary breakpoint is set at the begin
+# marker and the program is run (from start).
+#
+# After that, for each special comment between the begin and end
+# marker, the Tcl statements are executed. It is assumed that
+# for each comment, the immediately preceding line is executable
+# C statement. Then, gdb will be single-stepped until that
+# preceding C statement is executed, and after that the
+# Tcl statements in the comment will be executed.
+#
+# For example:
+#
+# /*: BEGIN: assignment-test :*/
+# v = 10;
+# /*: <Tcl code to check that 'v' is indeed 10 :*/
+# /*: END: assignment-test :*/
+#
+# The mi_prepare_inline_tests function should be called before
+# calling this function. A given C file can contain several
+# inline tests. The names of the tests must be unique within one
+# C file.
+#
+proc mi_run_inline_test { testcase } {
+
+ global mi_gdb_prompt
+ global hex
+ global decimal
+ global fullname_syntax
+ global mi_autotest_source
+
+ set commands [mi_get_inline_test $testcase]
+
+ set first 1
+ set line_now 1
+
+ foreach c $commands {
+ set statements [lindex $c 0]
+ set line [lindex $c 1]
+ set line [expr $line-1]
+
+ # We want gdb to be stopped at the expression immediately
+ # before the comment. If this is the first comment, the
+ # program is either not started yet or is in some random place,
+ # so we run it. For further comments, we might be already
+ # standing at the right line. If not continue till the
+ # right line.
+
+ if {$first==1} {
+ # Start the program afresh.
+ mi_tbreak "$mi_autotest_source:$line"
+ mi_run_cmd
+ set line_now [mi_wait_for_stop "$testcase: step to $line"]
+ set first 0
+ } elseif {$line_now!=$line} {
+ set line_now [mi_continue_to_line "$mi_autotest_source:$line" "continue to $line"]
+ }
+
+ if {$line_now!=$line} {
+ fail "$testcase: go to line $line"
+ }
+
+ # We're not at the statement right above the comment.
+ # Execute that statement so that the comment can test
+ # the state after the statement is executed.
+
+ # Single-step past the line.
+ mi_send_resuming_command "exec-next" "$testcase: step over $line"
+ set line_now [mi_wait_for_stop "$testcase: step over $line"]
+
+ # We probably want to use 'uplevel' so that statements
+ # have direct access to global variables that the
+ # main 'exp' file has set up. But it's not yet clear,
+ # will need more experience to be sure.
+ eval $statements
+ }
+}