/* libthread_db assisted debugging support, generic parts.
- Copyright 1999, 2000 Free Software Foundation, Inc.
+
+ Copyright 1999, 2000, 2001, 2003 Free Software Foundation, Inc.
This file is part of GDB.
#include "symfile.h"
#include "objfiles.h"
#include "target.h"
+#include "regcache.h"
+#include "solib-svr4.h"
#ifndef LIBTHREAD_DB_SO
#define LIBTHREAD_DB_SO "libthread_db.so.1"
#endif
-/* If we're running on Linux, we must explicitly attach to any new threads. */
+/* If we're running on GNU/Linux, we must explicitly attach to any new
+ threads. */
/* FIXME: There is certainly some room for improvements:
- Cache LWP ids.
static struct target_ops *target_beneath;
/* Pointer to the next function on the objfile event chain. */
-static void (*target_new_objfile_chain) (struct objfile *objfile);
+static void (*target_new_objfile_chain) (struct objfile * objfile);
/* Non-zero if we're using this module's target vector. */
static int using_thread_db;
-/* Non-zero if we musn't deactivate this module's target vector. */
+/* Non-zero if we have to keep this module's target vector active
+ across re-runs. */
static int keep_thread_db;
/* Non-zero if we have determined the signals used by the threads
static td_err_e (*td_init_p) (void);
-static td_err_e (*td_ta_new_p) (struct ps_prochandle *ps, td_thragent_t **ta);
+static td_err_e (*td_ta_new_p) (struct ps_prochandle * ps,
+ td_thragent_t **ta);
static td_err_e (*td_ta_map_id2thr_p) (const td_thragent_t *ta, thread_t pt,
td_thrhandle_t *__th);
-static td_err_e (*td_ta_map_lwp2thr_p) (const td_thragent_t *ta, lwpid_t lwpid,
- td_thrhandle_t *th);
+static td_err_e (*td_ta_map_lwp2thr_p) (const td_thragent_t *ta,
+ lwpid_t lwpid, td_thrhandle_t *th);
static td_err_e (*td_ta_thr_iter_p) (const td_thragent_t *ta,
- td_thr_iter_f *callback,
- void *cbdata_p, td_thr_state_e state,
- int ti_pri, sigset_t *ti_sigmask_p,
+ td_thr_iter_f *callback, void *cbdata_p,
+ td_thr_state_e state, int ti_pri,
+ sigset_t *ti_sigmask_p,
unsigned int ti_user_flags);
static td_err_e (*td_ta_event_addr_p) (const td_thragent_t *ta,
td_event_e event, td_notify_t *ptr);
const gdb_prfpregset_t *fpregs);
static td_err_e (*td_thr_setgregs_p) (const td_thrhandle_t *th,
prgregset_t gregs);
-static td_err_e (*td_thr_event_enable_p) (const td_thrhandle_t *th, int event);
+static td_err_e (*td_thr_event_enable_p) (const td_thrhandle_t *th,
+ int event);
+
+static td_err_e (*td_thr_tls_get_addr_p) (const td_thrhandle_t *th,
+ void *map_address,
+ size_t offset, void **address);
/* Location of the thread creation event breakpoint. The code at this
location in the child process will be called by the pthread library
/* Prototypes for local functions. */
static void thread_db_find_new_threads (void);
+static void attach_thread (ptid_t ptid, const td_thrhandle_t *th_p,
+ const td_thrinfo_t *ti_p, int verbose);
\f
/* Building process ids. */
-#ifndef TIDGET
-#define TIDGET(PID) (((PID) & 0x7fffffff) >> 16)
-#define PIDGET(PID) (((PID) & 0xffff))
-#define MERGEPID(PID, TID) (((PID) & 0xffff) | ((TID) << 16))
-#endif
-
-#define THREAD_FLAG 0x80000000
-
-#define is_lwp(pid) (((pid) & THREAD_FLAG) == 0 && TIDGET (pid))
-#define is_thread(pid) ((pid) & THREAD_FLAG)
-
-#define GET_PID(pid) PIDGET (pid)
-#define GET_LWP(pid) TIDGET (pid)
-#define GET_THREAD(pid) TIDGET (pid)
+#define GET_PID(ptid) ptid_get_pid (ptid)
+#define GET_LWP(ptid) ptid_get_lwp (ptid)
+#define GET_THREAD(ptid) ptid_get_tid (ptid)
-#define BUILD_LWP(tid, pid) MERGEPID (pid, tid)
-#define BUILD_THREAD(tid, pid) (MERGEPID (pid, tid) | THREAD_FLAG)
-\f
-
-struct private_thread_info
-{
- /* Cached LWP id. Must come first, see lin-lwp.c. */
- lwpid_t lwpid;
-};
+#define is_lwp(ptid) (GET_LWP (ptid) != 0)
+#define is_thread(ptid) (GET_THREAD (ptid) != 0)
+#define BUILD_LWP(lwp, pid) ptid_build (pid, lwp, 0)
+#define BUILD_THREAD(tid, pid) ptid_build (pid, 0, tid)
\f
-/* Helper functions. */
-static void
-restore_inferior_pid (void *arg)
-{
- int *saved_pid_ptr = arg;
- inferior_pid = *saved_pid_ptr;
- xfree (arg);
-}
+/* Use "struct private_thread_info" to cache thread state. This is
+ a substantial optimization. */
-static struct cleanup *
-save_inferior_pid (void)
+struct private_thread_info
{
- int *saved_pid_ptr;
+ /* Cached thread state. */
+ unsigned int th_valid:1;
+ unsigned int ti_valid:1;
- saved_pid_ptr = xmalloc (sizeof (int));
- *saved_pid_ptr = inferior_pid;
- return make_cleanup (restore_inferior_pid, saved_pid_ptr);
-}
+ td_thrhandle_t th;
+ td_thrinfo_t ti;
+};
\f
static char *
}
}
\f
+/* A callback function for td_ta_thr_iter, which we use to map all
+ threads to LWPs.
-/* Convert between user-level thread ids and LWP ids. */
+ THP is a handle to the current thread; if INFOP is not NULL, the
+ struct thread_info associated with this thread is returned in
+ *INFOP. */
static int
-thread_from_lwp (int pid)
+thread_get_info_callback (const td_thrhandle_t *thp, void *infop)
{
td_thrinfo_t ti;
- td_thrhandle_t th;
td_err_e err;
+ struct thread_info *thread_info;
+ ptid_t thread_ptid;
+
+ err = td_thr_get_info_p (thp, &ti);
+ if (err != TD_OK)
+ error ("thread_get_info_callback: cannot get thread info: %s",
+ thread_db_err_str (err));
+
+ /* Fill the cache. */
+ thread_ptid = BUILD_THREAD (ti.ti_tid, GET_PID (inferior_ptid));
+ thread_info = find_thread_pid (thread_ptid);
- if (GET_LWP (pid) == 0)
- pid = BUILD_LWP (pid, pid);
+ if (thread_info == NULL)
+ {
+ /* New thread. Attach to it now (why wait?). */
+ attach_thread (thread_ptid, thp, &ti, 1);
+ thread_info = find_thread_pid (thread_ptid);
+ gdb_assert (thread_info != NULL);
+ }
+
+ memcpy (&thread_info->private->th, thp, sizeof (*thp));
+ thread_info->private->th_valid = 1;
+ memcpy (&thread_info->private->ti, &ti, sizeof (ti));
+ thread_info->private->ti_valid = 1;
+
+ if (infop != NULL)
+ *(struct thread_info **) infop = thread_info;
+
+ return 0;
+}
+
+/* Accessor functions for the thread_db information, with caching. */
+
+static void
+thread_db_map_id2thr (struct thread_info *thread_info, int fatal)
+{
+ td_err_e err;
- gdb_assert (is_lwp (pid));
+ if (thread_info->private->th_valid)
+ return;
- err = td_ta_map_lwp2thr_p (thread_agent, GET_LWP (pid), &th);
+ err = td_ta_map_id2thr_p (thread_agent, GET_THREAD (thread_info->ptid),
+ &thread_info->private->th);
if (err != TD_OK)
- error ("Cannot find user-level thread for LWP %d: %s",
- GET_LWP (pid), thread_db_err_str (err));
+ {
+ if (fatal)
+ error ("Cannot find thread %ld: %s",
+ (long) GET_THREAD (thread_info->ptid),
+ thread_db_err_str (err));
+ }
+ else
+ thread_info->private->th_valid = 1;
+}
- err = td_thr_get_info_p (&th, &ti);
+static td_thrinfo_t *
+thread_db_get_info (struct thread_info *thread_info)
+{
+ td_err_e err;
+
+ if (thread_info->private->ti_valid)
+ return &thread_info->private->ti;
+
+ if (!thread_info->private->th_valid)
+ thread_db_map_id2thr (thread_info, 1);
+
+ err =
+ td_thr_get_info_p (&thread_info->private->th, &thread_info->private->ti);
if (err != TD_OK)
- error ("Cannot get thread info: %s", thread_db_err_str (err));
+ error ("thread_db_get_info: cannot get thread info: %s",
+ thread_db_err_str (err));
- return BUILD_THREAD (ti.ti_tid, GET_PID (pid));
+ thread_info->private->ti_valid = 1;
+ return &thread_info->private->ti;
}
+\f
+/* Convert between user-level thread ids and LWP ids. */
-static int
-lwp_from_thread (int pid)
+static ptid_t
+thread_from_lwp (ptid_t ptid)
{
- td_thrinfo_t ti;
td_thrhandle_t th;
td_err_e err;
+ struct thread_info *thread_info;
+ ptid_t thread_ptid;
- if (! is_thread (pid))
- return pid;
+ if (GET_LWP (ptid) == 0)
+ ptid = BUILD_LWP (GET_PID (ptid), GET_PID (ptid));
- err = td_ta_map_id2thr_p (thread_agent, GET_THREAD (pid), &th);
- if (err != TD_OK)
- error ("Cannot find thread %ld: %s",
- (long) GET_THREAD (pid), thread_db_err_str (err));
+ gdb_assert (is_lwp (ptid));
- err = td_thr_get_info_p (&th, &ti);
+ err = td_ta_map_lwp2thr_p (thread_agent, GET_LWP (ptid), &th);
if (err != TD_OK)
- error ("Cannot get thread info: %s", thread_db_err_str (err));
+ error ("Cannot find user-level thread for LWP %ld: %s",
+ GET_LWP (ptid), thread_db_err_str (err));
+
+ thread_info = NULL;
+ thread_get_info_callback (&th, &thread_info);
+ gdb_assert (thread_info && thread_info->private->ti_valid);
+
+ return BUILD_THREAD (thread_info->private->ti.ti_tid, GET_PID (ptid));
+}
+
+static ptid_t
+lwp_from_thread (ptid_t ptid)
+{
+ struct thread_info *thread_info;
+ ptid_t thread_ptid;
- return BUILD_LWP (ti.ti_lid, GET_PID (pid));
+ if (!is_thread (ptid))
+ return ptid;
+
+ thread_info = find_thread_pid (ptid);
+ thread_db_get_info (thread_info);
+
+ return BUILD_LWP (thread_info->private->ti.ti_lid, GET_PID (ptid));
}
\f
target_beneath = target;
}
+static void *
+verbose_dlsym (void *handle, const char *name)
+{
+ void *sym = dlsym (handle, name);
+ if (sym == NULL)
+ warning ("Symbol \"%s\" not found in libthread_db: %s", name, dlerror ());
+ return sym;
+}
+
static int
thread_db_load (void)
{
handle = dlopen (LIBTHREAD_DB_SO, RTLD_NOW);
if (handle == NULL)
- return 0;
+ {
+ fprintf_filtered (gdb_stderr, "\n\ndlopen failed on '%s' - %s\n",
+ LIBTHREAD_DB_SO, dlerror ());
+ fprintf_filtered (gdb_stderr,
+ "GDB will not be able to debug pthreads.\n\n");
+ return 0;
+ }
/* Initialize pointers to the dynamic library functions we will use.
Essential functions first. */
- td_init_p = dlsym (handle, "td_init");
+ td_init_p = verbose_dlsym (handle, "td_init");
if (td_init_p == NULL)
return 0;
- td_ta_new_p = dlsym (handle, "td_ta_new");
+ td_ta_new_p = verbose_dlsym (handle, "td_ta_new");
if (td_ta_new_p == NULL)
return 0;
- td_ta_map_id2thr_p = dlsym (handle, "td_ta_map_id2thr");
+ td_ta_map_id2thr_p = verbose_dlsym (handle, "td_ta_map_id2thr");
if (td_ta_map_id2thr_p == NULL)
return 0;
- td_ta_map_lwp2thr_p = dlsym (handle, "td_ta_map_lwp2thr");
+ td_ta_map_lwp2thr_p = verbose_dlsym (handle, "td_ta_map_lwp2thr");
if (td_ta_map_lwp2thr_p == NULL)
return 0;
- td_ta_thr_iter_p = dlsym (handle, "td_ta_thr_iter");
+ td_ta_thr_iter_p = verbose_dlsym (handle, "td_ta_thr_iter");
if (td_ta_thr_iter_p == NULL)
return 0;
- td_thr_validate_p = dlsym (handle, "td_thr_validate");
+ td_thr_validate_p = verbose_dlsym (handle, "td_thr_validate");
if (td_thr_validate_p == NULL)
return 0;
- td_thr_get_info_p = dlsym (handle, "td_thr_get_info");
+ td_thr_get_info_p = verbose_dlsym (handle, "td_thr_get_info");
if (td_thr_get_info_p == NULL)
return 0;
- td_thr_getfpregs_p = dlsym (handle, "td_thr_getfpregs");
+ td_thr_getfpregs_p = verbose_dlsym (handle, "td_thr_getfpregs");
if (td_thr_getfpregs_p == NULL)
return 0;
- td_thr_getgregs_p = dlsym (handle, "td_thr_getgregs");
+ td_thr_getgregs_p = verbose_dlsym (handle, "td_thr_getgregs");
if (td_thr_getgregs_p == NULL)
return 0;
- td_thr_setfpregs_p = dlsym (handle, "td_thr_setfpregs");
+ td_thr_setfpregs_p = verbose_dlsym (handle, "td_thr_setfpregs");
if (td_thr_setfpregs_p == NULL)
return 0;
- td_thr_setgregs_p = dlsym (handle, "td_thr_setgregs");
+ td_thr_setgregs_p = verbose_dlsym (handle, "td_thr_setgregs");
if (td_thr_setgregs_p == NULL)
return 0;
td_ta_set_event_p = dlsym (handle, "td_ta_set_event");
td_ta_event_getmsg_p = dlsym (handle, "td_ta_event_getmsg");
td_thr_event_enable_p = dlsym (handle, "td_thr_event_enable");
+ td_thr_tls_get_addr_p = dlsym (handle, "td_thr_tls_get_addr");
return 1;
}
err = td_ta_event_addr_p (thread_agent, TD_DEATH, ¬ify);
if (err != TD_OK)
{
- warning ("Unable to get location for thread creation breakpoint: %s",
+ warning ("Unable to get location for thread death breakpoint: %s",
thread_db_err_str (err));
return;
}
check_thread_signals (void)
{
#ifdef GET_THREAD_SIGNALS
- if (! thread_signals)
+ if (!thread_signals)
{
sigset_t mask;
int i;
sigemptyset (&thread_stop_set);
sigemptyset (&thread_print_set);
- for (i = 0; i < NSIG; i++)
+ for (i = 1; i < NSIG; i++)
{
if (sigismember (&mask, i))
{
{
int i;
- for (i = 0; i < NSIG; i++)
+ for (i = 1; i < NSIG; i++)
{
if (sigismember (&thread_stop_set, i))
signal_stop_update (target_signal_from_host (i), 1);
#endif
}
-static void
-deactivate_target (void)
-{
- /* Forget about the child's process ID. We shouldn't need it
- anymore. */
- proc_handle.pid = 0;
-
- if (! keep_thread_db)
- {
- using_thread_db = 0;
- unpush_target (&thread_db_ops);
- }
-}
-
static void
thread_db_new_objfile (struct objfile *objfile)
{
td_err_e err;
- if (objfile == NULL)
+ /* First time through, report that libthread_db was successfuly
+ loaded. Can't print this in in thread_db_load as, at that stage,
+ the interpreter and it's console haven't started. The real
+ problem here is that libthread_db is loaded too early - it should
+ only be loaded when there is a program to debug. */
+ {
+ static int dejavu;
+ if (!dejavu)
+ {
+ Dl_info info;
+ const char *library = NULL;
+ /* Try dladdr. */
+ if (dladdr ((*td_ta_new_p), &info) != 0)
+ library = info.dli_fname;
+ /* Try dlinfo? */
+ if (library == NULL)
+ /* Paranoid - don't let a NULL path slip through. */
+ library = LIBTHREAD_DB_SO;
+ printf_unfiltered ("Using host libthread_db library \"%s\".\n",
+ library);
+ dejavu = 1;
+ }
+ }
+
+ /* Don't attempt to use thread_db on targets which can not run
+ (core files). */
+ if (objfile == NULL || !target_has_execution)
{
/* All symbols have been discarded. If the thread_db target is
- active, deactivate it now, even if the application was linked
- statically against the thread library. */
- keep_thread_db = 0;
+ active, deactivate it now. */
if (using_thread_db)
- deactivate_target ();
+ {
+ gdb_assert (proc_handle.pid == 0);
+ unpush_target (&thread_db_ops);
+ using_thread_db = 0;
+ }
+
+ keep_thread_db = 0;
goto quit;
}
/* Initialize the structure that identifies the child process. Note
that at this point there is no guarantee that we actually have a
child process. */
- proc_handle.pid = GET_PID (inferior_pid);
+ proc_handle.pid = GET_PID (inferior_ptid);
/* Now attempt to open a connection to the thread library. */
err = td_ta_new_p (&proc_handle, &thread_agent);
break;
case TD_OK:
+ printf_unfiltered ("[Thread debugging using libthread_db enabled]\n");
+
/* The thread library was detected. Activate the thread_db target. */
push_target (&thread_db_ops);
using_thread_db = 1;
break;
}
- quit:
+quit:
if (target_new_objfile_chain)
target_new_objfile_chain (objfile);
}
static void
-attach_thread (int pid, const td_thrhandle_t *th_p,
+attach_thread (ptid_t ptid, const td_thrhandle_t *th_p,
const td_thrinfo_t *ti_p, int verbose)
{
struct thread_info *tp;
check_thread_signals ();
- if (verbose)
- printf_unfiltered ("[New %s]\n", target_pid_to_str (pid));
-
/* Add the thread to GDB's thread list. */
- tp = add_thread (pid);
+ tp = add_thread (ptid);
tp->private = xmalloc (sizeof (struct private_thread_info));
- tp->private->lwpid = ti_p->ti_lid;
+ memset (tp->private, 0, sizeof (struct private_thread_info));
+
+ if (verbose)
+ printf_unfiltered ("[New %s]\n", target_pid_to_str (ptid));
- /* Under Linux, we have to attach to each and every thread. */
+ if (ti_p->ti_state == TD_THR_UNKNOWN || ti_p->ti_state == TD_THR_ZOMBIE)
+ return; /* A zombie thread -- do not attach. */
+
+ /* Under GNU/Linux, we have to attach to each and every thread. */
#ifdef ATTACH_LWP
- if (ti_p->ti_lid != GET_PID (pid))
- ATTACH_LWP (BUILD_LWP (ti_p->ti_lid, GET_PID (pid)), 0);
+ ATTACH_LWP (BUILD_LWP (ti_p->ti_lid, GET_PID (ptid)), 0);
#endif
/* Enable thread event reporting for this thread. */
err = td_thr_event_enable_p (th_p, 1);
if (err != TD_OK)
error ("Cannot enable thread event reporting for %s: %s",
- target_pid_to_str (pid), thread_db_err_str (err));
+ target_pid_to_str (ptid), thread_db_err_str (err));
}
static void
-detach_thread (int pid, int verbose)
+thread_db_attach (char *args, int from_tty)
+{
+ target_beneath->to_attach (args, from_tty);
+
+ /* Destroy thread info; it's no longer valid. */
+ init_thread_list ();
+
+ /* The child process is now the actual multi-threaded
+ program. Snatch its process ID... */
+ proc_handle.pid = GET_PID (inferior_ptid);
+
+ /* ...and perform the remaining initialization steps. */
+ enable_thread_event_reporting ();
+ thread_db_find_new_threads ();
+}
+
+static void
+detach_thread (ptid_t ptid, int verbose)
{
if (verbose)
- printf_unfiltered ("[%s exited]\n", target_pid_to_str (pid));
+ printf_unfiltered ("[%s exited]\n", target_pid_to_str (ptid));
}
static void
thread_db_detach (char *args, int from_tty)
{
disable_thread_event_reporting ();
- deactivate_target ();
+
+ /* There's no need to save & restore inferior_ptid here, since the
+ inferior is supposed to be survive this function call. */
+ inferior_ptid = lwp_from_thread (inferior_ptid);
+
+ /* Forget about the child's process ID. We shouldn't need it
+ anymore. */
+ proc_handle.pid = 0;
target_beneath->to_detach (args, from_tty);
}
+static int
+clear_lwpid_callback (struct thread_info *thread, void *dummy)
+{
+ /* If we know that our thread implementation is 1-to-1, we could save
+ a certain amount of information; it's not clear how much, so we
+ are always conservative. */
+
+ thread->private->th_valid = 0;
+ thread->private->ti_valid = 0;
+
+ return 0;
+}
+
static void
-thread_db_resume (int pid, int step, enum target_signal signo)
+thread_db_resume (ptid_t ptid, int step, enum target_signal signo)
{
- struct cleanup *old_chain = save_inferior_pid ();
+ struct cleanup *old_chain = save_inferior_ptid ();
+
+ if (GET_PID (ptid) == -1)
+ inferior_ptid = lwp_from_thread (inferior_ptid);
+ else if (is_thread (ptid))
+ ptid = lwp_from_thread (ptid);
- if (pid == -1)
- inferior_pid = lwp_from_thread (inferior_pid);
- else if (is_thread (pid))
- pid = lwp_from_thread (pid);
+ /* Clear cached data which may not be valid after the resume. */
+ iterate_over_threads (clear_lwpid_callback, NULL);
- target_beneath->to_resume (pid, step, signo);
+ target_beneath->to_resume (ptid, step, signo);
do_cleanups (old_chain);
}
the event. */
static void
-check_event (int pid)
+check_event (ptid_t ptid)
{
td_event_msg_t msg;
td_thrinfo_t ti;
td_err_e err;
CORE_ADDR stop_pc;
+ int loop = 0;
/* Bail out early if we're not at a thread event breakpoint. */
- stop_pc = read_pc_pid (pid) - DECR_PC_AFTER_BREAK;
+ stop_pc = read_pc_pid (ptid) - DECR_PC_AFTER_BREAK;
if (stop_pc != td_create_bp_addr && stop_pc != td_death_bp_addr)
return;
- err = td_ta_event_getmsg_p (thread_agent, &msg);
- if (err != TD_OK)
- {
- if (err == TD_NOMSG)
- return;
-
- error ("Cannot get thread event message: %s", thread_db_err_str (err));
- }
+ /* If we are at a create breakpoint, we do not know what new lwp
+ was created and cannot specifically locate the event message for it.
+ We have to call td_ta_event_getmsg() to get
+ the latest message. Since we have no way of correlating whether
+ the event message we get back corresponds to our breakpoint, we must
+ loop and read all event messages, processing them appropriately.
+ This guarantees we will process the correct message before continuing
+ from the breakpoint.
- err = td_thr_get_info_p (msg.th_p, &ti);
- if (err != TD_OK)
- error ("Cannot get thread info: %s", thread_db_err_str (err));
+ Currently, death events are not enabled. If they are enabled,
+ the death event can use the td_thr_event_getmsg() interface to
+ get the message specifically for that lwp and avoid looping
+ below. */
- pid = BUILD_THREAD (ti.ti_tid, GET_PID (pid));
+ loop = 1;
- switch (msg.event)
+ do
{
- case TD_CREATE:
-#if 0
- /* FIXME: kettenis/2000-08-26: Since we use td_ta_event_getmsg,
- there is no guarantee that the breakpoint will match the
- event. Should we use td_thr_event_getmsg instead? */
+ err = td_ta_event_getmsg_p (thread_agent, &msg);
+ if (err != TD_OK)
+ {
+ if (err == TD_NOMSG)
+ return;
- if (stop_pc != td_create_bp_addr)
- error ("Thread creation event doesn't match breakpoint.");
-#endif
+ error ("Cannot get thread event message: %s",
+ thread_db_err_str (err));
+ }
- if (in_thread_list (pid))
- error ("Spurious thread creation event.");
+ err = td_thr_get_info_p (msg.th_p, &ti);
+ if (err != TD_OK)
+ error ("Cannot get thread info: %s", thread_db_err_str (err));
- attach_thread (pid, msg.th_p, &ti, 1);
- return;
+ ptid = BUILD_THREAD (ti.ti_tid, GET_PID (ptid));
- case TD_DEATH:
-#if 0
- /* FIXME: See TD_CREATE. */
+ switch (msg.event)
+ {
+ case TD_CREATE:
- if (stop_pc != td_death_bp_addr)
- error ("Thread death event doesn't match breakpoint.");
-#endif
+ /* We may already know about this thread, for instance when the
+ user has issued the `info threads' command before the SIGTRAP
+ for hitting the thread creation breakpoint was reported. */
+ if (!in_thread_list (ptid))
+ attach_thread (ptid, msg.th_p, &ti, 1);
- if (! in_thread_list (pid))
- error ("Spurious thread death event.");
+ break;
- detach_thread (pid, 1);
- return;
+ case TD_DEATH:
- default:
- error ("Spurious thread event.");
+ if (!in_thread_list (ptid))
+ error ("Spurious thread death event.");
+
+ detach_thread (ptid, 1);
+
+ break;
+
+ default:
+ error ("Spurious thread event.");
+ }
}
+ while (loop);
}
-static int
-thread_db_wait (int pid, struct target_waitstatus *ourstatus)
+static ptid_t
+thread_db_wait (ptid_t ptid, struct target_waitstatus *ourstatus)
{
- extern int trap_pid;
+ extern ptid_t trap_ptid;
- if (pid != -1 && is_thread (pid))
- pid = lwp_from_thread (pid);
+ if (GET_PID (ptid) != -1 && is_thread (ptid))
+ ptid = lwp_from_thread (ptid);
- pid = target_beneath->to_wait (pid, ourstatus);
+ ptid = target_beneath->to_wait (ptid, ourstatus);
if (proc_handle.pid == 0)
/* The current child process isn't the actual multi-threaded
program yet, so don't try to do any special thread-specific
post-processing and bail out early. */
- return pid;
+ return ptid;
if (ourstatus->kind == TARGET_WAITKIND_EXITED)
- return -1;
+ return pid_to_ptid (-1);
if (ourstatus->kind == TARGET_WAITKIND_STOPPED
&& ourstatus->value.sig == TARGET_SIGNAL_TRAP)
/* Check for a thread event. */
- check_event (pid);
+ check_event (ptid);
- if (trap_pid)
- trap_pid = thread_from_lwp (trap_pid);
+ if (!ptid_equal (trap_ptid, null_ptid))
+ trap_ptid = thread_from_lwp (trap_ptid);
- return thread_from_lwp (pid);
+ return thread_from_lwp (ptid);
}
static int
thread_db_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write,
- struct target_ops *target)
+ struct mem_attrib *attrib, struct target_ops *target)
{
- struct cleanup *old_chain = save_inferior_pid ();
+ struct cleanup *old_chain = save_inferior_ptid ();
int xfer;
- if (is_thread (inferior_pid))
+ if (is_thread (inferior_ptid))
{
/* FIXME: This seems to be necessary to make sure breakpoints
are removed. */
- if (! target_thread_alive (inferior_pid))
- inferior_pid = GET_PID (inferior_pid);
+ if (!target_thread_alive (inferior_ptid))
+ inferior_ptid = pid_to_ptid (GET_PID (inferior_ptid));
else
- inferior_pid = lwp_from_thread (inferior_pid);
+ inferior_ptid = lwp_from_thread (inferior_ptid);
}
- xfer = target_beneath->to_xfer_memory (memaddr, myaddr, len, write, target);
+ xfer =
+ target_beneath->to_xfer_memory (memaddr, myaddr, len, write, attrib,
+ target);
do_cleanups (old_chain);
return xfer;
static void
thread_db_fetch_registers (int regno)
{
- td_thrhandle_t th;
+ struct thread_info *thread_info;
prgregset_t gregset;
gdb_prfpregset_t fpregset;
td_err_e err;
- if (! is_thread (inferior_pid))
+ if (!is_thread (inferior_ptid))
{
/* Pass the request to the target beneath us. */
target_beneath->to_fetch_registers (regno);
return;
}
- err = td_ta_map_id2thr_p (thread_agent, GET_THREAD (inferior_pid), &th);
- if (err != TD_OK)
- error ("Cannot find thread %ld: %s",
- (long) GET_THREAD (inferior_pid), thread_db_err_str (err));
+ thread_info = find_thread_pid (inferior_ptid);
+ thread_db_map_id2thr (thread_info, 1);
- err = td_thr_getgregs_p (&th, gregset);
+ err = td_thr_getgregs_p (&thread_info->private->th, gregset);
if (err != TD_OK)
error ("Cannot fetch general-purpose registers for thread %ld: %s",
- (long) GET_THREAD (inferior_pid), thread_db_err_str (err));
+ (long) GET_THREAD (inferior_ptid), thread_db_err_str (err));
- err = td_thr_getfpregs_p (&th, &fpregset);
+ err = td_thr_getfpregs_p (&thread_info->private->th, &fpregset);
if (err != TD_OK)
error ("Cannot get floating-point registers for thread %ld: %s",
- (long) GET_THREAD (inferior_pid), thread_db_err_str (err));
+ (long) GET_THREAD (inferior_ptid), thread_db_err_str (err));
/* Note that we must call supply_gregset after calling the thread_db
routines because the thread_db routines call ps_lgetgregs and
static void
thread_db_store_registers (int regno)
{
- td_thrhandle_t th;
prgregset_t gregset;
gdb_prfpregset_t fpregset;
td_err_e err;
+ struct thread_info *thread_info;
- if (! is_thread (inferior_pid))
+ if (!is_thread (inferior_ptid))
{
/* Pass the request to the target beneath us. */
target_beneath->to_store_registers (regno);
return;
}
- err = td_ta_map_id2thr_p (thread_agent, GET_THREAD (inferior_pid), &th);
- if (err != TD_OK)
- error ("Cannot find thread %ld: %s",
- (long) GET_THREAD (inferior_pid), thread_db_err_str (err));
+ thread_info = find_thread_pid (inferior_ptid);
+ thread_db_map_id2thr (thread_info, 1);
if (regno != -1)
{
- char raw[MAX_REGISTER_RAW_SIZE];
+ char raw[MAX_REGISTER_SIZE];
- read_register_gen (regno, raw);
+ deprecated_read_register_gen (regno, raw);
thread_db_fetch_registers (-1);
supply_register (regno, raw);
}
fill_gregset ((gdb_gregset_t *) gregset, -1);
fill_fpregset (&fpregset, -1);
- err = td_thr_setgregs_p (&th, gregset);
+ err = td_thr_setgregs_p (&thread_info->private->th, gregset);
if (err != TD_OK)
error ("Cannot store general-purpose registers for thread %ld: %s",
- (long) GET_THREAD (inferior_pid), thread_db_err_str (err));
- err = td_thr_setfpregs_p (&th, &fpregset);
+ (long) GET_THREAD (inferior_ptid), thread_db_err_str (err));
+ err = td_thr_setfpregs_p (&thread_info->private->th, &fpregset);
if (err != TD_OK)
error ("Cannot store floating-point registers for thread %ld: %s",
- (long) GET_THREAD (inferior_pid), thread_db_err_str (err));
+ (long) GET_THREAD (inferior_ptid), thread_db_err_str (err));
}
static void
thread_db_kill (void)
{
+ /* There's no need to save & restore inferior_ptid here, since the
+ inferior isn't supposed to survive this function call. */
+ inferior_ptid = lwp_from_thread (inferior_ptid);
target_beneath->to_kill ();
}
static void
thread_db_create_inferior (char *exec_file, char *allargs, char **env)
{
+ if (!keep_thread_db)
+ {
+ unpush_target (&thread_db_ops);
+ using_thread_db = 0;
+ }
+
target_beneath->to_create_inferior (exec_file, allargs, env);
}
static void
-thread_db_post_startup_inferior (int pid)
+thread_db_post_startup_inferior (ptid_t ptid)
{
if (proc_handle.pid == 0)
{
/* The child process is now the actual multi-threaded
program. Snatch its process ID... */
- proc_handle.pid = GET_PID (pid);
+ proc_handle.pid = GET_PID (ptid);
/* ...and perform the remaining initialization steps. */
enable_thread_event_reporting ();
- thread_db_find_new_threads();
+ thread_db_find_new_threads ();
}
}
thread_db_mourn_inferior (void)
{
remove_thread_event_breakpoints ();
- deactivate_target ();
+
+ /* Forget about the child's process ID. We shouldn't need it
+ anymore. */
+ proc_handle.pid = 0;
target_beneath->to_mourn_inferior ();
+
+ /* Detach thread_db target ops if not dealing with a statically
+ linked threaded program. This allows a corefile to be debugged
+ after finishing debugging of a threaded program. At present,
+ debugging a statically-linked threaded program is broken, but
+ the check is added below in the event that it is fixed in the
+ future. */
+ if (!keep_thread_db)
+ {
+ unpush_target (&thread_db_ops);
+ using_thread_db = 0;
+ }
}
static int
-thread_db_thread_alive (int pid)
+thread_db_thread_alive (ptid_t ptid)
{
- if (is_thread (pid))
+ td_thrhandle_t th;
+ td_err_e err;
+
+ if (is_thread (ptid))
{
- td_thrhandle_t th;
- td_err_e err;
+ struct thread_info *thread_info;
+ thread_info = find_thread_pid (ptid);
- err = td_ta_map_id2thr_p (thread_agent, GET_THREAD (pid), &th);
- if (err != TD_OK)
+ thread_db_map_id2thr (thread_info, 0);
+ if (!thread_info->private->th_valid)
return 0;
- err = td_thr_validate_p (&th);
+ err = td_thr_validate_p (&thread_info->private->th);
if (err != TD_OK)
return 0;
+ if (!thread_info->private->ti_valid)
+ {
+ err =
+ td_thr_get_info_p (&thread_info->private->th,
+ &thread_info->private->ti);
+ if (err != TD_OK)
+ return 0;
+ thread_info->private->ti_valid = 1;
+ }
+
+ if (thread_info->private->ti.ti_state == TD_THR_UNKNOWN
+ || thread_info->private->ti.ti_state == TD_THR_ZOMBIE)
+ return 0; /* A zombie thread. */
+
return 1;
}
if (target_beneath->to_thread_alive)
- return target_beneath->to_thread_alive (pid);
+ return target_beneath->to_thread_alive (ptid);
return 0;
}
{
td_thrinfo_t ti;
td_err_e err;
- int pid;
+ ptid_t ptid;
err = td_thr_get_info_p (th_p, &ti);
if (err != TD_OK)
- error ("Cannot get thread info: %s", thread_db_err_str (err));
+ error ("find_new_threads_callback: cannot get thread info: %s",
+ thread_db_err_str (err));
+
+ if (ti.ti_state == TD_THR_UNKNOWN || ti.ti_state == TD_THR_ZOMBIE)
+ return 0; /* A zombie -- ignore. */
- pid = BUILD_THREAD (ti.ti_tid, GET_PID (inferior_pid));
+ ptid = BUILD_THREAD (ti.ti_tid, GET_PID (inferior_ptid));
- if (! in_thread_list (pid))
- attach_thread (pid, th_p, &ti, 1);
+ if (!in_thread_list (ptid))
+ attach_thread (ptid, th_p, &ti, 1);
return 0;
}
}
static char *
-thread_db_pid_to_str (int pid)
+thread_db_pid_to_str (ptid_t ptid)
{
- if (is_thread (pid))
+ if (is_thread (ptid))
{
static char buf[64];
- td_thrhandle_t th;
- td_thrinfo_t ti;
+ td_thrinfo_t *ti_p;
td_err_e err;
+ struct thread_info *thread_info;
- err = td_ta_map_id2thr_p (thread_agent, GET_THREAD (pid), &th);
- if (err != TD_OK)
- error ("Cannot find thread %ld: %s",
- (long) GET_THREAD (pid), thread_db_err_str (err));
+ thread_info = find_thread_pid (ptid);
+ thread_db_map_id2thr (thread_info, 0);
+ if (!thread_info->private->th_valid)
+ {
+ snprintf (buf, sizeof (buf), "Thread %ld (Missing)",
+ GET_THREAD (ptid));
+ return buf;
+ }
- err = td_thr_get_info_p (&th, &ti);
- if (err != TD_OK)
- error ("Cannot get thread info for thread %ld: %s",
- (long) GET_THREAD (pid), thread_db_err_str (err));
+ ti_p = thread_db_get_info (thread_info);
- if (ti.ti_state == TD_THR_ACTIVE && ti.ti_lid != 0)
+ if (ti_p->ti_state == TD_THR_ACTIVE && ti_p->ti_lid != 0)
{
snprintf (buf, sizeof (buf), "Thread %ld (LWP %d)",
- (long) ti.ti_tid, ti.ti_lid);
+ (long) ti_p->ti_tid, ti_p->ti_lid);
}
else
{
snprintf (buf, sizeof (buf), "Thread %ld (%s)",
- (long) ti.ti_tid, thread_db_state_str (ti.ti_state));
+ (long) ti_p->ti_tid,
+ thread_db_state_str (ti_p->ti_state));
}
return buf;
}
- if (target_beneath->to_pid_to_str (pid))
- return target_beneath->to_pid_to_str (pid);
+ if (target_beneath->to_pid_to_str (ptid))
+ return target_beneath->to_pid_to_str (ptid);
+
+ return normal_pid_to_str (ptid);
+}
+
+/* Get the address of the thread local variable in OBJFILE which is
+ stored at OFFSET within the thread local storage for thread PTID. */
+
+static CORE_ADDR
+thread_db_get_thread_local_address (ptid_t ptid, struct objfile *objfile,
+ CORE_ADDR offset)
+{
+ if (is_thread (ptid))
+ {
+ int objfile_is_library = (objfile->flags & OBJF_SHARED);
+ td_err_e err;
+ void *address;
+ CORE_ADDR lm;
+ struct thread_info *thread_info;
+
+ /* glibc doesn't provide the needed interface. */
+ if (!td_thr_tls_get_addr_p)
+ error ("Cannot find thread-local variables in this thread library.");
+
+ /* Get the address of the link map for this objfile. */
+ lm = svr4_fetch_objfile_link_map (objfile);
+
+ /* Whoops, we couldn't find one. Bail out. */
+ if (!lm)
+ {
+ if (objfile_is_library)
+ error ("Cannot find shared library `%s' link_map in dynamic"
+ " linker's module list", objfile->name);
+ else
+ error ("Cannot find executable file `%s' link_map in dynamic"
+ " linker's module list", objfile->name);
+ }
+
+ /* Get info about the thread. */
+ thread_info = find_thread_pid (ptid);
+ thread_db_map_id2thr (thread_info, 1);
+
+ /* Finally, get the address of the variable. */
+ err = td_thr_tls_get_addr_p (&thread_info->private->th, (void *) lm,
+ offset, &address);
+
+#ifdef THREAD_DB_HAS_TD_NOTALLOC
+ /* The memory hasn't been allocated, yet. */
+ if (err == TD_NOTALLOC)
+ {
+ /* Now, if libthread_db provided the initialization image's
+ address, we *could* try to build a non-lvalue value from
+ the initialization image. */
+ if (objfile_is_library)
+ error ("The inferior has not yet allocated storage for"
+ " thread-local variables in\n"
+ "the shared library `%s'\n"
+ "for the thread %ld",
+ objfile->name, (long) GET_THREAD (ptid));
+ else
+ error ("The inferior has not yet allocated storage for"
+ " thread-local variables in\n"
+ "the executable `%s'\n"
+ "for the thread %ld",
+ objfile->name, (long) GET_THREAD (ptid));
+ }
+#endif
+
+ /* Something else went wrong. */
+ if (err != TD_OK)
+ {
+ if (objfile_is_library)
+ error ("Cannot find thread-local storage for thread %ld, "
+ "shared library %s:\n%s",
+ (long) GET_THREAD (ptid),
+ objfile->name, thread_db_err_str (err));
+ else
+ error ("Cannot find thread-local storage for thread %ld, "
+ "executable file %s:\n%s",
+ (long) GET_THREAD (ptid),
+ objfile->name, thread_db_err_str (err));
+ }
+
+ /* Cast assuming host == target. Joy. */
+ return (CORE_ADDR) address;
+ }
+
+ if (target_beneath->to_get_thread_local_address)
+ return target_beneath->to_get_thread_local_address (ptid, objfile,
+ offset);
- return normal_pid_to_str (pid);
+ error ("Cannot find thread-local values on this target.");
}
static void
thread_db_ops.to_shortname = "multi-thread";
thread_db_ops.to_longname = "multi-threaded child process.";
thread_db_ops.to_doc = "Threads and pthreads support.";
+ thread_db_ops.to_attach = thread_db_attach;
thread_db_ops.to_detach = thread_db_detach;
thread_db_ops.to_resume = thread_db_resume;
thread_db_ops.to_wait = thread_db_wait;
thread_db_ops.to_pid_to_str = thread_db_pid_to_str;
thread_db_ops.to_stratum = thread_stratum;
thread_db_ops.to_has_thread_control = tc_schedlock;
+ thread_db_ops.to_get_thread_local_address
+ = thread_db_get_thread_local_address;
thread_db_ops.to_magic = OPS_MAGIC;
}