/* Top level stuff for GDB, the GNU debugger.
- Copyright 1986, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 1998
+ Copyright 1986, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 1999
Free Software Foundation, Inc.
-This file is part of GDB.
+ This file is part of GDB.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
#include "defs.h"
#include "gdbcmd.h"
#include "expression.h"
#include "value.h"
#include "language.h"
-#include "terminal.h" /* For job_control. */
+#include "terminal.h" /* For job_control. */
#include "annotate.h"
#include "top.h"
-#include "event-loop.h"
+#include "version.h"
/* readline include files */
#include <readline/readline.h>
#undef savestring
#include <sys/types.h>
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
+#include "event-loop.h"
+#include "event-top.h"
#include "gdb_string.h"
#include "gdb_stat.h"
#include <ctype.h>
static void stop_sig PARAMS ((int));
#endif
-static char * line_completion_function PARAMS ((char *, int, char *, int));
+static char *line_completion_function PARAMS ((char *, int, char *, int));
-static char * readline_line_completion_function PARAMS ((char *, int));
+static char *readline_line_completion_function PARAMS ((char *, int));
/* NOTE 1999-04-29: this function will be static again, after we make the
event loop be the default command loop for gdb, and we merge
static void if_command PARAMS ((char *, int));
static struct command_line *
-build_command_line PARAMS ((enum command_control_type, char *));
+ build_command_line PARAMS ((enum command_control_type, char *));
static struct command_line *
-get_command_line PARAMS ((enum command_control_type, char *));
+ get_command_line PARAMS ((enum command_control_type, char *));
static void realloc_body_list PARAMS ((struct command_line *, int));
static enum command_control_type
recurse_read_control_structure PARAMS ((struct command_line *));
-static struct cleanup * setup_user_args PARAMS ((char *));
+static struct cleanup *setup_user_args PARAMS ((char *));
-static char * locate_arg PARAMS ((char *));
+static char *locate_arg PARAMS ((char *));
-static char * insert_args PARAMS ((char *));
+static char *insert_args PARAMS ((char *));
static void arg_cleanup PARAMS ((void));
static void source_cleanup PARAMS ((FILE *));
-/* If this definition isn't overridden by the header files, assume
- that isatty and fileno exist on this system. */
-#ifndef ISATTY
-#define ISATTY(FP) (isatty (fileno (FP)))
+/* Default command line prompt. This is overriden in some configs. */
+
+#ifndef DEFAULT_PROMPT
+#define DEFAULT_PROMPT "(gdb) "
#endif
/* Initialization file name for gdb. This is overridden in some configs. */
int use_windows = 1;
-/* Version number of GDB, as a string. */
-
-extern char *version;
-
-/* Canonical host name as a string. */
-
-extern char *host_name;
-
-/* Canonical target name as a string. */
-
-extern char *target_name;
-
extern char lang_frame_mismatch_warn[]; /* language.c */
/* Flag for whether we want all the "from_tty" gubbish printed. */
-int caution = 1; /* Default is yes, sigh. */
+int caution = 1; /* Default is yes, sigh. */
/* Define all cmd_list_elements. */
int xgdb_verbose;
/* gdb prints this when reading a command interactively */
-static char *gdb_prompt_string; /* the global prompt string */
-extern char *get_prompt PARAMS((void)); /* access function for prompt string */
+static char *gdb_prompt_string; /* the global prompt string */
+extern char *get_prompt PARAMS ((void)); /* access function for prompt string */
/* Buffer used for reading command lines, and the size
allocated for it so far. */
int remote_debug = 0;
+/* Non-zero means the target is running. Note: this is different from
+ saying that there is an active target and we are stopped at a
+ breakpoint, for instance. This is a real indicator whether the
+ target is off and running, which gdb is doing something else. */
+int target_executing = 0;
+
/* Level of control structure. */
static int control_level;
/* Structure for arguments to user defined functions. */
#define MAXUSERARGS 10
struct user_args
-{
- struct user_args *next;
- struct
- {
- char *arg;
- int len;
- } a[MAXUSERARGS];
- int count;
-} *user_args;
+ {
+ struct user_args *next;
+ struct
+ {
+ char *arg;
+ int len;
+ }
+ a[MAXUSERARGS];
+ int count;
+ }
+ *user_args;
/* Signal to catch ^Z typed while reading a command: SIGTSTP or SIGCONT. */
/* Called instead of fputs for all output. */
-void (*fputs_unfiltered_hook) PARAMS ((const char *linebuffer, GDB_FILE *stream));
-
-/* Called when the target says something to the host, which may
- want to appear in a different window. */
-
-void (*target_output_hook) PARAMS ((char *));
+void (*fputs_unfiltered_hook) PARAMS ((const char *linebuffer, GDB_FILE * stream));
/* Called from print_frame_info to list the line we stopped in. */
-void (*print_frame_info_listing_hook) PARAMS ((struct symtab *s, int line,
+void (*print_frame_info_listing_hook) PARAMS ((struct symtab * s, int line,
int stopline, int noerror));
/* Replaces most of query. */
/* Called from gdb_flush to flush output. */
-void (*flush_hook) PARAMS ((GDB_FILE *stream));
+void (*flush_hook) PARAMS ((GDB_FILE * stream));
/* These three functions support getting lines of text from the user. They
are used in sequence. First readline_begin_hook is called with a text
to notify the GUI that we are done with the interaction window and it
can close it. */
-void (*readline_begin_hook) PARAMS ((char *, ...));
-char * (*readline_hook) PARAMS ((char *));
+void (*readline_begin_hook) PARAMS ((char *,...));
+char *(*readline_hook) PARAMS ((char *));
void (*readline_end_hook) PARAMS ((void));
/* Called as appropriate to notify the interface of the specified breakpoint
conditions. */
-void (*create_breakpoint_hook) PARAMS ((struct breakpoint *bpt));
-void (*delete_breakpoint_hook) PARAMS ((struct breakpoint *bpt));
-void (*modify_breakpoint_hook) PARAMS ((struct breakpoint *bpt));
+void (*create_breakpoint_hook) PARAMS ((struct breakpoint * bpt));
+void (*delete_breakpoint_hook) PARAMS ((struct breakpoint * bpt));
+void (*modify_breakpoint_hook) PARAMS ((struct breakpoint * bpt));
+
+/* Called as appropriate to notify the interface that we have attached
+ to or detached from an already running process. */
+
+void (*attach_hook) PARAMS ((void));
+void (*detach_hook) PARAMS ((void));
/* Called during long calculations to allow GUI to repair window damage, and to
check for stop buttons, etc... */
/* Tell the GUI someone changed the register REGNO. -1 means
that the caller does not know which register changed or
- that several registers have changed (see value_assign).*/
+ that several registers have changed (see value_assign). */
void (*register_changed_hook) PARAMS ((int regno));
/* Tell the GUI someone changed LEN bytes of memory at ADDR */
/* Called when going to wait for the target. Usually allows the GUI to run
while waiting for target events. */
-int (*target_wait_hook) PARAMS ((int pid, struct target_waitstatus *status));
+int (*target_wait_hook) PARAMS ((int pid, struct target_waitstatus * status));
/* Used by UI as a wrapper around command execution. May do various things
like enabling/disabling buttons, etc... */
-void (*call_command_hook) PARAMS ((struct cmd_list_element *c, char *cmd,
+void (*call_command_hook) PARAMS ((struct cmd_list_element * c, char *cmd,
int from_tty));
+/* Called after a `set' command has finished. Is only run if the
+ `set' command succeeded. */
+
+void (*set_hook) PARAMS ((struct cmd_list_element *c));
+
/* Called when the current thread changes. Argument is thread id. */
void (*context_hook) PARAMS ((int id));
/* Takes control from error (). Typically used to prevent longjmps out of the
middle of the GUI. Usually used in conjunction with a catch routine. */
-NORETURN void (*error_hook) PARAMS ((void)) ATTR_NORETURN;
-
+NORETURN void (*error_hook)
+PARAMS ((void)) ATTR_NORETURN;
\f
+
/* Where to go for return_to_top_level (RETURN_ERROR). */
-SIGJMP_BUF error_return;
+ SIGJMP_BUF error_return;
/* Where to go for return_to_top_level (RETURN_QUIT). */
-SIGJMP_BUF quit_return;
+ SIGJMP_BUF quit_return;
/* Return for reason REASON. This generally gets back to the command
loop, but can be caught via catch_errors. */
-NORETURN void
+ NORETURN void
return_to_top_level (reason)
enum return_reason reason;
{
/* Perhaps it would be cleaner to do this via the cleanup chain (not sure
I can think of a reason why that is vital, though). */
- bpstat_clear_actions(stop_bpstat); /* Clear queued breakpoint commands */
+ bpstat_clear_actions (stop_bpstat); /* Clear queued breakpoint commands */
disable_current_display ();
do_cleanups (ALL_CLEANUPS);
+ if (event_loop_p && target_can_async_p ())
+ do_exec_cleanups (ALL_CLEANUPS);
+ if (event_loop_p && sync_execution)
+ do_exec_error_cleanups (ALL_CLEANUPS);
if (annotation_level > 1)
switch (reason)
if (mask & RETURN_MASK_ERROR)
{
- memcpy ((char *)saved_error, (char *)error_return, sizeof (SIGJMP_BUF));
+ memcpy ((char *) saved_error, (char *) error_return, sizeof (SIGJMP_BUF));
error_pre_print = errstring;
}
if (mask & RETURN_MASK_QUIT)
#ifdef SIGHUP
static void
disconnect (signo)
-int signo;
+ int signo;
{
catch_errors (quit_cover, NULL,
- "Could not kill the program being debugged", RETURN_MASK_ALL);
+ "Could not kill the program being debugged", RETURN_MASK_ALL);
signal (SIGHUP, SIG_DFL);
kill (getpid (), SIGHUP);
}
quit_cover (s)
PTR s;
{
- caution = 0; /* Throw caution to the wind -- we're exiting.
- This prevents asking the user dumb questions. */
- quit_command((char *)0, 0);
+ caution = 0; /* Throw caution to the wind -- we're exiting.
+ This prevents asking the user dumb questions. */
+ quit_command ((char *) 0, 0);
return 0;
}
#endif /* defined SIGHUP */
cleanups = make_cleanup ((make_cleanup_func) source_cleanup, instream);
instream = stream;
- command_loop ();
+ command_loop ();
do_cleanups (cleanups);
}
\f
getcwd (gdb_dirbuf, sizeof (gdb_dirbuf));
current_directory = gdb_dirbuf;
- init_cmd_lists (); /* This needs to be done first */
- initialize_targets (); /* Setup target_terminal macros for utils.c */
- initialize_utils (); /* Make errors and warnings possible */
+#ifdef __MSDOS__
+ /* Make sure we return to the original directory upon exit, come
+ what may, since the OS doesn't do that for us. */
+ make_final_cleanup ((make_cleanup_func) chdir, strsave (current_directory));
+#endif
+
+ init_cmd_lists (); /* This needs to be done first */
+ initialize_targets (); /* Setup target_terminal macros for utils.c */
+ initialize_utils (); /* Make errors and warnings possible */
initialize_all_files ();
- init_main (); /* But that omits this file! Do it now */
+ init_main (); /* But that omits this file! Do it now */
/* The signal handling mechanism is different depending whether or
not the async version is run. NOTE: in the future we plan to make
the event loop be the default engine of gdb, and this difference
will disappear. */
- if (async_p)
+ if (event_loop_p)
async_init_signals ();
else
- init_signals ();
+ init_signals ();
/* We need a default language for parsing expressions, so simple things like
"set width 0" won't fail if no language is explicitly set in a config file
or implicitly set by reading an executable during startup. */
set_language (language_c);
- expected_language = current_language; /* don't warn about the change. */
+ expected_language = current_language; /* don't warn about the change. */
/* All the interpreters should have had a look at things by now.
Initialize the selected interpreter. */
if (args == NULL)
error ("if/while commands require arguments.\n");
- cmd = (struct command_line *)xmalloc (sizeof (struct command_line));
+ cmd = (struct command_line *) xmalloc (sizeof (struct command_line));
cmd->next = NULL;
cmd->control_type = type;
cmd->body_count = 1;
cmd->body_list
- = (struct command_line **)xmalloc (sizeof (struct command_line *)
- * cmd->body_count);
+ = (struct command_line **) xmalloc (sizeof (struct command_line *)
+ * cmd->body_count);
memset (cmd->body_list, 0, sizeof (struct command_line *) * cmd->body_count);
cmd->line = savestring (args, strlen (args));
return cmd;
/* Show the false arm if it exists. */
if (cmd->body_count == 2)
- {
- if (depth)
- {
- for (i = 0; i < depth; i++)
- fputs_filtered (" ", stream);
- }
- fputs_filtered ("else\n", stream);
- print_command_line (cmd->body_list[1], depth + 1, stream);
- }
+ {
+ if (depth)
+ {
+ for (i = 0; i < depth; i++)
+ fputs_filtered (" ", stream);
+ }
+ fputs_filtered ("else\n", stream);
+ print_command_line (cmd->body_list[1], depth + 1, stream);
+ }
if (depth)
{
for (i = 0; i < depth; i++)
new_line = insert_args (cmd->line);
if (!new_line)
return invalid_control;
- old_chain = make_cleanup ((make_cleanup_func) free_current_contents,
- &new_line);
+ old_chain = make_cleanup ((make_cleanup_func) free_current_contents,
+ &new_line);
execute_command (new_line, 0);
ret = cmd->control_type;
break;
case continue_control:
case break_control:
/* Return for "continue", and "break" so we can either
- continue the loop at the top, or break out. */
+ continue the loop at the top, or break out. */
ret = cmd->control_type;
break;
new_line = insert_args (cmd->line);
if (!new_line)
return invalid_control;
- old_chain = make_cleanup ((make_cleanup_func) free_current_contents,
- &new_line);
+ old_chain = make_cleanup ((make_cleanup_func) free_current_contents,
+ &new_line);
expr = parse_expression (new_line);
make_cleanup ((make_cleanup_func) free_current_contents, &expr);
-
+
ret = simple_control;
loop = 1;
at this point. */
if (ret == continue_control)
break;
-
+
/* Get the next statement. */
- current = current->next;
+ current = current->next;
}
}
new_line = insert_args (cmd->line);
if (!new_line)
return invalid_control;
- old_chain = make_cleanup ((make_cleanup_func) free_current_contents,
- &new_line);
+ old_chain = make_cleanup ((make_cleanup_func) free_current_contents,
+ &new_line);
/* Parse the conditional for the if statement. */
expr = parse_expression (new_line);
make_cleanup ((make_cleanup_func) free_current_contents, &expr);
{
struct user_args *oargs = user_args;
if (!user_args)
- fatal ("Internal error, arg_cleanup called with no user args.\n");
+ internal_error ("Internal error, arg_cleanup called with no user args.\n");
user_args = user_args->next;
free (oargs);
struct cleanup *old_chain;
unsigned int arg_count = 0;
- args = (struct user_args *)xmalloc (sizeof (struct user_args));
+ args = (struct user_args *) xmalloc (sizeof (struct user_args));
memset (args, 0, sizeof (struct user_args));
args->next = user_args;
{
len += p - line;
i = p[4] - '0';
-
+
if (i >= user_args->count)
{
error ("Missing argument %d in user function.\n", i);
len += strlen (line);
/* Allocate space for the new line and fill it in. */
- new_line = (char *)xmalloc (len + 1);
+ new_line = (char *) xmalloc (len + 1);
if (new_line == NULL)
return NULL;
/* This can happen when command_line_input hits end of file. */
if (p == NULL)
- return;
+ return;
serial_log_command (p);
- while (*p == ' ' || *p == '\t') p++;
+ while (*p == ' ' || *p == '\t')
+ p++;
if (*p)
{
char *arg;
c = lookup_cmd (&p, cmdlist, "", 0, 1);
+
+ /* If the target is running, we allow only a limited set of
+ commands. */
+ if (event_loop_p && target_can_async_p () && target_executing)
+ if (!strcmp (c->name, "help")
+ && !strcmp (c->name, "pwd")
+ && !strcmp (c->name, "show")
+ && !strcmp (c->name, "stop"))
+ error ("Cannot execute this command while the target is running.");
+
/* Pass null arg rather than an empty one. */
arg = *p ? p : 0;
/* If this command has been hooked, run the hook first. */
if (c->hook)
- execute_user_command (c->hook, (char *)0);
+ execute_user_command (c->hook, (char *) 0);
if (c->class == class_user)
execute_user_command (c, arg);
call_command_hook (c, arg, from_tty & caution);
else
(*c->function.cfunc) (arg, from_tty & caution);
- }
+ }
/* Tell the user if the language has changed (except first time). */
if (current_language != expected_language)
- {
- if (language_mode == language_mode_auto) {
- language_info (1); /* Print what changed. */
+ {
+ if (language_mode == language_mode_auto)
+ {
+ language_info (1); /* Print what changed. */
+ }
+ warned = 0;
}
- warned = 0;
- }
/* Warn the user if the working language does not match the
language of the current frame. Only warn the user if we are
insert_mode = 0;
#endif
/* Get a command-line. This calls the readline package. */
- command = command_line_input (instream == stdin ?
+ command = command_line_input (instream == stdin ?
get_prompt () : (char *) NULL,
instream == stdin, "prompt");
#if defined(TUI)
}
}
+\f
+/* Commands call this if they do not want to be repeated by null lines. */
+
+void
+dont_repeat ()
+{
+ if (server_command)
+ return;
+
+ /* If we aren't reading from standard input, we are saving the last
+ thing read from stdin in line and don't want to delete it. Null lines
+ won't repeat here in any case. */
+ if (instream == stdin)
+ *line = 0;
+}
+\f
+/* Read a line from the stream "instream" without command line editing.
+
+ It prints PROMPT_ARG once at the start.
+ Action is compatible with "readline", e.g. space for the result is
+ malloc'd and should be freed by the caller.
+
+ A NULL return means end of file. */
+char *
+gdb_readline (prompt_arg)
+ char *prompt_arg;
+{
+ int c;
+ char *result;
+ int input_index = 0;
+ int result_size = 80;
+
+ if (prompt_arg)
+ {
+ /* Don't use a _filtered function here. It causes the assumed
+ character position to be off, since the newline we read from
+ the user is not accounted for. */
+ fputs_unfiltered (prompt_arg, gdb_stdout);
+#ifdef MPW
+ /* Move to a new line so the entered line doesn't have a prompt
+ on the front of it. */
+ fputs_unfiltered ("\n", gdb_stdout);
+#endif /* MPW */
+ gdb_flush (gdb_stdout);
+ }
+
+ result = (char *) xmalloc (result_size);
+
+ while (1)
+ {
+ /* Read from stdin if we are executing a user defined command.
+ This is the right thing for prompt_for_continue, at least. */
+ c = fgetc (instream ? instream : stdin);
+
+ if (c == EOF)
+ {
+ if (input_index > 0)
+ /* The last line does not end with a newline. Return it, and
+ if we are called again fgetc will still return EOF and
+ we'll return NULL then. */
+ break;
+ free (result);
+ return NULL;
+ }
+
+ if (c == '\n')
+#ifndef CRLF_SOURCE_FILES
+ break;
+#else
+ {
+ if (input_index > 0 && result[input_index - 1] == '\r')
+ input_index--;
+ break;
+ }
+#endif
+
+ result[input_index++] = c;
+ while (input_index >= result_size)
+ {
+ result_size *= 2;
+ result = (char *) xrealloc (result, result_size);
+ }
+ }
+
+ result[input_index++] = '\0';
+ return result;
+}
+
+/* Variables which control command line editing and history
+ substitution. These variables are given default values at the end
+ of this file. */
+static int command_editing_p;
+/* NOTE 1999-04-29: This variable will be static again, once we modify
+ gdb to use the event loop as the default command loop and we merge
+ event-top.c into this file, top.c */
+/* static */ int history_expansion_p;
+static int write_history_p;
+static int history_size;
+static char *history_filename;
+
+/* readline uses the word breaks for two things:
+ (1) In figuring out where to point the TEXT parameter to the
+ rl_completion_entry_function. Since we don't use TEXT for much,
+ it doesn't matter a lot what the word breaks are for this purpose, but
+ it does affect how much stuff M-? lists.
+ (2) If one of the matches contains a word break character, readline
+ will quote it. That's why we switch between
+ gdb_completer_word_break_characters and
+ gdb_completer_command_word_break_characters. I'm not sure when
+ we need this behavior (perhaps for funky characters in C++ symbols?). */
+
+/* Variables which are necessary for fancy command line editing. */
+char *gdb_completer_word_break_characters =
+" \t\n!@#$%^&*()+=|~`}{[]\"';:?/>.<,-";
+
+/* When completing on command names, we remove '-' from the list of
+ word break characters, since we use it in command names. If the
+ readline library sees one in any of the current completion strings,
+ it thinks that the string needs to be quoted and automatically supplies
+ a leading quote. */
+char *gdb_completer_command_word_break_characters =
+" \t\n!@#$%^&*()+=|~`}{[]\"';:?/>.<,";
+
+/* Characters that can be used to quote completion strings. Note that we
+ can't include '"' because the gdb C parser treats such quoted sequences
+ as strings. */
+char *gdb_completer_quote_characters =
+"'";
+
+/* Functions that are used as part of the fancy command line editing. */
+
+/* This can be used for functions which don't want to complete on symbols
+ but don't want to complete on anything else either. */
+/* ARGSUSED */
+char **
+noop_completer (text, prefix)
+ char *text;
+ char *prefix;
+{
+ return NULL;
+}
+
+/* Complete on filenames. */
+char **
+filename_completer (text, word)
+ char *text;
+ char *word;
+{
+ /* From readline. */
+ extern char *filename_completion_function PARAMS ((char *, int));
+ int subsequent_name;
+ char **return_val;
+ int return_val_used;
+ int return_val_alloced;
+
+ return_val_used = 0;
+ /* Small for testing. */
+ return_val_alloced = 1;
+ return_val = (char **) xmalloc (return_val_alloced * sizeof (char *));
+
+ subsequent_name = 0;
+ while (1)
+ {
+ char *p;
+ p = filename_completion_function (text, subsequent_name);
+ if (return_val_used >= return_val_alloced)
+ {
+ return_val_alloced *= 2;
+ return_val =
+ (char **) xrealloc (return_val,
+ return_val_alloced * sizeof (char *));
+ }
+ if (p == NULL)
+ {
+ return_val[return_val_used++] = p;
+ break;
+ }
+ /* Like emacs, don't complete on old versions. Especially useful
+ in the "source" command. */
+ if (p[strlen (p) - 1] == '~')
+ continue;
+
+ {
+ char *q;
+ if (word == text)
+ /* Return exactly p. */
+ return_val[return_val_used++] = p;
+ else if (word > text)
+ {
+ /* Return some portion of p. */
+ q = xmalloc (strlen (p) + 5);
+ strcpy (q, p + (word - text));
+ return_val[return_val_used++] = q;
+ free (p);
+ }
+ else
+ {
+ /* Return some of TEXT plus p. */
+ q = xmalloc (strlen (p) + (text - word) + 5);
+ strncpy (q, word, text - word);
+ q[text - word] = '\0';
+ strcat (q, p);
+ return_val[return_val_used++] = q;
+ free (p);
+ }
+ }
+ subsequent_name = 1;
+ }
+#if 0
+ /* There is no way to do this just long enough to affect quote inserting
+ without also affecting the next completion. This should be fixed in
+ readline. FIXME. */
+ /* Insure that readline does the right thing
+ with respect to inserting quotes. */
+ rl_completer_word_break_characters = "";
+#endif
+ return return_val;
+}
+
+/* Here are some useful test cases for completion. FIXME: These should
+ be put in the test suite. They should be tested with both M-? and TAB.
+
+ "show output-" "radix"
+ "show output" "-radix"
+ "p" ambiguous (commands starting with p--path, print, printf, etc.)
+ "p " ambiguous (all symbols)
+ "info t foo" no completions
+ "info t " no completions
+ "info t" ambiguous ("info target", "info terminal", etc.)
+ "info ajksdlfk" no completions
+ "info ajksdlfk " no completions
+ "info" " "
+ "info " ambiguous (all info commands)
+ "p \"a" no completions (string constant)
+ "p 'a" ambiguous (all symbols starting with a)
+ "p b-a" ambiguous (all symbols starting with a)
+ "p b-" ambiguous (all symbols)
+ "file Make" "file" (word break hard to screw up here)
+ "file ../gdb.stabs/we" "ird" (needs to not break word at slash)
+ */
+
+/* Generate completions one by one for the completer. Each time we are
+ called return another potential completion to the caller.
+ line_completion just completes on commands or passes the buck to the
+ command's completer function, the stuff specific to symbol completion
+ is in make_symbol_completion_list.
+
+ TEXT is the caller's idea of the "word" we are looking at.
+
+ MATCHES is the number of matches that have currently been collected from
+ calling this completion function. When zero, then we need to initialize,
+ otherwise the initialization has already taken place and we can just
+ return the next potential completion string.
+
+ LINE_BUFFER is available to be looked at; it contains the entire text
+ of the line. POINT is the offset in that line of the cursor. You
+ should pretend that the line ends at POINT.
+
+ Returns NULL if there are no more completions, else a pointer to a string
+ which is a possible completion, it is the caller's responsibility to
+ free the string. */
+
+static char *
+line_completion_function (text, matches, line_buffer, point)
+ char *text;
+ int matches;
+ char *line_buffer;
+ int point;
+{
+ static char **list = (char **) NULL; /* Cache of completions */
+ static int index; /* Next cached completion */
+ char *output = NULL;
+ char *tmp_command, *p;
+ /* Pointer within tmp_command which corresponds to text. */
+ char *word;
+ struct cmd_list_element *c, *result_list;
+
+ if (matches == 0)
+ {
+ /* The caller is beginning to accumulate a new set of completions, so
+ we need to find all of them now, and cache them for returning one at
+ a time on future calls. */
+
+ if (list)
+ {
+ /* Free the storage used by LIST, but not by the strings inside.
+ This is because rl_complete_internal () frees the strings. */
+ free ((PTR) list);
+ }
+ list = 0;
+ index = 0;
+
+ /* Choose the default set of word break characters to break completions.
+ If we later find out that we are doing completions on command strings
+ (as opposed to strings supplied by the individual command completer
+ functions, which can be any string) then we will switch to the
+ special word break set for command strings, which leaves out the
+ '-' character used in some commands. */
+
+ rl_completer_word_break_characters =
+ gdb_completer_word_break_characters;
+
+ /* Decide whether to complete on a list of gdb commands or on symbols. */
+ tmp_command = (char *) alloca (point + 1);
+ p = tmp_command;
+
+ strncpy (tmp_command, line_buffer, point);
+ tmp_command[point] = '\0';
+ /* Since text always contains some number of characters leading up
+ to point, we can find the equivalent position in tmp_command
+ by subtracting that many characters from the end of tmp_command. */
+ word = tmp_command + point - strlen (text);
+
+ if (point == 0)
+ {
+ /* An empty line we want to consider ambiguous; that is, it
+ could be any command. */
+ c = (struct cmd_list_element *) -1;
+ result_list = 0;
+ }
+ else
+ {
+ c = lookup_cmd_1 (&p, cmdlist, &result_list, 1);
+ }
+
+ /* Move p up to the next interesting thing. */
+ while (*p == ' ' || *p == '\t')
+ {
+ p++;
+ }
+
+ if (!c)
+ {
+ /* It is an unrecognized command. So there are no
+ possible completions. */
+ list = NULL;
+ }
+ else if (c == (struct cmd_list_element *) -1)
+ {
+ char *q;
+
+ /* lookup_cmd_1 advances p up to the first ambiguous thing, but
+ doesn't advance over that thing itself. Do so now. */
+ q = p;
+ while (*q && (isalnum (*q) || *q == '-' || *q == '_'))
+ ++q;
+ if (q != tmp_command + point)
+ {
+ /* There is something beyond the ambiguous
+ command, so there are no possible completions. For
+ example, "info t " or "info t foo" does not complete
+ to anything, because "info t" can be "info target" or
+ "info terminal". */
+ list = NULL;
+ }
+ else
+ {
+ /* We're trying to complete on the command which was ambiguous.
+ This we can deal with. */
+ if (result_list)
+ {
+ list = complete_on_cmdlist (*result_list->prefixlist, p,
+ word);
+ }
+ else
+ {
+ list = complete_on_cmdlist (cmdlist, p, word);
+ }
+ /* Insure that readline does the right thing with respect to
+ inserting quotes. */
+ rl_completer_word_break_characters =
+ gdb_completer_command_word_break_characters;
+ }
+ }
+ else
+ {
+ /* We've recognized a full command. */
+
+ if (p == tmp_command + point)
+ {
+ /* There is no non-whitespace in the line beyond the command. */
+
+ if (p[-1] == ' ' || p[-1] == '\t')
+ {
+ /* The command is followed by whitespace; we need to complete
+ on whatever comes after command. */
+ if (c->prefixlist)
+ {
+ /* It is a prefix command; what comes after it is
+ a subcommand (e.g. "info "). */
+ list = complete_on_cmdlist (*c->prefixlist, p, word);
+
+ /* Insure that readline does the right thing
+ with respect to inserting quotes. */
+ rl_completer_word_break_characters =
+ gdb_completer_command_word_break_characters;
+ }
+ else if (c->enums)
+ {
+ list = complete_on_enum (c->enums, p, word);
+ rl_completer_word_break_characters =
+ gdb_completer_command_word_break_characters;
+ }
+ else
+ {
+ /* It is a normal command; what comes after it is
+ completed by the command's completer function. */
+ list = (*c->completer) (p, word);
+ }
+ }
+ else
+ {
+ /* The command is not followed by whitespace; we need to
+ complete on the command itself. e.g. "p" which is a
+ command itself but also can complete to "print", "ptype"
+ etc. */
+ char *q;
+
+ /* Find the command we are completing on. */
+ q = p;
+ while (q > tmp_command)
+ {
+ if (isalnum (q[-1]) || q[-1] == '-' || q[-1] == '_')
+ --q;
+ else
+ break;
+ }
+
+ list = complete_on_cmdlist (result_list, q, word);
+
+ /* Insure that readline does the right thing
+ with respect to inserting quotes. */
+ rl_completer_word_break_characters =
+ gdb_completer_command_word_break_characters;
+ }
+ }
+ else
+ {
+ /* There is non-whitespace beyond the command. */
+
+ if (c->prefixlist && !c->allow_unknown)
+ {
+ /* It is an unrecognized subcommand of a prefix command,
+ e.g. "info adsfkdj". */
+ list = NULL;
+ }
+ else if (c->enums)
+ {
+ list = complete_on_enum (c->enums, p, word);
+ }
+ else
+ {
+ /* It is a normal command. */
+ list = (*c->completer) (p, word);
+ }
+ }
+ }
+ }
+
+ /* If we found a list of potential completions during initialization then
+ dole them out one at a time. The vector of completions is NULL
+ terminated, so after returning the last one, return NULL (and continue
+ to do so) each time we are called after that, until a new list is
+ available. */
+
+ if (list)
+ {
+ output = list[index];
+ if (output)
+ {
+ index++;
+ }
+ }
+
+#if 0
+ /* Can't do this because readline hasn't yet checked the word breaks
+ for figuring out whether to insert a quote. */
+ if (output == NULL)
+ /* Make sure the word break characters are set back to normal for the
+ next time that readline tries to complete something. */
+ rl_completer_word_break_characters =
+ gdb_completer_word_break_characters;
+#endif
+
+ return (output);
+}
+
+/* Line completion interface function for readline. */
+
+static char *
+readline_line_completion_function (text, matches)
+ char *text;
+ int matches;
+{
+ return line_completion_function (text, matches, rl_line_buffer, rl_point);
+}
+
+/* Skip over a possibly quoted word (as defined by the quote characters
+ and word break characters the completer uses). Returns pointer to the
+ location after the "word". */
+
+char *
+skip_quoted (str)
+ char *str;
+{
+ char quote_char = '\0';
+ char *scan;
+
+ for (scan = str; *scan != '\0'; scan++)
+ {
+ if (quote_char != '\0')
+ {
+ /* Ignore everything until the matching close quote char */
+ if (*scan == quote_char)
+ {
+ /* Found matching close quote. */
+ scan++;
+ break;
+ }
+ }
+ else if (strchr (gdb_completer_quote_characters, *scan))
+ {
+ /* Found start of a quoted string. */
+ quote_char = *scan;
+ }
+ else if (strchr (gdb_completer_word_break_characters, *scan))
+ {
+ break;
+ }
+ }
+ return (scan);
+}
+\f
+
+#ifdef STOP_SIGNAL
+static void
+stop_sig (signo)
+ int signo;
+{
+#if STOP_SIGNAL == SIGTSTP
+ signal (SIGTSTP, SIG_DFL);
+ sigsetmask (0);
+ kill (getpid (), SIGTSTP);
+ signal (SIGTSTP, stop_sig);
+#else
+ signal (STOP_SIGNAL, stop_sig);
+#endif
+ printf_unfiltered ("%s", get_prompt ());
+ gdb_flush (gdb_stdout);
+
+ /* Forget about any previous command -- null line now will do nothing. */
+ dont_repeat ();
+}
+#endif /* STOP_SIGNAL */
+
+/* Initialize signal handlers. */
+static void
+do_nothing (signo)
+ int signo;
+{
+ /* Under System V the default disposition of a signal is reinstated after
+ the signal is caught and delivered to an application process. On such
+ systems one must restore the replacement signal handler if one wishes
+ to continue handling the signal in one's program. On BSD systems this
+ is not needed but it is harmless, and it simplifies the code to just do
+ it unconditionally. */
+ signal (signo, do_nothing);
+}
+
+static void
+init_signals ()
+{
+ signal (SIGINT, request_quit);
+
+ /* If SIGTRAP was set to SIG_IGN, then the SIG_IGN will get passed
+ to the inferior and breakpoints will be ignored. */
+#ifdef SIGTRAP
+ signal (SIGTRAP, SIG_DFL);
+#endif
+
+ /* If we initialize SIGQUIT to SIG_IGN, then the SIG_IGN will get
+ passed to the inferior, which we don't want. It would be
+ possible to do a "signal (SIGQUIT, SIG_DFL)" after we fork, but
+ on BSD4.3 systems using vfork, that can affect the
+ GDB process as well as the inferior (the signal handling tables
+ might be in memory, shared between the two). Since we establish
+ a handler for SIGQUIT, when we call exec it will set the signal
+ to SIG_DFL for us. */
+ signal (SIGQUIT, do_nothing);
+#ifdef SIGHUP
+ if (signal (SIGHUP, do_nothing) != SIG_IGN)
+ signal (SIGHUP, disconnect);
+#endif
+ signal (SIGFPE, float_handler);
+
+#if defined(SIGWINCH) && defined(SIGWINCH_HANDLER)
+ signal (SIGWINCH, SIGWINCH_HANDLER);
+#endif
+}
+\f
+/* Read one line from the command input stream `instream'
+ into the local static buffer `linebuffer' (whose current length
+ is `linelength').
+ The buffer is made bigger as necessary.
+ Returns the address of the start of the line.
+
+ NULL is returned for end of file.
+
+ *If* the instream == stdin & stdin is a terminal, the line read
+ is copied into the file line saver (global var char *line,
+ length linesize) so that it can be duplicated.
+
+ This routine either uses fancy command line editing or
+ simple input as the user has requested. */
+
+char *
+command_line_input (prompt_arg, repeat, annotation_suffix)
+ char *prompt_arg;
+ int repeat;
+ char *annotation_suffix;
+{
+ static char *linebuffer = 0;
+ static unsigned linelength = 0;
+ register char *p;
+ char *p1;
+ char *rl;
+ char *local_prompt = prompt_arg;
+ char *nline;
+ char got_eof = 0;
+
+ /* The annotation suffix must be non-NULL. */
+ if (annotation_suffix == NULL)
+ annotation_suffix = "";
+
+ if (annotation_level > 1 && instream == stdin)
+ {
+ local_prompt = alloca ((prompt_arg == NULL ? 0 : strlen (prompt_arg))
+ + strlen (annotation_suffix) + 40);
+ if (prompt_arg == NULL)
+ local_prompt[0] = '\0';
+ else
+ strcpy (local_prompt, prompt_arg);
+ strcat (local_prompt, "\n\032\032");
+ strcat (local_prompt, annotation_suffix);
+ strcat (local_prompt, "\n");
+ }
+
+ if (linebuffer == 0)
+ {
+ linelength = 80;
+ linebuffer = (char *) xmalloc (linelength);
+ }
+
+ p = linebuffer;
+
+ /* Control-C quits instantly if typed while in this loop
+ since it should not wait until the user types a newline. */
+ immediate_quit++;
+#ifdef STOP_SIGNAL
+ if (job_control)
+ {
+ if (event_loop_p)
+ signal (STOP_SIGNAL, handle_stop_sig);
+ else
+ signal (STOP_SIGNAL, stop_sig);
+ }
+#endif
+
+ while (1)
+ {
+ /* Make sure that all output has been output. Some machines may let
+ you get away with leaving out some of the gdb_flush, but not all. */
+ wrap_here ("");
+ gdb_flush (gdb_stdout);
+ gdb_flush (gdb_stderr);
+
+ if (source_file_name != NULL)
+ {
+ ++source_line_number;
+ sprintf (source_error,
+ "%s%s:%d: Error in sourced command file:\n",
+ source_pre_error,
+ source_file_name,
+ source_line_number);
+ error_pre_print = source_error;
+ }
+
+ if (annotation_level > 1 && instream == stdin)
+ {
+ printf_unfiltered ("\n\032\032pre-");
+ printf_unfiltered (annotation_suffix);
+ printf_unfiltered ("\n");
+ }
+
+ /* Don't use fancy stuff if not talking to stdin. */
+ if (readline_hook && instream == NULL)
+ {
+ rl = (*readline_hook) (local_prompt);
+ }
+ else if (command_editing_p && instream == stdin && ISATTY (instream))
+ {
+ rl = readline (local_prompt);
+ }
+ else
+ {
+ rl = gdb_readline (local_prompt);
+ }
+
+ if (annotation_level > 1 && instream == stdin)
+ {
+ printf_unfiltered ("\n\032\032post-");
+ printf_unfiltered (annotation_suffix);
+ printf_unfiltered ("\n");
+ }
+
+ if (!rl || rl == (char *) EOF)
+ {
+ got_eof = 1;
+ break;
+ }
+ if (strlen (rl) + 1 + (p - linebuffer) > linelength)
+ {
+ linelength = strlen (rl) + 1 + (p - linebuffer);
+ nline = (char *) xrealloc (linebuffer, linelength);
+ p += nline - linebuffer;
+ linebuffer = nline;
+ }
+ p1 = rl;
+ /* Copy line. Don't copy null at end. (Leaves line alone
+ if this was just a newline) */
+ while (*p1)
+ *p++ = *p1++;
+
+ free (rl); /* Allocated in readline. */
+
+ if (p == linebuffer || *(p - 1) != '\\')
+ break;
+
+ p--; /* Put on top of '\'. */
+ local_prompt = (char *) 0;
+ }
+
+#ifdef STOP_SIGNAL
+ if (job_control)
+ signal (STOP_SIGNAL, SIG_DFL);
+#endif
+ immediate_quit--;
+
+ if (got_eof)
+ return NULL;
+
+#define SERVER_COMMAND_LENGTH 7
+ server_command =
+ (p - linebuffer > SERVER_COMMAND_LENGTH)
+ && STREQN (linebuffer, "server ", SERVER_COMMAND_LENGTH);
+ if (server_command)
+ {
+ /* Note that we don't set `line'. Between this and the check in
+ dont_repeat, this insures that repeating will still do the
+ right thing. */
+ *p = '\0';
+ return linebuffer + SERVER_COMMAND_LENGTH;
+ }
+
+ /* Do history expansion if that is wished. */
+ if (history_expansion_p && instream == stdin
+ && ISATTY (instream))
+ {
+ char *history_value;
+ int expanded;
+
+ *p = '\0'; /* Insert null now. */
+ expanded = history_expand (linebuffer, &history_value);
+ if (expanded)
+ {
+ /* Print the changes. */
+ printf_unfiltered ("%s\n", history_value);
+
+ /* If there was an error, call this function again. */
+ if (expanded < 0)
+ {
+ free (history_value);
+ return command_line_input (prompt_arg, repeat, annotation_suffix);
+ }
+ if (strlen (history_value) > linelength)
+ {
+ linelength = strlen (history_value) + 1;
+ linebuffer = (char *) xrealloc (linebuffer, linelength);
+ }
+ strcpy (linebuffer, history_value);
+ p = linebuffer + strlen (linebuffer);
+ free (history_value);
+ }
+ }
+
+ /* If we just got an empty line, and that is supposed
+ to repeat the previous command, return the value in the
+ global buffer. */
+ if (repeat && p == linebuffer)
+ return line;
+ for (p1 = linebuffer; *p1 == ' ' || *p1 == '\t'; p1++);
+ if (repeat && !*p1)
+ return line;
+
+ *p = 0;
+
+ /* Add line to history if appropriate. */
+ if (instream == stdin
+ && ISATTY (stdin) && *linebuffer)
+ add_history (linebuffer);
+
+ /* Note: lines consisting solely of comments are added to the command
+ history. This is useful when you type a command, and then
+ realize you don't want to execute it quite yet. You can comment
+ out the command and then later fetch it from the value history
+ and remove the '#'. The kill ring is probably better, but some
+ people are in the habit of commenting things out. */
+ if (*p1 == '#')
+ *p1 = '\0'; /* Found a comment. */
+
+ /* Save into global buffer if appropriate. */
+ if (repeat)
+ {
+ if (linelength > linesize)
+ {
+ line = xrealloc (line, linelength);
+ linesize = linelength;
+ }
+ strcpy (line, linebuffer);
+ return line;
+ }
+
+ return linebuffer;
+}
+\f
+
+/* Expand the body_list of COMMAND so that it can hold NEW_LENGTH
+ code bodies. This is typically used when we encounter an "else"
+ clause for an "if" command. */
+
+static void
+realloc_body_list (command, new_length)
+ struct command_line *command;
+ int new_length;
+{
+ int n;
+ struct command_line **body_list;
+
+ n = command->body_count;
+
+ /* Nothing to do? */
+ if (new_length <= n)
+ return;
+
+ body_list = (struct command_line **)
+ xmalloc (sizeof (struct command_line *) * new_length);
+
+ memcpy (body_list, command->body_list, sizeof (struct command_line *) * n);
+
+ free (command->body_list);
+ command->body_list = body_list;
+ command->body_count = new_length;
+}
+
+/* Read one line from the input stream. If the command is an "else" or
+ "end", return such an indication to the caller. */
+
+static enum misc_command_type
+read_next_line (command)
+ struct command_line **command;
+{
+ char *p, *p1, *prompt_ptr, control_prompt[256];
+ int i = 0;
+
+ if (control_level >= 254)
+ error ("Control nesting too deep!\n");
+
+ /* Set a prompt based on the nesting of the control commands. */
+ if (instream == stdin || (instream == 0 && readline_hook != NULL))
+ {
+ for (i = 0; i < control_level; i++)
+ control_prompt[i] = ' ';
+ control_prompt[i] = '>';
+ control_prompt[i + 1] = '\0';
+ prompt_ptr = (char *) &control_prompt[0];
+ }
+ else
+ prompt_ptr = NULL;
+
+ p = command_line_input (prompt_ptr, instream == stdin, "commands");
+
+ /* Not sure what to do here. */
+ if (p == NULL)
+ return end_command;
+
+ /* Strip leading and trailing whitespace. */
+ while (*p == ' ' || *p == '\t')
+ p++;
+
+ p1 = p + strlen (p);
+ while (p1 != p && (p1[-1] == ' ' || p1[-1] == '\t'))
+ p1--;
+
+ /* Blanks and comments don't really do anything, but we need to
+ distinguish them from else, end and other commands which can be
+ executed. */
+ if (p1 == p || p[0] == '#')
+ return nop_command;
+
+ /* Is this the end of a simple, while, or if control structure? */
+ if (p1 - p == 3 && !strncmp (p, "end", 3))
+ return end_command;
+
+ /* Is the else clause of an if control structure? */
+ if (p1 - p == 4 && !strncmp (p, "else", 4))
+ return else_command;
+
+ /* Check for while, if, break, continue, etc and build a new command
+ line structure for them. */
+ if (p1 - p > 5 && !strncmp (p, "while", 5))
+ *command = build_command_line (while_control, p + 6);
+ else if (p1 - p > 2 && !strncmp (p, "if", 2))
+ *command = build_command_line (if_control, p + 3);
+ else if (p1 - p == 10 && !strncmp (p, "loop_break", 10))
+ {
+ *command = (struct command_line *)
+ xmalloc (sizeof (struct command_line));
+ (*command)->next = NULL;
+ (*command)->line = NULL;
+ (*command)->control_type = break_control;
+ (*command)->body_count = 0;
+ (*command)->body_list = NULL;
+ }
+ else if (p1 - p == 13 && !strncmp (p, "loop_continue", 13))
+ {
+ *command = (struct command_line *)
+ xmalloc (sizeof (struct command_line));
+ (*command)->next = NULL;
+ (*command)->line = NULL;
+ (*command)->control_type = continue_control;
+ (*command)->body_count = 0;
+ (*command)->body_list = NULL;
+ }
+ else
+ {
+ /* A normal command. */
+ *command = (struct command_line *)
+ xmalloc (sizeof (struct command_line));
+ (*command)->next = NULL;
+ (*command)->line = savestring (p, p1 - p);
+ (*command)->control_type = simple_control;
+ (*command)->body_count = 0;
+ (*command)->body_list = NULL;
+ }
+
+ /* Nothing special. */
+ return ok_command;
+}
+
+/* Recursively read in the control structures and create a command_line
+ structure from them.
+
+ The parent_control parameter is the control structure in which the
+ following commands are nested. */
+
+static enum command_control_type
+recurse_read_control_structure (current_cmd)
+ struct command_line *current_cmd;
+{
+ int current_body, i;
+ enum misc_command_type val;
+ enum command_control_type ret;
+ struct command_line **body_ptr, *child_tail, *next;
+
+ child_tail = NULL;
+ current_body = 1;
+
+ /* Sanity checks. */
+ if (current_cmd->control_type == simple_control)
+ {
+ error ("Recursed on a simple control type\n");
+ return invalid_control;
+ }
+
+ if (current_body > current_cmd->body_count)
+ {
+ error ("Allocated body is smaller than this command type needs\n");
+ return invalid_control;
+ }
+
+ /* Read lines from the input stream and build control structures. */
+ while (1)
+ {
+ dont_repeat ();
+
+ next = NULL;
+ val = read_next_line (&next);
+
+ /* Just skip blanks and comments. */
+ if (val == nop_command)
+ continue;
+
+ if (val == end_command)
+ {
+ if (current_cmd->control_type == while_control
+ || current_cmd->control_type == if_control)
+ {
+ /* Success reading an entire control structure. */
+ ret = simple_control;
+ break;
+ }
+ else
+ {
+ ret = invalid_control;
+ break;
+ }
+ }
+
+ /* Not the end of a control structure. */
+ if (val == else_command)
+ {
+ if (current_cmd->control_type == if_control
+ && current_body == 1)
+ {
+ realloc_body_list (current_cmd, 2);
+ current_body = 2;
+ child_tail = NULL;
+ continue;
+ }
+ else
+ {
+ ret = invalid_control;
+ break;
+ }
+ }
+
+ if (child_tail)
+ {
+ child_tail->next = next;
+ }
+ else
+ {
+ body_ptr = current_cmd->body_list;
+ for (i = 1; i < current_body; i++)
+ body_ptr++;
+
+ *body_ptr = next;
+
+ }
+
+ child_tail = next;
+
+ /* If the latest line is another control structure, then recurse
+ on it. */
+ if (next->control_type == while_control
+ || next->control_type == if_control)
+ {
+ control_level++;
+ ret = recurse_read_control_structure (next);
+ control_level--;
+
+ if (ret != simple_control)
+ break;
+ }
+ }
+
+ dont_repeat ();
+
+ return ret;
+}
+
+/* Read lines from the input stream and accumulate them in a chain of
+ struct command_line's, which is then returned. For input from a
+ terminal, the special command "end" is used to mark the end of the
+ input, and is not included in the returned chain of commands. */
+
+#define END_MESSAGE "End with a line saying just \"end\"."
+
+struct command_line *
+read_command_lines (prompt_arg, from_tty)
+ char *prompt_arg;
+ int from_tty;
+{
+ struct command_line *head, *tail, *next;
+ struct cleanup *old_chain;
+ enum command_control_type ret;
+ enum misc_command_type val;
+
+ control_level = 0;
+ if (readline_begin_hook)
+ {
+ /* Note - intentional to merge messages with no newline */
+ (*readline_begin_hook) ("%s %s\n", prompt_arg, END_MESSAGE);
+ }
+ else if (from_tty && input_from_terminal_p ())
+ {
+ printf_unfiltered ("%s\n%s\n", prompt_arg, END_MESSAGE);
+ gdb_flush (gdb_stdout);
+ }
+
+ head = tail = NULL;
+ old_chain = NULL;
+
+ while (1)
+ {
+ val = read_next_line (&next);
+
+ /* Ignore blank lines or comments. */
+ if (val == nop_command)
+ continue;
+
+ if (val == end_command)
+ {
+ ret = simple_control;
+ break;
+ }
+
+ if (val != ok_command)
+ {
+ ret = invalid_control;
+ break;
+ }
+
+ if (next->control_type == while_control
+ || next->control_type == if_control)
+ {
+ control_level++;
+ ret = recurse_read_control_structure (next);
+ control_level--;
+
+ if (ret == invalid_control)
+ break;
+ }
+
+ if (tail)
+ {
+ tail->next = next;
+ }
+ else
+ {
+ head = next;
+ old_chain = make_cleanup ((make_cleanup_func) free_command_lines,
+ &head);
+ }
+ tail = next;
+ }
+
+ dont_repeat ();
+
+ if (head)
+ {
+ if (ret != invalid_control)
+ {
+ discard_cleanups (old_chain);
+ }
+ else
+ do_cleanups (old_chain);
+ }
+
+ if (readline_end_hook)
+ {
+ (*readline_end_hook) ();
+ }
+ return (head);
+}
+
+/* Free a chain of struct command_line's. */
+
+void
+free_command_lines (lptr)
+ struct command_line **lptr;
+{
+ register struct command_line *l = *lptr;
+ register struct command_line *next;
+ struct command_line **blist;
+ int i;
+
+ while (l)
+ {
+ if (l->body_count > 0)
+ {
+ blist = l->body_list;
+ for (i = 0; i < l->body_count; i++, blist++)
+ free_command_lines (blist);
+ }
+ next = l->next;
+ free (l->line);
+ free ((PTR) l);
+ l = next;
+ }
+}
+\f
+/* Add an element to the list of info subcommands. */
+
+void
+add_info (name, fun, doc)
+ char *name;
+ void (*fun) PARAMS ((char *, int));
+ char *doc;
+{
+ add_cmd (name, no_class, fun, doc, &infolist);
+}
+
+/* Add an alias to the list of info subcommands. */
+
+void
+add_info_alias (name, oldname, abbrev_flag)
+ char *name;
+ char *oldname;
+ int abbrev_flag;
+{
+ add_alias_cmd (name, oldname, 0, abbrev_flag, &infolist);
+}
+
+/* The "info" command is defined as a prefix, with allow_unknown = 0.
+ Therefore, its own definition is called only for "info" with no args. */
+
+/* ARGSUSED */
+static void
+info_command (arg, from_tty)
+ char *arg;
+ int from_tty;
+{
+ printf_unfiltered ("\"info\" must be followed by the name of an info command.\n");
+ help_list (infolist, "info ", -1, gdb_stdout);
+}
+
+/* The "complete" command is used by Emacs to implement completion. */
+
+/* ARGSUSED */
+static void
+complete_command (arg, from_tty)
+ char *arg;
+ int from_tty;
+{
+ int i;
+ int argpoint;
+ char *completion;
+
+ dont_repeat ();
+
+ if (arg == NULL)
+ arg = "";
+ argpoint = strlen (arg);
+
+ for (completion = line_completion_function (arg, i = 0, arg, argpoint);
+ completion;
+ completion = line_completion_function (arg, ++i, arg, argpoint))
+ {
+ printf_unfiltered ("%s\n", completion);
+ free (completion);
+ }
+}
+
+/* The "show" command with no arguments shows all the settings. */
+
+/* ARGSUSED */
+static void
+show_command (arg, from_tty)
+ char *arg;
+ int from_tty;
+{
+ cmd_show_list (showlist, from_tty, "");
+}
+\f
+/* Add an element to the list of commands. */
+
+void
+add_com (name, class, fun, doc)
+ char *name;
+ enum command_class class;
+ void (*fun) PARAMS ((char *, int));
+ char *doc;
+{
+ add_cmd (name, class, fun, doc, &cmdlist);
+}
+
+/* Add an alias or abbreviation command to the list of commands. */
+
+void
+add_com_alias (name, oldname, class, abbrev_flag)
+ char *name;
+ char *oldname;
+ enum command_class class;
+ int abbrev_flag;
+{
+ add_alias_cmd (name, oldname, class, abbrev_flag, &cmdlist);
+}
+
+void
+error_no_arg (why)
+ char *why;
+{
+ error ("Argument required (%s).", why);
+}
+
+/* ARGSUSED */
+static void
+help_command (command, from_tty)
+ char *command;
+ int from_tty; /* Ignored */
+{
+ help_cmd (command, gdb_stdout);
+}
+\f
+static void
+validate_comname (comname)
+ char *comname;
+{
+ register char *p;
+
+ if (comname == 0)
+ error_no_arg ("name of command to define");
+
+ p = comname;
+ while (*p)
+ {
+ if (!isalnum (*p) && *p != '-' && *p != '_')
+ error ("Junk in argument list: \"%s\"", p);
+ p++;
+ }
+}
+
+/* This is just a placeholder in the command data structures. */
+static void
+user_defined_command (ignore, from_tty)
+ char *ignore;
+ int from_tty;
+{
+}
+
+static void
+define_command (comname, from_tty)
+ char *comname;
+ int from_tty;
+{
+ register struct command_line *cmds;
+ register struct cmd_list_element *c, *newc, *hookc = 0;
+ char *tem = comname;
+ char tmpbuf[128];
+#define HOOK_STRING "hook-"
+#define HOOK_LEN 5
+
+ validate_comname (comname);
+
+ /* Look it up, and verify that we got an exact match. */
+ c = lookup_cmd (&tem, cmdlist, "", -1, 1);
+ if (c && !STREQ (comname, c->name))
+ c = 0;
+
+ if (c)
+ {
+ if (c->class == class_user || c->class == class_alias)
+ tem = "Redefine command \"%s\"? ";
+ else
+ tem = "Really redefine built-in command \"%s\"? ";
+ if (!query (tem, c->name))
+ error ("Command \"%s\" not redefined.", c->name);
+ }
+
+ /* If this new command is a hook, then mark the command which it
+ is hooking. Note that we allow hooking `help' commands, so that
+ we can hook the `stop' pseudo-command. */
+
+ if (!strncmp (comname, HOOK_STRING, HOOK_LEN))
+ {
+ /* Look up cmd it hooks, and verify that we got an exact match. */
+ tem = comname + HOOK_LEN;
+ hookc = lookup_cmd (&tem, cmdlist, "", -1, 0);
+ if (hookc && !STREQ (comname + HOOK_LEN, hookc->name))
+ hookc = 0;
+ if (!hookc)
+ {
+ warning ("Your new `%s' command does not hook any existing command.",
+ comname);
+ if (!query ("Proceed? "))
+ error ("Not confirmed.");
+ }
+ }
+
+ comname = savestring (comname, strlen (comname));
+
+ /* If the rest of the commands will be case insensitive, this one
+ should behave in the same manner. */
+ for (tem = comname; *tem; tem++)
+ if (isupper (*tem))
+ *tem = tolower (*tem);
+
+ sprintf (tmpbuf, "Type commands for definition of \"%s\".", comname);
+ cmds = read_command_lines (tmpbuf, from_tty);
+
+ if (c && c->class == class_user)
+ free_command_lines (&c->user_commands);
+
+ newc = add_cmd (comname, class_user, user_defined_command,
+ (c && c->class == class_user)
+ ? c->doc : savestring ("User-defined.", 13), &cmdlist);
+ newc->user_commands = cmds;
+
+ /* If this new command is a hook, then mark both commands as being
+ tied. */
+ if (hookc)
+ {
+ hookc->hook = newc; /* Target gets hooked. */
+ newc->hookee = hookc; /* We are marked as hooking target cmd. */
+ }
+}
+
+static void
+document_command (comname, from_tty)
+ char *comname;
+ int from_tty;
+{
+ struct command_line *doclines;
+ register struct cmd_list_element *c;
+ char *tem = comname;
+ char tmpbuf[128];
+
+ validate_comname (comname);
+
+ c = lookup_cmd (&tem, cmdlist, "", 0, 1);
+
+ if (c->class != class_user)
+ error ("Command \"%s\" is built-in.", comname);
+
+ sprintf (tmpbuf, "Type documentation for \"%s\".", comname);
+ doclines = read_command_lines (tmpbuf, from_tty);
+
+ if (c->doc)
+ free (c->doc);
+
+ {
+ register struct command_line *cl1;
+ register int len = 0;
+
+ for (cl1 = doclines; cl1; cl1 = cl1->next)
+ len += strlen (cl1->line) + 1;
+
+ c->doc = (char *) xmalloc (len + 1);
+ *c->doc = 0;
+
+ for (cl1 = doclines; cl1; cl1 = cl1->next)
+ {
+ strcat (c->doc, cl1->line);
+ if (cl1->next)
+ strcat (c->doc, "\n");
+ }
+ }
+
+ free_command_lines (&doclines);
+}
+\f
+/* Print the GDB banner. */
+void
+print_gdb_version (stream)
+ GDB_FILE *stream;
+{
+ /* From GNU coding standards, first line is meant to be easy for a
+ program to parse, and is just canonical program name and version
+ number, which starts after last space. */
+
+ fprintf_filtered (stream, "GNU gdb %s\n", version);
+
+ /* Second line is a copyright notice. */
+
+ fprintf_filtered (stream, "Copyright 1998 Free Software Foundation, Inc.\n");
+
+ /* Following the copyright is a brief statement that the program is
+ free software, that users are free to copy and change it on
+ certain conditions, that it is covered by the GNU GPL, and that
+ there is no warranty. */
+
+ fprintf_filtered (stream, "\
+GDB is free software, covered by the GNU General Public License, and you are\n\
+welcome to change it and/or distribute copies of it under certain conditions.\n\
+Type \"show copying\" to see the conditions.\n\
+There is absolutely no warranty for GDB. Type \"show warranty\" for details.\n");
+
+ /* After the required info we print the configuration information. */
+
+ fprintf_filtered (stream, "This GDB was configured as \"");
+ if (!STREQ (host_name, target_name))
+ {
+ fprintf_filtered (stream, "--host=%s --target=%s", host_name, target_name);
+ }
+ else
+ {
+ fprintf_filtered (stream, "%s", host_name);
+ }
+ fprintf_filtered (stream, "\".");
+}
+
+/* ARGSUSED */
+static void
+show_version (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ immediate_quit++;
+ print_gdb_version (gdb_stdout);
+ printf_filtered ("\n");
+ immediate_quit--;
+}
+\f
+/* get_prompt: access method for the GDB prompt string. */
+
+#define MAX_PROMPT_SIZE 256
+
+/*
+ * int get_prompt_1 (char * buf);
+ *
+ * Work-horse for get_prompt (called via catch_errors).
+ * Argument is buffer to hold the formatted prompt.
+ *
+ * Returns: 1 for success (use formatted prompt)
+ * 0 for failure (use gdb_prompt_string).
+ */
+
+static int gdb_prompt_escape;
+
+static int
+get_prompt_1 (formatted_prompt)
+ char *formatted_prompt;
+{
+ char *local_prompt;
+
+ if (event_loop_p)
+ local_prompt = PROMPT (0);
+ else
+ local_prompt = gdb_prompt_string;
+
+
+ if (gdb_prompt_escape == 0)
+ {
+ return 0; /* do no formatting */
+ }
+ else
+ /* formatted prompt */
+ {
+ char fmt[40], *promptp, *outp, *tmp;
+ value_ptr arg_val;
+ DOUBLEST doubleval;
+ LONGEST longval;
+ CORE_ADDR addrval;
+
+ int i, len;
+ struct type *arg_type, *elt_type;
+
+ promptp = local_prompt;
+ outp = formatted_prompt;
+
+ while (*promptp != '\0')
+ {
+ int available = MAX_PROMPT_SIZE - (outp - formatted_prompt) - 1;
+
+ if (*promptp != gdb_prompt_escape)
+ {
+ if (available >= 1) /* overflow protect */
+ *outp++ = *promptp++;
+ }
+ else
+ {
+ /* GDB prompt string contains escape char. Parse for arg.
+ Two consecutive escape chars followed by arg followed by
+ a comma means to insert the arg using a default format.
+ Otherwise a printf format string may be included between
+ the two escape chars. eg:
+ %%foo, insert foo using default format
+ %2.2f%foo, insert foo using "%2.2f" format
+ A mismatch between the format string and the data type
+ of "foo" is an error (which we don't know how to protect
+ against). */
+
+ fmt[0] = '\0'; /* assume null format string */
+ if (promptp[1] == gdb_prompt_escape) /* double esc char */
+ {
+ promptp += 2; /* skip past two escape chars. */
+ }
+ else
+ {
+ /* extract format string from between two esc chars */
+ i = 0;
+ do
+ {
+ fmt[i++] = *promptp++; /* copy format string */
+ }
+ while (i < sizeof (fmt) - 1 &&
+ *promptp != gdb_prompt_escape &&
+ *promptp != '\0');
+
+ if (*promptp != gdb_prompt_escape)
+ error ("Syntax error at prompt position %d",
+ promptp - local_prompt);
+ else
+ {
+ promptp++; /* skip second escape char */
+ fmt[i++] = '\0'; /* terminate the format string */
+ }
+ }
+
+ arg_val = parse_to_comma_and_eval (&promptp);
+ if (*promptp == ',')
+ promptp++; /* skip past the comma */
+ arg_type = check_typedef (VALUE_TYPE (arg_val));
+ switch (TYPE_CODE (arg_type))
+ {
+ case TYPE_CODE_ARRAY:
+ elt_type = check_typedef (TYPE_TARGET_TYPE (arg_type));
+ if (TYPE_LENGTH (arg_type) > 0 &&
+ TYPE_LENGTH (elt_type) == 1 &&
+ TYPE_CODE (elt_type) == TYPE_CODE_INT)
+ {
+ int len = TYPE_LENGTH (arg_type);
+
+ if (VALUE_LAZY (arg_val))
+ value_fetch_lazy (arg_val);
+ tmp = VALUE_CONTENTS (arg_val);
+
+ if (len > available)
+ len = available; /* overflow protect */
+
+ /* FIXME: how to protect GDB from crashing
+ from bad user-supplied format string? */
+ if (fmt[0] != 0)
+ sprintf (outp, fmt, tmp);
+ else
+ strncpy (outp, tmp, len);
+ outp[len] = '\0';
+ }
+ break;
+ case TYPE_CODE_PTR:
+ elt_type = check_typedef (TYPE_TARGET_TYPE (arg_type));
+ addrval = value_as_pointer (arg_val);
+
+ if (TYPE_LENGTH (elt_type) == 1 &&
+ TYPE_CODE (elt_type) == TYPE_CODE_INT &&
+ addrval != 0)
+ {
+ /* display it as a string */
+ char *default_fmt = "%s";
+ char *tmp;
+ int err = 0;
+
+ /* Limiting the number of bytes that the following call
+ will read protects us from sprintf overflow later. */
+ i = target_read_string (addrval, /* src */
+ &tmp, /* dest */
+ available, /* len */
+ &err);
+ if (err) /* read failed */
+ error ("%s on target_read", safe_strerror (err));
+
+ tmp[i] = '\0'; /* force-terminate string */
+ /* FIXME: how to protect GDB from crashing
+ from bad user-supplied format string? */
+ sprintf (outp, fmt[0] == 0 ? default_fmt : fmt,
+ tmp);
+ free (tmp);
+ }
+ else
+ {
+ /* display it as a pointer */
+ char *default_fmt = "0x%x";
+
+ /* FIXME: how to protect GDB from crashing
+ from bad user-supplied format string? */
+ if (available >= 16 /*? */ ) /* overflow protect */
+ sprintf (outp, fmt[0] == 0 ? default_fmt : fmt,
+ (long) addrval);
+ }
+ break;
+ case TYPE_CODE_FLT:
+ {
+ char *default_fmt = "%g";
+
+ doubleval = value_as_double (arg_val);
+ /* FIXME: how to protect GDB from crashing
+ from bad user-supplied format string? */
+ if (available >= 16 /*? */ ) /* overflow protect */
+ sprintf (outp, fmt[0] == 0 ? default_fmt : fmt,
+ (double) doubleval);
+ break;
+ }
+ case TYPE_CODE_INT:
+ {
+ char *default_fmt = "%d";
+
+ longval = value_as_long (arg_val);
+ /* FIXME: how to protect GDB from crashing
+ from bad user-supplied format string? */
+ if (available >= 16 /*? */ ) /* overflow protect */
+ sprintf (outp, fmt[0] == 0 ? default_fmt : fmt,
+ (long) longval);
+ break;
+ }
+ case TYPE_CODE_BOOL:
+ {
+ /* no default format for bool */
+ longval = value_as_long (arg_val);
+ if (available >= 8 /*? */ ) /* overflow protect */
+ {
+ if (longval)
+ strcpy (outp, "<true>");
+ else
+ strcpy (outp, "<false>");
+ }
+ break;
+ }
+ case TYPE_CODE_ENUM:
+ {
+ /* no default format for enum */
+ longval = value_as_long (arg_val);
+ len = TYPE_NFIELDS (arg_type);
+ /* find enum name if possible */
+ for (i = 0; i < len; i++)
+ if (TYPE_FIELD_BITPOS (arg_type, i) == longval)
+ break; /* match -- end loop */
+
+ if (i < len) /* enum name found */
+ {
+ char *name = TYPE_FIELD_NAME (arg_type, i);
+
+ strncpy (outp, name, available);
+ /* in casel available < strlen (name), */
+ outp[available] = '\0';
+ }
+ else
+ {
+ if (available >= 16 /*? */ ) /* overflow protect */
+ sprintf (outp, "%ld", (long) longval);
+ }
+ break;
+ }
+ case TYPE_CODE_VOID:
+ *outp = '\0';
+ break; /* void type -- no output */
+ default:
+ error ("bad data type at prompt position %d",
+ promptp - local_prompt);
+ break;
+ }
+ outp += strlen (outp);
+ }
+ }
+ *outp++ = '\0'; /* terminate prompt string */
+ return 1;
+ }
+}
+
+char *
+get_prompt ()
+{
+ static char buf[MAX_PROMPT_SIZE];
+
+ if (catch_errors (get_prompt_1, buf, "bad formatted prompt: ",
+ RETURN_MASK_ALL))
+ {
+ return &buf[0]; /* successful formatted prompt */
+ }
+ else
+ {
+ /* Prompt could not be formatted. */
+ if (event_loop_p)
+ return PROMPT (0);
+ else
+ return gdb_prompt_string;
+ }
+}
+
+void
+set_prompt (s)
+ char *s;
+{
+/* ??rehrauer: I don't know why this fails, since it looks as though
+ assignments to prompt are wrapped in calls to savestring...
+ if (prompt != NULL)
+ free (prompt);
+ */
+ if (event_loop_p)
+ PROMPT (0) = savestring (s, strlen (s));
+ else
+ gdb_prompt_string = savestring (s, strlen (s));
+}
+\f
+
+/* If necessary, make the user confirm that we should quit. Return
+ non-zero if we should quit, zero if we shouldn't. */
+
+int
+quit_confirm ()
+{
+ if (inferior_pid != 0 && target_has_execution)
+ {
+ char *s;
+
+ /* This is something of a hack. But there's no reliable way to
+ see if a GUI is running. The `use_windows' variable doesn't
+ cut it. */
+ if (init_ui_hook)
+ s = "A debugging session is active.\nDo you still want to close the debugger?";
+ else if (attach_flag)
+ s = "The program is running. Quit anyway (and detach it)? ";
+ else
+ s = "The program is running. Exit anyway? ";
+
+ if (!query (s))
+ return 0;
+ }
+
+ return 1;
+}
+
+/* Quit without asking for confirmation. */
+
+void
+quit_force (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ int exit_code = 0;
+
+ /* An optional expression may be used to cause gdb to terminate with the
+ value of that expression. */
+ if (args)
+ {
+ value_ptr val = parse_and_eval (args);
+
+ exit_code = (int) value_as_long (val);
+ }
+
+ if (inferior_pid != 0 && target_has_execution)
+ {
+ if (attach_flag)
+ target_detach (args, from_tty);
+ else
+ target_kill ();
+ }
+
+ /* UDI wants this, to kill the TIP. */
+ target_close (1);
+
+ /* Save the history information if it is appropriate to do so. */
+ if (write_history_p && history_filename)
+ write_history (history_filename);
+
+ do_final_cleanups (ALL_CLEANUPS); /* Do any final cleanups before exiting */
+
+#if defined(TUI)
+ /* tuiDo((TuiOpaqueFuncPtr)tuiCleanUp); */
+ /* The above does not need to be inside a tuiDo(), since
+ * it is not manipulating the curses screen, but rather,
+ * it is tearing it down.
+ */
+ if (tui_version)
+ tuiCleanUp ();
+#endif
+
+ exit (exit_code);
+}
+
+/* Handle the quit command. */
+
+void
+quit_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ if (!quit_confirm ())
+ error ("Not confirmed.");
+ quit_force (args, from_tty);
+}
+
+/* Returns whether GDB is running on a terminal and whether the user
+ desires that questions be asked of them on that terminal. */
+
+int
+input_from_terminal_p ()
+{
+ return gdb_has_a_terminal () && (instream == stdin) & caution;
+}
+\f
+/* ARGSUSED */
+static void
+pwd_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ if (args)
+ error ("The \"pwd\" command does not take an argument: %s", args);
+ getcwd (gdb_dirbuf, sizeof (gdb_dirbuf));
+
+ if (!STREQ (gdb_dirbuf, current_directory))
+ printf_unfiltered ("Working directory %s\n (canonically %s).\n",
+ current_directory, gdb_dirbuf);
+ else
+ printf_unfiltered ("Working directory %s.\n", current_directory);
+}
+
+void
+cd_command (dir, from_tty)
+ char *dir;
+ int from_tty;
+{
+ int len;
+ /* Found something other than leading repetitions of "/..". */
+ int found_real_path;
+ char *p;
+
+ /* If the new directory is absolute, repeat is a no-op; if relative,
+ repeat might be useful but is more likely to be a mistake. */
+ dont_repeat ();
+
+ if (dir == 0)
+ error_no_arg ("new working directory");
+
+ dir = tilde_expand (dir);
+ make_cleanup (free, dir);
+
+ if (chdir (dir) < 0)
+ perror_with_name (dir);
+
+#if defined(_WIN32) || defined(__MSDOS__)
+ /* There's too much mess with DOSish names like "d:", "d:.",
+ "d:./foo" etc. Instead of having lots of special #ifdef'ed code,
+ simply get the canonicalized name of the current directory. */
+ dir = getcwd (gdb_dirbuf, sizeof (gdb_dirbuf));
+#endif
+
+ len = strlen (dir);
+ if (SLASH_P (dir[len-1]))
+ {
+ /* Remove the trailing slash unless this is a root directory
+ (including a drive letter on non-Unix systems). */
+ if (!(len == 1) /* "/" */
+#if defined(_WIN32) || defined(__MSDOS__)
+ && !(!SLASH_P (*dir) && ROOTED_P (dir) && len <= 3) /* "d:/" */
+#endif
+ )
+ len--;
+ }
+
+ dir = savestring (dir, len);
+ if (ROOTED_P (dir))
+ current_directory = dir;
+ else
+ {
+ if (SLASH_P (current_directory[strlen (current_directory) - 1]))
+ current_directory = concat (current_directory, dir, NULL);
+ else
+ current_directory = concat (current_directory, SLASH_STRING, dir, NULL);
+ free (dir);
+ }
+
+ /* Now simplify any occurrences of `.' and `..' in the pathname. */
+
+ found_real_path = 0;
+ for (p = current_directory; *p;)
+ {
+ if (SLASH_P (p[0]) && p[1] == '.' && (p[2] == 0 || SLASH_P (p[2])))
+ strcpy (p, p + 2);
+ else if (SLASH_P (p[0]) && p[1] == '.' && p[2] == '.'
+ && (p[3] == 0 || SLASH_P (p[3])))
+ {
+ if (found_real_path)
+ {
+ /* Search backwards for the directory just before the "/.."
+ and obliterate it and the "/..". */
+ char *q = p;
+ while (q != current_directory && !SLASH_P (q[-1]))
+ --q;
+
+ if (q == current_directory)
+ /* current_directory is
+ a relative pathname ("can't happen"--leave it alone). */
+ ++p;
+ else
+ {
+ strcpy (q - 1, p + 3);
+ p = q - 1;
+ }
+ }
+ else
+ /* We are dealing with leading repetitions of "/..", for example
+ "/../..", which is the Mach super-root. */
+ p += 3;
+ }
+ else
+ {
+ found_real_path = 1;
+ ++p;
+ }
+ }
+
+ forget_cached_source_info ();
+
+ if (from_tty)
+ pwd_command ((char *) 0, 1);
+}
+\f
+struct source_cleanup_lines_args
+{
+ int old_line;
+ char *old_file;
+ char *old_pre_error;
+ char *old_error_pre_print;
+};
+
+static void
+source_cleanup_lines (args)
+ PTR args;
+{
+ struct source_cleanup_lines_args *p =
+ (struct source_cleanup_lines_args *) args;
+ source_line_number = p->old_line;
+ source_file_name = p->old_file;
+ source_pre_error = p->old_pre_error;
+ error_pre_print = p->old_error_pre_print;
+}
+
+/* ARGSUSED */
+void
+source_command (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ FILE *stream;
+ struct cleanup *old_cleanups;
+ char *file = args;
+ struct source_cleanup_lines_args old_lines;
+ int needed_length;
+
+ if (file == NULL)
+ {
+ error ("source command requires pathname of file to source.");
+ }
+
+ file = tilde_expand (file);
+ old_cleanups = make_cleanup (free, file);
+
+ stream = fopen (file, FOPEN_RT);
+ if (!stream)
+ {
+ if (from_tty)
+ perror_with_name (file);
+ else
+ return;
+ }
+
+ make_cleanup ((make_cleanup_func) fclose, stream);
+
+ old_lines.old_line = source_line_number;
+ old_lines.old_file = source_file_name;
+ old_lines.old_pre_error = source_pre_error;
+ old_lines.old_error_pre_print = error_pre_print;
+ make_cleanup (source_cleanup_lines, &old_lines);
+ source_line_number = 0;
+ source_file_name = file;
+ source_pre_error = error_pre_print == NULL ? "" : error_pre_print;
+ source_pre_error = savestring (source_pre_error, strlen (source_pre_error));
+ make_cleanup (free, source_pre_error);
+ /* This will get set every time we read a line. So it won't stay "" for
+ long. */
+ error_pre_print = "";
+
+ needed_length = strlen (source_file_name) + strlen (source_pre_error) + 80;
+ if (source_error_allocated < needed_length)
+ {
+ source_error_allocated *= 2;
+ if (source_error_allocated < needed_length)
+ source_error_allocated = needed_length;
+ if (source_error == NULL)
+ source_error = xmalloc (source_error_allocated);
+ else
+ source_error = xrealloc (source_error, source_error_allocated);
+ }
+
+ read_command_file (stream);
+
+ do_cleanups (old_cleanups);
+}
+
+/* ARGSUSED */
+static void
+echo_command (text, from_tty)
+ char *text;
+ int from_tty;
+{
+ char *p = text;
+ register int c;
+
+ if (text)
+ while ((c = *p++) != '\0')
+ {
+ if (c == '\\')
+ {
+ /* \ at end of argument is used after spaces
+ so they won't be lost. */
+ if (*p == 0)
+ return;
+
+ c = parse_escape (&p);
+ if (c >= 0)
+ printf_filtered ("%c", c);
+ }
+ else
+ printf_filtered ("%c", c);
+ }
+
+ /* Force this output to appear now. */
+ wrap_here ("");
+ gdb_flush (gdb_stdout);
+}
+
+/* ARGSUSED */
+static void
+dont_repeat_command (ignored, from_tty)
+ char *ignored;
+ int from_tty;
+{
+ *line = 0; /* Can't call dont_repeat here because we're not
+ necessarily reading from stdin. */
+}
+\f
+/* Functions to manipulate command line editing control variables. */
+
+/* Number of commands to print in each call to show_commands. */
+#define Hist_print 10
+static void
+show_commands (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ /* Index for history commands. Relative to history_base. */
+ int offset;
+
+ /* Number of the history entry which we are planning to display next.
+ Relative to history_base. */
+ static int num = 0;
+
+ /* The first command in the history which doesn't exist (i.e. one more
+ than the number of the last command). Relative to history_base. */
+ int hist_len;
+
+ extern HIST_ENTRY *history_get PARAMS ((int));
+
+ /* Print out some of the commands from the command history. */
+ /* First determine the length of the history list. */
+ hist_len = history_size;
+ for (offset = 0; offset < history_size; offset++)
+ {
+ if (!history_get (history_base + offset))
+ {
+ hist_len = offset;
+ break;
+ }
+ }
+
+ if (args)
+ {
+ if (args[0] == '+' && args[1] == '\0')
+ /* "info editing +" should print from the stored position. */
+ ;
+ else
+ /* "info editing <exp>" should print around command number <exp>. */
+ num = (parse_and_eval_address (args) - history_base) - Hist_print / 2;
+ }
+ /* "show commands" means print the last Hist_print commands. */
+ else
+ {
+ num = hist_len - Hist_print;
+ }
+
+ if (num < 0)
+ num = 0;
+
+ /* If there are at least Hist_print commands, we want to display the last
+ Hist_print rather than, say, the last 6. */
+ if (hist_len - num < Hist_print)
+ {
+ num = hist_len - Hist_print;
+ if (num < 0)
+ num = 0;
+ }
+
+ for (offset = num; offset < num + Hist_print && offset < hist_len; offset++)
+ {
+ printf_filtered ("%5d %s\n", history_base + offset,
+ (history_get (history_base + offset))->line);
+ }
+
+ /* The next command we want to display is the next one that we haven't
+ displayed yet. */
+ num += Hist_print;
+
+ /* If the user repeats this command with return, it should do what
+ "show commands +" does. This is unnecessary if arg is null,
+ because "show commands +" is not useful after "show commands". */
+ if (from_tty && args)
+ {
+ args[0] = '+';
+ args[1] = '\0';
+ }
+}
+
+/* Called by do_setshow_command. */
+/* ARGSUSED */
+static void
+set_history_size_command (args, from_tty, c)
+ char *args;
+ int from_tty;
+ struct cmd_list_element *c;
+{
+ if (history_size == INT_MAX)
+ unstifle_history ();
+ else if (history_size >= 0)
+ stifle_history (history_size);
+ else
+ {
+ history_size = INT_MAX;
+ error ("History size must be non-negative");
+ }
+}
+
+/* ARGSUSED */
+static void
+set_history (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ printf_unfiltered ("\"set history\" must be followed by the name of a history subcommand.\n");
+ help_list (sethistlist, "set history ", -1, gdb_stdout);
+}
+
+/* ARGSUSED */
+static void
+show_history (args, from_tty)
+ char *args;
+ int from_tty;
+{
+ cmd_show_list (showhistlist, from_tty, "");
+}
+
+int info_verbose = 0; /* Default verbose msgs off */
+
+/* Called by do_setshow_command. An elaborate joke. */
+/* ARGSUSED */
+static void
+set_verbose (args, from_tty, c)
+ char *args;
+ int from_tty;
+ struct cmd_list_element *c;
+{
+ char *cmdname = "verbose";
+ struct cmd_list_element *showcmd;
+
+ showcmd = lookup_cmd_1 (&cmdname, showlist, NULL, 1);
+
+ if (info_verbose)
+ {
+ c->doc = "Set verbose printing of informational messages.";
+ showcmd->doc = "Show verbose printing of informational messages.";
+ }
+ else
+ {
+ c->doc = "Set verbosity.";
+ showcmd->doc = "Show verbosity.";
+ }
+}
+
+static void
+float_handler (signo)
+ int signo;
+{
+ /* This message is based on ANSI C, section 4.7. Note that integer
+ divide by zero causes this, so "float" is a misnomer. */
+ signal (SIGFPE, float_handler);
+ error ("Erroneous arithmetic operation.");
+}
+\f
+
+static void
+init_cmd_lists ()
+{
+ cmdlist = NULL;
+ infolist = NULL;
+ enablelist = NULL;
+ disablelist = NULL;
+ togglelist = NULL;
+ stoplist = NULL;
+ deletelist = NULL;
+ enablebreaklist = NULL;
+ setlist = NULL;
+ unsetlist = NULL;
+ showlist = NULL;
+ sethistlist = NULL;
+ showhistlist = NULL;
+ unsethistlist = NULL;
+ maintenancelist = NULL;
+ maintenanceinfolist = NULL;
+ maintenanceprintlist = NULL;
+ setprintlist = NULL;
+ showprintlist = NULL;
+ setchecklist = NULL;
+ showchecklist = NULL;
+}
+
+/* Init the history buffer. Note that we are called after the init file(s)
+ * have been read so that the user can change the history file via his
+ * .gdbinit file (for instance). The GDBHISTFILE environment variable
+ * overrides all of this.
+ */
+
+void
+init_history ()
+{
+ char *tmpenv;
+
+ tmpenv = getenv ("HISTSIZE");
+ if (tmpenv)
+ history_size = atoi (tmpenv);
+ else if (!history_size)
+ history_size = 256;
+
+ stifle_history (history_size);
+
+ tmpenv = getenv ("GDBHISTFILE");
+ if (tmpenv)
+ history_filename = savestring (tmpenv, strlen (tmpenv));
+ else if (!history_filename)
+ {
+ /* We include the current directory so that if the user changes
+ directories the file written will be the same as the one
+ that was read. */
+#ifdef __MSDOS__
+ /* No leading dots in file names are allowed on MSDOS. */
+ history_filename = concat (current_directory, "/_gdb_history", NULL);
+#else
+ history_filename = concat (current_directory, "/.gdb_history", NULL);
+#endif
+ }
+ read_history (history_filename);
+}
+
+static void
+init_main ()
+{
+ struct cmd_list_element *c;
+
+ /* If we are running the asynchronous version,
+ we initialize the prompts differently. */
+ if (!event_loop_p)
+ {
+ gdb_prompt_string = savestring (DEFAULT_PROMPT, strlen (DEFAULT_PROMPT));
+ }
+ else
+ {
+ /* initialize the prompt stack to a simple "(gdb) " prompt or to
+ whatever the DEFAULT_PROMPT is. */
+ the_prompts.top = 0;
+ PREFIX (0) = "";
+ PROMPT (0) = savestring (DEFAULT_PROMPT, strlen (DEFAULT_PROMPT));
+ SUFFIX (0) = "";
+ /* Set things up for annotation_level > 1, if the user ever decides
+ to use it. */
+ async_annotation_suffix = "prompt";
+ /* Set the variable associated with the setshow prompt command. */
+ new_async_prompt = savestring (PROMPT (0), strlen (PROMPT (0)));
+ }
+ gdb_prompt_escape = 0; /* default to none. */
+
+ /* Set the important stuff up for command editing. */
+ command_editing_p = 1;
+ history_expansion_p = 0;
+ write_history_p = 0;
+
+ /* Setup important stuff for command line editing. */
+ rl_completion_entry_function = (int (*)()) readline_line_completion_function;
+ rl_completer_word_break_characters = gdb_completer_word_break_characters;
+ rl_completer_quote_characters = gdb_completer_quote_characters;
+ rl_readline_name = "gdb";
+
+ /* Define the classes of commands.
+ They will appear in the help list in the reverse of this order. */
+
+ add_cmd ("internals", class_maintenance, NO_FUNCTION,
+ "Maintenance commands.\n\
+Some gdb commands are provided just for use by gdb maintainers.\n\
+These commands are subject to frequent change, and may not be as\n\
+well documented as user commands.",
+ &cmdlist);
+ add_cmd ("obscure", class_obscure, NO_FUNCTION, "Obscure features.", &cmdlist);
+ add_cmd ("aliases", class_alias, NO_FUNCTION, "Aliases of other commands.", &cmdlist);
+ add_cmd ("user-defined", class_user, NO_FUNCTION, "User-defined commands.\n\
+The commands in this class are those defined by the user.\n\
+Use the \"define\" command to define a command.", &cmdlist);
+ add_cmd ("support", class_support, NO_FUNCTION, "Support facilities.", &cmdlist);
+ if (!dbx_commands)
+ add_cmd ("status", class_info, NO_FUNCTION, "Status inquiries.", &cmdlist);
+ add_cmd ("files", class_files, NO_FUNCTION, "Specifying and examining files.", &cmdlist);
+ add_cmd ("breakpoints", class_breakpoint, NO_FUNCTION, "Making program stop at certain points.", &cmdlist);
+ add_cmd ("data", class_vars, NO_FUNCTION, "Examining data.", &cmdlist);
+ add_cmd ("stack", class_stack, NO_FUNCTION, "Examining the stack.\n\
+The stack is made up of stack frames. Gdb assigns numbers to stack frames\n\
+counting from zero for the innermost (currently executing) frame.\n\n\
+At any time gdb identifies one frame as the \"selected\" frame.\n\
+Variable lookups are done with respect to the selected frame.\n\
+When the program being debugged stops, gdb selects the innermost frame.\n\
+The commands below can be used to select other frames by number or address.",
+ &cmdlist);
+ add_cmd ("running", class_run, NO_FUNCTION, "Running the program.", &cmdlist);
+
+ add_com ("pwd", class_files, pwd_command,
+ "Print working directory. This is used for your program as well.");
+ c = add_cmd ("cd", class_files, cd_command,
+ "Set working directory to DIR for debugger and program being debugged.\n\
+The change does not take effect for the program being debugged\n\
+until the next time it is started.", &cmdlist);
+ c->completer = filename_completer;
+
+ /* The set prompt command is different depending whether or not the
+ async version is run. NOTE: this difference is going to
+ disappear as we make the event loop be the default engine of
+ gdb. */
+ if (!event_loop_p)
+ {
+ add_show_from_set
+ (add_set_cmd ("prompt", class_support, var_string,
+ (char *) &gdb_prompt_string, "Set gdb's prompt",
+ &setlist),
+ &showlist);
+ }
+ else
+ {
+ c = add_set_cmd ("prompt", class_support, var_string,
+ (char *) &new_async_prompt, "Set gdb's prompt",
+ &setlist);
+ add_show_from_set (c, &showlist);
+ c->function.sfunc = set_async_prompt;
+ }
+
+ add_show_from_set
+ (add_set_cmd ("prompt-escape-char", class_support, var_zinteger,
+ (char *) &gdb_prompt_escape,
+ "Set escape character for formatting of gdb's prompt",
+ &setlist),
+ &showlist);
+
+ add_com ("echo", class_support, echo_command,
+ "Print a constant string. Give string as argument.\n\
+C escape sequences may be used in the argument.\n\
+No newline is added at the end of the argument;\n\
+use \"\\n\" if you want a newline to be printed.\n\
+Since leading and trailing whitespace are ignored in command arguments,\n\
+if you want to print some you must use \"\\\" before leading whitespace\n\
+to be printed or after trailing whitespace.");
+ add_com ("document", class_support, document_command,
+ "Document a user-defined command.\n\
+Give command name as argument. Give documentation on following lines.\n\
+End with a line of just \"end\".");
+ add_com ("define", class_support, define_command,
+ "Define a new command name. Command name is argument.\n\
+Definition appears on following lines, one command per line.\n\
+End with a line of just \"end\".\n\
+Use the \"document\" command to give documentation for the new command.\n\
+Commands defined in this way may have up to ten arguments.");
+
+#ifdef __STDC__
+ c = add_cmd ("source", class_support, source_command,
+ "Read commands from a file named FILE.\n\
+Note that the file \"" GDBINIT_FILENAME "\" is read automatically in this way\n\
+when gdb is started.", &cmdlist);
+#else
+ /* Punt file name, we can't help it easily. */
+ c = add_cmd ("source", class_support, source_command,
+ "Read commands from a file named FILE.\n\
+Note that the file \".gdbinit\" is read automatically in this way\n\
+when gdb is started.", &cmdlist);
+#endif
+ c->completer = filename_completer;
+
+ add_com ("quit", class_support, quit_command, "Exit gdb.");
+ add_com ("help", class_support, help_command, "Print list of commands.");
+ add_com_alias ("q", "quit", class_support, 1);
+ add_com_alias ("h", "help", class_support, 1);
+
+ add_com ("dont-repeat", class_support, dont_repeat_command, "Don't repeat this command.\n\
+Primarily used inside of user-defined commands that should not be repeated when\n\
+hitting return.");
+
+ c = add_set_cmd ("verbose", class_support, var_boolean, (char *) &info_verbose,
+ "Set ",
+ &setlist),
+ add_show_from_set (c, &showlist);
+ c->function.sfunc = set_verbose;
+ set_verbose (NULL, 0, c);
+
+ /* The set editing command is different depending whether or not the
+ async version is run. NOTE: this difference is going to disappear
+ as we make the event loop be the default engine of gdb. */
+ if (!event_loop_p)
+ {
+ add_show_from_set
+ (add_set_cmd ("editing", class_support, var_boolean, (char *) &command_editing_p,
+ "Set editing of command lines as they are typed.\n\
+Use \"on\" to enable the editing, and \"off\" to disable it.\n\
+Without an argument, command line editing is enabled. To edit, use\n\
+EMACS-like or VI-like commands like control-P or ESC.", &setlist),
+ &showlist);
+ }
+ else
+ {
+ c = add_set_cmd ("editing", class_support, var_boolean, (char *) &async_command_editing_p,
+ "Set editing of command lines as they are typed.\n\
+Use \"on\" to enable the editing, and \"off\" to disable it.\n\
+Without an argument, command line editing is enabled. To edit, use\n\
+EMACS-like or VI-like commands like control-P or ESC.", &setlist);
+
+ add_show_from_set (c, &showlist);
+ c->function.sfunc = set_async_editing_command;
+ }
+
+ add_prefix_cmd ("history", class_support, set_history,
+ "Generic command for setting command history parameters.",
+ &sethistlist, "set history ", 0, &setlist);
+ add_prefix_cmd ("history", class_support, show_history,
+ "Generic command for showing command history parameters.",
+ &showhistlist, "show history ", 0, &showlist);
+
+ add_show_from_set
+ (add_set_cmd ("expansion", no_class, var_boolean, (char *) &history_expansion_p,
+ "Set history expansion on command input.\n\
+Without an argument, history expansion is enabled.", &sethistlist),
+ &showhistlist);
+
+ add_show_from_set
+ (add_set_cmd ("save", no_class, var_boolean, (char *) &write_history_p,
+ "Set saving of the history record on exit.\n\
+Use \"on\" to enable the saving, and \"off\" to disable it.\n\
+Without an argument, saving is enabled.", &sethistlist),
+ &showhistlist);
+
+ c = add_set_cmd ("size", no_class, var_integer, (char *) &history_size,
+ "Set the size of the command history, \n\
+ie. the number of previous commands to keep a record of.", &sethistlist);
+ add_show_from_set (c, &showhistlist);
+ c->function.sfunc = set_history_size_command;
+
+ add_show_from_set
+ (add_set_cmd ("filename", no_class, var_filename, (char *) &history_filename,
+ "Set the filename in which to record the command history\n\
+ (the list of previous commands of which a record is kept).", &sethistlist),
+ &showhistlist);
+
+ add_show_from_set
+ (add_set_cmd ("confirm", class_support, var_boolean,
+ (char *) &caution,
+ "Set whether to confirm potentially dangerous operations.",
+ &setlist),
+ &showlist);
+
+ add_prefix_cmd ("info", class_info, info_command,
+ "Generic command for showing things about the program being debugged.",
+ &infolist, "info ", 0, &cmdlist);
+ add_com_alias ("i", "info", class_info, 1);
+
+ add_com ("complete", class_obscure, complete_command,
+ "List the completions for the rest of the line as a command.");
+
+ add_prefix_cmd ("show", class_info, show_command,
+ "Generic command for showing things about the debugger.",
+ &showlist, "show ", 0, &cmdlist);
+ /* Another way to get at the same thing. */
+ add_info ("set", show_command, "Show all GDB settings.");
+
+ add_cmd ("commands", no_class, show_commands,
+ "Show the history of commands you typed.\n\
+You can supply a command number to start with, or a `+' to start after\n\
+the previous command number shown.",
+ &showlist);
+
+ add_cmd ("version", no_class, show_version,
+ "Show what version of GDB this is.", &showlist);
+
+ add_com ("while", class_support, while_command,
+ "Execute nested commands WHILE the conditional expression is non zero.\n\
+The conditional expression must follow the word `while' and must in turn be\n\
+followed by a new line. The nested commands must be entered one per line,\n\
+and should be terminated by the word `end'.");
+
+ add_com ("if", class_support, if_command,
+ "Execute nested commands once IF the conditional expression is non zero.\n\
+The conditional expression must follow the word `if' and must in turn be\n\
+followed by a new line. The nested commands must be entered one per line,\n\
+and should be terminated by the word 'else' or `end'. If an else clause\n\
+is used, the same rules apply to its nested commands as to the first ones.");
+
+ /* If target is open when baud changes, it doesn't take effect until the
+ next open (I think, not sure). */
+ add_show_from_set (add_set_cmd ("remotebaud", no_class,
+ var_zinteger, (char *) &baud_rate,
+ "Set baud rate for remote serial I/O.\n\
+This value is used to set the speed of the serial port when debugging\n\
+using remote targets.", &setlist),
+ &showlist);
+
+ add_show_from_set (
+ add_set_cmd ("remotedebug", no_class, var_zinteger, (char *) &remote_debug,
+ "Set debugging of remote protocol.\n\
+When enabled, each packet sent or received with the remote target\n\
+is displayed.", &setlist),
+ &showlist);
+
+ add_show_from_set (
+ add_set_cmd ("remotetimeout", no_class, var_integer, (char *) &remote_timeout,
+ "Set timeout limit to wait for target to respond.\n\
+This value is used to set the time limit for gdb to wait for a response\n\
+from the target.", &setlist),
+ &showlist);
+
+ /* The set annotate command is different depending whether or not
+ the async version is run. NOTE: this difference is going to
+ disappear as we make the event loop be the default engine of
+ gdb. */
+ if (!event_loop_p)
+ {
+ c = add_set_cmd ("annotate", class_obscure, var_zinteger,
+ (char *) &annotation_level, "Set annotation_level.\n\
+0 == normal; 1 == fullname (for use when running under emacs)\n\
+2 == output annotated suitably for use by programs that control GDB.",
+ &setlist);
+ c = add_show_from_set (c, &showlist);
+ }
+ else
+ {
+ c = add_set_cmd ("annotate", class_obscure, var_zinteger,
+ (char *) &annotation_level, "Set annotation_level.\n\
+0 == normal; 1 == fullname (for use when running under emacs)\n\
+2 == output annotated suitably for use by programs that control GDB.",
+ &setlist);
+ add_show_from_set (c, &showlist);
+ c->function.sfunc = set_async_annotation_level;
+ }
+ if (event_loop_p)
+ {
+ add_show_from_set
+ (add_set_cmd ("exec-done-display", class_support, var_boolean, (char *) &exec_done_display_p,
+ "Set notification of completion for asynchronous execution commands.\n\
+Use \"on\" to enable the notification, and \"off\" to disable it.", &setlist),
+ &showlist);
+ }
+}
projects / deliverable / binutils-gdb.git / blobdiff