/* Top level stuff for GDB, the GNU debugger.
- Copyright (C) 1986-2016 Free Software Foundation, Inc.
+ Copyright (C) 1986-2019 Free Software Foundation, Inc.
This file is part of GDB.
#include "value.h"
#include "language.h"
#include "terminal.h" /* For job_control. */
+#include "common/job-control.h"
#include "annotate.h"
#include "completer.h"
#include "top.h"
-#include "version.h"
+#include "common/version.h"
#include "serial.h"
-#include "doublest.h"
#include "main.h"
#include "event-loop.h"
#include "gdbthread.h"
#include "extension.h"
#include "interps.h"
-#include "observer.h"
+#include "observable.h"
#include "maint.h"
#include "filenames.h"
#include "frame.h"
-#include "buffer.h"
+#include "common/buffer.h"
+#include "gdb_select.h"
+#include "common/scope-exit.h"
/* readline include files. */
#include "readline/readline.h"
# include "tui/tui.h"
#endif
+#ifndef O_NOCTTY
+# define O_NOCTTY 0
+#endif
+
extern void initialize_all_files (void);
#define PROMPT(X) the_prompts.prompt_stack[the_prompts.top + X].prompt
#define DEFAULT_PROMPT "(gdb) "
#endif
+/* Generate a function that exports a pointer to a field of the
+ current UI. */
+
+#define gen_ret_current_ui_field_ptr(type, name) \
+type * \
+current_ui_## name ## _ptr (void) \
+{ \
+ return ¤t_ui->m_ ## name; \
+}
+
+gen_ret_current_ui_field_ptr (struct ui_file *, gdb_stdout)
+gen_ret_current_ui_field_ptr (struct ui_file *, gdb_stdin)
+gen_ret_current_ui_field_ptr (struct ui_file *, gdb_stderr)
+gen_ret_current_ui_field_ptr (struct ui_file *, gdb_stdlog)
+gen_ret_current_ui_field_ptr (struct ui_out *, current_uiout)
+
/* Initialization file name for gdb. This is host-dependent. */
const char gdbinit[] = GDBINIT;
value);
}
-/* stdio stream that command input is being read from. Set to stdin
- normally. Set by source_command to the file we are sourcing. Set
- to NULL if we are executing a user-defined command or interacting
- via a GUI. */
-
-FILE *instream;
-
-/* Flag to indicate whether a user defined command is currently running. */
-
-int in_user_command;
-
/* Current working directory. */
char *current_directory;
-/* The directory name is actually stored here (usually). */
-char gdb_dirbuf[1024];
-
/* The last command line executed on the console. Used for command
repetitions. */
char *saved_command_line;
/* Timeout limit for response from target. */
-/* The default value has been changed many times over the years. It
- was originally 5 seconds. But that was thought to be a long time
+/* The default value has been changed many times over the years. It
+ was originally 5 seconds. But that was thought to be a long time
to sit and wait, so it was changed to 2 seconds. That was thought
- to be plenty unless the connection was going through some terminal
+ to be plenty unless the connection was going through some terminal
server or multiplexer or other form of hairy serial connection.
- In mid-1996, remote_timeout was moved from remote.c to top.c and
+ In mid-1996, remote_timeout was moved from remote.c to top.c and
it began being used in other remote-* targets. It appears that the
default was changed to 20 seconds at that time, perhaps because the
Renesas E7000 ICE didn't always respond in a timely manner.
But if 5 seconds is a long time to sit and wait for retransmissions,
- 20 seconds is far worse. This demonstrates the difficulty of using
+ 20 seconds is far worse. This demonstrates the difficulty of using
a single variable for all protocol timeouts.
- As remote.c is used much more than remote-e7000.c, it was changed
+ As remote.c is used much more than remote-e7000.c, it was changed
back to 2 seconds in 1999. */
int remote_timeout = 2;
int remote_debug = 0;
/* Sbrk location on entry to main. Used for statistics only. */
-#ifdef HAVE_SBRK
+#ifdef HAVE_USEFUL_SBRK
char *lim_at_start;
#endif
/* Called from print_frame_info to list the line we stopped in. */
-void (*deprecated_print_frame_info_listing_hook) (struct symtab * s,
+void (*deprecated_print_frame_info_listing_hook) (struct symtab * s,
int line,
- int stopline,
+ int stopline,
int noerror);
/* Replaces most of query. */
called to notify the GUI that we are done with the interaction
window and it can close it. */
-void (*deprecated_readline_begin_hook) (char *, ...);
+void (*deprecated_readline_begin_hook) (const char *, ...);
char *(*deprecated_readline_hook) (const char *);
void (*deprecated_readline_end_hook) (void);
/* Used by UI as a wrapper around command execution. May do various
things like enabling/disabling buttons, etc... */
-void (*deprecated_call_command_hook) (struct cmd_list_element * c,
- char *cmd, int from_tty);
+void (*deprecated_call_command_hook) (struct cmd_list_element * c,
+ const char *cmd, int from_tty);
/* Called when the current thread changes. Argument is thread id. */
void (*deprecated_context_hook) (int id);
+/* The highest UI number ever assigned. */
+static int highest_ui_num;
+
+/* See top.h. */
+
+ui::ui (FILE *instream_, FILE *outstream_, FILE *errstream_)
+ : next (nullptr),
+ num (++highest_ui_num),
+ call_readline (nullptr),
+ input_handler (nullptr),
+ command_editing (0),
+ interp_info (nullptr),
+ async (0),
+ secondary_prompt_depth (0),
+ stdin_stream (instream_),
+ instream (instream_),
+ outstream (outstream_),
+ errstream (errstream_),
+ input_fd (fileno (instream)),
+ input_interactive_p (ISATTY (instream)),
+ prompt_state (PROMPT_NEEDED),
+ m_gdb_stdout (new stdio_file (outstream)),
+ m_gdb_stdin (new stdio_file (instream)),
+ m_gdb_stderr (new stderr_file (errstream)),
+ m_gdb_stdlog (m_gdb_stderr),
+ m_current_uiout (nullptr)
+{
+ buffer_init (&line_buffer);
+
+ if (ui_list == NULL)
+ ui_list = this;
+ else
+ {
+ struct ui *last;
+
+ for (last = ui_list; last->next != NULL; last = last->next)
+ ;
+ last->next = this;
+ }
+}
+
+ui::~ui ()
+{
+ struct ui *ui, *uiprev;
+
+ uiprev = NULL;
+
+ for (ui = ui_list; ui != NULL; uiprev = ui, ui = ui->next)
+ if (ui == this)
+ break;
+
+ gdb_assert (ui != NULL);
+
+ if (uiprev != NULL)
+ uiprev->next = next;
+ else
+ ui_list = next;
+
+ delete m_gdb_stdin;
+ delete m_gdb_stdout;
+ delete m_gdb_stderr;
+}
+
+/* Open file named NAME for read/write, making sure not to make it the
+ controlling terminal. */
+
+static gdb_file_up
+open_terminal_stream (const char *name)
+{
+ int fd;
+
+ fd = gdb_open_cloexec (name, O_RDWR | O_NOCTTY, 0);
+ if (fd < 0)
+ perror_with_name (_("opening terminal failed"));
+
+ return gdb_file_up (fdopen (fd, "w+"));
+}
+
+/* Implementation of the "new-ui" command. */
+
+static void
+new_ui_command (const char *args, int from_tty)
+{
+ gdb_file_up stream[3];
+ int i;
+ int argc;
+ const char *interpreter_name;
+ const char *tty_name;
+
+ dont_repeat ();
+
+ gdb_argv argv (args);
+ argc = argv.count ();
+
+ if (argc < 2)
+ error (_("Usage: new-ui INTERPRETER TTY"));
+
+ interpreter_name = argv[0];
+ tty_name = argv[1];
+
+ {
+ scoped_restore save_ui = make_scoped_restore (¤t_ui);
+
+ /* Open specified terminal, once for each of
+ stdin/stdout/stderr. */
+ for (i = 0; i < 3; i++)
+ stream[i] = open_terminal_stream (tty_name);
+
+ std::unique_ptr<ui> ui
+ (new struct ui (stream[0].get (), stream[1].get (), stream[2].get ()));
+
+ ui->async = 1;
+
+ current_ui = ui.get ();
+
+ set_top_level_interpreter (interpreter_name);
+
+ interp_pre_command_loop (top_level_interpreter ());
+
+ /* Make sure the files are not closed. */
+ stream[0].release ();
+ stream[1].release ();
+ stream[2].release ();
+
+ ui.release ();
+ }
+
+ printf_unfiltered ("New UI allocated\n");
+}
+
/* Handler for SIGHUP. */
#ifdef SIGHUP
/* NOTE 1999-04-29: This variable will be static again, once we modify
gdb to use the event loop as the default command loop and we merge
event-top.c into this file, top.c. */
-/* static */ const char *source_file_name;
-
-/* Clean up on error during a "source" command (or execution of a
- user-defined command). */
-
-void
-do_restore_instream_cleanup (void *stream)
-{
- /* Restore the previous input stream. */
- instream = (FILE *) stream;
-}
+/* static */ std::string source_file_name;
/* Read commands from STREAM. */
void
read_command_file (FILE *stream)
{
- struct cleanup *cleanups;
+ struct ui *ui = current_ui;
+
+ scoped_restore save_instream
+ = make_scoped_restore (&ui->instream, stream);
+
+ /* Read commands from `instream' and execute them until end of file
+ or error reading instream. */
- cleanups = make_cleanup (do_restore_instream_cleanup, instream);
- instream = stream;
- command_loop ();
- do_cleanups (cleanups);
+ while (ui->instream != NULL && !feof (ui->instream))
+ {
+ char *command;
+
+ /* Get a command-line. This calls the readline package. */
+ command = command_line_input (NULL, NULL);
+ if (command == NULL)
+ break;
+ command_handler (command);
+ }
}
\f
void (*pre_init_ui_hook) (void);
static void
do_chdir_cleanup (void *old_dir)
{
- chdir (old_dir);
+ chdir ((const char *) old_dir);
xfree (old_dir);
}
#endif
-struct cleanup *
-prepare_execute_command (void)
+scoped_value_mark
+prepare_execute_command ()
{
- struct value *mark;
- struct cleanup *cleanup;
-
- mark = value_mark ();
- cleanup = make_cleanup_value_free_to_mark (mark);
-
/* With multiple threads running while the one we're examining is
stopped, the dcache can get stale without us being able to detect
it. For the duration of the command, though, use the dcache to
if (non_stop)
target_dcache_invalidate ();
- return cleanup;
+ return scoped_value_mark ();
}
/* Tell the user if the language has changed (except first time) after
void
wait_sync_command_done (void)
{
+ /* Processing events may change the current UI. */
+ scoped_restore save_ui = make_scoped_restore (¤t_ui);
+ struct ui *ui = current_ui;
+
while (gdb_do_one_event () >= 0)
- if (!sync_execution)
+ if (ui->prompt_state != PROMPT_BLOCKED)
break;
}
command's list, running command hooks or similars), and we
just ran a synchronous command that started the target, wait
for that command to end. */
- if (!interpreter_async && !was_sync && sync_execution)
+ if (!current_ui->async
+ && !was_sync
+ && current_ui->prompt_state == PROMPT_BLOCKED)
wait_sync_command_done ();
}
+/* If not NULL, the arguments that should be passed if the current
+ command is repeated. */
+
+static const char *repeat_arguments;
+
+/* See command.h. */
+
+void
+set_repeat_arguments (const char *args)
+{
+ repeat_arguments = args;
+}
+
/* Execute the line P as a command, in the current user context.
Pass FROM_TTY as second argument to the defining function. */
void
-execute_command (char *p, int from_tty)
+execute_command (const char *p, int from_tty)
{
- struct cleanup *cleanup_if_error, *cleanup;
struct cmd_list_element *c;
- char *line;
+ const char *line;
+ const char *cmd_start = p;
- cleanup_if_error = make_bpstat_clear_actions_cleanup ();
- cleanup = prepare_execute_command ();
+ auto cleanup_if_error = make_scope_exit (bpstat_clear_actions);
+ scoped_value_mark cleanup = prepare_execute_command ();
/* Force cleanup of any alloca areas if using C alloca instead of
a builtin alloca. */
/* This can happen when command_line_input hits end of file. */
if (p == NULL)
{
- do_cleanups (cleanup);
- discard_cleanups (cleanup_if_error);
+ cleanup_if_error.release ();
return;
}
if (*p)
{
const char *cmd = p;
- char *arg;
- int was_sync = sync_execution;
+ const char *arg;
+ int was_sync = current_ui->prompt_state == PROMPT_BLOCKED;
line = p;
/* If trace-commands is set then this will print this command. */
- print_command_trace (p);
+ print_command_trace ("%s", p);
c = lookup_cmd (&cmd, cmdlist, "", 0, 1);
- p = (char *) cmd;
+ p = cmd;
+
+ scoped_restore save_repeat_args
+ = make_scoped_restore (&repeat_arguments, nullptr);
+ const char *args_pointer = p;
/* Pass null arg rather than an empty one. */
arg = *p ? p : 0;
is_complete_command hack is testing for. */
/* Clear off trailing whitespace, except for set and complete
command. */
+ std::string without_whitespace;
if (arg
&& c->type != set_cmd
&& !is_complete_command (c))
{
- p = arg + strlen (arg) - 1;
+ const char *old_end = arg + strlen (arg) - 1;
+ p = old_end;
while (p >= arg && (*p == ' ' || *p == '\t'))
p--;
- *(p + 1) = '\0';
+ if (p != old_end)
+ {
+ without_whitespace = std::string (arg, p + 1);
+ arg = without_whitespace.c_str ();
+ }
}
/* If this command has been pre-hooked, run the hook first. */
/* If this command has been post-hooked, run the hook last. */
execute_cmd_post_hook (c);
+ if (repeat_arguments != NULL && cmd_start == saved_command_line)
+ {
+ gdb_assert (strlen (args_pointer) >= strlen (repeat_arguments));
+ strcpy (saved_command_line + (args_pointer - cmd_start),
+ repeat_arguments);
+ }
}
- check_frame_language_change ();
+ /* Only perform the frame-language-change check if the command
+ we just finished executing did not resume the inferior's execution.
+ If it did resume the inferior, we will do that check after
+ the inferior stopped. */
+ if (has_stack_frames () && inferior_thread ()->state != THREAD_RUNNING)
+ check_frame_language_change ();
- do_cleanups (cleanup);
- discard_cleanups (cleanup_if_error);
+ cleanup_if_error.release ();
}
/* Run execute_command for P and FROM_TTY. Capture its output into the
returned string, do not display it to the screen. BATCH_FLAG will be
temporarily set to true. */
-char *
-execute_command_to_string (char *p, int from_tty)
+std::string
+execute_command_to_string (const char *p, int from_tty,
+ bool term_out)
{
- struct ui_file *str_file;
- struct cleanup *cleanup;
- char *retval;
-
/* GDB_STDOUT should be better already restored during these
restoration callbacks. */
- cleanup = set_batch_flag_and_make_cleanup_restore_page_info ();
-
- make_cleanup_restore_integer (&interpreter_async);
- interpreter_async = 0;
-
- str_file = mem_fileopen ();
-
- make_cleanup_ui_file_delete (str_file);
- make_cleanup_restore_ui_file (&gdb_stdout);
- make_cleanup_restore_ui_file (&gdb_stderr);
- make_cleanup_restore_ui_file (&gdb_stdlog);
- make_cleanup_restore_ui_file (&gdb_stdtarg);
- make_cleanup_restore_ui_file (&gdb_stdtargerr);
+ set_batch_flag_and_restore_page_info save_page_info;
- if (ui_out_redirect (current_uiout, str_file) < 0)
- warning (_("Current output protocol does not support redirection"));
- else
- make_cleanup_ui_out_redirect_pop (current_uiout);
-
- gdb_stdout = str_file;
- gdb_stderr = str_file;
- gdb_stdlog = str_file;
- gdb_stdtarg = str_file;
- gdb_stdtargerr = str_file;
-
- execute_command (p, from_tty);
-
- retval = ui_file_xstrdup (str_file, NULL);
+ scoped_restore save_async = make_scoped_restore (¤t_ui->async, 0);
- do_cleanups (cleanup);
+ string_file str_file (term_out);
- return retval;
+ {
+ current_uiout->redirect (&str_file);
+ ui_out_redirect_pop redirect_popper (current_uiout);
+
+ scoped_restore save_stdout
+ = make_scoped_restore (&gdb_stdout, &str_file);
+ scoped_restore save_stderr
+ = make_scoped_restore (&gdb_stderr, &str_file);
+ scoped_restore save_stdlog
+ = make_scoped_restore (&gdb_stdlog, &str_file);
+ scoped_restore save_stdtarg
+ = make_scoped_restore (&gdb_stdtarg, &str_file);
+ scoped_restore save_stdtargerr
+ = make_scoped_restore (&gdb_stdtargerr, &str_file);
+
+ execute_command (p, from_tty);
+ }
+
+ return std::move (str_file.string ());
}
-/* Read commands from `instream' and execute them
- until end of file or error reading instream. */
-
-void
-command_loop (void)
-{
- struct cleanup *old_chain;
- char *command;
-
- while (instream && !feof (instream))
- {
- clear_quit_flag ();
- if (instream == stdin)
- reinitialize_more_filter ();
- old_chain = make_cleanup (null_cleanup, 0);
-
- /* Get a command-line. This calls the readline package. */
- command = command_line_input (instream == stdin ?
- get_prompt () : (char *) NULL,
- instream == stdin, "prompt");
- if (command == 0)
- {
- do_cleanups (old_chain);
- return;
- }
-
- make_command_stats_cleanup (1);
-
- /* Do not execute commented lines. */
- if (command[0] != '#')
- {
- execute_command (command, instream == stdin);
-
- /* Do any commands attached to breakpoint we are stopped at. */
- bpstat_do_actions ();
- }
- do_cleanups (old_chain);
- }
-}
\f
/* When nonzero, cause dont_repeat to do nothing. This should only be
set via prevent_dont_repeat. */
void
dont_repeat (void)
{
+ struct ui *ui = current_ui;
+
if (suppress_dont_repeat || server_command)
return;
/* If we aren't reading from standard input, we are saving the last
thing read from stdin in line and don't want to delete it. Null
lines won't repeat here in any case. */
- if (instream == stdin)
+ if (ui->instream == ui->stdin_stream)
*saved_command_line = 0;
}
/* Prevent dont_repeat from working, and return a cleanup that
restores the previous state. */
-struct cleanup *
+scoped_restore_tmpl<int>
prevent_dont_repeat (void)
{
- struct cleanup *result = make_cleanup_restore_integer (&suppress_dont_repeat);
-
- suppress_dont_repeat = 1;
- return result;
+ return make_scoped_restore (&suppress_dont_repeat, 1);
}
\f
gdb_readline_no_editing (const char *prompt)
{
struct buffer line_buffer;
+ struct ui *ui = current_ui;
+ /* Read from stdin if we are executing a user defined command. This
+ is the right thing for prompt_for_continue, at least. */
+ FILE *stream = ui->instream != NULL ? ui->instream : stdin;
+ int fd = fileno (stream);
buffer_init (&line_buffer);
while (1)
{
int c;
+ fd_set readfds;
- /* Read from stdin if we are executing a user defined command.
- This is the right thing for prompt_for_continue, at least. */
- c = fgetc (instream ? instream : stdin);
+ QUIT;
+
+ /* Wait until at least one byte of data is available. Control-C
+ can interrupt interruptible_select, but not fgetc. */
+ FD_ZERO (&readfds);
+ FD_SET (fd, &readfds);
+ if (interruptible_select (fd + 1, &readfds, NULL, NULL, NULL) == -1)
+ {
+ if (errno == EINTR)
+ {
+ /* If this was ctrl-c, the QUIT above handles it. */
+ continue;
+ }
+ perror_with_name (("select"));
+ }
+
+ c = fgetc (stream);
if (c == EOF)
{
static void (*saved_after_char_processing_hook) (void);
-/* The number of nested readline secondary prompts that are currently
- active. */
-
-static int gdb_secondary_prompt_depth = 0;
-
/* See top.h. */
int
-gdb_in_secondary_prompt_p (void)
+gdb_in_secondary_prompt_p (struct ui *ui)
{
- return gdb_secondary_prompt_depth > 0;
+ return ui->secondary_prompt_depth > 0;
}
text. */
static void
-gdb_readline_wrapper_line (char *line)
+gdb_readline_wrapper_line (gdb::unique_xmalloc_ptr<char> &&line)
{
gdb_assert (!gdb_readline_wrapper_done);
- gdb_readline_wrapper_result = line;
+ gdb_readline_wrapper_result = line.release ();
gdb_readline_wrapper_done = 1;
/* Prevent operate-and-get-next from acting too early. */
we're handling an asynchronous target event and running in the
background, just before returning to the event loop to process
further input (or more target events). */
- if (async_command_editing_p)
+ if (current_ui->command_editing)
gdb_rl_callback_handler_remove ();
}
-struct gdb_readline_wrapper_cleanup
+class gdb_readline_wrapper_cleanup
+{
+public:
+ gdb_readline_wrapper_cleanup ()
+ : m_handler_orig (current_ui->input_handler),
+ m_already_prompted_orig (current_ui->command_editing
+ ? rl_already_prompted : 0),
+ m_target_is_async_orig (target_is_async_p ()),
+ m_save_ui (¤t_ui)
{
- void (*handler_orig) (char *);
- int already_prompted_orig;
+ current_ui->input_handler = gdb_readline_wrapper_line;
+ current_ui->secondary_prompt_depth++;
- /* Whether the target was async. */
- int target_is_async_orig;
- };
+ if (m_target_is_async_orig)
+ target_async (0);
+ }
-static void
-gdb_readline_wrapper_cleanup (void *arg)
-{
- struct gdb_readline_wrapper_cleanup *cleanup
- = (struct gdb_readline_wrapper_cleanup *) arg;
+ ~gdb_readline_wrapper_cleanup ()
+ {
+ struct ui *ui = current_ui;
- rl_already_prompted = cleanup->already_prompted_orig;
+ if (ui->command_editing)
+ rl_already_prompted = m_already_prompted_orig;
- gdb_assert (input_handler == gdb_readline_wrapper_line);
- input_handler = cleanup->handler_orig;
+ gdb_assert (ui->input_handler == gdb_readline_wrapper_line);
+ ui->input_handler = m_handler_orig;
- /* Don't restore our input handler in readline yet. That would make
- readline prep the terminal (putting it in raw mode), while the
- line we just read may trigger execution of a command that expects
- the terminal in the default cooked/canonical mode, such as e.g.,
- running Python's interactive online help utility. See
- gdb_readline_wrapper_line for when we'll reinstall it. */
+ /* Don't restore our input handler in readline yet. That would make
+ readline prep the terminal (putting it in raw mode), while the
+ line we just read may trigger execution of a command that expects
+ the terminal in the default cooked/canonical mode, such as e.g.,
+ running Python's interactive online help utility. See
+ gdb_readline_wrapper_line for when we'll reinstall it. */
- gdb_readline_wrapper_result = NULL;
- gdb_readline_wrapper_done = 0;
- gdb_secondary_prompt_depth--;
- gdb_assert (gdb_secondary_prompt_depth >= 0);
+ gdb_readline_wrapper_result = NULL;
+ gdb_readline_wrapper_done = 0;
+ ui->secondary_prompt_depth--;
+ gdb_assert (ui->secondary_prompt_depth >= 0);
- after_char_processing_hook = saved_after_char_processing_hook;
- saved_after_char_processing_hook = NULL;
+ after_char_processing_hook = saved_after_char_processing_hook;
+ saved_after_char_processing_hook = NULL;
- if (cleanup->target_is_async_orig)
- target_async (1);
+ if (m_target_is_async_orig)
+ target_async (1);
+ }
- xfree (cleanup);
-}
+ DISABLE_COPY_AND_ASSIGN (gdb_readline_wrapper_cleanup);
-char *
-gdb_readline_wrapper (const char *prompt)
-{
- struct cleanup *back_to;
- struct gdb_readline_wrapper_cleanup *cleanup;
- char *retval;
+private:
- cleanup = XNEW (struct gdb_readline_wrapper_cleanup);
- cleanup->handler_orig = input_handler;
- input_handler = gdb_readline_wrapper_line;
+ void (*m_handler_orig) (gdb::unique_xmalloc_ptr<char> &&);
+ int m_already_prompted_orig;
- cleanup->already_prompted_orig = rl_already_prompted;
+ /* Whether the target was async. */
+ int m_target_is_async_orig;
- cleanup->target_is_async_orig = target_is_async_p ();
+ /* Processing events may change the current UI. */
+ scoped_restore_tmpl<struct ui *> m_save_ui;
+};
- gdb_secondary_prompt_depth++;
- back_to = make_cleanup (gdb_readline_wrapper_cleanup, cleanup);
+char *
+gdb_readline_wrapper (const char *prompt)
+{
+ struct ui *ui = current_ui;
- if (cleanup->target_is_async_orig)
- target_async (0);
+ gdb_readline_wrapper_cleanup cleanup;
- /* Display our prompt and prevent double prompt display. */
- display_gdb_prompt (prompt);
- rl_already_prompted = 1;
+ /* Display our prompt and prevent double prompt display. Don't pass
+ down a NULL prompt, since that has special meaning for
+ display_gdb_prompt -- it indicates a request to print the primary
+ prompt, while we want a secondary prompt here. */
+ display_gdb_prompt (prompt != NULL ? prompt : "");
+ if (ui->command_editing)
+ rl_already_prompted = 1;
if (after_char_processing_hook)
(*after_char_processing_hook) ();
if (gdb_readline_wrapper_done)
break;
- retval = gdb_readline_wrapper_result;
- do_cleanups (back_to);
- return retval;
+ return gdb_readline_wrapper_result;
}
\f
gdb_safe_append_history (void)
{
int ret, saved_errno;
- char *local_history_filename;
- struct cleanup *old_chain;
- local_history_filename
- = xstrprintf ("%s-gdb%d~", history_filename, getpid ());
- old_chain = make_cleanup (xfree, local_history_filename);
+ std::string local_history_filename
+ = string_printf ("%s-gdb%ld~", history_filename, (long) getpid ());
- ret = rename (history_filename, local_history_filename);
+ ret = rename (history_filename, local_history_filename.c_str ());
saved_errno = errno;
if (ret < 0 && saved_errno != ENOENT)
{
warning (_("Could not rename %s to %s: %s"),
- history_filename, local_history_filename,
+ history_filename, local_history_filename.c_str (),
safe_strerror (saved_errno));
}
else
to move it back anyway. Otherwise a global history file would
never get created! */
gdb_assert (saved_errno == ENOENT);
- write_history (local_history_filename);
+ write_history (local_history_filename.c_str ());
}
else
{
- append_history (command_count, local_history_filename);
+ append_history (command_count, local_history_filename.c_str ());
if (history_is_stifled ())
- history_truncate_file (local_history_filename, history_max_entries);
+ history_truncate_file (local_history_filename.c_str (),
+ history_max_entries);
}
- ret = rename (local_history_filename, history_filename);
+ ret = rename (local_history_filename.c_str (), history_filename);
saved_errno = errno;
if (ret < 0 && saved_errno != EEXIST)
warning (_("Could not rename %s to %s: %s"),
- local_history_filename, history_filename,
+ local_history_filename.c_str (), history_filename,
safe_strerror (saved_errno));
}
-
- do_cleanups (old_chain);
}
-/* Read one line from the command input stream `instream'
- into the local static buffer `linebuffer' (whose current length
- is `linelength').
- The buffer is made bigger as necessary.
- Returns the address of the start of the line.
+/* Read one line from the command input stream `instream' into a local
+ static buffer. The buffer is made bigger as necessary. Returns
+ the address of the start of the line.
NULL is returned for end of file.
- *If* the instream == stdin & stdin is a terminal, the line read
- is copied into the file line saver (global var char *line,
- length linesize) so that it can be duplicated.
-
- This routine either uses fancy command line editing or
- simple input as the user has requested. */
+ This routine either uses fancy command line editing or simple input
+ as the user has requested. */
char *
-command_line_input (const char *prompt_arg, int repeat, char *annotation_suffix)
+command_line_input (const char *prompt_arg, const char *annotation_suffix)
{
- static char *linebuffer = 0;
- static unsigned linelength = 0;
+ static struct buffer cmd_line_buffer;
+ static int cmd_line_buffer_initialized;
+ struct ui *ui = current_ui;
const char *prompt = prompt_arg;
- char *p;
- char *p1;
- char *rl;
- char *nline;
- char got_eof = 0;
+ char *cmd;
+ int from_tty = ui->instream == ui->stdin_stream;
/* The annotation suffix must be non-NULL. */
if (annotation_suffix == NULL)
annotation_suffix = "";
- if (annotation_level > 1 && instream == stdin)
+ if (from_tty && annotation_level > 1)
{
char *local_prompt;
prompt = local_prompt;
}
- if (linebuffer == 0)
+ if (!cmd_line_buffer_initialized)
{
- linelength = 80;
- linebuffer = (char *) xmalloc (linelength);
+ buffer_init (&cmd_line_buffer);
+ cmd_line_buffer_initialized = 1;
}
- p = linebuffer;
+ /* Starting a new command line. */
+ cmd_line_buffer.used_size = 0;
- /* Control-C quits instantly if typed while in this loop
- since it should not wait until the user types a newline. */
- immediate_quit++;
- QUIT;
-#ifdef STOP_SIGNAL
+#ifdef SIGTSTP
if (job_control)
- signal (STOP_SIGNAL, handle_stop_sig);
+ signal (SIGTSTP, handle_sigtstp);
#endif
while (1)
{
+ gdb::unique_xmalloc_ptr<char> rl;
+
/* Make sure that all output has been output. Some machines may
let you get away with leaving out some of the gdb_flush, but
not all. */
gdb_flush (gdb_stdout);
gdb_flush (gdb_stderr);
- if (source_file_name != NULL)
+ if (!source_file_name.empty ())
++source_line_number;
- if (annotation_level > 1 && instream == stdin)
+ if (from_tty && annotation_level > 1)
{
puts_unfiltered ("\n\032\032pre-");
puts_unfiltered (annotation_suffix);
}
/* Don't use fancy stuff if not talking to stdin. */
- if (deprecated_readline_hook && input_from_terminal_p ())
+ if (deprecated_readline_hook
+ && from_tty
+ && input_interactive_p (current_ui))
{
- rl = (*deprecated_readline_hook) (prompt);
+ rl.reset ((*deprecated_readline_hook) (prompt));
}
- else if (command_editing_p && input_from_terminal_p ())
+ else if (command_editing_p
+ && from_tty
+ && input_interactive_p (current_ui))
{
- rl = gdb_readline_wrapper (prompt);
+ rl.reset (gdb_readline_wrapper (prompt));
}
else
{
- rl = gdb_readline_no_editing (prompt);
+ rl.reset (gdb_readline_no_editing (prompt));
}
- if (annotation_level > 1 && instream == stdin)
+ cmd = handle_line_of_input (&cmd_line_buffer, rl.get (),
+ 0, annotation_suffix);
+ if (cmd == (char *) EOF)
{
- puts_unfiltered ("\n\032\032post-");
- puts_unfiltered (annotation_suffix);
- puts_unfiltered ("\n");
- }
-
- if (!rl || rl == (char *) EOF)
- {
- got_eof = 1;
+ cmd = NULL;
break;
}
- if (strlen (rl) + 1 + (p - linebuffer) > linelength)
- {
- linelength = strlen (rl) + 1 + (p - linebuffer);
- nline = (char *) xrealloc (linebuffer, linelength);
- p += nline - linebuffer;
- linebuffer = nline;
- }
- p1 = rl;
- /* Copy line. Don't copy null at end. (Leaves line alone
- if this was just a newline). */
- while (*p1)
- *p++ = *p1++;
-
- xfree (rl); /* Allocated in readline. */
-
- if (p == linebuffer || *(p - 1) != '\\')
+ if (cmd != NULL)
break;
- p--; /* Put on top of '\'. */
+ /* Got partial input. I.e., got a line that ends with a
+ continuation character (backslash). Suppress printing the
+ prompt again. */
prompt = NULL;
}
-#ifdef STOP_SIGNAL
+#ifdef SIGTSTP
if (job_control)
- signal (STOP_SIGNAL, SIG_DFL);
+ signal (SIGTSTP, SIG_DFL);
#endif
- immediate_quit--;
-
- if (got_eof)
- return NULL;
-
-#define SERVER_COMMAND_LENGTH 7
- server_command =
- (p - linebuffer > SERVER_COMMAND_LENGTH)
- && strncmp (linebuffer, "server ", SERVER_COMMAND_LENGTH) == 0;
- if (server_command)
- {
- /* Note that we don't set `line'. Between this and the check in
- dont_repeat, this insures that repeating will still do the
- right thing. */
- *p = '\0';
- return linebuffer + SERVER_COMMAND_LENGTH;
- }
-
- /* Do history expansion if that is wished. */
- if (history_expansion_p && instream == stdin
- && ISATTY (instream))
- {
- char *history_value;
- int expanded;
-
- *p = '\0'; /* Insert null now. */
- expanded = history_expand (linebuffer, &history_value);
- if (expanded)
- {
- /* Print the changes. */
- printf_unfiltered ("%s\n", history_value);
- /* If there was an error, call this function again. */
- if (expanded < 0)
- {
- xfree (history_value);
- return command_line_input (prompt, repeat,
- annotation_suffix);
- }
- if (strlen (history_value) > linelength)
- {
- linelength = strlen (history_value) + 1;
- linebuffer = (char *) xrealloc (linebuffer, linelength);
- }
- strcpy (linebuffer, history_value);
- p = linebuffer + strlen (linebuffer);
- }
- xfree (history_value);
- }
-
- /* If we just got an empty line, and that is supposed to repeat the
- previous command, return the value in the global buffer. */
- if (repeat && p == linebuffer)
- return saved_command_line;
- for (p1 = linebuffer; *p1 == ' ' || *p1 == '\t'; p1++);
- if (repeat && !*p1)
- return saved_command_line;
-
- *p = 0;
-
- /* Add line to history if appropriate. */
- if (*linebuffer && input_from_terminal_p ())
- gdb_add_history (linebuffer);
-
- /* Save into global buffer if appropriate. */
- if (repeat)
- {
- xfree (saved_command_line);
- saved_command_line = xstrdup (linebuffer);
- return saved_command_line;
- }
-
- return linebuffer;
+ return cmd;
}
\f
-/* Print the GDB banner. */
+/* See top.h. */
void
-print_gdb_version (struct ui_file *stream)
+print_gdb_version (struct ui_file *stream, bool interactive)
{
/* From GNU coding standards, first line is meant to be easy for a
program to parse, and is just canonical program name and version
number, which starts after last space. */
- fprintf_filtered (stream, "GNU gdb %s%s\n", PKGVERSION, version);
+ ui_file_style style;
+ if (interactive)
+ {
+ ui_file_style nstyle = { ui_file_style::MAGENTA, ui_file_style::NONE,
+ ui_file_style::BOLD };
+ style = nstyle;
+ }
+ fprintf_styled (stream, style, "GNU gdb %s%s\n", PKGVERSION, version);
/* Second line is a copyright notice. */
fprintf_filtered (stream,
- "Copyright (C) 2016 Free Software Foundation, Inc.\n");
+ "Copyright (C) 2019 Free Software Foundation, Inc.\n");
/* Following the copyright is a brief statement that the program is
free software, that users are free to copy and change it on
fprintf_filtered (stream, "\
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\
\nThis is free software: you are free to change and redistribute it.\n\
-There is NO WARRANTY, to the extent permitted by law. Type \"show copying\"\n\
-and \"show warranty\" for details.\n");
+There is NO WARRANTY, to the extent permitted by law.");
+
+ if (!interactive)
+ return;
+
+ fprintf_filtered (stream, ("\nType \"show copying\" and "
+ "\"show warranty\" for details.\n"));
/* After the required info we print the configuration information. */
{
fprintf_filtered (stream, "%s", host_name);
}
- fprintf_filtered (stream, "\".\n\
-Type \"show configuration\" for configuration details.");
+ fprintf_filtered (stream, "\".\n");
+
+ fprintf_filtered (stream, _("Type \"show configuration\" "
+ "for configuration details.\n"));
if (REPORT_BUGS_TO[0])
{
fprintf_filtered (stream,
- _("\nFor bug reporting instructions, please see:\n"));
+ _("For bug reporting instructions, please see:\n"));
fprintf_filtered (stream, "%s.\n", REPORT_BUGS_TO);
}
fprintf_filtered (stream,
_("Find the GDB manual and other documentation \
-resources online at:\n<http://www.gnu.org/software/gdb/documentation/>.\n"));
+resources online at:\n <http://www.gnu.org/software/gdb/documentation/>."));
+ fprintf_filtered (stream, "\n\n");
fprintf_filtered (stream, _("For help, type \"help\".\n"));
- fprintf_filtered (stream, _("Type \"apropos word\" to search for \
-commands related to \"word\"."));
+ fprintf_filtered (stream,
+ _("Type \"apropos word\" to search for commands \
+related to \"word\"."));
}
/* Print the details of GDB build-time configuration. */
--without-lzma\n\
"));
#endif
+#if HAVE_LIBBABELTRACE
+ fprintf_filtered (stream, _("\
+ --with-babeltrace\n\
+"));
+#else
+ fprintf_filtered (stream, _("\
+ --without-babeltrace\n\
+"));
+#endif
+#if HAVE_LIBIPT
+ fprintf_filtered (stream, _("\
+ --with-intel-pt\n\
+"));
+#else
+ fprintf_filtered (stream, _("\
+ --without-intel-pt\n\
+"));
+#endif
+#if HAVE_LIBMCHECK
+ fprintf_filtered (stream, _("\
+ --enable-libmcheck\n\
+"));
+#else
+ fprintf_filtered (stream, _("\
+ --disable-libmcheck\n\
+"));
+#endif
+#if HAVE_LIBMPFR
+ fprintf_filtered (stream, _("\
+ --with-mpfr\n\
+"));
+#else
+ fprintf_filtered (stream, _("\
+ --without-mpfr\n\
+"));
+#endif
#ifdef WITH_PYTHON_PATH
fprintf_filtered (stream, _("\
--with-python=%s%s\n\
"), WITH_PYTHON_PATH, PYTHON_PATH_RELOCATABLE ? " (relocatable)" : "");
+#else
+ fprintf_filtered (stream, _("\
+ --without-python\n\
+"));
#endif
#if HAVE_GUILE
fprintf_filtered (stream, _("\
--without-guile\n\
"));
#endif
+#if HAVE_SOURCE_HIGHLIGHT
+ fprintf_filtered (stream, _("\
+ --enable-source-highlight\n\
+"));
+#else
+ fprintf_filtered (stream, _("\
+ --disable-source-highlight\n\
+"));
+#endif
#ifdef RELOC_SRCDIR
fprintf_filtered (stream, _("\
--with-relocated-sources=%s\n\
fprintf_filtered (stream, _("\
--with-system-gdbinit=%s%s\n\
"), SYSTEM_GDBINIT, SYSTEM_GDBINIT_RELOCATABLE ? " (relocatable)" : "");
-#if HAVE_LIBBABELTRACE
- fprintf_filtered (stream, _("\
- --with-babeltrace\n\
-"));
-#else
- fprintf_filtered (stream, _("\
- --without-babeltrace\n\
-"));
-#endif
/* We assume "relocatable" will be printed at least once, thus we always
print this text. It's a reasonably safe assumption for now. */
fprintf_filtered (stream, _("\n\
struct qt_args
{
- char *args;
int from_tty;
};
kill_or_detach (struct inferior *inf, void *args)
{
struct qt_args *qt = (struct qt_args *) args;
- struct thread_info *thread;
if (inf->pid == 0)
return 0;
- thread = any_thread_of_process (inf->pid);
+ thread_info *thread = any_thread_of_inferior (inf);
if (thread != NULL)
{
- switch_to_thread (thread->ptid);
+ switch_to_thread (thread);
/* Leave core files alone. */
if (target_has_execution)
{
if (inf->attach_flag)
- target_detach (qt->args, qt->from_tty);
+ target_detach (inf, qt->from_tty);
else
target_kill ();
}
if (inf->attach_flag)
fprintf_filtered (stb,
_("\tInferior %d [%s] will be detached.\n"), inf->num,
- target_pid_to_str (pid_to_ptid (inf->pid)));
+ target_pid_to_str (ptid_t (inf->pid)).c_str ());
else
fprintf_filtered (stb,
_("\tInferior %d [%s] will be killed.\n"), inf->num,
- target_pid_to_str (pid_to_ptid (inf->pid)));
+ target_pid_to_str (ptid_t (inf->pid)).c_str ());
return 0;
}
int
quit_confirm (void)
{
- struct ui_file *stb;
- struct cleanup *old_chain;
- char *str;
- int qr;
-
/* Don't even ask if we're only debugging a core file inferior. */
if (!have_live_inferiors ())
return 1;
/* Build the query string as a single string. */
- stb = mem_fileopen ();
- old_chain = make_cleanup_ui_file_delete (stb);
-
- fprintf_filtered (stb, _("A debugging session is active.\n\n"));
- iterate_over_inferiors (print_inferior_quit_action, stb);
- fprintf_filtered (stb, _("\nQuit anyway? "));
+ string_file stb;
- str = ui_file_xstrdup (stb, NULL);
- make_cleanup (xfree, str);
+ stb.puts (_("A debugging session is active.\n\n"));
+ iterate_over_inferiors (print_inferior_quit_action, &stb);
+ stb.puts (_("\nQuit anyway? "));
- qr = query ("%s", str);
- do_cleanups (old_chain);
- return qr;
+ return query ("%s", stb.c_str ());
}
/* Prepare to exit GDB cleanly by undoing any changes made to the
static void
undo_terminal_modifications_before_exit (void)
{
- target_terminal_ours ();
+ struct ui *saved_top_level = current_ui;
+
+ target_terminal::ours ();
+
+ current_ui = main_ui;
+
#if defined(TUI)
tui_disable ();
#endif
- if (async_command_editing_p)
- gdb_disable_readline ();
+ gdb_disable_readline ();
+
+ current_ui = saved_top_level;
}
/* Quit without asking for confirmation. */
void
-quit_force (char *args, int from_tty)
+quit_force (int *exit_arg, int from_tty)
{
int exit_code = 0;
struct qt_args qt;
undo_terminal_modifications_before_exit ();
- /* An optional expression may be used to cause gdb to terminate with the
+ /* An optional expression may be used to cause gdb to terminate with the
value of that expression. */
- if (args)
- {
- struct value *val = parse_and_eval (args);
-
- exit_code = (int) value_as_long (val);
- }
+ if (exit_arg)
+ exit_code = *exit_arg;
else if (return_child_result)
exit_code = return_child_result_value;
- qt.args = args;
qt.from_tty = from_tty;
/* We want to handle any quit errors and exit regardless. */
/* Get out of tfind mode, and kill or detach all inferiors. */
- TRY
+ try
{
disconnect_tracing ();
iterate_over_inferiors (kill_or_detach, &qt);
}
- CATCH (ex, RETURN_MASK_ALL)
+ catch (const gdb_exception &ex)
{
exception_print (gdb_stderr, ex);
}
- END_CATCH
/* Give all pushed targets a chance to do minimal cleanup, and pop
them all out. */
- TRY
+ try
{
pop_all_targets ();
}
- CATCH (ex, RETURN_MASK_ALL)
+ catch (const gdb_exception &ex)
{
exception_print (gdb_stderr, ex);
}
- END_CATCH
/* Save the history information if it is appropriate to do so. */
- TRY
+ try
{
- if (write_history_p && history_filename
- && input_from_terminal_p ())
- gdb_safe_append_history ();
+ if (write_history_p && history_filename)
+ {
+ struct ui *ui;
+ int save = 0;
+
+ /* History is currently shared between all UIs. If there's
+ any UI with a terminal, save history. */
+ ALL_UIS (ui)
+ {
+ if (input_interactive_p (ui))
+ {
+ save = 1;
+ break;
+ }
+ }
+
+ if (save)
+ gdb_safe_append_history ();
+ }
}
- CATCH (ex, RETURN_MASK_ALL)
+ catch (const gdb_exception &ex)
{
exception_print (gdb_stderr, ex);
}
- END_CATCH
+
+ /* Destroy any values currently allocated now instead of leaving it
+ to global destructors, because that may be too late. For
+ example, the destructors of xmethod values call into the Python
+ runtime, which is finalized via a final cleanup. */
+ finalize_values ();
/* Do any final cleanups before exiting. */
- TRY
+ try
{
- do_final_cleanups (all_cleanups ());
+ do_final_cleanups ();
}
- CATCH (ex, RETURN_MASK_ALL)
+ catch (const gdb_exception &ex)
{
exception_print (gdb_stderr, ex);
}
- END_CATCH
exit (exit_code);
}
-/* Returns whether GDB is running on a terminal and input is
- currently coming from that terminal. */
+/* The value of the "interactive-mode" setting. */
+static enum auto_boolean interactive_mode = AUTO_BOOLEAN_AUTO;
+
+/* Implement the "show interactive-mode" option. */
+
+static void
+show_interactive_mode (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c,
+ const char *value)
+{
+ if (interactive_mode == AUTO_BOOLEAN_AUTO)
+ fprintf_filtered (file, "Debugger's interactive mode "
+ "is %s (currently %s).\n",
+ value, input_interactive_p (current_ui) ? "on" : "off");
+ else
+ fprintf_filtered (file, "Debugger's interactive mode is %s.\n", value);
+}
+
+/* Returns whether GDB is running on an interactive terminal. */
int
-input_from_terminal_p (void)
+input_interactive_p (struct ui *ui)
{
if (batch_flag)
return 0;
- if (gdb_has_a_terminal () && instream == stdin)
- return 1;
-
- /* If INSTREAM is unset, and we are not in a user command, we
- must be in Insight. That's like having a terminal, for our
- purposes. */
- if (instream == NULL && !in_user_command)
- return 1;
+ if (interactive_mode != AUTO_BOOLEAN_AUTO)
+ return interactive_mode == AUTO_BOOLEAN_TRUE;
- return 0;
+ return ui->input_interactive_p;
}
\f
static void
-dont_repeat_command (char *ignored, int from_tty)
+dont_repeat_command (const char *ignored, int from_tty)
{
/* Can't call dont_repeat here because we're not necessarily reading
from stdin. */
/* Number of commands to print in each call to show_commands. */
#define Hist_print 10
void
-show_commands (char *args, int from_tty)
+show_commands (const char *args, int from_tty)
{
/* Index for history commands. Relative to history_base. */
int offset;
"show commands +" does. This is unnecessary if arg is null,
because "show commands +" is not useful after "show commands". */
if (from_tty && args)
- {
- args[0] = '+';
- args[1] = '\0';
- }
+ set_repeat_arguments ("+");
}
/* Update the size of our command history file to HISTORY_SIZE.
/* Called by do_setshow_command. */
static void
-set_history_size_command (char *args, int from_tty, struct cmd_list_element *c)
+set_history_size_command (const char *args,
+ int from_tty, struct cmd_list_element *c)
{
set_readline_history_size (history_size_setshow_var);
}
void
-set_history (char *args, int from_tty)
+set_history (const char *args, int from_tty)
{
printf_unfiltered (_("\"set history\" must be followed "
"by the name of a history subcommand.\n"));
}
void
-show_history (char *args, int from_tty)
+show_history (const char *args, int from_tty)
{
cmd_show_list (showhistlist, from_tty, "");
}
int info_verbose = 0; /* Default verbose msgs off. */
-/* Called by do_setshow_command. An elaborate joke. */
+/* Called by do_set_command. An elaborate joke. */
void
-set_verbose (char *args, int from_tty, struct cmd_list_element *c)
+set_verbose (const char *args, int from_tty, struct cmd_list_element *c)
{
const char *cmdname = "verbose";
struct cmd_list_element *showcmd;
showcmd = lookup_cmd_1 (&cmdname, showlist, NULL, 1);
gdb_assert (showcmd != NULL && showcmd != CMD_LIST_AMBIGUOUS);
+ if (c->doc && c->doc_allocated)
+ xfree ((char *) c->doc);
+ if (showcmd->doc && showcmd->doc_allocated)
+ xfree ((char *) showcmd->doc);
if (info_verbose)
{
- c->doc = "Set verbose printing of informational messages.";
- showcmd->doc = "Show verbose printing of informational messages.";
+ c->doc = _("Set verbose printing of informational messages.");
+ showcmd->doc = _("Show verbose printing of informational messages.");
}
else
{
- c->doc = "Set verbosity.";
- showcmd->doc = "Show verbosity.";
+ c->doc = _("Set verbosity.");
+ showcmd->doc = _("Show verbosity.");
}
+ c->doc_allocated = 0;
+ showcmd->doc_allocated = 0;
}
/* Init the history buffer. Note that we are called after the init file(s)
void
init_history (void)
{
- char *tmpenv;
+ const char *tmpenv;
tmpenv = getenv ("GDBHISTSIZE");
if (tmpenv)
fprintf_filtered (file, _("Gdb's prompt is \"%s\".\n"), value);
}
+/* "set editing" command. */
+
+static void
+set_editing (const char *args, int from_tty, struct cmd_list_element *c)
+{
+ change_line_handler (set_editing_cmd_var);
+ /* Update the control variable so that MI's =cmd-param-changed event
+ shows the correct value. */
+ set_editing_cmd_var = current_ui->command_editing;
+}
+
static void
-show_async_command_editing_p (struct ui_file *file, int from_tty,
- struct cmd_list_element *c, const char *value)
+show_editing (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
{
fprintf_filtered (file, _("Editing of command lines as "
"they are typed is %s.\n"),
- value);
+ current_ui->command_editing ? _("on") : _("off"));
}
static void
/* "set" command for the gdb_datadir configuration variable. */
static void
-set_gdb_datadir (char *args, int from_tty, struct cmd_list_element *c)
+set_gdb_datadir (const char *args, int from_tty, struct cmd_list_element *c)
{
set_gdb_data_directory (staged_gdb_datadir);
- observer_notify_gdb_datadir_changed ();
+ gdb::observers::gdb_datadir_changed.notify ();
}
/* "show" command for the gdb_datadir configuration variable. */
}
static void
-set_history_filename (char *args, int from_tty, struct cmd_list_element *c)
+set_history_filename (const char *args,
+ int from_tty, struct cmd_list_element *c)
{
/* We include the current directory so that if the user changes
directories the file written will be the same as the one
history_filename, (char *) NULL);
}
+static void
+init_gdb_version_vars (void)
+{
+ struct internalvar *major_version_var = create_internalvar ("_gdb_major");
+ struct internalvar *minor_version_var = create_internalvar ("_gdb_minor");
+ int vmajor = 0, vminor = 0, vrevision = 0;
+ sscanf (version, "%d.%d.%d", &vmajor, &vminor, &vrevision);
+ set_internalvar_integer (major_version_var, vmajor);
+ set_internalvar_integer (minor_version_var, vminor + (vrevision > 0));
+}
+
static void
init_main (void)
{
+ struct cmd_list_element *c;
+
/* Initialize the prompt to a simple "(gdb) " prompt or to whatever
the DEFAULT_PROMPT is. */
set_prompt (DEFAULT_PROMPT);
/* Setup important stuff for command line editing. */
rl_completion_word_break_hook = gdb_completion_word_break_characters;
- rl_completion_entry_function = readline_line_completion_function;
- rl_completer_word_break_characters = default_word_break_characters ();
+ rl_attempted_completion_function = gdb_rl_attempted_completion_function;
+ set_rl_completer_word_break_characters (default_word_break_characters ());
rl_completer_quote_characters = get_gdb_completer_quote_characters ();
rl_completion_display_matches_hook = cli_display_match_list;
rl_readline_name = "gdb";
hitting return."));
add_setshow_boolean_cmd ("editing", class_support,
- &async_command_editing_p, _("\
+ &set_editing_cmd_var, _("\
Set editing of command lines as they are typed."), _("\
Show editing of command lines as they are typed."), _("\
Use \"on\" to enable the editing, and \"off\" to disable it.\n\
Without an argument, command line editing is enabled. To edit, use\n\
EMACS-like or VI-like commands like control-P or ESC."),
- set_async_editing_command,
- show_async_command_editing_p,
+ set_editing,
+ show_editing,
&setlist, &showlist);
add_setshow_boolean_cmd ("save", no_class, &write_history_p, _("\
set_gdb_datadir, show_gdb_datadir,
&setlist,
&showlist);
+
+ add_setshow_auto_boolean_cmd ("interactive-mode", class_support,
+ &interactive_mode, _("\
+Set whether GDB's standard input is a terminal."), _("\
+Show whether GDB's standard input is a terminal."), _("\
+If on, GDB assumes that standard input is a terminal. In practice, it\n\
+means that GDB should wait for the user to answer queries associated to\n\
+commands entered at the command prompt. If off, GDB assumes that standard\n\
+input is not a terminal, and uses the default answer to all queries.\n\
+If auto (the default), determine which mode to use based on the standard\n\
+input settings."),
+ NULL,
+ show_interactive_mode,
+ &setlist, &showlist);
+
+ c = add_cmd ("new-ui", class_support, new_ui_command, _("\
+Create a new UI. It takes two arguments:\n\
+The first argument is the name of the interpreter to run.\n\
+The second argument is the terminal the UI runs on.\n"), &cmdlist);
+ set_cmd_completer (c, interpreter_completer);
}
void
prefix to be installed. Keep things simple and just do final
script initialization here. */
finish_ext_lang_initialization ();
+
+ /* Create $_gdb_major and $_gdb_minor convenience variables. */
+ init_gdb_version_vars ();
}