/* Top level stuff for GDB, the GNU debugger.
- Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
- 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
+
+ Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994,
+ 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+ Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
#include "defs.h"
#include "gdbcmd.h"
#include "call-cmds.h"
+#include "cli/cli-cmds.h"
+#include "cli/cli-script.h"
+#include "cli/cli-setshow.h"
+#include "cli/cli-decode.h"
#include "symtab.h"
#include "inferior.h"
+#include "exceptions.h"
#include <signal.h>
#include "target.h"
#include "breakpoint.h"
#include "completer.h"
#include "top.h"
#include "version.h"
+#include "serial.h"
+#include "doublest.h"
+#include "gdb_assert.h"
+#include "main.h"
/* readline include files */
-#include <readline/readline.h>
-#include <readline/history.h>
+#include "readline/readline.h"
+#include "readline/history.h"
/* readline defines this. */
#undef savestring
#include <sys/types.h>
-#include <setjmp.h>
-
#include "event-top.h"
#include "gdb_string.h"
#include "gdb_stat.h"
#include <ctype.h>
-#ifdef UI_OUT
#include "ui-out.h"
#include "cli-out.h"
-#endif
-
-/* From completer.c */
-
-extern int is_complete_command (void (*func) (char *args, int from_tty));
-
-/* From cli/cli-cmds.c */
-
-extern void init_cmd_lists (void);
-
-extern void init_cli_cmds (void);
-
-extern void execute_user_command (struct cmd_list_element *c, char *args);
-
-/* From cli/cli-setshow.c */
-
-extern void do_setshow_command (char *, int, struct cmd_list_element *);
-
-/* Exported to CLI cli/cli-cmds.c. */
-
-void set_verbose (char *, int, struct cmd_list_element *);
-
-void show_history (char *, int);
-
-void set_history (char *, int);
-
-void show_commands (char *, int);
-
-void do_restore_instream_cleanup (void *stream);
-
-/* Prototypes for local functions */
-
-static void dont_repeat_command (char *, int);
-
-static void init_signals (void);
-
-#ifdef STOP_SIGNAL
-static void stop_sig (int);
-#endif
-
-static char *readline_line_completion_function (char *, int);
-
-static void init_main (void);
-
-static void float_handler (int);
-
-static void init_signals (void);
-
-static void set_history_size_command (char *, int, struct cmd_list_element *);
-
-static void do_nothing (int);
-
-#ifdef SIGHUP
-/* NOTE 1999-04-29: This function will be static again, once we modify
- gdb to use the event loop as the default command loop and we merge
- event-top.c into this file, top.c */
-/* static */ int quit_cover (PTR);
-
-static void disconnect (int);
-#endif
/* Default command line prompt. This is overriden in some configs. */
/* Initialization file name for gdb. This is overridden in some configs. */
+#ifndef PATH_MAX
+# ifdef FILENAME_MAX
+# define PATH_MAX FILENAME_MAX
+# else
+# define PATH_MAX 512
+# endif
+#endif
+
#ifndef GDBINIT_FILENAME
#define GDBINIT_FILENAME ".gdbinit"
#endif
-char gdbinit[] = GDBINIT_FILENAME;
+char gdbinit[PATH_MAX + 1] = GDBINIT_FILENAME;
int inhibit_gdbinit = 0;
/* If nonzero, and GDB has been configured to be able to use windows,
attempt to open them upon startup. */
-int use_windows = 1;
+int use_windows = 0;
extern char lang_frame_mismatch_warn[]; /* language.c */
/* Flag for whether we want all the "from_tty" gubbish printed. */
int caution = 1; /* Default is yes, sigh. */
+static void
+show_caution (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Whether to confirm potentially dangerous operations is %s.\n"),
+ value);
+}
/* stdio stream that command input is being read from. Set to stdin normally.
Set by source_command to the file we are sourcing. Set to NULL if we are
FILE *instream;
+/* Flag to indicate whether a user defined command is currently running. */
+
+int in_user_command;
+
/* Current working directory. */
char *current_directory;
/* gdb prints this when reading a command interactively */
static char *gdb_prompt_string; /* the global prompt string */
-extern char *get_prompt (void); /* access function for prompt string */
/* Buffer used for reading command lines, and the size
allocated for it so far. */
In mid-1996, remote_timeout was moved from remote.c to top.c and
it began being used in other remote-* targets. It appears that the
default was changed to 20 seconds at that time, perhaps because the
- Hitachi E7000 ICE didn't always respond in a timely manner.
+ Renesas E7000 ICE didn't always respond in a timely manner.
But if 5 seconds is a long time to sit and wait for retransmissions,
20 seconds is far worse. This demonstrates the difficulty of using
target is off and running, which gdb is doing something else. */
int target_executing = 0;
-/* Level of control structure. */
-static int control_level;
-
-/* Structure for arguments to user defined functions. */
-#define MAXUSERARGS 10
-struct user_args
- {
- struct user_args *next;
- struct
- {
- char *arg;
- int len;
- }
- a[MAXUSERARGS];
- int count;
- }
- *user_args;
+/* Sbrk location on entry to main. Used for statistics only. */
+#ifdef HAVE_SBRK
+char *lim_at_start;
+#endif
/* Signal to catch ^Z typed while reading a command: SIGTSTP or SIGCONT. */
#endif
#endif
-/* Some System V have job control but not sigsetmask(). */
-#if !defined (HAVE_SIGSETMASK)
-#if !defined (USG)
-#define HAVE_SIGSETMASK 1
-#else
-#define HAVE_SIGSETMASK 0
-#endif
-#endif
-
-#if 0 == (HAVE_SIGSETMASK)
-#define sigsetmask(n)
-#endif
-
/* Hooks for alternate command interfaces. */
/* Called after most modules have been initialized, but before taking users
- command file. */
+ command file.
+
+ If the UI fails to initialize and it wants GDB to continue
+ using the default UI, then it should clear this hook before returning. */
-void (*init_ui_hook) (char *argv0);
+void (*deprecated_init_ui_hook) (char *argv0);
/* This hook is called from within gdb's many mini-event loops which could
steal control from a real user interface's event loop. It returns
non-zero if the user is requesting a detach, zero otherwise. */
-int (*ui_loop_hook) (int);
+int (*deprecated_ui_loop_hook) (int);
/* Called instead of command_loop at top level. Can be invoked via
- return_to_top_level. */
+ throw_exception(). */
-void (*command_loop_hook) (void);
+void (*deprecated_command_loop_hook) (void);
/* Called from print_frame_info to list the line we stopped in. */
-void (*print_frame_info_listing_hook) (struct symtab * s, int line,
- int stopline, int noerror);
+void (*deprecated_print_frame_info_listing_hook) (struct symtab * s, int line,
+ int stopline, int noerror);
/* Replaces most of query. */
-int (*query_hook) (const char *, va_list);
+int (*deprecated_query_hook) (const char *, va_list);
/* Replaces most of warning. */
-void (*warning_hook) (const char *, va_list);
+void (*deprecated_warning_hook) (const char *, va_list);
-/* These three functions support getting lines of text from the user. They
- are used in sequence. First readline_begin_hook is called with a text
- string that might be (for example) a message for the user to type in a
- sequence of commands to be executed at a breakpoint. If this function
- calls back to a GUI, it might take this opportunity to pop up a text
- interaction window with this message. Next, readline_hook is called
- with a prompt that is emitted prior to collecting the user input.
- It can be called multiple times. Finally, readline_end_hook is called
- to notify the GUI that we are done with the interaction window and it
- can close it. */
+/* These three functions support getting lines of text from the user.
+ They are used in sequence. First deprecated_readline_begin_hook is
+ called with a text string that might be (for example) a message for
+ the user to type in a sequence of commands to be executed at a
+ breakpoint. If this function calls back to a GUI, it might take
+ this opportunity to pop up a text interaction window with this
+ message. Next, deprecated_readline_hook is called with a prompt
+ that is emitted prior to collecting the user input. It can be
+ called multiple times. Finally, deprecated_readline_end_hook is
+ called to notify the GUI that we are done with the interaction
+ window and it can close it. */
-void (*readline_begin_hook) (char *, ...);
-char *(*readline_hook) (char *);
-void (*readline_end_hook) (void);
+void (*deprecated_readline_begin_hook) (char *, ...);
+char *(*deprecated_readline_hook) (char *);
+void (*deprecated_readline_end_hook) (void);
/* Called as appropriate to notify the interface of the specified breakpoint
conditions. */
-void (*create_breakpoint_hook) (struct breakpoint * bpt);
-void (*delete_breakpoint_hook) (struct breakpoint * bpt);
-void (*modify_breakpoint_hook) (struct breakpoint * bpt);
+void (*deprecated_create_breakpoint_hook) (struct breakpoint * bpt);
+void (*deprecated_delete_breakpoint_hook) (struct breakpoint * bpt);
+void (*deprecated_modify_breakpoint_hook) (struct breakpoint * bpt);
/* Called as appropriate to notify the interface that we have attached
to or detached from an already running process. */
-void (*attach_hook) (void);
-void (*detach_hook) (void);
+void (*deprecated_attach_hook) (void);
+void (*deprecated_detach_hook) (void);
/* Called during long calculations to allow GUI to repair window damage, and to
check for stop buttons, etc... */
-void (*interactive_hook) (void);
+void (*deprecated_interactive_hook) (void);
/* Called when the registers have changed, as a hint to a GUI
to minimize window update. */
-void (*registers_changed_hook) (void);
+void (*deprecated_registers_changed_hook) (void);
/* Tell the GUI someone changed the register REGNO. -1 means
that the caller does not know which register changed or
that several registers have changed (see value_assign). */
-void (*register_changed_hook) (int regno);
+void (*deprecated_register_changed_hook) (int regno);
/* Tell the GUI someone changed LEN bytes of memory at ADDR */
-void (*memory_changed_hook) (CORE_ADDR addr, int len);
+void (*deprecated_memory_changed_hook) (CORE_ADDR addr, int len);
/* Called when going to wait for the target. Usually allows the GUI to run
while waiting for target events. */
-int (*target_wait_hook) (int pid, struct target_waitstatus * status);
+ptid_t (*deprecated_target_wait_hook) (ptid_t ptid,
+ struct target_waitstatus * status);
/* Used by UI as a wrapper around command execution. May do various things
like enabling/disabling buttons, etc... */
-void (*call_command_hook) (struct cmd_list_element * c, char *cmd,
- int from_tty);
+void (*deprecated_call_command_hook) (struct cmd_list_element * c, char *cmd,
+ int from_tty);
/* Called after a `set' command has finished. Is only run if the
`set' command succeeded. */
-void (*set_hook) (struct cmd_list_element * c);
+void (*deprecated_set_hook) (struct cmd_list_element * c);
/* Called when the current thread changes. Argument is thread id. */
-void (*context_hook) (int id);
+void (*deprecated_context_hook) (int id);
/* Takes control from error (). Typically used to prevent longjmps out of the
middle of the GUI. Usually used in conjunction with a catch routine. */
-NORETURN void (*error_hook) (void) ATTR_NORETURN;
-\f
-
-/* One should use catch_errors rather than manipulating these
- directly. */
-#if defined(HAVE_SIGSETJMP)
-#define SIGJMP_BUF sigjmp_buf
-#define SIGSETJMP(buf) sigsetjmp(buf, 1)
-#define SIGLONGJMP(buf,val) siglongjmp(buf,val)
-#else
-#define SIGJMP_BUF jmp_buf
-#define SIGSETJMP(buf) setjmp(buf)
-#define SIGLONGJMP(buf,val) longjmp(buf,val)
-#endif
-
-/* Where to go for return_to_top_level. */
-static SIGJMP_BUF *catch_return;
-
-/* Return for reason REASON to the nearest containing catch_errors(). */
-
-NORETURN void
-return_to_top_level (enum return_reason reason)
-{
- quit_flag = 0;
- immediate_quit = 0;
-
- /* Perhaps it would be cleaner to do this via the cleanup chain (not sure
- I can think of a reason why that is vital, though). */
- bpstat_clear_actions (stop_bpstat); /* Clear queued breakpoint commands */
-
- disable_current_display ();
- do_cleanups (ALL_CLEANUPS);
- if (event_loop_p && target_can_async_p () && !target_executing)
- do_exec_cleanups (ALL_CLEANUPS);
- if (event_loop_p && sync_execution)
- do_exec_error_cleanups (ALL_CLEANUPS);
-
- if (annotation_level > 1)
- switch (reason)
- {
- case RETURN_QUIT:
- annotate_quit ();
- break;
- case RETURN_ERROR:
- annotate_error ();
- break;
- }
-
- /* Jump to the containing catch_errors() call, communicating REASON
- to that call via setjmp's return value. Note that REASON can't
- be zero, by definition in defs.h. */
-
- (NORETURN void) SIGLONGJMP (*catch_return, (int) reason);
-}
-
-/* Call FUNC with arg ARGS, catching any errors. If there is no
- error, return the value returned by FUNC. If there is an error,
- print ERRSTRING, print the specific error message, then return
- zero.
-
- Must not be called with immediate_quit in effect (bad things might
- happen, say we got a signal in the middle of a memcpy to quit_return).
- This is an OK restriction; with very few exceptions immediate_quit can
- be replaced by judicious use of QUIT.
-
- MASK specifies what to catch; it is normally set to
- RETURN_MASK_ALL, if for no other reason than that the code which
- calls catch_errors might not be set up to deal with a quit which
- isn't caught. But if the code can deal with it, it generally
- should be RETURN_MASK_ERROR, unless for some reason it is more
- useful to abort only the portion of the operation inside the
- catch_errors. Note that quit should return to the command line
- fairly quickly, even if some further processing is being done. */
-
-/* MAYBE: cagney/1999-11-05: catch_errors() in conjunction with
- error() et.al. could maintain a set of flags that indicate the the
- current state of each of the longjmp buffers. This would give the
- longjmp code the chance to detect a longjmp botch (before it gets
- to longjmperror()). Prior to 1999-11-05 this wasn't possible as
- code also randomly used a SET_TOP_LEVEL macro that directly
- initialize the longjmp buffers. */
-
-/* MAYBE: cagney/1999-11-05: Should the catch_errors and cleanups code
- be consolidated into a single file instead of being distributed
- between utils.c and top.c? */
-
-int
-catch_errors (catch_errors_ftype *func, PTR args, char *errstring,
- return_mask mask)
-{
- SIGJMP_BUF *saved_catch;
- SIGJMP_BUF catch;
- int val;
- struct cleanup *saved_cleanup_chain;
- char *saved_error_pre_print;
- char *saved_quit_pre_print;
-
- /* Return value from SIGSETJMP(): enum return_reason if error or
- quit caught, 0 otherwise. */
- int caught;
-
- /* Override error/quit messages during FUNC. */
-
- saved_error_pre_print = error_pre_print;
- saved_quit_pre_print = quit_pre_print;
-
- if (mask & RETURN_MASK_ERROR)
- error_pre_print = errstring;
- if (mask & RETURN_MASK_QUIT)
- quit_pre_print = errstring;
-
- /* Prevent error/quit during FUNC from calling cleanups established
- prior to here. */
-
- saved_cleanup_chain = save_cleanups ();
-
- /* Call FUNC, catching error/quit events. */
-
- saved_catch = catch_return;
- catch_return = &catch;
- caught = SIGSETJMP (catch);
- if (!caught)
- val = (*func) (args);
- else
- val = 0;
- catch_return = saved_catch;
-
- /* FIXME: cagney/1999-11-05: A correct FUNC implementation will
- clean things up (restoring the cleanup chain) to the state they
- were just prior to the call. Unfortunately, many FUNC's are not
- that well behaved. This could be fixed by adding either a
- do_cleanups call (to cover the problem) or an assertion check to
- detect bad FUNCs code. */
-
- /* Restore the cleanup chain and error/quit messages to their
- original states. */
-
- restore_cleanups (saved_cleanup_chain);
-
- if (mask & RETURN_MASK_QUIT)
- quit_pre_print = saved_quit_pre_print;
- if (mask & RETURN_MASK_ERROR)
- error_pre_print = saved_error_pre_print;
-
- /* Return normally if no error/quit event occurred. */
-
- if (!caught)
- return val;
-
- /* If the caller didn't request that the event be caught, relay the
- event to the next containing catch_errors(). */
-
- if (!(mask & RETURN_MASK (caught)))
- return_to_top_level (caught);
-
- /* Tell the caller that an event was caught.
-
- FIXME: nsd/2000-02-22: When MASK is RETURN_MASK_ALL, the caller
- can't tell what type of event occurred.
-
- A possible fix is to add a new interface, catch_event(), that
- returns enum return_reason after catching an error or a quit.
-
- When returning normally, i.e. without catching an error or a
- quit, catch_event() could return RETURN_NORMAL, which would be
- added to enum return_reason. FUNC would return information
- exclusively via ARGS.
-
- Alternatively, normal catch_event() could return FUNC's return
- value. The caller would need to be aware of potential overlap
- with enum return_reason, which could be publicly restricted to
- negative values to simplify return value processing in FUNC and
- in the caller. */
-
- return 0;
-}
-
-struct captured_command_args
- {
- catch_command_errors_ftype *command;
- char *arg;
- int from_tty;
- };
-
-static int
-do_captured_command (void *data)
-{
- struct captured_command_args *context = data;
- context->command (context->arg, context->from_tty);
- /* FIXME: cagney/1999-11-07: Technically this do_cleanups() call
- isn't needed. Instead an assertion check could be made that
- simply confirmed that the called function correctly cleaned up
- after itself. Unfortunately, old code (prior to 1999-11-04) in
- main.c was calling SET_TOP_LEVEL(), calling the command function,
- and then *always* calling do_cleanups(). For the moment we
- remain ``bug compatible'' with that old code.. */
- do_cleanups (ALL_CLEANUPS);
- return 1;
-}
-
-int
-catch_command_errors (catch_command_errors_ftype * command,
- char *arg, int from_tty, return_mask mask)
-{
- struct captured_command_args args;
- args.command = command;
- args.arg = arg;
- args.from_tty = from_tty;
- return catch_errors (do_captured_command, &args, "", mask);
-}
-
+void (*deprecated_error_hook) (void);
/* Handler for SIGHUP. */
#ifdef SIGHUP
-static void
-disconnect (int signo)
-{
- catch_errors (quit_cover, NULL,
- "Could not kill the program being debugged", RETURN_MASK_ALL);
- signal (SIGHUP, SIG_DFL);
- kill (getpid (), SIGHUP);
-}
-
-/* Just a little helper function for disconnect(). */
-
/* NOTE 1999-04-29: This function will be static again, once we modify
gdb to use the event loop as the default command loop and we merge
event-top.c into this file, top.c */
/* static */ int
-quit_cover (PTR s)
+quit_cover (void *s)
{
caution = 0; /* Throw caution to the wind -- we're exiting.
This prevents asking the user dumb questions. */
event-top.c into this file, top.c */
/* static */ char *source_file_name;
-/* Buffer containing the error_pre_print used by the source stuff.
- Malloc'd. */
-/* NOTE 1999-04-29: This variable will be static again, once we modify
- gdb to use the event loop as the default command loop and we merge
- event-top.c into this file, top.c */
-/* static */ char *source_error;
-static int source_error_allocated;
-
-/* Something to glom on to the start of error_pre_print if source_file_name
- is set. */
-/* NOTE 1999-04-29: This variable will be static again, once we modify
- gdb to use the event loop as the default command loop and we merge
- event-top.c into this file, top.c */
-/* static */ char *source_pre_error;
-
/* Clean up on error during a "source" command (or execution of a
user-defined command). */
do_cleanups (cleanups);
}
\f
-extern void init_proc (void);
-
void (*pre_init_ui_hook) (void);
#ifdef __MSDOS__
}
#endif
-void
-gdb_init (char *argv0)
-{
- if (pre_init_ui_hook)
- pre_init_ui_hook ();
-
- /* Run the init function of each source file */
-
- getcwd (gdb_dirbuf, sizeof (gdb_dirbuf));
- current_directory = gdb_dirbuf;
-
-#ifdef __MSDOS__
- /* Make sure we return to the original directory upon exit, come
- what may, since the OS doesn't do that for us. */
- make_final_cleanup (do_chdir_cleanup, xstrdup (current_directory));
-#endif
-
- init_cmd_lists (); /* This needs to be done first */
- initialize_targets (); /* Setup target_terminal macros for utils.c */
- initialize_utils (); /* Make errors and warnings possible */
- initialize_all_files ();
- initialize_current_architecture ();
- init_cli_cmds();
- init_main (); /* But that omits this file! Do it now */
-
- /* The signal handling mechanism is different depending whether or
- not the async version is run. NOTE: in the future we plan to make
- the event loop be the default engine of gdb, and this difference
- will disappear. */
- if (event_loop_p)
- async_init_signals ();
- else
- init_signals ();
-
- /* We need a default language for parsing expressions, so simple things like
- "set width 0" won't fail if no language is explicitly set in a config file
- or implicitly set by reading an executable during startup. */
- set_language (language_c);
- expected_language = current_language; /* don't warn about the change. */
-
-#ifdef UI_OUT
- /* Install the default UI */
- uiout = cli_out_new (gdb_stdout);
-#endif
-
-#ifdef UI_OUT
- /* All the interpreters should have had a look at things by now.
- Initialize the selected interpreter. */
- if (interpreter_p && !init_ui_hook)
- {
- fprintf_unfiltered (gdb_stderr, "Interpreter `%s' unrecognized.\n",
- interpreter_p);
- exit (1);
- }
-#endif
-
- if (init_ui_hook)
- init_ui_hook (argv0);
-}
-
/* Execute the line P as a command.
Pass FROM_TTY as second argument to the defining function. */
void
execute_command (char *p, int from_tty)
{
- register struct cmd_list_element *c;
- register enum language flang;
+ struct cmd_list_element *c;
+ enum language flang;
static int warned = 0;
char *line;
- /* FIXME: These should really be in an appropriate header file */
-extern void serial_log_command (const char *);
-
+
free_all_values ();
/* Force cleanup of any alloca areas if using C alloca instead of
/* If the target is running, we allow only a limited set of
commands. */
- if (event_loop_p && target_can_async_p () && target_executing)
- if (!strcmp (c->name, "help")
- && !strcmp (c->name, "pwd")
- && !strcmp (c->name, "show")
- && !strcmp (c->name, "stop"))
- error ("Cannot execute this command while the target is running.");
+ if (target_can_async_p () && target_executing)
+ if (strcmp (c->name, "help") != 0
+ && strcmp (c->name, "pwd") != 0
+ && strcmp (c->name, "show") != 0
+ && strcmp (c->name, "stop") != 0)
+ error (_("Cannot execute this command while the target is running."));
/* Pass null arg rather than an empty one. */
arg = *p ? p : 0;
- /* Clear off trailing whitespace, except for set and complete command. */
+ /* FIXME: cagney/2002-02-02: The c->type test is pretty dodgy
+ while the is_complete_command(cfunc) test is just plain
+ bogus. They should both be replaced by a test of the form
+ c->strip_trailing_white_space_p. */
+ /* NOTE: cagney/2002-02-02: The function.cfunc in the below
+ can't be replaced with func. This is because it is the
+ cfunc, and not the func, that has the value that the
+ is_complete_command hack is testing for. */
+ /* Clear off trailing whitespace, except for set and complete
+ command. */
if (arg
&& c->type != set_cmd
- && !is_complete_command (c->function.cfunc))
+ && !is_complete_command (c))
{
p = arg + strlen (arg) - 1;
while (p >= arg && (*p == ' ' || *p == '\t'))
}
/* If this command has been pre-hooked, run the hook first. */
- if ((c->hook_pre) && (!c->hook_in))
- {
- c->hook_in = 1; /* Prevent recursive hooking */
- execute_user_command (c->hook_pre, (char *) 0);
- c->hook_in = 0; /* Allow hook to work again once it is complete */
- }
+ execute_cmd_pre_hook (c);
if (c->flags & DEPRECATED_WARN_USER)
deprecated_cmd_warning (&line);
execute_user_command (c, arg);
else if (c->type == set_cmd || c->type == show_cmd)
do_setshow_command (arg, from_tty & caution, c);
- else if (c->function.cfunc == NO_FUNCTION)
- error ("That is not a command, just a help topic.");
- else if (call_command_hook)
- call_command_hook (c, arg, from_tty & caution);
+ else if (!cmd_func_p (c))
+ error (_("That is not a command, just a help topic."));
+ else if (deprecated_call_command_hook)
+ deprecated_call_command_hook (c, arg, from_tty & caution);
else
- (*c->function.cfunc) (arg, from_tty & caution);
+ cmd_func (c, arg, from_tty & caution);
/* If this command has been post-hooked, run the hook last. */
- if ((c->hook_post) && (!c->hook_in))
- {
- c->hook_in = 1; /* Prevent recursive hooking */
- execute_user_command (c->hook_post, (char *) 0);
- c->hook_in = 0; /* allow hook to work again once it is complete */
- }
+ execute_cmd_post_hook (c);
}
while (instream && !feof (instream))
{
-#if defined(TUI)
- extern int insert_mode;
-#endif
if (window_hook && instream == stdin)
(*window_hook) (instream, get_prompt ());
reinitialize_more_filter ();
old_chain = make_cleanup (null_cleanup, 0);
-#if defined(TUI)
- /* A bit of paranoia: I want to make sure the "insert_mode" global
- * is clear except when it is being used for command-line editing
- * (see tuiIO.c, utils.c); otherwise normal output will
- * get messed up in the TUI. So clear it before/after
- * the command-line-input call. - RT
- */
- insert_mode = 0;
-#endif
/* Get a command-line. This calls the readline package. */
command = command_line_input (instream == stdin ?
get_prompt () : (char *) NULL,
instream == stdin, "prompt");
-#if defined(TUI)
- insert_mode = 0;
-#endif
if (command == 0)
return;
if (display_space)
{
#ifdef HAVE_SBRK
- extern char **environ;
char *lim = (char *) sbrk (0);
-
- space_at_cmd_start = (long) (lim - (char *) &environ);
+ space_at_cmd_start = lim - lim_at_start;
#endif
}
{
long cmd_time = get_run_time () - time_at_cmd_start;
- printf_unfiltered ("Command execution time: %ld.%06ld\n",
+ printf_unfiltered (_("Command execution time: %ld.%06ld\n"),
cmd_time / 1000000, cmd_time % 1000000);
}
if (display_space)
{
#ifdef HAVE_SBRK
- extern char **environ;
char *lim = (char *) sbrk (0);
- long space_now = lim - (char *) &environ;
+ long space_now = lim - lim_at_start;
long space_diff = space_now - space_at_cmd_start;
- printf_unfiltered ("Space used: %ld (%c%ld for this command)\n",
+ printf_unfiltered (_("Space used: %ld (%c%ld for this command)\n"),
space_now,
(space_diff >= 0 ? '+' : '-'),
space_diff);
character position to be off, since the newline we read from
the user is not accounted for. */
fputs_unfiltered (prompt_arg, gdb_stdout);
-#ifdef MPW
- /* Move to a new line so the entered line doesn't have a prompt
- on the front of it. */
- fputs_unfiltered ("\n", gdb_stdout);
-#endif /* MPW */
gdb_flush (gdb_stdout);
}
}
if (c == '\n')
-#ifndef CRLF_SOURCE_FILES
- break;
-#else
{
if (input_index > 0 && result[input_index - 1] == '\r')
input_index--;
break;
}
-#endif
result[input_index++] = c;
while (input_index >= result_size)
substitution. These variables are given default values at the end
of this file. */
static int command_editing_p;
+
/* NOTE 1999-04-29: This variable will be static again, once we modify
gdb to use the event loop as the default command loop and we merge
event-top.c into this file, top.c */
+
/* static */ int history_expansion_p;
-static int write_history_p;
-static int history_size;
-static char *history_filename;
-/* Functions that are used as part of the fancy command line editing. */
+static int write_history_p;
+static void
+show_write_history_p (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Saving of the history record on exit is %s.\n"),
+ value);
+}
-/* This can be used for functions which don't want to complete on symbols
- but don't want to complete on anything else either. */
-/* ARGSUSED */
-char **
-noop_completer (char *text, char *prefix)
+static int history_size;
+static void
+show_history_size (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
{
- return NULL;
+ fprintf_filtered (file, _("The size of the command history is %s.\n"),
+ value);
}
-/* Line completion interface function for readline. */
+static char *history_filename;
+static void
+show_history_filename (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+The filename in which to record the command history is \"%s\".\n"),
+ value);
+}
-static char *
-readline_line_completion_function (char *text, int matches)
+/* This is like readline(), but it has some gdb-specific behavior.
+ gdb can use readline in both the synchronous and async modes during
+ a single gdb invocation. At the ordinary top-level prompt we might
+ be using the async readline. That means we can't use
+ rl_pre_input_hook, since it doesn't work properly in async mode.
+ However, for a secondary prompt (" >", such as occurs during a
+ `define'), gdb just calls readline() directly, running it in
+ synchronous mode. So for operate-and-get-next to work in this
+ situation, we have to switch the hooks around. That is what
+ gdb_readline_wrapper is for. */
+char *
+gdb_readline_wrapper (char *prompt)
{
- return line_completion_function (text, matches, rl_line_buffer, rl_point);
+ /* Set the hook that works in this case. */
+ if (after_char_processing_hook)
+ {
+ rl_pre_input_hook = (Function *) after_char_processing_hook;
+ after_char_processing_hook = NULL;
+ }
+
+ return readline (prompt);
}
+
\f
#ifdef STOP_SIGNAL
static void
{
#if STOP_SIGNAL == SIGTSTP
signal (SIGTSTP, SIG_DFL);
+#if HAVE_SIGPROCMASK
+ {
+ sigset_t zero;
+
+ sigemptyset (&zero);
+ sigprocmask (SIG_SETMASK, &zero, 0);
+ }
+#elif HAVE_SIGSETMASK
sigsetmask (0);
+#endif
kill (getpid (), SIGTSTP);
signal (SIGTSTP, stop_sig);
#else
#endif /* STOP_SIGNAL */
/* Initialize signal handlers. */
+static void
+float_handler (int signo)
+{
+ /* This message is based on ANSI C, section 4.7. Note that integer
+ divide by zero causes this, so "float" is a misnomer. */
+ signal (SIGFPE, float_handler);
+ error (_("Erroneous arithmetic operation."));
+}
+
static void
do_nothing (int signo)
{
signal (signo, do_nothing);
}
+/* The current saved history number from operate-and-get-next.
+ This is -1 if not valid. */
+static int operate_saved_history = -1;
+
+/* This is put on the appropriate hook and helps operate-and-get-next
+ do its work. */
static void
-init_signals (void)
+gdb_rl_operate_and_get_next_completion (void)
{
- signal (SIGINT, request_quit);
+ int delta = where_history () - operate_saved_history;
+ /* The `key' argument to rl_get_previous_history is ignored. */
+ rl_get_previous_history (delta, 0);
+ operate_saved_history = -1;
- /* If SIGTRAP was set to SIG_IGN, then the SIG_IGN will get passed
- to the inferior and breakpoints will be ignored. */
-#ifdef SIGTRAP
- signal (SIGTRAP, SIG_DFL);
-#endif
+ /* readline doesn't automatically update the display for us. */
+ rl_redisplay ();
- /* If we initialize SIGQUIT to SIG_IGN, then the SIG_IGN will get
- passed to the inferior, which we don't want. It would be
- possible to do a "signal (SIGQUIT, SIG_DFL)" after we fork, but
- on BSD4.3 systems using vfork, that can affect the
- GDB process as well as the inferior (the signal handling tables
- might be in memory, shared between the two). Since we establish
- a handler for SIGQUIT, when we call exec it will set the signal
- to SIG_DFL for us. */
- signal (SIGQUIT, do_nothing);
-#ifdef SIGHUP
- if (signal (SIGHUP, do_nothing) != SIG_IGN)
- signal (SIGHUP, disconnect);
-#endif
- signal (SIGFPE, float_handler);
+ after_char_processing_hook = NULL;
+ rl_pre_input_hook = NULL;
+}
-#if defined(SIGWINCH) && defined(SIGWINCH_HANDLER)
- signal (SIGWINCH, SIGWINCH_HANDLER);
-#endif
+/* This is a gdb-local readline command handler. It accepts the
+ current command line (like RET does) and, if this command was taken
+ from the history, arranges for the next command in the history to
+ appear on the command line when the prompt returns.
+ We ignore the arguments. */
+static int
+gdb_rl_operate_and_get_next (int count, int key)
+{
+ int where;
+
+ /* Use the async hook. */
+ after_char_processing_hook = gdb_rl_operate_and_get_next_completion;
+
+ /* Find the current line, and find the next line to use. */
+ where = where_history();
+
+ /* FIXME: kettenis/20020817: max_input_history is renamed into
+ history_max_entries in readline-4.2. When we do a new readline
+ import, we should probably change it here too, even though
+ readline maintains backwards compatibility for now by still
+ defining max_input_history. */
+ if ((history_is_stifled () && (history_length >= max_input_history)) ||
+ (where >= history_length - 1))
+ operate_saved_history = where;
+ else
+ operate_saved_history = where + 1;
+
+ return rl_newline (1, key);
}
\f
/* Read one line from the command input stream `instream'
{
static char *linebuffer = 0;
static unsigned linelength = 0;
- register char *p;
+ char *p;
char *p1;
char *rl;
char *local_prompt = prompt_arg;
immediate_quit++;
#ifdef STOP_SIGNAL
if (job_control)
- {
- if (event_loop_p)
- signal (STOP_SIGNAL, handle_stop_sig);
- else
- signal (STOP_SIGNAL, stop_sig);
- }
+ signal (STOP_SIGNAL, handle_stop_sig);
#endif
while (1)
gdb_flush (gdb_stderr);
if (source_file_name != NULL)
- {
- ++source_line_number;
- sprintf (source_error,
- "%s%s:%d: Error in sourced command file:\n",
- source_pre_error,
- source_file_name,
- source_line_number);
- error_pre_print = source_error;
- }
+ ++source_line_number;
if (annotation_level > 1 && instream == stdin)
{
- printf_unfiltered ("\n\032\032pre-");
- printf_unfiltered (annotation_suffix);
- printf_unfiltered ("\n");
+ puts_unfiltered ("\n\032\032pre-");
+ puts_unfiltered (annotation_suffix);
+ puts_unfiltered ("\n");
}
/* Don't use fancy stuff if not talking to stdin. */
- if (readline_hook && instream == NULL)
+ if (deprecated_readline_hook && input_from_terminal_p ())
{
- rl = (*readline_hook) (local_prompt);
+ rl = (*deprecated_readline_hook) (local_prompt);
}
- else if (command_editing_p && instream == stdin && ISATTY (instream))
+ else if (command_editing_p && input_from_terminal_p ())
{
- rl = readline (local_prompt);
+ rl = gdb_readline_wrapper (local_prompt);
}
else
{
if (annotation_level > 1 && instream == stdin)
{
- printf_unfiltered ("\n\032\032post-");
- printf_unfiltered (annotation_suffix);
- printf_unfiltered ("\n");
+ puts_unfiltered ("\n\032\032post-");
+ puts_unfiltered (annotation_suffix);
+ puts_unfiltered ("\n");
}
if (!rl || rl == (char *) EOF)
#define SERVER_COMMAND_LENGTH 7
server_command =
(p - linebuffer > SERVER_COMMAND_LENGTH)
- && STREQN (linebuffer, "server ", SERVER_COMMAND_LENGTH);
+ && strncmp (linebuffer, "server ", SERVER_COMMAND_LENGTH) == 0;
if (server_command)
{
/* Note that we don't set `line'. Between this and the check in
program to parse, and is just canonical program name and version
number, which starts after last space. */
-#ifdef MI_OUT
- /* Print it console style until a format is defined */
- fprintf_filtered (stream, "GNU gdb %s (MI_OUT)\n", version);
-#else
fprintf_filtered (stream, "GNU gdb %s\n", version);
-#endif
/* Second line is a copyright notice. */
- fprintf_filtered (stream, "Copyright 2001 Free Software Foundation, Inc.\n");
+ fprintf_filtered (stream, "Copyright (C) 2006 Free Software Foundation, Inc.\n");
/* Following the copyright is a brief statement that the program is
free software, that users are free to copy and change it on
/* After the required info we print the configuration information. */
fprintf_filtered (stream, "This GDB was configured as \"");
- if (!STREQ (host_name, target_name))
+ if (strcmp (host_name, target_name) != 0)
{
fprintf_filtered (stream, "--host=%s --target=%s", host_name, target_name);
}
\f
/* get_prompt: access method for the GDB prompt string. */
-#define MAX_PROMPT_SIZE 256
-
-/*
- * int get_prompt_1 (char * buf);
- *
- * Work-horse for get_prompt (called via catch_errors).
- * Argument is buffer to hold the formatted prompt.
- *
- * Returns: 1 for success (use formatted prompt)
- * 0 for failure (use gdb_prompt_string).
- */
-
-static int gdb_prompt_escape;
-
-static int
-get_prompt_1 (void *data)
-{
- char *formatted_prompt = data;
- char *local_prompt;
-
- if (event_loop_p)
- local_prompt = PROMPT (0);
- else
- local_prompt = gdb_prompt_string;
-
-
- if (gdb_prompt_escape == 0)
- {
- return 0; /* do no formatting */
- }
- else
- /* formatted prompt */
- {
- char fmt[40], *promptp, *outp, *tmp;
- value_ptr arg_val;
- DOUBLEST doubleval;
- LONGEST longval;
- CORE_ADDR addrval;
-
- int i, len;
- struct type *arg_type, *elt_type;
-
- promptp = local_prompt;
- outp = formatted_prompt;
-
- while (*promptp != '\0')
- {
- int available = MAX_PROMPT_SIZE - (outp - formatted_prompt) - 1;
-
- if (*promptp != gdb_prompt_escape)
- {
- if (available >= 1) /* overflow protect */
- *outp++ = *promptp++;
- }
- else
- {
- /* GDB prompt string contains escape char. Parse for arg.
- Two consecutive escape chars followed by arg followed by
- a comma means to insert the arg using a default format.
- Otherwise a printf format string may be included between
- the two escape chars. eg:
- %%foo, insert foo using default format
- %2.2f%foo, insert foo using "%2.2f" format
- A mismatch between the format string and the data type
- of "foo" is an error (which we don't know how to protect
- against). */
-
- fmt[0] = '\0'; /* assume null format string */
- if (promptp[1] == gdb_prompt_escape) /* double esc char */
- {
- promptp += 2; /* skip past two escape chars. */
- }
- else
- {
- /* extract format string from between two esc chars */
- i = 0;
- do
- {
- fmt[i++] = *promptp++; /* copy format string */
- }
- while (i < sizeof (fmt) - 1 &&
- *promptp != gdb_prompt_escape &&
- *promptp != '\0');
-
- if (*promptp != gdb_prompt_escape)
- error ("Syntax error at prompt position %d",
- promptp - local_prompt);
- else
- {
- promptp++; /* skip second escape char */
- fmt[i++] = '\0'; /* terminate the format string */
- }
- }
-
- arg_val = parse_to_comma_and_eval (&promptp);
- if (*promptp == ',')
- promptp++; /* skip past the comma */
- arg_type = check_typedef (VALUE_TYPE (arg_val));
- switch (TYPE_CODE (arg_type))
- {
- case TYPE_CODE_ARRAY:
- elt_type = check_typedef (TYPE_TARGET_TYPE (arg_type));
- if (TYPE_LENGTH (arg_type) > 0 &&
- TYPE_LENGTH (elt_type) == 1 &&
- TYPE_CODE (elt_type) == TYPE_CODE_INT)
- {
- int len = TYPE_LENGTH (arg_type);
-
- if (VALUE_LAZY (arg_val))
- value_fetch_lazy (arg_val);
- tmp = VALUE_CONTENTS (arg_val);
-
- if (len > available)
- len = available; /* overflow protect */
-
- /* FIXME: how to protect GDB from crashing
- from bad user-supplied format string? */
- if (fmt[0] != 0)
- sprintf (outp, fmt, tmp);
- else
- strncpy (outp, tmp, len);
- outp[len] = '\0';
- }
- break;
- case TYPE_CODE_PTR:
- elt_type = check_typedef (TYPE_TARGET_TYPE (arg_type));
- addrval = value_as_pointer (arg_val);
-
- if (TYPE_LENGTH (elt_type) == 1 &&
- TYPE_CODE (elt_type) == TYPE_CODE_INT &&
- addrval != 0)
- {
- /* display it as a string */
- char *default_fmt = "%s";
- char *tmp;
- int err = 0;
-
- /* Limiting the number of bytes that the following call
- will read protects us from sprintf overflow later. */
- i = target_read_string (addrval, /* src */
- &tmp, /* dest */
- available, /* len */
- &err);
- if (err) /* read failed */
- error ("%s on target_read", safe_strerror (err));
-
- tmp[i] = '\0'; /* force-terminate string */
- /* FIXME: how to protect GDB from crashing
- from bad user-supplied format string? */
- sprintf (outp, fmt[0] == 0 ? default_fmt : fmt,
- tmp);
- xfree (tmp);
- }
- else
- {
- /* display it as a pointer */
- char *default_fmt = "0x%x";
-
- /* FIXME: how to protect GDB from crashing
- from bad user-supplied format string? */
- if (available >= 16 /*? */ ) /* overflow protect */
- sprintf (outp, fmt[0] == 0 ? default_fmt : fmt,
- (long) addrval);
- }
- break;
- case TYPE_CODE_FLT:
- {
- char *default_fmt = "%g";
-
- doubleval = value_as_double (arg_val);
- /* FIXME: how to protect GDB from crashing
- from bad user-supplied format string? */
- if (available >= 16 /*? */ ) /* overflow protect */
- sprintf (outp, fmt[0] == 0 ? default_fmt : fmt,
- (double) doubleval);
- break;
- }
- case TYPE_CODE_INT:
- {
- char *default_fmt = "%d";
-
- longval = value_as_long (arg_val);
- /* FIXME: how to protect GDB from crashing
- from bad user-supplied format string? */
- if (available >= 16 /*? */ ) /* overflow protect */
- sprintf (outp, fmt[0] == 0 ? default_fmt : fmt,
- (long) longval);
- break;
- }
- case TYPE_CODE_BOOL:
- {
- /* no default format for bool */
- longval = value_as_long (arg_val);
- if (available >= 8 /*? */ ) /* overflow protect */
- {
- if (longval)
- strcpy (outp, "<true>");
- else
- strcpy (outp, "<false>");
- }
- break;
- }
- case TYPE_CODE_ENUM:
- {
- /* no default format for enum */
- longval = value_as_long (arg_val);
- len = TYPE_NFIELDS (arg_type);
- /* find enum name if possible */
- for (i = 0; i < len; i++)
- if (TYPE_FIELD_BITPOS (arg_type, i) == longval)
- break; /* match -- end loop */
-
- if (i < len) /* enum name found */
- {
- char *name = TYPE_FIELD_NAME (arg_type, i);
-
- strncpy (outp, name, available);
- /* in casel available < strlen (name), */
- outp[available] = '\0';
- }
- else
- {
- if (available >= 16 /*? */ ) /* overflow protect */
- sprintf (outp, "%ld", (long) longval);
- }
- break;
- }
- case TYPE_CODE_VOID:
- *outp = '\0';
- break; /* void type -- no output */
- default:
- error ("bad data type at prompt position %d",
- promptp - local_prompt);
- break;
- }
- outp += strlen (outp);
- }
- }
- *outp++ = '\0'; /* terminate prompt string */
- return 1;
- }
-}
-
char *
get_prompt (void)
{
- static char buf[MAX_PROMPT_SIZE];
-
- if (catch_errors (get_prompt_1, buf, "bad formatted prompt: ",
- RETURN_MASK_ALL))
- {
- return &buf[0]; /* successful formatted prompt */
- }
- else
- {
- /* Prompt could not be formatted. */
- if (event_loop_p)
- return PROMPT (0);
- else
- return gdb_prompt_string;
- }
+ return PROMPT (0);
}
void
if (prompt != NULL)
xfree (prompt);
*/
- if (event_loop_p)
- PROMPT (0) = savestring (s, strlen (s));
- else
- gdb_prompt_string = savestring (s, strlen (s));
+ PROMPT (0) = savestring (s, strlen (s));
}
\f
int
quit_confirm (void)
{
- if (inferior_pid != 0 && target_has_execution)
+ if (! ptid_equal (inferior_ptid, null_ptid) && target_has_execution)
{
char *s;
/* This is something of a hack. But there's no reliable way to
see if a GUI is running. The `use_windows' variable doesn't
cut it. */
- if (init_ui_hook)
+ if (deprecated_init_ui_hook)
s = "A debugging session is active.\nDo you still want to close the debugger?";
else if (attach_flag)
s = "The program is running. Quit anyway (and detach it)? ";
else
s = "The program is running. Exit anyway? ";
- if (!query (s))
+ if (!query ("%s", s))
return 0;
}
return 1;
}
-/* Quit without asking for confirmation. */
+/* Helper routine for quit_force that requires error handling. */
-void
-quit_force (char *args, int from_tty)
+struct qt_args
{
- int exit_code = 0;
-
- /* An optional expression may be used to cause gdb to terminate with the
- value of that expression. */
- if (args)
- {
- value_ptr val = parse_and_eval (args);
+ char *args;
+ int from_tty;
+};
- exit_code = (int) value_as_long (val);
- }
+static int
+quit_target (void *arg)
+{
+ struct qt_args *qt = (struct qt_args *)arg;
- if (inferior_pid != 0 && target_has_execution)
+ if (! ptid_equal (inferior_ptid, null_ptid) && target_has_execution)
{
if (attach_flag)
- target_detach (args, from_tty);
+ target_detach (qt->args, qt->from_tty);
else
- target_kill ();
+ target_kill ();
}
/* UDI wants this, to kill the TIP. */
- target_close (1);
+ target_close (¤t_target, 1);
/* Save the history information if it is appropriate to do so. */
if (write_history_p && history_filename)
do_final_cleanups (ALL_CLEANUPS); /* Do any final cleanups before exiting */
-#if defined(TUI)
- /* tuiDo((TuiOpaqueFuncPtr)tuiCleanUp); */
- /* The above does not need to be inside a tuiDo(), since
- * it is not manipulating the curses screen, but rather,
- * it is tearing it down.
- */
- if (tui_version)
- tuiCleanUp ();
-#endif
+ return 0;
+}
+
+/* Quit without asking for confirmation. */
+
+void
+quit_force (char *args, int from_tty)
+{
+ int exit_code = 0;
+ struct qt_args qt;
+
+ /* An optional expression may be used to cause gdb to terminate with the
+ value of that expression. */
+ if (args)
+ {
+ struct value *val = parse_and_eval (args);
+
+ exit_code = (int) value_as_long (val);
+ }
+ else if (return_child_result)
+ exit_code = return_child_result_value;
+
+ qt.args = args;
+ qt.from_tty = from_tty;
+
+ /* We want to handle any quit errors and exit regardless. */
+ catch_errors (quit_target, &qt,
+ "Quitting: ", RETURN_MASK_ALL);
exit (exit_code);
}
-/* Returns whether GDB is running on a terminal and whether the user
- desires that questions be asked of them on that terminal. */
+/* Returns whether GDB is running on a terminal and input is
+ currently coming from that terminal. */
int
input_from_terminal_p (void)
{
- return gdb_has_a_terminal () && (instream == stdin) & caution;
+ if (gdb_has_a_terminal () && instream == stdin)
+ return 1;
+
+ /* If INSTREAM is unset, and we are not in a user command, we
+ must be in Insight. That's like having a terminal, for our
+ purposes. */
+ if (instream == NULL && !in_user_command)
+ return 1;
+
+ return 0;
}
\f
-/* ARGSUSED */
static void
dont_repeat_command (char *ignored, int from_tty)
{
than the number of the last command). Relative to history_base. */
int hist_len;
-extern HIST_ENTRY *history_get (int);
-
/* Print out some of the commands from the command history. */
/* First determine the length of the history list. */
hist_len = history_size;
}
/* Called by do_setshow_command. */
-/* ARGSUSED */
static void
set_history_size_command (char *args, int from_tty, struct cmd_list_element *c)
{
else
{
history_size = INT_MAX;
- error ("History size must be non-negative");
+ error (_("History size must be non-negative"));
}
}
-/* ARGSUSED */
void
set_history (char *args, int from_tty)
{
- printf_unfiltered ("\"set history\" must be followed by the name of a history subcommand.\n");
+ printf_unfiltered (_("\"set history\" must be followed by the name of a history subcommand.\n"));
help_list (sethistlist, "set history ", -1, gdb_stdout);
}
-/* ARGSUSED */
void
show_history (char *args, int from_tty)
{
int info_verbose = 0; /* Default verbose msgs off */
/* Called by do_setshow_command. An elaborate joke. */
-/* ARGSUSED */
void
set_verbose (char *args, int from_tty, struct cmd_list_element *c)
{
}
}
-static void
-float_handler (int signo)
-{
- /* This message is based on ANSI C, section 4.7. Note that integer
- divide by zero causes this, so "float" is a misnomer. */
- signal (SIGFPE, float_handler);
- error ("Erroneous arithmetic operation.");
-}
-
/* Init the history buffer. Note that we are called after the init file(s)
* have been read so that the user can change the history file via his
* .gdbinit file (for instance). The GDBHISTFILE environment variable
that was read. */
#ifdef __MSDOS__
/* No leading dots in file names are allowed on MSDOS. */
- history_filename = concat (current_directory, "/_gdb_history", NULL);
+ history_filename = concat (current_directory, "/_gdb_history",
+ (char *)NULL);
#else
- history_filename = concat (current_directory, "/.gdb_history", NULL);
+ history_filename = concat (current_directory, "/.gdb_history",
+ (char *)NULL);
#endif
}
read_history (history_filename);
}
+static void
+show_new_async_prompt (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Gdb's prompt is \"%s\".\n"), value);
+}
+
+static void
+show_async_command_editing_p (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Editing of command lines as they are typed is %s.\n"),
+ value);
+}
+
+static void
+show_annotation_level (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Annotation_level is %s.\n"), value);
+}
+
+static void
+show_exec_done_display_p (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Notification of completion for asynchronous execution commands is %s.\n"),
+ value);
+}
static void
init_main (void)
{
struct cmd_list_element *c;
- /* If we are running the asynchronous version,
- we initialize the prompts differently. */
- if (!event_loop_p)
- {
- gdb_prompt_string = savestring (DEFAULT_PROMPT, strlen (DEFAULT_PROMPT));
- }
- else
- {
- /* initialize the prompt stack to a simple "(gdb) " prompt or to
- whatever the DEFAULT_PROMPT is. */
- the_prompts.top = 0;
- PREFIX (0) = "";
- PROMPT (0) = savestring (DEFAULT_PROMPT, strlen (DEFAULT_PROMPT));
- SUFFIX (0) = "";
- /* Set things up for annotation_level > 1, if the user ever decides
- to use it. */
- async_annotation_suffix = "prompt";
- /* Set the variable associated with the setshow prompt command. */
- new_async_prompt = savestring (PROMPT (0), strlen (PROMPT (0)));
- }
- gdb_prompt_escape = 0; /* default to none. */
+ /* initialize the prompt stack to a simple "(gdb) " prompt or to
+ whatever the DEFAULT_PROMPT is. */
+ the_prompts.top = 0;
+ PREFIX (0) = "";
+ PROMPT (0) = savestring (DEFAULT_PROMPT, strlen (DEFAULT_PROMPT));
+ SUFFIX (0) = "";
+ /* Set things up for annotation_level > 1, if the user ever decides
+ to use it. */
+ async_annotation_suffix = "prompt";
+ /* Set the variable associated with the setshow prompt command. */
+ new_async_prompt = savestring (PROMPT (0), strlen (PROMPT (0)));
+
+ /* If gdb was started with --annotate=2, this is equivalent to the
+ user entering the command 'set annotate 2' at the gdb prompt, so
+ we need to do extra processing. */
+ if (annotation_level > 1)
+ set_async_annotation_level (NULL, 0, NULL);
/* Set the important stuff up for command editing. */
command_editing_p = 1;
write_history_p = 0;
/* Setup important stuff for command line editing. */
- rl_completion_entry_function = (int (*)()) readline_line_completion_function;
- rl_completer_word_break_characters =
- get_gdb_completer_word_break_characters ();
+ rl_completion_entry_function = readline_line_completion_function;
+ rl_completer_word_break_characters = default_word_break_characters ();
rl_completer_quote_characters = get_gdb_completer_quote_characters ();
rl_readline_name = "gdb";
-
- /* The set prompt command is different depending whether or not the
- async version is run. NOTE: this difference is going to
- disappear as we make the event loop be the default engine of
- gdb. */
- if (!event_loop_p)
- {
- add_show_from_set
- (add_set_cmd ("prompt", class_support, var_string,
- (char *) &gdb_prompt_string, "Set gdb's prompt",
- &setlist),
- &showlist);
- }
- else
- {
- c = add_set_cmd ("prompt", class_support, var_string,
- (char *) &new_async_prompt, "Set gdb's prompt",
- &setlist);
- add_show_from_set (c, &showlist);
- c->function.sfunc = set_async_prompt;
- }
-
- add_show_from_set
- (add_set_cmd ("prompt-escape-char", class_support, var_zinteger,
- (char *) &gdb_prompt_escape,
- "Set escape character for formatting of gdb's prompt",
- &setlist),
- &showlist);
-
- add_com ("dont-repeat", class_support, dont_repeat_command, "Don't repeat this command.\n\
+ rl_terminal_name = getenv ("TERM");
+
+ /* The name for this defun comes from Bash, where it originated.
+ 15 is Control-o, the same binding this function has in Bash. */
+ rl_add_defun ("operate-and-get-next", gdb_rl_operate_and_get_next, 15);
+
+ add_setshow_string_cmd ("prompt", class_support,
+ &new_async_prompt, _("\
+Set gdb's prompt"), _("\
+Show gdb's prompt"), NULL,
+ set_async_prompt,
+ show_new_async_prompt,
+ &setlist, &showlist);
+
+ add_com ("dont-repeat", class_support, dont_repeat_command, _("\
+Don't repeat this command.\n\
Primarily used inside of user-defined commands that should not be repeated when\n\
-hitting return.");
+hitting return."));
- /* The set editing command is different depending whether or not the
- async version is run. NOTE: this difference is going to disappear
- as we make the event loop be the default engine of gdb. */
- if (!event_loop_p)
- {
- add_show_from_set
- (add_set_cmd ("editing", class_support, var_boolean, (char *) &command_editing_p,
- "Set editing of command lines as they are typed.\n\
+ add_setshow_boolean_cmd ("editing", class_support,
+ &async_command_editing_p, _("\
+Set editing of command lines as they are typed."), _("\
+Show editing of command lines as they are typed."), _("\
Use \"on\" to enable the editing, and \"off\" to disable it.\n\
Without an argument, command line editing is enabled. To edit, use\n\
-EMACS-like or VI-like commands like control-P or ESC.", &setlist),
- &showlist);
- }
- else
- {
- c = add_set_cmd ("editing", class_support, var_boolean, (char *) &async_command_editing_p,
- "Set editing of command lines as they are typed.\n\
-Use \"on\" to enable the editing, and \"off\" to disable it.\n\
-Without an argument, command line editing is enabled. To edit, use\n\
-EMACS-like or VI-like commands like control-P or ESC.", &setlist);
-
- add_show_from_set (c, &showlist);
- c->function.sfunc = set_async_editing_command;
- }
-
- add_show_from_set
- (add_set_cmd ("save", no_class, var_boolean, (char *) &write_history_p,
- "Set saving of the history record on exit.\n\
+EMACS-like or VI-like commands like control-P or ESC."),
+ set_async_editing_command,
+ show_async_command_editing_p,
+ &setlist, &showlist);
+
+ add_setshow_boolean_cmd ("save", no_class, &write_history_p, _("\
+Set saving of the history record on exit."), _("\
+Show saving of the history record on exit."), _("\
Use \"on\" to enable the saving, and \"off\" to disable it.\n\
-Without an argument, saving is enabled.", &sethistlist),
- &showhistlist);
-
- c = add_set_cmd ("size", no_class, var_integer, (char *) &history_size,
- "Set the size of the command history, \n\
-ie. the number of previous commands to keep a record of.", &sethistlist);
- add_show_from_set (c, &showhistlist);
- c->function.sfunc = set_history_size_command;
-
- add_show_from_set
- (add_set_cmd ("filename", no_class, var_filename, (char *) &history_filename,
- "Set the filename in which to record the command history\n\
- (the list of previous commands of which a record is kept).", &sethistlist),
- &showhistlist);
-
- add_show_from_set
- (add_set_cmd ("confirm", class_support, var_boolean,
- (char *) &caution,
- "Set whether to confirm potentially dangerous operations.",
- &setlist),
- &showlist);
-
- /* The set annotate command is different depending whether or not
- the async version is run. NOTE: this difference is going to
- disappear as we make the event loop be the default engine of
- gdb. */
- if (!event_loop_p)
- {
- c = add_set_cmd ("annotate", class_obscure, var_zinteger,
- (char *) &annotation_level, "Set annotation_level.\n\
+Without an argument, saving is enabled."),
+ NULL,
+ show_write_history_p,
+ &sethistlist, &showhistlist);
+
+ add_setshow_integer_cmd ("size", no_class, &history_size, _("\
+Set the size of the command history,"), _("\
+Show the size of the command history,"), _("\
+ie. the number of previous commands to keep a record of."),
+ set_history_size_command,
+ show_history_size,
+ &sethistlist, &showhistlist);
+
+ add_setshow_filename_cmd ("filename", no_class, &history_filename, _("\
+Set the filename in which to record the command history"), _("\
+Show the filename in which to record the command history"), _("\
+(the list of previous commands of which a record is kept)."),
+ NULL,
+ show_history_filename,
+ &sethistlist, &showhistlist);
+
+ add_setshow_boolean_cmd ("confirm", class_support, &caution, _("\
+Set whether to confirm potentially dangerous operations."), _("\
+Show whether to confirm potentially dangerous operations."), NULL,
+ NULL,
+ show_caution,
+ &setlist, &showlist);
+
+ add_setshow_zinteger_cmd ("annotate", class_obscure, &annotation_level, _("\
+Set annotation_level."), _("\
+Show annotation_level."), _("\
0 == normal; 1 == fullname (for use when running under emacs)\n\
-2 == output annotated suitably for use by programs that control GDB.",
- &setlist);
- c = add_show_from_set (c, &showlist);
- }
- else
- {
- c = add_set_cmd ("annotate", class_obscure, var_zinteger,
- (char *) &annotation_level, "Set annotation_level.\n\
-0 == normal; 1 == fullname (for use when running under emacs)\n\
-2 == output annotated suitably for use by programs that control GDB.",
- &setlist);
- add_show_from_set (c, &showlist);
- c->function.sfunc = set_async_annotation_level;
- }
- if (event_loop_p)
- {
- add_show_from_set
- (add_set_cmd ("exec-done-display", class_support, var_boolean, (char *) &exec_done_display_p,
- "Set notification of completion for asynchronous execution commands.\n\
-Use \"on\" to enable the notification, and \"off\" to disable it.", &setlist),
- &showlist);
- }
+2 == output annotated suitably for use by programs that control GDB."),
+ set_async_annotation_level,
+ show_annotation_level,
+ &setlist, &showlist);
+
+ add_setshow_boolean_cmd ("exec-done-display", class_support,
+ &exec_done_display_p, _("\
+Set notification of completion for asynchronous execution commands."), _("\
+Show notification of completion for asynchronous execution commands."), _("\
+Use \"on\" to enable the notification, and \"off\" to disable it."),
+ NULL,
+ show_exec_done_display_p,
+ &setlist, &showlist);
+}
+
+void
+gdb_init (char *argv0)
+{
+ if (pre_init_ui_hook)
+ pre_init_ui_hook ();
+
+ /* Run the init function of each source file */
+
+ getcwd (gdb_dirbuf, sizeof (gdb_dirbuf));
+ current_directory = gdb_dirbuf;
+
+#ifdef __MSDOS__
+ /* Make sure we return to the original directory upon exit, come
+ what may, since the OS doesn't do that for us. */
+ make_final_cleanup (do_chdir_cleanup, xstrdup (current_directory));
+#endif
+
+ init_cmd_lists (); /* This needs to be done first */
+ initialize_targets (); /* Setup target_terminal macros for utils.c */
+ initialize_utils (); /* Make errors and warnings possible */
+ initialize_all_files ();
+ initialize_current_architecture ();
+ init_cli_cmds();
+ init_main (); /* But that omits this file! Do it now */
+
+ initialize_stdin_serial ();
+
+ async_init_signals ();
+
+ /* We need a default language for parsing expressions, so simple things like
+ "set width 0" won't fail if no language is explicitly set in a config file
+ or implicitly set by reading an executable during startup. */
+ set_language (language_c);
+ expected_language = current_language; /* don't warn about the change. */
+
+ /* Allow another UI to initialize. If the UI fails to initialize,
+ and it wants GDB to revert to the CLI, it should clear
+ deprecated_init_ui_hook. */
+ if (deprecated_init_ui_hook)
+ deprecated_init_ui_hook (argv0);
}