Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
- 2008, 2009 Free Software Foundation, Inc.
+ 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
This file is part of GDB.
#include "main.h"
#include "event-loop.h"
#include "gdbthread.h"
+#include "python/python.h"
+#include "interps.h"
-/* readline include files */
+/* readline include files. */
#include "readline/readline.h"
#include "readline/history.h"
#include "ui-out.h"
#include "cli-out.h"
-/* Default command line prompt. This is overriden in some configs. */
+#define PROMPT(X) the_prompts.prompt_stack[the_prompts.top + X].prompt
+#define PREFIX(X) the_prompts.prompt_stack[the_prompts.top + X].prefix
+#define SUFFIX(X) the_prompts.prompt_stack[the_prompts.top + X].suffix
+
+/* Default command line prompt. This is overriden in some configs. */
#ifndef DEFAULT_PROMPT
#define DEFAULT_PROMPT "(gdb) "
/* Flag for whether we want all the "from_tty" gubbish printed. */
-int caution = 1; /* Default is yes, sigh. */
+int caution = 1; /* Default is yes, sigh. */
static void
show_caution (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-Whether to confirm potentially dangerous operations is %s.\n"),
+ fprintf_filtered (file, _("Whether to confirm potentially "
+ "dangerous operations is %s.\n"),
value);
}
-/* stdio stream that command input is being read from. Set to stdin normally.
- Set by source_command to the file we are sourcing. Set to NULL if we are
- executing a user-defined command or interacting via a GUI. */
+/* stdio stream that command input is being read from. Set to stdin
+ normally. Set by source_command to the file we are sourcing. Set
+ to NULL if we are executing a user-defined command or interacting
+ via a GUI. */
FILE *instream;
/* Buffer used for reading command lines, and the size
allocated for it so far. */
-char *line;
-int linesize = 100;
+char *saved_command_line;
+int saved_command_line_size = 100;
/* Nonzero if the current command is modified by "server ". This
affects things like recording into the command history, commands
/* Baud rate specified for talking to serial target systems. Default
is left as -1, so targets can choose their own defaults. */
-/* FIXME: This means that "show remotebaud" and gr_files_info can print -1
- or (unsigned int)-1. This is a Bad User Interface. */
+/* FIXME: This means that "show remotebaud" and gr_files_info can
+ print -1 or (unsigned int)-1. This is a Bad User Interface. */
int baud_rate = -1;
-/* Timeout limit for response from target. */
+/* Timeout limit for response from target. */
/* The default value has been changed many times over the years. It
was originally 5 seconds. But that was thought to be a long time
a single variable for all protocol timeouts.
As remote.c is used much more than remote-e7000.c, it was changed
- back to 2 seconds in 1999. */
+ back to 2 seconds in 1999. */
int remote_timeout = 2;
char *lim_at_start;
#endif
-/* Signal to catch ^Z typed while reading a command: SIGTSTP or SIGCONT. */
-
-#ifndef STOP_SIGNAL
-#ifdef SIGTSTP
-#define STOP_SIGNAL SIGTSTP
-static void stop_sig (int);
-#endif
-#endif
-
/* Hooks for alternate command interfaces. */
-/* Called after most modules have been initialized, but before taking users
- command file.
+/* Called after most modules have been initialized, but before taking
+ users command file.
- If the UI fails to initialize and it wants GDB to continue
- using the default UI, then it should clear this hook before returning. */
+ If the UI fails to initialize and it wants GDB to continue using
+ the default UI, then it should clear this hook before returning. */
void (*deprecated_init_ui_hook) (char *argv0);
-/* This hook is called from within gdb's many mini-event loops which could
- steal control from a real user interface's event loop. It returns
- non-zero if the user is requesting a detach, zero otherwise. */
+/* This hook is called from within gdb's many mini-event loops which
+ could steal control from a real user interface's event loop. It
+ returns non-zero if the user is requesting a detach, zero
+ otherwise. */
int (*deprecated_ui_loop_hook) (int);
/* Called from print_frame_info to list the line we stopped in. */
-void (*deprecated_print_frame_info_listing_hook) (struct symtab * s, int line,
- int stopline, int noerror);
+void (*deprecated_print_frame_info_listing_hook) (struct symtab * s,
+ int line,
+ int stopline,
+ int noerror);
/* Replaces most of query. */
int (*deprecated_query_hook) (const char *, va_list);
void (*deprecated_readline_end_hook) (void);
/* Called as appropriate to notify the interface that we have attached
- to or detached from an already running process. */
+ to or detached from an already running process. */
void (*deprecated_attach_hook) (void);
void (*deprecated_detach_hook) (void);
-/* Called during long calculations to allow GUI to repair window damage, and to
- check for stop buttons, etc... */
+/* Called during long calculations to allow GUI to repair window
+ damage, and to check for stop buttons, etc... */
void (*deprecated_interactive_hook) (void);
-/* Tell the GUI someone changed the register REGNO. -1 means
+/* Tell the GUI someone changed the register REGNO. -1 means
that the caller does not know which register changed or
- that several registers have changed (see value_assign). */
+ that several registers have changed (see value_assign). */
void (*deprecated_register_changed_hook) (int regno);
-/* Tell the GUI someone changed LEN bytes of memory at ADDR */
-void (*deprecated_memory_changed_hook) (CORE_ADDR addr, int len);
-
-/* Called when going to wait for the target. Usually allows the GUI to run
- while waiting for target events. */
+/* Called when going to wait for the target. Usually allows the GUI
+ to run while waiting for target events. */
ptid_t (*deprecated_target_wait_hook) (ptid_t ptid,
struct target_waitstatus *status,
int options);
-/* Used by UI as a wrapper around command execution. May do various things
- like enabling/disabling buttons, etc... */
+/* Used by UI as a wrapper around command execution. May do various
+ things like enabling/disabling buttons, etc... */
-void (*deprecated_call_command_hook) (struct cmd_list_element * c, char *cmd,
- int from_tty);
+void (*deprecated_call_command_hook) (struct cmd_list_element * c,
+ char *cmd, int from_tty);
/* Called after a `set' command has finished. Is only run if the
`set' command succeeded. */
#ifdef SIGHUP
/* NOTE 1999-04-29: This function will be static again, once we modify
gdb to use the event loop as the default command loop and we merge
- event-top.c into this file, top.c */
-/* static */ int
-quit_cover (void *s)
+ event-top.c into this file, top.c. */
+/* static */ void
+quit_cover (void)
{
caution = 0; /* Throw caution to the wind -- we're exiting.
- This prevents asking the user dumb questions. */
+ This prevents asking the user dumb
+ questions. */
quit_command ((char *) 0, 0);
- return 0;
}
#endif /* defined SIGHUP */
\f
-/* Line number we are currently in in a file which is being sourced. */
+/* Line number we are currently in, in a file which is being sourced. */
/* NOTE 1999-04-29: This variable will be static again, once we modify
gdb to use the event loop as the default command loop and we merge
- event-top.c into this file, top.c */
+ event-top.c into this file, top.c. */
/* static */ int source_line_number;
/* Name of the file we are sourcing. */
/* NOTE 1999-04-29: This variable will be static again, once we modify
gdb to use the event loop as the default command loop and we merge
- event-top.c into this file, top.c */
-/* static */ char *source_file_name;
+ event-top.c into this file, top.c. */
+/* static */ const char *source_file_name;
/* Clean up on error during a "source" command (or execution of a
user-defined command). */
}
#endif
-void
+struct cleanup *
prepare_execute_command (void)
{
- free_all_values ();
+ struct value *mark;
+ struct cleanup *cleanup;
- /* With multiple threads running while the one we're examining is stopped,
- the dcache can get stale without us being able to detect it.
- For the duration of the command, though, use the dcache to help
- things like backtrace. */
+ mark = value_mark ();
+ cleanup = make_cleanup_value_free_to_mark (mark);
+
+ /* With multiple threads running while the one we're examining is
+ stopped, the dcache can get stale without us being able to detect
+ it. For the duration of the command, though, use the dcache to
+ help things like backtrace. */
if (non_stop)
target_dcache_invalidate ();
+
+ return cleanup;
}
/* Execute the line P as a command, in the current user context.
void
execute_command (char *p, int from_tty)
{
+ struct cleanup *cleanup_if_error, *cleanup;
struct cmd_list_element *c;
enum language flang;
static int warned = 0;
char *line;
- long time_at_cmd_start = 0;
-#ifdef HAVE_SBRK
- long space_at_cmd_start = 0;
-#endif
- extern int display_time;
- extern int display_space;
- if (target_can_async_p ())
- {
- time_at_cmd_start = get_run_time ();
-
- if (display_space)
- {
-#ifdef HAVE_SBRK
- char *lim = (char *) sbrk (0);
- space_at_cmd_start = lim - lim_at_start;
-#endif
- }
- }
-
- prepare_execute_command ();
+ cleanup_if_error = make_bpstat_clear_actions_cleanup ();
+ cleanup = prepare_execute_command ();
/* Force cleanup of any alloca areas if using C alloca instead of
a builtin alloca. */
/* This can happen when command_line_input hits end of file. */
if (p == NULL)
- return;
+ {
+ do_cleanups (cleanup);
+ return;
+ }
target_log_command (p);
*(p + 1) = '\0';
}
- /* If this command has been pre-hooked, run the hook first. */
+ /* If this command has been pre-hooked, run the hook first. */
execute_cmd_pre_hook (c);
if (c->flags & DEPRECATED_WARN_USER)
deprecated_call_command_hook (c, arg, from_tty & caution);
else
cmd_func (c, arg, from_tty & caution);
-
- /* If this command has been post-hooked, run the hook last. */
+
+ /* If the interpreter is in sync mode (we're running a user
+ command's list, running command hooks or similars), and we
+ just ran a synchronous command that started the target, wait
+ for that command to end. */
+ if (!interpreter_async && sync_execution)
+ {
+ while (gdb_do_one_event () >= 0)
+ if (!sync_execution)
+ break;
+ }
+
+ /* If this command has been post-hooked, run the hook last. */
execute_cmd_post_hook (c);
}
- /* Tell the user if the language has changed (except first time). */
+ /* Tell the user if the language has changed (except first time).
+ First make sure that a new frame has been selected, in case this
+ command or the hooks changed the program state. */
+ deprecated_safe_get_selected_frame ();
if (current_language != expected_language)
{
- if (language_mode == language_mode_auto)
+ if (language_mode == language_mode_auto && info_verbose)
{
language_info (1); /* Print what changed. */
}
/* Warn the user if the working language does not match the
language of the current frame. Only warn the user if we are
- actually running the program, i.e. there is a stack. */
+ actually running the program, i.e. there is a stack. */
/* FIXME: This should be cacheing the frame and only running when
the frame changes. */
warned = 1;
}
}
+
+ do_cleanups (cleanup);
+ discard_cleanups (cleanup_if_error);
+}
+
+/* Run execute_command for P and FROM_TTY. Capture its output into the
+ returned string, do not display it to the screen. BATCH_FLAG will be
+ temporarily set to true. */
+
+char *
+execute_command_to_string (char *p, int from_tty)
+{
+ struct ui_file *str_file;
+ struct cleanup *cleanup;
+ char *retval;
+
+ /* GDB_STDOUT should be better already restored during these
+ restoration callbacks. */
+ cleanup = set_batch_flag_and_make_cleanup_restore_page_info ();
+
+ make_cleanup_restore_integer (&interpreter_async);
+ interpreter_async = 0;
+
+ str_file = mem_fileopen ();
+
+ make_cleanup_ui_file_delete (str_file);
+ make_cleanup_restore_ui_file (&gdb_stdout);
+ make_cleanup_restore_ui_file (&gdb_stderr);
+ make_cleanup_restore_ui_file (&gdb_stdlog);
+ make_cleanup_restore_ui_file (&gdb_stdtarg);
+ make_cleanup_restore_ui_file (&gdb_stdtargerr);
+
+ if (ui_out_redirect (current_uiout, str_file) < 0)
+ warning (_("Current output protocol does not support redirection"));
+ else
+ make_cleanup_ui_out_redirect_pop (current_uiout);
+
+ gdb_stdout = str_file;
+ gdb_stderr = str_file;
+ gdb_stdlog = str_file;
+ gdb_stdtarg = str_file;
+ gdb_stdtargerr = str_file;
+
+ execute_command (p, from_tty);
+
+ retval = ui_file_xstrdup (str_file, NULL);
+
+ do_cleanups (cleanup);
+
+ return retval;
}
/* Read commands from `instream' and execute them
struct cleanup *old_chain;
char *command;
int stdin_is_tty = ISATTY (stdin);
- long time_at_cmd_start;
-#ifdef HAVE_SBRK
- long space_at_cmd_start = 0;
-#endif
- extern int display_time;
- extern int display_space;
while (instream && !feof (instream))
{
reinitialize_more_filter ();
old_chain = make_cleanup (null_cleanup, 0);
- /* Get a command-line. This calls the readline package. */
+ /* Get a command-line. This calls the readline package. */
command = command_line_input (instream == stdin ?
get_prompt () : (char *) NULL,
instream == stdin, "prompt");
if (command == 0)
- return;
-
- time_at_cmd_start = get_run_time ();
-
- if (display_space)
{
-#ifdef HAVE_SBRK
- char *lim = (char *) sbrk (0);
- space_at_cmd_start = lim - lim_at_start;
-#endif
+ do_cleanups (old_chain);
+ return;
}
+ make_command_stats_cleanup (1);
+
execute_command (command, instream == stdin);
/* Do any commands attached to breakpoint we are stopped at. */
bpstat_do_actions ();
do_cleanups (old_chain);
-
- if (display_time)
- {
- long cmd_time = get_run_time () - time_at_cmd_start;
-
- printf_unfiltered (_("Command execution time: %ld.%06ld\n"),
- cmd_time / 1000000, cmd_time % 1000000);
- }
-
- if (display_space)
- {
-#ifdef HAVE_SBRK
- char *lim = (char *) sbrk (0);
- long space_now = lim - lim_at_start;
- long space_diff = space_now - space_at_cmd_start;
-
- printf_unfiltered (_("Space used: %ld (%s%ld for this command)\n"),
- space_now,
- (space_diff >= 0 ? "+" : ""),
- space_diff);
-#endif
- }
}
}
\f
+/* When nonzero, cause dont_repeat to do nothing. This should only be
+ set via prevent_dont_repeat. */
+
+static int suppress_dont_repeat = 0;
+
/* Commands call this if they do not want to be repeated by null lines. */
void
dont_repeat (void)
{
- if (server_command)
+ if (suppress_dont_repeat || server_command)
return;
/* If we aren't reading from standard input, we are saving the last
- thing read from stdin in line and don't want to delete it. Null lines
- won't repeat here in any case. */
+ thing read from stdin in line and don't want to delete it. Null
+ lines won't repeat here in any case. */
if (instream == stdin)
- *line = 0;
+ *saved_command_line = 0;
}
+
+/* Prevent dont_repeat from working, and return a cleanup that
+ restores the previous state. */
+
+struct cleanup *
+prevent_dont_repeat (void)
+{
+ struct cleanup *result = make_cleanup_restore_integer (&suppress_dont_repeat);
+
+ suppress_dont_repeat = 1;
+ return result;
+}
+
\f
/* Read a line from the stream "instream" without command line editing.
/* NOTE 1999-04-29: This variable will be static again, once we modify
gdb to use the event loop as the default command loop and we merge
- event-top.c into this file, top.c */
+ event-top.c into this file, top.c. */
/* static */ int history_expansion_p;
show_history_filename (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-The filename in which to record the command history is \"%s\".\n"),
+ fprintf_filtered (file, _("The filename in which to record "
+ "the command history is \"%s\".\n"),
value);
}
(*after_char_processing_hook) ();
gdb_assert (after_char_processing_hook == NULL);
- /* gdb_do_one_event argument is unused. */
- while (gdb_do_one_event (NULL) >= 0)
+ while (gdb_do_one_event () >= 0)
if (gdb_readline_wrapper_done)
break;
}
\f
-#ifdef STOP_SIGNAL
-static void
-stop_sig (int signo)
-{
-#if STOP_SIGNAL == SIGTSTP
- signal (SIGTSTP, SIG_DFL);
-#if HAVE_SIGPROCMASK
- {
- sigset_t zero;
-
- sigemptyset (&zero);
- sigprocmask (SIG_SETMASK, &zero, 0);
- }
-#elif HAVE_SIGSETMASK
- sigsetmask (0);
-#endif
- kill (getpid (), SIGTSTP);
- signal (SIGTSTP, stop_sig);
-#else
- signal (STOP_SIGNAL, stop_sig);
-#endif
- printf_unfiltered ("%s", get_prompt ());
- gdb_flush (gdb_stdout);
-
- /* Forget about any previous command -- null line now will do nothing. */
- dont_repeat ();
-}
-#endif /* STOP_SIGNAL */
-
-/* Initialize signal handlers. */
-static void
-float_handler (int signo)
-{
- /* This message is based on ANSI C, section 4.7. Note that integer
- divide by zero causes this, so "float" is a misnomer. */
- signal (SIGFPE, float_handler);
- error (_("Erroneous arithmetic operation."));
-}
-
-static void
-do_nothing (int signo)
-{
- /* Under System V the default disposition of a signal is reinstated after
- the signal is caught and delivered to an application process. On such
- systems one must restore the replacement signal handler if one wishes
- to continue handling the signal in one's program. On BSD systems this
- is not needed but it is harmless, and it simplifies the code to just do
- it unconditionally. */
- signal (signo, do_nothing);
-}
-
/* The current saved history number from operate-and-get-next.
This is -1 if not valid. */
static int operate_saved_history = -1;
gdb_rl_operate_and_get_next_completion (void)
{
int delta = where_history () - operate_saved_history;
+
/* The `key' argument to rl_get_previous_history is ignored. */
rl_get_previous_history (delta, 0);
operate_saved_history = -1;
while (1)
{
- /* Make sure that all output has been output. Some machines may let
- you get away with leaving out some of the gdb_flush, but not all. */
+ /* Make sure that all output has been output. Some machines may
+ let you get away with leaving out some of the gdb_flush, but
+ not all. */
wrap_here ("");
gdb_flush (gdb_stdout);
gdb_flush (gdb_stderr);
}
p1 = rl;
/* Copy line. Don't copy null at end. (Leaves line alone
- if this was just a newline) */
+ if this was just a newline). */
while (*p1)
*p++ = *p1++;
if (expanded < 0)
{
xfree (history_value);
- return command_line_input (prompt_arg, repeat, annotation_suffix);
+ return command_line_input (prompt_arg, repeat,
+ annotation_suffix);
}
if (strlen (history_value) > linelength)
{
xfree (history_value);
}
- /* If we just got an empty line, and that is supposed
- to repeat the previous command, return the value in the
- global buffer. */
+ /* If we just got an empty line, and that is supposed to repeat the
+ previous command, return the value in the global buffer. */
if (repeat && p == linebuffer)
- return line;
+ return saved_command_line;
for (p1 = linebuffer; *p1 == ' ' || *p1 == '\t'; p1++);
if (repeat && !*p1)
- return line;
+ return saved_command_line;
*p = 0;
and remove the '#'. The kill ring is probably better, but some
people are in the habit of commenting things out. */
if (*p1 == '#')
- *p1 = '\0'; /* Found a comment. */
+ *p1 = '\0'; /* Found a comment. */
/* Save into global buffer if appropriate. */
if (repeat)
{
- if (linelength > linesize)
+ if (linelength > saved_command_line_size)
{
- line = xrealloc (line, linelength);
- linesize = linelength;
+ saved_command_line = xrealloc (saved_command_line, linelength);
+ saved_command_line_size = linelength;
}
- strcpy (line, linebuffer);
- return line;
+ strcpy (saved_command_line, linebuffer);
+ return saved_command_line;
}
return linebuffer;
}
\f
-/* Print the GDB banner. */
+/* Print the GDB banner. */
void
print_gdb_version (struct ui_file *stream)
{
/* From GNU coding standards, first line is meant to be easy for a
program to parse, and is just canonical program name and version
- number, which starts after last space. */
+ number, which starts after last space. */
fprintf_filtered (stream, "GNU gdb %s%s\n", PKGVERSION, version);
- /* Second line is a copyright notice. */
+ /* Second line is a copyright notice. */
- fprintf_filtered (stream, "Copyright (C) 2009 Free Software Foundation, Inc.\n");
+ fprintf_filtered (stream,
+ "Copyright (C) 2011 Free Software Foundation, Inc.\n");
/* Following the copyright is a brief statement that the program is
free software, that users are free to copy and change it on
certain conditions, that it is covered by the GNU GPL, and that
- there is no warranty. */
+ there is no warranty. */
fprintf_filtered (stream, "\
-License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\n\
-This is free software: you are free to change and redistribute it.\n\
+License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\
+\nThis is free software: you are free to change and redistribute it.\n\
There is NO WARRANTY, to the extent permitted by law. Type \"show copying\"\n\
and \"show warranty\" for details.\n");
- /* After the required info we print the configuration information. */
+ /* After the required info we print the configuration information. */
fprintf_filtered (stream, "This GDB was configured as \"");
if (strcmp (host_name, target_name) != 0)
{
- fprintf_filtered (stream, "--host=%s --target=%s", host_name, target_name);
+ fprintf_filtered (stream, "--host=%s --target=%s",
+ host_name, target_name);
}
else
{
}
}
\f
-/* get_prompt: access method for the GDB prompt string. */
+
+/* The current top level prompt, settable with "set prompt", and/or
+ with the python `gdb.prompt_hook' hook. */
+static char *top_prompt;
+
+/* Access method for the GDB prompt string. */
char *
get_prompt (void)
{
- return PROMPT (0);
+ return top_prompt;
}
+/* Set method for the GDB prompt string. */
+
void
-set_prompt (char *s)
+set_prompt (const char *s)
{
-/* ??rehrauer: I don't know why this fails, since it looks as though
- assignments to prompt are wrapped in calls to xstrdup...
- if (prompt != NULL)
- xfree (prompt);
- */
- PROMPT (0) = xstrdup (s);
+ char *p = xstrdup (s);
+
+ xfree (top_prompt);
+ top_prompt = p;
}
\f
struct qt_args *qt = args;
struct thread_info *thread;
+ if (inf->pid == 0)
+ return 0;
+
thread = any_thread_of_process (inf->pid);
if (thread != NULL)
{
{
struct ui_file *stb = arg;
+ if (inf->pid == 0)
+ return 0;
+
if (inf->attach_flag)
fprintf_filtered (stb,
_("\tInferior %d [%s] will be detached.\n"), inf->num,
if (write_history_p && history_filename)
write_history (history_filename);
- do_final_cleanups (ALL_CLEANUPS); /* Do any final cleanups before exiting */
-
+ do_final_cleanups (ALL_CLEANUPS); /* Do any final cleanups before
+ exiting. */
return 0;
}
struct qt_args qt;
/* An optional expression may be used to cause gdb to terminate with the
- value of that expression. */
+ value of that expression. */
if (args)
{
struct value *val = parse_and_eval (args);
exit (exit_code);
}
-/* If OFF, the debugger will run in non-interactive mode, which means
- that it will automatically select the default answer to all the
- queries made to the user. If ON, gdb will wait for the user to
- answer all queries. If AUTO, gdb will determine whether to run
- in interactive mode or not depending on whether stdin is a terminal
- or not. */
-static enum auto_boolean interactive_mode = AUTO_BOOLEAN_AUTO;
-
-/* Implement the "show interactive-mode" option. */
-
-static void
-show_interactive_mode (struct ui_file *file, int from_tty,
- struct cmd_list_element *c,
- const char *value)
-{
- if (interactive_mode == AUTO_BOOLEAN_AUTO)
- fprintf_filtered (file, "\
-Debugger's interactive mode is %s (currently %s).\n",
- value, input_from_terminal_p () ? "on" : "off");
- else
- fprintf_filtered (file, "Debugger's interactive mode is %s.\n", value);
-}
-
/* Returns whether GDB is running on a terminal and input is
currently coming from that terminal. */
int
input_from_terminal_p (void)
{
- if (interactive_mode != AUTO_BOOLEAN_AUTO)
- return interactive_mode == AUTO_BOOLEAN_TRUE;
+ if (batch_flag)
+ return 0;
if (gdb_has_a_terminal () && instream == stdin)
return 1;
static void
dont_repeat_command (char *ignored, int from_tty)
{
- *line = 0; /* Can't call dont_repeat here because we're not
- necessarily reading from stdin. */
+ /* Can't call dont_repeat here because we're not necessarily reading
+ from stdin. */
+ *saved_command_line = 0;
}
\f
/* Functions to manipulate command line editing control variables. */
void
set_history (char *args, int from_tty)
{
- printf_unfiltered (_("\"set history\" must be followed by the name of a history subcommand.\n"));
+ printf_unfiltered (_("\"set history\" must be followed "
+ "by the name of a history subcommand.\n"));
help_list (sethistlist, "set history ", -1, gdb_stdout);
}
cmd_show_list (showhistlist, from_tty, "");
}
-int info_verbose = 0; /* Default verbose msgs off */
+int info_verbose = 0; /* Default verbose msgs off. */
/* Called by do_setshow_command. An elaborate joke. */
void
struct cmd_list_element *showcmd;
showcmd = lookup_cmd_1 (&cmdname, showlist, NULL, 1);
+ gdb_assert (showcmd != NULL && showcmd != CMD_LIST_AMBIGUOUS);
if (info_verbose)
{
}
/* Init the history buffer. Note that we are called after the init file(s)
- * have been read so that the user can change the history file via his
- * .gdbinit file (for instance). The GDBHISTFILE environment variable
- * overrides all of this.
- */
+ have been read so that the user can change the history file via his
+ .gdbinit file (for instance). The GDBHISTFILE environment variable
+ overrides all of this. */
void
init_history (void)
}
static void
-show_new_async_prompt (struct ui_file *file, int from_tty,
- struct cmd_list_element *c, const char *value)
+show_prompt (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
{
fprintf_filtered (file, _("Gdb's prompt is \"%s\".\n"), value);
}
show_async_command_editing_p (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-Editing of command lines as they are typed is %s.\n"),
+ fprintf_filtered (file, _("Editing of command lines as "
+ "they are typed is %s.\n"),
value);
}
show_exec_done_display_p (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
- fprintf_filtered (file, _("\
-Notification of completion for asynchronous execution commands is %s.\n"),
+ fprintf_filtered (file, _("Notification of completion for "
+ "asynchronous execution commands is %s.\n"),
value);
}
static void
init_main (void)
{
- struct cmd_list_element *c;
+ /* Initialize the prompt to a simple "(gdb) " prompt or to whatever
+ the DEFAULT_PROMPT is. */
+ set_prompt (DEFAULT_PROMPT);
- /* initialize the prompt stack to a simple "(gdb) " prompt or to
- whatever the DEFAULT_PROMPT is. */
- the_prompts.top = 0;
- PREFIX (0) = "";
- PROMPT (0) = xstrdup (DEFAULT_PROMPT);
- SUFFIX (0) = "";
/* Set things up for annotation_level > 1, if the user ever decides
to use it. */
async_annotation_suffix = "prompt";
- /* Set the variable associated with the setshow prompt command. */
- new_async_prompt = xstrdup (PROMPT (0));
-
- /* If gdb was started with --annotate=2, this is equivalent to the
- user entering the command 'set annotate 2' at the gdb prompt, so
- we need to do extra processing. */
- if (annotation_level > 1)
- set_async_annotation_level (NULL, 0, NULL);
/* Set the important stuff up for command editing. */
command_editing_p = 1;
rl_add_defun ("operate-and-get-next", gdb_rl_operate_and_get_next, 15);
add_setshow_string_cmd ("prompt", class_support,
- &new_async_prompt, _("\
-Set gdb's prompt"), _("\
-Show gdb's prompt"), NULL,
- set_async_prompt,
- show_new_async_prompt,
+ &top_prompt,
+ _("Set gdb's prompt"),
+ _("Show gdb's prompt"),
+ NULL, NULL,
+ show_prompt,
&setlist, &showlist);
add_com ("dont-repeat", class_support, dont_repeat_command, _("\
-Don't repeat this command.\n\
-Primarily used inside of user-defined commands that should not be repeated when\n\
+Don't repeat this command.\nPrimarily \
+used inside of user-defined commands that should not be repeated when\n\
hitting return."));
add_setshow_boolean_cmd ("editing", class_support,
Show annotation_level."), _("\
0 == normal; 1 == fullname (for use when running under emacs)\n\
2 == output annotated suitably for use by programs that control GDB."),
- set_async_annotation_level,
+ NULL,
show_annotation_level,
&setlist, &showlist);
show_exec_done_display_p,
&setlist, &showlist);
- add_setshow_auto_boolean_cmd ("interactive-mode", class_support,
- &interactive_mode, _("\
-Set whether GDB should run in interactive mode or not"), _("\
-Show whether GDB runs in interactive mode"), _("\
-If on, run in interactive mode and wait for the user to answer\n\
-all queries. If off, run in non-interactive mode and automatically\n\
-assume the default answer to all queries. If auto (the default),\n\
-determine which mode to use based on the standard input settings"),
- NULL,
- show_interactive_mode,
- &setlist, &showlist);
-
add_setshow_filename_cmd ("data-directory", class_maintenance,
&gdb_datadir, _("Set GDB's data directory."),
_("Show GDB's data directory."),
if (pre_init_ui_hook)
pre_init_ui_hook ();
- /* Run the init function of each source file */
+ /* Run the init function of each source file. */
#ifdef __MSDOS__
/* Make sure we return to the original directory upon exit, come
make_final_cleanup (do_chdir_cleanup, xstrdup (current_directory));
#endif
- init_cmd_lists (); /* This needs to be done first */
- initialize_targets (); /* Setup target_terminal macros for utils.c */
- initialize_utils (); /* Make errors and warnings possible */
+ init_cmd_lists (); /* This needs to be done first. */
+ initialize_targets (); /* Setup target_terminal macros for utils.c. */
+ initialize_utils (); /* Make errors and warnings possible. */
+
+ /* Here is where we call all the _initialize_foo routines. */
initialize_all_files ();
+
+ /* This creates the current_program_space. Do this after all the
+ _initialize_foo routines have had a chance to install their
+ per-sspace data keys. Also do this before
+ initialize_current_architecture is called, because it accesses
+ exec_bfd of the current program space. */
+ initialize_progspace ();
+ initialize_inferiors ();
initialize_current_architecture ();
init_cli_cmds();
- init_main (); /* But that omits this file! Do it now */
+ init_main (); /* But that omits this file! Do it now. */
initialize_stdin_serial ();
async_init_signals ();
- /* We need a default language for parsing expressions, so simple things like
- "set width 0" won't fail if no language is explicitly set in a config file
- or implicitly set by reading an executable during startup. */
+ /* We need a default language for parsing expressions, so simple
+ things like "set width 0" won't fail if no language is explicitly
+ set in a config file or implicitly set by reading an executable
+ during startup. */
set_language (language_c);
- expected_language = current_language; /* don't warn about the change. */
+ expected_language = current_language; /* Don't warn about the change. */
- /* Allow another UI to initialize. If the UI fails to initialize,
+ /* Allow another UI to initialize. If the UI fails to initialize,
and it wants GDB to revert to the CLI, it should clear
deprecated_init_ui_hook. */
if (deprecated_init_ui_hook)
deprecated_init_ui_hook (argv0);
+
+#ifdef HAVE_PYTHON
+ /* Python initialization can require various commands to be
+ installed. For example "info pretty-printer" needs the "info"
+ prefix to be installed. Keep things simple and just do final
+ python initialization here. */
+ finish_python_initialization ();
+#endif
}