#include "language.h"
#include "terminal.h" /* For job_control. */
#include "annotate.h"
+#include "completer.h"
#include "top.h"
#include "version.h"
#include "cli-out.h"
#endif
-/* Prototypes for local functions */
-
-static void dont_repeat_command PARAMS ((char *, int));
-
-static void source_cleanup_lines PARAMS ((PTR));
-
-static void user_defined_command PARAMS ((char *, int));
-
-static void init_signals PARAMS ((void));
-
-#ifdef STOP_SIGNAL
-static void stop_sig PARAMS ((int));
-#endif
-
-static char *line_completion_function PARAMS ((char *, int, char *, int));
-
-static char *readline_line_completion_function PARAMS ((char *, int));
-
-/* NOTE 1999-04-29: this function will be static again, after we make the
- event loop be the default command loop for gdb, and we merge
- event-top.c into this file, top.c */
-/* static */ void command_loop_marker PARAMS ((int));
-
-static void while_command PARAMS ((char *, int));
-
-static void if_command PARAMS ((char *, int));
-
-static struct command_line *
- build_command_line PARAMS ((enum command_control_type, char *));
-
-static struct command_line *
- get_command_line PARAMS ((enum command_control_type, char *));
+/* From completer.c */
-static void realloc_body_list PARAMS ((struct command_line *, int));
+extern int is_complete_command (void (*func) (char *args, int from_tty));
-static enum misc_command_type read_next_line PARAMS ((struct command_line **));
+/* From cli/cli-cmds.c */
-static enum command_control_type
-recurse_read_control_structure PARAMS ((struct command_line *));
+extern void init_cmd_lists (void);
-static struct cleanup *setup_user_args PARAMS ((char *));
+extern void init_cli_cmds (void);
-static char *locate_arg PARAMS ((char *));
+extern void execute_user_command (struct cmd_list_element *c, char *args);
-static char *insert_args PARAMS ((char *));
+/* From cli/cli-setshow.c */
-static void arg_cleanup PARAMS ((void));
+extern void do_setshow_command (char *, int, struct cmd_list_element *);
-static void init_main PARAMS ((void));
+/* Exported to CLI cli/cli-cmds.c. */
-static void init_cmd_lists PARAMS ((void));
+void set_verbose (char *, int, struct cmd_list_element *);
-static void float_handler PARAMS ((int));
+void show_history (char *, int);
-static void init_signals PARAMS ((void));
+void set_history (char *, int);
-static void set_verbose PARAMS ((char *, int, struct cmd_list_element *));
+void show_commands (char *, int);
-static void show_history PARAMS ((char *, int));
+void do_restore_instream_cleanup (void *stream);
-static void set_history PARAMS ((char *, int));
-
-static void set_history_size_command PARAMS ((char *, int,
- struct cmd_list_element *));
-
-static void show_commands PARAMS ((char *, int));
-
-static void echo_command PARAMS ((char *, int));
-
-static void pwd_command PARAMS ((char *, int));
-
-static void show_version PARAMS ((char *, int));
-
-static void document_command PARAMS ((char *, int));
+/* Prototypes for local functions */
-static void define_command PARAMS ((char *, int));
+static void dont_repeat_command (char *, int);
-static void validate_comname PARAMS ((char *));
+static void init_signals (void);
-static void help_command PARAMS ((char *, int));
+#ifdef STOP_SIGNAL
+static void stop_sig (int);
+#endif
-static void show_command PARAMS ((char *, int));
+static char *readline_line_completion_function (char *, int);
-static void info_command PARAMS ((char *, int));
+static void init_main (void);
-static void complete_command PARAMS ((char *, int));
+static void float_handler (int);
-static void do_nothing PARAMS ((int));
+static void init_signals (void);
-static void show_debug PARAMS ((char *, int));
+static void set_history_size_command (char *, int, struct cmd_list_element *);
-static void set_debug PARAMS ((char *, int));
+static void do_nothing (int);
#ifdef SIGHUP
/* NOTE 1999-04-29: This function will be static again, once we modify
gdb to use the event loop as the default command loop and we merge
event-top.c into this file, top.c */
-/* static */ int quit_cover PARAMS ((PTR));
+/* static */ int quit_cover (PTR);
-static void disconnect PARAMS ((int));
+static void disconnect (int);
#endif
-static void source_cleanup PARAMS ((FILE *));
-
/* Default command line prompt. This is overriden in some configs. */
#ifndef DEFAULT_PROMPT
int caution = 1; /* Default is yes, sigh. */
-/* Define all cmd_list_elements. */
-
-/* Chain containing all defined commands. */
-
-struct cmd_list_element *cmdlist;
-
-/* Chain containing all defined info subcommands. */
-
-struct cmd_list_element *infolist;
-
-/* Chain containing all defined enable subcommands. */
-
-struct cmd_list_element *enablelist;
-
-/* Chain containing all defined disable subcommands. */
-
-struct cmd_list_element *disablelist;
-
-/* Chain containing all defined toggle subcommands. */
-
-struct cmd_list_element *togglelist;
-
-/* Chain containing all defined stop subcommands. */
-
-struct cmd_list_element *stoplist;
-
-/* Chain containing all defined delete subcommands. */
-
-struct cmd_list_element *deletelist;
-
-/* Chain containing all defined "enable breakpoint" subcommands. */
-
-struct cmd_list_element *enablebreaklist;
-
-/* Chain containing all defined set subcommands */
-
-struct cmd_list_element *setlist;
-
-/* Chain containing all defined unset subcommands */
-
-struct cmd_list_element *unsetlist;
-
-/* Chain containing all defined show subcommands. */
-
-struct cmd_list_element *showlist;
-
-/* Chain containing all defined \"set history\". */
-
-struct cmd_list_element *sethistlist;
-
-/* Chain containing all defined \"show history\". */
-
-struct cmd_list_element *showhistlist;
-
-/* Chain containing all defined \"unset history\". */
-
-struct cmd_list_element *unsethistlist;
-
-/* Chain containing all defined maintenance subcommands. */
-
-struct cmd_list_element *maintenancelist;
-
-/* Chain containing all defined "maintenance info" subcommands. */
-
-struct cmd_list_element *maintenanceinfolist;
-
-/* Chain containing all defined "maintenance print" subcommands. */
-
-struct cmd_list_element *maintenanceprintlist;
-
-struct cmd_list_element *setprintlist;
-
-struct cmd_list_element *showprintlist;
-
-struct cmd_list_element *setdebuglist;
-
-struct cmd_list_element *showdebuglist;
-
-struct cmd_list_element *setchecklist;
-
-struct cmd_list_element *showchecklist;
-
/* stdio stream that command input is being read from. Set to stdin normally.
Set by source_command to the file we are sourcing. Set to NULL if we are
executing a user-defined command or interacting via a GUI. */
The function receives two args: an input stream,
and a prompt string. */
-void (*window_hook) PARAMS ((FILE *, char *));
+void (*window_hook) (FILE *, char *);
int epoch_interface;
int xgdb_verbose;
/* gdb prints this when reading a command interactively */
static char *gdb_prompt_string; /* the global prompt string */
-extern char *get_prompt PARAMS ((void)); /* access function for prompt string */
+extern char *get_prompt (void); /* access function for prompt string */
/* Buffer used for reading command lines, and the size
allocated for it so far. */
#ifndef STOP_SIGNAL
#ifdef SIGTSTP
#define STOP_SIGNAL SIGTSTP
-static void stop_sig PARAMS ((int));
+static void stop_sig (int);
#endif
#endif
/* Called after most modules have been initialized, but before taking users
command file. */
-void (*init_ui_hook) PARAMS ((char *argv0));
+void (*init_ui_hook) (char *argv0);
/* This hook is called from within gdb's many mini-event loops which could
steal control from a real user interface's event loop. It returns
non-zero if the user is requesting a detach, zero otherwise. */
-int (*ui_loop_hook) PARAMS ((int));
+int (*ui_loop_hook) (int);
/* Called instead of command_loop at top level. Can be invoked via
return_to_top_level. */
-void (*command_loop_hook) PARAMS ((void));
+void (*command_loop_hook) (void);
/* Called from print_frame_info to list the line we stopped in. */
-void (*print_frame_info_listing_hook) PARAMS ((struct symtab * s, int line,
- int stopline, int noerror));
+void (*print_frame_info_listing_hook) (struct symtab * s, int line,
+ int stopline, int noerror);
/* Replaces most of query. */
-int (*query_hook) PARAMS ((const char *, va_list));
+int (*query_hook) (const char *, va_list);
/* Replaces most of warning. */
-void (*warning_hook) PARAMS ((const char *, va_list));
+void (*warning_hook) (const char *, va_list);
/* These three functions support getting lines of text from the user. They
are used in sequence. First readline_begin_hook is called with a text
to notify the GUI that we are done with the interaction window and it
can close it. */
-void (*readline_begin_hook) PARAMS ((char *,...));
-char *(*readline_hook) PARAMS ((char *));
-void (*readline_end_hook) PARAMS ((void));
+void (*readline_begin_hook) (char *, ...);
+char *(*readline_hook) (char *);
+void (*readline_end_hook) (void);
/* Called as appropriate to notify the interface of the specified breakpoint
conditions. */
-void (*create_breakpoint_hook) PARAMS ((struct breakpoint * bpt));
-void (*delete_breakpoint_hook) PARAMS ((struct breakpoint * bpt));
-void (*modify_breakpoint_hook) PARAMS ((struct breakpoint * bpt));
+void (*create_breakpoint_hook) (struct breakpoint * bpt);
+void (*delete_breakpoint_hook) (struct breakpoint * bpt);
+void (*modify_breakpoint_hook) (struct breakpoint * bpt);
/* Called as appropriate to notify the interface that we have attached
to or detached from an already running process. */
-void (*attach_hook) PARAMS ((void));
-void (*detach_hook) PARAMS ((void));
+void (*attach_hook) (void);
+void (*detach_hook) (void);
/* Called during long calculations to allow GUI to repair window damage, and to
check for stop buttons, etc... */
-void (*interactive_hook) PARAMS ((void));
+void (*interactive_hook) (void);
/* Called when the registers have changed, as a hint to a GUI
to minimize window update. */
-void (*registers_changed_hook) PARAMS ((void));
+void (*registers_changed_hook) (void);
/* Tell the GUI someone changed the register REGNO. -1 means
that the caller does not know which register changed or
that several registers have changed (see value_assign). */
-void (*register_changed_hook) PARAMS ((int regno));
+void (*register_changed_hook) (int regno);
/* Tell the GUI someone changed LEN bytes of memory at ADDR */
-void (*memory_changed_hook) PARAMS ((CORE_ADDR addr, int len));
+void (*memory_changed_hook) (CORE_ADDR addr, int len);
/* Called when going to wait for the target. Usually allows the GUI to run
while waiting for target events. */
-int (*target_wait_hook) PARAMS ((int pid, struct target_waitstatus * status));
+int (*target_wait_hook) (int pid, struct target_waitstatus * status);
/* Used by UI as a wrapper around command execution. May do various things
like enabling/disabling buttons, etc... */
-void (*call_command_hook) PARAMS ((struct cmd_list_element * c, char *cmd,
- int from_tty));
+void (*call_command_hook) (struct cmd_list_element * c, char *cmd,
+ int from_tty);
/* Called after a `set' command has finished. Is only run if the
`set' command succeeded. */
/* Called when the current thread changes. Argument is thread id. */
-void (*context_hook) PARAMS ((int id));
+void (*context_hook) (int id);
/* Takes control from error (). Typically used to prevent longjmps out of the
middle of the GUI. Usually used in conjunction with a catch routine. */
/* Return for reason REASON to the nearest containing catch_errors(). */
NORETURN void
-return_to_top_level (reason)
- enum return_reason reason;
+return_to_top_level (enum return_reason reason)
{
quit_flag = 0;
immediate_quit = 0;
code also randomly used a SET_TOP_LEVEL macro that directly
initialize the longjmp buffers. */
-/* MAYBE: cagney/1999-11-05: Should the catch_erros and cleanups code
+/* MAYBE: cagney/1999-11-05: Should the catch_errors and cleanups code
be consolidated into a single file instead of being distributed
between utils.c and top.c? */
int
-catch_errors (func, args, errstring, mask)
- catch_errors_ftype *func;
- PTR args;
- char *errstring;
- return_mask mask;
+catch_errors (catch_errors_ftype *func, PTR args, char *errstring,
+ return_mask mask)
{
SIGJMP_BUF *saved_catch;
SIGJMP_BUF catch;
caught = SIGSETJMP (catch);
if (!caught)
val = (*func) (args);
+ else
+ val = 0;
catch_return = saved_catch;
- /* FIXME: cagney/1999-11-05: A correct FUNC implementaton will
+ /* FIXME: cagney/1999-11-05: A correct FUNC implementation will
clean things up (restoring the cleanup chain) to the state they
- were just prior to the call. Unfortunatly, many FUNC's are not
+ were just prior to the call. Unfortunately, many FUNC's are not
that well behaved. This could be fixed by adding either a
do_cleanups call (to cover the problem) or an assertion check to
detect bad FUNCs code. */
/* FIXME: cagney/1999-11-07: Technically this do_cleanups() call
isn't needed. Instead an assertion check could be made that
simply confirmed that the called function correctly cleaned up
- after its self. Unfortunatly, old code (prior to 1999-11-04) in
+ after itself. Unfortunately, old code (prior to 1999-11-04) in
main.c was calling SET_TOP_LEVEL(), calling the command function,
and then *always* calling do_cleanups(). For the moment we
remain ``bug compatible'' with that old code.. */
#ifdef SIGHUP
static void
-disconnect (signo)
- int signo;
+disconnect (int signo)
{
catch_errors (quit_cover, NULL,
"Could not kill the program being debugged", RETURN_MASK_ALL);
gdb to use the event loop as the default command loop and we merge
event-top.c into this file, top.c */
/* static */ int
-quit_cover (s)
- PTR s;
+quit_cover (PTR s)
{
caution = 0; /* Throw caution to the wind -- we're exiting.
This prevents asking the user dumb questions. */
/* Clean up on error during a "source" command (or execution of a
user-defined command). */
-static void
-source_cleanup (stream)
- FILE *stream;
+void
+do_restore_instream_cleanup (void *stream)
{
/* Restore the previous input stream. */
instream = stream;
/* Read commands from STREAM. */
void
-read_command_file (stream)
- FILE *stream;
+read_command_file (FILE *stream)
{
struct cleanup *cleanups;
- cleanups = make_cleanup ((make_cleanup_func) source_cleanup, instream);
+ cleanups = make_cleanup (do_restore_instream_cleanup, instream);
instream = stream;
command_loop ();
do_cleanups (cleanups);
}
\f
-extern void init_proc PARAMS ((void));
+extern void init_proc (void);
-void (*pre_init_ui_hook) PARAMS ((void));
+void (*pre_init_ui_hook) (void);
+
+#ifdef __MSDOS__
+void
+do_chdir_cleanup (void *old_dir)
+{
+ chdir (old_dir);
+ free (old_dir);
+}
+#endif
void
-gdb_init (argv0)
- char *argv0;
+gdb_init (char *argv0)
{
if (pre_init_ui_hook)
pre_init_ui_hook ();
#ifdef __MSDOS__
/* Make sure we return to the original directory upon exit, come
what may, since the OS doesn't do that for us. */
- make_final_cleanup ((make_cleanup_func) chdir, strsave (current_directory));
+ make_final_cleanup (do_chdir_cleanup, xstrdup (current_directory));
#endif
init_cmd_lists (); /* This needs to be done first */
initialize_utils (); /* Make errors and warnings possible */
initialize_all_files ();
initialize_current_architecture ();
+ init_cli_cmds();
init_main (); /* But that omits this file! Do it now */
/* The signal handling mechanism is different depending whether or
init_ui_hook (argv0);
}
-/* Allocate, initialize a new command line structure for one of the
- control commands (if/while). */
-
-static struct command_line *
-build_command_line (type, args)
- enum command_control_type type;
- char *args;
-{
- struct command_line *cmd;
-
- if (args == NULL)
- error ("if/while commands require arguments.\n");
-
- cmd = (struct command_line *) xmalloc (sizeof (struct command_line));
- cmd->next = NULL;
- cmd->control_type = type;
-
- cmd->body_count = 1;
- cmd->body_list
- = (struct command_line **) xmalloc (sizeof (struct command_line *)
- * cmd->body_count);
- memset (cmd->body_list, 0, sizeof (struct command_line *) * cmd->body_count);
- cmd->line = savestring (args, strlen (args));
- return cmd;
-}
-
-/* Build and return a new command structure for the control commands
- such as "if" and "while". */
+/* Execute the line P as a command.
+ Pass FROM_TTY as second argument to the defining function. */
-static struct command_line *
-get_command_line (type, arg)
- enum command_control_type type;
- char *arg;
+void
+execute_command (char *p, int from_tty)
{
- struct command_line *cmd;
- struct cleanup *old_chain = NULL;
-
- /* Allocate and build a new command line structure. */
- cmd = build_command_line (type, arg);
+ register struct cmd_list_element *c;
+ register enum language flang;
+ static int warned = 0;
+ char *line;
+ /* FIXME: These should really be in an appropriate header file */
+extern void serial_log_command (const char *);
- old_chain = make_cleanup ((make_cleanup_func) free_command_lines, &cmd);
+ free_all_values ();
- /* Read in the body of this command. */
- if (recurse_read_control_structure (cmd) == invalid_control)
- {
- warning ("error reading in control structure\n");
- do_cleanups (old_chain);
- return NULL;
- }
+ /* Force cleanup of any alloca areas if using C alloca instead of
+ a builtin alloca. */
+ alloca (0);
- discard_cleanups (old_chain);
- return cmd;
-}
+ /* This can happen when command_line_input hits end of file. */
+ if (p == NULL)
+ return;
-/* Recursively print a command (including full control structures). */
-#ifdef UI_OUT
-void
-print_command_lines (uiout, cmd, depth)
- struct ui_out *uiout;
- struct command_line *cmd;
- unsigned int depth;
-{
- struct command_line *list;
+ serial_log_command (p);
- list = cmd;
- while (list)
+ while (*p == ' ' || *p == '\t')
+ p++;
+ if (*p)
{
+ char *arg;
+ line = p;
- if (depth)
- ui_out_spaces (uiout, 2 * depth);
-
- /* A simple command, print it and continue. */
- if (list->control_type == simple_control)
- {
- ui_out_field_string (uiout, NULL, list->line);
- ui_out_text (uiout, "\n");
- list = list->next;
- continue;
- }
-
- /* loop_continue to jump to the start of a while loop, print it
- and continue. */
- if (list->control_type == continue_control)
- {
- ui_out_field_string (uiout, NULL, "loop_continue");
- ui_out_text (uiout, "\n");
- list = list->next;
- continue;
- }
+ c = lookup_cmd (&p, cmdlist, "", 0, 1);
- /* loop_break to break out of a while loop, print it and continue. */
- if (list->control_type == break_control)
- {
- ui_out_field_string (uiout, NULL, "loop_break");
- ui_out_text (uiout, "\n");
- list = list->next;
- continue;
- }
+ /* If the target is running, we allow only a limited set of
+ commands. */
+ if (event_loop_p && target_can_async_p () && target_executing)
+ if (!strcmp (c->name, "help")
+ && !strcmp (c->name, "pwd")
+ && !strcmp (c->name, "show")
+ && !strcmp (c->name, "stop"))
+ error ("Cannot execute this command while the target is running.");
- /* A while command. Recursively print its subcommands and continue. */
- if (list->control_type == while_control)
- {
- ui_out_text (uiout, "while ");
- ui_out_field_fmt (uiout, NULL, "while %s", list->line);
- ui_out_text (uiout, "\n");
- print_command_lines (uiout, *list->body_list, depth + 1);
- ui_out_field_string (uiout, NULL, "end");
- if (depth)
- ui_out_spaces (uiout, 2 * depth);
- ui_out_text (uiout, "end\n");
- list = list->next;
- continue;
- }
+ /* Pass null arg rather than an empty one. */
+ arg = *p ? p : 0;
- /* An if command. Recursively print both arms before continueing. */
- if (list->control_type == if_control)
+ /* Clear off trailing whitespace, except for set and complete command. */
+ if (arg
+ && c->type != set_cmd
+ && !is_complete_command (c->function.cfunc))
{
- ui_out_text (uiout, "if ");
- ui_out_field_fmt (uiout, NULL, "if %s", list->line);
- ui_out_text (uiout, "\n");
- /* The true arm. */
- print_command_lines (uiout, list->body_list[0], depth + 1);
-
- /* Show the false arm if it exists. */
- if (list->body_count == 2)
- {
- if (depth)
- ui_out_spaces (uiout, 2 * depth);
- ui_out_field_string (uiout, NULL, "else");
- ui_out_text (uiout, "else\n");
- print_command_lines (uiout, list->body_list[1], depth + 1);
- }
-
- ui_out_field_string (uiout, NULL, "end");
- if (depth)
- ui_out_spaces (uiout, 2 * depth);
- ui_out_text (uiout, "end\n");
- list = list->next;
- continue;
+ p = arg + strlen (arg) - 1;
+ while (p >= arg && (*p == ' ' || *p == '\t'))
+ p--;
+ *(p + 1) = '\0';
}
- /* ignore illegal command type and try next */
- list = list->next;
- } /* while (list) */
-}
-#else
-void
-print_command_line (cmd, depth, stream)
- struct command_line *cmd;
- unsigned int depth;
- struct ui_file *stream;
-{
- unsigned int i;
-
- if (depth)
- {
- for (i = 0; i < depth; i++)
- fputs_filtered (" ", stream);
- }
+ /* If this command has been pre-hooked, run the hook first. */
+ if ((c->hook_pre) && (!c->hook_in))
+ {
+ c->hook_in = 1; /* Prevent recursive hooking */
+ execute_user_command (c->hook_pre, (char *) 0);
+ c->hook_in = 0; /* Allow hook to work again once it is complete */
+ }
- /* A simple command, print it and return. */
- if (cmd->control_type == simple_control)
- {
- fputs_filtered (cmd->line, stream);
- fputs_filtered ("\n", stream);
- return;
- }
+ if (c->flags & DEPRECATED_WARN_USER)
+ deprecated_cmd_warning (&line);
- /* loop_continue to jump to the start of a while loop, print it
- and return. */
- if (cmd->control_type == continue_control)
- {
- fputs_filtered ("loop_continue\n", stream);
- return;
- }
+ if (c->class == class_user)
+ execute_user_command (c, arg);
+ else if (c->type == set_cmd || c->type == show_cmd)
+ do_setshow_command (arg, from_tty & caution, c);
+ else if (c->function.cfunc == NO_FUNCTION)
+ error ("That is not a command, just a help topic.");
+ else if (call_command_hook)
+ call_command_hook (c, arg, from_tty & caution);
+ else
+ (*c->function.cfunc) (arg, from_tty & caution);
+
+ /* If this command has been post-hooked, run the hook last. */
+ if ((c->hook_post) && (!c->hook_in))
+ {
+ c->hook_in = 1; /* Prevent recursive hooking */
+ execute_user_command (c->hook_post, (char *) 0);
+ c->hook_in = 0; /* allow hook to work again once it is complete */
+ }
- /* loop_break to break out of a while loop, print it and return. */
- if (cmd->control_type == break_control)
- {
- fputs_filtered ("loop_break\n", stream);
- return;
}
- /* A while command. Recursively print its subcommands before returning. */
- if (cmd->control_type == while_control)
+ /* Tell the user if the language has changed (except first time). */
+ if (current_language != expected_language)
{
- struct command_line *list;
- fputs_filtered ("while ", stream);
- fputs_filtered (cmd->line, stream);
- fputs_filtered ("\n", stream);
- list = *cmd->body_list;
- while (list)
+ if (language_mode == language_mode_auto)
{
- print_command_line (list, depth + 1, stream);
- list = list->next;
+ language_info (1); /* Print what changed. */
}
+ warned = 0;
}
- /* An if command. Recursively print both arms before returning. */
- if (cmd->control_type == if_control)
+ /* Warn the user if the working language does not match the
+ language of the current frame. Only warn the user if we are
+ actually running the program, i.e. there is a stack. */
+ /* FIXME: This should be cacheing the frame and only running when
+ the frame changes. */
+
+ if (target_has_stack)
{
- fputs_filtered ("if ", stream);
- fputs_filtered (cmd->line, stream);
- fputs_filtered ("\n", stream);
- /* The true arm. */
- print_command_line (cmd->body_list[0], depth + 1, stream);
-
- /* Show the false arm if it exists. */
- if (cmd->body_count == 2)
- {
- if (depth)
- {
- for (i = 0; i < depth; i++)
- fputs_filtered (" ", stream);
- }
- fputs_filtered ("else\n", stream);
- print_command_line (cmd->body_list[1], depth + 1, stream);
- }
- if (depth)
+ flang = get_frame_language ();
+ if (!warned
+ && flang != language_unknown
+ && flang != current_language->la_language)
{
- for (i = 0; i < depth; i++)
- fputs_filtered (" ", stream);
+ printf_filtered ("%s\n", lang_frame_mismatch_warn);
+ warned = 1;
}
- fputs_filtered ("end\n", stream);
}
}
-#endif
-/* Execute the command in CMD. */
+/* Read commands from `instream' and execute them
+ until end of file or error reading instream. */
-enum command_control_type
-execute_control_command (cmd)
- struct command_line *cmd;
+void
+command_loop (void)
{
- struct expression *expr;
- struct command_line *current;
- struct cleanup *old_chain = 0;
- value_ptr val;
- value_ptr val_mark;
- int loop;
- enum command_control_type ret;
- char *new_line;
-
- switch (cmd->control_type)
+ struct cleanup *old_chain;
+ char *command;
+ int stdin_is_tty = ISATTY (stdin);
+ long time_at_cmd_start;
+#ifdef HAVE_SBRK
+ long space_at_cmd_start = 0;
+#endif
+ extern int display_time;
+ extern int display_space;
+
+ while (instream && !feof (instream))
{
- case simple_control:
- /* A simple command, execute it and return. */
- new_line = insert_args (cmd->line);
- if (!new_line)
- return invalid_control;
- old_chain = make_cleanup ((make_cleanup_func) free_current_contents,
- &new_line);
- execute_command (new_line, 0);
- ret = cmd->control_type;
- break;
-
- case continue_control:
- case break_control:
- /* Return for "continue", and "break" so we can either
- continue the loop at the top, or break out. */
- ret = cmd->control_type;
- break;
-
- case while_control:
- {
- /* Parse the loop control expression for the while statement. */
- new_line = insert_args (cmd->line);
- if (!new_line)
- return invalid_control;
- old_chain = make_cleanup ((make_cleanup_func) free_current_contents,
- &new_line);
- expr = parse_expression (new_line);
- make_cleanup ((make_cleanup_func) free_current_contents, &expr);
-
- ret = simple_control;
- loop = 1;
-
- /* Keep iterating so long as the expression is true. */
- while (loop == 1)
- {
- int cond_result;
-
- QUIT;
-
- /* Evaluate the expression. */
- val_mark = value_mark ();
- val = evaluate_expression (expr);
- cond_result = value_true (val);
- value_free_to_mark (val_mark);
-
- /* If the value is false, then break out of the loop. */
- if (!cond_result)
- break;
-
- /* Execute the body of the while statement. */
- current = *cmd->body_list;
- while (current)
- {
- ret = execute_control_command (current);
-
- /* If we got an error, or a "break" command, then stop
- looping. */
- if (ret == invalid_control || ret == break_control)
- {
- loop = 0;
- break;
- }
+#if defined(TUI)
+ extern int insert_mode;
+#endif
+ if (window_hook && instream == stdin)
+ (*window_hook) (instream, get_prompt ());
- /* If we got a "continue" command, then restart the loop
- at this point. */
- if (ret == continue_control)
- break;
+ quit_flag = 0;
+ if (instream == stdin && stdin_is_tty)
+ reinitialize_more_filter ();
+ old_chain = make_cleanup (null_cleanup, 0);
- /* Get the next statement. */
- current = current->next;
- }
- }
+#if defined(TUI)
+ /* A bit of paranoia: I want to make sure the "insert_mode" global
+ * is clear except when it is being used for command-line editing
+ * (see tuiIO.c, utils.c); otherwise normal output will
+ * get messed up in the TUI. So clear it before/after
+ * the command-line-input call. - RT
+ */
+ insert_mode = 0;
+#endif
+ /* Get a command-line. This calls the readline package. */
+ command = command_line_input (instream == stdin ?
+ get_prompt () : (char *) NULL,
+ instream == stdin, "prompt");
+#if defined(TUI)
+ insert_mode = 0;
+#endif
+ if (command == 0)
+ return;
- /* Reset RET so that we don't recurse the break all the way down. */
- if (ret == break_control)
- ret = simple_control;
+ time_at_cmd_start = get_run_time ();
- break;
- }
+ if (display_space)
+ {
+#ifdef HAVE_SBRK
+ extern char **environ;
+ char *lim = (char *) sbrk (0);
- case if_control:
- {
- new_line = insert_args (cmd->line);
- if (!new_line)
- return invalid_control;
- old_chain = make_cleanup ((make_cleanup_func) free_current_contents,
- &new_line);
- /* Parse the conditional for the if statement. */
- expr = parse_expression (new_line);
- make_cleanup ((make_cleanup_func) free_current_contents, &expr);
-
- current = NULL;
- ret = simple_control;
-
- /* Evaluate the conditional. */
- val_mark = value_mark ();
- val = evaluate_expression (expr);
-
- /* Choose which arm to take commands from based on the value of the
- conditional expression. */
- if (value_true (val))
- current = *cmd->body_list;
- else if (cmd->body_count == 2)
- current = *(cmd->body_list + 1);
- value_free_to_mark (val_mark);
-
- /* Execute commands in the given arm. */
- while (current)
- {
- ret = execute_control_command (current);
-
- /* If we got an error, get out. */
- if (ret != simple_control)
- break;
-
- /* Get the next statement in the body. */
- current = current->next;
- }
+ space_at_cmd_start = (long) (lim - (char *) &environ);
+#endif
+ }
- break;
- }
+ execute_command (command, instream == stdin);
+ /* Do any commands attached to breakpoint we stopped at. */
+ bpstat_do_actions (&stop_bpstat);
+ do_cleanups (old_chain);
- default:
- warning ("Invalid control type in command structure.");
- return invalid_control;
- }
+ if (display_time)
+ {
+ long cmd_time = get_run_time () - time_at_cmd_start;
- if (old_chain)
- do_cleanups (old_chain);
-
- return ret;
-}
-
-/* "while" command support. Executes a body of statements while the
- loop condition is nonzero. */
-
-static void
-while_command (arg, from_tty)
- char *arg;
- int from_tty;
-{
- struct command_line *command = NULL;
-
- control_level = 1;
- command = get_command_line (while_control, arg);
-
- if (command == NULL)
- return;
-
- execute_control_command (command);
- free_command_lines (&command);
-}
-
-/* "if" command support. Execute either the true or false arm depending
- on the value of the if conditional. */
-
-static void
-if_command (arg, from_tty)
- char *arg;
- int from_tty;
-{
- struct command_line *command = NULL;
-
- control_level = 1;
- command = get_command_line (if_control, arg);
-
- if (command == NULL)
- return;
-
- execute_control_command (command);
- free_command_lines (&command);
-}
-
-/* Cleanup */
-static void
-arg_cleanup ()
-{
- struct user_args *oargs = user_args;
- if (!user_args)
- internal_error ("Internal error, arg_cleanup called with no user args.\n");
-
- user_args = user_args->next;
- free (oargs);
-}
-
-/* Bind the incomming arguments for a user defined command to
- $arg0, $arg1 ... $argMAXUSERARGS. */
-
-static struct cleanup *
-setup_user_args (p)
- char *p;
-{
- struct user_args *args;
- struct cleanup *old_chain;
- unsigned int arg_count = 0;
-
- args = (struct user_args *) xmalloc (sizeof (struct user_args));
- memset (args, 0, sizeof (struct user_args));
-
- args->next = user_args;
- user_args = args;
-
- old_chain = make_cleanup ((make_cleanup_func) arg_cleanup, 0);
-
- if (p == NULL)
- return old_chain;
-
- while (*p)
- {
- char *start_arg;
- int squote = 0;
- int dquote = 0;
- int bsquote = 0;
-
- if (arg_count >= MAXUSERARGS)
- {
- error ("user defined function may only have %d arguments.\n",
- MAXUSERARGS);
- return old_chain;
- }
-
- /* Strip whitespace. */
- while (*p == ' ' || *p == '\t')
- p++;
-
- /* P now points to an argument. */
- start_arg = p;
- user_args->a[arg_count].arg = p;
-
- /* Get to the end of this argument. */
- while (*p)
- {
- if (((*p == ' ' || *p == '\t')) && !squote && !dquote && !bsquote)
- break;
- else
- {
- if (bsquote)
- bsquote = 0;
- else if (*p == '\\')
- bsquote = 1;
- else if (squote)
- {
- if (*p == '\'')
- squote = 0;
- }
- else if (dquote)
- {
- if (*p == '"')
- dquote = 0;
- }
- else
- {
- if (*p == '\'')
- squote = 1;
- else if (*p == '"')
- dquote = 1;
- }
- p++;
- }
+ printf_unfiltered ("Command execution time: %ld.%06ld\n",
+ cmd_time / 1000000, cmd_time % 1000000);
}
- user_args->a[arg_count].len = p - start_arg;
- arg_count++;
- user_args->count++;
- }
- return old_chain;
-}
-
-/* Given character string P, return a point to the first argument ($arg),
- or NULL if P contains no arguments. */
-
-static char *
-locate_arg (p)
- char *p;
-{
- while ((p = strchr (p, '$')))
- {
- if (strncmp (p, "$arg", 4) == 0 && isdigit (p[4]))
- return p;
- p++;
- }
- return NULL;
-}
-
-/* Insert the user defined arguments stored in user_arg into the $arg
- arguments found in line, with the updated copy being placed into nline. */
-
-static char *
-insert_args (line)
- char *line;
-{
- char *p, *save_line, *new_line;
- unsigned len, i;
-
- /* First we need to know how much memory to allocate for the new line. */
- save_line = line;
- len = 0;
- while ((p = locate_arg (line)))
- {
- len += p - line;
- i = p[4] - '0';
-
- if (i >= user_args->count)
+ if (display_space)
{
- error ("Missing argument %d in user function.\n", i);
- return NULL;
- }
- len += user_args->a[i].len;
- line = p + 5;
- }
-
- /* Don't forget the tail. */
- len += strlen (line);
-
- /* Allocate space for the new line and fill it in. */
- new_line = (char *) xmalloc (len + 1);
- if (new_line == NULL)
- return NULL;
-
- /* Restore pointer to beginning of old line. */
- line = save_line;
-
- /* Save pointer to beginning of new line. */
- save_line = new_line;
-
- while ((p = locate_arg (line)))
- {
- int i, len;
-
- memcpy (new_line, line, p - line);
- new_line += p - line;
- i = p[4] - '0';
+#ifdef HAVE_SBRK
+ extern char **environ;
+ char *lim = (char *) sbrk (0);
+ long space_now = lim - (char *) &environ;
+ long space_diff = space_now - space_at_cmd_start;
- len = user_args->a[i].len;
- if (len)
- {
- memcpy (new_line, user_args->a[i].arg, len);
- new_line += len;
+ printf_unfiltered ("Space used: %ld (%c%ld for this command)\n",
+ space_now,
+ (space_diff >= 0 ? '+' : '-'),
+ space_diff);
+#endif
}
- line = p + 5;
}
- /* Don't forget the tail. */
- strcpy (new_line, line);
-
- /* Return a pointer to the beginning of the new line. */
- return save_line;
}
+/* Read commands from `instream' and execute them until end of file or
+ error reading instream. This command loop doesnt care about any
+ such things as displaying time and space usage. If the user asks
+ for those, they won't work. */
void
-execute_user_command (c, args)
- struct cmd_list_element *c;
- char *args;
+simplified_command_loop (char *(*read_input_func) (char *),
+ void (*execute_command_func) (char *, int))
{
- register struct command_line *cmdlines;
struct cleanup *old_chain;
- enum command_control_type ret;
-
- old_chain = setup_user_args (args);
-
- cmdlines = c->user_commands;
- if (cmdlines == 0)
- /* Null command */
- return;
-
- /* Set the instream to 0, indicating execution of a
- user-defined function. */
- old_chain = make_cleanup ((make_cleanup_func) source_cleanup, instream);
- instream = (FILE *) 0;
- while (cmdlines)
- {
- ret = execute_control_command (cmdlines);
- if (ret != simple_control && ret != break_control)
- {
- warning ("Error in control structure.\n");
- break;
- }
- cmdlines = cmdlines->next;
- }
- do_cleanups (old_chain);
-}
-
-/* Execute the line P as a command.
- Pass FROM_TTY as second argument to the defining function. */
-
-void
-execute_command (p, from_tty)
- char *p;
- int from_tty;
-{
- register struct cmd_list_element *c;
- register enum language flang;
- static int warned = 0;
- char *line;
- /* FIXME: These should really be in an appropriate header file */
- extern void serial_log_command PARAMS ((const char *));
-
- free_all_values ();
-
- /* Force cleanup of any alloca areas if using C alloca instead of
- a builtin alloca. */
- alloca (0);
-
- /* This can happen when command_line_input hits end of file. */
- if (p == NULL)
- return;
-
- serial_log_command (p);
+ char *command;
+ int stdin_is_tty = ISATTY (stdin);
- while (*p == ' ' || *p == '\t')
- p++;
- if (*p)
+ while (instream && !feof (instream))
{
- char *arg;
- line = p;
-
- c = lookup_cmd (&p, cmdlist, "", 0, 1);
-
- /* If the target is running, we allow only a limited set of
- commands. */
- if (event_loop_p && target_can_async_p () && target_executing)
- if (!strcmp (c->name, "help")
- && !strcmp (c->name, "pwd")
- && !strcmp (c->name, "show")
- && !strcmp (c->name, "stop"))
- error ("Cannot execute this command while the target is running.");
-
- /* Pass null arg rather than an empty one. */
- arg = *p ? p : 0;
-
- /* Clear off trailing whitespace, except for set and complete command. */
- if (arg && c->type != set_cmd && c->function.cfunc != complete_command)
- {
- p = arg + strlen (arg) - 1;
- while (p >= arg && (*p == ' ' || *p == '\t'))
- p--;
- *(p + 1) = '\0';
- }
-
- /* If this command has been hooked, run the hook first. */
- if (c->hook)
- execute_user_command (c->hook, (char *) 0);
+ quit_flag = 0;
+ if (instream == stdin && stdin_is_tty)
+ reinitialize_more_filter ();
+ old_chain = make_cleanup (null_cleanup, 0);
- if (c->flags & DEPRECATED_WARN_USER)
- deprecated_cmd_warning (&line);
+ /* Get a command-line. */
+ command = (*read_input_func) (instream == stdin ?
+ get_prompt () : (char *) NULL);
- if (c->class == class_user)
- execute_user_command (c, arg);
- else if (c->type == set_cmd || c->type == show_cmd)
- do_setshow_command (arg, from_tty & caution, c);
- else if (c->function.cfunc == NO_FUNCTION)
- error ("That is not a command, just a help topic.");
- else if (call_command_hook)
- call_command_hook (c, arg, from_tty & caution);
- else
- (*c->function.cfunc) (arg, from_tty & caution);
- }
+ if (command == 0)
+ return;
- /* Tell the user if the language has changed (except first time). */
- if (current_language != expected_language)
- {
- if (language_mode == language_mode_auto)
- {
- language_info (1); /* Print what changed. */
- }
- warned = 0;
- }
+ (*execute_command_func) (command, instream == stdin);
- /* Warn the user if the working language does not match the
- language of the current frame. Only warn the user if we are
- actually running the program, i.e. there is a stack. */
- /* FIXME: This should be cacheing the frame and only running when
- the frame changes. */
+ /* Do any commands attached to breakpoint we stopped at. */
+ bpstat_do_actions (&stop_bpstat);
- if (target_has_stack)
- {
- flang = get_frame_language ();
- if (!warned
- && flang != language_unknown
- && flang != current_language->la_language)
- {
- printf_filtered ("%s\n", lang_frame_mismatch_warn);
- warned = 1;
- }
+ do_cleanups (old_chain);
}
}
-
-/* ARGSUSED */
-/* NOTE 1999-04-29: This function will be static again, once we modify
- gdb to use the event loop as the default command loop and we merge
- event-top.c into this file, top.c */
-/* static */ void
-command_loop_marker (foo)
- int foo;
-{
-}
-
-/* Read commands from `instream' and execute them
- until end of file or error reading instream. */
+\f
+/* Commands call this if they do not want to be repeated by null lines. */
void
-command_loop ()
+dont_repeat (void)
{
- struct cleanup *old_chain;
- char *command;
- int stdin_is_tty = ISATTY (stdin);
- long time_at_cmd_start;
-#ifdef HAVE_SBRK
- long space_at_cmd_start = 0;
-#endif
- extern int display_time;
- extern int display_space;
-
- while (instream && !feof (instream))
- {
-#if defined(TUI)
- extern int insert_mode;
-#endif
- if (window_hook && instream == stdin)
- (*window_hook) (instream, get_prompt ());
-
- quit_flag = 0;
- if (instream == stdin && stdin_is_tty)
- reinitialize_more_filter ();
- old_chain = make_cleanup ((make_cleanup_func) command_loop_marker, 0);
-
-#if defined(TUI)
- /* A bit of paranoia: I want to make sure the "insert_mode" global
- * is clear except when it is being used for command-line editing
- * (see tuiIO.c, utils.c); otherwise normal output will
- * get messed up in the TUI. So clear it before/after
- * the command-line-input call. - RT
- */
- insert_mode = 0;
-#endif
- /* Get a command-line. This calls the readline package. */
- command = command_line_input (instream == stdin ?
- get_prompt () : (char *) NULL,
- instream == stdin, "prompt");
-#if defined(TUI)
- insert_mode = 0;
-#endif
- if (command == 0)
- return;
-
- time_at_cmd_start = get_run_time ();
-
- if (display_space)
- {
-#ifdef HAVE_SBRK
- extern char **environ;
- char *lim = (char *) sbrk (0);
-
- space_at_cmd_start = (long) (lim - (char *) &environ);
-#endif
- }
-
- execute_command (command, instream == stdin);
- /* Do any commands attached to breakpoint we stopped at. */
- bpstat_do_actions (&stop_bpstat);
- do_cleanups (old_chain);
-
- if (display_time)
- {
- long cmd_time = get_run_time () - time_at_cmd_start;
-
- printf_unfiltered ("Command execution time: %ld.%06ld\n",
- cmd_time / 1000000, cmd_time % 1000000);
- }
-
- if (display_space)
- {
-#ifdef HAVE_SBRK
- extern char **environ;
- char *lim = (char *) sbrk (0);
- long space_now = lim - (char *) &environ;
- long space_diff = space_now - space_at_cmd_start;
-
- printf_unfiltered ("Space used: %ld (%c%ld for this command)\n",
- space_now,
- (space_diff >= 0 ? '+' : '-'),
- space_diff);
-#endif
- }
- }
-}
-
-/* Read commands from `instream' and execute them until end of file or
- error reading instream. This command loop doesnt care about any
- such things as displaying time and space usage. If the user asks
- for those, they won't work. */
-void
-simplified_command_loop (read_input_func, execute_command_func)
- char *(*read_input_func) (char *);
- void (*execute_command_func) (char *, int);
-{
- struct cleanup *old_chain;
- char *command;
- int stdin_is_tty = ISATTY (stdin);
-
- while (instream && !feof (instream))
- {
- quit_flag = 0;
- if (instream == stdin && stdin_is_tty)
- reinitialize_more_filter ();
- old_chain = make_cleanup ((make_cleanup_func) command_loop_marker, 0);
-
- /* Get a command-line. */
- command = (*read_input_func) (instream == stdin ?
- get_prompt () : (char *) NULL);
-
- if (command == 0)
- return;
-
- (*execute_command_func) (command, instream == stdin);
-
- /* Do any commands attached to breakpoint we stopped at. */
- bpstat_do_actions (&stop_bpstat);
-
- do_cleanups (old_chain);
- }
-}
-\f
-/* Commands call this if they do not want to be repeated by null lines. */
-
-void
-dont_repeat ()
-{
- if (server_command)
- return;
+ if (server_command)
+ return;
/* If we aren't reading from standard input, we are saving the last
thing read from stdin in line and don't want to delete it. Null lines
won't repeat here in any case. */
if (instream == stdin)
- *line = 0;
-}
-\f
-/* Read a line from the stream "instream" without command line editing.
-
- It prints PROMPT_ARG once at the start.
- Action is compatible with "readline", e.g. space for the result is
- malloc'd and should be freed by the caller.
-
- A NULL return means end of file. */
-char *
-gdb_readline (prompt_arg)
- char *prompt_arg;
-{
- int c;
- char *result;
- int input_index = 0;
- int result_size = 80;
-
- if (prompt_arg)
- {
- /* Don't use a _filtered function here. It causes the assumed
- character position to be off, since the newline we read from
- the user is not accounted for. */
- fputs_unfiltered (prompt_arg, gdb_stdout);
-#ifdef MPW
- /* Move to a new line so the entered line doesn't have a prompt
- on the front of it. */
- fputs_unfiltered ("\n", gdb_stdout);
-#endif /* MPW */
- gdb_flush (gdb_stdout);
- }
-
- result = (char *) xmalloc (result_size);
-
- while (1)
- {
- /* Read from stdin if we are executing a user defined command.
- This is the right thing for prompt_for_continue, at least. */
- c = fgetc (instream ? instream : stdin);
-
- if (c == EOF)
- {
- if (input_index > 0)
- /* The last line does not end with a newline. Return it, and
- if we are called again fgetc will still return EOF and
- we'll return NULL then. */
- break;
- free (result);
- return NULL;
- }
-
- if (c == '\n')
-#ifndef CRLF_SOURCE_FILES
- break;
-#else
- {
- if (input_index > 0 && result[input_index - 1] == '\r')
- input_index--;
- break;
- }
-#endif
-
- result[input_index++] = c;
- while (input_index >= result_size)
- {
- result_size *= 2;
- result = (char *) xrealloc (result, result_size);
- }
- }
-
- result[input_index++] = '\0';
- return result;
-}
-
-/* Variables which control command line editing and history
- substitution. These variables are given default values at the end
- of this file. */
-static int command_editing_p;
-/* NOTE 1999-04-29: This variable will be static again, once we modify
- gdb to use the event loop as the default command loop and we merge
- event-top.c into this file, top.c */
-/* static */ int history_expansion_p;
-static int write_history_p;
-static int history_size;
-static char *history_filename;
-
-/* readline uses the word breaks for two things:
- (1) In figuring out where to point the TEXT parameter to the
- rl_completion_entry_function. Since we don't use TEXT for much,
- it doesn't matter a lot what the word breaks are for this purpose, but
- it does affect how much stuff M-? lists.
- (2) If one of the matches contains a word break character, readline
- will quote it. That's why we switch between
- gdb_completer_word_break_characters and
- gdb_completer_command_word_break_characters. I'm not sure when
- we need this behavior (perhaps for funky characters in C++ symbols?). */
-
-/* Variables which are necessary for fancy command line editing. */
-char *gdb_completer_word_break_characters =
-" \t\n!@#$%^&*()+=|~`}{[]\"';:?/>.<,-";
-
-/* When completing on command names, we remove '-' from the list of
- word break characters, since we use it in command names. If the
- readline library sees one in any of the current completion strings,
- it thinks that the string needs to be quoted and automatically supplies
- a leading quote. */
-char *gdb_completer_command_word_break_characters =
-" \t\n!@#$%^&*()+=|~`}{[]\"';:?/>.<,";
-
-/* When completing on file names, we remove from the list of word
- break characters any characters that are commonly used in file
- names, such as '-', '+', '~', etc. Otherwise, readline displays
- incorrect completion candidates. */
-char *gdb_completer_file_name_break_characters = " \t\n*|\"';:?/><";
-
-/* Characters that can be used to quote completion strings. Note that we
- can't include '"' because the gdb C parser treats such quoted sequences
- as strings. */
-char *gdb_completer_quote_characters =
-"'";
-
-/* Functions that are used as part of the fancy command line editing. */
-
-/* This can be used for functions which don't want to complete on symbols
- but don't want to complete on anything else either. */
-/* ARGSUSED */
-char **
-noop_completer (text, prefix)
- char *text;
- char *prefix;
-{
- return NULL;
-}
-
-/* Complete on filenames. */
-char **
-filename_completer (text, word)
- char *text;
- char *word;
-{
- /* From readline. */
- extern char *filename_completion_function PARAMS ((char *, int));
- int subsequent_name;
- char **return_val;
- int return_val_used;
- int return_val_alloced;
-
- return_val_used = 0;
- /* Small for testing. */
- return_val_alloced = 1;
- return_val = (char **) xmalloc (return_val_alloced * sizeof (char *));
-
- subsequent_name = 0;
- while (1)
- {
- char *p;
- p = filename_completion_function (text, subsequent_name);
- if (return_val_used >= return_val_alloced)
- {
- return_val_alloced *= 2;
- return_val =
- (char **) xrealloc (return_val,
- return_val_alloced * sizeof (char *));
- }
- if (p == NULL)
- {
- return_val[return_val_used++] = p;
- break;
- }
- /* We need to set subsequent_name to a non-zero value before the
- continue line below, because otherwise, if the first file seen
- by GDB is a backup file whose name ends in a `~', we will loop
- indefinitely. */
- subsequent_name = 1;
- /* Like emacs, don't complete on old versions. Especially useful
- in the "source" command. */
- if (p[strlen (p) - 1] == '~')
- continue;
-
- {
- char *q;
- if (word == text)
- /* Return exactly p. */
- return_val[return_val_used++] = p;
- else if (word > text)
- {
- /* Return some portion of p. */
- q = xmalloc (strlen (p) + 5);
- strcpy (q, p + (word - text));
- return_val[return_val_used++] = q;
- free (p);
- }
- else
- {
- /* Return some of TEXT plus p. */
- q = xmalloc (strlen (p) + (text - word) + 5);
- strncpy (q, word, text - word);
- q[text - word] = '\0';
- strcat (q, p);
- return_val[return_val_used++] = q;
- free (p);
- }
- }
- }
-#if 0
- /* There is no way to do this just long enough to affect quote inserting
- without also affecting the next completion. This should be fixed in
- readline. FIXME. */
- /* Insure that readline does the right thing
- with respect to inserting quotes. */
- rl_completer_word_break_characters = "";
-#endif
- return return_val;
-}
-
-/* Here are some useful test cases for completion. FIXME: These should
- be put in the test suite. They should be tested with both M-? and TAB.
-
- "show output-" "radix"
- "show output" "-radix"
- "p" ambiguous (commands starting with p--path, print, printf, etc.)
- "p " ambiguous (all symbols)
- "info t foo" no completions
- "info t " no completions
- "info t" ambiguous ("info target", "info terminal", etc.)
- "info ajksdlfk" no completions
- "info ajksdlfk " no completions
- "info" " "
- "info " ambiguous (all info commands)
- "p \"a" no completions (string constant)
- "p 'a" ambiguous (all symbols starting with a)
- "p b-a" ambiguous (all symbols starting with a)
- "p b-" ambiguous (all symbols)
- "file Make" "file" (word break hard to screw up here)
- "file ../gdb.stabs/we" "ird" (needs to not break word at slash)
- */
-
-/* Generate completions one by one for the completer. Each time we are
- called return another potential completion to the caller.
- line_completion just completes on commands or passes the buck to the
- command's completer function, the stuff specific to symbol completion
- is in make_symbol_completion_list.
-
- TEXT is the caller's idea of the "word" we are looking at.
-
- MATCHES is the number of matches that have currently been collected from
- calling this completion function. When zero, then we need to initialize,
- otherwise the initialization has already taken place and we can just
- return the next potential completion string.
-
- LINE_BUFFER is available to be looked at; it contains the entire text
- of the line. POINT is the offset in that line of the cursor. You
- should pretend that the line ends at POINT.
-
- Returns NULL if there are no more completions, else a pointer to a string
- which is a possible completion, it is the caller's responsibility to
- free the string. */
-
-static char *
-line_completion_function (text, matches, line_buffer, point)
- char *text;
- int matches;
- char *line_buffer;
- int point;
-{
- static char **list = (char **) NULL; /* Cache of completions */
- static int index; /* Next cached completion */
- char *output = NULL;
- char *tmp_command, *p;
- /* Pointer within tmp_command which corresponds to text. */
- char *word;
- struct cmd_list_element *c, *result_list;
-
- if (matches == 0)
- {
- /* The caller is beginning to accumulate a new set of completions, so
- we need to find all of them now, and cache them for returning one at
- a time on future calls. */
-
- if (list)
- {
- /* Free the storage used by LIST, but not by the strings inside.
- This is because rl_complete_internal () frees the strings. */
- free ((PTR) list);
- }
- list = 0;
- index = 0;
-
- /* Choose the default set of word break characters to break completions.
- If we later find out that we are doing completions on command strings
- (as opposed to strings supplied by the individual command completer
- functions, which can be any string) then we will switch to the
- special word break set for command strings, which leaves out the
- '-' character used in some commands. */
-
- rl_completer_word_break_characters =
- gdb_completer_word_break_characters;
-
- /* Decide whether to complete on a list of gdb commands or on symbols. */
- tmp_command = (char *) alloca (point + 1);
- p = tmp_command;
-
- strncpy (tmp_command, line_buffer, point);
- tmp_command[point] = '\0';
- /* Since text always contains some number of characters leading up
- to point, we can find the equivalent position in tmp_command
- by subtracting that many characters from the end of tmp_command. */
- word = tmp_command + point - strlen (text);
-
- if (point == 0)
- {
- /* An empty line we want to consider ambiguous; that is, it
- could be any command. */
- c = (struct cmd_list_element *) -1;
- result_list = 0;
- }
- else
- {
- c = lookup_cmd_1 (&p, cmdlist, &result_list, 1);
- }
-
- /* Move p up to the next interesting thing. */
- while (*p == ' ' || *p == '\t')
- {
- p++;
- }
-
- if (!c)
- {
- /* It is an unrecognized command. So there are no
- possible completions. */
- list = NULL;
- }
- else if (c == (struct cmd_list_element *) -1)
- {
- char *q;
-
- /* lookup_cmd_1 advances p up to the first ambiguous thing, but
- doesn't advance over that thing itself. Do so now. */
- q = p;
- while (*q && (isalnum (*q) || *q == '-' || *q == '_'))
- ++q;
- if (q != tmp_command + point)
- {
- /* There is something beyond the ambiguous
- command, so there are no possible completions. For
- example, "info t " or "info t foo" does not complete
- to anything, because "info t" can be "info target" or
- "info terminal". */
- list = NULL;
- }
- else
- {
- /* We're trying to complete on the command which was ambiguous.
- This we can deal with. */
- if (result_list)
- {
- list = complete_on_cmdlist (*result_list->prefixlist, p,
- word);
- }
- else
- {
- list = complete_on_cmdlist (cmdlist, p, word);
- }
- /* Insure that readline does the right thing with respect to
- inserting quotes. */
- rl_completer_word_break_characters =
- gdb_completer_command_word_break_characters;
- }
- }
- else
- {
- /* We've recognized a full command. */
-
- if (p == tmp_command + point)
- {
- /* There is no non-whitespace in the line beyond the command. */
-
- if (p[-1] == ' ' || p[-1] == '\t')
- {
- /* The command is followed by whitespace; we need to complete
- on whatever comes after command. */
- if (c->prefixlist)
- {
- /* It is a prefix command; what comes after it is
- a subcommand (e.g. "info "). */
- list = complete_on_cmdlist (*c->prefixlist, p, word);
-
- /* Insure that readline does the right thing
- with respect to inserting quotes. */
- rl_completer_word_break_characters =
- gdb_completer_command_word_break_characters;
- }
- else if (c->enums)
- {
- list = complete_on_enum (c->enums, p, word);
- rl_completer_word_break_characters =
- gdb_completer_command_word_break_characters;
- }
- else
- {
- /* It is a normal command; what comes after it is
- completed by the command's completer function. */
- list = (*c->completer) (p, word);
- if (c->completer == filename_completer)
- rl_completer_word_break_characters =
- gdb_completer_file_name_break_characters;
- }
- }
- else
- {
- /* The command is not followed by whitespace; we need to
- complete on the command itself. e.g. "p" which is a
- command itself but also can complete to "print", "ptype"
- etc. */
- char *q;
-
- /* Find the command we are completing on. */
- q = p;
- while (q > tmp_command)
- {
- if (isalnum (q[-1]) || q[-1] == '-' || q[-1] == '_')
- --q;
- else
- break;
- }
-
- list = complete_on_cmdlist (result_list, q, word);
-
- /* Insure that readline does the right thing
- with respect to inserting quotes. */
- rl_completer_word_break_characters =
- gdb_completer_command_word_break_characters;
- }
- }
- else
- {
- /* There is non-whitespace beyond the command. */
-
- if (c->prefixlist && !c->allow_unknown)
- {
- /* It is an unrecognized subcommand of a prefix command,
- e.g. "info adsfkdj". */
- list = NULL;
- }
- else if (c->enums)
- {
- list = complete_on_enum (c->enums, p, word);
- }
- else
- {
- /* It is a normal command. */
- list = (*c->completer) (p, word);
- if (c->completer == filename_completer)
- rl_completer_word_break_characters =
- gdb_completer_file_name_break_characters;
- }
- }
- }
- }
-
- /* If we found a list of potential completions during initialization then
- dole them out one at a time. The vector of completions is NULL
- terminated, so after returning the last one, return NULL (and continue
- to do so) each time we are called after that, until a new list is
- available. */
-
- if (list)
- {
- output = list[index];
- if (output)
- {
- index++;
- }
- }
-
-#if 0
- /* Can't do this because readline hasn't yet checked the word breaks
- for figuring out whether to insert a quote. */
- if (output == NULL)
- /* Make sure the word break characters are set back to normal for the
- next time that readline tries to complete something. */
- rl_completer_word_break_characters =
- gdb_completer_word_break_characters;
-#endif
-
- return (output);
-}
-
-/* Line completion interface function for readline. */
-
-static char *
-readline_line_completion_function (text, matches)
- char *text;
- int matches;
-{
- return line_completion_function (text, matches, rl_line_buffer, rl_point);
-}
-
-/* Skip over a possibly quoted word (as defined by the quote characters
- and word break characters the completer uses). Returns pointer to the
- location after the "word". */
-
-char *
-skip_quoted (str)
- char *str;
-{
- char quote_char = '\0';
- char *scan;
-
- for (scan = str; *scan != '\0'; scan++)
- {
- if (quote_char != '\0')
- {
- /* Ignore everything until the matching close quote char */
- if (*scan == quote_char)
- {
- /* Found matching close quote. */
- scan++;
- break;
- }
- }
- else if (strchr (gdb_completer_quote_characters, *scan))
- {
- /* Found start of a quoted string. */
- quote_char = *scan;
- }
- else if (strchr (gdb_completer_word_break_characters, *scan))
- {
- break;
- }
- }
- return (scan);
-}
-\f
-
-#ifdef STOP_SIGNAL
-static void
-stop_sig (signo)
- int signo;
-{
-#if STOP_SIGNAL == SIGTSTP
- signal (SIGTSTP, SIG_DFL);
- sigsetmask (0);
- kill (getpid (), SIGTSTP);
- signal (SIGTSTP, stop_sig);
-#else
- signal (STOP_SIGNAL, stop_sig);
-#endif
- printf_unfiltered ("%s", get_prompt ());
- gdb_flush (gdb_stdout);
-
- /* Forget about any previous command -- null line now will do nothing. */
- dont_repeat ();
-}
-#endif /* STOP_SIGNAL */
-
-/* Initialize signal handlers. */
-static void
-do_nothing (signo)
- int signo;
-{
- /* Under System V the default disposition of a signal is reinstated after
- the signal is caught and delivered to an application process. On such
- systems one must restore the replacement signal handler if one wishes
- to continue handling the signal in one's program. On BSD systems this
- is not needed but it is harmless, and it simplifies the code to just do
- it unconditionally. */
- signal (signo, do_nothing);
-}
-
-static void
-init_signals ()
-{
- signal (SIGINT, request_quit);
-
- /* If SIGTRAP was set to SIG_IGN, then the SIG_IGN will get passed
- to the inferior and breakpoints will be ignored. */
-#ifdef SIGTRAP
- signal (SIGTRAP, SIG_DFL);
-#endif
-
- /* If we initialize SIGQUIT to SIG_IGN, then the SIG_IGN will get
- passed to the inferior, which we don't want. It would be
- possible to do a "signal (SIGQUIT, SIG_DFL)" after we fork, but
- on BSD4.3 systems using vfork, that can affect the
- GDB process as well as the inferior (the signal handling tables
- might be in memory, shared between the two). Since we establish
- a handler for SIGQUIT, when we call exec it will set the signal
- to SIG_DFL for us. */
- signal (SIGQUIT, do_nothing);
-#ifdef SIGHUP
- if (signal (SIGHUP, do_nothing) != SIG_IGN)
- signal (SIGHUP, disconnect);
-#endif
- signal (SIGFPE, float_handler);
-
-#if defined(SIGWINCH) && defined(SIGWINCH_HANDLER)
- signal (SIGWINCH, SIGWINCH_HANDLER);
-#endif
-}
-\f
-/* Read one line from the command input stream `instream'
- into the local static buffer `linebuffer' (whose current length
- is `linelength').
- The buffer is made bigger as necessary.
- Returns the address of the start of the line.
-
- NULL is returned for end of file.
-
- *If* the instream == stdin & stdin is a terminal, the line read
- is copied into the file line saver (global var char *line,
- length linesize) so that it can be duplicated.
-
- This routine either uses fancy command line editing or
- simple input as the user has requested. */
-
-char *
-command_line_input (prompt_arg, repeat, annotation_suffix)
- char *prompt_arg;
- int repeat;
- char *annotation_suffix;
-{
- static char *linebuffer = 0;
- static unsigned linelength = 0;
- register char *p;
- char *p1;
- char *rl;
- char *local_prompt = prompt_arg;
- char *nline;
- char got_eof = 0;
-
- /* The annotation suffix must be non-NULL. */
- if (annotation_suffix == NULL)
- annotation_suffix = "";
-
- if (annotation_level > 1 && instream == stdin)
- {
- local_prompt = alloca ((prompt_arg == NULL ? 0 : strlen (prompt_arg))
- + strlen (annotation_suffix) + 40);
- if (prompt_arg == NULL)
- local_prompt[0] = '\0';
- else
- strcpy (local_prompt, prompt_arg);
- strcat (local_prompt, "\n\032\032");
- strcat (local_prompt, annotation_suffix);
- strcat (local_prompt, "\n");
- }
-
- if (linebuffer == 0)
- {
- linelength = 80;
- linebuffer = (char *) xmalloc (linelength);
- }
-
- p = linebuffer;
-
- /* Control-C quits instantly if typed while in this loop
- since it should not wait until the user types a newline. */
- immediate_quit++;
-#ifdef STOP_SIGNAL
- if (job_control)
- {
- if (event_loop_p)
- signal (STOP_SIGNAL, handle_stop_sig);
- else
- signal (STOP_SIGNAL, stop_sig);
- }
-#endif
-
- while (1)
- {
- /* Make sure that all output has been output. Some machines may let
- you get away with leaving out some of the gdb_flush, but not all. */
- wrap_here ("");
- gdb_flush (gdb_stdout);
- gdb_flush (gdb_stderr);
-
- if (source_file_name != NULL)
- {
- ++source_line_number;
- sprintf (source_error,
- "%s%s:%d: Error in sourced command file:\n",
- source_pre_error,
- source_file_name,
- source_line_number);
- error_pre_print = source_error;
- }
-
- if (annotation_level > 1 && instream == stdin)
- {
- printf_unfiltered ("\n\032\032pre-");
- printf_unfiltered (annotation_suffix);
- printf_unfiltered ("\n");
- }
-
- /* Don't use fancy stuff if not talking to stdin. */
- if (readline_hook && instream == NULL)
- {
- rl = (*readline_hook) (local_prompt);
- }
- else if (command_editing_p && instream == stdin && ISATTY (instream))
- {
- rl = readline (local_prompt);
- }
- else
- {
- rl = gdb_readline (local_prompt);
- }
-
- if (annotation_level > 1 && instream == stdin)
- {
- printf_unfiltered ("\n\032\032post-");
- printf_unfiltered (annotation_suffix);
- printf_unfiltered ("\n");
- }
-
- if (!rl || rl == (char *) EOF)
- {
- got_eof = 1;
- break;
- }
- if (strlen (rl) + 1 + (p - linebuffer) > linelength)
- {
- linelength = strlen (rl) + 1 + (p - linebuffer);
- nline = (char *) xrealloc (linebuffer, linelength);
- p += nline - linebuffer;
- linebuffer = nline;
- }
- p1 = rl;
- /* Copy line. Don't copy null at end. (Leaves line alone
- if this was just a newline) */
- while (*p1)
- *p++ = *p1++;
-
- free (rl); /* Allocated in readline. */
-
- if (p == linebuffer || *(p - 1) != '\\')
- break;
-
- p--; /* Put on top of '\'. */
- local_prompt = (char *) 0;
- }
-
-#ifdef STOP_SIGNAL
- if (job_control)
- signal (STOP_SIGNAL, SIG_DFL);
-#endif
- immediate_quit--;
-
- if (got_eof)
- return NULL;
-
-#define SERVER_COMMAND_LENGTH 7
- server_command =
- (p - linebuffer > SERVER_COMMAND_LENGTH)
- && STREQN (linebuffer, "server ", SERVER_COMMAND_LENGTH);
- if (server_command)
- {
- /* Note that we don't set `line'. Between this and the check in
- dont_repeat, this insures that repeating will still do the
- right thing. */
- *p = '\0';
- return linebuffer + SERVER_COMMAND_LENGTH;
- }
-
- /* Do history expansion if that is wished. */
- if (history_expansion_p && instream == stdin
- && ISATTY (instream))
- {
- char *history_value;
- int expanded;
-
- *p = '\0'; /* Insert null now. */
- expanded = history_expand (linebuffer, &history_value);
- if (expanded)
- {
- /* Print the changes. */
- printf_unfiltered ("%s\n", history_value);
-
- /* If there was an error, call this function again. */
- if (expanded < 0)
- {
- free (history_value);
- return command_line_input (prompt_arg, repeat, annotation_suffix);
- }
- if (strlen (history_value) > linelength)
- {
- linelength = strlen (history_value) + 1;
- linebuffer = (char *) xrealloc (linebuffer, linelength);
- }
- strcpy (linebuffer, history_value);
- p = linebuffer + strlen (linebuffer);
- free (history_value);
- }
- }
-
- /* If we just got an empty line, and that is supposed
- to repeat the previous command, return the value in the
- global buffer. */
- if (repeat && p == linebuffer)
- return line;
- for (p1 = linebuffer; *p1 == ' ' || *p1 == '\t'; p1++);
- if (repeat && !*p1)
- return line;
-
- *p = 0;
-
- /* Add line to history if appropriate. */
- if (instream == stdin
- && ISATTY (stdin) && *linebuffer)
- add_history (linebuffer);
-
- /* Note: lines consisting solely of comments are added to the command
- history. This is useful when you type a command, and then
- realize you don't want to execute it quite yet. You can comment
- out the command and then later fetch it from the value history
- and remove the '#'. The kill ring is probably better, but some
- people are in the habit of commenting things out. */
- if (*p1 == '#')
- *p1 = '\0'; /* Found a comment. */
-
- /* Save into global buffer if appropriate. */
- if (repeat)
- {
- if (linelength > linesize)
- {
- line = xrealloc (line, linelength);
- linesize = linelength;
- }
- strcpy (line, linebuffer);
- return line;
- }
-
- return linebuffer;
-}
-\f
-
-/* Expand the body_list of COMMAND so that it can hold NEW_LENGTH
- code bodies. This is typically used when we encounter an "else"
- clause for an "if" command. */
-
-static void
-realloc_body_list (command, new_length)
- struct command_line *command;
- int new_length;
-{
- int n;
- struct command_line **body_list;
-
- n = command->body_count;
-
- /* Nothing to do? */
- if (new_length <= n)
- return;
-
- body_list = (struct command_line **)
- xmalloc (sizeof (struct command_line *) * new_length);
-
- memcpy (body_list, command->body_list, sizeof (struct command_line *) * n);
-
- free (command->body_list);
- command->body_list = body_list;
- command->body_count = new_length;
-}
-
-/* Read one line from the input stream. If the command is an "else" or
- "end", return such an indication to the caller. */
-
-static enum misc_command_type
-read_next_line (command)
- struct command_line **command;
-{
- char *p, *p1, *prompt_ptr, control_prompt[256];
- int i = 0;
-
- if (control_level >= 254)
- error ("Control nesting too deep!\n");
-
- /* Set a prompt based on the nesting of the control commands. */
- if (instream == stdin || (instream == 0 && readline_hook != NULL))
- {
- for (i = 0; i < control_level; i++)
- control_prompt[i] = ' ';
- control_prompt[i] = '>';
- control_prompt[i + 1] = '\0';
- prompt_ptr = (char *) &control_prompt[0];
- }
- else
- prompt_ptr = NULL;
-
- p = command_line_input (prompt_ptr, instream == stdin, "commands");
-
- /* Not sure what to do here. */
- if (p == NULL)
- return end_command;
-
- /* Strip leading and trailing whitespace. */
- while (*p == ' ' || *p == '\t')
- p++;
-
- p1 = p + strlen (p);
- while (p1 != p && (p1[-1] == ' ' || p1[-1] == '\t'))
- p1--;
-
- /* Blanks and comments don't really do anything, but we need to
- distinguish them from else, end and other commands which can be
- executed. */
- if (p1 == p || p[0] == '#')
- return nop_command;
-
- /* Is this the end of a simple, while, or if control structure? */
- if (p1 - p == 3 && !strncmp (p, "end", 3))
- return end_command;
-
- /* Is the else clause of an if control structure? */
- if (p1 - p == 4 && !strncmp (p, "else", 4))
- return else_command;
-
- /* Check for while, if, break, continue, etc and build a new command
- line structure for them. */
- if (p1 - p > 5 && !strncmp (p, "while", 5))
- *command = build_command_line (while_control, p + 6);
- else if (p1 - p > 2 && !strncmp (p, "if", 2))
- *command = build_command_line (if_control, p + 3);
- else if (p1 - p == 10 && !strncmp (p, "loop_break", 10))
- {
- *command = (struct command_line *)
- xmalloc (sizeof (struct command_line));
- (*command)->next = NULL;
- (*command)->line = NULL;
- (*command)->control_type = break_control;
- (*command)->body_count = 0;
- (*command)->body_list = NULL;
- }
- else if (p1 - p == 13 && !strncmp (p, "loop_continue", 13))
- {
- *command = (struct command_line *)
- xmalloc (sizeof (struct command_line));
- (*command)->next = NULL;
- (*command)->line = NULL;
- (*command)->control_type = continue_control;
- (*command)->body_count = 0;
- (*command)->body_list = NULL;
- }
- else
- {
- /* A normal command. */
- *command = (struct command_line *)
- xmalloc (sizeof (struct command_line));
- (*command)->next = NULL;
- (*command)->line = savestring (p, p1 - p);
- (*command)->control_type = simple_control;
- (*command)->body_count = 0;
- (*command)->body_list = NULL;
- }
-
- /* Nothing special. */
- return ok_command;
-}
-
-/* Recursively read in the control structures and create a command_line
- structure from them.
-
- The parent_control parameter is the control structure in which the
- following commands are nested. */
-
-static enum command_control_type
-recurse_read_control_structure (current_cmd)
- struct command_line *current_cmd;
-{
- int current_body, i;
- enum misc_command_type val;
- enum command_control_type ret;
- struct command_line **body_ptr, *child_tail, *next;
-
- child_tail = NULL;
- current_body = 1;
-
- /* Sanity checks. */
- if (current_cmd->control_type == simple_control)
- {
- error ("Recursed on a simple control type\n");
- return invalid_control;
- }
-
- if (current_body > current_cmd->body_count)
- {
- error ("Allocated body is smaller than this command type needs\n");
- return invalid_control;
- }
-
- /* Read lines from the input stream and build control structures. */
- while (1)
- {
- dont_repeat ();
-
- next = NULL;
- val = read_next_line (&next);
-
- /* Just skip blanks and comments. */
- if (val == nop_command)
- continue;
-
- if (val == end_command)
- {
- if (current_cmd->control_type == while_control
- || current_cmd->control_type == if_control)
- {
- /* Success reading an entire control structure. */
- ret = simple_control;
- break;
- }
- else
- {
- ret = invalid_control;
- break;
- }
- }
-
- /* Not the end of a control structure. */
- if (val == else_command)
- {
- if (current_cmd->control_type == if_control
- && current_body == 1)
- {
- realloc_body_list (current_cmd, 2);
- current_body = 2;
- child_tail = NULL;
- continue;
- }
- else
- {
- ret = invalid_control;
- break;
- }
- }
-
- if (child_tail)
- {
- child_tail->next = next;
- }
- else
- {
- body_ptr = current_cmd->body_list;
- for (i = 1; i < current_body; i++)
- body_ptr++;
-
- *body_ptr = next;
-
- }
-
- child_tail = next;
-
- /* If the latest line is another control structure, then recurse
- on it. */
- if (next->control_type == while_control
- || next->control_type == if_control)
- {
- control_level++;
- ret = recurse_read_control_structure (next);
- control_level--;
-
- if (ret != simple_control)
- break;
- }
- }
-
- dont_repeat ();
-
- return ret;
+ *line = 0;
}
+\f
+/* Read a line from the stream "instream" without command line editing.
-/* Read lines from the input stream and accumulate them in a chain of
- struct command_line's, which is then returned. For input from a
- terminal, the special command "end" is used to mark the end of the
- input, and is not included in the returned chain of commands. */
-
-#define END_MESSAGE "End with a line saying just \"end\"."
+ It prints PROMPT_ARG once at the start.
+ Action is compatible with "readline", e.g. space for the result is
+ malloc'd and should be freed by the caller.
-struct command_line *
-read_command_lines (prompt_arg, from_tty)
- char *prompt_arg;
- int from_tty;
+ A NULL return means end of file. */
+char *
+gdb_readline (char *prompt_arg)
{
- struct command_line *head, *tail, *next;
- struct cleanup *old_chain;
- enum command_control_type ret;
- enum misc_command_type val;
+ int c;
+ char *result;
+ int input_index = 0;
+ int result_size = 80;
- control_level = 0;
- if (readline_begin_hook)
- {
- /* Note - intentional to merge messages with no newline */
- (*readline_begin_hook) ("%s %s\n", prompt_arg, END_MESSAGE);
- }
- else if (from_tty && input_from_terminal_p ())
+ if (prompt_arg)
{
- printf_unfiltered ("%s\n%s\n", prompt_arg, END_MESSAGE);
+ /* Don't use a _filtered function here. It causes the assumed
+ character position to be off, since the newline we read from
+ the user is not accounted for. */
+ fputs_unfiltered (prompt_arg, gdb_stdout);
+#ifdef MPW
+ /* Move to a new line so the entered line doesn't have a prompt
+ on the front of it. */
+ fputs_unfiltered ("\n", gdb_stdout);
+#endif /* MPW */
gdb_flush (gdb_stdout);
}
- head = tail = NULL;
- old_chain = NULL;
+ result = (char *) xmalloc (result_size);
while (1)
{
- val = read_next_line (&next);
-
- /* Ignore blank lines or comments. */
- if (val == nop_command)
- continue;
-
- if (val == end_command)
- {
- ret = simple_control;
- break;
- }
-
- if (val != ok_command)
- {
- ret = invalid_control;
- break;
- }
+ /* Read from stdin if we are executing a user defined command.
+ This is the right thing for prompt_for_continue, at least. */
+ c = fgetc (instream ? instream : stdin);
- if (next->control_type == while_control
- || next->control_type == if_control)
+ if (c == EOF)
{
- control_level++;
- ret = recurse_read_control_structure (next);
- control_level--;
-
- if (ret == invalid_control)
+ if (input_index > 0)
+ /* The last line does not end with a newline. Return it, and
+ if we are called again fgetc will still return EOF and
+ we'll return NULL then. */
break;
+ free (result);
+ return NULL;
}
- if (tail)
- {
- tail->next = next;
- }
- else
+ if (c == '\n')
+#ifndef CRLF_SOURCE_FILES
+ break;
+#else
{
- head = next;
- old_chain = make_cleanup ((make_cleanup_func) free_command_lines,
- &head);
+ if (input_index > 0 && result[input_index - 1] == '\r')
+ input_index--;
+ break;
}
- tail = next;
- }
-
- dont_repeat ();
+#endif
- if (head)
- {
- if (ret != invalid_control)
+ result[input_index++] = c;
+ while (input_index >= result_size)
{
- discard_cleanups (old_chain);
+ result_size *= 2;
+ result = (char *) xrealloc (result, result_size);
}
- else
- do_cleanups (old_chain);
}
- if (readline_end_hook)
- {
- (*readline_end_hook) ();
- }
- return (head);
+ result[input_index++] = '\0';
+ return result;
}
-/* Free a chain of struct command_line's. */
-
-void
-free_command_lines (lptr)
- struct command_line **lptr;
-{
- register struct command_line *l = *lptr;
- register struct command_line *next;
- struct command_line **blist;
- int i;
+/* Variables which control command line editing and history
+ substitution. These variables are given default values at the end
+ of this file. */
+static int command_editing_p;
+/* NOTE 1999-04-29: This variable will be static again, once we modify
+ gdb to use the event loop as the default command loop and we merge
+ event-top.c into this file, top.c */
+/* static */ int history_expansion_p;
+static int write_history_p;
+static int history_size;
+static char *history_filename;
- while (l)
- {
- if (l->body_count > 0)
- {
- blist = l->body_list;
- for (i = 0; i < l->body_count; i++, blist++)
- free_command_lines (blist);
- }
- next = l->next;
- free (l->line);
- free ((PTR) l);
- l = next;
- }
-}
-\f
-/* Add an element to the list of info subcommands. */
+/* Functions that are used as part of the fancy command line editing. */
-struct cmd_list_element *
-add_info (name, fun, doc)
- char *name;
- void (*fun) PARAMS ((char *, int));
- char *doc;
+/* This can be used for functions which don't want to complete on symbols
+ but don't want to complete on anything else either. */
+/* ARGSUSED */
+char **
+noop_completer (char *text, char *prefix)
{
- return add_cmd (name, no_class, fun, doc, &infolist);
+ return NULL;
}
-/* Add an alias to the list of info subcommands. */
+/* Line completion interface function for readline. */
-struct cmd_list_element *
-add_info_alias (name, oldname, abbrev_flag)
- char *name;
- char *oldname;
- int abbrev_flag;
+static char *
+readline_line_completion_function (char *text, int matches)
{
- return add_alias_cmd (name, oldname, 0, abbrev_flag, &infolist);
+ return line_completion_function (text, matches, rl_line_buffer, rl_point);
}
+\f
+#ifdef STOP_SIGNAL
+static void
+stop_sig (int signo)
+{
+#if STOP_SIGNAL == SIGTSTP
+ signal (SIGTSTP, SIG_DFL);
+ sigsetmask (0);
+ kill (getpid (), SIGTSTP);
+ signal (SIGTSTP, stop_sig);
+#else
+ signal (STOP_SIGNAL, stop_sig);
+#endif
+ printf_unfiltered ("%s", get_prompt ());
+ gdb_flush (gdb_stdout);
-/* The "info" command is defined as a prefix, with allow_unknown = 0.
- Therefore, its own definition is called only for "info" with no args. */
+ /* Forget about any previous command -- null line now will do nothing. */
+ dont_repeat ();
+}
+#endif /* STOP_SIGNAL */
-/* ARGSUSED */
+/* Initialize signal handlers. */
static void
-info_command (arg, from_tty)
- char *arg;
- int from_tty;
+do_nothing (int signo)
{
- printf_unfiltered ("\"info\" must be followed by the name of an info command.\n");
- help_list (infolist, "info ", -1, gdb_stdout);
+ /* Under System V the default disposition of a signal is reinstated after
+ the signal is caught and delivered to an application process. On such
+ systems one must restore the replacement signal handler if one wishes
+ to continue handling the signal in one's program. On BSD systems this
+ is not needed but it is harmless, and it simplifies the code to just do
+ it unconditionally. */
+ signal (signo, do_nothing);
}
-/* The "complete" command is used by Emacs to implement completion. */
-
-/* ARGSUSED */
static void
-complete_command (arg, from_tty)
- char *arg;
- int from_tty;
+init_signals (void)
{
- int i;
- int argpoint;
- char *completion;
-
- dont_repeat ();
-
- if (arg == NULL)
- arg = "";
- argpoint = strlen (arg);
+ signal (SIGINT, request_quit);
- for (completion = line_completion_function (arg, i = 0, arg, argpoint);
- completion;
- completion = line_completion_function (arg, ++i, arg, argpoint))
- {
- printf_unfiltered ("%s\n", completion);
- free (completion);
- }
-}
+ /* If SIGTRAP was set to SIG_IGN, then the SIG_IGN will get passed
+ to the inferior and breakpoints will be ignored. */
+#ifdef SIGTRAP
+ signal (SIGTRAP, SIG_DFL);
+#endif
-/* The "show" command with no arguments shows all the settings. */
+ /* If we initialize SIGQUIT to SIG_IGN, then the SIG_IGN will get
+ passed to the inferior, which we don't want. It would be
+ possible to do a "signal (SIGQUIT, SIG_DFL)" after we fork, but
+ on BSD4.3 systems using vfork, that can affect the
+ GDB process as well as the inferior (the signal handling tables
+ might be in memory, shared between the two). Since we establish
+ a handler for SIGQUIT, when we call exec it will set the signal
+ to SIG_DFL for us. */
+ signal (SIGQUIT, do_nothing);
+#ifdef SIGHUP
+ if (signal (SIGHUP, do_nothing) != SIG_IGN)
+ signal (SIGHUP, disconnect);
+#endif
+ signal (SIGFPE, float_handler);
-/* ARGSUSED */
-static void
-show_command (arg, from_tty)
- char *arg;
- int from_tty;
-{
- cmd_show_list (showlist, from_tty, "");
+#if defined(SIGWINCH) && defined(SIGWINCH_HANDLER)
+ signal (SIGWINCH, SIGWINCH_HANDLER);
+#endif
}
\f
-/* Add an element to the list of commands. */
-
-struct cmd_list_element *
-add_com (name, class, fun, doc)
- char *name;
- enum command_class class;
- void (*fun) PARAMS ((char *, int));
- char *doc;
-{
- return add_cmd (name, class, fun, doc, &cmdlist);
-}
+/* Read one line from the command input stream `instream'
+ into the local static buffer `linebuffer' (whose current length
+ is `linelength').
+ The buffer is made bigger as necessary.
+ Returns the address of the start of the line.
-/* Add an alias or abbreviation command to the list of commands. */
+ NULL is returned for end of file.
-struct cmd_list_element *
-add_com_alias (name, oldname, class, abbrev_flag)
- char *name;
- char *oldname;
- enum command_class class;
- int abbrev_flag;
-{
- return add_alias_cmd (name, oldname, class, abbrev_flag, &cmdlist);
-}
+ *If* the instream == stdin & stdin is a terminal, the line read
+ is copied into the file line saver (global var char *line,
+ length linesize) so that it can be duplicated.
-void
-error_no_arg (why)
- char *why;
-{
- error ("Argument required (%s).", why);
-}
+ This routine either uses fancy command line editing or
+ simple input as the user has requested. */
-/* ARGSUSED */
-static void
-help_command (command, from_tty)
- char *command;
- int from_tty; /* Ignored */
-{
- help_cmd (command, gdb_stdout);
-}
-\f
-static void
-validate_comname (comname)
- char *comname;
+char *
+command_line_input (char *prompt_arg, int repeat, char *annotation_suffix)
{
+ static char *linebuffer = 0;
+ static unsigned linelength = 0;
register char *p;
+ char *p1;
+ char *rl;
+ char *local_prompt = prompt_arg;
+ char *nline;
+ char got_eof = 0;
- if (comname == 0)
- error_no_arg ("name of command to define");
+ /* The annotation suffix must be non-NULL. */
+ if (annotation_suffix == NULL)
+ annotation_suffix = "";
- p = comname;
- while (*p)
+ if (annotation_level > 1 && instream == stdin)
{
- if (!isalnum (*p) && *p != '-' && *p != '_')
- error ("Junk in argument list: \"%s\"", p);
- p++;
+ local_prompt = alloca ((prompt_arg == NULL ? 0 : strlen (prompt_arg))
+ + strlen (annotation_suffix) + 40);
+ if (prompt_arg == NULL)
+ local_prompt[0] = '\0';
+ else
+ strcpy (local_prompt, prompt_arg);
+ strcat (local_prompt, "\n\032\032");
+ strcat (local_prompt, annotation_suffix);
+ strcat (local_prompt, "\n");
}
-}
-
-/* This is just a placeholder in the command data structures. */
-static void
-user_defined_command (ignore, from_tty)
- char *ignore;
- int from_tty;
-{
-}
-static void
-define_command (comname, from_tty)
- char *comname;
- int from_tty;
-{
- register struct command_line *cmds;
- register struct cmd_list_element *c, *newc, *hookc = 0;
- char *tem = comname;
- char tmpbuf[128];
-#define HOOK_STRING "hook-"
-#define HOOK_LEN 5
+ if (linebuffer == 0)
+ {
+ linelength = 80;
+ linebuffer = (char *) xmalloc (linelength);
+ }
- validate_comname (comname);
+ p = linebuffer;
- /* Look it up, and verify that we got an exact match. */
- c = lookup_cmd (&tem, cmdlist, "", -1, 1);
- if (c && !STREQ (comname, c->name))
- c = 0;
+ /* Control-C quits instantly if typed while in this loop
+ since it should not wait until the user types a newline. */
+ immediate_quit++;
+#ifdef STOP_SIGNAL
+ if (job_control)
+ {
+ if (event_loop_p)
+ signal (STOP_SIGNAL, handle_stop_sig);
+ else
+ signal (STOP_SIGNAL, stop_sig);
+ }
+#endif
- if (c)
+ while (1)
{
- if (c->class == class_user || c->class == class_alias)
- tem = "Redefine command \"%s\"? ";
+ /* Make sure that all output has been output. Some machines may let
+ you get away with leaving out some of the gdb_flush, but not all. */
+ wrap_here ("");
+ gdb_flush (gdb_stdout);
+ gdb_flush (gdb_stderr);
+
+ if (source_file_name != NULL)
+ {
+ ++source_line_number;
+ sprintf (source_error,
+ "%s%s:%d: Error in sourced command file:\n",
+ source_pre_error,
+ source_file_name,
+ source_line_number);
+ error_pre_print = source_error;
+ }
+
+ if (annotation_level > 1 && instream == stdin)
+ {
+ printf_unfiltered ("\n\032\032pre-");
+ printf_unfiltered (annotation_suffix);
+ printf_unfiltered ("\n");
+ }
+
+ /* Don't use fancy stuff if not talking to stdin. */
+ if (readline_hook && instream == NULL)
+ {
+ rl = (*readline_hook) (local_prompt);
+ }
+ else if (command_editing_p && instream == stdin && ISATTY (instream))
+ {
+ rl = readline (local_prompt);
+ }
else
- tem = "Really redefine built-in command \"%s\"? ";
- if (!query (tem, c->name))
- error ("Command \"%s\" not redefined.", c->name);
- }
+ {
+ rl = gdb_readline (local_prompt);
+ }
- /* If this new command is a hook, then mark the command which it
- is hooking. Note that we allow hooking `help' commands, so that
- we can hook the `stop' pseudo-command. */
+ if (annotation_level > 1 && instream == stdin)
+ {
+ printf_unfiltered ("\n\032\032post-");
+ printf_unfiltered (annotation_suffix);
+ printf_unfiltered ("\n");
+ }
- if (!strncmp (comname, HOOK_STRING, HOOK_LEN))
- {
- /* Look up cmd it hooks, and verify that we got an exact match. */
- tem = comname + HOOK_LEN;
- hookc = lookup_cmd (&tem, cmdlist, "", -1, 0);
- if (hookc && !STREQ (comname + HOOK_LEN, hookc->name))
- hookc = 0;
- if (!hookc)
+ if (!rl || rl == (char *) EOF)
{
- warning ("Your new `%s' command does not hook any existing command.",
- comname);
- if (!query ("Proceed? "))
- error ("Not confirmed.");
+ got_eof = 1;
+ break;
}
- }
+ if (strlen (rl) + 1 + (p - linebuffer) > linelength)
+ {
+ linelength = strlen (rl) + 1 + (p - linebuffer);
+ nline = (char *) xrealloc (linebuffer, linelength);
+ p += nline - linebuffer;
+ linebuffer = nline;
+ }
+ p1 = rl;
+ /* Copy line. Don't copy null at end. (Leaves line alone
+ if this was just a newline) */
+ while (*p1)
+ *p++ = *p1++;
- comname = savestring (comname, strlen (comname));
+ free (rl); /* Allocated in readline. */
- /* If the rest of the commands will be case insensitive, this one
- should behave in the same manner. */
- for (tem = comname; *tem; tem++)
- if (isupper (*tem))
- *tem = tolower (*tem);
+ if (p == linebuffer || *(p - 1) != '\\')
+ break;
- sprintf (tmpbuf, "Type commands for definition of \"%s\".", comname);
- cmds = read_command_lines (tmpbuf, from_tty);
+ p--; /* Put on top of '\'. */
+ local_prompt = (char *) 0;
+ }
- if (c && c->class == class_user)
- free_command_lines (&c->user_commands);
+#ifdef STOP_SIGNAL
+ if (job_control)
+ signal (STOP_SIGNAL, SIG_DFL);
+#endif
+ immediate_quit--;
- newc = add_cmd (comname, class_user, user_defined_command,
- (c && c->class == class_user)
- ? c->doc : savestring ("User-defined.", 13), &cmdlist);
- newc->user_commands = cmds;
+ if (got_eof)
+ return NULL;
- /* If this new command is a hook, then mark both commands as being
- tied. */
- if (hookc)
+#define SERVER_COMMAND_LENGTH 7
+ server_command =
+ (p - linebuffer > SERVER_COMMAND_LENGTH)
+ && STREQN (linebuffer, "server ", SERVER_COMMAND_LENGTH);
+ if (server_command)
{
- hookc->hook = newc; /* Target gets hooked. */
- newc->hookee = hookc; /* We are marked as hooking target cmd. */
+ /* Note that we don't set `line'. Between this and the check in
+ dont_repeat, this insures that repeating will still do the
+ right thing. */
+ *p = '\0';
+ return linebuffer + SERVER_COMMAND_LENGTH;
}
-}
-
-static void
-document_command (comname, from_tty)
- char *comname;
- int from_tty;
-{
- struct command_line *doclines;
- register struct cmd_list_element *c;
- char *tem = comname;
- char tmpbuf[128];
- validate_comname (comname);
-
- c = lookup_cmd (&tem, cmdlist, "", 0, 1);
+ /* Do history expansion if that is wished. */
+ if (history_expansion_p && instream == stdin
+ && ISATTY (instream))
+ {
+ char *history_value;
+ int expanded;
- if (c->class != class_user)
- error ("Command \"%s\" is built-in.", comname);
+ *p = '\0'; /* Insert null now. */
+ expanded = history_expand (linebuffer, &history_value);
+ if (expanded)
+ {
+ /* Print the changes. */
+ printf_unfiltered ("%s\n", history_value);
- sprintf (tmpbuf, "Type documentation for \"%s\".", comname);
- doclines = read_command_lines (tmpbuf, from_tty);
+ /* If there was an error, call this function again. */
+ if (expanded < 0)
+ {
+ free (history_value);
+ return command_line_input (prompt_arg, repeat, annotation_suffix);
+ }
+ if (strlen (history_value) > linelength)
+ {
+ linelength = strlen (history_value) + 1;
+ linebuffer = (char *) xrealloc (linebuffer, linelength);
+ }
+ strcpy (linebuffer, history_value);
+ p = linebuffer + strlen (linebuffer);
+ free (history_value);
+ }
+ }
- if (c->doc)
- free (c->doc);
+ /* If we just got an empty line, and that is supposed
+ to repeat the previous command, return the value in the
+ global buffer. */
+ if (repeat && p == linebuffer)
+ return line;
+ for (p1 = linebuffer; *p1 == ' ' || *p1 == '\t'; p1++);
+ if (repeat && !*p1)
+ return line;
- {
- register struct command_line *cl1;
- register int len = 0;
+ *p = 0;
- for (cl1 = doclines; cl1; cl1 = cl1->next)
- len += strlen (cl1->line) + 1;
+ /* Add line to history if appropriate. */
+ if (instream == stdin
+ && ISATTY (stdin) && *linebuffer)
+ add_history (linebuffer);
- c->doc = (char *) xmalloc (len + 1);
- *c->doc = 0;
+ /* Note: lines consisting solely of comments are added to the command
+ history. This is useful when you type a command, and then
+ realize you don't want to execute it quite yet. You can comment
+ out the command and then later fetch it from the value history
+ and remove the '#'. The kill ring is probably better, but some
+ people are in the habit of commenting things out. */
+ if (*p1 == '#')
+ *p1 = '\0'; /* Found a comment. */
- for (cl1 = doclines; cl1; cl1 = cl1->next)
- {
- strcat (c->doc, cl1->line);
- if (cl1->next)
- strcat (c->doc, "\n");
- }
- }
+ /* Save into global buffer if appropriate. */
+ if (repeat)
+ {
+ if (linelength > linesize)
+ {
+ line = xrealloc (line, linelength);
+ linesize = linelength;
+ }
+ strcpy (line, linebuffer);
+ return line;
+ }
- free_command_lines (&doclines);
+ return linebuffer;
}
\f
/* Print the GDB banner. */
void
-print_gdb_version (stream)
- struct ui_file *stream;
+print_gdb_version (struct ui_file *stream)
{
/* From GNU coding standards, first line is meant to be easy for a
program to parse, and is just canonical program name and version
}
fprintf_filtered (stream, "\".");
}
-
-/* ARGSUSED */
-static void
-show_version (args, from_tty)
- char *args;
- int from_tty;
-{
- immediate_quit++;
- print_gdb_version (gdb_stdout);
- printf_filtered ("\n");
- immediate_quit--;
-}
\f
/* get_prompt: access method for the GDB prompt string. */
static int gdb_prompt_escape;
static int
-get_prompt_1 (formatted_prompt)
- char *formatted_prompt;
+get_prompt_1 (void *data)
{
+ char *formatted_prompt = data;
char *local_prompt;
if (event_loop_p)
}
char *
-get_prompt ()
+get_prompt (void)
{
static char buf[MAX_PROMPT_SIZE];
}
void
-set_prompt (s)
- char *s;
+set_prompt (char *s)
{
/* ??rehrauer: I don't know why this fails, since it looks as though
assignments to prompt are wrapped in calls to savestring...
non-zero if we should quit, zero if we shouldn't. */
int
-quit_confirm ()
+quit_confirm (void)
{
if (inferior_pid != 0 && target_has_execution)
{
/* Quit without asking for confirmation. */
void
-quit_force (args, from_tty)
- char *args;
- int from_tty;
+quit_force (char *args, int from_tty)
{
int exit_code = 0;
exit (exit_code);
}
-/* Handle the quit command. */
-
-void
-quit_command (args, from_tty)
- char *args;
- int from_tty;
-{
- if (!quit_confirm ())
- error ("Not confirmed.");
- quit_force (args, from_tty);
-}
-
/* Returns whether GDB is running on a terminal and whether the user
desires that questions be asked of them on that terminal. */
int
-input_from_terminal_p ()
+input_from_terminal_p (void)
{
return gdb_has_a_terminal () && (instream == stdin) & caution;
}
\f
/* ARGSUSED */
static void
-pwd_command (args, from_tty)
- char *args;
- int from_tty;
-{
- if (args)
- error ("The \"pwd\" command does not take an argument: %s", args);
- getcwd (gdb_dirbuf, sizeof (gdb_dirbuf));
-
- if (!STREQ (gdb_dirbuf, current_directory))
- printf_unfiltered ("Working directory %s\n (canonically %s).\n",
- current_directory, gdb_dirbuf);
- else
- printf_unfiltered ("Working directory %s.\n", current_directory);
-}
-
-void
-cd_command (dir, from_tty)
- char *dir;
- int from_tty;
-{
- int len;
- /* Found something other than leading repetitions of "/..". */
- int found_real_path;
- char *p;
-
- /* If the new directory is absolute, repeat is a no-op; if relative,
- repeat might be useful but is more likely to be a mistake. */
- dont_repeat ();
-
- if (dir == 0)
- error_no_arg ("new working directory");
-
- dir = tilde_expand (dir);
- make_cleanup (free, dir);
-
- if (chdir (dir) < 0)
- perror_with_name (dir);
-
-#if defined(_WIN32) || defined(__MSDOS__)
- /* There's too much mess with DOSish names like "d:", "d:.",
- "d:./foo" etc. Instead of having lots of special #ifdef'ed code,
- simply get the canonicalized name of the current directory. */
- dir = getcwd (gdb_dirbuf, sizeof (gdb_dirbuf));
-#endif
-
- len = strlen (dir);
- if (SLASH_P (dir[len - 1]))
- {
- /* Remove the trailing slash unless this is a root directory
- (including a drive letter on non-Unix systems). */
- if (!(len == 1) /* "/" */
-#if defined(_WIN32) || defined(__MSDOS__)
- && !(!SLASH_P (*dir) && ROOTED_P (dir) && len <= 3) /* "d:/" */
-#endif
- )
- len--;
- }
-
- dir = savestring (dir, len);
- if (ROOTED_P (dir))
- current_directory = dir;
- else
- {
- if (SLASH_P (current_directory[strlen (current_directory) - 1]))
- current_directory = concat (current_directory, dir, NULL);
- else
- current_directory = concat (current_directory, SLASH_STRING, dir, NULL);
- free (dir);
- }
-
- /* Now simplify any occurrences of `.' and `..' in the pathname. */
-
- found_real_path = 0;
- for (p = current_directory; *p;)
- {
- if (SLASH_P (p[0]) && p[1] == '.' && (p[2] == 0 || SLASH_P (p[2])))
- strcpy (p, p + 2);
- else if (SLASH_P (p[0]) && p[1] == '.' && p[2] == '.'
- && (p[3] == 0 || SLASH_P (p[3])))
- {
- if (found_real_path)
- {
- /* Search backwards for the directory just before the "/.."
- and obliterate it and the "/..". */
- char *q = p;
- while (q != current_directory && !SLASH_P (q[-1]))
- --q;
-
- if (q == current_directory)
- /* current_directory is
- a relative pathname ("can't happen"--leave it alone). */
- ++p;
- else
- {
- strcpy (q - 1, p + 3);
- p = q - 1;
- }
- }
- else
- /* We are dealing with leading repetitions of "/..", for example
- "/../..", which is the Mach super-root. */
- p += 3;
- }
- else
- {
- found_real_path = 1;
- ++p;
- }
- }
-
- forget_cached_source_info ();
-
- if (from_tty)
- pwd_command ((char *) 0, 1);
-}
-\f
-struct source_cleanup_lines_args
-{
- int old_line;
- char *old_file;
- char *old_pre_error;
- char *old_error_pre_print;
-};
-
-static void
-source_cleanup_lines (args)
- PTR args;
-{
- struct source_cleanup_lines_args *p =
- (struct source_cleanup_lines_args *) args;
- source_line_number = p->old_line;
- source_file_name = p->old_file;
- source_pre_error = p->old_pre_error;
- error_pre_print = p->old_error_pre_print;
-}
-
-/* ARGSUSED */
-void
-source_command (args, from_tty)
- char *args;
- int from_tty;
-{
- FILE *stream;
- struct cleanup *old_cleanups;
- char *file = args;
- struct source_cleanup_lines_args old_lines;
- int needed_length;
-
- if (file == NULL)
- {
- error ("source command requires pathname of file to source.");
- }
-
- file = tilde_expand (file);
- old_cleanups = make_cleanup (free, file);
-
- stream = fopen (file, FOPEN_RT);
- if (!stream)
- {
- if (from_tty)
- perror_with_name (file);
- else
- return;
- }
-
- make_cleanup ((make_cleanup_func) fclose, stream);
-
- old_lines.old_line = source_line_number;
- old_lines.old_file = source_file_name;
- old_lines.old_pre_error = source_pre_error;
- old_lines.old_error_pre_print = error_pre_print;
- make_cleanup (source_cleanup_lines, &old_lines);
- source_line_number = 0;
- source_file_name = file;
- source_pre_error = error_pre_print == NULL ? "" : error_pre_print;
- source_pre_error = savestring (source_pre_error, strlen (source_pre_error));
- make_cleanup (free, source_pre_error);
- /* This will get set every time we read a line. So it won't stay "" for
- long. */
- error_pre_print = "";
-
- needed_length = strlen (source_file_name) + strlen (source_pre_error) + 80;
- if (source_error_allocated < needed_length)
- {
- source_error_allocated *= 2;
- if (source_error_allocated < needed_length)
- source_error_allocated = needed_length;
- if (source_error == NULL)
- source_error = xmalloc (source_error_allocated);
- else
- source_error = xrealloc (source_error, source_error_allocated);
- }
-
- read_command_file (stream);
-
- do_cleanups (old_cleanups);
-}
-
-/* ARGSUSED */
-static void
-echo_command (text, from_tty)
- char *text;
- int from_tty;
-{
- char *p = text;
- register int c;
-
- if (text)
- while ((c = *p++) != '\0')
- {
- if (c == '\\')
- {
- /* \ at end of argument is used after spaces
- so they won't be lost. */
- if (*p == 0)
- return;
-
- c = parse_escape (&p);
- if (c >= 0)
- printf_filtered ("%c", c);
- }
- else
- printf_filtered ("%c", c);
- }
-
- /* Force this output to appear now. */
- wrap_here ("");
- gdb_flush (gdb_stdout);
-}
-
-/* ARGSUSED */
-static void
-dont_repeat_command (ignored, from_tty)
- char *ignored;
- int from_tty;
+dont_repeat_command (char *ignored, int from_tty)
{
*line = 0; /* Can't call dont_repeat here because we're not
necessarily reading from stdin. */
/* Number of commands to print in each call to show_commands. */
#define Hist_print 10
-static void
-show_commands (args, from_tty)
- char *args;
- int from_tty;
+void
+show_commands (char *args, int from_tty)
{
/* Index for history commands. Relative to history_base. */
int offset;
than the number of the last command). Relative to history_base. */
int hist_len;
- extern HIST_ENTRY *history_get PARAMS ((int));
+extern HIST_ENTRY *history_get (int);
/* Print out some of the commands from the command history. */
/* First determine the length of the history list. */
;
else
/* "info editing <exp>" should print around command number <exp>. */
- num = (parse_and_eval_address (args) - history_base) - Hist_print / 2;
+ num = (parse_and_eval_long (args) - history_base) - Hist_print / 2;
}
/* "show commands" means print the last Hist_print commands. */
else
/* Called by do_setshow_command. */
/* ARGSUSED */
static void
-set_history_size_command (args, from_tty, c)
- char *args;
- int from_tty;
- struct cmd_list_element *c;
+set_history_size_command (char *args, int from_tty, struct cmd_list_element *c)
{
if (history_size == INT_MAX)
unstifle_history ();
}
/* ARGSUSED */
-static void
-set_history (args, from_tty)
- char *args;
- int from_tty;
+void
+set_history (char *args, int from_tty)
{
printf_unfiltered ("\"set history\" must be followed by the name of a history subcommand.\n");
help_list (sethistlist, "set history ", -1, gdb_stdout);
}
/* ARGSUSED */
-static void
-show_history (args, from_tty)
- char *args;
- int from_tty;
+void
+show_history (char *args, int from_tty)
{
cmd_show_list (showhistlist, from_tty, "");
}
/* Called by do_setshow_command. An elaborate joke. */
/* ARGSUSED */
-static void
-set_verbose (args, from_tty, c)
- char *args;
- int from_tty;
- struct cmd_list_element *c;
+void
+set_verbose (char *args, int from_tty, struct cmd_list_element *c)
{
char *cmdname = "verbose";
struct cmd_list_element *showcmd;
}
static void
-float_handler (signo)
- int signo;
+float_handler (int signo)
{
/* This message is based on ANSI C, section 4.7. Note that integer
divide by zero causes this, so "float" is a misnomer. */
error ("Erroneous arithmetic operation.");
}
-static void
-set_debug (arg, from_tty)
- char *arg;
- int from_tty;
-{
- printf_unfiltered ("\"set debug\" must be followed by the name of a print subcommand.\n");
- help_list (setdebuglist, "set debug ", -1, gdb_stdout);
-}
-
-static void
-show_debug (args, from_tty)
- char *args;
- int from_tty;
-{
- cmd_show_list (showdebuglist, from_tty, "");
-}
-
-static void
-init_cmd_lists ()
-{
- cmdlist = NULL;
- infolist = NULL;
- enablelist = NULL;
- disablelist = NULL;
- togglelist = NULL;
- stoplist = NULL;
- deletelist = NULL;
- enablebreaklist = NULL;
- setlist = NULL;
- unsetlist = NULL;
- showlist = NULL;
- sethistlist = NULL;
- showhistlist = NULL;
- unsethistlist = NULL;
- maintenancelist = NULL;
- maintenanceinfolist = NULL;
- maintenanceprintlist = NULL;
- setprintlist = NULL;
- showprintlist = NULL;
- setchecklist = NULL;
- showchecklist = NULL;
-}
-
/* Init the history buffer. Note that we are called after the init file(s)
* have been read so that the user can change the history file via his
* .gdbinit file (for instance). The GDBHISTFILE environment variable
*/
void
-init_history ()
+init_history (void)
{
char *tmpenv;
}
static void
-init_main ()
+init_main (void)
{
struct cmd_list_element *c;
/* Setup important stuff for command line editing. */
rl_completion_entry_function = (int (*)()) readline_line_completion_function;
- rl_completer_word_break_characters = gdb_completer_word_break_characters;
- rl_completer_quote_characters = gdb_completer_quote_characters;
+ rl_completer_word_break_characters =
+ get_gdb_completer_word_break_characters ();
+ rl_completer_quote_characters = get_gdb_completer_quote_characters ();
rl_readline_name = "gdb";
- /* Define the classes of commands.
- They will appear in the help list in the reverse of this order. */
-
- add_cmd ("internals", class_maintenance, NO_FUNCTION,
- "Maintenance commands.\n\
-Some gdb commands are provided just for use by gdb maintainers.\n\
-These commands are subject to frequent change, and may not be as\n\
-well documented as user commands.",
- &cmdlist);
- add_cmd ("obscure", class_obscure, NO_FUNCTION, "Obscure features.", &cmdlist);
- add_cmd ("aliases", class_alias, NO_FUNCTION, "Aliases of other commands.", &cmdlist);
- add_cmd ("user-defined", class_user, NO_FUNCTION, "User-defined commands.\n\
-The commands in this class are those defined by the user.\n\
-Use the \"define\" command to define a command.", &cmdlist);
- add_cmd ("support", class_support, NO_FUNCTION, "Support facilities.", &cmdlist);
- if (!dbx_commands)
- add_cmd ("status", class_info, NO_FUNCTION, "Status inquiries.", &cmdlist);
- add_cmd ("files", class_files, NO_FUNCTION, "Specifying and examining files.", &cmdlist);
- add_cmd ("breakpoints", class_breakpoint, NO_FUNCTION, "Making program stop at certain points.", &cmdlist);
- add_cmd ("data", class_vars, NO_FUNCTION, "Examining data.", &cmdlist);
- add_cmd ("stack", class_stack, NO_FUNCTION, "Examining the stack.\n\
-The stack is made up of stack frames. Gdb assigns numbers to stack frames\n\
-counting from zero for the innermost (currently executing) frame.\n\n\
-At any time gdb identifies one frame as the \"selected\" frame.\n\
-Variable lookups are done with respect to the selected frame.\n\
-When the program being debugged stops, gdb selects the innermost frame.\n\
-The commands below can be used to select other frames by number or address.",
- &cmdlist);
- add_cmd ("running", class_run, NO_FUNCTION, "Running the program.", &cmdlist);
-
- add_com ("pwd", class_files, pwd_command,
- "Print working directory. This is used for your program as well.");
- c = add_cmd ("cd", class_files, cd_command,
- "Set working directory to DIR for debugger and program being debugged.\n\
-The change does not take effect for the program being debugged\n\
-until the next time it is started.", &cmdlist);
- c->completer = filename_completer;
-
/* The set prompt command is different depending whether or not the
async version is run. NOTE: this difference is going to
disappear as we make the event loop be the default engine of
&setlist),
&showlist);
- add_com ("echo", class_support, echo_command,
- "Print a constant string. Give string as argument.\n\
-C escape sequences may be used in the argument.\n\
-No newline is added at the end of the argument;\n\
-use \"\\n\" if you want a newline to be printed.\n\
-Since leading and trailing whitespace are ignored in command arguments,\n\
-if you want to print some you must use \"\\\" before leading whitespace\n\
-to be printed or after trailing whitespace.");
- add_com ("document", class_support, document_command,
- "Document a user-defined command.\n\
-Give command name as argument. Give documentation on following lines.\n\
-End with a line of just \"end\".");
- add_com ("define", class_support, define_command,
- "Define a new command name. Command name is argument.\n\
-Definition appears on following lines, one command per line.\n\
-End with a line of just \"end\".\n\
-Use the \"document\" command to give documentation for the new command.\n\
-Commands defined in this way may have up to ten arguments.");
-
-#ifdef __STDC__
- c = add_cmd ("source", class_support, source_command,
- "Read commands from a file named FILE.\n\
-Note that the file \"" GDBINIT_FILENAME "\" is read automatically in this way\n\
-when gdb is started.", &cmdlist);
-#else
- /* Punt file name, we can't help it easily. */
- c = add_cmd ("source", class_support, source_command,
- "Read commands from a file named FILE.\n\
-Note that the file \".gdbinit\" is read automatically in this way\n\
-when gdb is started.", &cmdlist);
-#endif
- c->completer = filename_completer;
-
- add_com ("quit", class_support, quit_command, "Exit gdb.");
- add_com ("help", class_support, help_command, "Print list of commands.");
- add_com_alias ("q", "quit", class_support, 1);
- add_com_alias ("h", "help", class_support, 1);
-
add_com ("dont-repeat", class_support, dont_repeat_command, "Don't repeat this command.\n\
Primarily used inside of user-defined commands that should not be repeated when\n\
hitting return.");
- c = add_set_cmd ("verbose", class_support, var_boolean, (char *) &info_verbose,
- "Set ",
- &setlist),
- add_show_from_set (c, &showlist);
- c->function.sfunc = set_verbose;
- set_verbose (NULL, 0, c);
-
/* The set editing command is different depending whether or not the
async version is run. NOTE: this difference is going to disappear
as we make the event loop be the default engine of gdb. */
c->function.sfunc = set_async_editing_command;
}
- add_prefix_cmd ("history", class_support, set_history,
- "Generic command for setting command history parameters.",
- &sethistlist, "set history ", 0, &setlist);
- add_prefix_cmd ("history", class_support, show_history,
- "Generic command for showing command history parameters.",
- &showhistlist, "show history ", 0, &showlist);
-
- add_show_from_set
- (add_set_cmd ("expansion", no_class, var_boolean, (char *) &history_expansion_p,
- "Set history expansion on command input.\n\
-Without an argument, history expansion is enabled.", &sethistlist),
- &showhistlist);
-
add_show_from_set
(add_set_cmd ("save", no_class, var_boolean, (char *) &write_history_p,
"Set saving of the history record on exit.\n\
&setlist),
&showlist);
- add_prefix_cmd ("info", class_info, info_command,
- "Generic command for showing things about the program being debugged.",
- &infolist, "info ", 0, &cmdlist);
- add_com_alias ("i", "info", class_info, 1);
-
- add_com ("complete", class_obscure, complete_command,
- "List the completions for the rest of the line as a command.");
-
- add_prefix_cmd ("show", class_info, show_command,
- "Generic command for showing things about the debugger.",
- &showlist, "show ", 0, &cmdlist);
- /* Another way to get at the same thing. */
- add_info ("set", show_command, "Show all GDB settings.");
-
- add_cmd ("commands", no_class, show_commands,
- "Show the history of commands you typed.\n\
-You can supply a command number to start with, or a `+' to start after\n\
-the previous command number shown.",
- &showlist);
-
- add_cmd ("version", no_class, show_version,
- "Show what version of GDB this is.", &showlist);
-
- add_com ("while", class_support, while_command,
- "Execute nested commands WHILE the conditional expression is non zero.\n\
-The conditional expression must follow the word `while' and must in turn be\n\
-followed by a new line. The nested commands must be entered one per line,\n\
-and should be terminated by the word `end'.");
-
- add_com ("if", class_support, if_command,
- "Execute nested commands once IF the conditional expression is non zero.\n\
-The conditional expression must follow the word `if' and must in turn be\n\
-followed by a new line. The nested commands must be entered one per line,\n\
-and should be terminated by the word 'else' or `end'. If an else clause\n\
-is used, the same rules apply to its nested commands as to the first ones.");
-
- /* If target is open when baud changes, it doesn't take effect until the
- next open (I think, not sure). */
- add_show_from_set (add_set_cmd ("remotebaud", no_class,
- var_zinteger, (char *) &baud_rate,
- "Set baud rate for remote serial I/O.\n\
-This value is used to set the speed of the serial port when debugging\n\
-using remote targets.", &setlist),
- &showlist);
-
- c = add_set_cmd ("remotedebug", no_class, var_zinteger,
- (char *) &remote_debug,
- "Set debugging of remote protocol.\n\
-When enabled, each packet sent or received with the remote target\n\
-is displayed.", &setlist);
- deprecate_cmd (c, "set debug remote");
- deprecate_cmd (add_show_from_set (c, &showlist), "show debug remote");
-
- add_show_from_set (add_set_cmd ("remote", no_class, var_zinteger,
- (char *) &remote_debug,
- "Set debugging of remote protocol.\n\
-When enabled, each packet sent or received with the remote target\n\
-is displayed.", &setdebuglist),
- &showdebuglist);
-
- add_show_from_set (
- add_set_cmd ("remotetimeout", no_class, var_integer, (char *) &remote_timeout,
- "Set timeout limit to wait for target to respond.\n\
-This value is used to set the time limit for gdb to wait for a response\n\
-from the target.", &setlist),
- &showlist);
-
/* The set annotate command is different depending whether or not
the async version is run. NOTE: this difference is going to
disappear as we make the event loop be the default engine of
Use \"on\" to enable the notification, and \"off\" to disable it.", &setlist),
&showlist);
}
- add_prefix_cmd ("debug", no_class, set_debug,
- "Generic command for setting gdb debugging flags",
- &setdebuglist, "set debug ", 0, &setlist);
-
- add_prefix_cmd ("debug", no_class, show_debug,
- "Generic command for showing gdb debugging flags",
- &showdebuglist, "show debug ", 0, &showlist);
}