/* Tracing functionality for remote targets in custom GDB protocol
- Copyright (C) 1997-2013 Free Software Foundation, Inc.
+ Copyright (C) 1997-2014 Free Software Foundation, Inc.
This file is part of GDB.
#include "gdbcmd.h"
#include "value.h"
#include "target.h"
+#include "target-dcache.h"
#include "language.h"
-#include "gdb_string.h"
+#include <string.h>
#include "inferior.h"
#include "breakpoint.h"
#include "tracepoint.h"
#include "exceptions.h"
#include "cli/cli-utils.h"
#include "probe.h"
+#include "ctf.h"
+#include "completer.h"
+#include "filestuff.h"
/* readline include files */
#include "readline/readline.h"
/* readline defines this. */
#undef savestring
-#ifdef HAVE_UNISTD_H
#include <unistd.h>
-#endif
#ifndef O_LARGEFILE
#define O_LARGEFILE 0
#endif
-extern int hex2bin (const char *hex, gdb_byte *bin, int count);
-extern int bin2hex (const gdb_byte *bin, char *hex, int count);
-
/* Maximum length of an agent aexpression.
This accounts for the fact that packets are limited to 400 bytes
(which includes everything -- including the checksum), and assumes
large. (400 - 31)/2 == 184 */
#define MAX_AGENT_EXPR_LEN 184
-#define TFILE_PID (1)
-
/* A hook used to notify the UI of tracepoint operations. */
void (*deprecated_trace_find_hook) (char *arg, int from_tty);
void (*deprecated_trace_start_stop_hook) (int start, int from_tty);
-extern void (*deprecated_readline_begin_hook) (char *, ...);
-extern char *(*deprecated_readline_hook) (char *);
-extern void (*deprecated_readline_end_hook) (void);
-
/*
Tracepoint.c:
typedef struct trace_state_variable tsv_s;
DEF_VEC_O(tsv_s);
-/* An object describing the contents of a traceframe. */
-
-struct traceframe_info
-{
- /* Collected memory. */
- VEC(mem_range_s) *memory;
-};
-
static VEC(tsv_s) *tvariables;
/* The next integer to assign to a variable. */
/* Tracepoint for last traceframe collected. */
static int tracepoint_number;
-/* Symbol for function for last traceframe collected. */
-static struct symbol *traceframe_fun;
-
-/* Symtab and line for last traceframe collected. */
-static struct symtab_and_line traceframe_sal;
-
/* The traceframe info of the current traceframe. NULL if we haven't
yet attempted to fetch it, or if the target does not support
fetching this object, or if we're not inspecting a traceframe
static int circular_trace_buffer;
+/* This variable is the requested trace buffer size, or -1 to indicate
+ that we don't care and leave it up to the target to set a size. */
+
+static int trace_buffer_size = -1;
+
/* Textual notes applying to the current and/or future trace runs. */
char *trace_user = NULL;
static void free_uploaded_tps (struct uploaded_tp **utpp);
static void free_uploaded_tsvs (struct uploaded_tsv **utsvp);
+static struct command_line *
+ all_tracepoint_actions_and_cleanup (struct breakpoint *t);
extern void _initialize_tracepoint (void);
if (info != NULL)
{
VEC_free (mem_range_s, info->memory);
+ VEC_free (int, info->tvars);
xfree (info);
}
set_traceframe_context (struct frame_info *trace_frame)
{
CORE_ADDR trace_pc;
+ struct symbol *traceframe_fun;
+ struct symtab_and_line traceframe_sal;
/* Save as globals for internal use. */
if (trace_frame != NULL
return NULL;
}
+/* Look for a trace state variable of the given number. Return NULL if
+ not found. */
+
+struct trace_state_variable *
+find_trace_state_variable_by_number (int number)
+{
+ struct trace_state_variable *tsv;
+ int ix;
+
+ for (ix = 0; VEC_iterate (tsv_s, tvariables, ix, tsv); ++ix)
+ if (tsv->number == number)
+ return tsv;
+
+ return NULL;
+}
+
static void
delete_trace_state_variable (const char *name)
{
warning (_("No trace variable named \"$%s\", not deleting"), name);
}
+/* Throws an error if NAME is not valid syntax for a trace state
+ variable's name. */
+
+void
+validate_trace_state_variable_name (const char *name)
+{
+ const char *p;
+
+ if (*name == '\0')
+ error (_("Must supply a non-empty variable name"));
+
+ /* All digits in the name is reserved for value history
+ references. */
+ for (p = name; isdigit (*p); p++)
+ ;
+ if (*p == '\0')
+ error (_("$%s is not a valid trace state variable name"), name);
+
+ for (p = name; isalnum (*p) || *p == '_'; p++)
+ ;
+ if (*p != '\0')
+ error (_("$%s is not a valid trace state variable name"), name);
+}
+
/* The 'tvariable' command collects a name and optional expression to
evaluate into an initial value. */
static void
trace_variable_command (char *args, int from_tty)
{
- struct expression *expr;
struct cleanup *old_chain;
- struct internalvar *intvar = NULL;
LONGEST initval = 0;
struct trace_state_variable *tsv;
+ char *name, *p;
if (!args || !*args)
- error_no_arg (_("trace state variable name"));
+ error_no_arg (_("Syntax is $NAME [ = EXPR ]"));
- /* All the possible valid arguments are expressions. */
- expr = parse_expression (args);
- old_chain = make_cleanup (free_current_contents, &expr);
+ /* Only allow two syntaxes; "$name" and "$name=value". */
+ p = skip_spaces (args);
- if (expr->nelts == 0)
- error (_("No expression?"));
+ if (*p++ != '$')
+ error (_("Name of trace variable should start with '$'"));
- /* Only allow two syntaxes; "$name" and "$name=value". */
- if (expr->elts[0].opcode == OP_INTERNALVAR)
- {
- intvar = expr->elts[1].internalvar;
- }
- else if (expr->elts[0].opcode == BINOP_ASSIGN
- && expr->elts[1].opcode == OP_INTERNALVAR)
- {
- intvar = expr->elts[2].internalvar;
- initval = value_as_long (evaluate_subexpression_type (expr, 4));
- }
- else
+ name = p;
+ while (isalnum (*p) || *p == '_')
+ p++;
+ name = savestring (name, p - name);
+ old_chain = make_cleanup (xfree, name);
+
+ p = skip_spaces (p);
+ if (*p != '=' && *p != '\0')
error (_("Syntax must be $NAME [ = EXPR ]"));
- if (!intvar)
- error (_("No name given"));
+ validate_trace_state_variable_name (name);
- if (strlen (internalvar_name (intvar)) <= 0)
- error (_("Must supply a non-empty variable name"));
+ if (*p == '=')
+ initval = value_as_long (parse_and_eval (++p));
/* If the variable already exists, just change its initial value. */
- tsv = find_trace_state_variable (internalvar_name (intvar));
+ tsv = find_trace_state_variable (name);
if (tsv)
{
if (tsv->initial_value != initval)
}
/* Create a new variable. */
- tsv = create_trace_state_variable (internalvar_name (intvar));
+ tsv = create_trace_state_variable (name);
tsv->initial_value = initval;
observer_notify_tsv_created (tsv);
it means that somebody issued the "command" at the top level,
which is always an error. */
-void
+static void
end_actions_pseudocommand (char *args, int from_tty)
{
error (_("This command cannot be used at the top level."));
}
-void
+static void
while_stepping_pseudocommand (char *args, int from_tty)
{
error (_("This command can only be used in a tracepoint actions list."));
/* Parse any collection options, such as /s for strings. */
-char *
-decode_agent_options (char *exp)
+const char *
+decode_agent_options (const char *exp, int *trace_string)
{
struct value_print_options opts;
+ *trace_string = 0;
+
if (*exp != '/')
return exp;
/* Allow an optional decimal number giving an explicit maximum
string length, defaulting it to the "print elements" value;
so "collect/s80 mystr" gets at most 80 bytes of string. */
- trace_string_kludge = opts.print_max;
+ *trace_string = opts.print_max;
exp++;
if (*exp >= '0' && *exp <= '9')
- trace_string_kludge = atoi (exp);
+ *trace_string = atoi (exp);
while (*exp >= '0' && *exp <= '9')
exp++;
}
else
error (_("Undefined collection format \"%c\"."), *exp);
- exp = skip_spaces (exp);
+ exp = skip_spaces_const (exp);
return exp;
}
/* worker function */
void
-validate_actionline (char **line, struct breakpoint *b)
+validate_actionline (const char *line, struct breakpoint *b)
{
struct cmd_list_element *c;
struct expression *exp = NULL;
struct cleanup *old_chain = NULL;
- char *p, *tmp_p;
+ const char *tmp_p;
+ const char *p;
struct bp_location *loc;
struct agent_expr *aexpr;
struct tracepoint *t = (struct tracepoint *) b;
/* If EOF is typed, *line is NULL. */
- if (*line == NULL)
+ if (line == NULL)
return;
- for (p = *line; isspace ((int) *p);)
- p++;
+ p = skip_spaces_const (line);
/* Symbol lookup etc. */
if (*p == '\0') /* empty line: just prompt for another line. */
if (cmd_cfunc_eq (c, collect_pseudocommand))
{
- trace_string_kludge = 0;
+ int trace_string = 0;
+
if (*p == '/')
- p = decode_agent_options (p);
+ p = decode_agent_options (p, &trace_string);
do
{ /* Repeat over a comma-separated list. */
QUIT; /* Allow user to bail out with ^C. */
- while (isspace ((int) *p))
- p++;
+ p = skip_spaces_const (p);
if (*p == '$') /* Look for special pseudo-symbols. */
{
/* We have something to collect, make sure that the expr to
bytecode translator can handle it and that it's not too
long. */
- aexpr = gen_trace_for_expr (loc->address, exp);
+ aexpr = gen_trace_for_expr (loc->address, exp, trace_string);
make_cleanup_free_agent_expr (aexpr);
if (aexpr->len > MAX_AGENT_EXPR_LEN)
do
{ /* Repeat over a comma-separated list. */
QUIT; /* Allow user to bail out with ^C. */
- while (isspace ((int) *p))
- p++;
+ p = skip_spaces_const (p);
tmp_p = p;
for (loc = t->base.loc; loc; loc = loc->next)
{
p = tmp_p;
+
/* Only expressions are allowed for this action. */
exp = parse_exp_1 (&p, loc->address,
block_for_pc (loc->address), 1);
else if (cmd_cfunc_eq (c, while_stepping_pseudocommand))
{
- char *steparg; /* In case warning is necessary. */
+ char *endp;
- while (isspace ((int) *p))
- p++;
- steparg = p;
-
- if (*p == '\0' || (t->step_count = strtol (p, &p, 0)) == 0)
- error (_("while-stepping step count `%s' is malformed."), *line);
+ p = skip_spaces_const (p);
+ t->step_count = strtol (p, &endp, 0);
+ if (endp == p || t->step_count == 0)
+ error (_("while-stepping step count `%s' is malformed."), line);
+ p = endp;
}
else if (cmd_cfunc_eq (c, end_actions_pseudocommand))
;
else
- error (_("`%s' is not a supported tracepoint action."), *line);
+ error (_("`%s' is not a supported tracepoint action."), line);
}
enum {
memrange_absolute = -1
};
-struct memrange
-{
- int type; /* memrange_absolute for absolute memory range,
- else basereg number. */
- bfd_signed_vma start;
- bfd_signed_vma end;
-};
-
-struct collection_list
- {
- unsigned char regs_mask[32]; /* room for up to 256 regs */
- long listsize;
- long next_memrange;
- struct memrange *list;
- long aexpr_listsize; /* size of array pointed to by expr_list elt */
- long next_aexpr_elt;
- struct agent_expr **aexpr_list;
-
- /* True is the user requested a collection of "$_sdata", "static
- tracepoint data". */
- int strace_data;
- }
-tracepoint_list, stepping_list;
-
/* MEMRANGE functions: */
static int memrange_cmp (const void *, const void *);
struct symbol *sym,
struct gdbarch *gdbarch,
long frame_regno, long frame_offset,
- CORE_ADDR scope)
+ CORE_ADDR scope,
+ int trace_string)
{
unsigned long len;
unsigned int reg;
struct agent_expr *aexpr;
struct cleanup *old_chain1 = NULL;
- aexpr = gen_trace_for_var (scope, gdbarch, sym);
+ aexpr = gen_trace_for_var (scope, gdbarch, sym, trace_string);
/* It can happen that the symbol is recorded as a computed
location, but it's been optimized away and doesn't actually
long frame_regno;
long frame_offset;
int count;
+ int trace_string;
};
/* The callback for the locals and args iterators. */
struct add_local_symbols_data *p = cb_data;
collect_symbol (p->collect, sym, p->gdbarch, p->frame_regno,
- p->frame_offset, p->pc);
+ p->frame_offset, p->pc, p->trace_string);
p->count++;
+
+ VEC_safe_push (char_ptr, p->collect->wholly_collected,
+ xstrdup (print_name));
}
/* Add all locals (or args) symbols to collection list. */
static void
add_local_symbols (struct collection_list *collect,
struct gdbarch *gdbarch, CORE_ADDR pc,
- long frame_regno, long frame_offset, int type)
+ long frame_regno, long frame_offset, int type,
+ int trace_string)
{
struct block *block;
struct add_local_symbols_data cb_data;
cb_data.frame_regno = frame_regno;
cb_data.frame_offset = frame_offset;
cb_data.count = 0;
+ cb_data.trace_string = trace_string;
if (type == 'L')
{
list->next_aexpr_elt = 0;
memset (list->regs_mask, 0, sizeof (list->regs_mask));
list->strace_data = 0;
+
+ xfree (list->aexpr_list);
+ xfree (list->list);
+
+ VEC_free (char_ptr, list->wholly_collected);
+ VEC_free (char_ptr, list->computed);
+}
+
+/* A cleanup wrapper for function clear_collection_list. */
+
+static void
+do_clear_collection_list (void *list)
+{
+ struct collection_list *l = list;
+
+ clear_collection_list (l);
+}
+
+/* Initialize collection_list CLIST. */
+
+static void
+init_collection_list (struct collection_list *clist)
+{
+ memset (clist, 0, sizeof *clist);
+
+ clist->listsize = 128;
+ clist->list = xcalloc (clist->listsize,
+ sizeof (struct memrange));
+
+ clist->aexpr_listsize = 128;
+ clist->aexpr_list = xcalloc (clist->aexpr_listsize,
+ sizeof (struct agent_expr *));
}
/* Reduce a collection list to string form (for gdb protocol). */
static char **
-stringify_collection_list (struct collection_list *list, char *string)
+stringify_collection_list (struct collection_list *list)
{
char temp_buf[2048];
char tmp2[40];
return *str_list;
}
+/* Add the printed expression EXP to *LIST. */
+
+static void
+append_exp (struct expression *exp, VEC(char_ptr) **list)
+{
+ struct ui_file *tmp_stream = mem_fileopen ();
+ char *text;
+
+ print_expression (exp, tmp_stream);
+
+ text = ui_file_xstrdup (tmp_stream, NULL);
+
+ VEC_safe_push (char_ptr, *list, text);
+ ui_file_delete (tmp_stream);
+}
static void
encode_actions_1 (struct command_line *action,
- struct breakpoint *t,
struct bp_location *tloc,
int frame_reg,
LONGEST frame_offset,
struct collection_list *collect,
struct collection_list *stepping_list)
{
- char *action_exp;
+ const char *action_exp;
struct expression *exp = NULL;
int i;
struct value *tempval;
{
QUIT; /* Allow user to bail out with ^C. */
action_exp = action->line;
- while (isspace ((int) *action_exp))
- action_exp++;
+ action_exp = skip_spaces_const (action_exp);
cmd = lookup_cmd (&action_exp, cmdlist, "", -1, 1);
if (cmd == 0)
if (cmd_cfunc_eq (cmd, collect_pseudocommand))
{
- trace_string_kludge = 0;
+ int trace_string = 0;
+
if (*action_exp == '/')
- action_exp = decode_agent_options (action_exp);
+ action_exp = decode_agent_options (action_exp, &trace_string);
do
{ /* Repeat over a comma-separated list. */
QUIT; /* Allow user to bail out with ^C. */
- while (isspace ((int) *action_exp))
- action_exp++;
+ action_exp = skip_spaces_const (action_exp);
if (0 == strncasecmp ("$reg", action_exp, 4))
{
tloc->address,
frame_reg,
frame_offset,
- 'A');
+ 'A',
+ trace_string);
action_exp = strchr (action_exp, ','); /* more? */
}
else if (0 == strncasecmp ("$loc", action_exp, 4))
tloc->address,
frame_reg,
frame_offset,
- 'L');
+ 'L',
+ trace_string);
action_exp = strchr (action_exp, ','); /* more? */
}
else if (0 == strncasecmp ("$_ret", action_exp, 5))
struct cleanup *old_chain1 = NULL;
aexpr = gen_trace_for_return_address (tloc->address,
- tloc->gdbarch);
+ tloc->gdbarch,
+ trace_string);
old_chain1 = make_cleanup_free_agent_expr (aexpr);
check_typedef (exp->elts[1].type);
add_memrange (collect, memrange_absolute, addr,
TYPE_LENGTH (exp->elts[1].type));
+ append_exp (exp, &collect->computed);
break;
case OP_VAR_VALUE:
- collect_symbol (collect,
- exp->elts[2].symbol,
- tloc->gdbarch,
- frame_reg,
- frame_offset,
- tloc->address);
+ {
+ struct symbol *sym = exp->elts[2].symbol;
+ char_ptr name = (char_ptr) SYMBOL_NATURAL_NAME (sym);
+
+ collect_symbol (collect,
+ exp->elts[2].symbol,
+ tloc->gdbarch,
+ frame_reg,
+ frame_offset,
+ tloc->address,
+ trace_string);
+ VEC_safe_push (char_ptr,
+ collect->wholly_collected,
+ name);
+ }
break;
default: /* Full-fledged expression. */
- aexpr = gen_trace_for_expr (tloc->address, exp);
+ aexpr = gen_trace_for_expr (tloc->address, exp,
+ trace_string);
old_chain1 = make_cleanup_free_agent_expr (aexpr);
}
}
}
+
+ append_exp (exp, &collect->computed);
break;
} /* switch */
do_cleanups (old_chain);
do
{ /* Repeat over a comma-separated list. */
QUIT; /* Allow user to bail out with ^C. */
- while (isspace ((int) *action_exp))
- action_exp++;
+ action_exp = skip_spaces_const (action_exp);
{
struct cleanup *old_chain = NULL;
here. */
gdb_assert (stepping_list);
- encode_actions_1 (action->body_list[0], t, tloc, frame_reg,
+ encode_actions_1 (action->body_list[0], tloc, frame_reg,
frame_offset, stepping_list, NULL);
}
else
} /* for */
}
-/* Render all actions into gdb protocol. */
+/* Encode actions of tracepoint TLOC->owner and fill TRACEPOINT_LIST
+ and STEPPING_LIST. Return a cleanup pointer to clean up both
+ TRACEPOINT_LIST and STEPPING_LIST. */
-void
-encode_actions (struct breakpoint *t, struct bp_location *tloc,
- char ***tdp_actions, char ***stepping_actions)
+struct cleanup *
+encode_actions_and_make_cleanup (struct bp_location *tloc,
+ struct collection_list *tracepoint_list,
+ struct collection_list *stepping_list)
{
- static char tdp_buff[2048], step_buff[2048];
char *default_collect_line = NULL;
struct command_line *actions;
struct command_line *default_collect_action = NULL;
int frame_reg;
LONGEST frame_offset;
- struct cleanup *back_to;
+ struct cleanup *back_to, *return_chain;
- back_to = make_cleanup (null_cleanup, NULL);
-
- clear_collection_list (&tracepoint_list);
- clear_collection_list (&stepping_list);
+ return_chain = make_cleanup (null_cleanup, NULL);
+ init_collection_list (tracepoint_list);
+ init_collection_list (stepping_list);
- *tdp_actions = NULL;
- *stepping_actions = NULL;
+ make_cleanup (do_clear_collection_list, tracepoint_list);
+ make_cleanup (do_clear_collection_list, stepping_list);
+ back_to = make_cleanup (null_cleanup, NULL);
gdbarch_virtual_frame_pointer (tloc->gdbarch,
tloc->address, &frame_reg, &frame_offset);
- actions = breakpoint_commands (t);
+ actions = all_tracepoint_actions_and_cleanup (tloc->owner);
- /* If there are default expressions to collect, make up a collect
- action and prepend to the action list to encode. Note that since
- validation is per-tracepoint (local var "xyz" might be valid for
- one tracepoint and not another, etc), we make up the action on
- the fly, and don't cache it. */
- if (*default_collect)
- {
- char *line;
+ encode_actions_1 (actions, tloc, frame_reg, frame_offset,
+ tracepoint_list, stepping_list);
- default_collect_line = xstrprintf ("collect %s", default_collect);
- make_cleanup (xfree, default_collect_line);
+ memrange_sortmerge (tracepoint_list);
+ memrange_sortmerge (stepping_list);
- line = default_collect_line;
- validate_actionline (&line, t);
+ do_cleanups (back_to);
+ return return_chain;
+}
- default_collect_action = xmalloc (sizeof (struct command_line));
- make_cleanup (xfree, default_collect_action);
- default_collect_action->next = actions;
- default_collect_action->line = line;
- actions = default_collect_action;
- }
- encode_actions_1 (actions, t, tloc, frame_reg, frame_offset,
- &tracepoint_list, &stepping_list);
+/* Render all actions into gdb protocol. */
- memrange_sortmerge (&tracepoint_list);
- memrange_sortmerge (&stepping_list);
+void
+encode_actions_rsp (struct bp_location *tloc, char ***tdp_actions,
+ char ***stepping_actions)
+{
+ struct collection_list tracepoint_list, stepping_list;
+ struct cleanup *cleanup;
- *tdp_actions = stringify_collection_list (&tracepoint_list,
- tdp_buff);
- *stepping_actions = stringify_collection_list (&stepping_list,
- step_buff);
+ *tdp_actions = NULL;
+ *stepping_actions = NULL;
- do_cleanups (back_to);
+ cleanup = encode_actions_and_make_cleanup (tloc, &tracepoint_list,
+ &stepping_list);
+
+ *tdp_actions = stringify_collection_list (&tracepoint_list);
+ *stepping_actions = stringify_collection_list (&stepping_list);
+
+ do_cleanups (cleanup);
}
static void
" GDB is disconnected\n"));
}
+/* Reset local state of tracing. */
+
+void
+trace_reset_local_state (void)
+{
+ set_traceframe_num (-1);
+ set_tracepoint_num (-1);
+ set_traceframe_context (NULL);
+ clear_traceframe_info ();
+}
void
start_tracing (char *notes)
/* Set some mode flags. */
target_set_disconnected_tracing (disconnected_tracing);
target_set_circular_trace_buffer (circular_trace_buffer);
+ target_set_trace_buffer_size (trace_buffer_size);
if (!notes)
notes = trace_notes;
target_trace_start ();
/* Reset our local state. */
- set_traceframe_num (-1);
- set_tracepoint_num (-1);
- set_traceframe_context (NULL);
+ trace_reset_local_state ();
current_trace_status()->running = 1;
- clear_traceframe_info ();
}
/* The tstart command requests the target to start a new trace run.
if (status == -1)
{
- if (ts->from_file)
+ if (ts->filename != NULL)
printf_filtered (_("Using a trace file.\n"));
else
{
/* Reporting a run time is more readable than two long numbers. */
printf_filtered (_("Trace started at %ld.%06ld secs, stopped %ld.%06ld secs later.\n"),
- (long int) ts->start_time / 1000000,
- (long int) ts->start_time % 1000000,
- (long int) run_time / 1000000,
- (long int) run_time % 1000000);
+ (long int) (ts->start_time / 1000000),
+ (long int) (ts->start_time % 1000000),
+ (long int) (run_time / 1000000),
+ (long int) (run_time % 1000000));
}
else
printf_filtered (_("Trace started at %ld.%06ld secs.\n"),
- (long int) ts->start_time / 1000000,
- (long int) ts->start_time % 1000000);
+ (long int) (ts->start_time / 1000000),
+ (long int) (ts->start_time % 1000000));
}
else if (ts->stop_time)
printf_filtered (_("Trace stopped at %ld.%06ld secs.\n"),
- (long int) ts->stop_time / 1000000,
- (long int) ts->stop_time % 1000000);
+ (long int) (ts->stop_time / 1000000),
+ (long int) (ts->stop_time % 1000000));
/* Now report any per-tracepoint status available. */
tp_vec = all_tracepoints ();
status = target_get_trace_status (ts);
- if (status == -1 && !ts->from_file)
+ if (status == -1 && ts->filename == NULL)
{
ui_out_field_string (uiout, "supported", "0");
return;
}
- if (ts->from_file)
+ if (ts->filename != NULL)
ui_out_field_string (uiout, "supported", "file");
else if (!on_stop)
ui_out_field_string (uiout, "supported", "1");
+ if (ts->filename != NULL)
+ ui_out_field_string (uiout, "trace-file", ts->filename);
+
gdb_assert (ts->running_known);
if (ts->running)
char buf[100];
xsnprintf (buf, sizeof buf, "%ld.%06ld",
- (long int) ts->start_time / 1000000,
- (long int) ts->start_time % 1000000);
+ (long int) (ts->start_time / 1000000),
+ (long int) (ts->start_time % 1000000));
ui_out_field_string (uiout, "start-time", buf);
xsnprintf (buf, sizeof buf, "%ld.%06ld",
- (long int) ts->stop_time / 1000000,
- (long int) ts->stop_time % 1000000);
+ (long int) (ts->stop_time / 1000000),
+ (long int) (ts->stop_time % 1000000));
ui_out_field_string (uiout, "stop-time", buf);
}
}
-/* This function handles the details of what to do about an ongoing
- tracing run if the user has asked to detach or otherwise disconnect
- from the target. */
+/* Check if a trace run is ongoing. If so, and FROM_TTY, query the
+ user if she really wants to detach. */
+
void
-disconnect_tracing (int from_tty)
+query_if_trace_running (int from_tty)
{
+ if (!from_tty)
+ return;
+
/* It can happen that the target that was tracing went away on its
own, and we didn't notice. Get a status update, and if the
current target doesn't even do tracing, then assume it's not
just going to disconnect and let the target deal with it,
according to how it's been instructed previously via
disconnected-tracing. */
- if (current_trace_status ()->running && from_tty)
+ if (current_trace_status ()->running)
{
process_tracepoint_on_disconnect ();
error (_("Not confirmed."));
}
}
+}
+/* This function handles the details of what to do about an ongoing
+ tracing run if the user has asked to detach or otherwise disconnect
+ from the target. */
+
+void
+disconnect_tracing (void)
+{
/* Also we want to be out of tfind mode, otherwise things can get
confusing upon reconnection. Just use these calls instead of
full tfind_1 behavior because we're in the middle of detaching,
and there's no point to updating current stack frame etc. */
- set_current_traceframe (-1);
- set_tracepoint_num (-1);
- set_traceframe_context (NULL);
+ trace_reset_local_state ();
}
/* Worker function for the various flavors of the tfind command. */
void
tfind_1 (enum trace_find_type type, int num,
- ULONGEST addr1, ULONGEST addr2,
+ CORE_ADDR addr1, CORE_ADDR addr2,
int from_tty)
{
int target_frameno = -1, target_tracept = -1;
else
print_what = SRC_AND_LOC;
- print_stack_frame (get_selected_frame (NULL), 1, print_what);
+ print_stack_frame (get_selected_frame (NULL), 1, print_what, 1);
do_displays ();
}
}
{ /* This should only be called with a numeric argument. */
int frameno = -1;
- if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ if (current_trace_status ()->running
+ && current_trace_status ()->filename == NULL)
error (_("May not look at trace frames while trace is running."));
if (args == 0 || *args == 0)
{
CORE_ADDR pc;
- if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ if (current_trace_status ()->running
+ && current_trace_status ()->filename == NULL)
error (_("May not look at trace frames while trace is running."));
if (args == 0 || *args == 0)
int tdp;
struct tracepoint *tp;
- if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ if (current_trace_status ()->running
+ && current_trace_status ()->filename == NULL)
error (_("May not look at trace frames while trace is running."));
if (args == 0 || *args == 0)
struct symtab_and_line sal;
struct cleanup *old_chain;
- if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ if (current_trace_status ()->running
+ && current_trace_status ()->filename == NULL)
error (_("May not look at trace frames while trace is running."));
if (args == 0 || *args == 0)
static CORE_ADDR start, stop;
char *tmp;
- if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ if (current_trace_status ()->running
+ && current_trace_status ()->filename == NULL)
error (_("May not look at trace frames while trace is running."));
if (args == 0 || *args == 0)
if (0 != (tmp = strchr (args, ',')))
{
*tmp++ = '\0'; /* Terminate start address. */
- while (isspace ((int) *tmp))
- tmp++;
+ tmp = skip_spaces (tmp);
start = parse_and_eval_address (args);
stop = parse_and_eval_address (tmp);
}
CORE_ADDR start, stop;
char *tmp;
- if (current_trace_status ()->running && !current_trace_status ()->from_file)
+ if (current_trace_status ()->running
+ && current_trace_status ()->filename == NULL)
error (_("May not look at trace frames while trace is running."));
if (args == 0 || *args == 0)
if (0 != (tmp = strchr (args, ',')))
{
*tmp++ = '\0'; /* Terminate start address. */
- while (isspace ((int) *tmp))
- tmp++;
+ tmp = skip_spaces (tmp);
start = parse_and_eval_address (args);
stop = parse_and_eval_address (tmp);
}
gdbarch = get_objfile_arch (SYMBOL_SYMTAB (sym)->objfile);
printf_filtered ("Symbol %s is ", symname);
- switch (SYMBOL_CLASS (sym))
+
+ if (SYMBOL_COMPUTED_OPS (sym) != NULL)
+ SYMBOL_COMPUTED_OPS (sym)->describe_location (sym,
+ BLOCK_START (block),
+ gdb_stdout);
+ else
{
- default:
- case LOC_UNDEF: /* Messed up symbol? */
- printf_filtered ("a bogus symbol, class %d.\n",
- SYMBOL_CLASS (sym));
- count--; /* Don't count this one. */
- continue;
- case LOC_CONST:
- printf_filtered ("a constant with value %s (%s)",
- plongest (SYMBOL_VALUE (sym)),
- hex_string (SYMBOL_VALUE (sym)));
- break;
- case LOC_CONST_BYTES:
- printf_filtered ("constant bytes: ");
- if (SYMBOL_TYPE (sym))
- for (j = 0; j < TYPE_LENGTH (SYMBOL_TYPE (sym)); j++)
- fprintf_filtered (gdb_stdout, " %02x",
- (unsigned) SYMBOL_VALUE_BYTES (sym)[j]);
- break;
- case LOC_STATIC:
- printf_filtered ("in static storage at address ");
- printf_filtered ("%s", paddress (gdbarch,
- SYMBOL_VALUE_ADDRESS (sym)));
- break;
- case LOC_REGISTER:
- /* GDBARCH is the architecture associated with the objfile
- the symbol is defined in; the target architecture may be
- different, and may provide additional registers. However,
- we do not know the target architecture at this point.
- We assume the objfile architecture will contain all the
- standard registers that occur in debug info in that
- objfile. */
- regno = SYMBOL_REGISTER_OPS (sym)->register_number (sym,
- gdbarch);
-
- if (SYMBOL_IS_ARGUMENT (sym))
- printf_filtered ("an argument in register $%s",
- gdbarch_register_name (gdbarch, regno));
- else
- printf_filtered ("a local variable in register $%s",
- gdbarch_register_name (gdbarch, regno));
- break;
- case LOC_ARG:
- printf_filtered ("an argument at stack/frame offset %s",
- plongest (SYMBOL_VALUE (sym)));
- break;
- case LOC_LOCAL:
- printf_filtered ("a local variable at frame offset %s",
- plongest (SYMBOL_VALUE (sym)));
- break;
- case LOC_REF_ARG:
- printf_filtered ("a reference argument at offset %s",
- plongest (SYMBOL_VALUE (sym)));
- break;
- case LOC_REGPARM_ADDR:
- /* Note comment at LOC_REGISTER. */
- regno = SYMBOL_REGISTER_OPS (sym)->register_number (sym,
- gdbarch);
- printf_filtered ("the address of an argument, in register $%s",
- gdbarch_register_name (gdbarch, regno));
- break;
- case LOC_TYPEDEF:
- printf_filtered ("a typedef.\n");
- continue;
- case LOC_LABEL:
- printf_filtered ("a label at address ");
- printf_filtered ("%s", paddress (gdbarch,
- SYMBOL_VALUE_ADDRESS (sym)));
- break;
- case LOC_BLOCK:
- printf_filtered ("a function at address ");
- printf_filtered ("%s",
- paddress (gdbarch, BLOCK_START (SYMBOL_BLOCK_VALUE (sym))));
- break;
- case LOC_UNRESOLVED:
- msym = lookup_minimal_symbol (SYMBOL_LINKAGE_NAME (sym),
- NULL, NULL);
- if (msym == NULL)
- printf_filtered ("Unresolved Static");
- else
+ switch (SYMBOL_CLASS (sym))
{
- printf_filtered ("static storage at address ");
+ default:
+ case LOC_UNDEF: /* Messed up symbol? */
+ printf_filtered ("a bogus symbol, class %d.\n",
+ SYMBOL_CLASS (sym));
+ count--; /* Don't count this one. */
+ continue;
+ case LOC_CONST:
+ printf_filtered ("a constant with value %s (%s)",
+ plongest (SYMBOL_VALUE (sym)),
+ hex_string (SYMBOL_VALUE (sym)));
+ break;
+ case LOC_CONST_BYTES:
+ printf_filtered ("constant bytes: ");
+ if (SYMBOL_TYPE (sym))
+ for (j = 0; j < TYPE_LENGTH (SYMBOL_TYPE (sym)); j++)
+ fprintf_filtered (gdb_stdout, " %02x",
+ (unsigned) SYMBOL_VALUE_BYTES (sym)[j]);
+ break;
+ case LOC_STATIC:
+ printf_filtered ("in static storage at address ");
+ printf_filtered ("%s", paddress (gdbarch,
+ SYMBOL_VALUE_ADDRESS (sym)));
+ break;
+ case LOC_REGISTER:
+ /* GDBARCH is the architecture associated with the objfile
+ the symbol is defined in; the target architecture may be
+ different, and may provide additional registers. However,
+ we do not know the target architecture at this point.
+ We assume the objfile architecture will contain all the
+ standard registers that occur in debug info in that
+ objfile. */
+ regno = SYMBOL_REGISTER_OPS (sym)->register_number (sym,
+ gdbarch);
+
+ if (SYMBOL_IS_ARGUMENT (sym))
+ printf_filtered ("an argument in register $%s",
+ gdbarch_register_name (gdbarch, regno));
+ else
+ printf_filtered ("a local variable in register $%s",
+ gdbarch_register_name (gdbarch, regno));
+ break;
+ case LOC_ARG:
+ printf_filtered ("an argument at stack/frame offset %s",
+ plongest (SYMBOL_VALUE (sym)));
+ break;
+ case LOC_LOCAL:
+ printf_filtered ("a local variable at frame offset %s",
+ plongest (SYMBOL_VALUE (sym)));
+ break;
+ case LOC_REF_ARG:
+ printf_filtered ("a reference argument at offset %s",
+ plongest (SYMBOL_VALUE (sym)));
+ break;
+ case LOC_REGPARM_ADDR:
+ /* Note comment at LOC_REGISTER. */
+ regno = SYMBOL_REGISTER_OPS (sym)->register_number (sym,
+ gdbarch);
+ printf_filtered ("the address of an argument, in register $%s",
+ gdbarch_register_name (gdbarch, regno));
+ break;
+ case LOC_TYPEDEF:
+ printf_filtered ("a typedef.\n");
+ continue;
+ case LOC_LABEL:
+ printf_filtered ("a label at address ");
+ printf_filtered ("%s", paddress (gdbarch,
+ SYMBOL_VALUE_ADDRESS (sym)));
+ break;
+ case LOC_BLOCK:
+ printf_filtered ("a function at address ");
printf_filtered ("%s",
- paddress (gdbarch, SYMBOL_VALUE_ADDRESS (msym)));
+ paddress (gdbarch, BLOCK_START (SYMBOL_BLOCK_VALUE (sym))));
+ break;
+ case LOC_UNRESOLVED:
+ msym = lookup_minimal_symbol (SYMBOL_LINKAGE_NAME (sym),
+ NULL, NULL);
+ if (msym == NULL)
+ printf_filtered ("Unresolved Static");
+ else
+ {
+ printf_filtered ("static storage at address ");
+ printf_filtered ("%s",
+ paddress (gdbarch,
+ SYMBOL_VALUE_ADDRESS (msym)));
+ }
+ break;
+ case LOC_OPTIMIZED_OUT:
+ printf_filtered ("optimized out.\n");
+ continue;
+ case LOC_COMPUTED:
+ gdb_assert_not_reached (_("LOC_COMPUTED variable missing a method"));
}
- break;
- case LOC_OPTIMIZED_OUT:
- printf_filtered ("optimized out.\n");
- continue;
- case LOC_COMPUTED:
- SYMBOL_COMPUTED_OPS (sym)->describe_location (sym,
- BLOCK_START (block),
- gdb_stdout);
- break;
}
if (SYMBOL_TYPE (sym))
printf_filtered (", length %d.\n",
save_args);
}
-/* worker function (cleanup) */
-static void
-replace_comma (void *data)
-{
- char *comma = data;
- *comma = ',';
-}
-
-
/* Helper for trace_dump_command. Dump the action list starting at
ACTION. STEPPING_ACTIONS is true if we're iterating over the
actions of the body of a while-stepping action. STEPPING_FRAME is
int stepping_actions, int stepping_frame,
int from_tty)
{
- char *action_exp, *next_comma;
+ const char *action_exp, *next_comma;
for (; action != NULL; action = action->next)
{
QUIT; /* Allow user to bail out with ^C. */
action_exp = action->line;
- while (isspace ((int) *action_exp))
- action_exp++;
+ action_exp = skip_spaces_const (action_exp);
/* The collection actions to be done while stepping are
bracketed by the commands "while-stepping" and "end". */
STEPPING_ACTIONS should be equal. */
if (stepping_frame == stepping_actions)
{
+ char *cmd = NULL;
+ struct cleanup *old_chain
+ = make_cleanup (free_current_contents, &cmd);
+ int trace_string = 0;
+
if (*action_exp == '/')
- action_exp = decode_agent_options (action_exp);
+ action_exp = decode_agent_options (action_exp, &trace_string);
do
{ /* Repeat over a comma-separated list. */
QUIT; /* Allow user to bail out with ^C. */
if (*action_exp == ',')
action_exp++;
- while (isspace ((int) *action_exp))
- action_exp++;
+ action_exp = skip_spaces_const (action_exp);
next_comma = strchr (action_exp, ',');
args_info (NULL, from_tty);
else
{ /* variable */
- if (next_comma)
+ if (next_comma != NULL)
+ {
+ size_t len = next_comma - action_exp;
+
+ cmd = xrealloc (cmd, len + 1);
+ memcpy (cmd, action_exp, len);
+ cmd[len] = 0;
+ }
+ else
{
- make_cleanup (replace_comma, next_comma);
- *next_comma = '\0';
+ size_t len = strlen (action_exp);
+
+ cmd = xrealloc (cmd, len + 1);
+ memcpy (cmd, action_exp, len + 1);
}
- printf_filtered ("%s = ", action_exp);
- output_command (action_exp, from_tty);
+
+ printf_filtered ("%s = ", cmd);
+ output_command_const (cmd, from_tty);
printf_filtered ("\n");
}
- if (next_comma)
- *next_comma = ',';
action_exp = next_comma;
}
while (action_exp && *action_exp == ',');
+
+ do_cleanups (old_chain);
}
}
}
}
-/* The tdump command. */
+/* Return bp_location of the tracepoint associated with the current
+ traceframe. Set *STEPPING_FRAME_P to 1 if the current traceframe
+ is a stepping traceframe. */
-static void
-trace_dump_command (char *args, int from_tty)
+struct bp_location *
+get_traceframe_location (int *stepping_frame_p)
{
- struct regcache *regcache;
struct tracepoint *t;
- int stepping_frame = 0;
- struct bp_location *loc;
- char *line, *default_collect_line = NULL;
- struct command_line *actions, *default_collect_action = NULL;
- struct cleanup *old_chain = NULL;
+ struct bp_location *tloc;
+ struct regcache *regcache;
if (tracepoint_number == -1)
- {
- warning (_("No current trace frame."));
- return;
- }
+ error (_("No current trace frame."));
t = get_tracepoint (tracepoint_number);
error (_("No known tracepoint matches 'current' tracepoint #%d."),
tracepoint_number);
- printf_filtered ("Data collected at tracepoint %d, trace frame %d:\n",
- tracepoint_number, traceframe_number);
-
- /* The current frame is a trap frame if the frame PC is equal
- to the tracepoint PC. If not, then the current frame was
- collected during single-stepping. */
-
+ /* The current frame is a trap frame if the frame PC is equal to the
+ tracepoint PC. If not, then the current frame was collected
+ during single-stepping. */
regcache = get_current_regcache ();
/* If the traceframe's address matches any of the tracepoint's
locations, assume it is a direct hit rather than a while-stepping
frame. (FIXME this is not reliable, should record each frame's
type.) */
- stepping_frame = 1;
- for (loc = t->base.loc; loc; loc = loc->next)
- if (loc->address == regcache_read_pc (regcache))
- stepping_frame = 0;
+ for (tloc = t->base.loc; tloc; tloc = tloc->next)
+ if (tloc->address == regcache_read_pc (regcache))
+ {
+ *stepping_frame_p = 0;
+ return tloc;
+ }
+
+ /* If this is a stepping frame, we don't know which location
+ triggered. The first is as good (or bad) a guess as any... */
+ *stepping_frame_p = 1;
+ return t->base.loc;
+}
+
+/* Return all the actions, including default collect, of a tracepoint
+ T. It constructs cleanups into the chain, and leaves the caller to
+ handle them (call do_cleanups). */
- actions = breakpoint_commands (&t->base);
+static struct command_line *
+all_tracepoint_actions_and_cleanup (struct breakpoint *t)
+{
+ struct command_line *actions;
+
+ actions = breakpoint_commands (t);
- /* If there is a default-collect list, make up a collect command,
- prepend to the tracepoint's commands, and pass the whole mess to
- the trace dump scanner. We need to validate because
- default-collect might have been junked since the trace run. */
+ /* If there are default expressions to collect, make up a collect
+ action and prepend to the action list to encode. Note that since
+ validation is per-tracepoint (local var "xyz" might be valid for
+ one tracepoint and not another, etc), we make up the action on
+ the fly, and don't cache it. */
if (*default_collect)
{
+ struct command_line *default_collect_action;
+ char *default_collect_line;
+
default_collect_line = xstrprintf ("collect %s", default_collect);
- old_chain = make_cleanup (xfree, default_collect_line);
- line = default_collect_line;
- validate_actionline (&line, &t->base);
+ make_cleanup (xfree, default_collect_line);
+
+ validate_actionline (default_collect_line, t);
default_collect_action = xmalloc (sizeof (struct command_line));
make_cleanup (xfree, default_collect_action);
default_collect_action->next = actions;
- default_collect_action->line = line;
+ default_collect_action->line = default_collect_line;
actions = default_collect_action;
}
+ return actions;
+}
+
+/* The tdump command. */
+
+static void
+trace_dump_command (char *args, int from_tty)
+{
+ int stepping_frame = 0;
+ struct bp_location *loc;
+ struct cleanup *old_chain;
+ struct command_line *actions;
+
+ /* This throws an error is not inspecting a trace frame. */
+ loc = get_traceframe_location (&stepping_frame);
+
+ printf_filtered ("Data collected at tracepoint %d, trace frame %d:\n",
+ tracepoint_number, traceframe_number);
+
+ old_chain = make_cleanup (null_cleanup, NULL);
+
+ /* This command only makes sense for the current frame, not the
+ selected frame. */
+ make_cleanup_restore_current_thread ();
+ select_frame (get_current_frame ());
+
+ actions = all_tracepoint_actions_and_cleanup (loc->owner);
+
trace_dump_actions (actions, 0, stepping_frame, from_tty);
- if (*default_collect)
- do_cleanups (old_chain);
+ do_cleanups (old_chain);
}
/* Encode a piece of a tracepoint's source-level definition in a form
srctype, 0, (int) strlen (src));
if (strlen (buf) + strlen (src) * 2 >= buf_size)
error (_("Source string too long for buffer"));
- bin2hex (src, buf + strlen (buf), 0);
+ bin2hex ((gdb_byte *) src, buf + strlen (buf), 0);
return -1;
}
-extern int trace_regblock_size;
-
-/* Save tracepoint data to file named FILENAME. If TARGET_DOES_SAVE is
- non-zero, the save is performed on the target, otherwise GDB obtains all
- trace data and saves it locally. */
+/* Free trace file writer. */
-void
-trace_save (const char *filename, int target_does_save)
+static void
+trace_file_writer_xfree (void *arg)
{
- struct cleanup *cleanup;
+ struct trace_file_writer *writer = arg;
+
+ writer->ops->dtor (writer);
+ xfree (writer);
+}
+
+/* TFILE trace writer. */
+
+struct tfile_trace_file_writer
+{
+ struct trace_file_writer base;
+
+ /* File pointer to tfile trace file. */
+ FILE *fp;
+ /* Path name of the tfile trace file. */
char *pathname;
+};
+
+/* This is the implementation of trace_file_write_ops method
+ target_save. We just call the generic target
+ target_save_trace_data to do target-side saving. */
+
+static int
+tfile_target_save (struct trace_file_writer *self,
+ const char *filename)
+{
+ int err = target_save_trace_data (filename);
+
+ return (err >= 0);
+}
+
+/* This is the implementation of trace_file_write_ops method
+ dtor. */
+
+static void
+tfile_dtor (struct trace_file_writer *self)
+{
+ struct tfile_trace_file_writer *writer
+ = (struct tfile_trace_file_writer *) self;
+
+ xfree (writer->pathname);
+
+ if (writer->fp != NULL)
+ fclose (writer->fp);
+}
+
+/* This is the implementation of trace_file_write_ops method
+ start. It creates the trace file FILENAME and registers some
+ cleanups. */
+
+static void
+tfile_start (struct trace_file_writer *self, const char *filename)
+{
+ struct tfile_trace_file_writer *writer
+ = (struct tfile_trace_file_writer *) self;
+
+ writer->pathname = tilde_expand (filename);
+ writer->fp = gdb_fopen_cloexec (writer->pathname, "wb");
+ if (writer->fp == NULL)
+ error (_("Unable to open file '%s' for saving trace data (%s)"),
+ writer->pathname, safe_strerror (errno));
+}
+
+/* This is the implementation of trace_file_write_ops method
+ write_header. Write the TFILE header. */
+
+static void
+tfile_write_header (struct trace_file_writer *self)
+{
+ struct tfile_trace_file_writer *writer
+ = (struct tfile_trace_file_writer *) self;
+ int written;
+
+ /* Write a file header, with a high-bit-set char to indicate a
+ binary file, plus a hint as what this file is, and a version
+ number in case of future needs. */
+ written = fwrite ("\x7fTRACE0\n", 8, 1, writer->fp);
+ if (written < 1)
+ perror_with_name (writer->pathname);
+}
+
+/* This is the implementation of trace_file_write_ops method
+ write_regblock_type. Write the size of register block. */
+
+static void
+tfile_write_regblock_type (struct trace_file_writer *self, int size)
+{
+ struct tfile_trace_file_writer *writer
+ = (struct tfile_trace_file_writer *) self;
+
+ fprintf (writer->fp, "R %x\n", size);
+}
+
+/* This is the implementation of trace_file_write_ops method
+ write_status. */
+
+static void
+tfile_write_status (struct trace_file_writer *self,
+ struct trace_status *ts)
+{
+ struct tfile_trace_file_writer *writer
+ = (struct tfile_trace_file_writer *) self;
+
+ fprintf (writer->fp, "status %c;%s",
+ (ts->running ? '1' : '0'), stop_reason_names[ts->stop_reason]);
+ if (ts->stop_reason == tracepoint_error
+ || ts->stop_reason == tstop_command)
+ {
+ char *buf = (char *) alloca (strlen (ts->stop_desc) * 2 + 1);
+
+ bin2hex ((gdb_byte *) ts->stop_desc, buf, 0);
+ fprintf (writer->fp, ":%s", buf);
+ }
+ fprintf (writer->fp, ":%x", ts->stopping_tracepoint);
+ if (ts->traceframe_count >= 0)
+ fprintf (writer->fp, ";tframes:%x", ts->traceframe_count);
+ if (ts->traceframes_created >= 0)
+ fprintf (writer->fp, ";tcreated:%x", ts->traceframes_created);
+ if (ts->buffer_free >= 0)
+ fprintf (writer->fp, ";tfree:%x", ts->buffer_free);
+ if (ts->buffer_size >= 0)
+ fprintf (writer->fp, ";tsize:%x", ts->buffer_size);
+ if (ts->disconnected_tracing)
+ fprintf (writer->fp, ";disconn:%x", ts->disconnected_tracing);
+ if (ts->circular_buffer)
+ fprintf (writer->fp, ";circular:%x", ts->circular_buffer);
+ if (ts->start_time)
+ {
+ fprintf (writer->fp, ";starttime:%s",
+ phex_nz (ts->start_time, sizeof (ts->start_time)));
+ }
+ if (ts->stop_time)
+ {
+ fprintf (writer->fp, ";stoptime:%s",
+ phex_nz (ts->stop_time, sizeof (ts->stop_time)));
+ }
+ if (ts->notes != NULL)
+ {
+ char *buf = (char *) alloca (strlen (ts->notes) * 2 + 1);
+
+ bin2hex ((gdb_byte *) ts->notes, buf, 0);
+ fprintf (writer->fp, ";notes:%s", buf);
+ }
+ if (ts->user_name != NULL)
+ {
+ char *buf = (char *) alloca (strlen (ts->user_name) * 2 + 1);
+
+ bin2hex ((gdb_byte *) ts->user_name, buf, 0);
+ fprintf (writer->fp, ";username:%s", buf);
+ }
+ fprintf (writer->fp, "\n");
+}
+
+/* This is the implementation of trace_file_write_ops method
+ write_uploaded_tsv. */
+
+static void
+tfile_write_uploaded_tsv (struct trace_file_writer *self,
+ struct uploaded_tsv *utsv)
+{
+ char *buf = "";
+ struct tfile_trace_file_writer *writer
+ = (struct tfile_trace_file_writer *) self;
+
+ if (utsv->name)
+ {
+ buf = (char *) xmalloc (strlen (utsv->name) * 2 + 1);
+ bin2hex ((gdb_byte *) (utsv->name), buf, 0);
+ }
+
+ fprintf (writer->fp, "tsv %x:%s:%x:%s\n",
+ utsv->number, phex_nz (utsv->initial_value, 8),
+ utsv->builtin, buf);
+
+ if (utsv->name)
+ xfree (buf);
+}
+
+#define MAX_TRACE_UPLOAD 2000
+
+/* This is the implementation of trace_file_write_ops method
+ write_uploaded_tp. */
+
+static void
+tfile_write_uploaded_tp (struct trace_file_writer *self,
+ struct uploaded_tp *utp)
+{
+ struct tfile_trace_file_writer *writer
+ = (struct tfile_trace_file_writer *) self;
+ int a;
+ char *act;
+ char buf[MAX_TRACE_UPLOAD];
+
+ fprintf (writer->fp, "tp T%x:%s:%c:%x:%x",
+ utp->number, phex_nz (utp->addr, sizeof (utp->addr)),
+ (utp->enabled ? 'E' : 'D'), utp->step, utp->pass);
+ if (utp->type == bp_fast_tracepoint)
+ fprintf (writer->fp, ":F%x", utp->orig_size);
+ if (utp->cond)
+ fprintf (writer->fp,
+ ":X%x,%s", (unsigned int) strlen (utp->cond) / 2,
+ utp->cond);
+ fprintf (writer->fp, "\n");
+ for (a = 0; VEC_iterate (char_ptr, utp->actions, a, act); ++a)
+ fprintf (writer->fp, "tp A%x:%s:%s\n",
+ utp->number, phex_nz (utp->addr, sizeof (utp->addr)), act);
+ for (a = 0; VEC_iterate (char_ptr, utp->step_actions, a, act); ++a)
+ fprintf (writer->fp, "tp S%x:%s:%s\n",
+ utp->number, phex_nz (utp->addr, sizeof (utp->addr)), act);
+ if (utp->at_string)
+ {
+ encode_source_string (utp->number, utp->addr,
+ "at", utp->at_string, buf, MAX_TRACE_UPLOAD);
+ fprintf (writer->fp, "tp Z%s\n", buf);
+ }
+ if (utp->cond_string)
+ {
+ encode_source_string (utp->number, utp->addr,
+ "cond", utp->cond_string,
+ buf, MAX_TRACE_UPLOAD);
+ fprintf (writer->fp, "tp Z%s\n", buf);
+ }
+ for (a = 0; VEC_iterate (char_ptr, utp->cmd_strings, a, act); ++a)
+ {
+ encode_source_string (utp->number, utp->addr, "cmd", act,
+ buf, MAX_TRACE_UPLOAD);
+ fprintf (writer->fp, "tp Z%s\n", buf);
+ }
+ fprintf (writer->fp, "tp V%x:%s:%x:%s\n",
+ utp->number, phex_nz (utp->addr, sizeof (utp->addr)),
+ utp->hit_count,
+ phex_nz (utp->traceframe_usage,
+ sizeof (utp->traceframe_usage)));
+}
+
+/* This is the implementation of trace_file_write_ops method
+ write_definition_end. */
+
+static void
+tfile_write_definition_end (struct trace_file_writer *self)
+{
+ struct tfile_trace_file_writer *writer
+ = (struct tfile_trace_file_writer *) self;
+
+ fprintf (writer->fp, "\n");
+}
+
+/* This is the implementation of trace_file_write_ops method
+ write_raw_data. */
+
+static void
+tfile_write_raw_data (struct trace_file_writer *self, gdb_byte *buf,
+ LONGEST len)
+{
+ struct tfile_trace_file_writer *writer
+ = (struct tfile_trace_file_writer *) self;
+
+ if (fwrite (buf, len, 1, writer->fp) < 1)
+ perror_with_name (writer->pathname);
+}
+
+/* This is the implementation of trace_file_write_ops method
+ end. */
+
+static void
+tfile_end (struct trace_file_writer *self)
+{
+ struct tfile_trace_file_writer *writer
+ = (struct tfile_trace_file_writer *) self;
+ uint32_t gotten = 0;
+
+ /* Mark the end of trace data. */
+ if (fwrite (&gotten, 4, 1, writer->fp) < 1)
+ perror_with_name (writer->pathname);
+}
+
+/* Operations to write trace buffers into TFILE format. */
+
+static const struct trace_file_write_ops tfile_write_ops =
+{
+ tfile_dtor,
+ tfile_target_save,
+ tfile_start,
+ tfile_write_header,
+ tfile_write_regblock_type,
+ tfile_write_status,
+ tfile_write_uploaded_tsv,
+ tfile_write_uploaded_tp,
+ tfile_write_definition_end,
+ tfile_write_raw_data,
+ NULL,
+ tfile_end,
+};
+
+/* Helper macros. */
+
+#define TRACE_WRITE_R_BLOCK(writer, buf, size) \
+ writer->ops->frame_ops->write_r_block ((writer), (buf), (size))
+#define TRACE_WRITE_M_BLOCK_HEADER(writer, addr, size) \
+ writer->ops->frame_ops->write_m_block_header ((writer), (addr), \
+ (size))
+#define TRACE_WRITE_M_BLOCK_MEMORY(writer, buf, size) \
+ writer->ops->frame_ops->write_m_block_memory ((writer), (buf), \
+ (size))
+#define TRACE_WRITE_V_BLOCK(writer, num, val) \
+ writer->ops->frame_ops->write_v_block ((writer), (num), (val))
+
+/* Save tracepoint data to file named FILENAME through WRITER. WRITER
+ determines the trace file format. If TARGET_DOES_SAVE is non-zero,
+ the save is performed on the target, otherwise GDB obtains all trace
+ data and saves it locally. */
+
+static void
+trace_save (const char *filename, struct trace_file_writer *writer,
+ int target_does_save)
+{
struct trace_status *ts = current_trace_status ();
- int err, status;
- FILE *fp;
+ int status;
struct uploaded_tp *uploaded_tps = NULL, *utp;
struct uploaded_tsv *uploaded_tsvs = NULL, *utsv;
- int a;
- char *act;
- LONGEST gotten = 0;
+
ULONGEST offset = 0;
-#define MAX_TRACE_UPLOAD 2000
gdb_byte buf[MAX_TRACE_UPLOAD];
+#define MAX_TRACE_UPLOAD 2000
int written;
+ enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch ());
/* If the target is to save the data to a file on its own, then just
send the command and be done with it. */
if (target_does_save)
{
- err = target_save_trace_data (filename);
- if (err < 0)
+ if (!writer->ops->target_save (writer, filename))
error (_("Target failed to save trace data to '%s'."),
filename);
return;
target is losing, we can get out without touching files. */
status = target_get_trace_status (ts);
- pathname = tilde_expand (filename);
- cleanup = make_cleanup (xfree, pathname);
-
- fp = fopen (pathname, "wb");
- if (!fp)
- error (_("Unable to open file '%s' for saving trace data (%s)"),
- filename, safe_strerror (errno));
- make_cleanup_fclose (fp);
+ writer->ops->start (writer, filename);
- /* Write a file header, with a high-bit-set char to indicate a
- binary file, plus a hint as what this file is, and a version
- number in case of future needs. */
- written = fwrite ("\x7fTRACE0\n", 8, 1, fp);
- if (written < 1)
- perror_with_name (pathname);
+ writer->ops->write_header (writer);
/* Write descriptive info. */
/* Write out the size of a register block. */
- fprintf (fp, "R %x\n", trace_regblock_size);
+ writer->ops->write_regblock_type (writer, trace_regblock_size);
/* Write out status of the tracing run (aka "tstatus" info). */
- fprintf (fp, "status %c;%s",
- (ts->running ? '1' : '0'), stop_reason_names[ts->stop_reason]);
- if (ts->stop_reason == tracepoint_error)
- {
- char *buf = (char *) alloca (strlen (ts->stop_desc) * 2 + 1);
-
- bin2hex ((gdb_byte *) ts->stop_desc, buf, 0);
- fprintf (fp, ":%s", buf);
- }
- fprintf (fp, ":%x", ts->stopping_tracepoint);
- if (ts->traceframe_count >= 0)
- fprintf (fp, ";tframes:%x", ts->traceframe_count);
- if (ts->traceframes_created >= 0)
- fprintf (fp, ";tcreated:%x", ts->traceframes_created);
- if (ts->buffer_free >= 0)
- fprintf (fp, ";tfree:%x", ts->buffer_free);
- if (ts->buffer_size >= 0)
- fprintf (fp, ";tsize:%x", ts->buffer_size);
- if (ts->disconnected_tracing)
- fprintf (fp, ";disconn:%x", ts->disconnected_tracing);
- if (ts->circular_buffer)
- fprintf (fp, ";circular:%x", ts->circular_buffer);
- fprintf (fp, "\n");
+ writer->ops->write_status (writer, ts);
/* Note that we want to upload tracepoints and save those, rather
than simply writing out the local ones, because the user may have
target_upload_trace_state_variables (&uploaded_tsvs);
for (utsv = uploaded_tsvs; utsv; utsv = utsv->next)
- {
- char *buf = "";
-
- if (utsv->name)
- {
- buf = (char *) xmalloc (strlen (utsv->name) * 2 + 1);
- bin2hex ((gdb_byte *) (utsv->name), buf, 0);
- }
-
- fprintf (fp, "tsv %x:%s:%x:%s\n",
- utsv->number, phex_nz (utsv->initial_value, 8),
- utsv->builtin, buf);
-
- if (utsv->name)
- xfree (buf);
- }
+ writer->ops->write_uploaded_tsv (writer, utsv);
free_uploaded_tsvs (&uploaded_tsvs);
target_get_tracepoint_status (NULL, utp);
for (utp = uploaded_tps; utp; utp = utp->next)
+ writer->ops->write_uploaded_tp (writer, utp);
+
+ free_uploaded_tps (&uploaded_tps);
+
+ /* Mark the end of the definition section. */
+ writer->ops->write_definition_end (writer);
+
+ /* Get and write the trace data proper. */
+ while (1)
{
- fprintf (fp, "tp T%x:%s:%c:%x:%x",
- utp->number, phex_nz (utp->addr, sizeof (utp->addr)),
- (utp->enabled ? 'E' : 'D'), utp->step, utp->pass);
- if (utp->type == bp_fast_tracepoint)
- fprintf (fp, ":F%x", utp->orig_size);
- if (utp->cond)
- fprintf (fp, ":X%x,%s", (unsigned int) strlen (utp->cond) / 2,
- utp->cond);
- fprintf (fp, "\n");
- for (a = 0; VEC_iterate (char_ptr, utp->actions, a, act); ++a)
- fprintf (fp, "tp A%x:%s:%s\n",
- utp->number, phex_nz (utp->addr, sizeof (utp->addr)), act);
- for (a = 0; VEC_iterate (char_ptr, utp->step_actions, a, act); ++a)
- fprintf (fp, "tp S%x:%s:%s\n",
- utp->number, phex_nz (utp->addr, sizeof (utp->addr)), act);
- if (utp->at_string)
- {
- encode_source_string (utp->number, utp->addr,
- "at", utp->at_string, buf, MAX_TRACE_UPLOAD);
- fprintf (fp, "tp Z%s\n", buf);
- }
- if (utp->cond_string)
+ LONGEST gotten = 0;
+
+ /* The writer supports writing the contents of trace buffer
+ directly to trace file. Don't parse the contents of trace
+ buffer. */
+ if (writer->ops->write_trace_buffer != NULL)
{
- encode_source_string (utp->number, utp->addr,
- "cond", utp->cond_string,
- buf, MAX_TRACE_UPLOAD);
- fprintf (fp, "tp Z%s\n", buf);
+ /* We ask for big blocks, in the hopes of efficiency, but
+ will take less if the target has packet size limitations
+ or some such. */
+ gotten = target_get_raw_trace_data (buf, offset,
+ MAX_TRACE_UPLOAD);
+ if (gotten < 0)
+ error (_("Failure to get requested trace buffer data"));
+ /* No more data is forthcoming, we're done. */
+ if (gotten == 0)
+ break;
+
+ writer->ops->write_trace_buffer (writer, buf, gotten);
+
+ offset += gotten;
}
- for (a = 0; VEC_iterate (char_ptr, utp->cmd_strings, a, act); ++a)
+ else
{
- encode_source_string (utp->number, utp->addr, "cmd", act,
- buf, MAX_TRACE_UPLOAD);
- fprintf (fp, "tp Z%s\n", buf);
+ uint16_t tp_num;
+ uint32_t tf_size;
+ /* Parse the trace buffers according to how data are stored
+ in trace buffer in GDBserver. */
+
+ gotten = target_get_raw_trace_data (buf, offset, 6);
+
+ if (gotten == 0)
+ break;
+
+ /* Read the first six bytes in, which is the tracepoint
+ number and trace frame size. */
+ tp_num = (uint16_t)
+ extract_unsigned_integer (&buf[0], 2, byte_order);
+
+ tf_size = (uint32_t)
+ extract_unsigned_integer (&buf[2], 4, byte_order);
+
+ writer->ops->frame_ops->start (writer, tp_num);
+ gotten = 6;
+
+ if (tf_size > 0)
+ {
+ unsigned int block;
+
+ offset += 6;
+
+ for (block = 0; block < tf_size; )
+ {
+ gdb_byte block_type;
+
+ /* We'll fetch one block each time, in order to
+ handle the extremely large 'M' block. We first
+ fetch one byte to get the type of the block. */
+ gotten = target_get_raw_trace_data (buf, offset, 1);
+ if (gotten < 1)
+ error (_("Failure to get requested trace buffer data"));
+
+ gotten = 1;
+ block += 1;
+ offset += 1;
+
+ block_type = buf[0];
+ switch (block_type)
+ {
+ case 'R':
+ gotten
+ = target_get_raw_trace_data (buf, offset,
+ trace_regblock_size);
+ if (gotten < trace_regblock_size)
+ error (_("Failure to get requested trace"
+ " buffer data"));
+
+ TRACE_WRITE_R_BLOCK (writer, buf,
+ trace_regblock_size);
+ break;
+ case 'M':
+ {
+ unsigned short mlen;
+ ULONGEST addr;
+ LONGEST t;
+ int j;
+
+ t = target_get_raw_trace_data (buf,offset, 10);
+ if (t < 10)
+ error (_("Failure to get requested trace"
+ " buffer data"));
+
+ offset += 10;
+ block += 10;
+
+ gotten = 0;
+ addr = (ULONGEST)
+ extract_unsigned_integer (buf, 8,
+ byte_order);
+ mlen = (unsigned short)
+ extract_unsigned_integer (&buf[8], 2,
+ byte_order);
+
+ TRACE_WRITE_M_BLOCK_HEADER (writer, addr,
+ mlen);
+
+ /* The memory contents in 'M' block may be
+ very large. Fetch the data from the target
+ and write them into file one by one. */
+ for (j = 0; j < mlen; )
+ {
+ unsigned int read_length;
+
+ if (mlen - j > MAX_TRACE_UPLOAD)
+ read_length = MAX_TRACE_UPLOAD;
+ else
+ read_length = mlen - j;
+
+ t = target_get_raw_trace_data (buf,
+ offset + j,
+ read_length);
+ if (t < read_length)
+ error (_("Failure to get requested"
+ " trace buffer data"));
+
+ TRACE_WRITE_M_BLOCK_MEMORY (writer, buf,
+ read_length);
+
+ j += read_length;
+ gotten += read_length;
+ }
+
+ break;
+ }
+ case 'V':
+ {
+ int vnum;
+ LONGEST val;
+
+ gotten
+ = target_get_raw_trace_data (buf, offset,
+ 12);
+ if (gotten < 12)
+ error (_("Failure to get requested"
+ " trace buffer data"));
+
+ vnum = (int) extract_signed_integer (buf,
+ 4,
+ byte_order);
+ val
+ = extract_signed_integer (&buf[4], 8,
+ byte_order);
+
+ TRACE_WRITE_V_BLOCK (writer, vnum, val);
+ }
+ break;
+ default:
+ error (_("Unknown block type '%c' (0x%x) in"
+ " trace frame"),
+ block_type, block_type);
+ }
+
+ block += gotten;
+ offset += gotten;
+ }
+ }
+ else
+ offset += gotten;
+
+ writer->ops->frame_ops->end (writer);
}
- fprintf (fp, "tp V%x:%s:%x:%s\n",
- utp->number, phex_nz (utp->addr, sizeof (utp->addr)),
- utp->hit_count,
- phex_nz (utp->traceframe_usage,
- sizeof (utp->traceframe_usage)));
}
- free_uploaded_tps (&uploaded_tps);
+ writer->ops->end (writer);
+}
- /* Mark the end of the definition section. */
- fprintf (fp, "\n");
+/* Return a trace writer for TFILE format. */
- /* Get and write the trace data proper. We ask for big blocks, in
- the hopes of efficiency, but will take less if the target has
- packet size limitations or some such. */
- while (1)
- {
- gotten = target_get_raw_trace_data (buf, offset, MAX_TRACE_UPLOAD);
- if (gotten < 0)
- error (_("Failure to get requested trace buffer data"));
- /* No more data is forthcoming, we're done. */
- if (gotten == 0)
- break;
- written = fwrite (buf, gotten, 1, fp);
- if (written < 1)
- perror_with_name (pathname);
- offset += gotten;
- }
+static struct trace_file_writer *
+tfile_trace_file_writer_new (void)
+{
+ struct tfile_trace_file_writer *writer
+ = xmalloc (sizeof (struct tfile_trace_file_writer));
- /* Mark the end of trace data. (We know that gotten is 0 at this point.) */
- written = fwrite (&gotten, 4, 1, fp);
- if (written < 1)
- perror_with_name (pathname);
+ writer->base.ops = &tfile_write_ops;
+ writer->fp = NULL;
+ writer->pathname = NULL;
- do_cleanups (cleanup);
+ return (struct trace_file_writer *) writer;
}
static void
char **argv;
char *filename = NULL;
struct cleanup *back_to;
+ int generate_ctf = 0;
+ struct trace_file_writer *writer = NULL;
if (args == NULL)
error_no_arg (_("file in which to save trace data"));
{
if (strcmp (*argv, "-r") == 0)
target_does_save = 1;
+ if (strcmp (*argv, "-ctf") == 0)
+ generate_ctf = 1;
else if (**argv == '-')
error (_("unknown option `%s'"), *argv);
else
if (!filename)
error_no_arg (_("file in which to save trace data"));
- trace_save (filename, target_does_save);
+ if (generate_ctf)
+ writer = ctf_trace_file_writer_new ();
+ else
+ writer = tfile_trace_file_writer_new ();
+
+ make_cleanup (trace_file_writer_xfree, writer);
+
+ trace_save (filename, writer, target_does_save);
if (from_tty)
- printf_filtered (_("Trace data saved to file '%s'.\n"), filename);
+ printf_filtered (_("Trace data saved to %s '%s'.\n"),
+ generate_ctf ? "directory" : "file", filename);
do_cleanups (back_to);
}
+/* Save the trace data to file FILENAME of tfile format. */
+
+void
+trace_save_tfile (const char *filename, int target_does_save)
+{
+ struct trace_file_writer *writer;
+ struct cleanup *back_to;
+
+ writer = tfile_trace_file_writer_new ();
+ back_to = make_cleanup (trace_file_writer_xfree, writer);
+ trace_save (filename, writer, target_does_save);
+ do_cleanups (back_to);
+}
+
+/* Save the trace data to dir DIRNAME of ctf format. */
+
+void
+trace_save_ctf (const char *dirname, int target_does_save)
+{
+ struct trace_file_writer *writer;
+ struct cleanup *back_to;
+
+ writer = ctf_trace_file_writer_new ();
+ back_to = make_cleanup (trace_file_writer_xfree, writer);
+
+ trace_save (dirname, writer, target_does_save);
+ do_cleanups (back_to);
+}
+
/* Tell the target what to do with an ongoing tracing run if GDB
disconnects for some reason. */
target_set_circular_trace_buffer (circular_trace_buffer);
}
+static void
+set_trace_buffer_size (char *args, int from_tty,
+ struct cmd_list_element *c)
+{
+ target_set_trace_buffer_size (trace_buffer_size);
+}
+
static void
set_trace_user (char *args, int from_tty,
struct cmd_list_element *c)
return traceframe_number;
}
+int
+get_tracepoint_number (void)
+{
+ return tracepoint_number;
+}
+
/* Make the traceframe NUM be the current trace frame. Does nothing
if NUM is already current. */
/* Given a number and address, return an uploaded tracepoint with that
number, creating if necessary. */
-static struct uploaded_tsv *
+struct uploaded_tsv *
get_uploaded_tsv (int num, struct uploaded_tsv **utsvp)
{
struct uploaded_tsv *utsv;
int scratch_chan;
char header[TRACE_HEADER_SIZE];
char linebuf[1000]; /* Should be max remote packet size or so. */
- char byte;
+ gdb_byte byte;
int bytes, i;
struct trace_status *ts;
struct uploaded_tp *uploaded_tps = NULL;
flags = O_BINARY | O_LARGEFILE;
flags |= O_RDONLY;
- scratch_chan = open (filename, flags, 0);
+ scratch_chan = gdb_open_cloexec (filename, flags, 0);
if (scratch_chan < 0)
perror_with_name (filename);
trace_regblock_size = 0;
ts = current_trace_status ();
- /* We know we're working with a file. */
- ts->from_file = 1;
+ /* We know we're working with a file. Record its name. */
+ ts->filename = trace_filename;
/* Set defaults in case there is no status line. */
ts->running_known = 0;
ts->stop_reason = trace_stop_reason_unknown;
}
if (ex.reason < 0)
{
- /* Pop the partially set up target. */
- pop_target ();
+ /* Remove the partially set up target. */
+ unpush_target (&tfile_ops);
throw_exception (ex);
}
- inferior_appeared (current_inferior (), TFILE_PID);
- inferior_ptid = pid_to_ptid (TFILE_PID);
- add_thread_silent (inferior_ptid);
-
if (ts->traceframe_count <= 0)
warning (_("No traceframes present in this file."));
merge_uploaded_trace_state_variables (&uploaded_tsvs);
merge_uploaded_tracepoints (&uploaded_tps);
-
- post_create_inferior (&tfile_ops, from_tty);
}
/* Interpret the given line from the definitions part of the trace
file. */
static void
-tfile_interp_line (char *line,
- struct uploaded_tp **utpp, struct uploaded_tsv **utsvp)
+tfile_interp_line (char *line, struct uploaded_tp **utpp,
+ struct uploaded_tsv **utsvp)
{
char *p = line;
else if (p2 != p1)
{
ts->stop_desc = xmalloc (strlen (line));
- end = hex2bin (p1, ts->stop_desc, (p2 - p1) / 2);
+ end = hex2bin (p1, (gdb_byte *) ts->stop_desc, (p2 - p1) / 2);
ts->stop_desc[end] = '\0';
}
else
if (p2 != p1)
{
ts->stop_desc = xmalloc ((p2 - p1) / 2 + 1);
- end = hex2bin (p1, ts->stop_desc, (p2 - p1) / 2);
+ end = hex2bin (p1, (gdb_byte *) ts->stop_desc, (p2 - p1) / 2);
ts->stop_desc[end] = '\0';
}
else
{
++p1;
ts->user_name = xmalloc (strlen (p) / 2);
- end = hex2bin (p1, ts->user_name, (p3 - p1) / 2);
+ end = hex2bin (p1, (gdb_byte *) ts->user_name, (p3 - p1) / 2);
ts->user_name[end] = '\0';
p = p3;
}
{
++p1;
ts->notes = xmalloc (strlen (p) / 2);
- end = hex2bin (p1, ts->notes, (p3 - p1) / 2);
+ end = hex2bin (p1, (gdb_byte *) ts->notes, (p3 - p1) / 2);
ts->notes[end] = '\0';
p = p3;
}
/* Close the trace file and generally clean up. */
static void
-tfile_close (int quitting)
+tfile_close (void)
{
int pid;
if (trace_fd < 0)
return;
- pid = ptid_get_pid (inferior_ptid);
- inferior_ptid = null_ptid; /* Avoid confusion from thread stuff. */
- exit_inferior_silent (pid);
-
close (trace_fd);
trace_fd = -1;
xfree (trace_filename);
trace_filename = NULL;
+
+ trace_reset_local_state ();
}
static void
tfile_files_info (struct target_ops *t)
{
- /* (it would be useful to mention the name of the file). */
- printf_filtered ("Looking at a trace file.\n");
+ printf_filtered ("\t`%s'\n", trace_filename);
}
/* The trace status for a file is that tracing can never be run. */
value of a collected PC register, but if not available, we
improvise. */
-static ULONGEST
+static CORE_ADDR
tfile_get_traceframe_address (off_t tframe_offset)
{
- ULONGEST addr = 0;
+ CORE_ADDR addr = 0;
short tpnum;
struct tracepoint *tp;
off_t saved_offset = cur_offset;
static int
tfile_trace_find (enum trace_find_type type, int num,
- ULONGEST addr1, ULONGEST addr2, int *tpp)
+ CORE_ADDR addr1, CORE_ADDR addr2, int *tpp)
{
short tpnum;
int tfnum = 0, found = 0;
unsigned int data_size;
struct tracepoint *tp;
off_t offset, tframe_offset;
- ULONGEST tfaddr;
+ CORE_ADDR tfaddr;
if (num == -1)
{
((gdb_byte *) &data_size, 4,
gdbarch_byte_order (target_gdbarch ()));
offset += 4;
- switch (type)
+
+ if (type == tfind_number)
{
- case tfind_number:
+ /* Looking for a specific trace frame. */
if (tfnum == num)
found = 1;
- break;
- case tfind_pc:
- tfaddr = tfile_get_traceframe_address (tframe_offset);
- if (tfaddr == addr1)
- found = 1;
- break;
- case tfind_tp:
- tp = get_tracepoint (num);
- if (tp && tpnum == tp->number_on_target)
- found = 1;
- break;
- case tfind_range:
- tfaddr = tfile_get_traceframe_address (tframe_offset);
- if (addr1 <= tfaddr && tfaddr <= addr2)
- found = 1;
- break;
- case tfind_outside:
- tfaddr = tfile_get_traceframe_address (tframe_offset);
- if (!(addr1 <= tfaddr && tfaddr <= addr2))
- found = 1;
- break;
- default:
- internal_error (__FILE__, __LINE__, _("unknown tfind type"));
}
+ else
+ {
+ /* Start from the _next_ trace frame. */
+ if (tfnum > traceframe_number)
+ {
+ switch (type)
+ {
+ case tfind_pc:
+ tfaddr = tfile_get_traceframe_address (tframe_offset);
+ if (tfaddr == addr1)
+ found = 1;
+ break;
+ case tfind_tp:
+ tp = get_tracepoint (num);
+ if (tp && tpnum == tp->number_on_target)
+ found = 1;
+ break;
+ case tfind_range:
+ tfaddr = tfile_get_traceframe_address (tframe_offset);
+ if (addr1 <= tfaddr && tfaddr <= addr2)
+ found = 1;
+ break;
+ case tfind_outside:
+ tfaddr = tfile_get_traceframe_address (tframe_offset);
+ if (!(addr1 <= tfaddr && tfaddr <= addr2))
+ found = 1;
+ break;
+ default:
+ internal_error (__FILE__, __LINE__, _("unknown tfind type"));
+ }
+ }
+ }
+
if (found)
{
if (tpp)
unsigned short mlen;
char block_type;
- tfile_read (&block_type, 1);
+ tfile_read ((gdb_byte *) &block_type, 1);
++pos;
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
int offset, regn, regsize, pc_regno;
- char *regs;
+ gdb_byte *regs;
/* An uninitialized reg size says we're not going to be
successful at getting register blocks. */
tfile_get_trace_state_variable_value (int tsvnum, LONGEST *val)
{
int pos;
+ int found = 0;
+ /* Iterate over blocks in current frame and find the last 'V'
+ block in which tsv number is TSVNUM. In one trace frame, there
+ may be multiple 'V' blocks created for a given trace variable,
+ and the last matched 'V' block contains the updated value. */
pos = 0;
while ((pos = traceframe_find_block_type ('V', pos)) >= 0)
{
*val = extract_signed_integer ((gdb_byte *) val, 8,
gdbarch_byte_order
(target_gdbarch ()));
- return 1;
+ found = 1;
}
pos += (4 + 8);
}
- /* Didn't find anything. */
- return 0;
+ return found;
}
static int
return traceframe_number != -1;
}
-static int
-tfile_thread_alive (struct target_ops *ops, ptid_t ptid)
-{
- return 1;
-}
-
/* Callback for traceframe_walk_blocks. Builds a traceframe_info
object for the tfile target's current traceframe. */
unsigned short mlen;
tfile_read ((gdb_byte *) &maddr, 8);
+ maddr = extract_unsigned_integer ((gdb_byte *) &maddr, 8,
+ gdbarch_byte_order
+ (target_gdbarch ()));
tfile_read ((gdb_byte *) &mlen, 2);
+ mlen = (unsigned short)
+ extract_unsigned_integer ((gdb_byte *) &mlen,
+ 2, gdbarch_byte_order
+ (target_gdbarch ()));
r = VEC_safe_push (mem_range_s, info->memory, NULL);
break;
}
case 'V':
+ {
+ int vnum;
+
+ tfile_read ((gdb_byte *) &vnum, 4);
+ VEC_safe_push (int, info->tvars, vnum);
+ }
case 'R':
case 'S':
{
tfile_ops.to_has_stack = tfile_has_stack;
tfile_ops.to_has_registers = tfile_has_registers;
tfile_ops.to_traceframe_info = tfile_traceframe_info;
- tfile_ops.to_thread_alive = tfile_thread_alive;
tfile_ops.to_magic = OPS_MAGIC;
}
r->length = *length_p;
}
+/* Handle the start of a <tvar> element. */
+
+static void
+traceframe_info_start_tvar (struct gdb_xml_parser *parser,
+ const struct gdb_xml_element *element,
+ void *user_data,
+ VEC(gdb_xml_value_s) *attributes)
+{
+ struct traceframe_info *info = user_data;
+ const char *id_attrib = xml_find_attribute (attributes, "id")->value;
+ int id = gdb_xml_parse_ulongest (parser, id_attrib);
+
+ VEC_safe_push (int, info->tvars, id);
+}
+
/* Discard the constructed trace frame info (if an error occurs). */
static void
{ NULL, GDB_XML_AF_NONE, NULL, NULL }
};
+static const struct gdb_xml_attribute tvar_attributes[] = {
+ { "id", GDB_XML_AF_NONE, NULL, NULL },
+ { NULL, GDB_XML_AF_NONE, NULL, NULL }
+};
+
static const struct gdb_xml_element traceframe_info_children[] = {
{ "memory", memory_attributes, NULL,
GDB_XML_EF_REPEATABLE | GDB_XML_EF_OPTIONAL,
traceframe_info_start_memory, NULL },
+ { "tvar", tvar_attributes, NULL,
+ GDB_XML_EF_REPEATABLE | GDB_XML_EF_OPTIONAL,
+ traceframe_info_start_tvar, NULL },
{ NULL, NULL, NULL, GDB_XML_EF_NONE, NULL, NULL }
};
This is where we avoid re-fetching the object from the target if we
already have it cached. */
-static struct traceframe_info *
+struct traceframe_info *
get_traceframe_info (void)
{
if (traceframe_info == NULL)
traceframe_number = -1;
tracepoint_number = -1;
- if (tracepoint_list.list == NULL)
- {
- tracepoint_list.listsize = 128;
- tracepoint_list.list = xmalloc
- (tracepoint_list.listsize * sizeof (struct memrange));
- }
- if (tracepoint_list.aexpr_list == NULL)
- {
- tracepoint_list.aexpr_listsize = 128;
- tracepoint_list.aexpr_list = xmalloc
- (tracepoint_list.aexpr_listsize * sizeof (struct agent_expr *));
- }
-
- if (stepping_list.list == NULL)
- {
- stepping_list.listsize = 128;
- stepping_list.list = xmalloc
- (stepping_list.listsize * sizeof (struct memrange));
- }
-
- if (stepping_list.aexpr_list == NULL)
- {
- stepping_list.aexpr_listsize = 128;
- stepping_list.aexpr_list = xmalloc
- (stepping_list.aexpr_listsize * sizeof (struct agent_expr *));
- }
-
add_info ("scope", scope_info,
_("List the variables local to a scope"));
add_com ("tsave", class_trace, trace_save_command, _("\
Save the trace data to a file.\n\
+Use the '-ctf' option to save the data to CTF format.\n\
Use the '-r' option to direct the target to save directly to the file,\n\
using its own filesystem."));
&setlist,
&showlist);
+ add_setshow_zuinteger_unlimited_cmd ("trace-buffer-size", no_class,
+ &trace_buffer_size, _("\
+Set requested size of trace buffer."), _("\
+Show requested size of trace buffer."), _("\
+Use this to choose a size for the trace buffer. Some targets\n\
+may have fixed or limited buffer sizes. Specifying \"unlimited\" or -1\n\
+disables any attempt to set the buffer size and lets the target choose."),
+ set_trace_buffer_size, NULL,
+ &setlist, &showlist);
+
add_setshow_string_cmd ("trace-user", class_trace,
&trace_user, _("\
Set the user name to use for current and future trace runs"), _("\
init_tfile_ops ();
- add_target (&tfile_ops);
+ add_target_with_completer (&tfile_ops, filename_completer);
}