target_is_remote (void)
{
if (current_target.to_shortname &&
- strcmp (current_target.to_shortname, "remote") == 0)
+ (strcmp (current_target.to_shortname, "remote") == 0
+ || strcmp (current_target.to_shortname, "extended-remote") == 0))
return 1;
else
return 0;
{
case '1': /* malformed packet error */
if (*++buf == '0') /* general case: */
- error ("tracepoint.c: error in outgoing packet.");
+ error (_("tracepoint.c: error in outgoing packet."));
else
- error ("tracepoint.c: error in outgoing packet at field #%ld.",
+ error (_("tracepoint.c: error in outgoing packet at field #%ld."),
strtol (buf, NULL, 16));
case '2':
- error ("trace API error 0x%s.", ++buf);
+ error (_("trace API error 0x%s."), ++buf);
default:
- error ("Target returns error code '%s'.", buf);
+ error (_("Target returns error code '%s'."), buf);
}
}
QUIT; /* allow user to bail out with ^C */
getpkt (buf, sizeof_buf, 0);
if (buf[0] == 0)
- error ("Target does not support this command.");
+ error (_("Target does not support this command."));
else if (buf[0] == 'E')
trace_error (buf);
else if (buf[0] == 'O' &&
memcpy (value_contents_raw (func_val),
DEPRECATED_SYMBOL_NAME (traceframe_fun),
len);
- func_val->modifiable = 0;
+ deprecated_set_value_modifiable (func_val, 0);
set_internalvar (lookup_internalvar ("trace_func"), func_val);
}
memcpy (value_contents_raw (file_val),
traceframe_sal.symtab->filename,
len);
- file_val->modifiable = 0;
+ deprecated_set_value_modifiable (file_val, 0);
set_internalvar (lookup_internalvar ("trace_file"), file_val);
}
}
int i;
if (!arg || !*arg)
- error ("trace command requires an argument");
+ error (_("trace command requires an argument"));
if (from_tty && info_verbose)
printf_filtered ("TRACE %s\n", arg);
if (addressprint || (tp->source_file == NULL))
{
printf_filtered (" at ");
- print_address_numeric (tp->address, 1, gdb_stdout);
+ deprecated_print_address_numeric (tp->address, 1, gdb_stdout);
}
if (tp->source_file)
printf_filtered (": file %s, line %d.",
if (optional_p)
tpnum = tracepoint_count;
else
- error_no_arg ("tracepoint number");
+ error_no_arg (_("tracepoint number"));
}
else
tpnum = multi_p ? get_number_or_range (arg) : get_number (arg);
int all = 0;
if (args == 0 || *args == 0)
- error ("passcount command requires an argument (count + optional TP num)");
+ error (_("passcount command requires an argument (count + optional TP num)"));
count = strtoul (args, &args, 10); /* Count comes first, then TP num. */
args += 3; /* Skip special argument "all". */
all = 1;
if (*args)
- error ("Junk at end of arguments.");
+ error (_("Junk at end of arguments."));
}
else
t1 = get_tracepoint_by_number (&args, 1, 1);
static void
end_actions_pseudocommand (char *args, int from_tty)
{
- error ("This command cannot be used at the top level.");
+ error (_("This command cannot be used at the top level."));
}
static void
while_stepping_pseudocommand (char *args, int from_tty)
{
- error ("This command can only be used in a tracepoint actions list.");
+ error (_("This command can only be used in a tracepoint actions list."));
}
static void
collect_pseudocommand (char *args, int from_tty)
{
- error ("This command can only be used in a tracepoint actions list.");
+ error (_("This command can only be used in a tracepoint actions list."));
}
/* Enter a list of actions for a tracepoint. */
else
line = gdb_readline (0);
+ if (!line)
+ line = "end";
+
linetype = validate_actionline (&line, t);
if (linetype == BADLINE)
continue; /* already warned -- collect another line */
{
if (prompt == prompt2)
{
- warning ("Already processing 'while-stepping'");
+ warning (_("Already processing 'while-stepping'"));
continue;
}
else
c = lookup_cmd (&p, cmdlist, "", -1, 1);
if (c == 0)
{
- warning ("'%s' is not an action that I know, or is ambiguous.",
+ warning (_("'%s' is not an action that I know, or is ambiguous."),
p);
return BADLINE;
}
{
if (SYMBOL_CLASS (exp->elts[2].symbol) == LOC_CONST)
{
- warning ("constant %s (value %ld) will not be collected.",
+ warning (_("constant %s (value %ld) will not be collected."),
DEPRECATED_SYMBOL_NAME (exp->elts[2].symbol),
SYMBOL_VALUE (exp->elts[2].symbol));
return BADLINE;
}
else if (SYMBOL_CLASS (exp->elts[2].symbol) == LOC_OPTIMIZED_OUT)
{
- warning ("%s is optimized away and cannot be collected.",
+ warning (_("%s is optimized away and cannot be collected."),
DEPRECATED_SYMBOL_NAME (exp->elts[2].symbol));
return BADLINE;
}
make_cleanup_free_agent_expr (aexpr);
if (aexpr->len > MAX_AGENT_EXPR_LEN)
- error ("expression too complicated, try simplifying");
+ error (_("expression too complicated, try simplifying"));
ax_reqs (aexpr, &areqs);
(void) make_cleanup (xfree, areqs.reg_mask);
if (areqs.flaw != agent_flaw_none)
- error ("malformed expression");
+ error (_("malformed expression"));
if (areqs.min_height < 0)
- error ("gdb: Internal error: expression has min height < 0");
+ error (_("gdb: Internal error: expression has min height < 0"));
if (areqs.max_height > 20)
- error ("expression too complicated, try simplifying");
+ error (_("expression too complicated, try simplifying"));
do_cleanups (old_chain);
}
if (*p == '\0' ||
(t->step_count = strtol (p, &p, 0)) == 0)
{
- warning ("'%s': bad step-count; command ignored.", *line);
+ warning (_("'%s': bad step-count; command ignored."), *line);
return BADLINE;
}
return STEPPING;
return END;
else
{
- warning ("'%s' is not a supported tracepoint action.", *line);
+ warning (_("'%s' is not a supported tracepoint action."), *line);
return BADLINE;
}
}
struct collection_list
{
- unsigned char regs_mask[8]; /* room for up to 256 regs */
+ unsigned char regs_mask[32]; /* room for up to 256 regs */
long listsize;
long next_memrange;
struct memrange *list;
if (info_verbose)
printf_filtered ("collect register %d\n", regno);
if (regno > (8 * sizeof (collection->regs_mask)))
- error ("Internal: register number %d too large for tracepoint",
+ error (_("Internal: register number %d too large for tracepoint"),
regno);
collection->regs_mask[regno / 8] |= 1 << (regno % 8);
}
printf_filtered (",%ld)\n", len);
}
- /* type: 0 == memory, n == basereg */
+ /* type: -1 == memory, n == basereg */
memranges->list[memranges->next_memrange].type = type;
/* base: addr if memory, offset if reg relative. */
memranges->list[memranges->next_memrange].start = base;
switch (SYMBOL_CLASS (sym))
{
default:
- warning ("don't know how to trace local symbol %s",
+ warning (_("don't know how to trace local symbol %s"),
DEPRECATED_SYMBOL_NAME (sym));
case LOC_LOCAL:
case LOC_STATIC:
block = BLOCK_SUPERBLOCK (block);
}
if (count == 0)
- warning ("No %s found in scope.",
+ warning (_("No %s found in scope."),
type == 'L' ? "locals" : "args");
}
cmd = lookup_cmd (&action_exp, cmdlist, "", -1, 1);
if (cmd == 0)
- error ("Bad action list item: %s", action_exp);
+ error (_("Bad action list item: %s"), action_exp);
if (cmd_cfunc_eq (cmd, collect_pseudocommand))
{
ax_reqs (aexpr, &areqs);
if (areqs.flaw != agent_flaw_none)
- error ("malformed expression");
+ error (_("malformed expression"));
if (areqs.min_height < 0)
- error ("gdb: Internal error: expression has min height < 0");
+ error (_("gdb: Internal error: expression has min height < 0"));
if (areqs.max_height > 20)
- error ("expression too complicated, try simplifying");
+ error (_("expression too complicated, try simplifying"));
discard_cleanups (old_chain1);
add_aexpr (collect, aexpr);
putpkt ("QTinit");
remote_get_noisy_reply (target_buf, sizeof (target_buf));
if (strcmp (target_buf, "OK"))
- error ("Target does not support this command.");
+ error (_("Target does not support this command."));
ALL_TRACEPOINTS (t)
{
putpkt (buf);
remote_get_noisy_reply (target_buf, sizeof (target_buf));
if (strcmp (target_buf, "OK"))
- error ("Target does not support tracepoints.");
+ error (_("Target does not support tracepoints."));
if (t->actions)
{
remote_get_noisy_reply (target_buf,
sizeof (target_buf));
if (strcmp (target_buf, "OK"))
- error ("Error on target while setting tracepoints.");
+ error (_("Error on target while setting tracepoints."));
}
}
if (stepping_actions)
remote_get_noisy_reply (target_buf,
sizeof (target_buf));
if (strcmp (target_buf, "OK"))
- error ("Error on target while setting tracepoints.");
+ error (_("Error on target while setting tracepoints."));
}
}
putpkt ("QTStart");
remote_get_noisy_reply (target_buf, sizeof (target_buf));
if (strcmp (target_buf, "OK"))
- error ("Bogus reply from target: %s", target_buf);
+ error (_("Bogus reply from target: %s"), target_buf);
set_traceframe_num (-1); /* All old traceframes invalidated. */
set_tracepoint_num (-1);
set_traceframe_context (-1);
}
else
- error ("Trace can only be run on remote targets.");
+ error (_("Trace can only be run on remote targets."));
}
/* tstop command */
putpkt ("QTStop");
remote_get_noisy_reply (target_buf, sizeof (target_buf));
if (strcmp (target_buf, "OK"))
- error ("Bogus reply from target: %s", target_buf);
+ error (_("Bogus reply from target: %s"), target_buf);
trace_running_p = 0;
if (deprecated_trace_start_stop_hook)
deprecated_trace_start_stop_hook (0, from_tty);
}
else
- error ("Trace can only be run on remote targets.");
+ error (_("Trace can only be run on remote targets."));
}
unsigned long trace_running_p;
if (target_buf[0] != 'T' ||
(target_buf[1] != '0' && target_buf[1] != '1'))
- error ("Bogus reply from target: %s", target_buf);
+ error (_("Bogus reply from target: %s"), target_buf);
/* exported for use by the GUI */
trace_running_p = (target_buf[1] == '1');
}
else
- error ("Trace can only be run on remote targets.");
+ error (_("Trace can only be run on remote targets."));
}
/* Worker function for the various flavors of the tfind command. */
and then continue on to do something else. */
if (from_tty)
- error ("Target failed to find requested trace frame.");
+ error (_("Target failed to find requested trace frame."));
else
{
if (info_verbose)
break;
case 'T':
if ((target_tracept = (int) strtol (++reply, &reply, 16)) == -1)
- error ("Target failed to find requested trace frame.");
+ error (_("Target failed to find requested trace frame."));
break;
case 'O': /* "OK"? */
if (reply[1] == 'K' && reply[2] == '\0')
reply += 2;
else
- error ("Bogus reply from target: %s", reply);
+ error (_("Bogus reply from target: %s"), reply);
break;
default:
- error ("Bogus reply from target: %s", reply);
+ error (_("Bogus reply from target: %s"), reply);
}
flush_cached_frames ();
else if (0 == strcmp (args, "-"))
{
if (traceframe_number == -1)
- error ("not debugging trace buffer");
+ error (_("not debugging trace buffer"));
else if (from_tty && traceframe_number == 0)
- error ("already at start of trace buffer");
+ error (_("already at start of trace buffer"));
frameno = traceframe_number - 1;
}
frameno = parse_and_eval_long (args);
if (frameno < -1)
- error ("invalid input (%d is less than zero)", frameno);
+ error (_("invalid input (%d is less than zero)"), frameno);
sprintf (target_buf, "QTFrame:%x", frameno);
finish_tfind_command (target_buf, sizeof (target_buf), from_tty);
}
else
- error ("Trace can only be run on remote targets.");
+ error (_("Trace can only be run on remote targets."));
}
/* tfind end */
finish_tfind_command (target_buf, sizeof (target_buf), from_tty);
}
else
- error ("Trace can only be run on remote targets.");
+ error (_("Trace can only be run on remote targets."));
}
/* tfind tracepoint command */
if (args == 0 || *args == 0)
{
if (tracepoint_number == -1)
- error ("No current tracepoint -- please supply an argument.");
+ error (_("No current tracepoint -- please supply an argument."));
else
tdp = tracepoint_number; /* default is current TDP */
}
finish_tfind_command (target_buf, sizeof (target_buf), from_tty);
}
else
- error ("Trace can only be run on remote targets.");
+ error (_("Trace can only be run on remote targets."));
}
/* TFIND LINE command:
printf_filtered ("Attempting to find line %d instead.\n",
sal.line);
else
- error ("Cannot find a good line.");
+ error (_("Cannot find a good line."));
}
}
else
/* Is there any case in which we get here, and have an address
which the user would want to see? If we have debugging
symbols and no line numbers? */
- error ("Line number %d is out of range for \"%s\".\n",
+ error (_("Line number %d is out of range for \"%s\"."),
sal.line, sal.symtab->filename);
sprintf_vma (startpc_str, start_pc);
do_cleanups (old_chain);
}
else
- error ("Trace can only be run on remote targets.");
+ error (_("Trace can only be run on remote targets."));
}
/* tfind range command */
finish_tfind_command (target_buf, sizeof (target_buf), from_tty);
}
else
- error ("Trace can only be run on remote targets.");
+ error (_("Trace can only be run on remote targets."));
}
/* tfind outside command */
finish_tfind_command (target_buf, sizeof (target_buf), from_tty);
}
else
- error ("Trace can only be run on remote targets.");
+ error (_("Trace can only be run on remote targets."));
}
/* save-tracepoints command */
char tmp[40];
if (args == 0 || *args == 0)
- error ("Argument required (file name in which to save tracepoints");
+ error (_("Argument required (file name in which to save tracepoints"));
if (tracepoint_chain == 0)
{
- warning ("save-tracepoints: no tracepoints to save.\n");
+ warning (_("save-tracepoints: no tracepoints to save."));
return;
}
pathname = tilde_expand (args);
if (!(fp = fopen (pathname, "w")))
- error ("Unable to open file '%s' for saving tracepoints (%s)",
+ error (_("Unable to open file '%s' for saving tracepoints (%s)"),
args, safe_strerror (errno));
xfree (pathname);
{
cmd = lookup_cmd (&actionline, cmdlist, "", -1, 1);
if (cmd == 0)
- error ("Bad action list item: %s", actionline);
+ error (_("Bad action list item: %s"), actionline);
if (cmd_cfunc_eq (cmd, while_stepping_pseudocommand))
indent = i2;
else if (cmd_cfunc_eq (cmd, end_actions_pseudocommand))
int j, count = 0;
if (args == 0 || *args == 0)
- error ("requires an argument (function, line or *addr) to define a scope");
+ error (_("requires an argument (function, line or *addr) to define a scope"));
sals = decode_line_1 (&args, 1, NULL, 0, &canonical, NULL);
if (sals.nelts == 0)
break;
case LOC_STATIC:
printf_filtered ("in static storage at address ");
- print_address_numeric (SYMBOL_VALUE_ADDRESS (sym),
+ deprecated_print_address_numeric (SYMBOL_VALUE_ADDRESS (sym),
1, gdb_stdout);
break;
case LOC_REGISTER:
continue;
case LOC_LABEL:
printf_filtered ("a label at address ");
- print_address_numeric (SYMBOL_VALUE_ADDRESS (sym),
+ deprecated_print_address_numeric (SYMBOL_VALUE_ADDRESS (sym),
1, gdb_stdout);
break;
case LOC_BLOCK:
printf_filtered ("a function at address ");
- print_address_numeric (BLOCK_START (SYMBOL_BLOCK_VALUE (sym)),
+ deprecated_print_address_numeric (BLOCK_START (SYMBOL_BLOCK_VALUE (sym)),
1, gdb_stdout);
break;
case LOC_BASEREG:
else
{
printf_filtered ("static storage at address ");
- print_address_numeric (SYMBOL_VALUE_ADDRESS (msym), 1,
+ deprecated_print_address_numeric (SYMBOL_VALUE_ADDRESS (msym), 1,
gdb_stdout);
}
break;
break;
case LOC_INDIRECT:
printf_filtered ("extern (local indirect) at address ");
- print_address_numeric (SYMBOL_VALUE_ADDRESS (sym),
+ deprecated_print_address_numeric (SYMBOL_VALUE_ADDRESS (sym),
1, gdb_stdout);
break;
case LOC_COMPUTED:
if (!target_is_remote ())
{
- error ("Trace can only be run on remote targets.");
+ error (_("Trace can only be run on remote targets."));
return;
}
if (tracepoint_number == -1)
{
- warning ("No current trace frame.");
+ warning (_("No current trace frame."));
return;
}
break;
if (t == NULL)
- error ("No known tracepoint matches 'current' tracepoint #%d.",
+ error (_("No known tracepoint matches 'current' tracepoint #%d."),
tracepoint_number);
old_cleanups = make_cleanup (null_cleanup, NULL);
cmd = lookup_cmd (&action_exp, cmdlist, "", -1, 1);
if (cmd == 0)
- error ("Bad action list item: %s", action_exp);
+ error (_("Bad action list item: %s"), action_exp);
if (cmd_cfunc_eq (cmd, while_stepping_pseudocommand))
stepping_actions = 1;
}
add_info ("scope", scope_info,
- "List the variables local to a scope");
+ _("List the variables local to a scope"));
add_cmd ("tracepoints", class_trace, NULL,
- "Tracing of program execution without stopping the program.",
+ _("Tracing of program execution without stopping the program."),
&cmdlist);
- add_info ("tracepoints", tracepoints_info,
- "Status of tracepoints, or tracepoint number NUMBER.\n\
+ add_info ("tracepoints", tracepoints_info, _("\
+Status of tracepoints, or tracepoint number NUMBER.\n\
Convenience variable \"$tpnum\" contains the number of the\n\
-last tracepoint set.");
+last tracepoint set."));
add_info_alias ("tp", "tracepoints", 1);
- c = add_com ("save-tracepoints", class_trace, tracepoint_save_command,
- "Save current tracepoint definitions as a script.\n\
-Use the 'source' command in another debug session to restore them.");
+ c = add_com ("save-tracepoints", class_trace, tracepoint_save_command, _("\
+Save current tracepoint definitions as a script.\n\
+Use the 'source' command in another debug session to restore them."));
set_cmd_completer (c, filename_completer);
add_com ("tdump", class_trace, trace_dump_command,
- "Print everything collected at the current tracepoint.");
+ _("Print everything collected at the current tracepoint."));
- add_prefix_cmd ("tfind", class_trace, trace_find_command,
- "Select a trace frame;\n\
-No argument means forward by one frame; '-' means backward by one frame.",
+ add_prefix_cmd ("tfind", class_trace, trace_find_command, _("\
+Select a trace frame;\n\
+No argument means forward by one frame; '-' means backward by one frame."),
&tfindlist, "tfind ", 1, &cmdlist);
- add_cmd ("outside", class_trace, trace_find_outside_command,
- "Select a trace frame whose PC is outside the given \
-range.\nUsage: tfind outside addr1, addr2",
+ add_cmd ("outside", class_trace, trace_find_outside_command, _("\
+Select a trace frame whose PC is outside the given range.\n\
+Usage: tfind outside addr1, addr2"),
&tfindlist);
- add_cmd ("range", class_trace, trace_find_range_command,
- "Select a trace frame whose PC is in the given range.\n\
-Usage: tfind range addr1,addr2",
+ add_cmd ("range", class_trace, trace_find_range_command, _("\
+Select a trace frame whose PC is in the given range.\n\
+Usage: tfind range addr1,addr2"),
&tfindlist);
- add_cmd ("line", class_trace, trace_find_line_command,
- "Select a trace frame by source line.\n\
+ add_cmd ("line", class_trace, trace_find_line_command, _("\
+Select a trace frame by source line.\n\
Argument can be a line number (with optional source file), \n\
a function name, or '*' followed by an address.\n\
-Default argument is 'the next source line that was traced'.",
+Default argument is 'the next source line that was traced'."),
&tfindlist);
- add_cmd ("tracepoint", class_trace, trace_find_tracepoint_command,
- "Select a trace frame by tracepoint number.\n\
-Default is the tracepoint for the current trace frame.",
+ add_cmd ("tracepoint", class_trace, trace_find_tracepoint_command, _("\
+Select a trace frame by tracepoint number.\n\
+Default is the tracepoint for the current trace frame."),
&tfindlist);
- add_cmd ("pc", class_trace, trace_find_pc_command,
- "Select a trace frame by PC.\n\
-Default is the current PC, or the PC of the current trace frame.",
+ add_cmd ("pc", class_trace, trace_find_pc_command, _("\
+Select a trace frame by PC.\n\
+Default is the current PC, or the PC of the current trace frame."),
&tfindlist);
- add_cmd ("end", class_trace, trace_find_end_command,
- "Synonym for 'none'.\n\
-De-select any trace frame and resume 'live' debugging.",
+ add_cmd ("end", class_trace, trace_find_end_command, _("\
+Synonym for 'none'.\n\
+De-select any trace frame and resume 'live' debugging."),
&tfindlist);
add_cmd ("none", class_trace, trace_find_none_command,
- "De-select any trace frame and resume 'live' debugging.",
+ _("De-select any trace frame and resume 'live' debugging."),
&tfindlist);
add_cmd ("start", class_trace, trace_find_start_command,
- "Select the first trace frame in the trace buffer.",
+ _("Select the first trace frame in the trace buffer."),
&tfindlist);
add_com ("tstatus", class_trace, trace_status_command,
- "Display the status of the current trace data collection.");
+ _("Display the status of the current trace data collection."));
add_com ("tstop", class_trace, trace_stop_command,
- "Stop trace data collection.");
+ _("Stop trace data collection."));
add_com ("tstart", class_trace, trace_start_command,
- "Start trace data collection.");
+ _("Start trace data collection."));
- add_com ("passcount", class_trace, trace_pass_command,
- "Set the passcount for a tracepoint.\n\
+ add_com ("passcount", class_trace, trace_pass_command, _("\
+Set the passcount for a tracepoint.\n\
The trace will end when the tracepoint has been passed 'count' times.\n\
Usage: passcount COUNT TPNUM, where TPNUM may also be \"all\";\n\
-if TPNUM is omitted, passcount refers to the last tracepoint defined.");
+if TPNUM is omitted, passcount refers to the last tracepoint defined."));
- add_com ("end", class_trace, end_actions_pseudocommand,
- "Ends a list of commands or actions.\n\
+ add_com ("end", class_trace, end_actions_pseudocommand, _("\
+Ends a list of commands or actions.\n\
Several GDB commands allow you to enter a list of commands or actions.\n\
Entering \"end\" on a line by itself is the normal way to terminate\n\
such a list.\n\n\
-Note: the \"end\" command cannot be used at the gdb prompt.");
+Note: the \"end\" command cannot be used at the gdb prompt."));
- add_com ("while-stepping", class_trace, while_stepping_pseudocommand,
- "Specify single-stepping behavior at a tracepoint.\n\
+ add_com ("while-stepping", class_trace, while_stepping_pseudocommand, _("\
+Specify single-stepping behavior at a tracepoint.\n\
Argument is number of instructions to trace in single-step mode\n\
following the tracepoint. This command is normally followed by\n\
one or more \"collect\" commands, to specify what to collect\n\
while single-stepping.\n\n\
-Note: this command can only be used in a tracepoint \"actions\" list.");
+Note: this command can only be used in a tracepoint \"actions\" list."));
add_com_alias ("ws", "while-stepping", class_alias, 0);
add_com_alias ("stepping", "while-stepping", class_alias, 0);
- add_com ("collect", class_trace, collect_pseudocommand,
- "Specify one or more data items to be collected at a tracepoint.\n\
+ add_com ("collect", class_trace, collect_pseudocommand, _("\
+Specify one or more data items to be collected at a tracepoint.\n\
Accepts a comma-separated list of (one or more) expressions. GDB will\n\
collect all data (variables, registers) referenced by that expression.\n\
Also accepts the following special arguments:\n\
$regs -- all registers.\n\
$args -- all function arguments.\n\
$locals -- all variables local to the block/function scope.\n\
-Note: this command can only be used in a tracepoint \"actions\" list.");
+Note: this command can only be used in a tracepoint \"actions\" list."));
- add_com ("actions", class_trace, trace_actions_command,
- "Specify the actions to be taken at a tracepoint.\n\
+ add_com ("actions", class_trace, trace_actions_command, _("\
+Specify the actions to be taken at a tracepoint.\n\
Tracepoint actions may include collecting of specified data, \n\
single-stepping, or enabling/disabling other tracepoints, \n\
-depending on target's capabilities.");
+depending on target's capabilities."));
- add_cmd ("tracepoints", class_trace, delete_trace_command,
- "Delete specified tracepoints.\n\
+ add_cmd ("tracepoints", class_trace, delete_trace_command, _("\
+Delete specified tracepoints.\n\
Arguments are tracepoint numbers, separated by spaces.\n\
-No argument means delete all tracepoints.",
+No argument means delete all tracepoints."),
&deletelist);
- add_cmd ("tracepoints", class_trace, disable_trace_command,
- "Disable specified tracepoints.\n\
+ add_cmd ("tracepoints", class_trace, disable_trace_command, _("\
+Disable specified tracepoints.\n\
Arguments are tracepoint numbers, separated by spaces.\n\
-No argument means disable all tracepoints.",
+No argument means disable all tracepoints."),
&disablelist);
- add_cmd ("tracepoints", class_trace, enable_trace_command,
- "Enable specified tracepoints.\n\
+ add_cmd ("tracepoints", class_trace, enable_trace_command, _("\
+Enable specified tracepoints.\n\
Arguments are tracepoint numbers, separated by spaces.\n\
-No argument means enable all tracepoints.",
+No argument means enable all tracepoints."),
&enablelist);
- c = add_com ("trace", class_trace, trace_command,
- "Set a tracepoint at a specified line or function or address.\n\
+ c = add_com ("trace", class_trace, trace_command, _("\
+Set a tracepoint at a specified line or function or address.\n\
Argument may be a line number, function name, or '*' plus an address.\n\
For a line number or function, trace at the start of its code.\n\
If an address is specified, trace at that exact address.\n\n\
-Do \"help tracepoints\" for info on other tracepoint commands.");
+Do \"help tracepoints\" for info on other tracepoint commands."));
set_cmd_completer (c, location_completer);
add_com_alias ("tp", "trace", class_alias, 0);
projects / deliverable / binutils-gdb.git / blobdiff