/* General utility routines for GDB, the GNU debugger.
Copyright (C) 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
- Free Software Foundation, Inc.
+ 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008,
+ 2009 Free Software Foundation, Inc.
This file is part of GDB.
#include "gdb_string.h"
#include "event-top.h"
#include "exceptions.h"
+#include "gdbthread.h"
#ifdef TUI
#include "tui/tui.h" /* For tui_get_command_dimension. */
#include <time.h>
#if !HAVE_DECL_MALLOC
-extern PTR malloc (); /* OK: PTR */
+extern PTR malloc (); /* ARI: PTR */
#endif
#if !HAVE_DECL_REALLOC
-extern PTR realloc (); /* OK: PTR */
+extern PTR realloc (); /* ARI: PTR */
#endif
#if !HAVE_DECL_FREE
extern void free ();
static struct cleanup *cleanup_chain; /* cleaned up after a failed command */
static struct cleanup *final_cleanup_chain; /* cleaned up when gdb exits */
-/* Pointer to what is left to do for an execution command after the
- target stops. Used only in asynchronous mode, by targets that
- support async execution. The finish and until commands use it. So
- does the target extended-remote command. */
-struct continuation *cmd_continuation;
-struct continuation *intermediate_continuation;
-
/* Nonzero if we have job control. */
int job_control;
{
int *fd = arg;
close (*fd);
- xfree (fd);
}
struct cleanup *
{
int *saved_fd = xmalloc (sizeof (fd));
*saved_fd = fd;
- return make_cleanup (do_close_cleanup, saved_fd);
+ return make_cleanup_dtor (do_close_cleanup, saved_fd, xfree);
+}
+
+/* Helper function which does the work for make_cleanup_fclose. */
+
+static void
+do_fclose_cleanup (void *arg)
+{
+ FILE *file = arg;
+ fclose (arg);
+}
+
+/* Return a new cleanup that closes FILE. */
+
+struct cleanup *
+make_cleanup_fclose (FILE *file)
+{
+ return make_cleanup (do_fclose_cleanup, file);
+}
+
+/* Helper function which does the work for make_cleanup_obstack_free. */
+
+static void
+do_obstack_free (void *arg)
+{
+ struct obstack *ob = arg;
+ obstack_free (ob, NULL);
+}
+
+/* Return a new cleanup that frees OBSTACK. */
+
+struct cleanup *
+make_cleanup_obstack_free (struct obstack *obstack)
+{
+ return make_cleanup (do_obstack_free, obstack);
}
static void
{
}
-/* Add a continuation to the continuation list, the global list
- cmd_continuation. The new continuation will be added at the front.*/
+/* Continuations are implemented as cleanups internally. Inherit from
+ cleanups. */
+struct continuation
+{
+ struct cleanup base;
+};
+
+/* Add a continuation to the continuation list of THREAD. The new
+ continuation will be added at the front. */
void
-add_continuation (void (*continuation_hook) (void *, int), void *args)
+add_continuation (struct thread_info *thread,
+ void (*continuation_hook) (void *), void *args,
+ void (*continuation_free_args) (void *))
{
- struct continuation *continuation_ptr;
+ struct cleanup *as_cleanup = &thread->continuations->base;
+ make_cleanup_ftype *continuation_hook_fn = continuation_hook;
+
+ make_my_cleanup2 (&as_cleanup,
+ continuation_hook_fn,
+ args,
+ continuation_free_args);
- continuation_ptr =
- (struct continuation *) xmalloc (sizeof (struct continuation));
- continuation_ptr->continuation_hook = continuation_hook;
- continuation_ptr->args = args;
- continuation_ptr->next = cmd_continuation;
- cmd_continuation = continuation_ptr;
+ thread->continuations = (struct continuation *) as_cleanup;
}
-/* Walk down the cmd_continuation list, and execute all the
- continuations. There is a problem though. In some cases new
- continuations may be added while we are in the middle of this
- loop. If this happens they will be added in the front, and done
- before we have a chance of exhausting those that were already
- there. We need to then save the beginning of the list in a pointer
- and do the continuations from there on, instead of using the
- global beginning of list as our iteration pointer. */
+/* Add a continuation to the continuation list of INFERIOR. The new
+ continuation will be added at the front. */
+
void
-do_all_continuations (int error)
+add_inferior_continuation (void (*continuation_hook) (void *), void *args,
+ void (*continuation_free_args) (void *))
{
- struct continuation *continuation_ptr;
- struct continuation *saved_continuation;
+ struct inferior *inf = current_inferior ();
+ struct cleanup *as_cleanup = &inf->continuations->base;
+ make_cleanup_ftype *continuation_hook_fn = continuation_hook;
+
+ make_my_cleanup2 (&as_cleanup,
+ continuation_hook_fn,
+ args,
+ continuation_free_args);
+
+ inf->continuations = (struct continuation *) as_cleanup;
+}
+
+/* Do all continuations of the current inferior. */
+
+void
+do_all_inferior_continuations (void)
+{
+ struct cleanup *old_chain;
+ struct cleanup *as_cleanup;
+ struct inferior *inf = current_inferior ();
+
+ if (inf->continuations == NULL)
+ return;
/* Copy the list header into another pointer, and set the global
list header to null, so that the global list can change as a side
- effect of invoking the continuations and the processing of
- the preexisting continuations will not be affected. */
- continuation_ptr = cmd_continuation;
- cmd_continuation = NULL;
+ effect of invoking the continuations and the processing of the
+ preexisting continuations will not be affected. */
+
+ as_cleanup = &inf->continuations->base;
+ inf->continuations = NULL;
/* Work now on the list we have set aside. */
- while (continuation_ptr)
- {
- (continuation_ptr->continuation_hook) (continuation_ptr->args, error);
- saved_continuation = continuation_ptr;
- continuation_ptr = continuation_ptr->next;
- xfree (saved_continuation);
- }
+ do_my_cleanups (&as_cleanup, NULL);
}
-/* Walk down the cmd_continuation list, and get rid of all the
- continuations. */
+/* Get rid of all the inferior-wide continuations of INF. */
+
void
-discard_all_continuations (void)
+discard_all_inferior_continuations (struct inferior *inf)
{
- struct continuation *continuation_ptr;
+ struct cleanup *continuation_ptr = &inf->continuations->base;
+ discard_my_cleanups (&continuation_ptr, NULL);
+ inf->continuations = NULL;
+}
- while (cmd_continuation)
- {
- continuation_ptr = cmd_continuation;
- cmd_continuation = continuation_ptr->next;
- xfree (continuation_ptr);
- }
+static void
+restore_thread_cleanup (void *arg)
+{
+ ptid_t *ptid_p = arg;
+ switch_to_thread (*ptid_p);
+}
+
+/* Walk down the continuation list of PTID, and execute all the
+ continuations. There is a problem though. In some cases new
+ continuations may be added while we are in the middle of this loop.
+ If this happens they will be added in the front, and done before we
+ have a chance of exhausting those that were already there. We need
+ to then save the beginning of the list in a pointer and do the
+ continuations from there on, instead of using the global beginning
+ of list as our iteration pointer. */
+static void
+do_all_continuations_ptid (ptid_t ptid,
+ struct continuation **continuations_p)
+{
+ struct cleanup *old_chain;
+ ptid_t current_thread;
+ struct cleanup *as_cleanup;
+
+ if (*continuations_p == NULL)
+ return;
+
+ current_thread = inferior_ptid;
+
+ /* Restore selected thread on exit. Don't try to restore the frame
+ as well, because:
+
+ - When running continuations, the selected frame is always #0.
+
+ - The continuations may trigger symbol file loads, which may
+ change the frame layout (frame ids change), which would trigger
+ a warning if we used make_cleanup_restore_current_thread. */
+
+ old_chain = make_cleanup (restore_thread_cleanup, ¤t_thread);
+
+ /* Let the continuation see this thread as selected. */
+ switch_to_thread (ptid);
+
+ /* Copy the list header into another pointer, and set the global
+ list header to null, so that the global list can change as a side
+ effect of invoking the continuations and the processing of the
+ preexisting continuations will not be affected. */
+
+ as_cleanup = &(*continuations_p)->base;
+ *continuations_p = NULL;
+
+ /* Work now on the list we have set aside. */
+ do_my_cleanups (&as_cleanup, NULL);
+
+ do_cleanups (old_chain);
}
-/* Add a continuation to the continuation list, the global list
- intermediate_continuation. The new continuation will be added at
- the front. */
+/* Callback for iterate over threads. */
+static int
+do_all_continuations_thread_callback (struct thread_info *thread, void *data)
+{
+ do_all_continuations_ptid (thread->ptid, &thread->continuations);
+ return 0;
+}
+
+/* Do all continuations of thread THREAD. */
void
-add_intermediate_continuation (void (*continuation_hook)
- (void *, int), void *args)
+do_all_continuations_thread (struct thread_info *thread)
{
- struct continuation *continuation_ptr;
+ do_all_continuations_thread_callback (thread, NULL);
+}
- continuation_ptr =
- (struct continuation *) xmalloc (sizeof (struct continuation));
- continuation_ptr->continuation_hook = continuation_hook;
- continuation_ptr->args = args;
- continuation_ptr->next = intermediate_continuation;
- intermediate_continuation = continuation_ptr;
+/* Do all continuations of all threads. */
+void
+do_all_continuations (void)
+{
+ iterate_over_threads (do_all_continuations_thread_callback, NULL);
+}
+
+/* Callback for iterate over threads. */
+static int
+discard_all_continuations_thread_callback (struct thread_info *thread,
+ void *data)
+{
+ struct cleanup *continuation_ptr = &thread->continuations->base;
+ discard_my_cleanups (&continuation_ptr, NULL);
+ thread->continuations = NULL;
+ return 0;
+}
+
+/* Get rid of all the continuations of THREAD. */
+void
+discard_all_continuations_thread (struct thread_info *thread)
+{
+ discard_all_continuations_thread_callback (thread, NULL);
+}
+
+/* Get rid of all the continuations of all threads. */
+void
+discard_all_continuations (void)
+{
+ iterate_over_threads (discard_all_continuations_thread_callback, NULL);
+}
+
+
+/* Add a continuation to the intermediate continuation list of THREAD.
+ The new continuation will be added at the front. */
+void
+add_intermediate_continuation (struct thread_info *thread,
+ void (*continuation_hook)
+ (void *), void *args,
+ void (*continuation_free_args) (void *))
+{
+ struct cleanup *as_cleanup = &thread->intermediate_continuations->base;
+ make_cleanup_ftype *continuation_hook_fn = continuation_hook;
+
+ make_my_cleanup2 (&as_cleanup,
+ continuation_hook_fn,
+ args,
+ continuation_free_args);
+
+ thread->intermediate_continuations = (struct continuation *) as_cleanup;
}
/* Walk down the cmd_continuation list, and execute all the
there. We need to then save the beginning of the list in a pointer
and do the continuations from there on, instead of using the
global beginning of list as our iteration pointer.*/
+static int
+do_all_intermediate_continuations_thread_callback (struct thread_info *thread,
+ void *data)
+{
+ do_all_continuations_ptid (thread->ptid,
+ &thread->intermediate_continuations);
+ return 0;
+}
+
+/* Do all intermediate continuations of thread THREAD. */
void
-do_all_intermediate_continuations (int error)
+do_all_intermediate_continuations_thread (struct thread_info *thread)
{
- struct continuation *continuation_ptr;
- struct continuation *saved_continuation;
+ do_all_intermediate_continuations_thread_callback (thread, NULL);
+}
- /* Copy the list header into another pointer, and set the global
- list header to null, so that the global list can change as a side
- effect of invoking the continuations and the processing of
- the preexisting continuations will not be affected. */
- continuation_ptr = intermediate_continuation;
- intermediate_continuation = NULL;
+/* Do all intermediate continuations of all threads. */
+void
+do_all_intermediate_continuations (void)
+{
+ iterate_over_threads (do_all_intermediate_continuations_thread_callback, NULL);
+}
- /* Work now on the list we have set aside. */
- while (continuation_ptr)
- {
- (continuation_ptr->continuation_hook) (continuation_ptr->args, error);
- saved_continuation = continuation_ptr;
- continuation_ptr = continuation_ptr->next;
- xfree (saved_continuation);
- }
+/* Callback for iterate over threads. */
+static int
+discard_all_intermediate_continuations_thread_callback (struct thread_info *thread,
+ void *data)
+{
+ struct cleanup *continuation_ptr = &thread->intermediate_continuations->base;
+ discard_my_cleanups (&continuation_ptr, NULL);
+ thread->intermediate_continuations = NULL;
+ return 0;
}
-/* Walk down the cmd_continuation list, and get rid of all the
- continuations. */
+/* Get rid of all the intermediate continuations of THREAD. */
void
-discard_all_intermediate_continuations (void)
+discard_all_intermediate_continuations_thread (struct thread_info *thread)
{
- struct continuation *continuation_ptr;
+ discard_all_intermediate_continuations_thread_callback (thread, NULL);
+}
- while (intermediate_continuation)
- {
- continuation_ptr = intermediate_continuation;
- intermediate_continuation = continuation_ptr->next;
- xfree (continuation_ptr);
- }
+/* Get rid of all the intermediate continuations of all threads. */
+void
+discard_all_intermediate_continuations (void)
+{
+ iterate_over_threads (discard_all_intermediate_continuations_thread_callback, NULL);
}
\f
error (("%s"), message);
}
+/* Allow the user to configure the debugger behavior with respect to
+ what to do when an internal problem is detected. */
+
+const char internal_problem_ask[] = "ask";
+const char internal_problem_yes[] = "yes";
+const char internal_problem_no[] = "no";
+static const char *internal_problem_modes[] =
+{
+ internal_problem_ask,
+ internal_problem_yes,
+ internal_problem_no,
+ NULL
+};
+static const char *internal_problem_mode = internal_problem_ask;
+
/* Print a message reporting an internal error/warning. Ask the user
if they want to continue, dump core, or just exit. Return
something to indicate a quit. */
struct internal_problem
{
const char *name;
- /* FIXME: cagney/2002-08-15: There should be ``maint set/show''
- commands available for controlling these variables. */
- enum auto_boolean should_quit;
- enum auto_boolean should_dump_core;
+ const char *should_quit;
+ const char *should_dump_core;
};
/* Report a problem, internal to GDB, to the user. Once the problem
case 1:
dejavu = 2;
fputs_unfiltered (msg, gdb_stderr);
- abort (); /* NOTE: GDB has only three calls to abort(). */
+ abort (); /* NOTE: GDB has only four calls to abort(). */
default:
dejavu = 3;
- write (STDERR_FILENO, msg, sizeof (msg));
+ /* Newer GLIBC versions put the warn_unused_result attribute
+ on write, but this is one of those rare cases where
+ ignoring the return value is correct. Casting to (void)
+ does not fix this problem. This is the solution suggested
+ at http://gcc.gnu.org/bugzilla/show_bug.cgi?id=25509. */
+ if (write (STDERR_FILENO, msg, sizeof (msg)) != sizeof (msg))
+ abort (); /* NOTE: GDB has only four calls to abort(). */
exit (1);
}
}
make_cleanup (xfree, reason);
}
- switch (problem->should_quit)
+ if (problem->should_quit == internal_problem_ask)
{
- case AUTO_BOOLEAN_AUTO:
/* Default (yes/batch case) is to quit GDB. When in batch mode
- this lessens the likelhood of GDB going into an infinate
- loop. */
+ this lessens the likelihood of GDB going into an infinite
+ loop. */
quit_p = query (_("%s\nQuit this debugging session? "), reason);
- break;
- case AUTO_BOOLEAN_TRUE:
- quit_p = 1;
- break;
- case AUTO_BOOLEAN_FALSE:
- quit_p = 0;
- break;
- default:
- internal_error (__FILE__, __LINE__, _("bad switch"));
}
+ else if (problem->should_quit == internal_problem_yes)
+ quit_p = 1;
+ else if (problem->should_quit == internal_problem_no)
+ quit_p = 0;
+ else
+ internal_error (__FILE__, __LINE__, _("bad switch"));
- switch (problem->should_dump_core)
+ if (problem->should_dump_core == internal_problem_ask)
{
- case AUTO_BOOLEAN_AUTO:
/* Default (yes/batch case) is to dump core. This leaves a GDB
`dropping' so that it is easier to see that something went
wrong in GDB. */
dump_core_p = query (_("%s\nCreate a core file of GDB? "), reason);
- break;
- break;
- case AUTO_BOOLEAN_TRUE:
- dump_core_p = 1;
- break;
- case AUTO_BOOLEAN_FALSE:
- dump_core_p = 0;
- break;
- default:
- internal_error (__FILE__, __LINE__, _("bad switch"));
}
+ else if (problem->should_dump_core == internal_problem_yes)
+ dump_core_p = 1;
+ else if (problem->should_dump_core == internal_problem_no)
+ dump_core_p = 0;
+ else
+ internal_error (__FILE__, __LINE__, _("bad switch"));
if (quit_p)
{
if (dump_core_p)
- abort (); /* NOTE: GDB has only three calls to abort(). */
+ abort (); /* NOTE: GDB has only four calls to abort(). */
else
exit (1);
}
{
#ifdef HAVE_WORKING_FORK
if (fork () == 0)
- abort (); /* NOTE: GDB has only three calls to abort(). */
+ abort (); /* NOTE: GDB has only four calls to abort(). */
#endif
}
}
}
static struct internal_problem internal_error_problem = {
- "internal-error", AUTO_BOOLEAN_AUTO, AUTO_BOOLEAN_AUTO
+ "internal-error", internal_problem_ask, internal_problem_ask
};
NORETURN void
}
static struct internal_problem internal_warning_problem = {
- "internal-warning", AUTO_BOOLEAN_AUTO, AUTO_BOOLEAN_AUTO
+ "internal-warning", internal_problem_ask, internal_problem_ask
};
void
va_end (ap);
}
+/* Dummy functions to keep add_prefix_cmd happy. */
+
+static void
+set_internal_problem_cmd (char *args, int from_tty)
+{
+}
+
+static void
+show_internal_problem_cmd (char *args, int from_tty)
+{
+}
+
+/* When GDB reports an internal problem (error or warning) it gives
+ the user the opportunity to quit GDB and/or create a core file of
+ the current debug session. This function registers a few commands
+ that make it possible to specify that GDB should always or never
+ quit or create a core file, without asking. The commands look
+ like:
+
+ maint set PROBLEM-NAME quit ask|yes|no
+ maint show PROBLEM-NAME quit
+ maint set PROBLEM-NAME corefile ask|yes|no
+ maint show PROBLEM-NAME corefile
+
+ Where PROBLEM-NAME is currently "internal-error" or
+ "internal-warning". */
+
+static void
+add_internal_problem_command (struct internal_problem *problem)
+{
+ struct cmd_list_element **set_cmd_list;
+ struct cmd_list_element **show_cmd_list;
+ char *set_doc;
+ char *show_doc;
+
+ set_cmd_list = xmalloc (sizeof (*set_cmd_list));
+ show_cmd_list = xmalloc (sizeof (*set_cmd_list));
+ *set_cmd_list = NULL;
+ *show_cmd_list = NULL;
+
+ set_doc = xstrprintf (_("Configure what GDB does when %s is detected."),
+ problem->name);
+
+ show_doc = xstrprintf (_("Show what GDB does when %s is detected."),
+ problem->name);
+
+ add_prefix_cmd ((char*) problem->name,
+ class_maintenance, set_internal_problem_cmd, set_doc,
+ set_cmd_list,
+ concat ("maintenance set ", problem->name, " ", NULL),
+ 0/*allow-unknown*/, &maintenance_set_cmdlist);
+
+ add_prefix_cmd ((char*) problem->name,
+ class_maintenance, show_internal_problem_cmd, show_doc,
+ show_cmd_list,
+ concat ("maintenance show ", problem->name, " ", NULL),
+ 0/*allow-unknown*/, &maintenance_show_cmdlist);
+
+ set_doc = xstrprintf (_("\
+Set whether GDB should quit when an %s is detected"),
+ problem->name);
+ show_doc = xstrprintf (_("\
+Show whether GDB will quit when an %s is detected"),
+ problem->name);
+ add_setshow_enum_cmd ("quit", class_maintenance,
+ internal_problem_modes,
+ &problem->should_quit,
+ set_doc,
+ show_doc,
+ NULL, /* help_doc */
+ NULL, /* setfunc */
+ NULL, /* showfunc */
+ set_cmd_list,
+ show_cmd_list);
+
+ set_doc = xstrprintf (_("\
+Set whether GDB should create a core file of GDB when %s is detected"),
+ problem->name);
+ show_doc = xstrprintf (_("\
+Show whether GDB will create a core file of GDB when %s is detected"),
+ problem->name);
+ add_setshow_enum_cmd ("corefile", class_maintenance,
+ internal_problem_modes,
+ &problem->should_dump_core,
+ set_doc,
+ show_doc,
+ NULL, /* help_doc */
+ NULL, /* setfunc */
+ NULL, /* showfunc */
+ set_cmd_list,
+ show_cmd_list);
+}
+
/* Print the system error message for errno, and also mention STRING
as the file name for which the error was encountered.
Then return to command level. */
/* NOTE: These are declared using PTR to ensure consistency with
"libiberty.h". xfree() is GDB local. */
-PTR /* OK: PTR */
+PTR /* ARI: PTR */
xmalloc (size_t size)
{
void *val;
if (size == 0)
size = 1;
- val = malloc (size); /* OK: malloc */
+ val = malloc (size); /* ARI: malloc */
if (val == NULL)
nomem (size);
return xcalloc (1, size);
}
-PTR /* OK: PTR */
-xrealloc (PTR ptr, size_t size) /* OK: PTR */
+PTR /* ARI: PTR */
+xrealloc (PTR ptr, size_t size) /* ARI: PTR */
{
void *val;
size = 1;
if (ptr != NULL)
- val = realloc (ptr, size); /* OK: realloc */
+ val = realloc (ptr, size); /* ARI: realloc */
else
- val = malloc (size); /* OK: malloc */
+ val = malloc (size); /* ARI: malloc */
if (val == NULL)
nomem (size);
return (val);
}
-PTR /* OK: PTR */
+PTR /* ARI: PTR */
xcalloc (size_t number, size_t size)
{
void *mem;
size = 1;
}
- mem = calloc (number, size); /* OK: xcalloc */
+ mem = calloc (number, size); /* ARI: xcalloc */
if (mem == NULL)
nomem (number * size);
xfree (void *ptr)
{
if (ptr != NULL)
- free (ptr); /* OK: free */
+ free (ptr); /* ARI: free */
}
\f
void
gdb_print_host_address (const void *addr, struct ui_file *stream)
{
-
- /* We could use the %p conversion specifier to fprintf if we had any
- way of knowing whether this host supports it. But the following
- should work on the Alpha and on 32 bit machines. */
-
- fprintf_filtered (stream, "0x%lx", (unsigned long) addr);
+ fprintf_filtered (stream, "%s", host_address_to_string (addr));
}
\f
va_end (args);
}
-/* Print an error message saying that we couldn't make sense of a
- \^mumble sequence in a string or character constant. START and END
- indicate a substring of some larger string that contains the
- erroneous backslash sequence, missing the initial backslash. */
-static NORETURN int
-no_control_char_error (const char *start, const char *end)
+/* A helper for parse_escape that converts a host character to a
+ target character. C is the host character. If conversion is
+ possible, then the target character is stored in *TARGET_C and the
+ function returns 1. Otherwise, the function returns 0. */
+
+static int
+host_char_to_target (int c, int *target_c)
{
- int len = end - start;
- char *copy = alloca (end - start + 1);
+ struct obstack host_data;
+ char the_char = c;
+ struct cleanup *cleanups;
+ int result = 0;
+
+ obstack_init (&host_data);
+ cleanups = make_cleanup_obstack_free (&host_data);
- memcpy (copy, start, len);
- copy[len] = '\0';
+ convert_between_encodings (target_charset (), host_charset (),
+ &the_char, 1, 1, &host_data, translit_none);
- error (_("There is no control character `\\%s' in the `%s' character set."),
- copy, target_charset ());
+ if (obstack_object_size (&host_data) == 1)
+ {
+ result = 1;
+ *target_c = *(char *) obstack_base (&host_data);
+ }
+
+ do_cleanups (cleanups);
+ return result;
}
/* Parse a C escape sequence. STRING_PTR points to a variable
int
parse_escape (char **string_ptr)
{
- int target_char;
+ int target_char = -2; /* initialize to avoid GCC warnings */
int c = *(*string_ptr)++;
- if (c_parse_backslash (c, &target_char))
- return target_char;
- else
- switch (c)
- {
+ switch (c)
+ {
case '\n':
return -2;
case 0:
(*string_ptr)--;
return 0;
- case '^':
- {
- /* Remember where this escape sequence started, for reporting
- errors. */
- char *sequence_start_pos = *string_ptr - 1;
-
- c = *(*string_ptr)++;
-
- if (c == '?')
- {
- /* XXXCHARSET: What is `delete' in the host character set? */
- c = 0177;
-
- if (!host_char_to_target (c, &target_char))
- error (_("There is no character corresponding to `Delete' "
- "in the target character set `%s'."), host_charset ());
-
- return target_char;
- }
- else if (c == '\\')
- target_char = parse_escape (string_ptr);
- else
- {
- if (!host_char_to_target (c, &target_char))
- no_control_char_error (sequence_start_pos, *string_ptr);
- }
-
- /* Now target_char is something like `c', and we want to find
- its control-character equivalent. */
- if (!target_char_to_control_char (target_char, &target_char))
- no_control_char_error (sequence_start_pos, *string_ptr);
-
- return target_char;
- }
-
- /* XXXCHARSET: we need to use isdigit and value-of-digit
- methods of the host character set here. */
case '0':
case '1':
case '6':
case '7':
{
- int i = c - '0';
+ int i = host_hex_value (c);
int count = 0;
while (++count < 3)
{
c = (**string_ptr);
- if (c >= '0' && c <= '7')
+ if (isdigit (c) && c != '8' && c != '9')
{
(*string_ptr)++;
i *= 8;
- i += c - '0';
+ i += host_hex_value (c);
}
else
{
}
return i;
}
- default:
- if (!host_char_to_target (c, &target_char))
- error
- ("The escape sequence `\%c' is equivalent to plain `%c', which"
- " has no equivalent\n" "in the `%s' character set.", c, c,
- target_charset ());
- return target_char;
- }
+
+ case 'a':
+ c = '\a';
+ break;
+ case 'b':
+ c = '\b';
+ break;
+ case 'f':
+ c = '\f';
+ break;
+ case 'n':
+ c = '\n';
+ break;
+ case 'r':
+ c = '\r';
+ break;
+ case 't':
+ c = '\t';
+ break;
+ case 'v':
+ c = '\v';
+ break;
+
+ default:
+ break;
+ }
+
+ if (!host_char_to_target (c, &target_char))
+ error
+ ("The escape sequence `\%c' is equivalent to plain `%c', which"
+ " has no equivalent\n" "in the `%s' character set.", c, c,
+ target_charset ());
+ return target_char;
}
\f
/* Print the character C on STREAM as part of the contents of a literal
{
struct timeval tm;
char *timestamp;
+ int len, need_nl;
gettimeofday (&tm, NULL);
- timestamp = xstrprintf ("%ld:%ld ", (long) tm.tv_sec, (long) tm.tv_usec);
+
+ len = strlen (linebuffer);
+ need_nl = (len > 0 && linebuffer[len - 1] != '\n');
+
+ timestamp = xstrprintf ("%ld:%ld %s%s",
+ (long) tm.tv_sec, (long) tm.tv_usec,
+ linebuffer,
+ need_nl ? "\n": "");
make_cleanup (xfree, timestamp);
fputs_unfiltered (timestamp, stream);
}
- fputs_unfiltered (linebuffer, stream);
+ else
+ fputs_unfiltered (linebuffer, stream);
do_cleanups (old_cleanups);
}
}
char *
-paddr_u (CORE_ADDR addr)
+pulongest (ULONGEST u)
{
- return decimal2str ("", addr, 0);
+ return decimal2str ("", u, 0);
}
char *
-paddr_d (LONGEST addr)
+plongest (LONGEST l)
{
- if (addr < 0)
- return decimal2str ("-", -addr, 0);
+ if (l < 0)
+ return decimal2str ("-", -l, 0);
else
- return decimal2str ("", addr, 0);
+ return decimal2str ("", l, 0);
}
/* Eliminate warning from compiler on 32-bit systems. */
host_address_to_string (const void *addr)
{
char *str = get_cell ();
- sprintf (str, "0x%lx", (unsigned long) addr);
+
+ xsnprintf (str, CELLSIZE, "0x%s", phex_nz ((uintptr_t) addr, sizeof (addr)));
return str;
}
dirname[base - filename] = '\0';
return dirname;
}
+
+/* Call libiberty's buildargv, and return the result.
+ If buildargv fails due to out-of-memory, call nomem.
+ Therefore, the returned value is guaranteed to be non-NULL,
+ unless the parameter itself is NULL. */
+
+char **
+gdb_buildargv (const char *s)
+{
+ char **argv = buildargv (s);
+ if (s != NULL && argv == NULL)
+ nomem (0);
+ return argv;
+}
+
+/* Provide a prototype to silence -Wmissing-prototypes. */
+extern initialize_file_ftype _initialize_utils;
+
+void
+_initialize_utils (void)
+{
+ add_internal_problem_command (&internal_error_problem);
+ add_internal_problem_command (&internal_warning_problem);
+}