/* General utility routines for GDB, the GNU debugger.
- Copyright 1986, 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
+ Copyright 1986, 89, 90, 91, 92, 95, 1996 Free Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "defs.h"
-#if !defined(__GO32__)
-#include <sys/ioctl.h>
-#include <sys/param.h>
-#include <pwd.h>
-#endif
+#ifdef ANSI_PROTOTYPES
+#include <stdarg.h>
+#else
#include <varargs.h>
+#endif
#include <ctype.h>
-#include <string.h>
+#include "gdb_string.h"
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
#include "signals.h"
#include "gdbcmd.h"
#include "serial.h"
-#include "terminal.h" /* For job_control */
#include "bfd.h"
#include "target.h"
#include "demangle.h"
#include "expression.h"
#include "language.h"
+#include "annotate.h"
+
+#include "readline.h"
+
+/* readline defines this. */
+#undef savestring
/* Prototypes for local functions */
-#if defined (NO_MMALLOC) || defined (NO_MMALLOC_CHECK)
-#else
+static void vfprintf_maybe_filtered PARAMS ((FILE *, const char *, va_list, int));
-static void
-malloc_botch PARAMS ((void));
+static void fputs_maybe_filtered PARAMS ((const char *, FILE *, int));
-#endif /* NO_MMALLOC, etc */
+#if defined (USE_MMALLOC) && !defined (NO_MMCHECK)
+static void malloc_botch PARAMS ((void));
+#endif
static void
-fatal_dump_core (); /* Can't prototype with <varargs.h> usage... */
+fatal_dump_core PARAMS((char *, ...));
static void
prompt_for_continue PARAMS ((void));
/* Chain of cleanup actions established with make_cleanup,
to be executed if an error happens. */
-static struct cleanup *cleanup_chain;
+static struct cleanup *cleanup_chain; /* cleaned up after a failed command */
+static struct cleanup *final_cleanup_chain; /* cleaned up when gdb exits */
+static struct cleanup *run_cleanup_chain; /* cleaned up on each 'run' */
+
+/* Nonzero if we have job control. */
+
+int job_control;
/* Nonzero means a quit has been requested. */
/* String to be printed before error messages, if any. */
char *error_pre_print;
+
+/* String to be printed before quit messages, if any. */
+
+char *quit_pre_print;
+
+/* String to be printed before warning messages, if any. */
+
char *warning_pre_print = "\nwarning: ";
\f
/* Add a new cleanup to the cleanup_chain,
make_cleanup (function, arg)
void (*function) PARAMS ((PTR));
PTR arg;
+{
+ return make_my_cleanup (&cleanup_chain, function, arg);
+}
+
+struct cleanup *
+make_final_cleanup (function, arg)
+ void (*function) PARAMS ((PTR));
+ PTR arg;
+{
+ return make_my_cleanup (&final_cleanup_chain, function, arg);
+}
+struct cleanup *
+make_run_cleanup (function, arg)
+ void (*function) PARAMS ((PTR));
+ PTR arg;
+{
+ return make_my_cleanup (&run_cleanup_chain, function, arg);
+}
+struct cleanup *
+make_my_cleanup (pmy_chain, function, arg)
+ struct cleanup **pmy_chain;
+ void (*function) PARAMS ((PTR));
+ PTR arg;
{
register struct cleanup *new
= (struct cleanup *) xmalloc (sizeof (struct cleanup));
- register struct cleanup *old_chain = cleanup_chain;
+ register struct cleanup *old_chain = *pmy_chain;
- new->next = cleanup_chain;
+ new->next = *pmy_chain;
new->function = function;
new->arg = arg;
- cleanup_chain = new;
+ *pmy_chain = new;
return old_chain;
}
void
do_cleanups (old_chain)
register struct cleanup *old_chain;
+{
+ do_my_cleanups (&cleanup_chain, old_chain);
+}
+
+void
+do_final_cleanups (old_chain)
+ register struct cleanup *old_chain;
+{
+ do_my_cleanups (&final_cleanup_chain, old_chain);
+}
+
+void
+do_run_cleanups (old_chain)
+ register struct cleanup *old_chain;
+{
+ do_my_cleanups (&run_cleanup_chain, old_chain);
+}
+
+void
+do_my_cleanups (pmy_chain, old_chain)
+ register struct cleanup **pmy_chain;
+ register struct cleanup *old_chain;
{
register struct cleanup *ptr;
- while ((ptr = cleanup_chain) != old_chain)
+ while ((ptr = *pmy_chain) != old_chain)
{
- cleanup_chain = ptr->next; /* Do this first incase recursion */
+ *pmy_chain = ptr->next; /* Do this first incase recursion */
(*ptr->function) (ptr->arg);
free (ptr);
}
void
discard_cleanups (old_chain)
register struct cleanup *old_chain;
+{
+ discard_my_cleanups (&cleanup_chain, old_chain);
+}
+
+void
+discard_final_cleanups (old_chain)
+ register struct cleanup *old_chain;
+{
+ discard_my_cleanups (&final_cleanup_chain, old_chain);
+}
+
+void
+discard_my_cleanups (pmy_chain, old_chain)
+ register struct cleanup **pmy_chain;
+ register struct cleanup *old_chain;
{
register struct cleanup *ptr;
- while ((ptr = cleanup_chain) != old_chain)
+ while ((ptr = *pmy_chain) != old_chain)
{
- cleanup_chain = ptr->next;
+ *pmy_chain = ptr->next;
free ((PTR)ptr);
}
}
struct cleanup *
save_cleanups ()
{
- struct cleanup *old_chain = cleanup_chain;
+ return save_my_cleanups (&cleanup_chain);
+}
- cleanup_chain = 0;
+struct cleanup *
+save_final_cleanups ()
+{
+ return save_my_cleanups (&final_cleanup_chain);
+}
+
+struct cleanup *
+save_my_cleanups (pmy_chain)
+ struct cleanup **pmy_chain;
+{
+ struct cleanup *old_chain = *pmy_chain;
+
+ *pmy_chain = 0;
return old_chain;
}
restore_cleanups (chain)
struct cleanup *chain;
{
- cleanup_chain = chain;
+ restore_my_cleanups (&cleanup_chain, chain);
+}
+
+void
+restore_final_cleanups (chain)
+ struct cleanup *chain;
+{
+ restore_my_cleanups (&final_cleanup_chain, chain);
+}
+
+void
+restore_my_cleanups (pmy_chain, chain)
+ struct cleanup **pmy_chain;
+ struct cleanup *chain;
+{
+ *pmy_chain = chain;
}
/* This function is useful for cleanups.
/* ARGSUSED */
void
null_cleanup (arg)
- char **arg;
+ PTR arg;
{
}
\f
-/* Provide a hook for modules wishing to print their own warning messages
- to set up the terminal state in a compatible way, without them having
- to import all the target_<...> macros. */
+/* Print a warning message. Way to use this is to call warning_begin,
+ output the warning message (use unfiltered output to gdb_stderr),
+ ending in a newline. There is not currently a warning_end that you
+ call afterwards, but such a thing might be added if it is useful
+ for a GUI to separate warning messages from other output.
+
+ FIXME: Why do warnings use unfiltered output and errors filtered?
+ Is this anything other than a historical accident? */
void
-warning_setup ()
+warning_begin ()
{
target_terminal_ours ();
wrap_here(""); /* Force out any buffered output */
gdb_flush (gdb_stdout);
+ if (warning_pre_print)
+ fprintf_unfiltered (gdb_stderr, warning_pre_print);
}
/* Print a warning message.
The first argument STRING is the warning message, used as a fprintf string,
and the remaining args are passed as arguments to it.
The primary difference between warnings and errors is that a warning
- does not force the return to command level. */
+ does not force the return to command level. */
/* VARARGS */
void
+#ifdef ANSI_PROTOTYPES
+warning (const char *string, ...)
+#else
warning (va_alist)
va_dcl
+#endif
{
va_list args;
+#ifdef ANSI_PROTOTYPES
+ va_start (args, string);
+#else
char *string;
va_start (args);
- target_terminal_ours ();
- wrap_here(""); /* Force out any buffered output */
- gdb_flush (gdb_stdout);
- if (warning_pre_print)
- fprintf_unfiltered (gdb_stderr, warning_pre_print);
string = va_arg (args, char *);
+#endif
+ warning_begin ();
vfprintf_unfiltered (gdb_stderr, string, args);
fprintf_unfiltered (gdb_stderr, "\n");
va_end (args);
}
+/* Start the printing of an error message. Way to use this is to call
+ this, output the error message (use filtered output to gdb_stderr
+ (FIXME: Some callers, like memory_error, use gdb_stdout)), ending
+ in a newline, and then call return_to_top_level (RETURN_ERROR).
+ error() provides a convenient way to do this for the special case
+ that the error message can be formatted with a single printf call,
+ but this is more general. */
+void
+error_begin ()
+{
+ target_terminal_ours ();
+ wrap_here (""); /* Force out any buffered output */
+ gdb_flush (gdb_stdout);
+
+ annotate_error_begin ();
+
+ if (error_pre_print)
+ fprintf_filtered (gdb_stderr, error_pre_print);
+}
+
/* Print an error message and return to command level.
The first argument STRING is the error message, used as a fprintf string,
and the remaining args are passed as arguments to it. */
/* VARARGS */
NORETURN void
+#ifdef ANSI_PROTOTYPES
+error (const char *string, ...)
+#else
error (va_alist)
va_dcl
+#endif
{
va_list args;
- char *string;
-
+#ifdef ANSI_PROTOTYPES
+ va_start (args, string);
+#else
va_start (args);
- target_terminal_ours ();
- wrap_here(""); /* Force out any buffered output */
- gdb_flush (gdb_stdout);
- if (error_pre_print)
- fprintf_filtered (gdb_stderr, error_pre_print);
- string = va_arg (args, char *);
- vfprintf_filtered (gdb_stderr, string, args);
- fprintf_filtered (gdb_stderr, "\n");
- va_end (args);
- return_to_top_level (RETURN_ERROR);
+#endif
+ if (error_hook)
+ (*error_hook) ();
+ else
+ {
+ error_begin ();
+#ifdef ANSI_PROTOTYPES
+ vfprintf_filtered (gdb_stderr, string, args);
+#else
+ {
+ char *string1;
+
+ string1 = va_arg (args, char *);
+ vfprintf_filtered (gdb_stderr, string1, args);
+ }
+#endif
+ fprintf_filtered (gdb_stderr, "\n");
+ va_end (args);
+ return_to_top_level (RETURN_ERROR);
+ }
}
+
/* Print an error message and exit reporting failure.
This is for a error that we cannot continue from.
The arguments are printed a la printf.
/* VARARGS */
NORETURN void
+#ifdef ANSI_PROTOTYPES
+fatal (char *string, ...)
+#else
fatal (va_alist)
va_dcl
+#endif
{
va_list args;
+#ifdef ANSI_PROTOTYPES
+ va_start (args, string);
+#else
char *string;
-
va_start (args);
string = va_arg (args, char *);
+#endif
fprintf_unfiltered (gdb_stderr, "\ngdb: ");
vfprintf_unfiltered (gdb_stderr, string, args);
fprintf_unfiltered (gdb_stderr, "\n");
/* VARARGS */
static void
+#ifdef ANSI_PROTOTYPES
+fatal_dump_core (char *string, ...)
+#else
fatal_dump_core (va_alist)
va_dcl
+#endif
{
va_list args;
+#ifdef ANSI_PROTOTYPES
+ va_start (args, string);
+#else
char *string;
va_start (args);
string = va_arg (args, char *);
+#endif
/* "internal error" is always correct, since GDB should never dump
core, no matter what the input. */
fprintf_unfiltered (gdb_stderr, "\ngdb internal error: ");
as the file name for which the error was encountered.
Then return to command level. */
-void
+NORETURN void
perror_with_name (string)
char *string;
{
gdb_flush (gdb_stderr);
/* 3. The system-level buffer. */
- SERIAL_FLUSH_OUTPUT (gdb_stdout_serial);
+ SERIAL_DRAIN_OUTPUT (gdb_stdout_serial);
SERIAL_UN_FDOPEN (gdb_stdout_serial);
+ annotate_error_begin ();
+
/* Don't use *_filtered; we don't want to prompt the user to continue. */
- if (error_pre_print)
- fprintf_unfiltered (gdb_stderr, error_pre_print);
+ if (quit_pre_print)
+ fprintf_unfiltered (gdb_stderr, quit_pre_print);
if (job_control
/* If there is no terminal switching for this target, then we can't
possibly get screwed by the lack of job control. */
- || current_target->to_terminal_ours == NULL)
+ || current_target.to_terminal_ours == NULL)
fprintf_unfiltered (gdb_stderr, "Quit\n");
else
fprintf_unfiltered (gdb_stderr,
}
-#ifdef __GO32__
+#if defined(__GO32__)
/* In the absence of signals, poll keyboard for a quit.
Called from #define QUIT pollquit() in xm-go32.h. */
void
-pollquit()
+notice_quit()
{
if (kbhit ())
- {
- int k = getkey ();
- if (k == 1) {
+ switch (getkey ())
+ {
+ case 1:
quit_flag = 1;
- quit();
- }
- else if (k == 2) {
- immediate_quit = 1;
- quit ();
+ break;
+ case 2:
+ immediate_quit = 2;
+ break;
+ default:
+ /* We just ignore it */
+ /* FIXME!! Don't think this actually works! */
+ fprintf_unfiltered (gdb_stderr, "CTRL-A to quit, CTRL-B to quit harder\n");
+ break;
}
- else
- {
- /* We just ignore it */
- fprintf_unfiltered (gdb_stderr, "CTRL-A to quit, CTRL-B to quit harder\n");
- }
- }
}
+#elif defined(_MSC_VER) /* should test for wingdb instead? */
+
+/*
+ * Windows translates all keyboard and mouse events
+ * into a message which is appended to the message
+ * queue for the process.
+ */
-#endif
-#ifdef __GO32__
void notice_quit()
{
- if (kbhit ())
- {
- int k = getkey ();
- if (k == 1) {
- quit_flag = 1;
- }
- else if (k == 2)
- {
- immediate_quit = 1;
- }
- else
- {
- fprintf_unfiltered (gdb_stderr, "CTRL-A to quit, CTRL-B to quit harder\n");
- }
- }
+ int k = win32pollquit();
+ if (k == 1)
+ quit_flag = 1;
+ else if (k == 2)
+ immediate_quit = 1;
}
-#else
+
+#else /* !defined(__GO32__) && !defined(_MSC_VER) */
+
void notice_quit()
{
/* Done by signals */
}
-#endif
+
+#endif /* !defined(__GO32__) && !defined(_MSC_VER) */
+
+void
+pollquit()
+{
+ notice_quit ();
+ if (quit_flag || immediate_quit)
+ quit ();
+}
+
/* Control C comes here */
void
int signo;
{
quit_flag = 1;
-
/* Restore the signal handler. Harmless with BSD-style signals, needed
for System V-style signals. So just always do it, rather than worrying
about USG defines and stuff like that. */
signal (signo, request_quit);
- if (immediate_quit)
+#ifdef REQUEST_QUIT
+ REQUEST_QUIT;
+#else
+ if (immediate_quit)
quit ();
+#endif
}
\f
/* Memory management stuff (malloc friends). */
-#if defined (NO_MMALLOC)
+/* Make a substitute size_t for non-ANSI compilers. */
+
+#ifndef HAVE_STDDEF_H
+#ifndef size_t
+#define size_t unsigned int
+#endif
+#endif
+
+#if !defined (USE_MMALLOC)
PTR
mmalloc (md, size)
PTR md;
- long size;
+ size_t size;
{
- return (malloc (size));
+ return malloc (size);
}
PTR
mrealloc (md, ptr, size)
PTR md;
PTR ptr;
- long size;
+ size_t size;
{
if (ptr == 0) /* Guard against old realloc's */
return malloc (size);
free (ptr);
}
-#endif /* NO_MMALLOC */
+#endif /* USE_MMALLOC */
-#if defined (NO_MMALLOC) || defined (NO_MMALLOC_CHECK)
+#if !defined (USE_MMALLOC) || defined (NO_MMCHECK)
void
init_malloc (md)
{
}
-#else /* have mmalloc and want corruption checking */
+#else /* Have mmalloc and want corruption checking */
static void
malloc_botch ()
by MD, to detect memory corruption. Note that MD may be NULL to specify
the default heap that grows via sbrk.
- Note that for freshly created regions, we must call mmcheck prior to any
+ Note that for freshly created regions, we must call mmcheckf prior to any
mallocs in the region. Otherwise, any region which was allocated prior to
installing the checking hooks, which is later reallocated or freed, will
fail the checks! The mmcheck function only allows initial hooks to be
Returns zero on failure, non-zero on success. */
+#ifndef MMCHECK_FORCE
+#define MMCHECK_FORCE 0
+#endif
+
void
init_malloc (md)
PTR md;
{
- if (!mmcheck (md, malloc_botch))
+ if (!mmcheckf (md, malloc_botch, MMCHECK_FORCE))
{
- warning ("internal error: failed to install memory consistency checks");
+ /* Don't use warning(), which relies on current_target being set
+ to something other than dummy_target, until after
+ initialize_all_files(). */
+
+ fprintf_unfiltered
+ (gdb_stderr, "warning: failed to install memory consistency checks; ");
+ fprintf_unfiltered
+ (gdb_stderr, "configuration should define NO_MMCHECK or MMCHECK_FORCE\n");
}
mmtrace ();
PTR
xmalloc (size)
- long size;
+ size_t size;
{
return (xmmalloc ((PTR) NULL, size));
}
PTR
xrealloc (ptr, size)
PTR ptr;
- long size;
+ size_t size;
{
return (xmrealloc ((PTR) NULL, ptr, size));
}
/* VARARGS */
int
+#ifdef ANSI_PROTOTYPES
+query (char *ctlstr, ...)
+#else
query (va_alist)
va_dcl
+#endif
{
va_list args;
- char *ctlstr;
register int answer;
register int ans2;
+ int retval;
+
+#ifdef ANSI_PROTOTYPES
+ va_start (args, ctlstr);
+#else
+ char *ctlstr;
+ va_start (args);
+ ctlstr = va_arg (args, char *);
+#endif
+
+ if (query_hook)
+ {
+ return query_hook (ctlstr, args);
+ }
/* Automatically answer "yes" if input is not from a terminal. */
if (!input_from_terminal_p ())
return 1;
+#ifdef MPW
+ /* FIXME Automatically answer "yes" if called from MacGDB. */
+ if (mac_app)
+ return 1;
+#endif /* MPW */
while (1)
{
wrap_here (""); /* Flush any buffered output */
gdb_flush (gdb_stdout);
- va_start (args);
- ctlstr = va_arg (args, char *);
+
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032pre-query\n");
+
vfprintf_filtered (gdb_stdout, ctlstr, args);
- va_end (args);
printf_filtered ("(y or n) ");
+
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032query\n");
+
+#ifdef MPW
+ /* If not in MacGDB, move to a new line so the entered line doesn't
+ have a prompt on the front of it. */
+ if (!mac_app)
+ fputs_unfiltered ("\n", gdb_stdout);
+#endif /* MPW */
+
gdb_flush (gdb_stdout);
answer = fgetc (stdin);
clearerr (stdin); /* in case of C-d */
if (answer == EOF) /* C-d */
- return 1;
+ {
+ retval = 1;
+ break;
+ }
if (answer != '\n') /* Eat rest of input line, to EOF or newline */
do
{
if (answer >= 'a')
answer -= 040;
if (answer == 'Y')
- return 1;
+ {
+ retval = 1;
+ break;
+ }
if (answer == 'N')
- return 0;
+ {
+ retval = 0;
+ break;
+ }
printf_filtered ("Please answer y or n.\n");
}
+
+ if (annotation_level > 1)
+ printf_filtered ("\n\032\032post-query\n");
+ return retval;
}
\f
fprintf_filtered (stream, "%c", c);
}
}
+
+
+
+
+static char * hexlate = "0123456789abcdef" ;
+int fmthex(inbuf,outbuff,length,linelength)
+ unsigned char * inbuf ;
+ unsigned char * outbuff;
+ int length;
+ int linelength;
+{
+ unsigned char byte , nib ;
+ int outlength = 0 ;
+
+ while (length)
+ {
+ if (outlength >= linelength) break ;
+ byte = *inbuf ;
+ inbuf++ ;
+ nib = byte >> 4 ;
+ *outbuff++ = hexlate[nib] ;
+ nib = byte &0x0f ;
+ *outbuff++ = hexlate[nib] ;
+ *outbuff++ = ' ' ;
+ length-- ;
+ outlength += 3 ;
+ }
+ *outbuff = '\0' ; /* null terminate our output line */
+ return outlength ;
+}
+
\f
/* Number of lines per page or UINT_MAX if paging is disabled. */
static unsigned int lines_per_page;
prompt_for_continue ()
{
char *ignore;
+ char cont_prompt[120];
+
+ if (annotation_level > 1)
+ printf_unfiltered ("\n\032\032pre-prompt-for-continue\n");
+
+ strcpy (cont_prompt,
+ "---Type <return> to continue, or q <return> to quit---");
+ if (annotation_level > 1)
+ strcat (cont_prompt, "\n\032\032prompt-for-continue\n");
/* We must do this *before* we call gdb_readline, else it will eventually
call us -- thinking that we're trying to print beyond the end of the
/* Call readline, not gdb_readline, because GO32 readline handles control-C
whereas control-C to gdb_readline will cause the user to get dumped
out to DOS. */
- ignore =
- readline ("---Type <return> to continue, or q <return> to quit---");
+ ignore = readline (cont_prompt);
+
+ if (annotation_level > 1)
+ printf_unfiltered ("\n\032\032post-prompt-for-continue\n");
+
if (ignore)
{
char *p = ignore;
wrap_here(indent)
char *indent;
{
+ /* This should have been allocated, but be paranoid anyway. */
+ if (!wrap_buffer)
+ abort ();
+
if (wrap_buffer[0])
{
*wrap_pointer = '\0';
- fputs (wrap_buffer, gdb_stdout);
+ fputs_unfiltered (wrap_buffer, gdb_stdout);
}
wrap_pointer = wrap_buffer;
wrap_buffer[0] = '\0';
gdb_flush (stream)
FILE *stream;
{
+ if (flush_hook
+ && (stream == gdb_stdout
+ || stream == gdb_stderr))
+ {
+ flush_hook (stream);
+ return;
+ }
+
fflush (stream);
}
if (linebuffer == 0)
return;
-
+
/* Don't do any filtering if it is disabled. */
if (stream != gdb_stdout
|| (lines_per_page == UINT_MAX && chars_per_line == UINT_MAX))
{
- fputs (linebuffer, stream);
+ fputs_unfiltered (linebuffer, stream);
return;
}
if (wrap_column)
*wrap_pointer++ = '\t';
else
- putc ('\t', stream);
+ fputc_unfiltered ('\t', stream);
/* Shifting right by 3 produces the number of tab stops
we have already passed, and then adding one and
shifting left 3 advances to the next tab stop. */
if (wrap_column)
*wrap_pointer++ = *lineptr;
else
- putc (*lineptr, stream);
+ fputc_unfiltered (*lineptr, stream);
chars_printed++;
lineptr++;
}
if chars_per_line is right, we probably just overflowed
anyway; if it's wrong, let us keep going. */
if (wrap_column)
- putc ('\n', stream);
+ fputc_unfiltered ('\n', stream);
/* Possible new page. */
if (lines_printed >= lines_per_page - 1)
/* Now output indentation and wrapped string */
if (wrap_column)
{
- fputs (wrap_indent, stream);
- *wrap_pointer = '\0'; /* Null-terminate saved stuff */
- fputs (wrap_buffer, stream); /* and eject it */
+ fputs_unfiltered (wrap_indent, stream);
+ *wrap_pointer = '\0'; /* Null-terminate saved stuff */
+ fputs_unfiltered (wrap_buffer, stream); /* and eject it */
/* FIXME, this strlen is what prevents wrap_indent from
containing tabs. However, if we recurse to print it
and count its chars, we risk trouble if wrap_indent is
chars_printed = 0;
wrap_here ((char *)0); /* Spit out chars, cancel further wraps */
lines_printed++;
- putc ('\n', stream);
+ fputc_unfiltered ('\n', stream);
lineptr++;
}
}
fputs_maybe_filtered (linebuffer, stream, 1);
}
-void
-fputs_unfiltered (linebuffer, stream)
- const char *linebuffer;
- FILE *stream;
-{
-#if 0
-
- /* This gets the wrap_buffer buffering wrong when called from
- gdb_readline (GDB was sometimes failing to print the prompt
- before reading input). Even at other times, it seems kind of
- misguided, especially now that printf_unfiltered doesn't use
- printf_maybe_filtered. */
-
- fputs_maybe_filtered (linebuffer, stream, 0);
-#else
- fputs (linebuffer, stream);
-#endif
-}
-
-void
-putc_unfiltered (c)
+int
+putchar_unfiltered (c)
int c;
{
char buf[2];
+
buf[0] = c;
buf[1] = 0;
fputs_unfiltered (buf, gdb_stdout);
+ return c;
}
-void
+int
fputc_unfiltered (c, stream)
int c;
FILE * stream;
{
char buf[2];
+
buf[0] = c;
buf[1] = 0;
fputs_unfiltered (buf, stream);
+ return c;
+}
+
+
+/* puts_debug is like fputs_unfiltered, except it prints special
+ characters in printable fashion. */
+
+void
+puts_debug (prefix, string, suffix)
+ char *prefix;
+ char *string;
+ char *suffix;
+{
+ int ch;
+
+ /* Print prefix and suffix after each line. */
+ static int new_line = 1;
+ static int carriage_return = 0;
+ static char *prev_prefix = "";
+ static char *prev_suffix = "";
+
+ if (*string == '\n')
+ carriage_return = 0;
+
+ /* If the prefix is changing, print the previous suffix, a new line,
+ and the new prefix. */
+ if ((carriage_return || (strcmp(prev_prefix, prefix) != 0)) && !new_line)
+ {
+ fputs_unfiltered (prev_suffix, gdb_stderr);
+ fputs_unfiltered ("\n", gdb_stderr);
+ fputs_unfiltered (prefix, gdb_stderr);
+ }
+
+ /* Print prefix if we printed a newline during the previous call. */
+ if (new_line)
+ {
+ new_line = 0;
+ fputs_unfiltered (prefix, gdb_stderr);
+ }
+
+ prev_prefix = prefix;
+ prev_suffix = suffix;
+
+ /* Output characters in a printable format. */
+ while ((ch = *string++) != '\0')
+ {
+ switch (ch)
+ {
+ default:
+ if (isprint (ch))
+ fputc_unfiltered (ch, gdb_stderr);
+
+ else
+ fprintf_unfiltered (gdb_stderr, "\\%03o", ch);
+ break;
+
+ case '\\': fputs_unfiltered ("\\\\", gdb_stderr); break;
+ case '\b': fputs_unfiltered ("\\b", gdb_stderr); break;
+ case '\f': fputs_unfiltered ("\\f", gdb_stderr); break;
+ case '\n': new_line = 1;
+ fputs_unfiltered ("\\n", gdb_stderr); break;
+ case '\r': fputs_unfiltered ("\\r", gdb_stderr); break;
+ case '\t': fputs_unfiltered ("\\t", gdb_stderr); break;
+ case '\v': fputs_unfiltered ("\\v", gdb_stderr); break;
+ }
+
+ carriage_return = ch == '\r';
+ }
+
+ /* Print suffix if we printed a newline. */
+ if (new_line)
+ {
+ fputs_unfiltered (suffix, gdb_stderr);
+ fputs_unfiltered ("\n", gdb_stderr);
+ }
}
/* Print a variable number of ARGS using format FORMAT. If this
information is going to put the amount written (since the last call
to REINITIALIZE_MORE_FILTER or the last page break) over the page size,
- print out a pause message and do a gdb_readline to get the users
- permision to continue.
+ call prompt_for_continue to get the users permision to continue.
Unlike fprintf, this function does not return a value.
We implement three variants, vfprintf (takes a vararg list and stream),
fprintf (takes a stream to write on), and printf (the usual).
- Note that this routine has a restriction that the length of the
- final output line must be less than 255 characters *or* it must be
- less than twice the size of the format string. This is a very
- arbitrary restriction, but it is an internal restriction, so I'll
- put it in. This means that the %s format specifier is almost
- useless; unless the caller can GUARANTEE that the string is short
- enough, fputs_filtered should be used instead.
-
Note also that a longjmp to top level may occur in this routine
(since prompt_for_continue may do so) so this routine should not be
called when cleanups are not in place. */
-#define MIN_LINEBUF 255
-
static void
vfprintf_maybe_filtered (stream, format, args, filter)
FILE *stream;
- char *format;
+ const char *format;
va_list args;
int filter;
{
- char line_buf[MIN_LINEBUF+10];
- char *linebuffer = line_buf;
- int format_length;
-
- format_length = strlen (format);
+ char *linebuffer;
+ struct cleanup *old_cleanups;
- /* Reallocate buffer to a larger size if this is necessary. */
- if (format_length * 2 > MIN_LINEBUF)
+ vasprintf (&linebuffer, format, args);
+ if (linebuffer == NULL)
{
- linebuffer = alloca (10 + format_length * 2);
+ fputs_unfiltered ("\ngdb: virtual memory exhausted.\n", gdb_stderr);
+ exit (1);
}
-
- /* This won't blow up if the restrictions described above are
- followed. */
- vsprintf (linebuffer, format, args);
-
+ old_cleanups = make_cleanup (free, linebuffer);
fputs_maybe_filtered (linebuffer, stream, filter);
+ do_cleanups (old_cleanups);
}
void
vfprintf_filtered (stream, format, args)
FILE *stream;
- char *format;
+ const char *format;
va_list args;
{
vfprintf_maybe_filtered (stream, format, args, 1);
void
vfprintf_unfiltered (stream, format, args)
FILE *stream;
- char *format;
+ const char *format;
va_list args;
{
- vfprintf (stream, format, args);
+ char *linebuffer;
+ struct cleanup *old_cleanups;
+
+ vasprintf (&linebuffer, format, args);
+ if (linebuffer == NULL)
+ {
+ fputs_unfiltered ("\ngdb: virtual memory exhausted.\n", gdb_stderr);
+ exit (1);
+ }
+ old_cleanups = make_cleanup (free, linebuffer);
+ fputs_unfiltered (linebuffer, stream);
+ do_cleanups (old_cleanups);
}
void
vprintf_filtered (format, args)
- char *format;
+ const char *format;
va_list args;
{
vfprintf_maybe_filtered (gdb_stdout, format, args, 1);
void
vprintf_unfiltered (format, args)
- char *format;
+ const char *format;
va_list args;
{
- vfprintf (gdb_stdout, format, args);
+ vfprintf_unfiltered (gdb_stdout, format, args);
}
/* VARARGS */
void
+#ifdef ANSI_PROTOTYPES
+fprintf_filtered (FILE *stream, const char *format, ...)
+#else
fprintf_filtered (va_alist)
va_dcl
+#endif
{
va_list args;
+#ifdef ANSI_PROTOTYPES
+ va_start (args, format);
+#else
FILE *stream;
char *format;
va_start (args);
stream = va_arg (args, FILE *);
format = va_arg (args, char *);
-
- /* This won't blow up if the restrictions described above are
- followed. */
+#endif
vfprintf_filtered (stream, format, args);
va_end (args);
}
/* VARARGS */
void
+#ifdef ANSI_PROTOTYPES
+fprintf_unfiltered (FILE *stream, const char *format, ...)
+#else
fprintf_unfiltered (va_alist)
va_dcl
+#endif
{
va_list args;
+#ifdef ANSI_PROTOTYPES
+ va_start (args, format);
+#else
FILE *stream;
char *format;
va_start (args);
stream = va_arg (args, FILE *);
format = va_arg (args, char *);
-
- /* This won't blow up if the restrictions described above are
- followed. */
+#endif
vfprintf_unfiltered (stream, format, args);
va_end (args);
}
-/* Like fprintf_filtered, but prints it's result indent.
+/* Like fprintf_filtered, but prints its result indented.
Called as fprintfi_filtered (spaces, stream, format, ...); */
/* VARARGS */
void
+#ifdef ANSI_PROTOTYPES
+fprintfi_filtered (int spaces, FILE *stream, const char *format, ...)
+#else
fprintfi_filtered (va_alist)
va_dcl
+#endif
{
va_list args;
+#ifdef ANSI_PROTOTYPES
+ va_start (args, format);
+#else
int spaces;
FILE *stream;
char *format;
spaces = va_arg (args, int);
stream = va_arg (args, FILE *);
format = va_arg (args, char *);
+#endif
print_spaces_filtered (spaces, stream);
- /* This won't blow up if the restrictions described above are
- followed. */
vfprintf_filtered (stream, format, args);
va_end (args);
}
/* VARARGS */
void
+#ifdef ANSI_PROTOTYPES
+printf_filtered (const char *format, ...)
+#else
printf_filtered (va_alist)
va_dcl
+#endif
{
va_list args;
+#ifdef ANSI_PROTOTYPES
+ va_start (args, format);
+#else
char *format;
va_start (args);
format = va_arg (args, char *);
-
+#endif
vfprintf_filtered (gdb_stdout, format, args);
va_end (args);
}
/* VARARGS */
void
+#ifdef ANSI_PROTOTYPES
+printf_unfiltered (const char *format, ...)
+#else
printf_unfiltered (va_alist)
va_dcl
+#endif
{
va_list args;
+#ifdef ANSI_PROTOTYPES
+ va_start (args, format);
+#else
char *format;
va_start (args);
format = va_arg (args, char *);
-
+#endif
vfprintf_unfiltered (gdb_stdout, format, args);
va_end (args);
}
/* VARARGS */
void
+#ifdef ANSI_PROTOTYPES
+printfi_filtered (int spaces, const char *format, ...)
+#else
printfi_filtered (va_alist)
va_dcl
+#endif
{
va_list args;
+#ifdef ANSI_PROTOTYPES
+ va_start (args, format);
+#else
int spaces;
char *format;
va_start (args);
spaces = va_arg (args, int);
format = va_arg (args, char *);
+#endif
print_spaces_filtered (spaces, gdb_stdout);
vfprintf_filtered (gdb_stdout, format, args);
va_end (args);
void
puts_filtered (string)
- char *string;
+ const char *string;
{
fputs_filtered (string, gdb_stdout);
}
void
puts_unfiltered (string)
- char *string;
+ const char *string;
{
fputs_unfiltered (string, gdb_stdout);
}
case language_cplus:
demangled = cplus_demangle (name, arg_mode);
break;
+ case language_java:
+ demangled = cplus_demangle (name, arg_mode | DMGL_JAVA);
+ break;
case language_chill:
demangled = chill_demangle (name);
break;
\f
void
-_initialize_utils ()
+initialize_utils ()
{
struct cmd_list_element *c;
#else
lines_per_page = 24;
chars_per_line = 80;
+
+#if !defined (MPW) && !defined (_WIN32)
+ /* No termcap under MPW, although might be cool to do something
+ by looking at worksheet or console window sizes. */
/* Initialize the screen height and width from termcap. */
{
char *termtype = getenv ("TERM");
}
}
}
+#endif /* MPW */
#if defined(SIGWINCH) && defined(SIGWINCH_HANDLER)
#ifdef SIGWINCH_HANDLER_BODY
SIGWINCH_HANDLER_BODY
#endif
+\f
+/* Support for converting target fp numbers into host DOUBLEST format. */
+
+/* XXX - This code should really be in libiberty/floatformat.c, however
+ configuration issues with libiberty made this very difficult to do in the
+ available time. */
+
+#include "floatformat.h"
+#include <math.h> /* ldexp */
+
+/* The odds that CHAR_BIT will be anything but 8 are low enough that I'm not
+ going to bother with trying to muck around with whether it is defined in
+ a system header, what we do if not, etc. */
+#define FLOATFORMAT_CHAR_BIT 8
+
+static unsigned long get_field PARAMS ((unsigned char *,
+ enum floatformat_byteorders,
+ unsigned int,
+ unsigned int,
+ unsigned int));
+
+/* Extract a field which starts at START and is LEN bytes long. DATA and
+ TOTAL_LEN are the thing we are extracting it from, in byteorder ORDER. */
+static unsigned long
+get_field (data, order, total_len, start, len)
+ unsigned char *data;
+ enum floatformat_byteorders order;
+ unsigned int total_len;
+ unsigned int start;
+ unsigned int len;
+{
+ unsigned long result;
+ unsigned int cur_byte;
+ int cur_bitshift;
+
+ /* Start at the least significant part of the field. */
+ cur_byte = (start + len) / FLOATFORMAT_CHAR_BIT;
+ if (order == floatformat_little || order == floatformat_littlebyte_bigword)
+ cur_byte = (total_len / FLOATFORMAT_CHAR_BIT) - cur_byte - 1;
+ cur_bitshift =
+ ((start + len) % FLOATFORMAT_CHAR_BIT) - FLOATFORMAT_CHAR_BIT;
+ result = *(data + cur_byte) >> (-cur_bitshift);
+ cur_bitshift += FLOATFORMAT_CHAR_BIT;
+ if (order == floatformat_little || order == floatformat_littlebyte_bigword)
+ ++cur_byte;
+ else
+ --cur_byte;
+
+ /* Move towards the most significant part of the field. */
+ while (cur_bitshift < len)
+ {
+ if (len - cur_bitshift < FLOATFORMAT_CHAR_BIT)
+ /* This is the last byte; zero out the bits which are not part of
+ this field. */
+ result |=
+ (*(data + cur_byte) & ((1 << (len - cur_bitshift)) - 1))
+ << cur_bitshift;
+ else
+ result |= *(data + cur_byte) << cur_bitshift;
+ cur_bitshift += FLOATFORMAT_CHAR_BIT;
+ if (order == floatformat_little || order == floatformat_littlebyte_bigword)
+ ++cur_byte;
+ else
+ --cur_byte;
+ }
+ return result;
+}
+
+/* Convert from FMT to a DOUBLEST.
+ FROM is the address of the extended float.
+ Store the DOUBLEST in *TO. */
+
+void
+floatformat_to_doublest (fmt, from, to)
+ const struct floatformat *fmt;
+ char *from;
+ DOUBLEST *to;
+{
+ unsigned char *ufrom = (unsigned char *)from;
+ DOUBLEST dto;
+ long exponent;
+ unsigned long mant;
+ unsigned int mant_bits, mant_off;
+ int mant_bits_left;
+ int special_exponent; /* It's a NaN, denorm or zero */
+
+ /* If the mantissa bits are not contiguous from one end of the
+ mantissa to the other, we need to make a private copy of the
+ source bytes that is in the right order since the unpacking
+ algorithm assumes that the bits are contiguous.
+
+ Swap the bytes individually rather than accessing them through
+ "long *" since we have no guarantee that they start on a long
+ alignment, and also sizeof(long) for the host could be different
+ than sizeof(long) for the target. FIXME: Assumes sizeof(long)
+ for the target is 4. */
+
+ if (fmt -> byteorder == floatformat_littlebyte_bigword)
+ {
+ static unsigned char *newfrom;
+ unsigned char *swapin, *swapout;
+ int longswaps;
+
+ longswaps = fmt -> totalsize / FLOATFORMAT_CHAR_BIT;
+ longswaps >>= 3;
+
+ if (newfrom == NULL)
+ {
+ newfrom = xmalloc (fmt -> totalsize);
+ }
+ swapout = newfrom;
+ swapin = ufrom;
+ ufrom = newfrom;
+ while (longswaps-- > 0)
+ {
+ /* This is ugly, but efficient */
+ *swapout++ = swapin[4];
+ *swapout++ = swapin[5];
+ *swapout++ = swapin[6];
+ *swapout++ = swapin[7];
+ *swapout++ = swapin[0];
+ *swapout++ = swapin[1];
+ *swapout++ = swapin[2];
+ *swapout++ = swapin[3];
+ swapin += 8;
+ }
+ }
+
+ exponent = get_field (ufrom, fmt->byteorder, fmt->totalsize,
+ fmt->exp_start, fmt->exp_len);
+ /* Note that if exponent indicates a NaN, we can't really do anything useful
+ (not knowing if the host has NaN's, or how to build one). So it will
+ end up as an infinity or something close; that is OK. */
+
+ mant_bits_left = fmt->man_len;
+ mant_off = fmt->man_start;
+ dto = 0.0;
+
+ special_exponent = exponent == 0 || exponent == fmt->exp_nan;
+
+/* Don't bias zero's, denorms or NaNs. */
+ if (!special_exponent)
+ exponent -= fmt->exp_bias;
+
+ /* Build the result algebraically. Might go infinite, underflow, etc;
+ who cares. */
+
+/* If this format uses a hidden bit, explicitly add it in now. Otherwise,
+ increment the exponent by one to account for the integer bit. */
+
+ if (!special_exponent)
+ if (fmt->intbit == floatformat_intbit_no)
+ dto = ldexp (1.0, exponent);
+ else
+ exponent++;
+
+ while (mant_bits_left > 0)
+ {
+ mant_bits = min (mant_bits_left, 32);
+
+ mant = get_field (ufrom, fmt->byteorder, fmt->totalsize,
+ mant_off, mant_bits);
+
+ dto += ldexp ((double)mant, exponent - mant_bits);
+ exponent -= mant_bits;
+ mant_off += mant_bits;
+ mant_bits_left -= mant_bits;
+ }
+
+ /* Negate it if negative. */
+ if (get_field (ufrom, fmt->byteorder, fmt->totalsize, fmt->sign_start, 1))
+ dto = -dto;
+ *to = dto;
+}
+\f
+static void put_field PARAMS ((unsigned char *, enum floatformat_byteorders,
+ unsigned int,
+ unsigned int,
+ unsigned int,
+ unsigned long));
+
+/* Set a field which starts at START and is LEN bytes long. DATA and
+ TOTAL_LEN are the thing we are extracting it from, in byteorder ORDER. */
+static void
+put_field (data, order, total_len, start, len, stuff_to_put)
+ unsigned char *data;
+ enum floatformat_byteorders order;
+ unsigned int total_len;
+ unsigned int start;
+ unsigned int len;
+ unsigned long stuff_to_put;
+{
+ unsigned int cur_byte;
+ int cur_bitshift;
+
+ /* Start at the least significant part of the field. */
+ cur_byte = (start + len) / FLOATFORMAT_CHAR_BIT;
+ if (order == floatformat_little || order == floatformat_littlebyte_bigword)
+ cur_byte = (total_len / FLOATFORMAT_CHAR_BIT) - cur_byte - 1;
+ cur_bitshift =
+ ((start + len) % FLOATFORMAT_CHAR_BIT) - FLOATFORMAT_CHAR_BIT;
+ *(data + cur_byte) &=
+ ~(((1 << ((start + len) % FLOATFORMAT_CHAR_BIT)) - 1) << (-cur_bitshift));
+ *(data + cur_byte) |=
+ (stuff_to_put & ((1 << FLOATFORMAT_CHAR_BIT) - 1)) << (-cur_bitshift);
+ cur_bitshift += FLOATFORMAT_CHAR_BIT;
+ if (order == floatformat_little || order == floatformat_littlebyte_bigword)
+ ++cur_byte;
+ else
+ --cur_byte;
+
+ /* Move towards the most significant part of the field. */
+ while (cur_bitshift < len)
+ {
+ if (len - cur_bitshift < FLOATFORMAT_CHAR_BIT)
+ {
+ /* This is the last byte. */
+ *(data + cur_byte) &=
+ ~((1 << (len - cur_bitshift)) - 1);
+ *(data + cur_byte) |= (stuff_to_put >> cur_bitshift);
+ }
+ else
+ *(data + cur_byte) = ((stuff_to_put >> cur_bitshift)
+ & ((1 << FLOATFORMAT_CHAR_BIT) - 1));
+ cur_bitshift += FLOATFORMAT_CHAR_BIT;
+ if (order == floatformat_little || order == floatformat_littlebyte_bigword)
+ ++cur_byte;
+ else
+ --cur_byte;
+ }
+}
+
+#ifdef HAVE_LONG_DOUBLE
+/* Return the fractional part of VALUE, and put the exponent of VALUE in *EPTR.
+ The range of the returned value is >= 0.5 and < 1.0. This is equivalent to
+ frexp, but operates on the long double data type. */
+
+static long double ldfrexp PARAMS ((long double value, int *eptr));
+
+static long double
+ldfrexp (value, eptr)
+ long double value;
+ int *eptr;
+{
+ long double tmp;
+ int exp;
+
+ /* Unfortunately, there are no portable functions for extracting the exponent
+ of a long double, so we have to do it iteratively by multiplying or dividing
+ by two until the fraction is between 0.5 and 1.0. */
+
+ if (value < 0.0l)
+ value = -value;
+
+ tmp = 1.0l;
+ exp = 0;
+
+ if (value >= tmp) /* Value >= 1.0 */
+ while (value >= tmp)
+ {
+ tmp *= 2.0l;
+ exp++;
+ }
+ else if (value != 0.0l) /* Value < 1.0 and > 0.0 */
+ {
+ while (value < tmp)
+ {
+ tmp /= 2.0l;
+ exp--;
+ }
+ tmp *= 2.0l;
+ exp++;
+ }
+
+ *eptr = exp;
+ return value/tmp;
+}
+#endif /* HAVE_LONG_DOUBLE */
+
+
+/* The converse: convert the DOUBLEST *FROM to an extended float
+ and store where TO points. Neither FROM nor TO have any alignment
+ restrictions. */
+
+void
+floatformat_from_doublest (fmt, from, to)
+ CONST struct floatformat *fmt;
+ DOUBLEST *from;
+ char *to;
+{
+ DOUBLEST dfrom;
+ int exponent;
+ DOUBLEST mant;
+ unsigned int mant_bits, mant_off;
+ int mant_bits_left;
+ unsigned char *uto = (unsigned char *)to;
+
+ memcpy (&dfrom, from, sizeof (dfrom));
+ memset (uto, 0, fmt->totalsize / FLOATFORMAT_CHAR_BIT);
+ if (dfrom == 0)
+ return; /* Result is zero */
+ if (dfrom != dfrom) /* Result is NaN */
+ {
+ /* From is NaN */
+ put_field (uto, fmt->byteorder, fmt->totalsize, fmt->exp_start,
+ fmt->exp_len, fmt->exp_nan);
+ /* Be sure it's not infinity, but NaN value is irrel */
+ put_field (uto, fmt->byteorder, fmt->totalsize, fmt->man_start,
+ 32, 1);
+ return;
+ }
+
+ /* If negative, set the sign bit. */
+ if (dfrom < 0)
+ {
+ put_field (uto, fmt->byteorder, fmt->totalsize, fmt->sign_start, 1, 1);
+ dfrom = -dfrom;
+ }
+
+ if (dfrom + dfrom == dfrom && dfrom != 0.0) /* Result is Infinity */
+ {
+ /* Infinity exponent is same as NaN's. */
+ put_field (uto, fmt->byteorder, fmt->totalsize, fmt->exp_start,
+ fmt->exp_len, fmt->exp_nan);
+ /* Infinity mantissa is all zeroes. */
+ put_field (uto, fmt->byteorder, fmt->totalsize, fmt->man_start,
+ fmt->man_len, 0);
+ return;
+ }
+
+#ifdef HAVE_LONG_DOUBLE
+ mant = ldfrexp (dfrom, &exponent);
+#else
+ mant = frexp (dfrom, &exponent);
+#endif
+
+ put_field (uto, fmt->byteorder, fmt->totalsize, fmt->exp_start, fmt->exp_len,
+ exponent + fmt->exp_bias - 1);
+
+ mant_bits_left = fmt->man_len;
+ mant_off = fmt->man_start;
+ while (mant_bits_left > 0)
+ {
+ unsigned long mant_long;
+ mant_bits = mant_bits_left < 32 ? mant_bits_left : 32;
+
+ mant *= 4294967296.0;
+ mant_long = (unsigned long)mant;
+ mant -= mant_long;
+
+ /* If the integer bit is implicit, then we need to discard it.
+ If we are discarding a zero, we should be (but are not) creating
+ a denormalized number which means adjusting the exponent
+ (I think). */
+ if (mant_bits_left == fmt->man_len
+ && fmt->intbit == floatformat_intbit_no)
+ {
+ mant_long <<= 1;
+ mant_bits -= 1;
+ }
+
+ if (mant_bits < 32)
+ {
+ /* The bits we want are in the most significant MANT_BITS bits of
+ mant_long. Move them to the least significant. */
+ mant_long >>= 32 - mant_bits;
+ }
+ put_field (uto, fmt->byteorder, fmt->totalsize,
+ mant_off, mant_bits, mant_long);
+ mant_off += mant_bits;
+ mant_bits_left -= mant_bits;
+ }
+ if (fmt -> byteorder == floatformat_littlebyte_bigword)
+ {
+ int count;
+ unsigned char *swaplow = uto;
+ unsigned char *swaphigh = uto + 4;
+ unsigned char tmp;
+
+ for (count = 0; count < 4; count++)
+ {
+ tmp = *swaplow;
+ *swaplow++ = *swaphigh;
+ *swaphigh++ = tmp;
+ }
+ }
+}
+
+/* temporary storage using circular buffer */
+#define NUMCELLS 16
+#define CELLSIZE 32
+static char*
+get_cell()
+{
+ static char buf[NUMCELLS][CELLSIZE];
+ static int cell=0;
+ if (++cell>=NUMCELLS) cell=0;
+ return buf[cell];
+}
+
+/* print routines to handle variable size regs, etc.
+
+ FIXME: Note that t_addr is a bfd_vma, which is currently either an
+ unsigned long or unsigned long long, determined at configure time.
+ If t_addr is an unsigned long long and sizeof (unsigned long long)
+ is greater than sizeof (unsigned long), then I believe this code will
+ probably lose, at least for little endian machines. I believe that
+ it would also be better to eliminate the switch on the absolute size
+ of t_addr and replace it with a sequence of if statements that compare
+ sizeof t_addr with sizeof the various types and do the right thing,
+ which includes knowing whether or not the host supports long long.
+ -fnf
+
+ */
+
+static int thirty_two = 32; /* eliminate warning from compiler on 32-bit systems */
+
+char*
+paddr(addr)
+ t_addr addr;
+{
+ char *paddr_str=get_cell();
+ switch (sizeof(t_addr))
+ {
+ case 8:
+ sprintf (paddr_str, "%08lx%08lx",
+ (unsigned long) (addr >> thirty_two), (unsigned long) (addr & 0xffffffff));
+ break;
+ case 4:
+ sprintf (paddr_str, "%08lx", (unsigned long) addr);
+ break;
+ case 2:
+ sprintf (paddr_str, "%04x", (unsigned short) (addr & 0xffff));
+ break;
+ default:
+ sprintf (paddr_str, "%lx", (unsigned long) addr);
+ }
+ return paddr_str;
+}
+
+char*
+preg(reg)
+ t_reg reg;
+{
+ char *preg_str=get_cell();
+ switch (sizeof(t_reg))
+ {
+ case 8:
+ sprintf (preg_str, "%08lx%08lx",
+ (unsigned long) (reg >> thirty_two), (unsigned long) (reg & 0xffffffff));
+ break;
+ case 4:
+ sprintf (preg_str, "%08lx", (unsigned long) reg);
+ break;
+ case 2:
+ sprintf (preg_str, "%04x", (unsigned short) (reg & 0xffff));
+ break;
+ default:
+ sprintf (preg_str, "%lx", (unsigned long) reg);
+ }
+ return preg_str;
+}
+
+char*
+paddr_nz(addr)
+ t_addr addr;
+{
+ char *paddr_str=get_cell();
+ switch (sizeof(t_addr))
+ {
+ case 8:
+ {
+ unsigned long high = (unsigned long) (addr >> thirty_two);
+ if (high == 0)
+ sprintf (paddr_str, "%lx", (unsigned long) (addr & 0xffffffff));
+ else
+ sprintf (paddr_str, "%lx%08lx",
+ high, (unsigned long) (addr & 0xffffffff));
+ break;
+ }
+ case 4:
+ sprintf (paddr_str, "%lx", (unsigned long) addr);
+ break;
+ case 2:
+ sprintf (paddr_str, "%x", (unsigned short) (addr & 0xffff));
+ break;
+ default:
+ sprintf (paddr_str,"%lx", (unsigned long) addr);
+ }
+ return paddr_str;
+}
+
+char*
+preg_nz(reg)
+ t_reg reg;
+{
+ char *preg_str=get_cell();
+ switch (sizeof(t_reg))
+ {
+ case 8:
+ {
+ unsigned long high = (unsigned long) (reg >> thirty_two);
+ if (high == 0)
+ sprintf (preg_str, "%lx", (unsigned long) (reg & 0xffffffff));
+ else
+ sprintf (preg_str, "%lx%08lx",
+ high, (unsigned long) (reg & 0xffffffff));
+ break;
+ }
+ case 4:
+ sprintf (preg_str, "%lx", (unsigned long) reg);
+ break;
+ case 2:
+ sprintf (preg_str, "%x", (unsigned short) (reg & 0xffff));
+ break;
+ default:
+ sprintf (preg_str, "%lx", (unsigned long) reg);
+ }
+ return preg_str;
+}