/* General utility routines for GDB, the GNU debugger.
- Copyright 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
- 1996, 1997, 1998, 1999, 2000, 2001, 2002
- Free Software Foundation, Inc.
+
+ Copyright (C) 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
+ 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free
+ Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
-
-#include "config.h"
-
-/* Include before "bfd.h" so that we get stdbool.h in time, if <curses.h>
- brings it in. */
-#ifdef HAVE_CURSES_H
-#include <curses.h>
-#endif
-#ifdef HAVE_TERM_H
-#include <term.h>
-#endif
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
#include "defs.h"
#include "gdb_assert.h"
#include <ctype.h>
#include "gdb_string.h"
#include "event-top.h"
+#include "exceptions.h"
+
+#ifdef TUI
+#include "tui/tui.h" /* For tui_get_command_dimension. */
+#endif
#ifdef __GO32__
#include <pc.h>
#include "demangle.h"
#include "expression.h"
#include "language.h"
+#include "charset.h"
#include "annotate.h"
+#include "filenames.h"
+#include "symfile.h"
-#include "inferior.h" /* for signed_pointer_to_address */
+#include "inferior.h" /* for signed_pointer_to_address */
#include <sys/param.h> /* For MAXPATHLEN */
-#include <readline/readline.h>
+#include "gdb_curses.h"
-#ifdef USE_MMALLOC
-#include "mmalloc.h"
-#endif
+#include "readline/readline.h"
-#ifdef NEED_DECLARATION_MALLOC
-extern PTR malloc ();
+#if !HAVE_DECL_MALLOC
+extern PTR malloc (); /* OK: PTR */
#endif
-#ifdef NEED_DECLARATION_REALLOC
-extern PTR realloc ();
+#if !HAVE_DECL_REALLOC
+extern PTR realloc (); /* OK: PTR */
#endif
-#ifdef NEED_DECLARATION_FREE
+#if !HAVE_DECL_FREE
extern void free ();
#endif
-#undef XMALLOC
-#define XMALLOC(TYPE) ((TYPE*) xmalloc (sizeof (TYPE)))
-
/* readline defines this. */
#undef savestring
-void (*error_begin_hook) (void);
-
-/* Holds the last error message issued by gdb */
-
-static struct ui_file *gdb_lasterr;
+void (*deprecated_error_begin_hook) (void);
/* Prototypes for local functions */
static void vfprintf_maybe_filtered (struct ui_file *, const char *,
- va_list, int);
+ va_list, int) ATTR_FORMAT (printf, 2, 0);
static void fputs_maybe_filtered (const char *, struct ui_file *, int);
-#if defined (USE_MMALLOC) && !defined (NO_MMCHECK)
-static void malloc_botch (void);
-#endif
+static void do_my_cleanups (struct cleanup **, struct cleanup *);
static void prompt_for_continue (void);
-static void set_width_command (char *, int, struct cmd_list_element *);
-
+static void set_screen_size (void);
static void set_width (void);
/* Chain of cleanup actions established with make_cleanup,
static struct cleanup *run_cleanup_chain; /* cleaned up on each 'run' */
static struct cleanup *exec_cleanup_chain; /* cleaned up on each execution command */
/* cleaned up on each error from within an execution command */
-static struct cleanup *exec_error_cleanup_chain;
+static struct cleanup *exec_error_cleanup_chain;
/* Pointer to what is left to do for an execution command after the
target stops. Used only in asynchronous mode, by targets that
int immediate_quit;
-/* Nonzero means that encoded C++ names should be printed out in their
- C++ form rather than raw. */
+/* Nonzero means that encoded C++/ObjC names should be printed out in their
+ C++/ObjC form rather than raw. */
int demangle = 1;
+static void
+show_demangle (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Demangling of encoded C++/ObjC names when displaying symbols is %s.\n"),
+ value);
+}
-/* Nonzero means that encoded C++ names should be printed out in their
- C++ form even in assembler language displays. If this is set, but
+/* Nonzero means that encoded C++/ObjC names should be printed out in their
+ C++/ObjC form even in assembler language displays. If this is set, but
DEMANGLE is zero, names are printed raw, i.e. DEMANGLE controls. */
int asm_demangle = 0;
+static void
+show_asm_demangle (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Demangling of C++/ObjC names in disassembly listings is %s.\n"),
+ value);
+}
/* Nonzero means that strings with character values >0x7F should be printed
as octal escapes. Zero means just print the value (e.g. it's an
international character, and the terminal or window can cope.) */
int sevenbit_strings = 0;
+static void
+show_sevenbit_strings (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Printing of 8-bit characters in strings as \\nnn is %s.\n"),
+ value);
+}
/* String to be printed before error messages, if any. */
char *warning_pre_print = "\nwarning: ";
int pagination_enabled = 1;
+static void
+show_pagination_enabled (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("State of pagination is %s.\n"), value);
+}
+
\f
/* Add a new cleanup to the cleanup_chain,
return make_my_cleanup (&cleanup_chain, do_ui_file_delete, arg);
}
+static void
+do_free_section_addr_info (void *arg)
+{
+ free_section_addr_info (arg);
+}
+
+struct cleanup *
+make_cleanup_free_section_addr_info (struct section_addr_info *addrs)
+{
+ return make_my_cleanup (&cleanup_chain, do_free_section_addr_info, addrs);
+}
+
+
struct cleanup *
make_my_cleanup (struct cleanup **pmy_chain, make_cleanup_ftype *function,
void *arg)
{
- register struct cleanup *new
- = (struct cleanup *) xmalloc (sizeof (struct cleanup));
- register struct cleanup *old_chain = *pmy_chain;
+ struct cleanup *new
+ = (struct cleanup *) xmalloc (sizeof (struct cleanup));
+ struct cleanup *old_chain = *pmy_chain;
new->next = *pmy_chain;
new->function = function;
until we get back to the point OLD_CHAIN in the cleanup_chain. */
void
-do_cleanups (register struct cleanup *old_chain)
+do_cleanups (struct cleanup *old_chain)
{
do_my_cleanups (&cleanup_chain, old_chain);
}
void
-do_final_cleanups (register struct cleanup *old_chain)
+do_final_cleanups (struct cleanup *old_chain)
{
do_my_cleanups (&final_cleanup_chain, old_chain);
}
void
-do_run_cleanups (register struct cleanup *old_chain)
+do_run_cleanups (struct cleanup *old_chain)
{
do_my_cleanups (&run_cleanup_chain, old_chain);
}
void
-do_exec_cleanups (register struct cleanup *old_chain)
+do_exec_cleanups (struct cleanup *old_chain)
{
do_my_cleanups (&exec_cleanup_chain, old_chain);
}
void
-do_exec_error_cleanups (register struct cleanup *old_chain)
+do_exec_error_cleanups (struct cleanup *old_chain)
{
do_my_cleanups (&exec_error_cleanup_chain, old_chain);
}
-void
-do_my_cleanups (register struct cleanup **pmy_chain,
- register struct cleanup *old_chain)
+static void
+do_my_cleanups (struct cleanup **pmy_chain,
+ struct cleanup *old_chain)
{
- register struct cleanup *ptr;
+ struct cleanup *ptr;
while ((ptr = *pmy_chain) != old_chain)
{
*pmy_chain = ptr->next; /* Do this first incase recursion */
until we get back to the point OLD_CHAIN in the cleanup_chain. */
void
-discard_cleanups (register struct cleanup *old_chain)
+discard_cleanups (struct cleanup *old_chain)
{
discard_my_cleanups (&cleanup_chain, old_chain);
}
void
-discard_final_cleanups (register struct cleanup *old_chain)
+discard_final_cleanups (struct cleanup *old_chain)
{
discard_my_cleanups (&final_cleanup_chain, old_chain);
}
void
-discard_exec_error_cleanups (register struct cleanup *old_chain)
+discard_exec_error_cleanups (struct cleanup *old_chain)
{
discard_my_cleanups (&exec_error_cleanup_chain, old_chain);
}
void
-discard_my_cleanups (register struct cleanup **pmy_chain,
- register struct cleanup *old_chain)
+discard_my_cleanups (struct cleanup **pmy_chain,
+ struct cleanup *old_chain)
{
- register struct cleanup *ptr;
+ struct cleanup *ptr;
while ((ptr = *pmy_chain) != old_chain)
{
*pmy_chain = ptr->next;
void **location = ptr;
if (location == NULL)
internal_error (__FILE__, __LINE__,
- "free_current_contents: NULL pointer");
+ _("free_current_contents: NULL pointer"));
if (*location != NULL)
{
xfree (*location);
In such cases, we may not be certain where the first cleanup is, unless
we have a do-nothing one to always use as the base. */
-/* ARGSUSED */
void
null_cleanup (void *arg)
{
{
struct continuation *continuation_ptr;
- continuation_ptr = (struct continuation *) xmalloc (sizeof (struct continuation));
+ continuation_ptr =
+ (struct continuation *) xmalloc (sizeof (struct continuation));
continuation_ptr->continuation_hook = continuation_hook;
continuation_ptr->arg_list = arg_list;
continuation_ptr->next = cmd_continuation;
before we have a chance of exhausting those that were already
there. We need to then save the beginning of the list in a pointer
and do the continuations from there on, instead of using the
- global beginning of list as our iteration pointer.*/
+ global beginning of list as our iteration pointer. */
void
do_all_continuations (void)
{
continuation_ptr = cmd_continuation;
cmd_continuation = NULL;
- /* Work now on the list we have set aside. */
+ /* Work now on the list we have set aside. */
while (continuation_ptr)
- {
- (continuation_ptr->continuation_hook) (continuation_ptr->arg_list);
- saved_continuation = continuation_ptr;
- continuation_ptr = continuation_ptr->next;
- xfree (saved_continuation);
- }
+ {
+ (continuation_ptr->continuation_hook) (continuation_ptr->arg_list);
+ saved_continuation = continuation_ptr;
+ continuation_ptr = continuation_ptr->next;
+ xfree (saved_continuation);
+ }
}
/* Walk down the cmd_continuation list, and get rid of all the
}
/* Add a continuation to the continuation list, the global list
- intermediate_continuation. The new continuation will be added at the front.*/
+ intermediate_continuation. The new continuation will be added at
+ the front. */
void
add_intermediate_continuation (void (*continuation_hook)
(struct continuation_arg *),
{
struct continuation *continuation_ptr;
- continuation_ptr = (struct continuation *) xmalloc (sizeof (struct continuation));
+ continuation_ptr =
+ (struct continuation *) xmalloc (sizeof (struct continuation));
continuation_ptr->continuation_hook = continuation_hook;
continuation_ptr->arg_list = arg_list;
continuation_ptr->next = intermediate_continuation;
continuation_ptr = intermediate_continuation;
intermediate_continuation = NULL;
- /* Work now on the list we have set aside. */
+ /* Work now on the list we have set aside. */
while (continuation_ptr)
- {
- (continuation_ptr->continuation_hook) (continuation_ptr->arg_list);
- saved_continuation = continuation_ptr;
- continuation_ptr = continuation_ptr->next;
- xfree (saved_continuation);
- }
+ {
+ (continuation_ptr->continuation_hook) (continuation_ptr->arg_list);
+ saved_continuation = continuation_ptr;
+ continuation_ptr = continuation_ptr->next;
+ xfree (saved_continuation);
+ }
}
/* Walk down the cmd_continuation list, and get rid of all the
xfree (continuation_ptr);
}
}
-
\f
+
/* Print a warning message. The first argument STRING is the warning
message, used as an fprintf format string, the second is the
va_list of arguments for that string. A warning is unfiltered (not
void
vwarning (const char *string, va_list args)
{
- if (warning_hook)
- (*warning_hook) (string, args);
+ if (deprecated_warning_hook)
+ (*deprecated_warning_hook) (string, args);
else
{
target_terminal_ours ();
wrap_here (""); /* Force out any buffered output */
gdb_flush (gdb_stdout);
if (warning_pre_print)
- fprintf_unfiltered (gdb_stderr, warning_pre_print);
+ fputs_unfiltered (warning_pre_print, gdb_stderr);
vfprintf_unfiltered (gdb_stderr, string, args);
fprintf_unfiltered (gdb_stderr, "\n");
va_end (args);
does not force the return to command level. */
void
-warning (const char *string,...)
+warning (const char *string, ...)
{
va_list args;
va_start (args, string);
NORETURN void
verror (const char *string, va_list args)
{
- struct ui_file *tmp_stream = mem_fileopen ();
- make_cleanup_ui_file_delete (tmp_stream);
- vfprintf_unfiltered (tmp_stream, string, args);
- error_stream (tmp_stream);
+ throw_verror (GENERIC_ERROR, string, args);
}
NORETURN void
-error (const char *string,...)
+error (const char *string, ...)
{
va_list args;
va_start (args, string);
- verror (string, args);
+ throw_verror (GENERIC_ERROR, string, args);
va_end (args);
}
-static void
-do_write (void *data, const char *buffer, long length_buffer)
+/* Print an error message and quit.
+ The first argument STRING is the error message, used as a fprintf string,
+ and the remaining args are passed as arguments to it. */
+
+NORETURN void
+vfatal (const char *string, va_list args)
{
- ui_file_write (data, buffer, length_buffer);
+ throw_vfatal (string, args);
}
NORETURN void
-error_stream (struct ui_file *stream)
+fatal (const char *string, ...)
{
- if (error_begin_hook)
- error_begin_hook ();
-
- /* Copy the stream into the GDB_LASTERR buffer. */
- ui_file_rewind (gdb_lasterr);
- ui_file_put (stream, do_write, gdb_lasterr);
-
- /* Write the message plus any error_pre_print to gdb_stderr. */
- target_terminal_ours ();
- wrap_here (""); /* Force out any buffered output */
- gdb_flush (gdb_stdout);
- annotate_error_begin ();
- if (error_pre_print)
- fprintf_filtered (gdb_stderr, error_pre_print);
- ui_file_put (stream, do_write, gdb_stderr);
- fprintf_filtered (gdb_stderr, "\n");
-
- throw_exception (RETURN_ERROR);
+ va_list args;
+ va_start (args, string);
+ throw_vfatal (string, args);
+ va_end (args);
}
-/* Get the last error message issued by gdb */
-
-char *
-error_last_message (void)
+NORETURN void
+error_stream (struct ui_file *stream)
{
long len;
- return ui_file_xstrdup (gdb_lasterr, &len);
+ char *message = ui_file_xstrdup (stream, &len);
+ make_cleanup (xfree, message);
+ error (("%s"), message);
}
-
-/* This is to be called by main() at the very beginning */
-void
-error_init (void)
+/* Print a message reporting an internal error/warning. Ask the user
+ if they want to continue, dump core, or just exit. Return
+ something to indicate a quit. */
+
+struct internal_problem
{
- gdb_lasterr = mem_fileopen ();
-}
+ const char *name;
+ /* FIXME: cagney/2002-08-15: There should be ``maint set/show''
+ commands available for controlling these variables. */
+ enum auto_boolean should_quit;
+ enum auto_boolean should_dump_core;
+};
-/* Print a message reporting an internal error. Ask the user if they
- want to continue, dump core, or just exit. */
+/* Report a problem, internal to GDB, to the user. Once the problem
+ has been reported, and assuming GDB didn't quit, the caller can
+ either allow execution to resume or throw an error. */
-NORETURN void
-internal_verror (const char *file, int line,
- const char *fmt, va_list ap)
+static void ATTR_FORMAT (printf, 4, 0)
+internal_vproblem (struct internal_problem *problem,
+ const char *file, int line, const char *fmt, va_list ap)
{
- static char msg[] = "Internal GDB error: recursive internal error.\n";
- static int dejavu = 0;
+ static int dejavu;
int quit_p;
int dump_core_p;
+ char *reason;
- /* don't allow infinite error recursion. */
- switch (dejavu)
+ /* Don't allow infinite error/warning recursion. */
+ {
+ static char msg[] = "Recursive internal problem.\n";
+ switch (dejavu)
+ {
+ case 0:
+ dejavu = 1;
+ break;
+ case 1:
+ dejavu = 2;
+ fputs_unfiltered (msg, gdb_stderr);
+ abort (); /* NOTE: GDB has only three calls to abort(). */
+ default:
+ dejavu = 3;
+ write (STDERR_FILENO, msg, sizeof (msg));
+ exit (1);
+ }
+ }
+
+ /* Try to get the message out and at the start of a new line. */
+ target_terminal_ours ();
+ begin_line ();
+
+ /* Create a string containing the full error/warning message. Need
+ to call query with this full string, as otherwize the reason
+ (error/warning) and question become separated. Format using a
+ style similar to a compiler error message. Include extra detail
+ so that the user knows that they are living on the edge. */
+ {
+ char *msg;
+ msg = xstrvprintf (fmt, ap);
+ reason = xstrprintf ("\
+%s:%d: %s: %s\n\
+A problem internal to GDB has been detected,\n\
+further debugging may prove unreliable.", file, line, problem->name, msg);
+ xfree (msg);
+ make_cleanup (xfree, reason);
+ }
+
+ switch (problem->should_quit)
{
- case 0:
- dejavu = 1;
+ case AUTO_BOOLEAN_AUTO:
+ /* Default (yes/batch case) is to quit GDB. When in batch mode
+ this lessens the likelhood of GDB going into an infinate
+ loop. */
+ quit_p = query (_("%s\nQuit this debugging session? "), reason);
+ break;
+ case AUTO_BOOLEAN_TRUE:
+ quit_p = 1;
+ break;
+ case AUTO_BOOLEAN_FALSE:
+ quit_p = 0;
break;
- case 1:
- dejavu = 2;
- fputs_unfiltered (msg, gdb_stderr);
- abort (); /* NOTE: GDB has only three calls to abort(). */
default:
- dejavu = 3;
- write (STDERR_FILENO, msg, sizeof (msg));
- exit (1);
+ internal_error (__FILE__, __LINE__, _("bad switch"));
}
- /* Try to get the message out */
- target_terminal_ours ();
- fprintf_unfiltered (gdb_stderr, "%s:%d: gdb-internal-error: ", file, line);
- vfprintf_unfiltered (gdb_stderr, fmt, ap);
- fputs_unfiltered ("\n", gdb_stderr);
-
- /* Default (yes/batch case) is to quit GDB. When in batch mode this
- lessens the likelhood of GDB going into an infinate loop. */
- quit_p = query ("\
-An internal GDB error was detected. This may make further\n\
-debugging unreliable. Quit this debugging session? ");
-
- /* Default (yes/batch case) is to dump core. This leaves a GDB
- dropping so that it is easier to see that something went wrong to
- GDB. */
- dump_core_p = query ("\
-Create a core file containing the current state of GDB? ");
+ switch (problem->should_dump_core)
+ {
+ case AUTO_BOOLEAN_AUTO:
+ /* Default (yes/batch case) is to dump core. This leaves a GDB
+ `dropping' so that it is easier to see that something went
+ wrong in GDB. */
+ dump_core_p = query (_("%s\nCreate a core file of GDB? "), reason);
+ break;
+ break;
+ case AUTO_BOOLEAN_TRUE:
+ dump_core_p = 1;
+ break;
+ case AUTO_BOOLEAN_FALSE:
+ dump_core_p = 0;
+ break;
+ default:
+ internal_error (__FILE__, __LINE__, _("bad switch"));
+ }
if (quit_p)
{
if (dump_core_p)
- abort (); /* NOTE: GDB has only three calls to abort(). */
+ abort (); /* NOTE: GDB has only three calls to abort(). */
else
exit (1);
}
{
if (dump_core_p)
{
+#ifdef HAVE_WORKING_FORK
if (fork () == 0)
- abort (); /* NOTE: GDB has only three calls to abort(). */
+ abort (); /* NOTE: GDB has only three calls to abort(). */
+#endif
}
}
dejavu = 0;
- throw_exception (RETURN_ERROR);
+}
+
+static struct internal_problem internal_error_problem = {
+ "internal-error", AUTO_BOOLEAN_AUTO, AUTO_BOOLEAN_AUTO
+};
+
+NORETURN void
+internal_verror (const char *file, int line, const char *fmt, va_list ap)
+{
+ internal_vproblem (&internal_error_problem, file, line, fmt, ap);
+ deprecated_throw_reason (RETURN_ERROR);
}
NORETURN void
{
va_list ap;
va_start (ap, string);
-
internal_verror (file, line, string, ap);
va_end (ap);
}
+static struct internal_problem internal_warning_problem = {
+ "internal-warning", AUTO_BOOLEAN_AUTO, AUTO_BOOLEAN_AUTO
+};
+
+void
+internal_vwarning (const char *file, int line, const char *fmt, va_list ap)
+{
+ internal_vproblem (&internal_warning_problem, file, line, fmt, ap);
+}
+
+void
+internal_warning (const char *file, int line, const char *string, ...)
+{
+ va_list ap;
+ va_start (ap, string);
+ internal_vwarning (file, line, string, ap);
+ va_end (ap);
+}
+
/* The strerror() function can return NULL for errno values that are
out of range. Provide a "safe" version that always returns a
printable string. */
safe_strerror (int errnum)
{
char *msg;
- static char buf[32];
- if ((msg = strerror (errnum)) == NULL)
+ msg = strerror (errnum);
+ if (msg == NULL)
{
- sprintf (buf, "(undocumented errno %d)", errnum);
+ static char buf[32];
+ xsnprintf (buf, sizeof buf, "(undocumented errno %d)", errnum);
msg = buf;
}
return (msg);
bfd_set_error (bfd_error_no_error);
errno = 0;
- error ("%s.", combined);
+ error (_("%s."), combined);
}
/* Print the system error message for ERRCODE, and also mention STRING
void
quit (void)
{
- struct serial *gdb_stdout_serial = serial_fdopen (1);
-
- target_terminal_ours ();
-
- /* We want all output to appear now, before we print "Quit". We
- have 3 levels of buffering we have to flush (it's possible that
- some of these should be changed to flush the lower-level ones
- too): */
-
- /* 1. The _filtered buffer. */
- wrap_here ((char *) 0);
-
- /* 2. The stdio buffer. */
- gdb_flush (gdb_stdout);
- gdb_flush (gdb_stderr);
-
- /* 3. The system-level buffer. */
- serial_drain_output (gdb_stdout_serial);
- serial_un_fdopen (gdb_stdout_serial);
-
- annotate_error_begin ();
-
- /* Don't use *_filtered; we don't want to prompt the user to continue. */
- if (quit_pre_print)
- fprintf_unfiltered (gdb_stderr, quit_pre_print);
-
#ifdef __MSDOS__
/* No steenking SIGINT will ever be coming our way when the
program is resumed. Don't lie. */
- fprintf_unfiltered (gdb_stderr, "Quit\n");
+ fatal ("Quit");
#else
if (job_control
- /* If there is no terminal switching for this target, then we can't
- possibly get screwed by the lack of job control. */
+ /* If there is no terminal switching for this target, then we can't
+ possibly get screwed by the lack of job control. */
|| current_target.to_terminal_ours == NULL)
- fprintf_unfiltered (gdb_stderr, "Quit\n");
+ fatal ("Quit");
else
- fprintf_unfiltered (gdb_stderr,
- "Quit (expect signal SIGINT when the program is resumed)\n");
+ fatal ("Quit (expect signal SIGINT when the program is resumed)");
#endif
- throw_exception (RETURN_QUIT);
}
/* Control C comes here */
request_quit (int signo)
{
quit_flag = 1;
- /* Restore the signal handler. Harmless with BSD-style signals, needed
- for System V-style signals. So just always do it, rather than worrying
- about USG defines and stuff like that. */
+ /* Restore the signal handler. Harmless with BSD-style signals,
+ needed for System V-style signals. */
signal (signo, request_quit);
-#ifdef REQUEST_QUIT
- REQUEST_QUIT;
-#else
if (immediate_quit)
quit ();
-#endif
}
\f
-/* Memory management stuff (malloc friends). */
-
-#if !defined (USE_MMALLOC)
-
-/* NOTE: These must use PTR so that their definition matches the
- declaration found in "mmalloc.h". */
-
-static void *
-mmalloc (void *md, size_t size)
-{
- return malloc (size); /* NOTE: GDB's only call to malloc() */
-}
-
-static void *
-mrealloc (void *md, void *ptr, size_t size)
-{
- if (ptr == 0) /* Guard against old realloc's */
- return mmalloc (md, size);
- else
- return realloc (ptr, size); /* NOTE: GDB's only call to ralloc() */
-}
-
-static void *
-mcalloc (void *md, size_t number, size_t size)
-{
- return calloc (number, size); /* NOTE: GDB's only call to calloc() */
-}
-
-static void
-mfree (void *md, void *ptr)
-{
- free (ptr); /* NOTE: GDB's only call to free() */
-}
-
-#endif /* USE_MMALLOC */
-
-#if !defined (USE_MMALLOC) || defined (NO_MMCHECK)
-
-void
-init_malloc (void *md)
-{
-}
-
-#else /* Have mmalloc and want corruption checking */
-
-static void
-malloc_botch (void)
-{
- fprintf_unfiltered (gdb_stderr, "Memory corruption\n");
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
-}
-
-/* Attempt to install hooks in mmalloc/mrealloc/mfree for the heap specified
- by MD, to detect memory corruption. Note that MD may be NULL to specify
- the default heap that grows via sbrk.
-
- Note that for freshly created regions, we must call mmcheckf prior to any
- mallocs in the region. Otherwise, any region which was allocated prior to
- installing the checking hooks, which is later reallocated or freed, will
- fail the checks! The mmcheck function only allows initial hooks to be
- installed before the first mmalloc. However, anytime after we have called
- mmcheck the first time to install the checking hooks, we can call it again
- to update the function pointer to the memory corruption handler.
-
- Returns zero on failure, non-zero on success. */
-
-#ifndef MMCHECK_FORCE
-#define MMCHECK_FORCE 0
-#endif
-
-void
-init_malloc (void *md)
-{
- if (!mmcheckf (md, malloc_botch, MMCHECK_FORCE))
- {
- /* Don't use warning(), which relies on current_target being set
- to something other than dummy_target, until after
- initialize_all_files(). */
-
- fprintf_unfiltered
- (gdb_stderr, "warning: failed to install memory consistency checks; ");
- fprintf_unfiltered
- (gdb_stderr, "configuration should define NO_MMCHECK or MMCHECK_FORCE\n");
- }
-
- mmtrace ();
-}
-
-#endif /* Have mmalloc and want corruption checking */
-
/* Called when a memory allocation fails, with the number of bytes of
memory requested in SIZE. */
if (size > 0)
{
internal_error (__FILE__, __LINE__,
- "virtual memory exhausted: can't allocate %ld bytes.", size);
+ _("virtual memory exhausted: can't allocate %ld bytes."),
+ size);
}
else
{
- internal_error (__FILE__, __LINE__,
- "virtual memory exhausted.");
+ internal_error (__FILE__, __LINE__, _("virtual memory exhausted."));
}
}
-/* The xmmalloc() family of memory management routines.
+/* The xmalloc() (libiberty.h) family of memory management routines.
- These are are like the mmalloc() family except that they implement
+ These are like the ISO-C malloc() family except that they implement
consistent semantics and guard against typical memory management
- problems: if a malloc fails, an internal error is thrown; if
- free(NULL) is called, it is ignored; if *alloc(0) is called, NULL
- is returned.
+ problems. */
- All these routines are implemented using the mmalloc() family. */
+/* NOTE: These are declared using PTR to ensure consistency with
+ "libiberty.h". xfree() is GDB local. */
-void *
-xmmalloc (void *md, size_t size)
+PTR /* OK: PTR */
+xmalloc (size_t size)
{
void *val;
+ /* See libiberty/xmalloc.c. This function need's to match that's
+ semantics. It never returns NULL. */
if (size == 0)
- {
- val = NULL;
- }
- else
- {
- val = mmalloc (md, size);
- if (val == NULL)
- nomem (size);
- }
+ size = 1;
+
+ val = malloc (size); /* OK: malloc */
+ if (val == NULL)
+ nomem (size);
+
return (val);
}
void *
-xmrealloc (void *md, void *ptr, size_t size)
+xzalloc (size_t size)
+{
+ return xcalloc (1, size);
+}
+
+PTR /* OK: PTR */
+xrealloc (PTR ptr, size_t size) /* OK: PTR */
{
void *val;
+ /* See libiberty/xmalloc.c. This function need's to match that's
+ semantics. It never returns NULL. */
if (size == 0)
- {
- if (ptr != NULL)
- mfree (md, ptr);
- val = NULL;
- }
+ size = 1;
+
+ if (ptr != NULL)
+ val = realloc (ptr, size); /* OK: realloc */
else
- {
- if (ptr != NULL)
- {
- val = mrealloc (md, ptr, size);
- }
- else
- {
- val = mmalloc (md, size);
- }
- if (val == NULL)
- {
- nomem (size);
- }
- }
+ val = malloc (size); /* OK: malloc */
+ if (val == NULL)
+ nomem (size);
+
return (val);
}
-void *
-xmcalloc (void *md, size_t number, size_t size)
+PTR /* OK: PTR */
+xcalloc (size_t number, size_t size)
{
void *mem;
+
+ /* See libiberty/xmalloc.c. This function need's to match that's
+ semantics. It never returns NULL. */
if (number == 0 || size == 0)
- mem = NULL;
- else
{
- mem = mcalloc (md, number, size);
- if (mem == NULL)
- nomem (number * size);
+ number = 1;
+ size = 1;
}
- return mem;
-}
-void
-xmfree (void *md, void *ptr)
-{
- if (ptr != NULL)
- mfree (md, ptr);
-}
-
-/* The xmalloc() (libiberty.h) family of memory management routines.
-
- These are like the ISO-C malloc() family except that they implement
- consistent semantics and guard against typical memory management
- problems. See xmmalloc() above for further information.
-
- All these routines are wrappers to the xmmalloc() family. */
-
-/* NOTE: These are declared using PTR to ensure consistency with
- "libiberty.h". xfree() is GDB local. */
-
-PTR
-xmalloc (size_t size)
-{
- return xmmalloc (NULL, size);
-}
-
-PTR
-xrealloc (PTR ptr, size_t size)
-{
- return xmrealloc (NULL, ptr, size);
-}
+ mem = calloc (number, size); /* OK: xcalloc */
+ if (mem == NULL)
+ nomem (number * size);
-PTR
-xcalloc (size_t number, size_t size)
-{
- return xmcalloc (NULL, number, size);
+ return mem;
}
void
xfree (void *ptr)
{
- xmfree (NULL, ptr);
+ if (ptr != NULL)
+ free (ptr); /* OK: free */
}
\f
/* Like asprintf/vasprintf but get an internal_error if the call
fails. */
+char *
+xstrprintf (const char *format, ...)
+{
+ char *ret;
+ va_list args;
+ va_start (args, format);
+ ret = xstrvprintf (format, args);
+ va_end (args);
+ return ret;
+}
+
void
xasprintf (char **ret, const char *format, ...)
{
va_list args;
va_start (args, format);
- xvasprintf (ret, format, args);
+ (*ret) = xstrvprintf (format, args);
va_end (args);
}
void
xvasprintf (char **ret, const char *format, va_list ap)
{
- int status = vasprintf (ret, format, ap);
- /* NULL could be returned due to a memory allocation problem; a
- badly format string; or something else. */
- if ((*ret) == NULL)
- internal_error (__FILE__, __LINE__,
- "vasprintf returned NULL buffer (errno %d)",
- errno);
- /* A negative status with a non-NULL buffer shouldn't never
- happen. But to be sure. */
+ (*ret) = xstrvprintf (format, ap);
+}
+
+char *
+xstrvprintf (const char *format, va_list ap)
+{
+ char *ret = NULL;
+ int status = vasprintf (&ret, format, ap);
+ /* NULL is returned when there was a memory allocation problem. */
+ if (ret == NULL)
+ nomem (0);
+ /* A negative status (the printed length) with a non-NULL buffer
+ should never happen, but just to be sure. */
if (status < 0)
internal_error (__FILE__, __LINE__,
- "vasprintf call failed (errno %d)",
- errno);
+ _("vasprintf call failed (errno %d)"), errno);
+ return ret;
}
+int
+xsnprintf (char *str, size_t size, const char *format, ...)
+{
+ va_list args;
+ int ret;
+
+ va_start (args, format);
+ ret = vsnprintf (str, size, format, args);
+ gdb_assert (ret < size);
+ va_end (args);
+
+ return ret;
+}
/* My replacement for the read system call.
Used like `read' but keeps going if `read' returns too soon. */
int
myread (int desc, char *addr, int len)
{
- register int val;
+ int val;
int orglen = len;
while (len > 0)
char *
savestring (const char *ptr, size_t size)
{
- register char *p = (char *) xmalloc (size + 1);
- memcpy (p, ptr, size);
- p[size] = 0;
- return p;
-}
-
-char *
-msavestring (void *md, const char *ptr, size_t size)
-{
- register char *p = (char *) xmmalloc (md, size + 1);
+ char *p = (char *) xmalloc (size + 1);
memcpy (p, ptr, size);
p[size] = 0;
return p;
}
-char *
-mstrsave (void *md, const char *ptr)
-{
- return (msavestring (md, ptr, strlen (ptr)));
-}
-
void
-print_spaces (register int n, register struct ui_file *file)
+print_spaces (int n, struct ui_file *file)
{
fputs_unfiltered (n_spaces (n), file);
}
/* Print a host address. */
void
-gdb_print_host_address (void *addr, struct ui_file *stream)
+gdb_print_host_address (const void *addr, struct ui_file *stream)
{
/* We could use the %p conversion specifier to fprintf if we had any
/* VARARGS */
int
-query (const char *ctlstr,...)
+query (const char *ctlstr, ...)
{
va_list args;
- register int answer;
- register int ans2;
+ int answer;
+ int ans2;
int retval;
- va_start (args, ctlstr);
-
- if (query_hook)
+ if (deprecated_query_hook)
{
- return query_hook (ctlstr, args);
+ va_start (args, ctlstr);
+ return deprecated_query_hook (ctlstr, args);
}
/* Automatically answer "yes" if input is not from a terminal. */
gdb_flush (gdb_stdout);
if (annotation_level > 1)
- printf_filtered ("\n\032\032pre-query\n");
+ printf_filtered (("\n\032\032pre-query\n"));
+ va_start (args, ctlstr);
vfprintf_filtered (gdb_stdout, ctlstr, args);
- printf_filtered ("(y or n) ");
+ va_end (args);
+ printf_filtered (_("(y or n) "));
if (annotation_level > 1)
- printf_filtered ("\n\032\032query\n");
+ printf_filtered (("\n\032\032query\n"));
wrap_here ("");
gdb_flush (gdb_stdout);
if (answer != '\n')
do
{
- ans2 = fgetc (stdin);
+ ans2 = fgetc (stdin);
clearerr (stdin);
}
while (ans2 != EOF && ans2 != '\n' && ans2 != '\r');
retval = 0;
break;
}
- printf_filtered ("Please answer y or n.\n");
+ printf_filtered (_("Please answer y or n.\n"));
+ }
+
+ if (annotation_level > 1)
+ printf_filtered (("\n\032\032post-query\n"));
+ return retval;
+}
+\f
+
+/* This function supports the nquery() and yquery() functions.
+ Ask user a y-or-n question and return 0 if answer is no, 1 if
+ answer is yes, or default the answer to the specified default.
+ DEFCHAR is either 'y' or 'n' and refers to the default answer.
+ CTLSTR is the control string and should end in "? ". It should
+ not say how to answer, because we do that.
+ ARGS are the arguments passed along with the CTLSTR argument to
+ printf. */
+
+static int ATTR_FORMAT (printf, 1, 0)
+defaulted_query (const char *ctlstr, const char defchar, va_list args)
+{
+ int answer;
+ int ans2;
+ int retval;
+ int def_value;
+ char def_answer, not_def_answer;
+ char *y_string, *n_string;
+
+ /* Set up according to which answer is the default. */
+ if (defchar == 'y')
+ {
+ def_value = 1;
+ def_answer = 'Y';
+ not_def_answer = 'N';
+ y_string = "[y]";
+ n_string = "n";
+ }
+ else
+ {
+ def_value = 0;
+ def_answer = 'N';
+ not_def_answer = 'Y';
+ y_string = "y";
+ n_string = "[n]";
+ }
+
+ if (deprecated_query_hook)
+ {
+ return deprecated_query_hook (ctlstr, args);
+ }
+
+ /* Automatically answer default value if input is not from a terminal. */
+ if (!input_from_terminal_p ())
+ return def_value;
+
+ while (1)
+ {
+ wrap_here (""); /* Flush any buffered output */
+ gdb_flush (gdb_stdout);
+
+ if (annotation_level > 1)
+ printf_filtered (("\n\032\032pre-query\n"));
+
+ vfprintf_filtered (gdb_stdout, ctlstr, args);
+ printf_filtered (_("(%s or %s) "), y_string, n_string);
+
+ if (annotation_level > 1)
+ printf_filtered (("\n\032\032query\n"));
+
+ wrap_here ("");
+ gdb_flush (gdb_stdout);
+
+ answer = fgetc (stdin);
+ clearerr (stdin); /* in case of C-d */
+ if (answer == EOF) /* C-d */
+ {
+ retval = def_value;
+ break;
+ }
+ /* Eat rest of input line, to EOF or newline */
+ if (answer != '\n')
+ do
+ {
+ ans2 = fgetc (stdin);
+ clearerr (stdin);
+ }
+ while (ans2 != EOF && ans2 != '\n' && ans2 != '\r');
+
+ if (answer >= 'a')
+ answer -= 040;
+ /* Check answer. For the non-default, the user must specify
+ the non-default explicitly. */
+ if (answer == not_def_answer)
+ {
+ retval = !def_value;
+ break;
+ }
+ /* Otherwise, for the default, the user may either specify
+ the required input or have it default by entering nothing. */
+ if (answer == def_answer || answer == '\n' ||
+ answer == '\r' || answer == EOF)
+ {
+ retval = def_value;
+ break;
+ }
+ /* Invalid entries are not defaulted and require another selection. */
+ printf_filtered (_("Please answer %s or %s.\n"),
+ y_string, n_string);
}
if (annotation_level > 1)
- printf_filtered ("\n\032\032post-query\n");
+ printf_filtered (("\n\032\032post-query\n"));
return retval;
}
\f
+/* Ask user a y-or-n question and return 0 if answer is no, 1 if
+ answer is yes, or 0 if answer is defaulted.
+ Takes three args which are given to printf to print the question.
+ The first, a control string, should end in "? ".
+ It should not say how to answer, because we do that. */
+
+int
+nquery (const char *ctlstr, ...)
+{
+ va_list args;
+
+ va_start (args, ctlstr);
+ return defaulted_query (ctlstr, 'n', args);
+ va_end (args);
+}
+
+/* Ask user a y-or-n question and return 0 if answer is no, 1 if
+ answer is yes, or 1 if answer is defaulted.
+ Takes three args which are given to printf to print the question.
+ The first, a control string, should end in "? ".
+ It should not say how to answer, because we do that. */
+
+int
+yquery (const char *ctlstr, ...)
+{
+ va_list args;
+
+ va_start (args, ctlstr);
+ return defaulted_query (ctlstr, 'y', args);
+ va_end (args);
+}
+
+/* Print an error message saying that we couldn't make sense of a
+ \^mumble sequence in a string or character constant. START and END
+ indicate a substring of some larger string that contains the
+ erroneous backslash sequence, missing the initial backslash. */
+static NORETURN int
+no_control_char_error (const char *start, const char *end)
+{
+ int len = end - start;
+ char *copy = alloca (end - start + 1);
+
+ memcpy (copy, start, len);
+ copy[len] = '\0';
+
+ error (_("There is no control character `\\%s' in the `%s' character set."),
+ copy, target_charset ());
+}
+
/* Parse a C escape sequence. STRING_PTR points to a variable
containing a pointer to the string to parse. That pointer
should point to the character after the \. That pointer
int
parse_escape (char **string_ptr)
{
- register int c = *(*string_ptr)++;
- switch (c)
- {
- case 'a':
- return 007; /* Bell (alert) char */
- case 'b':
- return '\b';
- case 'e': /* Escape character */
- return 033;
- case 'f':
- return '\f';
- case 'n':
- return '\n';
- case 'r':
- return '\r';
- case 't':
- return '\t';
- case 'v':
- return '\v';
- case '\n':
- return -2;
- case 0:
- (*string_ptr)--;
- return 0;
- case '^':
- c = *(*string_ptr)++;
- if (c == '\\')
- c = parse_escape (string_ptr);
- if (c == '?')
- return 0177;
- return (c & 0200) | (c & 037);
-
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
+ int target_char;
+ int c = *(*string_ptr)++;
+ if (c_parse_backslash (c, &target_char))
+ return target_char;
+ else
+ switch (c)
{
- register int i = c - '0';
- register int count = 0;
- while (++count < 3)
- {
- if ((c = *(*string_ptr)++) >= '0' && c <= '7')
- {
- i *= 8;
- i += c - '0';
- }
- else
- {
- (*string_ptr)--;
- break;
- }
- }
- return i;
+ case '\n':
+ return -2;
+ case 0:
+ (*string_ptr)--;
+ return 0;
+ case '^':
+ {
+ /* Remember where this escape sequence started, for reporting
+ errors. */
+ char *sequence_start_pos = *string_ptr - 1;
+
+ c = *(*string_ptr)++;
+
+ if (c == '?')
+ {
+ /* XXXCHARSET: What is `delete' in the host character set? */
+ c = 0177;
+
+ if (!host_char_to_target (c, &target_char))
+ error (_("There is no character corresponding to `Delete' "
+ "in the target character set `%s'."), host_charset ());
+
+ return target_char;
+ }
+ else if (c == '\\')
+ target_char = parse_escape (string_ptr);
+ else
+ {
+ if (!host_char_to_target (c, &target_char))
+ no_control_char_error (sequence_start_pos, *string_ptr);
+ }
+
+ /* Now target_char is something like `c', and we want to find
+ its control-character equivalent. */
+ if (!target_char_to_control_char (target_char, &target_char))
+ no_control_char_error (sequence_start_pos, *string_ptr);
+
+ return target_char;
+ }
+
+ /* XXXCHARSET: we need to use isdigit and value-of-digit
+ methods of the host character set here. */
+
+ case '0':
+ case '1':
+ case '2':
+ case '3':
+ case '4':
+ case '5':
+ case '6':
+ case '7':
+ {
+ int i = c - '0';
+ int count = 0;
+ while (++count < 3)
+ {
+ c = (**string_ptr);
+ if (c >= '0' && c <= '7')
+ {
+ (*string_ptr)++;
+ i *= 8;
+ i += c - '0';
+ }
+ else
+ {
+ break;
+ }
+ }
+ return i;
+ }
+ default:
+ if (!host_char_to_target (c, &target_char))
+ error
+ ("The escape sequence `\%c' is equivalent to plain `%c', which"
+ " has no equivalent\n" "in the `%s' character set.", c, c,
+ target_charset ());
+ return target_char;
}
- default:
- return c;
- }
}
\f
/* Print the character C on STREAM as part of the contents of a literal
static void
printchar (int c, void (*do_fputs) (const char *, struct ui_file *),
- void (*do_fprintf) (struct ui_file *, const char *, ...),
- struct ui_file *stream, int quoter)
+ void (*do_fprintf) (struct ui_file *, const char *, ...)
+ ATTRIBUTE_FPTR_PRINTF_2, struct ui_file *stream, int quoter)
{
c &= 0xFF; /* Avoid sign bit follies */
}
void
-fputstrn_unfiltered (const char *str, int n, int quoter, struct ui_file *stream)
+fputstrn_unfiltered (const char *str, int n, int quoter,
+ struct ui_file *stream)
{
int i;
for (i = 0; i < n; i++)
printchar (str[i], fputs_unfiltered, fprintf_unfiltered, stream, quoter);
}
-
\f
/* Number of lines per page or UINT_MAX if paging is disabled. */
static unsigned int lines_per_page;
+static void
+show_lines_per_page (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Number of lines gdb thinks are in a page is %s.\n"),
+ value);
+}
+
/* Number of chars per line or UINT_MAX if line folding is disabled. */
static unsigned int chars_per_line;
+static void
+show_chars_per_line (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Number of characters gdb thinks are in a line is %s.\n"),
+ value);
+}
+
/* Current count of lines printed on this page, chars on this line. */
static unsigned int lines_printed, chars_printed;
static int wrap_column;
\f
-/* Inialize the lines and chars per page */
+/* Inialize the number of lines per page and chars per line. */
+
void
init_page_info (void)
{
if (!tui_get_command_dimension (&chars_per_line, &lines_per_page))
#endif
{
- /* These defaults will be used if we are unable to get the correct
- values from termcap. */
+ int rows, cols;
+
#if defined(__GO32__)
- lines_per_page = ScreenRows ();
- chars_per_line = ScreenCols ();
+ rows = ScreenRows ();
+ cols = ScreenCols ();
+ lines_per_page = rows;
+ chars_per_line = cols;
#else
- lines_per_page = 24;
- chars_per_line = 80;
-
-#if !defined (_WIN32)
- /* No termcap under MPW, although might be cool to do something
- by looking at worksheet or console window sizes. */
- /* Initialize the screen height and width from termcap. */
- {
- char *termtype = getenv ("TERM");
-
- /* Positive means success, nonpositive means failure. */
- int status;
+ /* Make sure Readline has initialized its terminal settings. */
+ rl_reset_terminal (NULL);
- /* 2048 is large enough for all known terminals, according to the
- GNU termcap manual. */
- char term_buffer[2048];
+ /* Get the screen size from Readline. */
+ rl_get_screen_size (&rows, &cols);
+ lines_per_page = rows;
+ chars_per_line = cols;
- if (termtype)
- {
- status = tgetent (term_buffer, termtype);
- if (status > 0)
- {
- int val;
- int running_in_emacs = getenv ("EMACS") != NULL;
-
- val = tgetnum ("li");
- if (val >= 0 && !running_in_emacs)
- lines_per_page = val;
- else
- /* The number of lines per page is not mentioned
- in the terminal description. This probably means
- that paging is not useful (e.g. emacs shell window),
- so disable paging. */
- lines_per_page = UINT_MAX;
-
- val = tgetnum ("co");
- if (val >= 0)
- chars_per_line = val;
- }
- }
- }
-#endif /* MPW */
+ /* Readline should have fetched the termcap entry for us. */
+ if (tgetnum ("li") < 0 || getenv ("EMACS"))
+ {
+ /* The number of lines per page is not mentioned in the
+ terminal description. This probably means that paging is
+ not useful (e.g. emacs shell window), so disable paging. */
+ lines_per_page = UINT_MAX;
+ }
+ /* FIXME: Get rid of this junk. */
#if defined(SIGWINCH) && defined(SIGWINCH_HANDLER)
-
- /* If there is a better way to determine the window size, use it. */
SIGWINCH_HANDLER (SIGWINCH);
#endif
-#endif
+
/* If the output is not a terminal, don't paginate it. */
if (!ui_file_isatty (gdb_stdout))
lines_per_page = UINT_MAX;
- } /* the command_line_version */
+#endif
+ }
+
+ set_screen_size ();
set_width ();
}
+/* Set the screen size based on LINES_PER_PAGE and CHARS_PER_LINE. */
+
+static void
+set_screen_size (void)
+{
+ int rows = lines_per_page;
+ int cols = chars_per_line;
+
+ if (rows <= 0)
+ rows = INT_MAX;
+
+ if (cols <= 0)
+ rl_get_screen_size (NULL, &cols);
+
+ /* Update Readline's idea of the terminal size. */
+ rl_set_screen_size (rows, cols);
+}
+
+/* Reinitialize WRAP_BUFFER according to the current value of
+ CHARS_PER_LINE. */
+
static void
set_width (void)
{
}
else
wrap_buffer = (char *) xrealloc (wrap_buffer, chars_per_line + 2);
- wrap_pointer = wrap_buffer; /* Start it at the beginning */
+ wrap_pointer = wrap_buffer; /* Start it at the beginning. */
}
-/* ARGSUSED */
static void
set_width_command (char *args, int from_tty, struct cmd_list_element *c)
{
+ set_screen_size ();
set_width ();
}
+static void
+set_height_command (char *args, int from_tty, struct cmd_list_element *c)
+{
+ set_screen_size ();
+}
+
/* Wait, so the user can read what's on the screen. Prompt the user
to continue by pressing RETURN. */
char cont_prompt[120];
if (annotation_level > 1)
- printf_unfiltered ("\n\032\032pre-prompt-for-continue\n");
+ printf_unfiltered (("\n\032\032pre-prompt-for-continue\n"));
strcpy (cont_prompt,
"---Type <return> to continue, or q <return> to quit---");
/* Call readline, not gdb_readline, because GO32 readline handles control-C
whereas control-C to gdb_readline will cause the user to get dumped
out to DOS. */
- ignore = readline (cont_prompt);
+ ignore = gdb_readline_wrapper (cont_prompt);
if (annotation_level > 1)
- printf_unfiltered ("\n\032\032post-prompt-for-continue\n");
+ printf_unfiltered (("\n\032\032post-prompt-for-continue\n"));
if (ignore)
{
while (*p == ' ' || *p == '\t')
++p;
if (p[0] == 'q')
- {
- if (!event_loop_p)
- request_quit (SIGINT);
- else
- async_request_quit (0);
- }
+ async_request_quit (0);
xfree (ignore);
}
immediate_quit--;
{
/* This should have been allocated, but be paranoid anyway. */
if (!wrap_buffer)
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
+ internal_error (__FILE__, __LINE__, _("failed internal consistency check"));
if (wrap_buffer[0])
{
}
}
+/* Print input string to gdb_stdout, filtered, with wrap,
+ arranging strings in columns of n chars. String can be
+ right or left justified in the column. Never prints
+ trailing spaces. String should never be longer than
+ width. FIXME: this could be useful for the EXAMINE
+ command, which currently doesn't tabulate very well */
+
+void
+puts_filtered_tabular (char *string, int width, int right)
+{
+ int spaces = 0;
+ int stringlen;
+ char *spacebuf;
+
+ gdb_assert (chars_per_line > 0);
+ if (chars_per_line == UINT_MAX)
+ {
+ fputs_filtered (string, gdb_stdout);
+ fputs_filtered ("\n", gdb_stdout);
+ return;
+ }
+
+ if (((chars_printed - 1) / width + 2) * width >= chars_per_line)
+ fputs_filtered ("\n", gdb_stdout);
+
+ if (width >= chars_per_line)
+ width = chars_per_line - 1;
+
+ stringlen = strlen (string);
+
+ if (chars_printed > 0)
+ spaces = width - (chars_printed - 1) % width - 1;
+ if (right)
+ spaces += width - stringlen;
+
+ spacebuf = alloca (spaces + 1);
+ spacebuf[spaces] = '\0';
+ while (spaces--)
+ spacebuf[spaces] = ' ';
+
+ fputs_filtered (spacebuf, gdb_stdout);
+ fputs_filtered (string, gdb_stdout);
+}
+
+
/* Ensure that whatever gets printed next, using the filtered output
commands, starts at the beginning of the line. I.E. if there is
any pending output for the current line, flush it and start a new
while (*lineptr)
{
/* Possible new page. */
- if (filter &&
- (lines_printed >= lines_per_page - 1))
+ if (filter && (lines_printed >= lines_per_page - 1))
prompt_for_continue ();
while (*lineptr && *lineptr != '\n')
if (wrap_column)
{
fputs_unfiltered (wrap_indent, stream);
- *wrap_pointer = '\0'; /* Null-terminate saved stuff */
+ *wrap_pointer = '\0'; /* Null-terminate saved stuff */
fputs_unfiltered (wrap_buffer, stream); /* and eject it */
/* FIXME, this strlen is what prevents wrap_indent from
containing tabs. However, if we recurse to print it
char *linebuffer;
struct cleanup *old_cleanups;
- xvasprintf (&linebuffer, format, args);
+ linebuffer = xstrvprintf (format, args);
old_cleanups = make_cleanup (xfree, linebuffer);
fputs_maybe_filtered (linebuffer, stream, filter);
do_cleanups (old_cleanups);
char *linebuffer;
struct cleanup *old_cleanups;
- xvasprintf (&linebuffer, format, args);
+ linebuffer = xstrvprintf (format, args);
old_cleanups = make_cleanup (xfree, linebuffer);
fputs_unfiltered (linebuffer, stream);
do_cleanups (old_cleanups);
}
void
-fprintf_filtered (struct ui_file * stream, const char *format,...)
+fprintf_filtered (struct ui_file *stream, const char *format, ...)
{
va_list args;
va_start (args, format);
}
void
-fprintf_unfiltered (struct ui_file * stream, const char *format,...)
+fprintf_unfiltered (struct ui_file *stream, const char *format, ...)
{
va_list args;
va_start (args, format);
Called as fprintfi_filtered (spaces, stream, format, ...); */
void
-fprintfi_filtered (int spaces, struct ui_file * stream, const char *format,...)
+fprintfi_filtered (int spaces, struct ui_file *stream, const char *format,
+ ...)
{
va_list args;
va_start (args, format);
void
-printf_filtered (const char *format,...)
+printf_filtered (const char *format, ...)
{
va_list args;
va_start (args, format);
void
-printf_unfiltered (const char *format,...)
+printf_unfiltered (const char *format, ...)
{
va_list args;
va_start (args, format);
Called as printfi_filtered (spaces, format, ...); */
void
-printfi_filtered (int spaces, const char *format,...)
+printfi_filtered (int spaces, const char *format, ...)
{
va_list args;
va_start (args, format);
fputs_filtered (n_spaces (n), stream);
}
\f
-/* C++ demangler stuff. */
+/* C++/ObjC demangler stuff. */
/* fprintf_symbol_filtered attempts to demangle NAME, a symbol in language
LANG, using demangling args ARG_MODE, and print it filtered to STREAM.
demangling is off, the name is printed in its "raw" form. */
void
-fprintf_symbol_filtered (struct ui_file *stream, char *name, enum language lang,
- int arg_mode)
+fprintf_symbol_filtered (struct ui_file *stream, char *name,
+ enum language lang, int arg_mode)
{
char *demangled;
}
else
{
- switch (lang)
- {
- case language_cplus:
- demangled = cplus_demangle (name, arg_mode);
- break;
- case language_java:
- demangled = cplus_demangle (name, arg_mode | DMGL_JAVA);
- break;
- case language_chill:
- demangled = chill_demangle (name);
- break;
- default:
- demangled = NULL;
- break;
- }
+ demangled = language_demangle (language_def (lang), name, arg_mode);
fputs_filtered (demangled ? demangled : name, stream);
if (demangled != NULL)
{
}
return (*string1 != '\0' && *string1 != '(') || (*string2 != '\0');
}
+
+/* This is like strcmp except that it ignores whitespace and treats
+ '(' as the first non-NULL character in terms of ordering. Like
+ strcmp (and unlike strcmp_iw), it returns negative if STRING1 <
+ STRING2, 0 if STRING2 = STRING2, and positive if STRING1 > STRING2
+ according to that ordering.
+
+ If a list is sorted according to this function and if you want to
+ find names in the list that match some fixed NAME according to
+ strcmp_iw(LIST_ELT, NAME), then the place to start looking is right
+ where this function would put NAME.
+
+ Here are some examples of why using strcmp to sort is a bad idea:
+
+ Whitespace example:
+
+ Say your partial symtab contains: "foo<char *>", "goo". Then, if
+ we try to do a search for "foo<char*>", strcmp will locate this
+ after "foo<char *>" and before "goo". Then lookup_partial_symbol
+ will start looking at strings beginning with "goo", and will never
+ see the correct match of "foo<char *>".
+
+ Parenthesis example:
+
+ In practice, this is less like to be an issue, but I'll give it a
+ shot. Let's assume that '$' is a legitimate character to occur in
+ symbols. (Which may well even be the case on some systems.) Then
+ say that the partial symbol table contains "foo$" and "foo(int)".
+ strcmp will put them in this order, since '$' < '('. Now, if the
+ user searches for "foo", then strcmp will sort "foo" before "foo$".
+ Then lookup_partial_symbol will notice that strcmp_iw("foo$",
+ "foo") is false, so it won't proceed to the actual match of
+ "foo(int)" with "foo". */
+
+int
+strcmp_iw_ordered (const char *string1, const char *string2)
+{
+ while ((*string1 != '\0') && (*string2 != '\0'))
+ {
+ while (isspace (*string1))
+ {
+ string1++;
+ }
+ while (isspace (*string2))
+ {
+ string2++;
+ }
+ if (*string1 != *string2)
+ {
+ break;
+ }
+ if (*string1 != '\0')
+ {
+ string1++;
+ string2++;
+ }
+ }
+
+ switch (*string1)
+ {
+ /* Characters are non-equal unless they're both '\0'; we want to
+ make sure we get the comparison right according to our
+ comparison in the cases where one of them is '\0' or '('. */
+ case '\0':
+ if (*string2 == '\0')
+ return 0;
+ else
+ return -1;
+ case '(':
+ if (*string2 == '\0')
+ return 1;
+ else
+ return -1;
+ default:
+ if (*string2 == '(')
+ return 1;
+ else
+ return *string1 - *string2;
+ }
+}
+
+/* A simple comparison function with opposite semantics to strcmp. */
+
+int
+streq (const char *lhs, const char *rhs)
+{
+ return !strcmp (lhs, rhs);
+}
\f
/*
subset_compare (char *string_to_compare, char *template_string)
{
int match;
- if (template_string != (char *) NULL && string_to_compare != (char *) NULL &&
- strlen (string_to_compare) <= strlen (template_string))
- match = (strncmp (template_string,
- string_to_compare,
- strlen (string_to_compare)) == 0);
+ if (template_string != (char *) NULL && string_to_compare != (char *) NULL
+ && strlen (string_to_compare) <= strlen (template_string))
+ match =
+ (strncmp
+ (template_string, string_to_compare, strlen (string_to_compare)) == 0);
else
match = 0;
return match;
{
struct cmd_list_element *c;
- c = add_set_cmd ("width", class_support, var_uinteger,
- (char *) &chars_per_line,
- "Set number of characters gdb thinks are in a line.",
- &setlist);
- add_show_from_set (c, &showlist);
- set_cmd_sfunc (c, set_width_command);
+ add_setshow_uinteger_cmd ("width", class_support, &chars_per_line, _("\
+Set number of characters gdb thinks are in a line."), _("\
+Show number of characters gdb thinks are in a line."), NULL,
+ set_width_command,
+ show_chars_per_line,
+ &setlist, &showlist);
- add_show_from_set
- (add_set_cmd ("height", class_support,
- var_uinteger, (char *) &lines_per_page,
- "Set number of lines gdb thinks are in a page.", &setlist),
- &showlist);
+ add_setshow_uinteger_cmd ("height", class_support, &lines_per_page, _("\
+Set number of lines gdb thinks are in a page."), _("\
+Show number of lines gdb thinks are in a page."), NULL,
+ set_height_command,
+ show_lines_per_page,
+ &setlist, &showlist);
init_page_info ();
- /* If the output is not a terminal, don't paginate it. */
- if (!ui_file_isatty (gdb_stdout))
- lines_per_page = UINT_MAX;
-
- set_width_command ((char *) NULL, 0, c);
-
- add_show_from_set
- (add_set_cmd ("demangle", class_support, var_boolean,
- (char *) &demangle,
- "Set demangling of encoded C++ names when displaying symbols.",
- &setprintlist),
- &showprintlist);
-
- add_show_from_set
- (add_set_cmd ("pagination", class_support,
- var_boolean, (char *) &pagination_enabled,
- "Set state of pagination.", &setlist),
- &showlist);
+ add_setshow_boolean_cmd ("demangle", class_support, &demangle, _("\
+Set demangling of encoded C++/ObjC names when displaying symbols."), _("\
+Show demangling of encoded C++/ObjC names when displaying symbols."), NULL,
+ NULL,
+ show_demangle,
+ &setprintlist, &showprintlist);
+
+ add_setshow_boolean_cmd ("pagination", class_support,
+ &pagination_enabled, _("\
+Set state of pagination."), _("\
+Show state of pagination."), NULL,
+ NULL,
+ show_pagination_enabled,
+ &setlist, &showlist);
if (xdb_commands)
{
add_com ("am", class_support, pagination_on_command,
- "Enable pagination");
+ _("Enable pagination"));
add_com ("sm", class_support, pagination_off_command,
- "Disable pagination");
+ _("Disable pagination"));
}
- add_show_from_set
- (add_set_cmd ("sevenbit-strings", class_support, var_boolean,
- (char *) &sevenbit_strings,
- "Set printing of 8-bit characters in strings as \\nnn.",
- &setprintlist),
- &showprintlist);
+ add_setshow_boolean_cmd ("sevenbit-strings", class_support,
+ &sevenbit_strings, _("\
+Set printing of 8-bit characters in strings as \\nnn."), _("\
+Show printing of 8-bit characters in strings as \\nnn."), NULL,
+ NULL,
+ show_sevenbit_strings,
+ &setprintlist, &showprintlist);
- add_show_from_set
- (add_set_cmd ("asm-demangle", class_support, var_boolean,
- (char *) &asm_demangle,
- "Set demangling of C++ names in disassembly listings.",
- &setprintlist),
- &showprintlist);
+ add_setshow_boolean_cmd ("asm-demangle", class_support, &asm_demangle, _("\
+Set demangling of C++/ObjC names in disassembly listings."), _("\
+Show demangling of C++/ObjC names in disassembly listings."), NULL,
+ NULL,
+ show_asm_demangle,
+ &setprintlist, &showprintlist);
}
/* Machine specific function to handle SIGWINCH signal. */
#ifdef SIGWINCH_HANDLER_BODY
SIGWINCH_HANDLER_BODY
#endif
-
/* print routines to handle variable size regs, etc. */
-
/* temporary storage using circular buffer */
#define NUMCELLS 16
-#define CELLSIZE 32
+#define CELLSIZE 50
static char *
get_cell (void)
{
return phex_nz (addr, TARGET_ADDR_BIT / 8);
}
-static void
-decimal2str (char *paddr_str, char *sign, ULONGEST addr)
+const char *
+paddress (CORE_ADDR addr)
+{
+ /* Truncate address to the size of a target address, avoiding shifts
+ larger or equal than the width of a CORE_ADDR. The local
+ variable ADDR_BIT stops the compiler reporting a shift overflow
+ when it won't occur. */
+ /* NOTE: This assumes that the significant address information is
+ kept in the least significant bits of ADDR - the upper bits were
+ either zero or sign extended. Should ADDRESS_TO_POINTER() or
+ some ADDRESS_TO_PRINTABLE() be used to do the conversion? */
+
+ int addr_bit = TARGET_ADDR_BIT;
+
+ if (addr_bit < (sizeof (CORE_ADDR) * HOST_CHAR_BIT))
+ addr &= ((CORE_ADDR) 1 << addr_bit) - 1;
+ return hex_string (addr);
+}
+
+static char *
+decimal2str (char *sign, ULONGEST addr, int width)
{
- /* steal code from valprint.c:print_decimal(). Should this worry
+ /* Steal code from valprint.c:print_decimal(). Should this worry
about the real size of addr as the above does? */
unsigned long temp[3];
+ char *str = get_cell ();
+
int i = 0;
do
{
temp[i] = addr % (1000 * 1000 * 1000);
addr /= (1000 * 1000 * 1000);
i++;
+ width -= 9;
+ }
+ while (addr != 0 && i < (sizeof (temp) / sizeof (temp[0])));
+
+ width += 9;
+ if (width < 0)
+ width = 0;
+
+ switch (i)
+ {
+ case 1:
+ xsnprintf (str, CELLSIZE, "%s%0*lu", sign, width, temp[0]);
+ break;
+ case 2:
+ xsnprintf (str, CELLSIZE, "%s%0*lu%09lu", sign, width,
+ temp[1], temp[0]);
+ break;
+ case 3:
+ xsnprintf (str, CELLSIZE, "%s%0*lu%09lu%09lu", sign, width,
+ temp[2], temp[1], temp[0]);
+ break;
+ default:
+ internal_error (__FILE__, __LINE__,
+ _("failed internal consistency check"));
+ }
+
+ return str;
+}
+
+static char *
+octal2str (ULONGEST addr, int width)
+{
+ unsigned long temp[3];
+ char *str = get_cell ();
+
+ int i = 0;
+ do
+ {
+ temp[i] = addr % (0100000 * 0100000);
+ addr /= (0100000 * 0100000);
+ i++;
+ width -= 10;
}
while (addr != 0 && i < (sizeof (temp) / sizeof (temp[0])));
+
+ width += 10;
+ if (width < 0)
+ width = 0;
+
switch (i)
{
case 1:
- sprintf (paddr_str, "%s%lu",
- sign, temp[0]);
+ if (temp[0] == 0)
+ xsnprintf (str, CELLSIZE, "%*o", width, 0);
+ else
+ xsnprintf (str, CELLSIZE, "0%0*lo", width, temp[0]);
break;
case 2:
- sprintf (paddr_str, "%s%lu%09lu",
- sign, temp[1], temp[0]);
+ xsnprintf (str, CELLSIZE, "0%0*lo%010lo", width, temp[1], temp[0]);
break;
case 3:
- sprintf (paddr_str, "%s%lu%09lu%09lu",
- sign, temp[2], temp[1], temp[0]);
+ xsnprintf (str, CELLSIZE, "0%0*lo%010lo%010lo", width,
+ temp[2], temp[1], temp[0]);
break;
default:
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
+ internal_error (__FILE__, __LINE__,
+ _("failed internal consistency check"));
}
+
+ return str;
}
char *
paddr_u (CORE_ADDR addr)
{
- char *paddr_str = get_cell ();
- decimal2str (paddr_str, "", addr);
- return paddr_str;
+ return decimal2str ("", addr, 0);
}
char *
paddr_d (LONGEST addr)
{
- char *paddr_str = get_cell ();
if (addr < 0)
- decimal2str (paddr_str, "-", -addr);
+ return decimal2str ("-", -addr, 0);
else
- decimal2str (paddr_str, "", addr);
- return paddr_str;
+ return decimal2str ("", addr, 0);
}
-/* eliminate warning from compiler on 32-bit systems */
+/* Eliminate warning from compiler on 32-bit systems. */
static int thirty_two = 32;
char *
phex (ULONGEST l, int sizeof_l)
{
char *str;
+
switch (sizeof_l)
{
case 8:
str = get_cell ();
- sprintf (str, "%08lx%08lx",
- (unsigned long) (l >> thirty_two),
- (unsigned long) (l & 0xffffffff));
+ xsnprintf (str, CELLSIZE, "%08lx%08lx",
+ (unsigned long) (l >> thirty_two),
+ (unsigned long) (l & 0xffffffff));
break;
case 4:
str = get_cell ();
- sprintf (str, "%08lx", (unsigned long) l);
+ xsnprintf (str, CELLSIZE, "%08lx", (unsigned long) l);
break;
case 2:
str = get_cell ();
- sprintf (str, "%04x", (unsigned short) (l & 0xffff));
+ xsnprintf (str, CELLSIZE, "%04x", (unsigned short) (l & 0xffff));
break;
default:
str = phex (l, sizeof (l));
break;
}
+
return str;
}
phex_nz (ULONGEST l, int sizeof_l)
{
char *str;
+
switch (sizeof_l)
{
case 8:
unsigned long high = (unsigned long) (l >> thirty_two);
str = get_cell ();
if (high == 0)
- sprintf (str, "%lx", (unsigned long) (l & 0xffffffff));
+ xsnprintf (str, CELLSIZE, "%lx",
+ (unsigned long) (l & 0xffffffff));
else
- sprintf (str, "%lx%08lx",
- high, (unsigned long) (l & 0xffffffff));
+ xsnprintf (str, CELLSIZE, "%lx%08lx", high,
+ (unsigned long) (l & 0xffffffff));
break;
}
case 4:
str = get_cell ();
- sprintf (str, "%lx", (unsigned long) l);
+ xsnprintf (str, CELLSIZE, "%lx", (unsigned long) l);
break;
case 2:
str = get_cell ();
- sprintf (str, "%x", (unsigned short) (l & 0xffff));
+ xsnprintf (str, CELLSIZE, "%x", (unsigned short) (l & 0xffff));
break;
default:
str = phex_nz (l, sizeof (l));
break;
}
+
return str;
}
-
-/* Convert to / from the hosts pointer to GDB's internal CORE_ADDR
- using the target's conversion routines. */
-CORE_ADDR
-host_pointer_to_address (void *ptr)
+/* Converts a LONGEST to a C-format hexadecimal literal and stores it
+ in a static string. Returns a pointer to this string. */
+char *
+hex_string (LONGEST num)
{
- if (sizeof (ptr) != TYPE_LENGTH (builtin_type_void_data_ptr))
- internal_error (__FILE__, __LINE__,
- "core_addr_to_void_ptr: bad cast");
- return POINTER_TO_ADDRESS (builtin_type_void_data_ptr, &ptr);
+ char *result = get_cell ();
+ xsnprintf (result, CELLSIZE, "0x%s", phex_nz (num, sizeof (num)));
+ return result;
}
-void *
-address_to_host_pointer (CORE_ADDR addr)
+/* Converts a LONGEST number to a C-format hexadecimal literal and
+ stores it in a static string. Returns a pointer to this string
+ that is valid until the next call. The number is padded on the
+ left with 0s to at least WIDTH characters. */
+char *
+hex_string_custom (LONGEST num, int width)
{
- void *ptr;
- if (sizeof (ptr) != TYPE_LENGTH (builtin_type_void_data_ptr))
+ char *result = get_cell ();
+ char *result_end = result + CELLSIZE - 1;
+ const char *hex = phex_nz (num, sizeof (num));
+ int hex_len = strlen (hex);
+
+ if (hex_len > width)
+ width = hex_len;
+ if (width + 2 >= CELLSIZE)
internal_error (__FILE__, __LINE__,
- "core_addr_to_void_ptr: bad cast");
- ADDRESS_TO_POINTER (builtin_type_void_data_ptr, &ptr, addr);
- return ptr;
+ _("hex_string_custom: insufficient space to store result"));
+
+ strcpy (result_end - width - 2, "0x");
+ memset (result_end - width, '0', width);
+ strcpy (result_end - hex_len, hex);
+ return result_end - width - 2;
}
+/* Convert VAL to a numeral in the given radix. For
+ * radix 10, IS_SIGNED may be true, indicating a signed quantity;
+ * otherwise VAL is interpreted as unsigned. If WIDTH is supplied,
+ * it is the minimum width (0-padded if needed). USE_C_FORMAT means
+ * to use C format in all cases. If it is false, then 'x'
+ * and 'o' formats do not include a prefix (0x or leading 0). */
+
+char *
+int_string (LONGEST val, int radix, int is_signed, int width,
+ int use_c_format)
+{
+ switch (radix)
+ {
+ case 16:
+ {
+ char *result;
+ if (width == 0)
+ result = hex_string (val);
+ else
+ result = hex_string_custom (val, width);
+ if (! use_c_format)
+ result += 2;
+ return result;
+ }
+ case 10:
+ {
+ if (is_signed && val < 0)
+ return decimal2str ("-", -val, width);
+ else
+ return decimal2str ("", val, width);
+ }
+ case 8:
+ {
+ char *result = octal2str (val, width);
+ if (use_c_format || val == 0)
+ return result;
+ else
+ return result + 1;
+ }
+ default:
+ internal_error (__FILE__, __LINE__,
+ _("failed internal consistency check"));
+ }
+}
+
/* Convert a CORE_ADDR into a string. */
const char *
core_addr_to_string (const CORE_ADDR addr)
{
if (isdigit (my_string[i]))
addr = (my_string[i] - '0') + (addr * 16);
- else if (isxdigit (my_string[i]))
+ else if (isxdigit (my_string[i]))
addr = (tolower (my_string[i]) - 'a' + 0xa) + (addr * 16);
else
- internal_error (__FILE__, __LINE__, "invalid hex");
+ internal_error (__FILE__, __LINE__, _("invalid hex"));
}
}
else
if (isdigit (my_string[i]))
addr = (my_string[i] - '0') + (addr * 10);
else
- internal_error (__FILE__, __LINE__, "invalid decimal");
+ internal_error (__FILE__, __LINE__, _("invalid decimal"));
}
}
return addr;
char *
gdb_realpath (const char *filename)
{
-#ifdef HAVE_CANONICALIZE_FILE_NAME
- return canonicalize_file_name (filename);
-#elif defined (HAVE_REALPATH)
-#if defined (PATH_MAX)
- char buf[PATH_MAX];
-#elif defined (MAXPATHLEN)
- char buf[MAXPATHLEN];
-#else
-#error "Neither PATH_MAX nor MAXPATHLEN defined"
+ /* Method 1: The system has a compile time upper bound on a filename
+ path. Use that and realpath() to canonicalize the name. This is
+ the most common case. Note that, if there isn't a compile time
+ upper bound, you want to avoid realpath() at all costs. */
+#if defined(HAVE_REALPATH)
+ {
+# if defined (PATH_MAX)
+ char buf[PATH_MAX];
+# define USE_REALPATH
+# elif defined (MAXPATHLEN)
+ char buf[MAXPATHLEN];
+# define USE_REALPATH
+# endif
+# if defined (USE_REALPATH)
+ const char *rp = realpath (filename, buf);
+ if (rp == NULL)
+ rp = filename;
+ return xstrdup (rp);
+# endif
+ }
+#endif /* HAVE_REALPATH */
+
+ /* Method 2: The host system (i.e., GNU) has the function
+ canonicalize_file_name() which malloc's a chunk of memory and
+ returns that, use that. */
+#if defined(HAVE_CANONICALIZE_FILE_NAME)
+ {
+ char *rp = canonicalize_file_name (filename);
+ if (rp == NULL)
+ return xstrdup (filename);
+ else
+ return rp;
+ }
#endif
- char *rp = realpath (filename, buf);
- return xstrdup (rp ? rp : filename);
-#else
+
+ /* FIXME: cagney/2002-11-13:
+
+ Method 2a: Use realpath() with a NULL buffer. Some systems, due
+ to the problems described in in method 3, have modified their
+ realpath() implementation so that it will allocate a buffer when
+ NULL is passed in. Before this can be used, though, some sort of
+ configure time test would need to be added. Otherwize the code
+ will likely core dump. */
+
+ /* Method 3: Now we're getting desperate! The system doesn't have a
+ compile time buffer size and no alternative function. Query the
+ OS, using pathconf(), for the buffer limit. Care is needed
+ though, some systems do not limit PATH_MAX (return -1 for
+ pathconf()) making it impossible to pass a correctly sized buffer
+ to realpath() (it could always overflow). On those systems, we
+ skip this. */
+#if defined (HAVE_REALPATH) && defined (HAVE_UNISTD_H) && defined(HAVE_ALLOCA)
+ {
+ /* Find out the max path size. */
+ long path_max = pathconf ("/", _PC_PATH_MAX);
+ if (path_max > 0)
+ {
+ /* PATH_MAX is bounded. */
+ char *buf = alloca (path_max);
+ char *rp = realpath (filename, buf);
+ return xstrdup (rp ? rp : filename);
+ }
+ }
+#endif
+
+ /* This system is a lost cause, just dup the buffer. */
return xstrdup (filename);
+}
+
+/* Return a copy of FILENAME, with its directory prefix canonicalized
+ by gdb_realpath. */
+
+char *
+xfullpath (const char *filename)
+{
+ const char *base_name = lbasename (filename);
+ char *dir_name;
+ char *real_path;
+ char *result;
+
+ /* Extract the basename of filename, and return immediately
+ a copy of filename if it does not contain any directory prefix. */
+ if (base_name == filename)
+ return xstrdup (filename);
+
+ dir_name = alloca ((size_t) (base_name - filename + 2));
+ /* Allocate enough space to store the dir_name + plus one extra
+ character sometimes needed under Windows (see below), and
+ then the closing \000 character */
+ strncpy (dir_name, filename, base_name - filename);
+ dir_name[base_name - filename] = '\000';
+
+#ifdef HAVE_DOS_BASED_FILE_SYSTEM
+ /* We need to be careful when filename is of the form 'd:foo', which
+ is equivalent of d:./foo, which is totally different from d:/foo. */
+ if (strlen (dir_name) == 2 && isalpha (dir_name[0]) && dir_name[1] == ':')
+ {
+ dir_name[2] = '.';
+ dir_name[3] = '\000';
+ }
#endif
+
+ /* Canonicalize the directory prefix, and build the resulting
+ filename. If the dirname realpath already contains an ending
+ directory separator, avoid doubling it. */
+ real_path = gdb_realpath (dir_name);
+ if (IS_DIR_SEPARATOR (real_path[strlen (real_path) - 1]))
+ result = concat (real_path, base_name, (char *)NULL);
+ else
+ result = concat (real_path, SLASH_STRING, base_name, (char *)NULL);
+
+ xfree (real_path);
+ return result;
+}
+
+
+/* This is the 32-bit CRC function used by the GNU separate debug
+ facility. An executable may contain a section named
+ .gnu_debuglink, which holds the name of a separate executable file
+ containing its debug info, and a checksum of that file's contents,
+ computed using this function. */
+unsigned long
+gnu_debuglink_crc32 (unsigned long crc, unsigned char *buf, size_t len)
+{
+ static const unsigned long crc32_table[256] = {
+ 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419,
+ 0x706af48f, 0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4,
+ 0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07,
+ 0x90bf1d91, 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de,
+ 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, 0x136c9856,
+ 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9,
+ 0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4,
+ 0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
+ 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3,
+ 0x45df5c75, 0xdcd60dcf, 0xabd13d59, 0x26d930ac, 0x51de003a,
+ 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599,
+ 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
+ 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190,
+ 0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f,
+ 0x9fbfe4a5, 0xe8b8d433, 0x7807c9a2, 0x0f00f934, 0x9609a88e,
+ 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
+ 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed,
+ 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950,
+ 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3,
+ 0xfbd44c65, 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2,
+ 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a,
+ 0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5,
+ 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa, 0xbe0b1010,
+ 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
+ 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17,
+ 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6,
+ 0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615,
+ 0x73dc1683, 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8,
+ 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, 0xf00f9344,
+ 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb,
+ 0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a,
+ 0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
+ 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1,
+ 0xa6bc5767, 0x3fb506dd, 0x48b2364b, 0xd80d2bda, 0xaf0a1b4c,
+ 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef,
+ 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
+ 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe,
+ 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31,
+ 0x2cd99e8b, 0x5bdeae1d, 0x9b64c2b0, 0xec63f226, 0x756aa39c,
+ 0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
+ 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b,
+ 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242,
+ 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1,
+ 0x18b74777, 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c,
+ 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, 0xa00ae278,
+ 0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7,
+ 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc, 0x40df0b66,
+ 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
+ 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605,
+ 0xcdd70693, 0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8,
+ 0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b,
+ 0x2d02ef8d
+ };
+ unsigned char *end;
+
+ crc = ~crc & 0xffffffff;
+ for (end = buf + len; buf < end; ++buf)
+ crc = crc32_table[(crc ^ *buf) & 0xff] ^ (crc >> 8);
+ return ~crc & 0xffffffff;;
+}
+
+ULONGEST
+align_up (ULONGEST v, int n)
+{
+ /* Check that N is really a power of two. */
+ gdb_assert (n && (n & (n-1)) == 0);
+ return (v + n - 1) & -n;
+}
+
+ULONGEST
+align_down (ULONGEST v, int n)
+{
+ /* Check that N is really a power of two. */
+ gdb_assert (n && (n & (n-1)) == 0);
+ return (v & -n);
}