/* General utility routines for GDB, the GNU debugger.
- Copyright 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 1998, 1999, 2000, 2001
- Free Software Foundation, Inc.
+
+ Copyright 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
+ 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 Free Software
+ Foundation, Inc.
This file is part of GDB.
#include "gdb_string.h"
#include "event-top.h"
-#ifdef HAVE_CURSES_H
-#include <curses.h>
-#endif
-#ifdef HAVE_TERM_H
-#include <term.h>
-#endif
-
#ifdef __GO32__
#include <pc.h>
#endif
#include "demangle.h"
#include "expression.h"
#include "language.h"
+#include "charset.h"
#include "annotate.h"
+#include "filenames.h"
-#include "inferior.h" /* for signed_pointer_to_address */
+#include "inferior.h" /* for signed_pointer_to_address */
+
+#include <sys/param.h> /* For MAXPATHLEN */
+
+#ifdef HAVE_CURSES_H
+#include <curses.h>
+#endif
+#ifdef HAVE_TERM_H
+#include <term.h>
+#endif
#include <readline/readline.h>
-#ifndef MALLOC_INCOMPATIBLE
+#ifdef USE_MMALLOC
+#include "mmalloc.h"
+#endif
+
+#ifdef NEED_DECLARATION_MALLOC
+extern PTR malloc (); /* OK: PTR */
+#endif
#ifdef NEED_DECLARATION_REALLOC
-extern PTR realloc ();
+extern PTR realloc (); /* OK: PTR */
#endif
#ifdef NEED_DECLARATION_FREE
extern void free ();
#endif
+/* Actually, we'll never have the decl, since we don't define _GNU_SOURCE. */
+#if defined(HAVE_CANONICALIZE_FILE_NAME) \
+ && defined(NEED_DECLARATION_CANONICALIZE_FILE_NAME)
+extern char *canonicalize_file_name (const char *);
#endif
-#undef XMALLOC
-#define XMALLOC(TYPE) ((TYPE*) xmalloc (sizeof (TYPE)))
-
/* readline defines this. */
#undef savestring
static struct cleanup *run_cleanup_chain; /* cleaned up on each 'run' */
static struct cleanup *exec_cleanup_chain; /* cleaned up on each execution command */
/* cleaned up on each error from within an execution command */
-static struct cleanup *exec_error_cleanup_chain;
+static struct cleanup *exec_error_cleanup_chain;
/* Pointer to what is left to do for an execution command after the
target stops. Used only in asynchronous mode, by targets that
int immediate_quit;
-/* Nonzero means that encoded C++ names should be printed out in their
- C++ form rather than raw. */
+/* Nonzero means that encoded C++/ObjC names should be printed out in their
+ C++/ObjC form rather than raw. */
int demangle = 1;
-/* Nonzero means that encoded C++ names should be printed out in their
- C++ form even in assembler language displays. If this is set, but
+/* Nonzero means that encoded C++/ObjC names should be printed out in their
+ C++/ObjC form even in assembler language displays. If this is set, but
DEMANGLE is zero, names are printed raw, i.e. DEMANGLE controls. */
int asm_demangle = 0;
void *arg)
{
register struct cleanup *new
- = (struct cleanup *) xmalloc (sizeof (struct cleanup));
+ = (struct cleanup *) xmalloc (sizeof (struct cleanup));
register struct cleanup *old_chain = *pmy_chain;
new->next = *pmy_chain;
{
struct continuation *continuation_ptr;
- continuation_ptr = (struct continuation *) xmalloc (sizeof (struct continuation));
+ continuation_ptr =
+ (struct continuation *) xmalloc (sizeof (struct continuation));
continuation_ptr->continuation_hook = continuation_hook;
continuation_ptr->arg_list = arg_list;
continuation_ptr->next = cmd_continuation;
/* Work now on the list we have set aside. */
while (continuation_ptr)
- {
- (continuation_ptr->continuation_hook) (continuation_ptr->arg_list);
- saved_continuation = continuation_ptr;
- continuation_ptr = continuation_ptr->next;
- xfree (saved_continuation);
- }
+ {
+ (continuation_ptr->continuation_hook) (continuation_ptr->arg_list);
+ saved_continuation = continuation_ptr;
+ continuation_ptr = continuation_ptr->next;
+ xfree (saved_continuation);
+ }
}
/* Walk down the cmd_continuation list, and get rid of all the
{
struct continuation *continuation_ptr;
- continuation_ptr = (struct continuation *) xmalloc (sizeof (struct continuation));
+ continuation_ptr =
+ (struct continuation *) xmalloc (sizeof (struct continuation));
continuation_ptr->continuation_hook = continuation_hook;
continuation_ptr->arg_list = arg_list;
continuation_ptr->next = intermediate_continuation;
/* Work now on the list we have set aside. */
while (continuation_ptr)
- {
- (continuation_ptr->continuation_hook) (continuation_ptr->arg_list);
- saved_continuation = continuation_ptr;
- continuation_ptr = continuation_ptr->next;
- xfree (saved_continuation);
- }
+ {
+ (continuation_ptr->continuation_hook) (continuation_ptr->arg_list);
+ saved_continuation = continuation_ptr;
+ continuation_ptr = continuation_ptr->next;
+ xfree (saved_continuation);
+ }
}
/* Walk down the cmd_continuation list, and get rid of all the
xfree (continuation_ptr);
}
}
-
\f
-/* Print a warning message. Way to use this is to call warning_begin,
- output the warning message (use unfiltered output to gdb_stderr),
- ending in a newline. There is not currently a warning_end that you
- call afterwards, but such a thing might be added if it is useful
- for a GUI to separate warning messages from other output.
-
- FIXME: Why do warnings use unfiltered output and errors filtered?
- Is this anything other than a historical accident? */
-
-void
-warning_begin (void)
-{
- target_terminal_ours ();
- wrap_here (""); /* Force out any buffered output */
- gdb_flush (gdb_stdout);
- if (warning_pre_print)
- fprintf_unfiltered (gdb_stderr, warning_pre_print);
-}
-/* Print a warning message.
- The first argument STRING is the warning message, used as a fprintf string,
- and the remaining args are passed as arguments to it.
- The primary difference between warnings and errors is that a warning
- does not force the return to command level. */
+/* Print a warning message. The first argument STRING is the warning
+ message, used as an fprintf format string, the second is the
+ va_list of arguments for that string. A warning is unfiltered (not
+ paginated) so that the user does not need to page through each
+ screen full of warnings when there are lots of them. */
void
-warning (const char *string,...)
+vwarning (const char *string, va_list args)
{
- va_list args;
- va_start (args, string);
if (warning_hook)
(*warning_hook) (string, args);
else
{
- warning_begin ();
+ target_terminal_ours ();
+ wrap_here (""); /* Force out any buffered output */
+ gdb_flush (gdb_stdout);
+ if (warning_pre_print)
+ fprintf_unfiltered (gdb_stderr, warning_pre_print);
vfprintf_unfiltered (gdb_stderr, string, args);
fprintf_unfiltered (gdb_stderr, "\n");
va_end (args);
}
}
-/* Start the printing of an error message. Way to use this is to call
- this, output the error message (use filtered output to gdb_stderr
- (FIXME: Some callers, like memory_error, use gdb_stdout)), ending
- in a newline, and then call return_to_top_level (RETURN_ERROR).
- error() provides a convenient way to do this for the special case
- that the error message can be formatted with a single printf call,
- but this is more general. */
+/* Print a warning message.
+ The first argument STRING is the warning message, used as a fprintf string,
+ and the remaining args are passed as arguments to it.
+ The primary difference between warnings and errors is that a warning
+ does not force the return to command level. */
+
void
-error_begin (void)
+warning (const char *string, ...)
{
- if (error_begin_hook)
- error_begin_hook ();
-
- target_terminal_ours ();
- wrap_here (""); /* Force out any buffered output */
- gdb_flush (gdb_stdout);
-
- annotate_error_begin ();
-
- if (error_pre_print)
- fprintf_filtered (gdb_stderr, error_pre_print);
+ va_list args;
+ va_start (args, string);
+ vwarning (string, args);
+ va_end (args);
}
/* Print an error message and return to command level.
NORETURN void
verror (const char *string, va_list args)
{
- char *err_string;
- struct cleanup *err_string_cleanup;
- /* FIXME: cagney/1999-11-10: All error calls should come here.
- Unfortunately some code uses the sequence: error_begin(); print
- error message; return_to_top_level. That code should be
- flushed. */
- error_begin ();
- /* NOTE: It's tempting to just do the following...
- vfprintf_filtered (gdb_stderr, string, args);
- and then follow with a similar looking statement to cause the message
- to also go to gdb_lasterr. But if we do this, we'll be traversing the
- va_list twice which works on some platforms and fails miserably on
- others. */
- /* Save it as the last error */
- ui_file_rewind (gdb_lasterr);
- vfprintf_filtered (gdb_lasterr, string, args);
- /* Retrieve the last error and print it to gdb_stderr */
- err_string = error_last_message ();
- err_string_cleanup = make_cleanup (xfree, err_string);
- fputs_filtered (err_string, gdb_stderr);
- fprintf_filtered (gdb_stderr, "\n");
- do_cleanups (err_string_cleanup);
- return_to_top_level (RETURN_ERROR);
+ struct ui_file *tmp_stream = mem_fileopen ();
+ make_cleanup_ui_file_delete (tmp_stream);
+ vfprintf_unfiltered (tmp_stream, string, args);
+ error_stream (tmp_stream);
}
NORETURN void
-error (const char *string,...)
+error (const char *string, ...)
{
va_list args;
va_start (args, string);
va_end (args);
}
+static void
+do_write (void *data, const char *buffer, long length_buffer)
+{
+ ui_file_write (data, buffer, length_buffer);
+}
+
NORETURN void
error_stream (struct ui_file *stream)
{
- long size;
- char *msg = ui_file_xstrdup (stream, &size);
- make_cleanup (xfree, msg);
- error ("%s", msg);
+ if (error_begin_hook)
+ error_begin_hook ();
+
+ /* Copy the stream into the GDB_LASTERR buffer. */
+ ui_file_rewind (gdb_lasterr);
+ ui_file_put (stream, do_write, gdb_lasterr);
+
+ /* Write the message plus any error_pre_print to gdb_stderr. */
+ target_terminal_ours ();
+ wrap_here (""); /* Force out any buffered output */
+ gdb_flush (gdb_stdout);
+ annotate_error_begin ();
+ if (error_pre_print)
+ fprintf_filtered (gdb_stderr, error_pre_print);
+ ui_file_put (stream, do_write, gdb_stderr);
+ fprintf_filtered (gdb_stderr, "\n");
+
+ throw_exception (RETURN_ERROR);
}
/* Get the last error message issued by gdb */
long len;
return ui_file_xstrdup (gdb_lasterr, &len);
}
-
+
/* This is to be called by main() at the very beginning */
void
gdb_lasterr = mem_fileopen ();
}
-/* Print a message reporting an internal error. Ask the user if they
- want to continue, dump core, or just exit. */
+/* Print a message reporting an internal error/warning. Ask the user
+ if they want to continue, dump core, or just exit. Return
+ something to indicate a quit. */
-NORETURN void
-internal_verror (const char *file, int line,
- const char *fmt, va_list ap)
+struct internal_problem
+{
+ const char *name;
+ /* FIXME: cagney/2002-08-15: There should be ``maint set/show''
+ commands available for controlling these variables. */
+ enum auto_boolean should_quit;
+ enum auto_boolean should_dump_core;
+};
+
+/* Report a problem, internal to GDB, to the user. Once the problem
+ has been reported, and assuming GDB didn't quit, the caller can
+ either allow execution to resume or throw an error. */
+
+static void
+internal_vproblem (struct internal_problem *problem,
+ const char *file, int line, const char *fmt, va_list ap)
{
- static char msg[] = "Internal GDB error: recursive internal error.\n";
- static int dejavu = 0;
- int continue_p;
+ static char msg[] = "Recursive internal problem.\n";
+ static int dejavu;
+ int quit_p;
int dump_core_p;
- /* don't allow infinite error recursion. */
+ /* Don't allow infinite error/warning recursion. */
switch (dejavu)
{
case 0:
case 1:
dejavu = 2;
fputs_unfiltered (msg, gdb_stderr);
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
+ abort (); /* NOTE: GDB has only three calls to abort(). */
default:
dejavu = 3;
write (STDERR_FILENO, msg, sizeof (msg));
exit (1);
}
- /* Try to get the message out */
+ /* Try to get the message out and at the start of a new line. */
target_terminal_ours ();
- fprintf_unfiltered (gdb_stderr, "%s:%d: gdb-internal-error: ", file, line);
+ begin_line ();
+
+ /* The error/warning message. Format using a style similar to a
+ compiler error message. */
+ fprintf_unfiltered (gdb_stderr, "%s:%d: %s: ", file, line, problem->name);
vfprintf_unfiltered (gdb_stderr, fmt, ap);
fputs_unfiltered ("\n", gdb_stderr);
- /* Default (no case) is to quit GDB. When in batch mode this
- lessens the likelhood of GDB going into an infinate loop. */
- continue_p = query ("\
-An internal GDB error was detected. This may make further\n\
-debugging unreliable. Continue this debugging session? ");
+ /* Provide more details so that the user knows that they are living
+ on the edge. */
+ fprintf_unfiltered (gdb_stderr, "\
+A problem internal to GDB has been detected. Further\n\
+debugging may prove unreliable.\n");
- /* Default (no case) is to not dump core. Lessen the chance of GDB
- leaving random core files around. */
- dump_core_p = query ("\
-Create a core file containing the current state of GDB? ");
+ switch (problem->should_quit)
+ {
+ case AUTO_BOOLEAN_AUTO:
+ /* Default (yes/batch case) is to quit GDB. When in batch mode
+ this lessens the likelhood of GDB going into an infinate
+ loop. */
+ quit_p = query ("Quit this debugging session? ");
+ break;
+ case AUTO_BOOLEAN_TRUE:
+ quit_p = 1;
+ break;
+ case AUTO_BOOLEAN_FALSE:
+ quit_p = 0;
+ break;
+ default:
+ internal_error (__FILE__, __LINE__, "bad switch");
+ }
- if (continue_p)
+ switch (problem->should_dump_core)
{
- if (dump_core_p)
- {
- if (fork () == 0)
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
- }
+ case AUTO_BOOLEAN_AUTO:
+ /* Default (yes/batch case) is to dump core. This leaves a GDB
+ `dropping' so that it is easier to see that something went
+ wrong in GDB. */
+ dump_core_p = query ("Create a core file of GDB? ");
+ break;
+ break;
+ case AUTO_BOOLEAN_TRUE:
+ dump_core_p = 1;
+ break;
+ case AUTO_BOOLEAN_FALSE:
+ dump_core_p = 0;
+ break;
+ default:
+ internal_error (__FILE__, __LINE__, "bad switch");
}
- else
+
+ if (quit_p)
{
if (dump_core_p)
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
+ abort (); /* NOTE: GDB has only three calls to abort(). */
else
exit (1);
}
+ else
+ {
+ if (dump_core_p)
+ {
+ if (fork () == 0)
+ abort (); /* NOTE: GDB has only three calls to abort(). */
+ }
+ }
dejavu = 0;
- return_to_top_level (RETURN_ERROR);
+}
+
+static struct internal_problem internal_error_problem = {
+ "internal-error", AUTO_BOOLEAN_AUTO, AUTO_BOOLEAN_AUTO
+};
+
+NORETURN void
+internal_verror (const char *file, int line, const char *fmt, va_list ap)
+{
+ internal_vproblem (&internal_error_problem, file, line, fmt, ap);
+ throw_exception (RETURN_ERROR);
}
NORETURN void
{
va_list ap;
va_start (ap, string);
-
internal_verror (file, line, string, ap);
va_end (ap);
}
+static struct internal_problem internal_warning_problem = {
+ "internal-error", AUTO_BOOLEAN_AUTO, AUTO_BOOLEAN_AUTO
+};
+
+void
+internal_vwarning (const char *file, int line, const char *fmt, va_list ap)
+{
+ internal_vproblem (&internal_warning_problem, file, line, fmt, ap);
+}
+
+void
+internal_warning (const char *file, int line, const char *string, ...)
+{
+ va_list ap;
+ va_start (ap, string);
+ internal_vwarning (file, line, string, ap);
+ va_end (ap);
+}
+
/* The strerror() function can return NULL for errno values that are
out of range. Provide a "safe" version that always returns a
printable string. */
char *msg;
static char buf[32];
- if ((msg = strerror (errnum)) == NULL)
+ msg = strerror (errnum);
+ if (msg == NULL)
{
sprintf (buf, "(undocumented errno %d)", errnum);
msg = buf;
Then return to command level. */
NORETURN void
-perror_with_name (char *string)
+perror_with_name (const char *string)
{
char *err;
char *combined;
as the file name for which the error was encountered. */
void
-print_sys_errmsg (char *string, int errcode)
+print_sys_errmsg (const char *string, int errcode)
{
char *err;
char *combined;
void
quit (void)
{
- serial_t gdb_stdout_serial = serial_fdopen (1);
+ struct serial *gdb_stdout_serial = serial_fdopen (1);
target_terminal_ours ();
gdb_flush (gdb_stderr);
/* 3. The system-level buffer. */
- SERIAL_DRAIN_OUTPUT (gdb_stdout_serial);
- SERIAL_UN_FDOPEN (gdb_stdout_serial);
+ serial_drain_output (gdb_stdout_serial);
+ serial_un_fdopen (gdb_stdout_serial);
annotate_error_begin ();
fprintf_unfiltered (gdb_stderr, "Quit\n");
#else
if (job_control
- /* If there is no terminal switching for this target, then we can't
- possibly get screwed by the lack of job control. */
+ /* If there is no terminal switching for this target, then we can't
+ possibly get screwed by the lack of job control. */
|| current_target.to_terminal_ours == NULL)
fprintf_unfiltered (gdb_stderr, "Quit\n");
else
fprintf_unfiltered (gdb_stderr,
- "Quit (expect signal SIGINT when the program is resumed)\n");
+ "Quit (expect signal SIGINT when the program is resumed)\n");
#endif
- return_to_top_level (RETURN_QUIT);
-}
-
-
-#if defined(_MSC_VER) /* should test for wingdb instead? */
-
-/*
- * Windows translates all keyboard and mouse events
- * into a message which is appended to the message
- * queue for the process.
- */
-
-void
-notice_quit (void)
-{
- int k = win32pollquit ();
- if (k == 1)
- quit_flag = 1;
- else if (k == 2)
- immediate_quit = 1;
-}
-
-#else /* !defined(_MSC_VER) */
-
-void
-notice_quit (void)
-{
- /* Done by signals */
+ throw_exception (RETURN_QUIT);
}
-#endif /* !defined(_MSC_VER) */
-
/* Control C comes here */
void
request_quit (int signo)
\f
/* Memory management stuff (malloc friends). */
-/* Make a substitute size_t for non-ANSI compilers. */
-
-#ifndef HAVE_STDDEF_H
-#ifndef size_t
-#define size_t unsigned int
-#endif
-#endif
-
#if !defined (USE_MMALLOC)
-PTR
-mcalloc (PTR md, size_t number, size_t size)
+static void *
+mmalloc (void *md, size_t size)
{
- return calloc (number, size);
+ return malloc (size); /* NOTE: GDB's only call to malloc() */
}
-PTR
-mmalloc (PTR md, size_t size)
+static void *
+mrealloc (void *md, void *ptr, size_t size)
{
- return malloc (size);
+ if (ptr == 0) /* Guard against old realloc's */
+ return mmalloc (md, size);
+ else
+ return realloc (ptr, size); /* NOTE: GDB's only call to ralloc() */
}
-PTR
-mrealloc (PTR md, PTR ptr, size_t size)
+static void *
+mcalloc (void *md, size_t number, size_t size)
{
- if (ptr == 0) /* Guard against old realloc's */
- return malloc (size);
- else
- return realloc (ptr, size);
+ return calloc (number, size); /* NOTE: GDB's only call to calloc() */
}
-void
-mfree (PTR md, PTR ptr)
+static void
+mfree (void *md, void *ptr)
{
- xfree (ptr);
+ free (ptr); /* NOTE: GDB's only call to free() */
}
#endif /* USE_MMALLOC */
initialize_all_files(). */
fprintf_unfiltered
- (gdb_stderr, "warning: failed to install memory consistency checks; ");
- fprintf_unfiltered
- (gdb_stderr, "configuration should define NO_MMCHECK or MMCHECK_FORCE\n");
+ (gdb_stderr,
+ "warning: failed to install memory consistency checks; ");
+ fprintf_unfiltered (gdb_stderr,
+ "configuration should define NO_MMCHECK or MMCHECK_FORCE\n");
}
mmtrace ();
if (size > 0)
{
internal_error (__FILE__, __LINE__,
- "virtual memory exhausted: can't allocate %ld bytes.", size);
+ "virtual memory exhausted: can't allocate %ld bytes.",
+ size);
}
else
{
- internal_error (__FILE__, __LINE__,
- "virtual memory exhausted.");
+ internal_error (__FILE__, __LINE__, "virtual memory exhausted.");
}
}
-/* Like mmalloc but get error if no storage available, and protect against
- the caller wanting to allocate zero bytes. Whether to return NULL for
- a zero byte request, or translate the request into a request for one
- byte of zero'd storage, is a religious issue. */
+/* The xmmalloc() family of memory management routines.
-PTR
-xmmalloc (PTR md, long size)
+ These are are like the mmalloc() family except that they implement
+ consistent semantics and guard against typical memory management
+ problems: if a malloc fails, an internal error is thrown; if
+ free(NULL) is called, it is ignored; if *alloc(0) is called, NULL
+ is returned.
+
+ All these routines are implemented using the mmalloc() family. */
+
+void *
+xmmalloc (void *md, size_t size)
{
- register PTR val;
+ void *val;
if (size == 0)
{
val = NULL;
}
- else if ((val = mmalloc (md, size)) == NULL)
+ else
{
- nomem (size);
+ val = mmalloc (md, size);
+ if (val == NULL)
+ nomem (size);
}
return (val);
}
-/* Like mrealloc but get error if no storage available. */
-
-PTR
-xmrealloc (PTR md, PTR ptr, long size)
+void *
+xmrealloc (void *md, void *ptr, size_t size)
{
- register PTR val;
+ void *val;
if (size == 0)
{
return (val);
}
-/* Like malloc but get error if no storage available, and protect against
- the caller wanting to allocate zero bytes. */
-
-PTR
-xmalloc (size_t size)
-{
- return (xmmalloc ((PTR) NULL, size));
-}
-
-/* Like calloc but get error if no storage available */
-
-PTR
-xcalloc (size_t number, size_t size)
+void *
+xmcalloc (void *md, size_t number, size_t size)
{
void *mem;
-
if (number == 0 || size == 0)
mem = NULL;
else
{
- mem = mcalloc (NULL, number, size);
+ mem = mcalloc (md, number, size);
if (mem == NULL)
nomem (number * size);
}
return mem;
}
-/* Like mrealloc but get error if no storage available. */
+void
+xmfree (void *md, void *ptr)
+{
+ if (ptr != NULL)
+ mfree (md, ptr);
+}
+
+/* The xmalloc() (libiberty.h) family of memory management routines.
+
+ These are like the ISO-C malloc() family except that they implement
+ consistent semantics and guard against typical memory management
+ problems. See xmmalloc() above for further information.
+
+ All these routines are wrappers to the xmmalloc() family. */
+
+/* NOTE: These are declared using PTR to ensure consistency with
+ "libiberty.h". xfree() is GDB local. */
+
+PTR /* OK: PTR */
+xmalloc (size_t size)
+{
+ return xmmalloc (NULL, size);
+}
-PTR
-xrealloc (PTR ptr, size_t size)
+PTR /* OK: PTR */
+xrealloc (PTR ptr, size_t size) /* OK: PTR */
{
- return (xmrealloc ((PTR) NULL, ptr, size));
+ return xmrealloc (NULL, ptr, size);
}
-/* Free up space allocated by one of xmalloc(), xcalloc(), or
- xrealloc(). */
+PTR /* OK: PTR */
+xcalloc (size_t number, size_t size)
+{
+ return xmcalloc (NULL, number, size);
+}
void
xfree (void *ptr)
{
- if (ptr != NULL)
- free (ptr); /* NOTE: GDB's only call to free() */
+ xmfree (NULL, ptr);
}
\f
badly format string; or something else. */
if ((*ret) == NULL)
internal_error (__FILE__, __LINE__,
- "vasprintf returned NULL buffer (errno %d)",
- errno);
+ "vasprintf returned NULL buffer (errno %d)", errno);
/* A negative status with a non-NULL buffer shouldn't never
happen. But to be sure. */
if (status < 0)
internal_error (__FILE__, __LINE__,
- "vasprintf call failed (errno %d)",
- errno);
+ "vasprintf call failed (errno %d)", errno);
}
/* VARARGS */
int
-query (char *ctlstr,...)
+query (const char *ctlstr, ...)
{
va_list args;
register int answer;
/* Automatically answer "yes" if input is not from a terminal. */
if (!input_from_terminal_p ())
return 1;
-#ifdef MPW
- /* FIXME Automatically answer "yes" if called from MacGDB. */
- if (mac_app)
- return 1;
-#endif /* MPW */
while (1)
{
if (annotation_level > 1)
printf_filtered ("\n\032\032query\n");
-#ifdef MPW
- /* If not in MacGDB, move to a new line so the entered line doesn't
- have a prompt on the front of it. */
- if (!mac_app)
- fputs_unfiltered ("\n", gdb_stdout);
-#endif /* MPW */
-
wrap_here ("");
gdb_flush (gdb_stdout);
-#if defined(TUI)
- if (!tui_version || cmdWin == tuiWinWithFocus ())
-#endif
- answer = fgetc (stdin);
-#if defined(TUI)
- else
- answer = (unsigned char) tuiBufferGetc ();
-
-#endif
+ answer = fgetc (stdin);
clearerr (stdin); /* in case of C-d */
if (answer == EOF) /* C-d */
{
break;
}
/* Eat rest of input line, to EOF or newline */
- if ((answer != '\n') || (tui_version && answer != '\r'))
+ if (answer != '\n')
do
{
-#if defined(TUI)
- if (!tui_version || cmdWin == tuiWinWithFocus ())
-#endif
- ans2 = fgetc (stdin);
-#if defined(TUI)
- else
- ans2 = (unsigned char) tuiBufferGetc ();
-#endif
+ ans2 = fgetc (stdin);
clearerr (stdin);
}
while (ans2 != EOF && ans2 != '\n' && ans2 != '\r');
- TUIDO (((TuiOpaqueFuncPtr) tui_vStartNewLines, 1));
if (answer >= 'a')
answer -= 040;
}
\f
+/* Print an error message saying that we couldn't make sense of a
+ \^mumble sequence in a string or character constant. START and END
+ indicate a substring of some larger string that contains the
+ erroneous backslash sequence, missing the initial backslash. */
+static NORETURN int
+no_control_char_error (const char *start, const char *end)
+{
+ int len = end - start;
+ char *copy = alloca (end - start + 1);
+
+ memcpy (copy, start, len);
+ copy[len] = '\0';
+
+ error ("There is no control character `\\%s' in the `%s' character set.",
+ copy, target_charset ());
+}
+
/* Parse a C escape sequence. STRING_PTR points to a variable
containing a pointer to the string to parse. That pointer
should point to the character after the \. That pointer
int
parse_escape (char **string_ptr)
{
+ int target_char;
register int c = *(*string_ptr)++;
- switch (c)
- {
- case 'a':
- return 007; /* Bell (alert) char */
- case 'b':
- return '\b';
- case 'e': /* Escape character */
- return 033;
- case 'f':
- return '\f';
- case 'n':
- return '\n';
- case 'r':
- return '\r';
- case 't':
- return '\t';
- case 'v':
- return '\v';
- case '\n':
- return -2;
- case 0:
- (*string_ptr)--;
- return 0;
- case '^':
- c = *(*string_ptr)++;
- if (c == '\\')
- c = parse_escape (string_ptr);
- if (c == '?')
- return 0177;
- return (c & 0200) | (c & 037);
-
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
+ if (c_parse_backslash (c, &target_char))
+ return target_char;
+ else
+ switch (c)
{
- register int i = c - '0';
- register int count = 0;
- while (++count < 3)
- {
- if ((c = *(*string_ptr)++) >= '0' && c <= '7')
- {
- i *= 8;
- i += c - '0';
- }
- else
- {
- (*string_ptr)--;
- break;
- }
- }
- return i;
+ case '\n':
+ return -2;
+ case 0:
+ (*string_ptr)--;
+ return 0;
+ case '^':
+ {
+ /* Remember where this escape sequence started, for reporting
+ errors. */
+ char *sequence_start_pos = *string_ptr - 1;
+
+ c = *(*string_ptr)++;
+
+ if (c == '?')
+ {
+ /* XXXCHARSET: What is `delete' in the host character set? */
+ c = 0177;
+
+ if (!host_char_to_target (c, &target_char))
+ error ("There is no character corresponding to `Delete' "
+ "in the target character set `%s'.", host_charset ());
+
+ return target_char;
+ }
+ else if (c == '\\')
+ target_char = parse_escape (string_ptr);
+ else
+ {
+ if (!host_char_to_target (c, &target_char))
+ no_control_char_error (sequence_start_pos, *string_ptr);
+ }
+
+ /* Now target_char is something like `c', and we want to find
+ its control-character equivalent. */
+ if (!target_char_to_control_char (target_char, &target_char))
+ no_control_char_error (sequence_start_pos, *string_ptr);
+
+ return target_char;
+ }
+
+ /* XXXCHARSET: we need to use isdigit and value-of-digit
+ methods of the host character set here. */
+
+ case '0':
+ case '1':
+ case '2':
+ case '3':
+ case '4':
+ case '5':
+ case '6':
+ case '7':
+ {
+ register int i = c - '0';
+ register int count = 0;
+ while (++count < 3)
+ {
+ c = (**string_ptr);
+ if (c >= '0' && c <= '7')
+ {
+ (*string_ptr)++;
+ i *= 8;
+ i += c - '0';
+ }
+ else
+ {
+ break;
+ }
+ }
+ return i;
+ }
+ default:
+ if (!host_char_to_target (c, &target_char))
+ error
+ ("The escape sequence `\%c' is equivalent to plain `%c', which"
+ " has no equivalent\n" "in the `%s' character set.", c, c,
+ target_charset ());
+ return target_char;
}
- default:
- return c;
- }
}
\f
/* Print the character C on STREAM as part of the contents of a literal
}
void
-fputstrn_unfiltered (const char *str, int n, int quoter, struct ui_file *stream)
+fputstrn_unfiltered (const char *str, int n, int quoter,
+ struct ui_file *stream)
{
int i;
for (i = 0; i < n; i++)
printchar (str[i], fputs_unfiltered, fprintf_unfiltered, stream, quoter);
}
-
\f
+
/* Number of lines per page or UINT_MAX if paging is disabled. */
static unsigned int lines_per_page;
/* Number of chars per line or UINT_MAX if line folding is disabled. */
init_page_info (void)
{
#if defined(TUI)
- if (tui_version && m_winPtrNotNull (cmdWin))
- {
- lines_per_page = cmdWin->generic.height;
- chars_per_line = cmdWin->generic.width;
- }
- else
+ if (!tui_get_command_dimension (&chars_per_line, &lines_per_page))
#endif
{
/* These defaults will be used if we are unable to get the correct
lines_per_page = 24;
chars_per_line = 80;
-#if !defined (MPW) && !defined (_WIN32)
- /* No termcap under MPW, although might be cool to do something
- by looking at worksheet or console window sizes. */
+#if !defined (_WIN32)
/* Initialize the screen height and width from termcap. */
{
char *termtype = getenv ("TERM");
}
}
}
-#endif /* MPW */
+#endif
#if defined(SIGWINCH) && defined(SIGWINCH_HANDLER)
/* Call readline, not gdb_readline, because GO32 readline handles control-C
whereas control-C to gdb_readline will cause the user to get dumped
out to DOS. */
- ignore = readline (cont_prompt);
+ ignore = gdb_readline_wrapper (cont_prompt);
if (annotation_level > 1)
printf_unfiltered ("\n\032\032post-prompt-for-continue\n");
}
}
-/* Ensure that whatever gets printed next, using the filtered output
- commands, starts at the beginning of the line. I.E. if there is
- any pending output for the current line, flush it and start a new
- line. Otherwise do nothing. */
+/* Print input string to gdb_stdout, filtered, with wrap,
+ arranging strings in columns of n chars. String can be
+ right or left justified in the column. Never prints
+ trailing spaces. String should never be longer than
+ width. FIXME: this could be useful for the EXAMINE
+ command, which currently doesn't tabulate very well */
void
-begin_line (void)
+puts_filtered_tabular (char *string, int width, int right)
{
- if (chars_printed > 0)
+ int spaces = 0;
+ int stringlen;
+ char *spacebuf;
+
+ gdb_assert (chars_per_line > 0);
+ if (chars_per_line == UINT_MAX)
{
- puts_filtered ("\n");
+ fputs_filtered (string, gdb_stdout);
+ fputs_filtered ("\n", gdb_stdout);
+ return;
}
-}
+ if (((chars_printed - 1) / width + 2) * width >= chars_per_line)
+ fputs_filtered ("\n", gdb_stdout);
-/* Like fputs but if FILTER is true, pause after every screenful.
+ if (width >= chars_per_line)
+ width = chars_per_line - 1;
+
+ stringlen = strlen (string);
+
+ if (chars_printed > 0)
+ spaces = width - (chars_printed - 1) % width - 1;
+ if (right)
+ spaces += width - stringlen;
+
+ spacebuf = alloca (spaces + 1);
+ spacebuf[spaces] = '\0';
+ while (spaces--)
+ spacebuf[spaces] = ' ';
+
+ fputs_filtered (spacebuf, gdb_stdout);
+ fputs_filtered (string, gdb_stdout);
+}
+
+
+/* Ensure that whatever gets printed next, using the filtered output
+ commands, starts at the beginning of the line. I.E. if there is
+ any pending output for the current line, flush it and start a new
+ line. Otherwise do nothing. */
+
+void
+begin_line (void)
+{
+ if (chars_printed > 0)
+ {
+ puts_filtered ("\n");
+ }
+}
+
+
+/* Like fputs but if FILTER is true, pause after every screenful.
Regardless of FILTER can wrap at points other than the final
character of a line.
while (*lineptr)
{
/* Possible new page. */
- if (filter &&
- (lines_printed >= lines_per_page - 1))
+ if (filter && (lines_printed >= lines_per_page - 1))
prompt_for_continue ();
while (*lineptr && *lineptr != '\n')
if (wrap_column)
{
fputs_unfiltered (wrap_indent, stream);
- *wrap_pointer = '\0'; /* Null-terminate saved stuff */
+ *wrap_pointer = '\0'; /* Null-terminate saved stuff */
fputs_unfiltered (wrap_buffer, stream); /* and eject it */
/* FIXME, this strlen is what prevents wrap_indent from
containing tabs. However, if we recurse to print it
}
void
-fprintf_filtered (struct ui_file * stream, const char *format,...)
+fprintf_filtered (struct ui_file *stream, const char *format, ...)
{
va_list args;
va_start (args, format);
}
void
-fprintf_unfiltered (struct ui_file * stream, const char *format,...)
+fprintf_unfiltered (struct ui_file *stream, const char *format, ...)
{
va_list args;
va_start (args, format);
Called as fprintfi_filtered (spaces, stream, format, ...); */
void
-fprintfi_filtered (int spaces, struct ui_file * stream, const char *format,...)
+fprintfi_filtered (int spaces, struct ui_file *stream, const char *format,
+ ...)
{
va_list args;
va_start (args, format);
void
-printf_filtered (const char *format,...)
+printf_filtered (const char *format, ...)
{
va_list args;
va_start (args, format);
void
-printf_unfiltered (const char *format,...)
+printf_unfiltered (const char *format, ...)
{
va_list args;
va_start (args, format);
Called as printfi_filtered (spaces, format, ...); */
void
-printfi_filtered (int spaces, const char *format,...)
+printfi_filtered (int spaces, const char *format, ...)
{
va_list args;
va_start (args, format);
fputs_filtered (n_spaces (n), stream);
}
\f
-/* C++ demangler stuff. */
+/* C++/ObjC demangler stuff. */
/* fprintf_symbol_filtered attempts to demangle NAME, a symbol in language
LANG, using demangling args ARG_MODE, and print it filtered to STREAM.
demangling is off, the name is printed in its "raw" form. */
void
-fprintf_symbol_filtered (struct ui_file *stream, char *name, enum language lang,
- int arg_mode)
+fprintf_symbol_filtered (struct ui_file *stream, char *name,
+ enum language lang, int arg_mode)
{
char *demangled;
}
else
{
- switch (lang)
- {
- case language_cplus:
- demangled = cplus_demangle (name, arg_mode);
- break;
- case language_java:
- demangled = cplus_demangle (name, arg_mode | DMGL_JAVA);
- break;
- case language_chill:
- demangled = chill_demangle (name);
- break;
- default:
- demangled = NULL;
- break;
- }
+ demangled = language_demangle (language_def (lang), name, arg_mode);
fputs_filtered (demangled ? demangled : name, stream);
if (demangled != NULL)
{
}
return (*string1 != '\0' && *string1 != '(') || (*string2 != '\0');
}
+
+/* This is like strcmp except that it ignores whitespace and treats
+ '(' as the first non-NULL character in terms of ordering. Like
+ strcmp (and unlike strcmp_iw), it returns negative if STRING1 <
+ STRING2, 0 if STRING2 = STRING2, and positive if STRING1 > STRING2
+ according to that ordering.
+
+ If a list is sorted according to this function and if you want to
+ find names in the list that match some fixed NAME according to
+ strcmp_iw(LIST_ELT, NAME), then the place to start looking is right
+ where this function would put NAME.
+
+ Here are some examples of why using strcmp to sort is a bad idea:
+
+ Whitespace example:
+
+ Say your partial symtab contains: "foo<char *>", "goo". Then, if
+ we try to do a search for "foo<char*>", strcmp will locate this
+ after "foo<char *>" and before "goo". Then lookup_partial_symbol
+ will start looking at strings beginning with "goo", and will never
+ see the correct match of "foo<char *>".
+
+ Parenthesis example:
+
+ In practice, this is less like to be an issue, but I'll give it a
+ shot. Let's assume that '$' is a legitimate character to occur in
+ symbols. (Which may well even be the case on some systems.) Then
+ say that the partial symbol table contains "foo$" and "foo(int)".
+ strcmp will put them in this order, since '$' < '('. Now, if the
+ user searches for "foo", then strcmp will sort "foo" before "foo$".
+ Then lookup_partial_symbol will notice that strcmp_iw("foo$",
+ "foo") is false, so it won't proceed to the actual match of
+ "foo(int)" with "foo". */
+
+int
+strcmp_iw_ordered (const char *string1, const char *string2)
+{
+ while ((*string1 != '\0') && (*string2 != '\0'))
+ {
+ while (isspace (*string1))
+ {
+ string1++;
+ }
+ while (isspace (*string2))
+ {
+ string2++;
+ }
+ if (*string1 != *string2)
+ {
+ break;
+ }
+ if (*string1 != '\0')
+ {
+ string1++;
+ string2++;
+ }
+ }
+
+ switch (*string1)
+ {
+ /* Characters are non-equal unless they're both '\0'; we want to
+ make sure we get the comparison right according to our
+ comparison in the cases where one of them is '\0' or '('. */
+ case '\0':
+ if (*string2 == '\0')
+ return 0;
+ else
+ return -1;
+ case '(':
+ if (*string2 == '\0')
+ return 1;
+ else
+ return -1;
+ default:
+ if (*string2 == '(')
+ return 1;
+ else
+ return *string1 - *string2;
+ }
+}
+
+/* A simple comparison function with opposite semantics to strcmp. */
+
+int
+streq (const char *lhs, const char *rhs)
+{
+ return !strcmp (lhs, rhs);
+}
\f
/*
subset_compare (char *string_to_compare, char *template_string)
{
int match;
- if (template_string != (char *) NULL && string_to_compare != (char *) NULL &&
- strlen (string_to_compare) <= strlen (template_string))
- match = (strncmp (template_string,
- string_to_compare,
- strlen (string_to_compare)) == 0);
+ if (template_string != (char *) NULL && string_to_compare != (char *) NULL
+ && strlen (string_to_compare) <= strlen (template_string))
+ match =
+ (strncmp
+ (template_string, string_to_compare, strlen (string_to_compare)) == 0);
else
match = 0;
return match;
"Set number of characters gdb thinks are in a line.",
&setlist);
add_show_from_set (c, &showlist);
- c->function.sfunc = set_width_command;
+ set_cmd_sfunc (c, set_width_command);
add_show_from_set
(add_set_cmd ("height", class_support,
add_show_from_set
(add_set_cmd ("demangle", class_support, var_boolean,
(char *) &demangle,
- "Set demangling of encoded C++ names when displaying symbols.",
- &setprintlist),
- &showprintlist);
+ "Set demangling of encoded C++/ObjC names when displaying symbols.",
+ &setprintlist), &showprintlist);
add_show_from_set
(add_set_cmd ("pagination", class_support,
var_boolean, (char *) &pagination_enabled,
- "Set state of pagination.", &setlist),
- &showlist);
+ "Set state of pagination.", &setlist), &showlist);
if (xdb_commands)
{
(add_set_cmd ("sevenbit-strings", class_support, var_boolean,
(char *) &sevenbit_strings,
"Set printing of 8-bit characters in strings as \\nnn.",
- &setprintlist),
- &showprintlist);
+ &setprintlist), &showprintlist);
add_show_from_set
(add_set_cmd ("asm-demangle", class_support, var_boolean,
(char *) &asm_demangle,
- "Set demangling of C++ names in disassembly listings.",
- &setprintlist),
- &showprintlist);
+ "Set demangling of C++/ObjC names in disassembly listings.",
+ &setprintlist), &showprintlist);
}
/* Machine specific function to handle SIGWINCH signal. */
#ifdef SIGWINCH_HANDLER_BODY
SIGWINCH_HANDLER_BODY
#endif
-\f
-/* Support for converting target fp numbers into host DOUBLEST format. */
-
-/* XXX - This code should really be in libiberty/floatformat.c, however
- configuration issues with libiberty made this very difficult to do in the
- available time. */
-
-#include "floatformat.h"
-#include <math.h> /* ldexp */
-
-/* The odds that CHAR_BIT will be anything but 8 are low enough that I'm not
- going to bother with trying to muck around with whether it is defined in
- a system header, what we do if not, etc. */
-#define FLOATFORMAT_CHAR_BIT 8
-
-static unsigned long get_field (unsigned char *,
- enum floatformat_byteorders,
- unsigned int, unsigned int, unsigned int);
-
-/* Extract a field which starts at START and is LEN bytes long. DATA and
- TOTAL_LEN are the thing we are extracting it from, in byteorder ORDER. */
-static unsigned long
-get_field (unsigned char *data, enum floatformat_byteorders order,
- unsigned int total_len, unsigned int start, unsigned int len)
-{
- unsigned long result;
- unsigned int cur_byte;
- int cur_bitshift;
-
- /* Start at the least significant part of the field. */
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- {
- /* We start counting from the other end (i.e, from the high bytes
- rather than the low bytes). As such, we need to be concerned
- with what happens if bit 0 doesn't start on a byte boundary.
- I.e, we need to properly handle the case where total_len is
- not evenly divisible by 8. So we compute ``excess'' which
- represents the number of bits from the end of our starting
- byte needed to get to bit 0. */
- int excess = FLOATFORMAT_CHAR_BIT - (total_len % FLOATFORMAT_CHAR_BIT);
- cur_byte = (total_len / FLOATFORMAT_CHAR_BIT)
- - ((start + len + excess) / FLOATFORMAT_CHAR_BIT);
- cur_bitshift = ((start + len + excess) % FLOATFORMAT_CHAR_BIT)
- - FLOATFORMAT_CHAR_BIT;
- }
- else
- {
- cur_byte = (start + len) / FLOATFORMAT_CHAR_BIT;
- cur_bitshift =
- ((start + len) % FLOATFORMAT_CHAR_BIT) - FLOATFORMAT_CHAR_BIT;
- }
- if (cur_bitshift > -FLOATFORMAT_CHAR_BIT)
- result = *(data + cur_byte) >> (-cur_bitshift);
- else
- result = 0;
- cur_bitshift += FLOATFORMAT_CHAR_BIT;
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- ++cur_byte;
- else
- --cur_byte;
-
- /* Move towards the most significant part of the field. */
- while (cur_bitshift < len)
- {
- result |= (unsigned long)*(data + cur_byte) << cur_bitshift;
- cur_bitshift += FLOATFORMAT_CHAR_BIT;
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- ++cur_byte;
- else
- --cur_byte;
- }
- if (len < sizeof(result) * FLOATFORMAT_CHAR_BIT)
- /* Mask out bits which are not part of the field */
- result &= ((1UL << len) - 1);
- return result;
-}
-
-/* Convert from FMT to a DOUBLEST.
- FROM is the address of the extended float.
- Store the DOUBLEST in *TO. */
-
-void
-floatformat_to_doublest (const struct floatformat *fmt, char *from,
- DOUBLEST *to)
-{
- unsigned char *ufrom = (unsigned char *) from;
- DOUBLEST dto;
- long exponent;
- unsigned long mant;
- unsigned int mant_bits, mant_off;
- int mant_bits_left;
- int special_exponent; /* It's a NaN, denorm or zero */
-
- /* If the mantissa bits are not contiguous from one end of the
- mantissa to the other, we need to make a private copy of the
- source bytes that is in the right order since the unpacking
- algorithm assumes that the bits are contiguous.
-
- Swap the bytes individually rather than accessing them through
- "long *" since we have no guarantee that they start on a long
- alignment, and also sizeof(long) for the host could be different
- than sizeof(long) for the target. FIXME: Assumes sizeof(long)
- for the target is 4. */
-
- if (fmt->byteorder == floatformat_littlebyte_bigword)
- {
- static unsigned char *newfrom;
- unsigned char *swapin, *swapout;
- int longswaps;
-
- longswaps = fmt->totalsize / FLOATFORMAT_CHAR_BIT;
- longswaps >>= 3;
-
- if (newfrom == NULL)
- {
- newfrom = (unsigned char *) xmalloc (fmt->totalsize);
- }
- swapout = newfrom;
- swapin = ufrom;
- ufrom = newfrom;
- while (longswaps-- > 0)
- {
- /* This is ugly, but efficient */
- *swapout++ = swapin[4];
- *swapout++ = swapin[5];
- *swapout++ = swapin[6];
- *swapout++ = swapin[7];
- *swapout++ = swapin[0];
- *swapout++ = swapin[1];
- *swapout++ = swapin[2];
- *swapout++ = swapin[3];
- swapin += 8;
- }
- }
-
- exponent = get_field (ufrom, fmt->byteorder, fmt->totalsize,
- fmt->exp_start, fmt->exp_len);
- /* Note that if exponent indicates a NaN, we can't really do anything useful
- (not knowing if the host has NaN's, or how to build one). So it will
- end up as an infinity or something close; that is OK. */
-
- mant_bits_left = fmt->man_len;
- mant_off = fmt->man_start;
- dto = 0.0;
-
- special_exponent = exponent == 0 || exponent == fmt->exp_nan;
-
-/* Don't bias NaNs. Use minimum exponent for denorms. For simplicity,
- we don't check for zero as the exponent doesn't matter. */
- if (!special_exponent)
- exponent -= fmt->exp_bias;
- else if (exponent == 0)
- exponent = 1 - fmt->exp_bias;
-
- /* Build the result algebraically. Might go infinite, underflow, etc;
- who cares. */
-
-/* If this format uses a hidden bit, explicitly add it in now. Otherwise,
- increment the exponent by one to account for the integer bit. */
-
- if (!special_exponent)
- {
- if (fmt->intbit == floatformat_intbit_no)
- dto = ldexp (1.0, exponent);
- else
- exponent++;
- }
-
- while (mant_bits_left > 0)
- {
- mant_bits = min (mant_bits_left, 32);
-
- mant = get_field (ufrom, fmt->byteorder, fmt->totalsize,
- mant_off, mant_bits);
-
- dto += ldexp ((double) mant, exponent - mant_bits);
- exponent -= mant_bits;
- mant_off += mant_bits;
- mant_bits_left -= mant_bits;
- }
-
- /* Negate it if negative. */
- if (get_field (ufrom, fmt->byteorder, fmt->totalsize, fmt->sign_start, 1))
- dto = -dto;
- *to = dto;
-}
-\f
-static void put_field (unsigned char *, enum floatformat_byteorders,
- unsigned int,
- unsigned int, unsigned int, unsigned long);
-
-/* Set a field which starts at START and is LEN bytes long. DATA and
- TOTAL_LEN are the thing we are extracting it from, in byteorder ORDER. */
-static void
-put_field (unsigned char *data, enum floatformat_byteorders order,
- unsigned int total_len, unsigned int start, unsigned int len,
- unsigned long stuff_to_put)
-{
- unsigned int cur_byte;
- int cur_bitshift;
-
- /* Start at the least significant part of the field. */
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- {
- int excess = FLOATFORMAT_CHAR_BIT - (total_len % FLOATFORMAT_CHAR_BIT);
- cur_byte = (total_len / FLOATFORMAT_CHAR_BIT)
- - ((start + len + excess) / FLOATFORMAT_CHAR_BIT);
- cur_bitshift = ((start + len + excess) % FLOATFORMAT_CHAR_BIT)
- - FLOATFORMAT_CHAR_BIT;
- }
- else
- {
- cur_byte = (start + len) / FLOATFORMAT_CHAR_BIT;
- cur_bitshift =
- ((start + len) % FLOATFORMAT_CHAR_BIT) - FLOATFORMAT_CHAR_BIT;
- }
- if (cur_bitshift > -FLOATFORMAT_CHAR_BIT)
- {
- *(data + cur_byte) &=
- ~(((1 << ((start + len) % FLOATFORMAT_CHAR_BIT)) - 1)
- << (-cur_bitshift));
- *(data + cur_byte) |=
- (stuff_to_put & ((1 << FLOATFORMAT_CHAR_BIT) - 1)) << (-cur_bitshift);
- }
- cur_bitshift += FLOATFORMAT_CHAR_BIT;
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- ++cur_byte;
- else
- --cur_byte;
-
- /* Move towards the most significant part of the field. */
- while (cur_bitshift < len)
- {
- if (len - cur_bitshift < FLOATFORMAT_CHAR_BIT)
- {
- /* This is the last byte. */
- *(data + cur_byte) &=
- ~((1 << (len - cur_bitshift)) - 1);
- *(data + cur_byte) |= (stuff_to_put >> cur_bitshift);
- }
- else
- *(data + cur_byte) = ((stuff_to_put >> cur_bitshift)
- & ((1 << FLOATFORMAT_CHAR_BIT) - 1));
- cur_bitshift += FLOATFORMAT_CHAR_BIT;
- if (order == floatformat_little || order == floatformat_littlebyte_bigword)
- ++cur_byte;
- else
- --cur_byte;
- }
-}
-
-#ifdef HAVE_LONG_DOUBLE
-/* Return the fractional part of VALUE, and put the exponent of VALUE in *EPTR.
- The range of the returned value is >= 0.5 and < 1.0. This is equivalent to
- frexp, but operates on the long double data type. */
-
-static long double ldfrexp (long double value, int *eptr);
-
-static long double
-ldfrexp (long double value, int *eptr)
-{
- long double tmp;
- int exp;
-
- /* Unfortunately, there are no portable functions for extracting the exponent
- of a long double, so we have to do it iteratively by multiplying or dividing
- by two until the fraction is between 0.5 and 1.0. */
-
- if (value < 0.0l)
- value = -value;
-
- tmp = 1.0l;
- exp = 0;
-
- if (value >= tmp) /* Value >= 1.0 */
- while (value >= tmp)
- {
- tmp *= 2.0l;
- exp++;
- }
- else if (value != 0.0l) /* Value < 1.0 and > 0.0 */
- {
- while (value < tmp)
- {
- tmp /= 2.0l;
- exp--;
- }
- tmp *= 2.0l;
- exp++;
- }
-
- *eptr = exp;
- return value / tmp;
-}
-#endif /* HAVE_LONG_DOUBLE */
-
-
-/* The converse: convert the DOUBLEST *FROM to an extended float
- and store where TO points. Neither FROM nor TO have any alignment
- restrictions. */
-
-void
-floatformat_from_doublest (CONST struct floatformat *fmt, DOUBLEST *from,
- char *to)
-{
- DOUBLEST dfrom;
- int exponent;
- DOUBLEST mant;
- unsigned int mant_bits, mant_off;
- int mant_bits_left;
- unsigned char *uto = (unsigned char *) to;
-
- memcpy (&dfrom, from, sizeof (dfrom));
- memset (uto, 0, (fmt->totalsize + FLOATFORMAT_CHAR_BIT - 1)
- / FLOATFORMAT_CHAR_BIT);
- if (dfrom == 0)
- return; /* Result is zero */
- if (dfrom != dfrom) /* Result is NaN */
- {
- /* From is NaN */
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->exp_start,
- fmt->exp_len, fmt->exp_nan);
- /* Be sure it's not infinity, but NaN value is irrel */
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->man_start,
- 32, 1);
- return;
- }
-
- /* If negative, set the sign bit. */
- if (dfrom < 0)
- {
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->sign_start, 1, 1);
- dfrom = -dfrom;
- }
-
- if (dfrom + dfrom == dfrom && dfrom != 0.0) /* Result is Infinity */
- {
- /* Infinity exponent is same as NaN's. */
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->exp_start,
- fmt->exp_len, fmt->exp_nan);
- /* Infinity mantissa is all zeroes. */
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->man_start,
- fmt->man_len, 0);
- return;
- }
-
-#ifdef HAVE_LONG_DOUBLE
- mant = ldfrexp (dfrom, &exponent);
-#else
- mant = frexp (dfrom, &exponent);
-#endif
-
- put_field (uto, fmt->byteorder, fmt->totalsize, fmt->exp_start, fmt->exp_len,
- exponent + fmt->exp_bias - 1);
-
- mant_bits_left = fmt->man_len;
- mant_off = fmt->man_start;
- while (mant_bits_left > 0)
- {
- unsigned long mant_long;
- mant_bits = mant_bits_left < 32 ? mant_bits_left : 32;
-
- mant *= 4294967296.0;
- mant_long = ((unsigned long) mant) & 0xffffffffL;
- mant -= mant_long;
-
- /* If the integer bit is implicit, then we need to discard it.
- If we are discarding a zero, we should be (but are not) creating
- a denormalized number which means adjusting the exponent
- (I think). */
- if (mant_bits_left == fmt->man_len
- && fmt->intbit == floatformat_intbit_no)
- {
- mant_long <<= 1;
- mant_long &= 0xffffffffL;
- mant_bits -= 1;
- }
-
- if (mant_bits < 32)
- {
- /* The bits we want are in the most significant MANT_BITS bits of
- mant_long. Move them to the least significant. */
- mant_long >>= 32 - mant_bits;
- }
-
- put_field (uto, fmt->byteorder, fmt->totalsize,
- mant_off, mant_bits, mant_long);
- mant_off += mant_bits;
- mant_bits_left -= mant_bits;
- }
- if (fmt->byteorder == floatformat_littlebyte_bigword)
- {
- int count;
- unsigned char *swaplow = uto;
- unsigned char *swaphigh = uto + 4;
- unsigned char tmp;
-
- for (count = 0; count < 4; count++)
- {
- tmp = *swaplow;
- *swaplow++ = *swaphigh;
- *swaphigh++ = tmp;
- }
- }
-}
-
-/* Check if VAL (which is assumed to be a floating point number whose
- format is described by FMT) is negative. */
-
-int
-floatformat_is_negative (const struct floatformat *fmt, char *val)
-{
- unsigned char *uval = (unsigned char *) val;
-
- return get_field (uval, fmt->byteorder, fmt->totalsize, fmt->sign_start, 1);
-}
-
-/* Check if VAL is "not a number" (NaN) for FMT. */
-
-int
-floatformat_is_nan (const struct floatformat *fmt, char *val)
-{
- unsigned char *uval = (unsigned char *) val;
- long exponent;
- unsigned long mant;
- unsigned int mant_bits, mant_off;
- int mant_bits_left;
-
- if (! fmt->exp_nan)
- return 0;
-
- exponent = get_field (uval, fmt->byteorder, fmt->totalsize,
- fmt->exp_start, fmt->exp_len);
-
- if (exponent != fmt->exp_nan)
- return 0;
-
- mant_bits_left = fmt->man_len;
- mant_off = fmt->man_start;
-
- while (mant_bits_left > 0)
- {
- mant_bits = min (mant_bits_left, 32);
-
- mant = get_field (uval, fmt->byteorder, fmt->totalsize,
- mant_off, mant_bits);
-
- /* If there is an explicit integer bit, mask it off. */
- if (mant_off == fmt->man_start
- && fmt->intbit == floatformat_intbit_yes)
- mant &= ~(1 << (mant_bits - 1));
-
- if (mant)
- return 1;
-
- mant_off += mant_bits;
- mant_bits_left -= mant_bits;
- }
-
- return 0;
-}
-
-/* Convert the mantissa of VAL (which is assumed to be a floating
- point number whose format is described by FMT) into a hexadecimal
- and store it in a static string. Return a pointer to that string. */
-
-char *
-floatformat_mantissa (const struct floatformat *fmt, char *val)
-{
- unsigned char *uval = (unsigned char *) val;
- unsigned long mant;
- unsigned int mant_bits, mant_off;
- int mant_bits_left;
- static char res[50];
- char buf[9];
-
- /* Make sure we have enough room to store the mantissa. */
- gdb_assert (sizeof res > ((fmt->man_len + 7) / 8) * 2);
-
- mant_off = fmt->man_start;
- mant_bits_left = fmt->man_len;
- mant_bits = (mant_bits_left % 32) > 0 ? mant_bits_left % 32 : 32;
-
- mant = get_field (uval, fmt->byteorder, fmt->totalsize,
- mant_off, mant_bits);
-
- sprintf (res, "%lx", mant);
-
- mant_off += mant_bits;
- mant_bits_left -= mant_bits;
-
- while (mant_bits_left > 0)
- {
- mant = get_field (uval, fmt->byteorder, fmt->totalsize,
- mant_off, 32);
-
- sprintf (buf, "%08lx", mant);
- strcat (res, buf);
-
- mant_off += 32;
- mant_bits_left -= 32;
- }
-
- return res;
-}
-
/* print routines to handle variable size regs, etc. */
-
/* temporary storage using circular buffer */
#define NUMCELLS 16
#define CELLSIZE 32
switch (i)
{
case 1:
- sprintf (paddr_str, "%s%lu",
- sign, temp[0]);
+ sprintf (paddr_str, "%s%lu", sign, temp[0]);
break;
case 2:
- sprintf (paddr_str, "%s%lu%09lu",
- sign, temp[1], temp[0]);
+ sprintf (paddr_str, "%s%lu%09lu", sign, temp[1], temp[0]);
break;
case 3:
- sprintf (paddr_str, "%s%lu%09lu%09lu",
- sign, temp[2], temp[1], temp[0]);
+ sprintf (paddr_str, "%s%lu%09lu%09lu", sign, temp[2], temp[1], temp[0]);
break;
default:
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
+ internal_error (__FILE__, __LINE__,
+ "failed internal consistency check");
}
}
char *
phex (ULONGEST l, int sizeof_l)
{
- char *str = get_cell ();
+ char *str;
switch (sizeof_l)
{
case 8:
+ str = get_cell ();
sprintf (str, "%08lx%08lx",
(unsigned long) (l >> thirty_two),
(unsigned long) (l & 0xffffffff));
break;
case 4:
+ str = get_cell ();
sprintf (str, "%08lx", (unsigned long) l);
break;
case 2:
+ str = get_cell ();
sprintf (str, "%04x", (unsigned short) (l & 0xffff));
break;
default:
- phex (l, sizeof (l));
+ str = phex (l, sizeof (l));
break;
}
return str;
char *
phex_nz (ULONGEST l, int sizeof_l)
{
- char *str = get_cell ();
+ char *str;
switch (sizeof_l)
{
case 8:
{
unsigned long high = (unsigned long) (l >> thirty_two);
+ str = get_cell ();
if (high == 0)
sprintf (str, "%lx", (unsigned long) (l & 0xffffffff));
else
- sprintf (str, "%lx%08lx",
- high, (unsigned long) (l & 0xffffffff));
+ sprintf (str, "%lx%08lx", high, (unsigned long) (l & 0xffffffff));
break;
}
case 4:
+ str = get_cell ();
sprintf (str, "%lx", (unsigned long) l);
break;
case 2:
+ str = get_cell ();
sprintf (str, "%x", (unsigned short) (l & 0xffff));
break;
default:
- phex_nz (l, sizeof (l));
+ str = phex_nz (l, sizeof (l));
break;
}
return str;
}
-/* Convert to / from the hosts pointer to GDB's internal CORE_ADDR
- using the target's conversion routines. */
+/* Convert a CORE_ADDR into a string. */
+const char *
+core_addr_to_string (const CORE_ADDR addr)
+{
+ char *str = get_cell ();
+ strcpy (str, "0x");
+ strcat (str, phex (addr, sizeof (addr)));
+ return str;
+}
+
+const char *
+core_addr_to_string_nz (const CORE_ADDR addr)
+{
+ char *str = get_cell ();
+ strcpy (str, "0x");
+ strcat (str, phex_nz (addr, sizeof (addr)));
+ return str;
+}
+
+/* Convert a string back into a CORE_ADDR. */
CORE_ADDR
-host_pointer_to_address (void *ptr)
+string_to_core_addr (const char *my_string)
{
- if (sizeof (ptr) != TYPE_LENGTH (builtin_type_ptr))
- internal_error (__FILE__, __LINE__,
- "core_addr_to_void_ptr: bad cast");
- return POINTER_TO_ADDRESS (builtin_type_ptr, &ptr);
+ CORE_ADDR addr = 0;
+ if (my_string[0] == '0' && tolower (my_string[1]) == 'x')
+ {
+ /* Assume that it is in decimal. */
+ int i;
+ for (i = 2; my_string[i] != '\0'; i++)
+ {
+ if (isdigit (my_string[i]))
+ addr = (my_string[i] - '0') + (addr * 16);
+ else if (isxdigit (my_string[i]))
+ addr = (tolower (my_string[i]) - 'a' + 0xa) + (addr * 16);
+ else
+ internal_error (__FILE__, __LINE__, "invalid hex");
+ }
+ }
+ else
+ {
+ /* Assume that it is in decimal. */
+ int i;
+ for (i = 0; my_string[i] != '\0'; i++)
+ {
+ if (isdigit (my_string[i]))
+ addr = (my_string[i] - '0') + (addr * 10);
+ else
+ internal_error (__FILE__, __LINE__, "invalid decimal");
+ }
+ }
+ return addr;
}
-void *
-address_to_host_pointer (CORE_ADDR addr)
+char *
+gdb_realpath (const char *filename)
+{
+ /* Method 1: The system has a compile time upper bound on a filename
+ path. Use that and realpath() to canonicalize the name. This is
+ the most common case. Note that, if there isn't a compile time
+ upper bound, you want to avoid realpath() at all costs. */
+#if defined(HAVE_REALPATH)
+ {
+# if defined (PATH_MAX)
+ char buf[PATH_MAX];
+# define USE_REALPATH
+# elif defined (MAXPATHLEN)
+ char buf[MAXPATHLEN];
+# define USE_REALPATH
+# endif
+# if defined (USE_REALPATH)
+ const char *rp = realpath (filename, buf);
+ if (rp == NULL)
+ rp = filename;
+ return xstrdup (rp);
+# endif
+ }
+#endif /* HAVE_REALPATH */
+
+ /* Method 2: The host system (i.e., GNU) has the function
+ canonicalize_file_name() which malloc's a chunk of memory and
+ returns that, use that. */
+#if defined(HAVE_CANONICALIZE_FILE_NAME)
+ {
+ char *rp = canonicalize_file_name (filename);
+ if (rp == NULL)
+ return xstrdup (filename);
+ else
+ return rp;
+ }
+#endif
+
+ /* FIXME: cagney/2002-11-13:
+
+ Method 2a: Use realpath() with a NULL buffer. Some systems, due
+ to the problems described in in method 3, have modified their
+ realpath() implementation so that it will allocate a buffer when
+ NULL is passed in. Before this can be used, though, some sort of
+ configure time test would need to be added. Otherwize the code
+ will likely core dump. */
+
+ /* Method 3: Now we're getting desperate! The system doesn't have a
+ compile time buffer size and no alternative function. Query the
+ OS, using pathconf(), for the buffer limit. Care is needed
+ though, some systems do not limit PATH_MAX (return -1 for
+ pathconf()) making it impossible to pass a correctly sized buffer
+ to realpath() (it could always overflow). On those systems, we
+ skip this. */
+#if defined (HAVE_REALPATH) && defined (HAVE_UNISTD_H) && defined(HAVE_ALLOCA)
+ {
+ /* Find out the max path size. */
+ long path_max = pathconf ("/", _PC_PATH_MAX);
+ if (path_max > 0)
+ {
+ /* PATH_MAX is bounded. */
+ char *buf = alloca (path_max);
+ char *rp = realpath (filename, buf);
+ return xstrdup (rp ? rp : filename);
+ }
+ }
+#endif
+
+ /* This system is a lost cause, just dup the buffer. */
+ return xstrdup (filename);
+}
+
+/* Return a copy of FILENAME, with its directory prefix canonicalized
+ by gdb_realpath. */
+
+char *
+xfullpath (const char *filename)
{
- void *ptr;
- if (sizeof (ptr) != TYPE_LENGTH (builtin_type_ptr))
- internal_error (__FILE__, __LINE__,
- "core_addr_to_void_ptr: bad cast");
- ADDRESS_TO_POINTER (builtin_type_ptr, &ptr, addr);
- return ptr;
+ const char *base_name = lbasename (filename);
+ char *dir_name;
+ char *real_path;
+ char *result;
+
+ /* Extract the basename of filename, and return immediately
+ a copy of filename if it does not contain any directory prefix. */
+ if (base_name == filename)
+ return xstrdup (filename);
+
+ dir_name = alloca ((size_t) (base_name - filename + 2));
+ /* Allocate enough space to store the dir_name + plus one extra
+ character sometimes needed under Windows (see below), and
+ then the closing \000 character */
+ strncpy (dir_name, filename, base_name - filename);
+ dir_name[base_name - filename] = '\000';
+
+#ifdef HAVE_DOS_BASED_FILE_SYSTEM
+ /* We need to be careful when filename is of the form 'd:foo', which
+ is equivalent of d:./foo, which is totally different from d:/foo. */
+ if (strlen (dir_name) == 2 && isalpha (dir_name[0]) && dir_name[1] == ':')
+ {
+ dir_name[2] = '.';
+ dir_name[3] = '\000';
+ }
+#endif
+
+ /* Canonicalize the directory prefix, and build the resulting
+ filename. If the dirname realpath already contains an ending
+ directory separator, avoid doubling it. */
+ real_path = gdb_realpath (dir_name);
+ if (IS_DIR_SEPARATOR (real_path[strlen (real_path) - 1]))
+ result = concat (real_path, base_name, NULL);
+ else
+ result = concat (real_path, SLASH_STRING, base_name, NULL);
+
+ xfree (real_path);
+ return result;
+}
+
+
+/* This is the 32-bit CRC function used by the GNU separate debug
+ facility. An executable may contain a section named
+ .gnu_debuglink, which holds the name of a separate executable file
+ containing its debug info, and a checksum of that file's contents,
+ computed using this function. */
+unsigned long
+gnu_debuglink_crc32 (unsigned long crc, unsigned char *buf, size_t len)
+{
+ static const unsigned long crc32_table[256] = {
+ 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419,
+ 0x706af48f, 0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4,
+ 0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07,
+ 0x90bf1d91, 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de,
+ 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, 0x136c9856,
+ 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9,
+ 0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4,
+ 0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
+ 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3,
+ 0x45df5c75, 0xdcd60dcf, 0xabd13d59, 0x26d930ac, 0x51de003a,
+ 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599,
+ 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
+ 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190,
+ 0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f,
+ 0x9fbfe4a5, 0xe8b8d433, 0x7807c9a2, 0x0f00f934, 0x9609a88e,
+ 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
+ 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed,
+ 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950,
+ 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3,
+ 0xfbd44c65, 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2,
+ 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a,
+ 0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5,
+ 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa, 0xbe0b1010,
+ 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
+ 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17,
+ 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6,
+ 0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615,
+ 0x73dc1683, 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8,
+ 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, 0xf00f9344,
+ 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb,
+ 0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a,
+ 0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
+ 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1,
+ 0xa6bc5767, 0x3fb506dd, 0x48b2364b, 0xd80d2bda, 0xaf0a1b4c,
+ 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef,
+ 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
+ 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe,
+ 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31,
+ 0x2cd99e8b, 0x5bdeae1d, 0x9b64c2b0, 0xec63f226, 0x756aa39c,
+ 0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
+ 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b,
+ 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242,
+ 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1,
+ 0x18b74777, 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c,
+ 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, 0xa00ae278,
+ 0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7,
+ 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc, 0x40df0b66,
+ 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
+ 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605,
+ 0xcdd70693, 0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8,
+ 0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b,
+ 0x2d02ef8d
+ };
+ unsigned char *end;
+
+ crc = ~crc & 0xffffffff;
+ for (end = buf + len; buf < end; ++buf)
+ crc = crc32_table[(crc ^ *buf) & 0xff] ^ (crc >> 8);
+ return ~crc & 0xffffffff;;
}
projects / deliverable / binutils-gdb.git / blobdiff