/* Target-dependent code for the NEC V850 for GDB, the GNU debugger.
- Copyright 1996, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
+
+ Copyright (C) 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free
+ Software Foundation, Inc.
This file is part of GDB.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
#include "defs.h"
#include "frame.h"
+#include "frame-base.h"
+#include "trad-frame.h"
+#include "frame-unwind.h"
+#include "dwarf2-frame.h"
+#include "gdbtypes.h"
#include "inferior.h"
-#include "obstack.h"
-#include "target.h"
-#include "value.h"
-#include "bfd.h"
#include "gdb_string.h"
+#include "gdb_assert.h"
#include "gdbcore.h"
-#include "symfile.h"
#include "arch-utils.h"
#include "regcache.h"
+#include "dis-asm.h"
+#include "osabi.h"
+enum
+ {
+ E_R0_REGNUM,
+ E_R1_REGNUM,
+ E_R2_REGNUM,
+ E_R3_REGNUM, E_SP_REGNUM = E_R3_REGNUM,
+ E_R4_REGNUM,
+ E_R5_REGNUM,
+ E_R6_REGNUM, E_ARG0_REGNUM = E_R6_REGNUM,
+ E_R7_REGNUM,
+ E_R8_REGNUM,
+ E_R9_REGNUM, E_ARGLAST_REGNUM = E_R9_REGNUM,
+ E_R10_REGNUM, E_V0_REGNUM = E_R10_REGNUM,
+ E_R11_REGNUM, E_V1_REGNUM = E_R11_REGNUM,
+ E_R12_REGNUM,
+ E_R13_REGNUM,
+ E_R14_REGNUM,
+ E_R15_REGNUM,
+ E_R16_REGNUM,
+ E_R17_REGNUM,
+ E_R18_REGNUM,
+ E_R19_REGNUM,
+ E_R20_REGNUM,
+ E_R21_REGNUM,
+ E_R22_REGNUM,
+ E_R23_REGNUM,
+ E_R24_REGNUM,
+ E_R25_REGNUM,
+ E_R26_REGNUM,
+ E_R27_REGNUM,
+ E_R28_REGNUM,
+ E_R29_REGNUM, E_FP_REGNUM = E_R29_REGNUM,
+ E_R30_REGNUM, E_EP_REGNUM = E_R30_REGNUM,
+ E_R31_REGNUM, E_LP_REGNUM = E_R31_REGNUM,
+ E_R32_REGNUM, E_SR0_REGNUM = E_R32_REGNUM,
+ E_R33_REGNUM,
+ E_R34_REGNUM,
+ E_R35_REGNUM,
+ E_R36_REGNUM,
+ E_R37_REGNUM, E_PS_REGNUM = E_R37_REGNUM,
+ E_R38_REGNUM,
+ E_R39_REGNUM,
+ E_R40_REGNUM,
+ E_R41_REGNUM,
+ E_R42_REGNUM,
+ E_R43_REGNUM,
+ E_R44_REGNUM,
+ E_R45_REGNUM,
+ E_R46_REGNUM,
+ E_R47_REGNUM,
+ E_R48_REGNUM,
+ E_R49_REGNUM,
+ E_R50_REGNUM,
+ E_R51_REGNUM,
+ E_R52_REGNUM, E_CTBP_REGNUM = E_R52_REGNUM,
+ E_R53_REGNUM,
+ E_R54_REGNUM,
+ E_R55_REGNUM,
+ E_R56_REGNUM,
+ E_R57_REGNUM,
+ E_R58_REGNUM,
+ E_R59_REGNUM,
+ E_R60_REGNUM,
+ E_R61_REGNUM,
+ E_R62_REGNUM,
+ E_R63_REGNUM,
+ E_R64_REGNUM, E_PC_REGNUM = E_R64_REGNUM,
+ E_R65_REGNUM,
+ E_NUM_REGS
+ };
-static char *v850_generic_reg_names[] = REGISTER_NAMES;
-
-static char *v850e_reg_names[] =
+enum
{
- "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
- "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
- "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
- "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
- "eipc", "eipsw", "fepc", "fepsw", "ecr", "psw", "sr6", "sr7",
- "sr8", "sr9", "sr10", "sr11", "sr12", "sr13", "sr14", "sr15",
- "ctpc", "ctpsw", "dbpc", "dbpsw", "ctbp", "sr21", "sr22", "sr23",
- "sr24", "sr25", "sr26", "sr27", "sr28", "sr29", "sr30", "sr31",
- "pc", "fp"
+ v850_reg_size = 4
};
-char **v850_register_names = v850_generic_reg_names;
-
-struct
- {
- char **regnames;
- int mach;
- }
-v850_processor_type_table[] =
+/* Size of return datatype which fits into all return registers. */
+enum
{
- {
- v850_generic_reg_names, bfd_mach_v850
- }
- ,
- {
- v850e_reg_names, bfd_mach_v850e
- }
- ,
- {
- v850e_reg_names, bfd_mach_v850ea
- }
- ,
- {
- NULL, 0
- }
+ E_MAX_RETTYPE_SIZE_IN_REGS = 2 * v850_reg_size
+};
+
+struct v850_frame_cache
+{
+ /* Base address. */
+ CORE_ADDR base;
+ LONGEST sp_offset;
+ CORE_ADDR pc;
+
+ /* Flag showing that a frame has been created in the prologue code. */
+ int uses_fp;
+
+ /* Saved registers. */
+ struct trad_frame_saved_reg *saved_regs;
};
/* Info gleaned from scanning a function's prologue. */
+struct pifsr /* Info about one saved register. */
+{
+ int offset; /* Offset from sp or fp. */
+ int cur_frameoffset; /* Current frameoffset. */
+ int reg; /* Saved register number. */
+};
-struct pifsr /* Info about one saved reg */
- {
- int framereg; /* Frame reg (SP or FP) */
- int offset; /* Offset from framereg */
- int cur_frameoffset; /* Current frameoffset */
- int reg; /* Saved register number */
+static const char *
+v850_register_name (int regnum)
+{
+ static const char *v850_reg_names[] =
+ { "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+ "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
+ "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
+ "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
+ "eipc", "eipsw", "fepc", "fepsw", "ecr", "psw", "sr6", "sr7",
+ "sr8", "sr9", "sr10", "sr11", "sr12", "sr13", "sr14", "sr15",
+ "sr16", "sr17", "sr18", "sr19", "sr20", "sr21", "sr22", "sr23",
+ "sr24", "sr25", "sr26", "sr27", "sr28", "sr29", "sr30", "sr31",
+ "pc", "fp"
};
+ if (regnum < 0 || regnum >= E_NUM_REGS)
+ return NULL;
+ return v850_reg_names[regnum];
+}
-struct prologue_info
+static const char *
+v850e_register_name (int regnum)
+{
+ static const char *v850e_reg_names[] =
{
- int framereg;
- int frameoffset;
- int start_function;
- struct pifsr *pifsrs;
+ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+ "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
+ "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
+ "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
+ "eipc", "eipsw", "fepc", "fepsw", "ecr", "psw", "sr6", "sr7",
+ "sr8", "sr9", "sr10", "sr11", "sr12", "sr13", "sr14", "sr15",
+ "ctpc", "ctpsw", "dbpc", "dbpsw", "ctbp", "sr21", "sr22", "sr23",
+ "sr24", "sr25", "sr26", "sr27", "sr28", "sr29", "sr30", "sr31",
+ "pc", "fp"
};
+ if (regnum < 0 || regnum >= E_NUM_REGS)
+ return NULL;
+ return v850e_reg_names[regnum];
+}
-static CORE_ADDR v850_scan_prologue (CORE_ADDR pc, struct prologue_info *fs);
+/* Returns the default type for register N. */
+static struct type *
+v850_register_type (struct gdbarch *gdbarch, int regnum)
+{
+ if (regnum == E_PC_REGNUM)
+ return builtin_type_void_func_ptr;
+ return builtin_type_int32;
+}
-/* Should call_function allocate stack space for a struct return? */
-int
-v850_use_struct_convention (int gcc_p, struct type *type)
+static int
+v850_type_is_scalar (struct type *t)
{
- return (TYPE_NFIELDS (type) > 1 || TYPE_LENGTH (type) > 4);
+ return (TYPE_CODE (t) != TYPE_CODE_STRUCT
+ && TYPE_CODE (t) != TYPE_CODE_UNION
+ && TYPE_CODE (t) != TYPE_CODE_ARRAY);
}
-\f
+/* Should call_function allocate stack space for a struct return? */
+static int
+v850_use_struct_convention (struct type *type)
+{
+ int i;
+ struct type *fld_type, *tgt_type;
+
+ /* 1. The value is greater than 8 bytes -> returned by copying. */
+ if (TYPE_LENGTH (type) > 8)
+ return 1;
+
+ /* 2. The value is a single basic type -> returned in register. */
+ if (v850_type_is_scalar (type))
+ return 0;
+
+ /* The value is a structure or union with a single element and that
+ element is either a single basic type or an array of a single basic
+ type whose size is greater than or equal to 4 -> returned in register. */
+ if ((TYPE_CODE (type) == TYPE_CODE_STRUCT
+ || TYPE_CODE (type) == TYPE_CODE_UNION)
+ && TYPE_NFIELDS (type) == 1)
+ {
+ fld_type = TYPE_FIELD_TYPE (type, 0);
+ if (v850_type_is_scalar (fld_type) && TYPE_LENGTH (fld_type) >= 4)
+ return 0;
+
+ if (TYPE_CODE (fld_type) == TYPE_CODE_ARRAY)
+ {
+ tgt_type = TYPE_TARGET_TYPE (fld_type);
+ if (v850_type_is_scalar (tgt_type) && TYPE_LENGTH (tgt_type) >= 4)
+ return 0;
+ }
+ }
-/* Structure for mapping bits in register lists to register numbers. */
+ /* The value is a structure whose first element is an integer or a float,
+ and which contains no arrays of more than two elements -> returned in
+ register. */
+ if (TYPE_CODE (type) == TYPE_CODE_STRUCT
+ && v850_type_is_scalar (TYPE_FIELD_TYPE (type, 0))
+ && TYPE_LENGTH (TYPE_FIELD_TYPE (type, 0)) == 4)
+ {
+ for (i = 1; i < TYPE_NFIELDS (type); ++i)
+ {
+ fld_type = TYPE_FIELD_TYPE (type, 0);
+ if (TYPE_CODE (fld_type) == TYPE_CODE_ARRAY)
+ {
+ tgt_type = TYPE_TARGET_TYPE (fld_type);
+ if (TYPE_LENGTH (fld_type) >= 0 && TYPE_LENGTH (tgt_type) >= 0
+ && TYPE_LENGTH (fld_type) / TYPE_LENGTH (tgt_type) > 2)
+ return 1;
+ }
+ }
+ return 0;
+ }
+
+ /* The value is a union which contains at least one field which would be
+ returned in registers according to these rules -> returned in register. */
+ if (TYPE_CODE (type) == TYPE_CODE_UNION)
+ {
+ for (i = 0; i < TYPE_NFIELDS (type); ++i)
+ {
+ fld_type = TYPE_FIELD_TYPE (type, 0);
+ if (!v850_use_struct_convention (fld_type))
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+/* Structure for mapping bits in register lists to register numbers. */
struct reg_list
{
long mask;
int regno;
};
-/* Helper function for v850_scan_prologue to handle prepare instruction. */
+/* Helper function for v850_scan_prologue to handle prepare instruction. */
static void
-handle_prepare (int insn, int insn2, CORE_ADDR * current_pc_ptr,
- struct prologue_info *pi, struct pifsr **pifsr_ptr)
+v850_handle_prepare (int insn, int insn2, CORE_ADDR * current_pc_ptr,
+ struct v850_frame_cache *pi, struct pifsr **pifsr_ptr)
{
CORE_ADDR current_pc = *current_pc_ptr;
struct pifsr *pifsr = *pifsr_ptr;
};
int i;
- if ((next & 0x1f) == 0x0b) /* skip imm16 argument */
+ if ((next & 0x1f) == 0x0b) /* skip imm16 argument */
current_pc += 2;
else if ((next & 0x1f) == 0x13) /* skip imm16 argument */
current_pc += 2;
else if ((next & 0x1f) == 0x1b) /* skip imm32 argument */
current_pc += 4;
- /* Calculate the total size of the saved registers, and add it
- it to the immediate value used to adjust SP. */
+ /* Calculate the total size of the saved registers, and add it to the
+ immediate value used to adjust SP. */
for (i = 0; reg_table[i].mask != 0; i++)
if (list12 & reg_table[i].mask)
- offset += REGISTER_RAW_SIZE (regtable[i].regno);
- pi->frameoffset -= offset;
+ offset += v850_reg_size;
+ pi->sp_offset -= offset;
- /* Calculate the offsets of the registers relative to the value
- the SP will have after the registers have been pushed and the
- imm5 value has been subtracted from it. */
+ /* Calculate the offsets of the registers relative to the value the SP
+ will have after the registers have been pushed and the imm5 value has
+ been subtracted from it. */
if (pifsr)
{
for (i = 0; reg_table[i].mask != 0; i++)
if (list12 & reg_table[i].mask)
{
int reg = reg_table[i].regno;
- offset -= REGISTER_RAW_SIZE (reg);
+ offset -= v850_reg_size;
pifsr->reg = reg;
pifsr->offset = offset;
- pifsr->cur_frameoffset = pi->frameoffset;
-#ifdef DEBUG
- printf_filtered ("\tSaved register r%d, offset %d", reg, pifsr->offset);
-#endif
+ pifsr->cur_frameoffset = pi->sp_offset;
pifsr++;
}
}
}
-#ifdef DEBUG
- printf_filtered ("\tfound ctret after regsave func");
-#endif
- /* Set result parameters. */
+ /* Set result parameters. */
*current_pc_ptr = current_pc;
*pifsr_ptr = pifsr;
}
/* Helper function for v850_scan_prologue to handle pushm/pushl instructions.
- FIXME: the SR bit of the register list is not supported; must check
- that the compiler does not ever generate this bit. */
+ The SR bit of the register list is not supported. gcc does not generate
+ this bit. */
static void
-handle_pushm (int insn, int insn2, struct prologue_info *pi,
- struct pifsr **pifsr_ptr)
+v850_handle_pushm (int insn, int insn2, struct v850_frame_cache *pi,
+ struct pifsr **pifsr_ptr)
{
struct pifsr *pifsr = *pifsr_ptr;
long list12 = ((insn & 0x0f) << 16) + (insn2 & 0xfff0);
long offset = 0;
static struct reg_list pushml_reg_table[] =
{
- {0x80000, PS_REGNUM}, /* PSW */
+ {0x80000, E_PS_REGNUM}, /* PSW */
{0x40000, 1}, /* r1 */
{0x20000, 2}, /* r2 */
{0x10000, 3}, /* r3 */
struct reg_list *reg_table;
int i;
- /* Is this a pushml or a pushmh? */
+ /* Is this a pushml or a pushmh? */
if ((insn2 & 7) == 1)
reg_table = pushml_reg_table;
else
reg_table = pushmh_reg_table;
- /* Calculate the total size of the saved registers, and add it
- it to the immediate value used to adjust SP. */
+ /* Calculate the total size of the saved registers, and add it it to the
+ immediate value used to adjust SP. */
for (i = 0; reg_table[i].mask != 0; i++)
if (list12 & reg_table[i].mask)
- offset += REGISTER_RAW_SIZE (regtable[i].regno);
- pi->frameoffset -= offset;
+ offset += v850_reg_size;
+ pi->sp_offset -= offset;
- /* Calculate the offsets of the registers relative to the value
- the SP will have after the registers have been pushed and the
- imm5 value is subtracted from it. */
+ /* Calculate the offsets of the registers relative to the value the SP
+ will have after the registers have been pushed and the imm5 value is
+ subtracted from it. */
if (pifsr)
{
for (i = 0; reg_table[i].mask != 0; i++)
if (list12 & reg_table[i].mask)
{
int reg = reg_table[i].regno;
- offset -= REGISTER_RAW_SIZE (reg);
+ offset -= v850_reg_size;
pifsr->reg = reg;
pifsr->offset = offset;
- pifsr->cur_frameoffset = pi->frameoffset;
-#ifdef DEBUG
- printf_filtered ("\tSaved register r%d, offset %d", reg, pifsr->offset);
-#endif
+ pifsr->cur_frameoffset = pi->sp_offset;
pifsr++;
}
}
}
-#ifdef DEBUG
- printf_filtered ("\tfound ctret after regsave func");
-#endif
- /* Set result parameters. */
+ /* Set result parameters. */
*pifsr_ptr = pifsr;
}
-\f
+/* Helper function to evaluate if register is one of the "save" registers.
+ This allows to simplify conditionals in v850_analyze_prologue a lot. */
+static int
+v850_is_save_register (int reg)
+{
+ /* The caller-save registers are R2, R20 - R29 and R31. All other
+ registers are either special purpose (PC, SP), argument registers,
+ or just considered free for use in the caller. */
+ return reg == E_R2_REGNUM
+ || (reg >= E_R20_REGNUM && reg <= E_R29_REGNUM)
+ || reg == E_R31_REGNUM;
+}
-/* Function: scan_prologue
- Scan the prologue of the function that contains PC, and record what
- we find in PI. PI->fsr must be zeroed by the called. Returns the
- pc after the prologue. Note that the addresses saved in pi->fsr
- are actually just frame relative (negative offsets from the frame
- pointer). This is because we don't know the actual value of the
- frame pointer yet. In some circumstances, the frame pointer can't
- be determined till after we have scanned the prologue. */
+/* Scan the prologue of the function that contains PC, and record what
+ we find in PI. Returns the pc after the prologue. Note that the
+ addresses saved in frame->saved_regs are just frame relative (negative
+ offsets from the frame pointer). This is because we don't know the
+ actual value of the frame pointer yet. In some circumstances, the
+ frame pointer can't be determined till after we have scanned the
+ prologue. */
static CORE_ADDR
-v850_scan_prologue (CORE_ADDR pc, struct prologue_info *pi)
+v850_analyze_prologue (CORE_ADDR func_addr, CORE_ADDR pc,
+ struct v850_frame_cache *pi)
{
- CORE_ADDR func_addr, prologue_end, current_pc;
+ CORE_ADDR prologue_end, current_pc;
+ struct pifsr pifsrs[E_NUM_REGS + 1];
struct pifsr *pifsr, *pifsr_tmp;
int fp_used;
int ep_used;
int regsave_func_p;
int r12_tmp;
- /* First, figure out the bounds of the prologue so that we can limit the
- search to something reasonable. */
-
- if (find_pc_partial_function (pc, NULL, &func_addr, NULL))
- {
- struct symtab_and_line sal;
-
- sal = find_pc_line (func_addr, 0);
-
- if (func_addr == entry_point_address ())
- pi->start_function = 1;
- else
- pi->start_function = 0;
+ memset (&pifsrs, 0, sizeof pifsrs);
+ pifsr = &pifsrs[0];
-#if 0
- if (sal.line == 0)
- prologue_end = pc;
- else
- prologue_end = sal.end;
-#else
- prologue_end = pc;
-#endif
- }
- else
- { /* We're in the boondocks */
- func_addr = pc - 100;
- prologue_end = pc;
- }
-
- prologue_end = min (prologue_end, pc);
+ prologue_end = pc;
/* Now, search the prologue looking for instructions that setup fp, save
rp, adjust sp and such. We also record the frame offset of any saved
- registers. */
+ registers. */
- pi->frameoffset = 0;
- pi->framereg = SP_REGNUM;
- fp_used = 0;
+ pi->sp_offset = 0;
+ pi->uses_fp = 0;
ep_used = 0;
- pifsr = pi->pifsrs;
regsave_func_p = 0;
save_pc = 0;
save_end = 0;
r12_tmp = 0;
-#ifdef DEBUG
- printf_filtered ("Current_pc = 0x%.8lx, prologue_end = 0x%.8lx\n",
- (long) func_addr, (long) prologue_end);
-#endif
-
for (current_pc = func_addr; current_pc < prologue_end;)
{
- int insn, insn2;
+ int insn;
+ int insn2 = -1; /* dummy value */
-#ifdef DEBUG
- printf_filtered ("0x%.8lx ", (long) current_pc);
- (*tm_print_insn) (current_pc, &tm_print_insn_info);
-#endif
-
- insn = read_memory_unsigned_integer (current_pc, 2);
+ insn = read_memory_integer (current_pc, 2);
current_pc += 2;
if ((insn & 0x0780) >= 0x0600) /* Four byte instruction? */
{
- insn2 = read_memory_unsigned_integer (current_pc, 2);
+ insn2 = read_memory_integer (current_pc, 2);
current_pc += 2;
}
current_pc += disp - 4;
prologue_end = (current_pc
+ (2 * 3) /* moves to/from ep */
- + 4 /* addi <const>,sp,sp */
- + 2 /* jmp [r10] */
+ + 4 /* addi <const>,sp,sp */
+ + 2 /* jmp [r10] */
+ (2 * 12) /* sst.w to save r2, r20-r29, r31 */
+ 20); /* slop area */
-
-#ifdef DEBUG
- printf_filtered ("\tfound jarl <func>,r10, disp = %ld, low_disp = %ld, new pc = 0x%.8lx\n",
- disp, low_disp, (long) current_pc + 2);
-#endif
- continue;
}
else if ((insn & 0xffc0) == 0x0200 && !regsave_func_p)
{ /* callt <imm6> */
- long ctbp = read_register (CTBP_REGNUM);
+ long ctbp = read_register (E_CTBP_REGNUM);
long adr = ctbp + ((insn & 0x3f) << 1);
save_pc = current_pc;
current_pc = ctbp + (read_memory_unsigned_integer (adr, 2) & 0xffff);
prologue_end = (current_pc
+ (2 * 3) /* prepare list2,imm5,sp/imm */
- + 4 /* ctret */
+ + 4 /* ctret */
+ 20); /* slop area */
-
-#ifdef DEBUG
- printf_filtered ("\tfound callt, ctbp = 0x%.8lx, adr = %.8lx, new pc = 0x%.8lx\n",
- ctbp, adr, (long) current_pc);
-#endif
continue;
}
else if ((insn & 0xffc0) == 0x0780) /* prepare list2,imm5 */
{
- handle_prepare (insn, insn2, ¤t_pc, pi, &pifsr);
+ v850_handle_prepare (insn, insn2, ¤t_pc, pi, &pifsr);
continue;
}
else if (insn == 0x07e0 && regsave_func_p && insn2 == 0x0144)
- { /* ctret after processing register save function */
+ { /* ctret after processing register save. */
current_pc = save_pc;
prologue_end = save_end;
regsave_func_p = 0;
-#ifdef DEBUG
- printf_filtered ("\tfound ctret after regsave func");
-#endif
continue;
}
else if ((insn & 0xfff0) == 0x07e0 && (insn2 & 5) == 1)
{ /* pushml, pushmh */
- handle_pushm (insn, insn2, pi, &pifsr);
+ v850_handle_pushm (insn, insn2, pi, &pifsr);
continue;
}
else if ((insn & 0xffe0) == 0x0060 && regsave_func_p)
- { /* jmp after processing register save function */
+ { /* jmp after processing register save. */
current_pc = save_pc;
prologue_end = save_end;
regsave_func_p = 0;
-#ifdef DEBUG
- printf_filtered ("\tfound jmp after regsave func");
-#endif
continue;
}
else if ((insn & 0x07c0) == 0x0780 /* jarl or jr */
|| (insn & 0xffe0) == 0x0060 /* jmp */
|| (insn & 0x0780) == 0x0580) /* branch */
{
-#ifdef DEBUG
- printf_filtered ("\n");
-#endif
break; /* Ran into end of prologue */
}
- else if ((insn & 0xffe0) == ((SP_REGNUM << 11) | 0x0240)) /* add <imm>,sp */
- pi->frameoffset += ((insn & 0x1f) ^ 0x10) - 0x10;
- else if (insn == ((SP_REGNUM << 11) | 0x0600 | SP_REGNUM)) /* addi <imm>,sp,sp */
- pi->frameoffset += insn2;
- else if (insn == ((FP_RAW_REGNUM << 11) | 0x0000 | SP_REGNUM)) /* mov sp,fp */
- {
- fp_used = 1;
- pi->framereg = FP_RAW_REGNUM;
- }
-
- else if (insn == ((R12_REGNUM << 11) | 0x0640 | R0_REGNUM)) /* movhi hi(const),r0,r12 */
+ else if ((insn & 0xffe0) == ((E_SP_REGNUM << 11) | 0x0240))
+ /* add <imm>,sp */
+ pi->sp_offset += ((insn & 0x1f) ^ 0x10) - 0x10;
+ else if (insn == ((E_SP_REGNUM << 11) | 0x0600 | E_SP_REGNUM))
+ /* addi <imm>,sp,sp */
+ pi->sp_offset += insn2;
+ else if (insn == ((E_FP_REGNUM << 11) | 0x0000 | E_SP_REGNUM))
+ /* mov sp,fp */
+ pi->uses_fp = 1;
+ else if (insn == ((E_R12_REGNUM << 11) | 0x0640 | E_R0_REGNUM))
+ /* movhi hi(const),r0,r12 */
r12_tmp = insn2 << 16;
- else if (insn == ((R12_REGNUM << 11) | 0x0620 | R12_REGNUM)) /* movea lo(const),r12,r12 */
+ else if (insn == ((E_R12_REGNUM << 11) | 0x0620 | E_R12_REGNUM))
+ /* movea lo(const),r12,r12 */
r12_tmp += insn2;
- else if (insn == ((SP_REGNUM << 11) | 0x01c0 | R12_REGNUM) && r12_tmp) /* add r12,sp */
- pi->frameoffset = r12_tmp;
- else if (insn == ((EP_REGNUM << 11) | 0x0000 | SP_REGNUM)) /* mov sp,ep */
+ else if (insn == ((E_SP_REGNUM << 11) | 0x01c0 | E_R12_REGNUM) && r12_tmp)
+ /* add r12,sp */
+ pi->sp_offset += r12_tmp;
+ else if (insn == ((E_EP_REGNUM << 11) | 0x0000 | E_SP_REGNUM))
+ /* mov sp,ep */
ep_used = 1;
- else if (insn == ((EP_REGNUM << 11) | 0x0000 | R1_REGNUM)) /* mov r1,ep */
+ else if (insn == ((E_EP_REGNUM << 11) | 0x0000 | E_R1_REGNUM))
+ /* mov r1,ep */
ep_used = 0;
- else if (((insn & 0x07ff) == (0x0760 | SP_REGNUM) /* st.w <reg>,<offset>[sp] */
- || (fp_used
- && (insn & 0x07ff) == (0x0760 | FP_RAW_REGNUM))) /* st.w <reg>,<offset>[fp] */
+ else if (((insn & 0x07ff) == (0x0760 | E_SP_REGNUM)
+ || (pi->uses_fp
+ && (insn & 0x07ff) == (0x0760 | E_FP_REGNUM)))
&& pifsr
- && (((reg = (insn >> 11) & 0x1f) >= SAVE1_START_REGNUM && reg <= SAVE1_END_REGNUM)
- || (reg >= SAVE2_START_REGNUM && reg <= SAVE2_END_REGNUM)
- || (reg >= SAVE3_START_REGNUM && reg <= SAVE3_END_REGNUM)))
+ && v850_is_save_register (reg = (insn >> 11) & 0x1f))
{
+ /* st.w <reg>,<offset>[sp] or st.w <reg>,<offset>[fp] */
pifsr->reg = reg;
pifsr->offset = insn2 & ~1;
- pifsr->cur_frameoffset = pi->frameoffset;
-#ifdef DEBUG
- printf_filtered ("\tSaved register r%d, offset %d", reg, pifsr->offset);
-#endif
+ pifsr->cur_frameoffset = pi->sp_offset;
pifsr++;
}
-
- else if (ep_used /* sst.w <reg>,<offset>[ep] */
+ else if (ep_used
&& ((insn & 0x0781) == 0x0501)
&& pifsr
- && (((reg = (insn >> 11) & 0x1f) >= SAVE1_START_REGNUM && reg <= SAVE1_END_REGNUM)
- || (reg >= SAVE2_START_REGNUM && reg <= SAVE2_END_REGNUM)
- || (reg >= SAVE3_START_REGNUM && reg <= SAVE3_END_REGNUM)))
+ && v850_is_save_register (reg = (insn >> 11) & 0x1f))
{
+ /* sst.w <reg>,<offset>[ep] */
pifsr->reg = reg;
pifsr->offset = (insn & 0x007e) << 1;
- pifsr->cur_frameoffset = pi->frameoffset;
-#ifdef DEBUG
- printf_filtered ("\tSaved register r%d, offset %d", reg, pifsr->offset);
-#endif
+ pifsr->cur_frameoffset = pi->sp_offset;
pifsr++;
}
-
-#ifdef DEBUG
- printf_filtered ("\n");
-#endif
}
- if (pifsr)
- pifsr->framereg = 0; /* Tie off last entry */
-
- /* Fix up any offsets to the final offset. If a frame pointer was created, use it
- instead of the stack pointer. */
- for (pifsr_tmp = pi->pifsrs; pifsr_tmp && pifsr_tmp != pifsr; pifsr_tmp++)
+ /* Fix up any offsets to the final offset. If a frame pointer was created,
+ use it instead of the stack pointer. */
+ for (pifsr_tmp = pifsrs; pifsr_tmp != pifsr; pifsr_tmp++)
{
- pifsr_tmp->offset -= pi->frameoffset - pifsr_tmp->cur_frameoffset;
- pifsr_tmp->framereg = pi->framereg;
-
-#ifdef DEBUG
- printf_filtered ("Saved register r%d, offset = %d, framereg = r%d\n",
- pifsr_tmp->reg, pifsr_tmp->offset, pifsr_tmp->framereg);
-#endif
+ pifsr_tmp->offset -= pi->sp_offset - pifsr_tmp->cur_frameoffset;
+ pi->saved_regs[pifsr_tmp->reg].addr = pifsr_tmp->offset;
}
-#ifdef DEBUG
- printf_filtered ("Framereg = r%d, frameoffset = %d\n", pi->framereg, pi->frameoffset);
-#endif
-
return current_pc;
}
-/* Function: init_extra_frame_info
- Setup the frame's frame pointer, pc, and frame addresses for saved
- registers. Most of the work is done in scan_prologue().
-
- Note that when we are called for the last frame (currently active frame),
- that fi->pc and fi->frame will already be setup. However, fi->frame will
- be valid only if this routine uses FP. For previous frames, fi-frame will
- always be correct (since that is derived from v850_frame_chain ()).
-
- We can be called with the PC in the call dummy under two circumstances.
- First, during normal backtracing, second, while figuring out the frame
- pointer just prior to calling the target function (see run_stack_dummy). */
-
-void
-v850_init_extra_frame_info (struct frame_info *fi)
-{
- struct prologue_info pi;
- struct pifsr pifsrs[NUM_REGS + 1], *pifsr;
-
- if (fi->next)
- fi->pc = FRAME_SAVED_PC (fi->next);
-
- memset (fi->fsr.regs, '\000', sizeof fi->fsr.regs);
-
- /* The call dummy doesn't save any registers on the stack, so we can return
- now. */
- if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
- return;
-
- pi.pifsrs = pifsrs;
-
- v850_scan_prologue (fi->pc, &pi);
-
- if (!fi->next && pi.framereg == SP_REGNUM)
- fi->frame = read_register (pi.framereg) - pi.frameoffset;
-
- for (pifsr = pifsrs; pifsr->framereg; pifsr++)
- {
- fi->fsr.regs[pifsr->reg] = pifsr->offset + fi->frame;
-
- if (pifsr->framereg == SP_REGNUM)
- fi->fsr.regs[pifsr->reg] += pi.frameoffset;
- }
-}
-
-/* Function: frame_chain
- Figure out the frame prior to FI. Unfortunately, this involves
- scanning the prologue of the caller, which will also be done
- shortly by v850_init_extra_frame_info. For the dummy frame, we
- just return the stack pointer that was in use at the time the
- function call was made. */
-
-CORE_ADDR
-v850_frame_chain (struct frame_info *fi)
-{
- struct prologue_info pi;
- CORE_ADDR callers_pc, fp;
-
- /* First, find out who called us */
- callers_pc = FRAME_SAVED_PC (fi);
- /* If caller is a call-dummy, then our FP bears no relation to his FP! */
- fp = v850_find_callers_reg (fi, FP_RAW_REGNUM);
- if (PC_IN_CALL_DUMMY (callers_pc, fp, fp))
- return fp; /* caller is call-dummy: return oldest value of FP */
+/* Return the address of the first code past the prologue of the function. */
- /* Caller is NOT a call-dummy, so everything else should just work.
- Even if THIS frame is a call-dummy! */
- pi.pifsrs = NULL;
-
- v850_scan_prologue (callers_pc, &pi);
-
- if (pi.start_function)
- return 0; /* Don't chain beyond the start function */
-
- if (pi.framereg == FP_RAW_REGNUM)
- return v850_find_callers_reg (fi, pi.framereg);
-
- return fi->frame - pi.frameoffset;
-}
-
-/* Function: find_callers_reg
- Find REGNUM on the stack. Otherwise, it's in an active register.
- One thing we might want to do here is to check REGNUM against the
- clobber mask, and somehow flag it as invalid if it isn't saved on
- the stack somewhere. This would provide a graceful failure mode
- when trying to get the value of caller-saves registers for an inner
- frame. */
-
-CORE_ADDR
-v850_find_callers_reg (struct frame_info *fi, int regnum)
-{
- for (; fi; fi = fi->next)
- if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
- return generic_read_register_dummy (fi->pc, fi->frame, regnum);
- else if (fi->fsr.regs[regnum] != 0)
- return read_memory_unsigned_integer (fi->fsr.regs[regnum],
- REGISTER_RAW_SIZE (regnum));
-
- return read_register (regnum);
-}
-
-/* Function: skip_prologue
- Return the address of the first code past the prologue of the function. */
-
-CORE_ADDR
+static CORE_ADDR
v850_skip_prologue (CORE_ADDR pc)
{
CORE_ADDR func_addr, func_end;
struct symtab_and_line sal;
sal = find_pc_line (func_addr, 0);
-
if (sal.line != 0 && sal.end < func_end)
return sal.end;
- else
- /* Either there's no line info, or the line after the prologue is after
- the end of the function. In this case, there probably isn't a
- prologue. */
- return pc;
+
+ /* Either there's no line info, or the line after the prologue is after
+ the end of the function. In this case, there probably isn't a
+ prologue. */
+ return pc;
}
-/* We can't find the start of this function, so there's nothing we can do. */
+ /* We can't find the start of this function, so there's nothing we can do. */
return pc;
}
-/* Function: pop_frame
- This routine gets called when either the user uses the `return'
- command, or the call dummy breakpoint gets hit. */
-
-void
-v850_pop_frame (struct frame_info *frame)
+static CORE_ADDR
+v850_frame_align (struct gdbarch *ignore, CORE_ADDR sp)
{
- int regnum;
-
- if (PC_IN_CALL_DUMMY (frame->pc, frame->frame, frame->frame))
- generic_pop_dummy_frame ();
- else
- {
- write_register (PC_REGNUM, FRAME_SAVED_PC (frame));
-
- for (regnum = 0; regnum < NUM_REGS; regnum++)
- if (frame->fsr.regs[regnum] != 0)
- write_register (regnum,
- read_memory_unsigned_integer (frame->fsr.regs[regnum],
- REGISTER_RAW_SIZE (regnum)));
-
- write_register (SP_REGNUM, FRAME_FP (frame));
- }
-
- flush_cached_frames ();
+ return sp & ~3;
}
-/* Function: push_arguments
- Setup arguments and RP for a call to the target. First four args
+/* Setup arguments and LP for a call to the target. First four args
go in R6->R9, subsequent args go into sp + 16 -> sp + ... Structs
- are passed by reference. 64 bit quantities (doubles and long
- longs) may be split between the regs and the stack. When calling a
- function that returns a struct, a pointer to the struct is passed
- in as a secret first argument (always in R6).
+ are passed by reference. 64 bit quantities (doubles and long longs)
+ may be split between the regs and the stack. When calling a function
+ that returns a struct, a pointer to the struct is passed in as a secret
+ first argument (always in R6).
- Stack space for the args has NOT been allocated: that job is up to us.
- */
+ Stack space for the args has NOT been allocated: that job is up to us. */
-CORE_ADDR
-v850_push_arguments (int nargs, value_ptr *args, CORE_ADDR sp,
- unsigned char struct_return, CORE_ADDR struct_addr)
+static CORE_ADDR
+v850_push_dummy_call (struct gdbarch *gdbarch,
+ struct value *function,
+ struct regcache *regcache,
+ CORE_ADDR bp_addr,
+ int nargs,
+ struct value **args,
+ CORE_ADDR sp,
+ int struct_return,
+ CORE_ADDR struct_addr)
{
int argreg;
int argnum;
int len = 0;
int stack_offset;
- /* First, just for safety, make sure stack is aligned */
- sp &= ~3;
+ /* The offset onto the stack at which we will start copying parameters
+ (after the registers are used up) begins at 16 rather than at zero.
+ That's how the ABI is defined, though there's no indication that these
+ 16 bytes are used for anything, not even for saving incoming
+ argument registers. */
+ stack_offset = 16;
- /* Now make space on the stack for the args. */
+ /* Now make space on the stack for the args. */
for (argnum = 0; argnum < nargs; argnum++)
- len += ((TYPE_LENGTH (VALUE_TYPE (args[argnum])) + 3) & ~3);
- sp -= len; /* possibly over-allocating, but it works... */
- /* (you might think we could allocate 16 bytes */
- /* less, but the ABI seems to use it all! ) */
- argreg = ARG0_REGNUM;
+ len += ((TYPE_LENGTH (value_type (args[argnum])) + 3) & ~3);
+ sp -= len + stack_offset;
- /* the struct_return pointer occupies the first parameter-passing reg */
+ argreg = E_ARG0_REGNUM;
+ /* The struct_return pointer occupies the first parameter register. */
if (struct_return)
- write_register (argreg++, struct_addr);
-
- stack_offset = 16;
- /* The offset onto the stack at which we will start copying parameters
- (after the registers are used up) begins at 16 rather than at zero.
- I don't really know why, that's just the way it seems to work. */
+ regcache_cooked_write_unsigned (regcache, argreg++, struct_addr);
/* Now load as many as possible of the first arguments into
registers, and push the rest onto the stack. There are 16 bytes
for (argnum = 0; argnum < nargs; argnum++)
{
int len;
- char *val;
- char valbuf[REGISTER_RAW_SIZE (ARG0_REGNUM)];
+ gdb_byte *val;
+ gdb_byte valbuf[v850_reg_size];
- if (TYPE_CODE (VALUE_TYPE (*args)) == TYPE_CODE_STRUCT
- && TYPE_LENGTH (VALUE_TYPE (*args)) > 8)
+ if (!v850_type_is_scalar (value_type (*args))
+ && TYPE_LENGTH (value_type (*args)) > E_MAX_RETTYPE_SIZE_IN_REGS)
{
- store_address (valbuf, 4, VALUE_ADDRESS (*args));
+ store_unsigned_integer (valbuf, 4, VALUE_ADDRESS (*args));
len = 4;
val = valbuf;
}
else
{
- len = TYPE_LENGTH (VALUE_TYPE (*args));
- val = (char *) VALUE_CONTENTS (*args);
+ len = TYPE_LENGTH (value_type (*args));
+ val = (gdb_byte *) value_contents (*args);
}
while (len > 0)
- if (argreg <= ARGLAST_REGNUM)
+ if (argreg <= E_ARGLAST_REGNUM)
{
CORE_ADDR regval;
- regval = extract_address (val, REGISTER_RAW_SIZE (argreg));
- write_register (argreg, regval);
+ regval = extract_unsigned_integer (val, v850_reg_size);
+ regcache_cooked_write_unsigned (regcache, argreg, regval);
- len -= REGISTER_RAW_SIZE (argreg);
- val += REGISTER_RAW_SIZE (argreg);
+ len -= v850_reg_size;
+ val += v850_reg_size;
argreg++;
}
else
}
args++;
}
+
+ /* Store return address. */
+ regcache_cooked_write_unsigned (regcache, E_LP_REGNUM, bp_addr);
+
+ /* Update stack pointer. */
+ regcache_cooked_write_unsigned (regcache, E_SP_REGNUM, sp);
+
return sp;
}
-/* Function: push_return_address (pc)
- Set up the return address for the inferior function call.
- Needed for targets where we don't actually execute a JSR/BSR instruction */
+static void
+v850_extract_return_value (struct type *type, struct regcache *regcache,
+ gdb_byte *valbuf)
+{
+ int len = TYPE_LENGTH (type);
+
+ if (len <= v850_reg_size)
+ {
+ ULONGEST val;
+
+ regcache_cooked_read_unsigned (regcache, E_V0_REGNUM, &val);
+ store_unsigned_integer (valbuf, len, val);
+ }
+ else if (len <= 2 * v850_reg_size)
+ {
+ int i, regnum = E_V0_REGNUM;
+ gdb_byte buf[v850_reg_size];
+ for (i = 0; len > 0; i += 4, len -= 4)
+ {
+ regcache_raw_read (regcache, regnum++, buf);
+ memcpy (valbuf + i, buf, len > 4 ? 4 : len);
+ }
+ }
+}
+
+static void
+v850_store_return_value (struct type *type, struct regcache *regcache,
+ const gdb_byte *valbuf)
+{
+ int len = TYPE_LENGTH (type);
+
+ if (len <= v850_reg_size)
+ regcache_cooked_write_unsigned (regcache, E_V0_REGNUM,
+ extract_unsigned_integer (valbuf, len));
+ else if (len <= 2 * v850_reg_size)
+ {
+ int i, regnum = E_V0_REGNUM;
+ for (i = 0; i < len; i += 4)
+ regcache_raw_write (regcache, regnum++, valbuf + i);
+ }
+}
-CORE_ADDR
-v850_push_return_address (CORE_ADDR pc, CORE_ADDR sp)
+static enum return_value_convention
+v850_return_value (struct gdbarch *gdbarch, struct type *type,
+ struct regcache *regcache,
+ gdb_byte *readbuf, const gdb_byte *writebuf)
{
- write_register (RP_REGNUM, CALL_DUMMY_ADDRESS ());
- return sp;
+ if (v850_use_struct_convention (type))
+ return RETURN_VALUE_STRUCT_CONVENTION;
+ if (writebuf)
+ v850_store_return_value (type, regcache, writebuf);
+ else if (readbuf)
+ v850_extract_return_value (type, regcache, readbuf);
+ return RETURN_VALUE_REGISTER_CONVENTION;
}
-/* Function: frame_saved_pc
- Find the caller of this frame. We do this by seeing if RP_REGNUM
- is saved in the stack anywhere, otherwise we get it from the
- registers. If the inner frame is a dummy frame, return its PC
- instead of RP, because that's where "caller" of the dummy-frame
- will be found. */
+const static unsigned char *
+v850_breakpoint_from_pc (CORE_ADDR *pcptr, int *lenptr)
+{
+ static unsigned char breakpoint[] = { 0x85, 0x05 };
+ *lenptr = sizeof (breakpoint);
+ return breakpoint;
+}
-CORE_ADDR
-v850_frame_saved_pc (struct frame_info *fi)
+static struct v850_frame_cache *
+v850_alloc_frame_cache (struct frame_info *next_frame)
{
- if (PC_IN_CALL_DUMMY (fi->pc, fi->frame, fi->frame))
- return generic_read_register_dummy (fi->pc, fi->frame, PC_REGNUM);
- else
- return v850_find_callers_reg (fi, RP_REGNUM);
+ struct v850_frame_cache *cache;
+ int i;
+
+ cache = FRAME_OBSTACK_ZALLOC (struct v850_frame_cache);
+ cache->saved_regs = trad_frame_alloc_saved_regs (next_frame);
+
+ /* Base address. */
+ cache->base = 0;
+ cache->sp_offset = 0;
+ cache->pc = 0;
+
+ /* Frameless until proven otherwise. */
+ cache->uses_fp = 0;
+
+ return cache;
+}
+
+static struct v850_frame_cache *
+v850_frame_cache (struct frame_info *next_frame, void **this_cache)
+{
+ struct v850_frame_cache *cache;
+ CORE_ADDR current_pc;
+ int i;
+
+ if (*this_cache)
+ return *this_cache;
+
+ cache = v850_alloc_frame_cache (next_frame);
+ *this_cache = cache;
+
+ /* In principle, for normal frames, fp holds the frame pointer,
+ which holds the base address for the current stack frame.
+ However, for functions that don't need it, the frame pointer is
+ optional. For these "frameless" functions the frame pointer is
+ actually the frame pointer of the calling frame. */
+ cache->base = frame_unwind_register_unsigned (next_frame, E_FP_REGNUM);
+ if (cache->base == 0)
+ return cache;
+
+ cache->pc = frame_func_unwind (next_frame);
+ current_pc = frame_pc_unwind (next_frame);
+ if (cache->pc != 0)
+ v850_analyze_prologue (cache->pc, current_pc, cache);
+
+ if (!cache->uses_fp)
+ {
+ /* We didn't find a valid frame, which means that CACHE->base
+ currently holds the frame pointer for our calling frame. If
+ we're at the start of a function, or somewhere half-way its
+ prologue, the function's frame probably hasn't been fully
+ setup yet. Try to reconstruct the base address for the stack
+ frame by looking at the stack pointer. For truly "frameless"
+ functions this might work too. */
+ cache->base = frame_unwind_register_unsigned (next_frame, E_SP_REGNUM);
+ }
+
+ /* Now that we have the base address for the stack frame we can
+ calculate the value of sp in the calling frame. */
+ trad_frame_set_value (cache->saved_regs, E_SP_REGNUM,
+ cache->base - cache->sp_offset);
+
+ /* Adjust all the saved registers such that they contain addresses
+ instead of offsets. */
+ for (i = 0; i < E_NUM_REGS; i++)
+ if (trad_frame_addr_p (cache->saved_regs, i))
+ cache->saved_regs[i].addr += cache->base;
+
+ /* The call instruction moves the caller's PC in the callee's LP.
+ Since this is an unwind, do the reverse. Copy the location of LP
+ into PC (the address / regnum) so that a request for PC will be
+ converted into a request for the LP. */
+
+ cache->saved_regs[E_PC_REGNUM] = cache->saved_regs[E_LP_REGNUM];
+
+ return cache;
}
-/* Function: fix_call_dummy
- Pokes the callee function's address into the CALL_DUMMY assembly stub.
- Assumes that the CALL_DUMMY looks like this:
- jarl <offset24>, r31
- trap
- */
+static void
+v850_frame_prev_register (struct frame_info *next_frame, void **this_cache,
+ int regnum, int *optimizedp,
+ enum lval_type *lvalp, CORE_ADDR *addrp,
+ int *realnump, gdb_byte *valuep)
+{
+ struct v850_frame_cache *cache = v850_frame_cache (next_frame, this_cache);
-int
-v850_fix_call_dummy (char *dummy, CORE_ADDR sp, CORE_ADDR fun, int nargs,
- value_ptr *args, struct type *type, int gcc_p)
+ gdb_assert (regnum >= 0);
+
+ trad_frame_get_prev_register (next_frame, cache->saved_regs, regnum,
+ optimizedp, lvalp, addrp, realnump, valuep);
+}
+
+static void
+v850_frame_this_id (struct frame_info *next_frame, void **this_cache,
+ struct frame_id *this_id)
{
- long offset24;
+ struct v850_frame_cache *cache = v850_frame_cache (next_frame, this_cache);
- offset24 = (long) fun - (long) entry_point_address ();
- offset24 &= 0x3fffff;
- offset24 |= 0xff800000; /* jarl <offset24>, r31 */
+ /* This marks the outermost frame. */
+ if (cache->base == 0)
+ return;
- store_unsigned_integer ((unsigned int *) &dummy[2], 2, offset24 & 0xffff);
- store_unsigned_integer ((unsigned int *) &dummy[0], 2, offset24 >> 16);
- return 0;
+ *this_id = frame_id_build (cache->saved_regs[E_SP_REGNUM].addr, cache->pc);
}
-/* Change the register names based on the current machine type. */
+static const struct frame_unwind v850_frame_unwind = {
+ NORMAL_FRAME,
+ v850_frame_this_id,
+ v850_frame_prev_register
+};
+
+static const struct frame_unwind *
+v850_frame_sniffer (struct frame_info *next_frame)
+{
+ return &v850_frame_unwind;
+}
-static int
-v850_target_architecture_hook (const bfd_arch_info_type *ap)
+static CORE_ADDR
+v850_unwind_sp (struct gdbarch *gdbarch, struct frame_info *next_frame)
{
- int i, j;
+ return frame_unwind_register_unsigned (next_frame, SP_REGNUM);
+}
- if (ap->arch != bfd_arch_v850)
- return 0;
+static CORE_ADDR
+v850_unwind_pc (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ return frame_unwind_register_unsigned (next_frame, PC_REGNUM);
+}
- for (i = 0; v850_processor_type_table[i].regnames != NULL; i++)
+static struct frame_id
+v850_unwind_dummy_id (struct gdbarch *gdbarch, struct frame_info *next_frame)
+{
+ return frame_id_build (v850_unwind_sp (gdbarch, next_frame),
+ frame_pc_unwind (next_frame));
+}
+
+static CORE_ADDR
+v850_frame_base_address (struct frame_info *next_frame, void **this_cache)
+{
+ struct v850_frame_cache *cache = v850_frame_cache (next_frame, this_cache);
+
+ return cache->base;
+}
+
+static const struct frame_base v850_frame_base = {
+ &v850_frame_unwind,
+ v850_frame_base_address,
+ v850_frame_base_address,
+ v850_frame_base_address
+};
+
+static struct gdbarch *
+v850_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
+{
+ struct gdbarch *gdbarch;
+
+ /* Change the register names based on the current machine type. */
+ if (info.bfd_arch_info->arch != bfd_arch_v850)
+ return NULL;
+
+ gdbarch = gdbarch_alloc (&info, NULL);
+
+ switch (info.bfd_arch_info->mach)
{
- if (v850_processor_type_table[i].mach == ap->mach)
- {
- v850_register_names = v850_processor_type_table[i].regnames;
- tm_print_insn_info.mach = ap->mach;
- return 1;
- }
+ case bfd_mach_v850:
+ set_gdbarch_register_name (gdbarch, v850_register_name);
+ break;
+ case bfd_mach_v850e:
+ case bfd_mach_v850e1:
+ set_gdbarch_register_name (gdbarch, v850e_register_name);
+ break;
}
- internal_error (__FILE__, __LINE__,
- "Architecture `%s' unrecognized", ap->printable_name);
+ set_gdbarch_num_regs (gdbarch, E_NUM_REGS);
+ set_gdbarch_num_pseudo_regs (gdbarch, 0);
+ set_gdbarch_sp_regnum (gdbarch, E_SP_REGNUM);
+ set_gdbarch_pc_regnum (gdbarch, E_PC_REGNUM);
+ set_gdbarch_fp0_regnum (gdbarch, -1);
+
+ set_gdbarch_register_type (gdbarch, v850_register_type);
+
+ set_gdbarch_char_signed (gdbarch, 0);
+ set_gdbarch_short_bit (gdbarch, 2 * TARGET_CHAR_BIT);
+ set_gdbarch_int_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ set_gdbarch_long_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ set_gdbarch_long_long_bit (gdbarch, 8 * TARGET_CHAR_BIT);
+
+ set_gdbarch_float_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ set_gdbarch_double_bit (gdbarch, 8 * TARGET_CHAR_BIT);
+ set_gdbarch_long_double_bit (gdbarch, 8 * TARGET_CHAR_BIT);
+
+ set_gdbarch_ptr_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+ set_gdbarch_addr_bit (gdbarch, 4 * TARGET_CHAR_BIT);
+
+ set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
+ set_gdbarch_breakpoint_from_pc (gdbarch, v850_breakpoint_from_pc);
+
+ set_gdbarch_return_value (gdbarch, v850_return_value);
+ set_gdbarch_push_dummy_call (gdbarch, v850_push_dummy_call);
+ set_gdbarch_skip_prologue (gdbarch, v850_skip_prologue);
+
+ set_gdbarch_print_insn (gdbarch, print_insn_v850);
+
+ set_gdbarch_frame_align (gdbarch, v850_frame_align);
+ set_gdbarch_unwind_sp (gdbarch, v850_unwind_sp);
+ set_gdbarch_unwind_pc (gdbarch, v850_unwind_pc);
+ set_gdbarch_unwind_dummy_id (gdbarch, v850_unwind_dummy_id);
+ frame_base_set_default (gdbarch, &v850_frame_base);
+
+ /* Hook in ABI-specific overrides, if they have been registered. */
+ gdbarch_init_osabi (info, gdbarch);
+
+ frame_unwind_append_sniffer (gdbarch, dwarf2_frame_sniffer);
+ frame_unwind_append_sniffer (gdbarch, v850_frame_sniffer);
+
+ return gdbarch;
}
+extern initialize_file_ftype _initialize_v850_tdep; /* -Wmissing-prototypes */
+
void
_initialize_v850_tdep (void)
{
- tm_print_insn = print_insn_v850;
- target_architecture_hook = v850_target_architecture_hook;
+ register_gdbarch_init (bfd_arch_v850, v850_gdbarch_init);
}