/* Print values for GDB, the GNU debugger.
- Copyright 1986, 1988, 1989, 1991 Free Software Foundation, Inc.
-This file is part of GDB.
+ Copyright 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
+ 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2005 Free Software
+ Foundation, Inc.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This file is part of GDB.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
#include "defs.h"
-#include <string.h>
+#include "gdb_string.h"
#include "symtab.h"
#include "gdbtypes.h"
#include "value.h"
#include "gdbcore.h"
#include "gdbcmd.h"
#include "target.h"
-#include "obstack.h"
#include "language.h"
-#include "demangle.h"
+#include "annotate.h"
+#include "valprint.h"
+#include "floatformat.h"
+#include "doublest.h"
#include <errno.h>
/* Prototypes for local functions */
-static void
-print_hex_chars PARAMS ((FILE *, unsigned char *, unsigned int));
+static int partial_memory_read (CORE_ADDR memaddr, char *myaddr,
+ int len, int *errnoptr);
-static void
-show_print PARAMS ((char *, int));
+static void show_print (char *, int);
-static void
-set_print PARAMS ((char *, int));
+static void set_print (char *, int);
-static void
-set_radix PARAMS ((char *, int, struct cmd_list_element *));
+static void set_radix (char *, int);
-static void
-set_output_radix PARAMS ((char *, int, struct cmd_list_element *));
+static void show_radix (char *, int);
-static void
-value_print_array_elements PARAMS ((value, FILE *, int, enum val_prettyprint));
+static void set_input_radix (char *, int, struct cmd_list_element *);
+
+static void set_input_radix_1 (int, unsigned);
+
+static void set_output_radix (char *, int, struct cmd_list_element *);
-/* Maximum number of chars to print for a string pointer value
- or vector contents, or UINT_MAX for no limit. */
+static void set_output_radix_1 (int, unsigned);
+
+void _initialize_valprint (void);
+
+/* Maximum number of chars to print for a string pointer value or vector
+ contents, or UINT_MAX for no limit. Note that "set print elements 0"
+ stores UINT_MAX in print_max, which displays in a show command as
+ "unlimited". */
unsigned int print_max;
+#define PRINT_MAX_DEFAULT 200 /* Start print_max off at this value. */
+static void
+show_print_max (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Limit on string chars or array elements to print is %s.\n"),
+ value);
+}
+
/* Default input and output radixes, and output format letter. */
unsigned input_radix = 10;
+static void
+show_input_radix (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Default input radix for entering numbers is %s.\n"),
+ value);
+}
+
unsigned output_radix = 10;
+static void
+show_output_radix (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Default output radix for printing of values is %s.\n"),
+ value);
+}
int output_format = 0;
+/* By default we print arrays without printing the index of each element in
+ the array. This behavior can be changed by setting PRINT_ARRAY_INDEXES. */
+
+static int print_array_indexes = 0;
+static void
+show_print_array_indexes (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Printing of array indexes is %s.\n"), value);
+}
+
/* Print repeat counts if there are more than this many repetitions of an
element in an array. Referenced by the low level language dependent
print routines. */
unsigned int repeat_count_threshold = 10;
+static void
+show_repeat_count_threshold (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Threshold for repeated print elements is %s.\n"),
+ value);
+}
-int prettyprint_structs; /* Controls pretty printing of structures */
-int prettyprint_arrays; /* Controls pretty printing of arrays. */
+/* If nonzero, stops printing of char arrays at first null. */
+
+int stop_print_at_null;
+static void
+show_stop_print_at_null (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Printing of char arrays to stop at first null char is %s.\n"),
+ value);
+}
+
+/* Controls pretty printing of structures. */
+
+int prettyprint_structs;
+static void
+show_prettyprint_structs (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Prettyprinting of structures is %s.\n"), value);
+}
+
+/* Controls pretty printing of arrays. */
+
+int prettyprint_arrays;
+static void
+show_prettyprint_arrays (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Prettyprinting of arrays is %s.\n"), value);
+}
/* If nonzero, causes unions inside structures or other unions to be
printed. */
int unionprint; /* Controls printing of nested unions. */
+static void
+show_unionprint (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("\
+Printing of unions interior to structures is %s.\n"),
+ value);
+}
/* If nonzero, causes machine addresses to be printed in certain contexts. */
int addressprint; /* Controls printing of machine addresses */
-
+static void
+show_addressprint (struct ui_file *file, int from_tty,
+ struct cmd_list_element *c, const char *value)
+{
+ fprintf_filtered (file, _("Printing of addresses is %s.\n"), value);
+}
\f
-/* Print data of type TYPE located at VALADDR (within GDB),
- which came from the inferior at address ADDRESS,
- onto stdio stream STREAM according to FORMAT
- (a letter or 0 for natural format). The data at VALADDR
- is in target byte order.
- If the data are a string pointer, returns the number of
- sting characters printed.
+/* Print data of type TYPE located at VALADDR (within GDB), which came from
+ the inferior at address ADDRESS, onto stdio stream STREAM according to
+ FORMAT (a letter, or 0 for natural format using TYPE).
+
+ If DEREF_REF is nonzero, then dereference references, otherwise just print
+ them like pointers.
+
+ The PRETTY parameter controls prettyprinting.
- if DEREF_REF is nonzero, then dereference references,
- otherwise just print them like pointers.
+ If the data are a string pointer, returns the number of string characters
+ printed.
+
+ FIXME: The data at VALADDR is in target byte order. If gdb is ever
+ enhanced to be able to debug more than the single target it was compiled
+ for (specific CPU type and thus specific target byte ordering), then
+ either the print routines are going to have to take this into account,
+ or the data is going to have to be passed into here already converted
+ to the host byte ordering, whichever is more convenient. */
- The PRETTY parameter controls prettyprinting. */
int
-val_print (type, valaddr, address, stream, format, deref_ref, recurse,
- pretty)
- struct type *type;
- char *valaddr;
- CORE_ADDR address;
- FILE *stream;
- int format;
- int deref_ref;
- int recurse;
- enum val_prettyprint pretty;
+val_print (struct type *type, const gdb_byte *valaddr, int embedded_offset,
+ CORE_ADDR address, struct ui_file *stream, int format,
+ int deref_ref, int recurse, enum val_prettyprint pretty)
{
+ struct type *real_type = check_typedef (type);
if (pretty == Val_pretty_default)
{
pretty = prettyprint_structs ? Val_prettyprint : Val_no_prettyprint;
}
-
+
QUIT;
/* Ensure that the type is complete and not just a stub. If the type is
only a stub and we can't find and substitute its complete type, then
- print appropriate string and return. Typical types that my be stubs
- are structs, unions, and C++ methods. */
+ print appropriate string and return. */
- check_stub_type (type);
- if (TYPE_FLAGS (type) & TYPE_FLAG_STUB)
+ if (TYPE_STUB (real_type))
{
fprintf_filtered (stream, "<incomplete type>");
- fflush (stream);
+ gdb_flush (stream);
return (0);
}
-
- return (LA_VAL_PRINT (type, valaddr, address, stream, format, deref_ref,
- recurse, pretty));
+
+ return (LA_VAL_PRINT (type, valaddr, embedded_offset, address,
+ stream, format, deref_ref, recurse, pretty));
}
-/* Print the value VAL in C-ish syntax on stream STREAM.
- FORMAT is a format-letter, or 0 for print in natural format of data type.
- If the object printed is a string pointer, returns
- the number of string bytes printed. */
+/* Check whether the value VAL is printable. Return 1 if it is;
+ return 0 and print an appropriate error message to STREAM if it
+ is not. */
-int
-value_print (val, stream, format, pretty)
- value val;
- FILE *stream;
- int format;
- enum val_prettyprint pretty;
+static int
+value_check_printable (struct value *val, struct ui_file *stream)
{
- register unsigned int n, typelen;
-
if (val == 0)
{
- printf_filtered ("<address of value unknown>");
+ fprintf_filtered (stream, _("<address of value unknown>"));
return 0;
}
- if (VALUE_OPTIMIZED_OUT (val))
+
+ if (value_optimized_out (val))
{
- printf_filtered ("<value optimized out>");
+ fprintf_filtered (stream, _("<value optimized out>"));
return 0;
}
- /* A "repeated" value really contains several values in a row.
- They are made by the @ operator.
- Print such values as if they were arrays. */
+ return 1;
+}
+
+/* Print the value VAL onto stream STREAM according to FORMAT (a
+ letter, or 0 for natural format using TYPE).
+
+ If DEREF_REF is nonzero, then dereference references, otherwise just print
+ them like pointers.
+
+ The PRETTY parameter controls prettyprinting.
+
+ If the data are a string pointer, returns the number of string characters
+ printed.
+
+ This is a preferable interface to val_print, above, because it uses
+ GDB's value mechanism. */
+
+int
+common_val_print (struct value *val, struct ui_file *stream, int format,
+ int deref_ref, int recurse, enum val_prettyprint pretty)
+{
+ if (!value_check_printable (val, stream))
+ return 0;
+
+ return val_print (value_type (val), value_contents_all (val),
+ value_embedded_offset (val), VALUE_ADDRESS (val),
+ stream, format, deref_ref, recurse, pretty);
+}
+
+/* Print the value VAL in C-ish syntax on stream STREAM.
+ FORMAT is a format-letter, or 0 for print in natural format of data type.
+ If the object printed is a string pointer, returns
+ the number of string bytes printed. */
+
+int
+value_print (struct value *val, struct ui_file *stream, int format,
+ enum val_prettyprint pretty)
+{
+ if (!value_check_printable (val, stream))
+ return 0;
- if (VALUE_REPEATED (val))
+ return LA_VALUE_PRINT (val, stream, format, pretty);
+}
+
+/* Called by various <lang>_val_print routines to print
+ TYPE_CODE_INT's. TYPE is the type. VALADDR is the address of the
+ value. STREAM is where to print the value. */
+
+void
+val_print_type_code_int (struct type *type, const gdb_byte *valaddr,
+ struct ui_file *stream)
+{
+ if (TYPE_LENGTH (type) > sizeof (LONGEST))
{
- n = VALUE_REPETITIONS (val);
- typelen = TYPE_LENGTH (VALUE_TYPE (val));
- fprintf_filtered (stream, "{");
- /* Print arrays of characters using string syntax. */
- if (typelen == 1 && TYPE_CODE (VALUE_TYPE (val)) == TYPE_CODE_INT
- && format == 0)
- LA_PRINT_STRING (stream, VALUE_CONTENTS (val), n, 0);
+ LONGEST val;
+
+ if (TYPE_UNSIGNED (type)
+ && extract_long_unsigned_integer (valaddr, TYPE_LENGTH (type),
+ &val))
+ {
+ print_longest (stream, 'u', 0, val);
+ }
else
{
- value_print_array_elements (val, stream, format, pretty);
+ /* Signed, or we couldn't turn an unsigned value into a
+ LONGEST. For signed values, one could assume two's
+ complement (a reasonable assumption, I think) and do
+ better than this. */
+ print_hex_chars (stream, (unsigned char *) valaddr,
+ TYPE_LENGTH (type));
}
- fprintf_filtered (stream, "}");
- return (n * typelen);
}
else
{
- struct type *type = VALUE_TYPE (val);
+ print_longest (stream, TYPE_UNSIGNED (type) ? 'u' : 'd', 0,
+ unpack_long (type, valaddr));
+ }
+}
+
+/* Print a number according to FORMAT which is one of d,u,x,o,b,h,w,g.
+ The raison d'etre of this function is to consolidate printing of
+ LONG_LONG's into this one function. The format chars b,h,w,g are
+ from print_scalar_formatted(). Numbers are printed using C
+ format.
+
+ USE_C_FORMAT means to use C format in all cases. Without it,
+ 'o' and 'x' format do not include the standard C radix prefix
+ (leading 0 or 0x).
+
+ Hilfinger/2004-09-09: USE_C_FORMAT was originally called USE_LOCAL
+ and was intended to request formating according to the current
+ language and would be used for most integers that GDB prints. The
+ exceptional cases were things like protocols where the format of
+ the integer is a protocol thing, not a user-visible thing). The
+ parameter remains to preserve the information of what things might
+ be printed with language-specific format, should we ever resurrect
+ that capability. */
+
+void
+print_longest (struct ui_file *stream, int format, int use_c_format,
+ LONGEST val_long)
+{
+ const char *val;
- /* If it is a pointer, indicate what it points to.
+ switch (format)
+ {
+ case 'd':
+ val = int_string (val_long, 10, 1, 0, 1); break;
+ case 'u':
+ val = int_string (val_long, 10, 0, 0, 1); break;
+ case 'x':
+ val = int_string (val_long, 16, 0, 0, use_c_format); break;
+ case 'b':
+ val = int_string (val_long, 16, 0, 2, 1); break;
+ case 'h':
+ val = int_string (val_long, 16, 0, 4, 1); break;
+ case 'w':
+ val = int_string (val_long, 16, 0, 8, 1); break;
+ case 'g':
+ val = int_string (val_long, 16, 0, 16, 1); break;
+ break;
+ case 'o':
+ val = int_string (val_long, 8, 0, 0, use_c_format); break;
+ default:
+ internal_error (__FILE__, __LINE__, _("failed internal consistency check"));
+ }
+ fputs_filtered (val, stream);
+}
- Print type also if it is a reference.
+/* This used to be a macro, but I don't think it is called often enough
+ to merit such treatment. */
+/* Convert a LONGEST to an int. This is used in contexts (e.g. number of
+ arguments to a function, number in a value history, register number, etc.)
+ where the value must not be larger than can fit in an int. */
- C++: if it is a member pointer, we will take care
- of that when we print it. */
- if (TYPE_CODE (type) == TYPE_CODE_PTR ||
- TYPE_CODE (type) == TYPE_CODE_REF)
+int
+longest_to_int (LONGEST arg)
+{
+ /* Let the compiler do the work */
+ int rtnval = (int) arg;
+
+ /* Check for overflows or underflows */
+ if (sizeof (LONGEST) > sizeof (int))
+ {
+ if (rtnval != arg)
{
- /* Hack: remove (char *) for char strings. Their
- type is indicated by the quoted string anyway. */
- if (TYPE_CODE (type) == TYPE_CODE_PTR &&
- TYPE_LENGTH (TYPE_TARGET_TYPE (type)) == sizeof(char) &&
- TYPE_CODE (TYPE_TARGET_TYPE (type)) == TYPE_CODE_INT &&
- !TYPE_UNSIGNED (TYPE_TARGET_TYPE (type)))
- {
- /* Print nothing */
- }
- else
- {
- fprintf_filtered (stream, "(");
- type_print (type, "", stream, -1);
- fprintf_filtered (stream, ") ");
- }
+ error (_("Value out of range."));
}
- return (val_print (type, VALUE_CONTENTS (val),
- VALUE_ADDRESS (val), stream, format, 1, 0, pretty));
}
+ return (rtnval);
}
-/* Called by various <lang>_val_print routines to print TYPE_CODE_INT's */
+/* Print a floating point value of type TYPE (not always a
+ TYPE_CODE_FLT), pointed to in GDB by VALADDR, on STREAM. */
void
-val_print_type_code_int (type, valaddr, stream)
- struct type *type;
- char *valaddr;
- FILE *stream;
+print_floating (const gdb_byte *valaddr, struct type *type,
+ struct ui_file *stream)
{
- char *p;
- /* Pointer to first (i.e. lowest address) nonzero character. */
- char *first_addr;
- unsigned int len;
+ DOUBLEST doub;
+ int inv;
+ const struct floatformat *fmt = NULL;
+ unsigned len = TYPE_LENGTH (type);
- if (TYPE_LENGTH (type) > sizeof (LONGEST))
+ /* If it is a floating-point, check for obvious problems. */
+ if (TYPE_CODE (type) == TYPE_CODE_FLT)
+ fmt = floatformat_from_type (type);
+ if (fmt != NULL && floatformat_is_nan (fmt, valaddr))
+ {
+ if (floatformat_is_negative (fmt, valaddr))
+ fprintf_filtered (stream, "-");
+ fprintf_filtered (stream, "nan(");
+ fputs_filtered ("0x", stream);
+ fputs_filtered (floatformat_mantissa (fmt, valaddr), stream);
+ fprintf_filtered (stream, ")");
+ return;
+ }
+
+ /* NOTE: cagney/2002-01-15: The TYPE passed into print_floating()
+ isn't necessarily a TYPE_CODE_FLT. Consequently, unpack_double
+ needs to be used as that takes care of any necessary type
+ conversions. Such conversions are of course direct to DOUBLEST
+ and disregard any possible target floating point limitations.
+ For instance, a u64 would be converted and displayed exactly on a
+ host with 80 bit DOUBLEST but with loss of information on a host
+ with 64 bit DOUBLEST. */
+
+ doub = unpack_double (type, valaddr, &inv);
+ if (inv)
{
- if (TYPE_UNSIGNED (type))
+ fprintf_filtered (stream, "<invalid float value>");
+ return;
+ }
+
+ /* FIXME: kettenis/2001-01-20: The following code makes too much
+ assumptions about the host and target floating point format. */
+
+ /* NOTE: cagney/2002-02-03: Since the TYPE of what was passed in may
+ not necessarily be a TYPE_CODE_FLT, the below ignores that and
+ instead uses the type's length to determine the precision of the
+ floating-point value being printed. */
+
+ if (len < sizeof (double))
+ fprintf_filtered (stream, "%.9g", (double) doub);
+ else if (len == sizeof (double))
+ fprintf_filtered (stream, "%.17g", (double) doub);
+ else
+#ifdef PRINTF_HAS_LONG_DOUBLE
+ fprintf_filtered (stream, "%.35Lg", doub);
+#else
+ /* This at least wins with values that are representable as
+ doubles. */
+ fprintf_filtered (stream, "%.17g", (double) doub);
+#endif
+}
+
+void
+print_binary_chars (struct ui_file *stream, const gdb_byte *valaddr,
+ unsigned len)
+{
+
+#define BITS_IN_BYTES 8
+
+ const gdb_byte *p;
+ unsigned int i;
+ int b;
+
+ /* Declared "int" so it will be signed.
+ * This ensures that right shift will shift in zeros.
+ */
+ const int mask = 0x080;
+
+ /* FIXME: We should be not printing leading zeroes in most cases. */
+
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ for (p = valaddr;
+ p < valaddr + len;
+ p++)
{
- /* First figure out whether the number in fact has zeros
- in all its bytes more significant than least significant
- sizeof (LONGEST) ones. */
- len = TYPE_LENGTH (type);
-
-#if TARGET_BYTE_ORDER == BIG_ENDIAN
- for (p = valaddr;
- len > sizeof (LONGEST) && p < valaddr + TYPE_LENGTH (type);
- p++)
-#else /* Little endian. */
- first_addr = valaddr;
- for (p = valaddr + TYPE_LENGTH (type);
- len > sizeof (LONGEST) && p >= valaddr;
- p--)
-#endif /* Little endian. */
+ /* Every byte has 8 binary characters; peel off
+ * and print from the MSB end.
+ */
+ for (i = 0; i < (BITS_IN_BYTES * sizeof (*p)); i++)
{
- if (*p == 0)
- {
- len--;
- }
+ if (*p & (mask >> i))
+ b = 1;
else
- {
- break;
- }
+ b = 0;
+
+ fprintf_filtered (stream, "%1d", b);
}
-#if TARGET_BYTE_ORDER == BIG_ENDIAN
- first_addr = p;
-#endif
- if (len <= sizeof (LONGEST))
+ }
+ }
+ else
+ {
+ for (p = valaddr + len - 1;
+ p >= valaddr;
+ p--)
+ {
+ for (i = 0; i < (BITS_IN_BYTES * sizeof (*p)); i++)
{
- /* We can print it in decimal. */
- fprintf_filtered
- (stream,
-#if defined (LONG_LONG)
- "%llu",
-#else
- "%lu",
-#endif
- unpack_long (BUILTIN_TYPE_LONGEST, first_addr));
+ if (*p & (mask >> i))
+ b = 1;
+ else
+ b = 0;
+
+ fprintf_filtered (stream, "%1d", b);
}
- else
+ }
+ }
+}
+
+/* VALADDR points to an integer of LEN bytes.
+ * Print it in octal on stream or format it in buf.
+ */
+void
+print_octal_chars (struct ui_file *stream, const gdb_byte *valaddr,
+ unsigned len)
+{
+ const gdb_byte *p;
+ unsigned char octa1, octa2, octa3, carry;
+ int cycle;
+
+ /* FIXME: We should be not printing leading zeroes in most cases. */
+
+
+ /* Octal is 3 bits, which doesn't fit. Yuk. So we have to track
+ * the extra bits, which cycle every three bytes:
+ *
+ * Byte side: 0 1 2 3
+ * | | | |
+ * bit number 123 456 78 | 9 012 345 6 | 78 901 234 | 567 890 12 |
+ *
+ * Octal side: 0 1 carry 3 4 carry ...
+ *
+ * Cycle number: 0 1 2
+ *
+ * But of course we are printing from the high side, so we have to
+ * figure out where in the cycle we are so that we end up with no
+ * left over bits at the end.
+ */
+#define BITS_IN_OCTAL 3
+#define HIGH_ZERO 0340
+#define LOW_ZERO 0016
+#define CARRY_ZERO 0003
+#define HIGH_ONE 0200
+#define MID_ONE 0160
+#define LOW_ONE 0016
+#define CARRY_ONE 0001
+#define HIGH_TWO 0300
+#define MID_TWO 0070
+#define LOW_TWO 0007
+
+ /* For 32 we start in cycle 2, with two bits and one bit carry;
+ * for 64 in cycle in cycle 1, with one bit and a two bit carry.
+ */
+ cycle = (len * BITS_IN_BYTES) % BITS_IN_OCTAL;
+ carry = 0;
+
+ fputs_filtered ("0", stream);
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ for (p = valaddr;
+ p < valaddr + len;
+ p++)
+ {
+ switch (cycle)
+ {
+ case 0:
+ /* No carry in, carry out two bits.
+ */
+ octa1 = (HIGH_ZERO & *p) >> 5;
+ octa2 = (LOW_ZERO & *p) >> 2;
+ carry = (CARRY_ZERO & *p);
+ fprintf_filtered (stream, "%o", octa1);
+ fprintf_filtered (stream, "%o", octa2);
+ break;
+
+ case 1:
+ /* Carry in two bits, carry out one bit.
+ */
+ octa1 = (carry << 1) | ((HIGH_ONE & *p) >> 7);
+ octa2 = (MID_ONE & *p) >> 4;
+ octa3 = (LOW_ONE & *p) >> 1;
+ carry = (CARRY_ONE & *p);
+ fprintf_filtered (stream, "%o", octa1);
+ fprintf_filtered (stream, "%o", octa2);
+ fprintf_filtered (stream, "%o", octa3);
+ break;
+
+ case 2:
+ /* Carry in one bit, no carry out.
+ */
+ octa1 = (carry << 2) | ((HIGH_TWO & *p) >> 6);
+ octa2 = (MID_TWO & *p) >> 3;
+ octa3 = (LOW_TWO & *p);
+ carry = 0;
+ fprintf_filtered (stream, "%o", octa1);
+ fprintf_filtered (stream, "%o", octa2);
+ fprintf_filtered (stream, "%o", octa3);
+ break;
+
+ default:
+ error (_("Internal error in octal conversion;"));
+ }
+
+ cycle++;
+ cycle = cycle % BITS_IN_OCTAL;
+ }
+ }
+ else
+ {
+ for (p = valaddr + len - 1;
+ p >= valaddr;
+ p--)
+ {
+ switch (cycle)
{
- /* It is big, so print it in hex. */
- print_hex_chars (stream, (unsigned char *) first_addr, len);
+ case 0:
+ /* Carry out, no carry in */
+ octa1 = (HIGH_ZERO & *p) >> 5;
+ octa2 = (LOW_ZERO & *p) >> 2;
+ carry = (CARRY_ZERO & *p);
+ fprintf_filtered (stream, "%o", octa1);
+ fprintf_filtered (stream, "%o", octa2);
+ break;
+
+ case 1:
+ /* Carry in, carry out */
+ octa1 = (carry << 1) | ((HIGH_ONE & *p) >> 7);
+ octa2 = (MID_ONE & *p) >> 4;
+ octa3 = (LOW_ONE & *p) >> 1;
+ carry = (CARRY_ONE & *p);
+ fprintf_filtered (stream, "%o", octa1);
+ fprintf_filtered (stream, "%o", octa2);
+ fprintf_filtered (stream, "%o", octa3);
+ break;
+
+ case 2:
+ /* Carry in, no carry out */
+ octa1 = (carry << 2) | ((HIGH_TWO & *p) >> 6);
+ octa2 = (MID_TWO & *p) >> 3;
+ octa3 = (LOW_TWO & *p);
+ carry = 0;
+ fprintf_filtered (stream, "%o", octa1);
+ fprintf_filtered (stream, "%o", octa2);
+ fprintf_filtered (stream, "%o", octa3);
+ break;
+
+ default:
+ error (_("Internal error in octal conversion;"));
}
+
+ cycle++;
+ cycle = cycle % BITS_IN_OCTAL;
+ }
+ }
+
+}
+
+/* VALADDR points to an integer of LEN bytes.
+ * Print it in decimal on stream or format it in buf.
+ */
+void
+print_decimal_chars (struct ui_file *stream, const gdb_byte *valaddr,
+ unsigned len)
+{
+#define TEN 10
+#define TWO_TO_FOURTH 16
+#define CARRY_OUT( x ) ((x) / TEN) /* extend char to int */
+#define CARRY_LEFT( x ) ((x) % TEN)
+#define SHIFT( x ) ((x) << 4)
+#define START_P \
+ ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) ? valaddr : valaddr + len - 1)
+#define NOT_END_P \
+ ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) ? (p < valaddr + len) : (p >= valaddr))
+#define NEXT_P \
+ ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) ? p++ : p-- )
+#define LOW_NIBBLE( x ) ( (x) & 0x00F)
+#define HIGH_NIBBLE( x ) (((x) & 0x0F0) >> 4)
+
+ const gdb_byte *p;
+ unsigned char *digits;
+ int carry;
+ int decimal_len;
+ int i, j, decimal_digits;
+ int dummy;
+ int flip;
+
+ /* Base-ten number is less than twice as many digits
+ * as the base 16 number, which is 2 digits per byte.
+ */
+ decimal_len = len * 2 * 2;
+ digits = xmalloc (decimal_len);
+
+ for (i = 0; i < decimal_len; i++)
+ {
+ digits[i] = 0;
+ }
+
+ /* Ok, we have an unknown number of bytes of data to be printed in
+ * decimal.
+ *
+ * Given a hex number (in nibbles) as XYZ, we start by taking X and
+ * decemalizing it as "x1 x2" in two decimal nibbles. Then we multiply
+ * the nibbles by 16, add Y and re-decimalize. Repeat with Z.
+ *
+ * The trick is that "digits" holds a base-10 number, but sometimes
+ * the individual digits are > 10.
+ *
+ * Outer loop is per nibble (hex digit) of input, from MSD end to
+ * LSD end.
+ */
+ decimal_digits = 0; /* Number of decimal digits so far */
+ p = START_P;
+ flip = 0;
+ while (NOT_END_P)
+ {
+ /*
+ * Multiply current base-ten number by 16 in place.
+ * Each digit was between 0 and 9, now is between
+ * 0 and 144.
+ */
+ for (j = 0; j < decimal_digits; j++)
+ {
+ digits[j] = SHIFT (digits[j]);
+ }
+
+ /* Take the next nibble off the input and add it to what
+ * we've got in the LSB position. Bottom 'digit' is now
+ * between 0 and 159.
+ *
+ * "flip" is used to run this loop twice for each byte.
+ */
+ if (flip == 0)
+ {
+ /* Take top nibble.
+ */
+ digits[0] += HIGH_NIBBLE (*p);
+ flip = 1;
}
else
{
- /* Signed. One could assume two's complement (a reasonable
- assumption, I think) and do better than this. */
- print_hex_chars (stream, (unsigned char *) valaddr,
- TYPE_LENGTH (type));
+ /* Take low nibble and bump our pointer "p".
+ */
+ digits[0] += LOW_NIBBLE (*p);
+ NEXT_P;
+ flip = 0;
+ }
+
+ /* Re-decimalize. We have to do this often enough
+ * that we don't overflow, but once per nibble is
+ * overkill. Easier this way, though. Note that the
+ * carry is often larger than 10 (e.g. max initial
+ * carry out of lowest nibble is 15, could bubble all
+ * the way up greater than 10). So we have to do
+ * the carrying beyond the last current digit.
+ */
+ carry = 0;
+ for (j = 0; j < decimal_len - 1; j++)
+ {
+ digits[j] += carry;
+
+ /* "/" won't handle an unsigned char with
+ * a value that if signed would be negative.
+ * So extend to longword int via "dummy".
+ */
+ dummy = digits[j];
+ carry = CARRY_OUT (dummy);
+ digits[j] = CARRY_LEFT (dummy);
+
+ if (j >= decimal_digits && carry == 0)
+ {
+ /*
+ * All higher digits are 0 and we
+ * no longer have a carry.
+ *
+ * Note: "j" is 0-based, "decimal_digits" is
+ * 1-based.
+ */
+ decimal_digits = j + 1;
+ break;
+ }
}
}
- else
+
+ /* Ok, now "digits" is the decimal representation, with
+ * the "decimal_digits" actual digits. Print!
+ */
+ for (i = decimal_digits - 1; i >= 0; i--)
{
-#ifdef PRINT_TYPELESS_INTEGER
- PRINT_TYPELESS_INTEGER (stream, type, unpack_long (type, valaddr));
-#else
- fprintf_filtered (stream, TYPE_UNSIGNED (type) ?
-#if defined (LONG_LONG)
- "%llu" : "%lld",
-#else
- "%u" : "%d",
-#endif
- unpack_long (type, valaddr));
-#endif
+ fprintf_filtered (stream, "%1d", digits[i]);
}
-}
+ xfree (digits);
+}
-/* Print a floating point value of type TYPE, pointed to in GDB by VALADDR,
- on STREAM. */
+/* VALADDR points to an integer of LEN bytes. Print it in hex on stream. */
void
-print_floating (valaddr, type, stream)
- char *valaddr;
- struct type *type;
- FILE *stream;
+print_hex_chars (struct ui_file *stream, const gdb_byte *valaddr,
+ unsigned len)
{
- double doub;
- int inv;
- unsigned len = TYPE_LENGTH (type);
-
-#if defined (IEEE_FLOAT)
-
- /* Check for NaN's. Note that this code does not depend on us being
- on an IEEE conforming system. It only depends on the target
- machine using IEEE representation. This means (a)
- cross-debugging works right, and (2) IEEE_FLOAT can (and should)
- be defined for systems like the 68881, which uses IEEE
- representation, but is not IEEE conforming. */
-
- {
- long low, high;
- /* Is the sign bit 0? */
- int nonnegative;
- /* Is it is a NaN (i.e. the exponent is all ones and
- the fraction is nonzero)? */
- int is_nan;
-
- if (len == sizeof (float))
- {
- /* It's single precision. */
- memcpy ((char *) &low, valaddr, sizeof (low));
- /* target -> host. */
- SWAP_TARGET_AND_HOST (&low, sizeof (float));
- nonnegative = low >= 0;
- is_nan = ((((low >> 23) & 0xFF) == 0xFF)
- && 0 != (low & 0x7FFFFF));
- low &= 0x7fffff;
- high = 0;
- }
- else
- {
- /* It's double precision. Get the high and low words. */
-
-#if TARGET_BYTE_ORDER == BIG_ENDIAN
- memcpy (&low, valaddr+4, sizeof (low));
- memcpy (&high, valaddr+0, sizeof (high));
-#else
- memcpy (&low, valaddr+0, sizeof (low));
- memcpy (&high, valaddr+4, sizeof (high));
-#endif
- SWAP_TARGET_AND_HOST (&low, sizeof (low));
- SWAP_TARGET_AND_HOST (&high, sizeof (high));
- nonnegative = high >= 0;
- is_nan = (((high >> 20) & 0x7ff) == 0x7ff
- && ! ((((high & 0xfffff) == 0)) && (low == 0)));
- high &= 0xfffff;
- }
-
- if (is_nan)
- {
- /* The meaning of the sign and fraction is not defined by IEEE.
- But the user might know what they mean. For example, they
- (in an implementation-defined manner) distinguish between
- signaling and quiet NaN's. */
- if (high)
- fprintf_filtered (stream, "-NaN(0x%lx%.8lx)" + nonnegative,
- high, low);
- else
- fprintf_filtered (stream, "-NaN(0x%lx)" + nonnegative, low);
- return;
- }
- }
-#endif /* IEEE_FLOAT. */
+ const gdb_byte *p;
- doub = unpack_double (type, valaddr, &inv);
- if (inv)
- fprintf_filtered (stream, "<invalid float value>");
+ /* FIXME: We should be not printing leading zeroes in most cases. */
+
+ fputs_filtered ("0x", stream);
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ for (p = valaddr;
+ p < valaddr + len;
+ p++)
+ {
+ fprintf_filtered (stream, "%02x", *p);
+ }
+ }
else
- fprintf_filtered (stream, len <= sizeof(float) ? "%.9g" : "%.17g", doub);
+ {
+ for (p = valaddr + len - 1;
+ p >= valaddr;
+ p--)
+ {
+ fprintf_filtered (stream, "%02x", *p);
+ }
+ }
}
-/* VALADDR points to an integer of LEN bytes. Print it in hex on stream. */
+/* VALADDR points to a char integer of LEN bytes. Print it out in appropriate language form on stream.
+ Omit any leading zero chars. */
-static void
-print_hex_chars (stream, valaddr, len)
- FILE *stream;
- unsigned char *valaddr;
- unsigned len;
-{
- unsigned char *p;
-
- fprintf_filtered (stream, "0x");
-#if TARGET_BYTE_ORDER == BIG_ENDIAN
- for (p = valaddr;
- p < valaddr + len;
- p++)
-#else /* Little endian. */
- for (p = valaddr + len - 1;
- p >= valaddr;
- p--)
-#endif
+void
+print_char_chars (struct ui_file *stream, const gdb_byte *valaddr,
+ unsigned len)
+{
+ const gdb_byte *p;
+
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
- fprintf_filtered (stream, "%02x", *p);
+ p = valaddr;
+ while (p < valaddr + len - 1 && *p == 0)
+ ++p;
+
+ while (p < valaddr + len)
+ {
+ LA_EMIT_CHAR (*p, stream, '\'');
+ ++p;
+ }
+ }
+ else
+ {
+ p = valaddr + len - 1;
+ while (p > valaddr && *p == 0)
+ --p;
+
+ while (p >= valaddr)
+ {
+ LA_EMIT_CHAR (*p, stream, '\'');
+ --p;
+ }
}
}
+/* Return non-zero if the debugger should print the index of each element
+ when printing array values. */
+
+int
+print_array_indexes_p (void)
+{
+ return print_array_indexes;
+}
+
+/* Assuming TYPE is a simple, non-empty array type, compute its lower bound.
+ Save it into LOW_BOUND if not NULL.
+
+ Return 1 if the operation was successful. Return zero otherwise,
+ in which case the value of LOW_BOUND is unmodified.
+
+ Computing the array lower bound is pretty easy, but this function
+ does some additional verifications before returning the low bound.
+ If something incorrect is detected, it is better to return a status
+ rather than throwing an error, making it easier for the caller to
+ implement an error-recovery plan. For instance, it may decide to
+ warn the user that the bound was not found and then use a default
+ value instead. */
+
+int
+get_array_low_bound (struct type *type, long *low_bound)
+{
+ struct type *index = TYPE_INDEX_TYPE (type);
+ long low = 0;
+
+ if (index == NULL)
+ return 0;
+
+ if (TYPE_CODE (index) != TYPE_CODE_RANGE
+ && TYPE_CODE (index) != TYPE_CODE_ENUM)
+ return 0;
+
+ low = TYPE_LOW_BOUND (index);
+ if (low > TYPE_HIGH_BOUND (index))
+ return 0;
+
+ if (low_bound)
+ *low_bound = low;
+
+ return 1;
+}
+
+/* Print on STREAM using the given FORMAT the index for the element
+ at INDEX of an array whose index type is INDEX_TYPE. */
+
+void
+maybe_print_array_index (struct type *index_type, LONGEST index,
+ struct ui_file *stream, int format,
+ enum val_prettyprint pretty)
+{
+ struct value *index_value;
+
+ if (!print_array_indexes)
+ return;
+
+ index_value = value_from_longest (index_type, index);
+
+ LA_PRINT_ARRAY_INDEX (index_value, stream, format, pretty);
+}
+
/* Called by various <lang>_val_print routines to print elements of an
- array in the form "<elem1>, <elem2>, <elem3>, ...".
+ array in the form "<elem1>, <elem2>, <elem3>, ...".
- (FIXME?) Assumes array element separator is a comma, which is correct
- for all languages currently handled.
- (FIXME?) Some languages have a notation for repeated array elements,
- perhaps we should try to use that notation when appropriate.
- */
+ (FIXME?) Assumes array element separator is a comma, which is correct
+ for all languages currently handled.
+ (FIXME?) Some languages have a notation for repeated array elements,
+ perhaps we should try to use that notation when appropriate.
+ */
void
-val_print_array_elements (type, valaddr, address, stream, format, deref_ref,
- recurse, pretty, i)
- struct type *type;
- char *valaddr;
- CORE_ADDR address;
- FILE *stream;
- int format;
- int deref_ref;
- int recurse;
- enum val_prettyprint pretty;
- unsigned int i;
+val_print_array_elements (struct type *type, const gdb_byte *valaddr,
+ CORE_ADDR address, struct ui_file *stream,
+ int format, int deref_ref,
+ int recurse, enum val_prettyprint pretty,
+ unsigned int i)
{
unsigned int things_printed = 0;
unsigned len;
- struct type *elttype;
+ struct type *elttype, *index_type;
unsigned eltlen;
/* Position of the array element we are examining to see
whether it is repeated. */
unsigned int rep1;
/* Number of repetitions we have detected so far. */
unsigned int reps;
-
+ long low_bound_index = 0;
+
elttype = TYPE_TARGET_TYPE (type);
- eltlen = TYPE_LENGTH (elttype);
+ eltlen = TYPE_LENGTH (check_typedef (elttype));
len = TYPE_LENGTH (type) / eltlen;
-
+ index_type = TYPE_INDEX_TYPE (type);
+
+ /* Get the array low bound. This only makes sense if the array
+ has one or more element in it. */
+ if (len > 0 && !get_array_low_bound (type, &low_bound_index))
+ {
+ warning ("unable to get low bound of array, using zero as default");
+ low_bound_index = 0;
+ }
+
+ annotate_array_section_begin (i, elttype);
+
for (; i < len && things_printed < print_max; i++)
{
if (i != 0)
}
}
wrap_here (n_spaces (2 + 2 * recurse));
-
+ maybe_print_array_index (index_type, i + low_bound_index,
+ stream, format, pretty);
+
rep1 = i + 1;
reps = 1;
- while ((rep1 < len) &&
+ while ((rep1 < len) &&
!memcmp (valaddr + i * eltlen, valaddr + rep1 * eltlen, eltlen))
{
++reps;
++rep1;
}
-
+
if (reps > repeat_count_threshold)
{
- val_print (elttype, valaddr + i * eltlen, 0, stream, format,
+ val_print (elttype, valaddr + i * eltlen, 0, 0, stream, format,
deref_ref, recurse + 1, pretty);
+ annotate_elt_rep (reps);
fprintf_filtered (stream, " <repeats %u times>", reps);
+ annotate_elt_rep_end ();
+
i = rep1 - 1;
things_printed += repeat_count_threshold;
}
else
{
- val_print (elttype, valaddr + i * eltlen, 0, stream, format,
+ val_print (elttype, valaddr + i * eltlen, 0, 0, stream, format,
deref_ref, recurse + 1, pretty);
+ annotate_elt ();
things_printed++;
}
}
+ annotate_array_section_end ();
if (i < len)
{
fprintf_filtered (stream, "...");
}
}
-static void
-value_print_array_elements (val, stream, format, pretty)
- value val;
- FILE *stream;
- int format;
- enum val_prettyprint pretty;
+/* Read LEN bytes of target memory at address MEMADDR, placing the
+ results in GDB's memory at MYADDR. Returns a count of the bytes
+ actually read, and optionally an errno value in the location
+ pointed to by ERRNOPTR if ERRNOPTR is non-null. */
+
+/* FIXME: cagney/1999-10-14: Only used by val_print_string. Can this
+ function be eliminated. */
+
+static int
+partial_memory_read (CORE_ADDR memaddr, char *myaddr, int len, int *errnoptr)
{
- unsigned int things_printed = 0;
- register unsigned int i, n, typelen;
- /* Position of the array elem we are examining to see if it is repeated. */
- unsigned int rep1;
- /* Number of repetitions we have detected so far. */
- unsigned int reps;
-
- n = VALUE_REPETITIONS (val);
- typelen = TYPE_LENGTH (VALUE_TYPE (val));
- for (i = 0; i < n && things_printed < print_max; i++)
+ int nread; /* Number of bytes actually read. */
+ int errcode; /* Error from last read. */
+
+ /* First try a complete read. */
+ errcode = target_read_memory (memaddr, myaddr, len);
+ if (errcode == 0)
{
- if (i != 0)
+ /* Got it all. */
+ nread = len;
+ }
+ else
+ {
+ /* Loop, reading one byte at a time until we get as much as we can. */
+ for (errcode = 0, nread = 0; len > 0 && errcode == 0; nread++, len--)
{
- fprintf_filtered (stream, ", ");
+ errcode = target_read_memory (memaddr++, myaddr++, 1);
}
- wrap_here ("");
-
- rep1 = i + 1;
- reps = 1;
- while (rep1 < n && !memcmp (VALUE_CONTENTS (val) + typelen * i,
- VALUE_CONTENTS (val) + typelen * rep1,
- typelen))
+ /* If an error, the last read was unsuccessful, so adjust count. */
+ if (errcode != 0)
{
- ++reps;
- ++rep1;
+ nread--;
}
-
- if (reps > repeat_count_threshold)
+ }
+ if (errnoptr != NULL)
+ {
+ *errnoptr = errcode;
+ }
+ return (nread);
+}
+
+/* Print a string from the inferior, starting at ADDR and printing up to LEN
+ characters, of WIDTH bytes a piece, to STREAM. If LEN is -1, printing
+ stops at the first null byte, otherwise printing proceeds (including null
+ bytes) until either print_max or LEN characters have been printed,
+ whichever is smaller. */
+
+/* FIXME: Use target_read_string. */
+
+int
+val_print_string (CORE_ADDR addr, int len, int width, struct ui_file *stream)
+{
+ int force_ellipsis = 0; /* Force ellipsis to be printed if nonzero. */
+ int errcode; /* Errno returned from bad reads. */
+ unsigned int fetchlimit; /* Maximum number of chars to print. */
+ unsigned int nfetch; /* Chars to fetch / chars fetched. */
+ unsigned int chunksize; /* Size of each fetch, in chars. */
+ char *buffer = NULL; /* Dynamically growable fetch buffer. */
+ char *bufptr; /* Pointer to next available byte in buffer. */
+ char *limit; /* First location past end of fetch buffer. */
+ struct cleanup *old_chain = NULL; /* Top of the old cleanup chain. */
+ int found_nul; /* Non-zero if we found the nul char */
+
+ /* First we need to figure out the limit on the number of characters we are
+ going to attempt to fetch and print. This is actually pretty simple. If
+ LEN >= zero, then the limit is the minimum of LEN and print_max. If
+ LEN is -1, then the limit is print_max. This is true regardless of
+ whether print_max is zero, UINT_MAX (unlimited), or something in between,
+ because finding the null byte (or available memory) is what actually
+ limits the fetch. */
+
+ fetchlimit = (len == -1 ? print_max : min (len, print_max));
+
+ /* Now decide how large of chunks to try to read in one operation. This
+ is also pretty simple. If LEN >= zero, then we want fetchlimit chars,
+ so we might as well read them all in one operation. If LEN is -1, we
+ are looking for a null terminator to end the fetching, so we might as
+ well read in blocks that are large enough to be efficient, but not so
+ large as to be slow if fetchlimit happens to be large. So we choose the
+ minimum of 8 and fetchlimit. We used to use 200 instead of 8 but
+ 200 is way too big for remote debugging over a serial line. */
+
+ chunksize = (len == -1 ? min (8, fetchlimit) : fetchlimit);
+
+ /* Loop until we either have all the characters to print, or we encounter
+ some error, such as bumping into the end of the address space. */
+
+ found_nul = 0;
+ old_chain = make_cleanup (null_cleanup, 0);
+
+ if (len > 0)
+ {
+ buffer = (char *) xmalloc (len * width);
+ bufptr = buffer;
+ old_chain = make_cleanup (xfree, buffer);
+
+ nfetch = partial_memory_read (addr, bufptr, len * width, &errcode)
+ / width;
+ addr += nfetch * width;
+ bufptr += nfetch * width;
+ }
+ else if (len == -1)
+ {
+ unsigned long bufsize = 0;
+ do
{
- val_print (VALUE_TYPE (val), VALUE_CONTENTS (val) + typelen * i,
- VALUE_ADDRESS (val) + typelen * i, stream, format, 1,
- 0, pretty);
- fprintf (stream, " <repeats %u times>", reps);
- i = rep1 - 1;
- things_printed += repeat_count_threshold;
+ QUIT;
+ nfetch = min (chunksize, fetchlimit - bufsize);
+
+ if (buffer == NULL)
+ buffer = (char *) xmalloc (nfetch * width);
+ else
+ {
+ discard_cleanups (old_chain);
+ buffer = (char *) xrealloc (buffer, (nfetch + bufsize) * width);
+ }
+
+ old_chain = make_cleanup (xfree, buffer);
+ bufptr = buffer + bufsize * width;
+ bufsize += nfetch;
+
+ /* Read as much as we can. */
+ nfetch = partial_memory_read (addr, bufptr, nfetch * width, &errcode)
+ / width;
+
+ /* Scan this chunk for the null byte that terminates the string
+ to print. If found, we don't need to fetch any more. Note
+ that bufptr is explicitly left pointing at the next character
+ after the null byte, or at the next character after the end of
+ the buffer. */
+
+ limit = bufptr + nfetch * width;
+ while (bufptr < limit)
+ {
+ unsigned long c;
+
+ c = extract_unsigned_integer (bufptr, width);
+ addr += width;
+ bufptr += width;
+ if (c == 0)
+ {
+ /* We don't care about any error which happened after
+ the NULL terminator. */
+ errcode = 0;
+ found_nul = 1;
+ break;
+ }
+ }
}
- else
+ while (errcode == 0 /* no error */
+ && bufptr - buffer < fetchlimit * width /* no overrun */
+ && !found_nul); /* haven't found nul yet */
+ }
+ else
+ { /* length of string is really 0! */
+ buffer = bufptr = NULL;
+ errcode = 0;
+ }
+
+ /* bufptr and addr now point immediately beyond the last byte which we
+ consider part of the string (including a '\0' which ends the string). */
+
+ /* We now have either successfully filled the buffer to fetchlimit, or
+ terminated early due to an error or finding a null char when LEN is -1. */
+
+ if (len == -1 && !found_nul)
+ {
+ char *peekbuf;
+
+ /* We didn't find a null terminator we were looking for. Attempt
+ to peek at the next character. If not successful, or it is not
+ a null byte, then force ellipsis to be printed. */
+
+ peekbuf = (char *) alloca (width);
+
+ if (target_read_memory (addr, peekbuf, width) == 0
+ && extract_unsigned_integer (peekbuf, width) != 0)
+ force_ellipsis = 1;
+ }
+ else if ((len >= 0 && errcode != 0) || (len > (bufptr - buffer) / width))
+ {
+ /* Getting an error when we have a requested length, or fetching less
+ than the number of characters actually requested, always make us
+ print ellipsis. */
+ force_ellipsis = 1;
+ }
+
+ QUIT;
+
+ /* If we get an error before fetching anything, don't print a string.
+ But if we fetch something and then get an error, print the string
+ and then the error message. */
+ if (errcode == 0 || bufptr > buffer)
+ {
+ if (addressprint)
{
- val_print (VALUE_TYPE (val), VALUE_CONTENTS (val) + typelen * i,
- VALUE_ADDRESS (val) + typelen * i, stream, format, 1,
- 0, pretty);
- things_printed++;
+ fputs_filtered (" ", stream);
}
+ LA_PRINT_STRING (stream, buffer, (bufptr - buffer) / width, width, force_ellipsis);
}
- if (i < n)
+
+ if (errcode != 0)
{
- fprintf_filtered (stream, "...");
+ if (errcode == EIO)
+ {
+ fprintf_filtered (stream, " <Address ");
+ deprecated_print_address_numeric (addr, 1, stream);
+ fprintf_filtered (stream, " out of bounds>");
+ }
+ else
+ {
+ fprintf_filtered (stream, " <Error reading address ");
+ deprecated_print_address_numeric (addr, 1, stream);
+ fprintf_filtered (stream, ": %s>", safe_strerror (errcode));
+ }
}
+ gdb_flush (stream);
+ do_cleanups (old_chain);
+ return ((bufptr - buffer) / width);
}
-
\f
-#if 0
+
/* Validate an input or output radix setting, and make sure the user
knows what they really did here. Radix setting is confusing, e.g.
setting the input radix to "10" never changes it! */
-/* ARGSUSED */
static void
-set_input_radix (args, from_tty, c)
- char *args;
- int from_tty;
- struct cmd_list_element *c;
+set_input_radix (char *args, int from_tty, struct cmd_list_element *c)
{
- unsigned radix = *(unsigned *)c->var;
+ set_input_radix_1 (from_tty, input_radix);
+}
+static void
+set_input_radix_1 (int from_tty, unsigned radix)
+{
+ /* We don't currently disallow any input radix except 0 or 1, which don't
+ make any mathematical sense. In theory, we can deal with any input
+ radix greater than 1, even if we don't have unique digits for every
+ value from 0 to radix-1, but in practice we lose on large radix values.
+ We should either fix the lossage or restrict the radix range more.
+ (FIXME). */
+
+ if (radix < 2)
+ {
+ /* FIXME: cagney/2002-03-17: This needs to revert the bad radix
+ value. */
+ error (_("Nonsense input radix ``decimal %u''; input radix unchanged."),
+ radix);
+ }
+ input_radix = radix;
if (from_tty)
- printf_filtered ("Input radix set to decimal %d, hex %x, octal %o\n",
- radix, radix, radix);
+ {
+ printf_filtered (_("Input radix now set to decimal %u, hex %x, octal %o.\n"),
+ radix, radix, radix);
+ }
}
-#endif
-/* ARGSUSED */
static void
-set_output_radix (args, from_tty, c)
- char *args;
- int from_tty;
- struct cmd_list_element *c;
+set_output_radix (char *args, int from_tty, struct cmd_list_element *c)
{
- unsigned radix = *(unsigned *)c->var;
-
- if (from_tty)
- printf_filtered ("Output radix set to decimal %d, hex %x, octal %o\n",
- radix, radix, radix);
+ set_output_radix_1 (from_tty, output_radix);
+}
- /* FIXME, we really should be able to validate the setting BEFORE
- it takes effect. */
+static void
+set_output_radix_1 (int from_tty, unsigned radix)
+{
+ /* Validate the radix and disallow ones that we aren't prepared to
+ handle correctly, leaving the radix unchanged. */
switch (radix)
{
case 16:
- output_format = 'x';
+ output_format = 'x'; /* hex */
break;
case 10:
- output_format = 0;
+ output_format = 0; /* decimal */
break;
case 8:
- output_format = 'o'; /* octal */
+ output_format = 'o'; /* octal */
break;
default:
- output_format = 0;
- error ("Unsupported radix ``decimal %d''; using decimal output",
- radix);
+ /* FIXME: cagney/2002-03-17: This needs to revert the bad radix
+ value. */
+ error (_("Unsupported output radix ``decimal %u''; output radix unchanged."),
+ radix);
+ }
+ output_radix = radix;
+ if (from_tty)
+ {
+ printf_filtered (_("Output radix now set to decimal %u, hex %x, octal %o.\n"),
+ radix, radix, radix);
}
}
-/* Both at once */
+/* Set both the input and output radix at once. Try to set the output radix
+ first, since it has the most restrictive range. An radix that is valid as
+ an output radix is also valid as an input radix.
+
+ It may be useful to have an unusual input radix. If the user wishes to
+ set an input radix that is not valid as an output radix, he needs to use
+ the 'set input-radix' command. */
+
static void
-set_radix (arg, from_tty, c)
- char *arg;
- int from_tty;
- struct cmd_list_element *c;
+set_radix (char *arg, int from_tty)
{
- unsigned radix = *(unsigned *)c->var;
+ unsigned radix;
+ radix = (arg == NULL) ? 10 : parse_and_eval_long (arg);
+ set_output_radix_1 (0, radix);
+ set_input_radix_1 (0, radix);
if (from_tty)
- printf_filtered ("Radix set to decimal %d, hex %x, octal %o\n",
- radix, radix, radix);
+ {
+ printf_filtered (_("Input and output radices now set to decimal %u, hex %x, octal %o.\n"),
+ radix, radix, radix);
+ }
+}
- input_radix = radix;
- output_radix = radix;
+/* Show both the input and output radices. */
- set_output_radix (arg, 0, c);
+static void
+show_radix (char *arg, int from_tty)
+{
+ if (from_tty)
+ {
+ if (input_radix == output_radix)
+ {
+ printf_filtered (_("Input and output radices set to decimal %u, hex %x, octal %o.\n"),
+ input_radix, input_radix, input_radix);
+ }
+ else
+ {
+ printf_filtered (_("Input radix set to decimal %u, hex %x, octal %o.\n"),
+ input_radix, input_radix, input_radix);
+ printf_filtered (_("Output radix set to decimal %u, hex %x, octal %o.\n"),
+ output_radix, output_radix, output_radix);
+ }
+ }
}
\f
-/*ARGSUSED*/
+
static void
-set_print (arg, from_tty)
- char *arg;
- int from_tty;
+set_print (char *arg, int from_tty)
{
- printf (
-"\"set print\" must be followed by the name of a print subcommand.\n");
- help_list (setprintlist, "set print ", -1, stdout);
+ printf_unfiltered (
+ "\"set print\" must be followed by the name of a print subcommand.\n");
+ help_list (setprintlist, "set print ", -1, gdb_stdout);
}
-/*ARGSUSED*/
static void
-show_print (args, from_tty)
- char *args;
- int from_tty;
+show_print (char *args, int from_tty)
{
cmd_show_list (showprintlist, from_tty, "");
}
\f
void
-_initialize_valprint ()
+_initialize_valprint (void)
{
struct cmd_list_element *c;
add_prefix_cmd ("print", no_class, set_print,
- "Generic command for setting how things print.",
+ _("Generic command for setting how things print."),
&setprintlist, "set print ", 0, &setlist);
- add_alias_cmd ("p", "print", no_class, 1, &setlist);
- add_alias_cmd ("pr", "print", no_class, 1, &setlist); /* prefer set print
- to set prompt */
+ add_alias_cmd ("p", "print", no_class, 1, &setlist);
+ /* prefer set print to set prompt */
+ add_alias_cmd ("pr", "print", no_class, 1, &setlist);
+
add_prefix_cmd ("print", no_class, show_print,
- "Generic command for showing print settings.",
+ _("Generic command for showing print settings."),
&showprintlist, "show print ", 0, &showlist);
- add_alias_cmd ("p", "print", no_class, 1, &showlist);
- add_alias_cmd ("pr", "print", no_class, 1, &showlist);
-
- add_show_from_set
- (add_set_cmd ("elements", no_class, var_uinteger, (char *)&print_max,
- "Set limit on string chars or array elements to print.\n\
-\"set print elements 0\" causes there to be no limit.",
- &setprintlist),
- &showprintlist);
-
- add_show_from_set
- (add_set_cmd ("repeats", no_class, var_uinteger,
- (char *)&repeat_count_threshold,
- "Set threshold for repeated print elements.\n\
-\"set print repeats 0\" causes all elements to be individually printed.",
- &setprintlist),
- &showprintlist);
-
- add_show_from_set
- (add_set_cmd ("pretty", class_support, var_boolean,
- (char *)&prettyprint_structs,
- "Set prettyprinting of structures.",
- &setprintlist),
- &showprintlist);
-
- add_show_from_set
- (add_set_cmd ("union", class_support, var_boolean, (char *)&unionprint,
- "Set printing of unions interior to structures.",
- &setprintlist),
- &showprintlist);
-
- add_show_from_set
- (add_set_cmd ("array", class_support, var_boolean,
- (char *)&prettyprint_arrays,
- "Set prettyprinting of arrays.",
- &setprintlist),
- &showprintlist);
-
- add_show_from_set
- (add_set_cmd ("address", class_support, var_boolean, (char *)&addressprint,
- "Set printing of addresses.",
- &setprintlist),
- &showprintlist);
-
-#if 0
- /* The "show radix" cmd isn't good enough to show two separate values.
- The rest of the code works, but the show part is confusing, so don't
- let them be set separately 'til we work out "show". */
- c = add_set_cmd ("input-radix", class_support, var_uinteger,
- (char *)&input_radix,
- "Set default input radix for entering numbers.",
- &setlist);
- add_show_from_set (c, &showlist);
- c->function = set_input_radix;
-
- c = add_set_cmd ("output-radix", class_support, var_uinteger,
- (char *)&output_radix,
- "Set default output radix for printing of values.",
- &setlist);
- add_show_from_set (c, &showlist);
- c->function = set_output_radix;
-#endif
-
- c = add_set_cmd ("radix", class_support, var_uinteger,
- (char *)&output_radix,
- "Set default input and output number radix.",
- &setlist);
- add_show_from_set (c, &showlist);
- c->function.sfunc = set_radix;
+ add_alias_cmd ("p", "print", no_class, 1, &showlist);
+ add_alias_cmd ("pr", "print", no_class, 1, &showlist);
+
+ add_setshow_uinteger_cmd ("elements", no_class, &print_max, _("\
+Set limit on string chars or array elements to print."), _("\
+Show limit on string chars or array elements to print."), _("\
+\"set print elements 0\" causes there to be no limit."),
+ NULL,
+ show_print_max,
+ &setprintlist, &showprintlist);
+
+ add_setshow_boolean_cmd ("null-stop", no_class, &stop_print_at_null, _("\
+Set printing of char arrays to stop at first null char."), _("\
+Show printing of char arrays to stop at first null char."), NULL,
+ NULL,
+ show_stop_print_at_null,
+ &setprintlist, &showprintlist);
+
+ add_setshow_uinteger_cmd ("repeats", no_class,
+ &repeat_count_threshold, _("\
+Set threshold for repeated print elements."), _("\
+Show threshold for repeated print elements."), _("\
+\"set print repeats 0\" causes all elements to be individually printed."),
+ NULL,
+ show_repeat_count_threshold,
+ &setprintlist, &showprintlist);
+
+ add_setshow_boolean_cmd ("pretty", class_support, &prettyprint_structs, _("\
+Set prettyprinting of structures."), _("\
+Show prettyprinting of structures."), NULL,
+ NULL,
+ show_prettyprint_structs,
+ &setprintlist, &showprintlist);
+
+ add_setshow_boolean_cmd ("union", class_support, &unionprint, _("\
+Set printing of unions interior to structures."), _("\
+Show printing of unions interior to structures."), NULL,
+ NULL,
+ show_unionprint,
+ &setprintlist, &showprintlist);
+
+ add_setshow_boolean_cmd ("array", class_support, &prettyprint_arrays, _("\
+Set prettyprinting of arrays."), _("\
+Show prettyprinting of arrays."), NULL,
+ NULL,
+ show_prettyprint_arrays,
+ &setprintlist, &showprintlist);
+
+ add_setshow_boolean_cmd ("address", class_support, &addressprint, _("\
+Set printing of addresses."), _("\
+Show printing of addresses."), NULL,
+ NULL,
+ show_addressprint,
+ &setprintlist, &showprintlist);
+
+ add_setshow_uinteger_cmd ("input-radix", class_support, &input_radix, _("\
+Set default input radix for entering numbers."), _("\
+Show default input radix for entering numbers."), NULL,
+ set_input_radix,
+ show_input_radix,
+ &setlist, &showlist);
+
+ add_setshow_uinteger_cmd ("output-radix", class_support, &output_radix, _("\
+Set default output radix for printing of values."), _("\
+Show default output radix for printing of values."), NULL,
+ set_output_radix,
+ show_output_radix,
+ &setlist, &showlist);
+
+ /* The "set radix" and "show radix" commands are special in that
+ they are like normal set and show commands but allow two normally
+ independent variables to be either set or shown with a single
+ command. So the usual deprecated_add_set_cmd() and [deleted]
+ add_show_from_set() commands aren't really appropriate. */
+ /* FIXME: i18n: With the new add_setshow_integer command, that is no
+ longer true - show can display anything. */
+ add_cmd ("radix", class_support, set_radix, _("\
+Set default input and output number radices.\n\
+Use 'set input-radix' or 'set output-radix' to independently set each.\n\
+Without an argument, sets both radices back to the default value of 10."),
+ &setlist);
+ add_cmd ("radix", class_support, show_radix, _("\
+Show the default input and output number radices.\n\
+Use 'show input-radix' or 'show output-radix' to independently show each."),
+ &showlist);
+
+ add_setshow_boolean_cmd ("array-indexes", class_support,
+ &print_array_indexes, _("\
+Set printing of array indexes."), _("\
+Show printing of array indexes"), NULL, NULL, show_print_array_indexes,
+ &setprintlist, &showprintlist);
/* Give people the defaults which they are used to. */
prettyprint_structs = 0;
prettyprint_arrays = 0;
unionprint = 1;
addressprint = 1;
- print_max = 200;
+ print_max = PRINT_MAX_DEFAULT;
}