/* Print values for GDB, the GNU debugger.
- Copyright 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
- 1997, 1998, 1999, 2000, 2001
- Free Software Foundation, Inc.
+
+ Copyright 1986, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
+ 1996, 1997, 1998, 1999, 2000, 2001, 2002 Free Software Foundation,
+ Inc.
This file is part of GDB.
#include "gdbcore.h"
#include "gdbcmd.h"
#include "target.h"
-#include "obstack.h"
#include "language.h"
#include "annotate.h"
#include "valprint.h"
static int partial_memory_read (CORE_ADDR memaddr, char *myaddr,
int len, int *errnoptr);
-static void print_hex_chars (struct ui_file *, unsigned char *,
- unsigned int);
-
static void show_print (char *, int);
static void set_print (char *, int);
}
else
{
-#ifdef PRINT_TYPELESS_INTEGER
- PRINT_TYPELESS_INTEGER (stream, type, unpack_long (type, valaddr));
-#else
print_longest (stream, TYPE_UNSIGNED (type) ? 'u' : 'd', 0,
unpack_long (type, valaddr));
-#endif
}
}
/* Print a number according to FORMAT which is one of d,u,x,o,b,h,w,g.
The raison d'etre of this function is to consolidate printing of
- LONG_LONG's into this one function. Some platforms have long longs but
- don't have a printf() that supports "ll" in the format string. We handle
- these by seeing if the number is representable as either a signed or
- unsigned long, depending upon what format is desired, and if not we just
- bail out and print the number in hex.
-
- The format chars b,h,w,g are from print_scalar_formatted(). If USE_LOCAL,
- format it according to the current language (this should be used for most
- integers which GDB prints, the exception is things like protocols where
- the format of the integer is a protocol thing, not a user-visible thing).
- */
-
-#if defined (CC_HAS_LONG_LONG) && !defined (PRINTF_HAS_LONG_LONG)
-static void print_decimal (struct ui_file * stream, char *sign,
- int use_local, ULONGEST val_ulong);
-static void
-print_decimal (struct ui_file *stream, char *sign, int use_local,
- ULONGEST val_ulong)
-{
- unsigned long temp[3];
- int i = 0;
- do
- {
- temp[i] = val_ulong % (1000 * 1000 * 1000);
- val_ulong /= (1000 * 1000 * 1000);
- i++;
- }
- while (val_ulong != 0 && i < (sizeof (temp) / sizeof (temp[0])));
- switch (i)
- {
- case 1:
- fprintf_filtered (stream, "%s%lu",
- sign, temp[0]);
- break;
- case 2:
- fprintf_filtered (stream, "%s%lu%09lu",
- sign, temp[1], temp[0]);
- break;
- case 3:
- fprintf_filtered (stream, "%s%lu%09lu%09lu",
- sign, temp[2], temp[1], temp[0]);
- break;
- default:
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
- }
- return;
-}
-#endif
+ LONG_LONG's into this one function. The format chars b,h,w,g are
+ from print_scalar_formatted(). Numbers are printed using C
+ format.
+
+ USE_C_FORMAT means to use C format in all cases. Without it,
+ 'o' and 'x' format do not include the standard C radix prefix
+ (leading 0 or 0x).
+
+ Hilfinger/2004-09-09: USE_C_FORMAT was originally called USE_LOCAL
+ and was intended to request formating according to the current
+ language and would be used for most integers that GDB prints. The
+ exceptional cases were things like protocols where the format of
+ the integer is a protocol thing, not a user-visible thing). The
+ parameter remains to preserve the information of what things might
+ be printed with language-specific format, should we ever resurrect
+ that capability. */
void
-print_longest (struct ui_file *stream, int format, int use_local,
+print_longest (struct ui_file *stream, int format, int use_c_format,
LONGEST val_long)
{
-#if defined (CC_HAS_LONG_LONG) && !defined (PRINTF_HAS_LONG_LONG)
- if (sizeof (long) < sizeof (LONGEST))
- {
- switch (format)
- {
- case 'd':
- {
- /* Print a signed value, that doesn't fit in a long */
- if ((long) val_long != val_long)
- {
- if (val_long < 0)
- print_decimal (stream, "-", use_local, -val_long);
- else
- print_decimal (stream, "", use_local, val_long);
- return;
- }
- break;
- }
- case 'u':
- {
- /* Print an unsigned value, that doesn't fit in a long */
- if ((unsigned long) val_long != (ULONGEST) val_long)
- {
- print_decimal (stream, "", use_local, val_long);
- return;
- }
- break;
- }
- case 'x':
- case 'o':
- case 'b':
- case 'h':
- case 'w':
- case 'g':
- /* Print as unsigned value, must fit completely in unsigned long */
- {
- unsigned long temp = val_long;
- if (temp != val_long)
- {
- /* Urk, can't represent value in long so print in hex.
- Do shift in two operations so that if sizeof (long)
- == sizeof (LONGEST) we can avoid warnings from
- picky compilers about shifts >= the size of the
- shiftee in bits */
- unsigned long vbot = (unsigned long) val_long;
- LONGEST temp = (val_long >> (sizeof (long) * HOST_CHAR_BIT - 1));
- unsigned long vtop = temp >> 1;
- fprintf_filtered (stream, "0x%lx%08lx", vtop, vbot);
- return;
- }
- break;
- }
- }
- }
-#endif
-
-#if defined (CC_HAS_LONG_LONG) && defined (PRINTF_HAS_LONG_LONG)
- switch (format)
- {
- case 'd':
- fprintf_filtered (stream,
- use_local ? local_decimal_format_custom ("ll")
- : "%lld",
- val_long);
- break;
- case 'u':
- fprintf_filtered (stream, "%llu", (long long) val_long);
- break;
- case 'x':
- fprintf_filtered (stream,
- use_local ? local_hex_format_custom ("ll")
- : "%llx",
- val_long);
- break;
- case 'o':
- fprintf_filtered (stream,
- use_local ? local_octal_format_custom ("ll")
- : "%llo",
- val_long);
- break;
- case 'b':
- fprintf_filtered (stream, local_hex_format_custom ("02ll"), val_long);
- break;
- case 'h':
- fprintf_filtered (stream, local_hex_format_custom ("04ll"), val_long);
- break;
- case 'w':
- fprintf_filtered (stream, local_hex_format_custom ("08ll"), val_long);
- break;
- case 'g':
- fprintf_filtered (stream, local_hex_format_custom ("016ll"), val_long);
- break;
- default:
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
- }
-#else /* !CC_HAS_LONG_LONG || !PRINTF_HAS_LONG_LONG */
- /* In the following it is important to coerce (val_long) to a long. It does
- nothing if !LONG_LONG, but it will chop off the top half (which we know
- we can ignore) if the host supports long longs. */
-
- switch (format)
- {
- case 'd':
- fprintf_filtered (stream,
- use_local ? local_decimal_format_custom ("l")
- : "%ld",
- (long) val_long);
- break;
- case 'u':
- fprintf_filtered (stream, "%lu", (unsigned long) val_long);
- break;
- case 'x':
- fprintf_filtered (stream,
- use_local ? local_hex_format_custom ("l")
- : "%lx",
- (unsigned long) val_long);
- break;
- case 'o':
- fprintf_filtered (stream,
- use_local ? local_octal_format_custom ("l")
- : "%lo",
- (unsigned long) val_long);
- break;
- case 'b':
- fprintf_filtered (stream, local_hex_format_custom ("02l"),
- (unsigned long) val_long);
- break;
- case 'h':
- fprintf_filtered (stream, local_hex_format_custom ("04l"),
- (unsigned long) val_long);
- break;
- case 'w':
- fprintf_filtered (stream, local_hex_format_custom ("08l"),
- (unsigned long) val_long);
- break;
- case 'g':
- fprintf_filtered (stream, local_hex_format_custom ("016l"),
- (unsigned long) val_long);
- break;
- default:
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
- }
-#endif /* CC_HAS_LONG_LONG || PRINTF_HAS_LONG_LONG */
-}
-
-#if 0
-void
-strcat_longest (int format, int use_local, LONGEST val_long, char *buf,
- int buflen)
-{
-/* FIXME: Use buflen to avoid buffer overflow. */
-#if defined (CC_HAS_LONG_LONG) && !defined (PRINTF_HAS_LONG_LONG)
- long vtop, vbot;
+ const char *val;
- vtop = val_long >> (sizeof (long) * HOST_CHAR_BIT);
- vbot = (long) val_long;
-
- if ((format == 'd' && (val_long < INT_MIN || val_long > INT_MAX))
- || ((format == 'u' || format == 'x') && (unsigned long long) val_long > UINT_MAX))
- {
- sprintf (buf, "0x%lx%08lx", vtop, vbot);
- return;
- }
-#endif
-
-#ifdef PRINTF_HAS_LONG_LONG
switch (format)
{
case 'd':
- sprintf (buf,
- (use_local ? local_decimal_format_custom ("ll") : "%lld"),
- val_long);
- break;
+ val = int_string (val_long, 10, 1, 0, 1); break;
case 'u':
- sprintf (buf, "%llu", val_long);
- break;
+ val = int_string (val_long, 10, 0, 0, 1); break;
case 'x':
- sprintf (buf,
- (use_local ? local_hex_format_custom ("ll") : "%llx"),
-
- val_long);
- break;
- case 'o':
- sprintf (buf,
- (use_local ? local_octal_format_custom ("ll") : "%llo"),
- val_long);
- break;
+ val = int_string (val_long, 16, 0, 0, use_c_format); break;
case 'b':
- sprintf (buf, local_hex_format_custom ("02ll"), val_long);
- break;
+ val = int_string (val_long, 16, 0, 2, 1); break;
case 'h':
- sprintf (buf, local_hex_format_custom ("04ll"), val_long);
- break;
+ val = int_string (val_long, 16, 0, 4, 1); break;
case 'w':
- sprintf (buf, local_hex_format_custom ("08ll"), val_long);
- break;
+ val = int_string (val_long, 16, 0, 8, 1); break;
case 'g':
- sprintf (buf, local_hex_format_custom ("016ll"), val_long);
- break;
- default:
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
- }
-#else /* !PRINTF_HAS_LONG_LONG */
- /* In the following it is important to coerce (val_long) to a long. It does
- nothing if !LONG_LONG, but it will chop off the top half (which we know
- we can ignore) if the host supports long longs. */
-
- switch (format)
- {
- case 'd':
- sprintf (buf, (use_local ? local_decimal_format_custom ("l") : "%ld"),
- ((long) val_long));
- break;
- case 'u':
- sprintf (buf, "%lu", ((unsigned long) val_long));
- break;
- case 'x':
- sprintf (buf, (use_local ? local_hex_format_custom ("l") : "%lx"),
- ((long) val_long));
+ val = int_string (val_long, 16, 0, 16, 1); break;
break;
case 'o':
- sprintf (buf, (use_local ? local_octal_format_custom ("l") : "%lo"),
- ((long) val_long));
- break;
- case 'b':
- sprintf (buf, local_hex_format_custom ("02l"),
- ((long) val_long));
- break;
- case 'h':
- sprintf (buf, local_hex_format_custom ("04l"),
- ((long) val_long));
- break;
- case 'w':
- sprintf (buf, local_hex_format_custom ("08l"),
- ((long) val_long));
- break;
- case 'g':
- sprintf (buf, local_hex_format_custom ("016l"),
- ((long) val_long));
- break;
+ val = int_string (val_long, 8, 0, 0, use_c_format); break;
default:
internal_error (__FILE__, __LINE__, "failed internal consistency check");
- }
-
-#endif /* !PRINTF_HAS_LONG_LONG */
+ }
+ fputs_filtered (val, stream);
}
-#endif
/* This used to be a macro, but I don't think it is called often enough
to merit such treatment. */
if (floatformat_is_negative (fmt, valaddr))
fprintf_filtered (stream, "-");
fprintf_filtered (stream, "nan(");
- fprintf_filtered (stream, local_hex_format_prefix ());
- fprintf_filtered (stream, floatformat_mantissa (fmt, valaddr));
- fprintf_filtered (stream, local_hex_format_suffix ());
+ fputs_filtered ("0x", stream);
+ fputs_filtered (floatformat_mantissa (fmt, valaddr), stream);
fprintf_filtered (stream, ")");
return;
}
/* FIXME: We should be not printing leading zeroes in most cases. */
- fprintf_filtered (stream, local_binary_format_prefix ());
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
for (p = valaddr;
}
}
}
- fprintf_filtered (stream, local_binary_format_suffix ());
}
/* VALADDR points to an integer of LEN bytes.
cycle = (len * BITS_IN_BYTES) % BITS_IN_OCTAL;
carry = 0;
- fprintf_filtered (stream, local_octal_format_prefix ());
+ fputs_filtered ("0", stream);
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
for (p = valaddr;
}
}
- fprintf_filtered (stream, local_octal_format_suffix ());
}
/* VALADDR points to an integer of LEN bytes.
digits[i] = 0;
}
- fprintf_filtered (stream, local_decimal_format_prefix ());
-
/* Ok, we have an unknown number of bytes of data to be printed in
* decimal.
*
fprintf_filtered (stream, "%1d", digits[i]);
}
xfree (digits);
-
- fprintf_filtered (stream, local_decimal_format_suffix ());
}
/* VALADDR points to an integer of LEN bytes. Print it in hex on stream. */
-static void
+void
print_hex_chars (struct ui_file *stream, unsigned char *valaddr, unsigned len)
{
unsigned char *p;
/* FIXME: We should be not printing leading zeroes in most cases. */
- fprintf_filtered (stream, local_hex_format_prefix ());
+ fputs_filtered ("0x", stream);
if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
{
for (p = valaddr;
fprintf_filtered (stream, "%02x", *p);
}
}
- fprintf_filtered (stream, local_hex_format_suffix ());
+}
+
+/* VALADDR points to a char integer of LEN bytes. Print it out in appropriate language form on stream.
+ Omit any leading zero chars. */
+
+void
+print_char_chars (struct ui_file *stream, unsigned char *valaddr, unsigned len)
+{
+ unsigned char *p;
+
+ if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG)
+ {
+ p = valaddr;
+ while (p < valaddr + len - 1 && *p == 0)
+ ++p;
+
+ while (p < valaddr + len)
+ {
+ LA_EMIT_CHAR (*p, stream, '\'');
+ ++p;
+ }
+ }
+ else
+ {
+ p = valaddr + len - 1;
+ while (p > valaddr && *p == 0)
+ --p;
+
+ while (p >= valaddr)
+ {
+ LA_EMIT_CHAR (*p, stream, '\'');
+ --p;
+ }
+ }
}
/* Called by various <lang>_val_print routines to print elements of an
knows what they really did here. Radix setting is confusing, e.g.
setting the input radix to "10" never changes it! */
-/* ARGSUSED */
static void
set_input_radix (char *args, int from_tty, struct cmd_list_element *c)
{
set_input_radix_1 (from_tty, input_radix);
}
-/* ARGSUSED */
static void
set_input_radix_1 (int from_tty, unsigned radix)
{
}
}
-/* ARGSUSED */
static void
set_output_radix (char *args, int from_tty, struct cmd_list_element *c)
{
/* Show both the input and output radices. */
-/*ARGSUSED */
static void
show_radix (char *arg, int from_tty)
{
}
\f
-/*ARGSUSED */
static void
set_print (char *arg, int from_tty)
{
help_list (setprintlist, "set print ", -1, gdb_stdout);
}
-/*ARGSUSED */
static void
show_print (char *args, int from_tty)
{
add_alias_cmd ("p", "print", no_class, 1, &showlist);
add_alias_cmd ("pr", "print", no_class, 1, &showlist);
- add_show_from_set
+ deprecated_add_show_from_set
(add_set_cmd ("elements", no_class, var_uinteger, (char *) &print_max,
"Set limit on string chars or array elements to print.\n\
\"set print elements 0\" causes there to be no limit.",
&setprintlist),
&showprintlist);
- add_show_from_set
+ deprecated_add_show_from_set
(add_set_cmd ("null-stop", no_class, var_boolean,
(char *) &stop_print_at_null,
"Set printing of char arrays to stop at first null char.",
&setprintlist),
&showprintlist);
- add_show_from_set
+ deprecated_add_show_from_set
(add_set_cmd ("repeats", no_class, var_uinteger,
(char *) &repeat_count_threshold,
"Set threshold for repeated print elements.\n\
&setprintlist),
&showprintlist);
- add_show_from_set
+ deprecated_add_show_from_set
(add_set_cmd ("pretty", class_support, var_boolean,
(char *) &prettyprint_structs,
"Set prettyprinting of structures.",
&setprintlist),
&showprintlist);
- add_show_from_set
+ deprecated_add_show_from_set
(add_set_cmd ("union", class_support, var_boolean, (char *) &unionprint,
"Set printing of unions interior to structures.",
&setprintlist),
&showprintlist);
- add_show_from_set
+ deprecated_add_show_from_set
(add_set_cmd ("array", class_support, var_boolean,
(char *) &prettyprint_arrays,
"Set prettyprinting of arrays.",
&setprintlist),
&showprintlist);
- add_show_from_set
+ deprecated_add_show_from_set
(add_set_cmd ("address", class_support, var_boolean, (char *) &addressprint,
"Set printing of addresses.",
&setprintlist),
(char *) &input_radix,
"Set default input radix for entering numbers.",
&setlist);
- add_show_from_set (c, &showlist);
+ deprecated_add_show_from_set (c, &showlist);
set_cmd_sfunc (c, set_input_radix);
c = add_set_cmd ("output-radix", class_support, var_uinteger,
(char *) &output_radix,
"Set default output radix for printing of values.",
&setlist);
- add_show_from_set (c, &showlist);
+ deprecated_add_show_from_set (c, &showlist);
set_cmd_sfunc (c, set_output_radix);
- /* The "set radix" and "show radix" commands are special in that they are
- like normal set and show commands but allow two normally independent
- variables to be either set or shown with a single command. So the
- usual add_set_cmd() and add_show_from_set() commands aren't really
- appropriate. */
+ /* The "set radix" and "show radix" commands are special in that
+ they are like normal set and show commands but allow two normally
+ independent variables to be either set or shown with a single
+ command. So the usual deprecated_add_set_cmd() and
+ add_show_from_set() commands aren't really appropriate. */
add_cmd ("radix", class_support, set_radix,
"Set default input and output number radices.\n\
Use 'set input-radix' or 'set output-radix' to independently set each.\n\