#include "inferior.h"
#include "gdbcore.h"
#include "regcache.h"
-#include "i387-nat.h"
+#include "i387-tdep.h"
#include "gdb_assert.h"
#include "x86-64-tdep.h"
(0 <= (regno) && (regno) < x86_64_num_gregs)
#define GETFPREGS_SUPPLIES(regno) \
(FP0_REGNUM <= (regno) && (regno) <= MXCSR_REGNUM)
-
-#define PTRACE_XFER_TYPE unsigned long
\f
/* Transfering the general-purpose registers between GDB, inferiors
for (i = 0; i < x86_64_num_gregs; i++)
if ((regno == -1 || regno == i))
- read_register_gen (i, regp + x86_64_regmap[i]);
+ read_register_gen (i, (char *) (regp + x86_64_regmap[i]));
}
/* Fetch all general-purpose registers from process/thread TID and
/* Offset to saved processor registers from <asm/ucontext.h> */
#define LINUX_UCONTEXT_SIGCONTEXT_OFFSET (36)
-/* Resume execution of the inferior process.
- If STEP is nonzero, single-step it.
- If SIGNAL is nonzero, give it that signal. */
-
-void
-child_resume (ptid_t ptid, int step, enum target_signal signal)
-{
- int pid = PIDGET (ptid);
- int request = PTRACE_CONT;
-
- if (pid == -1)
- /* Resume all threads. */
- /* I think this only gets used in the non-threaded case, where "resume
- all threads" and "resume inferior_ptid" are the same. */
- pid = PIDGET (inferior_ptid);
-
- if (step)
- {
- CORE_ADDR pc = read_pc_pid (pid_to_ptid (pid));
- unsigned char buf[LINUX_SYSCALL_LEN];
-
- request = PTRACE_SINGLESTEP;
-
- /* Returning from a signal trampoline is done by calling a
- special system call (sigreturn or rt_sigreturn, see
- i386-linux-tdep.c for more information). This system call
- restores the registers that were saved when the signal was
- raised, including %eflags. That means that single-stepping
- won't work. Instead, we'll have to modify the signal context
- that's about to be restored, and set the trace flag there. */
-
- /* First check if PC is at a system call. */
- if (read_memory_nobpt (pc, (char *) buf, LINUX_SYSCALL_LEN) == 0
- && memcmp (buf, linux_syscall, LINUX_SYSCALL_LEN) == 0)
- {
- int syscall =
- read_register_pid (LINUX_SYSCALL_REGNUM, pid_to_ptid (pid));
-
- /* Then check the system call number. */
- if (syscall == SYS_rt_sigreturn)
- {
- CORE_ADDR sp = read_register (SP_REGNUM);
- CORE_ADDR addr = sp;
- unsigned long int eflags;
-
- addr +=
- sizeof (struct siginfo) + LINUX_UCONTEXT_SIGCONTEXT_OFFSET;
-
- /* Set the trace flag in the context that's about to be
- restored. */
- addr += LINUX_SIGCONTEXT_EFLAGS_OFFSET;
- read_memory (addr, (char *) &eflags, 8);
- eflags |= 0x0100;
- write_memory (addr, (char *) &eflags, 8);
- }
- }
- }
-
- if (ptrace (request, pid, 0, target_signal_to_host (signal)) == -1)
- perror_with_name ("ptrace");
-}
-\f
-
-/* Copy LEN bytes to or from inferior's memory starting at MEMADDR
- to debugger memory starting at MYADDR. Copy to inferior if
- WRITE is nonzero. TARGET is ignored.
-
- Returns the length copied, which is either the LEN argument or zero.
- This xfer function does not do partial moves, since child_ops
- doesn't allow memory operations to cross below us in the target stack
- anyway. */
-
-int
-child_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write,
- struct mem_attrib *attrib, struct target_ops *target)
-{
- register int i;
- /* Round starting address down to longword boundary. */
- register CORE_ADDR addr = memaddr & -sizeof (PTRACE_XFER_TYPE);
- /* Round ending address up; get number of longwords that makes. */
- register int count
- = (((memaddr + len) - addr) + sizeof (PTRACE_XFER_TYPE) - 1)
- / sizeof (PTRACE_XFER_TYPE);
- /* Allocate buffer of that many longwords. */
- /* FIXME (alloca): This code, cloned from infptrace.c, is unsafe
- because it uses alloca to allocate a buffer of arbitrary size.
- For very large xfers, this could crash GDB's stack. */
- register PTRACE_XFER_TYPE *buffer
- = (PTRACE_XFER_TYPE *) alloca (count * sizeof (PTRACE_XFER_TYPE));
-
- if (write)
- {
- /* Fill start and end extra bytes of buffer with existing memory data. */
- if (addr != memaddr || len < (int) sizeof (PTRACE_XFER_TYPE))
- {
- /* Need part of initial word -- fetch it. */
- buffer[0] = ptrace (PT_READ_I, PIDGET (inferior_ptid),
- (PTRACE_ARG3_TYPE) addr, 0);
- }
-
- if (count > 1) /* FIXME, avoid if even boundary */
- {
- buffer[count - 1] = ptrace (PT_READ_I, PIDGET (inferior_ptid),
- ((PTRACE_ARG3_TYPE)
- (addr +
- (count -
- 1) * sizeof (PTRACE_XFER_TYPE))), 0);
- }
-
- /* Copy data to be written over corresponding part of buffer */
-
- memcpy ((char *) buffer + (memaddr & (sizeof (PTRACE_XFER_TYPE) - 1)),
- myaddr, len);
-
- /* Write the entire buffer. */
-
- for (i = 0; i < count; i++, addr += sizeof (PTRACE_XFER_TYPE))
- {
- errno = 0;
- ptrace (PT_WRITE_D, PIDGET (inferior_ptid),
- (PTRACE_ARG3_TYPE) addr, buffer[i]);
- if (errno)
- {
- /* Using the appropriate one (I or D) is necessary for
- Gould NP1, at least. */
- errno = 0;
- ptrace (PT_WRITE_I, PIDGET (inferior_ptid),
- (PTRACE_ARG3_TYPE) addr, buffer[i]);
- }
- if (errno)
- return 0;
- }
-#ifdef CLEAR_INSN_CACHE
- CLEAR_INSN_CACHE ();
-#endif
- }
- else
- {
- /* Read all the longwords */
- for (i = 0; i < count; i++, addr += sizeof (PTRACE_XFER_TYPE))
- {
- errno = 0;
- buffer[i] = ptrace (PT_READ_I, PIDGET (inferior_ptid),
- (PTRACE_ARG3_TYPE) addr, 0);
- if (errno)
- return 0;
- }
-
- /* Copy appropriate bytes out of the buffer. */
- memcpy (myaddr,
- (char *) buffer + (memaddr & (sizeof (PTRACE_XFER_TYPE) - 1)),
- len);
- }
- return len;
-}
-
/* Interpreting register set info found in core files. */
-
/* Provide registers to GDB from a core file.
CORE_REG_SECT points to an array of bytes, which are the contents
#define offsetof(TYPE, MEMBER) ((unsigned long) &((TYPE *)0)->MEMBER)
#endif
-/* Record the value of the debug control register. */
-static long debug_control_mirror;
-
-/* Record which address associates with which register. */
-static CORE_ADDR address_lookup[DR_LASTADDR - DR_FIRSTADDR + 1];
-
/* Return the address of register REGNUM. BLOCKEND is the value of
u.u_ar0, which should point to the registers. */
CORE_ADDR
{
add_core_fns (&linux_elf_core_fns);
}
+
+int
+kernel_u_size (void)
+{
+ return (sizeof (struct user));
+}
projects / deliverable / binutils-gdb.git / blobdiff