/* Read AIX xcoff symbol tables and convert to internal format, for GDB.
- Copyright (C) 1986-2015 Free Software Foundation, Inc.
+ Copyright (C) 1986-2017 Free Software Foundation, Inc.
Derived from coffread.c, dbxread.c, and a lot of hacking.
Contributed by IBM Corporation.
{ ".dwabrev", NULL },
{ ".dwline", NULL },
{ ".dwloc", NULL },
+ { NULL, NULL }, /* debug_loclists */
/* AIX XCOFF defines one, named DWARF section for macro debug information.
XLC does not generate debug_macinfo for DWARF4 and below.
The section is assigned to debug_macro for DWARF5 and above. */
{ NULL, NULL },
{ ".dwmac", NULL },
{ ".dwstr", NULL },
+ { NULL, NULL }, /* debug_line_str */
{ ".dwrnges", NULL },
+ { NULL, NULL }, /* debug_rnglists */
{ ".dwpbtyp", NULL },
{ NULL, NULL }, /* debug_addr */
{ ".dwframe", NULL },
_("Mismatched .eb symbol ignored starting at symnum %d"), arg1);
}
-static void xcoff_initial_scan (struct objfile *, int);
+static void xcoff_initial_scan (struct objfile *, symfile_add_flags);
-static void scan_xcoff_symtab (struct objfile *);
+static void scan_xcoff_symtab (minimal_symbol_reader &,
+ struct objfile *);
-static char *xcoff_next_symbol_text (struct objfile *);
+static const char *xcoff_next_symbol_text (struct objfile *);
static void record_include_begin (struct coff_symbol *);
/* Pick a fake name that will produce the same results as this
one when passed to deduce_language_from_filename. Kludge on
top of kludge. */
- char *fakename = strrchr (inclTable[ii].name, '.');
+ const char *fakename = strrchr (inclTable[ii].name, '.');
if (fakename == NULL)
fakename = " ?";
This function can read past the end of the symbol table
(into the string table) but this does no harm. */
-/* Create a new minimal symbol (using prim_record_minimal_symbol_and_info).
+/* Create a new minimal symbol (using record_with_info).
Creation of all new minimal symbols should go through this function
- rather than calling the various prim_record_[...] functions in order
+ rather than calling the various record functions in order
to make sure that all symbol addresses get properly relocated.
Arguments are:
OBJFILE - the objfile associated with the minimal symbol. */
static void
-record_minimal_symbol (const char *name, CORE_ADDR address,
+record_minimal_symbol (minimal_symbol_reader &reader,
+ const char *name, CORE_ADDR address,
enum minimal_symbol_type ms_type,
int n_scnum,
struct objfile *objfile)
{
- int section = secnum_to_section (n_scnum, objfile);
-
if (name[0] == '.')
++name;
- prim_record_minimal_symbol_and_info (name, address, ms_type,
- secnum_to_section (n_scnum, objfile),
- objfile);
+ reader.record_with_info (name, address, ms_type,
+ secnum_to_section (n_scnum, objfile));
}
/* xcoff has static blocks marked in `.bs', `.es' pairs. They cannot be
/* This is the function which stabsread.c calls to get symbol
continuations. */
-static char *
+static const char *
xcoff_next_symbol_text (struct objfile *objfile)
{
struct internal_syment symbol;
- char *retval;
+ const char *retval;
/* FIXME: is this the same as the passed arg? */
if (this_symtab_objfile)
union internal_auxent fcn_aux_saved = main_aux;
struct context_stack *newobj;
- char *filestring = " _start_ "; /* Name of the current file. */
+ const char *filestring = pst->filename; /* Name of the current file. */
const char *last_csect_name; /* Last seen csect's name. */
/* Done with all files, everything from here on is globals. */
}
- if ((cs->c_sclass == C_EXT || cs->c_sclass == C_HIDEXT)
- && cs->c_naux == 1)
+ if (cs->c_sclass == C_EXT || cs->c_sclass == C_HIDEXT ||
+ cs->c_sclass == C_WEAKEXT)
{
/* Dealing with a symbol with a csect entry. */
#define CSECT_SMTYP(PP) (SMTYP_SMTYP(CSECT(PP).x_smtyp))
#define CSECT_SCLAS(PP) (CSECT(PP).x_smclas)
- /* Convert the auxent to something we can access. */
- bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
- 0, cs->c_naux, &main_aux);
+ /* Convert the auxent to something we can access.
+ XCOFF can have more than one auxiliary entries.
+
+ Actual functions will have two auxiliary entries, one to have the
+ function size and other to have the smtype/smclass (LD/PR).
+
+ c_type value of main symbol table will be set only in case of
+ C_EXT/C_HIDEEXT/C_WEAKEXT storage class symbols.
+ Bit 10 of type is set if symbol is a function, ie the value is set
+ to 32(0x20). So we need to read the first function auxiliay entry
+ which contains the size. */
+ if (cs->c_naux > 1 && ISFCN (cs->c_type))
+ {
+ /* a function entry point. */
+
+ fcn_start_addr = cs->c_value;
+
+ /* save the function header info, which will be used
+ when `.bf' is seen. */
+ fcn_cs_saved = *cs;
+
+ /* Convert the auxent to something we can access. */
+ bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
+ 0, cs->c_naux, &fcn_aux_saved);
+ continue;
+ }
+ /* Read the csect auxiliary header, which is always the last by
+ onvention. */
+ bfd_coff_swap_aux_in (abfd,
+ raw_auxptr
+ + ((coff_data (abfd)->local_symesz)
+ * (cs->c_naux - 1)),
+ cs->c_type, cs->c_sclass,
+ cs->c_naux - 1, cs->c_naux,
+ &main_aux);
switch (CSECT_SMTYP (&main_aux))
{
switch (CSECT_SCLAS (&main_aux))
{
+ /* We never really come to this part as this case has been
+ handled in ISFCN check above.
+ This and other cases of XTY_LD are kept just for
+ reference. */
case XMC_PR:
- /* a function entry point. */
- function_entry_point:
-
- fcn_start_addr = cs->c_value;
-
- /* save the function header info, which will be used
- when `.bf' is seen. */
- fcn_cs_saved = *cs;
- fcn_aux_saved = main_aux;
continue;
case XMC_GL:
}
}
- /* If explicitly specified as a function, treat is as one. This check
- evaluates to true for @FIX* bigtoc CSECT symbols, so it must occur
- after the above CSECT check. */
- if (ISFCN (cs->c_type) && cs->c_sclass != C_TPDEF)
- {
- bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
- 0, cs->c_naux, &main_aux);
- goto function_entry_point;
- }
-
switch (cs->c_sclass)
{
case C_FILE:
SYMBOL_ACLASS_INDEX (sym) = LOC_BLOCK;
SYMBOL_DUP (sym, sym2);
- if (cs->c_sclass == C_EXT)
+ if (cs->c_sclass == C_EXT || C_WEAKEXT)
add_symbol_to_list (sym2, &global_symbols);
else if (cs->c_sclass == C_HIDEXT || cs->c_sclass == C_STAT)
add_symbol_to_list (sym2, &file_symbols);
}
static void
-scan_xcoff_symtab (struct objfile *objfile)
+scan_xcoff_symtab (minimal_symbol_reader &reader,
+ struct objfile *objfile)
{
struct gdbarch *gdbarch = get_objfile_arch (objfile);
CORE_ADDR toc_offset = 0; /* toc offset value in data section. */
const char *filestring = NULL;
const char *namestring;
- int past_first_source_file = 0;
bfd *abfd;
asection *bfd_sect;
unsigned int nsyms;
{
case C_EXT:
case C_HIDEXT:
+ case C_WEAKEXT:
{
/* The CSECT auxent--always the last auxent. */
union internal_auxent csect_aux;
if (!misc_func_recorded)
{
record_minimal_symbol
- (last_csect_name, last_csect_val,
+ (reader, last_csect_name, last_csect_val,
mst_text, last_csect_sec, objfile);
misc_func_recorded = 1;
}
table, except for section symbols. */
if (*namestring != '.')
record_minimal_symbol
- (namestring, symbol.n_value,
+ (reader, namestring, symbol.n_value,
sclass == C_HIDEXT ? mst_file_data : mst_data,
symbol.n_scnum, objfile);
break;
if (first_fun_line_offset == 0 && symbol.n_numaux > 1)
first_fun_line_offset =
main_aux[0].x_sym.x_fcnary.x_fcn.x_lnnoptr;
- {
- record_minimal_symbol
- (namestring, symbol.n_value,
- sclass == C_HIDEXT ? mst_file_text : mst_text,
- symbol.n_scnum, objfile);
- misc_func_recorded = 1;
- }
+
+ record_minimal_symbol
+ (reader, namestring, symbol.n_value,
+ sclass == C_HIDEXT ? mst_file_text : mst_text,
+ symbol.n_scnum, objfile);
+ misc_func_recorded = 1;
break;
case XMC_GL:
symbols, we will choose mst_text over
mst_solib_trampoline. */
record_minimal_symbol
- (namestring, symbol.n_value,
+ (reader, namestring, symbol.n_value,
mst_solib_trampoline, symbol.n_scnum, objfile);
misc_func_recorded = 1;
break;
XMC_BS might be possible too. */
if (*namestring != '.')
record_minimal_symbol
- (namestring, symbol.n_value,
+ (reader, namestring, symbol.n_value,
sclass == C_HIDEXT ? mst_file_data : mst_data,
symbol.n_scnum, objfile);
break;
table, except for section symbols. */
if (*namestring != '.')
record_minimal_symbol
- (namestring, symbol.n_value,
+ (reader, namestring, symbol.n_value,
sclass == C_HIDEXT ? mst_file_bss : mst_bss,
symbol.n_scnum, objfile);
break;
it as a function. This will take care of functions like
strcmp() compiled by xlc. */
- record_minimal_symbol (last_csect_name, last_csect_val,
+ record_minimal_symbol (reader, last_csect_name, last_csect_val,
mst_text, last_csect_sec, objfile);
misc_func_recorded = 1;
}
loaded). */
static void
-xcoff_initial_scan (struct objfile *objfile, int symfile_flags)
+xcoff_initial_scan (struct objfile *objfile, symfile_add_flags symfile_flags)
{
bfd *abfd;
int val;
free_pending_blocks ();
back_to = make_cleanup (really_free_pendings, 0);
- init_minimal_symbol_collection ();
- make_cleanup_discard_minimal_symbols ();
+ minimal_symbol_reader reader (objfile);
/* Now that the symbol table data of the executable file are all in core,
process them and define symbols accordingly. */
- scan_xcoff_symtab (objfile);
+ scan_xcoff_symtab (reader, objfile);
/* Install any minimal symbols that have been collected as the current
minimal symbols for this objfile. */
- install_minimal_symbols (objfile);
+ reader.install ();
/* DWARF2 sections. */