/* Read AIX xcoff symbol tables and convert to internal format, for GDB.
- Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995
- Free Software Foundation, Inc.
+ Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995,
+ 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+ Free Software Foundation, Inc.
Derived from coffread.c, dbxread.c, and a lot of hacking.
Contributed by IBM Corporation.
-This file is part of GDB.
+ This file is part of GDB.
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-
-/* Native only: Need struct tbtable in <sys/debug.h> from host, and
- need xcoff_add_toc_to_loadinfo in rs6000-tdep.c from target.
- need xcoff_init_loadinfo ditto.
- However, if you grab <sys/debug.h> and make it available on your
- host, and define FAKING_RS6000, then this code will compile. */
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330,
+ Boston, MA 02111-1307, USA. */
#include "defs.h"
#include "bfd.h"
#include <sys/types.h>
#include <fcntl.h>
#include <ctype.h>
-#include <string.h>
+#include "gdb_string.h"
-#include "obstack.h"
#include <sys/param.h>
#ifndef NO_SYS_FILE
#include <sys/file.h>
#endif
-#include <sys/stat.h>
-#include <sys/debug.h>
+#include "gdb_stat.h"
-#include "coff/internal.h" /* FIXME, internal data from BFD */
+#include "coff/internal.h"
#include "libcoff.h" /* FIXME, internal data from BFD */
-#include "coff/rs6000.h" /* FIXME, raw file-format guts of xcoff */
+#include "coff/xcoff.h"
+#include "libxcoff.h"
+#include "coff/rs6000.h"
#include "symtab.h"
#include "gdbtypes.h"
+/* FIXME: ezannoni/2004-02-13 Verify if the include below is really needed. */
#include "symfile.h"
#include "objfiles.h"
#include "buildsym.h"
#include "stabsread.h"
+#include "expression.h"
#include "complaints.h"
#include "gdb-stabs.h"
/* For interface with stabsread.c. */
#include "aout/stab_gnu.h"
-/* Simplified internal version of coff symbol table information */
+\f
+/* We put a pointer to this structure in the read_symtab_private field
+ of the psymtab. */
-struct coff_symbol {
- char *c_name;
- int c_symnum; /* symbol number of this entry */
- int c_naux; /* 0 if syment only, 1 if syment + auxent */
- long c_value;
- unsigned char c_sclass;
- int c_secnum;
- unsigned int c_type;
-};
+struct symloc
+ {
+
+ /* First symbol number for this file. */
+
+ int first_symnum;
+
+ /* Number of symbols in the section of the symbol table devoted to
+ this file's symbols (actually, the section bracketed may contain
+ more than just this file's symbols). If numsyms is 0, the only
+ reason for this thing's existence is the dependency list. Nothing
+ else will happen when it is read in. */
-/* The COFF line table, in raw form. */
-static char *linetab = NULL; /* Its actual contents */
-static long linetab_offset; /* Its offset in the file */
-static unsigned long linetab_size; /* Its size */
+ int numsyms;
+
+ /* Position of the start of the line number information for this psymtab. */
+ unsigned int lineno_off;
+ };
+
+/* Remember what we deduced to be the source language of this psymtab. */
+
+static enum language psymtab_language = language_unknown;
+\f
+
+/* Simplified internal version of coff symbol table information */
+
+struct coff_symbol
+ {
+ char *c_name;
+ int c_symnum; /* symbol number of this entry */
+ int c_naux; /* 0 if syment only, 1 if syment + auxent */
+ long c_value;
+ unsigned char c_sclass;
+ int c_secnum;
+ unsigned int c_type;
+ };
/* last function's saved coff symbol `cs' */
static CORE_ADDR first_object_file_end;
-/* pointer to the string table */
-static char *strtbl;
-
-/* length of the string table */
-static int strtbl_len;
-
-/* pointer to debug section */
-static char *debugsec;
-
-/* pointer to the a.out symbol table */
-static char *symtbl;
-
-/* Number of symbols in symtbl. */
-static int symtbl_num_syms;
-
/* initial symbol-table-debug-string vector length */
#define INITIAL_STABVECTOR_LENGTH 40
int within_function;
-/* Local variables that hold the shift and mask values for the
- COFF file that we are currently reading. These come back to us
- from BFD, and are referenced by their macro names, as well as
- internally to the BTYPE, ISPTR, ISFCN, ISARY, ISTAG, and DECREF
- macros from ../internalcoff.h . */
-
-static unsigned local_n_btshft;
-static unsigned local_n_tmask;
-
-#undef N_BTSHFT
-#define N_BTSHFT local_n_btshft
-#undef N_TMASK
-#define N_TMASK local_n_tmask
-
-/* Local variables that hold the sizes in the file of various COFF structures.
- (We only need to know this to read them from the file -- BFD will then
- translate the data in them, into `internal_xxx' structs in the right
- byte order, alignment, etc.) */
-
-static unsigned local_symesz;
-
-struct coff_symfile_info {
- file_ptr min_lineno_offset; /* Where in file lowest line#s are */
- file_ptr max_lineno_offset; /* 1+last byte of line#s in file */
-};
-
-static struct complaint rsym_complaint =
- {"Non-stab C_RSYM `%s' needs special handling", 0, 0};
+/* Size of a COFF symbol. I think it is always 18, so I'm not sure
+ there is any reason not to just use a #define, but might as well
+ ask BFD for the size and store it here, I guess. */
-static struct complaint storclass_complaint =
- {"Unexpected storage class: %d", 0, 0};
+static unsigned local_symesz;
-static struct complaint bf_notfound_complaint =
- {"line numbers off, `.bf' symbol not found", 0, 0};
+struct coff_symfile_info
+ {
+ file_ptr min_lineno_offset; /* Where in file lowest line#s are */
+ file_ptr max_lineno_offset; /* 1+last byte of line#s in file */
-extern struct complaint ef_complaint;
-extern struct complaint eb_complaint;
+ /* Pointer to the string table. */
+ char *strtbl;
-static void
-enter_line_range PARAMS ((struct subfile *, unsigned, unsigned,
- CORE_ADDR, CORE_ADDR, unsigned *));
+ /* Pointer to debug section. */
+ char *debugsec;
-static void
-free_debugsection PARAMS ((void));
+ /* Pointer to the a.out symbol table. */
+ char *symtbl;
-static int
-init_debugsection PARAMS ((bfd *));
+ /* Number of symbols in symtbl. */
+ int symtbl_num_syms;
-static int
-init_stringtab PARAMS ((bfd *, file_ptr, struct objfile *));
+ /* Offset in data section to TOC anchor. */
+ CORE_ADDR toc_offset;
+ };
static void
-xcoff_symfile_init PARAMS ((struct objfile *));
+bf_notfound_complaint (void)
+{
+ complaint (&symfile_complaints, "line numbers off, `.bf' symbol not found");
+}
static void
-xcoff_new_init PARAMS ((struct objfile *));
+ef_complaint (int arg1)
+{
+ complaint (&symfile_complaints,
+ "Mismatched .ef symbol ignored starting at symnum %d", arg1);
+}
static void
-xcoff_symfile_read PARAMS ((struct objfile *, struct section_offsets *, int));
+eb_complaint (int arg1)
+{
+ complaint (&symfile_complaints,
+ "Mismatched .eb symbol ignored starting at symnum %d", arg1);
+}
-static void
-xcoff_symfile_finish PARAMS ((struct objfile *));
+static void xcoff_initial_scan (struct objfile *, int);
-static struct section_offsets *
-xcoff_symfile_offsets PARAMS ((struct objfile *, CORE_ADDR));
+static void scan_xcoff_symtab (struct objfile *);
-static int
-init_lineno PARAMS ((bfd *, file_ptr, int));
+static char *xcoff_next_symbol_text (struct objfile *);
-static void
-free_linetab PARAMS ((void));
+static void record_include_begin (struct coff_symbol *);
static void
-find_linenos PARAMS ((bfd *, sec_ptr, PTR));
+enter_line_range (struct subfile *, unsigned, unsigned,
+ CORE_ADDR, CORE_ADDR, unsigned *);
-static char *
-coff_getfilename PARAMS ((union internal_auxent *));
+static void init_stringtab (bfd *, file_ptr, struct objfile *);
-static void
-read_symbol PARAMS ((struct internal_syment *, int));
+static void xcoff_symfile_init (struct objfile *);
-static int
-read_symbol_lineno PARAMS ((int));
+static void xcoff_new_init (struct objfile *);
-static int
-read_symbol_nvalue PARAMS ((int));
+static void xcoff_symfile_finish (struct objfile *);
-static struct symbol *
-process_xcoff_symbol PARAMS ((struct coff_symbol *, struct objfile *));
+static void xcoff_symfile_offsets (struct objfile *,
+ struct section_addr_info *addrs);
-static void
-read_xcoff_symtab PARAMS ((struct objfile *, int));
+static char *coff_getfilename (union internal_auxent *, struct objfile *);
-static void
-add_stab_to_list PARAMS ((char *, struct pending_stabs **));
+static void read_symbol (struct internal_syment *, int);
+
+static int read_symbol_lineno (int);
+
+static CORE_ADDR read_symbol_nvalue (int);
+
+static struct symbol *process_xcoff_symbol (struct coff_symbol *,
+ struct objfile *);
+
+static void read_xcoff_symtab (struct partial_symtab *);
+#if 0
+static void add_stab_to_list (char *, struct pending_stabs **);
+#endif
+
+static int compare_lte (const void *, const void *);
+
+static struct linetable *arrange_linetable (struct linetable *);
+
+static void record_include_end (struct coff_symbol *);
+
+static void process_linenos (CORE_ADDR, CORE_ADDR);
\f
-/* Return the section_offsets* that CS points to. */
-static int cs_to_section PARAMS ((struct coff_symbol *, struct objfile *));
-struct find_targ_sec_arg {
- int targ_index;
- int *resultp;
-};
+/* Translate from a COFF section number (target_index) to a SECT_OFF_*
+ code. */
+static int secnum_to_section (int, struct objfile *);
+static asection *secnum_to_bfd_section (int, struct objfile *);
+
+struct find_targ_sec_arg
+ {
+ int targ_index;
+ int *resultp;
+ asection **bfd_sect;
+ struct objfile *objfile;
+ };
-static void find_targ_sec PARAMS ((bfd *, asection *, void *));
+static void find_targ_sec (bfd *, asection *, void *);
-static void find_targ_sec (abfd, sect, obj)
- bfd *abfd;
- asection *sect;
- PTR obj;
+static void
+find_targ_sec (bfd *abfd, asection *sect, void *obj)
{
- struct find_targ_sec_arg *args = (struct find_targ_sec_arg *)obj;
+ struct find_targ_sec_arg *args = (struct find_targ_sec_arg *) obj;
+ struct objfile *objfile = args->objfile;
if (sect->target_index == args->targ_index)
{
/* This is the section. Figure out what SECT_OFF_* code it is. */
if (bfd_get_section_flags (abfd, sect) & SEC_CODE)
- *args->resultp = SECT_OFF_TEXT;
+ *args->resultp = SECT_OFF_TEXT (objfile);
else if (bfd_get_section_flags (abfd, sect) & SEC_LOAD)
- *args->resultp = SECT_OFF_DATA;
+ *args->resultp = SECT_OFF_DATA (objfile);
else
- *args->resultp = SECT_OFF_BSS;
+ *args->resultp = sect->index;
+ *args->bfd_sect = sect;
}
}
/* Return the section number (SECT_OFF_*) that CS points to. */
static int
-cs_to_section (cs, objfile)
- struct coff_symbol *cs;
- struct objfile *objfile;
+secnum_to_section (int secnum, struct objfile *objfile)
{
- int off = SECT_OFF_TEXT;
+ int off = SECT_OFF_TEXT (objfile);
+ asection *sect = NULL;
struct find_targ_sec_arg args;
- args.targ_index = cs->c_secnum;
+ args.targ_index = secnum;
args.resultp = &off;
+ args.bfd_sect = §
+ args.objfile = objfile;
bfd_map_over_sections (objfile->obfd, find_targ_sec, &args);
return off;
}
+
+/* Return the BFD section that CS points to. */
+static asection *
+secnum_to_bfd_section (int secnum, struct objfile *objfile)
+{
+ int off = SECT_OFF_TEXT (objfile);
+ asection *sect = NULL;
+ struct find_targ_sec_arg args;
+ args.targ_index = secnum;
+ args.resultp = &off;
+ args.bfd_sect = §
+ args.objfile = objfile;
+ bfd_map_over_sections (objfile->obfd, find_targ_sec, &args);
+ return sect;
+}
\f
/* add a given stab string into given stab vector. */
+#if 0
+
static void
-add_stab_to_list (stabname, stabvector)
-char *stabname;
-struct pending_stabs **stabvector;
+add_stab_to_list (char *stabname, struct pending_stabs **stabvector)
{
- if ( *stabvector == NULL) {
- *stabvector = (struct pending_stabs *)
- xmalloc (sizeof (struct pending_stabs) +
- INITIAL_STABVECTOR_LENGTH * sizeof (char*));
- (*stabvector)->count = 0;
- (*stabvector)->length = INITIAL_STABVECTOR_LENGTH;
- }
- else if ((*stabvector)->count >= (*stabvector)->length) {
- (*stabvector)->length += INITIAL_STABVECTOR_LENGTH;
- *stabvector = (struct pending_stabs *)
- xrealloc ((char *) *stabvector, sizeof (struct pending_stabs) +
- (*stabvector)->length * sizeof (char*));
- }
- (*stabvector)->stab [(*stabvector)->count++] = stabname;
+ if (*stabvector == NULL)
+ {
+ *stabvector = (struct pending_stabs *)
+ xmalloc (sizeof (struct pending_stabs) +
+ INITIAL_STABVECTOR_LENGTH * sizeof (char *));
+ (*stabvector)->count = 0;
+ (*stabvector)->length = INITIAL_STABVECTOR_LENGTH;
+ }
+ else if ((*stabvector)->count >= (*stabvector)->length)
+ {
+ (*stabvector)->length += INITIAL_STABVECTOR_LENGTH;
+ *stabvector = (struct pending_stabs *)
+ xrealloc ((char *) *stabvector, sizeof (struct pending_stabs) +
+ (*stabvector)->length * sizeof (char *));
+ }
+ (*stabvector)->stab[(*stabvector)->count++] = stabname;
}
-\f
+
+#endif
+\f/* *INDENT-OFF* */
/* Linenos are processed on a file-by-file basis.
Two reasons:
- 1) xlc (IBM's native c compiler) postpones static function code
- emission to the end of a compilation unit. This way it can
- determine if those functions (statics) are needed or not, and
- can do some garbage collection (I think). This makes line
- numbers and corresponding addresses unordered, and we end up
- with a line table like:
-
-
- lineno addr
- foo() 10 0x100
- 20 0x200
- 30 0x300
-
- foo3() 70 0x400
- 80 0x500
- 90 0x600
-
- static foo2()
- 40 0x700
- 50 0x800
- 60 0x900
-
- and that breaks gdb's binary search on line numbers, if the
- above table is not sorted on line numbers. And that sort
- should be on function based, since gcc can emit line numbers
- like:
-
- 10 0x100 - for the init/test part of a for stmt.
- 20 0x200
- 30 0x300
- 10 0x400 - for the increment part of a for stmt.
-
- arrange_linetable() will do this sorting.
-
- 2) aix symbol table might look like:
-
- c_file // beginning of a new file
- .bi // beginning of include file
- .ei // end of include file
- .bi
- .ei
-
- basically, .bi/.ei pairs do not necessarily encapsulate
- their scope. They need to be recorded, and processed later
- on when we come the end of the compilation unit.
- Include table (inclTable) and process_linenos() handle
- that. */
+ 1) xlc (IBM's native c compiler) postpones static function code
+ emission to the end of a compilation unit. This way it can
+ determine if those functions (statics) are needed or not, and
+ can do some garbage collection (I think). This makes line
+ numbers and corresponding addresses unordered, and we end up
+ with a line table like:
+
+
+ lineno addr
+ foo() 10 0x100
+ 20 0x200
+ 30 0x300
+
+ foo3() 70 0x400
+ 80 0x500
+ 90 0x600
+
+ static foo2()
+ 40 0x700
+ 50 0x800
+ 60 0x900
+
+ and that breaks gdb's binary search on line numbers, if the
+ above table is not sorted on line numbers. And that sort
+ should be on function based, since gcc can emit line numbers
+ like:
+
+ 10 0x100 - for the init/test part of a for stmt.
+ 20 0x200
+ 30 0x300
+ 10 0x400 - for the increment part of a for stmt.
+
+ arrange_linetable() will do this sorting.
+
+ 2) aix symbol table might look like:
+
+ c_file // beginning of a new file
+ .bi // beginning of include file
+ .ei // end of include file
+ .bi
+ .ei
+
+ basically, .bi/.ei pairs do not necessarily encapsulate
+ their scope. They need to be recorded, and processed later
+ on when we come the end of the compilation unit.
+ Include table (inclTable) and process_linenos() handle
+ that. */
+/* *INDENT-ON* */
+
+
/* compare line table entry addresses. */
static int
-compare_lte (lte1, lte2)
- struct linetable_entry *lte1, *lte2;
+compare_lte (const void *lte1p, const void *lte2p)
{
+ struct linetable_entry *lte1 = (struct linetable_entry *) lte1p;
+ struct linetable_entry *lte2 = (struct linetable_entry *) lte2p;
return lte1->pc - lte2->pc;
}
-/* Give a line table with function entries are marked, arrange its functions
- in assending order and strip off function entry markers and return it in
+/* Given a line table with function entries are marked, arrange its functions
+ in ascending order and strip off function entry markers and return it in
a newly created table. If the old one is good enough, return the old one. */
/* FIXME: I think all this stuff can be replaced by just passing
sort_linevec = 1 to end_symtab. */
static struct linetable *
-arrange_linetable (oldLineTb)
- struct linetable *oldLineTb; /* old linetable */
+arrange_linetable (struct linetable *oldLineTb)
{
- int ii, jj,
- newline, /* new line count */
- function_count; /* # of functions */
+ int ii, jj, newline, /* new line count */
+ function_count; /* # of functions */
- struct linetable_entry *fentry; /* function entry vector */
- int fentry_size; /* # of function entries */
- struct linetable *newLineTb; /* new line table */
+ struct linetable_entry *fentry; /* function entry vector */
+ int fentry_size; /* # of function entries */
+ struct linetable *newLineTb; /* new line table */
#define NUM_OF_FUNCTIONS 20
fentry_size = NUM_OF_FUNCTIONS;
- fentry = (struct linetable_entry*)
+ fentry = (struct linetable_entry *)
xmalloc (fentry_size * sizeof (struct linetable_entry));
- for (function_count=0, ii=0; ii <oldLineTb->nitems; ++ii) {
+ for (function_count = 0, ii = 0; ii < oldLineTb->nitems; ++ii)
+ {
- if (oldLineTb->item[ii].line == 0) { /* function entry found. */
+ if (oldLineTb->item[ii].line == 0)
+ { /* function entry found. */
- if (function_count >= fentry_size) { /* make sure you have room. */
- fentry_size *= 2;
- fentry = (struct linetable_entry*)
- xrealloc (fentry, fentry_size * sizeof (struct linetable_entry));
- }
- fentry[function_count].line = ii;
- fentry[function_count].pc = oldLineTb->item[ii].pc;
- ++function_count;
+ if (function_count >= fentry_size)
+ { /* make sure you have room. */
+ fentry_size *= 2;
+ fentry = (struct linetable_entry *)
+ xrealloc (fentry, fentry_size * sizeof (struct linetable_entry));
+ }
+ fentry[function_count].line = ii;
+ fentry[function_count].pc = oldLineTb->item[ii].pc;
+ ++function_count;
+ }
}
- }
- if (function_count == 0) {
- free (fentry);
- return oldLineTb;
- }
+ if (function_count == 0)
+ {
+ xfree (fentry);
+ return oldLineTb;
+ }
else if (function_count > 1)
- qsort (fentry, function_count, sizeof(struct linetable_entry), compare_lte);
+ qsort (fentry, function_count, sizeof (struct linetable_entry), compare_lte);
/* allocate a new line table. */
newLineTb = (struct linetable *)
xmalloc
- (sizeof (struct linetable) +
- (oldLineTb->nitems - function_count) * sizeof (struct linetable_entry));
+ (sizeof (struct linetable) +
+ (oldLineTb->nitems - function_count) * sizeof (struct linetable_entry));
/* if line table does not start with a function beginning, copy up until
a function begin. */
newline = 0;
if (oldLineTb->item[0].line != 0)
- for (newline=0;
- newline < oldLineTb->nitems && oldLineTb->item[newline].line; ++newline)
+ for (newline = 0;
+ newline < oldLineTb->nitems && oldLineTb->item[newline].line; ++newline)
newLineTb->item[newline] = oldLineTb->item[newline];
/* Now copy function lines one by one. */
- for (ii=0; ii < function_count; ++ii) {
- for (jj = fentry[ii].line + 1;
- jj < oldLineTb->nitems && oldLineTb->item[jj].line != 0;
- ++jj, ++newline)
- newLineTb->item[newline] = oldLineTb->item[jj];
- }
- free (fentry);
+ for (ii = 0; ii < function_count; ++ii)
+ {
+ for (jj = fentry[ii].line + 1;
+ jj < oldLineTb->nitems && oldLineTb->item[jj].line != 0;
+ ++jj, ++newline)
+ newLineTb->item[newline] = oldLineTb->item[jj];
+ }
+ xfree (fentry);
newLineTb->nitems = oldLineTb->nitems - function_count;
- return newLineTb;
-}
-
-
-
-/* We try to detect the beginning of a compilation unit. That info will
- be used as an entry in line number recording routines (enter_line_range) */
-
-static unsigned first_fun_line_offset;
-static unsigned first_fun_bf;
-
-#define mark_first_line(OFFSET, SYMNUM) \
- if (!first_fun_line_offset) { \
- first_fun_line_offset = OFFSET; \
- first_fun_bf = SYMNUM; \
- }
-
+ return newLineTb;
+}
/* include file support: C_BINCL/C_EINCL pairs will be kept in the
following `IncludeChain'. At the end of each symtab (end_symtab),
represent if (the include files. */
-typedef struct _inclTable {
- char *name; /* include filename */
+typedef struct _inclTable
+{
+ char *name; /* include filename */
/* Offsets to the line table. end points to the last entry which is
part of this include file. */
- int begin, end;
-
+ int begin, end;
+
struct subfile *subfile;
- unsigned funStartLine; /* start line # of its function */
-} InclTable;
+ unsigned funStartLine; /* start line # of its function */
+}
+InclTable;
#define INITIAL_INCLUDE_TABLE_LENGTH 20
-static InclTable *inclTable; /* global include table */
-static int inclIndx; /* last entry to table */
-static int inclLength; /* table length */
-static int inclDepth; /* nested include depth */
+static InclTable *inclTable; /* global include table */
+static int inclIndx; /* last entry to table */
+static int inclLength; /* table length */
+static int inclDepth; /* nested include depth */
-static void allocate_include_entry PARAMS ((void));
+static void allocate_include_entry (void);
static void
-record_include_begin (cs)
-struct coff_symbol *cs;
+record_include_begin (struct coff_symbol *cs)
{
if (inclDepth)
{
/* In xcoff, we assume include files cannot be nested (not in .c files
- of course, but in corresponding .s files.). */
+ of course, but in corresponding .s files.). */
/* This can happen with old versions of GCC.
- GCC 2.3.3-930426 does not exhibit this on a test case which
- a user said produced the message for him. */
- static struct complaint msg = {"Nested C_BINCL symbols", 0, 0};
- complain (&msg);
+ GCC 2.3.3-930426 does not exhibit this on a test case which
+ a user said produced the message for him. */
+ complaint (&symfile_complaints, "Nested C_BINCL symbols");
}
++inclDepth;
allocate_include_entry ();
- inclTable [inclIndx].name = cs->c_name;
- inclTable [inclIndx].begin = cs->c_value;
+ inclTable[inclIndx].name = cs->c_name;
+ inclTable[inclIndx].begin = cs->c_value;
}
static void
-record_include_end (cs)
-struct coff_symbol *cs;
+record_include_end (struct coff_symbol *cs)
{
- InclTable *pTbl;
+ InclTable *pTbl;
if (inclDepth == 0)
{
- static struct complaint msg = {"Mismatched C_BINCL/C_EINCL pair", 0, 0};
- complain (&msg);
+ complaint (&symfile_complaints, "Mismatched C_BINCL/C_EINCL pair");
}
allocate_include_entry ();
- pTbl = &inclTable [inclIndx];
+ pTbl = &inclTable[inclIndx];
pTbl->end = cs->c_value;
--inclDepth;
}
static void
-allocate_include_entry ()
+allocate_include_entry (void)
{
if (inclTable == NULL)
{
- inclTable = (InclTable *)
+ inclTable = (InclTable *)
xmalloc (sizeof (InclTable) * INITIAL_INCLUDE_TABLE_LENGTH);
memset (inclTable,
'\0', sizeof (InclTable) * INITIAL_INCLUDE_TABLE_LENGTH);
else if (inclIndx >= inclLength)
{
inclLength += INITIAL_INCLUDE_TABLE_LENGTH;
- inclTable = (InclTable *)
+ inclTable = (InclTable *)
xrealloc (inclTable, sizeof (InclTable) * inclLength);
- memset (inclTable + inclLength - INITIAL_INCLUDE_TABLE_LENGTH,
- '\0', sizeof (InclTable)*INITIAL_INCLUDE_TABLE_LENGTH);
+ memset (inclTable + inclLength - INITIAL_INCLUDE_TABLE_LENGTH,
+ '\0', sizeof (InclTable) * INITIAL_INCLUDE_TABLE_LENGTH);
}
}
+/* Global variable to pass the psymtab down to all the routines involved
+ in psymtab to symtab processing. */
+static struct partial_symtab *this_symtab_psymtab;
+
/* given the start and end addresses of a compilation unit (or a csect,
at times) process its lines and create appropriate line vectors. */
static void
-process_linenos (start, end)
- CORE_ADDR start, end;
+process_linenos (CORE_ADDR start, CORE_ADDR end)
{
- char *pp;
int offset, ii;
+ file_ptr max_offset =
+ ((struct coff_symfile_info *) this_symtab_psymtab->objfile->sym_private)
+ ->max_lineno_offset;
/* subfile structure for the main compilation unit. */
struct subfile main_subfile;
All the following line numbers in the function are relative to
this, and we record absolute line numbers in record_line(). */
- int main_source_baseline = 0;
+ unsigned int main_source_baseline = 0;
unsigned *firstLine;
- CORE_ADDR addr;
- if (!(offset = first_fun_line_offset))
+ offset =
+ ((struct symloc *) this_symtab_psymtab->read_symtab_private)->lineno_off;
+ if (offset == 0)
goto return_after_cleanup;
memset (&main_subfile, '\0', sizeof (main_subfile));
- first_fun_line_offset = 0;
if (inclIndx == 0)
/* All source lines were in the main source file. None in include files. */
- enter_line_range (&main_subfile, offset, 0, start, end,
- &main_source_baseline);
+ enter_line_range (&main_subfile, offset, 0, start, end,
+ &main_source_baseline);
else
{
/* There was source with line numbers in include files. */
+
+ int linesz =
+ coff_data (this_symtab_psymtab->objfile->obfd)->local_linesz;
main_source_baseline = 0;
- for (ii=0; ii < inclIndx; ++ii)
+
+ for (ii = 0; ii < inclIndx; ++ii)
{
struct subfile *tmpSubfile;
if (offset < inclTable[ii].begin)
{
enter_line_range
- (&main_subfile, offset, inclTable[ii].begin - LINESZ,
+ (&main_subfile, offset, inclTable[ii].begin - linesz,
start, 0, &main_source_baseline);
}
firstLine = &(inclTable[ii].funStartLine);
/* Enter include file's lines now. */
- enter_line_range (tmpSubfile, inclTable[ii].begin,
+ enter_line_range (tmpSubfile, inclTable[ii].begin,
inclTable[ii].end, start, 0, firstLine);
- offset = inclTable[ii].end + LINESZ;
+ if (offset <= inclTable[ii].end)
+ offset = inclTable[ii].end + linesz;
}
/* All the include files' line have been processed at this point. Now,
- enter remaining lines of the main file, if any left. */
- if (offset < (linetab_offset + linetab_size + 1 - LINESZ))
+ enter remaining lines of the main file, if any left. */
+ if (offset < max_offset + 1 - linesz)
{
- enter_line_range (&main_subfile, offset, 0, start, end,
+ enter_line_range (&main_subfile, offset, 0, start, end,
&main_source_baseline);
}
}
lv = main_subfile.line_vector;
/* Line numbers are not necessarily ordered. xlc compilation will
- put static function to the end. */
+ put static function to the end. */
lineTb = arrange_linetable (lv);
if (lv == lineTb)
}
else
{
- free (lv);
+ xfree (lv);
current_subfile->line_vector = lineTb;
}
- current_subfile->line_vector_length =
+ current_subfile->line_vector_length =
current_subfile->line_vector->nitems;
}
/* Now, process included files' line numbers. */
- for (ii=0; ii < inclIndx; ++ii)
+ for (ii = 0; ii < inclIndx; ++ii)
{
- if ((inclTable[ii].subfile)->line_vector) /* Useless if!!! FIXMEmgo */
+ if ((inclTable[ii].subfile)->line_vector) /* Useless if!!! FIXMEmgo */
{
struct linetable *lineTb, *lv;
/* For the same include file, we might want to have more than one
subfile. This happens if we have something like:
- ......
- #include "foo.h"
- ......
- #include "foo.h"
- ......
+ ......
+ #include "foo.h"
+ ......
+ #include "foo.h"
+ ......
while foo.h including code in it. (stupid but possible)
Since start_subfile() looks at the name and uses an
fool it. */
#if 0
- start_subfile (inclTable[ii].name, (char*)0);
+ start_subfile (inclTable[ii].name, (char *) 0);
#else
{
/* Pick a fake name that will produce the same results as this
char *fakename = strrchr (inclTable[ii].name, '.');
if (fakename == NULL)
fakename = " ?";
- start_subfile (fakename, (char*)0);
- free (current_subfile->name);
+ start_subfile (fakename, (char *) 0);
+ xfree (current_subfile->name);
}
- current_subfile->name = strdup (inclTable[ii].name);
+ current_subfile->name = xstrdup (inclTable[ii].name);
#endif
if (lv == lineTb)
{
current_subfile->line_vector =
(struct linetable *) xrealloc
- (lv, (sizeof (struct linetable)
- + lv->nitems * sizeof (struct linetable_entry)));
+ (lv, (sizeof (struct linetable)
+ + lv->nitems * sizeof (struct linetable_entry)));
}
else
{
- free (lv);
+ xfree (lv);
current_subfile->line_vector = lineTb;
}
- current_subfile->line_vector_length =
+ current_subfile->line_vector_length =
current_subfile->line_vector->nitems;
- start_subfile (pop_subfile (), (char*)0);
+ start_subfile (pop_subfile (), (char *) 0);
}
}
- return_after_cleanup:
+return_after_cleanup:
/* We don't want to keep alloc/free'ing the global include file table. */
inclIndx = 0;
}
void
-aix_process_linenos ()
+aix_process_linenos (void)
{
/* process line numbers and enter them into line vector */
process_linenos (last_source_start_addr, cur_src_end_addr);
/* Enter a given range of lines into the line vector.
can be called in the following two ways:
- enter_line_range (subfile, beginoffset, endoffset, startaddr, 0, firstLine) or
- enter_line_range (subfile, beginoffset, 0, startaddr, endaddr, firstLine)
+ enter_line_range (subfile, beginoffset, endoffset, startaddr, 0, firstLine) or
+ enter_line_range (subfile, beginoffset, 0, startaddr, endaddr, firstLine)
endoffset points to the last line table entry that we should pay
attention to. */
static void
-enter_line_range (subfile, beginoffset, endoffset, startaddr, endaddr, firstLine)
- struct subfile *subfile;
- unsigned beginoffset, endoffset; /* offsets to line table */
- CORE_ADDR startaddr, endaddr;
- unsigned *firstLine;
+enter_line_range (struct subfile *subfile, unsigned beginoffset, unsigned endoffset, /* offsets to line table */
+ CORE_ADDR startaddr, /* offsets to line table */
+ CORE_ADDR endaddr, unsigned *firstLine)
{
- char *pp, *limit;
- CORE_ADDR addr;
-
-/* Do Byte swapping, if needed. FIXME! */
-#define P_LINENO(PP) (*(unsigned short*)((struct external_lineno*)(PP))->l_lnno)
-#define P_LINEADDR(PP) (*(long*)((struct external_lineno*)(PP))->l_addr.l_paddr)
-#define P_LINESYM(PP) (*(long*)((struct external_lineno*)(PP))->l_addr.l_symndx)
-
- pp = &linetab [beginoffset - linetab_offset];
- if (endoffset != 0 && endoffset - linetab_offset >= linetab_size)
- {
- static struct complaint msg =
- {"Bad line table offset in C_EINCL directive", 0, 0};
- complain (&msg);
- return;
- }
- limit = endoffset ? &linetab [endoffset - linetab_offset]
- : &linetab [linetab_size -1];
-
- while (pp <= limit) {
-
- /* find the address this line represents */
- addr = P_LINENO(pp) ?
- P_LINEADDR(pp) : read_symbol_nvalue (P_LINESYM(pp));
-
- if (addr < startaddr || (endaddr && addr >= endaddr))
- return;
-
- if (P_LINENO(pp) == 0) {
- *firstLine = read_symbol_lineno (P_LINESYM(pp));
- record_line (subfile, 0, addr);
- --(*firstLine);
- }
- else
- record_line (subfile, *firstLine + P_LINENO(pp), addr);
-
- pp += LINESZ;
- }
-}
-
-typedef struct {
- int fsize; /* file size */
- int fixedparms; /* number of fixed parms */
- int floatparms; /* number of float parms */
- unsigned int parminfo; /* parameter info.
- See /usr/include/sys/debug.h
- tbtable_ext.parminfo */
- int framesize; /* function frame size */
-} TracebackInfo;
-
-
-/* Given a function symbol, return its traceback information. */
-
- TracebackInfo *
-retrieve_tracebackinfo (abfd, textsec, cs)
+ unsigned int curoffset;
+ CORE_ADDR addr;
+ void *ext_lnno;
+ struct internal_lineno int_lnno;
+ unsigned int limit_offset;
bfd *abfd;
- sec_ptr textsec;
- struct coff_symbol *cs;
-{
-#define TBTABLE_BUFSIZ 2000
+ int linesz;
- static TracebackInfo tbInfo;
- struct tbtable *ptb;
-
- static char buffer [TBTABLE_BUFSIZ];
-
- int *pinsn;
- int bytesread=0; /* total # of bytes read so far */
- int bufferbytes; /* number of bytes in the buffer */
-
- int functionstart = cs->c_value - textsec->vma;
-
- memset (&tbInfo, '\0', sizeof (tbInfo));
-
- /* keep reading blocks of data from the text section, until finding a zero
- word and a traceback table. */
-
- /* Note: The logical thing way to write this code would be to assign
- to bufferbytes within the while condition. But that triggers a
- compiler (xlc in AIX 3.2) bug, so simplify it... */
- bufferbytes =
- (TBTABLE_BUFSIZ < (textsec->_raw_size - functionstart - bytesread) ?
- TBTABLE_BUFSIZ : (textsec->_raw_size - functionstart - bytesread));
- while (bufferbytes
- && (bfd_get_section_contents
- (abfd, textsec, buffer,
- (file_ptr)(functionstart + bytesread), bufferbytes)))
- {
- bytesread += bufferbytes;
- pinsn = (int*) buffer;
-
- /* if this is the first time we filled the buffer, retrieve function
- framesize info. */
-
- if (bytesread == bufferbytes) {
-
- /* skip over unrelated instructions */
-
- if (*pinsn == 0x7c0802a6) /* mflr r0 */
- ++pinsn;
- if ((*pinsn & 0xfc00003e) == 0x7c000026) /* mfcr Rx */
- ++pinsn;
- if ((*pinsn & 0xfc000000) == 0x48000000) /* bl foo, save fprs */
- ++pinsn;
- if ((*pinsn & 0xfc1f0000) == 0xbc010000) /* stm Rx, NUM(r1) */
- ++pinsn;
-
- do {
- int tmp = (*pinsn >> 16) & 0xffff;
+ if (endoffset == 0 && startaddr == 0 && endaddr == 0)
+ return;
+ curoffset = beginoffset;
+ limit_offset =
+ ((struct coff_symfile_info *) this_symtab_psymtab->objfile->sym_private)
+ ->max_lineno_offset;
- if (tmp == 0x9421) { /* stu r1, NUM(r1) */
- tbInfo.framesize = 0x10000 - (*pinsn & 0xffff);
- break;
+ if (endoffset != 0)
+ {
+ if (endoffset >= limit_offset)
+ {
+ complaint (&symfile_complaints,
+ "Bad line table offset in C_EINCL directive");
+ return;
}
- else if ((*pinsn == 0x93e1fffc) || /* st r31,-4(r1) */
- (tmp == 0x9001)) /* st r0, NUM(r1) */
- ;
- /* else, could not find a frame size. */
- else
- return NULL;
-
- } while (++pinsn && *pinsn);
-
- if (!tbInfo.framesize)
- return NULL;
-
- }
-
- /* look for a zero word. */
-
- while (*pinsn && (pinsn < (int*)(buffer + bufferbytes - sizeof(int))))
- ++pinsn;
-
- if (pinsn >= (int*)(buffer + bufferbytes))
- continue;
-
- if (*pinsn == 0) {
-
- /* function size is the amount of bytes we have skipped so far. */
- tbInfo.fsize = bytesread - (buffer + bufferbytes - (char*)pinsn);
-
- ++pinsn;
-
- /* if we don't have the whole traceback table in the buffer, re-read
- the whole thing. */
-
- /* This is how much to read to get the traceback table.
- 8 bytes of the traceback table are always present, plus we
- look at parminfo. */
-#define MIN_TBTABSIZ 12
-
- if ((char*)pinsn > (buffer + bufferbytes - MIN_TBTABSIZ)) {
-
- /* In case if we are *very* close to the end of the text section
- and cannot read properly from that point on, abort by returning
- NULL.
-
- This could happen if the traceback table is only 8 bytes,
- but we try to read 12 bytes of it.
- Handle this case more graciously -- FIXME */
-
- if (!bfd_get_section_contents (
- abfd, textsec, buffer,
- (file_ptr)(functionstart +
- bytesread - (buffer + bufferbytes - (char*)pinsn)),MIN_TBTABSIZ))
- { printf_unfiltered ("Abnormal return!..\n"); return NULL; }
-
- ptb = (struct tbtable *)buffer;
- }
- else
- ptb = (struct tbtable *)pinsn;
-
- tbInfo.fixedparms = ptb->tb.fixedparms;
- tbInfo.floatparms = ptb->tb.floatparms;
- tbInfo.parminfo = ptb->tb_ext.parminfo;
- return &tbInfo;
+ limit_offset = endoffset;
}
- bufferbytes =
- (TBTABLE_BUFSIZ < (textsec->_raw_size - functionstart - bytesread) ?
- TBTABLE_BUFSIZ : (textsec->_raw_size - functionstart - bytesread));
- }
- return NULL;
-}
-
-#if 0
-/* Given a function symbol, return a pointer to its traceback table. */
-
- struct tbtable *
-retrieve_traceback (abfd, textsec, cs, size)
- bfd *abfd;
- sec_ptr textsec;
- struct coff_symbol *cs;
- int *size; /* return function size */
-{
-#define TBTABLE_BUFSIZ 2000
-#define MIN_TBTABSIZ 50 /* minimum buffer size to hold a
- traceback table. */
-
- static char buffer [TBTABLE_BUFSIZ];
-
- int *pinsn;
- int bytesread=0; /* total # of bytes read so far */
- int bufferbytes; /* number of bytes in the buffer */
-
- int functionstart = cs->c_value - textsec->filepos + textsec->vma;
- *size = 0;
-
- /* keep reading blocks of data from the text section, until finding a zero
- word and a traceback table. */
-
- while (bfd_get_section_contents (abfd, textsec, buffer,
- (file_ptr)(functionstart + bytesread),
- bufferbytes = (
- (TBTABLE_BUFSIZ < (textsec->size - functionstart - bytesread)) ?
- TBTABLE_BUFSIZ : (textsec->size - functionstart - bytesread))))
- {
- bytesread += bufferbytes;
- pinsn = (int*) buffer;
-
- /* look for a zero word. */
-
- while (*pinsn && (pinsn < (int*)(buffer + bufferbytes - sizeof(int))))
- ++pinsn;
-
- if (pinsn >= (int*)(buffer + bufferbytes))
- continue;
-
- if (*pinsn == 0) {
-
- /* function size is the amount of bytes we have skipped so far. */
- *size = bytesread - (buffer + bufferbytes - pinsn);
-
- ++pinsn;
+ else
+ limit_offset -= 1;
- /* if we don't have the whole traceback table in the buffer, re-read
- the whole thing. */
+ abfd = this_symtab_psymtab->objfile->obfd;
+ linesz = coff_data (abfd)->local_linesz;
+ ext_lnno = alloca (linesz);
- if ((char*)pinsn > (buffer + bufferbytes - MIN_TBTABSIZ)) {
+ while (curoffset <= limit_offset)
+ {
+ bfd_seek (abfd, curoffset, SEEK_SET);
+ bfd_bread (ext_lnno, linesz, abfd);
+ bfd_coff_swap_lineno_in (abfd, ext_lnno, &int_lnno);
- /* In case if we are *very* close to the end of the text section
- and cannot read properly from that point on, abort for now.
- Handle this case more graciously -- FIXME */
+ /* Find the address this line represents. */
+ addr = (int_lnno.l_lnno
+ ? int_lnno.l_addr.l_paddr
+ : read_symbol_nvalue (int_lnno.l_addr.l_symndx));
+ addr += ANOFFSET (this_symtab_psymtab->objfile->section_offsets,
+ SECT_OFF_TEXT (this_symtab_psymtab->objfile));
- if (!bfd_get_section_contents (
- abfd, textsec, buffer,
- (file_ptr)(functionstart +
- bytesread - (buffer + bufferbytes - pinsn)),MIN_TBTABSIZ))
- /* abort (); */ { printf_unfiltered ("abort!!!\n"); return NULL; }
+ if (addr < startaddr || (endaddr && addr >= endaddr))
+ return;
- return (struct tbtable *)buffer;
- }
+ if (int_lnno.l_lnno == 0)
+ {
+ *firstLine = read_symbol_lineno (int_lnno.l_addr.l_symndx);
+ record_line (subfile, 0, addr);
+ --(*firstLine);
+ }
else
- return (struct tbtable *)pinsn;
+ record_line (subfile, *firstLine + int_lnno.l_lnno, addr);
+ curoffset += linesz;
}
- }
- return NULL;
}
-#endif /* 0 */
-
-
/* Save the vital information for use when closing off the current file.
/* Reading symbol table has to be fast! Keep the followings as macros, rather
than functions. */
-#define RECORD_MINIMAL_SYMBOL(NAME, ADDR, TYPE, ALLOCED, SECTION, OBJFILE) \
+#define RECORD_MINIMAL_SYMBOL(NAME, ADDR, TYPE, SECTION, OBJFILE) \
{ \
char *namestr; \
namestr = (NAME); \
if (namestr[0] == '.') ++namestr; \
- if (!(ALLOCED)) { \
- (NAME) = namestr = \
- obstack_copy0 (&objfile->symbol_obstack, namestr, strlen (namestr)); \
- (ALLOCED) = 1; \
- } \
prim_record_minimal_symbol_and_info (namestr, (ADDR), (TYPE), \
- (char *)NULL, (SECTION), (OBJFILE)); \
+ (char *)NULL, (SECTION), (asection *)NULL, (OBJFILE)); \
misc_func_recorded = 1; \
}
-/* A parameter template, used by ADD_PARM_TO_PENDING. It is initialized
- in our initializer function at the bottom of the file, to avoid
- dependencies on the exact "struct symbol" format. */
-
-static struct symbol parmsym;
-
-/* Add a parameter to a given pending symbol list. */
-
-#define ADD_PARM_TO_PENDING(PARM, VALUE, PTYPE, PENDING_SYMBOLS) \
-{ \
- PARM = (struct symbol *) \
- obstack_alloc (&objfile->symbol_obstack, sizeof (struct symbol)); \
- *(PARM) = parmsym; \
- SYMBOL_TYPE (PARM) = PTYPE; \
- SYMBOL_VALUE (PARM) = VALUE; \
- add_symbol_to_list (PARM, &PENDING_SYMBOLS); \
-}
-
-
/* xcoff has static blocks marked in `.bs', `.es' pairs. They cannot be
nested. At any given time, a symbol can only be in one static block.
This is the base address of current static block, zero if non exists. */
-
+
static int static_block_base = 0;
/* Section number for the current static block. */
/* This is the function which stabsread.c calls to get symbol
continuations. */
+
static char *
-xcoff_next_symbol_text ()
+xcoff_next_symbol_text (struct objfile *objfile)
{
struct internal_syment symbol;
- static struct complaint msg =
- {"Unexpected symbol continuation", 0, 0};
char *retval;
+ /* FIXME: is this the same as the passed arg? */
+ objfile = this_symtab_psymtab->objfile;
- bfd_coff_swap_sym_in (current_objfile->obfd, raw_symbol, &symbol);
+ bfd_coff_swap_sym_in (objfile->obfd, raw_symbol, &symbol);
if (symbol.n_zeroes)
{
- complain (&msg);
+ complaint (&symfile_complaints, "Unexpected symbol continuation");
/* Return something which points to '\0' and hope the symbol reading
- code does something reasonable. */
+ code does something reasonable. */
retval = "";
}
else if (symbol.n_sclass & 0x80)
{
- retval = debugsec + symbol.n_offset;
- raw_symbol += coff_data (current_objfile->obfd)->local_symesz;
+ retval =
+ ((struct coff_symfile_info *) objfile->sym_private)->debugsec
+ + symbol.n_offset;
+ raw_symbol +=
+ coff_data (objfile->obfd)->local_symesz;
++symnum;
}
else
{
- complain (&msg);
+ complaint (&symfile_complaints, "Unexpected symbol continuation");
/* Return something which points to '\0' and hope the symbol reading
- code does something reasonable. */
+ code does something reasonable. */
retval = "";
}
return retval;
}
-/* read the whole symbol table of a given bfd. */
+/* Read symbols for a given partial symbol table. */
static void
-read_xcoff_symtab (objfile, nsyms)
- struct objfile *objfile; /* Object file we're reading from */
- int nsyms; /* # of symbols */
+read_xcoff_symtab (struct partial_symtab *pst)
{
+ struct objfile *objfile = pst->objfile;
bfd *abfd = objfile->obfd;
char *raw_auxptr; /* Pointer to first raw aux entry for sym */
- sec_ptr textsec; /* Pointer to text section */
- TracebackInfo *ptb; /* Pointer to traceback table */
+ char *strtbl = ((struct coff_symfile_info *) objfile->sym_private)->strtbl;
+ char *debugsec =
+ ((struct coff_symfile_info *) objfile->sym_private)->debugsec;
+ char *debugfmt = bfd_xcoff_is_xcoff64 (abfd) ? "XCOFF64" : "XCOFF";
struct internal_syment symbol[1];
union internal_auxent main_aux;
CORE_ADDR file_end_addr = 0;
int next_file_symnum = -1;
+ unsigned int max_symnum;
int just_started = 1;
int depth = 0;
- int toc_offset = 0; /* toc offset value in data section. */
- int val;
- int fcn_last_line;
- int fcn_start_addr;
- long fcn_line_offset;
- size_t size;
+ int fcn_start_addr = 0;
struct coff_symbol fcn_stab_saved;
/* fcn_cs_saved is global because process_xcoff_symbol needs it. */
union internal_auxent fcn_aux_saved;
- struct type *fcn_type_saved = NULL;
struct context_stack *new;
char *filestring = " _start_ "; /* Name of the current file. */
- char *last_csect_name; /* last seen csect's name and value */
+ char *last_csect_name; /* last seen csect's name and value */
CORE_ADDR last_csect_val;
int last_csect_sec;
- int misc_func_recorded; /* true if any misc. function */
- current_objfile = objfile;
+ this_symtab_psymtab = pst;
/* Get the appropriate COFF "constants" related to the file we're
handling. */
- N_TMASK = coff_data (abfd)->local_n_tmask;
- N_BTSHFT = coff_data (abfd)->local_n_btshft;
local_symesz = coff_data (abfd)->local_symesz;
last_source_file = NULL;
last_csect_name = 0;
last_csect_val = 0;
- misc_func_recorded = 0;
start_stabs ();
- start_symtab (filestring, (char *)NULL, file_start_addr);
- symnum = 0;
+ start_symtab (filestring, (char *) NULL, file_start_addr);
+ record_debugformat (debugfmt);
+ symnum = ((struct symloc *) pst->read_symtab_private)->first_symnum;
+ max_symnum =
+ symnum + ((struct symloc *) pst->read_symtab_private)->numsyms;
first_object_file_end = 0;
- /* Allocate space for the entire symbol table at once, and read it
- all in. The bfd is already positioned at the beginning of
- the symbol table. */
-
- size = coff_data (abfd)->local_symesz * nsyms;
- symtbl = xmalloc (size);
- symtbl_num_syms = nsyms;
-
- val = bfd_read (symtbl, size, 1, abfd);
- if (val != size)
- perror_with_name ("reading symbol table");
-
- raw_symbol = symtbl;
-
- textsec = bfd_get_section_by_name (abfd, ".text");
- if (!textsec)
- {
- printf_unfiltered ("Unable to locate text section!\n");
- }
+ raw_symbol =
+ ((struct coff_symfile_info *) objfile->sym_private)->symtbl
+ + symnum * local_symesz;
- next_symbol_text_func = xcoff_next_symbol_text;
-
- while (symnum < nsyms)
+ while (symnum < max_symnum)
{
QUIT; /* make this command interruptable. */
/* READ_ONE_SYMBOL (symbol, cs, symname_alloced); */
/* read one symbol into `cs' structure. After processing the
- whole symbol table, only string table will be kept in memory,
- symbol table and debug section of xcoff will be freed. Thus
- we can mark symbols with names in string table as
- `alloced'. */
+ whole symbol table, only string table will be kept in memory,
+ symbol table and debug section of xcoff will be freed. Thus
+ we can mark symbols with names in string table as
+ `alloced'. */
{
int ii;
/* We must use the original, unswapped, name here so the name field
pointed to by cs->c_name will persist throughout xcoffread. If
we use the new field, it gets overwritten for each symbol. */
- cs->c_name = ((struct external_syment *)raw_symbol)->e.e_name;
+ cs->c_name = ((struct external_syment *) raw_symbol)->e.e_name;
/* If it's exactly E_SYMNMLEN characters long it isn't
'\0'-terminated. */
if (cs->c_name[E_SYMNMLEN - 1] != '\0')
{
char *p;
- p = obstack_alloc (&objfile->symbol_obstack, E_SYMNMLEN + 1);
+ p = obstack_alloc (&objfile->objfile_obstack, E_SYMNMLEN + 1);
strncpy (p, cs->c_name, E_SYMNMLEN);
p[E_SYMNMLEN] = '\0';
cs->c_name = p;
else
{
/* in string table */
- cs->c_name = strtbl + (int)symbol->n_offset;
+ cs->c_name = strtbl + (int) symbol->n_offset;
symname_alloced = 1;
}
cs->c_value = symbol->n_value;
cs->c_sclass = symbol->n_sclass;
cs->c_secnum = symbol->n_scnum;
- cs->c_type = (unsigned)symbol->n_type;
+ cs->c_type = (unsigned) symbol->n_type;
- raw_symbol += coff_data (abfd)->local_symesz;
+ raw_symbol += local_symesz;
++symnum;
/* Save addr of first aux entry. */
{
if (last_source_file)
{
- end_symtab (cur_src_end_addr, 1, 0, objfile, SECT_OFF_TEXT);
+ pst->symtab =
+ end_symtab (cur_src_end_addr, objfile, SECT_OFF_TEXT (objfile));
end_stabs ();
}
start_stabs ();
- start_symtab ("_globals_", (char *)NULL, (CORE_ADDR)0);
+ start_symtab ("_globals_", (char *) NULL, (CORE_ADDR) 0);
+ record_debugformat (debugfmt);
cur_src_end_addr = first_object_file_end;
/* done with all files, everything from here on is globals */
}
- /* if explicitly specified as a function, treat is as one. */
- if (ISFCN(cs->c_type) && cs->c_sclass != C_TPDEF)
- {
- bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
- 0, cs->c_naux, &main_aux);
- goto function_entry_point;
- }
-
if ((cs->c_sclass == C_EXT || cs->c_sclass == C_HIDEXT)
&& cs->c_naux == 1)
{
{
/* A program csect is seen. We have to allocate one
- symbol table for each program csect. Normally gdb
- prefers one symtab for each source file. In case
- of AIX, one source file might include more than one
- [PR] csect, and they don't have to be adjacent in
- terms of the space they occupy in memory. Thus, one
- single source file might get fragmented in the
- memory and gdb's file start and end address
- approach does not work! GCC (and I think xlc) seem
- to put all the code in the unnamed program csect. */
+ symbol table for each program csect. Normally gdb
+ prefers one symtab for each source file. In case
+ of AIX, one source file might include more than one
+ [PR] csect, and they don't have to be adjacent in
+ terms of the space they occupy in memory. Thus, one
+ single source file might get fragmented in the
+ memory and gdb's file start and end address
+ approach does not work! GCC (and I think xlc) seem
+ to put all the code in the unnamed program csect. */
if (last_csect_name)
{
-
- /* If no misc. function recorded in the last
- seen csect, enter it as a function. This
- will take care of functions like strcmp()
- compiled by xlc. */
-
- if (!misc_func_recorded)
- {
- int alloced = 0;
- RECORD_MINIMAL_SYMBOL
- (last_csect_name, last_csect_val,
- mst_text, alloced, last_csect_sec,
- objfile);
- }
-
complete_symtab (filestring, file_start_addr);
cur_src_end_addr = file_end_addr;
- end_symtab (file_end_addr, 1, 0, objfile,
- SECT_OFF_TEXT);
+ end_symtab (file_end_addr, objfile, SECT_OFF_TEXT (objfile));
end_stabs ();
start_stabs ();
/* Give all csects for this source file the same
name. */
- start_symtab (filestring, NULL, (CORE_ADDR)0);
+ start_symtab (filestring, NULL, (CORE_ADDR) 0);
+ record_debugformat (debugfmt);
}
/* If this is the very first csect seen,
- basically `__start'. */
+ basically `__start'. */
if (just_started)
{
first_object_file_end
just_started = 0;
}
- file_start_addr = cs->c_value;
- file_end_addr = cs->c_value + CSECT_LEN (&main_aux);
+ file_start_addr =
+ cs->c_value + ANOFFSET (objfile->section_offsets,
+ SECT_OFF_TEXT (objfile));
+ file_end_addr = file_start_addr + CSECT_LEN (&main_aux);
- if (cs->c_name && cs->c_name[0] == '.')
+ if (cs->c_name && (cs->c_name[0] == '.'
+ || cs->c_name[0] == '@'))
{
last_csect_name = cs->c_name;
last_csect_val = cs->c_value;
- last_csect_sec = cs_to_section (cs, objfile);
+ last_csect_sec = secnum_to_section (cs->c_secnum, objfile);
}
}
- misc_func_recorded = 0;
continue;
- case XMC_RW :
- break;
+ /* All other symbols are put into the minimal symbol
+ table only. */
- /* If the section is not a data description,
- ignore it. Note that uninitialized data will
- show up as XTY_CM/XMC_RW pair. */
+ case XMC_RW:
+ continue;
case XMC_TC0:
- if (toc_offset)
- warning ("More than one xmc_tc0 symbol found.");
- toc_offset = cs->c_value;
continue;
case XMC_TC:
-#ifdef STATIC_NODEBUG_VARS
- /* We need to process these symbols if they are C_HIDEXT,
- for static variables in files compiled without -g. */
- if (cs->c_sclass == C_HIDEXT)
- break;
- else
-#endif
- continue;
+ continue;
default:
/* Ignore the symbol. */
case XMC_PR:
/* a function entry point. */
function_entry_point:
- RECORD_MINIMAL_SYMBOL
- (cs->c_name, cs->c_value, mst_text,
- symname_alloced, cs_to_section (cs, objfile),
- objfile);
- fcn_line_offset = main_aux.x_sym.x_fcnary.x_fcn.x_lnnoptr;
fcn_start_addr = cs->c_value;
/* save the function header info, which will be used
when `.bf' is seen. */
fcn_cs_saved = *cs;
fcn_aux_saved = main_aux;
-
- ptb = NULL;
-
- /* If function has two auxent, then debugging information is
- already available for it. Process traceback table for
- functions with only one auxent. */
-
- if (cs->c_naux == 1)
- ptb = retrieve_tracebackinfo (abfd, textsec, cs);
-
- else if (cs->c_naux != 2)
- {
- static struct complaint msg =
- {"Expected one or two auxents for function", 0, 0};
- complain (&msg);
- }
-
- /* If there is traceback info, create and add parameters
- for it. */
-
- if (ptb && (ptb->fixedparms || ptb->floatparms))
- {
-
- int parmcnt = ptb->fixedparms + ptb->floatparms;
- char *parmcode = (char*) &ptb->parminfo;
-
- /* The link area is 0x18 bytes. */
- int parmvalue = ptb->framesize + 0x18;
- unsigned int ii, mask;
-
- for (ii=0, mask = 0x80000000; ii <parmcnt; ++ii)
- {
- struct symbol *parm;
-
- if (ptb->parminfo & mask)
- {
- /* float or double */
- mask = mask >> 1;
- if (ptb->parminfo & mask)
- {
- /* double parm */
- ADD_PARM_TO_PENDING
- (parm, parmvalue, builtin_type_double,
- local_symbols);
- parmvalue += sizeof (double);
- }
- else
- {
- /* float parm */
- ADD_PARM_TO_PENDING
- (parm, parmvalue, builtin_type_float,
- local_symbols);
- parmvalue += sizeof (float);
- }
- }
- else
- {
- static struct type *intparm_type;
- if (intparm_type == NULL)
- {
-
- /* Create a type, which is a pointer
- type (a kludge to make it print
- in hex), but which has a name
- indicating we don't know the real
- type. */
-
- intparm_type =
- init_type
- (TYPE_CODE_PTR,
- TARGET_PTR_BIT / HOST_CHAR_BIT,
- 0,
- "<non-float parameter>",
- NULL);
- TYPE_TARGET_TYPE (intparm_type) =
- builtin_type_void;
- }
- ADD_PARM_TO_PENDING
- (parm, parmvalue,
- intparm_type,
- local_symbols);
- parmvalue += sizeof (int);
- }
- mask = mask >> 1;
- }
-
- /* Fake this as a function. Needed in
- process_xcoff_symbol(). */
- cs->c_type = 32;
-
- finish_block
- (process_xcoff_symbol (cs, objfile), &local_symbols,
- pending_blocks, cs->c_value,
- cs->c_value + ptb->fsize, objfile);
- }
continue;
case XMC_GL:
/* shared library function trampoline code entry point. */
-
- /* record trampoline code entries as
- mst_solib_trampoline symbol. When we lookup mst
- symbols, we will choose mst_text over
- mst_solib_trampoline. */
- RECORD_MINIMAL_SYMBOL
- (cs->c_name, cs->c_value,
- mst_solib_trampoline,
- symname_alloced, cs_to_section (cs, objfile), objfile);
continue;
case XMC_DS:
/* xlc puts each variable in a separate csect, so we get
an XTY_SD for each variable. But gcc puts several
variables in a csect, so that each variable only gets
- an XTY_LD. We still need to record them. This will
- typically be XMC_RW; I suspect XMC_RO and XMC_BS might
- be possible too. */
- break;
+ an XTY_LD. This will typically be XMC_RW; I suspect
+ XMC_RO and XMC_BS might be possible too.
+ These variables are put in the minimal symbol table
+ only. */
+ continue;
}
+ break;
+
+ case XTY_CM:
+ /* Common symbols are put into the minimal symbol table only. */
+ continue;
default:
break;
}
}
+ /* If explicitly specified as a function, treat is as one. This check
+ evaluates to true for @FIX* bigtoc CSECT symbols, so it must occur
+ after the above CSECT check. */
+ if (ISFCN (cs->c_type) && cs->c_sclass != C_TPDEF)
+ {
+ bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
+ 0, cs->c_naux, &main_aux);
+ goto function_entry_point;
+ }
+
switch (cs->c_sclass)
{
case C_FILE:
- /* see if the last csect needs to be recorded. */
-
- if (last_csect_name && !misc_func_recorded)
- {
-
- /* If no misc. function recorded in the last seen csect, enter
- it as a function. This will take care of functions like
- strcmp() compiled by xlc. */
-
- int alloced = 0;
- RECORD_MINIMAL_SYMBOL
- (last_csect_name, last_csect_val,
- mst_text, alloced, last_csect_sec, objfile);
- }
-
/* c_value field contains symnum of next .file entry in table
or symnum of first global after last .file. */
complete_symtab (filestring, file_start_addr);
cur_src_end_addr = file_end_addr;
- end_symtab (file_end_addr, 1, 0, objfile, SECT_OFF_TEXT);
+ end_symtab (file_end_addr, objfile, SECT_OFF_TEXT (objfile));
end_stabs ();
/* XCOFF, according to the AIX 3.2 documentation, puts the filename
{
bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
0, cs->c_naux, &main_aux);
- filestring = coff_getfilename (&main_aux);
+ filestring = coff_getfilename (&main_aux, objfile);
}
else
filestring = cs->c_name;
start_stabs ();
- start_symtab (filestring, (char *)NULL, (CORE_ADDR)0);
+ start_symtab (filestring, (char *) NULL, (CORE_ADDR) 0);
+ record_debugformat (debugfmt);
last_csect_name = 0;
/* reset file start and end addresses. A compilation unit with no text
break;
case C_FCN:
- if (STREQ (cs->c_name, ".bf"))
+ if (DEPRECATED_STREQ (cs->c_name, ".bf"))
{
-
+ CORE_ADDR off = ANOFFSET (objfile->section_offsets,
+ SECT_OFF_TEXT (objfile));
bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
0, cs->c_naux, &main_aux);
within_function = 1;
- mark_first_line (fcn_line_offset, cs->c_symnum);
+ new = push_context (0, fcn_start_addr + off);
- new = push_context (0, fcn_start_addr);
-
- new->name = define_symbol
- (fcn_cs_saved.c_value, fcn_stab_saved.c_name, 0, 0, objfile);
+ new->name = define_symbol
+ (fcn_cs_saved.c_value + off,
+ fcn_stab_saved.c_name, 0, 0, objfile);
if (new->name != NULL)
- SYMBOL_SECTION (new->name) = cs_to_section (cs, objfile);
+ SYMBOL_SECTION (new->name) = SECT_OFF_TEXT (objfile);
}
- else if (STREQ (cs->c_name, ".ef"))
+ else if (DEPRECATED_STREQ (cs->c_name, ".ef"))
{
bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
0, cs->c_naux, &main_aux);
/* The value of .ef is the address of epilogue code;
- not useful for gdb. */
+ not useful for gdb. */
/* { main_aux.x_sym.x_misc.x_lnsz.x_lnno
- contains number of lines to '}' */
+ contains number of lines to '}' */
- fcn_last_line = main_aux.x_sym.x_misc.x_lnsz.x_lnno;
+ if (context_stack_depth <= 0)
+ { /* We attempted to pop an empty context stack */
+ ef_complaint (cs->c_symnum);
+ within_function = 0;
+ break;
+ }
new = pop_context ();
/* Stack must be empty now. */
if (context_stack_depth > 0 || new == NULL)
{
- complain (&ef_complaint, cs->c_symnum);
+ ef_complaint (cs->c_symnum);
within_function = 0;
break;
}
finish_block (new->name, &local_symbols, new->old_blocks,
new->start_addr,
- fcn_cs_saved.c_value +
- fcn_aux_saved.x_sym.x_misc.x_fsize, objfile);
+ (fcn_cs_saved.c_value
+ + fcn_aux_saved.x_sym.x_misc.x_fsize
+ + ANOFFSET (objfile->section_offsets,
+ SECT_OFF_TEXT (objfile))),
+ objfile);
within_function = 0;
}
break;
/* Begin static block. */
{
struct internal_syment symbol;
- struct coff_symbol csymbol;
read_symbol (&symbol, cs->c_value);
static_block_base = symbol.n_value;
- csymbol.c_secnum = symbol.n_scnum;
- static_block_section = cs_to_section (&csymbol, objfile);
+ static_block_section =
+ secnum_to_section (symbol.n_scnum, objfile);
}
break;
case C_UNTAG:
case C_ENTAG:
{
- static struct complaint msg =
- {"Unrecognized storage class %d.", 0, 0};
- complain (&msg, cs->c_sclass);
+ complaint (&symfile_complaints, "Unrecognized storage class %d.",
+ cs->c_sclass);
}
break;
/* Ignore these. */
break;
- /* This is wrong. These symbols are XMC_TC, which means that
- the value of the symbol is the address of the TOC entry, not
- the address of the variable itself. */
case C_HIDEXT:
-#ifdef STATIC_NODEBUG_VARS
- {
- /* This is the only place that static variables show up in files
- compiled without -g. External variables also have a C_EXT,
- so that is why we record everything as mst_file_* here. */
- enum minimal_symbol_type ms_type;
- CORE_ADDR tmpaddr;
- int sec;
-
- sec = cs_to_section (cs, objfile);
- tmpaddr = cs->c_value;
-
- switch (sec)
- {
- case SECT_OFF_TEXT:
- case SECT_OFF_RODATA:
- ms_type = mst_file_text;
- break;
- case SECT_OFF_DATA:
- ms_type = mst_file_data;
- break;
- case SECT_OFF_BSS:
- ms_type = mst_file_bss;
- break;
- default:
- ms_type = mst_unknown;
- break;
- }
- RECORD_MINIMAL_SYMBOL (cs->c_name, cs->c_value, ms_type,
- symname_alloced, sec, objfile);
- }
-#endif /* STATIC_NODEBUG_VARS */
+ case C_STAT:
break;
case C_BINCL:
break;
case C_BLOCK:
- if (STREQ (cs->c_name, ".bb"))
+ if (DEPRECATED_STREQ (cs->c_name, ".bb"))
{
depth++;
- new = push_context (depth, cs->c_value);
+ new = push_context (depth,
+ (cs->c_value
+ + ANOFFSET (objfile->section_offsets,
+ SECT_OFF_TEXT (objfile))));
}
- else if (STREQ (cs->c_name, ".eb"))
+ else if (DEPRECATED_STREQ (cs->c_name, ".eb"))
{
+ if (context_stack_depth <= 0)
+ { /* We attempted to pop an empty context stack */
+ eb_complaint (cs->c_symnum);
+ break;
+ }
new = pop_context ();
if (depth-- != new->depth)
{
- complain (&eb_complaint, symnum);
+ eb_complaint (cs->c_symnum);
break;
}
if (local_symbols && context_stack_depth > 0)
{
/* Make a block for the local symbols within. */
finish_block (new->name, &local_symbols, new->old_blocks,
- new->start_addr, cs->c_value, objfile);
+ new->start_addr,
+ (cs->c_value
+ + ANOFFSET (objfile->section_offsets,
+ SECT_OFF_TEXT (objfile))),
+ objfile);
}
local_symbols = new->locals;
}
if (last_source_file)
{
- end_symtab (cur_src_end_addr, 1, 0, objfile, SECT_OFF_TEXT);
+ struct symtab *s;
+
+ complete_symtab (filestring, file_start_addr);
+ cur_src_end_addr = file_end_addr;
+ s = end_symtab (file_end_addr, objfile, SECT_OFF_TEXT (objfile));
+ /* When reading symbols for the last C_FILE of the objfile, try
+ to make sure that we set pst->symtab to the symtab for the
+ file, not to the _globals_ symtab. I'm not sure whether this
+ actually works right or when/if it comes up. */
+ if (pst->symtab == NULL)
+ pst->symtab = s;
end_stabs ();
}
-
- free (symtbl);
- current_objfile = NULL;
-
- /* Record the toc offset value of this symbol table into ldinfo structure.
- If no XMC_TC0 is found, toc_offset should be zero. Another place to obtain
- this information would be file auxiliary header. */
-
-#ifndef FAKING_RS6000
- xcoff_add_toc_to_loadinfo (toc_offset);
-#endif
}
#define SYMBOL_DUP(SYMBOL1, SYMBOL2) \
(SYMBOL2) = (struct symbol *) \
- obstack_alloc (&objfile->symbol_obstack, sizeof (struct symbol)); \
+ obstack_alloc (&objfile->objfile_obstack, sizeof (struct symbol)); \
*(SYMBOL2) = *(SYMBOL1);
-
-
+
+
#define SYMNAME_ALLOC(NAME, ALLOCED) \
- (ALLOCED) ? (NAME) : obstack_copy0 (&objfile->symbol_obstack, (NAME), strlen (NAME));
+ (ALLOCED) ? (NAME) : obsavestring ((NAME), strlen (NAME), &objfile->objfile_obstack);
static struct type *func_symbol_type;
/* process one xcoff symbol. */
static struct symbol *
-process_xcoff_symbol (cs, objfile)
- register struct coff_symbol *cs;
- struct objfile *objfile;
+process_xcoff_symbol (struct coff_symbol *cs, struct objfile *objfile)
{
struct symbol onesymbol;
- register struct symbol *sym = &onesymbol;
+ struct symbol *sym = &onesymbol;
struct symbol *sym2 = NULL;
- struct type *ttype;
- char *name, *pp, *qq;
- int struct_and_type_combined;
- int nameless;
+ char *name, *pp;
+
+ int sec;
+ CORE_ADDR off;
+
+ if (cs->c_secnum < 0)
+ {
+ /* The value is a register number, offset within a frame, etc.,
+ and does not get relocated. */
+ off = 0;
+ sec = -1;
+ }
+ else
+ {
+ sec = secnum_to_section (cs->c_secnum, objfile);
+ off = ANOFFSET (objfile->section_offsets, sec);
+ }
name = cs->c_name;
if (name[0] == '.')
memset (sym, '\0', sizeof (struct symbol));
/* default assumptions */
- SYMBOL_VALUE (sym) = cs->c_value;
- SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
- SYMBOL_SECTION (sym) = cs_to_section (cs, objfile);
+ SYMBOL_VALUE_ADDRESS (sym) = cs->c_value + off;
+ SYMBOL_DOMAIN (sym) = VAR_DOMAIN;
+ SYMBOL_SECTION (sym) = secnum_to_section (cs->c_secnum, objfile);
if (ISFCN (cs->c_type))
{
/* At this point, we don't know the type of the function. This
- will be patched with the type from its stab entry later on in
- patch_block_stabs (), unless the file was compiled without -g. */
+ will be patched with the type from its stab entry later on in
+ patch_block_stabs (), unless the file was compiled without -g. */
- SYMBOL_NAME (sym) = SYMNAME_ALLOC (name, symname_alloced);
+ DEPRECATED_SYMBOL_NAME (sym) = SYMNAME_ALLOC (name, symname_alloced);
SYMBOL_TYPE (sym) = func_symbol_type;
SYMBOL_CLASS (sym) = LOC_BLOCK;
switch (cs->c_sclass)
{
#if 0
+ /* The values of functions and global symbols are now resolved
+ via the global_sym_chain in stabsread.c. */
case C_FUN:
if (fcn_cs_saved.c_sclass == C_EXT)
add_stab_to_list (name, &global_stabs);
else
add_stab_to_list (name, &file_stabs);
break;
-#endif
case C_GSYM:
add_stab_to_list (name, &global_stabs);
break;
+#endif
case C_BCOMM:
common_block_start (cs->c_name, objfile);
break;
default:
- complain (&storclass_complaint, cs->c_sclass);
+ complaint (&symfile_complaints, "Unexpected storage class: %d",
+ cs->c_sclass);
/* FALLTHROUGH */
case C_DECL:
case C_PSYM:
case C_RPSYM:
case C_ECOML:
+ case C_LSYM:
+ case C_RSYM:
+ case C_GSYM:
- sym = define_symbol (cs->c_value, cs->c_name, 0, 0, objfile);
- if (sym != NULL)
- {
- SYMBOL_SECTION (sym) = cs_to_section (cs, objfile);
- }
- return sym;
+ {
+ sym = define_symbol (cs->c_value + off, cs->c_name, 0, 0, objfile);
+ if (sym != NULL)
+ {
+ SYMBOL_SECTION (sym) = sec;
+ }
+ return sym;
+ }
case C_STSYM:
where we need to, which is not necessarily super-clean,
but seems workable enough. */
- if (*name == ':' || (pp = (char *) strchr(name, ':')) == NULL)
+ if (*name == ':' || (pp = (char *) strchr (name, ':')) == NULL)
return NULL;
++pp;
if (*pp == 'V' && !within_function)
*pp = 'S';
- sym = define_symbol (cs->c_value, cs->c_name, 0, 0, objfile);
+ sym = define_symbol ((cs->c_value
+ + ANOFFSET (objfile->section_offsets,
+ static_block_section)),
+ cs->c_name, 0, 0, objfile);
if (sym != NULL)
{
- SYMBOL_VALUE (sym) += static_block_base;
+ SYMBOL_VALUE_ADDRESS (sym) += static_block_base;
SYMBOL_SECTION (sym) = static_block_section;
}
return sym;
- case C_LSYM:
- sym = define_symbol (cs->c_value, cs->c_name, 0, N_LSYM, objfile);
- if (sym != NULL)
- {
- SYMBOL_SECTION (sym) = cs_to_section (cs, objfile);
- }
- return sym;
-
- case C_AUTO:
- SYMBOL_CLASS (sym) = LOC_LOCAL;
- SYMBOL_NAME (sym) = SYMNAME_ALLOC (name, symname_alloced);
- SYMBOL_SECTION (sym) = cs_to_section (cs, objfile);
- SYMBOL_DUP (sym, sym2);
- add_symbol_to_list (sym2, &local_symbols);
- break;
-
- case C_EXT:
- SYMBOL_CLASS (sym) = LOC_STATIC;
- SYMBOL_NAME (sym) = SYMNAME_ALLOC (name, symname_alloced);
- SYMBOL_SECTION (sym) = cs_to_section (cs, objfile);
- SYMBOL_DUP (sym, sym2);
- add_symbol_to_list (sym2, &global_symbols);
- break;
-
- case C_STAT:
- SYMBOL_CLASS (sym) = LOC_STATIC;
- SYMBOL_NAME (sym) = SYMNAME_ALLOC (name, symname_alloced);
- SYMBOL_SECTION (sym) = cs_to_section (cs, objfile);
- SYMBOL_DUP (sym, sym2);
- add_symbol_to_list
- (sym2, within_function ? &local_symbols : &file_symbols);
- break;
-
- case C_RSYM:
- pp = (char*) strchr (name, ':');
- if (pp)
- {
- sym = define_symbol (cs->c_value, cs->c_name, 0, 0, objfile);
- if (sym != NULL)
- SYMBOL_SECTION (sym) = cs_to_section (cs, objfile);
- return sym;
- }
- else
- {
- complain (&rsym_complaint, name);
- return NULL;
- }
}
}
return sym2;
}
-/* Extract the file name from the aux entry of a C_FILE symbol. Return
- only the last component of the name. Result is in static storage and
- is only good for temporary use. */
+/* Extract the file name from the aux entry of a C_FILE symbol.
+ Result is in static storage and is only good for temporary use. */
static char *
-coff_getfilename (aux_entry)
- union internal_auxent *aux_entry;
+coff_getfilename (union internal_auxent *aux_entry, struct objfile *objfile)
{
static char buffer[BUFSIZ];
- register char *temp;
- char *result;
if (aux_entry->x_file.x_n.x_zeroes == 0)
- strcpy (buffer, strtbl + aux_entry->x_file.x_n.x_offset);
+ strcpy (buffer,
+ ((struct coff_symfile_info *) objfile->sym_private)->strtbl
+ + aux_entry->x_file.x_n.x_offset);
else
{
strncpy (buffer, aux_entry->x_file.x_fname, FILNMLEN);
buffer[FILNMLEN] = '\0';
}
- result = buffer;
-
- /* FIXME: We should not be throwing away the information about what
- directory. It should go into dirname of the symtab, or some such
- place. */
- if ((temp = strrchr (result, '/')) != NULL)
- result = temp + 1;
- return (result);
+ return (buffer);
}
/* Set *SYMBOL to symbol number symno in symtbl. */
static void
-read_symbol (symbol, symno)
- struct internal_syment *symbol;
- int symno;
+read_symbol (struct internal_syment *symbol, int symno)
{
- if (symno < 0 || symno >= symtbl_num_syms)
+ int nsyms =
+ ((struct coff_symfile_info *) this_symtab_psymtab->objfile->sym_private)
+ ->symtbl_num_syms;
+ char *stbl =
+ ((struct coff_symfile_info *) this_symtab_psymtab->objfile->sym_private)
+ ->symtbl;
+ if (symno < 0 || symno >= nsyms)
{
- static struct complaint msg =
- {"Invalid symbol offset", 0, 0};
- complain (&msg);
+ complaint (&symfile_complaints, "Invalid symbol offset");
symbol->n_value = 0;
symbol->n_scnum = -1;
return;
}
- bfd_coff_swap_sym_in (symfile_bfd, symtbl + (symno*local_symesz), symbol);
+ bfd_coff_swap_sym_in (this_symtab_psymtab->objfile->obfd,
+ stbl + (symno * local_symesz),
+ symbol);
}
-
+
/* Get value corresponding to symbol number symno in symtbl. */
-static int
-read_symbol_nvalue (symno)
- int symno;
+static CORE_ADDR
+read_symbol_nvalue (int symno)
{
struct internal_syment symbol[1];
read_symbol (symbol, symno);
- return symbol->n_value;
+ return symbol->n_value;
}
symno is the symbol pointed to by the linetable. */
static int
-read_symbol_lineno (symno)
- int symno;
+read_symbol_lineno (int symno)
{
+ struct objfile *objfile = this_symtab_psymtab->objfile;
+ int xcoff64 = bfd_xcoff_is_xcoff64 (objfile->obfd);
+
+ struct coff_symfile_info *info =
+ (struct coff_symfile_info *)objfile->sym_private;
+ int nsyms = info->symtbl_num_syms;
+ char *stbl = info->symtbl;
+ char *strtbl = info->strtbl;
+
struct internal_syment symbol[1];
union internal_auxent main_aux[1];
+ if (symno < 0)
+ {
+ bf_notfound_complaint ();
+ return 0;
+ }
+
/* Note that just searching for a short distance (e.g. 50 symbols)
is not enough, at least in the following case.
What happens here is that the assembler moves the .stabx entries
to right before the ".bf" for foo, but the symbol for "foo" is before
all the stabx entries. See PR gdb/2222. */
- while (symno < symtbl_num_syms) {
- bfd_coff_swap_sym_in (symfile_bfd,
- symtbl + (symno*local_symesz), symbol);
- if (symbol->n_sclass == C_FCN && STREQ (symbol->n_name, ".bf"))
- goto gotit;
- symno += symbol->n_numaux+1;
- }
-
- complain (&bf_notfound_complaint);
+
+ /* Maintaining a table of .bf entries might be preferable to this search.
+ If I understand things correctly it would need to be done only for
+ the duration of a single psymtab to symtab conversion. */
+ while (symno < nsyms)
+ {
+ bfd_coff_swap_sym_in (symfile_bfd,
+ stbl + (symno * local_symesz), symbol);
+ if (symbol->n_sclass == C_FCN)
+ {
+ char *name = xcoff64 ? strtbl + symbol->n_offset : symbol->n_name;
+ if (DEPRECATED_STREQ (name, ".bf"))
+ goto gotit;
+ }
+ symno += symbol->n_numaux + 1;
+ }
+
+ bf_notfound_complaint ();
return 0;
gotit:
/* take aux entry and return its lineno */
symno++;
- bfd_coff_swap_aux_in (symfile_bfd, symtbl+(symno*local_symesz),
+ bfd_coff_swap_aux_in (objfile->obfd, stbl + symno * local_symesz,
symbol->n_type, symbol->n_sclass,
0, symbol->n_numaux, main_aux);
* mainline code can read the whole thing for efficiency.
*/
static void
-find_linenos(abfd, asect, vpinfo)
-bfd *abfd;
-sec_ptr asect;
-PTR vpinfo;
+find_linenos (struct bfd *abfd, struct bfd_section *asect, void *vpinfo)
{
struct coff_symfile_info *info;
int size, count;
count = asect->lineno_count;
- if (!STREQ (asect->name, ".text") || count == 0)
+ if (!DEPRECATED_STREQ (asect->name, ".text") || count == 0)
return;
- size = count * coff_data (symfile_bfd)->local_linesz;
- info = (struct coff_symfile_info *)vpinfo;
+ size = count * coff_data (abfd)->local_linesz;
+ info = (struct coff_symfile_info *) vpinfo;
offset = asect->line_filepos;
maxoff = offset + size;
if (maxoff > info->max_lineno_offset)
info->max_lineno_offset = maxoff;
}
+\f
+static void xcoff_psymtab_to_symtab_1 (struct partial_symtab *);
+static void
+xcoff_psymtab_to_symtab_1 (struct partial_symtab *pst)
+{
+ struct cleanup *old_chain;
+ int i;
-/* Read in all the line numbers for fast lookups later. Leave them in
- external (unswapped) format in memory; we'll swap them as we enter
- them into GDB's data structures. */
+ if (!pst)
+ return;
-static int
-init_lineno (abfd, offset, size)
- bfd *abfd;
- file_ptr offset;
- int size;
-{
- int val;
+ if (pst->readin)
+ {
+ fprintf_unfiltered
+ (gdb_stderr, "Psymtab for %s already read in. Shouldn't happen.\n",
+ pst->filename);
+ return;
+ }
- free_linetab ();
+ /* Read in all partial symtabs on which this one is dependent */
+ for (i = 0; i < pst->number_of_dependencies; i++)
+ if (!pst->dependencies[i]->readin)
+ {
+ /* Inform about additional files that need to be read in. */
+ if (info_verbose)
+ {
+ fputs_filtered (" ", gdb_stdout);
+ wrap_here ("");
+ fputs_filtered ("and ", gdb_stdout);
+ wrap_here ("");
+ printf_filtered ("%s...", pst->dependencies[i]->filename);
+ wrap_here (""); /* Flush output */
+ gdb_flush (gdb_stdout);
+ }
+ xcoff_psymtab_to_symtab_1 (pst->dependencies[i]);
+ }
- if (bfd_seek(abfd, offset, L_SET) < 0)
- return -1;
+ if (((struct symloc *) pst->read_symtab_private)->numsyms != 0)
+ {
+ /* Init stuff necessary for reading in symbols. */
+ stabsread_init ();
+ buildsym_init ();
+ old_chain = make_cleanup (really_free_pendings, 0);
- linetab = (char *) xmalloc(size);
+ read_xcoff_symtab (pst);
- val = bfd_read(linetab, 1, size, abfd);
- if (val != size)
- return -1;
+ do_cleanups (old_chain);
+ }
- linetab_offset = offset;
- linetab_size = size;
- return 0;
+ pst->readin = 1;
}
+static void xcoff_psymtab_to_symtab (struct partial_symtab *);
+
+/* Read in all of the symbols for a given psymtab for real.
+ Be verbose about it if the user wants that. */
+
static void
-free_linetab ()
+xcoff_psymtab_to_symtab (struct partial_symtab *pst)
{
- if (linetab)
- free (linetab);
- linetab = NULL;
+ bfd *sym_bfd;
+
+ if (!pst)
+ return;
+
+ if (pst->readin)
+ {
+ fprintf_unfiltered
+ (gdb_stderr, "Psymtab for %s already read in. Shouldn't happen.\n",
+ pst->filename);
+ return;
+ }
+
+ if (((struct symloc *) pst->read_symtab_private)->numsyms != 0
+ || pst->number_of_dependencies)
+ {
+ /* Print the message now, before reading the string table,
+ to avoid disconcerting pauses. */
+ if (info_verbose)
+ {
+ printf_filtered ("Reading in symbols for %s...", pst->filename);
+ gdb_flush (gdb_stdout);
+ }
+
+ sym_bfd = pst->objfile->obfd;
+
+ next_symbol_text_func = xcoff_next_symbol_text;
+
+ xcoff_psymtab_to_symtab_1 (pst);
+
+ /* Match with global symbols. This only needs to be done once,
+ after all of the symtabs and dependencies have been read in. */
+ scan_file_globals (pst->objfile);
+
+ /* Finish up the debug error message. */
+ if (info_verbose)
+ printf_filtered ("done.\n");
+ }
}
\f
static void
-xcoff_new_init (objfile)
- struct objfile *objfile;
+xcoff_new_init (struct objfile *objfile)
{
+ stabsread_new_init ();
+ buildsym_new_init ();
}
+/* Do initialization in preparation for reading symbols from OBJFILE.
-/* xcoff_symfile_init()
- is the xcoff-specific initialization routine for reading symbols.
- It is passed an objfile which contains, among other things,
- the BFD for the file whose symbols are being read, and a slot for
- a pointer to "private data" which we fill with cookies and other
- treats for xcoff_symfile_read().
-
We will only be called if this is an XCOFF or XCOFF-like file.
BFD handles figuring out the format of the file, and code in symfile.c
- uses BFD's determination to vector to us.
-
- The ultimate result is a new symtab (or, FIXME, eventually a psymtab). */
+ uses BFD's determination to vector to us. */
static void
-xcoff_symfile_init (objfile)
- struct objfile *objfile;
+xcoff_symfile_init (struct objfile *objfile)
{
- bfd *abfd = objfile->obfd;
-
/* Allocate struct to keep track of the symfile */
- objfile -> sym_private = xmmalloc (objfile -> md,
- sizeof (struct coff_symfile_info));
+ objfile->sym_private = xmmalloc (objfile->md,
+ sizeof (struct coff_symfile_info));
+
+ /* XCOFF objects may be reordered, so set OBJF_REORDERED. If we
+ find this causes a significant slowdown in gdb then we could
+ set it in the debug symbol readers only when necessary. */
+ objfile->flags |= OBJF_REORDERED;
+
init_entry_point_info (objfile);
}
objfile struct from the global list of known objfiles. */
static void
-xcoff_symfile_finish (objfile)
- struct objfile *objfile;
+xcoff_symfile_finish (struct objfile *objfile)
{
- if (objfile -> sym_private != NULL)
+ if (objfile->sym_private != NULL)
{
- mfree (objfile -> md, objfile -> sym_private);
+ xmfree (objfile->md, objfile->sym_private);
}
- /* Start with a fresh include table for the next objfile. */
-
+ /* Start with a fresh include table for the next objfile. */
if (inclTable)
{
- free (inclTable);
+ xfree (inclTable);
inclTable = NULL;
}
inclIndx = inclLength = inclDepth = 0;
}
-static int
-init_stringtab(abfd, offset, objfile)
- bfd *abfd;
- file_ptr offset;
- struct objfile *objfile;
+static void
+init_stringtab (bfd *abfd, file_ptr offset, struct objfile *objfile)
{
long length;
int val;
unsigned char lengthbuf[4];
+ char *strtbl;
+
+ ((struct coff_symfile_info *) objfile->sym_private)->strtbl = NULL;
- if (bfd_seek(abfd, offset, L_SET) < 0)
- return -1;
+ if (bfd_seek (abfd, offset, SEEK_SET) < 0)
+ error ("cannot seek to string table in %s: %s",
+ bfd_get_filename (abfd), bfd_errmsg (bfd_get_error ()));
- val = bfd_read((char *)lengthbuf, 1, sizeof lengthbuf, abfd);
- length = bfd_h_get_32(abfd, lengthbuf);
+ val = bfd_bread ((char *) lengthbuf, sizeof lengthbuf, abfd);
+ length = bfd_h_get_32 (abfd, lengthbuf);
/* If no string table is needed, then the file may end immediately
- after the symbols. Just return with `strtbl' set to null. */
+ after the symbols. Just return with `strtbl' set to NULL. */
- if (val != sizeof length || length < sizeof length)
- return 0;
+ if (val != sizeof lengthbuf || length < sizeof lengthbuf)
+ return;
- /* Allocate string table from symbol_obstack. We will need this table
+ /* Allocate string table from objfile_obstack. We will need this table
as long as we have its symbol table around. */
- strtbl = (char*) obstack_alloc (&objfile->symbol_obstack, length);
- if (strtbl == NULL)
- return -1;
+ strtbl = (char *) obstack_alloc (&objfile->objfile_obstack, length);
+ ((struct coff_symfile_info *) objfile->sym_private)->strtbl = strtbl;
- memcpy(strtbl, &length, sizeof length);
- if (length == sizeof length)
- return 0;
+ /* Copy length buffer, the first byte is usually zero and is
+ used for stabs with a name length of zero. */
+ memcpy (strtbl, lengthbuf, sizeof lengthbuf);
+ if (length == sizeof lengthbuf)
+ return;
- val = bfd_read(strtbl + sizeof length, 1, length - sizeof length, abfd);
+ val = bfd_bread (strtbl + sizeof lengthbuf, length - sizeof lengthbuf, abfd);
- if (val != length - sizeof length || strtbl[length - 1] != '\0')
- return -1;
+ if (val != length - sizeof lengthbuf)
+ error ("cannot read string table from %s: %s",
+ bfd_get_filename (abfd), bfd_errmsg (bfd_get_error ()));
+ if (strtbl[length - 1] != '\0')
+ error ("bad symbol file: string table does not end with null character");
- return 0;
+ return;
+}
+\f
+/* If we have not yet seen a function for this psymtab, this is 0. If we
+ have seen one, it is the offset in the line numbers of the line numbers
+ for the psymtab. */
+static unsigned int first_fun_line_offset;
+
+static struct partial_symtab *xcoff_start_psymtab
+ (struct objfile *, char *, int,
+ struct partial_symbol **, struct partial_symbol **);
+
+/* Allocate and partially fill a partial symtab. It will be
+ completely filled at the end of the symbol list.
+
+ SYMFILE_NAME is the name of the symbol-file we are reading from, and ADDR
+ is the address relative to which its symbols are (incremental) or 0
+ (normal). */
+
+static struct partial_symtab *
+xcoff_start_psymtab (struct objfile *objfile, char *filename, int first_symnum,
+ struct partial_symbol **global_syms,
+ struct partial_symbol **static_syms)
+{
+ struct partial_symtab *result =
+ start_psymtab_common (objfile, objfile->section_offsets,
+ filename,
+ /* We fill in textlow later. */
+ 0,
+ global_syms, static_syms);
+
+ result->read_symtab_private = (char *)
+ obstack_alloc (&objfile->objfile_obstack, sizeof (struct symloc));
+ ((struct symloc *) result->read_symtab_private)->first_symnum = first_symnum;
+ result->read_symtab = xcoff_psymtab_to_symtab;
+
+ /* Deduce the source language from the filename for this psymtab. */
+ psymtab_language = deduce_language_from_filename (filename);
+
+ return result;
}
-static int
-init_debugsection(abfd)
- bfd *abfd;
+static struct partial_symtab *xcoff_end_psymtab
+ (struct partial_symtab *, char **, int, int,
+ struct partial_symtab **, int, int);
+
+/* Close off the current usage of PST.
+ Returns PST, or NULL if the partial symtab was empty and thrown away.
+
+ CAPPING_SYMBOL_NUMBER is the end of pst (exclusive).
+
+ INCLUDE_LIST, NUM_INCLUDES, DEPENDENCY_LIST, and NUMBER_DEPENDENCIES
+ are the information for includes and dependencies. */
+
+static struct partial_symtab *
+xcoff_end_psymtab (struct partial_symtab *pst, char **include_list,
+ int num_includes, int capping_symbol_number,
+ struct partial_symtab **dependency_list,
+ int number_dependencies, int textlow_not_set)
{
- register sec_ptr secp;
- bfd_size_type length;
+ int i;
+ struct objfile *objfile = pst->objfile;
+
+ if (capping_symbol_number != -1)
+ ((struct symloc *) pst->read_symtab_private)->numsyms =
+ capping_symbol_number
+ - ((struct symloc *) pst->read_symtab_private)->first_symnum;
+ ((struct symloc *) pst->read_symtab_private)->lineno_off =
+ first_fun_line_offset;
+ first_fun_line_offset = 0;
+ pst->n_global_syms =
+ objfile->global_psymbols.next - (objfile->global_psymbols.list + pst->globals_offset);
+ pst->n_static_syms =
+ objfile->static_psymbols.next - (objfile->static_psymbols.list + pst->statics_offset);
+
+ pst->number_of_dependencies = number_dependencies;
+ if (number_dependencies)
+ {
+ pst->dependencies = (struct partial_symtab **)
+ obstack_alloc (&objfile->objfile_obstack,
+ number_dependencies * sizeof (struct partial_symtab *));
+ memcpy (pst->dependencies, dependency_list,
+ number_dependencies * sizeof (struct partial_symtab *));
+ }
+ else
+ pst->dependencies = 0;
- if (debugsec) {
- free(debugsec);
- debugsec = NULL;
- }
+ for (i = 0; i < num_includes; i++)
+ {
+ struct partial_symtab *subpst =
+ allocate_psymtab (include_list[i], objfile);
+
+ subpst->section_offsets = pst->section_offsets;
+ subpst->read_symtab_private =
+ (char *) obstack_alloc (&objfile->objfile_obstack,
+ sizeof (struct symloc));
+ ((struct symloc *) subpst->read_symtab_private)->first_symnum = 0;
+ ((struct symloc *) subpst->read_symtab_private)->numsyms = 0;
+ subpst->textlow = 0;
+ subpst->texthigh = 0;
+
+ /* We could save slight bits of space by only making one of these,
+ shared by the entire set of include files. FIXME-someday. */
+ subpst->dependencies = (struct partial_symtab **)
+ obstack_alloc (&objfile->objfile_obstack,
+ sizeof (struct partial_symtab *));
+ subpst->dependencies[0] = pst;
+ subpst->number_of_dependencies = 1;
+
+ subpst->globals_offset =
+ subpst->n_global_syms =
+ subpst->statics_offset =
+ subpst->n_static_syms = 0;
+
+ subpst->readin = 0;
+ subpst->symtab = 0;
+ subpst->read_symtab = pst->read_symtab;
+ }
- secp = bfd_get_section_by_name(abfd, ".debug");
- if (!secp)
- return 0;
+ sort_pst_symbols (pst);
- if (!(length = bfd_section_size(abfd, secp)))
- return 0;
+ /* If there is already a psymtab or symtab for a file of this name,
+ remove it. (If there is a symtab, more drastic things also
+ happen.) This happens in VxWorks. */
+ free_named_symtabs (pst->filename);
- debugsec = (char *) xmalloc ((unsigned)length);
- if (debugsec == NULL)
- return -1;
+ if (num_includes == 0
+ && number_dependencies == 0
+ && pst->n_global_syms == 0
+ && pst->n_static_syms == 0)
+ {
+ /* Throw away this psymtab, it's empty. We can't deallocate it, since
+ it is on the obstack, but we can forget to chain it on the list. */
+ /* Empty psymtabs happen as a result of header files which don't have
+ any symbols in them. There can be a lot of them. */
- if (!bfd_get_section_contents(abfd, secp, debugsec, (file_ptr) 0, length)) {
- printf_unfiltered ("Can't read .debug section from symbol file\n");
- return -1;
- }
- return 0;
+ discard_psymtab (pst);
+
+ /* Indicate that psymtab was thrown away. */
+ pst = (struct partial_symtab *) NULL;
+ }
+ return pst;
+}
+
+static void swap_sym (struct internal_syment *,
+ union internal_auxent *, char **, char **,
+ unsigned int *, struct objfile *);
+
+/* Swap raw symbol at *RAW and put the name in *NAME, the symbol in
+ *SYMBOL, the first auxent in *AUX. Advance *RAW and *SYMNUMP over
+ the symbol and its auxents. */
+
+static void
+swap_sym (struct internal_syment *symbol, union internal_auxent *aux,
+ char **name, char **raw, unsigned int *symnump,
+ struct objfile *objfile)
+{
+ bfd_coff_swap_sym_in (objfile->obfd, *raw, symbol);
+ if (symbol->n_zeroes)
+ {
+ /* If it's exactly E_SYMNMLEN characters long it isn't
+ '\0'-terminated. */
+ if (symbol->n_name[E_SYMNMLEN - 1] != '\0')
+ {
+ /* FIXME: wastes memory for symbols which we don't end up putting
+ into the minimal symbols. */
+ char *p;
+ p = obstack_alloc (&objfile->objfile_obstack, E_SYMNMLEN + 1);
+ strncpy (p, symbol->n_name, E_SYMNMLEN);
+ p[E_SYMNMLEN] = '\0';
+ *name = p;
+ }
+ else
+ /* Point to the unswapped name as that persists as long as the
+ objfile does. */
+ *name = ((struct external_syment *) *raw)->e.e_name;
+ }
+ else if (symbol->n_sclass & 0x80)
+ {
+ *name = ((struct coff_symfile_info *) objfile->sym_private)->debugsec
+ + symbol->n_offset;
+ }
+ else
+ {
+ *name = ((struct coff_symfile_info *) objfile->sym_private)->strtbl
+ + symbol->n_offset;
+ }
+ ++*symnump;
+ *raw += coff_data (objfile->obfd)->local_symesz;
+ if (symbol->n_numaux > 0)
+ {
+ bfd_coff_swap_aux_in (objfile->obfd, *raw, symbol->n_type,
+ symbol->n_sclass, 0, symbol->n_numaux, aux);
+
+ *symnump += symbol->n_numaux;
+ *raw += coff_data (objfile->obfd)->local_symesz * symbol->n_numaux;
+ }
}
static void
-free_debugsection()
+function_outside_compilation_unit_complaint (const char *arg1)
{
- if (debugsec)
- free(debugsec);
- debugsec = NULL;
+ complaint (&symfile_complaints,
+ "function `%s' appears to be defined outside of all compilation units",
+ arg1);
}
+static void
+scan_xcoff_symtab (struct objfile *objfile)
+{
+ CORE_ADDR toc_offset = 0; /* toc offset value in data section. */
+ char *filestring = NULL;
+
+ char *namestring;
+ int past_first_source_file = 0;
+ bfd *abfd;
+ asection *bfd_sect;
+ unsigned int nsyms;
+
+ /* Current partial symtab */
+ struct partial_symtab *pst;
+
+ /* List of current psymtab's include files */
+ char **psymtab_include_list;
+ int includes_allocated;
+ int includes_used;
+
+ /* Index within current psymtab dependency list */
+ struct partial_symtab **dependency_list;
+ int dependencies_used, dependencies_allocated;
+
+ char *sraw_symbol;
+ struct internal_syment symbol;
+ union internal_auxent main_aux[5];
+ unsigned int ssymnum;
+
+ char *last_csect_name = NULL; /* last seen csect's name and value */
+ CORE_ADDR last_csect_val = 0;
+ int last_csect_sec = 0;
+ int misc_func_recorded = 0; /* true if any misc. function */
+ int textlow_not_set = 1;
+
+ pst = (struct partial_symtab *) 0;
+
+ includes_allocated = 30;
+ includes_used = 0;
+ psymtab_include_list = (char **) alloca (includes_allocated *
+ sizeof (char *));
+
+ dependencies_allocated = 30;
+ dependencies_used = 0;
+ dependency_list =
+ (struct partial_symtab **) alloca (dependencies_allocated *
+ sizeof (struct partial_symtab *));
+
+ last_source_file = NULL;
-/* xcoff version of symbol file read. */
+ abfd = objfile->obfd;
+
+ sraw_symbol = ((struct coff_symfile_info *) objfile->sym_private)->symtbl;
+ nsyms = ((struct coff_symfile_info *) objfile->sym_private)->symtbl_num_syms;
+ ssymnum = 0;
+ while (ssymnum < nsyms)
+ {
+ int sclass;
+
+ QUIT;
+
+ bfd_coff_swap_sym_in (abfd, sraw_symbol, &symbol);
+ sclass = symbol.n_sclass;
+
+ switch (sclass)
+ {
+ case C_EXT:
+ case C_HIDEXT:
+ {
+ /* The CSECT auxent--always the last auxent. */
+ union internal_auxent csect_aux;
+ unsigned int symnum_before = ssymnum;
+
+ swap_sym (&symbol, &main_aux[0], &namestring, &sraw_symbol,
+ &ssymnum, objfile);
+ if (symbol.n_numaux > 1)
+ {
+ bfd_coff_swap_aux_in
+ (objfile->obfd,
+ sraw_symbol - coff_data (abfd)->local_symesz,
+ symbol.n_type,
+ symbol.n_sclass,
+ symbol.n_numaux - 1,
+ symbol.n_numaux,
+ &csect_aux);
+ }
+ else
+ csect_aux = main_aux[0];
+
+ /* If symbol name starts with ".$" or "$", ignore it. */
+ if (namestring[0] == '$'
+ || (namestring[0] == '.' && namestring[1] == '$'))
+ break;
+
+ switch (csect_aux.x_csect.x_smtyp & 0x7)
+ {
+ case XTY_SD:
+ switch (csect_aux.x_csect.x_smclas)
+ {
+ case XMC_PR:
+ if (last_csect_name)
+ {
+ /* If no misc. function recorded in the last
+ seen csect, enter it as a function. This
+ will take care of functions like strcmp()
+ compiled by xlc. */
+
+ if (!misc_func_recorded)
+ {
+ RECORD_MINIMAL_SYMBOL
+ (last_csect_name, last_csect_val,
+ mst_text, last_csect_sec,
+ objfile);
+ }
+
+ if (pst != NULL)
+ {
+ /* We have to allocate one psymtab for
+ each program csect, because their text
+ sections need not be adjacent. */
+ xcoff_end_psymtab
+ (pst, psymtab_include_list, includes_used,
+ symnum_before, dependency_list,
+ dependencies_used, textlow_not_set);
+ includes_used = 0;
+ dependencies_used = 0;
+ /* Give all psymtabs for this source file the same
+ name. */
+ pst = xcoff_start_psymtab
+ (objfile,
+ filestring,
+ symnum_before,
+ objfile->global_psymbols.next,
+ objfile->static_psymbols.next);
+ }
+ }
+ /* Activate the misc_func_recorded mechanism for
+ compiler- and linker-generated CSECTs like ".strcmp"
+ and "@FIX1". */
+ if (namestring && (namestring[0] == '.'
+ || namestring[0] == '@'))
+ {
+ last_csect_name = namestring;
+ last_csect_val = symbol.n_value;
+ last_csect_sec =
+ secnum_to_section (symbol.n_scnum, objfile);
+ }
+ if (pst != NULL)
+ {
+ CORE_ADDR highval =
+ symbol.n_value + csect_aux.x_csect.x_scnlen.l;
+ if (highval > pst->texthigh)
+ pst->texthigh = highval;
+ if (pst->textlow == 0 || symbol.n_value < pst->textlow)
+ pst->textlow = symbol.n_value;
+ }
+ misc_func_recorded = 0;
+ break;
+
+ case XMC_RW:
+ case XMC_TD:
+ /* Data variables are recorded in the minimal symbol
+ table, except for section symbols. */
+ if (*namestring != '.')
+ prim_record_minimal_symbol_and_info
+ (namestring, symbol.n_value,
+ sclass == C_HIDEXT ? mst_file_data : mst_data,
+ NULL, secnum_to_section (symbol.n_scnum, objfile),
+ NULL, objfile);
+ break;
+
+ case XMC_TC0:
+ if (toc_offset)
+ warning ("More than one XMC_TC0 symbol found.");
+ toc_offset = symbol.n_value;
+
+ /* Make TOC offset relative to start address of section. */
+ bfd_sect = secnum_to_bfd_section (symbol.n_scnum, objfile);
+ if (bfd_sect)
+ toc_offset -= bfd_section_vma (objfile->obfd, bfd_sect);
+ break;
+
+ case XMC_TC:
+ /* These symbols tell us where the TOC entry for a
+ variable is, not the variable itself. */
+ break;
+
+ default:
+ break;
+ }
+ break;
+
+ case XTY_LD:
+ switch (csect_aux.x_csect.x_smclas)
+ {
+ case XMC_PR:
+ /* A function entry point. */
+
+ if (first_fun_line_offset == 0 && symbol.n_numaux > 1)
+ first_fun_line_offset =
+ main_aux[0].x_sym.x_fcnary.x_fcn.x_lnnoptr;
+ RECORD_MINIMAL_SYMBOL
+ (namestring, symbol.n_value,
+ sclass == C_HIDEXT ? mst_file_text : mst_text,
+ secnum_to_section (symbol.n_scnum, objfile),
+ objfile);
+ break;
+
+ case XMC_GL:
+ /* shared library function trampoline code entry
+ point. */
+
+ /* record trampoline code entries as
+ mst_solib_trampoline symbol. When we lookup mst
+ symbols, we will choose mst_text over
+ mst_solib_trampoline. */
+ RECORD_MINIMAL_SYMBOL
+ (namestring, symbol.n_value,
+ mst_solib_trampoline,
+ secnum_to_section (symbol.n_scnum, objfile),
+ objfile);
+ break;
+
+ case XMC_DS:
+ /* The symbols often have the same names as
+ debug symbols for functions, and confuse
+ lookup_symbol. */
+ break;
+
+ default:
+
+ /* xlc puts each variable in a separate csect,
+ so we get an XTY_SD for each variable. But
+ gcc puts several variables in a csect, so
+ that each variable only gets an XTY_LD. We
+ still need to record them. This will
+ typically be XMC_RW; I suspect XMC_RO and
+ XMC_BS might be possible too. */
+ if (*namestring != '.')
+ prim_record_minimal_symbol_and_info
+ (namestring, symbol.n_value,
+ sclass == C_HIDEXT ? mst_file_data : mst_data,
+ NULL, secnum_to_section (symbol.n_scnum, objfile),
+ NULL, objfile);
+ break;
+ }
+ break;
+
+ case XTY_CM:
+ switch (csect_aux.x_csect.x_smclas)
+ {
+ case XMC_RW:
+ case XMC_BS:
+ /* Common variables are recorded in the minimal symbol
+ table, except for section symbols. */
+ if (*namestring != '.')
+ prim_record_minimal_symbol_and_info
+ (namestring, symbol.n_value,
+ sclass == C_HIDEXT ? mst_file_bss : mst_bss,
+ NULL, secnum_to_section (symbol.n_scnum, objfile),
+ NULL, objfile);
+ break;
+ }
+ break;
+
+ default:
+ break;
+ }
+ }
+ break;
+ case C_FILE:
+ {
+ unsigned int symnum_before;
+
+ symnum_before = ssymnum;
+ swap_sym (&symbol, &main_aux[0], &namestring, &sraw_symbol,
+ &ssymnum, objfile);
+
+ /* See if the last csect needs to be recorded. */
+
+ if (last_csect_name && !misc_func_recorded)
+ {
+
+ /* If no misc. function recorded in the last seen csect, enter
+ it as a function. This will take care of functions like
+ strcmp() compiled by xlc. */
+
+ RECORD_MINIMAL_SYMBOL
+ (last_csect_name, last_csect_val,
+ mst_text, last_csect_sec, objfile);
+ }
+
+ if (pst)
+ {
+ xcoff_end_psymtab (pst, psymtab_include_list, includes_used,
+ symnum_before, dependency_list,
+ dependencies_used, textlow_not_set);
+ includes_used = 0;
+ dependencies_used = 0;
+ }
+ first_fun_line_offset = 0;
+
+ /* XCOFF, according to the AIX 3.2 documentation, puts the
+ filename in cs->c_name. But xlc 1.3.0.2 has decided to
+ do things the standard COFF way and put it in the auxent.
+ We use the auxent if the symbol is ".file" and an auxent
+ exists, otherwise use the symbol itself. */
+ if (!strcmp (namestring, ".file") && symbol.n_numaux > 0)
+ {
+ filestring = coff_getfilename (&main_aux[0], objfile);
+ }
+ else
+ filestring = namestring;
+
+ pst = xcoff_start_psymtab (objfile,
+ filestring,
+ symnum_before,
+ objfile->global_psymbols.next,
+ objfile->static_psymbols.next);
+ last_csect_name = NULL;
+ }
+ break;
+
+ default:
+ {
+ complaint (&symfile_complaints,
+ "Storage class %d not recognized during scan", sclass);
+ }
+ /* FALLTHROUGH */
+
+ /* C_FCN is .bf and .ef symbols. I think it is sufficient
+ to handle only the C_FUN and C_EXT. */
+ case C_FCN:
+
+ case C_BSTAT:
+ case C_ESTAT:
+ case C_ARG:
+ case C_REGPARM:
+ case C_REG:
+ case C_TPDEF:
+ case C_STRTAG:
+ case C_UNTAG:
+ case C_ENTAG:
+ case C_LABEL:
+ case C_NULL:
+
+ /* C_EINCL means we are switching back to the main file. But there
+ is no reason to care; the only thing we want to know about
+ includes is the names of all the included (.h) files. */
+ case C_EINCL:
+
+ case C_BLOCK:
+
+ /* I don't think C_STAT is used in xcoff; C_HIDEXT appears to be
+ used instead. */
+ case C_STAT:
+
+ /* I don't think the name of the common block (as opposed to the
+ variables within it) is something which is user visible
+ currently. */
+ case C_BCOMM:
+ case C_ECOMM:
+
+ case C_PSYM:
+ case C_RPSYM:
+
+ /* I think we can ignore C_LSYM; types on xcoff seem to use C_DECL
+ so C_LSYM would appear to be only for locals. */
+ case C_LSYM:
+
+ case C_AUTO:
+ case C_RSYM:
+ {
+ /* We probably could save a few instructions by assuming that
+ C_LSYM, C_PSYM, etc., never have auxents. */
+ int naux1 = symbol.n_numaux + 1;
+ ssymnum += naux1;
+ sraw_symbol += bfd_coff_symesz (abfd) * naux1;
+ }
+ break;
+
+ case C_BINCL:
+ {
+ /* Mark down an include file in the current psymtab */
+ enum language tmp_language;
+ swap_sym (&symbol, &main_aux[0], &namestring, &sraw_symbol,
+ &ssymnum, objfile);
+
+ tmp_language = deduce_language_from_filename (namestring);
+
+ /* Only change the psymtab's language if we've learned
+ something useful (eg. tmp_language is not language_unknown).
+ In addition, to match what start_subfile does, never change
+ from C++ to C. */
+ if (tmp_language != language_unknown
+ && (tmp_language != language_c
+ || psymtab_language != language_cplus))
+ psymtab_language = tmp_language;
+
+ /* In C++, one may expect the same filename to come round many
+ times, when code is coming alternately from the main file
+ and from inline functions in other files. So I check to see
+ if this is a file we've seen before -- either the main
+ source file, or a previously included file.
+
+ This seems to be a lot of time to be spending on N_SOL, but
+ things like "break c-exp.y:435" need to work (I
+ suppose the psymtab_include_list could be hashed or put
+ in a binary tree, if profiling shows this is a major hog). */
+ if (pst && DEPRECATED_STREQ (namestring, pst->filename))
+ continue;
+ {
+ int i;
+ for (i = 0; i < includes_used; i++)
+ if (DEPRECATED_STREQ (namestring, psymtab_include_list[i]))
+ {
+ i = -1;
+ break;
+ }
+ if (i == -1)
+ continue;
+ }
+ psymtab_include_list[includes_used++] = namestring;
+ if (includes_used >= includes_allocated)
+ {
+ char **orig = psymtab_include_list;
+
+ psymtab_include_list = (char **)
+ alloca ((includes_allocated *= 2) *
+ sizeof (char *));
+ memcpy (psymtab_include_list, orig,
+ includes_used * sizeof (char *));
+ }
+ continue;
+ }
+ case C_FUN:
+ /* The value of the C_FUN is not the address of the function (it
+ appears to be the address before linking), but as long as it
+ is smaller than the actual address, then find_pc_partial_function
+ will use the minimal symbols instead. I hope. */
+
+ case C_GSYM:
+ case C_ECOML:
+ case C_DECL:
+ case C_STSYM:
+ {
+ char *p;
+ swap_sym (&symbol, &main_aux[0], &namestring, &sraw_symbol,
+ &ssymnum, objfile);
+
+ p = (char *) strchr (namestring, ':');
+ if (!p)
+ continue; /* Not a debugging symbol. */
+
+ /* Main processing section for debugging symbols which
+ the initial read through the symbol tables needs to worry
+ about. If we reach this point, the symbol which we are
+ considering is definitely one we are interested in.
+ p must also contain the (valid) index into the namestring
+ which indicates the debugging type symbol. */
+
+ switch (p[1])
+ {
+ case 'S':
+ symbol.n_value += ANOFFSET (objfile->section_offsets, SECT_OFF_DATA (objfile));
+#ifdef STATIC_TRANSFORM_NAME
+ namestring = STATIC_TRANSFORM_NAME (namestring);
+#endif
+ add_psymbol_to_list (namestring, p - namestring,
+ VAR_DOMAIN, LOC_STATIC,
+ &objfile->static_psymbols,
+ 0, symbol.n_value,
+ psymtab_language, objfile);
+ continue;
+
+ case 'G':
+ symbol.n_value += ANOFFSET (objfile->section_offsets, SECT_OFF_DATA (objfile));
+ /* The addresses in these entries are reported to be
+ wrong. See the code that reads 'G's for symtabs. */
+ add_psymbol_to_list (namestring, p - namestring,
+ VAR_DOMAIN, LOC_STATIC,
+ &objfile->global_psymbols,
+ 0, symbol.n_value,
+ psymtab_language, objfile);
+ continue;
+
+ case 'T':
+ /* When a 'T' entry is defining an anonymous enum, it
+ may have a name which is the empty string, or a
+ single space. Since they're not really defining a
+ symbol, those shouldn't go in the partial symbol
+ table. We do pick up the elements of such enums at
+ 'check_enum:', below. */
+ if (p >= namestring + 2
+ || (p == namestring + 1
+ && namestring[0] != ' '))
+ {
+ add_psymbol_to_list (namestring, p - namestring,
+ STRUCT_DOMAIN, LOC_TYPEDEF,
+ &objfile->static_psymbols,
+ symbol.n_value, 0,
+ psymtab_language, objfile);
+ if (p[2] == 't')
+ {
+ /* Also a typedef with the same name. */
+ add_psymbol_to_list (namestring, p - namestring,
+ VAR_DOMAIN, LOC_TYPEDEF,
+ &objfile->static_psymbols,
+ symbol.n_value, 0,
+ psymtab_language, objfile);
+ p += 1;
+ }
+ }
+ goto check_enum;
+
+ case 't':
+ if (p != namestring) /* a name is there, not just :T... */
+ {
+ add_psymbol_to_list (namestring, p - namestring,
+ VAR_DOMAIN, LOC_TYPEDEF,
+ &objfile->static_psymbols,
+ symbol.n_value, 0,
+ psymtab_language, objfile);
+ }
+ check_enum:
+ /* If this is an enumerated type, we need to
+ add all the enum constants to the partial symbol
+ table. This does not cover enums without names, e.g.
+ "enum {a, b} c;" in C, but fortunately those are
+ rare. There is no way for GDB to find those from the
+ enum type without spending too much time on it. Thus
+ to solve this problem, the compiler needs to put out the
+ enum in a nameless type. GCC2 does this. */
+
+ /* We are looking for something of the form
+ <name> ":" ("t" | "T") [<number> "="] "e"
+ {<constant> ":" <value> ","} ";". */
+
+ /* Skip over the colon and the 't' or 'T'. */
+ p += 2;
+ /* This type may be given a number. Also, numbers can come
+ in pairs like (0,26). Skip over it. */
+ while ((*p >= '0' && *p <= '9')
+ || *p == '(' || *p == ',' || *p == ')'
+ || *p == '=')
+ p++;
+
+ if (*p++ == 'e')
+ {
+ /* The aix4 compiler emits extra crud before the members. */
+ if (*p == '-')
+ {
+ /* Skip over the type (?). */
+ while (*p != ':')
+ p++;
+
+ /* Skip over the colon. */
+ p++;
+ }
+
+ /* We have found an enumerated type. */
+ /* According to comments in read_enum_type
+ a comma could end it instead of a semicolon.
+ I don't know where that happens.
+ Accept either. */
+ while (*p && *p != ';' && *p != ',')
+ {
+ char *q;
+
+ /* Check for and handle cretinous dbx symbol name
+ continuation! */
+ if (*p == '\\' || (*p == '?' && p[1] == '\0'))
+ p = next_symbol_text (objfile);
+
+ /* Point to the character after the name
+ of the enum constant. */
+ for (q = p; *q && *q != ':'; q++)
+ ;
+ /* Note that the value doesn't matter for
+ enum constants in psymtabs, just in symtabs. */
+ add_psymbol_to_list (p, q - p,
+ VAR_DOMAIN, LOC_CONST,
+ &objfile->static_psymbols, 0,
+ 0, psymtab_language, objfile);
+ /* Point past the name. */
+ p = q;
+ /* Skip over the value. */
+ while (*p && *p != ',')
+ p++;
+ /* Advance past the comma. */
+ if (*p)
+ p++;
+ }
+ }
+ continue;
+
+ case 'c':
+ /* Constant, e.g. from "const" in Pascal. */
+ add_psymbol_to_list (namestring, p - namestring,
+ VAR_DOMAIN, LOC_CONST,
+ &objfile->static_psymbols, symbol.n_value,
+ 0, psymtab_language, objfile);
+ continue;
+
+ case 'f':
+ if (! pst)
+ {
+ int name_len = p - namestring;
+ char *name = xmalloc (name_len + 1);
+ memcpy (name, namestring, name_len);
+ name[name_len] = '\0';
+ function_outside_compilation_unit_complaint (name);
+ xfree (name);
+ }
+ symbol.n_value += ANOFFSET (objfile->section_offsets, SECT_OFF_TEXT (objfile));
+ add_psymbol_to_list (namestring, p - namestring,
+ VAR_DOMAIN, LOC_BLOCK,
+ &objfile->static_psymbols,
+ 0, symbol.n_value,
+ psymtab_language, objfile);
+ continue;
+
+ /* Global functions were ignored here, but now they
+ are put into the global psymtab like one would expect.
+ They're also in the minimal symbol table. */
+ case 'F':
+ if (! pst)
+ {
+ int name_len = p - namestring;
+ char *name = xmalloc (name_len + 1);
+ memcpy (name, namestring, name_len);
+ name[name_len] = '\0';
+ function_outside_compilation_unit_complaint (name);
+ xfree (name);
+ }
+ symbol.n_value += ANOFFSET (objfile->section_offsets, SECT_OFF_TEXT (objfile));
+ add_psymbol_to_list (namestring, p - namestring,
+ VAR_DOMAIN, LOC_BLOCK,
+ &objfile->global_psymbols,
+ 0, symbol.n_value,
+ psymtab_language, objfile);
+ continue;
+
+ /* Two things show up here (hopefully); static symbols of
+ local scope (static used inside braces) or extensions
+ of structure symbols. We can ignore both. */
+ case 'V':
+ case '(':
+ case '0':
+ case '1':
+ case '2':
+ case '3':
+ case '4':
+ case '5':
+ case '6':
+ case '7':
+ case '8':
+ case '9':
+ case '-':
+ case '#': /* for symbol identification (used in live ranges) */
+ continue;
+
+ case ':':
+ /* It is a C++ nested symbol. We don't need to record it
+ (I don't think); if we try to look up foo::bar::baz,
+ then symbols for the symtab containing foo should get
+ read in, I think. */
+ /* Someone says sun cc puts out symbols like
+ /foo/baz/maclib::/usr/local/bin/maclib,
+ which would get here with a symbol type of ':'. */
+ continue;
+
+ default:
+ /* Unexpected symbol descriptor. The second and subsequent stabs
+ of a continued stab can show up here. The question is
+ whether they ever can mimic a normal stab--it would be
+ nice if not, since we certainly don't want to spend the
+ time searching to the end of every string looking for
+ a backslash. */
+
+ complaint (&symfile_complaints,
+ "unknown symbol descriptor `%c'", p[1]);
+
+ /* Ignore it; perhaps it is an extension that we don't
+ know about. */
+ continue;
+ }
+ }
+ }
+ }
+
+ if (pst)
+ {
+ xcoff_end_psymtab (pst, psymtab_include_list, includes_used,
+ ssymnum, dependency_list,
+ dependencies_used, textlow_not_set);
+ }
+
+ /* Record the toc offset value of this symbol table into objfile structure.
+ If no XMC_TC0 is found, toc_offset should be zero. Another place to obtain
+ this information would be file auxiliary header. */
+
+ ((struct coff_symfile_info *) objfile->sym_private)->toc_offset = toc_offset;
+}
+
+/* Return the toc offset value for a given objfile. */
+
+CORE_ADDR
+get_toc_offset (struct objfile *objfile)
+{
+ if (objfile)
+ return ((struct coff_symfile_info *) objfile->sym_private)->toc_offset;
+ return 0;
+}
+
+/* Scan and build partial symbols for a symbol file.
+ We have been initialized by a call to dbx_symfile_init, which
+ put all the relevant info into a "struct dbx_symfile_info",
+ hung off the objfile structure.
+
+ SECTION_OFFSETS contains offsets relative to which the symbols in the
+ various sections are (depending where the sections were actually loaded).
+ MAINLINE is true if we are reading the main symbol
+ table (as opposed to a shared lib or dynamically loaded file). */
static void
-xcoff_symfile_read (objfile, section_offset, mainline)
- struct objfile *objfile;
- struct section_offsets *section_offset;
- int mainline;
+xcoff_initial_scan (struct objfile *objfile, int mainline)
{
- int num_symbols; /* # of symbols */
- file_ptr symtab_offset; /* symbol table and */
- file_ptr stringtab_offset; /* string table file offsets */
- int val;
bfd *abfd;
+ int val;
+ struct cleanup *back_to;
+ int num_symbols; /* # of symbols */
+ file_ptr symtab_offset; /* symbol table and */
+ file_ptr stringtab_offset; /* string table file offsets */
struct coff_symfile_info *info;
char *name;
- struct cleanup *back_to = make_cleanup (null_cleanup, 0);
+ unsigned int size;
- info = (struct coff_symfile_info *) objfile -> sym_private;
+ info = (struct coff_symfile_info *) objfile->sym_private;
symfile_bfd = abfd = objfile->obfd;
name = objfile->name;
num_symbols = bfd_get_symcount (abfd); /* # of symbols */
symtab_offset = obj_sym_filepos (abfd); /* symbol table file offset */
stringtab_offset = symtab_offset +
- num_symbols * coff_data(abfd)->local_symesz;
+ num_symbols * coff_data (abfd)->local_symesz;
info->min_lineno_offset = 0;
info->max_lineno_offset = 0;
bfd_map_over_sections (abfd, find_linenos, info);
- /* FIXME! This stuff should move into symfile_init */
- if (info->min_lineno_offset != 0
- && info->max_lineno_offset > info->min_lineno_offset) {
-
- /* only read in the line # table if one exists */
- make_cleanup (free_linetab, 0);
- val = init_lineno(abfd, info->min_lineno_offset,
- (int) (info->max_lineno_offset - info->min_lineno_offset));
-
- if (val < 0)
- error("\"%s\": error reading line numbers\n", name);
- }
-
if (num_symbols > 0)
{
- val = init_stringtab(abfd, stringtab_offset, objfile);
- if (val < 0) {
- error ("\"%s\": can't get string table", name);
- }
+ /* Read the string table. */
+ init_stringtab (abfd, stringtab_offset, objfile);
- if (init_debugsection(abfd) < 0) {
- error ("Error reading .debug section of `%s'\n", name);
+ /* Read the .debug section, if present. */
+ {
+ struct bfd_section *secp;
+ bfd_size_type length;
+ char *debugsec = NULL;
+
+ secp = bfd_get_section_by_name (abfd, ".debug");
+ if (secp)
+ {
+ length = bfd_section_size (abfd, secp);
+ if (length)
+ {
+ debugsec =
+ (char *) obstack_alloc (&objfile->objfile_obstack, length);
+
+ if (!bfd_get_section_contents (abfd, secp, debugsec,
+ (file_ptr) 0, length))
+ {
+ error ("Error reading .debug section of `%s': %s",
+ name, bfd_errmsg (bfd_get_error ()));
+ }
+ }
+ }
+ ((struct coff_symfile_info *) objfile->sym_private)->debugsec =
+ debugsec;
}
}
- /* Position to read the symbol table. Do not read it all at once. */
- val = bfd_seek(abfd, symtab_offset, L_SET);
+ /* Read the symbols. We keep them in core because we will want to
+ access them randomly in read_symbol*. */
+ val = bfd_seek (abfd, symtab_offset, SEEK_SET);
if (val < 0)
- perror_with_name(name);
-
- if (bfd_tell(abfd) != symtab_offset)
- fatal("bfd? BFD!");
-
- init_minimal_symbol_collection ();
- make_cleanup (discard_minimal_symbols, 0);
+ error ("Error reading symbols from %s: %s",
+ name, bfd_errmsg (bfd_get_error ()));
+ size = coff_data (abfd)->local_symesz * num_symbols;
+ ((struct coff_symfile_info *) objfile->sym_private)->symtbl =
+ obstack_alloc (&objfile->objfile_obstack, size);
+ ((struct coff_symfile_info *) objfile->sym_private)->symtbl_num_syms =
+ num_symbols;
+
+ val = bfd_bread (((struct coff_symfile_info *) objfile->sym_private)->symtbl,
+ size, abfd);
+ if (val != size)
+ perror_with_name ("reading symbol table");
-#ifndef FAKING_RS6000
- /* Initialize load info structure. */
- if (mainline)
- xcoff_init_loadinfo ();
-#endif
+ /* If we are reinitializing, or if we have never loaded syms yet, init */
+ if (mainline
+ || (objfile->global_psymbols.size == 0
+ && objfile->static_psymbols.size == 0))
+ /* I'm not sure how how good num_symbols is; the rule of thumb in
+ init_psymbol_list was developed for a.out. On the one hand,
+ num_symbols includes auxents. On the other hand, it doesn't
+ include N_SLINE. */
+ init_psymbol_list (objfile, num_symbols);
- /* Now that the executable file is positioned at symbol table,
- process it and define symbols accordingly. */
+ free_pending_blocks ();
+ back_to = make_cleanup (really_free_pendings, 0);
- read_xcoff_symtab(objfile, num_symbols);
+ init_minimal_symbol_collection ();
+ make_cleanup_discard_minimal_symbols ();
- /* Free debug section. */
- free_debugsection ();
+ /* Now that the symbol table data of the executable file are all in core,
+ process them and define symbols accordingly. */
- /* Sort symbols alphabetically within each block. */
- {
- struct symtab *s;
- for (s = objfile -> symtabs; s != NULL; s = s -> next)
- {
- sort_symtab_syms (s);
- }
- }
+ scan_xcoff_symtab (objfile);
/* Install any minimal symbols that have been collected as the current
minimal symbols for this objfile. */
do_cleanups (back_to);
}
-
-static struct section_offsets *
-xcoff_symfile_offsets (objfile, addr)
- struct objfile *objfile;
- CORE_ADDR addr;
+\f
+static void
+xcoff_symfile_offsets (struct objfile *objfile, struct section_addr_info *addrs)
{
- struct section_offsets *section_offsets;
+ asection *sect = NULL;
int i;
- objfile->num_sections = SECT_OFF_MAX;
- section_offsets = (struct section_offsets *)
- obstack_alloc
- (&objfile -> psymbol_obstack,
- sizeof (struct section_offsets)
- + sizeof (section_offsets->offsets) * objfile->num_sections);
-
- /* syms_from_objfile kindly subtracts from addr the bfd_section_vma
- of the .text section. This strikes me as wrong--whether the
- offset to be applied to symbol reading is relative to the start
- address of the section depends on the symbol format. In any
- event, this whole "addr" concept is pretty broken (it doesn't
- handle any section but .text sensibly), so just ignore the addr
- parameter and use 0. That matches the fact that xcoff_symfile_read
- ignores the section_offsets). */
- for (i = 0; i < objfile->num_sections; ++i)
- ANOFFSET (section_offsets, i) = 0;
+ objfile->num_sections = bfd_count_sections (objfile->obfd);
+ objfile->section_offsets = (struct section_offsets *)
+ obstack_alloc (&objfile->objfile_obstack,
+ SIZEOF_N_SECTION_OFFSETS (objfile->num_sections));
+
+ /* Initialize the section indexes for future use. */
+ sect = bfd_get_section_by_name (objfile->obfd, ".text");
+ if (sect)
+ objfile->sect_index_text = sect->index;
- return section_offsets;
+ sect = bfd_get_section_by_name (objfile->obfd, ".data");
+ if (sect)
+ objfile->sect_index_data = sect->index;
+
+ sect = bfd_get_section_by_name (objfile->obfd, ".bss");
+ if (sect)
+ objfile->sect_index_bss = sect->index;
+
+ sect = bfd_get_section_by_name (objfile->obfd, ".rodata");
+ if (sect)
+ objfile->sect_index_rodata = sect->index;
+
+ for (i = 0; i < objfile->num_sections; ++i)
+ {
+ /* syms_from_objfile kindly subtracts from addr the
+ bfd_section_vma of the .text section. This strikes me as
+ wrong--whether the offset to be applied to symbol reading is
+ relative to the start address of the section depends on the
+ symbol format. In any event, this whole "addr" concept is
+ pretty broken (it doesn't handle any section but .text
+ sensibly), so just ignore the addr parameter and use 0.
+ rs6000-nat.c will set the correct section offsets via
+ objfile_relocate. */
+ (objfile->section_offsets)->offsets[i] = 0;
+ }
}
/* Register our ability to parse symbols for xcoff BFD files. */
static struct sym_fns xcoff_sym_fns =
{
- /* Because the bfd uses coff_flavour, we need to specially kludge
- the flavour. It is possible that coff and xcoff should be merged as
+ /* It is possible that coff and xcoff should be merged as
they do have fundamental similarities (for example, the extra storage
classes used for stabs could presumably be recognized in any COFF file).
However, in addition to obvious things like all the csect hair, there are
some subtler differences between xcoffread.c and coffread.c, notably
the fact that coffread.c has no need to read in all the symbols, but
xcoffread.c reads all the symbols and does in fact randomly access them
- (in C_BSTAT and B_BINCL processing). */
+ (in C_BSTAT and line number processing). */
- (enum bfd_flavour)-1,
+ bfd_target_xcoff_flavour,
- xcoff_new_init, /* sym_new_init: init anything gbl to entire symtab */
- xcoff_symfile_init, /* sym_init: read initial info, setup for sym_read() */
- xcoff_symfile_read, /* sym_read: read a symbol file into symtab */
- xcoff_symfile_finish, /* sym_finish: finished with file, cleanup */
- xcoff_symfile_offsets, /* sym_offsets: xlate offsets ext->int form */
- NULL /* next: pointer to next struct sym_fns */
+ xcoff_new_init, /* sym_new_init: init anything gbl to entire symtab */
+ xcoff_symfile_init, /* sym_init: read initial info, setup for sym_read() */
+ xcoff_initial_scan, /* sym_read: read a symbol file into symtab */
+ xcoff_symfile_finish, /* sym_finish: finished with file, cleanup */
+ xcoff_symfile_offsets, /* sym_offsets: xlate offsets ext->int form */
+ NULL /* next: pointer to next struct sym_fns */
};
void
-_initialize_xcoffread ()
+_initialize_xcoffread (void)
{
- add_symtab_fns(&xcoff_sym_fns);
-
- /* Initialize symbol template later used for arguments. Its other
- fields are zero, or are filled in later. */
- SYMBOL_NAME (&parmsym) = "";
- SYMBOL_INIT_LANGUAGE_SPECIFIC (&parmsym, language_c);
- SYMBOL_NAMESPACE (&parmsym) = VAR_NAMESPACE;
- SYMBOL_CLASS (&parmsym) = LOC_ARG;
+ add_symtab_fns (&xcoff_sym_fns);
func_symbol_type = init_type (TYPE_CODE_FUNC, 1, 0,
"<function, no debug info>", NULL);