/* Read AIX xcoff symbol tables and convert to internal format, for GDB.
- Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
+ Copyright 1986, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 1997
Free Software Foundation, Inc.
Derived from coffread.c, dbxread.c, and a lot of hacking.
Contributed by IBM Corporation.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
-
-/* Native only: Need struct tbtable in <sys/debug.h> from host, and
- need xcoff_add_toc_to_loadinfo in rs6000-tdep.c from target.
- need xcoff_init_loadinfo ditto.
- However, if you grab <sys/debug.h> and make it available on your
- host, and define FAKING_RS6000, then this code will compile. */
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "defs.h"
#include "bfd.h"
-/* AIX XCOFF names have a preceeding dot `.' */
-#define NAMES_HAVE_DOT 1
-
#include <sys/types.h>
#include <fcntl.h>
#include <ctype.h>
+#include "gdb_string.h"
-#include "obstack.h"
#include <sys/param.h>
#ifndef NO_SYS_FILE
#include <sys/file.h>
#endif
-#include <sys/stat.h>
-#include <sys/debug.h>
+#include "gdb_stat.h"
+
+#include "coff/internal.h"
+#include "libcoff.h" /* FIXME, internal data from BFD */
+#include "coff/rs6000.h"
#include "symtab.h"
#include "gdbtypes.h"
#include "objfiles.h"
#include "buildsym.h"
#include "stabsread.h"
-#include "gdb-stabs.h"
+#include "expression.h"
+#include "language.h" /* Needed inside partial-stab.h */
#include "complaints.h"
-#include "coff/internal.h" /* FIXME, internal data from BFD */
-#include "libcoff.h" /* FIXME, internal data from BFD */
-#include "coff/rs6000.h" /* FIXME, raw file-format guts of xcoff */
+#include "gdb-stabs.h"
+
+/* For interface with stabsread.c. */
+#include "aout/stab_gnu.h"
+
+/* For interface with partial-stab.h. */
+#define N_UNDF 0 /* Undefined symbol */
+#undef N_ABS
+#define N_ABS 2
+#define N_TEXT 4 /* Text sym -- defined at offset in text seg */
+#define N_DATA 6 /* Data sym -- defined at offset in data seg */
+#define N_BSS 8 /* BSS sym -- defined at offset in zero'd seg */
+#define N_COMM 0x12 /* Common symbol (visible after shared lib dynlink) */
+#define N_FN 0x1f /* File name of .o file */
+#define N_FN_SEQ 0x0C /* N_FN from Sequent compilers (sigh) */
+/* Note: N_EXT can only be usefully OR-ed with N_UNDF, N_ABS, N_TEXT,
+ N_DATA, or N_BSS. When the low-order bit of other types is set,
+ (e.g. N_WARNING versus N_FN), they are two different types. */
+#define N_EXT 1 /* External symbol (as opposed to local-to-this-file) */
+#define N_INDR 0x0a
+
+/* The following symbols refer to set elements.
+ All the N_SET[ATDB] symbols with the same name form one set.
+ Space is allocated for the set in the text section, and each set
+ elements value is stored into one word of the space.
+ The first word of the space is the length of the set (number of elements).
+
+ The address of the set is made into an N_SETV symbol
+ whose name is the same as the name of the set.
+ This symbol acts like a N_DATA global symbol
+ in that it can satisfy undefined external references. */
+
+/* These appear as input to LD, in a .o file. */
+#define N_SETA 0x14 /* Absolute set element symbol */
+#define N_SETT 0x16 /* Text set element symbol */
+#define N_SETD 0x18 /* Data set element symbol */
+#define N_SETB 0x1A /* Bss set element symbol */
+
+/* This is output from LD. */
+#define N_SETV 0x1C /* Pointer to set vector in data area. */
+\f
+/* We put a pointer to this structure in the read_symtab_private field
+ of the psymtab. */
+
+struct symloc {
+
+ /* First symbol number for this file. */
+
+ int first_symnum;
+ /* Number of symbols in the section of the symbol table devoted to
+ this file's symbols (actually, the section bracketed may contain
+ more than just this file's symbols). If numsyms is 0, the only
+ reason for this thing's existence is the dependency list. Nothing
+ else will happen when it is read in. */
-/* Define this if you want gdb use the old xcoff symbol processing. This
- way it won't use common `define_symbol()' function and Sun dbx stab
- string grammar. And likely it won't be able to do G++ debugging. */
+ int numsyms;
-/* #define NO_DEFINE_SYMBOL 1 */
+ /* Position of the start of the line number information for this psymtab. */
+ unsigned int lineno_off;
+};
-/* Define this if you want gdb to ignore typdef stabs. This was needed for
- one of Transarc, to reduce the size of the symbol table. Types won't be
- recognized, but tag names will be. */
+/* Remember what we deduced to be the source language of this psymtab. */
-/* #define NO_TYPEDEFS 1 */
+static enum language psymtab_language = language_unknown;
+\f
/* Simplified internal version of coff symbol table information */
struct coff_symbol {
char *c_name;
int c_symnum; /* symbol number of this entry */
- int c_nsyms; /* 0 if syment only, 1 if syment + auxent */
+ int c_naux; /* 0 if syment only, 1 if syment + auxent */
long c_value;
- int c_sclass;
+ unsigned char c_sclass;
int c_secnum;
unsigned int c_type;
};
-/* The COFF line table, in raw form. */
-static char *linetab = NULL; /* Its actual contents */
-static long linetab_offset; /* Its offset in the file */
-static unsigned long linetab_size; /* Its size */
-
/* last function's saved coff symbol `cs' */
static struct coff_symbol fcn_cs_saved;
static CORE_ADDR first_object_file_end;
-/* pointer to the string table */
-static char *strtbl;
-
-/* length of the string table */
-static int strtbl_len;
-
-/* pointer to debug section */
-static char *debugsec;
-
-/* pointer to the a.out symbol table */
-static char *symtbl;
-
-/* Number of symbols in symtbl. */
-static int symtbl_num_syms;
-
/* initial symbol-table-debug-string vector length */
#define INITIAL_STABVECTOR_LENGTH 40
int within_function;
-/* Local variables that hold the shift and mask values for the
- COFF file that we are currently reading. These come back to us
- from BFD, and are referenced by their macro names, as well as
- internally to the BTYPE, ISPTR, ISFCN, ISARY, ISTAG, and DECREF
- macros from ../internalcoff.h . */
-
-static unsigned local_n_btshft;
-static unsigned local_n_tmask;
-
-#undef N_BTSHFT
-#define N_BTSHFT local_n_btshft
-#undef N_TMASK
-#define N_TMASK local_n_tmask
-
-/* Local variables that hold the sizes in the file of various COFF structures.
- (We only need to know this to read them from the file -- BFD will then
- translate the data in them, into `internal_xxx' structs in the right
- byte order, alignment, etc.) */
+/* Size of a COFF symbol. I think it is always 18, so I'm not sure
+ there is any reason not to just use a #define, but might as well
+ ask BFD for the size and store it here, I guess. */
static unsigned local_symesz;
struct coff_symfile_info {
file_ptr min_lineno_offset; /* Where in file lowest line#s are */
file_ptr max_lineno_offset; /* 1+last byte of line#s in file */
-};
-static struct complaint rsym_complaint =
- {"Non-stab C_RSYM `%s' needs special handling", 0, 0};
+ /* Pointer to the string table. */
+ char *strtbl;
+
+ /* Pointer to debug section. */
+ char *debugsec;
+
+ /* Pointer to the a.out symbol table. */
+ char *symtbl;
+
+ /* Number of symbols in symtbl. */
+ int symtbl_num_syms;
+
+ /* Offset in data section to TOC anchor. */
+ CORE_ADDR toc_offset;
+};
static struct complaint storclass_complaint =
{"Unexpected storage class: %d", 0, 0};
static struct complaint bf_notfound_complaint =
{"line numbers off, `.bf' symbol not found", 0, 0};
+static struct complaint ef_complaint =
+ {"Mismatched .ef symbol ignored starting at symnum %d", 0, 0};
+
+static struct complaint eb_complaint =
+ {"Mismatched .eb symbol ignored starting at symnum %d", 0, 0};
+
static void
-enter_line_range PARAMS ((struct subfile *, unsigned, unsigned,
- CORE_ADDR, CORE_ADDR, unsigned *));
+xcoff_initial_scan PARAMS ((struct objfile *, struct section_offsets *, int));
static void
-free_debugsection PARAMS ((void));
+scan_xcoff_symtab PARAMS ((struct section_offsets *, struct objfile *));
-static int
-init_debugsection PARAMS ((bfd *));
+static char *
+xcoff_next_symbol_text PARAMS ((struct objfile *));
-static int
-init_stringtab PARAMS ((bfd *, file_ptr, struct objfile *));
+static void
+record_include_begin PARAMS ((struct coff_symbol *));
static void
-xcoff_symfile_init PARAMS ((struct objfile *));
+enter_line_range PARAMS ((struct subfile *, unsigned, unsigned,
+ CORE_ADDR, CORE_ADDR, unsigned *));
static void
-xcoff_new_init PARAMS ((struct objfile *));
+init_stringtab PARAMS ((bfd *, file_ptr, struct objfile *));
-#ifdef __STDC__
-struct section_offset;
-#endif
+static void
+xcoff_symfile_init PARAMS ((struct objfile *));
static void
-xcoff_symfile_read PARAMS ((struct objfile *, struct section_offset *, int));
+xcoff_new_init PARAMS ((struct objfile *));
static void
xcoff_symfile_finish PARAMS ((struct objfile *));
static struct section_offsets *
xcoff_symfile_offsets PARAMS ((struct objfile *, CORE_ADDR));
-static int
-init_lineno PARAMS ((bfd *, file_ptr, int));
-
static void
find_linenos PARAMS ((bfd *, sec_ptr, PTR));
+static char *
+coff_getfilename PARAMS ((union internal_auxent *, struct objfile *));
+
+static void
+read_symbol PARAMS ((struct internal_syment *, int));
+
static int
read_symbol_lineno PARAMS ((int));
process_xcoff_symbol PARAMS ((struct coff_symbol *, struct objfile *));
static void
-read_xcoff_symtab PARAMS ((struct objfile *, int));
+read_xcoff_symtab PARAMS ((struct partial_symtab *));
+#if 0
static void
add_stab_to_list PARAMS ((char *, struct pending_stabs **));
-
-static void
-sort_syms PARAMS ((void));
+#endif
static int
-compare_symbols PARAMS ((const void *, const void *));
+compare_lte PARAMS ((const void *, const void *));
-/* Call sort_syms to sort alphabetically
- the symbols of each block of each symtab. */
+static struct linetable *
+arrange_linetable PARAMS ((struct linetable *));
-static int
-compare_symbols (s1p, s2p)
- const PTR s1p;
- const PTR s2p;
-{
- /* Names that are less should come first. */
- register struct symbol **s1 = (struct symbol **) s1p;
- register struct symbol **s2 = (struct symbol **) s2p;
- register int namediff = STRCMP (SYMBOL_NAME (*s1), SYMBOL_NAME (*s2));
- if (namediff != 0)
- return namediff;
-
- /* For symbols of the same name, registers should come first. */
- return ((SYMBOL_CLASS (*s2) == LOC_REGISTER)
- - (SYMBOL_CLASS (*s1) == LOC_REGISTER));
-}
+static void
+record_include_end PARAMS ((struct coff_symbol *));
+static void
+process_linenos PARAMS ((CORE_ADDR, CORE_ADDR));
-/* Sort a vector of symbols by their value. */
+\f
+/* Translate from a COFF section number (target_index) to a SECT_OFF_*
+ code. */
+static int secnum_to_section PARAMS ((int, struct objfile *));
+static asection * secnum_to_bfd_section PARAMS ((int, struct objfile *));
+
+struct find_targ_sec_arg {
+ int targ_index;
+ int *resultp;
+ asection **bfd_sect;
+};
-static void
-sort_syms ()
-{
- register struct symtab *s;
- register struct objfile *objfile;
- register int i, nbl;
- register struct blockvector *bv;
- register struct block *b;
+static void find_targ_sec PARAMS ((bfd *, asection *, void *));
- for (objfile = object_files; objfile != NULL; objfile = objfile -> next)
+static void find_targ_sec (abfd, sect, obj)
+ bfd *abfd;
+ asection *sect;
+ PTR obj;
+{
+ struct find_targ_sec_arg *args = (struct find_targ_sec_arg *)obj;
+ if (sect->target_index == args->targ_index)
{
- for (s = objfile -> symtabs; s != NULL; s = s -> next)
- {
- bv = BLOCKVECTOR (s);
- nbl = BLOCKVECTOR_NBLOCKS (bv);
- for (i = 0; i < nbl; i++)
- {
- b = BLOCKVECTOR_BLOCK (bv, i);
- if (BLOCK_SHOULD_SORT (b))
- {
- qsort (&BLOCK_SYM (b, 0), BLOCK_NSYMS (b),
- sizeof (struct symbol *), compare_symbols);
- }
- }
- }
+ /* This is the section. Figure out what SECT_OFF_* code it is. */
+ if (bfd_get_section_flags (abfd, sect) & SEC_CODE)
+ *args->resultp = SECT_OFF_TEXT;
+ else if (bfd_get_section_flags (abfd, sect) & SEC_LOAD)
+ *args->resultp = SECT_OFF_DATA;
+ else
+ *args->resultp = SECT_OFF_BSS;
+ *args->bfd_sect = sect;
}
}
+/* Return the section number (SECT_OFF_*) that CS points to. */
+static int
+secnum_to_section (secnum, objfile)
+ int secnum;
+ struct objfile *objfile;
+{
+ int off = SECT_OFF_TEXT;
+ asection *sect = NULL;
+ struct find_targ_sec_arg args;
+ args.targ_index = secnum;
+ args.resultp = &off;
+ args.bfd_sect = §
+ bfd_map_over_sections (objfile->obfd, find_targ_sec, &args);
+ return off;
+}
+/* Return the BFD section that CS points to. */
+static asection *
+secnum_to_bfd_section (secnum, objfile)
+ int secnum;
+ struct objfile *objfile;
+{
+ int off = SECT_OFF_TEXT;
+ asection *sect = NULL;
+ struct find_targ_sec_arg args;
+ args.targ_index = secnum;
+ args.resultp = &off;
+ args.bfd_sect = §
+ bfd_map_over_sections (objfile->obfd, find_targ_sec, &args);
+ return sect;
+}
+\f
/* add a given stab string into given stab vector. */
+#if 0
+
static void
add_stab_to_list (stabname, stabvector)
char *stabname;
(*stabvector)->stab [(*stabvector)->count++] = stabname;
}
+#endif
-#if 0
-/* for all the stabs in a given stab vector, build appropriate types
- and fix their symbols in given symbol vector. */
-
-void
-patch_block_stabs (symbols, stabs)
-struct pending *symbols;
-struct pending_stabs *stabs;
-{
- int ii;
+\f
+/* Linenos are processed on a file-by-file basis.
+
+ Two reasons:
+
+ 1) xlc (IBM's native c compiler) postpones static function code
+ emission to the end of a compilation unit. This way it can
+ determine if those functions (statics) are needed or not, and
+ can do some garbage collection (I think). This makes line
+ numbers and corresponding addresses unordered, and we end up
+ with a line table like:
+
+
+ lineno addr
+ foo() 10 0x100
+ 20 0x200
+ 30 0x300
+
+ foo3() 70 0x400
+ 80 0x500
+ 90 0x600
+
+ static foo2()
+ 40 0x700
+ 50 0x800
+ 60 0x900
+
+ and that breaks gdb's binary search on line numbers, if the
+ above table is not sorted on line numbers. And that sort
+ should be on function based, since gcc can emit line numbers
+ like:
+
+ 10 0x100 - for the init/test part of a for stmt.
+ 20 0x200
+ 30 0x300
+ 10 0x400 - for the increment part of a for stmt.
- if (!stabs)
- return;
+ arrange_linetable() will do this sorting.
- /* for all the stab entries, find their corresponding symbols and
- patch their types! */
-
- for (ii=0; ii < stabs->count; ++ii) {
- char *name = stabs->stab[ii];
- char *pp = (char*) index (name, ':');
- struct symbol *sym = find_symbol_in_list (symbols, name, pp-name);
- if (!sym) {
- ;
- /* printf ("ERROR! stab symbol not found!\n"); */ /* FIXME */
- /* The above is a false alarm. There are cases the we can have
- a stab, without its symbol. xlc generates this for the extern
- definitions in inner blocks. */
- }
- else {
- pp += 2;
+ 2) aix symbol table might look like:
- if (*(pp-1) == 'F' || *(pp-1) == 'f')
- SYMBOL_TYPE (sym) = lookup_function_type (read_type (&pp, objfile));
- else
- SYMBOL_TYPE (sym) = read_type (&pp, objfile);
- }
- }
-}
-#endif
+ c_file // beginning of a new file
+ .bi // beginning of include file
+ .ei // end of include file
+ .bi
+ .ei
+ basically, .bi/.ei pairs do not necessarily encapsulate
+ their scope. They need to be recorded, and processed later
+ on when we come the end of the compilation unit.
+ Include table (inclTable) and process_linenos() handle
+ that. */
/* compare line table entry addresses. */
- static int
-compare_lte (lte1, lte2)
- struct linetable_entry *lte1, *lte2;
+static int
+compare_lte (lte1p, lte2p)
+ const void *lte1p;
+ const void *lte2p;
{
+ struct linetable_entry *lte1 = (struct linetable_entry *) lte1p;
+ struct linetable_entry *lte2 = (struct linetable_entry *) lte2p;
return lte1->pc - lte2->pc;
}
-/* Give a line table with function entries are marked, arrange its functions
- in assending order and strip off function entry markers and return it in
+/* Given a line table with function entries are marked, arrange its functions
+ in ascending order and strip off function entry markers and return it in
a newly created table. If the old one is good enough, return the old one. */
+/* FIXME: I think all this stuff can be replaced by just passing
+ sort_linevec = 1 to end_symtab. */
static struct linetable *
arrange_linetable (oldLineTb)
- struct linetable *oldLineTb; /* old linetable */
+ struct linetable *oldLineTb; /* old linetable */
{
int ii, jj,
newline, /* new line count */
return newLineTb;
}
-
-
-/* We try to detect the beginning of a compilation unit. That info will
- be used as an entry in line number recording routines (enter_line_range) */
-
-static unsigned first_fun_line_offset;
-static unsigned first_fun_bf;
-
-#define mark_first_line(OFFSET, SYMNUM) \
- if (!first_fun_line_offset) { \
- first_fun_line_offset = OFFSET; \
- first_fun_bf = SYMNUM; \
- }
-
-
/* include file support: C_BINCL/C_EINCL pairs will be kept in the
following `IncludeChain'. At the end of each symtab (end_symtab),
we will determine if we should create additional symtab's to
static int inclLength; /* table length */
static int inclDepth; /* nested include depth */
+static void allocate_include_entry PARAMS ((void));
static void
record_include_begin (cs)
struct coff_symbol *cs;
{
- /* In xcoff, we assume include files cannot be nested (not in .c files
- of course, but in corresponding .s files.) */
-
if (inclDepth)
- fatal ("xcoff internal: pending include file exists.");
+ {
+ /* In xcoff, we assume include files cannot be nested (not in .c files
+ of course, but in corresponding .s files.). */
+ /* This can happen with old versions of GCC.
+ GCC 2.3.3-930426 does not exhibit this on a test case which
+ a user said produced the message for him. */
+ static struct complaint msg = {"Nested C_BINCL symbols", 0, 0};
+ complain (&msg);
+ }
++inclDepth;
- /* allocate an include file, or make room for the new entry */
- if (inclLength == 0) {
- inclTable = (InclTable*)
- xmalloc (sizeof (InclTable) * INITIAL_INCLUDE_TABLE_LENGTH);
- bzero (inclTable, sizeof (InclTable) * INITIAL_INCLUDE_TABLE_LENGTH);
- inclLength = INITIAL_INCLUDE_TABLE_LENGTH;
- inclIndx = 0;
- }
- else if (inclIndx >= inclLength) {
- inclLength += INITIAL_INCLUDE_TABLE_LENGTH;
- inclTable = (InclTable*)
- xrealloc (inclTable, sizeof (InclTable) * inclLength);
- bzero (inclTable+inclLength-INITIAL_INCLUDE_TABLE_LENGTH,
- sizeof (InclTable)*INITIAL_INCLUDE_TABLE_LENGTH);
- }
+ allocate_include_entry ();
inclTable [inclIndx].name = cs->c_name;
inclTable [inclIndx].begin = cs->c_value;
}
-
static void
record_include_end (cs)
struct coff_symbol *cs;
InclTable *pTbl;
if (inclDepth == 0)
- fatal ("xcoff internal: Mismatch C_BINCL/C_EINCL pair found.");
+ {
+ static struct complaint msg = {"Mismatched C_BINCL/C_EINCL pair", 0, 0};
+ complain (&msg);
+ }
+
+ allocate_include_entry ();
pTbl = &inclTable [inclIndx];
pTbl->end = cs->c_value;
++inclIndx;
}
+static void
+allocate_include_entry ()
+{
+ if (inclTable == NULL)
+ {
+ inclTable = (InclTable *)
+ xmalloc (sizeof (InclTable) * INITIAL_INCLUDE_TABLE_LENGTH);
+ memset (inclTable,
+ '\0', sizeof (InclTable) * INITIAL_INCLUDE_TABLE_LENGTH);
+ inclLength = INITIAL_INCLUDE_TABLE_LENGTH;
+ inclIndx = 0;
+ }
+ else if (inclIndx >= inclLength)
+ {
+ inclLength += INITIAL_INCLUDE_TABLE_LENGTH;
+ inclTable = (InclTable *)
+ xrealloc (inclTable, sizeof (InclTable) * inclLength);
+ memset (inclTable + inclLength - INITIAL_INCLUDE_TABLE_LENGTH,
+ '\0', sizeof (InclTable)*INITIAL_INCLUDE_TABLE_LENGTH);
+ }
+}
+
+/* Global variable to pass the psymtab down to all the routines involved
+ in psymtab to symtab processing. */
+static struct partial_symtab *this_symtab_psymtab;
-/* given the start and end addresses of a compilation unit (or a csect, at times)
- process its lines and create appropriate line vectors. */
+/* given the start and end addresses of a compilation unit (or a csect,
+ at times) process its lines and create appropriate line vectors. */
static void
process_linenos (start, end)
- CORE_ADDR start, end;
+ CORE_ADDR start, end;
{
- char *pp;
int offset, ii;
+ file_ptr max_offset =
+ ((struct coff_symfile_info *)this_symtab_psymtab->objfile->sym_private)
+ ->max_lineno_offset;
- struct subfile main_subfile; /* subfile structure for the main
- compilation unit. */
+ /* subfile structure for the main compilation unit. */
+ struct subfile main_subfile;
- /* in the main source file, any time we see a function entry, we reset
- this variable to function's absolute starting line number. All the
- following line numbers in the function are relative to this, and
- we record absolute line numbers in record_line(). */
+ /* In the main source file, any time we see a function entry, we
+ reset this variable to function's absolute starting line number.
+ All the following line numbers in the function are relative to
+ this, and we record absolute line numbers in record_line(). */
- int main_source_baseline = 0;
+ unsigned int main_source_baseline = 0;
-
unsigned *firstLine;
- CORE_ADDR addr;
- if (!(offset = first_fun_line_offset))
+ offset =
+ ((struct symloc *)this_symtab_psymtab->read_symtab_private)->lineno_off;
+ if (offset == 0)
goto return_after_cleanup;
- bzero (&main_subfile, sizeof (main_subfile));
- first_fun_line_offset = 0;
+ memset (&main_subfile, '\0', sizeof (main_subfile));
if (inclIndx == 0)
/* All source lines were in the main source file. None in include files. */
enter_line_range (&main_subfile, offset, 0, start, end,
&main_source_baseline);
- /* else, there was source with line numbers in include files */
- else {
-
- main_source_baseline = 0;
- for (ii=0; ii < inclIndx; ++ii) {
-
- struct subfile *tmpSubfile;
+ else
+ {
+ /* There was source with line numbers in include files. */
+ main_source_baseline = 0;
+ for (ii=0; ii < inclIndx; ++ii)
+ {
+ struct subfile *tmpSubfile;
- /* if there is main file source before include file, enter it. */
- if (offset < inclTable[ii].begin) {
- enter_line_range
- (&main_subfile, offset, inclTable[ii].begin - LINESZ, start, 0,
- &main_source_baseline);
- }
+ /* If there is main file source before include file, enter it. */
+ if (offset < inclTable[ii].begin)
+ {
+ enter_line_range
+ (&main_subfile, offset, inclTable[ii].begin - LINESZ,
+ start, 0, &main_source_baseline);
+ }
- /* Have a new subfile for the include file */
+ /* Have a new subfile for the include file. */
- tmpSubfile = inclTable[ii].subfile = (struct subfile*)
- xmalloc (sizeof (struct subfile));
+ tmpSubfile = inclTable[ii].subfile =
+ (struct subfile *) xmalloc (sizeof (struct subfile));
- bzero (tmpSubfile, sizeof (struct subfile));
- firstLine = &(inclTable[ii].funStartLine);
+ memset (tmpSubfile, '\0', sizeof (struct subfile));
+ firstLine = &(inclTable[ii].funStartLine);
- /* enter include file's lines now. */
- enter_line_range (tmpSubfile, inclTable[ii].begin,
- inclTable[ii].end, start, 0, firstLine);
+ /* Enter include file's lines now. */
+ enter_line_range (tmpSubfile, inclTable[ii].begin,
+ inclTable[ii].end, start, 0, firstLine);
- offset = inclTable[ii].end + LINESZ;
- }
+ if (offset <= inclTable[ii].end)
+ offset = inclTable[ii].end + LINESZ;
+ }
- /* all the include files' line have been processed at this point. Now,
- enter remaining lines of the main file, if any left. */
- if (offset < (linetab_offset + linetab_size + 1 - LINESZ)) {
- enter_line_range (&main_subfile, offset, 0, start, end,
- &main_source_baseline);
+ /* All the include files' line have been processed at this point. Now,
+ enter remaining lines of the main file, if any left. */
+ if (offset < max_offset + 1 - LINESZ)
+ {
+ enter_line_range (&main_subfile, offset, 0, start, end,
+ &main_source_baseline);
+ }
}
- }
- /* Process main file's line numbers. */
- if (main_subfile.line_vector) {
- struct linetable *lineTb, *lv;
+ /* Process main file's line numbers. */
+ if (main_subfile.line_vector)
+ {
+ struct linetable *lineTb, *lv;
- lv = main_subfile.line_vector;
+ lv = main_subfile.line_vector;
- /* Line numbers are not necessarily ordered. xlc compilation will
- put static function to the end. */
+ /* Line numbers are not necessarily ordered. xlc compilation will
+ put static function to the end. */
- lineTb = arrange_linetable (lv);
- if (lv == lineTb) {
- current_subfile->line_vector = (struct linetable *)
- xrealloc (lv, (sizeof (struct linetable)
- + lv->nitems * sizeof (struct linetable_entry)));
+ lineTb = arrange_linetable (lv);
+ if (lv == lineTb)
+ {
+ current_subfile->line_vector = (struct linetable *)
+ xrealloc (lv, (sizeof (struct linetable)
+ + lv->nitems * sizeof (struct linetable_entry)));
+ }
+ else
+ {
+ free (lv);
+ current_subfile->line_vector = lineTb;
+ }
+ current_subfile->line_vector_length =
+ current_subfile->line_vector->nitems;
}
- else {
- free (lv);
- current_subfile->line_vector = lineTb;
- }
-
- current_subfile->line_vector_length =
- current_subfile->line_vector->nitems;
- }
- /* Now, process included files' line numbers. */
+ /* Now, process included files' line numbers. */
- for (ii=0; ii < inclIndx; ++ii) {
+ for (ii=0; ii < inclIndx; ++ii)
+ {
+ if ((inclTable[ii].subfile)->line_vector) /* Useless if!!! FIXMEmgo */
+ {
+ struct linetable *lineTb, *lv;
- if ( (inclTable[ii].subfile)->line_vector) { /* Useless if!!! FIXMEmgo */
- struct linetable *lineTb, *lv;
+ lv = (inclTable[ii].subfile)->line_vector;
- lv = (inclTable[ii].subfile)->line_vector;
+ /* Line numbers are not necessarily ordered. xlc compilation will
+ put static function to the end. */
- /* Line numbers are not necessarily ordered. xlc compilation will
- put static function to the end. */
+ lineTb = arrange_linetable (lv);
- lineTb = arrange_linetable (lv);
+ push_subfile ();
- push_subfile ();
+ /* For the same include file, we might want to have more than one
+ subfile. This happens if we have something like:
- /* For the same include file, we might want to have more than one subfile.
- This happens if we have something like:
-
......
#include "foo.h"
......
#include "foo.h"
......
- while foo.h including code in it. (stupid but possible)
- Since start_subfile() looks at the name and uses an existing one if finds,
- we need to provide a fake name and fool it. */
+ while foo.h including code in it. (stupid but possible)
+ Since start_subfile() looks at the name and uses an
+ existing one if finds, we need to provide a fake name and
+ fool it. */
-/* start_subfile (inclTable[ii].name, (char*)0); */
- start_subfile (" ?", (char*)0);
- free (current_subfile->name);
- current_subfile->name = strdup (inclTable[ii].name);
+#if 0
+ start_subfile (inclTable[ii].name, (char*)0);
+#else
+ {
+ /* Pick a fake name that will produce the same results as this
+ one when passed to deduce_language_from_filename. Kludge on
+ top of kludge. */
+ char *fakename = strrchr (inclTable[ii].name, '.');
+ if (fakename == NULL)
+ fakename = " ?";
+ start_subfile (fakename, (char*)0);
+ free (current_subfile->name);
+ }
+ current_subfile->name = strdup (inclTable[ii].name);
+#endif
- if (lv == lineTb) {
- current_subfile->line_vector = (struct linetable *)
- xrealloc (lv, (sizeof (struct linetable)
+ if (lv == lineTb)
+ {
+ current_subfile->line_vector =
+ (struct linetable *) xrealloc
+ (lv, (sizeof (struct linetable)
+ lv->nitems * sizeof (struct linetable_entry)));
- }
- else {
- free (lv);
- current_subfile->line_vector = lineTb;
- }
+ }
+ else
+ {
+ free (lv);
+ current_subfile->line_vector = lineTb;
+ }
- current_subfile->line_vector_length =
- current_subfile->line_vector->nitems;
- start_subfile (pop_subfile (), (char*)0);
- }
+ current_subfile->line_vector_length =
+ current_subfile->line_vector->nitems;
+ start_subfile (pop_subfile (), (char*)0);
+ }
}
-return_after_cleanup:
+ return_after_cleanup:
- /* We don't want to keep alloc/free'ing the global include file table. */
+ /* We don't want to keep alloc/free'ing the global include file table. */
inclIndx = 0;
- /* start with a fresh subfile structure for the next file. */
- bzero (&main_subfile, sizeof (struct subfile));
+ /* Start with a fresh subfile structure for the next file. */
+ memset (&main_subfile, '\0', sizeof (struct subfile));
}
void
attention to. */
static void
-enter_line_range (subfile, beginoffset, endoffset, startaddr, endaddr, firstLine)
- struct subfile *subfile;
- unsigned beginoffset, endoffset; /* offsets to line table */
- CORE_ADDR startaddr, endaddr;
- unsigned *firstLine;
+enter_line_range (subfile, beginoffset, endoffset, startaddr, endaddr,
+ firstLine)
+ struct subfile *subfile;
+ unsigned beginoffset, endoffset; /* offsets to line table */
+ CORE_ADDR startaddr, endaddr;
+ unsigned *firstLine;
{
- char *pp, *limit;
- CORE_ADDR addr;
+ unsigned int curoffset;
+ CORE_ADDR addr;
+ struct external_lineno ext_lnno;
+ struct internal_lineno int_lnno;
+ unsigned int limit_offset;
+ bfd *abfd;
-/* Do Byte swapping, if needed. FIXME! */
-#define P_LINENO(PP) (*(unsigned short*)((struct external_lineno*)(PP))->l_lnno)
-#define P_LINEADDR(PP) (*(long*)((struct external_lineno*)(PP))->l_addr.l_paddr)
-#define P_LINESYM(PP) (*(long*)((struct external_lineno*)(PP))->l_addr.l_symndx)
+ if (endoffset == 0 && startaddr == 0 && endaddr == 0)
+ return;
+ curoffset = beginoffset;
+ limit_offset =
+ ((struct coff_symfile_info *)this_symtab_psymtab->objfile->sym_private)
+ ->max_lineno_offset;
- pp = &linetab [beginoffset - linetab_offset];
- if (endoffset != 0 && endoffset - linetab_offset >= linetab_size)
+ if (endoffset != 0)
{
- static struct complaint msg =
- {"Bad line table offset in C_EINCL directive", 0, 0};
- complain (&msg);
- return;
+ if (endoffset >= limit_offset)
+ {
+ static struct complaint msg =
+ {"Bad line table offset in C_EINCL directive", 0, 0};
+ complain (&msg);
+ return;
+ }
+ limit_offset = endoffset;
}
- limit = endoffset ? &linetab [endoffset - linetab_offset]
- : &linetab [linetab_size -1];
+ else
+ limit_offset -= 1;
+ abfd = this_symtab_psymtab->objfile->obfd;
- while (pp <= limit) {
+ while (curoffset <= limit_offset)
+ {
+ bfd_seek (abfd, curoffset, SEEK_SET);
+ bfd_read (&ext_lnno, sizeof (struct external_lineno), 1, abfd);
+ bfd_coff_swap_lineno_in (abfd, &ext_lnno, &int_lnno);
- /* find the address this line represents */
- addr = P_LINENO(pp) ?
- P_LINEADDR(pp) : read_symbol_nvalue (P_LINESYM(pp));
+ /* Find the address this line represents. */
+ addr = (int_lnno.l_lnno
+ ? int_lnno.l_addr.l_paddr
+ : read_symbol_nvalue (int_lnno.l_addr.l_symndx));
+ addr += ANOFFSET (this_symtab_psymtab->objfile->section_offsets,
+ SECT_OFF_TEXT);
- if (addr < startaddr || (endaddr && addr > endaddr))
- return;
+ if (addr < startaddr || (endaddr && addr >= endaddr))
+ return;
- if (P_LINENO(pp) == 0) {
- *firstLine = read_symbol_lineno (P_LINESYM(pp));
- record_line (subfile, 0, addr);
- --(*firstLine);
+ if (int_lnno.l_lnno == 0)
+ {
+ *firstLine = read_symbol_lineno (int_lnno.l_addr.l_symndx);
+ record_line (subfile, 0, addr);
+ --(*firstLine);
+ }
+ else
+ record_line (subfile, *firstLine + int_lnno.l_lnno, addr);
+ curoffset += LINESZ;
}
- else
- record_line (subfile, *firstLine + P_LINENO(pp), addr);
-
- pp += LINESZ;
- }
}
-typedef struct {
- int fsize; /* file size */
- int fixedparms; /* number of fixed parms */
- int floatparms; /* number of float parms */
- unsigned int parminfo; /* parameter info.
- See /usr/include/sys/debug.h
- tbtable_ext.parminfo */
- int framesize; /* function frame size */
-} TracebackInfo;
-
-
-/* Given a function symbol, return its traceback information. */
- TracebackInfo *
-retrieve_tracebackinfo (abfd, textsec, cs)
- bfd *abfd;
- sec_ptr textsec;
- struct coff_symbol *cs;
-{
-#define TBTABLE_BUFSIZ 2000
+/* Save the vital information for use when closing off the current file.
+ NAME is the file name the symbols came from, START_ADDR is the first
+ text address for the file, and SIZE is the number of bytes of text. */
- static TracebackInfo tbInfo;
- struct tbtable *ptb;
+#define complete_symtab(name, start_addr) { \
+ last_source_file = savestring (name, strlen (name)); \
+ last_source_start_addr = start_addr; \
+}
- static char buffer [TBTABLE_BUFSIZ];
- int *pinsn;
- int bytesread=0; /* total # of bytes read so far */
- int bufferbytes; /* number of bytes in the buffer */
+/* Refill the symbol table input buffer
+ and set the variables that control fetching entries from it.
+ Reports an error if no data available.
+ This function can read past the end of the symbol table
+ (into the string table) but this does no harm. */
- int functionstart = cs->c_value - textsec->vma;
+/* Reading symbol table has to be fast! Keep the followings as macros, rather
+ than functions. */
- bzero (&tbInfo, sizeof (tbInfo));
+#define RECORD_MINIMAL_SYMBOL(NAME, ADDR, TYPE, SECTION, OBJFILE) \
+{ \
+ char *namestr; \
+ namestr = (NAME); \
+ if (namestr[0] == '.') ++namestr; \
+ prim_record_minimal_symbol_and_info (namestr, (ADDR), (TYPE), \
+ (char *)NULL, (SECTION), (asection *)NULL, (OBJFILE)); \
+ misc_func_recorded = 1; \
+}
- /* keep reading blocks of data from the text section, until finding a zero
- word and a traceback table. */
- /* Note: The logical thing way to write this code would be to assign
- to bufferbytes within the while condition. But that triggers a
- compiler (xlc in AIX 3.2) bug, so simplify it... */
- bufferbytes =
- (TBTABLE_BUFSIZ < (textsec->_raw_size - functionstart - bytesread) ?
- TBTABLE_BUFSIZ : (textsec->_raw_size - functionstart - bytesread));
- while (bufferbytes
- && (bfd_get_section_contents
- (abfd, textsec, buffer,
- (file_ptr)(functionstart + bytesread), bufferbytes)))
- {
- bytesread += bufferbytes;
- pinsn = (int*) buffer;
+/* xcoff has static blocks marked in `.bs', `.es' pairs. They cannot be
+ nested. At any given time, a symbol can only be in one static block.
+ This is the base address of current static block, zero if non exists. */
+
+static int static_block_base = 0;
- /* if this is the first time we filled the buffer, retrieve function
- framesize info. */
+/* Section number for the current static block. */
- if (bytesread == bufferbytes) {
+static int static_block_section = -1;
- /* skip over unrelated instructions */
+/* true if space for symbol name has been allocated. */
- if (*pinsn == 0x7c0802a6) /* mflr r0 */
- ++pinsn;
- if ((*pinsn & 0xfc00003e) == 0x7c000026) /* mfcr Rx */
- ++pinsn;
- if ((*pinsn & 0xfc000000) == 0x48000000) /* bl foo, save fprs */
- ++pinsn;
- if ((*pinsn & 0xfc1f0000) == 0xbc010000) /* stm Rx, NUM(r1) */
- ++pinsn;
+static int symname_alloced = 0;
- do {
- int tmp = (*pinsn >> 16) & 0xffff;
+/* Next symbol to read. Pointer into raw seething symbol table. */
- if (tmp == 0x9421) { /* stu r1, NUM(r1) */
- tbInfo.framesize = 0x10000 - (*pinsn & 0xffff);
- break;
- }
- else if ((*pinsn == 0x93e1fffc) || /* st r31,-4(r1) */
- (tmp == 0x9001)) /* st r0, NUM(r1) */
- ;
- /* else, could not find a frame size. */
- else
- return NULL;
+static char *raw_symbol;
- } while (++pinsn && *pinsn);
+/* This is the function which stabsread.c calls to get symbol
+ continuations. */
- if (!tbInfo.framesize)
- return NULL;
+static char *
+xcoff_next_symbol_text (objfile)
+ struct objfile *objfile;
+{
+ struct internal_syment symbol;
+ static struct complaint msg =
+ {"Unexpected symbol continuation", 0, 0};
+ char *retval;
+ /* FIXME: is this the same as the passed arg? */
+ objfile = this_symtab_psymtab->objfile;
+
+ bfd_coff_swap_sym_in (objfile->obfd, raw_symbol, &symbol);
+ if (symbol.n_zeroes)
+ {
+ complain (&msg);
+ /* Return something which points to '\0' and hope the symbol reading
+ code does something reasonable. */
+ retval = "";
+ }
+ else if (symbol.n_sclass & 0x80)
+ {
+ retval =
+ ((struct coff_symfile_info *)objfile->sym_private)->debugsec
+ + symbol.n_offset;
+ raw_symbol +=
+ coff_data (objfile->obfd)->local_symesz;
+ ++symnum;
}
+ else
+ {
+ complain (&msg);
- /* look for a zero word. */
+ /* Return something which points to '\0' and hope the symbol reading
+ code does something reasonable. */
+ retval = "";
+ }
+ return retval;
+}
- while (*pinsn && (pinsn < (int*)(buffer + bufferbytes - sizeof(int))))
- ++pinsn;
+/* Read symbols for a given partial symbol table. */
- if (pinsn >= (int*)(buffer + bufferbytes))
- continue;
+static void
+read_xcoff_symtab (pst)
+ struct partial_symtab *pst;
+{
+ struct objfile *objfile = pst->objfile;
+ bfd *abfd = objfile->obfd;
+ char *raw_auxptr; /* Pointer to first raw aux entry for sym */
+ char *strtbl = ((struct coff_symfile_info *)objfile->sym_private)->strtbl;
+ char *debugsec =
+ ((struct coff_symfile_info *)objfile->sym_private)->debugsec;
- if (*pinsn == 0) {
+ struct internal_syment symbol[1];
+ union internal_auxent main_aux;
+ struct coff_symbol cs[1];
+ CORE_ADDR file_start_addr = 0;
+ CORE_ADDR file_end_addr = 0;
- /* function size is the amount of bytes we have skipped so far. */
- tbInfo.fsize = bytesread - (buffer + bufferbytes - (char*)pinsn);
+ int next_file_symnum = -1;
+ unsigned int max_symnum;
+ int just_started = 1;
+ int depth = 0;
+ int fcn_start_addr = 0;
- ++pinsn;
+ struct coff_symbol fcn_stab_saved;
- /* if we don't have the whole traceback table in the buffer, re-read
- the whole thing. */
+ /* fcn_cs_saved is global because process_xcoff_symbol needs it. */
+ union internal_auxent fcn_aux_saved;
+ struct context_stack *new;
- /* This is how much to read to get the traceback table.
- 8 bytes of the traceback table are always present, plus we
- look at parminfo. */
-#define MIN_TBTABSIZ 12
-
- if ((char*)pinsn > (buffer + bufferbytes - MIN_TBTABSIZ)) {
+ char *filestring = " _start_ "; /* Name of the current file. */
- /* In case if we are *very* close to the end of the text section
- and cannot read properly from that point on, abort by returning
- NULL.
+ char *last_csect_name; /* last seen csect's name and value */
+ CORE_ADDR last_csect_val;
+ int last_csect_sec;
- This could happen if the traceback table is only 8 bytes,
- but we try to read 12 bytes of it.
- Handle this case more graciously -- FIXME */
+ this_symtab_psymtab = pst;
- if (!bfd_get_section_contents (
- abfd, textsec, buffer,
- (file_ptr)(functionstart +
- bytesread - (buffer + bufferbytes - (char*)pinsn)),MIN_TBTABSIZ))
- { printf ("Abnormal return!..\n"); return NULL; }
-
- ptb = (struct tbtable *)buffer;
- }
- else
- ptb = (struct tbtable *)pinsn;
-
- tbInfo.fixedparms = ptb->tb.fixedparms;
- tbInfo.floatparms = ptb->tb.floatparms;
- tbInfo.parminfo = ptb->tb_ext.parminfo;
- return &tbInfo;
- }
- bufferbytes =
- (TBTABLE_BUFSIZ < (textsec->_raw_size - functionstart - bytesread) ?
- TBTABLE_BUFSIZ : (textsec->_raw_size - functionstart - bytesread));
- }
- return NULL;
-}
-
-#if 0
-/* Given a function symbol, return a pointer to its traceback table. */
-
- struct tbtable *
-retrieve_traceback (abfd, textsec, cs, size)
- bfd *abfd;
- sec_ptr textsec;
- struct coff_symbol *cs;
- int *size; /* return function size */
-{
-#define TBTABLE_BUFSIZ 2000
-#define MIN_TBTABSIZ 50 /* minimum buffer size to hold a
- traceback table. */
-
- static char buffer [TBTABLE_BUFSIZ];
-
- int *pinsn;
- int bytesread=0; /* total # of bytes read so far */
- int bufferbytes; /* number of bytes in the buffer */
-
- int functionstart = cs->c_value - textsec->filepos + textsec->vma;
- *size = 0;
-
- /* keep reading blocks of data from the text section, until finding a zero
- word and a traceback table. */
-
- while (bfd_get_section_contents (abfd, textsec, buffer,
- (file_ptr)(functionstart + bytesread),
- bufferbytes = (
- (TBTABLE_BUFSIZ < (textsec->size - functionstart - bytesread)) ?
- TBTABLE_BUFSIZ : (textsec->size - functionstart - bytesread))))
- {
- bytesread += bufferbytes;
- pinsn = (int*) buffer;
-
- /* look for a zero word. */
-
- while (*pinsn && (pinsn < (int*)(buffer + bufferbytes - sizeof(int))))
- ++pinsn;
-
- if (pinsn >= (int*)(buffer + bufferbytes))
- continue;
-
- if (*pinsn == 0) {
-
- /* function size is the amount of bytes we have skipped so far. */
- *size = bytesread - (buffer + bufferbytes - pinsn);
-
- ++pinsn;
-
- /* if we don't have the whole traceback table in the buffer, re-read
- the whole thing. */
-
- if ((char*)pinsn > (buffer + bufferbytes - MIN_TBTABSIZ)) {
-
- /* In case if we are *very* close to the end of the text section
- and cannot read properly from that point on, abort for now.
- Handle this case more graciously -- FIXME */
-
- if (!bfd_get_section_contents (
- abfd, textsec, buffer,
- (file_ptr)(functionstart +
- bytesread - (buffer + bufferbytes - pinsn)),MIN_TBTABSIZ))
- /* abort (); */ { printf ("abort!!!\n"); return NULL; }
-
- return (struct tbtable *)buffer;
- }
- else
- return (struct tbtable *)pinsn;
- }
- }
- return NULL;
-}
-#endif /* 0 */
-
-
-
-
-/* Save the vital information for use when closing off the current file.
- NAME is the file name the symbols came from, START_ADDR is the first
- text address for the file, and SIZE is the number of bytes of text. */
-
-#define complete_symtab(name, start_addr) { \
- last_source_file = savestring (name, strlen (name)); \
- last_source_start_addr = start_addr; \
-}
-
-
-/* Refill the symbol table input buffer
- and set the variables that control fetching entries from it.
- Reports an error if no data available.
- This function can read past the end of the symbol table
- (into the string table) but this does no harm. */
-
-/* Reading symbol table has to be fast! Keep the followings as macros, rather
- than functions. */
-
-#define RECORD_MINIMAL_SYMBOL(NAME, ADDR, TYPE, ALLOCED) \
-{ \
- char *namestr; \
- if (ALLOCED) \
- namestr = (NAME) + 1; \
- else { \
- (NAME) = namestr = \
- obstack_copy0 (&objfile->symbol_obstack, (NAME) + 1, strlen ((NAME)+1)); \
- (ALLOCED) = 1; \
- } \
- prim_record_minimal_symbol (namestr, (ADDR), (TYPE)); \
- misc_func_recorded = 1; \
-}
-
-
-/* A parameter template, used by ADD_PARM_TO_PENDING. It is initialized
- in our initializer function at the bottom of the file, to avoid
- dependencies on the exact "struct symbol" format. */
-
-static struct symbol parmsym;
-
-/* Add a parameter to a given pending symbol list. */
-
-#define ADD_PARM_TO_PENDING(PARM, VALUE, PTYPE, PENDING_SYMBOLS) \
-{ \
- PARM = (struct symbol *) \
- obstack_alloc (&objfile->symbol_obstack, sizeof (struct symbol)); \
- *(PARM) = parmsym; \
- SYMBOL_TYPE (PARM) = PTYPE; \
- SYMBOL_VALUE (PARM) = VALUE; \
- add_symbol_to_list (PARM, &PENDING_SYMBOLS); \
-}
-
-
-/* xcoff has static blocks marked in `.bs', `.es' pairs. They cannot be
- nested. At any given time, a symbol can only be in one static block.
- This is the base address of current static block, zero if non exists. */
-
-static int static_block_base = 0;
-
-/* true if space for symbol name has been allocated. */
-
-static int symname_alloced = 0;
-
-/* read the whole symbol table of a given bfd. */
-
-static void
-read_xcoff_symtab (objfile, nsyms)
- struct objfile *objfile; /* Object file we're reading from */
- int nsyms; /* # of symbols */
-{
- bfd *abfd = objfile->obfd;
- char *raw_symbol; /* Pointer into raw seething symbol table */
- char *raw_auxptr; /* Pointer to first raw aux entry for sym */
- sec_ptr textsec; /* Pointer to text section */
- TracebackInfo *ptb; /* Pointer to traceback table */
-
- struct internal_syment symbol[1];
- union internal_auxent main_aux[1];
- struct coff_symbol cs[1];
- CORE_ADDR file_start_addr = 0;
- CORE_ADDR file_end_addr = 0;
-
- int next_file_symnum = -1;
- int just_started = 1;
- int depth = 0;
- int toc_offset = 0; /* toc offset value in data section. */
- int val;
- int fcn_last_line;
- int fcn_start_addr;
- long fcn_line_offset;
- size_t size;
-
- struct coff_symbol fcn_stab_saved;
-
- /* fcn_cs_saved is global because process_xcoff_symbol needs it. */
- union internal_auxent fcn_aux_saved;
- struct type *fcn_type_saved = NULL;
- struct context_stack *new;
-
- char *filestring = " _start_ "; /* Name of the current file. */
-
- char *last_csect_name; /* last seen csect's name and value */
- CORE_ADDR last_csect_val;
- int misc_func_recorded; /* true if any misc. function */
-
- current_objfile = objfile;
-
- /* Get the appropriate COFF "constants" related to the file we're handling. */
- N_TMASK = coff_data (abfd)->local_n_tmask;
- N_BTSHFT = coff_data (abfd)->local_n_btshft;
- local_symesz = coff_data (abfd)->local_symesz;
+ /* Get the appropriate COFF "constants" related to the file we're
+ handling. */
+ local_symesz = coff_data (abfd)->local_symesz;
last_source_file = NULL;
last_csect_name = 0;
last_csect_val = 0;
- misc_func_recorded = 0;
start_stabs ();
start_symtab (filestring, (char *)NULL, file_start_addr);
- symnum = 0;
+ record_debugformat ("XCOFF");
+ symnum = ((struct symloc *)pst->read_symtab_private)->first_symnum;
+ max_symnum =
+ symnum + ((struct symloc *)pst->read_symtab_private)->numsyms;
first_object_file_end = 0;
- /* Allocate space for the entire symbol table at once, and read it
- all in. The bfd is already positioned at the beginning of
- the symbol table. */
+ raw_symbol =
+ ((struct coff_symfile_info *) objfile->sym_private)->symtbl
+ + symnum * local_symesz;
- size = coff_data (abfd)->local_symesz * nsyms;
- symtbl = xmalloc (size);
- symtbl_num_syms = nsyms;
-
- val = bfd_read (symtbl, size, 1, abfd);
- if (val != size)
- perror_with_name ("reading symbol table");
+ while (symnum < max_symnum)
+ {
- raw_symbol = symtbl;
+ QUIT; /* make this command interruptable. */
- textsec = bfd_get_section_by_name (abfd, ".text");
- if (!textsec) {
- printf ("Unable to locate text section!\n");
- }
+ /* READ_ONE_SYMBOL (symbol, cs, symname_alloced); */
+ /* read one symbol into `cs' structure. After processing the
+ whole symbol table, only string table will be kept in memory,
+ symbol table and debug section of xcoff will be freed. Thus
+ we can mark symbols with names in string table as
+ `alloced'. */
+ {
+ int ii;
- while (symnum < nsyms) {
+ /* Swap and align the symbol into a reasonable C structure. */
+ bfd_coff_swap_sym_in (abfd, raw_symbol, symbol);
- QUIT; /* make this command interruptable. */
+ cs->c_symnum = symnum;
+ cs->c_naux = symbol->n_numaux;
+ if (symbol->n_zeroes)
+ {
+ symname_alloced = 0;
+ /* We must use the original, unswapped, name here so the name field
+ pointed to by cs->c_name will persist throughout xcoffread. If
+ we use the new field, it gets overwritten for each symbol. */
+ cs->c_name = ((struct external_syment *)raw_symbol)->e.e_name;
+ /* If it's exactly E_SYMNMLEN characters long it isn't
+ '\0'-terminated. */
+ if (cs->c_name[E_SYMNMLEN - 1] != '\0')
+ {
+ char *p;
+ p = obstack_alloc (&objfile->symbol_obstack, E_SYMNMLEN + 1);
+ strncpy (p, cs->c_name, E_SYMNMLEN);
+ p[E_SYMNMLEN] = '\0';
+ cs->c_name = p;
+ symname_alloced = 1;
+ }
+ }
+ else if (symbol->n_sclass & 0x80)
+ {
+ cs->c_name = debugsec + symbol->n_offset;
+ symname_alloced = 0;
+ }
+ else
+ {
+ /* in string table */
+ cs->c_name = strtbl + (int)symbol->n_offset;
+ symname_alloced = 1;
+ }
+ cs->c_value = symbol->n_value;
+ cs->c_sclass = symbol->n_sclass;
+ cs->c_secnum = symbol->n_scnum;
+ cs->c_type = (unsigned)symbol->n_type;
- /* READ_ONE_SYMBOL (symbol, cs, symname_alloced); */
- /* read one symbol into `cs' structure. After processing the whole symbol
- table, only string table will be kept in memory, symbol table and debug
- section of xcoff will be freed. Thus we can mark symbols with names
- in string table as `alloced'. */
- {
- int ii;
-
- /* Swap and align the symbol into a reasonable C structure. */
- bfd_coff_swap_sym_in (abfd, raw_symbol, symbol);
-
- cs->c_symnum = symnum;
- cs->c_nsyms = symbol->n_numaux;
- if (symbol->n_zeroes) {
- symname_alloced = 0;
- /* We must use the original, unswapped, name here so the name field
- pointed to by cs->c_name will persist throughout xcoffread. If
- we use the new field, it gets overwritten for each symbol. */
- cs->c_name = ((struct external_syment *)raw_symbol)->e.e_name;
- } else if (symbol->n_sclass & 0x80) {
- cs->c_name = debugsec + symbol->n_offset;
- symname_alloced = 0;
- } else { /* in string table */
- cs->c_name = strtbl + (int)symbol->n_offset;
- symname_alloced = 1;
- }
- cs->c_value = symbol->n_value;
- /* n_sclass is signed (FIXME), so we had better not mask off any
- high bits it contains, since the values we will be comparing
- it to are also signed (FIXME). Defined in <coff/internal.h>.
- At this point (3Jun92, gnu@cygnus.com) I think the fix is to
- make the fields and values unsigned chars, but changing the next
- line is a simple patch late in the release cycle, for now. */
- cs->c_sclass = symbol->n_sclass /* & 0xff */;
- cs->c_secnum = symbol->n_scnum;
- cs->c_type = (unsigned)symbol->n_type;
-
- raw_symbol += coff_data (abfd)->local_symesz;
- ++symnum;
+ raw_symbol += coff_data (abfd)->local_symesz;
+ ++symnum;
- raw_auxptr = raw_symbol; /* Save addr of first aux entry */
+ /* Save addr of first aux entry. */
+ raw_auxptr = raw_symbol;
- /* Skip all the auxents associated with this symbol. */
- for (ii = symbol->n_numaux; ii; --ii ) {
- raw_symbol += coff_data (abfd)->local_auxesz;
- ++symnum;
+ /* Skip all the auxents associated with this symbol. */
+ for (ii = symbol->n_numaux; ii; --ii)
+ {
+ raw_symbol += coff_data (abfd)->local_auxesz;
+ ++symnum;
+ }
}
- }
- /* if symbol name starts with ".$" or "$", ignore it. */
- if (cs->c_name[0] == '$' || (cs->c_name[1] == '$' && cs->c_name[0] == '.'))
- continue;
+ /* if symbol name starts with ".$" or "$", ignore it. */
+ if (cs->c_name[0] == '$'
+ || (cs->c_name[1] == '$' && cs->c_name[0] == '.'))
+ continue;
- if (cs->c_symnum == next_file_symnum && cs->c_sclass != C_FILE) {
- if (last_source_file)
+ if (cs->c_symnum == next_file_symnum && cs->c_sclass != C_FILE)
{
- end_symtab (cur_src_end_addr, 1, 0, objfile);
- end_stabs ();
- }
-
- start_stabs ();
- start_symtab ("_globals_", (char *)NULL, (CORE_ADDR)0);
- cur_src_end_addr = first_object_file_end;
- /* done with all files, everything from here on is globals */
- }
+ if (last_source_file)
+ {
+ pst->symtab =
+ end_symtab (cur_src_end_addr, objfile, SECT_OFF_TEXT);
+ end_stabs ();
+ }
- /* if explicitly specified as a function, treat is as one. */
- if (ISFCN(cs->c_type) && cs->c_sclass != C_TPDEF) {
- bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
- main_aux);
- goto function_entry_point;
- }
+ start_stabs ();
+ start_symtab ("_globals_", (char *)NULL, (CORE_ADDR)0);
+ record_debugformat ("XCOFF");
+ cur_src_end_addr = first_object_file_end;
+ /* done with all files, everything from here on is globals */
+ }
- if ((cs->c_sclass == C_EXT || cs->c_sclass == C_HIDEXT) && cs->c_nsyms == 1)
- {
- /* dealing with a symbol with a csect entry. */
+ /* if explicitly specified as a function, treat is as one. */
+ if (ISFCN(cs->c_type) && cs->c_sclass != C_TPDEF)
+ {
+ bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
+ 0, cs->c_naux, &main_aux);
+ goto function_entry_point;
+ }
-# define CSECT(PP) ((PP)->x_csect)
-# define CSECT_LEN(PP) (CSECT(PP).x_scnlen)
-# define CSECT_ALIGN(PP) (SMTYP_ALIGN(CSECT(PP).x_smtyp))
-# define CSECT_SMTYP(PP) (SMTYP_SMTYP(CSECT(PP).x_smtyp))
-# define CSECT_SCLAS(PP) (CSECT(PP).x_smclas)
+ if ((cs->c_sclass == C_EXT || cs->c_sclass == C_HIDEXT)
+ && cs->c_naux == 1)
+ {
+ /* Dealing with a symbol with a csect entry. */
- /* Convert the auxent to something we can access. */
- bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
- main_aux);
+#define CSECT(PP) ((PP)->x_csect)
+#define CSECT_LEN(PP) (CSECT(PP).x_scnlen.l)
+#define CSECT_ALIGN(PP) (SMTYP_ALIGN(CSECT(PP).x_smtyp))
+#define CSECT_SMTYP(PP) (SMTYP_SMTYP(CSECT(PP).x_smtyp))
+#define CSECT_SCLAS(PP) (CSECT(PP).x_smclas)
- switch (CSECT_SMTYP (main_aux)) {
+ /* Convert the auxent to something we can access. */
+ bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
+ 0, cs->c_naux, &main_aux);
- case XTY_ER :
- continue; /* ignore all external references. */
+ switch (CSECT_SMTYP (&main_aux))
+ {
- case XTY_SD : /* a section description. */
- {
- switch (CSECT_SCLAS (main_aux)) {
+ case XTY_ER:
+ /* Ignore all external references. */
+ continue;
- case XMC_PR : /* a `.text' csect. */
+ case XTY_SD:
+ /* A section description. */
{
-
- /* A program csect is seen.
-
- We have to allocate one symbol table for each program csect. Normally
- gdb prefers one symtab for each compilation unit (CU). In case of AIX, one
- CU might include more than one prog csect, and they don't have to be
- adjacent in terms of the space they occupy in memory. Thus, one single
- CU might get fragmented in the memory and gdb's file start and end address
- approach does not work! */
-
- if (last_csect_name) {
-
- /* if no misc. function recorded in the last seen csect, enter
- it as a function. This will take care of functions like
- strcmp() compiled by xlc. */
-
- if (!misc_func_recorded) {
- int alloced = 0;
- RECORD_MINIMAL_SYMBOL (last_csect_name, last_csect_val,
- mst_text, alloced);
+ switch (CSECT_SCLAS (&main_aux))
+ {
+
+ case XMC_PR:
+ {
+
+ /* A program csect is seen. We have to allocate one
+ symbol table for each program csect. Normally gdb
+ prefers one symtab for each source file. In case
+ of AIX, one source file might include more than one
+ [PR] csect, and they don't have to be adjacent in
+ terms of the space they occupy in memory. Thus, one
+ single source file might get fragmented in the
+ memory and gdb's file start and end address
+ approach does not work! GCC (and I think xlc) seem
+ to put all the code in the unnamed program csect. */
+
+ if (last_csect_name)
+ {
+ complete_symtab (filestring, file_start_addr);
+ cur_src_end_addr = file_end_addr;
+ end_symtab (file_end_addr, objfile, SECT_OFF_TEXT);
+ end_stabs ();
+ start_stabs ();
+ /* Give all csects for this source file the same
+ name. */
+ start_symtab (filestring, NULL, (CORE_ADDR)0);
+ record_debugformat ("XCOFF");
+ }
+
+ /* If this is the very first csect seen,
+ basically `__start'. */
+ if (just_started)
+ {
+ first_object_file_end
+ = cs->c_value + CSECT_LEN (&main_aux);
+ just_started = 0;
+ }
+
+ file_start_addr =
+ cs->c_value + ANOFFSET (objfile->section_offsets,
+ SECT_OFF_TEXT);
+ file_end_addr = file_start_addr + CSECT_LEN (&main_aux);
+
+ if (cs->c_name && cs->c_name[0] == '.')
+ {
+ last_csect_name = cs->c_name;
+ last_csect_val = cs->c_value;
+ last_csect_sec = secnum_to_section (cs->c_secnum, objfile);
+ }
+ }
+ continue;
+
+ /* All other symbols are put into the minimal symbol
+ table only. */
+
+ case XMC_RW:
+ continue;
+
+ case XMC_TC0:
+ continue;
+
+ case XMC_TC:
+ continue;
+
+ default:
+ /* Ignore the symbol. */
+ continue;
}
-
-
- complete_symtab (filestring, file_start_addr);
- cur_src_end_addr = file_end_addr;
- end_symtab (file_end_addr, 1, 0, objfile);
- end_stabs ();
- start_stabs ();
- start_symtab ((char *)NULL, (char *)NULL, (CORE_ADDR)0);
- }
-
- /* If this is the very first csect seen, basically `__start'. */
- if (just_started) {
- first_object_file_end = cs->c_value + CSECT_LEN (main_aux);
- just_started = 0;
- }
+ }
+ break;
- file_start_addr = cs->c_value;
- file_end_addr = cs->c_value + CSECT_LEN (main_aux);
+ case XTY_LD:
- if (cs->c_name && cs->c_name[0] == '.') {
- last_csect_name = cs->c_name;
- last_csect_val = cs->c_value;
+ switch (CSECT_SCLAS (&main_aux))
+ {
+ case XMC_PR:
+ /* a function entry point. */
+ function_entry_point:
+
+ fcn_start_addr = cs->c_value;
+
+ /* save the function header info, which will be used
+ when `.bf' is seen. */
+ fcn_cs_saved = *cs;
+ fcn_aux_saved = main_aux;
+ continue;
+
+ case XMC_GL:
+ /* shared library function trampoline code entry point. */
+ continue;
+
+ case XMC_DS:
+ /* The symbols often have the same names as debug symbols for
+ functions, and confuse lookup_symbol. */
+ continue;
+
+ default:
+ /* xlc puts each variable in a separate csect, so we get
+ an XTY_SD for each variable. But gcc puts several
+ variables in a csect, so that each variable only gets
+ an XTY_LD. This will typically be XMC_RW; I suspect
+ XMC_RO and XMC_BS might be possible too.
+ These variables are put in the minimal symbol table
+ only. */
+ continue;
}
- }
- misc_func_recorded = 0;
- continue;
-
- case XMC_RW :
break;
- /* If the section is not a data description, ignore it. Note that
- uninitialized data will show up as XTY_CM/XMC_RW pair. */
-
- case XMC_TC0:
- if (toc_offset)
- warning ("More than one xmc_tc0 symbol found.");
- toc_offset = cs->c_value;
+ case XTY_CM:
+ /* Common symbols are put into the minimal symbol table only. */
continue;
- case XMC_TC : /* ignore toc entries */
- default : /* any other XMC_XXX */
- continue;
+ default:
+ break;
}
- }
- break; /* switch CSECT_SCLAS() */
-
- case XTY_LD :
-
- /* a function entry point. */
- if (CSECT_SCLAS (main_aux) == XMC_PR) {
-
-function_entry_point:
- RECORD_MINIMAL_SYMBOL (cs->c_name, cs->c_value, mst_text,
- symname_alloced);
-
- fcn_line_offset = main_aux->x_sym.x_fcnary.x_fcn.x_lnnoptr;
- fcn_start_addr = cs->c_value;
-
- /* save the function header info, which will be used
- when `.bf' is seen. */
- fcn_cs_saved = *cs;
- fcn_aux_saved = *main_aux;
-
-
- ptb = NULL;
+ }
- /* If function has two auxent, then debugging information is
- already available for it. Process traceback table for
- functions with only one auxent. */
+ switch (cs->c_sclass)
+ {
- if (cs->c_nsyms == 1)
- ptb = retrieve_tracebackinfo (abfd, textsec, cs);
+ case C_FILE:
- else if (cs->c_nsyms != 2)
- abort ();
+ /* c_value field contains symnum of next .file entry in table
+ or symnum of first global after last .file. */
- /* If there is traceback info, create and add parameters for it. */
+ next_file_symnum = cs->c_value;
- if (ptb && (ptb->fixedparms || ptb->floatparms)) {
+ /* Complete symbol table for last object file containing
+ debugging information. */
- int parmcnt = ptb->fixedparms + ptb->floatparms;
- char *parmcode = (char*) &ptb->parminfo;
- int parmvalue = ptb->framesize + 0x18; /* sizeof(LINK AREA) == 0x18 */
- unsigned int ii, mask;
+ /* Whether or not there was a csect in the previous file, we
+ have to call `end_stabs' and `start_stabs' to reset
+ type_vector, line_vector, etc. structures. */
- for (ii=0, mask = 0x80000000; ii <parmcnt; ++ii) {
- struct symbol *parm;
+ complete_symtab (filestring, file_start_addr);
+ cur_src_end_addr = file_end_addr;
+ end_symtab (file_end_addr, objfile, SECT_OFF_TEXT);
+ end_stabs ();
- if (ptb->parminfo & mask) { /* float or double */
- mask = mask >> 1;
- if (ptb->parminfo & mask) { /* double parm */
- ADD_PARM_TO_PENDING
- (parm, parmvalue, builtin_type_double, local_symbols);
- parmvalue += sizeof (double);
- }
- else { /* float parm */
- ADD_PARM_TO_PENDING
- (parm, parmvalue, builtin_type_float, local_symbols);
- parmvalue += sizeof (float);
- }
- }
- else { /* fixed parm, use (int*) for hex rep. */
- ADD_PARM_TO_PENDING (parm, parmvalue,
- lookup_pointer_type (builtin_type_int),
- local_symbols);
- parmvalue += sizeof (int);
- }
- mask = mask >> 1;
- }
-
- /* Fake this as a function. Needed in process_xcoff_symbol() */
- cs->c_type = 32;
-
- finish_block(process_xcoff_symbol (cs, objfile), &local_symbols,
- pending_blocks, cs->c_value,
- cs->c_value + ptb->fsize, objfile);
+ /* XCOFF, according to the AIX 3.2 documentation, puts the filename
+ in cs->c_name. But xlc 1.3.0.2 has decided to do things the
+ standard COFF way and put it in the auxent. We use the auxent if
+ the symbol is ".file" and an auxent exists, otherwise use the symbol
+ itself. Simple enough. */
+ if (!strcmp (cs->c_name, ".file") && cs->c_naux > 0)
+ {
+ bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
+ 0, cs->c_naux, &main_aux);
+ filestring = coff_getfilename (&main_aux, objfile);
}
- continue;
- }
- /* shared library function trampoline code entry point. */
- else if (CSECT_SCLAS (main_aux) == XMC_GL) {
-
- /* record trampoline code entries as mst_unknown symbol. When we
- lookup mst symbols, we will choose mst_text over mst_unknown. */
-
-#if 1
- /* After the implementation of incremental loading of shared
- libraries, we don't want to access trampoline entries. This
- approach has a consequence of the necessity to bring the whole
- shared library at first, in order do anything with it (putting
- breakpoints, using malloc, etc). On the other side, this is
- consistient with gdb's behaviour on a SUN platform. */
-
- /* Trying to prefer *real* function entry over its trampoline,
- by assigning `mst_unknown' type to trampoline entries fails.
- Gdb treats those entries as chars. FIXME. */
-
- /* Recording this entry is necessary. Single stepping relies on
- this vector to get an idea about function address boundaries. */
-
- prim_record_minimal_symbol ("<trampoline>", cs->c_value,
- mst_unknown);
-#else
+ else
+ filestring = cs->c_name;
- /* record trampoline code entries as mst_unknown symbol. When we
- lookup mst symbols, we will choose mst_text over mst_unknown. */
+ start_stabs ();
+ start_symtab (filestring, (char *)NULL, (CORE_ADDR)0);
+ record_debugformat ("XCOFF");
+ last_csect_name = 0;
- RECORD_MINIMAL_SYMBOL (cs->c_name, cs->c_value, mst_unknown,
- symname_alloced);
-#endif
- continue;
- }
+ /* reset file start and end addresses. A compilation unit with no text
+ (only data) should have zero file boundaries. */
+ file_start_addr = file_end_addr = 0;
break;
- default : /* all other XTY_XXXs */
+ case C_FUN:
+ fcn_stab_saved = *cs;
break;
- } /* switch CSECT_SMTYP() */ }
- switch (cs->c_sclass) {
-
- case C_FILE:
-
- /* see if the last csect needs to be recorded. */
-
- if (last_csect_name && !misc_func_recorded) {
-
- /* if no misc. function recorded in the last seen csect, enter
- it as a function. This will take care of functions like
- strcmp() compiled by xlc. */
-
- int alloced = 0;
- RECORD_MINIMAL_SYMBOL (last_csect_name, last_csect_val,
- mst_text, alloced);
- }
+ case C_FCN:
+ if (STREQ (cs->c_name, ".bf"))
+ {
+ CORE_ADDR off = ANOFFSET (objfile->section_offsets,
+ SECT_OFF_TEXT);
+ bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
+ 0, cs->c_naux, &main_aux);
- /* c_value field contains symnum of next .file entry in table
- or symnum of first global after last .file. */
+ within_function = 1;
- next_file_symnum = cs->c_value;
+ new = push_context (0, fcn_start_addr + off);
- /* complete symbol table for last object file containing
- debugging information. */
+ new->name = define_symbol
+ (fcn_cs_saved.c_value + off,
+ fcn_stab_saved.c_name, 0, 0, objfile);
+ if (new->name != NULL)
+ SYMBOL_SECTION (new->name) = SECT_OFF_TEXT;
+ }
+ else if (STREQ (cs->c_name, ".ef"))
+ {
- /* Whether or not there was a csect in the previous file, we have to call
- `end_stabs' and `start_stabs' to reset type_vector,
- line_vector, etc. structures. */
+ bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
+ 0, cs->c_naux, &main_aux);
- complete_symtab (filestring, file_start_addr);
- cur_src_end_addr = file_end_addr;
- end_symtab (file_end_addr, 1, 0, objfile);
- end_stabs ();
- start_stabs ();
- start_symtab (cs->c_name, (char *)NULL, (CORE_ADDR)0);
- last_csect_name = 0;
+ /* The value of .ef is the address of epilogue code;
+ not useful for gdb. */
+ /* { main_aux.x_sym.x_misc.x_lnsz.x_lnno
+ contains number of lines to '}' */
- /* reset file start and end addresses. A compilation unit with no text
- (only data) should have zero file boundaries. */
- file_start_addr = file_end_addr = 0;
+ if (context_stack_depth <= 0)
+ { /* We attempted to pop an empty context stack */
+ complain (&ef_complaint, cs->c_symnum);
+ within_function = 0;
+ break;
+ }
+ new = pop_context ();
+ /* Stack must be empty now. */
+ if (context_stack_depth > 0 || new == NULL)
+ {
+ complain (&ef_complaint, cs->c_symnum);
+ within_function = 0;
+ break;
+ }
- filestring = cs->c_name;
- break;
+ finish_block (new->name, &local_symbols, new->old_blocks,
+ new->start_addr,
+ (fcn_cs_saved.c_value
+ + fcn_aux_saved.x_sym.x_misc.x_fsize
+ + ANOFFSET (objfile->section_offsets,
+ SECT_OFF_TEXT)),
+ objfile);
+ within_function = 0;
+ }
+ break;
+ case C_BSTAT:
+ /* Begin static block. */
+ {
+ struct internal_syment symbol;
- case C_FUN:
+ read_symbol (&symbol, cs->c_value);
+ static_block_base = symbol.n_value;
+ static_block_section =
+ secnum_to_section (symbol.n_scnum, objfile);
+ }
+ break;
-#ifdef NO_DEFINE_SYMBOL
- /* For a function stab, just save its type in `fcn_type_saved', and leave
- it for the `.bf' processing. */
- {
- char *pp = (char*) index (cs->c_name, ':');
+ case C_ESTAT:
+ /* End of static block. */
+ static_block_base = 0;
+ static_block_section = -1;
+ break;
- if (!pp || ( *(pp+1) != 'F' && *(pp+1) != 'f'))
- fatal ("Unrecognized stab");
- pp += 2;
+ case C_ARG:
+ case C_REGPARM:
+ case C_REG:
+ case C_TPDEF:
+ case C_STRTAG:
+ case C_UNTAG:
+ case C_ENTAG:
+ {
+ static struct complaint msg =
+ {"Unrecognized storage class %d.", 0, 0};
+ complain (&msg, cs->c_sclass);
+ }
+ break;
- if (fcn_type_saved)
- fatal ("Unprocessed function type");
+ case C_LABEL:
+ case C_NULL:
+ /* Ignore these. */
+ break;
- fcn_type_saved = lookup_function_type (read_type (&pp, objfile));
- }
-#else
- fcn_stab_saved = *cs;
-#endif
- break;
-
+ case C_HIDEXT:
+ case C_STAT:
+ break;
- case C_FCN:
- if (STREQ (cs->c_name, ".bf")) {
+ case C_BINCL:
+ /* beginning of include file */
+ /* In xlc output, C_BINCL/C_EINCL pair doesn't show up in sorted
+ order. Thus, when wee see them, we might not know enough info
+ to process them. Thus, we'll be saving them into a table
+ (inclTable) and postpone their processing. */
- bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
- main_aux);
+ record_include_begin (cs);
+ break;
- within_function = 1;
+ case C_EINCL:
+ /* End of include file. */
+ /* See the comment after case C_BINCL. */
+ record_include_end (cs);
+ break;
- /* Linenos are now processed on a file-by-file, not fn-by-fn, basis.
- Metin did it, I'm not sure why. FIXME. -- gnu@cygnus.com */
+ case C_BLOCK:
+ if (STREQ (cs->c_name, ".bb"))
+ {
+ depth++;
+ new = push_context (depth,
+ (cs->c_value
+ + ANOFFSET (objfile->section_offsets,
+ SECT_OFF_TEXT)));
+ }
+ else if (STREQ (cs->c_name, ".eb"))
+ {
+ if (context_stack_depth <= 0)
+ { /* We attempted to pop an empty context stack */
+ complain (&eb_complaint, cs->c_symnum);
+ break;
+ }
+ new = pop_context ();
+ if (depth-- != new->depth)
+ {
+ complain (&eb_complaint, cs->c_symnum);
+ break;
+ }
+ if (local_symbols && context_stack_depth > 0)
+ {
+ /* Make a block for the local symbols within. */
+ finish_block (new->name, &local_symbols, new->old_blocks,
+ new->start_addr,
+ (cs->c_value
+ + ANOFFSET (objfile->section_offsets,
+ SECT_OFF_TEXT)),
+ objfile);
+ }
+ local_symbols = new->locals;
+ }
+ break;
- /* Two reasons:
-
- 1) xlc (IBM's native c compiler) postpones static function code
- emission to the end of a compilation unit. This way it can
- determine if those functions (statics) are needed or not, and
- can do some garbage collection (I think). This makes line
- numbers and corresponding addresses unordered, and we end up
- with a line table like:
-
-
- lineno addr
- foo() 10 0x100
- 20 0x200
- 30 0x300
-
- foo3() 70 0x400
- 80 0x500
- 90 0x600
-
- static foo2()
- 40 0x700
- 50 0x800
- 60 0x900
-
- and that breaks gdb's binary search on line numbers, if the
- above table is not sorted on line numbers. And that sort
- should be on function based, since gcc can emit line numbers
- like:
-
- 10 0x100 - for the init/test part of a for stmt.
- 20 0x200
- 30 0x300
- 10 0x400 - for the increment part of a for stmt.
-
- arrange_linenos() will do this sorting.
-
-
- 2) aix symbol table might look like:
-
- c_file // beginning of a new file
- .bi // beginning of include file
- .ei // end of include file
- .bi
- .ei
-
- basically, .bi/.ei pairs do not necessarily encapsulate
- their scope. They need to be recorded, and processed later
- on when we come the end of the compilation unit.
- Include table (inclTable) and process_linenos() handle
- that.
- */
- mark_first_line (fcn_line_offset, cs->c_symnum);
-
- new = push_context (0, fcn_start_addr);
-
-#ifdef NO_DEFINE_SYMBOL
- new->name = process_xcoff_symbol (&fcn_cs_saved, objfile);
-
- /* Between a function symbol and `.bf', there always will be a function
- stab. We save function type when processing that stab. */
-
- if (fcn_type_saved == NULL) {
- printf ("Unknown function type: symbol 0x%x\n", cs->c_symnum);
- SYMBOL_TYPE (new->name) = lookup_function_type (builtin_type_int);
- }
- else {
- SYMBOL_TYPE (new->name) = fcn_type_saved;
- fcn_type_saved = NULL;
- }
-#else
- new->name = define_symbol
- (fcn_cs_saved.c_value, fcn_stab_saved.c_name, 0, 0, objfile);
-#endif
- }
- else if (STREQ (cs->c_name, ".ef")) {
-
- bfd_coff_swap_aux_in (abfd, raw_auxptr, cs->c_type, cs->c_sclass,
- main_aux);
-
- /* the value of .ef is the address of epilogue code;
- not useful for gdb */
- /* { main_aux.x_sym.x_misc.x_lnsz.x_lnno
- contains number of lines to '}' */
-
- fcn_last_line = main_aux->x_sym.x_misc.x_lnsz.x_lnno;
- new = pop_context ();
- if (context_stack_depth != 0)
- error ("invalid symbol data; .bf/.ef/.bb/.eb symbol mismatch, at symbol %d.",
- symnum);
-
- finish_block (new->name, &local_symbols, new->old_blocks,
- new->start_addr,
- fcn_cs_saved.c_value +
- fcn_aux_saved.x_sym.x_misc.x_fsize, objfile);
- within_function = 0;
- }
- break;
-
- case C_BSTAT : /* begin static block */
- static_block_base = read_symbol_nvalue (cs->c_value);
- break;
-
- case C_ESTAT : /* end of static block */
- static_block_base = 0;
- break;
-
- case C_ARG : /* These are not implemented. */
- case C_REGPARM :
- case C_TPDEF :
- case C_STRTAG :
- case C_UNTAG :
- case C_ENTAG :
- printf ("ERROR: Unimplemented storage class: %d.\n", cs->c_sclass);
- break;
-
- case C_HIDEXT : /* ignore these.. */
- case C_LABEL :
- case C_NULL :
- break;
-
- case C_BINCL : /* beginning of include file */
-
- /* In xlc output, C_BINCL/C_EINCL pair doesn't show up in sorted
- order. Thus, when wee see them, we might not know enough info
- to process them. Thus, we'll be saving them into a table
- (inclTable) and postpone their processing. */
-
- record_include_begin (cs);
- break;
-
- case C_EINCL : /* end of include file */
- /* see the comment after case C_BINCL. */
- record_include_end (cs);
- break;
-
- case C_BLOCK :
- if (STREQ (cs->c_name, ".bb")) {
- depth++;
- new = push_context (depth, cs->c_value);
- }
- else if (STREQ (cs->c_name, ".eb")) {
- new = pop_context ();
- if (depth != new->depth)
- error ("Invalid symbol data: .bb/.eb symbol mismatch at symbol %d.",
- symnum);
-
- depth--;
- if (local_symbols && context_stack_depth > 0) {
- /* Make a block for the local symbols within. */
- finish_block (new->name, &local_symbols, new->old_blocks,
- new->start_addr, cs->c_value, objfile);
+ default:
+ process_xcoff_symbol (cs, objfile);
+ break;
}
- local_symbols = new->locals;
- }
- break;
-
- default :
- process_xcoff_symbol (cs, objfile);
- break;
}
- } /* while */
-
if (last_source_file)
{
- end_symtab (cur_src_end_addr, 1, 0, objfile);
+ struct symtab *s;
+
+ complete_symtab (filestring, file_start_addr);
+ cur_src_end_addr = file_end_addr;
+ s = end_symtab (file_end_addr, objfile, SECT_OFF_TEXT);
+ /* When reading symbols for the last C_FILE of the objfile, try
+ to make sure that we set pst->symtab to the symtab for the
+ file, not to the _globals_ symtab. I'm not sure whether this
+ actually works right or when/if it comes up. */
+ if (pst->symtab == NULL)
+ pst->symtab = s;
end_stabs ();
}
-
- free (symtbl);
- current_objfile = NULL;
-
- /* Record the toc offset value of this symbol table into ldinfo structure.
- If no XMC_TC0 is found, toc_offset should be zero. Another place to obtain
- this information would be file auxiliary header. */
-
-#ifndef FAKING_RS6000
- xcoff_add_toc_to_loadinfo (toc_offset);
-#endif
}
#define SYMBOL_DUP(SYMBOL1, SYMBOL2) \
#define SYMNAME_ALLOC(NAME, ALLOCED) \
- (ALLOCED) ? (NAME) : obstack_copy0 (&objfile->symbol_obstack, (NAME), strlen (NAME));
+ (ALLOCED) ? (NAME) : obsavestring ((NAME), strlen (NAME), &objfile->symbol_obstack);
+static struct type *func_symbol_type;
+static struct type *var_symbol_type;
+
/* process one xcoff symbol. */
static struct symbol *
struct symbol onesymbol;
register struct symbol *sym = &onesymbol;
struct symbol *sym2 = NULL;
- struct type *ttype;
- char *name, *pp, *qq;
- int struct_and_type_combined;
- int nameless;
+ char *name, *pp;
+
+ int sec;
+ CORE_ADDR off;
+
+ if (cs->c_secnum < 0)
+ {
+ /* The value is a register number, offset within a frame, etc.,
+ and does not get relocated. */
+ off = 0;
+ sec = -1;
+ }
+ else
+ {
+ sec = secnum_to_section (cs->c_secnum, objfile);
+ off = ANOFFSET (objfile->section_offsets, sec);
+ }
name = cs->c_name;
if (name[0] == '.')
++name;
- bzero (sym, sizeof (struct symbol));
+ memset (sym, '\0', sizeof (struct symbol));
/* default assumptions */
- SYMBOL_VALUE (sym) = cs->c_value;
+ SYMBOL_VALUE (sym) = cs->c_value + off;
SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
+ SYMBOL_SECTION (sym) = secnum_to_section (cs->c_secnum, objfile);
- if (ISFCN (cs->c_type)) {
-
- /* At this point, we don't know the type of the function and assume it
- is int. This will be patched with the type from its stab entry later
- on in patch_block_stabs () */
-
- SYMBOL_NAME (sym) = SYMNAME_ALLOC (name, symname_alloced);
- SYMBOL_TYPE (sym) = lookup_function_type (lookup_fundamental_type (objfile, FT_INTEGER));
-
- SYMBOL_CLASS (sym) = LOC_BLOCK;
- SYMBOL_DUP (sym, sym2);
-
- if (cs->c_sclass == C_EXT)
- add_symbol_to_list (sym2, &global_symbols);
- else if (cs->c_sclass == C_HIDEXT || cs->c_sclass == C_STAT)
- add_symbol_to_list (sym2, &file_symbols);
- }
-
- else {
-
- /* in case we can't figure out the type, default is `int'. */
- SYMBOL_TYPE (sym) = lookup_fundamental_type (objfile, FT_INTEGER);
-
- switch (cs->c_sclass)
+ if (ISFCN (cs->c_type))
{
-#if 0
- case C_FUN:
- if (fcn_cs_saved.c_sclass == C_EXT)
- add_stab_to_list (name, &global_stabs);
- else
- add_stab_to_list (name, &file_stabs);
- break;
-#endif
+ /* At this point, we don't know the type of the function. This
+ will be patched with the type from its stab entry later on in
+ patch_block_stabs (), unless the file was compiled without -g. */
- case C_DECL: /* a type decleration?? */
-
-#if defined(NO_TYPEDEFS) || defined(NO_DEFINE_SYMBOL)
- qq = (char*) strchr (name, ':');
- if (!qq) /* skip if there is no ':' */
- return NULL;
-
- nameless = (qq == name);
-
- struct_and_type_combined = (qq[1] == 'T' && qq[2] == 't');
- pp = qq + (struct_and_type_combined ? 3 : 2);
-
-
- /* To handle GNU C++ typename abbreviation, we need to be able to fill
- in a type's name as soon as space for that type is allocated. */
-
- if (struct_and_type_combined && name != qq) {
-
- int typenums[2];
- struct type *tmp_type;
- char *tmp_pp = pp;
-
- read_type_number (&tmp_pp, typenums);
- tmp_type = dbx_alloc_type (typenums, objfile);
-
- if (tmp_type && !TYPE_NAME (tmp_type) && !nameless)
- TYPE_NAME (tmp_type) = SYMBOL_NAME (sym) =
- obsavestring (name, qq-name,
- &objfile->symbol_obstack);
- }
- ttype = SYMBOL_TYPE (sym) = read_type (&pp, objfile);
-
- /* if there is no name for this typedef, you don't have to keep its
- symbol, since nobody could ask for it. Otherwise, build a symbol
- and add it into symbol_list. */
-
- if (nameless)
- return;
+ SYMBOL_NAME (sym) = SYMNAME_ALLOC (name, symname_alloced);
+ SYMBOL_TYPE (sym) = func_symbol_type;
-#ifdef NO_TYPEDEFS
- /* Transarc wants to eliminate type definitions from the symbol table.
- Limited debugging capabilities, but faster symbol table processing
- and less memory usage. Note that tag definitions (starting with
- 'T') will remain intact. */
+ SYMBOL_CLASS (sym) = LOC_BLOCK;
+ SYMBOL_DUP (sym, sym2);
- if (qq[1] != 'T' && (!TYPE_NAME (ttype) || *(TYPE_NAME (ttype)) == '\0')) {
+ if (cs->c_sclass == C_EXT)
+ add_symbol_to_list (sym2, &global_symbols);
+ else if (cs->c_sclass == C_HIDEXT || cs->c_sclass == C_STAT)
+ add_symbol_to_list (sym2, &file_symbols);
+ }
+ else
+ {
+ /* In case we can't figure out the type, provide default. */
+ SYMBOL_TYPE (sym) = var_symbol_type;
- if (SYMBOL_NAME (sym))
- TYPE_NAME (ttype) = SYMBOL_NAME (sym);
+ switch (cs->c_sclass)
+ {
+#if 0
+ /* The values of functions and global symbols are now resolved
+ via the global_sym_chain in stabsread.c. */
+ case C_FUN:
+ if (fcn_cs_saved.c_sclass == C_EXT)
+ add_stab_to_list (name, &global_stabs);
else
- TYPE_NAME (ttype) = obsavestring (name, qq-name);
-
- return;
- }
-
-#endif /* !NO_TYPEDEFS */
-
- /* read_type() will return null if type (or tag) definition was
- unnnecessarily duplicated. Also, if the symbol doesn't have a name,
- there is no need to keep it in symbol table. */
- /* The above argument no longer valid. read_type() never returns NULL. */
-
- if (!ttype)
- return NULL;
-
- /* if there is no name for this typedef, you don't have to keep its
- symbol, since nobody could ask for it. Otherwise, build a symbol
- and add it into symbol_list. */
-
- if (qq[1] == 'T')
- SYMBOL_NAMESPACE (sym) = STRUCT_NAMESPACE;
- else if (qq[1] == 't')
- SYMBOL_NAMESPACE (sym) = VAR_NAMESPACE;
- else {
- warning ("Unrecognized stab string.\n");
- return NULL;
- }
-
- SYMBOL_CLASS (sym) = LOC_TYPEDEF;
- if (!SYMBOL_NAME (sym))
- SYMBOL_NAME (sym) = obsavestring (name, qq-name);
-
- SYMBOL_DUP (sym, sym2);
- add_symbol_to_list
- (sym2, within_function ? &local_symbols : &file_symbols);
-
- /* For a combination of struct and type, add one more symbol
- for the type. */
-
- if (struct_and_type_combined) {
- SYMBOL_DUP (sym, sym2);
- SYMBOL_NAMESPACE (sym2) = VAR_NAMESPACE;
- add_symbol_to_list
- (sym2, within_function ? &local_symbols : &file_symbols);
- }
-
- /* assign a name to the type node. */
-
- if (!TYPE_NAME (ttype) || *(TYPE_NAME (ttype)) == '\0') {
- if (struct_and_type_combined)
- TYPE_NAME (ttype) = SYMBOL_NAME (sym);
- else if (qq[1] == 'T') /* struct namespace */
- TYPE_NAME (ttype) = concat (
- TYPE_CODE (ttype) == TYPE_CODE_UNION ? "union " :
- TYPE_CODE (ttype) == TYPE_CODE_STRUCT? "struct " : "enum ",
- SYMBOL_NAME (sym), NULL);
- }
- break;
-
-#else /* !NO_DEFINE_SYMBOL */
- return define_symbol (cs->c_value, cs->c_name, 0, 0, objfile);
-#endif
+ add_stab_to_list (name, &file_stabs);
+ break;
- case C_GSYM:
- add_stab_to_list (name, &global_stabs);
- break;
-
- case C_PSYM:
- case C_RPSYM:
-
-#ifdef NO_DEFINE_SYMBOL
- if (*name == ':' || (pp = (char *) strchr (name, ':')) == NULL)
- return NULL;
- SYMBOL_NAME (sym) = obsavestring (name, pp-name, &objfile -> symbol_obstack);
- SYMBOL_CLASS (sym) = (cs->c_sclass == C_PSYM) ? LOC_ARG : LOC_REGPARM;
- pp += 2;
- SYMBOL_TYPE (sym) = read_type (&pp, objfile);
- SYMBOL_DUP (sym, sym2);
- add_symbol_to_list (sym2, &local_symbols);
- break;
-#else
- sym = define_symbol (cs->c_value, cs->c_name, 0, 0, objfile);
- SYMBOL_CLASS (sym) = (cs->c_sclass == C_PSYM) ? LOC_ARG : LOC_REGPARM;
- return sym;
+ case C_GSYM:
+ add_stab_to_list (name, &global_stabs);
+ break;
#endif
- case C_STSYM:
-
-#ifdef NO_DEFINE_SYMBOL
- if (*name == ':' || (pp = (char *) strchr (name, ':')) == NULL)
- return NULL;
- SYMBOL_NAME (sym) = obsavestring (name, pp-name, &objfile -> symbol_obstack);
- SYMBOL_CLASS (sym) = LOC_STATIC;
- SYMBOL_VALUE (sym) += static_block_base;
- pp += 2;
- SYMBOL_TYPE (sym) = read_type (&pp, objfile);
- SYMBOL_DUP (sym, sym2);
- add_symbol_to_list
- (sym2, within_function ? &local_symbols : &file_symbols);
- break;
-#else
- /* If we are going to use Sun dbx's define_symbol(), we need to
- massage our stab string a little. Change 'V' type to 'S' to be
- comparible with Sun. */
-
- if (*name == ':' || (pp = (char *) index (name, ':')) == NULL)
- return NULL;
-
- ++pp;
- if (*pp == 'V') *pp = 'S';
- sym = define_symbol (cs->c_value, cs->c_name, 0, 0, objfile);
- SYMBOL_VALUE (sym) += static_block_base;
- return sym;
-#endif
+ case C_BCOMM:
+ common_block_start (cs->c_name, objfile);
+ break;
- case C_LSYM:
- if (*name == ':' || (pp = (char *) strchr (name, ':')) == NULL)
- return NULL;
- SYMBOL_NAME (sym) = obsavestring (name, pp-name, &objfile -> symbol_obstack);
- SYMBOL_CLASS (sym) = LOC_LOCAL;
- pp += 1;
- SYMBOL_TYPE (sym) = read_type (&pp, objfile);
- SYMBOL_DUP (sym, sym2);
- add_symbol_to_list (sym2, &local_symbols);
- break;
-
- case C_AUTO:
- SYMBOL_CLASS (sym) = LOC_LOCAL;
- SYMBOL_NAME (sym) = SYMNAME_ALLOC (name, symname_alloced);
- SYMBOL_DUP (sym, sym2);
- add_symbol_to_list (sym2, &local_symbols);
- break;
+ case C_ECOMM:
+ common_block_end (objfile);
+ break;
- case C_EXT:
- SYMBOL_CLASS (sym) = LOC_STATIC;
- SYMBOL_NAME (sym) = SYMNAME_ALLOC (name, symname_alloced);
- SYMBOL_DUP (sym, sym2);
- add_symbol_to_list (sym2, &global_symbols);
- break;
+ default:
+ complain (&storclass_complaint, cs->c_sclass);
+ /* FALLTHROUGH */
- case C_STAT:
- SYMBOL_CLASS (sym) = LOC_STATIC;
- SYMBOL_NAME (sym) = SYMNAME_ALLOC (name, symname_alloced);
- SYMBOL_DUP (sym, sym2);
- add_symbol_to_list
- (sym2, within_function ? &local_symbols : &file_symbols);
- break;
+ case C_DECL:
+ case C_PSYM:
+ case C_RPSYM:
+ case C_ECOML:
+ case C_LSYM:
+ case C_RSYM:
+ case C_GSYM:
- case C_REG:
- printf ("ERROR! C_REG is not fully implemented!\n");
- SYMBOL_CLASS (sym) = LOC_REGISTER;
- SYMBOL_NAME (sym) = SYMNAME_ALLOC (name, symname_alloced);
- SYMBOL_DUP (sym, sym2);
- add_symbol_to_list (sym2, &local_symbols);
- break;
-
- case C_RSYM:
- pp = (char*) strchr (name, ':');
-#ifdef NO_DEFINE_SYMBOL
- SYMBOL_CLASS (sym) = LOC_REGISTER;
- SYMBOL_VALUE (sym) = STAB_REG_TO_REGNUM (cs->c_value);
- if (pp) {
- SYMBOL_NAME (sym) = obsavestring (name, pp-name, &objfile -> symbol_obstack);
- pp += 2;
- if (*pp)
- SYMBOL_TYPE (sym) = read_type (&pp, objfile);
- }
- else
- /* else this is not a stab entry, suppose the type is either
- `int' or `float', depending on the register class. */
+ {
+ sym = define_symbol (cs->c_value + off, cs->c_name, 0, 0, objfile);
+ if (sym != NULL)
+ {
+ SYMBOL_SECTION (sym) = sec;
+ }
+ return sym;
+ }
- SYMBOL_TYPE (sym) = (SYMBOL_VALUE (sym) < 32)
- ? lookup_fundamental_type (objfile, FT_INTEGER)
- : lookup_fundamental_type (objfile, FT_FLOAT);
+ case C_STSYM:
- SYMBOL_DUP (sym, sym2);
- add_symbol_to_list (sym2, &local_symbols);
- break;
-#else
- if (pp) {
- sym = define_symbol (cs->c_value, cs->c_name, 0, 0, objfile);
+ /* For xlc (not GCC), the 'V' symbol descriptor is used for
+ all statics and we need to distinguish file-scope versus
+ function-scope using within_function. We do this by
+ changing the string we pass to define_symbol to use 'S'
+ where we need to, which is not necessarily super-clean,
+ but seems workable enough. */
+
+ if (*name == ':' || (pp = (char *) strchr(name, ':')) == NULL)
+ return NULL;
+
+ ++pp;
+ if (*pp == 'V' && !within_function)
+ *pp = 'S';
+ sym = define_symbol ((cs->c_value
+ + ANOFFSET (objfile->section_offsets,
+ static_block_section)),
+ cs->c_name, 0, 0, objfile);
+ if (sym != NULL)
+ {
+ SYMBOL_VALUE (sym) += static_block_base;
+ SYMBOL_SECTION (sym) = static_block_section;
+ }
return sym;
- }
- else {
- complain (&rsym_complaint, name);
- return NULL;
- }
-#endif
- default :
- complain (&storclass_complaint, cs->c_sclass);
- return NULL;
+ }
}
- }
return sym2;
}
+/* Extract the file name from the aux entry of a C_FILE symbol.
+ Result is in static storage and is only good for temporary use. */
+
+static char *
+coff_getfilename (aux_entry, objfile)
+ union internal_auxent *aux_entry;
+ struct objfile *objfile;
+{
+ static char buffer[BUFSIZ];
+
+ if (aux_entry->x_file.x_n.x_zeroes == 0)
+ strcpy (buffer,
+ ((struct coff_symfile_info *)objfile->sym_private)->strtbl
+ + aux_entry->x_file.x_n.x_offset);
+ else
+ {
+ strncpy (buffer, aux_entry->x_file.x_fname, FILNMLEN);
+ buffer[FILNMLEN] = '\0';
+ }
+ return (buffer);
+}
+
+/* Set *SYMBOL to symbol number symno in symtbl. */
+static void
+read_symbol (symbol, symno)
+ struct internal_syment *symbol;
+ int symno;
+{
+ int nsyms =
+ ((struct coff_symfile_info *)this_symtab_psymtab->objfile->sym_private)
+ ->symtbl_num_syms;
+ char *stbl =
+ ((struct coff_symfile_info *)this_symtab_psymtab->objfile->sym_private)
+ ->symtbl;
+ if (symno < 0 || symno >= nsyms)
+ {
+ static struct complaint msg =
+ {"Invalid symbol offset", 0, 0};
+ complain (&msg);
+ symbol->n_value = 0;
+ symbol->n_scnum = -1;
+ return;
+ }
+ bfd_coff_swap_sym_in (this_symtab_psymtab->objfile->obfd,
+ stbl + (symno*local_symesz),
+ symbol);
+}
+
/* Get value corresponding to symbol number symno in symtbl. */
static int
{
struct internal_syment symbol[1];
- if (symno < 0 || symno >= symtbl_num_syms)
- {
- struct complaint msg =
- {"Invalid symbol offset", 0, 0};
- complain (&msg);
- return 0;
- }
- bfd_coff_swap_sym_in (symfile_bfd, symtbl + (symno*local_symesz), symbol);
+ read_symbol (symbol, symno);
return symbol->n_value;
}
static int
read_symbol_lineno (symno)
- int symno;
+ int symno;
{
+ int nsyms =
+ ((struct coff_symfile_info *)this_symtab_psymtab->objfile->sym_private)
+ ->symtbl_num_syms;
+ char *stbl =
+ ((struct coff_symfile_info *)this_symtab_psymtab->objfile->sym_private)
+ ->symtbl;
struct internal_syment symbol[1];
union internal_auxent main_aux[1];
+ if (symno < 0)
+ {
+ complain (&bf_notfound_complaint);
+ return 0;
+ }
+
/* Note that just searching for a short distance (e.g. 50 symbols)
is not enough, at least in the following case.
What happens here is that the assembler moves the .stabx entries
to right before the ".bf" for foo, but the symbol for "foo" is before
all the stabx entries. See PR gdb/2222. */
- while (symno < symtbl_num_syms) {
- bfd_coff_swap_sym_in (symfile_bfd,
- symtbl + (symno*local_symesz), symbol);
- if (symbol->n_sclass == C_FCN && STREQ (symbol->n_name, ".bf"))
- goto gotit;
- symno += symbol->n_numaux+1;
- }
+
+ /* Maintaining a table of .bf entries might be preferable to this search.
+ If I understand things correctly it would need to be done only for
+ the duration of a single psymtab to symtab conversion. */
+ while (symno < nsyms)
+ {
+ bfd_coff_swap_sym_in (symfile_bfd,
+ stbl + (symno * local_symesz), symbol);
+ if (symbol->n_sclass == C_FCN && STREQ (symbol->n_name, ".bf"))
+ goto gotit;
+ symno += symbol->n_numaux + 1;
+ }
complain (&bf_notfound_complaint);
return 0;
gotit:
/* take aux entry and return its lineno */
symno++;
- bfd_coff_swap_aux_in (symfile_bfd, symtbl+(symno*local_symesz),
- symbol->n_type, symbol->n_sclass, main_aux);
+ bfd_coff_swap_aux_in (this_symtab_psymtab->objfile->obfd,
+ stbl + symno * local_symesz,
+ symbol->n_type, symbol->n_sclass,
+ 0, symbol->n_numaux, main_aux);
return main_aux->x_sym.x_misc.x_lnsz.x_lnno;
}
* mainline code can read the whole thing for efficiency.
*/
static void
-find_linenos(abfd, asect, vpinfo)
-bfd *abfd;
-sec_ptr asect;
-PTR vpinfo;
+find_linenos (abfd, asect, vpinfo)
+ bfd *abfd;
+ sec_ptr asect;
+ PTR vpinfo;
{
struct coff_symfile_info *info;
int size, count;
if (!STREQ (asect->name, ".text") || count == 0)
return;
- size = count * coff_data (symfile_bfd)->local_linesz;
- info = (struct coff_symfile_info *)vpinfo;
+ size = count * coff_data (abfd)->local_linesz;
+ info = (struct coff_symfile_info *)vpinfo;
offset = asect->line_filepos;
maxoff = offset + size;
if (maxoff > info->max_lineno_offset)
info->max_lineno_offset = maxoff;
}
+\f
+static void xcoff_psymtab_to_symtab_1 PARAMS ((struct partial_symtab *));
+static void
+xcoff_psymtab_to_symtab_1 (pst)
+ struct partial_symtab *pst;
+{
+ struct cleanup *old_chain;
+ int i;
+
+ if (!pst)
+ return;
-/* Read in all the line numbers for fast lookups later. Leave them in
- external (unswapped) format in memory; we'll swap them as we enter
- them into GDB's data structures. */
+ if (pst->readin)
+ {
+ fprintf_unfiltered
+ (gdb_stderr, "Psymtab for %s already read in. Shouldn't happen.\n",
+ pst->filename);
+ return;
+ }
-static int
-init_lineno (abfd, offset, size)
- bfd *abfd;
- file_ptr offset;
- int size;
-{
- int val;
+ /* Read in all partial symtabs on which this one is dependent */
+ for (i = 0; i < pst->number_of_dependencies; i++)
+ if (!pst->dependencies[i]->readin)
+ {
+ /* Inform about additional files that need to be read in. */
+ if (info_verbose)
+ {
+ fputs_filtered (" ", gdb_stdout);
+ wrap_here ("");
+ fputs_filtered ("and ", gdb_stdout);
+ wrap_here ("");
+ printf_filtered ("%s...", pst->dependencies[i]->filename);
+ wrap_here (""); /* Flush output */
+ gdb_flush (gdb_stdout);
+ }
+ xcoff_psymtab_to_symtab_1 (pst->dependencies[i]);
+ }
- if (bfd_seek(abfd, offset, L_SET) < 0)
- return -1;
+ if (((struct symloc *)pst->read_symtab_private)->numsyms != 0)
+ {
+ /* Init stuff necessary for reading in symbols. */
+ stabsread_init ();
+ buildsym_init ();
+ old_chain = make_cleanup (really_free_pendings, 0);
- linetab = (char *) xmalloc(size);
+ read_xcoff_symtab (pst);
+ sort_symtab_syms (pst->symtab);
- val = bfd_read(linetab, 1, size, abfd);
- if (val != size)
- return -1;
+ do_cleanups (old_chain);
+ }
- linetab_offset = offset;
- linetab_size = size;
- make_cleanup (free, linetab); /* Be sure it gets de-allocated. */
- return 0;
+ pst->readin = 1;
}
-\f
-/* dbx allows the text of a symbol name to be continued into the
- next symbol name! When such a continuation is encountered
- (a \ at the end of the text of a name)
- call this function to get the continuation. */
-/* So far, I haven't seen this happenning xlc output. I doubt we'll need this
- for xcoff. */
-#undef next_symbol_text
-#define next_symbol_text() \
- printf ("Gdb Error: symbol names on multiple lines not implemented.\n")
+static void xcoff_psymtab_to_symtab PARAMS ((struct partial_symtab *));
+
+/* Read in all of the symbols for a given psymtab for real.
+ Be verbose about it if the user wants that. */
+
+static void
+xcoff_psymtab_to_symtab (pst)
+ struct partial_symtab *pst;
+{
+ bfd *sym_bfd;
+
+ if (!pst)
+ return;
+
+ if (pst->readin)
+ {
+ fprintf_unfiltered
+ (gdb_stderr, "Psymtab for %s already read in. Shouldn't happen.\n",
+ pst->filename);
+ return;
+ }
+
+ if (((struct symloc *)pst->read_symtab_private)->numsyms != 0
+ || pst->number_of_dependencies)
+ {
+ /* Print the message now, before reading the string table,
+ to avoid disconcerting pauses. */
+ if (info_verbose)
+ {
+ printf_filtered ("Reading in symbols for %s...", pst->filename);
+ gdb_flush (gdb_stdout);
+ }
+
+ sym_bfd = pst->objfile->obfd;
+
+ next_symbol_text_func = xcoff_next_symbol_text;
+ xcoff_psymtab_to_symtab_1 (pst);
+ /* Match with global symbols. This only needs to be done once,
+ after all of the symtabs and dependencies have been read in. */
+ scan_file_globals (pst->objfile);
+
+ /* Finish up the debug error message. */
+ if (info_verbose)
+ printf_filtered ("done.\n");
+ }
+}
+\f
static void
xcoff_new_init (objfile)
struct objfile *objfile;
{
+ stabsread_new_init ();
+ buildsym_new_init ();
}
-
-/* xcoff_symfile_init()
- is the xcoff-specific initialization routine for reading symbols.
- It is passed an objfile which contains, among other things,
- the BFD for the file whose symbols are being read, and a slot for
- a pointer to "private data" which we fill with cookies and other
- treats for xcoff_symfile_read().
+/* Do initialization in preparation for reading symbols from OBJFILE.
We will only be called if this is an XCOFF or XCOFF-like file.
BFD handles figuring out the format of the file, and code in symfile.c
- uses BFD's determination to vector to us.
-
- The ultimate result is a new symtab (or, FIXME, eventually a psymtab). */
+ uses BFD's determination to vector to us. */
static void
xcoff_symfile_init (objfile)
- struct objfile *objfile;
+ struct objfile *objfile;
{
- bfd *abfd = objfile->obfd;
-
/* Allocate struct to keep track of the symfile */
objfile -> sym_private = xmmalloc (objfile -> md,
sizeof (struct coff_symfile_info));
+
+ /* XCOFF objects may be reordered, so set OBJF_REORDERED. If we
+ find this causes a significant slowdown in gdb then we could
+ set it in the debug symbol readers only when necessary. */
+ objfile->flags |= OBJF_REORDERED;
+
init_entry_point_info (objfile);
}
mfree (objfile -> md, objfile -> sym_private);
}
- /* Start with a fresh include table for the next objfile. */
-
+ /* Start with a fresh include table for the next objfile. */
if (inclTable)
{
free (inclTable);
}
-static int
-init_stringtab(abfd, offset, objfile)
+static void
+init_stringtab (abfd, offset, objfile)
bfd *abfd;
file_ptr offset;
struct objfile *objfile;
long length;
int val;
unsigned char lengthbuf[4];
+ char *strtbl;
+
+ ((struct coff_symfile_info *)objfile->sym_private)->strtbl = NULL;
- if (bfd_seek(abfd, offset, L_SET) < 0)
- return -1;
+ if (bfd_seek (abfd, offset, SEEK_SET) < 0)
+ error ("cannot seek to string table in %s: %s",
+ bfd_get_filename (abfd), bfd_errmsg (bfd_get_error ()));
- val = bfd_read((char *)lengthbuf, 1, sizeof lengthbuf, abfd);
- length = bfd_h_get_32(abfd, lengthbuf);
+ val = bfd_read ((char *)lengthbuf, 1, sizeof lengthbuf, abfd);
+ length = bfd_h_get_32 (abfd, lengthbuf);
/* If no string table is needed, then the file may end immediately
- after the symbols. Just return with `strtbl' set to null. */
+ after the symbols. Just return with `strtbl' set to NULL. */
- if (val != sizeof length || length < sizeof length)
- return 0;
+ if (val != sizeof lengthbuf || length < sizeof lengthbuf)
+ return;
/* Allocate string table from symbol_obstack. We will need this table
as long as we have its symbol table around. */
- strtbl = (char*) obstack_alloc (&objfile->symbol_obstack, length);
- if (strtbl == NULL)
- return -1;
+ strtbl = (char *) obstack_alloc (&objfile->symbol_obstack, length);
+ ((struct coff_symfile_info *)objfile->sym_private)->strtbl = strtbl;
- bcopy(&length, strtbl, sizeof length);
- if (length == sizeof length)
- return 0;
+ /* Copy length buffer, the first byte is usually zero and is
+ used for stabs with a name length of zero. */
+ memcpy (strtbl, lengthbuf, sizeof lengthbuf);
+ if (length == sizeof lengthbuf)
+ return;
- val = bfd_read(strtbl + sizeof length, 1, length - sizeof length, abfd);
+ val = bfd_read (strtbl + sizeof lengthbuf, 1, length - sizeof lengthbuf,
+ abfd);
- if (val != length - sizeof length || strtbl[length - 1] != '\0')
- return -1;
+ if (val != length - sizeof lengthbuf)
+ error ("cannot read string table from %s: %s",
+ bfd_get_filename (abfd), bfd_errmsg (bfd_get_error ()));
+ if (strtbl[length - 1] != '\0')
+ error ("bad symbol file: string table does not end with null character");
- return 0;
+ return;
}
+\f
+/* If we have not yet seen a function for this psymtab, this is 0. If we
+ have seen one, it is the offset in the line numbers of the line numbers
+ for the psymtab. */
+static unsigned int first_fun_line_offset;
-static int
-init_debugsection(abfd)
- bfd *abfd;
+static struct partial_symtab *xcoff_start_psymtab
+ PARAMS ((struct objfile *, struct section_offsets *, char *, int,
+ struct partial_symbol **, struct partial_symbol **));
+
+/* Allocate and partially fill a partial symtab. It will be
+ completely filled at the end of the symbol list.
+
+ SYMFILE_NAME is the name of the symbol-file we are reading from, and ADDR
+ is the address relative to which its symbols are (incremental) or 0
+ (normal). */
+
+static struct partial_symtab *
+xcoff_start_psymtab (objfile, section_offsets,
+ filename, first_symnum, global_syms, static_syms)
+ struct objfile *objfile;
+ struct section_offsets *section_offsets;
+ char *filename;
+ int first_symnum;
+ struct partial_symbol **global_syms;
+ struct partial_symbol **static_syms;
{
- register sec_ptr secp;
- bfd_size_type length;
+ struct partial_symtab *result =
+ start_psymtab_common (objfile, section_offsets,
+ filename,
+ /* We fill in textlow later. */
+ 0,
+ global_syms, static_syms);
+
+ result->read_symtab_private = (char *)
+ obstack_alloc (&objfile -> psymbol_obstack, sizeof (struct symloc));
+ ((struct symloc *)result->read_symtab_private)->first_symnum = first_symnum;
+ result->read_symtab = xcoff_psymtab_to_symtab;
+
+ /* Deduce the source language from the filename for this psymtab. */
+ psymtab_language = deduce_language_from_filename (filename);
+
+ return result;
+}
- if (debugsec) {
- free(debugsec);
- debugsec = NULL;
- }
+static struct partial_symtab *xcoff_end_psymtab
+ PARAMS ((struct partial_symtab *, char **, int, int,
+ struct partial_symtab **, int, int));
- secp = bfd_get_section_by_name(abfd, ".debug");
- if (!secp)
- return 0;
+/* Close off the current usage of PST.
+ Returns PST, or NULL if the partial symtab was empty and thrown away.
- if (!(length = bfd_section_size(abfd, secp)))
- return 0;
+ CAPPING_SYMBOL_NUMBER is the end of pst (exclusive).
- debugsec = (char *) xmalloc ((unsigned)length);
- if (debugsec == NULL)
- return -1;
+ INCLUDE_LIST, NUM_INCLUDES, DEPENDENCY_LIST, and NUMBER_DEPENDENCIES
+ are the information for includes and dependencies. */
- if (!bfd_get_section_contents(abfd, secp, debugsec, (file_ptr) 0, length)) {
- printf ("Can't read .debug section from symbol file\n");
- return -1;
- }
- return 0;
+static struct partial_symtab *
+xcoff_end_psymtab (pst, include_list, num_includes, capping_symbol_number,
+ dependency_list, number_dependencies, textlow_not_set)
+ struct partial_symtab *pst;
+ char **include_list;
+ int num_includes;
+ int capping_symbol_number;
+ struct partial_symtab **dependency_list;
+ int number_dependencies;
+ int textlow_not_set;
+{
+ int i;
+ struct objfile *objfile = pst -> objfile;
+
+ if (capping_symbol_number != -1)
+ ((struct symloc *)pst->read_symtab_private)->numsyms =
+ capping_symbol_number
+ - ((struct symloc *)pst->read_symtab_private)->first_symnum;
+ ((struct symloc *)pst->read_symtab_private)->lineno_off =
+ first_fun_line_offset;
+ first_fun_line_offset = 0;
+ pst->n_global_syms =
+ objfile->global_psymbols.next - (objfile->global_psymbols.list + pst->globals_offset);
+ pst->n_static_syms =
+ objfile->static_psymbols.next - (objfile->static_psymbols.list + pst->statics_offset);
+
+ pst->number_of_dependencies = number_dependencies;
+ if (number_dependencies)
+ {
+ pst->dependencies = (struct partial_symtab **)
+ obstack_alloc (&objfile->psymbol_obstack,
+ number_dependencies * sizeof (struct partial_symtab *));
+ memcpy (pst->dependencies, dependency_list,
+ number_dependencies * sizeof (struct partial_symtab *));
+ }
+ else
+ pst->dependencies = 0;
+
+ for (i = 0; i < num_includes; i++)
+ {
+ struct partial_symtab *subpst =
+ allocate_psymtab (include_list[i], objfile);
+
+ subpst->section_offsets = pst->section_offsets;
+ subpst->read_symtab_private =
+ (char *) obstack_alloc (&objfile->psymbol_obstack,
+ sizeof (struct symloc));
+ ((struct symloc *)subpst->read_symtab_private)->first_symnum = 0;
+ ((struct symloc *)subpst->read_symtab_private)->numsyms = 0;
+ subpst->textlow = 0;
+ subpst->texthigh = 0;
+
+ /* We could save slight bits of space by only making one of these,
+ shared by the entire set of include files. FIXME-someday. */
+ subpst->dependencies = (struct partial_symtab **)
+ obstack_alloc (&objfile->psymbol_obstack,
+ sizeof (struct partial_symtab *));
+ subpst->dependencies[0] = pst;
+ subpst->number_of_dependencies = 1;
+
+ subpst->globals_offset =
+ subpst->n_global_syms =
+ subpst->statics_offset =
+ subpst->n_static_syms = 0;
+
+ subpst->readin = 0;
+ subpst->symtab = 0;
+ subpst->read_symtab = pst->read_symtab;
+ }
+
+ sort_pst_symbols (pst);
+
+ /* If there is already a psymtab or symtab for a file of this name,
+ remove it. (If there is a symtab, more drastic things also
+ happen.) This happens in VxWorks. */
+ free_named_symtabs (pst->filename);
+
+ if (num_includes == 0
+ && number_dependencies == 0
+ && pst->n_global_syms == 0
+ && pst->n_static_syms == 0)
+ {
+ /* Throw away this psymtab, it's empty. We can't deallocate it, since
+ it is on the obstack, but we can forget to chain it on the list. */
+ /* Empty psymtabs happen as a result of header files which don't have
+ any symbols in them. There can be a lot of them. */
+
+ discard_psymtab (pst);
+
+ /* Indicate that psymtab was thrown away. */
+ pst = (struct partial_symtab *)NULL;
+ }
+ return pst;
+}
+
+static void swap_sym PARAMS ((struct internal_syment *,
+ union internal_auxent *, char **, char **,
+ unsigned int *,
+ struct objfile *));
+
+/* Swap raw symbol at *RAW and put the name in *NAME, the symbol in
+ *SYMBOL, the first auxent in *AUX. Advance *RAW and *SYMNUMP over
+ the symbol and its auxents. */
+
+static void
+swap_sym (symbol, aux, name, raw, symnump, objfile)
+ struct internal_syment *symbol;
+ union internal_auxent *aux;
+ char **name;
+ char **raw;
+ unsigned int *symnump;
+ struct objfile *objfile;
+{
+ bfd_coff_swap_sym_in (objfile->obfd, *raw, symbol);
+ if (symbol->n_zeroes)
+ {
+ /* If it's exactly E_SYMNMLEN characters long it isn't
+ '\0'-terminated. */
+ if (symbol->n_name[E_SYMNMLEN - 1] != '\0')
+ {
+ /* FIXME: wastes memory for symbols which we don't end up putting
+ into the minimal symbols. */
+ char *p;
+ p = obstack_alloc (&objfile->psymbol_obstack, E_SYMNMLEN + 1);
+ strncpy (p, symbol->n_name, E_SYMNMLEN);
+ p[E_SYMNMLEN] = '\0';
+ *name = p;
+ }
+ else
+ /* Point to the unswapped name as that persists as long as the
+ objfile does. */
+ *name = ((struct external_syment *)*raw)->e.e_name;
+ }
+ else if (symbol->n_sclass & 0x80)
+ {
+ *name = ((struct coff_symfile_info *)objfile->sym_private)->debugsec
+ + symbol->n_offset;
+ }
+ else
+ {
+ *name = ((struct coff_symfile_info *)objfile->sym_private)->strtbl
+ + symbol->n_offset;
+ }
+ ++*symnump;
+ *raw += coff_data (objfile->obfd)->local_symesz;
+ if (symbol->n_numaux > 0)
+ {
+ bfd_coff_swap_aux_in (objfile->obfd, *raw, symbol->n_type,
+ symbol->n_sclass, 0, symbol->n_numaux, aux);
+
+ *symnump += symbol->n_numaux;
+ *raw += coff_data (objfile->obfd)->local_symesz * symbol->n_numaux;
+ }
}
static void
-free_debugsection()
+scan_xcoff_symtab (section_offsets, objfile)
+ struct section_offsets *section_offsets;
+ struct objfile *objfile;
+{
+ CORE_ADDR toc_offset = 0; /* toc offset value in data section. */
+ char *filestring = NULL;
+
+ char *namestring;
+ int past_first_source_file = 0;
+ bfd *abfd;
+ asection *bfd_sect;
+ unsigned int nsyms;
+
+ /* Current partial symtab */
+ struct partial_symtab *pst;
+
+ /* List of current psymtab's include files */
+ char **psymtab_include_list;
+ int includes_allocated;
+ int includes_used;
+
+ /* Index within current psymtab dependency list */
+ struct partial_symtab **dependency_list;
+ int dependencies_used, dependencies_allocated;
+
+ char *sraw_symbol;
+ struct internal_syment symbol;
+ union internal_auxent main_aux;
+ unsigned int ssymnum;
+
+ char *last_csect_name = NULL; /* last seen csect's name and value */
+ CORE_ADDR last_csect_val = 0;
+ int last_csect_sec = 0;
+ int misc_func_recorded = 0; /* true if any misc. function */
+ int textlow_not_set = 1;
+
+ pst = (struct partial_symtab *) 0;
+
+ includes_allocated = 30;
+ includes_used = 0;
+ psymtab_include_list = (char **) alloca (includes_allocated *
+ sizeof (char *));
+
+ dependencies_allocated = 30;
+ dependencies_used = 0;
+ dependency_list =
+ (struct partial_symtab **) alloca (dependencies_allocated *
+ sizeof (struct partial_symtab *));
+
+ last_source_file = NULL;
+
+ abfd = objfile->obfd;
+
+ sraw_symbol = ((struct coff_symfile_info *)objfile->sym_private)->symtbl;
+ nsyms = ((struct coff_symfile_info *)objfile->sym_private)->symtbl_num_syms;
+ ssymnum = 0;
+ while (ssymnum < nsyms)
+ {
+ int sclass = ((struct external_syment *)sraw_symbol)->e_sclass[0] & 0xff;
+ /* This is the type we pass to partial-stab.h. A less kludgy solution
+ would be to break out partial-stab.h into its various parts--shuffle
+ off the DBXREAD_ONLY stuff to dbxread.c, and make separate
+ pstab-norm.h (for most types), pstab-sol.h (for N_SOL), etc. */
+ int stype;
+
+ QUIT;
+
+ switch (sclass)
+ {
+ case C_EXT:
+ case C_HIDEXT:
+ {
+ /* The CSECT auxent--always the last auxent. */
+ union internal_auxent csect_aux;
+ unsigned int symnum_before = ssymnum;
+
+ swap_sym (&symbol, &main_aux, &namestring, &sraw_symbol,
+ &ssymnum, objfile);
+ if (symbol.n_numaux > 1)
+ {
+ bfd_coff_swap_aux_in
+ (objfile->obfd,
+ sraw_symbol - coff_data(abfd)->local_symesz,
+ symbol.n_type,
+ symbol.n_sclass,
+ symbol.n_numaux - 1,
+ symbol.n_numaux,
+ &csect_aux);
+ }
+ else
+ csect_aux = main_aux;
+
+ /* If symbol name starts with ".$" or "$", ignore it. */
+ if (namestring[0] == '$'
+ || (namestring[0] == '.' && namestring[1] == '$'))
+ break;
+
+ switch (csect_aux.x_csect.x_smtyp & 0x7)
+ {
+ case XTY_SD:
+ switch (csect_aux.x_csect.x_smclas)
+ {
+ case XMC_PR:
+ if (last_csect_name)
+ {
+ /* If no misc. function recorded in the last
+ seen csect, enter it as a function. This
+ will take care of functions like strcmp()
+ compiled by xlc. */
+
+ if (!misc_func_recorded)
+ {
+ RECORD_MINIMAL_SYMBOL
+ (last_csect_name, last_csect_val,
+ mst_text, last_csect_sec,
+ objfile);
+ }
+
+ if (pst != NULL)
+ {
+ /* We have to allocate one psymtab for
+ each program csect, because their text
+ sections need not be adjacent. */
+ xcoff_end_psymtab
+ (pst, psymtab_include_list, includes_used,
+ symnum_before, dependency_list,
+ dependencies_used, textlow_not_set);
+ includes_used = 0;
+ dependencies_used = 0;
+ /* Give all psymtabs for this source file the same
+ name. */
+ pst = xcoff_start_psymtab
+ (objfile, section_offsets,
+ filestring,
+ symnum_before,
+ objfile->global_psymbols.next,
+ objfile->static_psymbols.next);
+ }
+ }
+ if (namestring && namestring[0] == '.')
+ {
+ last_csect_name = namestring;
+ last_csect_val = symbol.n_value;
+ last_csect_sec =
+ secnum_to_section (symbol.n_scnum, objfile);
+ }
+ if (pst != NULL)
+ {
+ CORE_ADDR highval =
+ symbol.n_value + csect_aux.x_csect.x_scnlen.l;
+ if (highval > pst->texthigh)
+ pst->texthigh = highval;
+ if (pst->textlow == 0 || symbol.n_value < pst->textlow)
+ pst->textlow = symbol.n_value;
+ }
+ misc_func_recorded = 0;
+ break;
+
+ case XMC_RW:
+ /* Data variables are recorded in the minimal symbol
+ table, except for section symbols. */
+ if (*namestring != '.')
+ prim_record_minimal_symbol_and_info
+ (namestring, symbol.n_value,
+ sclass == C_HIDEXT ? mst_file_data : mst_data,
+ NULL, secnum_to_section (symbol.n_scnum, objfile),
+ NULL, objfile);
+ break;
+
+ case XMC_TC0:
+ if (toc_offset)
+ warning ("More than one XMC_TC0 symbol found.");
+ toc_offset = symbol.n_value;
+
+ /* Make TOC offset relative to start address of section. */
+ bfd_sect = secnum_to_bfd_section (symbol.n_scnum, objfile);
+ if (bfd_sect)
+ toc_offset -= bfd_section_vma (objfile->obfd, bfd_sect);
+ break;
+
+ case XMC_TC:
+ /* These symbols tell us where the TOC entry for a
+ variable is, not the variable itself. */
+ break;
+
+ default:
+ break;
+ }
+ break;
+
+ case XTY_LD:
+ switch (csect_aux.x_csect.x_smclas)
+ {
+ case XMC_PR:
+ /* A function entry point. */
+
+ if (first_fun_line_offset == 0 && symbol.n_numaux > 1)
+ first_fun_line_offset =
+ main_aux.x_sym.x_fcnary.x_fcn.x_lnnoptr;
+ RECORD_MINIMAL_SYMBOL
+ (namestring, symbol.n_value,
+ sclass == C_HIDEXT ? mst_file_text : mst_text,
+ secnum_to_section (symbol.n_scnum, objfile),
+ objfile);
+ break;
+
+ case XMC_GL:
+ /* shared library function trampoline code entry
+ point. */
+
+ /* record trampoline code entries as
+ mst_solib_trampoline symbol. When we lookup mst
+ symbols, we will choose mst_text over
+ mst_solib_trampoline. */
+ RECORD_MINIMAL_SYMBOL
+ (namestring, symbol.n_value,
+ mst_solib_trampoline,
+ secnum_to_section (symbol.n_scnum, objfile),
+ objfile);
+ break;
+
+ case XMC_DS:
+ /* The symbols often have the same names as
+ debug symbols for functions, and confuse
+ lookup_symbol. */
+ break;
+
+ default:
+
+ /* xlc puts each variable in a separate csect,
+ so we get an XTY_SD for each variable. But
+ gcc puts several variables in a csect, so
+ that each variable only gets an XTY_LD. We
+ still need to record them. This will
+ typically be XMC_RW; I suspect XMC_RO and
+ XMC_BS might be possible too. */
+ if (*namestring != '.')
+ prim_record_minimal_symbol_and_info
+ (namestring, symbol.n_value,
+ sclass == C_HIDEXT ? mst_file_data : mst_data,
+ NULL, secnum_to_section (symbol.n_scnum, objfile),
+ NULL, objfile);
+ break;
+ }
+ break;
+
+ case XTY_CM:
+ switch (csect_aux.x_csect.x_smclas)
+ {
+ case XMC_RW:
+ case XMC_BS:
+ /* Common variables are recorded in the minimal symbol
+ table, except for section symbols. */
+ if (*namestring != '.')
+ prim_record_minimal_symbol_and_info
+ (namestring, symbol.n_value,
+ sclass == C_HIDEXT ? mst_file_bss : mst_bss,
+ NULL, secnum_to_section (symbol.n_scnum, objfile),
+ NULL, objfile);
+ break;
+ }
+ break;
+
+ default:
+ break;
+ }
+ }
+ break;
+ case C_FILE:
+ {
+ unsigned int symnum_before;
+
+ symnum_before = ssymnum;
+ swap_sym (&symbol, &main_aux, &namestring, &sraw_symbol,
+ &ssymnum, objfile);
+
+ /* See if the last csect needs to be recorded. */
+
+ if (last_csect_name && !misc_func_recorded)
+ {
+
+ /* If no misc. function recorded in the last seen csect, enter
+ it as a function. This will take care of functions like
+ strcmp() compiled by xlc. */
+
+ RECORD_MINIMAL_SYMBOL
+ (last_csect_name, last_csect_val,
+ mst_text, last_csect_sec, objfile);
+ }
+
+ if (pst)
+ {
+ xcoff_end_psymtab (pst, psymtab_include_list, includes_used,
+ symnum_before, dependency_list,
+ dependencies_used, textlow_not_set);
+ includes_used = 0;
+ dependencies_used = 0;
+ }
+ first_fun_line_offset = 0;
+
+ /* XCOFF, according to the AIX 3.2 documentation, puts the
+ filename in cs->c_name. But xlc 1.3.0.2 has decided to
+ do things the standard COFF way and put it in the auxent.
+ We use the auxent if the symbol is ".file" and an auxent
+ exists, otherwise use the symbol itself. */
+ if (!strcmp (namestring, ".file") && symbol.n_numaux > 0)
+ {
+ filestring = coff_getfilename (&main_aux, objfile);
+ }
+ else
+ filestring = namestring;
+
+ pst = xcoff_start_psymtab (objfile, section_offsets,
+ filestring,
+ symnum_before,
+ objfile->global_psymbols.next,
+ objfile->static_psymbols.next);
+ last_csect_name = NULL;
+ }
+ break;
+
+ default:
+ {
+ static struct complaint msg =
+ {"Storage class %d not recognized during scan", 0, 0};
+ complain (&msg, sclass);
+ }
+ /* FALLTHROUGH */
+
+ /* C_FCN is .bf and .ef symbols. I think it is sufficient
+ to handle only the C_FUN and C_EXT. */
+ case C_FCN:
+
+ case C_BSTAT:
+ case C_ESTAT:
+ case C_ARG:
+ case C_REGPARM:
+ case C_REG:
+ case C_TPDEF:
+ case C_STRTAG:
+ case C_UNTAG:
+ case C_ENTAG:
+ case C_LABEL:
+ case C_NULL:
+
+ /* C_EINCL means we are switching back to the main file. But there
+ is no reason to care; the only thing we want to know about
+ includes is the names of all the included (.h) files. */
+ case C_EINCL:
+
+ case C_BLOCK:
+
+ /* I don't think C_STAT is used in xcoff; C_HIDEXT appears to be
+ used instead. */
+ case C_STAT:
+
+ /* I don't think the name of the common block (as opposed to the
+ variables within it) is something which is user visible
+ currently. */
+ case C_BCOMM:
+ case C_ECOMM:
+
+ case C_PSYM:
+ case C_RPSYM:
+
+ /* I think we can ignore C_LSYM; types on xcoff seem to use C_DECL
+ so C_LSYM would appear to be only for locals. */
+ case C_LSYM:
+
+ case C_AUTO:
+ case C_RSYM:
+ {
+ /* We probably could save a few instructions by assuming that
+ C_LSYM, C_PSYM, etc., never have auxents. */
+ int naux1 =
+ ((struct external_syment *)sraw_symbol)->e_numaux[0] + 1;
+ ssymnum += naux1;
+ sraw_symbol += sizeof (struct external_syment) * naux1;
+ }
+ break;
+
+ case C_BINCL:
+ stype = N_SOL;
+ goto pstab;
+
+ case C_FUN:
+ /* The value of the C_FUN is not the address of the function (it
+ appears to be the address before linking), but as long as it
+ is smaller than the actual address, then find_pc_partial_function
+ will use the minimal symbols instead. I hope. */
+
+ case C_GSYM:
+ case C_ECOML:
+ case C_DECL:
+ case C_STSYM:
+ stype = N_LSYM;
+ pstab:;
+ swap_sym (&symbol, &main_aux, &namestring, &sraw_symbol,
+ &ssymnum, objfile);
+#define CUR_SYMBOL_TYPE stype
+#define CUR_SYMBOL_VALUE symbol.n_value
+
+/* START_PSYMTAB and END_PSYMTAB are never used, because they are only
+ called from DBXREAD_ONLY or N_SO code. Likewise for the symnum
+ variable. */
+#define START_PSYMTAB(ofile,secoff,fname,low,symoff,global_syms,static_syms) 0
+#define END_PSYMTAB(pst,ilist,ninc,c_off,c_text,dep_list,n_deps,textlow_not_set)\
+ do {} while (0)
+/* We have already set the namestring. */
+#define SET_NAMESTRING() /* */
+
+#include "partial-stab.h"
+ }
+ }
+
+ if (pst)
+ {
+ xcoff_end_psymtab (pst, psymtab_include_list, includes_used,
+ ssymnum, dependency_list,
+ dependencies_used, textlow_not_set);
+ }
+
+ /* Record the toc offset value of this symbol table into objfile structure.
+ If no XMC_TC0 is found, toc_offset should be zero. Another place to obtain
+ this information would be file auxiliary header. */
+
+ ((struct coff_symfile_info *) objfile->sym_private)->toc_offset = toc_offset;
+}
+
+/* Return the toc offset value for a given objfile. */
+
+CORE_ADDR
+get_toc_offset (objfile)
+ struct objfile *objfile;
{
- if (debugsec)
- free(debugsec);
- debugsec = NULL;
+ if (objfile)
+ return ((struct coff_symfile_info *) objfile->sym_private)->toc_offset;
+ return 0;
}
+/* Scan and build partial symbols for a symbol file.
+ We have been initialized by a call to dbx_symfile_init, which
+ put all the relevant info into a "struct dbx_symfile_info",
+ hung off the objfile structure.
-/* xcoff version of symbol file read. */
+ SECTION_OFFSETS contains offsets relative to which the symbols in the
+ various sections are (depending where the sections were actually loaded).
+ MAINLINE is true if we are reading the main symbol
+ table (as opposed to a shared lib or dynamically loaded file). */
static void
-xcoff_symfile_read (objfile, section_offset, mainline)
- struct objfile *objfile;
- struct section_offset *section_offset;
- int mainline;
+xcoff_initial_scan (objfile, section_offsets, mainline)
+ struct objfile *objfile;
+ struct section_offsets *section_offsets;
+ int mainline; /* FIXME comments above */
{
+ bfd *abfd;
+ int val;
+ struct cleanup *back_to;
int num_symbols; /* # of symbols */
file_ptr symtab_offset; /* symbol table and */
file_ptr stringtab_offset; /* string table file offsets */
- int val;
- bfd *abfd;
struct coff_symfile_info *info;
char *name;
+ unsigned int size;
info = (struct coff_symfile_info *) objfile -> sym_private;
symfile_bfd = abfd = objfile->obfd;
info->max_lineno_offset = 0;
bfd_map_over_sections (abfd, find_linenos, info);
- /* FIXME! This stuff should move into symfile_init */
- if (info->min_lineno_offset != 0
- && info->max_lineno_offset > info->min_lineno_offset) {
-
- /* only read in the line # table if one exists */
- val = init_lineno(abfd, info->min_lineno_offset,
- (int) (info->max_lineno_offset - info->min_lineno_offset));
-
- if (val < 0)
- error("\"%s\": error reading line numbers\n", name);
- }
-
if (num_symbols > 0)
{
- val = init_stringtab(abfd, stringtab_offset, objfile);
- if (val < 0) {
- error ("\"%s\": can't get string table", name);
- }
+ /* Read the string table. */
+ init_stringtab (abfd, stringtab_offset, objfile);
+
+ /* Read the .debug section, if present. */
+ {
+ sec_ptr secp;
+ bfd_size_type length;
+ char *debugsec = NULL;
- if (init_debugsection(abfd) < 0) {
- error ("Error reading .debug section of `%s'\n", name);
+ secp = bfd_get_section_by_name (abfd, ".debug");
+ if (secp)
+ {
+ length = bfd_section_size (abfd, secp);
+ if (length)
+ {
+ debugsec =
+ (char *) obstack_alloc (&objfile->symbol_obstack, length);
+
+ if (!bfd_get_section_contents (abfd, secp, debugsec,
+ (file_ptr) 0, length))
+ {
+ error ("Error reading .debug section of `%s': %s",
+ name, bfd_errmsg (bfd_get_error ()));
+ }
+ }
+ }
+ ((struct coff_symfile_info *)objfile->sym_private)->debugsec =
+ debugsec;
}
}
- /* Position to read the symbol table. Do not read it all at once. */
- val = bfd_seek(abfd, symtab_offset, L_SET);
+ /* Read the symbols. We keep them in core because we will want to
+ access them randomly in read_symbol*. */
+ val = bfd_seek (abfd, symtab_offset, SEEK_SET);
if (val < 0)
- perror_with_name(name);
+ error ("Error reading symbols from %s: %s",
+ name, bfd_errmsg (bfd_get_error ()));
+ size = coff_data (abfd)->local_symesz * num_symbols;
+ ((struct coff_symfile_info *)objfile->sym_private)->symtbl =
+ obstack_alloc (&objfile->symbol_obstack, size);
+ ((struct coff_symfile_info *)objfile->sym_private)->symtbl_num_syms =
+ num_symbols;
+
+ val = bfd_read (((struct coff_symfile_info *)objfile->sym_private)->symtbl,
+ size, 1, abfd);
+ if (val != size)
+ perror_with_name ("reading symbol table");
- if (bfd_tell(abfd) != symtab_offset)
- fatal("bfd? BFD!");
+ /* If we are reinitializing, or if we have never loaded syms yet, init */
+ if (mainline
+ || objfile->global_psymbols.size == 0
+ || objfile->static_psymbols.size == 0)
+ /* I'm not sure how how good num_symbols is; the rule of thumb in
+ init_psymbol_list was developed for a.out. On the one hand,
+ num_symbols includes auxents. On the other hand, it doesn't
+ include N_SLINE. */
+ init_psymbol_list (objfile, num_symbols);
+
+ free_pending_blocks ();
+ back_to = make_cleanup (really_free_pendings, 0);
init_minimal_symbol_collection ();
make_cleanup (discard_minimal_symbols, 0);
-#ifndef FAKING_RS6000
- /* Initialize load info structure. */
- if (mainline)
- xcoff_init_loadinfo ();
-#endif
-
- /* Now that the executable file is positioned at symbol table,
- process it and define symbols accordingly. */
-
- read_xcoff_symtab(objfile, num_symbols);
+ /* Now that the symbol table data of the executable file are all in core,
+ process them and define symbols accordingly. */
- /* Free debug section. */
- free_debugsection ();
-
- /* Sort symbols alphabetically within each block. */
- sort_syms ();
+ scan_xcoff_symtab (section_offsets, objfile);
/* Install any minimal symbols that have been collected as the current
minimal symbols for this objfile. */
install_minimal_symbols (objfile);
- /* Make a default for file to list. */
- select_source_symtab (0);
+ do_cleanups (back_to);
}
-
-/* XCOFF-specific parsing routine for section offsets.
- Plain and simple for now. */
-
-static
-struct section_offsets *
+\f
+static struct section_offsets *
xcoff_symfile_offsets (objfile, addr)
struct objfile *objfile;
CORE_ADDR addr;
{
struct section_offsets *section_offsets;
int i;
-
+
+ objfile->num_sections = SECT_OFF_MAX;
section_offsets = (struct section_offsets *)
- obstack_alloc (&objfile -> psymbol_obstack,
- sizeof (struct section_offsets) +
- sizeof (section_offsets->offsets) * (SECT_OFF_MAX-1));
+ obstack_alloc
+ (&objfile -> psymbol_obstack,
+ sizeof (struct section_offsets)
+ + sizeof (section_offsets->offsets) * objfile->num_sections);
+
+ /* syms_from_objfile kindly subtracts from addr the bfd_section_vma
+ of the .text section. This strikes me as wrong--whether the
+ offset to be applied to symbol reading is relative to the start
+ address of the section depends on the symbol format. In any
+ event, this whole "addr" concept is pretty broken (it doesn't
+ handle any section but .text sensibly), so just ignore the addr
+ parameter and use 0. rs6000-nat.c will set the correct section
+ offsets via objfile_relocate. */
+ for (i = 0; i < objfile->num_sections; ++i)
+ ANOFFSET (section_offsets, i) = 0;
- for (i = 0; i < SECT_OFF_MAX; i++)
- ANOFFSET (section_offsets, i) = addr;
-
return section_offsets;
}
-/* Register our ability to parse symbols for xcoff BFD files. */
+
+/* Register our ability to parse symbols for xcoff BFD files. */
static struct sym_fns xcoff_sym_fns =
{
- "aixcoff-rs6000", /* sym_name: name or name prefix of BFD target type */
- 15, /* sym_namelen: number of significant sym_name chars */
+
+ /* Because the bfd uses coff_flavour, we need to specially kludge
+ the flavour. It is possible that coff and xcoff should be merged as
+ they do have fundamental similarities (for example, the extra storage
+ classes used for stabs could presumably be recognized in any COFF file).
+ However, in addition to obvious things like all the csect hair, there are
+ some subtler differences between xcoffread.c and coffread.c, notably
+ the fact that coffread.c has no need to read in all the symbols, but
+ xcoffread.c reads all the symbols and does in fact randomly access them
+ (in C_BSTAT and line number processing). */
+
+ (enum bfd_flavour)-1,
+
xcoff_new_init, /* sym_new_init: init anything gbl to entire symtab */
xcoff_symfile_init, /* sym_init: read initial info, setup for sym_read() */
- xcoff_symfile_read, /* sym_read: read a symbol file into symtab */
+ xcoff_initial_scan, /* sym_read: read a symbol file into symtab */
xcoff_symfile_finish, /* sym_finish: finished with file, cleanup */
xcoff_symfile_offsets, /* sym_offsets: xlate offsets ext->int form */
NULL /* next: pointer to next struct sym_fns */
{
add_symtab_fns(&xcoff_sym_fns);
- /* Initialize symbol template later used for arguments. */
- SYMBOL_NAME (&parmsym) = "";
- SYMBOL_INIT_LANGUAGE_SPECIFIC (&parmsym, language_c);
- SYMBOL_NAMESPACE (&parmsym) = VAR_NAMESPACE;
- SYMBOL_CLASS (&parmsym) = LOC_ARG;
- /* Its other fields are zero, or are filled in later. */
+ func_symbol_type = init_type (TYPE_CODE_FUNC, 1, 0,
+ "<function, no debug info>", NULL);
+ TYPE_TARGET_TYPE (func_symbol_type) = builtin_type_int;
+ var_symbol_type =
+ init_type (TYPE_CODE_INT, TARGET_INT_BIT / HOST_CHAR_BIT, 0,
+ "<variable, no debug info>", NULL);
}